1# 2# Misc strange devices 3# 4 5menu "Misc devices" 6 7config SENSORS_LIS3LV02D 8 tristate 9 depends on INPUT 10 select INPUT_POLLDEV 11 default n 12 13config AD525X_DPOT 14 tristate "Analog Devices Digital Potentiometers" 15 depends on (I2C || SPI) && SYSFS 16 help 17 If you say yes here, you get support for the Analog Devices 18 AD5258, AD5259, AD5251, AD5252, AD5253, AD5254, AD5255 19 AD5160, AD5161, AD5162, AD5165, AD5200, AD5201, AD5203, 20 AD5204, AD5206, AD5207, AD5231, AD5232, AD5233, AD5235, 21 AD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293, 22 AD7376, AD8400, AD8402, AD8403, ADN2850, AD5241, AD5242, 23 AD5243, AD5245, AD5246, AD5247, AD5248, AD5280, AD5282, 24 ADN2860, AD5273, AD5171, AD5170, AD5172, AD5173, AD5270, 25 AD5271, AD5272, AD5274 26 digital potentiometer chips. 27 28 See Documentation/misc-devices/ad525x_dpot.txt for the 29 userspace interface. 30 31 This driver can also be built as a module. If so, the module 32 will be called ad525x_dpot. 33 34config AD525X_DPOT_I2C 35 tristate "support I2C bus connection" 36 depends on AD525X_DPOT && I2C 37 help 38 Say Y here if you have a digital potentiometers hooked to an I2C bus. 39 40 To compile this driver as a module, choose M here: the 41 module will be called ad525x_dpot-i2c. 42 43config AD525X_DPOT_SPI 44 tristate "support SPI bus connection" 45 depends on AD525X_DPOT && SPI_MASTER 46 help 47 Say Y here if you have a digital potentiometers hooked to an SPI bus. 48 49 If unsure, say N (but it's safe to say "Y"). 50 51 To compile this driver as a module, choose M here: the 52 module will be called ad525x_dpot-spi. 53 54config ATMEL_PWM 55 tristate "Atmel AT32/AT91 PWM support" 56 depends on HAVE_CLK 57 help 58 This option enables device driver support for the PWM channels 59 on certain Atmel processors. Pulse Width Modulation is used for 60 purposes including software controlled power-efficient backlights 61 on LCD displays, motor control, and waveform generation. 62 63config AB8500_PWM 64 bool "AB8500 PWM support" 65 depends on AB8500_CORE && ARCH_U8500 66 select HAVE_PWM 67 depends on !PWM 68 help 69 This driver exports functions to enable/disble/config/free Pulse 70 Width Modulation in the Analog Baseband Chip AB8500. 71 It is used by led and backlight driver to control the intensity. 72 73config ATMEL_TCLIB 74 bool "Atmel AT32/AT91 Timer/Counter Library" 75 depends on (AVR32 || ARCH_AT91) 76 help 77 Select this if you want a library to allocate the Timer/Counter 78 blocks found on many Atmel processors. This facilitates using 79 these blocks by different drivers despite processor differences. 80 81config ATMEL_TCB_CLKSRC 82 bool "TC Block Clocksource" 83 depends on ATMEL_TCLIB 84 default y 85 help 86 Select this to get a high precision clocksource based on a 87 TC block with a 5+ MHz base clock rate. Two timer channels 88 are combined to make a single 32-bit timer. 89 90 When GENERIC_CLOCKEVENTS is defined, the third timer channel 91 may be used as a clock event device supporting oneshot mode 92 (delays of up to two seconds) based on the 32 KiHz clock. 93 94config ATMEL_TCB_CLKSRC_BLOCK 95 int 96 depends on ATMEL_TCB_CLKSRC 97 prompt "TC Block" if ARCH_AT91RM9200 || ARCH_AT91SAM9260 || CPU_AT32AP700X 98 default 0 99 range 0 1 100 help 101 Some chips provide more than one TC block, so you have the 102 choice of which one to use for the clock framework. The other 103 TC can be used for other purposes, such as PWM generation and 104 interval timing. 105 106config IBM_ASM 107 tristate "Device driver for IBM RSA service processor" 108 depends on X86 && PCI && INPUT && EXPERIMENTAL 109 ---help--- 110 This option enables device driver support for in-band access to the 111 IBM RSA (Condor) service processor in eServer xSeries systems. 112 The ibmasm device driver allows user space application to access 113 ASM (Advanced Systems Management) functions on the service 114 processor. The driver is meant to be used in conjunction with 115 a user space API. 116 The ibmasm driver also enables the OS to use the UART on the 117 service processor board as a regular serial port. To make use of 118 this feature serial driver support (CONFIG_SERIAL_8250) must be 119 enabled. 120 121 WARNING: This software may not be supported or function 122 correctly on your IBM server. Please consult the IBM ServerProven 123 website <http://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/> 124 for information on the specific driver level and support statement 125 for your IBM server. 126 127config PHANTOM 128 tristate "Sensable PHANToM (PCI)" 129 depends on PCI 130 help 131 Say Y here if you want to build a driver for Sensable PHANToM device. 