1 /** 2 * omap-usb-tll.c - The USB TLL driver for OMAP EHCI & OHCI 3 * 4 * Copyright (C) 2012-2013 Texas Instruments Incorporated - http://www.ti.com 5 * Author: Keshava Munegowda <keshava_mgowda@ti.com> 6 * Author: Roger Quadros <rogerq@ti.com> 7 * 8 * This program is free software: you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License version 2 of 10 * the License as published by the Free Software Foundation. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program. If not, see <http://www.gnu.org/licenses/>. 19 */ 20 #include <linux/kernel.h> 21 #include <linux/module.h> 22 #include <linux/types.h> 23 #include <linux/slab.h> 24 #include <linux/spinlock.h> 25 #include <linux/platform_device.h> 26 #include <linux/clk.h> 27 #include <linux/io.h> 28 #include <linux/err.h> 29 #include <linux/pm_runtime.h> 30 #include <linux/platform_data/usb-omap.h> 31 #include <linux/of.h> 32 33 #include "omap-usb.h" 34 35 #define USBTLL_DRIVER_NAME "usbhs_tll" 36 37 /* TLL Register Set */ 38 #define OMAP_USBTLL_REVISION (0x00) 39 #define OMAP_USBTLL_SYSCONFIG (0x10) 40 #define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8) 41 #define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3) 42 #define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2) 43 #define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1) 44 #define OMAP_USBTLL_SYSCONFIG_AUTOIDLE (1 << 0) 45 46 #define OMAP_USBTLL_SYSSTATUS (0x14) 47 #define OMAP_USBTLL_SYSSTATUS_RESETDONE (1 << 0) 48 49 #define OMAP_USBTLL_IRQSTATUS (0x18) 50 #define OMAP_USBTLL_IRQENABLE (0x1C) 51 52 #define OMAP_TLL_SHARED_CONF (0x30) 53 #define OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN (1 << 6) 54 #define OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN (1 << 5) 55 #define OMAP_TLL_SHARED_CONF_USB_DIVRATION (1 << 2) 56 #define OMAP_TLL_SHARED_CONF_FCLK_REQ (1 << 1) 57 #define OMAP_TLL_SHARED_CONF_FCLK_IS_ON (1 << 0) 58 59 #define OMAP_TLL_CHANNEL_CONF(num) (0x040 + 0x004 * num) 60 #define OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT 24 61 #define OMAP_TLL_CHANNEL_CONF_DRVVBUS (1 << 16) 62 #define OMAP_TLL_CHANNEL_CONF_CHRGVBUS (1 << 15) 63 #define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF (1 << 11) 64 #define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE (1 << 10) 65 #define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE (1 << 9) 66 #define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE (1 << 8) 67 #define OMAP_TLL_CHANNEL_CONF_MODE_TRANSPARENT_UTMI (2 << 1) 68 #define OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS (1 << 1) 69 #define OMAP_TLL_CHANNEL_CONF_CHANEN (1 << 0) 70 71 #define OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0 0x0 72 #define OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM 0x1 73 #define OMAP_TLL_FSLSMODE_3PIN_PHY 0x2 74 #define OMAP_TLL_FSLSMODE_4PIN_PHY 0x3 75 #define OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0 0x4 76 #define OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM 0x5 77 #define OMAP_TLL_FSLSMODE_3PIN_TLL 0x6 78 #define OMAP_TLL_FSLSMODE_4PIN_TLL 0x7 79 #define OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0 0xA 80 #define OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM 0xB 81 82 #define OMAP_TLL_ULPI_FUNCTION_CTRL(num) (0x804 + 0x100 * num) 83 #define OMAP_TLL_ULPI_INTERFACE_CTRL(num) (0x807 + 0x100 * num) 84 #define OMAP_TLL_ULPI_OTG_CTRL(num) (0x80A + 0x100 * num) 85 #define OMAP_TLL_ULPI_INT_EN_RISE(num) (0x80D + 0x100 * num) 86 #define OMAP_TLL_ULPI_INT_EN_FALL(num) (0x810 + 0x100 * num) 87 #define OMAP_TLL_ULPI_INT_STATUS(num) (0x813 + 0x100 * num) 88 #define OMAP_TLL_ULPI_INT_LATCH(num) (0x814 + 0x100 * num) 89 #define OMAP_TLL_ULPI_DEBUG(num) (0x815 + 0x100 * num) 90 #define OMAP_TLL_ULPI_SCRATCH_REGISTER(num) (0x816 + 0x100 * num) 91 92 #define