xref: /openbmc/linux/drivers/mfd/omap-usb-host.c (revision b60a5b8d)
1 /**
2  * omap-usb-host.c - The USBHS core driver for OMAP EHCI & OHCI
3  *
4  * Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com
5  * Author: Keshava Munegowda <keshava_mgowda@ti.com>
6  * Author: Roger Quadros <rogerq@ti.com>
7  *
8  * This program is free software: you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License version 2  of
10  * the License as published by the Free Software Foundation.
11  *
12  * This program is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15  * GNU General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
19  */
20 #include <linux/kernel.h>
21 #include <linux/module.h>
22 #include <linux/types.h>
23 #include <linux/slab.h>
24 #include <linux/delay.h>
25 #include <linux/clk.h>
26 #include <linux/dma-mapping.h>
27 #include <linux/gpio.h>
28 #include <linux/platform_device.h>
29 #include <linux/platform_data/usb-omap.h>
30 #include <linux/pm_runtime.h>
31 #include <linux/of.h>
32 #include <linux/of_platform.h>
33 #include <linux/err.h>
34 
35 #include "omap-usb.h"
36 
37 #define USBHS_DRIVER_NAME	"usbhs_omap"
38 #define OMAP_EHCI_DEVICE	"ehci-omap"
39 #define OMAP_OHCI_DEVICE	"ohci-omap3"
40 
41 /* OMAP USBHOST Register addresses  */
42 
43 /* UHH Register Set */
44 #define	OMAP_UHH_REVISION				(0x00)
45 #define	OMAP_UHH_SYSCONFIG				(0x10)
46 #define	OMAP_UHH_SYSCONFIG_MIDLEMODE			(1 << 12)
47 #define	OMAP_UHH_SYSCONFIG_CACTIVITY			(1 << 8)
48 #define	OMAP_UHH_SYSCONFIG_SIDLEMODE			(1 << 3)
49 #define	OMAP_UHH_SYSCONFIG_ENAWAKEUP			(1 << 2)
50 #define	OMAP_UHH_SYSCONFIG_SOFTRESET			(1 << 1)
51 #define	OMAP_UHH_SYSCONFIG_AUTOIDLE			(1 << 0)
52 
53 #define	OMAP_UHH_SYSSTATUS				(0x14)
54 #define	OMAP_UHH_HOSTCONFIG				(0x40)
55 #define	OMAP_UHH_HOSTCONFIG_ULPI_BYPASS			(1 << 0)
56 #define	OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS		(1 << 0)
57 #define	OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS		(1 << 11)
58 #define	OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS		(1 << 12)
59 #define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN		(1 << 2)
60 #define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN		(1 << 3)
61 #define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN		(1 << 4)
62 #define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN		(1 << 5)
63 #define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS		(1 << 8)
64 #define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS		(1 << 9)
65 #define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS		(1 << 10)
66 #define OMAP4_UHH_HOSTCONFIG_APP_START_CLK		(1 << 31)
67 
68 /* OMAP4-specific defines */
69 #define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR		(3 << 2)
70 #define OMAP4_UHH_SYSCONFIG_NOIDLE			(1 << 2)
71 #define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR		(3 << 4)
72 #define OMAP4_UHH_SYSCONFIG_NOSTDBY			(1 << 4)
73 #define OMAP4_UHH_SYSCONFIG_SOFTRESET			(1 << 0)
74 
75 #define OMAP4_P1_MODE_CLEAR				(3 << 16)
76 #define OMAP4_P1_MODE_TLL				(1 << 16)
77 #define OMAP4_P1_MODE_HSIC				(3 << 16)
78 #define OMAP4_P2_MODE_CLEAR				(3 << 18)
79 #define OMAP4_P2_MODE_TLL				(1 << 18)
80 #define OMAP4_P2_MODE_HSIC				(3 << 18)
81 
82 #define	OMAP_UHH_DEBUG_CSR				(0x44)
83 
84 /* Values of UHH_REVISION - Note: these are not given in the TRM */
85 #define OMAP_USBHS_REV1		0x00000010	/* OMAP3 */
