1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Multifunction miscellaneous devices 4# 5 6if HAS_IOMEM 7menu "Multifunction device drivers" 8 9config MFD_CORE 10 tristate 11 select IRQ_DOMAIN 12 default n 13 14config MFD_CS5535 15 tristate "AMD CS5535 and CS5536 southbridge core functions" 16 select MFD_CORE 17 depends on PCI && (X86_32 || (X86 && COMPILE_TEST)) 18 ---help--- 19 This is the core driver for CS5535/CS5536 MFD functions. This is 20 necessary for using the board's GPIO and MFGPT functionality. 21 22config MFD_ALTERA_A10SR 23 bool "Altera Arria10 DevKit System Resource chip" 24 depends on ARCH_SOCFPGA && SPI_MASTER=y && OF 25 select REGMAP_SPI 26 select MFD_CORE 27 help 28 Support for the Altera Arria10 DevKit MAX5 System Resource chip 29 using the SPI interface. This driver provides common support for 30 accessing the external gpio extender (LEDs & buttons) and 31 power supply alarms (hwmon). 32 33config MFD_ALTERA_SYSMGR 34 bool "Altera SOCFPGA System Manager" 35 depends on (ARCH_SOCFPGA || ARCH_STRATIX10) && OF 36 select MFD_SYSCON 37 help 38 Select this to get System Manager support for all Altera branded 39 SOCFPGAs. The SOCFPGA System Manager handles all SOCFPGAs by 40 using regmap_mmio accesses for ARM32 parts and SMC calls to 41 EL3 for ARM64 parts. 42 43config MFD_ACT8945A 44 tristate "Active-semi ACT8945A" 45 select MFD_CORE 46 select REGMAP_I2C 47 depends on I2C && OF 48 help 49 Support for the ACT8945A PMIC from Active-semi. This device 50 features three step-down DC/DC converters and four low-dropout 51 linear regulators, along with a complete ActivePath battery 52 charger. 53 54config MFD_SUN4I_GPADC 55 tristate "Allwinner sunxi platforms' GPADC MFD driver" 56 select MFD_CORE 57 select REGMAP_MMIO 58 select REGMAP_IRQ 59 depends on ARCH_SUNXI || COMPILE_TEST 60 depends on !TOUCHSCREEN_SUN4I 61 help 62 Select this to get support for Allwinner SoCs (A10, A13 and A31) ADC. 63 This driver will only map the hardware interrupt and registers, you 64 have to select individual drivers based on this MFD to be able to use 65 the ADC or the thermal sensor. This will try to probe the ADC driver 66 sun4i-gpadc-iio and the hwmon driver iio_hwmon. 67 68 To compile this driver as a module, choose M here: the module will be 69 called sun4i-gpadc. 70 71config MFD_AS3711 72 bool "AMS AS3711" 73 select MFD_CORE 74 select REGMAP_I2C 75 select REGMAP_IRQ 76 depends on I2C=y 77 help 78 Support for the AS3711 PMIC from AMS 79 80config MFD_AS3722 81 tristate "ams AS3722 Power Management IC" 82 select MFD_CORE 83 select REGMAP_I2C 84 select REGMAP_IRQ 85 depends on I2C=y && OF 86 help 87 The ams AS3722 is a compact system PMU suitable for mobile phones, 88 tablets etc. It has 4 DC/DC step-down regulators, 3 DC/DC step-down 89 controllers, 11 LDOs, RTC, automatic battery, temperature and 90 over current monitoring, GPIOs, ADC and a watchdog. 91 92config PMIC_ADP5520 93 bool "Analog Devices ADP5520/01 MFD PMIC Core Support" 94 depends on I2C=y 95 help 96 Say yes here to add support for Analog Devices AD5520 and ADP5501, 97 Multifunction Power Management IC. This includes 98 the I2C driver and the core APIs _only_, you have to select 99 individual components like LCD backlight, LEDs, GPIOs and Kepad 100 under the corresponding menus. 101 102config MFD_AAT2870_CORE 103 bool "AnalogicTech AAT2870" 104 select MFD_CORE 105 depends on I2C=y 106 depends on GPIOLIB || COMPILE_TEST 107 help 108 If you say yes here you get support for the AAT2870. 109 This driver provides common support for accessing the device, 110 additional drivers must be enabled in order to use the 111 functionality of the device. 112 113config MFD_AT91_USART 114 tristate "AT91 USART Driver" 115 select MFD_CORE 116 depends on ARCH_AT91 || COMPILE_TEST 117 help 118 Select this to get support for AT91 USART IP. This is a wrapper 119 over at91-usart-serial driver and usart-spi-driver. Only one function 120 can be used at a time. The choice is done at boot time by the probe 121 function of this MFD driver according to a device tree property. 122 123config MFD_ATMEL_FLEXCOM 124 tristate "Atmel Flexcom (Flexible Serial Communication Unit)" 125 select MFD_CORE 126 depends on OF 127 help 128 Select this to get support for Atmel Flexcom. This is a wrapper 129 which embeds a SPI controller, a I2C controller and a USART. Only 130 one function can be used at a time. The choice is done at boot time 131 by the probe function of this MFD driver according to a device tree 132 property. 133 134config MFD_ATMEL_HLCDC 135 tristate "Atmel HLCDC (High-end LCD Controller)" 136 select MFD_CORE 137 select REGMAP_MMIO 138 depends on OF 139 help 140 If you say yes here you get support for the HLCDC block. 141 This driver provides common support for accessing the device, 142 additional drivers must be enabled in order to use the 143 functionality of the device. 144 145config MFD_ATMEL_SMC 146 bool 147 select MFD_SYSCON 148 149config MFD_BCM590XX 150 tristate "Broadcom BCM590xx PMUs" 151 select MFD_CORE 152 select REGMAP_I2C 153 depends on I2C 154 help 155 Support for the BCM590xx PMUs from Broadcom 156 157config MFD_BD9571MWV 158 tristate "ROHM BD9571MWV PMIC" 159 select MFD_CORE 160 select REGMAP_I2C 161 select REGMAP_IRQ 162 depends on I2C 163 help 164 Support for the ROHM BD9571MWV PMIC, which contains single 165 voltage regulator, voltage sampling units, GPIO block and 166 watchdog block. 167 168 This driver can also be built as a module. If so, the module 169 will be called bd9571mwv. 170 171config MFD_AC100 172 tristate "X-Powers AC100" 173 select MFD_CORE 174 depends on SUNXI_RSB 175 help 176 If you say Y here you get support for the X-Powers AC100 audio codec 177 IC. 178 This driver include only the core APIs. You have to select individual 179 components like codecs or RTC under the corresponding menus. 180 181config MFD_AXP20X 182 tristate 183 select MFD_CORE 184 select REGMAP_IRQ 185 186config MFD_AXP20X_I2C 187 tristate "X-Powers AXP series PMICs with I2C" 188 select MFD_AXP20X 189 select REGMAP_I2C 190 depends on I2C 191 help 192 If you say Y here you get support for the X-Powers AXP series power 193 management ICs (PMICs) controlled with I2C. 194 This driver include only the core APIs. You have to select individual 195 components like regulators or the PEK (Power Enable Key) under the 196 corresponding menus. 197 198 Note on x86 this provides an ACPI OpRegion, so this must be 'y' 199 (builtin) and not a module, as the OpRegion must be available as 200 soon as possible. For the same reason the I2C bus driver options 201 I2C_DESIGNWARE_PLATFORM and I2C_DESIGNWARE_BAYTRAIL must be 'y' too. 202 203config MFD_AXP20X_RSB 204 tristate "X-Powers AXP series PMICs with RSB" 205 select MFD_AXP20X 206 depends on SUNXI_RSB 207 help 208 If you say Y here you get support for the X-Powers AXP series power 209 management ICs (PMICs) controlled with RSB. 210 This driver include only the core APIs. You have to select individual 211 components like regulators or the PEK (Power Enable Key) under the 212 corresponding menus. 213 214config MFD_CROS_EC_DEV 215 tristate "ChromeOS Embedded Controller multifunction device" 216 select MFD_CORE 217 depends on CROS_EC 218 default CROS_EC 219 help 220 Select this to get support for ChromeOS Embedded Controller 221 sub-devices. This driver will instantiate additional drivers such 222 as RTC, USBPD, etc. but you have to select the individual drivers. 