1 /* 2 * twl4030-irq.c - TWL4030/TPS659x0 irq support 3 * 4 * Copyright (C) 2005-2006 Texas Instruments, Inc. 5 * 6 * Modifications to defer interrupt handling to a kernel thread: 7 * Copyright (C) 2006 MontaVista Software, Inc. 8 * 9 * Based on tlv320aic23.c: 10 * Copyright (c) by Kai Svahn <kai.svahn@nokia.com> 11 * 12 * Code cleanup and modifications to IRQ handler. 13 * by syed khasim <x0khasim@ti.com> 14 * 15 * This program is free software; you can redistribute it and/or modify 16 * it under the terms of the GNU General Public License as published by 17 * the Free Software Foundation; either version 2 of the License, or 18 * (at your option) any later version. 19 * 20 * This program is distributed in the hope that it will be useful, 21 * but WITHOUT ANY WARRANTY; without even the implied warranty of 22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 23 * GNU General Public License for more details. 24 * 25 * You should have received a copy of the GNU General Public License 26 * along with this program; if not, write to the Free Software 27 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 28 */ 29 30 #include <linux/init.h> 31 #include <linux/export.h> 32 #include <linux/interrupt.h> 33 #include <linux/irq.h> 34 #include <linux/slab.h> 35 #include <linux/of.h> 36 #include <linux/irqdomain.h> 37 #include <linux/i2c/twl.h> 38 39 #include "twl-core.h" 40 41 /* 42 * TWL4030 IRQ handling has two stages in hardware, and thus in software. 43 * The Primary Interrupt Handler (PIH) stage exposes status bits saying 44 * which Secondary Interrupt Handler (SIH) stage is raising an interrupt. 45 * SIH modules are more traditional IRQ components, which support per-IRQ 46 * enable/disable and trigger controls; they do most of the work. 47 * 48 * These chips are designed to support IRQ handling from two different 49 * I2C masters. Each has a dedicated IRQ line, and dedicated IRQ status 50 * and mask registers in the PIH and SIH modules. 51 * 52 * We set up IRQs starting at a platform-specified base, always starting 53 * with PIH and the SIH for PWR_INT and then usually adding GPIO: 54 * base + 0 .. base + 7 PIH 55 * base + 8 .. base + 15 SIH for PWR_INT 56 * base + 16 .. base + 33 SIH for GPIO 57 */ 58 #define TWL4030_CORE_NR_IRQS 8 59 #define TWL4030_PWR_NR_IRQS 8 60 61 /* PIH register offsets */ 62 #define REG_PIH_ISR_P1 0x01 63 #define REG_PIH_ISR_P2 0x02 64 #define REG_PIH_SIR 0x03 /* for testing */ 65 66 /* Linux could (eventually) use either IRQ line */ 67 static int irq_line; 68 69 struct sih { 70 char name[8]; 71 u8 module; /* module id */ 72 u8 control_offset; /* for SIH_CTRL */ 73 bool set_cor; 74 75 u8 bits; /* valid in isr/imr */ 76 u8 bytes_ixr; /* bytelen of ISR/IMR/SIR */ 77 78 u8 edr_offset; 79 u8 bytes_edr; /* bytelen of EDR */ 80 81 u8 irq_lines; /* number of supported irq lines */ 82 83 /* SIR ignored -- set interrupt, for testing only */ 84 struct sih_irq_data { 85 u8 isr_offset; 86 u8 imr_offset; 87 } mask[2]; 88 /* + 2 bytes padding */ 89 }; 90 91 static const struct sih *sih_modules; 92 static int nr_sih_modules; 93 94 #define SIH_INITIALIZER(modname, nbits) \ 95 .module = TWL4030_MODULE_ ## modname, \ 96 .control_offset = TWL4030_ ## modname ## _SIH_CTRL, \ 97 .bits = nbits, \ 98 .bytes_ixr = DIV_ROUND_UP(nbits, 8), \ 99 .edr_offset = TWL4030_ ## modname ## _EDR, \ 100 .bytes_edr = DIV_ROUND_UP((2*(nbits)), 8), \ 101 .irq_lines = 2, \ 102 .mask = { { \ 103 .isr_offset = TWL4030_ ## modname ## _ISR1, \ 104 .imr_offset = TWL4030_ ## modname ## _IMR1, \ 105 }, \ 106 { \ 107 .isr_offset = TWL4030_ ## modname ## _ISR2, \ 108 .imr_offset = TWL4030_ ## modname ## _IMR2, \ 109 }, }, 110 111 /* register naming policies are inconsistent ... */ 112 #define TWL4030_INT_PWR_EDR TWL4030_INT_PWR_EDR1 113 #define TWL4030_MODULE_KEYPAD_KEYP TWL4030_MODULE_KEYPAD 114 #define TWL4030_MODULE_INT_PWR TWL4030_MODULE_INT 115 116 117 /* 118 * Order in this table matches order in PIH_ISR. That is, 119 * BIT(n) in PIH_ISR is sih_modules[n]. 120 */ 121 /* sih_modules_twl4030 is used both in twl4030 and twl5030 */ 122 static const struct sih sih_modules_twl4030[6] = { 123 [0] = { 124 .name = "gpio", 125 .module = TWL4030_MODULE_GPIO, 126 .control_offset = REG_GPIO_SIH_CTRL, 127 .set_cor = true, 128 .bits = TWL4030_GPIO_MAX, 129 .bytes_ixr = 3, 130 /* Note: *all* of these IRQs default to no-trigger */ 131 .edr_offset = REG_GPIO_EDR1, 132 .bytes_edr = 5, 133 .irq_lines = 2, 134 .mask = { { 135 .isr_offset = REG_GPIO_ISR1A, 136 .imr_offset = REG_GPIO_IMR1A, 137 }, { 138 .isr_offset = REG_GPIO_ISR1B, 139 .imr_offset = REG_GPIO_IMR1B, 140 }, }, 141 }, 142 [1] = { 143 .name = "keypad", 144 .set_cor = true, 145 SIH_INITIALIZER(KEYPAD_KEYP, 4) 146 }, 147 [2] = { 148 .name = "bci", 149 .module = TWL4030_MODULE_INTERRUPTS, 150 .control_offset = TWL4030_INTERRUPTS_BCISIHCTRL, 151 .set_cor = true, 152 .bits = 12, 153 .bytes_ixr = 2, 154 .edr_offset = TWL4030_INTERRUPTS_BCIEDR1, 155 /* Note: most of these IRQs default to no-trigger */ 156 .bytes_edr = 3, 157 .irq_lines = 2, 158 .mask = { { 159 .isr_offset = TWL4030_INTERRUPTS_BCIISR1A, 160 .imr_offset = TWL4030_INTERRUPTS_BCIIMR1A, 161 }, { 162 .isr_offset = TWL4030_INTERRUPTS_BCIISR1B, 163 .imr_offset = TWL4030_INTERRUPTS_BCIIMR1B, 164 }, }, 165 }, 166 [3] = { 167 .name = "madc", 168 SIH_INITIALIZER(MADC, 4) 169 }, 170 [4] = { 171 /* USB doesn't use the same SIH organization */ 172 .name = "usb", 173 }, 174 [5] = { 175 .name = "power", 176 .set_cor = true, 177 SIH_INITIALIZER(INT_PWR, 8) 178 }, 179 /* there are no SIH modules #6 or #7 ... */ 180 }; 181 182 static const struct sih sih_modules_twl5031[8] = { 183 [0] = { 184 .name = "gpio", 185 .module = TWL4030_MODULE_GPIO, 186 .control_offset = REG_GPIO_SIH_CTRL, 187 .set_cor = true, 188 .bits = TWL4030_GPIO_MAX, 189 .bytes_ixr = 3, 190 /* Note: *all* of these IRQs default to no-trigger */ 191 .edr_offset = REG_GPIO_EDR1, 192 .bytes_edr = 5, 193 .irq_lines = 2, 194 .mask = { { 195 .isr_offset = REG_GPIO_ISR1A, 196 .imr_offset = REG_GPIO_IMR1A, 197 }, { 198 .isr_offset = REG_GPIO_ISR1B, 199 .imr_offset = REG_GPIO_IMR1B, 200 }, }, 201 }, 202 [1] = { 203 .name = "keypad", 204 .set_cor = true, 205 SIH_INITIALIZER(KEYPAD_KEYP, 4) 206 }, 207 [2] = { 208 .name = "bci", 209 .module = TWL5031_MODULE_INTERRUPTS, 210 .control_offset = TWL5031_INTERRUPTS_BCISIHCTRL, 211 .bits = 7, 212 .bytes_ixr = 1, 213 .edr_offset = TWL5031_INTERRUPTS_BCIEDR1, 214 /* Note: most of these IRQs default to no-trigger */ 215 .bytes_edr = 2, 216 .irq_lines = 2, 217 .mask = { { 218 .isr_offset = TWL5031_INTERRUPTS_BCIISR1, 219 .imr_offset = TWL5031_INTERRUPTS_BCIIMR1, 220 }, { 221 .isr_offset = TWL5031_INTERRUPTS_BCIISR2, 222 .imr_offset = TWL5031_INTERRUPTS_BCIIMR2, 223 }, }, 224 }, 225 [3] = { 226 .name = "madc", 227 SIH_INITIALIZER(MADC, 4) 228 }, 229 [4] = { 230 /* USB doesn't use the same SIH organization */ 231 .name = "usb", 232 }, 233 [5] = { 234 .name = "power", 235 .set_cor = true, 236 SIH_INITIALIZER(INT_PWR, 8) 237 }, 238 [6] = { 239 /* 240 * ECI/DBI doesn't use the same SIH organization. 241 * For example, it supports only one interrupt output line. 242 * That is, the interrupts are seen on both INT1 and INT2 lines. 243 */ 244 .name = "eci_dbi", 245 .module = TWL5031_MODULE_ACCESSORY, 246 .bits = 9, 247 .bytes_ixr = 2, 248 .irq_lines = 1, 249 .mask = { { 250 .isr_offset = TWL5031_ACIIDR_LSB, 251 .imr_offset = TWL5031_ACIIMR_LSB, 252 }, }, 253 254 }, 255 [7] = { 256 /* Audio accessory */ 257 .name = "audio", 258 .module = TWL5031_MODULE_ACCESSORY, 259 .control_offset = TWL5031_ACCSIHCTRL, 260 .bits = 2, 261 .bytes_ixr = 1, 262 .edr_offset = TWL5031_ACCEDR1, 263 /* Note: most of these IRQs default to no-trigger */ 264 .bytes_edr = 1, 265 .irq_lines = 2, 266 .mask = { { 267 .isr_offset = TWL5031_ACCISR1, 268 .imr_offset = TWL5031_ACCIMR1, 269 }, { 270 .isr_offset = TWL5031_ACCISR2, 271 .imr_offset = TWL5031_ACCIMR2, 272 }, }, 273 }, 274 }; 275 276 #undef TWL4030_MODULE_KEYPAD_KEYP 277 #undef TWL4030_MODULE_INT_PWR 278 #undef TWL4030_INT_PWR_EDR 279 280 /*----------------------------------------------------------------------*/ 281 282 static unsigned twl4030_irq_base; 283 284 /* 285 * handle_twl4030_pih() is the desc->handle method for the twl4030 interrupt. 286 * This is a chained interrupt, so there is no desc->action method for it. 287 * Now we need to query the interrupt controller in the twl4030 to determine 288 * which module is generating the interrupt request. However, we can't do i2c 289 * transactions in interrupt context, so we must defer that work to a kernel 290 * thread. All we do here is acknowledge and mask the interrupt and wakeup 291 * the kernel thread. 292 */ 293 static irqreturn_t handle_twl4030_pih(int irq, void *devid) 294 { 295 irqreturn_t ret; 296 u8 pih_isr; 297 298 ret = twl_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr, 299 REG_PIH_ISR_P1); 300 if (ret) { 301 pr_warning("twl4030: I2C error %d reading PIH ISR\n", ret); 302 return IRQ_NONE; 303 } 304 305 while (pih_isr) { 306 unsigned long pending = __ffs(pih_isr); 307 unsigned int irq; 308 309 pih_isr &= ~BIT(pending); 310 irq = pending + twl4030_irq_base; 311 handle_nested_irq(irq); 312 } 313 314 return IRQ_HANDLED; 315 } 316 317 /*----------------------------------------------------------------------*/ 318 319 /* 320 * twl4030_init_sih_modules() ... start from a known state where no 321 * IRQs will be coming in, and where we can quickly enable them then 322 * handle them as they arrive. Mask all IRQs: maybe init SIH_CTRL. 323 * 324 * NOTE: we don't touch EDR registers here; they stay with