xref: /openbmc/linux/drivers/mfd/stmpe.h (revision 95e9fd10)
1 /*
2  * Copyright (C) ST-Ericsson SA 2010
3  *
4  * License Terms: GNU General Public License, version 2
5  * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
6  */
7 
8 #ifndef __STMPE_H
9 #define __STMPE_H
10 
11 #include <linux/device.h>
12 #include <linux/mfd/core.h>
13 #include <linux/mfd/stmpe.h>
14 #include <linux/printk.h>
15 #include <linux/types.h>
16 
17 extern const struct dev_pm_ops stmpe_dev_pm_ops;
18 
19 #ifdef STMPE_DUMP_BYTES
20 static inline void stmpe_dump_bytes(const char *str, const void *buf,
21 				    size_t len)
22 {
23 	print_hex_dump_bytes(str, DUMP_PREFIX_OFFSET, buf, len);
24 }
25 #else
26 static inline void stmpe_dump_bytes(const char *str, const void *buf,
27 				    size_t len)
28 {
29 }
30 #endif
31 
32 /**
33  * struct stmpe_variant_block - information about block
34  * @cell:	base mfd cell
35  * @irq:	interrupt number to be added to each IORESOURCE_IRQ
36  *		in the cell
37  * @block:	block id; used for identification with platform data and for
38  *		enable and altfunc callbacks
39  */
40 struct stmpe_variant_block {
41 	struct mfd_cell		*cell;
42 	int			irq;
43 	enum stmpe_block	block;
44 };
45 
46 /**
47  * struct stmpe_variant_info - variant-specific information
48  * @name:	part name
49  * @id_val:	content of CHIPID register
50  * @id_mask:	bits valid in CHIPID register for comparison with id_val
51  * @num_gpios:	number of GPIOS
52  * @af_bits:	number of bits used to specify the alternate function
53  * @regs: variant specific registers.
54  * @blocks:	list of blocks present on this device
55  * @num_blocks:	number of blocks present on this device
56  * @num_irqs:	number of internal IRQs available on this device
57  * @enable:	callback to enable the specified blocks.
58  *		Called with the I/O lock held.
59  * @get_altfunc: callback to get the alternate function number for the
60  *		 specific block
61  * @enable_autosleep: callback to configure autosleep with specified timeout
62  */
63 struct stmpe_variant_info {
64 	const char *name;
65 	u16 id_val;
66 	u16 id_mask;
67 	int num_gpios;
68 	int af_bits;
69 	const u8 *regs;
70 	struct stmpe_variant_block *blocks;
71 	int num_blocks;
72 	int num_irqs;
73 	int (*enable)(struct stmpe *stmpe, unsigned int blocks, bool enable);
74 	int (*get_altfunc)(struct stmpe *stmpe, enum stmpe_block block);
75 	int (*enable_autosleep)(struct stmpe *stmpe, int autosleep_timeout);
76 };
77 
78 /**
79  * struct stmpe_client_info - i2c or spi specific routines/info
80  * @data: client specific data
81  * @read_byte: read single byte
82  * @write_byte: write single byte
