1# 2# Misc strange devices 3# 4 5menu "Misc devices" 6 7config SENSORS_LIS3LV02D 8 tristate 9 depends on INPUT 10 select INPUT_POLLDEV 11 default n 12 13config AD525X_DPOT 14 tristate "Analog Devices Digital Potentiometers" 15 depends on (I2C || SPI) && SYSFS 16 help 17 If you say yes here, you get support for the Analog Devices 18 AD5258, AD5259, AD5251, AD5252, AD5253, AD5254, AD5255 19 AD5160, AD5161, AD5162, AD5165, AD5200, AD5201, AD5203, 20 AD5204, AD5206, AD5207, AD5231, AD5232, AD5233, AD5235, 21 AD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293, 22 AD7376, AD8400, AD8402, AD8403, ADN2850, AD5241, AD5242, 23 AD5243, AD5245, AD5246, AD5247, AD5248, AD5280, AD5282, 24 ADN2860, AD5273, AD5171, AD5170, AD5172, AD5173, AD5270, 25 AD5271, AD5272, AD5274 26 digital potentiometer chips. 27 28 See Documentation/misc-devices/ad525x_dpot.txt for the 29 userspace interface. 30 31 This driver can also be built as a module. If so, the module 32 will be called ad525x_dpot. 33 34config AD525X_DPOT_I2C 35 tristate "support I2C bus connection" 36 depends on AD525X_DPOT && I2C 37 help 38 Say Y here if you have a digital potentiometers hooked to an I2C bus. 39 40 To compile this driver as a module, choose M here: the 41 module will be called ad525x_dpot-i2c. 42 43config AD525X_DPOT_SPI 44 tristate "support SPI bus connection" 45 depends on AD525X_DPOT && SPI_MASTER 46 help 47 Say Y here if you have a digital potentiometers hooked to an SPI bus. 48 49 If unsure, say N (but it's safe to say "Y"). 50 51 To compile this driver as a module, choose M here: the 52 module will be called ad525x_dpot-spi. 53 54config ATMEL_PWM 55 tristate "Atmel AT32/AT91 PWM support" 56 depends on HAVE_CLK 57 help 58 This option enables device driver support for the PWM channels 59 on certain Atmel processors. Pulse Width Modulation is used for 60 purposes including software controlled power-efficient backlights 61 on LCD displays, motor control, and waveform generation. 62 63config AB8500_PWM 64 bool "AB8500 PWM support" 65 depends on AB8500_CORE && ARCH_U8500 66 select HAVE_PWM 67 help 68 This driver exports functions to enable/disble/config/free Pulse 69 Width Modulation in the Analog Baseband Chip AB8500. 70 It is used by led and backlight driver to control the intensity. 71 72config ATMEL_TCLIB 73 bool "Atmel AT32/AT91 Timer/Counter Library" 74 depends on (AVR32 || ARCH_AT91) 75 help 76 Select this if you want a library to allocate the Timer/Counter 77 blocks found on many Atmel processors. This facilitates using 78 these blocks by different drivers despite processor differences. 79 80config ATMEL_TCB_CLKSRC 81 bool "TC Block Clocksource" 82 depends on ATMEL_TCLIB 83 default y 84 help 85 Select this to get a high precision clocksource based on a 86 TC block with a 5+ MHz base clock rate. Two timer channels 87 are combined to make a single 32-bit timer. 88 89 When GENERIC_CLOCKEVENTS is defined, the third timer channel 90 may be used as a clock event device supporting oneshot mode 91 (delays of up to two seconds) based on the 32 KiHz clock. 92 93config ATMEL_TCB_CLKSRC_BLOCK 94 int 95 depends on ATMEL_TCB_CLKSRC 96 prompt "TC Block" if ARCH_AT91RM9200 || ARCH_AT91SAM9260 || CPU_AT32AP700X 97 default 0 98 range 0 1 99 help 100 Some chips provide more than one TC block, so you have the 101 choice of which one to use for the clock framework. The other 102 TC can be used for other purposes, such as PWM generation and 103 interval timing. 104 105config IBM_ASM 106 tristate "Device driver for IBM RSA service processor" 107 depends on X86 && PCI && INPUT && EXPERIMENTAL 108 ---help--- 109 This option enables device driver support for in-band access to the 110 IBM RSA (Condor) service processor in eServer xSeries systems. 111 The ibmasm device driver allows user space application to access 112 ASM (Advanced Systems Management) functions on the service 113 processor. The driver is meant to be used in conjunction with 114 a user space API. 115 The ibmasm driver also enables the OS to use the UART on the 116 service processor board as a regular serial port. To make use of 117 this feature serial driver support (CONFIG_SERIAL_8250) must be 118 enabled. 119 120 WARNING: This software may not be supported or function 121 correctly on your IBM server. Please consult the IBM ServerProven 122 website <http://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/> 123 for information on the specific driver level and support statement 124 for your IBM server. 125 126config PHANTOM 127 tristate "Sensable PHANToM (PCI)" 128 depends on PCI 129 help 130 Say Y here if you want to build a driver for Sensable PHANToM device. 131 132 This driver is only for PCI PHANToMs. 