xref: /openbmc/linux/drivers/mfd/omap-usb-host.c (revision 77d84ff8)
1 /**
2  * omap-usb-host.c - The USBHS core driver for OMAP EHCI & OHCI
3  *
4  * Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com
5  * Author: Keshava Munegowda <keshava_mgowda@ti.com>
6  * Author: Roger Quadros <rogerq@ti.com>
7  *
8  * This program is free software: you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License version 2  of
10  * the License as published by the Free Software Foundation.
11  *
12  * This program is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15  * GNU General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
19  */
20 #include <linux/kernel.h>
21 #include <linux/module.h>
22 #include <linux/types.h>
23 #include <linux/slab.h>
24 #include <linux/delay.h>
25 #include <linux/clk.h>
26 #include <linux/dma-mapping.h>
27 #include <linux/gpio.h>
28 #include <linux/platform_device.h>
29 #include <linux/platform_data/usb-omap.h>
30 #include <linux/pm_runtime.h>
31 #include <linux/of.h>
32 #include <linux/of_platform.h>
33 #include <linux/err.h>
34 
35 #include "omap-usb.h"
36 
37 #define USBHS_DRIVER_NAME	"usbhs_omap"
38 #define OMAP_EHCI_DEVICE	"ehci-omap"
39 #define OMAP_OHCI_DEVICE	"ohci-omap3"
40 
41 /* OMAP USBHOST Register addresses  */
42 
43 /* UHH Register Set */
44 #define	OMAP_UHH_REVISION				(0x00)
45 #define	OMAP_UHH_SYSCONFIG				(0x10)
46 #define	OMAP_UHH_SYSCONFIG_MIDLEMODE			(1 << 12)
47 #define	OMAP_UHH_SYSCONFIG_CACTIVITY			(1 << 8)
48 #define	OMAP_UHH_SYSCONFIG_SIDLEMODE			(1 << 3)
49 #define	OMAP_UHH_SYSCONFIG_ENAWAKEUP			(1 << 2)
50 #define	OMAP_UHH_SYSCONFIG_SOFTRESET			(1 << 1)
51 #define	OMAP_UHH_SYSCONFIG_AUTOIDLE			(1 << 0)
52 
53 #define	OMAP_UHH_SYSSTATUS				(0x14)
54 #define	OMAP_UHH_HOSTCONFIG				(0x40)
55 #define	OMAP_UHH_HOSTCONFIG_ULPI_BYPASS			(1 << 0)
56 #define	OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS		(1 << 0)
57 #define	OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS		(1 << 11)
58 #define	OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS		(1 << 12)
59 #define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN		(1 << 2)
60 #define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN		(1 << 3)
61 #define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN		(1 << 4)
62 #define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN		(1 << 5)
63 #define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS		(1 << 8)
64 #define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS		(1 << 9)
65 #define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS		(1 << 10)
66 #define OMAP4_UHH_HOSTCONFIG_APP_START_CLK		(1 << 31)
67 
68 /* OMAP4-specific defines */
69 #define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR		(3 << 2)
70 #define OMAP4_UHH_SYSCONFIG_NOIDLE			(1 << 2)
71 #define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR		(3 << 4)
72 #define OMAP4_UHH_SYSCONFIG_NOSTDBY			(1 << 4)
73 #define OMAP4_UHH_SYSCONFIG_SOFTRESET			(1 << 0)
74 
75 #define OMAP4_P1_MODE_CLEAR				(3 << 16)
76 #define OMAP4_P1_MODE_TLL				(1 << 16)
77 #define OMAP4_P1_MODE_HSIC				(3 << 16)
78 #define OMAP4_P2_MODE_CLEAR				(3 << 18)
79 #define OMAP4_P2_MODE_TLL				(1 << 18)
80 #define OMAP4_P2_MODE_HSIC				(3 << 18)
81 
82 #define	OMAP_UHH_DEBUG_CSR				(0x44)
83 
84 /* Values of UHH_REVISION - Note: these are not given in the TRM */
85 #define OMAP_USBHS_REV1		0x00000010	/* OMAP3 */