83  * @read_block: read block or multiple bytes
84  * @write_block: write block or multiple bytes
85  * @init: client init routine, called during probe
86  */
87 struct stmpe_client_info {
88 	void *data;
89 	int irq;
90 	void *client;
91 	struct device *dev;
92 	int (*read_byte)(struct stmpe *stmpe, u8 reg);
93 	int (*write_byte)(struct stmpe *stmpe, u8 reg, u8 val);
94 	int (*read_block)(struct stmpe *stmpe, u8 reg, u8 len, u8 *values);
95 	int (*write_block)(struct stmpe *stmpe, u8 reg, u8 len,
96 			const u8 *values);
97 	void (*init)(struct stmpe *stmpe);
98 };
99 
100 int stmpe_probe(struct stmpe_client_info *ci, int partnum);
101 int stmpe_remove(struct stmpe *stmpe);
102 
103 #define STMPE_ICR_LSB_HIGH	(1 << 2)
104 #define STMPE_ICR_LSB_EDGE	(1 << 1)
105 #define STMPE_ICR_LSB_GIM	(1 << 0)
106 
107 /*
108  * STMPE801
109  */
110 #define STMPE801_ID			0x0108
111 #define STMPE801_NR_INTERNAL_IRQS	1
112 
113 #define STMPE801_REG_CHIP_ID		0x00
114 #define STMPE801_REG_VERSION_ID		0x02
115 #define STMPE801_REG_SYS_CTRL		0x04
116 #define STMPE801_REG_GPIO_INT_EN	0x08
117 #define STMPE801_REG_GPIO_INT_STA	0x09
118 #define STMPE801_REG_GPIO_MP_STA	0x10
119 #define STMPE801_REG_GPIO_SET_PIN	0x11
120 #define STMPE801_REG_GPIO_DIR		0x12
121 
122 #define STMPE801_REG_SYS_CTRL_RESET	(1 << 7)
123 #define STMPE801_REG_SYS_CTRL_INT_EN	(1 << 2)
124 #define STMPE801_REG_SYS_CTRL_INT_HI	(1 << 0)
125 
126 /*
127  * STMPE811
128  */
129 
130 #define STMPE811_IRQ_TOUCH_DET		0
131 #define STMPE811_IRQ_FIFO_TH		1
132 #define STMPE811_IRQ_FIFO_OFLOW		2
133 #define STMPE811_IRQ_FIFO_FULL		3
134 #define STMPE811_IRQ_FIFO_EMPTY		4
135 #define STMPE811_IRQ_TEMP_SENS		5
136 #define STMPE811_IRQ_ADC		6
137 #define STMPE811_IRQ_GPIOC		7
138 #define STMPE811_NR_INTERNAL_IRQS	8
139 
140 #define STMPE811_REG_CHIP_ID		0x00
141 #define STMPE811_REG_SYS_CTRL2		0x04
142 #define STMPE811_REG_SPI_CFG		0x08
143 #define STMPE811_REG_INT_CTRL		0x09
144 #define STMPE811_REG_INT_EN		0x0A
145 #define STMPE811_REG_INT_STA		0x0B
146 #define STMPE811_REG_GPIO_INT_EN	0x0C
147 #define STMPE811_REG_GPIO_INT_STA	0x0D
148 #define STMPE811_REG_GPIO_SET_PIN	0x10
149 #define STMPE811_REG_GPIO_CLR_PIN	0x11
150 #define STMPE811_REG_GPIO_MP_STA	0x12
151 #define STMPE811_REG_GPIO_DIR		0x13
152 #define STMPE811_REG_GPIO_ED		0x14
153 #define STMPE811_REG_GPIO_RE		0x15
154 #define STMPE811_REG_GPIO_FE		0x16
155 #define STMPE811_REG_GPIO_AF		0x17
156 
157 #define STMPE811_SYS_CTRL2_ADC_OFF	(1 << 0)
158 #define STMPE811_SYS_CTRL2_TSC_OFF	(1 << 1)
159 #define STMPE811_SYS_CTRL2_GPIO_OFF	(1 << 2)
160 #define STMPE811_SYS_CTRL2_TS_OFF	(1 << 3)
161 