86 #define OMAP_USBHS_REV2		0x50700100	/* OMAP4 */
87 
88 #define is_omap_usbhs_rev1(x)	(x->usbhs_rev == OMAP_USBHS_REV1)
89 #define is_omap_usbhs_rev2(x)	(x->usbhs_rev == OMAP_USBHS_REV2)
90 
91 #define is_ehci_phy_mode(x)	(x == OMAP_EHCI_PORT_MODE_PHY)
92 #define is_ehci_tll_mode(x)	(x == OMAP_EHCI_PORT_MODE_TLL)
93 #define is_ehci_hsic_mode(x)	(x == OMAP_EHCI_PORT_MODE_HSIC)
94 
95 
96 struct usbhs_hcd_omap {
97 	int				nports;
98 	struct clk			**utmi_clk;
99 	struct clk			**hsic60m_clk;
100 	struct clk			**hsic480m_clk;
101 
102 	struct clk			*xclk60mhsp1_ck;
103 	struct clk			*xclk60mhsp2_ck;
104 	struct clk			*utmi_p1_gfclk;
105 	struct clk			*utmi_p2_gfclk;
106 	struct clk			*init_60m_fclk;
107 	struct clk			*ehci_logic_fck;
108 
109 	void __iomem			*uhh_base;
110 
111 	struct usbhs_omap_platform_data	*pdata;
112 
113 	u32				usbhs_rev;
114 };
115 /*-------------------------------------------------------------------------*/
116 
117 static const char usbhs_driver_name[] = USBHS_DRIVER_NAME;
118 static u64 usbhs_dmamask = DMA_BIT_MASK(32);
119 
120 /*-------------------------------------------------------------------------*/
121 
122 static inline void usbhs_write(void __iomem *base, u32 reg, u32 val)
123 {
124 	writel_relaxed(val, base + reg);
125 }
126 
127 static inline u32 usbhs_read(void __iomem *base, u32 reg)
128 {
129 	return readl_relaxed(base + reg);
130 }
131 
132 /*-------------------------------------------------------------------------*/
133 
134 /**
135  * Map 'enum usbhs_omap_port_mode' found in <linux/platform_data/usb-omap.h>
136  * to the device tree binding portN-mode found in
137  * 'Documentation/devicetree/bindings/mfd/omap-usb-host.txt'
138  */
139 static const char * const port_modes[] = {
140 	[OMAP_USBHS_PORT_MODE_UNUSED]	= "",
141 	[OMAP_EHCI_PORT_MODE_PHY]	= "ehci-phy",
142 	[OMAP_EHCI_PORT_MODE_TLL]	= "ehci-tll",
143 	[OMAP_EHCI_PORT_MODE_HSIC]	= "ehci-hsic",
144 	[OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0]	= "ohci-phy-6pin-datse0",
145 	[OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM]	= "ohci-phy-6pin-dpdm",
146 	[OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0]	= "ohci-phy-3pin-datse0",
147 	[OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM]	= "ohci-phy-4pin-dpdm",
148 	[OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0]	= "ohci-tll-6pin-datse0",
149 	[OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM]	= "ohci-tll-6pin-dpdm",
150 	[OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0]	= "ohci-tll-3pin-datse0",
151 	[OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM]	= "ohci-tll-4pin-dpdm",
152 	[OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0]	= "ohci-tll-2pin-datse0",
153 	[OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM]	= "ohci-tll-2pin-dpdm",
154 };
155 
156 static struct platform_device *omap_usbhs_alloc_child(const char *name,
157 			struct resource	*res, int num_resources, void *pdata,
158 			size_t pdata_size, struct device *dev)
159 {
160 	struct platform_device	*child;
161 	int			ret;
162 
163 	child = platform_device_alloc(name, 0);
164 
165 	if (!child) {
166 		dev_err(dev, "platform_device_alloc %s failed\n", name);
167 		goto err_end;
168 	}
169 
170 	ret = platform_device_add_resources(child, res, num_resources);
171 	if (ret) {
172 		dev_err(dev, "platform_device_add_resources failed\n");
173 		goto err_alloc;
174 	}
175 