223 224 To compile this driver as a module, choose M here: the module will be 225 called cros-ec-dev. 226 227config MFD_MADERA 228 tristate "Cirrus Logic Madera codecs" 229 select MFD_CORE 230 select REGMAP 231 select REGMAP_IRQ 232 select MADERA_IRQ 233 select PINCTRL 234 select PINCTRL_MADERA 235 help 236 Support for the Cirrus Logic Madera platform audio codecs 237 238config MFD_MADERA_I2C 239 tristate "Cirrus Logic Madera codecs with I2C" 240 depends on MFD_MADERA 241 depends on I2C 242 select REGMAP_I2C 243 help 244 Support for the Cirrus Logic Madera platform audio SoC 245 core functionality controlled via I2C. 246 247config MFD_MADERA_SPI 248 tristate "Cirrus Logic Madera codecs with SPI" 249 depends on MFD_MADERA 250 depends on SPI_MASTER 251 select REGMAP_SPI 252 help 253 Support for the Cirrus Logic Madera platform audio SoC 254 core functionality controlled via SPI. 255 256config MFD_CS47L15 257 bool "Cirrus Logic CS47L15" 258 select PINCTRL_CS47L15 259 depends on MFD_MADERA 260 help 261 Support for Cirrus Logic CS47L15 Smart Codec 262 263config MFD_CS47L35 264 bool "Cirrus Logic CS47L35" 265 select PINCTRL_CS47L35 266 depends on MFD_MADERA 267 help 268 Support for Cirrus Logic CS47L35 Smart Codec 269 270config MFD_CS47L85 271 bool "Cirrus Logic CS47L85" 272 select PINCTRL_CS47L85 273 depends on MFD_MADERA 274 help 275 Support for Cirrus Logic CS47L85 Smart Codec 276 277config MFD_CS47L90 278 bool "Cirrus Logic CS47L90/91" 279 select PINCTRL_CS47L90 280 depends on MFD_MADERA 281 help 282 Support for Cirrus Logic CS47L90 and CS47L91 Smart Codecs 283 284config MFD_CS47L92 285 bool "Cirrus Logic CS47L92/93" 286 select PINCTRL_CS47L92 287 depends on MFD_MADERA 288 help 289 Support for Cirrus Logic CS42L92, CS47L92 and CS47L93 Smart Codecs 290 291config MFD_ASIC3 292 bool "Compaq ASIC3" 293 depends on GPIOLIB && ARM 294 select MFD_CORE 295 ---help--- 296 This driver supports the ASIC3 multifunction chip found on many 297 PDAs (mainly iPAQ and HTC based ones) 298 299config PMIC_DA903X 300 bool "Dialog Semiconductor DA9030/DA9034 PMIC Support" 301 depends on I2C=y 302 help 303 Say yes here to add support for Dialog Semiconductor DA9030 (a.k.a 304 ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC 305 usually found on PXA processors-based platforms. This includes 306 the I2C driver and the core APIs _only_, you have to select 307 individual components like LCD backlight, voltage regulators, 308 LEDs and battery-charger under the corresponding menus. 309 310config PMIC_DA9052 311 bool 312 select MFD_CORE 313 314config MFD_DA9052_SPI 315 bool "Dialog Semiconductor DA9052/53 PMIC variants with SPI" 316 select REGMAP_SPI 317 select REGMAP_IRQ 318 select PMIC_DA9052 319 depends on SPI_MASTER=y 320 help 321 Support for the Dialog Semiconductor DA9052 PMIC 322 when controlled using SPI. This driver provides common support 323 for accessing the device, additional drivers must be enabled in 324 order to use the functionality of the device. 325 326config MFD_DA9052_I2C 327 bool "Dialog Semiconductor DA9052/53 PMIC variants with I2C" 328 select REGMAP_I2C 329 select REGMAP_IRQ 330 select PMIC_DA9052 331 depends on I2C=y 332 help 333 Support for the Dialog Semiconductor DA9052 PMIC 334 when controlled using I2C. This driver provides common support 335 for accessing the device, additional drivers must be enabled in 336 order to use the functionality of the device. 337 338config MFD_DA9055 339 bool "Dialog Semiconductor DA9055 PMIC Support" 340 select REGMAP_I2C 341 select REGMAP_IRQ 342 select MFD_CORE 343 depends on I2C=y 344 help 345 Say yes here for support of Dialog Semiconductor DA9055. This is 346 a Power Management IC. This driver provides common support for 347 accessing the device as well as the I2C interface to the chip itself. 348 Additional drivers must be enabled in order to use the functionality 349 of the device. 350 351 This driver can be built as a module. If built as a module it will be 352 called "da9055" 353 354config MFD_DA9062 355 tristate "Dialog Semiconductor DA9062/61 PMIC Support" 356 select MFD_CORE 357 select REGMAP_I2C 358 select REGMAP_IRQ 359 depends on I2C 360 help 361 Say yes here for support for the Dialog Semiconductor DA9061 and 362 DA9062 PMICs. 363 This includes the I2C driver and core APIs. 364 Additional drivers must be enabled in order to use the functionality 365 of the device. 366 367config MFD_DA9063 368 tristate "Dialog Semiconductor DA9063 PMIC Support" 369 select MFD_CORE 370 select REGMAP_I2C 371 select REGMAP_IRQ 372 depends on I2C 373 help 374 Say yes here for support for the Dialog Semiconductor DA9063 PMIC. 375 This includes the I2C driver and core APIs. 376 Additional drivers must be enabled in order to use the functionality 377 of the device. 378 379config MFD_DA9150 380 tristate "Dialog Semiconductor DA9150 Charger Fuel-Gauge chip" 381 depends on I2C 382 select MFD_CORE 383 select REGMAP_I2C 384 select REGMAP_IRQ 385 help 386 This adds support for the DA9150 integrated charger and fuel-gauge 387 chip. This driver provides common support for accessing the device. 388 Additional drivers must be enabled in order to use the specific 389 features of the device. 390 391config MFD_DLN2 392 tristate "Diolan DLN2 support" 393 select MFD_CORE 394 depends on USB 395 help 396 This adds support for Diolan USB-I2C/SPI/GPIO Master Adapter 397 DLN-2. Additional drivers such as I2C_DLN2, GPIO_DLN2, 398 etc. must be enabled in order to use the functionality of 399 the device. 400 401config MFD_EXYNOS_LPASS 402 tristate "Samsung Exynos SoC Low Power Audio Subsystem" 403 depends on ARCH_EXYNOS || COMPILE_TEST 404 select MFD_CORE 405 select REGMAP_MMIO 406 help 407 Select this option to enable support for Samsung Exynos Low Power 408 Audio Subsystem. 409 410config MFD_MC13XXX 411 tristate 412 depends on (SPI_MASTER || I2C) 413 select MFD_CORE 414 select REGMAP_IRQ 415 help 416 Enable support for the Freescale MC13783 and MC13892 PMICs. 417 This driver provides common support for accessing the device, 418 additional drivers must be enabled in order to use the 419 functionality of the device. 420 421config MFD_MC13XXX_SPI 422 tristate "Freescale MC13783 and MC13892 SPI interface" 423 depends on SPI_MASTER 424 select REGMAP_SPI 425 select MFD_MC13XXX 426 help 427 Select this if your MC13xxx is connected via an SPI bus. 428 429config MFD_MC13XXX_I2C 430 tristate "Freescale MC13892 I2C interface" 431 depends on I2C 432 select REGMAP_I2C 433 select MFD_MC13XXX 434 help 435 Select this if your MC13xxx is connected via an I2C bus. 436 437config MFD_MXS_LRADC 438 tristate "Freescale i.MX23/i.MX28 LRADC" 439 depends on ARCH_MXS || COMPILE_TEST 440 select MFD_CORE 441 select STMP_DEVICE 442 help 443 Say yes here to build support for the Low Resolution 444 Analog-to-Digital Converter (LRADC) found on the i.MX23 and i.MX28 445 processors. This driver provides common support for accessing the 446 device, additional drivers must be enabled in order to use the 447 functionality of the device: 448 mxs-lradc-adc for ADC readings 449 mxs-lradc-ts for touchscreen support 450 451 This driver can also be built as a module. If so, the module will be 452 called mxs-lradc. 453 454config MFD_MX25_TSADC 455 tristate "Freescale i.MX25 integrated Touchscreen and ADC unit" 456 select REGMAP_MMIO 457 depends on (SOC_IMX25 && OF) || COMPILE_TEST 458 help 459 Enable support for the integrated Touchscreen and ADC unit of the 460 i.MX25 processors. They consist of a conversion queue for general 461 purpose ADC and a queue for Touchscreens. 462 463config MFD_HI6421_PMIC 464 tristate "HiSilicon Hi6421 PMU/Codec IC" 465 depends on OF 466 select MFD_CORE 467 select REGMAP_MMIO 468 help 469 Add support for HiSilicon Hi6421 PMIC. Hi6421 includes multi- 470 functions, such as regulators, RTC, codec, Coulomb counter, etc. 471 This driver includes core APIs _only_. You have to select 472 individul components like voltage regulators under corresponding 473 menus in order to enable them. 474 We communicate with the Hi6421 via memory-mapped I/O. 475 476config MFD_HI655X_PMIC 477 tristate "HiSilicon Hi655X series PMU/Codec IC" 478 depends on ARCH_HISI || COMPILE_TEST 479 depends on OF 480 select MFD_CORE 481 select REGMAP_MMIO 482 select REGMAP_IRQ 483 help 484 Select this option to enable Hisilicon hi655x series pmic driver. 485 486config HTC_PASIC3 487 tristate "HTC PASIC3 LED/DS1WM chip support" 488 select MFD_CORE 489 help 490 This core driver provides register access for the LED/DS1WM 491 chips labeled "AIC2" and "AIC3", found on HTC Blueangel and 492 HTC Magician devices, respectively. Actual functionality is 493 handled by the leds-pasic3 and ds1wm drivers. 494 495config HTC_I2CPLD 496 bool "HTC I2C PLD chip support" 497 depends on I2C=y && GPIOLIB 498 help 499 If you say yes here you get support for the supposed CPLD 500 found on omap850 HTC devices like the HTC Wizard and HTC Herald. 501 This device provides input and output GPIOs through an I2C 502 interface to one or more sub-chips. 503 504config MFD_INTEL_QUARK_I2C_GPIO 505 tristate "Intel Quark MFD I2C GPIO" 506 depends on PCI 507 depends on X86 508 depends on COMMON_CLK 509 select MFD_CORE 510 help 511 This MFD provides support for I2C and GPIO that exist only 512 in a single PCI device. It splits the 2 IO devices to 513 their respective IO driver. 514 The GPIO exports a total amount of 8 interrupt-capable GPIOs. 515 516config LPC_ICH 517 tristate "Intel ICH LPC" 518 depends on PCI 519 select MFD_CORE 520 help 521 The LPC bridge function of the Intel ICH provides support for 522 many functional units. This driver provides needed support for 523 other drivers to control these functions, currently GPIO and 524 watchdog. 