1# 2# Misc strange devices 3# 4 5menu "Misc devices" 6 7config SENSORS_LIS3LV02D 8 tristate 9 depends on INPUT 10 select INPUT_POLLDEV 11 default n 12 13config AD525X_DPOT 14 tristate "Analog Devices Digital Potentiometers" 15 depends on (I2C || SPI) && SYSFS 16 help 17 If you say yes here, you get support for the Analog Devices 18 AD5258, AD5259, AD5251, AD5252, AD5253, AD5254, AD5255 19 AD5160, AD5161, AD5162, AD5165, AD5200, AD5201, AD5203, 20 AD5204, AD5206, AD5207, AD5231, AD5232, AD5233, AD5235, 21 AD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293, 22 AD7376, AD8400, AD8402, AD8403, ADN2850, AD5241, AD5242, 23 AD5243, AD5245, AD5246, AD5247, AD5248, AD5280, AD5282, 24 ADN2860, AD5273, AD5171, AD5170, AD5172, AD5173, AD5270, 25 AD5271, AD5272, AD5274 26 digital potentiometer chips. 27 28 See Documentation/misc-devices/ad525x_dpot.txt for the 29 userspace interface. 30 31 This driver can also be built as a module. If so, the module 32 will be called ad525x_dpot. 33 34config AD525X_DPOT_I2C 35 tristate "support I2C bus connection" 36 depends on AD525X_DPOT && I2C 37 help 38 Say Y here if you have a digital potentiometers hooked to an I2C bus. 39 40 To compile this driver as a module, choose M here: the 41 module will be called ad525x_dpot-i2c. 42 43config AD525X_DPOT_SPI 44 tristate "support SPI bus connection" 45 depends on AD525X_DPOT && SPI_MASTER 46 help 47 Say Y here if you have a digital potentiometers hooked to an SPI bus. 48 49 If unsure, say N (but it's safe to say "Y"). 50 51 To compile this driver as a module, choose M here: the 52 module will be called ad525x_dpot-spi. 53 54config ATMEL_PWM 55 tristate "Atmel AT32/AT91 PWM support" 56 depends on HAVE_CLK 57 help 58 This option enables device driver support for the PWM channels 59 on certain Atmel processors. Pulse Width Modulation is used for 60 purposes including software controlled power-efficient backlights 61 on LCD displays, motor control, and waveform generation. 62 63config ATMEL_TCLIB 64 bool "Atmel AT32/AT91 Timer/Counter Library" 65 depends on (AVR32 || ARCH_AT91) 66 help 67 Select this if you want a library to allocate the Timer/Counter 68 blocks found on many Atmel processors. This facilitates using 69 these blocks by different drivers despite processor differences. 70 71config ATMEL_TCB_CLKSRC 72 bool "TC Block Clocksource" 73 depends on ATMEL_TCLIB 74 default y 75 help 76 Select this to get a high precision clocksource based on a 77 TC block with a 5+ MHz base clock rate. Two timer channels 78 are combined to make a single 32-bit timer. 79 80 When GENERIC_CLOCKEVENTS is defined, the third timer channel 81 may be used as a clock event device supporting oneshot mode 82 (delays of up to two seconds) based on the 32 KiHz clock. 83 84config ATMEL_TCB_CLKSRC_BLOCK 85 int 86 depends on ATMEL_TCB_CLKSRC 87 prompt "TC Block" if ARCH_AT91RM9200 || ARCH_AT91SAM9260 || CPU_AT32AP700X 88 default 0 89 range 0 1 90 help 91 Some chips provide more than one TC block, so you have the 92 choice of which one to use for the clock framework. The other 93 TC can be used for other purposes, such as PWM generation and 94 interval timing. 95 96config IBM_ASM 97 tristate "Device driver for IBM RSA service processor" 98 depends on X86 && PCI && INPUT 99 ---help--- 100 This option enables device driver support for in-band access to the 101 IBM RSA (Condor) service processor in eServer xSeries systems. 102 The ibmasm device driver allows user space application to access 103 ASM (Advanced Systems Management) functions on the service 104 processor. The driver is meant to be used in conjunction with 105 a user space API. 106 The ibmasm driver also enables the OS to use the UART on the 107 service processor board as a regular serial port. To make use of 108 this feature serial driver support (CONFIG_SERIAL_8250) must be 109 enabled. 110 111 WARNING: This software may not be supported or function 112 correctly on your IBM server. Please consult the IBM ServerProven 113 website <http://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/> 114 for information on the specific driver level and support statement 115 for your IBM server. 116 117config PHANTOM 118 tristate "Sensable PHANToM (PCI)" 119 depends on PCI 120 help 121 Say Y here if you want to build a driver for Sensable PHANToM device. 122 123 This driver is only for PCI PHANToMs. 