176 	ret = platform_device_add_data(child, pdata, pdata_size);
177 	if (ret) {
178 		dev_err(dev, "platform_device_add_data failed\n");
179 		goto err_alloc;
180 	}
181 
182 	child->dev.dma_mask		= &usbhs_dmamask;
183 	dma_set_coherent_mask(&child->dev, DMA_BIT_MASK(32));
184 	child->dev.parent		= dev;
185 
186 	ret = platform_device_add(child);
187 	if (ret) {
188 		dev_err(dev, "platform_device_add failed\n");
189 		goto err_alloc;
190 	}
191 
192 	return child;
193 
194 err_alloc:
195 	platform_device_put(child);
196 
197 err_end:
198 	return NULL;
199 }
200 
201 static int omap_usbhs_alloc_children(struct platform_device *pdev)
202 {
203 	struct device				*dev = &pdev->dev;
204 	struct usbhs_omap_platform_data		*pdata = dev_get_platdata(dev);
205 	struct platform_device			*ehci;
206 	struct platform_device			*ohci;
207 	struct resource				*res;
208 	struct resource				resources[2];
209 	int					ret;
210 
211 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ehci");
212 	if (!res) {
213 		dev_err(dev, "EHCI get resource IORESOURCE_MEM failed\n");
214 		ret = -ENODEV;
215 		goto err_end;
216 	}
217 	resources[0] = *res;
218 
219 	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ehci-irq");
220 	if (!res) {
221 		dev_err(dev, " EHCI get resource IORESOURCE_IRQ failed\n");
222 		ret = -ENODEV;
223 		goto err_end;
224 	}
225 	resources[1] = *res;
226 
227 	ehci = omap_usbhs_alloc_child(OMAP_EHCI_DEVICE, resources, 2, pdata,
228 		sizeof(*pdata), dev);
229 
230 	if (!ehci) {
231 		dev_err(dev, "omap_usbhs_alloc_child failed\n");
232 		ret = -ENOMEM;
233 		goto err_end;
234 	}
235 
236 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ohci");
237 	if (!res) {
238 		dev_err(dev, "OHCI get resource IORESOURCE_MEM failed\n");
239 		ret = -ENODEV;
240 		goto err_ehci;
241 	}
242 	resources[0] = *res;
243 
244 	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ohci-irq");
245 	if (!res) {
246 		dev_err(dev, "OHCI get resource IORESOURCE_IRQ failed\n");
247 		ret = -ENODEV;
248 		goto err_ehci;
249 	}
250 	resources[1] = *res;
251 
252 	ohci = omap_usbhs_alloc_child(OMAP_OHCI_DEVICE, resources, 2, pdata,
253 		sizeof(*pdata), dev);
254 	if (!ohci) {
255 		dev_err(dev, "omap_usbhs_alloc_child failed\n");
256 		ret = -ENOMEM;
257 		goto err_ehci;
258 	}
259 
260 	return 0;
261 
262 err_ehci:
263 	platform_device_unregister(ehci);
264 
265 err_end:
266 	return ret;
267 }
268 
269 static bool is_ohci_port(enum usbhs_omap_port_mode pmode)
270 {
271 	switch (pmode) {
272 	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
273 	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
274 	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
275 	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
276 	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
277 	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
278 	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
279 	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
280 	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
281 	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
282 		return true;
283 
284 	default:
285 		return false;
286 	}
287 }
288 
289 static int usbhs_runtime_resume(struct device *dev)
290 {
291 	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
292 	struct usbhs_omap_platform_data	*pdata = omap->pdata;
293 	int i, r;
294 
295 	dev_dbg(dev, "usbhs_runtime_resume\n");
296 
297 	omap_tll_enable(pdata);