hardware 325 * defaults or whatever the last value was. Note that when both EDR 326 * bits for an IRQ are clear, that's as if its IMR bit is set... 327 */ 328 static int twl4030_init_sih_modules(unsigned line) 329 { 330 const struct sih *sih; 331 u8 buf[4]; 332 int i; 333 int status; 334 335 /* line 0 == int1_n signal; line 1 == int2_n signal */ 336 if (line > 1) 337 return -EINVAL; 338 339 irq_line = line; 340 341 /* disable all interrupts on our line */ 342 memset(buf, 0xff, sizeof buf); 343 sih = sih_modules; 344 for (i = 0; i < nr_sih_modules; i++, sih++) { 345 /* skip USB -- it's funky */ 346 if (!sih->bytes_ixr) 347 continue; 348 349 /* Not all the SIH modules support multiple interrupt lines */ 350 if (sih->irq_lines <= line) 351 continue; 352 353 status = twl_i2c_write(sih->module, buf, 354 sih->mask[line].imr_offset, sih->bytes_ixr); 355 if (status < 0) 356 pr_err("twl4030: err %d initializing %s %s\n", 357 status, sih->name, "IMR"); 358 359 /* 360 * Maybe disable "exclusive" mode; buffer second pending irq; 361 * set Clear-On-Read (COR) bit. 362 * 363 * NOTE that sometimes COR polarity is documented as being 364 * inverted: for MADC, COR=1 means "clear on write". 365 * And for PWR_INT it's not documented... 366 */ 367 if (sih->set_cor) { 368 status = twl_i2c_write_u8(sih->module, 369 TWL4030_SIH_CTRL_COR_MASK, 370 sih->control_offset); 371 if (status < 0) 372 pr_err("twl4030: err %d initializing %s %s\n", 373 status, sih->name, "SIH_CTRL"); 374 } 375 } 376 377 sih = sih_modules; 378 for (i = 0; i < nr_sih_modules; i++, sih++) { 379 u8 rxbuf[4]; 380 int j; 381 382 /* skip USB */ 383 if (!sih->bytes_ixr) 384 continue; 385 386 /* Not all the SIH modules support multiple interrupt lines */ 387 if (sih->irq_lines <= line) 388 continue; 389 390 /* 391 * Clear pending interrupt status. Either the read was 392 * enough, or we need to write those bits. Repeat, in 393 * case an IRQ is pending (PENDDIS=0) ... that's not 394 * uncommon with PWR_INT.PWRON. 395 */ 396 for (j = 0; j < 2; j++) { 397 status = twl_i2c_read(sih->module, rxbuf, 398 sih->mask[line].isr_offset, sih->bytes_ixr); 399 if (status < 0) 400 pr_err("twl4030: err %d initializing %s %s\n", 401 status, sih->name, "ISR"); 402 403 if (!sih->set_cor) 404 status = twl_i2c_write(sih->module, buf, 405 sih->mask[line].isr_offset, 406 sih->bytes_ixr); 407 /* 408 * else COR=1 means read sufficed. 409 * (for most SIH modules...) 410 */ 411 } 412 } 413 414 return 0; 415 } 416 417 static inline void activate_irq(int irq) 418 { 419 #ifdef CONFIG_ARM 420 /* 421 * ARM requires an extra step to clear IRQ_NOREQUEST, which it 422 * sets on behalf of every irq_chip. Also sets IRQ_NOPROBE. 423 */ 424 set_irq_flags(irq, IRQF_VALID); 425 #else 426 /* same effect on other architectures */ 427 irq_set_noprobe(irq); 428 #endif 429 } 430 431 /*----------------------------------------------------------------------*/ 432 433 struct sih_agent { 434 int irq_base; 435 const struct sih *sih; 436 437 u32 imr; 438 bool imr_change_pending; 439 440 u32 edge_change; 441 442 struct mutex irq_lock; 443 char *irq_name; 444 }; 445 446 /*----------------------------------------------------------------------*/ 447 448 /* 449 * All irq_chip methods get issued from code holding irq_desc[irq].lock, 450 * which can't perform the underlying I2C operations (because they sleep). 