1 /* 2 * twl4030-irq.c - TWL4030/TPS659x0 irq support 3 * 4 * Copyright (C) 2005-2006 Texas Instruments, Inc. 5 * 6 * Modifications to defer interrupt handling to a kernel thread: 7 * Copyright (C) 2006 MontaVista Software, Inc. 8 * 9 * Based on tlv320aic23.c: 10 * Copyright (c) by Kai Svahn <kai.svahn@nokia.com> 11 * 12 * Code cleanup and modifications to IRQ handler. 13 * by syed khasim <x0khasim@ti.com> 14 * 15 * This program is free software; you can redistribute it and/or modify 16 * it under the terms of the GNU General Public License as published by 17 * the Free Software Foundation; either version 2 of the License, or 18 * (at your option) any later version. 19 * 20 * This program is distributed in the hope that it will be useful, 21 * but WITHOUT ANY WARRANTY; without even the implied warranty of 22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 23 * GNU General Public License for more details. 24 * 25 * You should have received a copy of the GNU General Public License 26 * along with this program; if not, write to the Free Software 27 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 28 */ 29 30 #include <linux/export.h> 31 #include <linux/interrupt.h> 32 #include <linux/irq.h> 33 #include <linux/slab.h> 34 #include <linux/of.h> 35 #include <linux/irqdomain.h> 36 #include <linux/i2c/twl.h> 37 38 #include "twl-core.h" 39 40 /* 41 * TWL4030 IRQ handling has two stages in hardware, and thus in software. 42 * The Primary Interrupt Handler (PIH) stage exposes status bits saying 43 * which Secondary Interrupt Handler (SIH) stage is raising an interrupt. 44 * SIH modules are more traditional IRQ components, which support per-IRQ 45 * enable/disable and trigger controls; they do most of the work. 46 * 47 * These chips are designed to support IRQ handling from two different 48 * I2C masters. Each has a dedicated IRQ line, and dedicated IRQ status 49 * and mask registers in the PIH and SIH modules. 50 * 51 * We set up IRQs starting at a platform-specified base, always starting 52 * with PIH and the SIH for PWR_INT and then usually adding GPIO: 53 * base + 0 .. base + 7 PIH 54 * base + 8 .. base + 15 SIH for PWR_INT 55 * base + 16 .. base + 33 SIH for GPIO 56 */ 57 #define TWL4030_CORE_NR_IRQS 8 58 #define TWL4030_PWR_NR_IRQS 8 59 60 /* PIH register offsets */ 61 #define REG_PIH_ISR_P1 0x01 62 #define REG_PIH_ISR_P2 0x02 63 #define REG_PIH_SIR 0x03 /* for testing */ 64 65 /* Linux could (eventually) use either IRQ line */ 66 static int irq_line; 67 68 struct sih { 69 char name[8]; 70 u8 module; /* module id */ 71 u8 control_offset; /* for SIH_CTRL */ 72 bool set_cor; 73 74 u8 bits; /* valid in isr/imr */ 75 u8 bytes_ixr; /* bytelen of ISR/IMR/SIR */ 76 77 u8 edr_offset; 78 u8 bytes_edr; /* bytelen of EDR */ 79 80 u8 irq_lines; /* number of supported irq lines */ 81 82 /* SIR ignored -- set interrupt, for testing only */ 83 struct sih_irq_data { 84 u8 isr_offset; 85 u8 imr_offset; 86 } mask[2]; 87 /* + 2 bytes padding */ 88 }; 89 90 static const struct sih *sih_modules; 91 static int nr_sih_modules; 92 93 #define SIH_INITIALIZER(modname, nbits) \ 94 .module = TWL4030_MODULE_ ## modname, \ 95 .control_offset = TWL4030_ ## modname ## _SIH_CTRL, \ 96 .bits = nbits, \ 97 .bytes_ixr = DIV_ROUND_UP(nbits, 8), \ 98 .edr_offset = TWL4030_ ## modname ## _EDR, \ 99 .bytes_edr = DIV_ROUND_UP((2*(nbits)), 8), \ 100 .irq_lines = 2, \ 101 .mask = { { \ 102 .isr_offset = TWL4030_ ## modname ## _ISR1, \ 103 .imr_offset = TWL4030_ ## modname ## _IMR1, \ 104 }, \ 105 { \ 106 .isr_offset = TWL4030_ ## modname ## _ISR2, \ 107 .imr_offset = TWL4030_ ## modname ## _IMR2, \ 108 }, }, 109 110 /* register naming policies are inconsistent ... */ 111 #define TWL4030_INT_PWR_EDR TWL4030_INT_PWR_EDR1 112 #define TWL4030_MODULE_KEYPAD_KEYP TWL4030_MODULE_KEYPAD 113 #define TWL4030_MODULE_INT_PWR TWL4030_MODULE_INT 114 115 116 /* 117 * Order in this table matches order in PIH_ISR. That is, 118 * BIT(n) in PIH_ISR is sih_modules[n]. 119 */ 120 /* sih_modules_twl4030 is used both in twl4030 and twl5030 */ 121 static const struct sih sih_modules_twl4030[6] = { 122 [0] = { 123 .name = "gpio", 124 .module = TWL4030_MODULE_GPIO, 125 .control_offset = REG_GPIO_SIH_CTRL, 126 .set_cor = true, 127 .bits = TWL4030_GPIO_MAX, 128 .bytes_ixr = 3, 129 /* Note: *all* of these IRQs default to no-trigger */ 130 .edr_offset = REG_GPIO_EDR1, 131 .bytes_edr = 5, 132 .irq_lines = 2, 133 .mask = { { 134 .isr_offset = REG_GPIO_ISR1A, 135 .imr_offset = REG_GPIO_IMR1A, 136 }, { 137 .isr_offset = REG_GPIO_ISR1B, 138 .imr_offset = REG_GPIO_IMR1B, 139 }, }, 140 }, 141 [1] = { 142 .name = "keypad", 143 .set_cor = true, 144 SIH_INITIALIZER(KEYPAD_KEYP, 4) 145 }, 146 [2] = { 147 .name = "bci", 148 .module = TWL4030_MODULE_INTERRUPTS, 149 .control_offset = TWL4030_INTERRUPTS_BCISIHCTRL, 150 .set_cor = true, 151 .bits = 12, 152 .bytes_ixr = 2, 153 .edr_offset = TWL4030_INTERRUPTS_BCIEDR1, 154 /* Note: most of these IRQs default to no-trigger */ 155 .bytes_edr = 3, 156 .irq_lines = 2, 157 .mask = { { 158 .isr_offset = TWL4030_INTERRUPTS_BCIISR1A, 159 .imr_offset = TWL4030_INTERRUPTS_BCIIMR1A, 160 }, { 161 .isr_offset = TWL4030_INTERRUPTS_BCIISR1B, 162 .imr_offset = TWL4030_INTERRUPTS_BCIIMR1B, 163 }, }, 164 }, 165 [3] = { 166 .name = "madc", 167 SIH_INITIALIZER(MADC, 4) 168 }, 169 [4] = { 170 /* USB doesn't use the same SIH organization */ 171 .name = "usb", 172 }, 173 [5] = { 174 .name = "power", 175 .set_cor = true, 176 SIH_INITIALIZER(INT_PWR, 8) 177 }, 178 /* there are no SIH modules #6 or #7 ... */ 179 }; 180 181 static const struct sih sih_modules_twl5031[8] = { 182 [0] = { 183 .name = "gpio", 184 .module = TWL4030_MODULE_GPIO, 185 .control_offset = REG_GPIO_SIH_CTRL, 186 .set_cor = true, 187 .bits = TWL4030_GPIO_MAX, 188 .bytes_ixr = 3, 189 /* Note: *all* of these IRQs default to no-trigger */ 190 .edr_offset = REG_GPIO_EDR1, 191 .bytes_edr = 5, 192 .irq_lines = 2, 193 .mask = { { 194 .isr_offset = REG_GPIO_ISR1A, 195 .imr_offset = REG_GPIO_IMR1A, 196 }, { 197 .isr_offset = REG_GPIO_ISR1B, 198 .imr_offset = REG_GPIO_IMR1B, 199 }, }, 200 }, 201 [1] = { 202 .name = "keypad", 203 .set_cor = true, 204 SIH_INITIALIZER(KEYPAD_KEYP, 4) 205 }, 206 [2] = { 207 .name = "bci", 208 .module = TWL5031_MODULE_INTERRUPTS, 209 .control_offset = TWL5031_INTERRUPTS_BCISIHCTRL, 210 .bits = 7, 211 .bytes_ixr = 1, 212 .edr_offset = TWL5031_INTERRUPTS_BCIEDR1, 213 /* Note: most of these IRQs default to no-trigger */ 214 .bytes_edr = 2, 215 .irq_lines = 2, 216 .mask = { { 217 .isr_offset = TWL5031_INTERRUPTS_BCIISR1, 218 .imr_offset = TWL5031_INTERRUPTS_BCIIMR1, 219 }, { 220 .isr_offset = TWL5031_INTERRUPTS_BCIISR2, 221 .imr_offset = TWL5031_INTERRUPTS_BCIIMR2, 222 }, }, 223 }, 224 [3] = { 225 .name = "madc", 226 SIH_INITIALIZER(MADC, 4) 227 }, 228 [4] = { 229 /* USB doesn't use the same SIH organization */ 230 .name = "usb", 231 }, 232 [5] = { 233 .name = "power", 234 .set_cor = true, 235 SIH_INITIALIZER(INT_PWR, 8) 236 }, 237 [6] = { 238 /* 239 * ECI/DBI doesn't use the same SIH organization. 240 * For example, it supports only one interrupt output line. 241 * That is, the interrupts are seen on both INT1 and INT2 lines. 242 */ 243 .name = "eci_dbi", 244 .module = TWL5031_MODULE_ACCESSORY, 245 .bits = 9, 246 .bytes_ixr = 2, 247 .irq_lines = 1, 248 .mask = { { 249 .isr_offset = TWL5031_ACIIDR_LSB, 250 .imr_offset = TWL5031_ACIIMR_LSB, 251 }, }, 252 253 }, 254 [7] = { 255 /* Audio accessory */ 256 .name = "audio", 257 .module = TWL5031_MODULE_ACCESSORY, 258 .control_offset = TWL5031_ACCSIHCTRL, 259 .bits = 2, 260 .bytes_ixr = 1, 261 .edr_offset = TWL5031_ACCEDR1, 262 /* Note: most of these IRQs default to no-trigger */ 263 .bytes_edr = 1, 264 .irq_lines = 2, 265 .mask = { { 266 .isr_offset = TWL5031_ACCISR1, 267 .imr_offset = TWL5031_ACCIMR1, 268 }, { 269 .isr_offset = TWL5031_ACCISR2, 270 .imr_offset = TWL5031_ACCIMR2, 271 }, }, 272 }, 273 }; 274 275 #undef TWL4030_MODULE_KEYPAD_KEYP 276 #undef TWL4030_MODULE_INT_PWR 277 #undef TWL4030_INT_PWR_EDR 278 279 /*----------------------------------------------------------------------*/ 280 281 static unsigned twl4030_irq_base; 282 283 /* 284 * handle_twl4030_pih() is the desc->handle method for the twl4030 interrupt. 285 * This is a chained interrupt, so there is no desc->action method for it. 286 * Now we need to query the interrupt controller in the twl4030 to determine 287 * which module is generating the interrupt request. However, we can't do i2c 288 * transactions in interrupt context, so we must defer that work to a kernel 289 * thread. All we do here is acknowledge and mask the interrupt and wakeup 290 * the kernel thread. 291 */ 292 static irqreturn_t handle_twl4030_pih(int irq, void *devid) 293 { 294 irqreturn_t ret; 295 u8 pih_isr; 296 297 ret = twl_i2c_read_u8(TWL_MODULE_PIH, &pih_isr, 298 REG_PIH_ISR_P1); 299 if (ret) { 300 pr_warn("twl4030: I2C error %d reading PIH ISR\n", ret); 301 return IRQ_NONE; 302 } 303 304 while (pih_isr) { 305 unsigned long pending = __ffs(pih_isr); 306 unsigned int irq; 307 308 pih_isr &= ~BIT(pending); 309 irq = pending + twl4030_irq_base; 310 handle_nested_irq(irq); 311 } 312 313 return IRQ_HANDLED; 314 } 315 316 /*----------------------------------------------------------------------*/ 317 318 /* 319 * twl4030_init_sih_modules() ... start from a known state where no 320 * IRQs will be coming in, and where we can quickly enable them then 321 * handle them as they arrive. Mask all IRQs: maybe init SIH_CTRL. 322 * 323 * NOTE: we don't touch