298 
299 	if (!IS_ERR(omap->ehci_logic_fck))
300 		clk_prepare_enable(omap->ehci_logic_fck);
301 
302 	for (i = 0; i < omap->nports; i++) {
303 		switch (pdata->port_mode[i]) {
304 		case OMAP_EHCI_PORT_MODE_HSIC:
305 			if (!IS_ERR(omap->hsic60m_clk[i])) {
306 				r = clk_prepare_enable(omap->hsic60m_clk[i]);
307 				if (r) {
308 					dev_err(dev,
309 					 "Can't enable port %d hsic60m clk:%d\n",
310 					 i, r);
311 				}
312 			}
313 
314 			if (!IS_ERR(omap->hsic480m_clk[i])) {
315 				r = clk_prepare_enable(omap->hsic480m_clk[i]);
316 				if (r) {
317 					dev_err(dev,
318 					 "Can't enable port %d hsic480m clk:%d\n",
319 					 i, r);
320 				}
321 			}
322 		/* Fall through as HSIC mode needs utmi_clk */
323 
324 		case OMAP_EHCI_PORT_MODE_TLL:
325 			if (!IS_ERR(omap->utmi_clk[i])) {
326 				r = clk_prepare_enable(omap->utmi_clk[i]);
327 				if (r) {
328 					dev_err(dev,
329 					 "Can't enable port %d clk : %d\n",
330 					 i, r);
331 				}
332 			}
333 			break;
334 		default:
335 			break;
336 		}
337 	}
338 
339 	return 0;
340 }
341 
342 static int usbhs_runtime_suspend(struct device *dev)
343 {
344 	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
345 	struct usbhs_omap_platform_data	*pdata = omap->pdata;
346 	int i;
347 
348 	dev_dbg(dev, "usbhs_runtime_suspend\n");
349 
350 	for (i = 0; i < omap->nports; i++) {
351 		switch (pdata->port_mode[i]) {
352 		case OMAP_EHCI_PORT_MODE_HSIC:
353 			if (!IS_ERR(omap->hsic60m_clk[i]))
354 				clk_disable_unprepare(omap->hsic60m_clk[i]);
355 
356 			if (!IS_ERR(omap->hsic480m_clk[i]))
357 				clk_disable_unprepare(omap->hsic480m_clk[i]);
358 		/* Fall through as utmi_clks were used in HSIC mode */
359 
360 		case OMAP_EHCI_PORT_MODE_TLL:
361 			if (!IS_ERR(omap->utmi_clk[i]))
362 				clk_disable_unprepare(omap->utmi_clk[i]);
363 			break;
364 		default:
365 			break;
366 		}
367 	}
368 
369 	if (!IS_ERR(omap->ehci_logic_fck))
370 		clk_disable_unprepare(omap->ehci_logic_fck);
371 
372 	omap_tll_disable(pdata);
373 
374 	return 0;
375 }
376 
377 static unsigned omap_usbhs_rev1_hostconfig(struct usbhs_hcd_omap *omap,
378 						unsigned reg)
379 {
380 	struct usbhs_omap_platform_data	*pdata = omap->pdata;
381 	int i;
382 
383 	for (i = 0; i < omap->nports; i++) {
384 		switch (pdata->port_mode[i]) {
385 		case OMAP_USBHS_PORT_MODE_UNUSED:
386 			reg &= ~(OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS << i);
387 			break;
388 		case OMAP_EHCI_PORT_MODE_PHY:
389 			if (pdata->single_ulpi_bypass)
390 				break;
391 
392 			if (i == 0)
393 				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
394 			else
395 				reg &= ~(OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS
396 								<< (i-1));
397 			break;
398 		default:
399 			if (pdata->single_ulpi_bypass)
400 				break;
401 
402 			if (i == 0)
403 				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
404 			else
405 				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS
406 								<< (i-1);
407 			break;
408 		}
409 	}
410 
411 	if (pdata->single_ulpi_bypass) {
412 		/* bypass ULPI only if none of the ports use PHY mode */
413 		reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
414 
415 		for (i = 0; i < omap->nports; i++) {
416 			if (is_ehci_phy_mode(pdata->port_mode[i])) {
417 				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
418 				break;
419 			}
420 		}
421 	}
422 
423 	return reg;
424 }
425 