133 134 If you choose to build module, its name will be phantom. If unsure, 135 say N here. 136 137config INTEL_MID_PTI 138 tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard" 139 depends on PCI 140 default n 141 help 142 The PTI (Parallel Trace Interface) driver directs 143 trace data routed from various parts in the system out 144 through an Intel Penwell PTI port and out of the mobile 145 device for analysis with a debugging tool (Lauterbach or Fido). 146 147 You should select this driver if the target kernel is meant for 148 an Intel Atom (non-netbook) mobile device containing a MIPI 149 P1149.7 standard implementation. 150 151config SGI_IOC4 152 tristate "SGI IOC4 Base IO support" 153 depends on PCI 154 ---help--- 155 This option enables basic support for the IOC4 chip on certain 156 SGI IO controller cards (IO9, IO10, and PCI-RT). This option 157 does not enable any specific functions on such a card, but provides 158 necessary infrastructure for other drivers to utilize. 159 160 If you have an SGI Altix with an IOC4-based card say Y. 161 Otherwise say N. 162 163config TIFM_CORE 164 tristate "TI Flash Media interface support (EXPERIMENTAL)" 165 depends on EXPERIMENTAL && PCI 166 help 167 If you want support for Texas Instruments(R) Flash Media adapters 168 you should select this option and then also choose an appropriate 169 host adapter, such as 'TI Flash Media PCI74xx/PCI76xx host adapter 170 support', if you have a TI PCI74xx compatible card reader, for 171 example. 172 You will also have to select some flash card format drivers. MMC/SD 173 cards are supported via 'MMC/SD Card support: TI Flash Media MMC/SD 174 Interface support (MMC_TIFM_SD)'. 175 176 To compile this driver as a module, choose M here: the module will 177 be called tifm_core. 178 179config TIFM_7XX1 180 tristate "TI Flash Media PCI74xx/PCI76xx host adapter support (EXPERIMENTAL)" 181 depends on PCI && TIFM_CORE && EXPERIMENTAL 182 default TIFM_CORE 183 help 184 This option enables support for Texas Instruments(R) PCI74xx and 185 PCI76xx families of Flash Media adapters, found in many laptops. 186 To make actual use of the device, you will have to select some 187 flash card format drivers, as outlined in the TIFM_CORE Help. 188 189 To compile this driver as a module, choose M here: the module will 190 be called tifm_7xx1. 191 192config ICS932S401 193 tristate "Integrated Circuits ICS932S401" 194 depends on I2C && EXPERIMENTAL 195 help 196 If you say yes here you get support for the Integrated Circuits 197 ICS932S401 clock control chips. 198 199 This driver can also be built as a module. If so, the module 200 will be called ics932s401. 201 202config ATMEL_SSC 203 tristate "Device driver for Atmel SSC peripheral" 204 depends on AVR32 || ARCH_AT91 205 ---help--- 206 This option enables device driver support for Atmel Synchronized 207 Serial Communication peripheral (SSC). 208 209 The SSC peripheral supports a wide variety of serial frame based 210 communications, i.e. I2S, SPI, etc. 211 212 If unsure, say N. 213 214config ENCLOSURE_SERVICES 215 tristate "Enclosure Services" 216 default n 217 help 218 Provides support for intelligent enclosures (bays which 219 contain storage devices). You also need either a host 220 driver (SCSI/ATA) which supports enclosures 221 or a SCSI enclosure device (SES) to use these services. 222 223config SGI_XP 224 tristate "Support communication between SGI SSIs" 225 depends on NET 226 depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_UV) && SMP 227 select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 228 select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 229 select SGI_GRU if X86_64 && SMP 230 ---help--- 231 An SGI machine can be divided into multiple Single System 232 Images which act independently of each other and have 233 hardware based memory protection from the others. Enabling 234 this feature will allow for direct communication between SSIs 235 based on a network adapter and DMA messaging. 236 237config CS5535_MFGPT 238 tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support" 239 depends on PCI && X86 && MFD_CS5535 240 default n 241 help 242 This driver provides access to MFGPT functionality for other 243 drivers that need timers. MFGPTs are available in the CS5535 and 244 CS5536 companion chips that are found in AMD Geode and several 245 other platforms. They have a better resolution and max interval 246 than the generic PIT, and are suitable for use as high-res timers. 