1 /** 2 * omap-usb-host.c - The USBHS core driver for OMAP EHCI & OHCI 3 * 4 * Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com 5 * Author: Keshava Munegowda <keshava_mgowda@ti.com> 6 * Author: Roger Quadros <rogerq@ti.com> 7 * 8 * This program is free software: you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License version 2 of 10 * the License as published by the Free Software Foundation. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program. If not, see <http://www.gnu.org/licenses/>. 19 */ 20 #include <linux/kernel.h> 21 #include <linux/module.h> 22 #include <linux/types.h> 23 #include <linux/slab.h> 24 #include <linux/delay.h> 25 #include <linux/clk.h> 26 #include <linux/dma-mapping.h> 27 #include <linux/gpio.h> 28 #include <linux/platform_device.h> 29 #include <linux/platform_data/usb-omap.h> 30 #include <linux/pm_runtime.h> 31 #include <linux/of.h> 32 #include <linux/of_platform.h> 33 #include <linux/err.h> 34 35 #include "omap-usb.h" 36 37 #define USBHS_DRIVER_NAME "usbhs_omap" 38 #define OMAP_EHCI_DEVICE "ehci-omap" 39 #define OMAP_OHCI_DEVICE "ohci-omap3" 40 41 /* OMAP USBHOST Register addresses */ 42 43 /* UHH Register Set */ 44 #define OMAP_UHH_REVISION (0x00) 45 #define OMAP_UHH_SYSCONFIG (0x10) 46 #define OMAP_UHH_SYSCONFIG_MIDLEMODE (1 << 12) 47 #define OMAP_UHH_SYSCONFIG_CACTIVITY (1 << 8) 48 #define OMAP_UHH_SYSCONFIG_SIDLEMODE (1 << 3) 49 #define OMAP_UHH_SYSCONFIG_ENAWAKEUP (1 << 2) 50 #define OMAP_UHH_SYSCONFIG_SOFTRESET (1 << 1) 51 #define OMAP_UHH_SYSCONFIG_AUTOIDLE (1 << 0) 52 53 #define OMAP_UHH_SYSSTATUS (0x14) 54 #define OMAP_UHH_HOSTCONFIG (0x40) 55 #define OMAP_UHH_HOSTCONFIG_ULPI_BYPASS (1 << 0) 56 #define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS (1 << 0) 57 #define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS (1 << 11) 58 #define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS (1 << 12) 59 #define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN (1 << 2) 60 #define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN (1 << 3) 61 #define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN (1 << 4) 62 #define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN (1 << 5) 63 #define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS (1 << 8) 64 #define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS (1 << 9) 65 #define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS (1 << 10) 66 #define OMAP4_UHH_HOSTCONFIG_APP_START_CLK (1 << 31) 67 68 /* OMAP4-specific defines */ 69 #define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR (3 << 2) 70 #define OMAP4_UHH_SYSCONFIG_NOIDLE (1 << 2) 71 #define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR (3 << 4) 72 #define OMAP4_UHH_SYSCONFIG_NOSTDBY (1 << 4) 73 #define OMAP4_UHH_SYSCONFIG_SOFTRESET (1 << 0) 74 75 #define OMAP4_P1_MODE_CLEAR (3 << 16) 76 #define OMAP4_P1_MODE_TLL (1 << 16) 77 #define OMAP4_P1_MODE_HSIC (3 << 16) 78 #define OMAP4_P2_MODE_CLEAR (3 << 18) 79 #define OMAP4_P2_MODE_TLL (1 << 18) 80 #define OMAP4_P2_MODE_HSIC (3 << 18) 81 82 #define OMAP_UHH_DEBUG_CSR (0x44) 83 84 /* Values of UHH_REVISION - Note: these are not given in the TRM */ 85 #define OMAP_USBHS_REV1 0x00000010 /* OMAP3 */ 86 #define OMAP_USBHS_REV2 0x50700100 /* OMAP4 */ 87 88 #define is_omap_usbhs_rev1(x) (x->usbhs_rev == OMAP_USBHS_REV1) 89 #define is_omap_usbhs_rev2(x) (x->usbhs_rev == OMAP_USBHS_REV2) 90 91 #define is_ehci_phy_mode(x) (x == OMAP_EHCI_PORT_MODE_PHY) 92 #define is_ehci_tll_mode(x) (x == OMAP_EHCI_PORT_MODE_TLL) 93 #define is_ehci_hsic_mode(x) (x == OMAP_EHCI_PORT_MODE_HSIC) 94 95 96 struct usbhs_hcd_omap { 97 int nports; 98 struct clk **utmi_clk; 99 struct clk **hsic60m_clk; 100 struct clk **hsic480m_clk; 101 102 struct clk *xclk60mhsp1_ck; 103 struct clk *xclk60mhsp2_ck; 104 struct clk *utmi_p1_gfclk; 105 struct clk *utmi_p2_gfclk; 106 struct clk *init_60m_fclk; 107 struct clk *ehci_logic_fck; 108 109 void __iomem *uhh_base; 110 111 struct usbhs_omap_platform_data *pdata; 112 113 u32 usbhs_rev; 114 }; 115 /*-------------------------------------------------------------------------*/ 116 117 static const char usbhs_driver_name[] = USBHS_DRIVER_NAME; 118 static u64 usbhs_dmamask = DMA_BIT_MASK(32); 119 120 /*-------------------------------------------------------------------------*/ 121 122 static inline void usbhs_write(void __iomem *base, u32 reg, u32 val) 123 { 124 writel_relaxed(val, base + reg); 125 } 126 127 static inline u32 usbhs_read(void __iomem *base, u32 reg) 128 { 129 return readl_relaxed(base + reg); 130 } 131 132 /*-------------------------------------------------------------------------*/ 133 134 /** 135 * Map 'enum usbhs_omap_port_mode' found in <linux/platform_data/usb-omap.h> 136 * to the device tree binding portN-mode found in 137 * 'Documentation/devicetree/bindings/mfd/omap-usb-host.txt' 138 */ 139 static const char * const port_modes[] = { 140 [OMAP_USBHS_PORT_MODE_UNUSED] = "", 141 [OMAP_EHCI_PORT_MODE_PHY] = "ehci-phy", 142 [OMAP_EHCI_PORT_MODE_TLL] = "ehci-tll", 143 [OMAP_EHCI_PORT_MODE_HSIC] = "ehci-hsic", 144 [OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0] = "ohci-phy-6pin-datse0", 145 [OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM] = "ohci-phy-6pin-dpdm", 146 [OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0] = "ohci-phy-3pin-datse0", 147 [OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM] = "ohci-phy-4pin-dpdm", 148 [OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0] = "ohci-tll-6pin-datse0", 149 [OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM] = "ohci-tll-6pin-dpdm", 150 [OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0] = "ohci-tll-3pin-datse0", 151 [OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM] = "ohci-tll-4pin-dpdm", 152 [OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0] = "ohci-tll-2pin-datse0", 153 [OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM] = "ohci-tll-2pin-dpdm", 154 }; 155 156 /** 157 * omap_usbhs_get_dt_port_mode - Get the 'enum usbhs_omap_port_mode' 158 * from the port mode string. 159 * @mode: The port mode string, usually obtained from device tree. 160 * 161 * The function returns the 'enum usbhs_omap_port_mode' that matches the 162 * provided port mode string as per the port_modes table. 