xref: /openbmc/linux/drivers/message/fusion/mptspi.c (revision 4f3db074)
1 /*
2  *  linux/drivers/message/fusion/mptspi.c
3  *      For use with LSI PCI chip/adapter(s)
4  *      running LSI Fusion MPT (Message Passing Technology) firmware.
5  *
6  *  Copyright (c) 1999-2008 LSI Corporation
7  *  (mailto:DL-MPTFusionLinux@lsi.com)
8  *
9  */
10 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
11 /*
12     This program is free software; you can redistribute it and/or modify
13     it under the terms of the GNU General Public License as published by
14     the Free Software Foundation; version 2 of the License.
15 
16     This program is distributed in the hope that it will be useful,
17     but WITHOUT ANY WARRANTY; without even the implied warranty of
18     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19     GNU General Public License for more details.
20 
21     NO WARRANTY
22     THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
23     CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
24     LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
25     MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
26     solely responsible for determining the appropriateness of using and
27     distributing the Program and assumes all risks associated with its
28     exercise of rights under this Agreement, including but not limited to
29     the risks and costs of program errors, damage to or loss of data,
30     programs or equipment, and unavailability or interruption of operations.
31 
32     DISCLAIMER OF LIABILITY
33     NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
34     DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
35     DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
36     ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
37     TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
38     USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
39     HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
40 
41     You should have received a copy of the GNU General Public License
42     along with this program; if not, write to the Free Software
43     Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
44 */
45 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
46 
47 #include <linux/module.h>
48 #include <linux/kernel.h>
49 #include <linux/slab.h>
50 #include <linux/init.h>
51 #include <linux/errno.h>
52 #include <linux/kdev_t.h>
53 #include <linux/blkdev.h>
54 #include <linux/delay.h>	/* for mdelay */
55 #include <linux/interrupt.h>	/* needed for in_interrupt() proto */
56 #include <linux/reboot.h>	/* notifier code */
57 #include <linux/workqueue.h>
58 #include <linux/raid_class.h>
59 
60 #include <scsi/scsi.h>
61 #include <scsi/scsi_cmnd.h>
62 #include <scsi/scsi_device.h>
63 #include <scsi/scsi_host.h>
64 #include <scsi/scsi_tcq.h>
65 #include <scsi/scsi_transport.h>
66 #include <scsi/scsi_transport_spi.h>
67 #include <scsi/scsi_dbg.h>
68 
69 #include "mptbase.h"
70 #include "mptscsih.h"
71 
72 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
73 #define my_NAME		"Fusion MPT SPI Host driver"
74 #define my_VERSION	MPT_LINUX_VERSION_COMMON
75 #define MYNAM		"mptspi"
76 
77 MODULE_AUTHOR(MODULEAUTHOR);
78 MODULE_DESCRIPTION(my_NAME);
79 MODULE_LICENSE("GPL");
80 MODULE_VERSION(my_VERSION);
81 
82 /* Command line args */
83 static int mpt_saf_te = MPTSCSIH_SAF_TE;
84 module_param(mpt_saf_te, int, 0);
85 MODULE_PARM_DESC(mpt_saf_te, " Force enabling SEP Processor: enable=1  (default=MPTSCSIH_SAF_TE=0)");
86 
87 static void mptspi_write_offset(struct scsi_target *, int);
88 static void mptspi_write_width(struct scsi_target *, int);
89 static int mptspi_write_spi_device_pg1(struct scsi_target *,
90 				       struct _CONFIG_PAGE_SCSI_DEVICE_1 *);
91 
92 static struct scsi_transport_template *mptspi_transport_template = NULL;
93 
94 static u8	mptspiDoneCtx = MPT_MAX_PROTOCOL_DRIVERS;
95 static u8	mptspiTaskCtx = MPT_MAX_PROTOCOL_DRIVERS;
96 static u8	mptspiInternalCtx = MPT_MAX_PROTOCOL_DRIVERS; /* Used only for internal commands */
97 
98 /**
99  * 	mptspi_setTargetNegoParms  - Update the target negotiation parameters
100  *	@hd: Pointer to a SCSI Host Structure
101  *	@target: per target private data
102  *	@sdev: SCSI device
103  *
104  * 	Update the target negotiation parameters based on the the Inquiry
105  *	data, adapter capabilities, and NVRAM settings.
106  **/
107 static void
108 mptspi_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *target,
109 			    struct scsi_device *sdev)
110 {
111 	MPT_ADAPTER *ioc = hd->ioc;
112 	SpiCfgData *pspi_data = &ioc->spi_data;
113 	int  id = (int) target->id;
114 	int  nvram;
115 	u8 width = MPT_NARROW;
116 	u8 factor = MPT_ASYNC;
117 	u8 offset = 0;
118 	u8 nfactor;
119 	u8 noQas = 1;
120 
121 	target->negoFlags = pspi_data->noQas;
122 
123 	if (sdev->scsi_level < SCSI_2) {
124 		width = 0;
125 		factor = MPT_ULTRA2;
126 		offset = pspi_data->maxSyncOffset;
127 		target->tflags &= ~MPT_TARGET_FLAGS_Q_YES;
128 	} else {
129 		if (scsi_device_wide(sdev))
130 			width = 1;
131 
132 		if (scsi_device_sync(sdev)) {
133 			factor = pspi_data->minSyncFactor;
134 			if (!scsi_device_dt(sdev))
135 					factor = MPT_ULTRA2;
136 			else {
137 				if (!scsi_device_ius(sdev) &&
138 				    !scsi_device_qas(sdev))
139 					factor = MPT_ULTRA160;
140 				else {
141 					factor = MPT_ULTRA320;
142 					if (scsi_device_qas(sdev)) {
143 						ddvprintk(ioc,
144 						printk(MYIOC_s_DEBUG_FMT "Enabling QAS due to "
145 						"byte56=%02x on id=%d!\n", ioc->name,
146 						scsi_device_qas(sdev), id));
147 						noQas = 0;
148 					}
149 					if (sdev->type == TYPE_TAPE &&
150 					    scsi_device_ius(sdev))
151 						target->negoFlags |= MPT_TAPE_NEGO_IDP;
152 				}
153 			}
154 			offset = pspi_data->maxSyncOffset;
155 
156 			/* If RAID, never disable QAS
157 			 * else if non RAID, do not disable
158 			 *   QAS if bit 1 is set
159 			 * bit 1 QAS support, non-raid only
160 			 * bit 0 IU support
161 			 */
162 			if (target->raidVolume == 1)
163 				noQas = 0;
164 		} else {
165 			factor = MPT_ASYNC;
166 			offset = 0;
167 		}
168 	}
169 
170 	if (!sdev->tagged_supported)
171 		target->tflags &= ~MPT_TARGET_FLAGS_Q_YES;
172 
173 	/* Update tflags based on NVRAM settings. (SCSI only)
174 	 */
175 	if (pspi_data->nvram && (pspi_data->nvram[id] != MPT_HOST_NVRAM_INVALID)) {
176 		nvram = pspi_data->nvram[id];
177 		nfactor = (nvram & MPT_NVRAM_SYNC_MASK) >> 8;
178 
179 		if (width)
180 			width = nvram & MPT_NVRAM_WIDE_DISABLE ? 0 : 1;
181 
182 		if (offset > 0) {
183 			/* Ensure factor is set to the
184 			 * maximum of: adapter, nvram, inquiry
185 			 */
186 			if (nfactor) {
187 				if (nfactor < pspi_data->minSyncFactor )
188 					nfactor = pspi_data->minSyncFactor;
189 
190 				factor = max(factor, nfactor);
191 				if (factor == MPT_ASYNC)
192 					offset = 0;
193 			} else {
194 				offset = 0;
195 				factor = MPT_ASYNC;
196 		}
197 		} else {
198 			factor = MPT_ASYNC;
199 		}
200 	}
201 
202 	/* Make sure data is consistent
203 	 */
204 	if ((!width) && (factor < MPT_ULTRA2))
205 		factor = MPT_ULTRA2;
206 
207 	/* Save the data to the target structure.
