1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  *   Copyright (C) 2016 T-Platforms. All Rights Reserved.
4  *
5  * IDT PCIe-switch NTB Linux driver
6  *
7  * Contact Information:
8  * Serge Semin <fancer.lancer@gmail.com>, <Sergey.Semin@t-platforms.ru>
9  */
10 /*
11  *           NOTE of the IDT 89HPESx SMBus-slave interface driver
12  *    This driver primarily is developed to have an access to EEPROM device of
13  * IDT PCIe-switches. IDT provides a simple SMBus interface to perform IO-
14  * operations from/to EEPROM, which is located at private (so called Master)
15  * SMBus of switches. Using that interface this the driver creates a simple
16  * binary sysfs-file in the device directory:
17  * /sys/bus/i2c/devices/<bus>-<devaddr>/eeprom
18  * In case if read-only flag is specified in the dts-node of device desription,
19  * User-space applications won't be able to write to the EEPROM sysfs-node.
20  *    Additionally IDT 89HPESx SMBus interface has an ability to write/read
21  * data of device CSRs. This driver exposes debugf-file to perform simple IO
22  * operations using that ability for just basic debug purpose. Particularly
23  * next file is created in the specific debugfs-directory:
24  * /sys/kernel/debug/idt_csr/
25  * Format of the debugfs-node is:
26  * $ cat /sys/kernel/debug/idt_csr/<bus>-<devaddr>/<devname>;
27  * <CSR address>:<CSR value>
28  * So reading the content of the file gives current CSR address and it value.
29  * If User-space application wishes to change current CSR address,
30  * it can just write a proper value to the sysfs-file:
31  * $ echo "<CSR address>" > /sys/kernel/debug/idt_csr/<bus>-<devaddr>/<devname>
32  * If it wants to change the CSR value as well, the format of the write
33  * operation is:
34  * $ echo "<CSR address>:<CSR value>" > \
35  *        /sys/kernel/debug/idt_csr/<bus>-<devaddr>/<devname>;
36  * CSR address and value can be any of hexadecimal, decimal or octal format.
37  */
38 
39 #include <linux/kernel.h>
40 #include <linux/init.h>
41 #include <linux/module.h>
42 #include <linux/types.h>
43 #include <linux/sizes.h>
44 #include <linux/slab.h>
45 #include <linux/mutex.h>
46 #include <linux/sysfs.h>
47 #include <linux/debugfs.h>
48 #include <linux/mod_devicetable.h>
49 #include <linux/property.h>
50 #include <linux/i2c.h>
51 #include <linux/pci_ids.h>
52 #include <linux/delay.h>
53 
54 #define IDT_NAME		"89hpesx"
55 #define IDT_89HPESX_DESC	"IDT 89HPESx SMBus-slave interface driver"
56 #define IDT_89HPESX_VER		"1.0"
57 
58 MODULE_DESCRIPTION(IDT_89HPESX_DESC);
59 MODULE_VERSION(IDT_89HPESX_VER);
60 MODULE_LICENSE("GPL v2");
61 MODULE_AUTHOR("T-platforms");
62 
63 /*
64  * csr_dbgdir - CSR read/write operations Debugfs directory
65  */
66 static struct dentry *csr_dbgdir;
67 
68 /*
69  * struct idt_89hpesx_dev - IDT 89HPESx device data structure
70  * @eesize:	Size of EEPROM in bytes (calculated from "idt,eecompatible")
71  * @eero:	EEPROM Read-only flag
72  * @eeaddr:	EEPROM custom address
73  *
74  * @inieecmd:	Initial cmd value for EEPROM read/write operations
75  * @inicsrcmd:	Initial cmd value for CSR read/write operations
76  * @iniccode:	Initialial command code value for IO-operations
77  *
78  * @csr:	CSR address to perform read operation
79  *
80  * @smb_write:	SMBus write method
81  * @smb_read:	SMBus read method
82  * @smb_mtx:	SMBus mutex
83  *
84  * @client:	i2c client used to perform IO operations
85  *
86  * @ee_file:	EEPROM read/write sysfs-file
87  */
88 struct idt_smb_seq;
89 struct idt_89hpesx_dev {
90 	u32 eesize;
91 	bool eero;
92 	u8 eeaddr;
93 
94 	u8 inieecmd;
95 	u8 inicsrcmd;
96 	u8 iniccode;
97 
98 	u16 csr;
99 
100 	int (*smb_write)(struct idt_89hpesx_dev *, const struct idt_smb_seq *);
101 	int (*smb_read)(struct idt_89hpesx_dev *, struct idt_smb_seq *);
102 	struct mutex smb_mtx;
103 
104 	struct i2c_client *client;
105 
106 	struct bin_attribute *ee_file;
107 	struct dentry *csr_dir;
108 };
109 
110 /*
111  * struct idt_smb_seq - sequence of data to be read/written from/to IDT 89HPESx
112  * @ccode:	SMBus command code
113  * @bytecnt:	Byte count of operation
114  * @data:	Data to by written
115  */
116 struct idt_smb_seq {
117 	u8 ccode;
118 	u8 bytecnt;
119 	u8 *data;
120 };
121 
122 /*
123  * struct idt_eeprom_seq - sequence of data to be read/written from/to EEPROM
124  * @cmd:	Transaction CMD
125  * @eeaddr:	EEPROM custom address
126  * @memaddr:	Internal memory address of EEPROM
127  * @data:	Data to be written at the memory address
128  */
129 struct idt_eeprom_seq {
130 	u8 cmd;
131 	u8 eeaddr;
132 	u16 memaddr;
133 	u8 data;
134 } __packed;
135 
136 /*
137  * struct idt_csr_seq - sequence of data to be read/written from/to CSR
138  * @cmd:	Transaction CMD
139  * @csraddr:	Internal IDT device CSR address
140  * @data:	Data to be read/written from/to the CSR address
141  */
142 struct idt_csr_seq {
143 	u8 cmd;
144 	u16 csraddr;
145 	u32 data;
146 } __packed;
147 
148 /*
149  * SMBus command code macros
150  * @CCODE_END:		Indicates the end of transaction
151  * @CCODE_START:	Indicates the start of transaction
152  * @CCODE_CSR:		CSR read/write transaction
153  * @CCODE_EEPROM:	EEPROM read/write transaction
154  * @CCODE_BYTE:		Supplied data has BYTE length
155  * @CCODE_WORD:		Supplied data has WORD length
156  * @CCODE_BLOCK:	Supplied data has variable length passed in bytecnt
157  *			byte right following CCODE byte
158  */
159 #define CCODE_END	((u8)0x01)
160 #define CCODE_START	((u8)0x02)
161 #define CCODE_CSR	((u8)0x00)
162 #define CCODE_EEPROM	((u8)0x04)
163 #define CCODE_BYTE	((u8)0x00)
164 #define CCODE_WORD	((u8)0x20)
165 #define CCODE_BLOCK	((u8)0x40)
166 #define CCODE_PEC	((u8)0x80)
167 
168 /*
169  * EEPROM command macros
170  * @EEPROM_OP_WRITE:	EEPROM write operation
171  * @EEPROM_OP_READ:	EEPROM read operation
172  * @EEPROM_USA:		Use specified address of EEPROM
173  * @EEPROM_NAERR:	EEPROM device is not ready to respond
174  * @EEPROM_LAERR:	EEPROM arbitration loss error
175  * @EEPROM_MSS:		EEPROM misplace start & stop bits error
176  * @EEPROM_WR_CNT:	Bytes count to perform write operation
177  * @EEPROM_WRRD_CNT:	Bytes count to write before reading
178  * @EEPROM_RD_CNT:	Bytes count to perform read operation
179  * @EEPROM_DEF_SIZE:	Fall back size of EEPROM
180  * @EEPROM_DEF_ADDR:	Defatul EEPROM address
181  * @EEPROM_TOUT:	Timeout before retry read operation if eeprom is busy
182  */
183 #define EEPROM_OP_WRITE	((u8)0x00)
184 #define EEPROM_OP_READ	((u8)0x01)
185 #define EEPROM_USA	((u8)0x02)
186 #define EEPROM_NAERR	((u8)0x08)
187 #define EEPROM_LAERR    ((u8)0x10)
188 #define EEPROM_MSS	((u8)0x20)
189 #define EEPROM_WR_CNT	((u8)5)
190 #define EEPROM_WRRD_CNT	((u8)4)
191 #define EEPROM_RD_CNT	((u8)5)
192 #define EEPROM_DEF_SIZE	((u16)4096)
193 #define EEPROM_DEF_ADDR	((u8)0x50)
194 #define EEPROM_TOUT	(100)
195 
196 /*
197  * CSR command macros
198  * @CSR_DWE:		Enable all four bytes of the operation
199  * @CSR_OP_WRITE:	CSR write operation
200  * @CSR_OP_READ:	CSR read operation
201  * @CSR_RERR:		Read operation error
202  * @CSR_WERR:		Write operation error
203  * @CSR_WR_CNT:		Bytes count to perform write operation
204  * @CSR_WRRD_CNT:	Bytes count to write before reading
205  * @CSR_RD_CNT:		Bytes count to perform read operation
206  * @CSR_MAX:		Maximum CSR address
207  * @CSR_DEF:		Default CSR address
208  * @CSR_REAL_ADDR:	CSR real unshifted address
209  */
210 #define CSR_DWE			((u8)0x0F)
211 #define CSR_OP_WRITE		((u8)0x00)
212 #define CSR_OP_READ		((u8)0x10)
213 #define CSR_RERR		((u8)0x40)
214 #define CSR_WERR		((u8)0x80)
215 #define CSR_WR_CNT		((u8)7)
216 #define CSR_WRRD_CNT		((u8)3)
217 #define CSR_RD_CNT		((u8)7)
218 #define CSR_MAX			((u32)0x3FFFF)
219 #define CSR_DEF			((u16)0x0000)
220 #define CSR_REAL_ADDR(val)	((unsigned int)val << 2)
221 
222 /*
223  * IDT 89HPESx basic register
224  * @IDT_VIDDID_CSR:	PCIe VID and DID of IDT 89HPESx
225  * @IDT_VID_MASK:	Mask of VID
226  */
227 #define IDT_VIDDID_CSR	((u32)0x0000)
228 #define IDT_VID_MASK	((u32)0xFFFF)
229 
230 /*
231  * IDT 89HPESx can send NACK when new command is sent before previous one
232  * fininshed execution. In this case driver retries operation
233  * certain times.