EDR registers here; they stay with hardware 324 * defaults or whatever the last value was. Note that when both EDR 325 * bits for an IRQ are clear, that's as if its IMR bit is set... 326 */ 327 static int twl4030_init_sih_modules(unsigned line) 328 { 329 const struct sih *sih; 330 u8 buf[4]; 331 int i; 332 int status; 333 334 /* line 0 == int1_n signal; line 1 == int2_n signal */ 335 if (line > 1) 336 return -EINVAL; 337 338 irq_line = line; 339 340 /* disable all interrupts on our line */ 341 memset(buf, 0xff, sizeof(buf)); 342 sih = sih_modules; 343 for (i = 0; i < nr_sih_modules; i++, sih++) { 344 /* skip USB -- it's funky */ 345 if (!sih->bytes_ixr) 346 continue; 347 348 /* Not all the SIH modules support multiple interrupt lines */ 349 if (sih->irq_lines <= line) 350 continue; 351 352 status = twl_i2c_write(sih->module, buf, 353 sih->mask[line].imr_offset, sih->bytes_ixr); 354 if (status < 0) 355 pr_err("twl4030: err %d initializing %s %s\n", 356 status, sih->name, "IMR"); 357 358 /* 359 * Maybe disable "exclusive" mode; buffer second pending irq; 360 * set Clear-On-Read (COR) bit. 361 * 362 * NOTE that sometimes COR polarity is documented as being 363 * inverted: for MADC, COR=1 means "clear on write". 364 * And for PWR_INT it's not documented... 365 */ 366 if (sih->set_cor) { 367 status = twl_i2c_write_u8(sih->module, 368 TWL4030_SIH_CTRL_COR_MASK, 369 sih->control_offset); 370 if (status < 0) 371 pr_err("twl4030: err %d initializing %s %s\n", 372 status, sih->name, "SIH_CTRL"); 373 } 374 } 375 376 sih = sih_modules; 377 for (i = 0; i < nr_sih_modules; i++, sih++) { 378 u8 rxbuf[4]; 379 int j; 380 381 /* skip USB */ 382 if (!sih->bytes_ixr) 383 continue; 384 385 /* Not all the SIH modules support multiple interrupt lines */ 386 if (sih->irq_lines <= line) 387 continue; 388 389 /* 390 * Clear pending interrupt status. Either the read was 391 * enough, or we need to write those bits. Repeat, in 392 * case an IRQ is pending (PENDDIS=0) ... that's not 393 * uncommon with PWR_INT.PWRON. 394 */ 395 for (j = 0; j < 2; j++) { 396 status = twl_i2c_read(sih->module, rxbuf, 397 sih->mask[line].isr_offset, sih->bytes_ixr); 398 if (status < 0) 399 pr_warn("twl4030: err %d initializing %s %s\n", 400 status, sih->name, "ISR"); 401 402 if (!sih->set_cor) { 403 status = twl_i2c_write(sih->module, buf, 404 sih->mask[line].isr_offset, 405 sih->bytes_ixr); 406 if (status < 0) 407 pr_warn("twl4030: write failed: %d\n", 408 status); 409 } 410 /* 411 * else COR=1 means read sufficed. 412 * (for most SIH modules...) 413 */ 414 } 415 } 416 417 return 0; 418 } 419 420 static inline void activate_irq(int irq) 421 { 422 irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE); 423 } 424 425 /*----------------------------------------------------------------------*/ 426 427 struct sih_agent { 428 int irq_base; 429 const struct sih *sih; 430 431 u32 imr; 432 bool imr_change_pending; 433 434 u32 edge_change; 435 436 struct mutex irq_lock; 437 char *irq_name; 438 }; 439 440 /*----------------------------------------------------------------------*/ 441 442 /* 443 * All irq_chip methods get issued from code holding irq_desc[irq].lock, 444 * which can't perform the underlying I2C operations (because they sleep). 