xref: /openbmc/linux/drivers/mfd/tps6105x.c (revision 2a12187d)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Core driver for TPS61050/61052 boost converters, used for while LED
4  * driving, audio power amplification, white LED flash, and generic
5  * boost conversion. Additionally it provides a 1-bit GPIO pin (out or in)
6  * and a flash synchronization pin to synchronize flash events when used as
7  * flashgun.
8  *
9  * Copyright (C) 2011 ST-Ericsson SA
10  * Written on behalf of Linaro for ST-Ericsson
11  *
12  * Author: Linus Walleij <linus.walleij@linaro.org>
13  */
14 
15 #include <linux/module.h>
16 #include <linux/init.h>
17 #include <linux/i2c.h>
18 #include <linux/regmap.h>
19 #include <linux/gpio.h>
20 #include <linux/spinlock.h>
21 #include <linux/slab.h>
22 #include <linux/err.h>
23 #include <linux/mfd/core.h>
24 #include <linux/mfd/tps6105x.h>
25 
26 static struct regmap_config tps6105x_regmap_config = {
27 	.reg_bits = 8,
28 	.val_bits = 8,
29 	.max_register = TPS6105X_REG_3,
30 };
31 
32 static int tps6105x_startup(struct tps6105x *tps6105x)
33 {
34 	int ret;
35 	unsigned int regval;
36 
37 	ret = regmap_read(tps6105x->regmap, TPS6105X_REG_0, &regval);
38 	if (ret)
39 		return ret;
40 	switch (regval >> TPS6105X_REG0_MODE_SHIFT) {
41 	case TPS6105X_REG0_MODE_SHUTDOWN:
42 		dev_info(&tps6105x->client->dev,
43 			 "TPS6105x found in SHUTDOWN mode\n");
44 		break;
45 	case TPS6105X_REG0_MODE_TORCH:
46 		dev_info(&tps6105x->client->dev,
47 			 "TPS6105x found in TORCH mode\n");
48 		break;
49 	case TPS6105X_REG0_MODE_TORCH_FLASH:
50 		dev_info(&tps6105x->client->dev,
51 			 "TPS6105x found in FLASH mode\n");
52 		break;
53 	case TPS6105X_REG0_MODE_VOLTAGE:
54 		dev_info(&tps6105x->client->dev,
55 			 "TPS6105x found in VOLTAGE mode\n");
56 		break;
57 	default:
58 		break;
59 	}
60 
61 	return ret;
62 }
63 
64 /*
65  * MFD cells - we always have a GPIO cell and we have one cell
66  * which is selected operation mode.
67  */
68 static struct mfd_cell tps6105x_gpio_cell = {
69 	.name = "tps6105x-gpio",
70 };
71 
72 static struct mfd_cell tps6105x_leds_cell = {
73 	.name = "tps6105x-leds",
74 };
75 
76 static struct mfd_cell tps6105x_flash_cell = {
77 	.name = "tps6105x-flash",
78 };
79 
80 static struct mfd_cell tps6105x_regulator_cell = {
81 	.name = "tps6105x-regulator",
82 };
83 
84 static int tps6105x_add_device(struct tps6105x *tps6105x,
85 			       struct mfd_cell *cell)
86 {
87 	cell->platform_data = tps6105x;
88 	cell->pdata_size = sizeof(*tps6105x);
89 
90 	return mfd_add_devices(&tps6105x->client->dev,
91 			       PLATFORM_DEVID_AUTO, cell, 1, NULL, 0, NULL);
92 }
93 
94 static struct tps6105x_platform_data *tps6105x_parse_dt(struct device *dev)
95 {
96 	struct device_node *np = dev->of_node;
97 	struct tps6105x_platform_data *pdata;
98 	struct device_node *child;
99 
100 	if (!np)
101 		return ERR_PTR(-EINVAL);
102 	if (of_get_available_child_count(np) > 1) {
103 		dev_err(dev, "cannot support multiple operational modes");
104 		return ERR_PTR(-EINVAL);
105 	}
106 	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
107 	if (!pdata)
108 		return ERR_PTR(-ENOMEM);
109 	pdata->mode = TPS6105X_MODE_SHUTDOWN;
110 	for_each_available_child_of_node(np, child) {
111 		if (child->name && !of_node_cmp(child->name, "regulator"))
