1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (c) 2021, The Linux Foundation. All rights reserved. 4 */ 5 6 #include <linux/bitops.h> 7 #include <linux/i2c.h> 8 #include <linux/interrupt.h> 9 #include <linux/irq.h> 10 #include <linux/irqdomain.h> 11 #include <linux/module.h> 12 #include <linux/of_device.h> 13 #include <linux/of_platform.h> 14 #include <linux/pinctrl/consumer.h> 15 #include <linux/regmap.h> 16 #include <linux/slab.h> 17 18 #include <dt-bindings/mfd/qcom-pm8008.h> 19 20 #define I2C_INTR_STATUS_BASE 0x0550 21 #define INT_RT_STS_OFFSET 0x10 22 #define INT_SET_TYPE_OFFSET 0x11 23 #define INT_POL_HIGH_OFFSET 0x12 24 #define INT_POL_LOW_OFFSET 0x13 25 #define INT_LATCHED_CLR_OFFSET 0x14 26 #define INT_EN_SET_OFFSET 0x15 27 #define INT_EN_CLR_OFFSET 0x16 28 #define INT_LATCHED_STS_OFFSET 0x18 29 30 enum { 31 PM8008_MISC, 32 PM8008_TEMP_ALARM, 33 PM8008_GPIO1, 34 PM8008_GPIO2, 35 PM8008_NUM_PERIPHS, 36 }; 37 38 #define PM8008_PERIPH_0_BASE 0x900 39 #define PM8008_PERIPH_1_BASE 0x2400 40 #define PM8008_PERIPH_2_BASE 0xC000 41 #define PM8008_PERIPH_3_BASE 0xC100 42 43 #define PM8008_TEMP_ALARM_ADDR PM8008_PERIPH_1_BASE 44 #define PM8008_GPIO1_ADDR PM8008_PERIPH_2_BASE 45 #define PM8008_GPIO2_ADDR PM8008_PERIPH_3_BASE 46 47 enum { 48 SET_TYPE_INDEX, 49 POLARITY_HI_INDEX, 50 POLARITY_LO_INDEX, 51 }; 52 53 static unsigned int pm8008_config_regs[] = { 54 INT_SET_TYPE_OFFSET, 55 INT_POL_HIGH_OFFSET, 56 INT_POL_LOW_OFFSET, 57 }; 58 59 static struct regmap_irq pm8008_irqs[] = { 60 REGMAP_IRQ_REG(PM8008_IRQ_MISC_UVLO, PM8008_MISC, BIT(0)), 61 REGMAP_IRQ_REG(PM8008_IRQ_MISC_OVLO, PM8008_MISC, BIT(1)), 62 REGMAP_IRQ_REG(PM8008_IRQ_MISC_OTST2, PM8008_MISC, BIT(2)), 63 REGMAP_IRQ_REG(PM8008_IRQ_MISC_OTST3, PM8008_MISC, BIT(3)), 64 REGMAP_IRQ_REG(PM8008_IRQ_MISC_LDO_OCP, PM8008_MISC, BIT(4)), 65 REGMAP_IRQ_REG(PM8008_IRQ_TEMP_ALARM, PM8008_TEMP_ALARM, BIT(0)), 66 REGMAP_IRQ_REG(PM8008_IRQ_GPIO1, PM8008_GPIO1, BIT(0)), 67 REGMAP_IRQ_REG(PM8008_IRQ_GPIO2, PM8008_GPIO2, BIT(0)), 68 }; 69 70 static const unsigned int pm8008_periph_base[] = { 71 PM8008_PERIPH_0_BASE, 72 PM8008_PERIPH_1_BASE, 73 PM8008_PERIPH_2_BASE, 74 PM8008_PERIPH_3_BASE, 75 }; 76 77 static unsigned int pm8008_get_irq_reg(struct regmap_irq_chip_data *data, 78 unsigned int base, int index) 79 { 80 /* Simple linear addressing for the main status register */ 81 if (base == I2C_INTR_STATUS_BASE) 82 return base + index; 83 84 return pm8008_periph_base[index] + base; 85 } 86 87 static int pm8008_set_type_config(unsigned int **buf, unsigned int type, 88 const struct regmap_irq *irq_data, int idx, 89 void *irq_drv_data) 90 { 91 switch (type) { 92 case IRQ_TYPE_EDGE_FALLING: 93 case IRQ_TYPE_LEVEL_LOW: 94 buf[POLARITY_HI_INDEX][idx] &= ~irq_data->mask; 95 buf[POLARITY_LO_INDEX][idx] |= irq_data->mask; 96 break; 97 98 case IRQ_TYPE_EDGE_RISING: 99 case IRQ_TYPE_LEVEL_HIGH: 100 buf[POLARITY_HI_INDEX][idx] |= irq_data->mask; 101 buf[POLARITY_LO_INDEX][idx] &= ~irq_data->mask; 