451 * So we must hand them off to a thread (workqueue) and cope with asynch 452 * completion, potentially including some re-ordering, of these requests. 453 */ 454 455 static void twl4030_sih_mask(struct irq_data *data) 456 { 457 struct sih_agent *agent = irq_data_get_irq_chip_data(data); 458 459 agent->imr |= BIT(data->irq - agent->irq_base); 460 agent->imr_change_pending = true; 461 } 462 463 static void twl4030_sih_unmask(struct irq_data *data) 464 { 465 struct sih_agent *agent = irq_data_get_irq_chip_data(data); 466 467 agent->imr &= ~BIT(data->irq - agent->irq_base); 468 agent->imr_change_pending = true; 469 } 470 471 static int twl4030_sih_set_type(struct irq_data *data, unsigned trigger) 472 { 473 struct sih_agent *agent = irq_data_get_irq_chip_data(data); 474 475 if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) 476 return -EINVAL; 477 478 if (irqd_get_trigger_type(data) != trigger) 479 agent->edge_change |= BIT(data->irq - agent->irq_base); 480 481 return 0; 482 } 483 484 static void twl4030_sih_bus_lock(struct irq_data *data) 485 { 486 struct sih_agent *agent = irq_data_get_irq_chip_data(data); 487 488 mutex_lock(&agent->irq_lock); 489 } 490 491 static void twl4030_sih_bus_sync_unlock(struct irq_data *data) 492 { 493 struct sih_agent *agent = irq_data_get_irq_chip_data(data); 494 const struct sih *sih = agent->sih; 495 int status; 496 497 if (agent->imr_change_pending) { 498 union { 499 u32 word; 500 u8 bytes[4]; 501 } imr; 502 503 /* byte[0] gets overwritten as we write ... */ 504 imr.word = cpu_to_le32(agent->imr << 8); 505 agent->imr_change_pending = false; 506 507 /* write the whole mask ... simpler than subsetting it */ 508 status = twl_i2c_write(sih->module, imr.bytes, 509 sih->mask[irq_line].imr_offset, 510 sih->bytes_ixr); 511 if (status) 512 pr_err("twl4030: %s, %s --> %d\n", __func__, 513 "write", status); 514 } 515 516 if (agent->edge_change) { 517 u32 edge_change; 518 u8 bytes[6]; 519 520 edge_change = agent->edge_change; 521 agent->edge_change = 0; 522 523 /* 524 * Read, reserving first byte for write scratch. Yes, this 525 * could be cached for some speedup ... but be careful about 526 * any processor on the other IRQ line, EDR registers are 527 * shared. 528 */ 529 status = twl_i2c_read(sih->module, bytes + 1, 530 sih->edr_offset, sih->bytes_edr); 531 if (status) { 532 pr_err("twl4030: %s, %s --> %d\n", __func__, 533 "read", status); 534 return; 535 } 536 537 /* Modify only the bits we know must change */ 538 while (edge_change) { 539 int i = fls(edge_change) - 1; 540 struct irq_data *idata; 541 int byte = 1 + (i >> 2); 542 int off = (i & 0x3) * 2; 543 unsigned int type; 544 545 idata = irq_get_irq_data(i + agent->irq_base); 546 547 bytes[byte] &= ~(0x03 << off); 548 549 type = irqd_get_trigger_type(idata); 550 if (type & IRQ_TYPE_EDGE_RISING) 551 bytes[byte] |= BIT(off + 1); 552 if (type & IRQ_TYPE_EDGE_FALLING) 553 bytes[byte] |= BIT(off + 0); 554 555 edge_change &= ~BIT(i); 556 } 557 558 /* Write */ 559 status = twl_i2c_write(sih->module, bytes, 560 sih->edr_offset, sih->bytes_edr); 