162 /*
163  * STMPE1601
164  */
165 
166 #define STMPE1601_IRQ_GPIOC		8
167 #define STMPE1601_IRQ_PWM3		7
168 #define STMPE1601_IRQ_PWM2		6
169 #define STMPE1601_IRQ_PWM1		5
170 #define STMPE1601_IRQ_PWM0		4
171 #define STMPE1601_IRQ_KEYPAD_OVER	2
172 #define STMPE1601_IRQ_KEYPAD		1
173 #define STMPE1601_IRQ_WAKEUP		0
174 #define STMPE1601_NR_INTERNAL_IRQS	9
175 
176 #define STMPE1601_REG_SYS_CTRL			0x02
177 #define STMPE1601_REG_SYS_CTRL2			0x03
178 #define STMPE1601_REG_ICR_LSB			0x11
179 #define STMPE1601_REG_IER_LSB			0x13
180 #define STMPE1601_REG_ISR_MSB			0x14
181 #define STMPE1601_REG_CHIP_ID			0x80
182 #define STMPE1601_REG_INT_EN_GPIO_MASK_LSB	0x17
183 #define STMPE1601_REG_INT_STA_GPIO_MSB		0x18
184 #define STMPE1601_REG_GPIO_MP_LSB		0x87
185 #define STMPE1601_REG_GPIO_SET_LSB		0x83
186 #define STMPE1601_REG_GPIO_CLR_LSB		0x85
187 #define STMPE1601_REG_GPIO_SET_DIR_LSB		0x89
188 #define STMPE1601_REG_GPIO_ED_MSB		0x8A
189 #define STMPE1601_REG_GPIO_RE_LSB		0x8D
190 #define STMPE1601_REG_GPIO_FE_LSB		0x8F
191 #define STMPE1601_REG_GPIO_AF_U_MSB		0x92
192 
193 #define STMPE1601_SYS_CTRL_ENABLE_GPIO		(1 << 3)
194 #define STMPE1601_SYS_CTRL_ENABLE_KPC		(1 << 1)
195 #define STMPE1601_SYSCON_ENABLE_SPWM		(1 << 0)
196 
197 /* The 1601/2403 share the same masks */
198 #define STMPE1601_AUTOSLEEP_TIMEOUT_MASK	(0x7)
199 #define STPME1601_AUTOSLEEP_ENABLE		(1 << 3)
200 
201 /*
202  * STMPE24xx
203  */
204 
205 #define STMPE24XX_IRQ_GPIOC		8
206 #define STMPE24XX_IRQ_PWM2		7
207 #define STMPE24XX_IRQ_PWM1		6
208 #define STMPE24XX_IRQ_PWM0		5
209 #define STMPE24XX_IRQ_ROT_OVER		4
210 #define STMPE24XX_IRQ_ROT		3
211 #define STMPE24XX_IRQ_KEYPAD_OVER	2
212 #define STMPE24XX_IRQ_KEYPAD		1
213 #define STMPE24XX_IRQ_WAKEUP		0
214 #define STMPE24XX_NR_INTERNAL_IRQS	9
215 
216 #define STMPE24XX_REG_SYS_CTRL		0x02
217 #define STMPE24XX_REG_ICR_LSB		0x11
218 #define STMPE24XX_REG_IER_LSB		0x13
219 #define STMPE24XX_REG_ISR_MSB		0x14
220 #define STMPE24XX_REG_CHIP_ID		0x80
221 #define STMPE24XX_REG_IEGPIOR_LSB	0x18
222 #define STMPE24XX_REG_ISGPIOR_MSB	0x19
223 #define STMPE24XX_REG_GPMR_LSB		0xA5
224 #define STMPE24XX_REG_GPSR_LSB		0x85
225 #define STMPE24XX_REG_GPCR_LSB		0x88
226 #define STMPE24XX_REG_GPDR_LSB		0x8B
227 #define STMPE24XX_REG_GPEDR_MSB		0x8C
228 #define STMPE24XX_REG_GPRER_LSB		0x91
229 #define STMPE24XX_REG_GPFER_LSB		0x94
230 #define STMPE24XX_REG_GPAFR_U_MSB	0x9B
231 
232 #define STMPE24XX_SYS_CTRL_ENABLE_GPIO		(1 << 3)
233 #define STMPE24XX_SYSCON_ENABLE_PWM		(1 << 2)
234 #define STMPE24XX_SYS_CTRL_ENABLE_KPC		(1 << 1)
235 #define STMPE24XX_SYSCON_ENABLE_ROT		(1 << 0)
236 
237 #endif
238