1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Misc strange devices 4# 5 6menu "Misc devices" 7 8config SENSORS_LIS3LV02D 9 tristate 10 depends on INPUT 11 select INPUT_POLLDEV 12 13config AD525X_DPOT 14 tristate "Analog Devices Digital Potentiometers" 15 depends on (I2C || SPI) && SYSFS 16 help 17 If you say yes here, you get support for the Analog Devices 18 AD5258, AD5259, AD5251, AD5252, AD5253, AD5254, AD5255 19 AD5160, AD5161, AD5162, AD5165, AD5200, AD5201, AD5203, 20 AD5204, AD5206, AD5207, AD5231, AD5232, AD5233, AD5235, 21 AD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293, 22 AD7376, AD8400, AD8402, AD8403, ADN2850, AD5241, AD5242, 23 AD5243, AD5245, AD5246, AD5247, AD5248, AD5280, AD5282, 24 ADN2860, AD5273, AD5171, AD5170, AD5172, AD5173, AD5270, 25 AD5271, AD5272, AD5274 26 digital potentiometer chips. 27 28 See Documentation/misc-devices/ad525x_dpot.txt for the 29 userspace interface. 30 31 This driver can also be built as a module. If so, the module 32 will be called ad525x_dpot. 33 34config AD525X_DPOT_I2C 35 tristate "support I2C bus connection" 36 depends on AD525X_DPOT && I2C 37 help 38 Say Y here if you have a digital potentiometers hooked to an I2C bus. 39 40 To compile this driver as a module, choose M here: the 41 module will be called ad525x_dpot-i2c. 42 43config AD525X_DPOT_SPI 44 tristate "support SPI bus connection" 45 depends on AD525X_DPOT && SPI_MASTER 46 help 47 Say Y here if you have a digital potentiometers hooked to an SPI bus. 48 49 If unsure, say N (but it's safe to say "Y"). 50 51 To compile this driver as a module, choose M here: the 52 module will be called ad525x_dpot-spi. 53 54config ATMEL_TCLIB 55 bool "Atmel AT32/AT91 Timer/Counter Library" 56 depends on ARCH_AT91 57 help 58 Select this if you want a library to allocate the Timer/Counter 59 blocks found on many Atmel processors. This facilitates using 60 these blocks by different drivers despite processor differences. 61 62config DUMMY_IRQ 63 tristate "Dummy IRQ handler" 64 ---help--- 65 This module accepts a single 'irq' parameter, which it should register for. 66 The sole purpose of this module is to help with debugging of systems on 67 which spurious IRQs would happen on disabled IRQ vector. 68 69config IBM_ASM 70 tristate "Device driver for IBM RSA service processor" 71 depends on X86 && PCI && INPUT 72 depends on SERIAL_8250 || SERIAL_8250=n 73 ---help--- 74 This option enables device driver support for in-band access to the 75 IBM RSA (Condor) service processor in eServer xSeries systems. 76 The ibmasm device driver allows user space application to access 77 ASM (Advanced Systems Management) functions on the service 78 processor. The driver is meant to be used in conjunction with 79 a user space API. 80 The ibmasm driver also enables the OS to use the UART on the 81 service processor board as a regular serial port. To make use of 82 this feature serial driver support (CONFIG_SERIAL_8250) must be 83 enabled. 84 85 WARNING: This software may not be supported or function 86 correctly on your IBM server. Please consult the IBM ServerProven 87 website <http://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/> 88 for information on the specific driver level and support statement 89 for your IBM server. 90 91config IBMVMC 92 tristate "IBM Virtual Management Channel support" 93 depends on PPC_PSERIES 94 help 95 This is the IBM POWER Virtual Management Channel 96 97 This driver is to be used for the POWER Virtual 98 Management Channel virtual adapter on the PowerVM 99 platform. It provides both request/response and 100 async message support through the /dev/ibmvmc node. 101 102 To compile this driver as a module, choose M here: the 103 module will be called ibmvmc. 104 105config PHANTOM 106 tristate "Sensable PHANToM (PCI)" 107 depends on PCI 108 help 109 Say Y here if you want to build a driver for Sensable PHANToM device. 110 111 This driver is only for PCI PHANToMs. 112 113 If you choose to build module, its name will be phantom. If unsure, 114 say N here. 115 116config INTEL_MID_PTI 117 tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard" 118 depends on PCI && TTY && (X86_INTEL_MID || COMPILE_TEST) 119 help 120 The PTI (Parallel Trace Interface) driver directs 121 trace data routed from various parts in the system out 122 through an Intel Penwell PTI port and out of the mobile 123 device for analysis with a debugging tool (Lauterbach or Fido). 