86 #define OMAP_USBHS_REV2		0x50700100	/* OMAP4 */
87 
88 #define is_omap_usbhs_rev1(x)	(x->usbhs_rev == OMAP_USBHS_REV1)
89 #define is_omap_usbhs_rev2(x)	(x->usbhs_rev == OMAP_USBHS_REV2)
90 
91 #define is_ehci_phy_mode(x)	(x == OMAP_EHCI_PORT_MODE_PHY)
92 #define is_ehci_tll_mode(x)	(x == OMAP_EHCI_PORT_MODE_TLL)
93 #define is_ehci_hsic_mode(x)	(x == OMAP_EHCI_PORT_MODE_HSIC)
94 
95 
96 struct usbhs_hcd_omap {
97 	int				nports;
98 	struct clk			**utmi_clk;
99 	struct clk			**hsic60m_clk;
100 	struct clk			**hsic480m_clk;
101 
102 	struct clk			*xclk60mhsp1_ck;
103 	struct clk			*xclk60mhsp2_ck;
104 	struct clk			*utmi_p1_gfclk;
105 	struct clk			*utmi_p2_gfclk;
106 	struct clk			*init_60m_fclk;
107 	struct clk			*ehci_logic_fck;
108 
109 	void __iomem			*uhh_base;
110 
111 	struct usbhs_omap_platform_data	*pdata;
112 
113 	u32				usbhs_rev;
114 };
115 /*-------------------------------------------------------------------------*/
116 
117 static const char usbhs_driver_name[] = USBHS_DRIVER_NAME;
118 static u64 usbhs_dmamask = DMA_BIT_MASK(32);
119 
120 /*-------------------------------------------------------------------------*/
121 
122 static inline void usbhs_write(void __iomem *base, u32 reg, u32 val)
123 {
124 	__raw_writel(val, base + reg);
125 }
126 
127 static inline u32 usbhs_read(void __iomem *base, u32 reg)
128 {
129 	return __raw_readl(base + reg);
130 }
131 
132 static inline void usbhs_writeb(void __iomem *base, u8 reg, u8 val)
133 {
134 	__raw_writeb(val, base + reg);
135 }
136 
137 static inline u8 usbhs_readb(void __iomem *base, u8 reg)
138 {
139 	return __raw_readb(base + reg);
140 }
141 
142 /*-------------------------------------------------------------------------*/
143 
144 /**
145  * Map 'enum usbhs_omap_port_mode' found in <linux/platform_data/usb-omap.h>
146  * to the device tree binding portN-mode found in
147  * 'Documentation/devicetree/bindings/mfd/omap-usb-host.txt'
148  */
149 static const char * const port_modes[] = {
150 	[OMAP_USBHS_PORT_MODE_UNUSED]	= "",
151 	[OMAP_EHCI_PORT_MODE_PHY]	= "ehci-phy",
152 	[OMAP_EHCI_PORT_MODE_TLL]	= "ehci-tll",
153 	[OMAP_EHCI_PORT_MODE_HSIC]	= "ehci-hsic",
154 	[OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0]	= "ohci-phy-6pin-datse0",
155 	[OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM]	= "ohci-phy-6pin-dpdm",
156 	[OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0]	= "ohci-phy-3pin-datse0",
157 	[OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM]	= "ohci-phy-4pin-dpdm",
158 	[OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0]	= "ohci-tll-6pin-datse0",
159 	[OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM]	= "ohci-tll-6pin-dpdm",
160 	[OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0]	= "ohci-tll-3pin-datse0",
161 	[OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM]	= "ohci-tll-4pin-dpdm",
162 	[OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0]	= "ohci-tll-2pin-datse0",
163 	[OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM]	= "ohci-tll-2pin-dpdm",
164 };
165 
166 /**
167  * omap_usbhs_get_dt_port_mode - Get the 'enum usbhs_omap_port_mode'
168  * from the port mode string.
169  * @mode: The port mode string, usually obtained from device tree.
170  *
171  * The function returns the 'enum usbhs_omap_port_mode' that matches the
172  * provided port mode string as per the port_modes table.
