xref: /openbmc/linux/drivers/mfd/madera-core.c (revision 20e2fc42)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Core MFD support for Cirrus Logic Madera codecs
4  *
5  * Copyright (C) 2015-2018 Cirrus Logic
6  */
7 
8 #include <linux/device.h>
9 #include <linux/delay.h>
10 #include <linux/err.h>
11 #include <linux/gpio.h>
12 #include <linux/mfd/core.h>
13 #include <linux/module.h>
14 #include <linux/mutex.h>
15 #include <linux/notifier.h>
16 #include <linux/of.h>
17 #include <linux/of_gpio.h>
18 #include <linux/platform_device.h>
19 #include <linux/pm_runtime.h>
20 #include <linux/regmap.h>
21 #include <linux/regulator/consumer.h>
22 #include <linux/regulator/machine.h>
23 #include <linux/regulator/of_regulator.h>
24 
25 #include <linux/mfd/madera/core.h>
26 #include <linux/mfd/madera/registers.h>
27 
28 #include "madera.h"
29 
30 #define CS47L15_SILICON_ID	0x6370
31 #define CS47L35_SILICON_ID	0x6360
32 #define CS47L85_SILICON_ID	0x6338
33 #define CS47L90_SILICON_ID	0x6364
34 #define CS47L92_SILICON_ID	0x6371
35 
36 #define MADERA_32KZ_MCLK2	1
37 
38 static const char * const madera_core_supplies[] = {
39 	"AVDD",
40 	"DBVDD1",
41 };
42 
43 static const struct mfd_cell madera_ldo1_devs[] = {
44 	{ .name = "madera-ldo1" },
45 };
46 
47 static const char * const cs47l15_supplies[] = {
48 	"MICVDD",
49 	"CPVDD1",
50 	"SPKVDD",
51 };
52 
53 static const struct mfd_cell cs47l15_devs[] = {
54 	{ .name = "madera-pinctrl", },
55 	{ .name = "madera-irq" },
56 	{ .name = "madera-gpio" },
57 	{
58 		.name = "madera-extcon",
59 		.parent_supplies = cs47l15_supplies,
60 		.num_parent_supplies = 1, /* We only need MICVDD */
61 	},
62 	{
63 		.name = "cs47l15-codec",
64 		.parent_supplies = cs47l15_supplies,
65 		.num_parent_supplies = ARRAY_SIZE(cs47l15_supplies),
66 	},
67 };
68 
69 static const char * const cs47l35_supplies[] = {
70 	"MICVDD",
71 	"DBVDD2",
72 	"CPVDD1",
73 	"CPVDD2",
74 	"SPKVDD",
75 };
76 
77 static const struct mfd_cell cs47l35_devs[] = {
78 	{ .name = "madera-pinctrl", },
79 	{ .name = "madera-irq", },
80 	{ .name = "madera-micsupp", },
81 	{ .name = "madera-gpio", },
82 	{
83 		.name = "madera-extcon",
84 		.parent_supplies = cs47l35_supplies,
85 		.num_parent_supplies = 1, /* We only need MICVDD */
86 	},
87 	{
88 		.name = "cs47l35-codec",
89 		.parent_supplies = cs47l35_supplies,
90 		.num_parent_supplies = ARRAY_SIZE(cs47l35_supplies),
91 	},
92 };
93 
94 static const char * const cs47l85_supplies[] = {
95 	"MICVDD",
96 	"DBVDD2",
97 	"DBVDD3",
98 	"DBVDD4",
99 	"CPVDD1",
100 	"CPVDD2",
101 	"SPKVDDL",
102 	"SPKVDDR",
103 };
104 
105 static const struct mfd_cell cs47l85_devs[] = {
106 	{ .name = "madera-pinctrl", },
107 	{ .name = "madera-irq", },
108 	{ .name = "madera-micsupp" },
109 	{ .name = "madera-gpio", },
110 	{
111 		.name = "madera-extcon",
112 		.parent_supplies = cs47l85_supplies,
113 		.num_parent_supplies = 1, /* We only need MICVDD */
114 	},
115 	{
116 		.name = "cs47l85-codec",
117 		.parent_supplies = cs47l85_supplies,
118 		.num_parent_supplies = ARRAY_SIZE(cs47l85_supplies),
119 	},
120 };
121 