445 * So we must hand them off to a thread (workqueue) and cope with asynch 446 * completion, potentially including some re-ordering, of these requests. 447 */ 448 449 static void twl4030_sih_mask(struct irq_data *data) 450 { 451 struct sih_agent *agent = irq_data_get_irq_chip_data(data); 452 453 agent->imr |= BIT(data->irq - agent->irq_base); 454 agent->imr_change_pending = true; 455 } 456 457 static void twl4030_sih_unmask(struct irq_data *data) 458 { 459 struct sih_agent *agent = irq_data_get_irq_chip_data(data); 460 461 agent->imr &= ~BIT(data->irq - agent->irq_base); 462 agent->imr_change_pending = true; 463 } 464 465 static int twl4030_sih_set_type(struct irq_data *data, unsigned trigger) 466 { 467 struct sih_agent *agent = irq_data_get_irq_chip_data(data); 468 469 if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) 470 return -EINVAL; 471 472 if (irqd_get_trigger_type(data) != trigger) 473 agent->edge_change |= BIT(data->irq - agent->irq_base); 474 475 return 0; 476 } 477 478 static void twl4030_sih_bus_lock(struct irq_data *data) 479 { 480 struct sih_agent *agent = irq_data_get_irq_chip_data(data); 481 482 mutex_lock(&agent->irq_lock); 483 } 484 485 static void twl4030_sih_bus_sync_unlock(struct irq_data *data) 486 { 487 struct sih_agent *agent = irq_data_get_irq_chip_data(data); 488 const struct sih *sih = agent->sih; 489 int status; 490 491 if (agent->imr_change_pending) { 492 union { 493 u32 word; 494 u8 bytes[4]; 495 } imr; 496 497 /* byte[0] gets overwritten as we write ... */ 498 imr.word = cpu_to_le32(agent->imr); 499 agent->imr_change_pending = false; 500 501 /* write the whole mask ... simpler than subsetting it */ 502 status = twl_i2c_write(sih->module, imr.bytes, 503 sih->mask[irq_line].imr_offset, 504 sih->bytes_ixr); 505 if (status) 506 pr_err("twl4030: %s, %s --> %d\n", __func__, 507 "write", status); 508 } 509 510 if (agent->edge_change) { 511 u32 edge_change; 512 u8 bytes[6]; 513 514 edge_change = agent->edge_change; 515 agent->edge_change = 0; 516 517 /* 518 * Read, reserving first byte for write scratch. Yes, this 519 * could be cached for some speedup ... but be careful about 520 * any processor on the other IRQ line, EDR registers are 521 * shared. 522 */ 523 status = twl_i2c_read(sih->module, bytes, 524 sih->edr_offset, sih->bytes_edr); 525 if (status) { 526 pr_err("twl4030: %s, %s --> %d\n", __func__, 527 "read", status); 528 return; 529 } 530 531 /* Modify only the bits we know must change */ 532 while (edge_change) { 533 int i = fls(edge_change) - 1; 534 int byte = i >> 2; 535 int off = (i & 0x3) * 2; 536 unsigned int type; 537 538 bytes[byte] &= ~(0x03 << off); 539 540 type = irq_get_trigger_type(i + agent->irq_base); 541 if (type & IRQ_TYPE_EDGE_RISING) 542 bytes[byte] |= BIT(off + 1); 543 if (type & IRQ_TYPE_EDGE_FALLING) 544 bytes[byte] |= BIT(off + 0); 545 546 edge_change &= ~BIT(i); 547 } 548 549 /* Write */ 550 status = twl_i2c_write(sih->module, bytes, 551 sih->edr_offset, sih->bytes_edr); 552 if (status) 553 pr_err("twl4030: %s, %s --> %d\n", __func__, 554 "write", status); 555 } 556 557 mutex_unlock(&agent->irq_lock); 