173  * If no match is found it returns -ENODEV
174  */
175 static const int omap_usbhs_get_dt_port_mode(const char *mode)
176 {
177 	int i;
178 
179 	for (i = 0; i < ARRAY_SIZE(port_modes); i++) {
180 		if (!strcmp(mode, port_modes[i]))
181 			return i;
182 	}
183 
184 	return -ENODEV;
185 }
186 
187 static struct platform_device *omap_usbhs_alloc_child(const char *name,
188 			struct resource	*res, int num_resources, void *pdata,
189 			size_t pdata_size, struct device *dev)
190 {
191 	struct platform_device	*child;
192 	int			ret;
193 
194 	child = platform_device_alloc(name, 0);
195 
196 	if (!child) {
197 		dev_err(dev, "platform_device_alloc %s failed\n", name);
198 		goto err_end;
199 	}
200 
201 	ret = platform_device_add_resources(child, res, num_resources);
202 	if (ret) {
203 		dev_err(dev, "platform_device_add_resources failed\n");
204 		goto err_alloc;
205 	}
206 
207 	ret = platform_device_add_data(child, pdata, pdata_size);
208 	if (ret) {
209 		dev_err(dev, "platform_device_add_data failed\n");
210 		goto err_alloc;
211 	}
212 
213 	child->dev.dma_mask		= &usbhs_dmamask;
214 	dma_set_coherent_mask(&child->dev, DMA_BIT_MASK(32));
215 	child->dev.parent		= dev;
216 
217 	ret = platform_device_add(child);
218 	if (ret) {
219 		dev_err(dev, "platform_device_add failed\n");
220 		goto err_alloc;
221 	}
222 
223 	return child;
224 
225 err_alloc:
226 	platform_device_put(child);
227 
228 err_end:
229 	return NULL;
230 }
231 
232 static int omap_usbhs_alloc_children(struct platform_device *pdev)
233 {
234 	struct device				*dev = &pdev->dev;
235 	struct usbhs_omap_platform_data		*pdata = dev_get_platdata(dev);
236 	struct platform_device			*ehci;
237 	struct platform_device			*ohci;
238 	struct resource				*res;
239 	struct resource				resources[2];
240 	int					ret;
241 
242 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ehci");
243 	if (!res) {
244 		dev_err(dev, "EHCI get resource IORESOURCE_MEM failed\n");
245 		ret = -ENODEV;
246 		goto err_end;
247 	}
248 	resources[0] = *res;
249 
250 	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ehci-irq");
251 	if (!res) {
252 		dev_err(dev, " EHCI get resource IORESOURCE_IRQ failed\n");
253 		ret = -ENODEV;
254 		goto err_end;
255 	}
256 	resources[1] = *res;
257 
258 	ehci = omap_usbhs_alloc_child(OMAP_EHCI_DEVICE, resources, 2, pdata,
259 		sizeof(*pdata), dev);
260 
261 	if (!ehci) {
262 		dev_err(dev, "omap_usbhs_alloc_child failed\n");
263 		ret = -ENOMEM;
264 		goto err_end;
265 	}
266 
267 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ohci");
268 	if (!res) {
269 		dev_err(dev, "OHCI get resource IORESOURCE_MEM failed\n");
270 		ret = -ENODEV;
271 		goto err_ehci;
272 	}
273 	resources[0] = *res;
274 
275 	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ohci-irq");
276 	if (!res) {
277 		dev_err(dev, "OHCI get resource IORESOURCE_IRQ failed\n");
278 		ret = -ENODEV;
279 		goto err_ehci;
280 	}
281 	resources[1] = *res;
282 
283 	ohci = omap_usbhs_alloc_child(OMAP_OHCI_DEVICE, resources, 2, pdata,
284 		sizeof(*pdata), dev);
285 	if (!ohci) {
286 		dev_err(dev, "omap_usbhs_alloc_child failed\n");
287 		ret = -ENOMEM;
288 		goto err_ehci;
289 	}
290 
291 	return 0;
292 
293 err_ehci:
294 	platform_device_unregister(ehci);
295 
296 err_end:
297 	return ret;
298 }
299 
300 static bool is_ohci_port(enum usbhs_omap_port_mode pmode)
301 {
302 	switch (pmode) {
303 	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
304 	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
305 	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
306 	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
307 	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