122 static const char * const cs47l90_supplies[] = {
123 	"MICVDD",
124 	"DBVDD2",
125 	"DBVDD3",
126 	"DBVDD4",
127 	"CPVDD1",
128 	"CPVDD2",
129 };
130 
131 static const struct mfd_cell cs47l90_devs[] = {
132 	{ .name = "madera-pinctrl", },
133 	{ .name = "madera-irq", },
134 	{ .name = "madera-micsupp", },
135 	{ .name = "madera-gpio", },
136 	{
137 		.name = "madera-extcon",
138 		.parent_supplies = cs47l90_supplies,
139 		.num_parent_supplies = 1, /* We only need MICVDD */
140 	},
141 	{
142 		.name = "cs47l90-codec",
143 		.parent_supplies = cs47l90_supplies,
144 		.num_parent_supplies = ARRAY_SIZE(cs47l90_supplies),
145 	},
146 };
147 
148 static const char * const cs47l92_supplies[] = {
149 	"MICVDD",
150 	"CPVDD1",
151 	"CPVDD2",
152 };
153 
154 static const struct mfd_cell cs47l92_devs[] = {
155 	{ .name = "madera-pinctrl" },
156 	{ .name = "madera-irq", },
157 	{ .name = "madera-micsupp", },
158 	{ .name = "madera-gpio" },
159 	{
160 		.name = "madera-extcon",
161 		.parent_supplies = cs47l92_supplies,
162 		.num_parent_supplies = 1, /* We only need MICVDD */
163 	},
164 	{
165 		.name = "cs47l92-codec",
166 		.parent_supplies = cs47l92_supplies,
167 		.num_parent_supplies = ARRAY_SIZE(cs47l92_supplies),
168 	},
169 };
170 
171 /* Used by madera-i2c and madera-spi drivers */
172 const char *madera_name_from_type(enum madera_type type)
173 {
174 	switch (type) {
175 	case CS47L15:
176 		return "CS47L15";
177 	case CS47L35:
178 		return "CS47L35";
179 	case CS47L85:
180 		return "CS47L85";
181 	case CS47L90:
182 		return "CS47L90";
183 	case CS47L91:
184 		return "CS47L91";
185 	case CS42L92:
186 		return "CS42L92";
187 	case CS47L92:
188 		return "CS47L92";
189 	case CS47L93:
190 		return "CS47L93";
191 	case WM1840:
192 		return "WM1840";
193 	default:
194 		return "Unknown";
195 	}
196 }
197 EXPORT_SYMBOL_GPL(madera_name_from_type);
198 
199 #define MADERA_BOOT_POLL_INTERVAL_USEC		5000
200 #define MADERA_BOOT_POLL_TIMEOUT_USEC		25000
201 
202 static int madera_wait_for_boot(struct madera *madera)
203 {
204 	ktime_t timeout;
205 	unsigned int val = 0;
206 	int ret = 0;
207 
208 	/*
209 	 * We can't use an interrupt as we need to runtime resume to do so,
210 	 * so we poll the status bit. This won't race with the interrupt
211 	 * handler because it will be blocked on runtime resume.
212 	 * The chip could NAK a read request while it is booting so ignore
213 	 * errors from regmap_read.
214 	 */
215 	timeout = ktime_add_us(ktime_get(), MADERA_BOOT_POLL_TIMEOUT_USEC);
216 	regmap_read(madera->regmap, MADERA_IRQ1_RAW_STATUS_1, &val);
217 	while (!(val & MADERA_BOOT_DONE_STS1) &&
218 	       !ktime_after(ktime_get(), timeout)) {
219 		usleep_range(MADERA_BOOT_POLL_INTERVAL_USEC / 2,
220 			     MADERA_BOOT_POLL_INTERVAL_USEC);
221 		regmap_read(madera->regmap, MADERA_IRQ1_RAW_STATUS_1, &val);
222 	}
223 
224 	if (!(val & MADERA_BOOT_DONE_STS1)) {
225 		dev_err(madera->dev, "Polling BOOT_DONE_STS timed out\n");
226 		ret = -ETIMEDOUT;
227 	}
228 
229 	/*
230 	 * BOOT_DONE defaults to unmasked on boot so we must ack it.
231 	 * Do this even after a timeout to avoid interrupt storms.