163 * If no match is found it returns -ENODEV 164 */ 165 static int omap_usbhs_get_dt_port_mode(const char *mode) 166 { 167 int i; 168 169 for (i = 0; i < ARRAY_SIZE(port_modes); i++) { 170 if (!strcmp(mode, port_modes[i])) 171 return i; 172 } 173 174 return -ENODEV; 175 } 176 177 static struct platform_device *omap_usbhs_alloc_child(const char *name, 178 struct resource *res, int num_resources, void *pdata, 179 size_t pdata_size, struct device *dev) 180 { 181 struct platform_device *child; 182 int ret; 183 184 child = platform_device_alloc(name, 0); 185 186 if (!child) { 187 dev_err(dev, "platform_device_alloc %s failed\n", name); 188 goto err_end; 189 } 190 191 ret = platform_device_add_resources(child, res, num_resources); 192 if (ret) { 193 dev_err(dev, "platform_device_add_resources failed\n"); 194 goto err_alloc; 195 } 196 197 ret = platform_device_add_data(child, pdata, pdata_size); 198 if (ret) { 199 dev_err(dev, "platform_device_add_data failed\n"); 200 goto err_alloc; 201 } 202 203 child->dev.dma_mask = &usbhs_dmamask; 204 dma_set_coherent_mask(&child->dev, DMA_BIT_MASK(32)); 205 child->dev.parent = dev; 206 207 ret = platform_device_add(child); 208 if (ret) { 209 dev_err(dev, "platform_device_add failed\n"); 210 goto err_alloc; 211 } 212 213 return child; 214 215 err_alloc: 216 platform_device_put(child); 217 218 err_end: 219 return NULL; 220 } 221 222 static int omap_usbhs_alloc_children(struct platform_device *pdev) 223 { 224 struct device *dev = &pdev->dev; 225 struct usbhs_omap_platform_data *pdata = dev_get_platdata(dev); 226 struct platform_device *ehci; 227 struct platform_device *ohci; 228 struct resource *res; 229 struct resource resources[2]; 230 int ret; 231 232 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ehci"); 233 if (!res) { 234 dev_err(dev, "EHCI get resource IORESOURCE_MEM failed\n"); 235 ret = -ENODEV; 236 goto err_end; 237 } 238 resources[0] = *res; 239 240 res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ehci-irq"); 241 if (!res) { 242 dev_err(dev, " EHCI get resource IORESOURCE_IRQ failed\n"); 243 ret = -ENODEV; 244 goto err_end; 245 } 246 resources[1] = *res; 247 248 ehci = omap_usbhs_alloc_child(OMAP_EHCI_DEVICE, resources, 2, pdata, 249 sizeof(*pdata), dev); 250 251 if (!ehci) { 252 dev_err(dev, "omap_usbhs_alloc_child failed\n"); 253 ret = -ENOMEM; 254 goto err_end; 255 } 256 257 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ohci"); 258 if (!res) { 259 dev_err(dev, "OHCI get resource IORESOURCE_MEM failed\n"); 260 ret = -ENODEV; 261 goto err_ehci; 262 } 263 resources[0] = *res; 264 265 res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ohci-irq"); 266 if (!res) { 267 dev_err(dev, "OHCI get resource IORESOURCE_IRQ failed\n"); 268 ret = -ENODEV; 269 goto err_ehci; 270 } 271 resources[1] = *res; 272 273 ohci = omap_usbhs_alloc_child(OMAP_OHCI_DEVICE, resources, 2, pdata, 274 sizeof(*pdata), dev); 275 if (!ohci) { 276 dev_err(dev, "omap_usbhs_alloc_child failed\n"); 277 ret = -ENOMEM; 278 goto err_ehci; 279 } 280 281 return 0; 282 283 err_ehci: 284 platform_device_unregister(ehci); 285 286 err_end: 287 return ret; 288 } 289 290 static bool is_ohci_port(enum usbhs_omap_port_mode pmode) 291 { 292 switch (pmode) { 293 case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: 294 case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: 295 case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: 296 case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: 297 case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: 298 case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: 299 case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: 