308 	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
309 	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
310 	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
311 	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
312 	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
313 		return true;
314 
315 	default:
316 		return false;
317 	}
318 }
319 
320 static int usbhs_runtime_resume(struct device *dev)
321 {
322 	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
323 	struct usbhs_omap_platform_data	*pdata = omap->pdata;
324 	int i, r;
325 
326 	dev_dbg(dev, "usbhs_runtime_resume\n");
327 
328 	omap_tll_enable(pdata);
329 
330 	if (!IS_ERR(omap->ehci_logic_fck))
331 		clk_prepare_enable(omap->ehci_logic_fck);
332 
333 	for (i = 0; i < omap->nports; i++) {
334 		switch (pdata->port_mode[i]) {
335 		case OMAP_EHCI_PORT_MODE_HSIC:
336 			if (!IS_ERR(omap->hsic60m_clk[i])) {
337 				r = clk_prepare_enable(omap->hsic60m_clk[i]);
338 				if (r) {
339 					dev_err(dev,
340 					 "Can't enable port %d hsic60m clk:%d\n",
341 					 i, r);
342 				}
343 			}
344 
345 			if (!IS_ERR(omap->hsic480m_clk[i])) {
346 				r = clk_prepare_enable(omap->hsic480m_clk[i]);
347 				if (r) {
348 					dev_err(dev,
349 					 "Can't enable port %d hsic480m clk:%d\n",
350 					 i, r);
351 				}
352 			}
353 		/* Fall through as HSIC mode needs utmi_clk */
354 
355 		case OMAP_EHCI_PORT_MODE_TLL:
356 			if (!IS_ERR(omap->utmi_clk[i])) {
357 				r = clk_prepare_enable(omap->utmi_clk[i]);
358 				if (r) {
359 					dev_err(dev,
360 					 "Can't enable port %d clk : %d\n",
361 					 i, r);
362 				}
363 			}
364 			break;
365 		default:
366 			break;
367 		}
368 	}
369 
370 	return 0;
371 }
372 
373 static int usbhs_runtime_suspend(struct device *dev)
374 {
375 	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
376 	struct usbhs_omap_platform_data	*pdata = omap->pdata;
377 	int i;
378 
379 	dev_dbg(dev, "usbhs_runtime_suspend\n");
380 
381 	for (i = 0; i < omap->nports; i++) {
382 		switch (pdata->port_mode[i]) {
383 		case OMAP_EHCI_PORT_MODE_HSIC:
384 			if (!IS_ERR(omap->hsic60m_clk[i]))
385 				clk_disable_unprepare(omap->hsic60m_clk[i]);
386 
387 			if (!IS_ERR(omap->hsic480m_clk[i]))
388 				clk_disable_unprepare(omap->hsic480m_clk[i]);
389 		/* Fall through as utmi_clks were used in HSIC mode */
390 
391 		case OMAP_EHCI_PORT_MODE_TLL:
392 			if (!IS_ERR(omap->utmi_clk[i]))
393 				clk_disable_unprepare(omap->utmi_clk[i]);
394 			break;
395 		default:
396 			break;
397 		}
398 	}
399 
400 	if (!IS_ERR(omap->ehci_logic_fck))
401 		clk_disable_unprepare(omap->ehci_logic_fck);
402 
403 	omap_tll_disable(pdata);
404 
405 	return 0;
406 }
407 
408 static unsigned omap_usbhs_rev1_hostconfig(struct usbhs_hcd_omap *omap,
409 						unsigned reg)
410 {
411 	struct usbhs_omap_platform_data	*pdata = omap->pdata;
412 	int i;
413 
414 	for (i = 0; i < omap->nports; i++) {
415 		switch (pdata->port_mode[i]) {
416 		case OMAP_USBHS_PORT_MODE_UNUSED:
417 			reg &= ~(OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS << i);
418 			break;
419 		case OMAP_EHCI_PORT_MODE_PHY:
420 			if (pdata->single_ulpi_bypass)
421 				break;
422 
423 			if (i == 0)
424 				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
425 			else
426 				reg &= ~(OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS
427 								<< (i-1));
428 			break;
429 		default:
430 			if (pdata->single_ulpi_bypass)
431 				break;
432 
433 			if (i == 0)
434 				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
435 			else
436 				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS
437 								<< (i-1);
438 			break;
439 		}
440 	}
441 
442 	if (pdata->single_ulpi_bypass) {
