1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 2 /* 3 * SPI core driver for the Ocelot chip family. 4 * 5 * This driver will handle everything necessary to allow for communication over 6 * SPI to the VSC7511, VSC7512, VSC7513 and VSC7514 chips. The main functions 7 * are to prepare the chip's SPI interface for a specific bus speed, and a host 8 * processor's endianness. This will create and distribute regmaps for any 9 * children. 10 * 11 * Copyright 2021-2022 Innovative Advantage Inc. 12 * 13 * Author: Colin Foster <colin.foster@in-advantage.com> 14 */ 15 16 #include <linux/device.h> 17 #include <linux/err.h> 18 #include <linux/errno.h> 19 #include <linux/export.h> 20 #include <linux/ioport.h> 21 #include <linux/mod_devicetable.h> 22 #include <linux/module.h> 23 #include <linux/regmap.h> 24 #include <linux/spi/spi.h> 25 #include <linux/types.h> 26 #include <linux/units.h> 27 28 #include "ocelot.h" 29 30 #define REG_DEV_CPUORG_IF_CTRL 0x0000 31 #define REG_DEV_CPUORG_IF_CFGSTAT 0x0004 32 33 #define CFGSTAT_IF_NUM_VCORE (0 << 24) 34 #define CFGSTAT_IF_NUM_VRAP (1 << 24) 35 #define CFGSTAT_IF_NUM_SI (2 << 24) 36 #define CFGSTAT_IF_NUM_MIIM (3 << 24) 37 38 #define VSC7512_DEVCPU_ORG_RES_START 0x71000000 39 #define VSC7512_DEVCPU_ORG_RES_SIZE 0x38 40 41 #define VSC7512_CHIP_REGS_RES_START 0x71070000 42 #define VSC7512_CHIP_REGS_RES_SIZE 0x14 43 44 static const struct resource vsc7512_dev_cpuorg_resource = 45 DEFINE_RES_REG_NAMED(VSC7512_DEVCPU_ORG_RES_START, 46 VSC7512_DEVCPU_ORG_RES_SIZE, 47 "devcpu_org"); 48 49 static const struct resource vsc7512_gcb_resource = 50 DEFINE_RES_REG_NAMED(VSC7512_CHIP_REGS_RES_START, 51 VSC7512_CHIP_REGS_RES_SIZE, 52 "devcpu_gcb_chip_regs"); 53 54 static int ocelot_spi_initialize(struct device *dev) 55 { 56 struct ocelot_ddata *ddata = dev_get_drvdata(dev); 57 u32 val, check; 58 int err; 59 60 val = OCELOT_SPI_BYTE_ORDER; 61 62 /* 63 * The SPI address must be big-endian, but we want the payload to match 64 * our CPU. These are two bits (0 and 1) but they're repeated such that 65 * the write from any configuration will be valid. The four 66 * configurations are: 67 * 68 * 0b00: little-endian, MSB first 69 * | 111111 | 22221111 | 33222222 | 70 * | 76543210 | 54321098 | 32109876 | 10987654 | 71 * 72 * 0b01: big-endian, MSB first 73 * | 33222222 | 22221111 | 111111 | | 74 * | 10987654 | 32109876 | 54321098 | 76543210 | 75 * 76 * 0b10: little-endian, LSB first 77 * | 111111 | 11112222 | 22222233 | 78 * | 01234567 | 89012345 | 67890123 | 45678901 | 79 * 80 * 0b11: big-endian, LSB first 81 * | 22222233 | 11112222 | 111111 | | 82 * | 45678901 | 67890123 | 89012345 | 01234567 | 83 */ 84 err = regmap_write(ddata->cpuorg_regmap, REG_DEV_CPUORG_IF_CTRL, val); 85 if (err) 86 return err; 87 88 /* 89 * Apply the number of padding bytes between a read request and the data 90 * payload. Some registers have access times of up to 1us, so if the 91 * first payload bit is shifted out too quickly, the read will fail. 92 */ 93 val = ddata->spi_padding_bytes; 94 err = regmap_write(ddata->cpuorg_regmap, REG_DEV_CPUORG_IF_CFGSTAT, val); 95 if (err) 96 return err; 97 98 /* 99 * After we write the interface configuration, read it back here. This 100 * will verify several different things. The first is that the number of 101 * padding bytes actually got written correctly. These are found in bits 102 * 0:3. 103 * 104 * The second is that bit 16 is cleared. Bit 16 is IF_CFGSTAT:IF_STAT, 105 * and will be set if the register access is too fast. This would be in 106 * the condition that the number of padding bytes is insufficient for 107 * the SPI bus frequency. 108 * 109 * The last check is for bits 31:24, which define the interface by which 110 * the registers are being accessed. Since we're accessing them via the 111 * serial interface, it must return IF_NUM_SI. 112 */ 113 check = val | CFGSTAT_IF_NUM_SI; 114 115 err = regmap_read(ddata->cpuorg_regmap, REG_DEV_CPUORG_IF_CFGSTAT, &val); 116 if (err) 117 return err; 118 119 if (check != val) 120 return -ENODEV; 121 122 return 0; 123 } 124 125 static const struct regmap_config ocelot_spi_regmap_config = { 126 .reg_bits = 24, 127 .reg_stride = 4, 128 .reg_downshift = 2, 129 .val_bits = 32, 130 131 .write_flag_mask = 0x80, 132 133 .use_single_write = true, 134 .can_multi_write = false, 135 136 .reg_format_endian = REGMAP_ENDIAN_BIG, 137 .val_format_endian = REGMAP_ENDIAN_NATIVE, 138 }; 139 140 static int ocelot_spi_regmap_bus_read(void *context, const void *reg, size_t reg_size, 141 void *val, size_t