208 	 */
209 	target->minSyncFactor = factor;
210 	target->maxOffset = offset;
211 	target->maxWidth = width;
212 
213 	spi_min_period(scsi_target(sdev)) = factor;
214 	spi_max_offset(scsi_target(sdev)) = offset;
215 	spi_max_width(scsi_target(sdev)) = width;
216 
217 	target->tflags |= MPT_TARGET_FLAGS_VALID_NEGO;
218 
219 	/* Disable unused features.
220 	 */
221 	if (!width)
222 		target->negoFlags |= MPT_TARGET_NO_NEGO_WIDE;
223 
224 	if (!offset)
225 		target->negoFlags |= MPT_TARGET_NO_NEGO_SYNC;
226 
227 	if ( factor > MPT_ULTRA320 )
228 		noQas = 0;
229 
230 	if (noQas && (pspi_data->noQas == 0)) {
231 		pspi_data->noQas |= MPT_TARGET_NO_NEGO_QAS;
232 		target->negoFlags |= MPT_TARGET_NO_NEGO_QAS;
233 
234 		/* Disable QAS in a mixed configuration case
235 		 */
236 
237 		ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
238 			"Disabling QAS due to noQas=%02x on id=%d!\n", ioc->name, noQas, id));
239 	}
240 }
241 
242 /**
243  * 	mptspi_writeIOCPage4  - write IOC Page 4
244  *	@hd: Pointer to a SCSI Host Structure
245  *	@channel: channel number
246  *	@id: write IOC Page4 for this ID & Bus
247  *
248  *	Return: -EAGAIN if unable to obtain a Message Frame
249  *		or 0 if success.
250  *
251  *	Remark: We do not wait for a return, write pages sequentially.
252  **/
253 static int
254 mptspi_writeIOCPage4(MPT_SCSI_HOST *hd, u8 channel , u8 id)
255 {
256 	MPT_ADAPTER		*ioc = hd->ioc;
257 	Config_t		*pReq;
258 	IOCPage4_t		*IOCPage4Ptr;
259 	MPT_FRAME_HDR		*mf;
260 	dma_addr_t		 dataDma;
261 	u16			 req_idx;
262 	u32			 frameOffset;
263 	u32			 flagsLength;
264 	int			 ii;
265 
266 	/* Get a MF for this command.
267 	 */
268 	if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) {
269 		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT
270 				"writeIOCPage4 : no msg frames!\n",ioc->name));
271 		return -EAGAIN;
272 	}
273 
274 	/* Set the request and the data pointers.
275 	 * Place data at end of MF.
276 	 */
277 	pReq = (Config_t *)mf;
278 
279 	req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
280 	frameOffset = ioc->req_sz - sizeof(IOCPage4_t);
281 
282 	/* Complete the request frame (same for all requests).
283 	 */
284 	pReq->Action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
285 	pReq->Reserved = 0;
286 	pReq->ChainOffset = 0;
287 	pReq->Function = MPI_FUNCTION_CONFIG;
288 	pReq->ExtPageLength = 0;
289 	pReq->ExtPageType = 0;
290 	pReq->MsgFlags = 0;
291 	for (ii=0; ii < 8; ii++) {
292 		pReq->Reserved2[ii] = 0;
293 	}
294 
295 	IOCPage4Ptr = ioc->spi_data.pIocPg4;
296 	dataDma = ioc->spi_data.IocPg4_dma;
297 	ii = IOCPage4Ptr->ActiveSEP++;
298 	IOCPage4Ptr->SEP[ii].SEPTargetID = id;
299 	IOCPage4Ptr->SEP[ii].SEPBus = channel;
300 	pReq->Header = IOCPage4Ptr->Header;
301 	pReq->PageAddress = cpu_to_le32(id | (channel << 8 ));
302 
303 	/* Add a SGE to the config request.
304 	 */
305 	flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE |
306 		(IOCPage4Ptr->Header.PageLength + ii) * 4;
307 
308 	ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, dataDma);
309 
310 	ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
311 		"writeIOCPage4: MaxSEP=%d ActiveSEP=%d id=%d bus=%d\n",
312 		ioc->name, IOCPage4Ptr->MaxSEP, IOCPage4Ptr->ActiveSEP, id, channel));
313 
314 	mpt_put_msg_frame(ioc->DoneCtx, ioc, mf);
315 
316 	return 0;
317 }
318 
319 /**
320  *	mptspi_initTarget - Target, LUN alloc/free functionality.