234  * @RETRY_CNT:		Number of retries before giving up and fail
235  * @idt_smb_safe:	Generate a retry loop on corresponding SMBus method
236  */
237 #define RETRY_CNT (128)
238 #define idt_smb_safe(ops, args...) ({ \
239 	int __retry = RETRY_CNT; \
240 	s32 __sts; \
241 	do { \
242 		__sts = i2c_smbus_ ## ops ## _data(args); \
243 	} while (__retry-- && __sts < 0); \
244 	__sts; \
245 })
246 
247 /*===========================================================================
248  *                         i2c bus level IO-operations
249  *===========================================================================
250  */
251 
252 /*
253  * idt_smb_write_byte() - SMBus write method when I2C_SMBUS_BYTE_DATA operation
254  *                        is only available
255  * @pdev:	Pointer to the driver data
256  * @seq:	Sequence of data to be written
257  */
258 static int idt_smb_write_byte(struct idt_89hpesx_dev *pdev,
259 			      const struct idt_smb_seq *seq)
260 {
261 	s32 sts;
262 	u8 ccode;
263 	int idx;
264 
265 	/* Loop over the supplied data sending byte one-by-one */
266 	for (idx = 0; idx < seq->bytecnt; idx++) {
267 		/* Collect the command code byte */
268 		ccode = seq->ccode | CCODE_BYTE;
269 		if (idx == 0)
270 			ccode |= CCODE_START;
271 		if (idx == seq->bytecnt - 1)
272 			ccode |= CCODE_END;
273 
274 		/* Send data to the device */
275 		sts = idt_smb_safe(write_byte, pdev->client, ccode,
276 			seq->data[idx]);
277 		if (sts != 0)
278 			return (int)sts;
279 	}
280 
281 	return 0;
282 }
283 
284 /*
285  * idt_smb_read_byte() - SMBus read method when I2C_SMBUS_BYTE_DATA operation
286  *                        is only available
287  * @pdev:	Pointer to the driver data
288  * @seq:	Buffer to read data to
289  */
290 static int idt_smb_read_byte(struct idt_89hpesx_dev *pdev,
291 			     struct idt_smb_seq *seq)
292 {
293 	s32 sts;
294 	u8 ccode;
295 	int idx;
296 
297 	/* Loop over the supplied buffer receiving byte one-by-one */
298 	for (idx = 0; idx < seq->bytecnt; idx++) {
299 		/* Collect the command code byte */
300 		ccode = seq->ccode | CCODE_BYTE;
301 		if (idx == 0)
302 			ccode |= CCODE_START;
303 		if (idx == seq->bytecnt - 1)
304 			ccode |= CCODE_END;
305 
306 		/* Read data from the device */
307 		sts = idt_smb_safe(read_byte, pdev->client, ccode);
308 		if (sts < 0)
309 			return (int)sts;
310 
311 		seq->data[idx] = (u8)sts;
312 	}
313 
314 	return 0;
315 }
316 
317 /*
318  * idt_smb_write_word() - SMBus write method when I2C_SMBUS_BYTE_DATA and
319  *                        I2C_FUNC_SMBUS_WORD_DATA operations are available
320  * @pdev:	Pointer to the driver data
321  * @seq:	Sequence of data to be written
322  */
323 static int idt_smb_write_word(struct idt_89hpesx_dev *pdev,
324 			      const struct idt_smb_seq *seq)
325 {
326 	s32 sts;
327 	u8 ccode;
328 	int idx, evencnt;
329 
330 	/* Calculate the even count of data to send */
331 	evencnt = seq->bytecnt - (seq->bytecnt % 2);
332 
333 	/* Loop over the supplied data sending two bytes at a time */
334 	for (idx = 0; idx < evencnt; idx += 2) {
335 		/* Collect the command code byte */
336 		ccode = seq->ccode | CCODE_WORD;
337 		if (idx == 0)
338 			ccode |= CCODE_START;
339 		if (idx == evencnt - 2)
340 			ccode |= CCODE_END;
341 
342 		/* Send word data to the device */
343 		sts = idt_smb_safe(write_word, pdev->client, ccode,
344 			*(u16 *)&seq->data[idx]);
345 		if (sts != 0)
346 			return (int)sts;
347 	}
348 
349 	/* If there is odd number of bytes then send just one last byte */
350 	if (seq->bytecnt != evencnt) {
351 		/* Collect the command code byte */
352 		ccode = seq->ccode | CCODE_BYTE | CCODE_END;
353 		if (idx == 0)
354 			ccode |= CCODE_START;
355 
356 		/* Send byte data to the device */
357 		sts = idt_smb_safe(write_byte, pdev->client, ccode,
358 			seq->data[idx]);
359 		if (sts != 0)
360 			return (int)sts;
361 	}
362 
363 	return 0;
364 }
365 
366 /*
367  * idt_smb_read_word() - SMBus read method when I2C_SMBUS_BYTE_DATA and
368  *                       I2C_FUNC_SMBUS_WORD_DATA operations are available
369  * @pdev:	Pointer to the driver data
370  * @seq:	Buffer to read data to
371  */
372 static int idt_smb_read_word(struct idt_89hpesx_dev *pdev,
373 			     struct idt_smb_seq *seq)
374 {
375 	s32 sts;
376 	u8 ccode;
377 	int idx, evencnt;
378 
379 	/* Calculate the even count of data to send */
380 	evencnt = seq->bytecnt - (seq->bytecnt % 2);
381 
382 	/* Loop over the supplied data reading two bytes at a time */
383 	for (idx = 0; idx < evencnt; idx += 2) {
384 		/* Collect the command code byte */
385 		ccode = seq->ccode | CCODE_WORD;
386 		if (idx == 0)
387 			ccode |= CCODE_START;
388 		if (idx == evencnt - 2)
389 			ccode |= CCODE_END;
390 
391 		/* Read word data from the device */
392 		sts = idt_smb_safe(read_word, pdev->client, ccode);
393 		if (sts < 0)
394 			return (int)sts;
395 
396 		*(u16 *)&seq->data[idx] = (u16)sts;
397 	}
398 
399 	/* If there is odd number of bytes then receive just one last byte */
400 	if (seq->bytecnt != evencnt) {
401 		/* Collect the command code byte */
402 		ccode = seq->ccode | CCODE_BYTE | CCODE_END;
403 		if (idx == 0)
404 			ccode |= CCODE_START;
405 
406 		/* Read last data byte from the device */
407 		sts = idt_smb_safe(read_byte, pdev->client, ccode);
408 		if (sts < 0)
409 			return (int)sts;
410 
411 		seq->data[idx] = (u8)sts;
412 	}
413 
414 	return 0;
415 }
416 
417 /*
418  * idt_smb_write_block() - SMBus write method when I2C_SMBUS_BLOCK_DATA
419  *                         operation is available
420  * @pdev:	Pointer to the driver data
421  * @seq:	Sequence of data to be written
422  */
423 static int idt_smb_write_block(struct idt_89hpesx_dev *pdev,
424 			       const struct idt_smb_seq *seq)
425 {
426 	u8 ccode;
427 
428 	/* Return error if too much data passed to send */
429 	if (seq->bytecnt > I2C_SMBUS_BLOCK_MAX)
430 		return -EINVAL;
431 
432 	/* Collect the command code byte */
433 	ccode = seq->ccode | CCODE_BLOCK | CCODE_START | CCODE_END;
434 
435 	/* Send block of data to the device */
436 	return idt_smb_safe(write_block, pdev->client, ccode, seq->bytecnt,
437 		seq->data);
438 }
439 
440 /*
441  * idt_smb_read_block() - SMBus read method when I2C_SMBUS_BLOCK_DATA
442  *                        operation is available
443  * @pdev:	Pointer to the driver data
444  * @seq:	Buffer to read data to
445  */
446 static int idt_smb_read_block(struct idt_89hpesx_dev *pdev,
447 			      struct idt_smb_seq *seq)
448 {
449 	s32 sts;