443 		/* bypass ULPI only if none of the ports use PHY mode */
444 		reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
445 
446 		for (i = 0; i < omap->nports; i++) {
447 			if (is_ehci_phy_mode(pdata->port_mode[i])) {
448 				reg &= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
449 				break;
450 			}
451 		}
452 	}
453 
454 	return reg;
455 }
456 
457 static unsigned omap_usbhs_rev2_hostconfig(struct usbhs_hcd_omap *omap,
458 						unsigned reg)
459 {
460 	struct usbhs_omap_platform_data	*pdata = omap->pdata;
461 	int i;
462 
463 	for (i = 0; i < omap->nports; i++) {
464 		/* Clear port mode fields for PHY mode */
465 		reg &= ~(OMAP4_P1_MODE_CLEAR << 2 * i);
466 
467 		if (is_ehci_tll_mode(pdata->port_mode[i]) ||
468 				(is_ohci_port(pdata->port_mode[i])))
469 			reg |= OMAP4_P1_MODE_TLL << 2 * i;
470 		else if (is_ehci_hsic_mode(pdata->port_mode[i]))
471 			reg |= OMAP4_P1_MODE_HSIC << 2 * i;
472 	}
473 
474 	return reg;
475 }
476 
477 static void omap_usbhs_init(struct device *dev)
478 {
479 	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
480 	unsigned			reg;
481 
482 	dev_dbg(dev, "starting TI HSUSB Controller\n");
483 
484 	pm_runtime_get_sync(dev);
485 
486 	reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
487 	/* setup ULPI bypass and burst configurations */
488 	reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
489 			| OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN
490 			| OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN);
491 	reg |= OMAP4_UHH_HOSTCONFIG_APP_START_CLK;
492 	reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;
493 
494 	switch (omap->usbhs_rev) {
495 	case OMAP_USBHS_REV1:
496 		reg = omap_usbhs_rev1_hostconfig(omap, reg);
497 		break;
498 
499 	case OMAP_USBHS_REV2:
500 		reg = omap_usbhs_rev2_hostconfig(omap, reg);
501 		break;
502 
503 	default:	/* newer revisions */
504 		reg = omap_usbhs_rev2_hostconfig(omap, reg);
505 		break;
506 	}
507 
508 	usbhs_write(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg);
509 	dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
510 
511 	pm_runtime_put_sync(dev);
512 }
513 
514 static int usbhs_omap_get_dt_pdata(struct device *dev,
515 					struct usbhs_omap_platform_data *pdata)
516 {
517 	int ret, i;
518 	struct device_node *node = dev->of_node;
519 
520 	ret = of_property_read_u32(node, "num-ports", &pdata->nports);
521 	if (ret)
522 		pdata->nports = 0;
523 
524 	if (pdata->nports > OMAP3_HS_USB_PORTS) {
525 		dev_warn(dev, "Too many num_ports <%d> in device tree. Max %d\n",
526 				pdata->nports, OMAP3_HS_USB_PORTS);
527 		return -ENODEV;
528 	}
529 
530 	/* get port modes */
531 	for (i = 0; i < OMAP3_HS_USB_PORTS; i++) {
532 		char prop[11];
533 		const char *mode;
534 
535 		pdata->port_mode[i] = OMAP_USBHS_PORT_MODE_UNUSED;
536 
537 		snprintf(prop, sizeof(prop), "port%d-mode", i + 1);
538 		ret = of_property_read_string(node, prop, &mode);
539 		if (ret < 0)
540 			continue;
541 
542 		ret = omap_usbhs_get_dt_port_mode(mode);
543 		if (ret < 0) {
544 			dev_warn(dev, "Invalid port%d-mode \"%s\" in device tree\n",
545 					i, mode);
546 			return -ENODEV;
547 		}
548 
549 		dev_dbg(dev, "port%d-mode: %s -> %d\n", i, mode, ret);
550 		pdata->port_mode[i] = ret;
551 	}
552 
553 	/* get flags */
554 	pdata->single_ulpi_bypass = of_property_read_bool(node,
555 						"single-ulpi-bypass");
556 
557 	return 0;
558 }
559 
560 static struct of_device_id usbhs_child_match_table[] = {
561 	{ .compatible = "ti,omap-ehci", },
562 	{ .compatible = "ti,omap-ohci", },
563 	{ }
564 };
565 
566 /**
567  * usbhs_omap_probe - initialize TI-based HCDs
568  *
569  * Allocates basic resources for this USB host controller.
