1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * SGI IOC3 multifunction device driver 4 * 5 * Copyright (C) 2018, 2019 Thomas Bogendoerfer <tbogendoerfer@suse.de> 6 * 7 * Based on work by: 8 * Stanislaw Skowronek <skylark@unaligned.org> 9 * Joshua Kinard <kumba@gentoo.org> 10 * Brent Casavant <bcasavan@sgi.com> - IOC4 master driver 11 * Pat Gefre <pfg@sgi.com> - IOC3 serial port IRQ demuxer 12 */ 13 14 #include <linux/delay.h> 15 #include <linux/errno.h> 16 #include <linux/interrupt.h> 17 #include <linux/mfd/core.h> 18 #include <linux/module.h> 19 #include <linux/pci.h> 20 #include <linux/platform_device.h> 21 #include <linux/platform_data/sgi-w1.h> 22 #include <linux/rtc/ds1685.h> 23 24 #include <asm/pci/bridge.h> 25 #include <asm/sn/ioc3.h> 26 27 #define IOC3_IRQ_SERIAL_A 6 28 #define IOC3_IRQ_SERIAL_B 15 29 #define IOC3_IRQ_KBD 22 30 31 /* Bitmask for selecting which IRQs are level triggered */ 32 #define IOC3_LVL_MASK (BIT(IOC3_IRQ_SERIAL_A) | BIT(IOC3_IRQ_SERIAL_B)) 33 34 #define M48T35_REG_SIZE 32768 /* size of m48t35 registers */ 35 36 /* 1.2 us latency timer (40 cycles at 33 MHz) */ 37 #define IOC3_LATENCY 40 38 39 struct ioc3_priv_data { 40 struct irq_domain *domain; 41 struct ioc3 __iomem *regs; 42 struct pci_dev *pdev; 43 int domain_irq; 44 }; 45 46 static void ioc3_irq_ack(struct irq_data *d) 47 { 48 struct ioc3_priv_data *ipd = irq_data_get_irq_chip_data(d); 49 unsigned int hwirq = irqd_to_hwirq(d); 50 51 writel(BIT(hwirq), &ipd->regs->sio_ir); 52 } 53 54 static void ioc3_irq_mask(struct irq_data *d) 55 { 56 struct ioc3_priv_data *ipd = irq_data_get_irq_chip_data(d); 57 unsigned int hwirq = irqd_to_hwirq(d); 58 59 writel(BIT(hwirq), &ipd->regs->sio_iec); 60 } 61 62 static void ioc3_irq_unmask(struct irq_data *d) 63 { 64 struct ioc3_priv_data *ipd = irq_data_get_irq_chip_data(d); 65 unsigned int hwirq = irqd_to_hwirq(d); 66 67 writel(BIT(hwirq), &ipd->regs->sio_ies); 68 } 69 70 static struct irq_chip ioc3_irq_chip = { 71 .name = "IOC3", 72 .irq_ack = ioc3_irq_ack, 73 .irq_mask = ioc3_irq_mask, 74 .irq_unmask = ioc3_irq_unmask, 75 }; 76 77 static int ioc3_irq_domain_map(struct irq_domain *d, unsigned int irq, 78 irq_hw_number_t hwirq) 79 { 80 /* Set level IRQs for every interrupt contained in IOC3_LVL_MASK */ 81 if (BIT(hwirq) & IOC3_LVL_MASK) 82 irq_set_chip_and_handler(irq, &ioc3_irq_chip, handle_level_irq); 83 else 84 irq_set_chip_and_handler(irq, &ioc3_irq_chip, handle_edge_irq); 85 86 irq_set_chip_data(irq, d->host_data); 87 return 0; 88 } 89 90 static void ioc3_irq_domain_unmap(struct irq_domain *d, unsigned int irq) 91 { 92 irq_set_chip_and_handler(irq, NULL, NULL); 93 irq_set_chip_data(irq, NULL); 94 } 95 96 static const struct irq_domain_ops ioc3_irq_domain_ops = { 97 .map = ioc3_irq_domain_map, 98 .unmap = ioc3_irq_domain_unmap, 99 }; 100 101 static void ioc3_irq_handler(struct irq_desc *desc) 102 { 103 struct irq_domain *domain = irq_desc_get_handler_data(desc); 104 struct ioc3_priv_data *ipd = domain->host_data; 105 struct ioc3 __iomem *regs = ipd->regs; 106 u32 pending, mask; 107 unsigned int irq; 108 109 pending = readl(®s->sio_ir); 110 mask = readl(®s->sio_ies); 111 pending &= mask; /* Mask off not enabled interrupts */ 112 113 if (pending) { 114 irq = irq_find_mapping(domain, __ffs(pending)); 115 if (irq) 116 generic_handle_irq(irq); 117 } else { 118 spurious_interrupt(); 119 } 120 } 121 122 /* 123 * System boards/BaseIOs use more interrupt pins of the bridge ASIC 124 * to which the IOC3 is connected. Since the IOC3 MFD driver 125 * knows wiring of these extra pins, we use the map_irq function 126 * to get interrupts activated 127 */ 128 static int ioc3_map_irq(struct pci_dev *pdev, int slot, int pin) 129 { 130 struct pci_host_bridge *hbrg = pci_find_host_bridge(pdev->bus); 131 132 return hbrg->map_irq(pdev, slot, pin); 133 } 134 135 static int ioc3_irq_domain_setup(struct ioc3_priv_data *ipd, int irq) 136 { 137 struct irq_domain *domain; 138 struct fwnode_handle *fn; 139 140 fn = irq_domain_alloc_named_fwnode("IOC3"); 141 if (!fn) 142 goto err; 143 144 domain = irq_domain_create_linear(fn, 24, &ioc3_irq_domain_ops, ipd); 145 if (!domain) { 146 irq_domain_free_fwnode(fn); 147 goto err; 148 } 149 150 ipd->domain = domain; 151 152 irq_set_chained_handler_and_data(irq, ioc3_irq_handler, domain); 153 ipd->domain_irq = irq; 154 return 0; 155 156 err: 157 dev_err(&ipd->pdev->dev, "irq domain setup failed\n"); 158 return -ENOMEM; 159 } 160 161 static struct resource ioc3_uarta_resources[] = { 162 DEFINE_RES_MEM(offsetof(struct ioc3, sregs.uarta), 163 sizeof_field(struct ioc3, sregs.uarta)), 164 DEFINE_RES_IRQ(IOC3_IRQ_SERIAL_A) 165 }; 166 167 static struct resource ioc3_uartb_resources[] = { 168 DEFINE_RES_MEM(offsetof(struct ioc3, sregs.uartb), 169 sizeof_field(struct ioc3, sregs.uartb)), 170 DEFINE_RES_IRQ(IOC3_IRQ_SERIAL_B) 171 }; 172 173 static struct mfd_cell ioc3_serial_cells[] = { 174 { 175 .name = "ioc3-serial8250", 176 .resources = ioc3_uarta_resources, 177 .num_resources = ARRAY_SIZE(ioc3_uarta_resources), 178 }, 179 { 180 .name = "ioc3-serial8250", 181 .resources = ioc3_uartb_resources, 182 .num_resources = ARRAY_SIZE(ioc3_uartb_resources), 183 } 184 }; 185 186 static int ioc3_serial_setup(struct ioc3_priv_data *ipd) 187 { 188 int ret; 189 190 /* Set gpio pins for RS232/RS422 mode selection */ 191 writel(GPCR_UARTA_MODESEL | GPCR_UARTB_MODESEL, 192 &ipd->regs->gpcr_s); 193 /* Select RS232 mode for uart a */ 194 writel(0, &ipd->regs->gppr[6]); 195 /* Select RS232 mode for uart b */ 196 writel(0, &ipd->regs->gppr[7]); 197 198 /* Switch both ports to 16650 mode */ 199 writel(readl(&ipd->regs->port_a.sscr) & ~SSCR_DMA_EN, 200 &ipd->regs->port_a.sscr); 201 writel(readl(&ipd->regs->port_b.sscr) & ~SSCR_DMA_EN, 202 &ipd->regs->port_b.sscr); 203 udelay(1000); /* Wait until mode switch is done */ 204 205 ret = mfd_add_devices(&ipd->pdev->dev, PLATFORM_DEVID_AUTO, 206 ioc3_serial_cells, ARRAY_SIZE(ioc3_serial_cells), 207 &ipd->pdev->resource[0], 0, ipd->domain); 208 if (ret) { 209 dev_err(&ipd->pdev->dev, "Failed to add 16550 subdevs\n"); 210 return ret; 211 } 212 213 return 0; 214 } 215 216 static struct resource ioc3_kbd_resources[] = { 217 DEFINE_RES_MEM(offsetof(struct ioc3, serio), 218 sizeof_field(struct ioc3, serio)), 219 DEFINE_RES_IRQ(IOC3_IRQ_KBD) 220 }; 221 222 static struct mfd_cell ioc3_kbd_cells[] = { 223 { 224 .name = "ioc3-kbd", 225 .resources = ioc3_kbd_resources, 226 .num_resources = ARRAY_SIZE(ioc3_kbd_resources), 227 } 228 }; 229 230 static int ioc3_kbd_setup(struct ioc3_priv_data *ipd) 231 { 232 int ret; 233 234 ret = mfd_add_devices(&ipd->pdev->dev, PLATFORM_DEVID_AUTO, 235 ioc3_kbd_cells, ARRAY_SIZE(ioc3_kbd_cells), 236 &ipd->pdev->resource[0], 0, ipd->domain); 237 if (ret) { 238 dev_err(&ipd->pdev->dev, "Failed to add 16550 subdevs\n"); 239 return ret; 240 } 241 242 return 0; 243 } 244 245 static struct resource ioc3_eth_resources[] = { 246 DEFINE_RES_MEM(offsetof(struct ioc3, eth), 247 sizeof_field(struct ioc3, eth)), 248 DEFINE_RES_MEM(offsetof(struct ioc3, ssram), 249 sizeof_field(struct ioc3, ssram)), 250 DEFINE_RES_IRQ(0) 251 }; 252 253 static struct resource ioc3_w1_resources[] = { 254 DEFINE_RES_MEM(offsetof(struct ioc3, mcr), 255 sizeof_field(struct ioc3, mcr)), 256 }; 257 static struct sgi_w1_platform_data ioc3_w1_platform_data; 258 259 static struct mfd_cell ioc3_eth_cells[] = { 260 { 261 .name = "ioc3-eth", 262 .resources = ioc3_eth_resources, 263 .num_resources = ARRAY_SIZE(ioc3_eth_resources), 264 }, 265 { 266 .name = "sgi_w1", 267 .resources = ioc3_w1_resources, 268 .num_resources = ARRAY_SIZE(ioc3_w1_resources), 269 .platform_data = &ioc3_w1_platform_data, 270 .pdata_size = sizeof(ioc3_w1_platform_data), 271 } 272 }; 273 274 static int ioc3_eth_setup(struct ioc3_priv_data *ipd) 275 { 276 int ret; 277 278 /* Enable One-Wire bus */ 279 writel(GPCR_MLAN_EN, &ipd->regs->gpcr_s); 280 281 /* Generate unique identifier */ 282 snprintf(ioc3_w1_platform_data.dev_id, 283 sizeof(ioc3_w1_platform_data.dev_id), "ioc3-%012llx", 284 ipd->pdev->resource->start); 285 286 ret = mfd_add_devices(&ipd->pdev->dev, PLATFORM_DEVID_AUTO, 287 ioc3_eth_cells, ARRAY_SIZE(ioc3_eth_cells), 288 &ipd->pdev->resource[0], ipd->pdev->irq, NULL); 289 if (ret) { 290 dev_err(&ipd->pdev->dev, "Failed to add ETH/W1 subdev\n"); 291 return ret; 292 } 293 294 return 0; 295 } 296 297 static struct resource ioc3_m48t35_resources[] = { 298 DEFINE_RES_MEM(IOC3_BYTEBUS_DEV0, M48T35_REG_SIZE) 299 }; 300 301 static struct mfd_cell ioc3_m48t35_cells[] = { 302 { 303 .name = "rtc-m48t35", 304 .resources = ioc3_m48t35_resources, 305 .num_resources = ARRAY_SIZE(ioc3_m48t35_resources), 306 } 307 }; 308 309 static int ioc3_m48t35_setup(struct ioc3_priv_data *ipd) 310 { 311 int ret; 312 313 ret = mfd_add_devices(&ipd->pdev->dev, PLATFORM_DEVID_AUTO, 314 ioc3_m48t35_cells, ARRAY_SIZE(ioc3_m48t35_cells), 315 &ipd->pdev->resource[0], 0, ipd->domain); 316 if (ret) 