450 	u8 ccode;
451 
452 	/* Return error if too much data passed to send */
453 	if (seq->bytecnt > I2C_SMBUS_BLOCK_MAX)
454 		return -EINVAL;
455 
456 	/* Collect the command code byte */
457 	ccode = seq->ccode | CCODE_BLOCK | CCODE_START | CCODE_END;
458 
459 	/* Read block of data from the device */
460 	sts = idt_smb_safe(read_block, pdev->client, ccode, seq->data);
461 	if (sts != seq->bytecnt)
462 		return (sts < 0 ? sts : -ENODATA);
463 
464 	return 0;
465 }
466 
467 /*
468  * idt_smb_write_i2c_block() - SMBus write method when I2C_SMBUS_I2C_BLOCK_DATA
469  *                             operation is available
470  * @pdev:	Pointer to the driver data
471  * @seq:	Sequence of data to be written
472  *
473  * NOTE It's usual SMBus write block operation, except the actual data length is
474  * sent as first byte of data
475  */
476 static int idt_smb_write_i2c_block(struct idt_89hpesx_dev *pdev,
477 				   const struct idt_smb_seq *seq)
478 {
479 	u8 ccode, buf[I2C_SMBUS_BLOCK_MAX + 1];
480 
481 	/* Return error if too much data passed to send */
482 	if (seq->bytecnt > I2C_SMBUS_BLOCK_MAX)
483 		return -EINVAL;
484 
485 	/* Collect the data to send. Length byte must be added prior the data */
486 	buf[0] = seq->bytecnt;
487 	memcpy(&buf[1], seq->data, seq->bytecnt);
488 
489 	/* Collect the command code byte */
490 	ccode = seq->ccode | CCODE_BLOCK | CCODE_START | CCODE_END;
491 
492 	/* Send length and block of data to the device */
493 	return idt_smb_safe(write_i2c_block, pdev->client, ccode,
494 		seq->bytecnt + 1, buf);
495 }
496 
497 /*
498  * idt_smb_read_i2c_block() - SMBus read method when I2C_SMBUS_I2C_BLOCK_DATA
499  *                            operation is available
500  * @pdev:	Pointer to the driver data
501  * @seq:	Buffer to read data to
502  *
503  * NOTE It's usual SMBus read block operation, except the actual data length is
504  * retrieved as first byte of data
505  */
506 static int idt_smb_read_i2c_block(struct idt_89hpesx_dev *pdev,
507 				  struct idt_smb_seq *seq)
508 {
509 	u8 ccode, buf[I2C_SMBUS_BLOCK_MAX + 1];
510 	s32 sts;
511 
512 	/* Return error if too much data passed to send */
513 	if (seq->bytecnt > I2C_SMBUS_BLOCK_MAX)
514 		return -EINVAL;
515 
516 	/* Collect the command code byte */
517 	ccode = seq->ccode | CCODE_BLOCK | CCODE_START | CCODE_END;
518 
519 	/* Read length and block of data from the device */
520 	sts = idt_smb_safe(read_i2c_block, pdev->client, ccode,
521 		seq->bytecnt + 1, buf);
522 	if (sts != seq->bytecnt + 1)
523 		return (sts < 0 ? sts : -ENODATA);
524 	if (buf[0] != seq->bytecnt)
525 		return -ENODATA;
526 
527 	/* Copy retrieved data to the output data buffer */
528 	memcpy(seq->data, &buf[1], seq->bytecnt);
529 
530 	return 0;
531 }
532 
533 /*===========================================================================
534  *                          EEPROM IO-operations
535  *===========================================================================
536  */
537 
538 /*
539  * idt_eeprom_read_byte() - read just one byte from EEPROM
540  * @pdev:	Pointer to the driver data
541  * @memaddr:	Start EEPROM memory address
542  * @data:	Data to be written to EEPROM
543  */
544 static int idt_eeprom_read_byte(struct idt_89hpesx_dev *pdev, u16 memaddr,
545 				u8 *data)
546 {
547 	struct device *dev = &pdev->client->dev;
548 	struct idt_eeprom_seq eeseq;
549 	struct idt_smb_seq smbseq;
550 	int ret, retry;
551 
552 	/* Initialize SMBus sequence fields */
553 	smbseq.ccode = pdev->iniccode | CCODE_EEPROM;
554 	smbseq.data = (u8 *)&eeseq;
555 
556 	/*
557 	 * Sometimes EEPROM may respond with NACK if it's busy with previous
558 	 * operation, so we need to perform a few attempts of read cycle
559 	 */
560 	retry = RETRY_CNT;
561 	do {
562 		/* Send EEPROM memory address to read data from */
563 		smbseq.bytecnt = EEPROM_WRRD_CNT;
564 		eeseq.cmd = pdev->inieecmd | EEPROM_OP_READ;
565 		eeseq.eeaddr = pdev->eeaddr;
566 		eeseq.memaddr = cpu_to_le16(memaddr);
567 		ret = pdev->smb_write(pdev, &smbseq);
568 		if (ret != 0) {
569 			dev_err(dev, "Failed to init eeprom addr 0x%02hhx",
570 				memaddr);
571 			break;
572 		}
573 
574 		/* Perform read operation */
575 		smbseq.bytecnt = EEPROM_RD_CNT;
576 		ret = pdev->smb_read(pdev, &smbseq);
577 		if (ret != 0) {
578 			dev_err(dev, "Failed to read eeprom data 0x%02hhx",
579 				memaddr);
580 			break;
581 		}
582 
583 		/* Restart read operation if the device is busy */
584 		if (retry && (eeseq.cmd & EEPROM_NAERR)) {
585 			dev_dbg(dev, "EEPROM busy, retry reading after %d ms",
586 				EEPROM_TOUT);
587 			msleep(EEPROM_TOUT);
588 			continue;
589 		}
590 
591 		/* Check whether IDT successfully read data from EEPROM */
592 		if (eeseq.cmd & (EEPROM_NAERR | EEPROM_LAERR | EEPROM_MSS)) {
593 			dev_err(dev,
594 				"Communication with eeprom failed, cmd 0x%hhx",
595 				eeseq.cmd);
596 			ret = -EREMOTEIO;
597 			break;
598 		}
599 
600 		/* Save retrieved data and exit the loop */
601 		*data = eeseq.data;
602 		break;
603 	} while (retry--);
604 
605 	/* Return the status of operation */
606 	return ret;
607 }
608 
609 /*
610  * idt_eeprom_write() - EEPROM write operation
611  * @pdev:	Pointer to the driver data
612  * @memaddr:	Start EEPROM memory address
613  * @len:	Length of data to be written
614  * @data:	Data to be written to EEPROM
615  */
616 static int idt_eeprom_write(struct idt_89hpesx_dev *pdev, u16 memaddr, u16 len,
617 			    const u8 *data)
618 {
619 	struct device *dev = &pdev->client->dev;
620 	struct idt_eeprom_seq eeseq;
621 	struct idt_smb_seq smbseq;
622 	int ret;
623 	u16 idx;
624 
625 	/* Initialize SMBus sequence fields */
626 	smbseq.ccode = pdev->iniccode | CCODE_EEPROM;
627 	smbseq.data = (u8 *)&eeseq;
628 
629 	/* Send data byte-by-byte, checking if it is successfully written */
630 	for (idx = 0; idx < len; idx++, memaddr++) {
631 		/* Lock IDT SMBus device */
632 		mutex_lock(&pdev->smb_mtx);
633 
634 		/* Perform write operation */
635 		smbseq.bytecnt = EEPROM_WR_CNT;
636 		eeseq.cmd = pdev->inieecmd | EEPROM_OP_WRITE;
637 		eeseq.eeaddr = pdev->eeaddr;
638 		eeseq.memaddr = cpu_to_le16(memaddr);
639 		eeseq.data = data[idx];
640 		ret = pdev->smb_write(pdev, &smbseq);
641 		if (ret != 0) {
642 			dev_err(dev,
643 				"Failed to write 0x%04hx:0x%02hhx to eeprom",
644 				memaddr, data[idx]);
645 			goto err_mutex_unlock;
646 		}
647 
648 		/*
649 		 * Check whether the data is successfully written by reading
650 		 * from the same EEPROM memory address.
