xref: /openbmc/linux/drivers/mfd/max77714.c (revision 657c45b3)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Maxim MAX77714 Core Driver
4  *
5  * Copyright (C) 2022 Luca Ceresoli
6  * Author: Luca Ceresoli <luca.ceresoli@bootlin.com>
7  */
8 
9 #include <linux/i2c.h>
10 #include <linux/interrupt.h>
11 #include <linux/mfd/core.h>
12 #include <linux/mfd/max77714.h>
13 #include <linux/module.h>
14 #include <linux/of.h>
15 #include <linux/regmap.h>
16 
17 static const struct mfd_cell max77714_cells[] = {
18 	{ .name = "max77714-watchdog" },
19 	{ .name = "max77714-rtc" },
20 };
21 
22 static const struct regmap_range max77714_readable_ranges[] = {
23 	regmap_reg_range(MAX77714_INT_TOP,     MAX77714_INT_TOP),
24 	regmap_reg_range(MAX77714_INT_TOPM,    MAX77714_INT_TOPM),
25 	regmap_reg_range(MAX77714_32K_STATUS,  MAX77714_32K_CONFIG),
26 	regmap_reg_range(MAX77714_CNFG_GLBL2,  MAX77714_CNFG2_ONOFF),
27 };
28 
29 static const struct regmap_range max77714_writable_ranges[] = {
30 	regmap_reg_range(MAX77714_INT_TOPM,    MAX77714_INT_TOPM),
31 	regmap_reg_range(MAX77714_32K_CONFIG,  MAX77714_32K_CONFIG),
32 	regmap_reg_range(MAX77714_CNFG_GLBL2,  MAX77714_CNFG2_ONOFF),
33 };
34 
35 static const struct regmap_access_table max77714_readable_table = {
36 	.yes_ranges = max77714_readable_ranges,
37 	.n_yes_ranges = ARRAY_SIZE(max77714_readable_ranges),
38 };
39 
40 static const struct regmap_access_table max77714_writable_table = {
41 	.yes_ranges = max77714_writable_ranges,
42 	.n_yes_ranges = ARRAY_SIZE(max77714_writable_ranges),
43 };
44 
45 static const struct regmap_config max77714_regmap_config = {
46 	.reg_bits = 8,
47 	.val_bits = 8,
48 	.max_register = MAX77714_CNFG2_ONOFF,
49 	.rd_table = &max77714_readable_table,
50 	.wr_table = &max77714_writable_table,
51 };
52 
53 static const struct regmap_irq max77714_top_irqs[] = {
54 	REGMAP_IRQ_REG(MAX77714_IRQ_TOP_ONOFF,   0, MAX77714_INT_TOP_ONOFF),
55 	REGMAP_IRQ_REG(MAX77714_IRQ_TOP_RTC,     0, MAX77714_INT_TOP_RTC),
56 	REGMAP_IRQ_REG(MAX77714_IRQ_TOP_GPIO,    0, MAX77714_INT_TOP_GPIO),
57 	REGMAP_IRQ_REG(MAX77714_IRQ_TOP_LDO,     0, MAX77714_INT_TOP_LDO),
58 	REGMAP_IRQ_REG(MAX77714_IRQ_TOP_SD,      0, MAX77714_INT_TOP_SD),
59 	REGMAP_IRQ_REG(MAX77714_IRQ_TOP_GLBL,    0, MAX77714_INT_TOP_GLBL),
60 };
61 
62 static const struct regmap_irq_chip max77714_irq_chip = {
63 	.name			= "max77714-pmic",
64 	.status_base		= MAX77714_INT_TOP,
65 	.mask_base		= MAX77714_INT_TOPM,
66 	.num_regs		= 1,
67 	.irqs			= max77714_top_irqs,
68 	.num_irqs		= ARRAY_SIZE(max77714_top_irqs),
69 };
70 
71 /*
72  * MAX77714 initially uses the internal, low precision oscillator. Enable
73  * the external oscillator by setting the XOSC_RETRY bit. If the external
74  * oscillator is not OK (probably not installed) this has no effect.
75  */
76 static int max77714_setup_xosc(struct device *dev, struct regmap *regmap)
77 {
78 	/* Internal Crystal Load Capacitance, indexed by value of 32KLOAD bits */
79 	static const unsigned int load_cap[4] = {0, 10, 12, 22}; /* pF */
80 	unsigned int load_cap_idx;
81 	unsigned int status;
82 	int err;
83 
84 	err = regmap_update_bits(regmap, MAX77714_32K_CONFIG,
85 				 MAX77714_32K_CONFIG_XOSC_RETRY,
86 				 MAX77714_32K_CONFIG_XOSC_RETRY);
87 	if (err)
88 		return dev_err_probe(dev, err, "Failed to configure the external oscillator\n");
89 
90 	err = regmap_read(regmap, MAX77714_32K_STATUS, &status);
91 	if (err)
92 		return dev_err_probe(dev, err, "Failed to read external oscillator status\n");
93 
94 	load_cap_idx = (status >> MAX77714_32K_STATUS_32KLOAD_SHF)
95 		& MAX77714_32K_STATUS_32KLOAD_MSK;
96 
97 	dev_info(dev, "Using %s oscillator, %d pF load cap\n",
98 		 status & MAX77714_32K_STATUS_32KSOURCE ? "internal" : "external",
99 		 load_cap[load_cap_idx]);
100 
101 	return 0;
102 }
103 
104 static int max77714_probe(struct i2c_client *client)
105 {
106 	struct device *dev = &client->dev;
107 	struct regmap *regmap;
108 	struct regmap_irq_chip_data *irq_data;
109 	int err;
110 
111 	regmap = devm_regmap_init_i2c(client, &max77714_regmap_config);
112 	if (IS_ERR(regmap))
113 		return dev_err_probe(dev, PTR_ERR(regmap),
114 				     "Failed to initialise regmap\n");
115 
116 	err = max77714_setup_xosc(dev, regmap);
117 	if (err)
118 		return err;
119 
120 	err = devm_regmap_add_irq_chip(dev, regmap, client->irq,
121 				       IRQF_ONESHOT | IRQF_SHARED, 0,
122 				       &max77714_irq_chip, &irq_data);
123 	if (err)
124 		return dev_err_probe(dev, err, "Failed to add PMIC IRQ chip\n");
125 
126 	err =  devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
127 				    max77714_cells, ARRAY_SIZE(max77714_cells),
128 				    NULL, 0, NULL);
129 	if (err)
130 		return dev_err_probe(dev, err, "Failed to register child devices\n");
131 
132 	return 0;
133 }
134 
135 static const struct of_device_id max77714_dt_match[] = {
136 	{ .compatible = "maxim,max77714" },
137 	{},
138 };
139 MODULE_DEVICE_TABLE(of, max77714_dt_match);
140 
141 static struct i2c_driver max77714_driver = {
142 	.driver = {
143 		.name = "max77714",
144 		.of_match_table = max77714_dt_match,
145 	},
146 	.probe = max77714_probe,
147 };
148 module_i2c_driver(max77714_driver);
149 
150 MODULE_DESCRIPTION("Maxim MAX77714 MFD core driver");
151 MODULE_AUTHOR("Luca Ceresoli <luca.ceresoli@bootlin.com>");
152 MODULE_LICENSE("GPL");
153