570  */
571 static int usbhs_omap_probe(struct platform_device *pdev)
572 {
573 	struct device			*dev =  &pdev->dev;
574 	struct usbhs_omap_platform_data	*pdata = dev_get_platdata(dev);
575 	struct usbhs_hcd_omap		*omap;
576 	struct resource			*res;
577 	int				ret = 0;
578 	int				i;
579 	bool				need_logic_fck;
580 
581 	if (dev->of_node) {
582 		/* For DT boot we populate platform data from OF node */
583 		pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
584 		if (!pdata)
585 			return -ENOMEM;
586 
587 		ret = usbhs_omap_get_dt_pdata(dev, pdata);
588 		if (ret)
589 			return ret;
590 
591 		dev->platform_data = pdata;
592 	}
593 
594 	if (!pdata) {
595 		dev_err(dev, "Missing platform data\n");
596 		return -ENODEV;
597 	}
598 
599 	if (pdata->nports > OMAP3_HS_USB_PORTS) {
600 		dev_info(dev, "Too many num_ports <%d> in platform_data. Max %d\n",
601 				pdata->nports, OMAP3_HS_USB_PORTS);
602 		return -ENODEV;
603 	}
604 
605 	omap = devm_kzalloc(dev, sizeof(*omap), GFP_KERNEL);
606 	if (!omap) {
607 		dev_err(dev, "Memory allocation failed\n");
608 		return -ENOMEM;
609 	}
610 
611 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
612 	omap->uhh_base = devm_ioremap_resource(dev, res);
613 	if (IS_ERR(omap->uhh_base))
614 		return PTR_ERR(omap->uhh_base);
615 
616 	omap->pdata = pdata;
617 
618 	/* Initialize the TLL subsystem */
619 	omap_tll_init(pdata);
620 
621 	pm_runtime_enable(dev);
622 
623 	platform_set_drvdata(pdev, omap);
624 	pm_runtime_get_sync(dev);
625 
626 	omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
627 
628 	/* we need to call runtime suspend before we update omap->nports
629 	 * to prevent unbalanced clk_disable()
630 	 */
631 	pm_runtime_put_sync(dev);
632 
633 	/*
634 	 * If platform data contains nports then use that
635 	 * else make out number of ports from USBHS revision
636 	 */
637 	if (pdata->nports) {
638 		omap->nports = pdata->nports;
639 	} else {
640 		switch (omap->usbhs_rev) {
641 		case OMAP_USBHS_REV1:
642 			omap->nports = 3;
643 			break;
644 		case OMAP_USBHS_REV2:
645 			omap->nports = 2;
646 			break;
647 		default:
648 			omap->nports = OMAP3_HS_USB_PORTS;
649 			dev_dbg(dev,
650 			 "USB HOST Rev:0x%d not recognized, assuming %d ports\n",
651 			 omap->usbhs_rev, omap->nports);
652 			break;
653 		}
654 		pdata->nports = omap->nports;
655 	}
656 
657 	i = sizeof(struct clk *) * omap->nports;
658 	omap->utmi_clk = devm_kzalloc(dev, i, GFP_KERNEL);
659 	omap->hsic480m_clk = devm_kzalloc(dev, i, GFP_KERNEL);
660 	omap->hsic60m_clk = devm_kzalloc(dev, i, GFP_KERNEL);
661 
662 	if (!omap->utmi_clk || !omap->hsic480m_clk || !omap->hsic60m_clk) {
663 		dev_err(dev, "Memory allocation failed\n");
664 		ret = -ENOMEM;
665 		goto err_mem;
666 	}
667 
668 	need_logic_fck = false;
669 	for (i = 0; i < omap->nports; i++) {
670 		if (is_ehci_phy_mode(i) || is_ehci_tll_mode(i) ||
671 			is_ehci_hsic_mode(i))
672 				need_logic_fck |= true;
673 	}
674 
675 	omap->ehci_logic_fck = ERR_PTR(-EINVAL);
676 	if (need_logic_fck) {
677 		omap->ehci_logic_fck = clk_get(dev, "ehci_logic_fck");
678 		if (IS_ERR(omap->ehci_logic_fck)) {
679 			ret = PTR_ERR(omap->ehci_logic_fck);
680 			dev_dbg(dev, "ehci_logic_fck failed:%d\n", ret);
681 		}
682 	}
683 
684 	omap->utmi_p1_gfclk = clk_get(dev, "utmi_p1_gfclk");
685 	if (IS_ERR(omap->utmi_p1_gfclk)) {
686 		ret = PTR_ERR(omap->utmi_p1_gfclk);
687 		dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret);
688 		goto err_p1_gfclk;
689 	}
690 
691 	omap->utmi_p2_gfclk = clk_get(dev, "utmi_p2_gfclk");