300 case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: 301 case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: 302 case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: 303 return true; 304 305 default: 306 return false; 307 } 308 } 309 310 static int usbhs_runtime_resume(struct device *dev) 311 { 312 struct usbhs_hcd_omap *omap = dev_get_drvdata(dev); 313 struct usbhs_omap_platform_data *pdata = omap->pdata; 314 int i, r; 315 316 dev_dbg(dev, "usbhs_runtime_resume\n"); 317 318 omap_tll_enable(pdata); 319 320 if (!IS_ERR(omap->ehci_logic_fck)) 321 clk_prepare_enable(omap->ehci_logic_fck); 322 323 for (i = 0; i < omap->nports; i++) { 324 switch (pdata->port_mode[i]) { 325 case OMAP_EHCI_PORT_MODE_HSIC: 326 if (!IS_ERR(omap->hsic60m_clk[i])) { 327 r = clk_prepare_enable(omap->hsic60m_clk[i]); 328 if (r) { 329 dev_err(dev, 330 "Can't enable port %d hsic60m clk:%d\n", 331 i, r); 332 } 333 } 334 335 if (!IS_ERR(omap->hsic480m_clk[i])) { 336 r = clk_prepare_enable(omap->hsic480m_clk[i]); 337 if (r) { 338 dev_err(dev, 339 "Can't enable port %d hsic480m clk:%d\n", 340 i, r); 341 } 342 } 343 /* Fall through as HSIC mode needs utmi_clk */ 344 345 case OMAP_EHCI_PORT_MODE_TLL: 346 if (!IS_ERR(omap->utmi_clk[i])) { 347 r = clk_prepare_enable(omap->utmi_clk[i]); 348 if (r) { 349 dev_err(dev, 350 "Can't enable port %d clk : %d\n", 351 i, r); 352 } 353 } 354 break; 355 default: 356 break; 357 } 358 } 359 360 return 0; 361 } 362 363 static int usbhs_runtime_suspend(struct device *dev) 364 { 365 struct usbhs_hcd_omap *omap = dev_get_drvdata(dev); 366 struct usbhs_omap_platform_data *pdata = omap->pdata; 367 int i; 368 369 dev_dbg(dev, "usbhs_runtime_suspend\n"); 370 371 for (i = 0; i < omap->nports; i++) { 372 switch (pdata->port_mode[i]) { 373 case OMAP_EHCI_PORT_MODE_HSIC: 374 if (!IS_ERR(omap->hsic60m_clk[i])) 375 clk_disable_unprepare(omap->hsic60m_clk[i]); 376 377 if (!IS_ERR(omap->hsic480m_clk[i])) 378 clk_disable_unprepare(omap->hsic480m_clk[i]); 379 /* Fall through as utmi_clks were used in HSIC mode */ 380 381 case OMAP_EHCI_PORT_MODE_TLL: 382 if (!IS_ERR(omap->utmi_clk[i])) 383 clk_disable_unprepare(omap->utmi_clk[i]); 384 break; 385 default: 386 break; 387 } 388 } 389 390 if (!IS_ERR(omap->ehci_logic_fck)) 391 clk_disable_unprepare(omap->ehci_logic_fck); 392 393 omap_tll_disable(pdata); 394 395 return 0; 396 } 397 398 static unsigned omap_usbhs_rev1_hostconfig(struct usbhs_hcd_omap *omap, 399 unsigned reg) 400 { 401 struct usbhs_omap_platform_data *pdata = omap->pdata; 402 int i; 403 404 for (i = 0; i < omap->nports; i++) { 405 switch (pdata->port_mode[i]) { 406 case OMAP_USBHS_PORT_MODE_UNUSED: 407 reg &= ~(OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS << i); 408 break; 409 case OMAP_EHCI_PORT_MODE_PHY: 410 if (pdata->single_ulpi_bypass) 411 break; 412 413 if (i == 0) 414 reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; 415 else 416 reg &= ~(OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS 417 << (i-1)); 418 break; 419 default: 420 if (pdata->single_ulpi_bypass) 421 break; 422 423 if (i == 0) 424 reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; 425 else 426 reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS 427 << (i-1); 428 break; 429 } 430 } 431 432 if (pdata->single_ulpi_bypass) { 