124 125 If you choose to build module, its name will be phantom. If unsure, 126 say N here. 127 128config INTEL_MID_PTI 129 tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard" 130 depends on PCI 131 default n 132 help 133 The PTI (Parallel Trace Interface) driver directs 134 trace data routed from various parts in the system out 135 through an Intel Penwell PTI port and out of the mobile 136 device for analysis with a debugging tool (Lauterbach or Fido). 137 138 You should select this driver if the target kernel is meant for 139 an Intel Atom (non-netbook) mobile device containing a MIPI 140 P1149.7 standard implementation. 141 142config SGI_IOC4 143 tristate "SGI IOC4 Base IO support" 144 depends on PCI 145 ---help--- 146 This option enables basic support for the IOC4 chip on certain 147 SGI IO controller cards (IO9, IO10, and PCI-RT). This option 148 does not enable any specific functions on such a card, but provides 149 necessary infrastructure for other drivers to utilize. 150 151 If you have an SGI Altix with an IOC4-based card say Y. 152 Otherwise say N. 153 154config TIFM_CORE 155 tristate "TI Flash Media interface support" 156 depends on PCI 157 help 158 If you want support for Texas Instruments(R) Flash Media adapters 159 you should select this option and then also choose an appropriate 160 host adapter, such as 'TI Flash Media PCI74xx/PCI76xx host adapter 161 support', if you have a TI PCI74xx compatible card reader, for 162 example. 163 You will also have to select some flash card format drivers. MMC/SD 164 cards are supported via 'MMC/SD Card support: TI Flash Media MMC/SD 165 Interface support (MMC_TIFM_SD)'. 166 167 To compile this driver as a module, choose M here: the module will 168 be called tifm_core. 169 170config TIFM_7XX1 171 tristate "TI Flash Media PCI74xx/PCI76xx host adapter support" 172 depends on PCI && TIFM_CORE 173 default TIFM_CORE 174 help 175 This option enables support for Texas Instruments(R) PCI74xx and 176 PCI76xx families of Flash Media adapters, found in many laptops. 177 To make actual use of the device, you will have to select some 178 flash card format drivers, as outlined in the TIFM_CORE Help. 179 180 To compile this driver as a module, choose M here: the module will 181 be called tifm_7xx1. 182 183config ICS932S401 184 tristate "Integrated Circuits ICS932S401" 185 depends on I2C 186 help 187 If you say yes here you get support for the Integrated Circuits 188 ICS932S401 clock control chips. 189 190 This driver can also be built as a module. If so, the module 191 will be called ics932s401. 192 193config ATMEL_SSC 194 tristate "Device driver for Atmel SSC peripheral" 195 depends on AVR32 || ARCH_AT91 196 ---help--- 197 This option enables device driver support for Atmel Synchronized 198 Serial Communication peripheral (SSC). 199 200 The SSC peripheral supports a wide variety of serial frame based 201 communications, i.e. I2S, SPI, etc. 202 203 If unsure, say N. 204 205config ENCLOSURE_SERVICES 206 tristate "Enclosure Services" 207 default n 208 help 209 Provides support for intelligent enclosures (bays which 210 contain storage devices). You also need either a host 211 driver (SCSI/ATA) which supports enclosures 212 or a SCSI enclosure device (SES) to use these services. 213 214config SGI_XP 215 tristate "Support communication between SGI SSIs" 216 depends on NET 217 depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_UV) && SMP 218 select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 219 select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 220 select SGI_GRU if X86_64 && SMP 221 ---help--- 222 An SGI machine can be divided into multiple Single System 223 Images which act independently of each other and have 224 hardware based memory protection from the others. Enabling 225 this feature will allow for direct communication between SSIs 226 based on a network adapter and DMA messaging. 227 228config CS5535_MFGPT 229 tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support" 230 depends on PCI && X86 && MFD_CS5535 231 default n 232 help 233 This driver provides access to MFGPT functionality for other 234 drivers that need timers. MFGPTs are available in the CS5535 and 235 CS5536 companion chips that are found in AMD Geode and several 236 other platforms. They have a better resolution and max interval 237 than the generic PIT, and are suitable for use as high-res timers. 238 You probably don't want to enable this manually; other drivers that 239 make use of it should enable it. 240 241config CS5535_MFGPT_DEFAULT_IRQ 242 int 243 depends on CS5535_MFGPT 244 default 7 245 help 246 MFGPTs on the CS5535 require an interrupt. The selected IRQ 247 can be overridden as a module option as well as by driver that 248 use the cs5535_mfgpt_ API; however, different architectures might 249 want to use a different IRQ by default. This is here for 250 architectures to set as necessary. 