124 125 You should select this driver if the target kernel is meant for 126 an Intel Atom (non-netbook) mobile device containing a MIPI 127 P1149.7 standard implementation. 128 129config TIFM_CORE 130 tristate "TI Flash Media interface support" 131 depends on PCI 132 help 133 If you want support for Texas Instruments(R) Flash Media adapters 134 you should select this option and then also choose an appropriate 135 host adapter, such as 'TI Flash Media PCI74xx/PCI76xx host adapter 136 support', if you have a TI PCI74xx compatible card reader, for 137 example. 138 You will also have to select some flash card format drivers. MMC/SD 139 cards are supported via 'MMC/SD Card support: TI Flash Media MMC/SD 140 Interface support (MMC_TIFM_SD)'. 141 142 To compile this driver as a module, choose M here: the module will 143 be called tifm_core. 144 145config TIFM_7XX1 146 tristate "TI Flash Media PCI74xx/PCI76xx host adapter support" 147 depends on PCI && TIFM_CORE 148 default TIFM_CORE 149 help 150 This option enables support for Texas Instruments(R) PCI74xx and 151 PCI76xx families of Flash Media adapters, found in many laptops. 152 To make actual use of the device, you will have to select some 153 flash card format drivers, as outlined in the TIFM_CORE Help. 154 155 To compile this driver as a module, choose M here: the module will 156 be called tifm_7xx1. 157 158config ICS932S401 159 tristate "Integrated Circuits ICS932S401" 160 depends on I2C 161 help 162 If you say yes here you get support for the Integrated Circuits 163 ICS932S401 clock control chips. 164 165 This driver can also be built as a module. If so, the module 166 will be called ics932s401. 167 168config ATMEL_SSC 169 tristate "Device driver for Atmel SSC peripheral" 170 depends on HAS_IOMEM && (ARCH_AT91 || COMPILE_TEST) 171 ---help--- 172 This option enables device driver support for Atmel Synchronized 173 Serial Communication peripheral (SSC). 174 175 The SSC peripheral supports a wide variety of serial frame based 176 communications, i.e. I2S, SPI, etc. 177 178 If unsure, say N. 179 180config ENCLOSURE_SERVICES 181 tristate "Enclosure Services" 182 help 183 Provides support for intelligent enclosures (bays which 184 contain storage devices). You also need either a host 185 driver (SCSI/ATA) which supports enclosures 186 or a SCSI enclosure device (SES) to use these services. 187 188config SGI_XP 189 tristate "Support communication between SGI SSIs" 190 depends on NET 191 depends on (IA64_SGI_UV || X86_UV) && SMP 192 depends on X86_64 || BROKEN 193 select SGI_GRU if X86_64 && SMP 194 ---help--- 195 An SGI machine can be divided into multiple Single System 196 Images which act independently of each other and have 197 hardware based memory protection from the others. Enabling 198 this feature will allow for direct communication between SSIs 199 based on a network adapter and DMA messaging. 200 201config CS5535_MFGPT 202 tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support" 203 depends on MFD_CS5535 204 help 205 This driver provides access to MFGPT functionality for other 206 drivers that need timers. MFGPTs are available in the CS5535 and 207 CS5536 companion chips that are found in AMD Geode and several 208 other platforms. They have a better resolution and max interval 209 than the generic PIT, and are suitable for use as high-res timers. 210 You probably don't want to enable this manually; other drivers that 211 make use of it should enable it. 212 213config CS5535_MFGPT_DEFAULT_IRQ 214 int 215 depends on CS5535_MFGPT 216 default 7 217 help 218 MFGPTs on the CS5535 require an interrupt. The selected IRQ 219 can be overridden as a module option as well as by driver that 220 use the cs5535_mfgpt_ API; however, different architectures might 221 want to use a different IRQ by default. This is here for 222 architectures to set as necessary. 223 224config CS5535_CLOCK_EVENT_SRC 225 tristate "CS5535/CS5536 high-res timer (MFGPT) events" 226 depends on GENERIC_CLOCKEVENTS && CS5535_MFGPT 227 help 228 This driver provides a clock event source based on the MFGPT 229 timer(s) in the CS5535 and CS5536 companion chips. 230 MFGPTs have a better resolution and max interval than the 231 generic PIT, and are suitable for use as high-res timers. 