433 /* bypass ULPI only if none of the ports use PHY mode */ 434 reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; 435 436 for (i = 0; i < omap->nports; i++) { 437 if (is_ehci_phy_mode(pdata->port_mode[i])) { 438 reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; 439 break; 440 } 441 } 442 } 443 444 return reg; 445 } 446 447 static unsigned omap_usbhs_rev2_hostconfig(struct usbhs_hcd_omap *omap, 448 unsigned reg) 449 { 450 struct usbhs_omap_platform_data *pdata = omap->pdata; 451 int i; 452 453 for (i = 0; i < omap->nports; i++) { 454 /* Clear port mode fields for PHY mode */ 455 reg &= ~(OMAP4_P1_MODE_CLEAR << 2 * i); 456 457 if (is_ehci_tll_mode(pdata->port_mode[i]) || 458 (is_ohci_port(pdata->port_mode[i]))) 459 reg |= OMAP4_P1_MODE_TLL << 2 * i; 460 else if (is_ehci_hsic_mode(pdata->port_mode[i])) 461 reg |= OMAP4_P1_MODE_HSIC << 2 * i; 462 } 463 464 return reg; 465 } 466 467 static void omap_usbhs_init(struct device *dev) 468 { 469 struct usbhs_hcd_omap *omap = dev_get_drvdata(dev); 470 unsigned reg; 471 472 dev_dbg(dev, "starting TI HSUSB Controller\n"); 473 474 pm_runtime_get_sync(dev); 475 476 reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG); 477 /* setup ULPI bypass and burst configurations */ 478 reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN 479 | OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN 480 | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN); 481 reg |= OMAP4_UHH_HOSTCONFIG_APP_START_CLK; 482 reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN; 483 484 switch (omap->usbhs_rev) { 485 case OMAP_USBHS_REV1: 486 reg = omap_usbhs_rev1_hostconfig(omap, reg); 487 break; 488 489 case OMAP_USBHS_REV2: 490 reg = omap_usbhs_rev2_hostconfig(omap, reg); 491 break; 492 493 default: /* newer revisions */ 494 reg = omap_usbhs_rev2_hostconfig(omap, reg); 495 break; 496 } 497 498 usbhs_write(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg); 499 dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg); 500 501 pm_runtime_put_sync(dev); 502 } 503 504 static int usbhs_omap_get_dt_pdata(struct device *dev, 505 struct usbhs_omap_platform_data *pdata) 506 { 507 int ret, i; 508 struct device_node *node = dev->of_node; 509 510 ret = of_property_read_u32(node, "num-ports", &pdata->nports); 511 if (ret) 512 pdata->nports = 0; 513 514 if (pdata->nports > OMAP3_HS_USB_PORTS) { 515 dev_warn(dev, "Too many num_ports <%d> in device tree. Max %d\n", 516 pdata->nports, OMAP3_HS_USB_PORTS); 517 return -ENODEV; 518 } 519 520 /* get port modes */ 521 for (i = 0; i < OMAP3_HS_USB_PORTS; i++) { 522 char prop[11]; 523 const char *mode; 524 525 pdata->port_mode[i] = OMAP_USBHS_PORT_MODE_UNUSED; 526 527 snprintf(prop, sizeof(prop), "port%d-mode", i + 1); 528 ret = of_property_read_string(node, prop, &mode); 529 if (ret < 0) 530 continue; 531 532 ret = omap_usbhs_get_dt_port_mode(mode); 533 if (ret < 0) { 534 dev_warn(dev, "Invalid port%d-mode \"%s\" in device tree\n", 535 i, mode); 536 return -ENODEV; 537 } 538 539 dev_dbg(dev, "port%d-mode: %s -> %d\n", i, mode, ret); 540 pdata->port_mode[i] = ret; 541 } 542 543 /* get flags */ 544 pdata->single_ulpi_bypass = of_property_read_bool(node, 545 "single-ulpi-bypass"); 546 547 return 0; 548 } 549 550 static const struct of_device_id usbhs_child_match_table[] = { 551 { .compatible = "ti,omap-ehci", }, 552 { .compatible = "ti,omap-ohci", }, 553 { } 554 }; 555 556 /** 557 * usbhs_omap_probe - initialize TI-based HCDs 558 * 559 * Allocates basic resources for this USB host controller. 