xref: /openbmc/linux/drivers/mfd/rc5t583.c (revision 703e7713)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Core driver access RC5T583 power management chip.
4  *
5  * Copyright (c) 2011-2012, NVIDIA CORPORATION.  All rights reserved.
6  * Author: Laxman dewangan <ldewangan@nvidia.com>
7  *
8  * Based on code
9  *	Copyright (C) 2011 RICOH COMPANY,LTD
10  */
11 #include <linux/interrupt.h>
12 #include <linux/irq.h>
13 #include <linux/kernel.h>
14 #include <linux/init.h>
15 #include <linux/err.h>
16 #include <linux/slab.h>
17 #include <linux/i2c.h>
18 #include <linux/mfd/core.h>
19 #include <linux/mfd/rc5t583.h>
20 #include <linux/regmap.h>
21 
22 #define RICOH_ONOFFSEL_REG	0x10
23 #define RICOH_SWCTL_REG		0x5E
24 
25 struct deepsleep_control_data {
26 	u8 reg_add;
27 	u8 ds_pos_bit;
28 };
29 
30 #define DEEPSLEEP_INIT(_id, _reg, _pos)		\
31 	{					\
32 		.reg_add = RC5T583_##_reg,	\
33 		.ds_pos_bit = _pos,		\
34 	}
35 
36 static struct deepsleep_control_data deepsleep_data[] = {
37 	DEEPSLEEP_INIT(DC0, SLPSEQ1, 0),
38 	DEEPSLEEP_INIT(DC1, SLPSEQ1, 4),
39 	DEEPSLEEP_INIT(DC2, SLPSEQ2, 0),
40 	DEEPSLEEP_INIT(DC3, SLPSEQ2, 4),
41 	DEEPSLEEP_INIT(LDO0, SLPSEQ3, 0),
42 	DEEPSLEEP_INIT(LDO1, SLPSEQ3, 4),
43 	DEEPSLEEP_INIT(LDO2, SLPSEQ4, 0),
44 	DEEPSLEEP_INIT(LDO3, SLPSEQ4, 4),
45 	DEEPSLEEP_INIT(LDO4, SLPSEQ5, 0),
46 	DEEPSLEEP_INIT(LDO5, SLPSEQ5, 4),
47 	DEEPSLEEP_INIT(LDO6, SLPSEQ6, 0),
48 	DEEPSLEEP_INIT(LDO7, SLPSEQ6, 4),
49 	DEEPSLEEP_INIT(LDO8, SLPSEQ7, 0),
50 	DEEPSLEEP_INIT(LDO9, SLPSEQ7, 4),
51 	DEEPSLEEP_INIT(PSO0, SLPSEQ8, 0),
52 	DEEPSLEEP_INIT(PSO1, SLPSEQ8, 4),
53 	DEEPSLEEP_INIT(PSO2, SLPSEQ9, 0),
54 	DEEPSLEEP_INIT(PSO3, SLPSEQ9, 4),
55 	DEEPSLEEP_INIT(PSO4, SLPSEQ10, 0),
56 	DEEPSLEEP_INIT(PSO5, SLPSEQ10, 4),
57 	DEEPSLEEP_INIT(PSO6, SLPSEQ11, 0),
58 	DEEPSLEEP_INIT(PSO7, SLPSEQ11, 4),
59 };
60 
61 #define EXT_PWR_REQ		\
62 	(RC5T583_EXT_PWRREQ1_CONTROL | RC5T583_EXT_PWRREQ2_CONTROL)
63 
64 static const struct mfd_cell rc5t583_subdevs[] = {
65 	{.name = "rc5t583-gpio",},
66 	{.name = "rc5t583-regulator",},
67 	{.name = "rc5t583-rtc",      },
68 	{.name = "rc5t583-key",      }
69 };
70 
71 static int __rc5t583_set_ext_pwrreq1_control(struct device *dev,
72 	int id, int ext_pwr, int slots)
73 {
74 	int ret;
75 	uint8_t sleepseq_val = 0;
76 	unsigned int en_bit;
77 	unsigned int slot_bit;
78 
79 	if (id == RC5T583_DS_DC0) {
80 		dev_err(dev, "PWRREQ1 is invalid control for rail %d\n", id);
81 		return -EINVAL;
82 	}
83 
84 	en_bit = deepsleep_data[id].ds_pos_bit;
85 	slot_bit = en_bit + 1;
86 	ret = rc5t583_read(dev, deepsleep_data[id].reg_add, &sleepseq_val);
87 	if (ret < 0) {
88 		dev_err(dev, "Error in reading reg 0x%x\n",
89 				deepsleep_data[id].reg_add);
90 		return ret;
91 	}
92 
93 	sleepseq_val &= ~(0xF << en_bit);
94 	sleepseq_val |= BIT(en_bit);
95 	sleepseq_val |= ((slots & 0x7) << slot_bit);