651 		 */
652 		eeseq.data = ~data[idx];
653 		ret = idt_eeprom_read_byte(pdev, memaddr, &eeseq.data);
654 		if (ret != 0)
655 			goto err_mutex_unlock;
656 
657 		/* Check whether the read byte is the same as written one */
658 		if (eeseq.data != data[idx]) {
659 			dev_err(dev, "Values don't match 0x%02hhx != 0x%02hhx",
660 				eeseq.data, data[idx]);
661 			ret = -EREMOTEIO;
662 			goto err_mutex_unlock;
663 		}
664 
665 		/* Unlock IDT SMBus device */
666 err_mutex_unlock:
667 		mutex_unlock(&pdev->smb_mtx);
668 		if (ret != 0)
669 			return ret;
670 	}
671 
672 	return 0;
673 }
674 
675 /*
676  * idt_eeprom_read() - EEPROM read operation
677  * @pdev:	Pointer to the driver data
678  * @memaddr:	Start EEPROM memory address
679  * @len:	Length of data to read
680  * @buf:	Buffer to read data to
681  */
682 static int idt_eeprom_read(struct idt_89hpesx_dev *pdev, u16 memaddr, u16 len,
683 			   u8 *buf)
684 {
685 	int ret;
686 	u16 idx;
687 
688 	/* Read data byte-by-byte, retrying if it wasn't successful */
689 	for (idx = 0; idx < len; idx++, memaddr++) {
690 		/* Lock IDT SMBus device */
691 		mutex_lock(&pdev->smb_mtx);
692 
693 		/* Just read the byte to the buffer */
694 		ret = idt_eeprom_read_byte(pdev, memaddr, &buf[idx]);
695 
696 		/* Unlock IDT SMBus device */
697 		mutex_unlock(&pdev->smb_mtx);
698 
699 		/* Return error if read operation failed */
700 		if (ret != 0)
701 			return ret;
702 	}
703 
704 	return 0;
705 }
706 
707 /*===========================================================================
708  *                          CSR IO-operations
709  *===========================================================================
710  */
711 
712 /*
713  * idt_csr_write() - CSR write operation
714  * @pdev:	Pointer to the driver data
715  * @csraddr:	CSR address (with no two LS bits)
716  * @data:	Data to be written to CSR
717  */
718 static int idt_csr_write(struct idt_89hpesx_dev *pdev, u16 csraddr,
719 			 const u32 data)
720 {
721 	struct device *dev = &pdev->client->dev;
722 	struct idt_csr_seq csrseq;
723 	struct idt_smb_seq smbseq;
724 	int ret;
725 
726 	/* Initialize SMBus sequence fields */
727 	smbseq.ccode = pdev->iniccode | CCODE_CSR;
728 	smbseq.data = (u8 *)&csrseq;
729 
730 	/* Lock IDT SMBus device */
731 	mutex_lock(&pdev->smb_mtx);
732 
733 	/* Perform write operation */
734 	smbseq.bytecnt = CSR_WR_CNT;
735 	csrseq.cmd = pdev->inicsrcmd | CSR_OP_WRITE;
736 	csrseq.csraddr = cpu_to_le16(csraddr);
737 	csrseq.data = cpu_to_le32(data);
738 	ret = pdev->smb_write(pdev, &smbseq);
739 	if (ret != 0) {
740 		dev_err(dev, "Failed to write 0x%04x: 0x%04x to csr",
741 			CSR_REAL_ADDR(csraddr), data);
742 		goto err_mutex_unlock;
743 	}
744 
745 	/* Send CSR address to read data from */
746 	smbseq.bytecnt = CSR_WRRD_CNT;
747 	csrseq.cmd = pdev->inicsrcmd | CSR_OP_READ;
748 	ret = pdev->smb_write(pdev, &smbseq);
749 	if (ret != 0) {
750 		dev_err(dev, "Failed to init csr address 0x%04x",
751 			CSR_REAL_ADDR(csraddr));
752 		goto err_mutex_unlock;
753 	}
754 
755 	/* Perform read operation */
756 	smbseq.bytecnt = CSR_RD_CNT;
757 	ret = pdev->smb_read(pdev, &smbseq);
758 	if (ret != 0) {
759 		dev_err(dev, "Failed to read csr 0x%04x",
760 			CSR_REAL_ADDR(csraddr));
761 		goto err_mutex_unlock;
762 	}
763 
764 	/* Check whether IDT successfully retrieved CSR data */
765 	if (csrseq.cmd & (CSR_RERR | CSR_WERR)) {
766 		dev_err(dev, "IDT failed to perform CSR r/w");
767 		ret = -EREMOTEIO;
768 		goto err_mutex_unlock;
769 	}
770 
771 	/* Unlock IDT SMBus device */
772 err_mutex_unlock:
773 	mutex_unlock(&pdev->smb_mtx);
774 
775 	return ret;
776 }
777 
778 /*
779  * idt_csr_read() - CSR read operation
780  * @pdev:	Pointer to the driver data
781  * @csraddr:	CSR address (with no two LS bits)
782  * @data:	Data to be written to CSR
783  */
784 static int idt_csr_read(struct idt_89hpesx_dev *pdev, u16 csraddr, u32 *data)
785 {
786 	struct device *dev = &pdev->client->dev;
787 	struct idt_csr_seq csrseq;
788 	struct idt_smb_seq smbseq;
789 	int ret;
790 
791 	/* Initialize SMBus sequence fields */
792 	smbseq.ccode = pdev->iniccode | CCODE_CSR;
793 	smbseq.data = (u8 *)&csrseq;
794 
795 	/* Lock IDT SMBus device */
796 	mutex_lock(&pdev->smb_mtx);
797 
798 	/* Send CSR register address before reading it */
799 	smbseq.bytecnt = CSR_WRRD_CNT;
800 	csrseq.cmd = pdev->inicsrcmd | CSR_OP_READ;
801 	csrseq.csraddr = cpu_to_le16(csraddr);
802 	ret = pdev->smb_write(pdev, &smbseq);
803 	if (ret != 0) {
804 		dev_err(dev, "Failed to init csr address 0x%04x",
805 			CSR_REAL_ADDR(csraddr));
806 		goto err_mutex_unlock;
807 	}
808 
809 	/* Perform read operation */
810 	smbseq.bytecnt = CSR_RD_CNT;
811 	ret = pdev->smb_read(pdev, &smbseq);
812 	if (ret != 0) {
813 		dev_err(dev, "Failed to read csr 0x%04hx",
814 			CSR_REAL_ADDR(csraddr));
815 		goto err_mutex_unlock;
816 	}
817 
818 	/* Check whether IDT successfully retrieved CSR data */
819 	if (csrseq.cmd & (CSR_RERR | CSR_WERR)) {
820 		dev_err(dev, "IDT failed to perform CSR r/w");
821 		ret = -EREMOTEIO;
822 		goto err_mutex_unlock;
823 	}
824 
825 	/* Save data retrieved from IDT */
826 	*data = le32_to_cpu(csrseq.data);
827 
828 	/* Unlock IDT SMBus device */
829 err_mutex_unlock:
830 	mutex_unlock(&pdev->smb_mtx);
831 
832 	return ret;
833 }
834 
835 /*===========================================================================
836  *                          Sysfs/debugfs-nodes IO-operations
837  *===========================================================================
838  */
839 
840 /*
841  * eeprom_write() - EEPROM sysfs-node write callback
842  * @filep:	Pointer to the file system node
843  * @kobj:	Pointer to the kernel object related to the sysfs-node
844  * @attr:	Attributes of the file
845  * @buf:	Buffer to write data to
846  * @off:	Offset at which data should be written to
847  * @count:	Number of bytes to write
848  */
