xref: /openbmc/linux/drivers/mfd/sprd-sc27xx-spi.c (revision 884caada)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (C) 2017 Spreadtrum Communications Inc.
4  */
5 
6 #include <linux/interrupt.h>
7 #include <linux/kernel.h>
8 #include <linux/module.h>
9 #include <linux/mfd/core.h>
10 #include <linux/of_device.h>
11 #include <linux/regmap.h>
12 #include <linux/spi/spi.h>
13 
14 #define SPRD_PMIC_INT_MASK_STATUS	0x0
15 #define SPRD_PMIC_INT_RAW_STATUS	0x4
16 #define SPRD_PMIC_INT_EN		0x8
17 
18 #define SPRD_SC2731_IRQ_BASE		0x140
19 #define SPRD_SC2731_IRQ_NUMS		16
20 
21 struct sprd_pmic {
22 	struct regmap *regmap;
23 	struct device *dev;
24 	struct regmap_irq *irqs;
25 	struct regmap_irq_chip irq_chip;
26 	struct regmap_irq_chip_data *irq_data;
27 	int irq;
28 };
29 
30 struct sprd_pmic_data {
31 	u32 irq_base;
32 	u32 num_irqs;
33 };
34 
35 /*
36  * Since different PMICs of SC27xx series can have different interrupt
37  * base address and irq number, we should save irq number and irq base
38  * in the device data structure.
39  */
40 static const struct sprd_pmic_data sc2731_data = {
41 	.irq_base = SPRD_SC2731_IRQ_BASE,
42 	.num_irqs = SPRD_SC2731_IRQ_NUMS,
43 };
44 
45 static const struct mfd_cell sprd_pmic_devs[] = {
46 	{
47 		.name = "sc27xx-wdt",
48 		.of_compatible = "sprd,sc2731-wdt",
49 	}, {
50 		.name = "sc27xx-rtc",
51 		.of_compatible = "sprd,sc2731-rtc",
52 	}, {
53 		.name = "sc27xx-charger",
54 		.of_compatible = "sprd,sc2731-charger",
55 	}, {
56 		.name = "sc27xx-chg-timer",
57 		.of_compatible = "sprd,sc2731-chg-timer",
58 	}, {
59 		.name = "sc27xx-fast-chg",
60 		.of_compatible = "sprd,sc2731-fast-chg",
61 	}, {
62 		.name = "sc27xx-chg-wdt",
63 		.of_compatible = "sprd,sc2731-chg-wdt",
64 	}, {
65 		.name = "sc27xx-typec",
66 		.of_compatible = "sprd,sc2731-typec",
67 	}, {
68 		.name = "sc27xx-flash",
69 		.of_compatible = "sprd,sc2731-flash",
70 	}, {
71 		.name = "sc27xx-eic",
72 		.of_compatible = "sprd,sc2731-eic",
73 	}, {
74 		.name = "sc27xx-efuse",
75 		.of_compatible = "sprd,sc2731-efuse",
76 	}, {
77 		.name = "sc27xx-thermal",
78 		.of_compatible = "sprd,sc2731-thermal",
79 	}, {
80 		.name = "sc27xx-adc",
81 		.of_compatible = "sprd,sc2731-adc",
82 	}, {
83 		.name = "sc27xx-audio-codec",
84 		.of_compatible = "sprd,sc2731-audio-codec",
85 	}, {
86 		.name = "sc27xx-regulator",
87 		.of_compatible = "sprd,sc2731-regulator",
88 	}, {
89 		.name = "sc27xx-vibrator",
90 		.of_compatible = "sprd,sc2731-vibrator",
91 	}, {
92 		.name = "sc27xx-keypad-led",
93 		.of_compatible = "sprd,sc2731-keypad-led",
94 	}, {
95 		.name = "sc27xx-bltc",
96 		.of_compatible = "sprd,sc2731-bltc",
97 	}, {
98 		.name = "sc27xx-fgu",
99 		.of_compatible = "sprd,sc2731-fgu",
100 	}, {
101 		.name = "sc27xx-7sreset",
102 		.of_compatible = "sprd,sc2731-7sreset",
103 	}, {
104 		.name = "sc27xx-poweroff",
105 		.of_compatible = "sprd,sc2731-poweroff",
106 	}, {
107 		.name = "sc27xx-syscon",
108 		.of_compatible = "sprd,sc2731-syscon",
109 	},
110 };
111 
112 static int sprd_pmic_spi_write(void *context, const void *data, size_t count)
113 {
114 	struct device *dev = context;
115 	struct spi_device *spi = to_spi_device(dev);
116 
117 	return spi_write(spi, data, count);
118 }
119 
120 static int sprd_pmic_spi_read(void *context,
121 			      const void *reg, size_t reg_size,
122 			      void *val, size_t val_size)
123 {
124 	struct device *dev = context;
125 	struct spi_device *spi = to_spi_device(dev);
126 	u32 rx_buf[2] = { 0 };
127 	int ret;
128 
129 	/* Now we only support one PMIC register to read every time. */
130 	if (reg_size != sizeof(u32) || val_size != sizeof(u32))
131 		return -EINVAL;