96 	ret = rc5t583_set_bits(dev, RICOH_ONOFFSEL_REG, BIT(1));
97 	if (ret < 0) {
98 		dev_err(dev, "Error in updating the 0x%02x register\n",
99 				RICOH_ONOFFSEL_REG);
100 		return ret;
101 	}
102 
103 	ret = rc5t583_write(dev, deepsleep_data[id].reg_add, sleepseq_val);
104 	if (ret < 0) {
105 		dev_err(dev, "Error in writing reg 0x%x\n",
106 				deepsleep_data[id].reg_add);
107 		return ret;
108 	}
109 
110 	if (id == RC5T583_DS_LDO4) {
111 		ret = rc5t583_write(dev, RICOH_SWCTL_REG, 0x1);
112 		if (ret < 0)
113 			dev_err(dev, "Error in writing reg 0x%x\n",
114 				RICOH_SWCTL_REG);
115 	}
116 	return ret;
117 }
118 
119 static int __rc5t583_set_ext_pwrreq2_control(struct device *dev,
120 	int id, int ext_pwr)
121 {
122 	int ret;
123 
124 	if (id != RC5T583_DS_DC0) {
125 		dev_err(dev, "PWRREQ2 is invalid control for rail %d\n", id);
126 		return -EINVAL;
127 	}
128 
129 	ret = rc5t583_set_bits(dev, RICOH_ONOFFSEL_REG, BIT(2));
130 	if (ret < 0)
131 		dev_err(dev, "Error in updating the ONOFFSEL 0x10 register\n");
132 	return ret;
133 }
134 
135 int rc5t583_ext_power_req_config(struct device *dev, int ds_id,
136 	int ext_pwr_req, int deepsleep_slot_nr)
137 {
138 	if ((ext_pwr_req & EXT_PWR_REQ) == EXT_PWR_REQ)
139 		return -EINVAL;
140 
141 	if (ext_pwr_req & RC5T583_EXT_PWRREQ1_CONTROL)
142 		return __rc5t583_set_ext_pwrreq1_control(dev, ds_id,
143 				ext_pwr_req, deepsleep_slot_nr);
144 
145 	if (ext_pwr_req & RC5T583_EXT_PWRREQ2_CONTROL)
146 		return __rc5t583_set_ext_pwrreq2_control(dev,
147 			ds_id, ext_pwr_req);
148 	return 0;
149 }
150 EXPORT_SYMBOL(rc5t583_ext_power_req_config);
151 
152 static int rc5t583_clear_ext_power_req(struct rc5t583 *rc5t583,
153 	struct rc5t583_platform_data *pdata)
154 {
155 	int ret;
156 	int i;
157 	uint8_t on_off_val = 0;
158 
159 	/*  Clear ONOFFSEL register */
160 	if (pdata->enable_shutdown)
161 		on_off_val = 0x1;
162 
163 	ret = rc5t583_write(rc5t583->dev, RICOH_ONOFFSEL_REG, on_off_val);
164 	if (ret < 0)
165 		dev_warn(rc5t583->dev, "Error in writing reg %d error: %d\n",
166 					RICOH_ONOFFSEL_REG, ret);
167 
168 	ret = rc5t583_write(rc5t583->dev, RICOH_SWCTL_REG, 0x0);
169 	if (ret < 0)
170 		dev_warn(rc5t583->dev, "Error in writing reg %d error: %d\n",
171 					RICOH_SWCTL_REG, ret);
172 
173 	/* Clear sleep sequence register */
174 	for (i = RC5T583_SLPSEQ1; i <= RC5T583_SLPSEQ11; ++i) {
175 		ret = rc5t583_write(rc5t583->dev, i, 0x0);
176 		if (ret < 0)
177 			dev_warn(rc5t583->dev,
178 				"Error in writing reg 0x%02x error: %d\n",
179 				i, ret);
180 	}
181 	return 0;
182 }
183 
184 static bool volatile_reg(struct device *dev, unsigned int reg)
185 {
186 	/* Enable caching in interrupt registers */
187 	switch (reg) {
188 	case RC5T583_INT_EN_SYS1:
189 	case RC5T583_INT_EN_SYS2:
190 	case RC5T583_INT_EN_DCDC:
191 	case RC5T583_INT_EN_RTC:
192 	case RC5T583_INT_EN_ADC1:
193 	case RC5T583_INT_EN_ADC2:
194 	case RC5T583_INT_EN_ADC3:
195 	case RC5T583_GPIO_GPEDGE1:
196 	case RC5T583_GPIO_GPEDGE2:
197 	case RC5T583_GPIO_EN_INT:
198 		return false;
199 
200 	case RC5T583_GPIO_MON_IOIN:
201 		/* This is gpio input register */
202 		return true;
203 
204 	default:
205 		/* Enable caching in gpio registers */
206 		if ((reg >= RC5T583_GPIO_IOSEL) &&
207 				(reg <= RC5T583_GPIO_GPOFUNC))
208 			return false;
209 
210 		/* Enable caching in sleep seq registers */
211 		if ((reg >= RC5T583_SLPSEQ1) && (reg <= RC5T583_SLPSEQ11))
212 			return false;
213 
214 		/* Enable caching of regulator registers */
215 		if ((reg >= RC5T583_REG_DC0CTL) && (reg <= RC5T583_REG_SR3CTL))
216 			return false;
217 		if ((reg >= RC5T583_REG_LDOEN1) &&
218 					(reg <= RC5T583_REG_LDO9DAC_DS))
219 			return false;
220 
221 		break;
222 	}
223 
224 	return true;
225 }
226 
227 static const struct regmap_config rc5t583_regmap_config = {
228 	.reg_bits = 8,
229 	.val_bits = 8,
230 	.volatile_reg = volatile_reg,
231 	.max_register = RC5T583_MAX_REG,
232 	.num_reg_defaults_raw = RC5T583_NUM_REGS,
233 	.cache_type = REGCACHE_RBTREE,
234 };
235 
236 static int rc5t583_i2c_probe(struct i2c_client *i2c)
237 {
238 	struct rc5t583 *rc5t583;
239 	struct rc5t583_platform_data *pdata = dev_get_platdata(&i2c->dev);
240 	int ret;
241 
242 	if (!pdata) {
243 		dev_err(&i2c->dev, "Err: Platform data not found\n");
244 		return -EINVAL;
245 	}
246 
247 	rc5t583 = devm_kzalloc(&i2c->dev, sizeof(*rc5t583), GFP_KERNEL);
248 	if (!rc5t583)
249 		return -ENOMEM;
250 
251 	rc5t583->dev = &i2c->dev;
252 	i2c_set_clientdata(i2c, rc5t583);
253 
254 	rc5t583->regmap = devm_regmap_init_i2c(i2c, &rc5t583_regmap_config);
255 	if (IS_ERR(rc5t583->regmap)) {
256 		ret = PTR_ERR(rc5t583->regmap);
257 		dev_err(&i2c->dev, "regmap initialization failed: %d\n", ret);
258 		return ret;
259 	}
260 
261 	ret = rc5t583_clear_ext_power_req(rc5t583, pdata);
262 	if (ret < 0)
263 		return ret;
264 
265 	if (i2c->irq) {
266 		ret = rc5t583_irq_init(rc5t583, i2c->irq, pdata->irq_base);
267 		/* Still continue with warning, if irq init fails */
268 		if (ret)
269 			dev_warn(&i2c->dev, "IRQ init failed: %d\n", ret);
270 	}
271 
272 	ret = devm_mfd_add_devices(rc5t583->dev, -1, rc5t583_subdevs,
273 				   ARRAY_SIZE(rc5t583_subdevs), NULL, 0, NULL);
274 	if (ret) {
275 		dev_err(&i2c->dev, "add mfd devices failed: %d\n", ret);
276 		return ret;
277 	}
278 
279 	return 0;
280 }
281 
282 static const struct i2c_device_id rc5t583_i2c_id[] = {
283 	{.name = "rc5t583", .driver_data = 0},
284 	{}
285 };
286 
287 static struct i2c_driver rc5t583_i2c_driver = {
288 	.driver = {
289 		   .name = "rc5t583",
290 		   },
291 	.probe = rc5t583_i2c_probe,
292 	.id_table = rc5t583_i2c_id,
293 };
294 
295 static int __init rc5t583_i2c_init(void)
296 {
297 	return i2c_add_driver(&rc5t583_i2c_driver);
298 }
299 subsys_initcall(rc5t583_i2c_init);
300