426 static unsigned omap_usbhs_rev2_hostconfig(struct usbhs_hcd_omap *omap,
427 						unsigned reg)
428 {
429 	struct usbhs_omap_platform_data	*pdata = omap->pdata;
430 	int i;
431 
432 	for (i = 0; i < omap->nports; i++) {
433 		/* Clear port mode fields for PHY mode */
434 		reg &= ~(OMAP4_P1_MODE_CLEAR << 2 * i);
435 
436 		if (is_ehci_tll_mode(pdata->port_mode[i]) ||
437 				(is_ohci_port(pdata->port_mode[i])))
438 			reg |= OMAP4_P1_MODE_TLL << 2 * i;
439 		else if (is_ehci_hsic_mode(pdata->port_mode[i]))
440 			reg |= OMAP4_P1_MODE_HSIC << 2 * i;
441 	}
442 
443 	return reg;
444 }
445 
446 static void omap_usbhs_init(struct device *dev)
447 {
448 	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
449 	unsigned			reg;
450 
451 	dev_dbg(dev, "starting TI HSUSB Controller\n");
452 
453 	pm_runtime_get_sync(dev);
454 
455 	reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
456 	/* setup ULPI bypass and burst configurations */
457 	reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
458 			| OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN
459 			| OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN);
460 	reg |= OMAP4_UHH_HOSTCONFIG_APP_START_CLK;
461 	reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;
462 
463 	switch (omap->usbhs_rev) {
464 	case OMAP_USBHS_REV1:
465 		reg = omap_usbhs_rev1_hostconfig(omap, reg);
466 		break;
467 
468 	case OMAP_USBHS_REV2:
469 		reg = omap_usbhs_rev2_hostconfig(omap, reg);
470 		break;
471 
472 	default:	/* newer revisions */
473 		reg = omap_usbhs_rev2_hostconfig(omap, reg);
474 		break;
475 	}
476 
477 	usbhs_write(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg);
478 	dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
479 
480 	pm_runtime_put_sync(dev);
481 }
482 
483 static int usbhs_omap_get_dt_pdata(struct device *dev,
484 					struct usbhs_omap_platform_data *pdata)
485 {
486 	int ret, i;
487 	struct device_node *node = dev->of_node;
488 
489 	ret = of_property_read_u32(node, "num-ports", &pdata->nports);
490 	if (ret)
491 		pdata->nports = 0;
492 
493 	if (pdata->nports > OMAP3_HS_USB_PORTS) {
494 		dev_warn(dev, "Too many num_ports <%d> in device tree. Max %d\n",
495 				pdata->nports, OMAP3_HS_USB_PORTS);
496 		return -ENODEV;
497 	}
498 
499 	/* get port modes */
500 	for (i = 0; i < OMAP3_HS_USB_PORTS; i++) {
501 		char prop[11];
502 		const char *mode;
503 
504 		pdata->port_mode[i] = OMAP_USBHS_PORT_MODE_UNUSED;
505 
506 		snprintf(prop, sizeof(prop), "port%d-mode", i + 1);
507 		ret = of_property_read_string(node, prop, &mode);
508 		if (ret < 0)
509 			continue;
510 
511 		/* get 'enum usbhs_omap_port_mode' from port mode string */
512 		ret = match_string(port_modes, ARRAY_SIZE(port_modes), mode);
513 		if (ret < 0) {
514 			dev_warn(dev, "Invalid port%d-mode \"%s\" in device tree\n",
515 					i, mode);
516 			return -ENODEV;
517 		}
518 
519 		dev_dbg(dev, "port%d-mode: %s -> %d\n", i, mode, ret);
520 		pdata->port_mode[i] = ret;
521 	}
522 
523 	/* get flags */
524 	pdata->single_ulpi_bypass = of_property_read_bool(node,
525 						"single-ulpi-bypass");
526 
527 	return 0;
528 }
529 
530 static const struct of_device_id usbhs_child_match_table[] = {
531 	{ .compatible = "ti,ehci-omap", },
532 	{ .compatible = "ti,ohci-omap3", },
533 	{ }
534 };
535 
536 /**
537  * usbhs_omap_probe - initialize TI-based HCDs
538  *
539  * Allocates basic resources for this USB host controller.