232 	 */
233 	regmap_write(madera->regmap, MADERA_IRQ1_STATUS_1,
234 		     MADERA_BOOT_DONE_EINT1);
235 
236 	pm_runtime_mark_last_busy(madera->dev);
237 
238 	return ret;
239 }
240 
241 static int madera_soft_reset(struct madera *madera)
242 {
243 	int ret;
244 
245 	ret = regmap_write(madera->regmap, MADERA_SOFTWARE_RESET, 0);
246 	if (ret != 0) {
247 		dev_err(madera->dev, "Failed to soft reset device: %d\n", ret);
248 		return ret;
249 	}
250 
251 	/* Allow time for internal clocks to startup after reset */
252 	usleep_range(1000, 2000);
253 
254 	return 0;
255 }
256 
257 static void madera_enable_hard_reset(struct madera *madera)
258 {
259 	if (!madera->pdata.reset)
260 		return;
261 
262 	/*
263 	 * There are many existing out-of-tree users of these codecs that we
264 	 * can't break so preserve the expected behaviour of setting the line
265 	 * low to assert reset.
266 	 */
267 	gpiod_set_raw_value_cansleep(madera->pdata.reset, 0);
268 }
269 
270 static void madera_disable_hard_reset(struct madera *madera)
271 {
272 	if (!madera->pdata.reset)
273 		return;
274 
275 	gpiod_set_raw_value_cansleep(madera->pdata.reset, 1);
276 	usleep_range(1000, 2000);
277 }
278 
279 static int __maybe_unused madera_runtime_resume(struct device *dev)
280 {
281 	struct madera *madera = dev_get_drvdata(dev);
282 	int ret;
283 
284 	dev_dbg(dev, "Leaving sleep mode\n");
285 
286 	ret = regulator_enable(madera->dcvdd);
287 	if (ret) {
288 		dev_err(dev, "Failed to enable DCVDD: %d\n", ret);
289 		return ret;
290 	}
291 
292 	regcache_cache_only(madera->regmap, false);
293 	regcache_cache_only(madera->regmap_32bit, false);
294 
295 	ret = madera_wait_for_boot(madera);
296 	if (ret)
297 		goto err;
298 
299 	ret = regcache_sync(madera->regmap);
300 	if (ret) {
301 		dev_err(dev, "Failed to restore 16-bit register cache\n");
302 		goto err;
303 	}
304 
305 	ret = regcache_sync(madera->regmap_32bit);
306 	if (ret) {
307 		dev_err(dev, "Failed to restore 32-bit register cache\n");
308 		goto err;
309 	}
310 
311 	return 0;
312 
313 err:
314 	regcache_cache_only(madera->regmap_32bit, true);
315 	regcache_cache_only(madera->regmap, true);
316 	regulator_disable(madera->dcvdd);
317 
318 	return ret;
319 }
320 
321 static int __maybe_unused madera_runtime_suspend(struct device *dev)
322 {
323 	struct madera *madera = dev_get_drvdata(dev);
324 
325 	dev_dbg(madera->dev, "Entering sleep mode\n");
326 
327 	regcache_cache_only(madera->regmap, true);
328 	regcache_mark_dirty(madera->regmap);
329 	regcache_cache_only(madera->regmap_32bit, true);
330 	regcache_mark_dirty(madera->regmap_32bit);
331 
332 	regulator_disable(madera->dcvdd);
333 
334 	return 0;
335 }
336 
337 const struct dev_pm_ops madera_pm_ops = {
338 	SET_RUNTIME_PM_OPS(madera_runtime_suspend,
339 			   madera_runtime_resume,
340 			   NULL)
341 };
342 EXPORT_SYMBOL_GPL(madera_pm_ops);
343 
344 const struct of_device_id madera_of_match[] = {
345 	{ .compatible = "cirrus,cs47l15", .data = (void *)CS47L15 },
346 	{ .compatible = "cirrus,cs47l35", .data = (void *)CS47L35 },
347 	{ .compatible = "cirrus,cs47l85", .data = (void *)CS47L85 },
348 	{ .compatible = "cirrus,cs47l90", .data = (void *)CS47L90 },
349 	{ .compatible = "cirrus,cs47l91", .data = (void *)CS47L91 },
350 	{ .compatible = "cirrus,cs42l92", .data = (void *)CS42L92 },
351 	{ .compatible = "cirrus,cs47l92", .data = (void *)CS47L92 },
352 	{ .compatible = "cirrus,cs47l93", .data = (void *)CS47L93 },
353 	{ .compatible = "cirrus,wm1840", .data = (void *)WM1840 },
354 	{}
355 };
356 MODULE_DEVICE_TABLE(of, madera_of_match);
357 EXPORT_SYMBOL_GPL(madera_of_match);
358 
359 static int madera_get_reset_gpio(struct madera *madera)
360 {
361 	struct gpio_desc *reset;
362 	int ret;
363 
364 	if (madera->pdata.reset)
365 		return 0;
366 
367 	reset = devm_gpiod_get_optional(madera->dev, "reset", GPIOD_OUT_LOW);
368 	if (IS_ERR(reset)) {
369 		ret = PTR_ERR(reset);
370 		if (ret != -EPROBE_DEFER)
371 			dev_err(madera->dev, "Failed to request /RESET: %d\n",
372 				ret);
373 		return ret;
374 	}
375 
376 	/*
377 	 * A hard reset is needed for full reset of the chip. We allow running
378 	 * without hard reset only because it can be useful for early
379 	 * prototyping and some debugging, but we need to warn it's not ideal.