525 526config LPC_SCH 527 tristate "Intel SCH LPC" 528 depends on PCI 529 select MFD_CORE 530 help 531 LPC bridge function of the Intel SCH provides support for 532 System Management Bus and General Purpose I/O. 533 534config INTEL_SOC_PMIC 535 bool "Support for Crystal Cove PMIC" 536 depends on ACPI && HAS_IOMEM && I2C=y && GPIOLIB && COMMON_CLK 537 depends on X86 || COMPILE_TEST 538 depends on I2C_DESIGNWARE_PLATFORM=y 539 select MFD_CORE 540 select REGMAP_I2C 541 select REGMAP_IRQ 542 help 543 Select this option to enable support for Crystal Cove PMIC 544 on some Intel SoC systems. The PMIC provides ADC, GPIO, 545 thermal, charger and related power management functions 546 on these systems. 547 548 This option is a bool as it provides an ACPI OpRegion which must be 549 available before any devices using it are probed. This option also 550 causes the designware-i2c driver to be builtin for the same reason. 551 552config INTEL_SOC_PMIC_BXTWC 553 tristate "Support for Intel Broxton Whiskey Cove PMIC" 554 depends on INTEL_PMC_IPC 555 select MFD_CORE 556 select REGMAP_IRQ 557 help 558 Select this option to enable support for Whiskey Cove PMIC 559 on Intel Broxton systems. The PMIC provides ADC, GPIO, 560 thermal, charger and related power management functions 561 on these systems. 562 563config INTEL_SOC_PMIC_CHTWC 564 bool "Support for Intel Cherry Trail Whiskey Cove PMIC" 565 depends on ACPI && HAS_IOMEM && I2C=y && COMMON_CLK 566 depends on X86 || COMPILE_TEST 567 depends on I2C_DESIGNWARE_PLATFORM=y 568 select MFD_CORE 569 select REGMAP_I2C 570 select REGMAP_IRQ 571 help 572 Select this option to enable support for the Intel Cherry Trail 573 Whiskey Cove PMIC found on some Intel Cherry Trail systems. 574 575 This option is a bool as it provides an ACPI OpRegion which must be 576 available before any devices using it are probed. This option also 577 causes the designware-i2c driver to be builtin for the same reason. 578 579config INTEL_SOC_PMIC_CHTDC_TI 580 tristate "Support for Intel Cherry Trail Dollar Cove TI PMIC" 581 depends on GPIOLIB 582 depends on I2C 583 depends on ACPI 584 depends on X86 585 select MFD_CORE 586 select REGMAP_I2C 587 select REGMAP_IRQ 588 help 589 Select this option for supporting Dollar Cove (TI version) PMIC 590 device that is found on some Intel Cherry Trail systems. 591 592config INTEL_SOC_PMIC_MRFLD 593 tristate "Support for Intel Merrifield Basin Cove PMIC" 594 depends on GPIOLIB 595 depends on ACPI 596 depends on INTEL_SCU_IPC 597 select MFD_CORE 598 select REGMAP_IRQ 599 help 600 Select this option for supporting Basin Cove PMIC device 601 that is found on Intel Merrifield systems. 602 603config MFD_INTEL_LPSS 604 tristate 605 select COMMON_CLK 606 select MFD_CORE 607 608config MFD_INTEL_LPSS_ACPI 609 tristate "Intel Low Power Subsystem support in ACPI mode" 610 select MFD_INTEL_LPSS 611 depends on X86 && ACPI 612 help 613 This driver supports Intel Low Power Subsystem (LPSS) devices such as 614 I2C, SPI and HS-UART starting from Intel Sunrisepoint (Intel Skylake 615 PCH) in ACPI mode. 616 617config MFD_INTEL_LPSS_PCI 618 tristate "Intel Low Power Subsystem support in PCI mode" 619 select MFD_INTEL_LPSS 620 depends on X86 && PCI 621 help 622 This driver supports Intel Low Power Subsystem (LPSS) devices such as 623 I2C, SPI and HS-UART starting from Intel Sunrisepoint (Intel Skylake 624 PCH) in PCI mode. 625 626config MFD_INTEL_MSIC 627 bool "Intel MSIC" 628 depends on INTEL_SCU_IPC 629 select MFD_CORE 630 help 631 Select this option to enable access to Intel MSIC (Avatele 632 Passage) chip. This chip embeds audio, battery, GPIO, etc. 633 devices used in Intel Medfield platforms. 634 635config MFD_IPAQ_MICRO 636 bool "Atmel Micro ASIC (iPAQ h3100/h3600/h3700) Support" 637 depends on SA1100_H3100 || SA1100_H3600 638 select MFD_CORE 639 help 640 Select this to get support for the Microcontroller found in 641 the Compaq iPAQ handheld computers. This is an Atmel 642 AT90LS8535 microcontroller flashed with a special iPAQ 643 firmware using the custom protocol implemented in this driver. 644 645config MFD_JANZ_CMODIO 646 tristate "Janz CMOD-IO PCI MODULbus Carrier Board" 647 select MFD_CORE 648 depends on PCI 649 help 650 This is the core driver for the Janz CMOD-IO PCI MODULbus 651 carrier board. This device is a PCI to MODULbus bridge which may 652 host many different types of MODULbus daughterboards, including 653 CAN and GPIO controllers. 654 655config MFD_KEMPLD 656 tristate "Kontron module PLD device" 657 select MFD_CORE 658 help 659 This is the core driver for the PLD (Programmable Logic Device) found 660 on some Kontron ETX and COMexpress (ETXexpress) modules. The PLD 661 device may provide functions like watchdog, GPIO, UART and I2C bus. 662 663 The following modules are supported: 664 * COMe-bBD# 665 * COMe-bBL6 666 * COMe-bHL6 667 * COMe-bSL6 668 * COMe-bIP# 669 * COMe-bKL6 670 * COMe-bPC2 (ETXexpress-PC) 671 * COMe-bSC# (ETXexpress-SC T#) 672 * COMe-cAL6 673 * COMe-cBL6 674 * COMe-cBT6 675 * COMe-cBW6 676 * COMe-cCT6 677 * COMe-cDC2 (microETXexpress-DC) 678 * COMe-cHL6 679 * COMe-cKL6 680 * COMe-cPC2 (microETXexpress-PC) 681 * COMe-cSL6 682 * COMe-mAL10 683 * COMe-mBT10 684 * COMe-mCT10 685 * COMe-mTT10 (nanoETXexpress-TT) 686 * ETX-OH 687 688 This driver can also be built as a module. If so, the module 689 will be called kempld-core. 690 691config MFD_88PM800 692 tristate "Marvell 88PM800" 693 depends on I2C 694 select REGMAP_I2C 695 select REGMAP_IRQ 696 select MFD_CORE 697 help 698 This supports for Marvell 88PM800 Power Management IC. 699 This includes the I2C driver and the core APIs _only_, you have to 700 select individual components like voltage regulators, RTC and 701 battery-charger under the corresponding menus. 702 703config MFD_88PM805 704 tristate "Marvell 88PM805" 705 depends on I2C 706 select REGMAP_I2C 707 select REGMAP_IRQ 708 select MFD_CORE 709 help 710 This supports for Marvell 88PM805 Power Management IC. This includes 711 the I2C driver and the core APIs _only_, you have to select individual 712 components like codec device, headset/Mic device under the 713 corresponding menus. 714 715config MFD_88PM860X 716 bool "Marvell 88PM8606/88PM8607" 717 depends on I2C=y 718 select REGMAP_I2C 719 select MFD_CORE 720 help 721 This supports for Marvell 88PM8606/88PM8607 Power Management IC. 722 This includes the I2C driver and the core APIs _only_, you have to 723 select individual components like voltage regulators, RTC and 724 battery-charger under the corresponding menus. 725 726config MFD_MAX14577 727 tristate "Maxim Semiconductor MAX14577/77836 MUIC + Charger Support" 728 depends on I2C 729 select MFD_CORE 730 select REGMAP_I2C 731 select REGMAP_IRQ 732 select IRQ_DOMAIN 733 help 734 Say yes here to add support for Maxim Semiconductor MAX14577 and 735 MAX77836 Micro-USB ICs with battery charger. 736 This driver provides common support for accessing the device; 737 additional drivers must be enabled in order to use the functionality 738 of the device. 739 740config MFD_MAX77620 741 bool "Maxim Semiconductor MAX77620 and MAX20024 PMIC Support" 742 depends on I2C=y 743 depends on OF || COMPILE_TEST 744 select MFD_CORE 745 select REGMAP_I2C 746 select REGMAP_IRQ 747 select IRQ_DOMAIN 748 help 749 Say yes here to add support for Maxim Semiconductor MAX77620 and 750 MAX20024 which are Power Management IC with General purpose pins, 751 RTC, regulators, clock generator, watchdog etc. This driver 752 provides common support for accessing the device; additional drivers 753 must be enabled in order to use the functionality of the device. 754 755config MFD_MAX77650 756 tristate "Maxim MAX77650/77651 PMIC Support" 757 depends on I2C 758 depends on OF || COMPILE_TEST 759 select MFD_CORE 760 select REGMAP_I2C 761 select REGMAP_IRQ 762 help 763 Say Y here to add support for Maxim Semiconductor MAX77650 and 764 MAX77651 Power Management ICs. This is the core multifunction 765 driver for interacting with the device. The module name is 766 'max77650'. Additional drivers can be enabled in order to use 767 the following functionalities of the device: GPIO, regulator, 768 charger, LED, onkey. 769 770config MFD_MAX77686 771 tristate "Maxim Semiconductor MAX77686/802 PMIC Support" 772 depends on I2C 773 depends on OF || COMPILE_TEST 774 select MFD_CORE 775 select REGMAP_I2C 776 select REGMAP_IRQ 777 select IRQ_DOMAIN 778 help 779 Say yes here to add support for Maxim Semiconductor MAX77686 and 780 MAX77802 which are Power Management IC with an RTC on chip. 781 This driver provides common support for accessing the device; 782 additional drivers must be enabled in order to use the functionality 783 of the device. 784 785config MFD_MAX77693 786 tristate "Maxim Semiconductor MAX77693 PMIC Support" 787 depends on I2C 788 select MFD_CORE 789 select REGMAP_I2C 790 select REGMAP_IRQ 791 help 792 Say yes here to add support for Maxim Semiconductor MAX77693. 