560 */ 561 static int usbhs_omap_probe(struct platform_device *pdev) 562 { 563 struct device *dev = &pdev->dev; 564 struct usbhs_omap_platform_data *pdata = dev_get_platdata(dev); 565 struct usbhs_hcd_omap *omap; 566 struct resource *res; 567 int ret = 0; 568 int i; 569 bool need_logic_fck; 570 571 if (dev->of_node) { 572 /* For DT boot we populate platform data from OF node */ 573 pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); 574 if (!pdata) 575 return -ENOMEM; 576 577 ret = usbhs_omap_get_dt_pdata(dev, pdata); 578 if (ret) 579 return ret; 580 581 dev->platform_data = pdata; 582 } 583 584 if (!pdata) { 585 dev_err(dev, "Missing platform data\n"); 586 return -ENODEV; 587 } 588 589 if (pdata->nports > OMAP3_HS_USB_PORTS) { 590 dev_info(dev, "Too many num_ports <%d> in platform_data. Max %d\n", 591 pdata->nports, OMAP3_HS_USB_PORTS); 592 return -ENODEV; 593 } 594 595 omap = devm_kzalloc(dev, sizeof(*omap), GFP_KERNEL); 596 if (!omap) { 597 dev_err(dev, "Memory allocation failed\n"); 598 return -ENOMEM; 599 } 600 601 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 602 omap->uhh_base = devm_ioremap_resource(dev, res); 603 if (IS_ERR(omap->uhh_base)) 604 return PTR_ERR(omap->uhh_base); 605 606 omap->pdata = pdata; 607 608 /* Initialize the TLL subsystem */ 609 omap_tll_init(pdata); 610 611 pm_runtime_enable(dev); 612 613 platform_set_drvdata(pdev, omap); 614 pm_runtime_get_sync(dev); 615 616 omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION); 617 618 /* we need to call runtime suspend before we update omap->nports 619 * to prevent unbalanced clk_disable() 620 */ 621 pm_runtime_put_sync(dev); 622 623 /* 624 * If platform data contains nports then use that 625 * else make out number of ports from USBHS revision 626 */ 627 if (pdata->nports) { 628 omap->nports = pdata->nports; 629 } else { 630 switch (omap->usbhs_rev) { 631 case OMAP_USBHS_REV1: 632 omap->nports = 3; 633 break; 634 case OMAP_USBHS_REV2: 635 omap->nports = 2; 636 break; 637 default: 638 omap->nports = OMAP3_HS_USB_PORTS; 639 dev_dbg(dev, 640 "USB HOST Rev:0x%x not recognized, assuming %d ports\n", 641 omap->usbhs_rev, omap->nports); 642 break; 643 } 644 pdata->nports = omap->nports; 645 } 646 647 i = sizeof(struct clk *) * omap->nports; 648 omap->utmi_clk = devm_kzalloc(dev, i, GFP_KERNEL); 649 omap->hsic480m_clk = devm_kzalloc(dev, i, GFP_KERNEL); 650 omap->hsic60m_clk = devm_kzalloc(dev, i, GFP_KERNEL); 651 652 if (!omap->utmi_clk || !omap->hsic480m_clk || !omap->hsic60m_clk) { 653 dev_err(dev, "Memory allocation failed\n"); 654 ret = -ENOMEM; 655 goto err_mem; 656 } 657 658 /* Set all clocks as invalid to begin with */ 659 omap->ehci_logic_fck = ERR_PTR(-ENODEV); 660 omap->init_60m_fclk = ERR_PTR(-ENODEV); 661 omap->utmi_p1_gfclk = ERR_PTR(-ENODEV); 662 omap->utmi_p2_gfclk = ERR_PTR(-ENODEV); 663 omap->xclk60mhsp1_ck = ERR_PTR(-ENODEV); 664 omap->xclk60mhsp2_ck = ERR_PTR(-ENODEV); 665 666 for (i = 0; i < omap->nports; i++) { 667 omap->utmi_clk[i] = ERR_PTR(-ENODEV); 668 omap->hsic480m_clk[i] = ERR_PTR(-ENODEV); 669 omap->hsic60m_clk[i] = ERR_PTR(-ENODEV); 