251 252config CS5535_CLOCK_EVENT_SRC 253 tristate "CS5535/CS5536 high-res timer (MFGPT) events" 254 depends on GENERIC_CLOCKEVENTS && CS5535_MFGPT 255 help 256 This driver provides a clock event source based on the MFGPT 257 timer(s) in the CS5535 and CS5536 companion chips. 258 MFGPTs have a better resolution and max interval than the 259 generic PIT, and are suitable for use as high-res timers. 260 261config HP_ILO 262 tristate "Channel interface driver for the HP iLO processor" 263 depends on PCI 264 default n 265 help 266 The channel interface driver allows applications to communicate 267 with iLO management processors present on HP ProLiant servers. 268 Upon loading, the driver creates /dev/hpilo/dXccbN files, which 269 can be used to gather data from the management processor, via 270 read and write system calls. 271 272 To compile this driver as a module, choose M here: the 273 module will be called hpilo. 274 275config SGI_GRU 276 tristate "SGI GRU driver" 277 depends on X86_UV && SMP 278 default n 279 select MMU_NOTIFIER 280 ---help--- 281 The GRU is a hardware resource located in the system chipset. The GRU 282 contains memory that can be mmapped into the user address space. This memory is 283 used to communicate with the GRU to perform functions such as load/store, 284 scatter/gather, bcopy, AMOs, etc. The GRU is directly accessed by user 285 instructions using user virtual addresses. GRU instructions (ex., bcopy) use 286 user virtual addresses for operands. 287 288 If you are not running on a SGI UV system, say N. 289 290config SGI_GRU_DEBUG 291 bool "SGI GRU driver debug" 292 depends on SGI_GRU 293 default n 294 ---help--- 295 This option enables addition debugging code for the SGI GRU driver. If 296 you are unsure, say N. 297 298config APDS9802ALS 299 tristate "Medfield Avago APDS9802 ALS Sensor module" 300 depends on I2C 301 help 302 If you say yes here you get support for the ALS APDS9802 ambient 303 light sensor. 304 305 This driver can also be built as a module. If so, the module 306 will be called apds9802als. 307 308config ISL29003 309 tristate "Intersil ISL29003 ambient light sensor" 310 depends on I2C && SYSFS 311 help 312 If you say yes here you get support for the Intersil ISL29003 313 ambient light sensor. 314 315 This driver can also be built as a module. If so, the module 316 will be called isl29003. 317 318config ISL29020 319 tristate "Intersil ISL29020 ambient light sensor" 320 depends on I2C 321 help 322 If you say yes here you get support for the Intersil ISL29020 323 ambient light sensor. 324 325 This driver can also be built as a module. If so, the module 326 will be called isl29020. 327 328config SENSORS_TSL2550 329 tristate "Taos TSL2550 ambient light sensor" 330 depends on I2C && SYSFS 331 help 332 If you say yes here you get support for the Taos TSL2550 333 ambient light sensor. 334 335 This driver can also be built as a module. If so, the module 336 will be called tsl2550. 337 338config SENSORS_BH1780 339 tristate "ROHM BH1780GLI ambient light sensor" 340 depends on I2C && SYSFS 341 help 342 If you say yes here you get support for the ROHM BH1780GLI 343 ambient light sensor. 344 345 This driver can also be built as a module. If so, the module 346 will be called bh1780gli. 347 348config SENSORS_BH1770 349 tristate "BH1770GLC / SFH7770 combined ALS - Proximity sensor" 350 depends on I2C 351 ---help--- 352 Say Y here if you want to build a driver for BH1770GLC (ROHM) or 353 SFH7770 (Osram) combined ambient light and proximity sensor chip. 354 355 To compile this driver as a module, choose M here: the 356 module will be called bh1770glc. If unsure, say N here. 357 358config SENSORS_APDS990X 359 tristate "APDS990X combined als and proximity sensors" 360 depends on I2C 361 default n 362 ---help--- 363 Say Y here if you want to build a driver for Avago APDS990x 364 combined ambient light and proximity sensor chip. 365 366 To compile this driver as a module, choose M here: the 367 module will be called apds990x. If unsure, say N here. 368 369config HMC6352 370 tristate "Honeywell HMC6352 compass" 371 depends on I2C 372 help 373 This driver provides support for the Honeywell HMC6352 compass, 374 providing configuration and heading data via sysfs. 375 376config EP93XX_PWM 377 tristate "EP93xx PWM support" 378 depends on ARCH_EP93XX 379 help 380 This option enables device driver support for the PWM channels 381 on the Cirrus EP93xx processors. The EP9307 chip only has one 382 PWM channel all the others have two, the second channel is an 383 alternate function of the EGPIO14 pin. A sysfs interface is 384 provided to control the PWM channels. 