793 This is a companion Power Management IC with Flash, Haptic, Charger, 794 and MUIC(Micro USB Interface Controller) controls on chip. 795 This driver provides common support for accessing the device; 796 additional drivers must be enabled in order to use the functionality 797 of the device. 798 799config MFD_MAX77843 800 bool "Maxim Semiconductor MAX77843 PMIC Support" 801 depends on I2C=y 802 select MFD_CORE 803 select REGMAP_I2C 804 select REGMAP_IRQ 805 help 806 Say yes here to add support for Maxim Semiconductor MAX77843. 807 This is companion Power Management IC with LEDs, Haptic, Charger, 808 Fuel Gauge, MUIC(Micro USB Interface Controller) controls on chip. 809 This driver provides common support for accessing the device; 810 additional drivers must be enabled in order to use the functionality 811 of the device. 812 813config MFD_MAX8907 814 tristate "Maxim Semiconductor MAX8907 PMIC Support" 815 select MFD_CORE 816 depends on I2C 817 select REGMAP_I2C 818 select REGMAP_IRQ 819 help 820 Say yes here to add support for Maxim Semiconductor MAX8907. This is 821 a Power Management IC. This driver provides common support for 822 accessing the device; additional drivers must be enabled in order 823 to use the functionality of the device. 824 825config MFD_MAX8925 826 bool "Maxim Semiconductor MAX8925 PMIC Support" 827 depends on I2C=y 828 select MFD_CORE 829 help 830 Say yes here to add support for Maxim Semiconductor MAX8925. This is 831 a Power Management IC. This driver provides common support for 832 accessing the device, additional drivers must be enabled in order 833 to use the functionality of the device. 834 835config MFD_MAX8997 836 bool "Maxim Semiconductor MAX8997/8966 PMIC Support" 837 depends on I2C=y 838 select MFD_CORE 839 select IRQ_DOMAIN 840 help 841 Say yes here to add support for Maxim Semiconductor MAX8997/8966. 842 This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic, 843 MUIC controls on chip. 844 This driver provides common support for accessing the device; 845 additional drivers must be enabled in order to use the functionality 846 of the device. 847 848config MFD_MAX8998 849 bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support" 850 depends on I2C=y 851 select MFD_CORE 852 select IRQ_DOMAIN 853 help 854 Say yes here to add support for Maxim Semiconductor MAX8998 and 855 National Semiconductor LP3974. This is a Power Management IC. 856 This driver provides common support for accessing the device, 857 additional drivers must be enabled in order to use the functionality 858 of the device. 859 860config MFD_MT6397 861 tristate "MediaTek MT6397 PMIC Support" 862 select MFD_CORE 863 select IRQ_DOMAIN 864 help 865 Say yes here to add support for MediaTek MT6397 PMIC. This is 866 a Power Management IC. This driver provides common support for 867 accessing the device; additional drivers must be enabled in order 868 to use the functionality of the device. 869 870config MFD_MENF21BMC 871 tristate "MEN 14F021P00 Board Management Controller Support" 872 depends on I2C 873 select MFD_CORE 874 help 875 Say yes here to add support for the MEN 14F021P00 BMC 876 which is a Board Management Controller connected to the I2C bus. 877 The device supports multiple sub-devices like LED, HWMON and WDT. 878 This driver provides common support for accessing the devices; 879 additional drivers must be enabled in order to use the 880 functionality of the BMC device. 881 882 This driver can also be built as a module. If so the module 883 will be called menf21bmc. 884 885config EZX_PCAP 886 bool "Motorola EZXPCAP Support" 887 depends on SPI_MASTER 888 help 889 This enables the PCAP ASIC present on EZX Phones. This is 890 needed for MMC, TouchScreen, Sound, USB, etc.. 891 892config MFD_CPCAP 893 tristate "Support for Motorola CPCAP" 894 depends on SPI 895 depends on OF || COMPILE_TEST 896 select REGMAP_SPI 897 select REGMAP_IRQ 898 help 899 Say yes here if you want to include driver for CPCAP. 900 It is used on many Motorola phones and tablets as a PMIC. 901 At least Motorola Droid 4 is known to use CPCAP. 902 903config MFD_VIPERBOARD 904 tristate "Nano River Technologies Viperboard" 905 select MFD_CORE 906 depends on USB 907 default n 908 help 909 Say yes here if you want support for Nano River Technologies 910 Viperboard. 911 There are mfd cell drivers available for i2c master, adc and 912 both gpios found on the board. The spi part does not yet 913 have a driver. 914 You need to select the mfd cell drivers separately. 915 The drivers do not support all features the board exposes. 916 917config MFD_RETU 918 tristate "Nokia Retu and Tahvo multi-function device" 919 select MFD_CORE 920 depends on I2C 921 select REGMAP_IRQ 922 help 923 Retu and Tahvo are a multi-function devices found on Nokia 924 Internet Tablets (770, N800 and N810). 925 926config MFD_PCF50633 927 tristate "NXP PCF50633" 928 depends on I2C 929 select REGMAP_I2C 930 help 931 Say yes here if you have NXP PCF50633 chip on your board. 932 This core driver provides register access and IRQ handling 933 facilities, and registers devices for the various functions 934 so that function-specific drivers can bind to them. 935 936config PCF50633_ADC 937 tristate "NXP PCF50633 ADC" 938 depends on MFD_PCF50633 939 help 940 Say yes here if you want to include support for ADC in the 941 NXP PCF50633 chip. 942 943config PCF50633_GPIO 944 tristate "NXP PCF50633 GPIO" 945 depends on MFD_PCF50633 946 help 947 Say yes here if you want to include support GPIO for pins on 948 the PCF50633 chip. 949 950config UCB1400_CORE 951 tristate "Philips UCB1400 Core driver" 952 depends on AC97_BUS 953 depends on GPIOLIB 954 help 955 This enables support for the Philips UCB1400 core functions. 956 The UCB1400 is an AC97 audio codec. 957 958 To compile this driver as a module, choose M here: the 959 module will be called ucb1400_core. 960 961config MFD_PM8XXX 962 tristate "Qualcomm PM8xxx PMIC chips driver" 963 depends on (ARM || HEXAGON || COMPILE_TEST) 964 select IRQ_DOMAIN_HIERARCHY 965 select MFD_CORE 966 select REGMAP 967 help 968 If you say yes to this option, support will be included for the 969 built-in PM8xxx PMIC chips. 970 971 This is required if your board has a PM8xxx and uses its features, 972 such as: MPPs, GPIOs, regulators, interrupts, and PWM. 973 974 Say M here if you want to include support for PM8xxx chips as a 975 module. This will build a module called "pm8xxx-core". 976 977config MFD_QCOM_RPM 978 tristate "Qualcomm Resource Power Manager (RPM)" 979 depends on ARCH_QCOM && OF 980 help 981 If you say yes to this option, support will be included for the 982 Resource Power Manager system found in the Qualcomm 8660, 8960 and 983 8064 based devices. 984 985 This is required to access many regulators, clocks and bus 986 frequencies controlled by the RPM on these devices. 987 988 Say M here if you want to include support for the Qualcomm RPM as a 989 module. This will build a module called "qcom_rpm". 990 991config MFD_SPMI_PMIC 992 tristate "Qualcomm SPMI PMICs" 993 depends on ARCH_QCOM || COMPILE_TEST 994 depends on OF 995 depends on SPMI 996 select REGMAP_SPMI 997 help 998 This enables support for the Qualcomm SPMI PMICs. 999 These PMICs are currently used with the Snapdragon 800 series of 1000 SoCs. Note, that this will only be useful paired with descriptions 1001 of the independent functions as children nodes in the device tree. 1002 1003 Say M here if you want to include support for the SPMI PMIC 1004 series as a module. The module will be called "qcom-spmi-pmic". 1005 1006config MFD_RDC321X 1007 tristate "RDC R-321x southbridge" 1008 select MFD_CORE 1009 depends on PCI 1010 help 1011 Say yes here if you want to have support for the RDC R-321x SoC 1012 southbridge which provides access to GPIOs and Watchdog using the 1013 southbridge PCI device configuration space. 1014 1015config MFD_RT5033 1016 tristate "Richtek RT5033 Power Management IC" 1017 depends on I2C 1018 select MFD_CORE 1019 select REGMAP_I2C 1020 select REGMAP_IRQ 1021 help 1022 This driver provides for the Richtek RT5033 Power Management IC, 1023 which includes the I2C driver and the Core APIs. This driver provides 1024 common support for accessing the device. The device supports multiple 1025 sub-devices like charger, fuel gauge, flash LED, current source, 1026 LDO and Buck. 1027 1028config MFD_RC5T583 1029 bool "Ricoh RC5T583 Power Management system device" 1030 depends on I2C=y 1031 select MFD_CORE 1032 select REGMAP_I2C 1033 help 1034 Select this option to get support for the RICOH583 Power 1035 Management system device. 