321  *	@hd: Pointer to MPT_SCSI_HOST structure
322  *	@vtarget: per target private data
323  *	@sdev: SCSI device
324  *
325  *	NOTE: It's only SAFE to call this routine if data points to
326  *	sane & valid STANDARD INQUIRY data!
327  *
328  *	Allocate and initialize memory for this target.
329  *	Save inquiry data.
330  *
331  **/
332 static void
333 mptspi_initTarget(MPT_SCSI_HOST *hd, VirtTarget *vtarget,
334 		    struct scsi_device *sdev)
335 {
336 
337 	/* Is LUN supported? If so, upper 2 bits will be 0
338 	* in first byte of inquiry data.
339 	*/
340 	if (sdev->inq_periph_qual != 0)
341 		return;
342 
343 	if (vtarget == NULL)
344 		return;
345 
346 	vtarget->type = sdev->type;
347 
348 	if ((sdev->type == TYPE_PROCESSOR) && (hd->ioc->spi_data.Saf_Te)) {
349 		/* Treat all Processors as SAF-TE if
350 		 * command line option is set */
351 		vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED;
352 		mptspi_writeIOCPage4(hd, vtarget->channel, vtarget->id);
353 	}else if ((sdev->type == TYPE_PROCESSOR) &&
354 		!(vtarget->tflags & MPT_TARGET_FLAGS_SAF_TE_ISSUED )) {
355 		if (sdev->inquiry_len > 49 ) {
356 			if (sdev->inquiry[44] == 'S' &&
357 			    sdev->inquiry[45] == 'A' &&
358 			    sdev->inquiry[46] == 'F' &&
359 			    sdev->inquiry[47] == '-' &&
360 			    sdev->inquiry[48] == 'T' &&
361 			    sdev->inquiry[49] == 'E' ) {
362 				vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED;
363 				mptspi_writeIOCPage4(hd, vtarget->channel, vtarget->id);
364 			}
365 		}
366 	}
367 	mptspi_setTargetNegoParms(hd, vtarget, sdev);
368 }
369 
370 /**
371  *	mptspi_is_raid - Determines whether target is belonging to volume
372  *	@hd: Pointer to a SCSI HOST structure
373  *	@id: target device id
374  *
375  *	Return:
376  *		non-zero = true
377  *		zero = false
378  *
379  */
380 static int
381 mptspi_is_raid(struct _MPT_SCSI_HOST *hd, u32 id)
382 {
383 	int i, rc = 0;
384 	MPT_ADAPTER *ioc = hd->ioc;
385 
386 	if (!ioc->raid_data.pIocPg2)
387 		goto out;
388 
389 	if (!ioc->raid_data.pIocPg2->NumActiveVolumes)
390 		goto out;
391 	for (i=0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) {
392 		if (ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID == id) {
393 			rc = 1;
394 			goto out;
395 		}
396 	}
397 
398  out:
399 	return rc;
400 }
401 
402 static int mptspi_target_alloc(struct scsi_target *starget)
403 {
404 	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
405 	struct _MPT_SCSI_HOST *hd = shost_priv(shost);
406 	VirtTarget		*vtarget;
407 	MPT_ADAPTER *ioc;
408 
409 	if (hd == NULL)
410 		return -ENODEV;
411 
412 	ioc = hd->ioc;
413 	vtarget = kzalloc(sizeof(VirtTarget), GFP_KERNEL);
414 	if (!vtarget)
415 		return -ENOMEM;
416 
417 	vtarget->ioc_id = ioc->id;
418 	vtarget->tflags = MPT_TARGET_FLAGS_Q_YES;
419 	vtarget->id = (u8)starget->id;
420 	vtarget->channel = (u8)starget->channel;
421 	vtarget->starget = starget;
422 	starget->hostdata = vtarget;
423 
424 	if (starget->channel == 1) {
425 		if (mptscsih_is_phys_disk(ioc, 0, starget->id) == 0)
426 			return 0;
427 		vtarget->tflags |= MPT_TARGET_FLAGS_RAID_COMPONENT;
428 		/* The real channel for this device is zero */
429 		vtarget->channel = 0;
430 		/* The actual physdisknum (for RAID passthrough) */
431 		vtarget->id = mptscsih_raid_id_to_num(ioc, 0,
432 		    starget->id);
433 	}
434 
435 	if (starget->channel == 0 &&
436 	    mptspi_is_raid(hd, starget->id)) {
437 		vtarget->raidVolume = 1;
438 		ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
439 		    "RAID Volume @ channel=%d id=%d\n", ioc->name, starget->channel,
440 		    starget->id));
441 	}
442 
443 	if (ioc->spi_data.nvram &&
444 	    ioc->spi_data.nvram[starget->id] != MPT_HOST_NVRAM_INVALID) {
445 		u32 nvram = ioc->spi_data.nvram[starget->id];
446 		spi_min_period(starget) = (nvram & MPT_NVRAM_SYNC_MASK) >> MPT_NVRAM_SYNC_SHIFT;
447 		spi_max_width(starget) = nvram & MPT_NVRAM_WIDE_DISABLE ? 0 : 1;
448 	} else {
449 		spi_min_period(starget) = ioc->spi_data.minSyncFactor;
450 		spi_max_width(starget) = ioc->spi_data.maxBusWidth;
451 	}
452 	spi_max_offset(starget) = ioc->spi_data.maxSyncOffset;
453 
454 	spi_offset(starget) = 0;
455 	spi_period(starget) = 0xFF;
456 	mptspi_write_width(starget, 0);
457 
458 	return 0;
459 }
460 
461 static void
462 mptspi_target_destroy(struct scsi_target *starget)
463 {
464 	kfree(starget->hostdata);
465 	starget->hostdata = NULL;
466 }
467 
468 /**
469  *	mptspi_print_write_nego - negotiation parameters debug info that is being sent