670 } 671 672 /* for OMAP3 i.e. USBHS REV1 */ 673 if (omap->usbhs_rev == OMAP_USBHS_REV1) { 674 need_logic_fck = false; 675 for (i = 0; i < omap->nports; i++) { 676 if (is_ehci_phy_mode(pdata->port_mode[i]) || 677 is_ehci_tll_mode(pdata->port_mode[i]) || 678 is_ehci_hsic_mode(pdata->port_mode[i])) 679 680 need_logic_fck |= true; 681 } 682 683 if (need_logic_fck) { 684 omap->ehci_logic_fck = devm_clk_get(dev, 685 "usbhost_120m_fck"); 686 if (IS_ERR(omap->ehci_logic_fck)) { 687 ret = PTR_ERR(omap->ehci_logic_fck); 688 dev_err(dev, "usbhost_120m_fck failed:%d\n", 689 ret); 690 goto err_mem; 691 } 692 } 693 goto initialize; 694 } 695 696 /* for OMAP4+ i.e. USBHS REV2+ */ 697 omap->utmi_p1_gfclk = devm_clk_get(dev, "utmi_p1_gfclk"); 698 if (IS_ERR(omap->utmi_p1_gfclk)) { 699 ret = PTR_ERR(omap->utmi_p1_gfclk); 700 dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret); 701 goto err_mem; 702 } 703 704 omap->utmi_p2_gfclk = devm_clk_get(dev, "utmi_p2_gfclk"); 705 if (IS_ERR(omap->utmi_p2_gfclk)) { 706 ret = PTR_ERR(omap->utmi_p2_gfclk); 707 dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret); 708 goto err_mem; 709 } 710 711 omap->xclk60mhsp1_ck = devm_clk_get(dev, "refclk_60m_ext_p1"); 712 if (IS_ERR(omap->xclk60mhsp1_ck)) { 713 ret = PTR_ERR(omap->xclk60mhsp1_ck); 714 dev_err(dev, "refclk_60m_ext_p1 failed error:%d\n", ret); 715 goto err_mem; 716 } 717 718 omap->xclk60mhsp2_ck = devm_clk_get(dev, "refclk_60m_ext_p2"); 719 if (IS_ERR(omap->xclk60mhsp2_ck)) { 720 ret = PTR_ERR(omap->xclk60mhsp2_ck); 721 dev_err(dev, "refclk_60m_ext_p2 failed error:%d\n", ret); 722 goto err_mem; 723 } 724 725 omap->init_60m_fclk = devm_clk_get(dev, "refclk_60m_int"); 726 if (IS_ERR(omap->init_60m_fclk)) { 727 ret = PTR_ERR(omap->init_60m_fclk); 728 dev_err(dev, "refclk_60m_int failed error:%d\n", ret); 729 goto err_mem; 730 } 731 732 for (i = 0; i < omap->nports; i++) { 733 char clkname[30]; 734 735 /* clock names are indexed from 1*/ 736 snprintf(clkname, sizeof(clkname), 737 "usb_host_hs_utmi_p%d_clk", i + 1); 738 739 /* If a clock is not found we won't bail out as not all 740 * platforms have all clocks and we can function without 741 * them 742 */ 743 omap->utmi_clk[i] = devm_clk_get(dev, clkname); 744 if (IS_ERR(omap->utmi_clk[i])) { 745 ret = PTR_ERR(omap->utmi_clk[i]); 746 dev_err(dev, "Failed to get clock : %s : %d\n", 747 clkname, ret); 748 goto err_mem; 749 } 750 751 snprintf(clkname, sizeof(clkname), 752 "usb_host_hs_hsic480m_p%d_clk", i + 1); 753 omap->hsic480m_clk[i] = devm_clk_get(dev, clkname); 754 if (IS_ERR(omap->hsic480m_clk[i])) { 755 ret = PTR_ERR(omap->hsic480m_clk[i]); 756 dev_err(dev, "Failed to get clock : %s : %d\n", 757 clkname, ret); 758 goto err_mem; 759 } 760 761 snprintf(clkname, sizeof(clkname), 762 "usb_host_hs_hsic60m_p%d_clk", i + 1); 763 omap->hsic60m_clk[i] = devm_clk_get(dev, clkname); 764 if (IS_ERR(omap->hsic60m_clk[i])) { 765 ret = PTR_ERR(omap->hsic60m_clk[i]); 766 dev_err(dev, "Failed to get clock : %s : %d\n", 767 clkname, ret); 768 goto err_mem; 769 } 770 } 771 772 if (is_ehci_phy_mode(pdata->port_mode[0])) { 773 ret = clk_set_parent(omap->utmi_p1_gfclk, 774 omap->xclk60mhsp1_ck); 775 if (ret != 0) { 776 dev_err(dev, "xclk60mhsp1_ck set parent failed: %d\n", 777 ret); 778 goto err_mem; 779 } 780 } else