1036 This driver provides common support for accessing the device 1037 through i2c interface. The device supports multiple sub-devices 1038 like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey. 1039 Additional drivers must be enabled in order to use the 1040 different functionality of the device. 1041 1042config MFD_RK808 1043 tristate "Rockchip RK805/RK808/RK809/RK817/RK818 Power Management Chip" 1044 depends on I2C && OF 1045 select MFD_CORE 1046 select REGMAP_I2C 1047 select REGMAP_IRQ 1048 help 1049 If you say yes here you get support for the RK805, RK808, RK809, 1050 RK817 and RK818 Power Management chips. 1051 This driver provides common support for accessing the device 1052 through I2C interface. The device supports multiple sub-devices 1053 including interrupts, RTC, LDO & DCDC regulators, and onkey. 1054 1055config MFD_RN5T618 1056 tristate "Ricoh RN5T567/618 PMIC" 1057 depends on I2C 1058 depends on OF 1059 select MFD_CORE 1060 select REGMAP_I2C 1061 help 1062 Say yes here to add support for the Ricoh RN5T567, 1063 RN5T618, RC5T619 PMIC. 1064 This driver provides common support for accessing the device, 1065 additional drivers must be enabled in order to use the 1066 functionality of the device. 1067 1068config MFD_SEC_CORE 1069 tristate "Samsung Electronics PMIC Series Support" 1070 depends on I2C=y 1071 select MFD_CORE 1072 select REGMAP_I2C 1073 select REGMAP_IRQ 1074 help 1075 Support for the Samsung Electronics PMIC devices coming 1076 usually along with Samsung Exynos SoC chipset. 1077 This driver provides common support for accessing the device, 1078 additional drivers must be enabled in order to use the functionality 1079 of the device 1080 1081 To compile this driver as a module, choose M here: the 1082 module will be called sec-core. 1083 Have in mind that important core drivers (like regulators) depend 1084 on this driver so building this as a module might require proper 1085 initial ramdisk or might not boot up as well in certain scenarios. 1086 1087config MFD_SI476X_CORE 1088 tristate "Silicon Laboratories 4761/64/68 AM/FM radio." 1089 depends on I2C 1090 select MFD_CORE 1091 select REGMAP_I2C 1092 help 1093 This is the core driver for the SI476x series of AM/FM 1094 radio. This MFD driver connects the radio-si476x V4L2 module 1095 and the si476x audio codec. 1096 1097 To compile this driver as a module, choose M here: the 1098 module will be called si476x-core. 1099 1100config MFD_SM501 1101 tristate "Silicon Motion SM501" 1102 depends on HAS_DMA 1103 ---help--- 1104 This is the core driver for the Silicon Motion SM501 multimedia 1105 companion chip. This device is a multifunction device which may 1106 provide numerous interfaces including USB host controller, USB gadget, 1107 asynchronous serial ports, audio functions, and a dual display video 1108 interface. The device may be connected by PCI or local bus with 1109 varying functions enabled. 1110 1111config MFD_SM501_GPIO 1112 bool "Export GPIO via GPIO layer" 1113 depends on MFD_SM501 && GPIOLIB 1114 ---help--- 1115 This option uses the gpio library layer to export the 64 GPIO 1116 lines on the SM501. The platform data is used to supply the 1117 base number for the first GPIO line to register. 1118 1119config MFD_SKY81452 1120 tristate "Skyworks Solutions SKY81452" 1121 select MFD_CORE 1122 select REGMAP_I2C 1123 depends on I2C 1124 help 1125 This is the core driver for the Skyworks SKY81452 backlight and 1126 voltage regulator device. 1127 1128 This driver can also be built as a module. If so, the module 1129 will be called sky81452. 1130 1131config MFD_SMSC 1132 bool "SMSC ECE1099 series chips" 1133 depends on I2C=y 1134 select MFD_CORE 1135 select REGMAP_I2C 1136 help 1137 If you say yes here you get support for the 1138 ece1099 chips from SMSC. 1139 1140 To compile this driver as a module, choose M here: the 1141 module will be called smsc. 1142 1143config MFD_SC27XX_PMIC 1144 tristate "Spreadtrum SC27xx PMICs" 1145 depends on ARCH_SPRD || COMPILE_TEST 1146 depends on SPI_MASTER 1147 select MFD_CORE 1148 select REGMAP_SPI 1149 select REGMAP_IRQ 1150 help 1151 This enables support for the Spreadtrum SC27xx PMICs with SPI 1152 interface. The SC27xx series PMICs integrate power management, 1153 audio codec, battery management and user interface support 1154 function (such as RTC, Typec, indicator and so on) in a single chip. 1155 1156 This driver provides common support for accessing the SC27xx PMICs, 1157 and it also adds the irq_chip parts for handling the PMIC chip events. 1158 1159config ABX500_CORE 1160 bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions" 1161 default y if ARCH_U300 || ARCH_U8500 || COMPILE_TEST 1162 help 1163 Say yes here if you have the ABX500 Mixed Signal IC family 1164 chips. This core driver expose register access functions. 1165 Functionality specific drivers using these functions can 1166 remain unchanged when IC changes. Binding of the functions to 1167 actual register access is done by the IC core driver. 1168 1169config AB3100_CORE 1170 bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions" 1171 depends on I2C=y && ABX500_CORE 1172 select MFD_CORE 1173 default y if ARCH_U300 1174 help 1175 Select this to enable the AB3100 Mixed Signal IC core 1176 functionality. This connects to a AB3100 on the I2C bus 1177 and expose a number of symbols needed for dependent devices 1178 to read and write registers and subscribe to events from 1179 this multi-functional IC. This is needed to use other features 1180 of the AB3100 such as battery-backed RTC, charging control, 1181 LEDs, vibrator, system power and temperature, power management 1182 and ALSA sound. 1183 1184config AB3100_OTP 1185 tristate "ST-Ericsson AB3100 OTP functions" 1186 depends on AB3100_CORE 1187 default y if AB3100_CORE 1188 help 1189 Select this to enable the AB3100 Mixed Signal IC OTP (one-time 1190 programmable memory) support. This exposes a sysfs file to read 1191 out OTP values. 1192 1193config AB8500_CORE 1194 bool "ST-Ericsson AB8500 Mixed Signal Power Management chip" 1195 depends on ABX500_CORE && MFD_DB8500_PRCMU 1196 select POWER_SUPPLY 1197 select MFD_CORE 1198 select IRQ_DOMAIN 1199 help 1200 Select this option to enable access to AB8500 power management 1201 chip. This connects to U8500 either on the SSP/SPI bus (deprecated 1202 since hardware version v1.0) or the I2C bus via PRCMU. It also adds 1203 the irq_chip parts for handling the Mixed Signal chip events. 1204 This chip embeds various other multimedia funtionalities as well. 1205 1206config AB8500_DEBUG 1207 bool "Enable debug info via debugfs" 1208 depends on AB8500_GPADC && DEBUG_FS 1209 default y if DEBUG_FS 1210 help 1211 Select this option if you want debug information using the debug 1212 filesystem, debugfs. 1213 1214config MFD_DB8500_PRCMU 1215 bool "ST-Ericsson DB8500 Power Reset Control Management Unit" 1216 depends on UX500_SOC_DB8500 1217 select MFD_CORE 1218 help 1219 Select this option to enable support for the DB8500 Power Reset 1220 and Control Management Unit. This is basically an autonomous 1221 system controller running an XP70 microprocessor, which is accessed 1222 through a register map. 1223 1224config MFD_STMPE 1225 bool "STMicroelectronics STMPE" 1226 depends on (I2C=y || SPI_MASTER=y) 1227 depends on OF 1228 select MFD_CORE 1229 help 1230 Support for the STMPE family of I/O Expanders from 1231 STMicroelectronics. 1232 1233 Currently supported devices are: 1234 1235 STMPE811: GPIO, Touchscreen, ADC 1236 STMPE1601: GPIO, Keypad 1237 STMPE1801: GPIO, Keypad 1238 STMPE2401: GPIO, Keypad 1239 STMPE2403: GPIO, Keypad 1240 1241 This driver provides common support for accessing the device, 1242 additional drivers must be enabled in order to use the functionality 1243 of the device. Currently available sub drivers are: 1244 1245 GPIO: stmpe-gpio 1246 Keypad: stmpe-keypad 1247 Touchscreen: stmpe-ts 1248 ADC: stmpe-adc 1249 1250menu "STMicroelectronics STMPE Interface Drivers" 1251depends on MFD_STMPE 1252 1253config STMPE_I2C 1254 bool "STMicroelectronics STMPE I2C Interface" 1255 depends on I2C=y 1256 default y 1257 help 1258 This is used to enable I2C interface of STMPE 1259 1260config STMPE_SPI 1261 bool "STMicroelectronics STMPE SPI Interface" 1262 depends on SPI_MASTER 1263 help 1264 This is used to enable SPI interface of STMPE 1265endmenu 1266 1267config MFD_STA2X11 1268 bool "STMicroelectronics STA2X11" 1269 depends on STA2X11 1270 select MFD_CORE 1271 select REGMAP_MMIO 1272 1273config MFD_SUN6I_PRCM 1274 bool "Allwinner A31 PRCM controller" 1275 depends on ARCH_SUNXI || COMPILE_TEST 1276 select MFD_CORE 1277 help 1278 Support for the PRCM (Power/Reset/Clock Management) unit available 1279 in A31 SoC. 1280 1281config MFD_SYSCON 1282 bool "System Controller Register R/W Based on Regmap" 1283 select REGMAP_MMIO 1284 help 1285 Select this option to enable accessing system control registers 1286 via regmap. 