540  */
541 static int usbhs_omap_probe(struct platform_device *pdev)
542 {
543 	struct device			*dev =  &pdev->dev;
544 	struct usbhs_omap_platform_data	*pdata = dev_get_platdata(dev);
545 	struct usbhs_hcd_omap		*omap;
546 	struct resource			*res;
547 	int				ret = 0;
548 	int				i;
549 	bool				need_logic_fck;
550 
551 	if (dev->of_node) {
552 		/* For DT boot we populate platform data from OF node */
553 		pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
554 		if (!pdata)
555 			return -ENOMEM;
556 
557 		ret = usbhs_omap_get_dt_pdata(dev, pdata);
558 		if (ret)
559 			return ret;
560 
561 		dev->platform_data = pdata;
562 	}
563 
564 	if (!pdata) {
565 		dev_err(dev, "Missing platform data\n");
566 		return -ENODEV;
567 	}
568 
569 	if (pdata->nports > OMAP3_HS_USB_PORTS) {
570 		dev_info(dev, "Too many num_ports <%d> in platform_data. Max %d\n",
571 				pdata->nports, OMAP3_HS_USB_PORTS);
572 		return -ENODEV;
573 	}
574 
575 	omap = devm_kzalloc(dev, sizeof(*omap), GFP_KERNEL);
576 	if (!omap) {
577 		dev_err(dev, "Memory allocation failed\n");
578 		return -ENOMEM;
579 	}
580 
581 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
582 	omap->uhh_base = devm_ioremap_resource(dev, res);
583 	if (IS_ERR(omap->uhh_base))
584 		return PTR_ERR(omap->uhh_base);
585 
586 	omap->pdata = pdata;
587 
588 	/* Initialize the TLL subsystem */
589 	omap_tll_init(pdata);
590 
591 	pm_runtime_enable(dev);
592 
593 	platform_set_drvdata(pdev, omap);
594 	pm_runtime_get_sync(dev);
595 
596 	omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
597 
598 	/* we need to call runtime suspend before we update omap->nports
599 	 * to prevent unbalanced clk_disable()
600 	 */
601 	pm_runtime_put_sync(dev);
602 
603 	/*
604 	 * If platform data contains nports then use that
605 	 * else make out number of ports from USBHS revision
606 	 */
607 	if (pdata->nports) {
608 		omap->nports = pdata->nports;
609 	} else {
610 		switch (omap->usbhs_rev) {
611 		case OMAP_USBHS_REV1:
612 			omap->nports = 3;
613 			break;
614 		case OMAP_USBHS_REV2:
615 			omap->nports = 2;
616 			break;
617 		default:
618 			omap->nports = OMAP3_HS_USB_PORTS;
619 			dev_dbg(dev,
620 			 "USB HOST Rev:0x%x not recognized, assuming %d ports\n",
621 			 omap->usbhs_rev, omap->nports);
622 			break;
623 		}
624 		pdata->nports = omap->nports;
625 	}
626 
627 	i = sizeof(struct clk *) * omap->nports;
628 	omap->utmi_clk = devm_kzalloc(dev, i, GFP_KERNEL);
629 	omap->hsic480m_clk = devm_kzalloc(dev, i, GFP_KERNEL);
630 	omap->hsic60m_clk = devm_kzalloc(dev, i, GFP_KERNEL);
631 
632 	if (!omap->utmi_clk || !omap->hsic480m_clk || !omap->hsic60m_clk) {
633 		dev_err(dev, "Memory allocation failed\n");
634 		ret = -ENOMEM;
635 		goto err_mem;
636 	}
637 
638 	/* Set all clocks as invalid to begin with */
639 	omap->ehci_logic_fck = ERR_PTR(-ENODEV);
640 	omap->init_60m_fclk = ERR_PTR(-ENODEV);
641 	omap->utmi_p1_gfclk = ERR_PTR(-ENODEV);
642 	omap->utmi_p2_gfclk = ERR_PTR(-ENODEV);
643 	omap->xclk60mhsp1_ck = ERR_PTR(-ENODEV);
644 	omap->xclk60mhsp2_ck = ERR_PTR(-ENODEV);
645 
646 	for (i = 0; i < omap->nports; i++) {
647 		omap->utmi_clk[i] = ERR_PTR(-ENODEV);
648 		omap->hsic480m_clk[i] = ERR_PTR(-ENODEV);
649 		omap->hsic60m_clk[i] = ERR_PTR(-ENODEV);
650 	}
651 
652 	/* for OMAP3 i.e. USBHS REV1 */
653 	if (omap->usbhs_rev == OMAP_USBHS_REV1) {
654 		need_logic_fck = false;
655 		for (i = 0; i < omap->nports; i++) {
