1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * TI LMU (Lighting Management Unit) Core Driver 4 * 5 * Copyright 2017 Texas Instruments 6 * 7 * Author: Milo Kim <milo.kim@ti.com> 8 */ 9 10 #include <linux/delay.h> 11 #include <linux/err.h> 12 #include <linux/gpio/consumer.h> 13 #include <linux/i2c.h> 14 #include <linux/kernel.h> 15 #include <linux/mfd/core.h> 16 #include <linux/mfd/ti-lmu.h> 17 #include <linux/mfd/ti-lmu-register.h> 18 #include <linux/module.h> 19 #include <linux/of.h> 20 #include <linux/of_device.h> 21 #include <linux/slab.h> 22 23 struct ti_lmu_data { 24 const struct mfd_cell *cells; 25 int num_cells; 26 unsigned int max_register; 27 }; 28 29 static int ti_lmu_enable_hw(struct ti_lmu *lmu, enum ti_lmu_id id) 30 { 31 if (lmu->en_gpio) 32 gpiod_set_value(lmu->en_gpio, 1); 33 34 /* Delay about 1ms after HW enable pin control */ 35 usleep_range(1000, 1500); 36 37 /* LM3631 has additional power up sequence - enable LCD_EN bit. */ 38 if (id == LM3631) { 39 return regmap_update_bits(lmu->regmap, LM3631_REG_DEVCTRL, 40 LM3631_LCD_EN_MASK, 41 LM3631_LCD_EN_MASK); 42 } 43 44 return 0; 45 } 46 47 static void ti_lmu_disable_hw(void *data) 48 { 49 struct ti_lmu *lmu = data; 50 if (lmu->en_gpio) 51 gpiod_set_value(lmu->en_gpio, 0); 52 } 53 54 #define LM363X_REGULATOR(_id) \ 55 { \ 56 .name = "lm363x-regulator", \ 57 .id = _id, \ 58 .of_compatible = "ti,lm363x-regulator", \ 59 } \ 60 61 static const struct mfd_cell lm3631_devices[] = { 62 LM363X_REGULATOR(LM3631_BOOST), 63 LM363X_REGULATOR(LM3631_LDO_CONT), 64 LM363X_REGULATOR(LM3631_LDO_OREF), 65 LM363X_REGULATOR(LM3631_LDO_POS), 66 LM363X_REGULATOR(LM3631_LDO_NEG), 67 { 68 .name = "ti-lmu-backlight", 69 .id = LM3631, 70 .of_compatible = "ti,lm3631-backlight", 71 }, 72 }; 73 74 static const struct mfd_cell lm3632_devices[] = { 75 LM363X_REGULATOR(LM3632_BOOST), 76 LM363X_REGULATOR(LM3632_LDO_POS), 77 LM363X_REGULATOR(LM3632_LDO_NEG), 78 { 79 .name = "ti-lmu-backlight", 80 .id = LM3632, 81 .of_compatible = "ti,lm3632-backlight", 82 }, 83 }; 84 85 static const struct mfd_cell lm3633_devices[] = { 86 { 87 .name = "ti-lmu-backlight", 88 .id = LM3633, 89 .of_compatible = "ti,lm3633-backlight", 90 }, 91 { 92 .name = "lm3633-leds", 93 .of_compatible = "ti,lm3633-leds", 94 }, 95 /* Monitoring driver for open/short circuit detection */ 96 { 97 .name = "ti-lmu-fault-monitor", 98 .id = LM3633, 99 .of_compatible = "ti,lm3633-fault-monitor", 100 }, 101 }; 102 103 static const struct mfd_cell lm3695_devices[] = { 104 { 105 .name = "ti-lmu-backlight", 106 .id = LM3695, 107 .of_compatible = "ti,lm3695-backlight", 108 }, 109 }; 110 111 static const struct mfd_cell lm36274_devices[] = { 112 LM363X_REGULATOR(LM36274_BOOST), 113 LM363X_REGULATOR(LM36274_LDO_POS), 114 LM363X_REGULATOR(LM36274_LDO_NEG), 115 { 116 .name = "lm36274-leds", 117 .id = LM36274, 118 .of_compatible = "ti,lm36274-backlight", 119 }, 120 }; 121 122 #define TI_LMU_DATA(chip, max_reg) \ 123 static const struct ti_lmu_data chip##_data = \ 124 { \ 125 .cells = chip##_devices, \ 126 .num_cells = ARRAY_SIZE(chip##_devices),\ 127 .max_register = max_reg, \ 128 } \ 129 130 TI_LMU_DATA(lm3631, LM3631_MAX_REG); 131 TI_LMU_DATA(lm3632, LM3632_MAX_REG); 132 TI_LMU_DATA(lm3633, LM3633_MAX_REG); 133 TI_LMU_DATA(lm3695, LM3695_MAX_REG); 134 TI_LMU_DATA(lm36274, LM36274_MAX_REG); 135 136 static int ti_lmu_probe(struct i2c_client *cl) 137 { 138 const struct i2c_device_id *id = i2c_client_get_device_id(cl); 139 struct device *dev = &cl->dev; 140 const struct ti_lmu_data *data; 141 struct regmap_config regmap_cfg; 142 struct ti_lmu *lmu; 143 int ret; 144 145 /* 146 * Get device specific data from of_match table. 147 * This data is defined by using TI_LMU_DATA() macro. 148 */ 149 data = of_device_get_match_data(dev); 150 if (!data) 151 return -ENODEV; 152 153 lmu = devm_kzalloc(dev, sizeof(*lmu), GFP_KERNEL); 154 if (!lmu) 155 return -ENOMEM; 156 157 lmu->dev = &cl->dev; 158 159 /* Setup regmap */ 160 memset(®map_cfg, 0, sizeof(struct regmap_config)); 161 regmap_cfg.reg_bits = 8; 162 regmap_cfg.val_bits = 8; 163 regmap_cfg.name = id->name; 164 regmap_cfg.max_register = data->max_register; 165 166 lmu->regmap = devm_regmap_init_i2c(cl, ®map_cfg); 167 if (IS_ERR(lmu->regmap)) 168 return PTR_ERR(lmu->regmap); 169 170 /* HW enable pin control and additional power up sequence if required */ 171 lmu->en_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_HIGH); 172 if (IS_ERR(lmu->en_gpio)) { 173 ret = PTR_ERR(lmu->en_gpio); 174 dev_err(dev, "Can not request enable GPIO: %d\n", ret); 175 return ret; 176 } 177 178 ret = ti_lmu_enable_hw(lmu, id->driver_data); 179 if (ret) 180 return ret; 181 182 ret = devm_add_action_or_reset(dev, ti_lmu_disable_hw, lmu); 183 if (ret) 184 return ret; 185 186 /* 187 * Fault circuit(open/short) can be detected by ti-lmu-fault-monitor. 188 * After fault detection is done, some devices should re-initialize 189 * configuration. The notifier enables such kind of handling. 190 */ 191 BLOCKING_INIT_NOTIFIER_HEAD(&lmu->notifier); 192 193 i2c_set_clientdata(cl, lmu); 194 195 return devm_mfd_add_devices(lmu->dev, 0, data->cells, 196 data->num_cells, NULL, 0, NULL); 197 } 198 199 static const struct of_device_id ti_lmu_of_match[] = { 200 { .compatible = "ti,lm3631", .data = &lm3631_data }, 201 { .compatible = "ti,lm3632", .data = &lm3632_data }, 202 { .compatible = "ti,lm3633", .data = &lm3633_data }, 203 { .compatible = "ti,lm3695", .data = &lm3695_data }, 204 { .compatible = "ti,lm36274", .data = &lm36274_data }, 205 { } 206 }; 207 MODULE_DEVICE_TABLE(of, ti_lmu_of_match); 208 209 static const struct i2c_device_id ti_lmu_ids[] = { 210 { "lm3631", LM3631 }, 211 { "lm3632", LM3632 }, 212 { "lm3633", LM3633 }, 213 { "lm3695", LM3695 }, 214 { "lm36274", LM36274 }, 215 { } 216 }; 217 MODULE_DEVICE_TABLE(i2c, ti_lmu_ids); 218 219 static struct i2c_driver ti_lmu_driver = { 220 .probe_new = ti_lmu_probe, 221 .driver = { 222 .name = "ti-lmu", 223 .of_match_table = ti_lmu_of_match, 224 }, 225 .id_table = ti_lmu_ids, 226 }; 227 228 module_i2c_driver(ti_lmu_driver); 229 230 MODULE_DESCRIPTION("TI LMU MFD Core Driver"); 231 MODULE_AUTHOR("Milo Kim"); 232 MODULE_LICENSE("GPL v2"); 233