561 if (status) 562 pr_err("twl4030: %s, %s --> %d\n", __func__, 563 "write", status); 564 } 565 566 mutex_unlock(&agent->irq_lock); 567 } 568 569 static struct irq_chip twl4030_sih_irq_chip = { 570 .name = "twl4030", 571 .irq_mask = twl4030_sih_mask, 572 .irq_unmask = twl4030_sih_unmask, 573 .irq_set_type = twl4030_sih_set_type, 574 .irq_bus_lock = twl4030_sih_bus_lock, 575 .irq_bus_sync_unlock = twl4030_sih_bus_sync_unlock, 576 }; 577 578 /*----------------------------------------------------------------------*/ 579 580 static inline int sih_read_isr(const struct sih *sih) 581 { 582 int status; 583 union { 584 u8 bytes[4]; 585 u32 word; 586 } isr; 587 588 /* FIXME need retry-on-error ... */ 589 590 isr.word = 0; 591 status = twl_i2c_read(sih->module, isr.bytes, 592 sih->mask[irq_line].isr_offset, sih->bytes_ixr); 593 594 return (status < 0) ? status : le32_to_cpu(isr.word); 595 } 596 597 /* 598 * Generic handler for SIH interrupts ... we "know" this is called 599 * in task context, with IRQs enabled. 600 */ 601 static irqreturn_t handle_twl4030_sih(int irq, void *data) 602 { 603 struct sih_agent *agent = irq_get_handler_data(irq); 604 const struct sih *sih = agent->sih; 605 int isr; 606 607 /* reading ISR acks the IRQs, using clear-on-read mode */ 608 isr = sih_read_isr(sih); 609 610 if (isr < 0) { 611 pr_err("twl4030: %s SIH, read ISR error %d\n", 612 sih->name, isr); 613 /* REVISIT: recover; eventually mask it all, etc */ 614 return IRQ_HANDLED; 615 } 616 617 while (isr) { 618 irq = fls(isr); 619 irq--; 620 isr &= ~BIT(irq); 621 622 if (irq < sih->bits) 623 handle_nested_irq(agent->irq_base + irq); 624 else 625 pr_err("twl4030: %s SIH, invalid ISR bit %d\n", 626 sih->name, irq); 627 } 628 return IRQ_HANDLED; 629 } 630 631 /* returns the first IRQ used by this SIH bank, or negative errno */ 632 int twl4030_sih_setup(struct device *dev, int module, int irq_base) 633 { 634 int sih_mod; 635 const struct sih *sih = NULL; 636 struct sih_agent *agent; 637 int i, irq; 638 int status = -EINVAL; 639 640 /* only support modules with standard clear-on-read for now */ 641 for (sih_mod = 0, sih = sih_modules; sih_mod < nr_sih_modules; 642 sih_mod++, sih++) { 643 if (sih->module == module && sih->set_cor) { 644 status = 0; 645 break; 646 } 647 } 648 649 if (status < 0) 650 return status; 651 652 agent = kzalloc(sizeof *agent, GFP_KERNEL); 653 if (!agent) 654 return -ENOMEM; 655 656 agent->irq_base = irq_base; 657 agent->sih = sih; 658 agent->imr = ~0; 659 mutex_init(&agent->irq_lock); 660 661 for (i = 0; i < sih->bits; i++) { 662 irq = irq_base + i; 663 664 irq_set_chip_data(irq, agent); 665 irq_set_chip_and_handler(irq, &twl4030_sih_irq_chip, 666 handle_edge_irq); 667 irq_set_nested_thread(irq, 1); 668 activate_irq(irq); 669 } 670 671 /* replace generic PIH handler (handle_simple_irq) */ 672 irq = sih_mod + twl4030_irq_base; 673 irq_set_handler_data(irq, agent); 674 agent->irq_name = kasprintf(GFP_KERNEL, "twl4030_%s", sih->name); 675 status = request_threaded_irq(irq, NULL, handle_twl4030_sih, 0, 676 agent->irq_name ?: sih->name, NULL); 677 678 dev_info(dev, "%s (irq %d) chaining IRQs %d..