xref: /openbmc/linux/drivers/mfd/fsl-imx25-tsadc.c (revision 3213486f)
1 /*
2  * Copyright (C) 2014-2015 Pengutronix, Markus Pargmann <mpa@pengutronix.de>
3  *
4  * This program is free software; you can redistribute it and/or modify it under
5  * the terms of the GNU General Public License version 2 as published by the
6  * Free Software Foundation.
7  */
8 
9 #include <linux/clk.h>
10 #include <linux/interrupt.h>
11 #include <linux/irqchip/chained_irq.h>
12 #include <linux/irqdesc.h>
13 #include <linux/irqdomain.h>
14 #include <linux/irq.h>
15 #include <linux/mfd/imx25-tsadc.h>
16 #include <linux/module.h>
17 #include <linux/of.h>
18 #include <linux/of_platform.h>
19 #include <linux/platform_device.h>
20 #include <linux/regmap.h>
21 
22 static struct regmap_config mx25_tsadc_regmap_config = {
23 	.fast_io = true,
24 	.max_register = 8,
25 	.reg_bits = 32,
26 	.val_bits = 32,
27 	.reg_stride = 4,
28 };
29 
30 static void mx25_tsadc_irq_handler(struct irq_desc *desc)
31 {
32 	struct mx25_tsadc *tsadc = irq_desc_get_handler_data(desc);
33 	struct irq_chip *chip = irq_desc_get_chip(desc);
34 	u32 status;
35 
36 	chained_irq_enter(chip, desc);
37 
38 	regmap_read(tsadc->regs, MX25_TSC_TGSR, &status);
39 
40 	if (status & MX25_TGSR_GCQ_INT)
41 		generic_handle_irq(irq_find_mapping(tsadc->domain, 1));
42 
43 	if (status & MX25_TGSR_TCQ_INT)
44 		generic_handle_irq(irq_find_mapping(tsadc->domain, 0));
45 
46 	chained_irq_exit(chip, desc);
47 }
48 
49 static int mx25_tsadc_domain_map(struct irq_domain *d, unsigned int irq,
50 				 irq_hw_number_t hwirq)
51 {
52 	struct mx25_tsadc *tsadc = d->host_data;
53 
54 	irq_set_chip_data(irq, tsadc);
55 	irq_set_chip_and_handler(irq, &dummy_irq_chip,
56 				 handle_level_irq);
57 	irq_modify_status(irq, IRQ_NOREQUEST, IRQ_NOPROBE);
58 
59 	return 0;
60 }
61 
62 static const struct irq_domain_ops mx25_tsadc_domain_ops = {
63 	.map = mx25_tsadc_domain_map,
64 	.xlate = irq_domain_xlate_onecell,
65 };
66 
67 static int mx25_tsadc_setup_irq(struct platform_device *pdev,
68 				struct mx25_tsadc *tsadc)
69 {
70 	struct device *dev = &pdev->dev;
71 	struct device_node *np = dev->of_node;
72 	int irq;
73 
74 	irq = platform_get_irq(pdev, 0);
75 	if (irq <= 0) {
76 		dev_err(dev, "Failed to get irq\n");
77 		return irq;
78 	}
79 
80 	tsadc->domain = irq_domain_add_simple(np, 2, 0, &mx25_tsadc_domain_ops,
81 					      tsadc);
82 	if (!tsadc->domain) {
83 		dev_err(dev, "Failed to add irq domain\n");
84 		return -ENOMEM;
85 	}
86 
87 	irq_set_chained_handler_and_data(irq, mx25_tsadc_irq_handler, tsadc);
88 
89 	return 0;
90 }
91 
92 static void mx25_tsadc_setup_clk(struct platform_device *pdev,
93 				 struct mx25_tsadc *tsadc)
94 {
95 	unsigned clk_div;
96 
97 	/*
98 	 * According to the datasheet the ADC clock should never
99 	 * exceed 1,75 MHz. Base clock is the IPG and the ADC unit uses
100 	 * a funny clock divider. To keep the ADC conversion time constant
101 	 * adapt the ADC internal clock divider to the IPG clock rate.