1287 1288config MFD_DAVINCI_VOICECODEC 1289 tristate 1290 select MFD_CORE 1291 select REGMAP_MMIO 1292 1293config MFD_TI_AM335X_TSCADC 1294 tristate "TI ADC / Touch Screen chip support" 1295 select MFD_CORE 1296 select REGMAP 1297 select REGMAP_MMIO 1298 help 1299 If you say yes here you get support for Texas Instruments series 1300 of Touch Screen /ADC chips. 1301 To compile this driver as a module, choose M here: the 1302 module will be called ti_am335x_tscadc. 1303 1304config MFD_DM355EVM_MSP 1305 bool "TI DaVinci DM355 EVM microcontroller" 1306 depends on I2C=y && MACH_DAVINCI_DM355_EVM 1307 help 1308 This driver supports the MSP430 microcontroller used on these 1309 boards. MSP430 firmware manages resets and power sequencing, 1310 inputs from buttons and the IR remote, LEDs, an RTC, and more. 1311 1312config MFD_LP3943 1313 tristate "TI/National Semiconductor LP3943 MFD Driver" 1314 depends on I2C 1315 select MFD_CORE 1316 select REGMAP_I2C 1317 help 1318 Support for the TI/National Semiconductor LP3943. 1319 This driver consists of GPIO and PWM drivers. 1320 With these functionalities, it can be used for LED string control or 1321 general usage such like a GPIO controller and a PWM controller. 1322 1323config MFD_LP8788 1324 bool "TI LP8788 Power Management Unit Driver" 1325 depends on I2C=y 1326 select MFD_CORE 1327 select REGMAP_I2C 1328 select IRQ_DOMAIN 1329 help 1330 TI LP8788 PMU supports regulators, battery charger, RTC, 1331 ADC, backlight driver and current sinks. 1332 1333config MFD_TI_LMU 1334 tristate "TI Lighting Management Unit driver" 1335 depends on I2C 1336 select MFD_CORE 1337 select REGMAP_I2C 1338 help 1339 Say yes here to enable support for TI LMU chips. 1340 TI LMU MFD supports LM3532, LM3631, LM3632, LM3633, LM3695 and 1341 LM36274. It consists of backlight, LED and regulator driver. 1342 It provides consistent device controls for lighting functions. 1343 1344config MFD_OMAP_USB_HOST 1345 bool "TI OMAP USBHS core and TLL driver" 1346 depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3 1347 default y 1348 help 1349 This is the core driver for the OAMP EHCI and OHCI drivers. 1350 This MFD driver does the required setup functionalities for 1351 OMAP USB Host drivers. 1352 1353config MFD_PALMAS 1354 bool "TI Palmas series chips" 1355 select MFD_CORE 1356 select REGMAP_I2C 1357 select REGMAP_IRQ 1358 depends on I2C=y 1359 help 1360 If you say yes here you get support for the Palmas 1361 series of PMIC chips from Texas Instruments. 1362 1363config TPS6105X 1364 tristate "TI TPS61050/61052 Boost Converters" 1365 depends on I2C 1366 select REGMAP_I2C 1367 select REGULATOR 1368 select MFD_CORE 1369 select REGULATOR_FIXED_VOLTAGE 1370 help 1371 This option enables a driver for the TP61050/TPS61052 1372 high-power "white LED driver". This boost converter is 1373 sometimes used for other things than white LEDs, and 1374 also contains a GPIO pin. 1375 1376config TPS65010 1377 tristate "TI TPS6501x Power Management chips" 1378 depends on I2C && GPIOLIB 1379 default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK 1380 help 1381 If you say yes here you get support for the TPS6501x series of 1382 Power Management chips. These include voltage regulators, 1383 lithium ion/polymer battery charging, and other features that 1384 are often used in portable devices like cell phones and cameras. 1385 1386 This driver can also be built as a module. If so, the module 1387 will be called tps65010. 1388 1389config TPS6507X 1390 tristate "TI TPS6507x Power Management / Touch Screen chips" 1391 select MFD_CORE 1392 depends on I2C 1393 help 1394 If you say yes here you get support for the TPS6507x series of 1395 Power Management / Touch Screen chips. These include voltage 1396 regulators, lithium ion/polymer battery charging, touch screen 1397 and other features that are often used in portable devices. 1398 This driver can also be built as a module. If so, the module 1399 will be called tps6507x. 1400 1401config MFD_TPS65086 1402 tristate "TI TPS65086 Power Management Integrated Chips (PMICs)" 1403 select MFD_CORE 1404 select REGMAP 1405 select REGMAP_IRQ 1406 select REGMAP_I2C 1407 depends on I2C 1408 help 1409 If you say yes here you get support for the TPS65086 series of 1410 Power Management chips. 1411 This driver provides common support for accessing the device, 1412 additional drivers must be enabled in order to use the 1413 functionality of the device. 1414 1415config TPS65911_COMPARATOR 1416 tristate 1417 1418config MFD_TPS65090 1419 bool "TI TPS65090 Power Management chips" 1420 depends on I2C=y 1421 select MFD_CORE 1422 select REGMAP_I2C 1423 select REGMAP_IRQ 1424 help 1425 If you say yes here you get support for the TPS65090 series of 1426 Power Management chips. 1427 This driver provides common support for accessing the device, 1428 additional drivers must be enabled in order to use the 1429 functionality of the device. 1430 1431config MFD_TPS65217 1432 tristate "TI TPS65217 Power Management / White LED chips" 1433 depends on I2C && OF 1434 select MFD_CORE 1435 select REGMAP_I2C 1436 select IRQ_DOMAIN 1437 help 1438 If you say yes here you get support for the TPS65217 series of 1439 Power Management / White LED chips. 1440 These include voltage regulators, lithium ion/polymer battery 1441 charger, wled and other features that are often used in portable 1442 devices. 1443 1444 This driver can also be built as a module. If so, the module 1445 will be called tps65217. 1446 1447config MFD_TPS68470 1448 bool "TI TPS68470 Power Management / LED chips" 1449 depends on ACPI && PCI && I2C=y 1450 depends on I2C_DESIGNWARE_PLATFORM=y 1451 select MFD_CORE 1452 select REGMAP_I2C 1453 help 1454 If you say yes here you get support for the TPS68470 series of 1455 Power Management / LED chips. 1456 1457 These include voltage regulators, LEDs and other features 1458 that are often used in portable devices. 1459 1460 This option is a bool as it provides an ACPI operation 1461 region, which must be available before any of the devices 1462 using this are probed. This option also configures the 1463 designware-i2c driver to be built-in, for the same reason. 1464 1465config MFD_TI_LP873X 1466 tristate "TI LP873X Power Management IC" 1467 depends on I2C 1468 select MFD_CORE 1469 select REGMAP_I2C 1470 help 1471 If you say yes here then you get support for the LP873X series of 1472 Power Management Integrated Circuits (PMIC). 1473 These include voltage regulators, thermal protection, configurable 1474 General Purpose Outputs (GPO) that are used in portable devices. 1475 1476 This driver can also be built as a module. If so, the module 1477 will be called lp873x. 1478 1479config MFD_TI_LP87565 1480 tristate "TI LP87565 Power Management IC" 1481 depends on I2C && OF 1482 select MFD_CORE 1483 select REGMAP_I2C 1484 help 1485 If you say yes here then you get support for the LP87565 series of 1486 Power Management Integrated Circuits (PMIC). 1487 These include voltage regulators, thermal protection, configurable 1488 General Purpose Outputs (GPO) that are used in portable devices. 1489 1490 This driver can also be built as a module. If so, the module 1491 will be called lp87565. 1492 1493config MFD_TPS65218 1494 tristate "TI TPS65218 Power Management chips" 1495 depends on I2C && OF 1496 select MFD_CORE 1497 select REGMAP_I2C 1498 select REGMAP_IRQ 1499 help 1500 If you say yes here you get support for the TPS65218 series of 1501 Power Management chips. 1502 These include voltage regulators, gpio and other features 1503 that are often used in portable devices. 1504 1505 This driver can also be built as a module. If so, the module 1506 will be called tps65218. 1507 1508config MFD_TPS6586X 1509 bool "TI TPS6586x Power Management chips" 1510 depends on I2C=y 1511 select MFD_CORE 1512 select REGMAP_I2C 1513 help 1514 If you say yes here you get support for the TPS6586X series of 1515 Power Management chips. 1516 This driver provides common support for accessing the device, 1517 additional drivers must be enabled in order to use the 1518 functionality of the device. 1519 1520 This driver can also be built as a module. If so, the module 1521 will be called tps6586x. 1522 1523config MFD_TPS65910 1524 bool "TI TPS65910 Power Management chip" 1525 depends on I2C=y 1526 depends on GPIOLIB || COMPILE_TEST 1527 select MFD_CORE 1528 select REGMAP_I2C 1529 select REGMAP_IRQ 1530 select IRQ_DOMAIN 1531 help 1532 if you say yes here you get support for the TPS65910 series of 1533 Power Management chips. 