849 static ssize_t eeprom_write(struct file *filp, struct kobject *kobj,
850 			    struct bin_attribute *attr,
851 			    char *buf, loff_t off, size_t count)
852 {
853 	struct idt_89hpesx_dev *pdev;
854 	int ret;
855 
856 	/* Retrieve driver data */
857 	pdev = dev_get_drvdata(kobj_to_dev(kobj));
858 
859 	/* Perform EEPROM write operation */
860 	ret = idt_eeprom_write(pdev, (u16)off, (u16)count, (u8 *)buf);
861 	return (ret != 0 ? ret : count);
862 }
863 
864 /*
865  * eeprom_read() - EEPROM sysfs-node read callback
866  * @filep:	Pointer to the file system node
867  * @kobj:	Pointer to the kernel object related to the sysfs-node
868  * @attr:	Attributes of the file
869  * @buf:	Buffer to write data to
870  * @off:	Offset at which data should be written to
871  * @count:	Number of bytes to write
872  */
873 static ssize_t eeprom_read(struct file *filp, struct kobject *kobj,
874 			   struct bin_attribute *attr,
875 			   char *buf, loff_t off, size_t count)
876 {
877 	struct idt_89hpesx_dev *pdev;
878 	int ret;
879 
880 	/* Retrieve driver data */
881 	pdev = dev_get_drvdata(kobj_to_dev(kobj));
882 
883 	/* Perform EEPROM read operation */
884 	ret = idt_eeprom_read(pdev, (u16)off, (u16)count, (u8 *)buf);
885 	return (ret != 0 ? ret : count);
886 }
887 
888 /*
889  * idt_dbgfs_csr_write() - CSR debugfs-node write callback
890  * @filep:	Pointer to the file system file descriptor
891  * @buf:	Buffer to read data from
892  * @count:	Size of the buffer
893  * @offp:	Offset within the file
894  *
895  * It accepts either "0x<reg addr>:0x<value>" for saving register address
896  * and writing value to specified DWORD register or "0x<reg addr>" for
897  * just saving register address in order to perform next read operation.
898  *
899  * WARNING No spaces are allowed. Incoming string must be strictly formated as:
900  * "<reg addr>:<value>". Register address must be aligned within 4 bytes
901  * (one DWORD).
902  */
903 static ssize_t idt_dbgfs_csr_write(struct file *filep, const char __user *ubuf,
904 				   size_t count, loff_t *offp)
905 {
906 	struct idt_89hpesx_dev *pdev = filep->private_data;
907 	char *colon_ch, *csraddr_str, *csrval_str;
908 	int ret, csraddr_len;
909 	u32 csraddr, csrval;
910 	char *buf;
911 
912 	/* Copy data from User-space */
913 	buf = kmalloc(count + 1, GFP_KERNEL);
914 	if (!buf)
915 		return -ENOMEM;
916 
917 	ret = simple_write_to_buffer(buf, count, offp, ubuf, count);
918 	if (ret < 0)
919 		goto free_buf;
920 	buf[count] = 0;
921 
922 	/* Find position of colon in the buffer */
923 	colon_ch = strnchr(buf, count, ':');
924 
925 	/*
926 	 * If there is colon passed then new CSR value should be parsed as
927 	 * well, so allocate buffer for CSR address substring.
928 	 * If no colon is found, then string must have just one number with
929 	 * no new CSR value
930 	 */
931 	if (colon_ch != NULL) {
932 		csraddr_len = colon_ch - buf;
933 		csraddr_str =
934 			kmalloc(csraddr_len + 1, GFP_KERNEL);
935 		if (csraddr_str == NULL) {
936 			ret = -ENOMEM;
937 			goto free_buf;
938 		}
939 		/* Copy the register address to the substring buffer */
940 		strncpy(csraddr_str, buf, csraddr_len);
941 		csraddr_str[csraddr_len] = '\0';
942 		/* Register value must follow the colon */
943 		csrval_str = colon_ch + 1;
944 	} else /* if (str_colon == NULL) */ {
945 		csraddr_str = (char *)buf; /* Just to shut warning up */
946 		csraddr_len = strnlen(csraddr_str, count);
947 		csrval_str = NULL;
948 	}
949 
950 	/* Convert CSR address to u32 value */
951 	ret = kstrtou32(csraddr_str, 0, &csraddr);
952 	if (ret != 0)
953 		goto free_csraddr_str;
954 
955 	/* Check whether passed register address is valid */
956 	if (csraddr > CSR_MAX || !IS_ALIGNED(csraddr, SZ_4)) {
957 		ret = -EINVAL;
958 		goto free_csraddr_str;
959 	}
960 
961 	/* Shift register address to the right so to have u16 address */
962 	pdev->csr = (csraddr >> 2);
963 
964 	/* Parse new CSR value and send it to IDT, if colon has been found */
965 	if (colon_ch != NULL) {
966 		ret = kstrtou32(csrval_str, 0, &csrval);
967 		if (ret != 0)
968 			goto free_csraddr_str;
969 
970 		ret = idt_csr_write(pdev, pdev->csr, csrval);
971 		if (ret != 0)
972 			goto free_csraddr_str;
973 	}
974 
975 	/* Free memory only if colon has been found */
976 free_csraddr_str:
977 	if (colon_ch != NULL)
978 		kfree(csraddr_str);
979 
980 	/* Free buffer allocated for data retrieved from User-space */
981 free_buf:
982 	kfree(buf);
983 
984 	return (ret != 0 ? ret : count);
985 }
986 
987 /*
988  * idt_dbgfs_csr_read() - CSR debugfs-node read callback
989  * @filep:	Pointer to the file system file descriptor
990  * @buf:	Buffer to write data to
991  * @count:	Size of the buffer
992  * @offp:	Offset within the file
993  *
994  * It just prints the pair "0x<reg addr>:0x<value>" to passed buffer.
995  */
996 #define CSRBUF_SIZE	((size_t)32)
997 static ssize_t idt_dbgfs_csr_read(struct file *filep, char __user *ubuf,
998 				  size_t count, loff_t *offp)
999 {
1000 	struct idt_89hpesx_dev *pdev = filep->private_data;
1001 	u32 csraddr, csrval;
1002 	char buf[CSRBUF_SIZE];
1003 	int ret, size;
1004 
1005 	/* Perform CSR read operation */
1006 	ret = idt_csr_read(pdev, pdev->csr, &csrval);
1007 	if (ret != 0)
1008 		return ret;
1009 
1010 	/* Shift register address to the left so to have real address */
1011 	csraddr = ((u32)pdev->csr << 2);
1012 
1013 	/* Print the "0x<reg addr>:0x<value>" to buffer */
1014 	size = snprintf(buf, CSRBUF_SIZE, "0x%05x:0x%08x\n",
1015 		(unsigned int)csraddr, (unsigned int)csrval);
1016 
1017 	/* Copy data to User-space */
1018 	return simple_read_from_buffer(ubuf, count, offp, buf, size);
1019 }
1020 
1021 /*
1022  * eeprom_attribute - EEPROM sysfs-node attributes
1023  *
1024  * NOTE Size will be changed in compliance with OF node. EEPROM attribute will
1025  * be read-only as well if the corresponding flag is specified in OF node.