470  *	@hd: Pointer to a SCSI HOST structure
471  *	@starget: SCSI target
472  *	@ii: negotiation parameters
473  *
474  */
475 static void
476 mptspi_print_write_nego(struct _MPT_SCSI_HOST *hd, struct scsi_target *starget, u32 ii)
477 {
478 	ddvprintk(hd->ioc, printk(MYIOC_s_DEBUG_FMT "id=%d Requested = 0x%08x"
479 	    " ( %s factor = 0x%02x @ offset = 0x%02x %s%s%s%s%s%s%s%s)\n",
480 	    hd->ioc->name, starget->id, ii,
481 	    ii & MPI_SCSIDEVPAGE0_NP_WIDE ? "Wide ": "",
482 	    ((ii >> 8) & 0xFF), ((ii >> 16) & 0xFF),
483 	    ii & MPI_SCSIDEVPAGE0_NP_IU ? "IU ": "",
484 	    ii & MPI_SCSIDEVPAGE0_NP_DT ? "DT ": "",
485 	    ii & MPI_SCSIDEVPAGE0_NP_QAS ? "QAS ": "",
486 	    ii & MPI_SCSIDEVPAGE0_NP_HOLD_MCS ? "HOLDMCS ": "",
487 	    ii & MPI_SCSIDEVPAGE0_NP_WR_FLOW ? "WRFLOW ": "",
488 	    ii & MPI_SCSIDEVPAGE0_NP_RD_STRM ? "RDSTRM ": "",
489 	    ii & MPI_SCSIDEVPAGE0_NP_RTI ? "RTI ": "",
490 	    ii & MPI_SCSIDEVPAGE0_NP_PCOMP_EN ? "PCOMP ": ""));
491 }
492 
493 /**
494  *	mptspi_print_read_nego - negotiation parameters debug info that is being read
495  *	@hd: Pointer to a SCSI HOST structure
496  *	@starget: SCSI target
497  *	@ii: negotiation parameters
498  *
499  */
500 static void
501 mptspi_print_read_nego(struct _MPT_SCSI_HOST *hd, struct scsi_target *starget, u32 ii)
502 {
503 	ddvprintk(hd->ioc, printk(MYIOC_s_DEBUG_FMT "id=%d Read = 0x%08x"
504 	    " ( %s factor = 0x%02x @ offset = 0x%02x %s%s%s%s%s%s%s%s)\n",
505 	    hd->ioc->name, starget->id, ii,
506 	    ii & MPI_SCSIDEVPAGE0_NP_WIDE ? "Wide ": "",
507 	    ((ii >> 8) & 0xFF), ((ii >> 16) & 0xFF),
508 	    ii & MPI_SCSIDEVPAGE0_NP_IU ? "IU ": "",
509 	    ii & MPI_SCSIDEVPAGE0_NP_DT ? "DT ": "",
510 	    ii & MPI_SCSIDEVPAGE0_NP_QAS ? "QAS ": "",
511 	    ii & MPI_SCSIDEVPAGE0_NP_HOLD_MCS ? "HOLDMCS ": "",
512 	    ii & MPI_SCSIDEVPAGE0_NP_WR_FLOW ? "WRFLOW ": "",
513 	    ii & MPI_SCSIDEVPAGE0_NP_RD_STRM ? "RDSTRM ": "",
514 	    ii & MPI_SCSIDEVPAGE0_NP_RTI ? "RTI ": "",
515 	    ii & MPI_SCSIDEVPAGE0_NP_PCOMP_EN ? "PCOMP ": ""));
516 }
517 
518 static int mptspi_read_spi_device_pg0(struct scsi_target *starget,
519 			     struct _CONFIG_PAGE_SCSI_DEVICE_0 *pass_pg0)
520 {
521 	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
522 	struct _MPT_SCSI_HOST *hd = shost_priv(shost);
523 	struct _MPT_ADAPTER *ioc = hd->ioc;
524 	struct _CONFIG_PAGE_SCSI_DEVICE_0 *spi_dev_pg0;
525 	dma_addr_t spi_dev_pg0_dma;
526 	int size;
527 	struct _x_config_parms cfg;
528 	struct _CONFIG_PAGE_HEADER hdr;
529 	int err = -EBUSY;
530 
531 	/* No SPI parameters for RAID devices */
532 	if (starget->channel == 0 &&
533 	    mptspi_is_raid(hd, starget->id))
534 		return -1;
535 
536 	size = ioc->spi_data.sdp0length * 4;
537 	/*
538 	if (ioc->spi_data.sdp0length & 1)
539 		size += size + 4;
540 	size += 2048;
541 	*/
542 
543 	spi_dev_pg0 = dma_alloc_coherent(&ioc->pcidev->dev, size, &spi_dev_pg0_dma, GFP_KERNEL);
544 	if (spi_dev_pg0 == NULL) {
545 		starget_printk(KERN_ERR, starget, MYIOC_s_FMT
546 		    "dma_alloc_coherent for parameters failed\n", ioc->name);
547 		return -EINVAL;
548 	}
549 
550 	memset(&hdr, 0, sizeof(hdr));
551 
552 	hdr.PageVersion = ioc->spi_data.sdp0version;
553 	hdr.PageLength = ioc->spi_data.sdp0length;
554 	hdr.PageNumber = 0;
555 	hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
556 
557 	memset(&cfg, 0, sizeof(cfg));
558 
559 	cfg.cfghdr.hdr = &hdr;
560 	cfg.physAddr = spi_dev_pg0_dma;
561 	cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
562 	cfg.dir = 0;
563 	cfg.pageAddr = starget->id;
564 	cfg.timeout = 60;
565 
566 	if (mpt_config(ioc, &cfg)) {
567 		starget_printk(KERN_ERR, starget, MYIOC_s_FMT "mpt_config failed\n", ioc->name);
568 		goto out_free;
569 	}
570 	err = 0;
571 	memcpy(pass_pg0, spi_dev_pg0, size);
572 
573 	mptspi_print_read_nego(hd, starget, le32_to_cpu(spi_dev_pg0->NegotiatedParameters));
574 
575  out_free:
576 	dma_free_coherent(&ioc->pcidev->dev, size, spi_dev_pg0, spi_dev_pg0_dma);
577 	return err;
578 }
579 
580 static u32 mptspi_getRP(struct scsi_target *starget)
581 {
582 	u32 nego = 0;
583 
584 	nego |= spi_iu(starget) ? MPI_SCSIDEVPAGE1_RP_IU : 0;
585 	nego |= spi_dt(starget) ? MPI_SCSIDEVPAGE1_RP_DT : 0;
586 	nego |= spi_qas(starget) ? MPI_SCSIDEVPAGE1_RP_QAS : 0;
587 	nego |= spi_hold_mcs(starget) ? MPI_SCSIDEVPAGE1_RP_HOLD_MCS : 0;
588 	nego |= spi_wr_flow(starget) ? MPI_SCSIDEVPAGE1_RP_WR_FLOW : 0;
589 	nego |= spi_rd_strm(starget) ? MPI_SCSIDEVPAGE1_RP_RD_STRM : 0;