380 	 */
381 	if (!reset)
382 		dev_warn(madera->dev,
383 			 "Running without reset GPIO is not recommended\n");
384 
385 	madera->pdata.reset = reset;
386 
387 	return 0;
388 }
389 
390 static void madera_set_micbias_info(struct madera *madera)
391 {
392 	/*
393 	 * num_childbias is an array because future codecs can have different
394 	 * childbiases for each micbias. Unspecified values default to 0.
395 	 */
396 	switch (madera->type) {
397 	case CS47L15:
398 		madera->num_micbias = 1;
399 		madera->num_childbias[0] = 3;
400 		return;
401 	case CS47L35:
402 		madera->num_micbias = 2;
403 		madera->num_childbias[0] = 2;
404 		madera->num_childbias[1] = 2;
405 		return;
406 	case CS47L85:
407 	case WM1840:
408 		madera->num_micbias = 4;
409 		/* no child biases */
410 		return;
411 	case CS47L90:
412 	case CS47L91:
413 		madera->num_micbias = 2;
414 		madera->num_childbias[0] = 4;
415 		madera->num_childbias[1] = 4;
416 		return;
417 	case CS42L92:
418 	case CS47L92:
419 	case CS47L93:
420 		madera->num_micbias = 2;
421 		madera->num_childbias[0] = 4;
422 		madera->num_childbias[1] = 2;
423 		return;
424 	default:
425 		return;
426 	}
427 }
428 
429 int madera_dev_init(struct madera *madera)
430 {
431 	struct device *dev = madera->dev;
432 	unsigned int hwid;
433 	int (*patch_fn)(struct madera *) = NULL;
434 	const struct mfd_cell *mfd_devs;
435 	int n_devs = 0;
436 	int i, ret;
437 
438 	dev_set_drvdata(madera->dev, madera);
439 	BLOCKING_INIT_NOTIFIER_HEAD(&madera->notifier);
440 	mutex_init(&madera->dapm_ptr_lock);
441 
442 	madera_set_micbias_info(madera);
443 
444 	/*
445 	 * We need writable hw config info that all children can share.
446 	 * Simplest to take one shared copy of pdata struct.
447 	 */
448 	if (dev_get_platdata(madera->dev)) {
449 		memcpy(&madera->pdata, dev_get_platdata(madera->dev),
450 		       sizeof(madera->pdata));
451 	}
452 
453 	ret = madera_get_reset_gpio(madera);
454 	if (ret)
455 		return ret;
456 
457 	regcache_cache_only(madera->regmap, true);
458 	regcache_cache_only(madera->regmap_32bit, true);
459 
460 	for (i = 0; i < ARRAY_SIZE(madera_core_supplies); i++)
461 		madera->core_supplies[i].supply = madera_core_supplies[i];
462 
463 	madera->num_core_supplies = ARRAY_SIZE(madera_core_supplies);
464 
465 	/*
466 	 * On some codecs DCVDD could be supplied by the internal LDO1.
467 	 * For those we must add the LDO1 driver before requesting DCVDD
468 	 * No devm_ because we need to control shutdown order of children.
469 	 */
470 	switch (madera->type) {
471 	case CS47L15:
472 	case CS47L35:
473 	case CS47L90:
474 	case CS47L91:
475 	case CS42L92:
476 	case CS47L92:
477 	case CS47L93:
478 		break;
479 	case CS47L85:
480 	case WM1840:
481 		ret = mfd_add_devices(madera->dev, PLATFORM_DEVID_NONE,
482 				      madera_ldo1_devs,
483 				      ARRAY_SIZE(madera_ldo1_devs),
484 				      NULL, 0, NULL);
485 		if (ret) {
486 			dev_err(dev, "Failed to add LDO1 child: %d\n", ret);
487 			return ret;
488 		}
489 		break;
490 	default:
491 		/* No point continuing if the type is unknown */
492 		dev_err(madera->dev, "Unknown device type %d\n", madera->type);
493 		return -ENODEV;
494 	}
495 
496 	ret = devm_regulator_bulk_get(dev, madera->num_core_supplies,
497 				      madera->core_supplies);
498 	if (ret) {
499 		dev_err(dev, "Failed to request core supplies: %d\n", ret);
500 		goto err_devs;
501 	}
502 
503 	/*
504 	 * Don't use devres here. If the regulator is one of our children it
505 	 * will already have been removed before devres cleanup on this mfd
506 	 * driver tries to call put() on it. We need control of shutdown order.