1534 1535config MFD_TPS65912 1536 tristate 1537 select MFD_CORE 1538 select REGMAP 1539 select REGMAP_IRQ 1540 1541config MFD_TPS65912_I2C 1542 tristate "TI TPS65912 Power Management chip with I2C" 1543 select MFD_TPS65912 1544 select REGMAP_I2C 1545 depends on I2C 1546 help 1547 If you say yes here you get support for the TPS65912 series of 1548 PM chips with I2C interface. 1549 1550config MFD_TPS65912_SPI 1551 tristate "TI TPS65912 Power Management chip with SPI" 1552 select MFD_TPS65912 1553 select REGMAP_SPI 1554 depends on SPI_MASTER 1555 help 1556 If you say yes here you get support for the TPS65912 series of 1557 PM chips with SPI interface. 1558 1559config MFD_TPS80031 1560 bool "TI TPS80031/TPS80032 Power Management chips" 1561 depends on I2C=y 1562 select MFD_CORE 1563 select REGMAP_I2C 1564 select REGMAP_IRQ 1565 help 1566 If you say yes here you get support for the Texas Instruments 1567 TPS80031/ TPS80032 Fully Integrated Power Management with Power 1568 Path and Battery Charger. The device provides five configurable 1569 step-down converters, 11 general purpose LDOs, USB OTG Module, 1570 ADC, RTC, 2 PWM, System Voltage Regulator/Battery Charger with 1571 Power Path from USB, 32K clock generator. 1572 1573config TWL4030_CORE 1574 bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 Support" 1575 depends on I2C=y 1576 select IRQ_DOMAIN 1577 select REGMAP_I2C 1578 help 1579 Say yes here if you have TWL4030 / TWL6030 family chip on your board. 1580 This core driver provides register access and IRQ handling 1581 facilities, and registers devices for the various functions 1582 so that function-specific drivers can bind to them. 1583 1584 These multi-function chips are found on many OMAP2 and OMAP3 1585 boards, providing power management, RTC, GPIO, keypad, a 1586 high speed USB OTG transceiver, an audio codec (on most 1587 versions) and many other features. 1588 1589config TWL4030_POWER 1590 bool "TI TWL4030 power resources" 1591 depends on TWL4030_CORE && ARM 1592 help 1593 Say yes here if you want to use the power resources on the 1594 TWL4030 family chips. Most of these resources are regulators, 1595 which have a separate driver; some are control signals, such 1596 as clock request handshaking. 1597 1598 This driver uses board-specific data to initialize the resources 1599 and load scripts controlling which resources are switched off/on 1600 or reset when a sleep, wakeup or warm reset event occurs. 1601 1602config MFD_TWL4030_AUDIO 1603 bool "TI TWL4030 Audio" 1604 depends on TWL4030_CORE 1605 select MFD_CORE 1606 default n 1607 1608config TWL6040_CORE 1609 bool "TI TWL6040 audio codec" 1610 depends on I2C=y 1611 select MFD_CORE 1612 select REGMAP_I2C 1613 select REGMAP_IRQ 1614 default n 1615 help 1616 Say yes here if you want support for Texas Instruments TWL6040 audio 1617 codec. 1618 This driver provides common support for accessing the device, 1619 additional drivers must be enabled in order to use the 1620 functionality of the device (audio, vibra). 1621 1622config MENELAUS 1623 bool "TI TWL92330/Menelaus PM chip" 1624 depends on I2C=y && ARCH_OMAP2 1625 help 1626 If you say yes here you get support for the Texas Instruments 1627 TWL92330/Menelaus Power Management chip. This include voltage 1628 regulators, Dual slot memory card transceivers, real-time clock 1629 and other features that are often used in portable devices like 1630 cell phones and PDAs. 1631 1632config MFD_WL1273_CORE 1633 tristate "TI WL1273 FM radio" 1634 depends on I2C 1635 select MFD_CORE 1636 default n 1637 help 1638 This is the core driver for the TI WL1273 FM radio. This MFD 1639 driver connects the radio-wl1273 V4L2 module and the wl1273 1640 audio codec. 1641 1642config MFD_LM3533 1643 tristate "TI/National Semiconductor LM3533 Lighting Power chip" 1644 depends on I2C 1645 select MFD_CORE 1646 select REGMAP_I2C 1647 help 1648 Say yes here to enable support for National Semiconductor / TI 1649 LM3533 Lighting Power chips. 1650 1651 This driver provides common support for accessing the device; 1652 additional drivers must be enabled in order to use the LED, 1653 backlight or ambient-light-sensor functionality of the device. 1654 1655config MFD_TIMBERDALE 1656 tristate "Timberdale FPGA" 1657 select MFD_CORE 1658 depends on PCI && GPIOLIB && (X86_32 || COMPILE_TEST) 1659 ---help--- 1660 This is the core driver for the timberdale FPGA. This device is a 1661 multifunction device which exposes numerous platform devices. 1662 1663 The timberdale FPGA can be found on the Intel Atom development board 1664 for in-vehicle infontainment, called Russellville. 1665 1666config MFD_TC3589X 1667 bool "Toshiba TC35892 and variants" 1668 depends on I2C=y 1669 depends on OF 1670 select MFD_CORE 1671 help 1672 Support for the Toshiba TC35892 and variants I/O Expander. 1673 1674 This driver provides common support for accessing the device, 1675 additional drivers must be enabled in order to use the 1676 functionality of the device. 1677 1678config MFD_TMIO 1679 bool 1680 default n 1681 1682config MFD_T7L66XB 1683 bool "Toshiba T7L66XB" 1684 depends on ARM && HAVE_CLK 1685 select MFD_CORE 1686 select MFD_TMIO 1687 help 1688 Support for Toshiba Mobile IO Controller T7L66XB 1689 1690config MFD_TC6387XB 1691 bool "Toshiba TC6387XB" 1692 depends on ARM && HAVE_CLK 1693 select MFD_CORE 1694 select MFD_TMIO 1695 help 1696 Support for Toshiba Mobile IO Controller TC6387XB 1697 1698config MFD_TC6393XB 1699 bool "Toshiba TC6393XB" 1700 depends on ARM && HAVE_CLK 1701 select GPIOLIB 1702 select MFD_CORE 1703 select MFD_TMIO 1704 help 1705 Support for Toshiba Mobile IO Controller TC6393XB 1706 1707config MFD_TQMX86 1708 tristate "TQ-Systems IO controller TQMX86" 1709 select MFD_CORE 1710 help 1711 Say yes here to enable support for various functions of the 1712 TQ-Systems IO controller and watchdog device, found on their 1713 ComExpress CPU modules. 1714 1715config MFD_VX855 1716 tristate "VIA VX855/VX875 integrated south bridge" 1717 depends on PCI 1718 select MFD_CORE 1719 help 1720 Say yes here to enable support for various functions of the 1721 VIA VX855/VX875 south bridge. You will need to enable the vx855_spi 1722 and/or vx855_gpio drivers for this to do anything useful. 1723 1724config MFD_LOCHNAGAR 1725 bool "Cirrus Logic Lochnagar Audio Development Board" 1726 select MFD_CORE 1727 select REGMAP_I2C 1728 depends on I2C=y && OF 1729 help 1730 Support for Cirrus Logic Lochnagar audio development board. 1731 1732config MFD_ARIZONA 1733 select REGMAP 1734 select REGMAP_IRQ 1735 select MFD_CORE 1736 bool 1737 1738config MFD_ARIZONA_I2C 1739 tristate "Cirrus Logic/Wolfson Microelectronics Arizona platform with I2C" 1740 select MFD_ARIZONA 1741 select REGMAP_I2C 1742 depends on I2C 1743 help 1744 Support for the Cirrus Logic/Wolfson Microelectronics Arizona platform 1745 audio SoC core functionality controlled via I2C. 1746 1747config MFD_ARIZONA_SPI 1748 tristate "Cirrus Logic/Wolfson Microelectronics Arizona platform with SPI" 1749 select MFD_ARIZONA 1750 select REGMAP_SPI 1751 depends on SPI_MASTER 1752 help 1753 Support for the Cirrus Logic/Wolfson Microelectronics Arizona platform 1754 audio SoC core functionality controlled via SPI. 1755 1756config MFD_CS47L24 1757 bool "Cirrus Logic CS47L24 and WM1831" 1758 depends on MFD_ARIZONA 1759 help 1760 Support for Cirrus Logic CS47L24 and WM1831 low power audio SoC 1761 1762config MFD_WM5102 1763 bool "Wolfson Microelectronics WM5102" 1764 depends on MFD_ARIZONA 1765 help 1766 Support for Wolfson Microelectronics WM5102 low power audio SoC 1767 1768config MFD_WM5110 1769 bool "Wolfson Microelectronics WM5110 and WM8280/WM8281" 1770 depends on MFD_ARIZONA 1771 help 1772 Support for Wolfson Microelectronics WM5110 and WM8280/WM8281 1773 low power audio SoC 1774 1775config MFD_WM8997 1776 bool "Wolfson Microelectronics WM8997" 1777 depends on MFD_ARIZONA 1778 help 1779 Support for Wolfson Microelectronics WM8997 low power audio SoC 1780 1781config MFD_WM8998 1782 bool "Wolfson Microelectronics WM8998" 1783 depends on MFD_ARIZONA 1784 help 1785 Support for Wolfson Microelectronics WM8998 low power audio SoC 1786 1787config MFD_WM8400 1788 bool "Wolfson Microelectronics WM8400" 1789 select MFD_CORE 1790 depends on I2C=y 1791 select REGMAP_I2C 1792 help 1793 Support for the Wolfson Microelecronics WM8400 PMIC and audio 1794 CODEC. This driver provides common support for accessing 1795 the device, additional drivers must be enabled in order to use 1796 the functionality of the device. 