247 You probably don't want to enable this manually; other drivers that 248 make use of it should enable it. 249 250config CS5535_MFGPT_DEFAULT_IRQ 251 int 252 depends on CS5535_MFGPT 253 default 7 254 help 255 MFGPTs on the CS5535 require an interrupt. The selected IRQ 256 can be overridden as a module option as well as by driver that 257 use the cs5535_mfgpt_ API; however, different architectures might 258 want to use a different IRQ by default. This is here for 259 architectures to set as necessary. 260 261config CS5535_CLOCK_EVENT_SRC 262 tristate "CS5535/CS5536 high-res timer (MFGPT) events" 263 depends on GENERIC_CLOCKEVENTS && CS5535_MFGPT 264 help 265 This driver provides a clock event source based on the MFGPT 266 timer(s) in the CS5535 and CS5536 companion chips. 267 MFGPTs have a better resolution and max interval than the 268 generic PIT, and are suitable for use as high-res timers. 269 270config HP_ILO 271 tristate "Channel interface driver for the HP iLO processor" 272 depends on PCI 273 default n 274 help 275 The channel interface driver allows applications to communicate 276 with iLO management processors present on HP ProLiant servers. 277 Upon loading, the driver creates /dev/hpilo/dXccbN files, which 278 can be used to gather data from the management processor, via 279 read and write system calls. 280 281 To compile this driver as a module, choose M here: the 282 module will be called hpilo. 283 284config SGI_GRU 285 tristate "SGI GRU driver" 286 depends on X86_UV && SMP 287 default n 288 select MMU_NOTIFIER 289 ---help--- 290 The GRU is a hardware resource located in the system chipset. The GRU 291 contains memory that can be mmapped into the user address space. This memory is 292 used to communicate with the GRU to perform functions such as load/store, 293 scatter/gather, bcopy, AMOs, etc. The GRU is directly accessed by user 294 instructions using user virtual addresses. GRU instructions (ex., bcopy) use 295 user virtual addresses for operands. 296 297 If you are not running on a SGI UV system, say N. 298 299config SGI_GRU_DEBUG 300 bool "SGI GRU driver debug" 301 depends on SGI_GRU 302 default n 303 ---help--- 304 This option enables addition debugging code for the SGI GRU driver. If 305 you are unsure, say N. 306 307config APDS9802ALS 308 tristate "Medfield Avago APDS9802 ALS Sensor module" 309 depends on I2C 310 help 311 If you say yes here you get support for the ALS APDS9802 ambient 312 light sensor. 313 314 This driver can also be built as a module. If so, the module 315 will be called apds9802als. 316 317config ISL29003 318 tristate "Intersil ISL29003 ambient light sensor" 319 depends on I2C && SYSFS 320 help 321 If you say yes here you get support for the Intersil ISL29003 322 ambient light sensor. 323 324 This driver can also be built as a module. If so, the module 325 will be called isl29003. 326 327config ISL29020 328 tristate "Intersil ISL29020 ambient light sensor" 329 depends on I2C 330 help 331 If you say yes here you get support for the Intersil ISL29020 332 ambient light sensor. 333 334 This driver can also be built as a module. If so, the module 335 will be called isl29020. 336 337config SENSORS_TSL2550 338 tristate "Taos TSL2550 ambient light sensor" 339 depends on I2C && SYSFS 340 help 341 If you say yes here you get support for the Taos TSL2550 342 ambient light sensor. 343 344 This driver can also be built as a module. If so, the module 345 will be called tsl2550. 346 347config SENSORS_BH1780 348 tristate "ROHM BH1780GLI ambient light sensor" 349 depends on I2C && SYSFS 350 help 351 If you say yes here you get support for the ROHM BH1780GLI 352 ambient light sensor. 353 354 This driver can also be built as a module. If so, the module 355 will be called bh1780gli. 356 357config SENSORS_BH1770 358 tristate "BH1770GLC / SFH7770 combined ALS - Proximity sensor" 359 depends on I2C 360 ---help--- 361 Say Y here if you want to build a driver for BH1770GLC (ROHM) or 362 SFH7770 (Osram) combined ambient light and proximity sensor chip. 363 364 To compile this driver as a module, choose M here: the 365 module will be called bh1770glc. If unsure, say N here. 366 367config SENSORS_APDS990X 368 tristate "APDS990X combined als and proximity sensors" 369 depends on I2C 370 default n 371 ---help--- 372 Say Y here if you want to build a driver for Avago APDS990x 373 combined ambient light and proximity sensor chip. 374 375 To compile this driver as a module, choose M here: the 376 module will be called apds990x. If unsure, say N here. 377 378config HMC6352 379 tristate "Honeywell HMC6352 compass" 380 depends on I2C 381 help 382 This driver provides support for the Honeywell HMC6352 compass, 383 providing configuration and heading data via sysfs. 