590 	nego |= spi_rti(starget) ? MPI_SCSIDEVPAGE1_RP_RTI : 0;
591 	nego |= spi_pcomp_en(starget) ? MPI_SCSIDEVPAGE1_RP_PCOMP_EN : 0;
592 
593 	nego |= (spi_period(starget) <<  MPI_SCSIDEVPAGE1_RP_SHIFT_MIN_SYNC_PERIOD) & MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK;
594 	nego |= (spi_offset(starget) << MPI_SCSIDEVPAGE1_RP_SHIFT_MAX_SYNC_OFFSET) & MPI_SCSIDEVPAGE1_RP_MAX_SYNC_OFFSET_MASK;
595 	nego |= spi_width(starget) ?  MPI_SCSIDEVPAGE1_RP_WIDE : 0;
596 
597 	return nego;
598 }
599 
600 static void mptspi_read_parameters(struct scsi_target *starget)
601 {
602 	int nego;
603 	struct _CONFIG_PAGE_SCSI_DEVICE_0 spi_dev_pg0;
604 
605 	mptspi_read_spi_device_pg0(starget, &spi_dev_pg0);
606 
607 	nego = le32_to_cpu(spi_dev_pg0.NegotiatedParameters);
608 
609 	spi_iu(starget) = (nego & MPI_SCSIDEVPAGE0_NP_IU) ? 1 : 0;
610 	spi_dt(starget) = (nego & MPI_SCSIDEVPAGE0_NP_DT) ? 1 : 0;
611 	spi_qas(starget) = (nego & MPI_SCSIDEVPAGE0_NP_QAS) ? 1 : 0;
612 	spi_wr_flow(starget) = (nego & MPI_SCSIDEVPAGE0_NP_WR_FLOW) ? 1 : 0;
613 	spi_rd_strm(starget) = (nego & MPI_SCSIDEVPAGE0_NP_RD_STRM) ? 1 : 0;
614 	spi_rti(starget) = (nego & MPI_SCSIDEVPAGE0_NP_RTI) ? 1 : 0;
615 	spi_pcomp_en(starget) = (nego & MPI_SCSIDEVPAGE0_NP_PCOMP_EN) ? 1 : 0;
616 	spi_hold_mcs(starget) = (nego & MPI_SCSIDEVPAGE0_NP_HOLD_MCS) ? 1 : 0;
617 	spi_period(starget) = (nego & MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK) >> MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_PERIOD;
618 	spi_offset(starget) = (nego & MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK) >> MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_OFFSET;
619 	spi_width(starget) = (nego & MPI_SCSIDEVPAGE0_NP_WIDE) ? 1 : 0;
620 }
621 
622 static int
623 mptscsih_quiesce_raid(MPT_SCSI_HOST *hd, int quiesce, u8 channel, u8 id)
624 {
625 	MPT_ADAPTER	*ioc = hd->ioc;
626 	MpiRaidActionRequest_t	*pReq;
627 	MPT_FRAME_HDR		*mf;
628 	int			ret;
629 	unsigned long 	 	timeleft;
630 
631 	mutex_lock(&ioc->internal_cmds.mutex);
632 
633 	/* Get and Populate a free Frame
634 	 */
635 	if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) {
636 		dfailprintk(hd->ioc, printk(MYIOC_s_WARN_FMT
637 			"%s: no msg frames!\n", ioc->name, __func__));
638 		ret = -EAGAIN;
639 		goto out;
640 	}
641 	pReq = (MpiRaidActionRequest_t *)mf;
642 	if (quiesce)
643 		pReq->Action = MPI_RAID_ACTION_QUIESCE_PHYS_IO;
644 	else
645 		pReq->Action = MPI_RAID_ACTION_ENABLE_PHYS_IO;
646 	pReq->Reserved1 = 0;
647 	pReq->ChainOffset = 0;
648 	pReq->Function = MPI_FUNCTION_RAID_ACTION;
649 	pReq->VolumeID = id;
650 	pReq->VolumeBus = channel;
651 	pReq->PhysDiskNum = 0;
652 	pReq->MsgFlags = 0;
653 	pReq->Reserved2 = 0;
654 	pReq->ActionDataWord = 0; /* Reserved for this action */
655 
656 	ioc->add_sge((char *)&pReq->ActionDataSGE,
657 		MPT_SGE_FLAGS_SSIMPLE_READ | 0, (dma_addr_t) -1);
658 
659 	ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RAID Volume action=%x channel=%d id=%d\n",
660 			ioc->name, pReq->Action, channel, id));
661 
662 	INITIALIZE_MGMT_STATUS(ioc->internal_cmds.status)
663 	mpt_put_msg_frame(ioc->InternalCtx, ioc, mf);
664 	timeleft = wait_for_completion_timeout(&ioc->internal_cmds.done, 10*HZ);
665 	if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
666 		ret = -ETIME;
667 		dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: TIMED OUT!\n",
668 		    ioc->name, __func__));
669 		if (ioc->internal_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
670 			goto out;
671 		if (!timeleft) {
672 			printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n",
673 			    ioc->name, __func__);
674 			mpt_HardResetHandler(ioc, CAN_SLEEP);
675 			mpt_free_msg_frame(ioc, mf);
676 		}
677 		goto out;
678 	}
679 
680 	ret = ioc->internal_cmds.completion_code;
681 
682  out:
683 	CLEAR_MGMT_STATUS(ioc->internal_cmds.status)
684 	mutex_unlock(&ioc->internal_cmds.mutex);
685 	return ret;
686 }
687 
688 static void mptspi_dv_device(struct _MPT_SCSI_HOST *hd,
689 			     struct scsi_device *sdev)
690 {
691 	VirtTarget *vtarget = scsi_target(sdev)->hostdata;
692 	MPT_ADAPTER *ioc = hd->ioc;
693 
694 	/* no DV on RAID devices */
695 	if (sdev->channel == 0 &&
696 	    mptspi_is_raid(hd, sdev->id))
697 		return;
698 
699 	/* If this is a piece of a RAID, then quiesce first */
700 	if (sdev->channel == 1 &&
701 	    mptscsih_quiesce_raid(hd, 1, vtarget->channel, vtarget->id) < 0) {
702 		starget_printk(KERN_ERR, scsi_target(sdev), MYIOC_s_FMT