102 	 */
103 
104 	dev_dbg(&pdev->dev, "Found master clock at %lu Hz\n",
105 		clk_get_rate(tsadc->clk));
106 
107 	clk_div = DIV_ROUND_UP(clk_get_rate(tsadc->clk), 1750000);
108 	dev_dbg(&pdev->dev, "Setting up ADC clock divider to %u\n", clk_div);
109 
110 	/* adc clock = IPG clock / (2 * div + 2) */
111 	clk_div -= 2;
112 	clk_div /= 2;
113 
114 	/*
115 	 * the ADC clock divider changes its behaviour when values below 4
116 	 * are used: it is fixed to "/ 10" in this case
117 	 */
118 	clk_div = max_t(unsigned, 4, clk_div);
119 
120 	dev_dbg(&pdev->dev, "Resulting ADC conversion clock at %lu Hz\n",
121 		clk_get_rate(tsadc->clk) / (2 * clk_div + 2));
122 
123 	regmap_update_bits(tsadc->regs, MX25_TSC_TGCR,
124 			   MX25_TGCR_ADCCLKCFG(0x1f),
125 			   MX25_TGCR_ADCCLKCFG(clk_div));
126 }
127 
128 static int mx25_tsadc_probe(struct platform_device *pdev)
129 {
130 	struct device *dev = &pdev->dev;
131 	struct mx25_tsadc *tsadc;
132 	struct resource *res;
133 	int ret;
134 	void __iomem *iomem;
135 
136 	tsadc = devm_kzalloc(dev, sizeof(*tsadc), GFP_KERNEL);
137 	if (!tsadc)
138 		return -ENOMEM;
139 
140 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
141 	iomem = devm_ioremap_resource(dev, res);
142 	if (IS_ERR(iomem))
143 		return PTR_ERR(iomem);
144 
145 	tsadc->regs = devm_regmap_init_mmio(dev, iomem,
146 					    &mx25_tsadc_regmap_config);
147 	if (IS_ERR(tsadc->regs)) {
148 		dev_err(dev, "Failed to initialize regmap\n");
149 		return PTR_ERR(tsadc->regs);
150 	}
151 
152 	tsadc->clk = devm_clk_get(dev, "ipg");
153 	if (IS_ERR(tsadc->clk)) {
154 		dev_err(dev, "Failed to get ipg clock\n");
155 		return PTR_ERR(tsadc->clk);
156 	}
157 
158 	/* setup clock according to the datasheet */
159 	mx25_tsadc_setup_clk(pdev, tsadc);
160 
161 	/* Enable clock and reset the component */
162 	regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_CLK_EN,
163 			   MX25_TGCR_CLK_EN);
164 	regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_TSC_RST,
165 			   MX25_TGCR_TSC_RST);
166 
167 	/* Setup powersaving mode, but enable internal reference voltage */
168 	regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_POWERMODE_MASK,
169 			   MX25_TGCR_POWERMODE_SAVE);
170 	regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_INTREFEN,
171 			   MX25_TGCR_INTREFEN);
172 
173 	ret = mx25_tsadc_setup_irq(pdev, tsadc);
174 	if (ret)
175 		return ret;
176 
177 	platform_set_drvdata(pdev, tsadc);
178 
179 	return devm_of_platform_populate(dev);
180 }
181 
182 static int mx25_tsadc_remove(struct platform_device *pdev)
183 {
184 	struct mx25_tsadc *tsadc = platform_get_drvdata(pdev);
185 	int irq = platform_get_irq(pdev, 0);
186 
187 	if (irq) {
188 		irq_set_chained_handler_and_data(irq, NULL, NULL);
189 		irq_domain_remove(tsadc->domain);
190 	}
191 
192 	return 0;
193 }
194 
195 static const struct of_device_id mx25_tsadc_ids[] = {
196 	{ .compatible = "fsl,imx25-tsadc" },
197 	{ /* Sentinel */ }
198 };
199 MODULE_DEVICE_TABLE(of, mx25_tsadc_ids);
200 
201 static struct platform_driver mx25_tsadc_driver = {
202 	.driver = {
203 		.name = "mx25-tsadc",
204 		.of_match_table = of_match_ptr(mx25_tsadc_ids),
205 	},
206 	.probe = mx25_tsadc_probe,
207 	.remove = mx25_tsadc_remove,
208 };
209 module_platform_driver(mx25_tsadc_driver);
210 
211 MODULE_DESCRIPTION("MFD for ADC/TSC for Freescale mx25");
212 MODULE_AUTHOR("Markus Pargmann <mpa@pengutronix.de>");
213 MODULE_LICENSE("GPL v2");
214 MODULE_ALIAS("platform:mx25-tsadc");
215