1026  */
1027 static BIN_ATTR_RW(eeprom, EEPROM_DEF_SIZE);
1028 
1029 /*
1030  * csr_dbgfs_ops - CSR debugfs-node read/write operations
1031  */
1032 static const struct file_operations csr_dbgfs_ops = {
1033 	.owner = THIS_MODULE,
1034 	.open = simple_open,
1035 	.write = idt_dbgfs_csr_write,
1036 	.read = idt_dbgfs_csr_read
1037 };
1038 
1039 /*===========================================================================
1040  *                       Driver init/deinit methods
1041  *===========================================================================
1042  */
1043 
1044 /*
1045  * idt_set_defval() - disable EEPROM access by default
1046  * @pdev:	Pointer to the driver data
1047  */
1048 static void idt_set_defval(struct idt_89hpesx_dev *pdev)
1049 {
1050 	/* If OF info is missing then use next values */
1051 	pdev->eesize = 0;
1052 	pdev->eero = true;
1053 	pdev->inieecmd = 0;
1054 	pdev->eeaddr = 0;
1055 }
1056 
1057 static const struct i2c_device_id ee_ids[];
1058 
1059 /*
1060  * idt_ee_match_id() - check whether the node belongs to compatible EEPROMs
1061  */
1062 static const struct i2c_device_id *idt_ee_match_id(struct fwnode_handle *fwnode)
1063 {
1064 	const struct i2c_device_id *id = ee_ids;
1065 	const char *compatible, *p;
1066 	char devname[I2C_NAME_SIZE];
1067 	int ret;
1068 
1069 	ret = fwnode_property_read_string(fwnode, "compatible", &compatible);
1070 	if (ret)
1071 		return NULL;
1072 
1073 	p = strchr(compatible, ',');
1074 	strlcpy(devname, p ? p + 1 : compatible, sizeof(devname));
1075 	/* Search through the device name */
1076 	while (id->name[0]) {
1077 		if (strcmp(devname, id->name) == 0)
1078 			return id;
1079 		id++;
1080 	}
1081 	return NULL;
1082 }
1083 
1084 /*
1085  * idt_get_fw_data() - get IDT i2c-device parameters from device tree
1086  * @pdev:	Pointer to the driver data
1087  */
1088 static void idt_get_fw_data(struct idt_89hpesx_dev *pdev)
1089 {
1090 	struct device *dev = &pdev->client->dev;
1091 	struct fwnode_handle *fwnode;
1092 	const struct i2c_device_id *ee_id = NULL;
1093 	u32 eeprom_addr;
1094 	int ret;
1095 
1096 	device_for_each_child_node(dev, fwnode) {
1097 		ee_id = idt_ee_match_id(fwnode);
1098 		if (ee_id)
1099 			break;
1100 
1101 		dev_warn(dev, "Skip unsupported EEPROM device %pfw\n", fwnode);
1102 	}
1103 
1104 	/* If there is no fwnode EEPROM device, then set zero size */
1105 	if (!ee_id) {
1106 		dev_warn(dev, "No fwnode, EEPROM access disabled");
1107 		idt_set_defval(pdev);
1108 		return;
1109 	}
1110 
1111 	/* Retrieve EEPROM size */
1112 	pdev->eesize = (u32)ee_id->driver_data;
1113 
1114 	/* Get custom EEPROM address from 'reg' attribute */
1115 	ret = fwnode_property_read_u32(fwnode, "reg", &eeprom_addr);
1116 	if (ret || (eeprom_addr == 0)) {
1117 		dev_warn(dev, "No EEPROM reg found, use default address 0x%x",
1118 			 EEPROM_DEF_ADDR);
1119 		pdev->inieecmd = 0;
1120 		pdev->eeaddr = EEPROM_DEF_ADDR << 1;
1121 	} else {
1122 		pdev->inieecmd = EEPROM_USA;
1123 		pdev->eeaddr = eeprom_addr << 1;
1124 	}
1125 
1126 	/* Check EEPROM 'read-only' flag */
1127 	if (fwnode_property_read_bool(fwnode, "read-only"))
1128 		pdev->eero = true;
1129 	else /* if (!fwnode_property_read_bool(node, "read-only")) */
1130 		pdev->eero = false;
1131 
1132 	fwnode_handle_put(fwnode);
1133 	dev_info(dev, "EEPROM of %d bytes found by 0x%x",
1134 		pdev->eesize, pdev->eeaddr);
1135 }
1136 
1137 /*
1138  * idt_create_pdev() - create and init data structure of the driver
1139  * @client:	i2c client of IDT PCIe-switch device
1140  */
1141 static struct idt_89hpesx_dev *idt_create_pdev(struct i2c_client *client)
1142 {
1143 	struct idt_89hpesx_dev *pdev;
1144 
1145 	/* Allocate memory for driver data */
1146 	pdev = devm_kmalloc(&client->dev, sizeof(struct idt_89hpesx_dev),
1147 		GFP_KERNEL);
1148 	if (pdev == NULL)
1149 		return ERR_PTR(-ENOMEM);
1150 
1151 	/* Initialize basic fields of the data */
1152 	pdev->client = client;
1153 	i2c_set_clientdata(client, pdev);
1154 
1155 	/* Read firmware nodes information */
1156 	idt_get_fw_data(pdev);
1157 
1158 	/* Initialize basic CSR CMD field - use full DWORD-sized r/w ops */
1159 	pdev->inicsrcmd = CSR_DWE;
1160 	pdev->csr = CSR_DEF;
1161 
1162 	/* Enable Packet Error Checking if it's supported by adapter */
1163 	if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_PEC)) {
1164 		pdev->iniccode = CCODE_PEC;
1165 		client->flags |= I2C_CLIENT_PEC;
1166 	} else /* PEC is unsupported */ {
1167 		pdev->iniccode = 0;
1168 	}
1169 
1170 	return pdev;
1171 }
1172 
1173 /*
1174  * idt_free_pdev() - free data structure of the driver
1175  * @pdev:	Pointer to the driver data
1176  */
1177 static void idt_free_pdev(struct idt_89hpesx_dev *pdev)
1178 {
1179 	/* Clear driver data from device private field */
1180 	i2c_set_clientdata(pdev->client, NULL);
1181 }
1182 
1183 /*
1184  * idt_set_smbus_ops() - set supported SMBus operations
1185  * @pdev:	Pointer to the driver data
1186  * Return status of smbus check operations
1187  */
1188 static int idt_set_smbus_ops(struct idt_89hpesx_dev *pdev)
1189 {
1190 	struct i2c_adapter *adapter = pdev->client->adapter;
1191 	struct device *dev = &pdev->client->dev;
1192 
1193 	/* Check i2c adapter read functionality */
1194 	if (i2c_check_functionality(adapter,
1195 				    I2C_FUNC_SMBUS_READ_BLOCK_DATA)) {
1196 		pdev->smb_read = idt_smb_read_block;
1197 		dev_dbg(dev, "SMBus block-read op chosen");
1198 	} else if (i2c_check_functionality(adapter,
1199 					   I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
1200 		pdev->smb_read = idt_smb_read_i2c_block;
1201 		dev_dbg(dev, "SMBus i2c-block-read op chosen");
1202 	} else if (i2c_check_functionality(adapter,
1203 					   I2C_FUNC_SMBUS_READ_WORD_DATA) &&
1204 		   i2c_check_functionality(adapter,
1205 					   I2C_FUNC_SMBUS_READ_BYTE_DATA)) {
1206 		pdev->smb_read = idt_smb_read_word;
1207 		dev_warn(dev, "Use slow word/byte SMBus read ops");