385 386 To compile this driver as a module, choose M here: the module will 387 be called ep93xx_pwm. 388 389config DS1682 390 tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm" 391 depends on I2C 392 help 393 If you say yes here you get support for Dallas Semiconductor 394 DS1682 Total Elapsed Time Recorder. 395 396 This driver can also be built as a module. If so, the module 397 will be called ds1682. 398 399config SPEAR13XX_PCIE_GADGET 400 bool "PCIe gadget support for SPEAr13XX platform" 401 depends on ARCH_SPEAR13XX 402 default n 403 help 404 This option enables gadget support for PCIe controller. If 405 board file defines any controller as PCIe endpoint then a sysfs 406 entry will be created for that controller. User can use these 407 sysfs node to configure PCIe EP as per his requirements. 408 409config TI_DAC7512 410 tristate "Texas Instruments DAC7512" 411 depends on SPI && SYSFS 412 help 413 If you say yes here you get support for the Texas Instruments 414 DAC7512 16-bit digital-to-analog converter. 415 416 This driver can also be built as a module. If so, the module 417 will be called ti_dac7512. 418 419config VMWARE_BALLOON 420 tristate "VMware Balloon Driver" 421 depends on X86 422 help 423 This is VMware physical memory management driver which acts 424 like a "balloon" that can be inflated to reclaim physical pages 425 by reserving them in the guest and invalidating them in the 426 monitor, freeing up the underlying machine pages so they can 427 be allocated to other guests. The balloon can also be deflated 428 to allow the guest to use more physical memory. 429 430 If unsure, say N. 431 432 To compile this driver as a module, choose M here: the 433 module will be called vmw_balloon. 434 435config ARM_CHARLCD 436 bool "ARM Ltd. Character LCD Driver" 437 depends on PLAT_VERSATILE 438 help 439 This is a driver for the character LCD found on the ARM Ltd. 440 Versatile and RealView Platform Baseboards. It doesn't do 441 very much more than display the text "ARM Linux" on the first 442 line and the Linux version on the second line, but that's 443 still useful. 444 445config BMP085 446 bool 447 depends on SYSFS 448 449config BMP085_I2C 450 tristate "BMP085 digital pressure sensor on I2C" 451 select BMP085 452 select REGMAP_I2C 453 depends on I2C && SYSFS 454 help 455 Say Y here if you want to support Bosch Sensortec's digital pressure 456 sensor hooked to an I2C bus. 457 458 To compile this driver as a module, choose M here: the 459 module will be called bmp085-i2c. 460 461config BMP085_SPI 462 tristate "BMP085 digital pressure sensor on SPI" 463 select BMP085 464 select REGMAP_SPI 465 depends on SPI_MASTER && SYSFS 466 help 467 Say Y here if you want to support Bosch Sensortec's digital pressure 468 sensor hooked to an SPI bus. 469 470 To compile this driver as a module, choose M here: the 471 module will be called bmp085-spi. 472 473config PCH_PHUB 474 tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB" 475 depends on PCI 476 help 477 This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of 478 Intel Topcliff which is an IOH(Input/Output Hub) for x86 embedded 479 processor. The Topcliff has MAC address and Option ROM data in SROM. 480 This driver can access MAC address and Option ROM data in SROM. 481 482 This driver also can be used for LAPIS Semiconductor's IOH, 483 ML7213/ML7223/ML7831. 484 ML7213 which is for IVI(In-Vehicle Infotainment) use. 485 ML7223 IOH is for MP(Media Phone) use. 486 ML7831 IOH is for general purpose use. 487 ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series. 488 ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH. 489 490 To compile this driver as a module, choose M here: the module will 491 be called pch_phub. 492 493config USB_SWITCH_FSA9480 494 tristate "FSA9480 USB Switch" 495 depends on I2C 496 help 497 The FSA9480 is a USB port accessory detector and switch. 498 The FSA9480 is fully controlled using I2C and enables USB data, 499 stereo and mono audio, video, microphone and UART data to use 500 a common connector port. 501 502source "drivers/misc/c2port/Kconfig" 503source "drivers/misc/eeprom/Kconfig" 504source "drivers/misc/cb710/Kconfig" 505source "drivers/misc/ti-st/Kconfig" 506source "drivers/misc/lis3lv02d/Kconfig" 507source "drivers/misc/carma/Kconfig" 508source "drivers/misc/altera-stapl/Kconfig" 509source "drivers/misc/mei/Kconfig" 510endmenu 511