1 /* 2 * Copyright (C) 2014-2015 Pengutronix, Markus Pargmann <mpa@pengutronix.de> 3 * 4 * This program is free software; you can redistribute it and/or modify it under 5 * the terms of the GNU General Public License version 2 as published by the 6 * Free Software Foundation. 7 */ 8 9 #include <linux/clk.h> 10 #include <linux/interrupt.h> 11 #include <linux/irqchip/chained_irq.h> 12 #include <linux/irqdesc.h> 13 #include <linux/irqdomain.h> 14 #include <linux/irq.h> 15 #include <linux/mfd/imx25-tsadc.h> 16 #include <linux/module.h> 17 #include <linux/of.h> 18 #include <linux/of_platform.h> 19 #include <linux/platform_device.h> 20 #include <linux/regmap.h> 21 22 static struct regmap_config mx25_tsadc_regmap_config = { 23 .fast_io = true, 24 .max_register = 8, 25 .reg_bits = 32, 26 .val_bits = 32, 27 .reg_stride = 4, 28 }; 29 30 static void mx25_tsadc_irq_handler(struct irq_desc *desc) 31 { 32 struct mx25_tsadc *tsadc = irq_desc_get_handler_data(desc); 33 struct irq_chip *chip = irq_desc_get_chip(desc); 34 u32 status; 35 36 chained_irq_enter(chip, desc); 37 38 regmap_read(tsadc->regs, MX25_TSC_TGSR, &status); 39 40 if (status & MX25_TGSR_GCQ_INT) 41 generic_handle_irq(irq_find_mapping(tsadc->domain, 1)); 42 43 if (status & MX25_TGSR_TCQ_INT) 44 generic_handle_irq(irq_find_mapping(tsadc->domain, 0)); 45 46 chained_irq_exit(chip, desc); 47 } 48 49 static int mx25_tsadc_domain_map(struct irq_domain *d, unsigned int irq, 50 irq_hw_number_t hwirq) 51 { 52 struct mx25_tsadc *tsadc = d->host_data; 53 54 irq_set_chip_data(irq, tsadc); 55 irq_set_chip_and_handler(irq, &dummy_irq_chip, 56 handle_level_irq); 57 irq_modify_status(irq, IRQ_NOREQUEST, IRQ_NOPROBE); 58 59 return 0; 60 } 61 62 static struct irq_domain_ops mx25_tsadc_domain_ops = { 63 .map = mx25_tsadc_domain_map, 64 .xlate = irq_domain_xlate_onecell, 65 }; 66 67 static int mx25_tsadc_setup_irq(struct platform_device *pdev, 68 struct mx25_tsadc *tsadc) 69 { 70 struct device *dev = &pdev->dev; 71 struct device_node *np = dev->of_node; 72 int irq; 73 74 irq = platform_get_irq(pdev, 0); 75 if (irq <= 0) { 76 dev_err(dev, "Failed to get irq\n"); 77 return irq; 78 } 79 80 tsadc->domain = irq_domain_add_simple(np, 2, 0, &mx25_tsadc_domain_ops, 81 tsadc); 82 if (!tsadc->domain) { 83 dev_err(dev, "Failed to add irq domain\n"); 84 return -ENOMEM; 85 } 86 87 irq_set_chained_handler(irq, mx25_tsadc_irq_handler); 88 irq_set_handler_data(irq, tsadc); 89 90 return 0; 91 } 92 93 static void mx25_tsadc_setup_clk(struct platform_device *pdev, 94 struct mx25_tsadc *tsadc) 95 { 96 unsigned clk_div; 97 98 /* 99 * According to the datasheet the ADC clock should never 100 * exceed 1,75 MHz. Base clock is the IPG and the ADC unit uses 101 * a funny clock divider. To keep the ADC conversion time constant 102 * adapt the ADC internal clock divider to the IPG clock rate. 103 */ 104 105 dev_dbg(&pdev->dev, "Found master clock at %lu Hz\n", 106 clk_get_rate(tsadc->clk)); 