692 	if (IS_ERR(omap->utmi_p2_gfclk)) {
693 		ret = PTR_ERR(omap->utmi_p2_gfclk);
694 		dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
695 		goto err_p2_gfclk;
696 	}
697 
698 	omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck");
699 	if (IS_ERR(omap->xclk60mhsp1_ck)) {
700 		ret = PTR_ERR(omap->xclk60mhsp1_ck);
701 		dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
702 		goto err_xclk60mhsp1;
703 	}
704 
705 	omap->xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck");
706 	if (IS_ERR(omap->xclk60mhsp2_ck)) {
707 		ret = PTR_ERR(omap->xclk60mhsp2_ck);
708 		dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
709 		goto err_xclk60mhsp2;
710 	}
711 
712 	omap->init_60m_fclk = clk_get(dev, "init_60m_fclk");
713 	if (IS_ERR(omap->init_60m_fclk)) {
714 		ret = PTR_ERR(omap->init_60m_fclk);
715 		dev_err(dev, "init_60m_fclk failed error:%d\n", ret);
716 		goto err_init60m;
717 	}
718 
719 	for (i = 0; i < omap->nports; i++) {
720 		char clkname[30];
721 
722 		/* clock names are indexed from 1*/
723 		snprintf(clkname, sizeof(clkname),
724 				"usb_host_hs_utmi_p%d_clk", i + 1);
725 
726 		/* If a clock is not found we won't bail out as not all
727 		 * platforms have all clocks and we can function without
728 		 * them
729 		 */
730 		omap->utmi_clk[i] = clk_get(dev, clkname);
731 		if (IS_ERR(omap->utmi_clk[i]))
732 			dev_dbg(dev, "Failed to get clock : %s : %ld\n",
733 				clkname, PTR_ERR(omap->utmi_clk[i]));
734 
735 		snprintf(clkname, sizeof(clkname),
736 				"usb_host_hs_hsic480m_p%d_clk", i + 1);
737 		omap->hsic480m_clk[i] = clk_get(dev, clkname);
738 		if (IS_ERR(omap->hsic480m_clk[i]))
739 			dev_dbg(dev, "Failed to get clock : %s : %ld\n",
740 				clkname, PTR_ERR(omap->hsic480m_clk[i]));
741 
742 		snprintf(clkname, sizeof(clkname),
743 				"usb_host_hs_hsic60m_p%d_clk", i + 1);
744 		omap->hsic60m_clk[i] = clk_get(dev, clkname);
745 		if (IS_ERR(omap->hsic60m_clk[i]))
746 			dev_dbg(dev, "Failed to get clock : %s : %ld\n",
747 				clkname, PTR_ERR(omap->hsic60m_clk[i]));
748 	}
749 
750 	if (is_ehci_phy_mode(pdata->port_mode[0])) {
751 		/* for OMAP3, clk_set_parent fails */
752 		ret = clk_set_parent(omap->utmi_p1_gfclk,
753 					omap->xclk60mhsp1_ck);
754 		if (ret != 0)
755 			dev_dbg(dev, "xclk60mhsp1_ck set parent failed: %d\n",
756 					ret);
757 	} else if (is_ehci_tll_mode(pdata->port_mode[0])) {
758 		ret = clk_set_parent(omap->utmi_p1_gfclk,
759 					omap->init_60m_fclk);
760 		if (ret != 0)
761 			dev_dbg(dev, "P0 init_60m_fclk set parent failed: %d\n",
762 					ret);
763 	}
764 
765 	if (is_ehci_phy_mode(pdata->port_mode[1])) {
766 		ret = clk_set_parent(omap->utmi_p2_gfclk,
767 					omap->xclk60mhsp2_ck);
768 		if (ret != 0)
769 			dev_dbg(dev, "xclk60mhsp2_ck set parent failed: %d\n",
770 					ret);
771 	} else if (is_ehci_tll_mode(pdata->port_mode[1])) {
772 		ret = clk_set_parent(omap->utmi_p2_gfclk,
773 						omap->init_60m_fclk);
774 		if (ret != 0)
775 			dev_dbg(dev, "P1 init_60m_fclk set parent failed: %d\n",
776 					ret);
777 	}
778 
779 	omap_usbhs_init(dev);
780 
781 	if (dev->of_node) {
782 		ret = of_platform_populate(dev->of_node,
783 				usbhs_child_match_table, NULL, dev);
784 
785 		if (ret) {
786 			dev_err(dev, "Failed to create DT children: %d\n", ret);
787 			goto err_alloc;
788 		}
789 
790 	} else {
791 		ret = omap_usbhs_alloc_children(pdev);
792 		if (ret) {
793 			dev_err(dev, "omap_usbhs_alloc_children failed: %d\n",
794 						ret);
795 			goto err_alloc;
796 		}
797 	}
