1 /* 2 * ST Microelectronics MFD: stmpe's spi client specific driver 3 * 4 * Copyright (C) ST Microelectronics SA 2011 5 * 6 * License Terms: GNU General Public License, version 2 7 * Author: Viresh Kumar <viresh.linux@gmail.com> for ST Microelectronics 8 */ 9 10 #include <linux/spi/spi.h> 11 #include <linux/interrupt.h> 12 #include <linux/kernel.h> 13 #include <linux/module.h> 14 #include <linux/types.h> 15 #include "stmpe.h" 16 17 #define READ_CMD (1 << 7) 18 19 static int spi_reg_read(struct stmpe *stmpe, u8 reg) 20 { 21 struct spi_device *spi = stmpe->client; 22 int status = spi_w8r16(spi, reg | READ_CMD); 23 24 return (status < 0) ? status : status >> 8; 25 } 26 27 static int spi_reg_write(struct stmpe *stmpe, u8 reg, u8 val) 28 { 29 struct spi_device *spi = stmpe->client; 30 u16 cmd = (val << 8) | reg; 31 32 return spi_write(spi, (const u8 *)&cmd, 2); 33 } 34 35 static int spi_block_read(struct stmpe *stmpe, u8 reg, u8 length, u8 *values) 36 { 37 int ret, i; 38 39 for (i = 0; i < length; i++) { 40 ret = spi_reg_read(stmpe, reg + i); 41 if (ret < 0) 42 return ret; 43 *(values + i) = ret; 44 } 45 46 return 0; 47 } 48 49 static int spi_block_write(struct stmpe *stmpe, u8 reg, u8 length, 50 const u8 *values) 51 { 52 int ret = 0, i; 53 54 for (i = length; i > 0; i--, reg++) { 55 ret = spi_reg_write(stmpe, reg, *(values + i - 1)); 56 if (ret < 0) 57 return ret; 58 } 59 60 return ret; 61 } 62 63 static void spi_init(struct stmpe *stmpe) 64 { 65 struct spi_device *spi = stmpe->client; 66 67 spi->bits_per_word = 8; 68 69 /* This register is only present for stmpe811 */ 70 if (stmpe->variant->id_val == 0x0811) 71 spi_reg_write(stmpe, STMPE811_REG_SPI_CFG, spi->mode); 72 73 if (spi_setup(spi) < 0) 74 dev_dbg(&spi->dev, "spi_setup failed\n"); 75 } 76 77 static struct stmpe_client_info spi_ci = { 78 .read_byte = spi_reg_read, 79 .write_byte = spi_reg_write, 80 .read_block = spi_block_read, 81 .write_block = spi_block_write, 82 .init = spi_init, 83 }; 84 85 static int __devinit 86 stmpe_spi_probe(struct spi_device *spi) 87 { 88 const struct spi_device_id *id = spi_get_device_id(spi); 89 90 /* don't exceed max specified rate - 1MHz - Limitation of STMPE */ 91 if (spi->max_speed_hz > 1000000) { 92 dev_dbg(&spi->dev, "f(sample) %d KHz?\n", 93 (spi->max_speed_hz/1000)); 94 return -EINVAL; 95 } 96 97 spi_ci.irq = spi->irq; 98 spi_ci.client = spi; 99 spi_ci.dev = &spi->dev; 100 101 return stmpe_probe(&spi_ci, id->driver_data); 102 } 103 104 static int __devexit stmpe_spi_remove(struct spi_device *spi) 105 { 106 struct stmpe *stmpe = dev_get_drvdata(&spi->dev); 107 108 return stmpe_remove(stmpe); 109 } 110 111 static const struct spi_device_id stmpe_spi_id[] = { 112 { "stmpe610", STMPE610 }, 113 { "stmpe801", STMPE801 }, 114 { "stmpe811", STMPE811 }, 115 { "stmpe1601", STMPE1601 }, 116 { "stmpe2401", STMPE2401 }, 117 { "stmpe2403", STMPE2403 }, 118 { } 119 }; 120 MODULE_DEVICE_TABLE(spi, stmpe_id); 121 122 static struct spi_driver stmpe_spi_driver = { 123 .driver = { 124 .name = "stmpe-spi", 125 .owner = THIS_MODULE, 126 #ifdef CONFIG_PM 127 .pm = &stmpe_dev_pm_ops, 128 #endif 129 }, 130 .probe = stmpe_spi_probe, 131 .remove = __devexit_p(stmpe_spi_remove), 132 .id_table = stmpe_spi_id, 133 }; 134 135 static int __init stmpe_init(void) 136 { 137 return spi_register_driver(&stmpe_spi_driver); 138 } 139 subsys_initcall(stmpe_init); 140 141 static void __exit stmpe_exit(void) 142 { 143 spi_unregister_driver(&stmpe_spi_driver); 144 } 145 module_exit(stmpe_exit); 146 147 MODULE_LICENSE("GPL v2"); 148 MODULE_DESCRIPTION("STMPE MFD SPI Interface Driver"); 149 MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>"); 150