107 108 clk_div = DIV_ROUND_UP(clk_get_rate(tsadc->clk), 1750000); 109 dev_dbg(&pdev->dev, "Setting up ADC clock divider to %u\n", clk_div); 110 111 /* adc clock = IPG clock / (2 * div + 2) */ 112 clk_div -= 2; 113 clk_div /= 2; 114 115 /* 116 * the ADC clock divider changes its behaviour when values below 4 117 * are used: it is fixed to "/ 10" in this case 118 */ 119 clk_div = max_t(unsigned, 4, clk_div); 120 121 dev_dbg(&pdev->dev, "Resulting ADC conversion clock at %lu Hz\n", 122 clk_get_rate(tsadc->clk) / (2 * clk_div + 2)); 123 124 regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, 125 MX25_TGCR_ADCCLKCFG(0x1f), 126 MX25_TGCR_ADCCLKCFG(clk_div)); 127 } 128 129 static int mx25_tsadc_probe(struct platform_device *pdev) 130 { 131 struct device *dev = &pdev->dev; 132 struct device_node *np = dev->of_node; 133 struct mx25_tsadc *tsadc; 134 struct resource *res; 135 int ret; 136 void __iomem *iomem; 137 138 tsadc = devm_kzalloc(dev, sizeof(*tsadc), GFP_KERNEL); 139 if (!tsadc) 140 return -ENOMEM; 141 142 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 143 iomem = devm_ioremap_resource(dev, res); 144 if (IS_ERR(iomem)) 145 return PTR_ERR(iomem); 146 147 tsadc->regs = devm_regmap_init_mmio(dev, iomem, 148 &mx25_tsadc_regmap_config); 149 if (IS_ERR(tsadc->regs)) { 150 dev_err(dev, "Failed to initialize regmap\n"); 151 return PTR_ERR(tsadc->regs); 152 } 153 154 tsadc->clk = devm_clk_get(dev, "ipg"); 155 if (IS_ERR(tsadc->clk)) { 156 dev_err(dev, "Failed to get ipg clock\n"); 157 return PTR_ERR(tsadc->clk); 158 } 159 160 /* setup clock according to the datasheet */ 161 mx25_tsadc_setup_clk(pdev, tsadc); 162 163 /* Enable clock and reset the component */ 164 regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_CLK_EN, 165 MX25_TGCR_CLK_EN); 166 regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_TSC_RST, 167 MX25_TGCR_TSC_RST); 168 169 /* Setup powersaving mode, but enable internal reference voltage */ 170 regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_POWERMODE_MASK, 171 MX25_TGCR_POWERMODE_SAVE); 172 regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_INTREFEN, 173 MX25_TGCR_INTREFEN); 174 175 ret = mx25_tsadc_setup_irq(pdev, tsadc); 176 if (ret) 177 return ret; 178 179 platform_set_drvdata(pdev, tsadc); 180 181 of_platform_populate(np, NULL, NULL, dev); 182 183 return 0; 184 } 185 186 static const struct of_device_id mx25_tsadc_ids[] = { 187 { .compatible = "fsl,imx25-tsadc" }, 188 { /* Sentinel */ } 189 }; 190 191 static struct platform_driver mx25_tsadc_driver = { 192 .driver = { 193 .name = "mx25-tsadc", 194 .of_match_table = of_match_ptr(mx25_tsadc_ids), 195 }, 196 .probe = mx25_tsadc_probe, 197 }; 198 module_platform_driver(mx25_tsadc_driver); 199 200 MODULE_DESCRIPTION("MFD for ADC/TSC for Freescale mx25"); 201 MODULE_AUTHOR("Markus Pargmann <mpa@pengutronix.de>"); 202 MODULE_LICENSE("GPL v2"); 203 MODULE_ALIAS("platform:mx25-tsadc"); 204