317 dev_err(&ipd->pdev->dev, "Failed to add M48T35 subdev\n"); 318 319 return ret; 320 } 321 322 static struct ds1685_rtc_platform_data ip30_rtc_platform_data = { 323 .bcd_mode = false, 324 .no_irq = false, 325 .uie_unsupported = true, 326 .access_type = ds1685_reg_indirect, 327 }; 328 329 static struct resource ioc3_rtc_ds1685_resources[] = { 330 DEFINE_RES_MEM(IOC3_BYTEBUS_DEV1, 1), 331 DEFINE_RES_MEM(IOC3_BYTEBUS_DEV2, 1), 332 DEFINE_RES_IRQ(0) 333 }; 334 335 static struct mfd_cell ioc3_ds1685_cells[] = { 336 { 337 .name = "rtc-ds1685", 338 .resources = ioc3_rtc_ds1685_resources, 339 .num_resources = ARRAY_SIZE(ioc3_rtc_ds1685_resources), 340 .platform_data = &ip30_rtc_platform_data, 341 .pdata_size = sizeof(ip30_rtc_platform_data), 342 .id = PLATFORM_DEVID_NONE, 343 } 344 }; 345 346 static int ioc3_ds1685_setup(struct ioc3_priv_data *ipd) 347 { 348 int ret, irq; 349 350 irq = ioc3_map_irq(ipd->pdev, 6, 0); 351 352 ret = mfd_add_devices(&ipd->pdev->dev, 0, ioc3_ds1685_cells, 353 ARRAY_SIZE(ioc3_ds1685_cells), 354 &ipd->pdev->resource[0], irq, NULL); 355 if (ret) 356 dev_err(&ipd->pdev->dev, "Failed to add DS1685 subdev\n"); 357 358 return ret; 359 }; 360 361 362 static struct resource ioc3_leds_resources[] = { 363 DEFINE_RES_MEM(offsetof(struct ioc3, gppr[0]), 364 sizeof_field(struct ioc3, gppr[0])), 365 DEFINE_RES_MEM(offsetof(struct ioc3, gppr[1]), 366 sizeof_field(struct ioc3, gppr[1])), 367 }; 368 369 static struct mfd_cell ioc3_led_cells[] = { 370 { 371 .name = "ip30-leds", 372 .resources = ioc3_leds_resources, 373 .num_resources = ARRAY_SIZE(ioc3_leds_resources), 374 .id = PLATFORM_DEVID_NONE, 375 } 376 }; 377 378 static int ioc3_led_setup(struct ioc3_priv_data *ipd) 379 { 380 int ret; 381 382 ret = mfd_add_devices(&ipd->pdev->dev, 0, ioc3_led_cells, 383 ARRAY_SIZE(ioc3_led_cells), 384 &ipd->pdev->resource[0], 0, ipd->domain); 385 if (ret) 386 dev_err(&ipd->pdev->dev, "Failed to add LED subdev\n"); 387 388 return ret; 389 } 390 391 static int ip27_baseio_setup(struct ioc3_priv_data *ipd) 392 { 393 int ret, io_irq; 394 395 io_irq = ioc3_map_irq(ipd->pdev, PCI_SLOT(ipd->pdev->devfn), 396 PCI_INTERRUPT_INTB); 397 ret = ioc3_irq_domain_setup(ipd, io_irq); 398 if (ret) 399 return ret; 400 401 ret = ioc3_eth_setup(ipd); 402 if (ret) 403 return ret; 404 405 ret = ioc3_serial_setup(ipd); 406 if (ret) 407 return ret; 408 409 return ioc3_m48t35_setup(ipd); 410 } 411 412 static int ip27_baseio6g_setup(struct ioc3_priv_data *ipd) 413 { 414 int ret, io_irq; 415 416 io_irq = ioc3_map_irq(ipd->pdev, PCI_SLOT(ipd->pdev->devfn), 417 PCI_INTERRUPT_INTB); 418 ret = ioc3_irq_domain_setup(ipd, io_irq); 419 if (ret) 420 return ret; 421 422 ret = ioc3_eth_setup(ipd); 423 if (ret) 424 return ret; 425 426 ret = ioc3_serial_setup(ipd); 427 if (ret) 428 return ret; 429 430 ret = ioc3_m48t35_setup(ipd); 431 if (ret) 432 return ret; 433 434 return ioc3_kbd_setup(ipd); 435 } 436 437 static int ip27_mio_setup(struct ioc3_priv_data *ipd) 438 { 439 