656 			if (is_ehci_phy_mode(pdata->port_mode[i]) ||
657 			    is_ehci_tll_mode(pdata->port_mode[i]) ||
658 			    is_ehci_hsic_mode(pdata->port_mode[i]))
659 
660 				need_logic_fck |= true;
661 		}
662 
663 		if (need_logic_fck) {
664 			omap->ehci_logic_fck = devm_clk_get(dev,
665 							    "usbhost_120m_fck");
666 			if (IS_ERR(omap->ehci_logic_fck)) {
667 				ret = PTR_ERR(omap->ehci_logic_fck);
668 				dev_err(dev, "usbhost_120m_fck failed:%d\n",
669 					ret);
670 				goto err_mem;
671 			}
672 		}
673 		goto initialize;
674 	}
675 
676 	/* for OMAP4+ i.e. USBHS REV2+ */
677 	omap->utmi_p1_gfclk = devm_clk_get(dev, "utmi_p1_gfclk");
678 	if (IS_ERR(omap->utmi_p1_gfclk)) {
679 		ret = PTR_ERR(omap->utmi_p1_gfclk);
680 		dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret);
681 		goto err_mem;
682 	}
683 
684 	omap->utmi_p2_gfclk = devm_clk_get(dev, "utmi_p2_gfclk");
685 	if (IS_ERR(omap->utmi_p2_gfclk)) {
686 		ret = PTR_ERR(omap->utmi_p2_gfclk);
687 		dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
688 		goto err_mem;
689 	}
690 
691 	omap->xclk60mhsp1_ck = devm_clk_get(dev, "refclk_60m_ext_p1");
692 	if (IS_ERR(omap->xclk60mhsp1_ck)) {
693 		ret = PTR_ERR(omap->xclk60mhsp1_ck);
694 		dev_err(dev, "refclk_60m_ext_p1 failed error:%d\n", ret);
695 		goto err_mem;
696 	}
697 
698 	omap->xclk60mhsp2_ck = devm_clk_get(dev, "refclk_60m_ext_p2");
699 	if (IS_ERR(omap->xclk60mhsp2_ck)) {
700 		ret = PTR_ERR(omap->xclk60mhsp2_ck);
701 		dev_err(dev, "refclk_60m_ext_p2 failed error:%d\n", ret);
702 		goto err_mem;
703 	}
704 
705 	omap->init_60m_fclk = devm_clk_get(dev, "refclk_60m_int");
706 	if (IS_ERR(omap->init_60m_fclk)) {
707 		ret = PTR_ERR(omap->init_60m_fclk);
708 		dev_err(dev, "refclk_60m_int failed error:%d\n", ret);
709 		goto err_mem;
710 	}
711 
712 	for (i = 0; i < omap->nports; i++) {
713 		char clkname[30];
714 
715 		/* clock names are indexed from 1*/
716 		snprintf(clkname, sizeof(clkname),
717 				"usb_host_hs_utmi_p%d_clk", i + 1);
718 
719 		/* If a clock is not found we won't bail out as not all
720 		 * platforms have all clocks and we can function without
721 		 * them
722 		 */
723 		omap->utmi_clk[i] = devm_clk_get(dev, clkname);
724 		if (IS_ERR(omap->utmi_clk[i])) {
725 			ret = PTR_ERR(omap->utmi_clk[i]);
726 			dev_err(dev, "Failed to get clock : %s : %d\n",
727 				clkname, ret);
728 			goto err_mem;
729 		}
730 
731 		snprintf(clkname, sizeof(clkname),
732 				"usb_host_hs_hsic480m_p%d_clk", i + 1);
733 		omap->hsic480m_clk[i] = devm_clk_get(dev, clkname);
734 		if (IS_ERR(omap->hsic480m_clk[i])) {
735 			ret = PTR_ERR(omap->hsic480m_clk[i]);
736 			dev_err(dev, "Failed to get clock : %s : %d\n",
737 				clkname, ret);
738 			goto err_mem;
739 		}
740 
741 		snprintf(clkname, sizeof(clkname),
742 				"usb_host_hs_hsic60m_p%d_clk", i + 1);
743 		omap->hsic60m_clk[i] = devm_clk_get(dev, clkname);
744 		if (IS_ERR(omap->hsic60m_clk[i])) {
745 			ret = PTR_ERR(omap->hsic60m_clk[i]);
746 			dev_err(dev, "Failed to get clock : %s : %d\n",
747 				clkname, ret);
748 			goto err_mem;
749 		}
750 	}
751 
752 	if (is_ehci_phy_mode(pdata->port_mode[0])) {
753 		ret = clk_set_parent(omap->utmi_p1_gfclk,
754 					omap->xclk60mhsp1_ck);
755 		if (ret != 0) {
756 			dev_err(dev, "xclk60mhsp1_ck set parent failed: %d\n",
757 				ret);
758 			goto err_mem;
759 		}
760 	} else if (is_ehci_tll_mode(pdata->port_mode[0])) {