132 133 This driver is only for PCI PHANToMs. 134 135 If you choose to build module, its name will be phantom. If unsure, 136 say N here. 137 138config INTEL_MID_PTI 139 tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard" 140 depends on PCI 141 default n 142 help 143 The PTI (Parallel Trace Interface) driver directs 144 trace data routed from various parts in the system out 145 through an Intel Penwell PTI port and out of the mobile 146 device for analysis with a debugging tool (Lauterbach or Fido). 147 148 You should select this driver if the target kernel is meant for 149 an Intel Atom (non-netbook) mobile device containing a MIPI 150 P1149.7 standard implementation. 151 152config SGI_IOC4 153 tristate "SGI IOC4 Base IO support" 154 depends on PCI 155 ---help--- 156 This option enables basic support for the IOC4 chip on certain 157 SGI IO controller cards (IO9, IO10, and PCI-RT). This option 158 does not enable any specific functions on such a card, but provides 159 necessary infrastructure for other drivers to utilize. 160 161 If you have an SGI Altix with an IOC4-based card say Y. 162 Otherwise say N. 163 164config TIFM_CORE 165 tristate "TI Flash Media interface support (EXPERIMENTAL)" 166 depends on EXPERIMENTAL && PCI 167 help 168 If you want support for Texas Instruments(R) Flash Media adapters 169 you should select this option and then also choose an appropriate 170 host adapter, such as 'TI Flash Media PCI74xx/PCI76xx host adapter 171 support', if you have a TI PCI74xx compatible card reader, for 172 example. 173 You will also have to select some flash card format drivers. MMC/SD 174 cards are supported via 'MMC/SD Card support: TI Flash Media MMC/SD 175 Interface support (MMC_TIFM_SD)'. 176 177 To compile this driver as a module, choose M here: the module will 178 be called tifm_core. 179 180config TIFM_7XX1 181 tristate "TI Flash Media PCI74xx/PCI76xx host adapter support (EXPERIMENTAL)" 182 depends on PCI && TIFM_CORE && EXPERIMENTAL 183 default TIFM_CORE 184 help 185 This option enables support for Texas Instruments(R) PCI74xx and 186 PCI76xx families of Flash Media adapters, found in many laptops. 187 To make actual use of the device, you will have to select some 188 flash card format drivers, as outlined in the TIFM_CORE Help. 189 190 To compile this driver as a module, choose M here: the module will 191 be called tifm_7xx1. 192 193config ICS932S401 194 tristate "Integrated Circuits ICS932S401" 195 depends on I2C && EXPERIMENTAL 196 help 197 If you say yes here you get support for the Integrated Circuits 198 ICS932S401 clock control chips. 199 200 This driver can also be built as a module. If so, the module 201 will be called ics932s401. 202 203config ATMEL_SSC 204 tristate "Device driver for Atmel SSC peripheral" 205 depends on AVR32 || ARCH_AT91 206 ---help--- 207 This option enables device driver support for Atmel Synchronized 208 Serial Communication peripheral (SSC). 209 210 The SSC peripheral supports a wide variety of serial frame based 211 communications, i.e. I2S, SPI, etc. 212 213 If unsure, say N. 214 215config ENCLOSURE_SERVICES 216 tristate "Enclosure Services" 217 default n 218 help 219 Provides support for intelligent enclosures (bays which 220 contain storage devices). You also need either a host 221 driver (SCSI/ATA) which supports enclosures 222 or a SCSI enclosure device (SES) to use these services. 223 224config SGI_XP 225 tristate "Support communication between SGI SSIs" 226 depends on NET 227 depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_UV) && SMP 228 select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 229 select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 230 select SGI_GRU if X86_64 && SMP 231 ---help--- 232 An SGI machine can be divided into multiple Single System 233 Images which act independently of each other and have 234 hardware based memory protection from the others. Enabling 235 this feature will allow for direct communication between SSIs 236 based on a network adapter and DMA messaging. 237 238config CS5535_MFGPT 239 tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support" 240 depends on PCI && X86 && MFD_CS5535 241 default n 242 help 243 This driver provides access to MFGPT functionality for other 244 drivers that need timers. MFGPTs are available in the CS5535 and 245 CS5536 companion chips that are found in AMD Geode and several 246 other platforms. They have a better resolution and max interval 247 than the generic PIT, and are suitable for use as high-res timers. 