int ret; 440 441 ret = ioc3_irq_domain_setup(ipd, ipd->pdev->irq); 442 if (ret) 443 return ret; 444 445 ret = ioc3_serial_setup(ipd); 446 if (ret) 447 return ret; 448 449 return ioc3_kbd_setup(ipd); 450 } 451 452 static int ip30_sysboard_setup(struct ioc3_priv_data *ipd) 453 { 454 int ret, io_irq; 455 456 io_irq = ioc3_map_irq(ipd->pdev, PCI_SLOT(ipd->pdev->devfn), 457 PCI_INTERRUPT_INTB); 458 ret = ioc3_irq_domain_setup(ipd, io_irq); 459 if (ret) 460 return ret; 461 462 ret = ioc3_eth_setup(ipd); 463 if (ret) 464 return ret; 465 466 ret = ioc3_serial_setup(ipd); 467 if (ret) 468 return ret; 469 470 ret = ioc3_kbd_setup(ipd); 471 if (ret) 472 return ret; 473 474 ret = ioc3_ds1685_setup(ipd); 475 if (ret) 476 return ret; 477 478 return ioc3_led_setup(ipd); 479 } 480 481 static int ioc3_menet_setup(struct ioc3_priv_data *ipd) 482 { 483 int ret, io_irq; 484 485 io_irq = ioc3_map_irq(ipd->pdev, PCI_SLOT(ipd->pdev->devfn), 486 PCI_INTERRUPT_INTB); 487 ret = ioc3_irq_domain_setup(ipd, io_irq); 488 if (ret) 489 return ret; 490 491 ret = ioc3_eth_setup(ipd); 492 if (ret) 493 return ret; 494 495 return ioc3_serial_setup(ipd); 496 } 497 498 static int ioc3_menet4_setup(struct ioc3_priv_data *ipd) 499 { 500 return ioc3_eth_setup(ipd); 501 } 502 503 static int ioc3_cad_duo_setup(struct ioc3_priv_data *ipd) 504 { 505 int ret, io_irq; 506 507 io_irq = ioc3_map_irq(ipd->pdev, PCI_SLOT(ipd->pdev->devfn), 508 PCI_INTERRUPT_INTB); 509 ret = ioc3_irq_domain_setup(ipd, io_irq); 510 if (ret) 511 return ret; 512 513 ret = ioc3_eth_setup(ipd); 514 if (ret) 515 return ret; 516 517 return ioc3_kbd_setup(ipd); 518 } 519 520 /* Helper macro for filling ioc3_info array */ 521 #define IOC3_SID(_name, _sid, _setup) \ 522 { \ 523 .name = _name, \ 524 .sid = PCI_VENDOR_ID_SGI | (IOC3_SUBSYS_ ## _sid << 16), \ 525 .setup = _setup, \ 526 } 527 528 static struct { 529 const char *name; 530 u32 sid; 531 int (*setup)(struct ioc3_priv_data *ipd); 532 } ioc3_infos[] = { 533 IOC3_SID("IP27 BaseIO6G", IP27_BASEIO6G, &ip27_baseio6g_setup), 534 IOC3_SID("IP27 MIO", IP27_MIO, &ip27_mio_setup), 535 IOC3_SID("IP27 BaseIO", IP27_BASEIO, &ip27_baseio_setup), 536 IOC3_SID("IP29 System Board", IP29_SYSBOARD, &ip27_baseio6g_setup), 537 IOC3_SID("IP30 System Board", IP30_SYSBOARD, &ip30_sysboard_setup), 538 IOC3_SID("MENET", MENET, &ioc3_menet_setup), 539 IOC3_SID("MENET4", MENET4, &ioc3_menet4_setup) 540 }; 541 #undef IOC3_SID 542 543 static int ioc3_setup(struct ioc3_priv_data *ipd) 544 { 545 u32 sid; 546 int i; 547 548 /* Clear IRQs */ 549 writel(~0, &ipd->regs->sio_iec); 550 writel(~0, &ipd->regs->sio_ir); 551 writel(0, &ipd->regs->eth.eier); 552 writel(~0, &ipd->regs->eth.eisr); 553 554 /* Read subsystem vendor id and subsystem id */ 555 pci_read_config_dword(ipd->pdev, PCI_SUBSYSTEM_VENDOR_ID, &sid); 556 557 for (i = 0; i < ARRAY_SIZE(ioc3_infos); i++) 558 if (sid == ioc3_infos[i].sid) { 559 pr_info("ioc3: %s\n", ioc3_infos[i].name); 560 return ioc3_infos[i].setup(ipd); 561 } 562 563 /* Treat everything not identified by PCI subid as CAD DUO */ 564 pr_info("ioc3: CAD DUO\n"); 565 return ioc3_cad_duo_setup(ipd); 566 } 567 568 static int ioc3_mfd_probe(struct pci_dev *pdev, 569 const struct pci_device_id *pci_id) 570 { 571 struct ioc3_priv_data *ipd; 572 struct ioc3 __iomem *regs; 573 int ret; 574 575 ret = pci_enable_device(pdev); 576 if (ret) 577 return ret; 578 579 pci_write_config_byte(pdev, PCI_LATENCY_TIMER, IOC3_LATENCY); 580 pci_set_master(pdev); 581 582 ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); 583 if (ret) { 584 pr_err("%s: No usable DMA configuration, aborting.\n", 585 pci_name(pdev)); 586 goto out_disable_device; 587 } 588 589 /* Set up per-IOC3 data */ 590 ipd = devm_kzalloc(&pdev->dev, sizeof(struct ioc3_priv_data), 591 GFP_KERNEL); 592 if (!ipd) { 593 ret = -ENOMEM; 594 goto out_disable_device; 595 } 596 ipd->pdev = pdev; 597 598 /* 599 * Map all IOC3 registers. These are shared between subdevices 600 * so the main IOC3 module manages them. 601 */ 602 regs = pci_ioremap_bar(pdev, 0); 603 if (!regs) { 604 dev_warn(&pdev->dev, "ioc3: Unable to remap PCI BAR for %s.\n", 605 pci_name(pdev)); 606 ret = -ENOMEM; 607 goto out_disable_device; 608 } 609 ipd->regs = regs; 610 611 /* Track PCI-device specific data */ 612 pci_set_drvdata(pdev, ipd); 613 614 ret = ioc3_setup(ipd); 615 if (ret) { 616 /* Remove all already added MFD devices */ 617 mfd_remove_devices(&ipd->pdev->dev); 618 if (ipd->domain) { 619 struct fwnode_handle *fn = ipd->domain->fwnode; 620 621 irq_domain_remove(ipd->domain); 622 irq_domain_free_fwnode(fn); 623 free_irq(ipd->domain_irq, (void *)ipd); 624 } 625 pci_iounmap(pdev, regs); 626 goto out_disable_device; 627 } 628 629 return 0; 630 631 out_disable_device: 632 pci_disable_device(pdev); 633 return ret; 634 } 635 636 static void ioc3_mfd_remove(struct pci_dev *pdev) 637 { 638 struct ioc3_priv_data *ipd; 639 640 ipd = pci_get_drvdata(pdev); 641 642 /* Clear and disable all IRQs */ 643 writel(~0, &ipd->regs->sio_iec); 644 writel(~0, &ipd->regs->sio_ir); 645 646 /* Release resources */ 647 mfd_remove_devices(&ipd->pdev->dev); 648 if (ipd->domain) { 649 struct fwnode_handle *fn = ipd->domain->fwnode; 650 651 irq_domain_remove(ipd->domain); 652 irq_domain_free_fwnode(fn); 653 free_irq(ipd->domain_irq, (void *)ipd); 654 } 655 pci_iounmap(pdev, ipd->regs); 656 pci_disable_device(pdev); 657 } 658 659 static struct pci_device_id ioc3_mfd_id_table[] = { 660 { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, PCI_ANY_ID, PCI_ANY_ID }, 661 { 0, }, 662 }; 663 MODULE_DEVICE_TABLE(pci, ioc3_mfd_id_table); 664 665 static struct pci_driver ioc3_mfd_driver = { 666 .name = "IOC3", 667 .id_table = ioc3_mfd_id_table, 668 .probe = ioc3_mfd_probe, 669 .remove = ioc3_mfd_remove, 670 }; 671 672 module_pci_driver(ioc3_mfd_driver); 673 674 MODULE_AUTHOR("Thomas Bogendoerfer <tbogendoerfer@suse.de>"); 675 MODULE_DESCRIPTION("SGI IOC3 MFD driver"); 676 MODULE_LICENSE("GPL v2"); 677