558 } 559 560 static struct irq_chip twl4030_sih_irq_chip = { 561 .name = "twl4030", 562 .irq_mask = twl4030_sih_mask, 563 .irq_unmask = twl4030_sih_unmask, 564 .irq_set_type = twl4030_sih_set_type, 565 .irq_bus_lock = twl4030_sih_bus_lock, 566 .irq_bus_sync_unlock = twl4030_sih_bus_sync_unlock, 567 .flags = IRQCHIP_SKIP_SET_WAKE, 568 }; 569 570 /*----------------------------------------------------------------------*/ 571 572 static inline int sih_read_isr(const struct sih *sih) 573 { 574 int status; 575 union { 576 u8 bytes[4]; 577 u32 word; 578 } isr; 579 580 /* FIXME need retry-on-error ... */ 581 582 isr.word = 0; 583 status = twl_i2c_read(sih->module, isr.bytes, 584 sih->mask[irq_line].isr_offset, sih->bytes_ixr); 585 586 return (status < 0) ? status : le32_to_cpu(isr.word); 587 } 588 589 /* 590 * Generic handler for SIH interrupts ... we "know" this is called 591 * in task context, with IRQs enabled. 592 */ 593 static irqreturn_t handle_twl4030_sih(int irq, void *data) 594 { 595 struct sih_agent *agent = irq_get_handler_data(irq); 596 const struct sih *sih = agent->sih; 597 int isr; 598 599 /* reading ISR acks the IRQs, using clear-on-read mode */ 600 isr = sih_read_isr(sih); 601 602 if (isr < 0) { 603 pr_err("twl4030: %s SIH, read ISR error %d\n", 604 sih->name, isr); 605 /* REVISIT: recover; eventually mask it all, etc */ 606 return IRQ_HANDLED; 607 } 608 609 while (isr) { 610 irq = fls(isr); 611 irq--; 612 isr &= ~BIT(irq); 613 614 if (irq < sih->bits) 615 handle_nested_irq(agent->irq_base + irq); 616 else 617 pr_err("twl4030: %s SIH, invalid ISR bit %d\n", 618 sih->name, irq); 619 } 620 return IRQ_HANDLED; 621 } 622 623 /* returns the first IRQ used by this SIH bank, or negative errno */ 624 int twl4030_sih_setup(struct device *dev, int module, int irq_base) 625 { 626 int sih_mod; 627 const struct sih *sih = NULL; 628 struct sih_agent *agent; 629 int i, irq; 630 int status = -EINVAL; 631 632 /* only support modules with standard clear-on-read for now */ 633 for (sih_mod = 0, sih = sih_modules; sih_mod < nr_sih_modules; 634 sih_mod++, sih++) { 635 if (sih->module == module && sih->set_cor) { 636 status = 0; 637 break; 638 } 639 } 640 641 if (status < 0) 642 return status; 643 644 agent = kzalloc(sizeof(*agent), GFP_KERNEL); 645 if (!agent) 646 return -ENOMEM; 647 648 agent->irq_base = irq_base; 649 agent->sih = sih; 650 agent->imr = ~0; 651 mutex_init(&agent->irq_lock); 652 653 for (i = 0; i < sih->bits; i++) { 654 irq = irq_base + i; 655 656 irq_set_chip_data(irq, agent); 657 irq_set_chip_and_handler(irq, &twl4030_sih_irq_chip, 658 handle_edge_irq); 659 irq_set_nested_thread(irq, 1); 660 activate_irq(irq); 661 } 662 663 /* replace generic PIH handler (handle_simple_irq) */ 664 irq = sih_mod + twl4030_irq_base; 665 irq_set_handler_data(irq, agent); 666 agent->irq_name = kasprintf(GFP_KERNEL, "twl4030_%s", sih->name); 667 status = request_threaded_irq(irq, NULL, handle_twl4030_sih, 668 IRQF_EARLY_RESUME | IRQF_ONESHOT, 669 agent->irq_name ?: sih->name, NULL); 670 671 dev_info(dev, "%s (irq %d) chaining IRQs %d..