248 You probably don't want to enable this manually; other drivers that 249 make use of it should enable it. 250 251config CS5535_MFGPT_DEFAULT_IRQ 252 int 253 depends on CS5535_MFGPT 254 default 7 255 help 256 MFGPTs on the CS5535 require an interrupt. The selected IRQ 257 can be overridden as a module option as well as by driver that 258 use the cs5535_mfgpt_ API; however, different architectures might 259 want to use a different IRQ by default. This is here for 260 architectures to set as necessary. 261 262config CS5535_CLOCK_EVENT_SRC 263 tristate "CS5535/CS5536 high-res timer (MFGPT) events" 264 depends on GENERIC_CLOCKEVENTS && CS5535_MFGPT 265 help 266 This driver provides a clock event source based on the MFGPT 267 timer(s) in the CS5535 and CS5536 companion chips. 268 MFGPTs have a better resolution and max interval than the 269 generic PIT, and are suitable for use as high-res timers. 270 271config HP_ILO 272 tristate "Channel interface driver for the HP iLO processor" 273 depends on PCI 274 default n 275 help 276 The channel interface driver allows applications to communicate 277 with iLO management processors present on HP ProLiant servers. 278 Upon loading, the driver creates /dev/hpilo/dXccbN files, which 279 can be used to gather data from the management processor, via 280 read and write system calls. 281 282 To compile this driver as a module, choose M here: the 283 module will be called hpilo. 284 285config SGI_GRU 286 tristate "SGI GRU driver" 287 depends on X86_UV && SMP 288 default n 289 select MMU_NOTIFIER 290 ---help--- 291 The GRU is a hardware resource located in the system chipset. The GRU 292 contains memory that can be mmapped into the user address space. This memory is 293 used to communicate with the GRU to perform functions such as load/store, 294 scatter/gather, bcopy, AMOs, etc. The GRU is directly accessed by user 295 instructions using user virtual addresses. GRU instructions (ex., bcopy) use 296 user virtual addresses for operands. 297 298 If you are not running on a SGI UV system, say N. 299 300config SGI_GRU_DEBUG 301 bool "SGI GRU driver debug" 302 depends on SGI_GRU 303 default n 304 ---help--- 305 This option enables addition debugging code for the SGI GRU driver. If 306 you are unsure, say N. 307 308config APDS9802ALS 309 tristate "Medfield Avago APDS9802 ALS Sensor module" 310 depends on I2C 311 help 312 If you say yes here you get support for the ALS APDS9802 ambient 313 light sensor. 314 315 This driver can also be built as a module. If so, the module 316 will be called apds9802als. 317 318config ISL29003 319 tristate "Intersil ISL29003 ambient light sensor" 320 depends on I2C && SYSFS 321 help 322 If you say yes here you get support for the Intersil ISL29003 323 ambient light sensor. 324 325 This driver can also be built as a module. If so, the module 326 will be called isl29003. 327 328config ISL29020 329 tristate "Intersil ISL29020 ambient light sensor" 330 depends on I2C 331 help 332 If you say yes here you get support for the Intersil ISL29020 333 ambient light sensor. 334 335 This driver can also be built as a module. If so, the module 336 will be called isl29020. 337 338config SENSORS_TSL2550 339 tristate "Taos TSL2550 ambient light sensor" 340 depends on I2C && SYSFS 341 help 342 If you say yes here you get support for the Taos TSL2550 343 ambient light sensor. 344 345 This driver can also be built as a module. If so, the module 346 will be called tsl2550. 347 348config SENSORS_BH1780 349 tristate "ROHM BH1780GLI ambient light sensor" 350 depends on I2C && SYSFS 351 help 352 If you say yes here you get support for the ROHM BH1780GLI 353 ambient light sensor. 354 355 This driver can also be built as a module. If so, the module 356 will be called bh1780gli. 357 358config SENSORS_BH1770 359 tristate "BH1770GLC / SFH7770 combined ALS - Proximity sensor" 360 depends on I2C 361 ---help--- 362 Say Y here if you want to build a driver for BH1770GLC (ROHM) or 363 SFH7770 (Osram) combined ambient light and proximity sensor chip. 364 365 To compile this driver as a module, choose M here: the 366 module will be called bh1770glc. If unsure, say N here. 367 368config SENSORS_APDS990X 369 tristate "APDS990X combined als and proximity sensors" 370 depends on I2C 371 default n 372 ---help--- 373 Say Y here if you want to build a driver for Avago APDS990x 374 combined ambient light and proximity sensor chip. 375 376 To compile this driver as a module, choose M here: the 377 module will be called apds990x. If unsure, say N here. 378 379config HMC6352 380 tristate "Honeywell HMC6352 compass" 381 depends on I2C 382 help 383 This driver provides support for the Honeywell HMC6352 compass, 384 providing configuration and heading data via sysfs. 