val_size) 142 { 143 struct spi_transfer xfers[3] = {0}; 144 struct device *dev = context; 145 struct ocelot_ddata *ddata; 146 struct spi_device *spi; 147 struct spi_message msg; 148 unsigned int index = 0; 149 150 ddata = dev_get_drvdata(dev); 151 spi = to_spi_device(dev); 152 153 xfers[index].tx_buf = reg; 154 xfers[index].len = reg_size; 155 index++; 156 157 if (ddata->spi_padding_bytes) { 158 xfers[index].len = ddata->spi_padding_bytes; 159 xfers[index].tx_buf = ddata->dummy_buf; 160 xfers[index].dummy_data = 1; 161 index++; 162 } 163 164 xfers[index].rx_buf = val; 165 xfers[index].len = val_size; 166 index++; 167 168 spi_message_init_with_transfers(&msg, xfers, index); 169 170 return spi_sync(spi, &msg); 171 } 172 173 static int ocelot_spi_regmap_bus_write(void *context, const void *data, size_t count) 174 { 175 struct device *dev = context; 176 struct spi_device *spi = to_spi_device(dev); 177 178 return spi_write(spi, data, count); 179 } 180 181 static const struct regmap_bus ocelot_spi_regmap_bus = { 182 .write = ocelot_spi_regmap_bus_write, 183 .read = ocelot_spi_regmap_bus_read, 184 }; 185 186 struct regmap *ocelot_spi_init_regmap(struct device *dev, const struct resource *res) 187 { 188 struct regmap_config regmap_config; 189 190 memcpy(®map_config, &ocelot_spi_regmap_config, sizeof(regmap_config)); 191 192 regmap_config.name = res->name; 193 regmap_config.max_register = resource_size(res) - 1; 194 regmap_config.reg_base = res->start; 195 196 return devm_regmap_init(dev, &ocelot_spi_regmap_bus, dev, ®map_config); 197 } 198 EXPORT_SYMBOL_NS(ocelot_spi_init_regmap, MFD_OCELOT_SPI); 199 200 static int ocelot_spi_probe(struct spi_device *spi) 201 { 202 struct device *dev = &spi->dev; 203 struct ocelot_ddata *ddata; 204 struct regmap *r; 205 int err; 206 207 ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL); 208 if (!ddata) 209 return -ENOMEM; 210 211 spi_set_drvdata(spi, ddata); 212 213 if (spi->max_speed_hz <= 500000) { 214 ddata->spi_padding_bytes = 0; 215 } else { 216 /* 217 * Calculation taken from the manual for IF_CFGSTAT:IF_CFG. 218 * Register access time is 1us, so we need to configure and send 219 * out enough padding bytes between the read request and data 220 * transmission that lasts at least 1 microsecond. 221 */ 222 ddata->spi_padding_bytes = 1 + (spi->max_speed_hz / HZ_PER_MHZ + 2) / 8; 223 224 ddata->dummy_buf = devm_kzalloc(dev, ddata->spi_padding_bytes, GFP_KERNEL); 225 if (!ddata->dummy_buf) 226 return -ENOMEM; 227 } 228 229 spi->bits_per_word = 8; 230 231 err = spi_setup(spi); 232 if (err) 233 return dev_err_probe(&spi->dev, err, "Error performing SPI setup\n"); 234 235 r = ocelot_spi_init_regmap(dev, &vsc7512_dev_cpuorg_resource); 236 if (IS_ERR(r)) 237 return PTR_ERR(r); 238 239 ddata->cpuorg_regmap = r; 240 241 r = ocelot_spi_init_regmap(dev, &vsc7512_gcb_resource); 242 if (IS_ERR(r)) 243 return PTR_ERR(r); 244 245 ddata->gcb_regmap = r; 246 247 /* 248 * The chip must be set up for SPI before it gets initialized and reset. 249 * This must be done before calling init, and after a chip reset is 250 * performed. 251 */ 252 err = ocelot_spi_initialize(dev); 253 if (err) 254 return dev_err_probe(dev, err, "Error initializing SPI bus\n"); 255 256 err = ocelot_chip_reset(dev); 257 if (err) 258 return dev_err_probe(dev, err, "Error resetting device\n"); 259 260 /* 261 * A chip reset will clear the SPI configuration, so it needs to be done 262 * again before we can access any registers. 263 */ 264 err = ocelot_spi_initialize(dev); 265 if (err) 266 return dev_err_probe(dev, err, "Error initializing SPI bus after reset\n"); 267 268 err = ocelot_core_init(dev); 269 if (err) 270 return dev_err_probe(dev, err, "Error initializing Ocelot core\n"); 271 272 return 0; 273 } 274 275 static const struct spi_device_id ocelot_spi_ids[] = { 276 { "vsc7512", 0 }, 277 { } 278 }; 279 MODULE_DEVICE_TABLE(spi, ocelot_spi_ids); 280 281 static const struct of_device_id ocelot_spi_of_match[] = { 282 { .compatible = "mscc,vsc7512" }, 283 { } 284 }; 285 MODULE_DEVICE_TABLE(of, ocelot_spi_of_match); 286 287 static struct spi_driver ocelot_spi_driver = { 288 .driver = { 289 .name = "ocelot-soc", 290 .of_match_table = ocelot_spi_of_match, 291 }, 292 .id_table = ocelot_spi_ids, 293 .probe = ocelot_spi_probe, 294 }; 295 module_spi_driver(ocelot_spi_driver); 296 297 MODULE_DESCRIPTION("SPI Controlled Ocelot Chip Driver"); 298 MODULE_AUTHOR("Colin Foster <colin.foster@in-advantage.com>"); 299 MODULE_LICENSE("Dual MIT/GPL"); 300 MODULE_IMPORT_NS(MFD_OCELOT); 301