703 		    "Integrated RAID quiesce failed\n", ioc->name);
704 		return;
705 	}
706 
707 	hd->spi_pending |= (1 << sdev->id);
708 	spi_dv_device(sdev);
709 	hd->spi_pending &= ~(1 << sdev->id);
710 
711 	if (sdev->channel == 1 &&
712 	    mptscsih_quiesce_raid(hd, 0, vtarget->channel, vtarget->id) < 0)
713 		starget_printk(KERN_ERR, scsi_target(sdev), MYIOC_s_FMT
714 		    "Integrated RAID resume failed\n", ioc->name);
715 
716 	mptspi_read_parameters(sdev->sdev_target);
717 	spi_display_xfer_agreement(sdev->sdev_target);
718 	mptspi_read_parameters(sdev->sdev_target);
719 }
720 
721 static int mptspi_slave_alloc(struct scsi_device *sdev)
722 {
723 	MPT_SCSI_HOST *hd = shost_priv(sdev->host);
724 	VirtTarget		*vtarget;
725 	VirtDevice		*vdevice;
726 	struct scsi_target 	*starget;
727 	MPT_ADAPTER *ioc = hd->ioc;
728 
729 	if (sdev->channel == 1 &&
730 		mptscsih_is_phys_disk(ioc, 0, sdev->id) == 0)
731 			return -ENXIO;
732 
733 	vdevice = kzalloc(sizeof(VirtDevice), GFP_KERNEL);
734 	if (!vdevice) {
735 		printk(MYIOC_s_ERR_FMT "slave_alloc kmalloc(%zd) FAILED!\n",
736 				ioc->name, sizeof(VirtDevice));
737 		return -ENOMEM;
738 	}
739 
740 	vdevice->lun = sdev->lun;
741 	sdev->hostdata = vdevice;
742 
743 	starget = scsi_target(sdev);
744 	vtarget = starget->hostdata;
745 	vdevice->vtarget = vtarget;
746 	vtarget->num_luns++;
747 
748 	if (sdev->channel == 1)
749 		sdev->no_uld_attach = 1;
750 
751 	return 0;
752 }
753 
754 static int mptspi_slave_configure(struct scsi_device *sdev)
755 {
756 	struct _MPT_SCSI_HOST *hd = shost_priv(sdev->host);
757 	VirtTarget *vtarget = scsi_target(sdev)->hostdata;
758 	int ret;
759 
760 	mptspi_initTarget(hd, vtarget, sdev);
761 
762 	ret = mptscsih_slave_configure(sdev);
763 
764 	if (ret)
765 		return ret;
766 
767 	ddvprintk(hd->ioc, printk(MYIOC_s_DEBUG_FMT "id=%d min_period=0x%02x"
768 		" max_offset=0x%02x max_width=%d\n", hd->ioc->name,
769 		sdev->id, spi_min_period(scsi_target(sdev)),
770 		spi_max_offset(scsi_target(sdev)),
771 		spi_max_width(scsi_target(sdev))));
772 
773 	if ((sdev->channel == 1 ||
774 	     !(mptspi_is_raid(hd, sdev->id))) &&
775 	    !spi_initial_dv(sdev->sdev_target))
776 		mptspi_dv_device(hd, sdev);
777 
778 	return 0;
779 }
780 
781 static int
782 mptspi_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *SCpnt)
783 {
784 	struct _MPT_SCSI_HOST *hd = shost_priv(shost);
785 	VirtDevice	*vdevice = SCpnt->device->hostdata;
786 	MPT_ADAPTER *ioc = hd->ioc;
787 
788 	if (!vdevice || !vdevice->vtarget) {
789 		SCpnt->result = DID_NO_CONNECT << 16;
790 		SCpnt->scsi_done(SCpnt);
791 		return 0;
792 	}
793 
794 	if (SCpnt->device->channel == 1 &&
795 		mptscsih_is_phys_disk(ioc, 0, SCpnt->device->id) == 0) {
796 		SCpnt->result = DID_NO_CONNECT << 16;
797 		SCpnt->scsi_done(SCpnt);
798 		return 0;
799 	}
800 
801 	if (spi_dv_pending(scsi_target(SCpnt->device)))
802 		ddvprintk(ioc, scsi_print_command(SCpnt));
803 
804 	return mptscsih_qcmd(SCpnt);
805 }
806 
807 static void mptspi_slave_destroy(struct scsi_device *sdev)
808 {
809 	struct scsi_target *starget = scsi_target(sdev);
810 	VirtTarget *vtarget = starget->hostdata;
811 	VirtDevice *vdevice = sdev->hostdata;
812 
813 	/* Will this be the last lun on a non-raid device? */
814 	if (vtarget->num_luns == 1 && vdevice->configured_lun) {
815 		struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
816 
817 		/* Async Narrow */
818 		pg1.RequestedParameters = 0;
819 		pg1.Reserved = 0;
820 		pg1.Configuration = 0;
821 
822 		mptspi_write_spi_device_pg1(starget, &pg1);
823 	}
824 
825 	mptscsih_slave_destroy(sdev);
826 }
827 
828 static struct scsi_host_template mptspi_driver_template = {
829 	.module				= THIS_MODULE,
830 	.proc_name			= "mptspi",
831 	.show_info			= mptscsih_show_info,
832 	.name				= "MPT SPI Host",
833 	.info				= mptscsih_info,
834 	.queuecommand			= mptspi_qcmd,
835 	.target_alloc			= mptspi_target_alloc,
836 	.slave_alloc			= mptspi_slave_alloc,
837 	.slave_configure		= mptspi_slave_configure,
838 	.target_destroy			= mptspi_target_destroy,
839 	.slave_destroy			= mptspi_slave_destroy,
840 	.change_queue_depth 		= mptscsih_change_queue_depth,
841 	.eh_abort_handler		= mptscsih_abort,
842 	.eh_device_reset_handler	= mptscsih_dev_reset,
843 	.eh_bus_reset_handler		= mptscsih_bus_reset,
844 	.eh_host_reset_handler		= mptscsih_host_reset,
845 	.bios_param			= mptscsih_bios_param,
846 	.can_queue			= MPT_SCSI_CAN_QUEUE,
847 	.this_id			= -1,
848 	.sg_tablesize			= MPT_SCSI_SG_DEPTH,
849 	.max_sectors			= 8192,