if (is_ehci_tll_mode(pdata->port_mode[0])) { 781 ret = clk_set_parent(omap->utmi_p1_gfclk, 782 omap->init_60m_fclk); 783 if (ret != 0) { 784 dev_err(dev, "P0 init_60m_fclk set parent failed: %d\n", 785 ret); 786 goto err_mem; 787 } 788 } 789 790 if (is_ehci_phy_mode(pdata->port_mode[1])) { 791 ret = clk_set_parent(omap->utmi_p2_gfclk, 792 omap->xclk60mhsp2_ck); 793 if (ret != 0) { 794 dev_err(dev, "xclk60mhsp2_ck set parent failed: %d\n", 795 ret); 796 goto err_mem; 797 } 798 } else if (is_ehci_tll_mode(pdata->port_mode[1])) { 799 ret = clk_set_parent(omap->utmi_p2_gfclk, 800 omap->init_60m_fclk); 801 if (ret != 0) { 802 dev_err(dev, "P1 init_60m_fclk set parent failed: %d\n", 803 ret); 804 goto err_mem; 805 } 806 } 807 808 initialize: 809 omap_usbhs_init(dev); 810 811 if (dev->of_node) { 812 ret = of_platform_populate(dev->of_node, 813 usbhs_child_match_table, NULL, dev); 814 815 if (ret) { 816 dev_err(dev, "Failed to create DT children: %d\n", ret); 817 goto err_mem; 818 } 819 820 } else { 821 ret = omap_usbhs_alloc_children(pdev); 822 if (ret) { 823 dev_err(dev, "omap_usbhs_alloc_children failed: %d\n", 824 ret); 825 goto err_mem; 826 } 827 } 828 829 return 0; 830 831 err_mem: 832 pm_runtime_disable(dev); 833 834 return ret; 835 } 836 837 static int usbhs_omap_remove_child(struct device *dev, void *data) 838 { 839 dev_info(dev, "unregistering\n"); 840 platform_device_unregister(to_platform_device(dev)); 841 return 0; 842 } 843 844 /** 845 * usbhs_omap_remove - shutdown processing for UHH & TLL HCDs 846 * @pdev: USB Host Controller being removed 847 * 848 * Reverses the effect of usbhs_omap_probe(). 849 */ 850 static int usbhs_omap_remove(struct platform_device *pdev) 851 { 852 pm_runtime_disable(&pdev->dev); 853 854 /* remove children */ 855 device_for_each_child(&pdev->dev, NULL, usbhs_omap_remove_child); 856 return 0; 857 } 858 859 static const struct dev_pm_ops usbhsomap_dev_pm_ops = { 860 .runtime_suspend = usbhs_runtime_suspend, 861 .runtime_resume = usbhs_runtime_resume, 862 }; 863 864 static const struct of_device_id usbhs_omap_dt_ids[] = { 865 { .compatible = "ti,usbhs-host" }, 866 { } 867 }; 868 869 MODULE_DEVICE_TABLE(of, usbhs_omap_dt_ids); 870 871 872 static struct platform_driver usbhs_omap_driver = { 873 .driver = { 874 .name = (char *)usbhs_driver_name, 875 .pm = &usbhsomap_dev_pm_ops, 876 .of_match_table = usbhs_omap_dt_ids, 877 }, 878 .remove = usbhs_omap_remove, 879 }; 880 881 MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>"); 882 MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>"); 883 MODULE_ALIAS("platform:" USBHS_DRIVER_NAME); 884 MODULE_LICENSE("GPL v2"); 885 MODULE_DESCRIPTION("usb host common core driver for omap EHCI and OHCI"); 886 887 static int __init omap_usbhs_drvinit(void) 888 { 889 return platform_driver_probe(&usbhs_omap_driver, usbhs_omap_probe); 890 } 891 892 /* 893 * init before ehci and ohci drivers; 894 * The usbhs core driver should be initialized much before 895 * the omap ehci and ohci probe functions are called. 896 * This usbhs core driver should be initialized after 897 * usb tll driver 898 */ 899 fs_initcall_sync(omap_usbhs_drvinit); 900 901 static void __exit omap_usbhs_drvexit(void) 902 { 903 platform_driver_unregister(&usbhs_omap_driver); 904 } 905 module_exit(omap_usbhs_drvexit); 906