1208 	} else if (i2c_check_functionality(adapter,
1209 					   I2C_FUNC_SMBUS_READ_BYTE_DATA)) {
1210 		pdev->smb_read = idt_smb_read_byte;
1211 		dev_warn(dev, "Use slow byte SMBus read op");
1212 	} else /* no supported smbus read operations */ {
1213 		dev_err(dev, "No supported SMBus read op");
1214 		return -EPFNOSUPPORT;
1215 	}
1216 
1217 	/* Check i2c adapter write functionality */
1218 	if (i2c_check_functionality(adapter,
1219 				    I2C_FUNC_SMBUS_WRITE_BLOCK_DATA)) {
1220 		pdev->smb_write = idt_smb_write_block;
1221 		dev_dbg(dev, "SMBus block-write op chosen");
1222 	} else if (i2c_check_functionality(adapter,
1223 					   I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)) {
1224 		pdev->smb_write = idt_smb_write_i2c_block;
1225 		dev_dbg(dev, "SMBus i2c-block-write op chosen");
1226 	} else if (i2c_check_functionality(adapter,
1227 					   I2C_FUNC_SMBUS_WRITE_WORD_DATA) &&
1228 		   i2c_check_functionality(adapter,
1229 					   I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) {
1230 		pdev->smb_write = idt_smb_write_word;
1231 		dev_warn(dev, "Use slow word/byte SMBus write op");
1232 	} else if (i2c_check_functionality(adapter,
1233 					   I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) {
1234 		pdev->smb_write = idt_smb_write_byte;
1235 		dev_warn(dev, "Use slow byte SMBus write op");
1236 	} else /* no supported smbus write operations */ {
1237 		dev_err(dev, "No supported SMBus write op");
1238 		return -EPFNOSUPPORT;
1239 	}
1240 
1241 	/* Initialize IDT SMBus slave interface mutex */
1242 	mutex_init(&pdev->smb_mtx);
1243 
1244 	return 0;
1245 }
1246 
1247 /*
1248  * idt_check_dev() - check whether it's really IDT 89HPESx device
1249  * @pdev:	Pointer to the driver data
1250  * Return status of i2c adapter check operation
1251  */
1252 static int idt_check_dev(struct idt_89hpesx_dev *pdev)
1253 {
1254 	struct device *dev = &pdev->client->dev;
1255 	u32 viddid;
1256 	int ret;
1257 
1258 	/* Read VID and DID directly from IDT memory space */
1259 	ret = idt_csr_read(pdev, IDT_VIDDID_CSR, &viddid);
1260 	if (ret != 0) {
1261 		dev_err(dev, "Failed to read VID/DID");
1262 		return ret;
1263 	}
1264 
1265 	/* Check whether it's IDT device */
1266 	if ((viddid & IDT_VID_MASK) != PCI_VENDOR_ID_IDT) {
1267 		dev_err(dev, "Got unsupported VID/DID: 0x%08x", viddid);
1268 		return -ENODEV;
1269 	}
1270 
1271 	dev_info(dev, "Found IDT 89HPES device VID:0x%04x, DID:0x%04x",
1272 		(viddid & IDT_VID_MASK), (viddid >> 16));
1273 
1274 	return 0;
1275 }
1276 
1277 /*
1278  * idt_create_sysfs_files() - create sysfs attribute files
1279  * @pdev:	Pointer to the driver data
1280  * Return status of operation
1281  */
1282 static int idt_create_sysfs_files(struct idt_89hpesx_dev *pdev)
1283 {
1284 	struct device *dev = &pdev->client->dev;
1285 	int ret;
1286 
1287 	/* Don't do anything if EEPROM isn't accessible */
1288 	if (pdev->eesize == 0) {
1289 		dev_dbg(dev, "Skip creating sysfs-files");
1290 		return 0;
1291 	}
1292 
1293 	/* Allocate memory for attribute file */
1294 	pdev->ee_file = devm_kmalloc(dev, sizeof(*pdev->ee_file), GFP_KERNEL);
1295 	if (!pdev->ee_file)
1296 		return -ENOMEM;
1297 
1298 	/* Copy the declared EEPROM attr structure to change some of fields */
1299 	memcpy(pdev->ee_file, &bin_attr_eeprom, sizeof(*pdev->ee_file));
1300 
1301 	/* In case of read-only EEPROM get rid of write ability */
1302 	if (pdev->eero) {
1303 		pdev->ee_file->attr.mode &= ~0200;
1304 		pdev->ee_file->write = NULL;
1305 	}
1306 	/* Create EEPROM sysfs file */
1307 	pdev->ee_file->size = pdev->eesize;
1308 	ret = sysfs_create_bin_file(&dev->kobj, pdev->ee_file);
1309 	if (ret != 0) {
1310 		dev_err(dev, "Failed to create EEPROM sysfs-node");
1311 		return ret;
1312 	}
1313 
1314 	return 0;
1315 }
1316 
1317 /*
1318  * idt_remove_sysfs_files() - remove sysfs attribute files
1319  * @pdev:	Pointer to the driver data
1320  */
1321 static void idt_remove_sysfs_files(struct idt_89hpesx_dev *pdev)
1322 {
1323 	struct device *dev = &pdev->client->dev;
1324 
1325 	/* Don't do anything if EEPROM wasn't accessible */
1326 	if (pdev->eesize == 0)
1327 		return;
1328 
1329 	/* Remove EEPROM sysfs file */
1330 	sysfs_remove_bin_file(&dev->kobj, pdev->ee_file);
1331 }
1332 
1333 /*
1334  * idt_create_dbgfs_files() - create debugfs files
1335  * @pdev:	Pointer to the driver data
1336  */
1337 #define CSRNAME_LEN	((size_t)32)
1338 static void idt_create_dbgfs_files(struct idt_89hpesx_dev *pdev)
1339 {
1340 	struct i2c_client *cli = pdev->client;
1341 	char fname[CSRNAME_LEN];
1342 
1343 	/* Create Debugfs directory for CSR file */
1344 	snprintf(fname, CSRNAME_LEN, "%d-%04hx", cli->adapter->nr, cli->addr);
1345 	pdev->csr_dir = debugfs_create_dir(fname, csr_dbgdir);
1346 
1347 	/* Create Debugfs file for CSR read/write operations */
1348 	debugfs_create_file(cli->name, 0600, pdev->csr_dir, pdev,
1349 			    &csr_dbgfs_ops);
1350 }
1351 
1352 /*
1353  * idt_remove_dbgfs_files() - remove debugfs files
1354  * @pdev:	Pointer to the driver data
1355  */
1356 static void idt_remove_dbgfs_files(struct idt_89hpesx_dev *pdev)
1357 {
1358 	/* Remove CSR directory and it sysfs-node */
1359 	debugfs_remove_recursive(pdev->csr_dir);
1360 }
1361 
1362 /*
1363  * idt_probe() - IDT 89HPESx driver probe() callback method
1364  */
1365 static int idt_probe(struct i2c_client *client, const struct i2c_device_id *id)
1366 {
1367 	struct idt_89hpesx_dev *pdev;
1368 	int ret;
1369 
1370 	/* Create driver data */
1371 	pdev = idt_create_pdev(client);
1372 	if (IS_ERR(pdev))
1373 		return PTR_ERR(pdev);
1374 
1375 	/* Set SMBus operations */
1376 	ret = idt_set_smbus_ops(pdev);
1377 	if (ret != 0)
1378 		goto err_free_pdev;
1379 
1380 	/* Check whether it is truly IDT 89HPESx device */
1381 	ret = idt_check_dev(pdev);
1382 	if (ret != 0)
1383 		goto err_free_pdev;
1384 
1385 	/* Create sysfs files */
1386 	ret = idt_create_sysfs_files(pdev);