850 	.cmd_per_lun			= 7,
851 	.use_clustering			= ENABLE_CLUSTERING,
852 	.shost_attrs			= mptscsih_host_attrs,
853 };
854 
855 static int mptspi_write_spi_device_pg1(struct scsi_target *starget,
856 			       struct _CONFIG_PAGE_SCSI_DEVICE_1 *pass_pg1)
857 {
858 	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
859 	struct _MPT_SCSI_HOST *hd = shost_priv(shost);
860 	struct _MPT_ADAPTER *ioc = hd->ioc;
861 	struct _CONFIG_PAGE_SCSI_DEVICE_1 *pg1;
862 	dma_addr_t pg1_dma;
863 	int size;
864 	struct _x_config_parms cfg;
865 	struct _CONFIG_PAGE_HEADER hdr;
866 	int err = -EBUSY;
867 	u32 nego_parms;
868 	u32 period;
869 	struct scsi_device *sdev;
870 	int i;
871 
872 	/* don't allow updating nego parameters on RAID devices */
873 	if (starget->channel == 0 &&
874 	    mptspi_is_raid(hd, starget->id))
875 		return -1;
876 
877 	size = ioc->spi_data.sdp1length * 4;
878 
879 	pg1 = dma_alloc_coherent(&ioc->pcidev->dev, size, &pg1_dma, GFP_KERNEL);
880 	if (pg1 == NULL) {
881 		starget_printk(KERN_ERR, starget, MYIOC_s_FMT
882 		    "dma_alloc_coherent for parameters failed\n", ioc->name);
883 		return -EINVAL;
884 	}
885 
886 	memset(&hdr, 0, sizeof(hdr));
887 
888 	hdr.PageVersion = ioc->spi_data.sdp1version;
889 	hdr.PageLength = ioc->spi_data.sdp1length;
890 	hdr.PageNumber = 1;
891 	hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
892 
893 	memset(&cfg, 0, sizeof(cfg));
894 
895 	cfg.cfghdr.hdr = &hdr;
896 	cfg.physAddr = pg1_dma;
897 	cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
898 	cfg.dir = 1;
899 	cfg.pageAddr = starget->id;
900 
901 	memcpy(pg1, pass_pg1, size);
902 
903 	pg1->Header.PageVersion = hdr.PageVersion;
904 	pg1->Header.PageLength = hdr.PageLength;
905 	pg1->Header.PageNumber = hdr.PageNumber;
906 	pg1->Header.PageType = hdr.PageType;
907 
908 	nego_parms = le32_to_cpu(pg1->RequestedParameters);
909 	period = (nego_parms & MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK) >>
910 		MPI_SCSIDEVPAGE1_RP_SHIFT_MIN_SYNC_PERIOD;
911 	if (period == 8) {
912 		/* Turn on inline data padding for TAPE when running U320 */
913 		for (i = 0 ; i < 16; i++) {
914 			sdev = scsi_device_lookup_by_target(starget, i);
915 			if (sdev && sdev->type == TYPE_TAPE) {
916 				sdev_printk(KERN_DEBUG, sdev, MYIOC_s_FMT
917 					    "IDP:ON\n", ioc->name);
918 				nego_parms |= MPI_SCSIDEVPAGE1_RP_IDP;
919 				pg1->RequestedParameters =
920 				    cpu_to_le32(nego_parms);
921 				break;
922 			}
923 		}
924 	}
925 
926 	mptspi_print_write_nego(hd, starget, le32_to_cpu(pg1->RequestedParameters));
927 
928 	if (mpt_config(ioc, &cfg)) {
929 		starget_printk(KERN_ERR, starget, MYIOC_s_FMT
930 		    "mpt_config failed\n", ioc->name);
931 		goto out_free;
932 	}
933 	err = 0;
934 
935  out_free:
936 	dma_free_coherent(&ioc->pcidev->dev, size, pg1, pg1_dma);
937 	return err;
938 }
939 
940 static void mptspi_write_offset(struct scsi_target *starget, int offset)
941 {
942 	struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
943 	u32 nego;
944 
945 	if (offset < 0)
946 		offset = 0;
947 
948 	if (offset > 255)
949 		offset = 255;
950 
951 	if (spi_offset(starget) == -1)
952 		mptspi_read_parameters(starget);
953 
954 	spi_offset(starget) = offset;
955 
956 	nego = mptspi_getRP(starget);
957 
958 	pg1.RequestedParameters = cpu_to_le32(nego);
959 	pg1.Reserved = 0;
960 	pg1.Configuration = 0;
961 
962 	mptspi_write_spi_device_pg1(starget, &pg1);
963 }
964 
965 static void mptspi_write_period(struct scsi_target *starget, int period)
966 {
967 	struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
968 	u32 nego;
969 
970 	if (period < 8)
971 		period = 8;
972 
973 	if (period > 255)
974 		period = 255;
975 
976 	if (spi_period(starget) == -1)
977 		mptspi_read_parameters(starget);
978 
979 	if (period == 8) {
980 		spi_iu(starget) = 1;
981 		spi_dt(starget) = 1;
982 	} else if (period == 9) {
983 		spi_dt(starget) = 1;
984 	}
985 
986 	spi_period(starget) = period;
987 
988 	nego = mptspi_getRP(starget);
989 
990 	pg1.RequestedParameters = cpu_to_le32(nego);
991 	pg1.Reserved = 0;
992 	pg1.Configuration = 0;
993 
994 	mptspi_write_spi_device_pg1(starget, &pg1);
995 }
996 
997 static void mptspi_write_dt(struct scsi_target *starget, int dt)
998 {
999 	struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
1000 	u32 nego;
1001 
1002 	if (spi_period(starget) == -1)
1003 		mptspi_read_parameters(starget);
1004 
1005 	if (!dt && spi_period(starget) < 10)
1006 		spi_period(starget) = 10;
1007 