761 		ret = clk_set_parent(omap->utmi_p1_gfclk,
762 					omap->init_60m_fclk);
763 		if (ret != 0) {
764 			dev_err(dev, "P0 init_60m_fclk set parent failed: %d\n",
765 				ret);
766 			goto err_mem;
767 		}
768 	}
769 
770 	if (is_ehci_phy_mode(pdata->port_mode[1])) {
771 		ret = clk_set_parent(omap->utmi_p2_gfclk,
772 					omap->xclk60mhsp2_ck);
773 		if (ret != 0) {
774 			dev_err(dev, "xclk60mhsp2_ck set parent failed: %d\n",
775 				ret);
776 			goto err_mem;
777 		}
778 	} else if (is_ehci_tll_mode(pdata->port_mode[1])) {
779 		ret = clk_set_parent(omap->utmi_p2_gfclk,
780 						omap->init_60m_fclk);
781 		if (ret != 0) {
782 			dev_err(dev, "P1 init_60m_fclk set parent failed: %d\n",
783 				ret);
784 			goto err_mem;
785 		}
786 	}
787 
788 initialize:
789 	omap_usbhs_init(dev);
790 
791 	if (dev->of_node) {
792 		ret = of_platform_populate(dev->of_node,
793 				usbhs_child_match_table, NULL, dev);
794 
795 		if (ret) {
796 			dev_err(dev, "Failed to create DT children: %d\n", ret);
797 			goto err_mem;
798 		}
799 
800 	} else {
801 		ret = omap_usbhs_alloc_children(pdev);
802 		if (ret) {
803 			dev_err(dev, "omap_usbhs_alloc_children failed: %d\n",
804 						ret);
805 			goto err_mem;
806 		}
807 	}
808 
809 	return 0;
810 
811 err_mem:
812 	pm_runtime_disable(dev);
813 
814 	return ret;
815 }
816 
817 static int usbhs_omap_remove_child(struct device *dev, void *data)
818 {
819 	dev_info(dev, "unregistering\n");
820 	platform_device_unregister(to_platform_device(dev));
821 	return 0;
822 }
823 
824 /**
825  * usbhs_omap_remove - shutdown processing for UHH & TLL HCDs
826  * @pdev: USB Host Controller being removed
827  *
828  * Reverses the effect of usbhs_omap_probe().
829  */
830 static int usbhs_omap_remove(struct platform_device *pdev)
831 {
832 	pm_runtime_disable(&pdev->dev);
833 
834 	/* remove children */
835 	device_for_each_child(&pdev->dev, NULL, usbhs_omap_remove_child);
836 	return 0;
837 }
838 
839 static const struct dev_pm_ops usbhsomap_dev_pm_ops = {
840 	.runtime_suspend	= usbhs_runtime_suspend,
841 	.runtime_resume		= usbhs_runtime_resume,
842 };
843 
844 static const struct of_device_id usbhs_omap_dt_ids[] = {
845 	{ .compatible = "ti,usbhs-host" },
846 	{ }
847 };
848 
849 MODULE_DEVICE_TABLE(of, usbhs_omap_dt_ids);
850 
851 
852 static struct platform_driver usbhs_omap_driver = {
853 	.driver = {
854 		.name		= (char *)usbhs_driver_name,
855 		.pm		= &usbhsomap_dev_pm_ops,
856 		.of_match_table = usbhs_omap_dt_ids,
857 	},
858 	.probe		= usbhs_omap_probe,
859 	.remove		= usbhs_omap_remove,
860 };
861 
862 MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>");
863 MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");
864 MODULE_ALIAS("platform:" USBHS_DRIVER_NAME);
865 MODULE_LICENSE("GPL v2");
866 MODULE_DESCRIPTION("usb host common core driver for omap EHCI and OHCI");
867 
868 static int omap_usbhs_drvinit(void)
869 {
870 	return platform_driver_register(&usbhs_omap_driver);
871 }
872 
873 /*
874  * init before ehci and ohci drivers;
875  * The usbhs core driver should be initialized much before
876  * the omap ehci and ohci probe functions are called.
877  * This usbhs core driver should be initialized after
878  * usb tll driver
879  */
880 fs_initcall_sync(omap_usbhs_drvinit);
881 
882 static void omap_usbhs_drvexit(void)
883 {
884 	platform_driver_unregister(&usbhs_omap_driver);
885 }
886 module_exit(omap_usbhs_drvexit);
887