112 			pdata->mode = TPS6105X_MODE_VOLTAGE;
113 		else if (child->name && !of_node_cmp(child->name, "led"))
114 			pdata->mode = TPS6105X_MODE_TORCH;
115 	}
116 
117 	return pdata;
118 }
119 
120 static int tps6105x_probe(struct i2c_client *client)
121 {
122 	struct tps6105x			*tps6105x;
123 	struct tps6105x_platform_data	*pdata;
124 	int ret;
125 
126 	pdata = dev_get_platdata(&client->dev);
127 	if (!pdata)
128 		pdata = tps6105x_parse_dt(&client->dev);
129 	if (IS_ERR(pdata)) {
130 		dev_err(&client->dev, "No platform data or DT found");
131 		return PTR_ERR(pdata);
132 	}
133 
134 	tps6105x = devm_kmalloc(&client->dev, sizeof(*tps6105x), GFP_KERNEL);
135 	if (!tps6105x)
136 		return -ENOMEM;
137 
138 	tps6105x->regmap = devm_regmap_init_i2c(client, &tps6105x_regmap_config);
139 	if (IS_ERR(tps6105x->regmap))
140 		return PTR_ERR(tps6105x->regmap);
141 
142 	i2c_set_clientdata(client, tps6105x);
143 	tps6105x->client = client;
144 	tps6105x->pdata = pdata;
145 
146 	ret = tps6105x_startup(tps6105x);
147 	if (ret) {
148 		dev_err(&client->dev, "chip initialization failed\n");
149 		return ret;
150 	}
151 
152 	ret = tps6105x_add_device(tps6105x, &tps6105x_gpio_cell);
153 	if (ret)
154 		return ret;
155 
156 	switch (pdata->mode) {
157 	case TPS6105X_MODE_SHUTDOWN:
158 		dev_info(&client->dev,
159 			 "present, not used for anything, only GPIO\n");
160 		break;
161 	case TPS6105X_MODE_TORCH:
162 		ret = tps6105x_add_device(tps6105x, &tps6105x_leds_cell);
163 		break;
164 	case TPS6105X_MODE_TORCH_FLASH:
165 		ret = tps6105x_add_device(tps6105x, &tps6105x_flash_cell);
166 		break;
167 	case TPS6105X_MODE_VOLTAGE:
168 		ret = tps6105x_add_device(tps6105x, &tps6105x_regulator_cell);
169 		break;
170 	default:
171 		dev_warn(&client->dev, "invalid mode: %d\n", pdata->mode);
172 		break;
173 	}
174 
175 	if (ret)
176 		mfd_remove_devices(&client->dev);
177 
178 	return ret;
179 }
180 
181 static void tps6105x_remove(struct i2c_client *client)
182 {
183 	struct tps6105x *tps6105x = i2c_get_clientdata(client);
184 
185 	mfd_remove_devices(&client->dev);
186 
187 	/* Put chip in shutdown mode */
188 	regmap_update_bits(tps6105x->regmap, TPS6105X_REG_0,
189 		TPS6105X_REG0_MODE_MASK,
190 		TPS6105X_MODE_SHUTDOWN << TPS6105X_REG0_MODE_SHIFT);
191 }
192 
193 static const struct i2c_device_id tps6105x_id[] = {
194 	{ "tps61050", 0 },
195 	{ "tps61052", 0 },
196 	{ }
197 };
198 MODULE_DEVICE_TABLE(i2c, tps6105x_id);
199 
200 static const struct of_device_id tps6105x_of_match[] = {
201 	{ .compatible = "ti,tps61050" },
202 	{ .compatible = "ti,tps61052" },
203 	{ },
204 };
205 MODULE_DEVICE_TABLE(of, tps6105x_of_match);
206 
207 static struct i2c_driver tps6105x_driver = {
208 	.driver = {
209 		.name	= "tps6105x",
210 		.of_match_table = tps6105x_of_match,
211 	},
212 	.probe_new	= tps6105x_probe,
213 	.remove		= tps6105x_remove,
214 	.id_table	= tps6105x_id,
215 };
216 
217 static int __init tps6105x_init(void)
218 {
219 	return i2c_add_driver(&tps6105x_driver);
220 }
221 subsys_initcall(tps6105x_init);
222 
223 static void __exit tps6105x_exit(void)
224 {
225 	i2c_del_driver(&tps6105x_driver);
226 }
227 module_exit(tps6105x_exit);
228 
229 MODULE_AUTHOR("Linus Walleij");
230 MODULE_DESCRIPTION("TPS6105x White LED Boost Converter Driver");
231 MODULE_LICENSE("GPL v2");
232