232 233config HP_ILO 234 tristate "Channel interface driver for the HP iLO processor" 235 depends on PCI 236 help 237 The channel interface driver allows applications to communicate 238 with iLO management processors present on HP ProLiant servers. 239 Upon loading, the driver creates /dev/hpilo/dXccbN files, which 240 can be used to gather data from the management processor, via 241 read and write system calls. 242 243 To compile this driver as a module, choose M here: the 244 module will be called hpilo. 245 246config QCOM_COINCELL 247 tristate "Qualcomm coincell charger support" 248 depends on MFD_SPMI_PMIC || COMPILE_TEST 249 help 250 This driver supports the coincell block found inside of 251 Qualcomm PMICs. The coincell charger provides a means to 252 charge a coincell battery or backup capacitor which is used 253 to maintain PMIC register and RTC state in the absence of 254 external power. 255 256config QCOM_FASTRPC 257 tristate "Qualcomm FastRPC" 258 depends on ARCH_QCOM || COMPILE_TEST 259 depends on RPMSG 260 select DMA_SHARED_BUFFER 261 help 262 Provides a communication mechanism that allows for clients to 263 make remote method invocations across processor boundary to 264 applications DSP processor. Say M if you want to enable this 265 module. 266 267config SGI_GRU 268 tristate "SGI GRU driver" 269 depends on X86_UV && SMP 270 select MMU_NOTIFIER 271 ---help--- 272 The GRU is a hardware resource located in the system chipset. The GRU 273 contains memory that can be mmapped into the user address space. This memory is 274 used to communicate with the GRU to perform functions such as load/store, 275 scatter/gather, bcopy, AMOs, etc. The GRU is directly accessed by user 276 instructions using user virtual addresses. GRU instructions (ex., bcopy) use 277 user virtual addresses for operands. 278 279 If you are not running on a SGI UV system, say N. 280 281config SGI_GRU_DEBUG 282 bool "SGI GRU driver debug" 283 depends on SGI_GRU 284 ---help--- 285 This option enables additional debugging code for the SGI GRU driver. 286 If you are unsure, say N. 287 288config APDS9802ALS 289 tristate "Medfield Avago APDS9802 ALS Sensor module" 290 depends on I2C 291 help 292 If you say yes here you get support for the ALS APDS9802 ambient 293 light sensor. 294 295 This driver can also be built as a module. If so, the module 296 will be called apds9802als. 297 298config ISL29003 299 tristate "Intersil ISL29003 ambient light sensor" 300 depends on I2C && SYSFS 301 help 302 If you say yes here you get support for the Intersil ISL29003 303 ambient light sensor. 304 305 This driver can also be built as a module. If so, the module 306 will be called isl29003. 307 308config ISL29020 309 tristate "Intersil ISL29020 ambient light sensor" 310 depends on I2C 311 help 312 If you say yes here you get support for the Intersil ISL29020 313 ambient light sensor. 314 315 This driver can also be built as a module. If so, the module 316 will be called isl29020. 317 318config SENSORS_TSL2550 319 tristate "Taos TSL2550 ambient light sensor" 320 depends on I2C && SYSFS 321 help 322 If you say yes here you get support for the Taos TSL2550 323 ambient light sensor. 324 325 This driver can also be built as a module. If so, the module 326 will be called tsl2550. 327 328config SENSORS_BH1770 329 tristate "BH1770GLC / SFH7770 combined ALS - Proximity sensor" 330 depends on I2C 331 ---help--- 332 Say Y here if you want to build a driver for BH1770GLC (ROHM) or 333 SFH7770 (Osram) combined ambient light and proximity sensor chip. 334 335 To compile this driver as a module, choose M here: the 336 module will be called bh1770glc. If unsure, say N here. 337 338config SENSORS_APDS990X 339 tristate "APDS990X combined als and proximity sensors" 340 depends on I2C 341 ---help--- 342 Say Y here if you want to build a driver for Avago APDS990x 343 combined ambient light and proximity sensor chip. 344 345 To compile this driver as a module, choose M here: the 346 module will be called apds990x. If unsure, say N here. 347 348config HMC6352 349 tristate "Honeywell HMC6352 compass" 350 depends on I2C 351 help 352 This driver provides support for the Honeywell HMC6352 compass, 353 providing configuration and heading data via sysfs. 354 355config DS1682 356 tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm" 357 depends on I2C 358 help 359 If you say yes here you get support for Dallas Semiconductor 360 DS1682 Total Elapsed Time Recorder. 