384 385config EP93XX_PWM 386 tristate "EP93xx PWM support" 387 depends on ARCH_EP93XX 388 help 389 This option enables device driver support for the PWM channels 390 on the Cirrus EP93xx processors. The EP9307 chip only has one 391 PWM channel all the others have two, the second channel is an 392 alternate function of the EGPIO14 pin. A sysfs interface is 393 provided to control the PWM channels. 394 395 To compile this driver as a module, choose M here: the module will 396 be called ep93xx_pwm. 397 398config DS1682 399 tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm" 400 depends on I2C && EXPERIMENTAL 401 help 402 If you say yes here you get support for Dallas Semiconductor 403 DS1682 Total Elapsed Time Recorder. 404 405 This driver can also be built as a module. If so, the module 406 will be called ds1682. 407 408config SPEAR13XX_PCIE_GADGET 409 bool "PCIe gadget support for SPEAr13XX platform" 410 depends on ARCH_SPEAR13XX 411 default n 412 help 413 This option enables gadget support for PCIe controller. If 414 board file defines any controller as PCIe endpoint then a sysfs 415 entry will be created for that controller. User can use these 416 sysfs node to configure PCIe EP as per his requirements. 417 418config TI_DAC7512 419 tristate "Texas Instruments DAC7512" 420 depends on SPI && SYSFS 421 help 422 If you say yes here you get support for the Texas Instruments 423 DAC7512 16-bit digital-to-analog converter. 424 425 This driver can also be built as a module. If so, the module 426 will be called ti_dac7512. 427 428config VMWARE_BALLOON 429 tristate "VMware Balloon Driver" 430 depends on X86 431 help 432 This is VMware physical memory management driver which acts 433 like a "balloon" that can be inflated to reclaim physical pages 434 by reserving them in the guest and invalidating them in the 435 monitor, freeing up the underlying machine pages so they can 436 be allocated to other guests. The balloon can also be deflated 437 to allow the guest to use more physical memory. 438 439 If unsure, say N. 440 441 To compile this driver as a module, choose M here: the 442 module will be called vmw_balloon. 443 444config ARM_CHARLCD 445 bool "ARM Ltd. Character LCD Driver" 446 depends on PLAT_VERSATILE 447 help 448 This is a driver for the character LCD found on the ARM Ltd. 449 Versatile and RealView Platform Baseboards. It doesn't do 450 very much more than display the text "ARM Linux" on the first 451 line and the Linux version on the second line, but that's 452 still useful. 453 454config BMP085 455 bool 456 depends on SYSFS 457 458config BMP085_I2C 459 tristate "BMP085 digital pressure sensor on I2C" 460 select BMP085 461 select REGMAP_I2C 462 depends on I2C && SYSFS 463 help 464 Say Y here if you want to support Bosch Sensortec's digital pressure 465 sensor hooked to an I2C bus. 466 467 To compile this driver as a module, choose M here: the 468 module will be called bmp085-i2c. 469 470config BMP085_SPI 471 tristate "BMP085 digital pressure sensor on SPI" 472 select BMP085 473 select REGMAP_SPI 474 depends on SPI_MASTER && SYSFS 475 help 476 Say Y here if you want to support Bosch Sensortec's digital pressure 477 sensor hooked to an SPI bus. 478 479 To compile this driver as a module, choose M here: the 480 module will be called bmp085-spi. 481 482config PCH_PHUB 483 tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB" 484 depends on PCI 485 help 486 This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of 487 Intel Topcliff which is an IOH(Input/Output Hub) for x86 embedded 488 processor. The Topcliff has MAC address and Option ROM data in SROM. 489 This driver can access MAC address and Option ROM data in SROM. 490 491 This driver also can be used for LAPIS Semiconductor's IOH, 492 ML7213/ML7223/ML7831. 493 ML7213 which is for IVI(In-Vehicle Infotainment) use. 494 ML7223 IOH is for MP(Media Phone) use. 495 ML7831 IOH is for general purpose use. 496 ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series. 497 ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH. 498 499 To compile this driver as a module, choose M here: the module will 500 be called pch_phub. 501 502config USB_SWITCH_FSA9480 503 tristate "FSA9480 USB Switch" 504 depends on I2C 505 help 506 The FSA9480 is a USB port accessory detector and switch. 507 The FSA9480 is fully controlled using I2C and enables USB data, 508 stereo and mono audio, video, microphone and UART data to use 509 a common connector port. 510 511source "drivers/misc/c2port/Kconfig" 512source "drivers/misc/eeprom/Kconfig" 513source "drivers/misc/cb710/Kconfig" 514source "drivers/misc/iwmc3200top/Kconfig" 515source "drivers/misc/ti-st/Kconfig" 516source "drivers/misc/lis3lv02d/Kconfig" 517source "drivers/misc/carma/Kconfig" 518source "drivers/misc/altera-stapl/Kconfig" 519source "drivers/misc/mei/Kconfig" 520endmenu 521