%d\n", sih->name, 672 irq, irq_base, irq_base + i - 1); 673 674 return status < 0 ? status : irq_base; 675 } 676 677 /* FIXME need a call to reverse twl4030_sih_setup() ... */ 678 679 /*----------------------------------------------------------------------*/ 680 681 /* FIXME pass in which interrupt line we'll use ... */ 682 #define twl_irq_line 0 683 684 int twl4030_init_irq(struct device *dev, int irq_num) 685 { 686 static struct irq_chip twl4030_irq_chip; 687 int status, i; 688 int irq_base, irq_end, nr_irqs; 689 struct device_node *node = dev->of_node; 690 691 /* 692 * TWL core and pwr interrupts must be contiguous because 693 * the hwirqs numbers are defined contiguously from 1 to 15. 694 * Create only one domain for both. 695 */ 696 nr_irqs = TWL4030_PWR_NR_IRQS + TWL4030_CORE_NR_IRQS; 697 698 irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0); 699 if (IS_ERR_VALUE(irq_base)) { 700 dev_err(dev, "Fail to allocate IRQ descs\n"); 701 return irq_base; 702 } 703 704 irq_domain_add_legacy(node, nr_irqs, irq_base, 0, 705 &irq_domain_simple_ops, NULL); 706 707 irq_end = irq_base + TWL4030_CORE_NR_IRQS; 708 709 /* 710 * Mask and clear all TWL4030 interrupts since initially we do 711 * not have any TWL4030 module interrupt handlers present 712 */ 713 status = twl4030_init_sih_modules(twl_irq_line); 714 if (status < 0) 715 return status; 716 717 twl4030_irq_base = irq_base; 718 719 /* 720 * Install an irq handler for each of the SIH modules; 721 * clone dummy irq_chip since PIH can't *do* anything 722 */ 723 twl4030_irq_chip = dummy_irq_chip; 724 twl4030_irq_chip.name = "twl4030"; 725 726 twl4030_sih_irq_chip.irq_ack = dummy_irq_chip.irq_ack; 727 728 for (i = irq_base; i < irq_end; i++) { 729 irq_set_chip_and_handler(i, &twl4030_irq_chip, 730 handle_simple_irq); 731 irq_set_nested_thread(i, 1); 732 activate_irq(i); 733 } 734 735 dev_info(dev, "%s (irq %d) chaining IRQs %d..%d\n", "PIH", 736 irq_num, irq_base, irq_end); 737 738 /* ... and the PWR_INT module ... */ 739 status = twl4030_sih_setup(dev, TWL4030_MODULE_INT, irq_end); 740 if (status < 0) { 741 dev_err(dev, "sih_setup PWR INT --> %d\n", status); 742 goto fail; 743 } 744 745 /* install an irq handler to demultiplex the TWL4030 interrupt */ 746 status = request_threaded_irq(irq_num, NULL, handle_twl4030_pih, 747 IRQF_ONESHOT, 748 "TWL4030-PIH", NULL); 749 if (status < 0) { 750 dev_err(dev, "could not claim irq%d: %d\n", irq_num, status); 751 goto fail_rqirq; 752 } 753 enable_irq_wake(irq_num); 754 755 return irq_base; 756 fail_rqirq: 757 /* clean up twl4030_sih_setup */ 758 fail: 759 for (i = irq_base; i < irq_end; i++) { 760 irq_set_nested_thread(i, 0); 761 irq_set_chip_and_handler(i, NULL, NULL); 762 } 763 764 return status; 765 } 766 767 int twl4030_exit_irq(void) 768 { 769 /* FIXME undo twl_init_irq() */ 770 if (twl4030_irq_base) { 771 pr_err("twl4030: can't yet clean up IRQs?\n"); 772 return -ENOSYS; 773 } 774 return 0; 775 } 776 777 int twl4030_init_chip_irq(const char *chip) 778 { 779 if (!strcmp(chip, "twl5031")) { 780 sih_modules = sih_modules_twl5031; 781 nr_sih_modules = ARRAY_SIZE(sih_modules_twl5031); 782 } else { 783 sih_modules = sih_modules_twl4030; 784 nr_sih_modules = ARRAY_SIZE(sih_modules_twl4030); 785 } 786 787 return 0; 788 } 789