OMAP_REV2_TLL_CHANNEL_COUNT 2 93 #define OMAP_TLL_CHANNEL_COUNT 3 94 #define OMAP_TLL_CHANNEL_1_EN_MASK (1 << 0) 95 #define OMAP_TLL_CHANNEL_2_EN_MASK (1 << 1) 96 #define OMAP_TLL_CHANNEL_3_EN_MASK (1 << 2) 97 98 /* Values of USBTLL_REVISION - Note: these are not given in the TRM */ 99 #define OMAP_USBTLL_REV1 0x00000015 /* OMAP3 */ 100 #define OMAP_USBTLL_REV2 0x00000018 /* OMAP 3630 */ 101 #define OMAP_USBTLL_REV3 0x00000004 /* OMAP4 */ 102 #define OMAP_USBTLL_REV4 0x00000006 /* OMAP5 */ 103 104 #define is_ehci_tll_mode(x) (x == OMAP_EHCI_PORT_MODE_TLL) 105 106 /* only PHY and UNUSED modes don't need TLL */ 107 #define omap_usb_mode_needs_tll(x) ((x) != OMAP_USBHS_PORT_MODE_UNUSED &&\ 108 (x) != OMAP_EHCI_PORT_MODE_PHY) 109 110 struct usbtll_omap { 111 int nch; /* num. of channels */ 112 struct clk **ch_clk; 113 void __iomem *base; 114 }; 115 116 /*-------------------------------------------------------------------------*/ 117 118 static const char usbtll_driver_name[] = USBTLL_DRIVER_NAME; 119 static struct device *tll_dev; 120 static DEFINE_SPINLOCK(tll_lock); /* serialize access to tll_dev */ 121 122 /*-------------------------------------------------------------------------*/ 123 124 static inline void usbtll_write(void __iomem *base, u32 reg, u32 val) 125 { 126 writel_relaxed(val, base + reg); 127 } 128 129 static inline u32 usbtll_read(void __iomem *base, u32 reg) 130 { 131 return readl_relaxed(base + reg); 132 } 133 134 static inline void usbtll_writeb(void __iomem *base, u8 reg, u8 val) 135 { 136 writeb_relaxed(val, base + reg); 137 } 138 139 static inline u8 usbtll_readb(void __iomem *base, u8 reg) 140 { 141 return readb_relaxed(base + reg); 142 } 143 144 /*-------------------------------------------------------------------------*/ 145 146 static bool is_ohci_port(enum usbhs_omap_port_mode pmode) 147 { 148 switch (pmode) { 149 case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: 150 case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: 151 case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: 152 case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: 153 case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: 154 case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: 155 case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: 156 case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: 157 case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: 158 case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: 159 return true; 160 161 default: 162 return false; 163 } 164 } 165 166 /* 167 * convert the port-mode enum to a value we can use in the FSLSMODE 168 * field of USBTLL_CHANNEL_CONF 169 */ 170 static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode) 171 { 172 switch (mode) { 173 case OMAP_USBHS_PORT_MODE_UNUSED: 174 case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: 175 return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0; 176 177 case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: 178 return OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM; 179 180 case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: 181 return OMAP_TLL_FSLSMODE_3PIN_PHY; 182 183 case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: 184 return OMAP_TLL_FSLSMODE_4PIN_PHY; 185 186 case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: 187 return OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0; 188 189 case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: 190 return OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM; 191 192 case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: 193 return OMAP_TLL_FSLSMODE_3PIN_TLL; 194 195 case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: 196 return OMAP_TLL_FSLSMODE_4PIN_TLL; 197 198 case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: 199 return OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0; 200 201 case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: 202 return OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM; 203 default: 204 pr_warn("Invalid port mode, using default\n"); 205 return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0; 206 } 207 } 208 209 /** 210 * usbtll_omap_probe - initialize TI-based HCDs 211 * 212 * Allocates basic resources for this USB host controller. 