1387 	if (ret != 0)
1388 		goto err_free_pdev;
1389 
1390 	/* Create debugfs files */
1391 	idt_create_dbgfs_files(pdev);
1392 
1393 	return 0;
1394 
1395 err_free_pdev:
1396 	idt_free_pdev(pdev);
1397 
1398 	return ret;
1399 }
1400 
1401 /*
1402  * idt_remove() - IDT 89HPESx driver remove() callback method
1403  */
1404 static int idt_remove(struct i2c_client *client)
1405 {
1406 	struct idt_89hpesx_dev *pdev = i2c_get_clientdata(client);
1407 
1408 	/* Remove debugfs files first */
1409 	idt_remove_dbgfs_files(pdev);
1410 
1411 	/* Remove sysfs files */
1412 	idt_remove_sysfs_files(pdev);
1413 
1414 	/* Discard driver data structure */
1415 	idt_free_pdev(pdev);
1416 
1417 	return 0;
1418 }
1419 
1420 /*
1421  * ee_ids - array of supported EEPROMs
1422  */
1423 static const struct i2c_device_id ee_ids[] = {
1424 	{ "24c32",  4096},
1425 	{ "24c64",  8192},
1426 	{ "24c128", 16384},
1427 	{ "24c256", 32768},
1428 	{ "24c512", 65536},
1429 	{}
1430 };
1431 MODULE_DEVICE_TABLE(i2c, ee_ids);
1432 
1433 /*
1434  * idt_ids - supported IDT 89HPESx devices
1435  */
1436 static const struct i2c_device_id idt_ids[] = {
1437 	{ "89hpes8nt2", 0 },
1438 	{ "89hpes12nt3", 0 },
1439 
1440 	{ "89hpes24nt6ag2", 0 },
1441 	{ "89hpes32nt8ag2", 0 },
1442 	{ "89hpes32nt8bg2", 0 },
1443 	{ "89hpes12nt12g2", 0 },
1444 	{ "89hpes16nt16g2", 0 },
1445 	{ "89hpes24nt24g2", 0 },
1446 	{ "89hpes32nt24ag2", 0 },
1447 	{ "89hpes32nt24bg2", 0 },
1448 
1449 	{ "89hpes12n3", 0 },
1450 	{ "89hpes12n3a", 0 },
1451 	{ "89hpes24n3", 0 },
1452 	{ "89hpes24n3a", 0 },
1453 
1454 	{ "89hpes32h8", 0 },
1455 	{ "89hpes32h8g2", 0 },
1456 	{ "89hpes48h12", 0 },
1457 	{ "89hpes48h12g2", 0 },
1458 	{ "89hpes48h12ag2", 0 },
1459 	{ "89hpes16h16", 0 },
1460 	{ "89hpes22h16", 0 },
1461 	{ "89hpes22h16g2", 0 },
1462 	{ "89hpes34h16", 0 },
1463 	{ "89hpes34h16g2", 0 },
1464 	{ "89hpes64h16", 0 },
1465 	{ "89hpes64h16g2", 0 },
1466 	{ "89hpes64h16ag2", 0 },
1467 
1468 	/* { "89hpes3t3", 0 }, // No SMBus-slave iface */
1469 	{ "89hpes12t3g2", 0 },
1470 	{ "89hpes24t3g2", 0 },
1471 	/* { "89hpes4t4", 0 }, // No SMBus-slave iface */
1472 	{ "89hpes16t4", 0 },
1473 	{ "89hpes4t4g2", 0 },
1474 	{ "89hpes10t4g2", 0 },
1475 	{ "89hpes16t4g2", 0 },
1476 	{ "89hpes16t4ag2", 0 },
1477 	{ "89hpes5t5", 0 },
1478 	{ "89hpes6t5", 0 },
1479 	{ "89hpes8t5", 0 },
1480 	{ "89hpes8t5a", 0 },
1481 	{ "89hpes24t6", 0 },
1482 	{ "89hpes6t6g2", 0 },
1483 	{ "89hpes24t6g2", 0 },
1484 	{ "89hpes16t7", 0 },
1485 	{ "89hpes32t8", 0 },
1486 	{ "89hpes32t8g2", 0 },
1487 	{ "89hpes48t12", 0 },
1488 	{ "89hpes48t12g2", 0 },
1489 	{ /* END OF LIST */ }
1490 };
1491 MODULE_DEVICE_TABLE(i2c, idt_ids);
1492 
1493 static const struct of_device_id idt_of_match[] = {
1494 	{ .compatible = "idt,89hpes8nt2", },
1495 	{ .compatible = "idt,89hpes12nt3", },
1496 
1497 	{ .compatible = "idt,89hpes24nt6ag2", },
1498 	{ .compatible = "idt,89hpes32nt8ag2", },
1499 	{ .compatible = "idt,89hpes32nt8bg2", },
1500 	{ .compatible = "idt,89hpes12nt12g2", },
1501 	{ .compatible = "idt,89hpes16nt16g2", },
1502 	{ .compatible = "idt,89hpes24nt24g2", },
1503 	{ .compatible = "idt,89hpes32nt24ag2", },
1504 	{ .compatible = "idt,89hpes32nt24bg2", },
1505 
1506 	{ .compatible = "idt,89hpes12n3", },
1507 	{ .compatible = "idt,89hpes12n3a", },
1508 	{ .compatible = "idt,89hpes24n3", },
1509 	{ .compatible = "idt,89hpes24n3a", },
1510 
1511 	{ .compatible = "idt,89hpes32h8", },
1512 	{ .compatible = "idt,89hpes32h8g2", },
1513 	{ .compatible = "idt,89hpes48h12", },
1514 	{ .compatible = "idt,89hpes48h12g2", },
1515 	{ .compatible = "idt,89hpes48h12ag2", },
1516 	{ .compatible = "idt,89hpes16h16", },
1517 	{ .compatible = "idt,89hpes22h16", },
1518 	{ .compatible = "idt,89hpes22h16g2", },
1519 	{ .compatible = "idt,89hpes34h16", },
1520 	{ .compatible = "idt,89hpes34h16g2", },
1521 	{ .compatible = "idt,89hpes64h16", },
1522 	{ .compatible = "idt,89hpes64h16g2", },
1523 	{ .compatible = "idt,89hpes64h16ag2", },
1524 
1525 	{ .compatible = "idt,89hpes12t3g2", },
1526 	{ .compatible = "idt,89hpes24t3g2", },
1527 
1528 	{ .compatible = "idt,89hpes16t4", },
1529 	{ .compatible = "idt,89hpes4t4g2", },
1530 	{ .compatible = "idt,89hpes10t4g2", },
1531 	{ .compatible = "idt,89hpes16t4g2", },
1532 	{ .compatible = "idt,89hpes16t4ag2", },
1533 	{ .compatible = "idt,89hpes5t5", },
1534 	{ .compatible = "idt,89hpes6t5", },
1535 	{ .compatible = "idt,89hpes8t5", },
1536 	{ .compatible = "idt,89hpes8t5a", },
1537 	{ .compatible = "idt,89hpes24t6", },
1538 	{ .compatible = "idt,89hpes6t6g2", },
1539 	{ .compatible = "idt,89hpes24t6g2", },
1540 	{ .compatible = "idt,89hpes16t7", },
1541 	{ .compatible = "idt,89hpes32t8", },
1542 	{ .compatible = "idt,89hpes32t8g2", },
1543 	{ .compatible = "idt,89hpes48t12", },
1544 	{ .compatible = "idt,89hpes48t12g2", },
1545 	{ },
1546 };
1547 MODULE_DEVICE_TABLE(of, idt_of_match);
1548 
1549 /*
1550  * idt_driver - IDT 89HPESx driver structure
1551  */
1552 static struct i2c_driver idt_driver = {
1553 	.driver = {
1554 		.name = IDT_NAME,
1555 		.of_match_table = idt_of_match,
1556 	},
1557 	.probe = idt_probe,
1558 	.remove = idt_remove,
1559 	.id_table = idt_ids,
1560 };
1561 
1562 /*
1563  * idt_init() - IDT 89HPESx driver init() callback method
1564  */
1565 static int __init idt_init(void)
1566 {
1567 	/* Create Debugfs directory first */
1568 	if (debugfs_initialized())
1569 		csr_dbgdir = debugfs_create_dir("idt_csr", NULL);
1570 
1571 	/* Add new i2c-device driver */
1572 	return i2c_add_driver(&idt_driver);
1573 }
1574 module_init(idt_init);
1575 
1576 /*
1577  * idt_exit() - IDT 89HPESx driver exit() callback method
1578  */
1579 static void __exit idt_exit(void)
1580 {
1581 	/* Discard debugfs directory and all files if any */
1582 	debugfs_remove_recursive(csr_dbgdir);
1583 
1584 	/* Unregister i2c-device driver */
1585 	i2c_del_driver(&idt_driver);
1586 }
1587 module_exit(idt_exit);
1588