385 386config EP93XX_PWM 387 tristate "EP93xx PWM support" 388 depends on ARCH_EP93XX 389 help 390 This option enables device driver support for the PWM channels 391 on the Cirrus EP93xx processors. The EP9307 chip only has one 392 PWM channel all the others have two, the second channel is an 393 alternate function of the EGPIO14 pin. A sysfs interface is 394 provided to control the PWM channels. 395 396 To compile this driver as a module, choose M here: the module will 397 be called ep93xx_pwm. 398 399config DS1682 400 tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm" 401 depends on I2C && EXPERIMENTAL 402 help 403 If you say yes here you get support for Dallas Semiconductor 404 DS1682 Total Elapsed Time Recorder. 405 406 This driver can also be built as a module. If so, the module 407 will be called ds1682. 408 409config SPEAR13XX_PCIE_GADGET 410 bool "PCIe gadget support for SPEAr13XX platform" 411 depends on ARCH_SPEAR13XX 412 default n 413 help 414 This option enables gadget support for PCIe controller. If 415 board file defines any controller as PCIe endpoint then a sysfs 416 entry will be created for that controller. User can use these 417 sysfs node to configure PCIe EP as per his requirements. 418 419config TI_DAC7512 420 tristate "Texas Instruments DAC7512" 421 depends on SPI && SYSFS 422 help 423 If you say yes here you get support for the Texas Instruments 424 DAC7512 16-bit digital-to-analog converter. 425 426 This driver can also be built as a module. If so, the module 427 will be called ti_dac7512. 428 429config VMWARE_BALLOON 430 tristate "VMware Balloon Driver" 431 depends on X86 432 help 433 This is VMware physical memory management driver which acts 434 like a "balloon" that can be inflated to reclaim physical pages 435 by reserving them in the guest and invalidating them in the 436 monitor, freeing up the underlying machine pages so they can 437 be allocated to other guests. The balloon can also be deflated 438 to allow the guest to use more physical memory. 439 440 If unsure, say N. 441 442 To compile this driver as a module, choose M here: the 443 module will be called vmw_balloon. 444 445config ARM_CHARLCD 446 bool "ARM Ltd. Character LCD Driver" 447 depends on PLAT_VERSATILE 448 help 449 This is a driver for the character LCD found on the ARM Ltd. 450 Versatile and RealView Platform Baseboards. It doesn't do 451 very much more than display the text "ARM Linux" on the first 452 line and the Linux version on the second line, but that's 453 still useful. 454 455config BMP085 456 bool 457 depends on SYSFS 458 459config BMP085_I2C 460 tristate "BMP085 digital pressure sensor on I2C" 461 select BMP085 462 select REGMAP_I2C 463 depends on I2C && SYSFS 464 help 465 Say Y here if you want to support Bosch Sensortec's digital pressure 466 sensor hooked to an I2C bus. 467 468 To compile this driver as a module, choose M here: the 469 module will be called bmp085-i2c. 470 471config BMP085_SPI 472 tristate "BMP085 digital pressure sensor on SPI" 473 select BMP085 474 select REGMAP_SPI 475 depends on SPI_MASTER && SYSFS 476 help 477 Say Y here if you want to support Bosch Sensortec's digital pressure 478 sensor hooked to an SPI bus. 479 480 To compile this driver as a module, choose M here: the 481 module will be called bmp085-spi. 482 483config PCH_PHUB 484 tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB" 485 depends on PCI 486 help 487 This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of 488 Intel Topcliff which is an IOH(Input/Output Hub) for x86 embedded 489 processor. The Topcliff has MAC address and Option ROM data in SROM. 490 This driver can access MAC address and Option ROM data in SROM. 491 492 This driver also can be used for LAPIS Semiconductor's IOH, 493 ML7213/ML7223/ML7831. 494 ML7213 which is for IVI(In-Vehicle Infotainment) use. 495 ML7223 IOH is for MP(Media Phone) use. 496 ML7831 IOH is for general purpose use. 497 ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series. 498 ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH. 499 500 To compile this driver as a module, choose M here: the module will 501 be called pch_phub. 502 503config USB_SWITCH_FSA9480 504 tristate "FSA9480 USB Switch" 505 depends on I2C 506 help 507 The FSA9480 is a USB port accessory detector and switch. 508 The FSA9480 is fully controlled using I2C and enables USB data, 509 stereo and mono audio, video, microphone and UART data to use 510 a common connector port. 511 512source "drivers/misc/c2port/Kconfig" 513source "drivers/misc/eeprom/Kconfig" 514source "drivers/misc/cb710/Kconfig" 515source "drivers/misc/ti-st/Kconfig" 516source "drivers/misc/lis3lv02d/Kconfig" 517source "drivers/misc/carma/Kconfig" 518source "drivers/misc/altera-stapl/Kconfig" 519source "drivers/misc/mei/Kconfig" 520endmenu 521