213 */ 214 static int usbtll_omap_probe(struct platform_device *pdev) 215 { 216 struct device *dev = &pdev->dev; 217 struct resource *res; 218 struct usbtll_omap *tll; 219 int ret = 0; 220 int i, ver; 221 222 dev_dbg(dev, "starting TI HSUSB TLL Controller\n"); 223 224 tll = devm_kzalloc(dev, sizeof(struct usbtll_omap), GFP_KERNEL); 225 if (!tll) { 226 dev_err(dev, "Memory allocation failed\n"); 227 return -ENOMEM; 228 } 229 230 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 231 tll->base = devm_ioremap_resource(dev, res); 232 if (IS_ERR(tll->base)) 233 return PTR_ERR(tll->base); 234 235 platform_set_drvdata(pdev, tll); 236 pm_runtime_enable(dev); 237 pm_runtime_get_sync(dev); 238 239 ver = usbtll_read(tll->base, OMAP_USBTLL_REVISION); 240 switch (ver) { 241 case OMAP_USBTLL_REV1: 242 case OMAP_USBTLL_REV4: 243 tll->nch = OMAP_TLL_CHANNEL_COUNT; 244 break; 245 case OMAP_USBTLL_REV2: 246 case OMAP_USBTLL_REV3: 247 tll->nch = OMAP_REV2_TLL_CHANNEL_COUNT; 248 break; 249 default: 250 tll->nch = OMAP_TLL_CHANNEL_COUNT; 251 dev_dbg(dev, 252 "USB TLL Rev : 0x%x not recognized, assuming %d channels\n", 253 ver, tll->nch); 254 break; 255 } 256 257 tll->ch_clk = devm_kzalloc(dev, sizeof(struct clk *) * tll->nch, 258 GFP_KERNEL); 259 if (!tll->ch_clk) { 260 ret = -ENOMEM; 261 dev_err(dev, "Couldn't allocate memory for channel clocks\n"); 262 goto err_clk_alloc; 263 } 264 265 for (i = 0; i < tll->nch; i++) { 266 char clkname[] = "usb_tll_hs_usb_chx_clk"; 267 268 snprintf(clkname, sizeof(clkname), 269 "usb_tll_hs_usb_ch%d_clk", i); 270 tll->ch_clk[i] = clk_get(dev, clkname); 271 272 if (IS_ERR(tll->ch_clk[i])) 273 dev_dbg(dev, "can't get clock : %s\n", clkname); 274 else 275 clk_prepare(tll->ch_clk[i]); 276 } 277 278 pm_runtime_put_sync(dev); 279 /* only after this can omap_tll_enable/disable work */ 280 spin_lock(&tll_lock); 281 tll_dev = dev; 282 spin_unlock(&tll_lock); 283 284 return 0; 285 286 err_clk_alloc: 287 pm_runtime_put_sync(dev); 288 pm_runtime_disable(dev); 289 290 return ret; 291 } 292 293 /** 294 * usbtll_omap_remove - shutdown processing for UHH & TLL HCDs 295 * @pdev: USB Host Controller being removed 296 * 297 * Reverses the effect of usbtll_omap_probe(). 298 */ 299 static int usbtll_omap_remove(struct platform_device *pdev) 300 { 301 struct usbtll_omap *tll = platform_get_drvdata(pdev); 302 int i; 303 304 spin_lock(&tll_lock); 305 tll_dev = NULL; 306 spin_unlock(&tll_lock); 307 308 for (i = 0; i < tll->nch; i++) { 309 if (!IS_ERR(tll->ch_clk[i])) { 310 clk_unprepare(tll->ch_clk[i]); 311 clk_put(tll->ch_clk[i]); 312 } 313 } 314 315 pm_runtime_disable(&pdev->dev); 316 return 0; 317 } 318 319 static const struct of_device_id usbtll_omap_dt_ids[] = { 320 { .compatible = "ti,usbhs-tll" }, 321 { } 322 }; 323 324 MODULE_DEVICE_TABLE(of, usbtll_omap_dt_ids); 325 326 static struct platform_driver usbtll_omap_driver = { 327 .driver = { 328 .name = (char *)usbtll_driver_name, 329 .of_match_table = usbtll_omap_dt_ids, 330 }, 331 .probe = usbtll_omap_probe, 332 .remove = usbtll_omap_remove, 333 }; 334 335 int omap_tll_init(struct usbhs_omap_platform_data *pdata) 336 { 337 int i; 338 bool needs_tll; 339 unsigned reg; 340 struct usbtll_omap *tll; 341 342 if (!tll_dev) 343 return -ENODEV; 344 345 pm_runtime_get_sync(tll_dev); 346 347 spin_lock(&tll_lock); 348 tll = dev_get_drvdata(tll_dev); 349 needs_tll = false; 350 for (i = 0; i < tll->nch; i++) 351 needs_tll |= omap_usb_mode_needs_tll(pdata->port_mode[i]); 352 353 if (needs_tll) { 354 void __iomem *base = tll->base; 355 356 /* Program Common TLL register */ 357 reg = usbtll_read(base, OMAP_TLL_SHARED_CONF); 358 reg |= (OMAP_TLL_SHARED_CONF_FCLK_IS_ON 359 | OMAP_TLL_SHARED_CONF_USB_DIVRATION); 360 reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN; 361 reg &= ~OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN; 362 363 usbtll_write(base, OMAP_TLL_SHARED_CONF, reg); 364 365 /* Enable channels now */ 366 for (i = 0; i < tll->nch; i++) { 367 reg = usbtll_read(base, OMAP_TLL_CHANNEL_CONF(i)); 368 369 if (is_ohci_port(pdata->port_mode[i])) { 370 reg |= ohci_omap3_fslsmode(pdata->port_mode[i]) 371 << OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT; 372 reg |= OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS; 373 } else if (pdata->port_mode[i] == 374 OMAP_EHCI_PORT_MODE_TLL) { 375 /* 376 * Disable AutoIdle, BitStuffing 377 * and use SDR Mode 378 */ 379 reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE 380 | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF 381 | OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE); 382 } else if (pdata->port_mode[i] == 383 OMAP_EHCI_PORT_MODE_HSIC) { 384 /* 385 * HSIC Mode requires UTMI port configurations 386 */ 387 reg |= OMAP_TLL_CHANNEL_CONF_DRVVBUS 388 | OMAP_TLL_CHANNEL_CONF_CHRGVBUS 389 | OMAP_TLL_CHANNEL_CONF_MODE_TRANSPARENT_UTMI 390 | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF; 391 } else { 392 continue; 393 } 394 reg |= OMAP_TLL_CHANNEL_CONF_CHANEN; 395 usbtll_write(base, OMAP_TLL_CHANNEL_CONF(i), reg); 396 397 usbtll_writeb(base, 398 OMAP_TLL_ULPI_SCRATCH_REGISTER(i), 399 0xbe); 400 } 401 } 402 403 spin_unlock(&tll_lock); 404 pm_runtime_put_sync(tll_dev); 405 406 return 0; 407 } 408 EXPORT_SYMBOL_GPL(omap_tll_init); 409 410 int omap_tll_enable(struct usbhs_omap_platform_data *pdata) 411 { 412 int i; 413 struct usbtll_omap *tll; 414 415 if (!tll_dev) 416 return -ENODEV; 417 418 pm_runtime_get_sync(tll_dev); 419 420 spin_lock(&tll_lock); 421 tll = dev_get_drvdata(tll_dev); 422 423 for (i = 0; i < tll->nch; i++) { 424 if (omap_usb_mode_needs_tll(pdata->port_mode[i])) { 425 int r; 426 427 if (IS_ERR(tll->ch_clk[i])) 428 continue; 429 430 r = clk_enable(tll->ch_clk[i]); 431 if (r) { 432 dev_err(tll_dev, 433 "Error enabling ch %d clock: %d\n", i, r); 434 } 435 } 436 } 437 438 spin_unlock(&tll_lock); 439 440 return 0; 441 } 442 EXPORT_SYMBOL_GPL(omap_tll_enable); 443 444 int omap_tll_disable(struct usbhs_omap_platform_data *pdata) 445 { 446 int i; 447 struct usbtll_omap *tll; 448 449 if (!tll_dev) 450 return -ENODEV; 451 452 spin_lock(&tll_lock); 453 tll = dev_get_drvdata(tll_dev); 454 455 for (i = 0; i < tll->nch; i++) { 456 if (omap_usb_mode_needs_tll(pdata->port_mode[i])) { 457 if (!IS_ERR(tll->ch_clk[i])) 458 clk_disable(tll->ch_clk[i]); 459 } 460 } 461 462 spin_unlock(&tll_lock); 463 pm_runtime_put_sync(tll_dev); 464 465 return 0; 466 } 467 EXPORT_SYMBOL_GPL(omap_tll_disable); 468 469 MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>"); 470 MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>"); 471 MODULE_ALIAS("platform:" USBHS_DRIVER_NAME); 472 MODULE_LICENSE("GPL v2"); 473 MODULE_DESCRIPTION("usb tll driver for TI OMAP EHCI and OHCI controllers"); 474 475 static int __init omap_usbtll_drvinit(void) 476 { 477 return platform_driver_register(&usbtll_omap_driver); 478 } 479 480 /* 481 * init before usbhs core driver; 482 * The usbtll driver should be initialized before 483 * the usbhs core driver probe function is called. 484 */ 485 fs_initcall(omap_usbtll_drvinit); 486 487 static void __exit omap_usbtll_drvexit(void) 488 { 489 platform_driver_unregister(&usbtll_omap_driver); 490 } 491 module_exit(omap_usbtll_drvexit); 492