361 362 This driver can also be built as a module. If so, the module 363 will be called ds1682. 364 365config VMWARE_BALLOON 366 tristate "VMware Balloon Driver" 367 depends on VMWARE_VMCI && X86 && HYPERVISOR_GUEST 368 select MEMORY_BALLOON 369 help 370 This is VMware physical memory management driver which acts 371 like a "balloon" that can be inflated to reclaim physical pages 372 by reserving them in the guest and invalidating them in the 373 monitor, freeing up the underlying machine pages so they can 374 be allocated to other guests. The balloon can also be deflated 375 to allow the guest to use more physical memory. 376 377 If unsure, say N. 378 379 To compile this driver as a module, choose M here: the 380 module will be called vmw_balloon. 381 382config PCH_PHUB 383 tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB" 384 select GENERIC_NET_UTILS 385 depends on PCI && (X86_32 || MIPS || COMPILE_TEST) 386 help 387 This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of 388 Intel Topcliff which is an IOH(Input/Output Hub) for x86 embedded 389 processor. The Topcliff has MAC address and Option ROM data in SROM. 390 This driver can access MAC address and Option ROM data in SROM. 391 392 This driver also can be used for LAPIS Semiconductor's IOH, 393 ML7213/ML7223/ML7831. 394 ML7213 which is for IVI(In-Vehicle Infotainment) use. 395 ML7223 IOH is for MP(Media Phone) use. 396 ML7831 IOH is for general purpose use. 397 ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series. 398 ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH. 399 400 To compile this driver as a module, choose M here: the module will 401 be called pch_phub. 402 403config LATTICE_ECP3_CONFIG 404 tristate "Lattice ECP3 FPGA bitstream configuration via SPI" 405 depends on SPI && SYSFS 406 select FW_LOADER 407 default n 408 help 409 This option enables support for bitstream configuration (programming 410 or loading) of the Lattice ECP3 FPGA family via SPI. 411 412 If unsure, say N. 413 414config SRAM 415 bool "Generic on-chip SRAM driver" 416 depends on HAS_IOMEM 417 select GENERIC_ALLOCATOR 418 select SRAM_EXEC if ARM 419 help 420 This driver allows you to declare a memory region to be managed by 421 the genalloc API. It is supposed to be used for small on-chip SRAM 422 areas found on many SoCs. 423 424config SRAM_EXEC 425 bool 426 427config VEXPRESS_SYSCFG 428 bool "Versatile Express System Configuration driver" 429 depends on VEXPRESS_CONFIG 430 default y 431 help 432 ARM Ltd. Versatile Express uses specialised platform configuration 433 bus. System Configuration interface is one of the possible means 434 of generating transactions on this bus. 435 436config PCI_ENDPOINT_TEST 437 depends on PCI 438 select CRC32 439 tristate "PCI Endpoint Test driver" 440 ---help--- 441 Enable this configuration option to enable the host side test driver 442 for PCI Endpoint. 443 444config XILINX_SDFEC 445 tristate "Xilinx SDFEC 16" 446 depends on HAS_IOMEM 447 help 448 This option enables support for the Xilinx SDFEC (Soft Decision 449 Forward Error Correction) driver. This enables a char driver 450 for the SDFEC. 451 452 You may select this driver if your design instantiates the 453 SDFEC(16nm) hardened block. To compile this as a module choose M. 454 455 If unsure, say N. 456 457config MISC_RTSX 458 tristate 459 default MISC_RTSX_PCI || MISC_RTSX_USB 460 461config PVPANIC 462 tristate "pvpanic device support" 463 depends on HAS_IOMEM && (ACPI || OF) 464 help 465 This driver provides support for the pvpanic device. pvpanic is 466 a paravirtualized device provided by QEMU; it lets a virtual machine 467 (guest) communicate panic events to the host. 468 469source "drivers/misc/c2port/Kconfig" 470source "drivers/misc/eeprom/Kconfig" 471source "drivers/misc/cb710/Kconfig" 472source "drivers/misc/ti-st/Kconfig" 473source "drivers/misc/lis3lv02d/Kconfig" 474source "drivers/misc/altera-stapl/Kconfig" 475source "drivers/misc/mei/Kconfig" 476source "drivers/misc/vmw_vmci/Kconfig" 477source "drivers/misc/mic/Kconfig" 478source "drivers/misc/genwqe/Kconfig" 479source "drivers/misc/echo/Kconfig" 480source "drivers/misc/cxl/Kconfig" 481source "drivers/misc/ocxl/Kconfig" 482source "drivers/misc/cardreader/Kconfig" 483source "drivers/misc/habanalabs/Kconfig" 484endmenu 485