507 	 */
508 	madera->dcvdd = regulator_get(madera->dev, "DCVDD");
509 	if (IS_ERR(madera->dcvdd)) {
510 		ret = PTR_ERR(madera->dcvdd);
511 		dev_err(dev, "Failed to request DCVDD: %d\n", ret);
512 		goto err_devs;
513 	}
514 
515 	ret = regulator_bulk_enable(madera->num_core_supplies,
516 				    madera->core_supplies);
517 	if (ret) {
518 		dev_err(dev, "Failed to enable core supplies: %d\n", ret);
519 		goto err_dcvdd;
520 	}
521 
522 	ret = regulator_enable(madera->dcvdd);
523 	if (ret) {
524 		dev_err(dev, "Failed to enable DCVDD: %d\n", ret);
525 		goto err_enable;
526 	}
527 
528 	madera_disable_hard_reset(madera);
529 
530 	regcache_cache_only(madera->regmap, false);
531 	regcache_cache_only(madera->regmap_32bit, false);
532 
533 	/*
534 	 * Now we can power up and verify that this is a chip we know about
535 	 * before we start doing any writes to its registers.
536 	 */
537 	ret = regmap_read(madera->regmap, MADERA_SOFTWARE_RESET, &hwid);
538 	if (ret) {
539 		dev_err(dev, "Failed to read ID register: %d\n", ret);
540 		goto err_reset;
541 	}
542 
543 	switch (hwid) {
544 	case CS47L15_SILICON_ID:
545 		if (IS_ENABLED(CONFIG_MFD_CS47L15)) {
546 			switch (madera->type) {
547 			case CS47L15:
548 				patch_fn = &cs47l15_patch;
549 				mfd_devs = cs47l15_devs;
550 				n_devs = ARRAY_SIZE(cs47l15_devs);
551 				break;
552 			default:
553 				break;
554 			}
555 		}
556 		break;
557 	case CS47L35_SILICON_ID:
558 		if (IS_ENABLED(CONFIG_MFD_CS47L35)) {
559 			switch (madera->type) {
560 			case CS47L35:
561 				patch_fn = cs47l35_patch;
562 				mfd_devs = cs47l35_devs;
563 				n_devs = ARRAY_SIZE(cs47l35_devs);
564 				break;
565 			default:
566 				break;
567 			}
568 		}
569 		break;
570 	case CS47L85_SILICON_ID:
571 		if (IS_ENABLED(CONFIG_MFD_CS47L85)) {
572 			switch (madera->type) {
573 			case CS47L85:
574 			case WM1840:
575 				patch_fn = cs47l85_patch;
576 				mfd_devs = cs47l85_devs;
577 				n_devs = ARRAY_SIZE(cs47l85_devs);
578 				break;
579 			default:
580 				break;
581 			}
582 		}
583 		break;
584 	case CS47L90_SILICON_ID:
585 		if (IS_ENABLED(CONFIG_MFD_CS47L90)) {
586 			switch (madera->type) {
587 			case CS47L90:
588 			case CS47L91:
589 				patch_fn = cs47l90_patch;
590 				mfd_devs = cs47l90_devs;
591 				n_devs = ARRAY_SIZE(cs47l90_devs);
592 				break;
593 			default:
594 				break;
595 			}
596 		}
597 		break;
598 	case CS47L92_SILICON_ID:
599 		if (IS_ENABLED(CONFIG_MFD_CS47L92)) {
600 			switch (madera->type) {
601 			case CS42L92:
602 			case CS47L92:
603 			case CS47L93:
604 				patch_fn = cs47l92_patch;
605 				mfd_devs = cs47l92_devs;
606 				n_devs = ARRAY_SIZE(cs47l92_devs);
607 				break;
608 			default:
609 				break;
610 			}
611 		}
612 		break;
613 	default:
614 		dev_err(madera->dev, "Unknown device ID: %x\n", hwid);
615 		ret = -EINVAL;
616 		goto err_reset;
617 	}
618 
619 	if (!n_devs) {
620 		dev_err(madera->dev, "Device ID 0x%x not a %s\n", hwid,
621 			madera->type_name);
622 		ret = -ENODEV;
623 		goto err_reset;
624 	}
625 
626 	/*
627 	 * It looks like a device we support. If we don't have a hard reset
628 	 * we can now attempt a soft reset.