102 break; 103 104 case IRQ_TYPE_EDGE_BOTH: 105 buf[POLARITY_HI_INDEX][idx] |= irq_data->mask; 106 buf[POLARITY_LO_INDEX][idx] |= irq_data->mask; 107 break; 108 109 default: 110 return -EINVAL; 111 } 112 113 if (type & IRQ_TYPE_EDGE_BOTH) 114 buf[SET_TYPE_INDEX][idx] |= irq_data->mask; 115 else 116 buf[SET_TYPE_INDEX][idx] &= ~irq_data->mask; 117 118 return 0; 119 } 120 121 static struct regmap_irq_chip pm8008_irq_chip = { 122 .name = "pm8008_irq", 123 .main_status = I2C_INTR_STATUS_BASE, 124 .num_main_regs = 1, 125 .irqs = pm8008_irqs, 126 .num_irqs = ARRAY_SIZE(pm8008_irqs), 127 .num_regs = PM8008_NUM_PERIPHS, 128 .status_base = INT_LATCHED_STS_OFFSET, 129 .mask_base = INT_EN_CLR_OFFSET, 130 .unmask_base = INT_EN_SET_OFFSET, 131 .mask_unmask_non_inverted = true, 132 .ack_base = INT_LATCHED_CLR_OFFSET, 133 .config_base = pm8008_config_regs, 134 .num_config_bases = ARRAY_SIZE(pm8008_config_regs), 135 .num_config_regs = PM8008_NUM_PERIPHS, 136 .set_type_config = pm8008_set_type_config, 137 .get_irq_reg = pm8008_get_irq_reg, 138 }; 139 140 static struct regmap_config qcom_mfd_regmap_cfg = { 141 .reg_bits = 16, 142 .val_bits = 8, 143 .max_register = 0xFFFF, 144 }; 145 146 static int pm8008_probe_irq_peripherals(struct device *dev, 147 struct regmap *regmap, 148 int client_irq) 149 { 150 int rc, i; 151 struct regmap_irq_type *type; 152 struct regmap_irq_chip_data *irq_data; 153 154 for (i = 0; i < ARRAY_SIZE(pm8008_irqs); i++) { 155 type = &pm8008_irqs[i].type; 156 157 type->type_reg_offset = pm8008_irqs[i].reg_offset; 158 159 if (type->type_reg_offset == PM8008_MISC) 160 type->types_supported = IRQ_TYPE_EDGE_RISING; 161 else 162 type->types_supported = (IRQ_TYPE_EDGE_BOTH | 163 IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW); 164 } 165 166 rc = devm_regmap_add_irq_chip(dev, regmap, client_irq, 167 IRQF_SHARED, 0, &pm8008_irq_chip, &irq_data); 168 if (rc) { 169 dev_err(dev, "Failed to add IRQ chip: %d\n", rc); 170 return rc; 171 } 172 173 return 0; 174 } 175 176 static int pm8008_probe(struct i2c_client *client) 177 { 178 int rc; 179 struct device *dev; 180 struct regmap *regmap; 181 182 dev = &client->dev; 183 regmap = devm_regmap_init_i2c(client, &qcom_mfd_regmap_cfg); 184 if (IS_ERR(regmap)) 185 return PTR_ERR(regmap); 186 187 i2c_set_clientdata(client, regmap); 188 189 if (of_property_read_bool(dev->of_node, "interrupt-controller")) { 190 rc = pm8008_probe_irq_peripherals(dev, regmap, client->irq); 191 if (rc) 192 dev_err(dev, "Failed to probe irq periphs: %d\n", rc); 193 } 194 195 return devm_of_platform_populate(dev); 196 } 197 198 static const struct of_device_id pm8008_match[] = { 199 { .compatible = "qcom,pm8008", }, 200 { }, 201 }; 202 203 static struct i2c_driver pm8008_mfd_driver = { 204 .driver = { 205 .name = "pm8008", 206 .of_match_table = pm8008_match, 207 }, 208 .probe_new = pm8008_probe, 209 }; 210 module_i2c_driver(pm8008_mfd_driver); 211 212 MODULE_LICENSE("GPL v2"); 213 MODULE_ALIAS("i2c:qcom-pm8008"); 214