798 
799 	return 0;
800 
801 err_alloc:
802 	for (i = 0; i < omap->nports; i++) {
803 		if (!IS_ERR(omap->utmi_clk[i]))
804 			clk_put(omap->utmi_clk[i]);
805 		if (!IS_ERR(omap->hsic60m_clk[i]))
806 			clk_put(omap->hsic60m_clk[i]);
807 		if (!IS_ERR(omap->hsic480m_clk[i]))
808 			clk_put(omap->hsic480m_clk[i]);
809 	}
810 
811 	clk_put(omap->init_60m_fclk);
812 
813 err_init60m:
814 	clk_put(omap->xclk60mhsp2_ck);
815 
816 err_xclk60mhsp2:
817 	clk_put(omap->xclk60mhsp1_ck);
818 
819 err_xclk60mhsp1:
820 	clk_put(omap->utmi_p2_gfclk);
821 
822 err_p2_gfclk:
823 	clk_put(omap->utmi_p1_gfclk);
824 
825 err_p1_gfclk:
826 	if (!IS_ERR(omap->ehci_logic_fck))
827 		clk_put(omap->ehci_logic_fck);
828 
829 err_mem:
830 	pm_runtime_disable(dev);
831 
832 	return ret;
833 }
834 
835 static int usbhs_omap_remove_child(struct device *dev, void *data)
836 {
837 	dev_info(dev, "unregistering\n");
838 	platform_device_unregister(to_platform_device(dev));
839 	return 0;
840 }
841 
842 /**
843  * usbhs_omap_remove - shutdown processing for UHH & TLL HCDs
844  * @pdev: USB Host Controller being removed
845  *
846  * Reverses the effect of usbhs_omap_probe().
847  */
848 static int usbhs_omap_remove(struct platform_device *pdev)
849 {
850 	struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
851 	int i;
852 
853 	for (i = 0; i < omap->nports; i++) {
854 		if (!IS_ERR(omap->utmi_clk[i]))
855 			clk_put(omap->utmi_clk[i]);
856 		if (!IS_ERR(omap->hsic60m_clk[i]))
857 			clk_put(omap->hsic60m_clk[i]);
858 		if (!IS_ERR(omap->hsic480m_clk[i]))
859 			clk_put(omap->hsic480m_clk[i]);
860 	}
861 
862 	clk_put(omap->init_60m_fclk);
863 	clk_put(omap->utmi_p1_gfclk);
864 	clk_put(omap->utmi_p2_gfclk);
865 	clk_put(omap->xclk60mhsp2_ck);
866 	clk_put(omap->xclk60mhsp1_ck);
867 
868 	if (!IS_ERR(omap->ehci_logic_fck))
869 		clk_put(omap->ehci_logic_fck);
870 
871 	pm_runtime_disable(&pdev->dev);
872 
873 	/* remove children */
874 	device_for_each_child(&pdev->dev, NULL, usbhs_omap_remove_child);
875 	return 0;
876 }
877 
878 static const struct dev_pm_ops usbhsomap_dev_pm_ops = {
879 	.runtime_suspend	= usbhs_runtime_suspend,
880 	.runtime_resume		= usbhs_runtime_resume,
881 };
882 
883 static const struct of_device_id usbhs_omap_dt_ids[] = {
884 	{ .compatible = "ti,usbhs-host" },
885 	{ }
886 };
887 
888 MODULE_DEVICE_TABLE(of, usbhs_omap_dt_ids);
889 
890 
891 static struct platform_driver usbhs_omap_driver = {
892 	.driver = {
893 		.name		= (char *)usbhs_driver_name,
894 		.owner		= THIS_MODULE,
895 		.pm		= &usbhsomap_dev_pm_ops,
896 		.of_match_table = usbhs_omap_dt_ids,
897 	},
898 	.remove		= usbhs_omap_remove,
899 };
900 
901 MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>");
902 MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");
903 MODULE_ALIAS("platform:" USBHS_DRIVER_NAME);
904 MODULE_LICENSE("GPL v2");
905 MODULE_DESCRIPTION("usb host common core driver for omap EHCI and OHCI");
906 
907 static int __init omap_usbhs_drvinit(void)
908 {
909 	return platform_driver_probe(&usbhs_omap_driver, usbhs_omap_probe);
910 }
911 
912 /*
913  * init before ehci and ohci drivers;
914  * The usbhs core driver should be initialized much before
915  * the omap ehci and ohci probe functions are called.
916  * This usbhs core driver should be initialized after
917  * usb tll driver
918  */
919 fs_initcall_sync(omap_usbhs_drvinit);
920 
921 static void __exit omap_usbhs_drvexit(void)
922 {
923 	platform_driver_unregister(&usbhs_omap_driver);
924 }
925 module_exit(omap_usbhs_drvexit);
926