629 	 */
630 	if (!madera->pdata.reset) {
631 		ret = madera_soft_reset(madera);
632 		if (ret)
633 			goto err_reset;
634 	}
635 
636 	ret = madera_wait_for_boot(madera);
637 	if (ret) {
638 		dev_err(madera->dev, "Device failed initial boot: %d\n", ret);
639 		goto err_reset;
640 	}
641 
642 	ret = regmap_read(madera->regmap, MADERA_HARDWARE_REVISION,
643 			  &madera->rev);
644 	if (ret) {
645 		dev_err(dev, "Failed to read revision register: %d\n", ret);
646 		goto err_reset;
647 	}
648 	madera->rev &= MADERA_HW_REVISION_MASK;
649 
650 	dev_info(dev, "%s silicon revision %d\n", madera->type_name,
651 		 madera->rev);
652 
653 	/* Apply hardware patch */
654 	if (patch_fn) {
655 		ret = patch_fn(madera);
656 		if (ret) {
657 			dev_err(madera->dev, "Failed to apply patch %d\n", ret);
658 			goto err_reset;
659 		}
660 	}
661 
662 	/* Init 32k clock sourced from MCLK2 */
663 	ret = regmap_update_bits(madera->regmap,
664 			MADERA_CLOCK_32K_1,
665 			MADERA_CLK_32K_ENA_MASK | MADERA_CLK_32K_SRC_MASK,
666 			MADERA_CLK_32K_ENA | MADERA_32KZ_MCLK2);
667 	if (ret) {
668 		dev_err(madera->dev, "Failed to init 32k clock: %d\n", ret);
669 		goto err_reset;
670 	}
671 
672 	pm_runtime_set_active(madera->dev);
673 	pm_runtime_enable(madera->dev);
674 	pm_runtime_set_autosuspend_delay(madera->dev, 100);
675 	pm_runtime_use_autosuspend(madera->dev);
676 
677 	/* No devm_ because we need to control shutdown order of children */
678 	ret = mfd_add_devices(madera->dev, PLATFORM_DEVID_NONE,
679 			      mfd_devs, n_devs,
680 			      NULL, 0, NULL);
681 	if (ret) {
682 		dev_err(madera->dev, "Failed to add subdevices: %d\n", ret);
683 		goto err_pm_runtime;
684 	}
685 
686 	return 0;
687 
688 err_pm_runtime:
689 	pm_runtime_disable(madera->dev);
690 err_reset:
691 	madera_enable_hard_reset(madera);
692 	regulator_disable(madera->dcvdd);
693 err_enable:
694 	regulator_bulk_disable(madera->num_core_supplies,
695 			       madera->core_supplies);
696 err_dcvdd:
697 	regulator_put(madera->dcvdd);
698 err_devs:
699 	mfd_remove_devices(dev);
700 
701 	return ret;
702 }
703 EXPORT_SYMBOL_GPL(madera_dev_init);
704 
705 int madera_dev_exit(struct madera *madera)
706 {
707 	/* Prevent any IRQs being serviced while we clean up */
708 	disable_irq(madera->irq);
709 
710 	/*
711 	 * DCVDD could be supplied by a child node, we must disable it before
712 	 * removing the children, and prevent PM runtime from turning it back on
713 	 */
714 	pm_runtime_disable(madera->dev);
715 
716 	regulator_disable(madera->dcvdd);
717 	regulator_put(madera->dcvdd);
718 
719 	mfd_remove_devices(madera->dev);
720 	madera_enable_hard_reset(madera);
721 
722 	regulator_bulk_disable(madera->num_core_supplies,
723 			       madera->core_supplies);
724 	return 0;
725 }
726 EXPORT_SYMBOL_GPL(madera_dev_exit);
727 
728 MODULE_DESCRIPTION("Madera core MFD driver");
729 MODULE_AUTHOR("Richard Fitzgerald <rf@opensource.cirrus.com>");
730 MODULE_LICENSE("GPL v2");
731