%d\n", sih->name, 679 irq, irq_base, irq_base + i - 1); 680 681 return status < 0 ? status : irq_base; 682 } 683 684 /* FIXME need a call to reverse twl4030_sih_setup() ... */ 685 686 /*----------------------------------------------------------------------*/ 687 688 /* FIXME pass in which interrupt line we'll use ... */ 689 #define twl_irq_line 0 690 691 int twl4030_init_irq(struct device *dev, int irq_num) 692 { 693 static struct irq_chip twl4030_irq_chip; 694 int status, i; 695 int irq_base, irq_end, nr_irqs; 696 struct device_node *node = dev->of_node; 697 698 /* 699 * TWL core and pwr interrupts must be contiguous because 700 * the hwirqs numbers are defined contiguously from 1 to 15. 701 * Create only one domain for both. 702 */ 703 nr_irqs = TWL4030_PWR_NR_IRQS + TWL4030_CORE_NR_IRQS; 704 705 irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0); 706 if (IS_ERR_VALUE(irq_base)) { 707 dev_err(dev, "Fail to allocate IRQ descs\n"); 708 return irq_base; 709 } 710 711 irq_domain_add_legacy(node, nr_irqs, irq_base, 0, 712 &irq_domain_simple_ops, NULL); 713 714 irq_end = irq_base + TWL4030_CORE_NR_IRQS; 715 716 /* 717 * Mask and clear all TWL4030 interrupts since initially we do 718 * not have any TWL4030 module interrupt handlers present 719 */ 720 status = twl4030_init_sih_modules(twl_irq_line); 721 if (status < 0) 722 return status; 723 724 twl4030_irq_base = irq_base; 725 726 /* 727 * Install an irq handler for each of the SIH modules; 728 * clone dummy irq_chip since PIH can't *do* anything 729 */ 730 twl4030_irq_chip = dummy_irq_chip; 731 twl4030_irq_chip.name = "twl4030"; 732 733 twl4030_sih_irq_chip.irq_ack = dummy_irq_chip.irq_ack; 734 735 for (i = irq_base; i < irq_end; i++) { 736 irq_set_chip_and_handler(i, &twl4030_irq_chip, 737 handle_simple_irq); 738 irq_set_nested_thread(i, 1); 739 activate_irq(i); 740 } 741 742 dev_info(dev, "%s (irq %d) chaining IRQs %d..%d\n", "PIH", 743 irq_num, irq_base, irq_end); 744 745 /* ... and the PWR_INT module ... */ 746 status = twl4030_sih_setup(dev, TWL4030_MODULE_INT, irq_end); 747 if (status < 0) { 748 dev_err(dev, "sih_setup PWR INT --> %d\n", status); 749 goto fail; 750 } 751 752 /* install an irq handler to demultiplex the TWL4030 interrupt */ 753 status = request_threaded_irq(irq_num, NULL, handle_twl4030_pih, 754 IRQF_ONESHOT, 755 "TWL4030-PIH", NULL); 756 if (status < 0) { 757 dev_err(dev, "could not claim irq%d: %d\n", irq_num, status); 758 goto fail_rqirq; 759 } 760 enable_irq_wake(irq_num); 761 762 return irq_base; 763 fail_rqirq: 764 /* clean up twl4030_sih_setup */ 765 fail: 766 for (i = irq_base; i < irq_end; i++) { 767 irq_set_nested_thread(i, 0); 768 irq_set_chip_and_handler(i, NULL, NULL); 769 } 770 771 return status; 772 } 773 774 int twl4030_exit_irq(void) 775 { 776 /* FIXME undo twl_init_irq() */ 777 if (twl4030_irq_base) { 778 pr_err("twl4030: can't yet clean up IRQs?\n"); 779 return -ENOSYS; 780 } 781 return 0; 782 } 783 784 int twl4030_init_chip_irq(const char *chip) 785 { 786 if (!strcmp(chip, "twl5031")) { 787 sih_modules = sih_modules_twl5031; 788 nr_sih_modules = ARRAY_SIZE(sih_modules_twl5031); 789 } else { 790 sih_modules = sih_modules_twl4030; 791 nr_sih_modules = ARRAY_SIZE(sih_modules_twl4030); 792 } 793 794 return 0; 795 } 796