1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * apds9802als.c - apds9802 ALS Driver 4 * 5 * Copyright (C) 2009 Intel Corp 6 * 7 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 8 * 9 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 10 */ 11 12 #include <linux/module.h> 13 #include <linux/slab.h> 14 #include <linux/i2c.h> 15 #include <linux/err.h> 16 #include <linux/delay.h> 17 #include <linux/mutex.h> 18 #include <linux/sysfs.h> 19 #include <linux/pm_runtime.h> 20 21 #define ALS_MIN_RANGE_VAL 1 22 #define ALS_MAX_RANGE_VAL 2 23 #define POWER_STA_ENABLE 1 24 #define POWER_STA_DISABLE 0 25 26 #define DRIVER_NAME "apds9802als" 27 28 struct als_data { 29 struct mutex mutex; 30 }; 31 32 static ssize_t als_sensing_range_show(struct device *dev, 33 struct device_attribute *attr, char *buf) 34 { 35 struct i2c_client *client = to_i2c_client(dev); 36 int val; 37 38 val = i2c_smbus_read_byte_data(client, 0x81); 39 if (val < 0) 40 return val; 41 if (val & 1) 42 return sprintf(buf, "4095\n"); 43 else 44 return sprintf(buf, "65535\n"); 45 } 46 47 static int als_wait_for_data_ready(struct device *dev) 48 { 49 struct i2c_client *client = to_i2c_client(dev); 50 int ret; 51 int retry = 10; 52 53 do { 54 msleep(30); 55 ret = i2c_smbus_read_byte_data(client, 0x86); 56 } while (!(ret & 0x80) && retry--); 57 58 if (retry < 0) { 59 dev_warn(dev, "timeout waiting for data ready\n"); 60 return -ETIMEDOUT; 61 } 62 63 return 0; 64 } 65 66 static ssize_t als_lux0_input_data_show(struct device *dev, 67 struct device_attribute *attr, char *buf) 68 { 69 struct i2c_client *client = to_i2c_client(dev); 70 struct als_data *data = i2c_get_clientdata(client); 71 int ret_val; 72 int temp; 73 74 /* Protect against parallel reads */ 75 pm_runtime_get_sync(dev); 76 mutex_lock(&data->mutex); 77 78 /* clear EOC interrupt status */ 79 i2c_smbus_write_byte(client, 0x40); 80 /* start measurement */ 81 temp = i2c_smbus_read_byte_data(client, 0x81); 82 i2c_smbus_write_byte_data(client, 0x81, temp | 0x08); 83 84 ret_val = als_wait_for_data_ready(dev); 85 if (ret_val < 0) 86 goto failed; 87 88 temp = i2c_smbus_read_byte_data(client, 0x8C); /* LSB data */ 89 if (temp < 0) { 90 ret_val = temp; 91 goto failed; 92 } 93 ret_val = i2c_smbus_read_byte_data(client, 0x8D); /* MSB data */ 94 if (ret_val < 0) 95 goto failed; 96 97 mutex_unlock(&data->mutex); 98 pm_runtime_put_sync(dev); 99 100 temp = (ret_val << 8) | temp; 101 return sprintf(buf, "%d\n", temp); 102 failed: 103 mutex_unlock(&data->mutex); 104 pm_runtime_put_sync(dev); 105 return ret_val; 106 } 107 108 static ssize_t als_sensing_range_store(struct device *dev, 109 struct device_attribute *attr, const char *buf, size_t count) 110 { 111 struct i2c_client *client = to_i2c_client(dev); 112 struct als_data *data = i2c_get_clientdata(client); 113 int ret_val; 114 unsigned long val; 115 116 ret_val = kstrtoul(buf, 10, &val); 117 if (ret_val) 118 return ret_val; 119 120 if (val < 4096) 121 val = 1; 122 else if (val < 65536) 123 val = 2; 124 else 125 return -ERANGE; 126 127 pm_runtime_get_sync(dev); 128 129 /* Make sure nobody else reads/modifies/writes 0x81 while we 130 are active */ 131 mutex_lock(&data->mutex); 132 133 ret_val = i2c_smbus_read_byte_data(client, 0x81); 134 if (ret_val < 0) 135 goto fail; 136 137 /* Reset the bits before setting them */ 138 ret_val = ret_val & 0xFA; 139 140 if (val == 1) /* Setting detection range up to 4k LUX */ 141 ret_val = (ret_val | 0x01); 142 else /* Setting detection range up to 64k LUX*/ 143 ret_val = (ret_val | 0x00); 144 145 ret_val = i2c_smbus_write_byte_data(client, 0x81, ret_val); 146 147 if (ret_val >= 0) { 148 /* All OK */ 149 mutex_unlock(&data->mutex); 150 pm_runtime_put_sync(dev); 151 return count; 152 } 153 fail: 154 mutex_unlock(&data->mutex); 155 pm_runtime_put_sync(dev); 156 return ret_val; 157 } 158 159 static int als_set_power_state(struct i2c_client *client, bool on_off) 160 { 161 int ret_val; 162 struct als_data *data = i2c_get_clientdata(client); 163 164 mutex_lock(&data->mutex); 165 ret_val = i2c_smbus_read_byte_data(client, 0x80); 166 if (ret_val < 0) 167 goto fail; 168 if (on_off) 169 ret_val = ret_val | 0x01; 170 else 171 ret_val = ret_val & 0xFE; 172 ret_val = i2c_smbus_write_byte_data(client, 0x80, ret_val); 173 fail: 174 mutex_unlock(&data->mutex); 175 return ret_val; 176 } 177 178 static DEVICE_ATTR(lux0_sensor_range, S_IRUGO | S_IWUSR, 179 als_sensing_range_show, als_sensing_range_store); 180 static DEVICE_ATTR(lux0_input, S_IRUGO, als_lux0_input_data_show, NULL); 181 182 static struct attribute *mid_att_als[] = { 183 &dev_attr_lux0_sensor_range.attr, 184 &dev_attr_lux0_input.attr, 185 NULL 186 }; 187 188 static const struct attribute_group m_als_gr = { 189 .name = "apds9802als", 190 .attrs = mid_att_als 191 }; 192 193 static int als_set_default_config(struct i2c_client *client) 194 { 195 int ret_val; 196 /* Write the command and then switch on */ 197 ret_val = i2c_smbus_write_byte_data(client, 0x80, 0x01); 198 if (ret_val < 0) { 199 dev_err(&client->dev, "failed default switch on write\n"); 200 return ret_val; 201 } 202 /* detection range: 1~64K Lux, maunal measurement */ 203 ret_val = i2c_smbus_write_byte_data(client, 0x81, 0x08); 204 if (ret_val < 0) 205 dev_err(&client->dev, "failed default LUX on write\n"); 206 207 /* We always get 0 for the 1st measurement after system power on, 208 * so make sure it is finished before user asks for data. 209 */ 210 als_wait_for_data_ready(&client->dev); 211 212 return ret_val; 213 } 214 215 static int apds9802als_probe(struct i2c_client *client, 216 const struct i2c_device_id *id) 217 { 218 int res; 219 struct als_data *data; 220 221 data = kzalloc(sizeof(struct als_data), GFP_KERNEL); 222 if (data == NULL) { 223 dev_err(&client->dev, "Memory allocation failed\n"); 224 return -ENOMEM; 225 } 226 i2c_set_clientdata(client, data); 227 res = sysfs_create_group(&client->dev.kobj, &m_als_gr); 228 if (res) { 229 dev_err(&client->dev, "device create file failed\n"); 230 goto als_error1; 231 } 232 dev_info(&client->dev, "ALS chip found\n"); 233 als_set_default_config(client); 234 mutex_init(&data->mutex); 235 236 pm_runtime_set_active(&client->dev); 237 pm_runtime_enable(&client->dev); 238 239 return res; 240 als_error1: 241 kfree(data); 242 return res; 243 } 244 245 static void apds9802als_remove(struct i2c_client *client) 246 { 247 struct als_data *data = i2c_get_clientdata(client); 248 249 pm_runtime_get_sync(&client->dev); 250 251 als_set_power_state(client, false); 252 sysfs_remove_group(&client->dev.kobj, &m_als_gr); 253 254 pm_runtime_disable(&client->dev); 255 pm_runtime_set_suspended(&client->dev); 256 pm_runtime_put_noidle(&client->dev); 257 258 kfree(data); 259 } 260 261 #ifdef CONFIG_PM 262 263 static int apds9802als_suspend(struct device *dev) 264 { 265 struct i2c_client *client = to_i2c_client(dev); 266 267 als_set_power_state(client, false); 268 return 0; 269 } 270 271 static int apds9802als_resume(struct device *dev) 272 { 273 struct i2c_client *client = to_i2c_client(dev); 274 275 als_set_power_state(client, true); 276 return 0; 277 } 278 279 static UNIVERSAL_DEV_PM_OPS(apds9802als_pm_ops, apds9802als_suspend, 280 apds9802als_resume, NULL); 281 282 #define APDS9802ALS_PM_OPS (&apds9802als_pm_ops) 283 284 #else /* CONFIG_PM */ 285 #define APDS9802ALS_PM_OPS NULL 286 #endif /* CONFIG_PM */ 287 288 static const struct i2c_device_id apds9802als_id[] = { 289 { DRIVER_NAME, 0 }, 290 { } 291 }; 292 293 MODULE_DEVICE_TABLE(i2c, apds9802als_id); 294 295 static struct i2c_driver apds9802als_driver = { 296 .driver = { 297 .name = DRIVER_NAME, 298 .pm = APDS9802ALS_PM_OPS, 299 }, 300 .probe = apds9802als_probe, 301 .remove = apds9802als_remove, 302 .id_table = apds9802als_id, 303 }; 304 305 module_i2c_driver(apds9802als_driver); 306 307 MODULE_AUTHOR("Anantha Narayanan <Anantha.Narayanan@intel.com"); 308 MODULE_DESCRIPTION("Avago apds9802als ALS Driver"); 309 MODULE_LICENSE("GPL v2"); 310