1797 1798config MFD_WM831X 1799 bool 1800 1801config MFD_WM831X_I2C 1802 bool "Wolfson Microelectronics WM831x/2x PMICs with I2C" 1803 select MFD_CORE 1804 select MFD_WM831X 1805 select REGMAP_I2C 1806 select IRQ_DOMAIN 1807 depends on I2C=y 1808 help 1809 Support for the Wolfson Microelecronics WM831x and WM832x PMICs 1810 when controlled using I2C. This driver provides common support 1811 for accessing the device, additional drivers must be enabled in 1812 order to use the functionality of the device. 1813 1814config MFD_WM831X_SPI 1815 bool "Wolfson Microelectronics WM831x/2x PMICs with SPI" 1816 select MFD_CORE 1817 select MFD_WM831X 1818 select REGMAP_SPI 1819 select IRQ_DOMAIN 1820 depends on SPI_MASTER 1821 help 1822 Support for the Wolfson Microelecronics WM831x and WM832x PMICs 1823 when controlled using SPI. This driver provides common support 1824 for accessing the device, additional drivers must be enabled in 1825 order to use the functionality of the device. 1826 1827config MFD_WM8350 1828 bool 1829 1830config MFD_WM8350_I2C 1831 bool "Wolfson Microelectronics WM8350 with I2C" 1832 select MFD_WM8350 1833 select REGMAP_I2C 1834 depends on I2C=y 1835 help 1836 The WM8350 is an integrated audio and power management 1837 subsystem with watchdog and RTC functionality for embedded 1838 systems. This option enables core support for the WM8350 with 1839 I2C as the control interface. Additional options must be 1840 selected to enable support for the functionality of the chip. 1841 1842config MFD_WM8994 1843 tristate "Wolfson Microelectronics WM8994" 1844 select MFD_CORE 1845 select REGMAP_I2C 1846 select REGMAP_IRQ 1847 depends on I2C 1848 help 1849 The WM8994 is a highly integrated hi-fi CODEC designed for 1850 smartphone applications. As well as audio functionality it 1851 has on board GPIO and regulator functionality which is 1852 supported via the relevant subsystems. This driver provides 1853 core support for the WM8994, in order to use the actual 1854 functionaltiy of the device other drivers must be enabled. 1855 1856config MFD_WM97xx 1857 tristate "Wolfson Microelectronics WM97xx" 1858 select MFD_CORE 1859 select REGMAP_AC97 1860 select AC97_BUS_COMPAT 1861 depends on AC97_BUS_NEW 1862 help 1863 The WM9705, WM9712 and WM9713 is a highly integrated hi-fi CODEC 1864 designed for smartphone applications. As well as audio functionality 1865 it has on board GPIO and a touchscreen functionality which is 1866 supported via the relevant subsystems. This driver provides core 1867 support for the WM97xx, in order to use the actual functionaltiy of 1868 the device other drivers must be enabled. 1869 1870config MFD_STW481X 1871 tristate "Support for ST Microelectronics STw481x" 1872 depends on I2C && (ARCH_NOMADIK || COMPILE_TEST) 1873 select REGMAP_I2C 1874 select MFD_CORE 1875 help 1876 Select this option to enable the STw481x chip driver used 1877 in various ST Microelectronics and ST-Ericsson embedded 1878 Nomadik series. 1879 1880config MFD_ROHM_BD718XX 1881 tristate "ROHM BD71837 Power Management IC" 1882 depends on I2C=y 1883 depends on OF 1884 select REGMAP_I2C 1885 select REGMAP_IRQ 1886 select MFD_CORE 1887 help 1888 Select this option to get support for the ROHM BD71837 1889 Power Management ICs. BD71837 is designed to power processors like 1890 NXP i.MX8. It contains 8 BUCK outputs and 7 LDOs, voltage monitoring 1891 and emergency shut down as well as 32,768KHz clock output. 1892 1893config MFD_ROHM_BD70528 1894 tristate "ROHM BD70528 Power Management IC" 1895 depends on I2C=y 1896 depends on OF 1897 select REGMAP_I2C 1898 select REGMAP_IRQ 1899 select MFD_CORE 1900 help 1901 Select this option to get support for the ROHM BD70528 Power 1902 Management IC. BD71837 is general purpose single-chip power 1903 management IC for battery-powered portable devices. It contains 1904 3 ultra-low current consumption buck converters, 3 LDOs and 2 LED 1905 drivers. Also included are 4 GPIOs, a real-time clock (RTC), a 32kHz 1906 crystal oscillator, high-accuracy VREF for use with an external ADC, 1907 10 bits SAR ADC for battery temperature monitor and 1S battery 1908 charger. 1909 1910config MFD_ROHM_BD71828 1911 tristate "ROHM BD71828 Power Management IC" 1912 depends on I2C=y 1913 depends on OF 1914 select REGMAP_I2C 1915 select REGMAP_IRQ 1916 select MFD_CORE 1917 help 1918 Select this option to get support for the ROHM BD71828 Power 1919 Management IC. BD71828GW is a single-chip power management IC for 1920 battery-powered portable devices. The IC integrates 7 buck 1921 converters, 7 LDOs, and a 1500 mA single-cell linear charger. 1922 Also included is a Coulomb counter, a real-time clock (RTC), and 1923 a 32.768 kHz clock gate. 1924 1925config MFD_STM32_LPTIMER 1926 tristate "Support for STM32 Low-Power Timer" 1927 depends on (ARCH_STM32 && OF) || COMPILE_TEST 1928 select MFD_CORE 1929 select REGMAP 1930 select REGMAP_MMIO 1931 help 1932 Select this option to enable STM32 Low-Power Timer driver 1933 used for PWM, IIO Trigger, IIO Encoder and Counter. Shared 1934 resources are also dealt with here. 1935 1936 To compile this driver as a module, choose M here: the 1937 module will be called stm32-lptimer. 1938 1939config MFD_STM32_TIMERS 1940 tristate "Support for STM32 Timers" 1941 depends on (ARCH_STM32 && OF) || COMPILE_TEST 1942 select MFD_CORE 1943 select REGMAP 1944 select REGMAP_MMIO 1945 help 1946 Select this option to enable STM32 timers driver used 1947 for PWM and IIO Timer. This driver allow to share the 1948 registers between the others drivers. 1949 1950config MFD_STPMIC1 1951 tristate "Support for STPMIC1 PMIC" 1952 depends on (I2C=y && OF) 1953 select REGMAP_I2C 1954 select REGMAP_IRQ 1955 select MFD_CORE 1956 help 1957 Support for ST Microelectronics STPMIC1 PMIC. STPMIC1 has power on 1958 key, watchdog and regulator functionalities which are supported via 1959 the relevant subsystems. This driver provides core support for the 1960 STPMIC1. In order to use the actual functionaltiy of the device other 1961 drivers must be enabled. 1962 1963 To compile this driver as a module, choose M here: the 1964 module will be called stpmic1. 1965 1966config MFD_STMFX 1967 tristate "Support for STMicroelectronics Multi-Function eXpander (STMFX)" 1968 depends on I2C 1969 depends on OF || COMPILE_TEST 1970 select MFD_CORE 1971 select REGMAP_I2C 1972 help 1973 Support for the STMicroelectronics Multi-Function eXpander. 1974 1975 This driver provides common support for accessing the device, 1976 additional drivers must be enabled in order to use the functionality 1977 of the device. 1978 1979config MFD_WCD934X 1980 tristate "Support for WCD9340/WCD9341 Codec" 1981 depends on SLIMBUS 1982 select REGMAP 1983 select REGMAP_SLIMBUS 1984 select REGMAP_IRQ 1985 select MFD_CORE 1986 help 1987 Support for the Qualcomm WCD9340/WCD9341 Codec. 1988 This driver provides common support WCD934x audio codec and its 1989 associated Pin Controller, Soundwire Controller and Audio codec. 1990 1991menu "Multimedia Capabilities Port drivers" 1992 depends on ARCH_SA1100 1993 1994config MCP 1995 tristate 1996 1997# Interface drivers 1998config MCP_SA11X0 1999 tristate "Support SA11x0 MCP interface" 2000 depends on ARCH_SA1100 2001 select MCP 2002 2003# Chip drivers 2004config MCP_UCB1200 2005 tristate "Support for UCB1200 / UCB1300" 2006 depends on MCP_SA11X0 2007 select MCP 2008 2009config MCP_UCB1200_TS 2010 tristate "Touchscreen interface support" 2011 depends on MCP_UCB1200 && INPUT 2012 2013endmenu 2014 2015config MFD_VEXPRESS_SYSREG 2016 bool "Versatile Express System Registers" 2017 depends on VEXPRESS_CONFIG && GPIOLIB && !ARCH_USES_GETTIMEOFFSET 2018 default y 2019 select CLKSRC_MMIO 2020 select GPIO_GENERIC_PLATFORM 2021 select MFD_CORE 2022 select MFD_SYSCON 2023 help 2024 System Registers are the platform configuration block 2025 on the ARM Ltd. Versatile Express board. 2026 2027config RAVE_SP_CORE 2028 tristate "RAVE SP MCU core driver" 2029 depends on SERIAL_DEV_BUS 2030 select CRC_CCITT 2031 help 2032 Select this to get support for the Supervisory Processor 2033 device found on several devices in RAVE line of hardware. 2034 2035config SGI_MFD_IOC3 2036 tristate "SGI IOC3 core driver" 2037 depends on PCI && MIPS && 64BIT 2038 select MFD_CORE 2039 help 2040 This option enables basic support for the SGI IOC3-based 2041 controller cards. This option does not enable any specific 2042 functions on such a card, but provides necessary infrastructure 2043 for other drivers to utilize. 2044 2045 If you have an SGI Origin, Octane, or a PCI IOC3 card, 2046 then say Y. Otherwise say N. 2047 2048endmenu 2049endif 2050