132 
133 	/* Copy address to read from into first element of SPI buffer. */
134 	memcpy(rx_buf, reg, sizeof(u32));
135 	ret = spi_read(spi, rx_buf, 1);
136 	if (ret < 0)
137 		return ret;
138 
139 	memcpy(val, rx_buf, val_size);
140 	return 0;
141 }
142 
143 static struct regmap_bus sprd_pmic_regmap = {
144 	.write = sprd_pmic_spi_write,
145 	.read = sprd_pmic_spi_read,
146 	.reg_format_endian_default = REGMAP_ENDIAN_NATIVE,
147 	.val_format_endian_default = REGMAP_ENDIAN_NATIVE,
148 };
149 
150 static const struct regmap_config sprd_pmic_config = {
151 	.reg_bits = 32,
152 	.val_bits = 32,
153 	.reg_stride = 4,
154 	.max_register = 0xffff,
155 };
156 
157 static int sprd_pmic_probe(struct spi_device *spi)
158 {
159 	struct sprd_pmic *ddata;
160 	const struct sprd_pmic_data *pdata;
161 	int ret, i;
162 
163 	pdata = of_device_get_match_data(&spi->dev);
164 	if (!pdata) {
165 		dev_err(&spi->dev, "No matching driver data found\n");
166 		return -EINVAL;
167 	}
168 
169 	ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
170 	if (!ddata)
171 		return -ENOMEM;
172 
173 	ddata->regmap = devm_regmap_init(&spi->dev, &sprd_pmic_regmap,
174 					 &spi->dev, &sprd_pmic_config);
175 	if (IS_ERR(ddata->regmap)) {
176 		ret = PTR_ERR(ddata->regmap);
177 		dev_err(&spi->dev, "Failed to allocate register map %d\n", ret);
178 		return ret;
179 	}
180 
181 	spi_set_drvdata(spi, ddata);
182 	ddata->dev = &spi->dev;
183 	ddata->irq = spi->irq;
184 
185 	ddata->irq_chip.name = dev_name(&spi->dev);
186 	ddata->irq_chip.status_base =
187 		pdata->irq_base + SPRD_PMIC_INT_MASK_STATUS;
188 	ddata->irq_chip.mask_base = pdata->irq_base + SPRD_PMIC_INT_EN;
189 	ddata->irq_chip.ack_base = 0;
190 	ddata->irq_chip.num_regs = 1;
191 	ddata->irq_chip.num_irqs = pdata->num_irqs;
192 	ddata->irq_chip.mask_invert = true;
193 
194 	ddata->irqs = devm_kcalloc(&spi->dev,
195 				   pdata->num_irqs, sizeof(struct regmap_irq),
196 				   GFP_KERNEL);
197 	if (!ddata->irqs)
198 		return -ENOMEM;
199 
200 	ddata->irq_chip.irqs = ddata->irqs;
201 	for (i = 0; i < pdata->num_irqs; i++) {
202 		ddata->irqs[i].reg_offset = i / pdata->num_irqs;
203 		ddata->irqs[i].mask = BIT(i % pdata->num_irqs);
204 	}
205 
206 	ret = devm_regmap_add_irq_chip(&spi->dev, ddata->regmap, ddata->irq,
207 				       IRQF_ONESHOT | IRQF_NO_SUSPEND, 0,
208 				       &ddata->irq_chip, &ddata->irq_data);
209 	if (ret) {
210 		dev_err(&spi->dev, "Failed to add PMIC irq chip %d\n", ret);
211 		return ret;
212 	}
213 
214 	ret = devm_mfd_add_devices(&spi->dev, PLATFORM_DEVID_AUTO,
215 				   sprd_pmic_devs, ARRAY_SIZE(sprd_pmic_devs),
216 				   NULL, 0,
217 				   regmap_irq_get_domain(ddata->irq_data));
218 	if (ret) {
219 		dev_err(&spi->dev, "Failed to register device %d\n", ret);
220 		return ret;
221 	}
222 
223 	return 0;
224 }
225 
226 static const struct of_device_id sprd_pmic_match[] = {
227 	{ .compatible = "sprd,sc2731", .data = &sc2731_data },
228 	{},
229 };
230 MODULE_DEVICE_TABLE(of, sprd_pmic_match);
231 
232 static struct spi_driver sprd_pmic_driver = {
233 	.driver = {
234 		.name = "sc27xx-pmic",
235 		.bus = &spi_bus_type,
236 		.of_match_table = sprd_pmic_match,
237 	},
238 	.probe = sprd_pmic_probe,
239 };
240 
241 static int __init sprd_pmic_init(void)
242 {
243 	return spi_register_driver(&sprd_pmic_driver);
244 }
245 subsys_initcall(sprd_pmic_init);
246 
247 static void __exit sprd_pmic_exit(void)
248 {
249 	spi_unregister_driver(&sprd_pmic_driver);
250 }
251 module_exit(sprd_pmic_exit);
252 
253 MODULE_LICENSE("GPL v2");
254 MODULE_DESCRIPTION("Spreadtrum SC27xx PMICs driver");
255 MODULE_AUTHOR("Baolin Wang <baolin.wang@spreadtrum.com>");
256