1008 	spi_dt(starget) = dt;
1009 
1010 	nego = mptspi_getRP(starget);
1011 
1012 
1013 	pg1.RequestedParameters = cpu_to_le32(nego);
1014 	pg1.Reserved = 0;
1015 	pg1.Configuration = 0;
1016 
1017 	mptspi_write_spi_device_pg1(starget, &pg1);
1018 }
1019 
1020 static void mptspi_write_iu(struct scsi_target *starget, int iu)
1021 {
1022 	struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
1023 	u32 nego;
1024 
1025 	if (spi_period(starget) == -1)
1026 		mptspi_read_parameters(starget);
1027 
1028 	if (!iu && spi_period(starget) < 9)
1029 		spi_period(starget) = 9;
1030 
1031 	spi_iu(starget) = iu;
1032 
1033 	nego = mptspi_getRP(starget);
1034 
1035 	pg1.RequestedParameters = cpu_to_le32(nego);
1036 	pg1.Reserved = 0;
1037 	pg1.Configuration = 0;
1038 
1039 	mptspi_write_spi_device_pg1(starget, &pg1);
1040 }
1041 
1042 #define MPTSPI_SIMPLE_TRANSPORT_PARM(parm) 				\
1043 static void mptspi_write_##parm(struct scsi_target *starget, int parm)\
1044 {									\
1045 	struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;				\
1046 	u32 nego;							\
1047 									\
1048 	spi_##parm(starget) = parm;					\
1049 									\
1050 	nego = mptspi_getRP(starget);					\
1051 									\
1052 	pg1.RequestedParameters = cpu_to_le32(nego);			\
1053 	pg1.Reserved = 0;						\
1054 	pg1.Configuration = 0;						\
1055 									\
1056 	mptspi_write_spi_device_pg1(starget, &pg1);				\
1057 }
1058 
1059 MPTSPI_SIMPLE_TRANSPORT_PARM(rd_strm)
1060 MPTSPI_SIMPLE_TRANSPORT_PARM(wr_flow)
1061 MPTSPI_SIMPLE_TRANSPORT_PARM(rti)
1062 MPTSPI_SIMPLE_TRANSPORT_PARM(hold_mcs)
1063 MPTSPI_SIMPLE_TRANSPORT_PARM(pcomp_en)
1064 
1065 static void mptspi_write_qas(struct scsi_target *starget, int qas)
1066 {
1067 	struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
1068 	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
1069 	struct _MPT_SCSI_HOST *hd = shost_priv(shost);
1070 	VirtTarget *vtarget = starget->hostdata;
1071 	u32 nego;
1072 
1073 	if ((vtarget->negoFlags & MPT_TARGET_NO_NEGO_QAS) ||
1074 	    hd->ioc->spi_data.noQas)
1075 		spi_qas(starget) = 0;
1076 	else
1077 		spi_qas(starget) = qas;
1078 
1079 	nego = mptspi_getRP(starget);
1080 
1081 	pg1.RequestedParameters = cpu_to_le32(nego);
1082 	pg1.Reserved = 0;
1083 	pg1.Configuration = 0;
1084 
1085 	mptspi_write_spi_device_pg1(starget, &pg1);
1086 }
1087 
1088 static void mptspi_write_width(struct scsi_target *starget, int width)
1089 {
1090 	struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
1091 	u32 nego;
1092 
1093 	if (!width) {
1094 		spi_dt(starget) = 0;
1095 		if (spi_period(starget) < 10)
1096 			spi_period(starget) = 10;
1097 	}
1098 
1099 	spi_width(starget) = width;
1100 
1101 	nego = mptspi_getRP(starget);
1102 
1103 	pg1.RequestedParameters = cpu_to_le32(nego);
1104 	pg1.Reserved = 0;
1105 	pg1.Configuration = 0;
1106 
1107 	mptspi_write_spi_device_pg1(starget, &pg1);
1108 }
1109 
1110 struct work_queue_wrapper {
1111 	struct work_struct	work;
1112 	struct _MPT_SCSI_HOST	*hd;
1113 	int			disk;
1114 };
1115 
1116 static void mpt_work_wrapper(struct work_struct *work)
1117 {
1118 	struct work_queue_wrapper *wqw =
1119 		container_of(work, struct work_queue_wrapper, work);
1120 	struct _MPT_SCSI_HOST *hd = wqw->hd;
1121 	MPT_ADAPTER *ioc = hd->ioc;
1122 	struct Scsi_Host *shost = ioc->sh;
1123 	struct scsi_device *sdev;
1124 	int disk = wqw->disk;
1125 	struct _CONFIG_PAGE_IOC_3 *pg3;
1126 
1127 	kfree(wqw);
1128 
1129 	mpt_findImVolumes(ioc);
1130 	pg3 = ioc->raid_data.pIocPg3;
1131 	if (!pg3)
1132 		return;
1133 
1134 	shost_for_each_device(sdev,shost) {
1135 		struct scsi_target *starget = scsi_target(sdev);
1136 		VirtTarget *vtarget = starget->hostdata;
1137 
1138 		/* only want to search RAID components */
1139 		if (sdev->channel != 1)
1140 			continue;
1141 
1142 		/* The id is the raid PhysDiskNum, even if
1143 		 * starget->id is the actual target address */
1144 		if(vtarget->id != disk)
1145 			continue;
1146 
1147 		starget_printk(KERN_INFO, vtarget->starget, MYIOC_s_FMT
1148 		    "Integrated RAID requests DV of new device\n", ioc->name);
1149 		mptspi_dv_device(hd, sdev);
1150 	}
1151 	shost_printk(KERN_INFO, shost, MYIOC_s_FMT
1152 	    "Integrated RAID detects new device %d\n", ioc->name, disk);
1153 	scsi_scan_target(&ioc->sh->shost_gendev, 1, disk, 0, 1);
1154 }
1155 
1156 
1157 static void mpt_dv_raid(struct _MPT_SCSI_HOST *hd, int disk)
1158 {
1159 	struct work_queue_wrapper *wqw = kmalloc(sizeof(*wqw), GFP_ATOMIC);
1160 	MPT_ADAPTER *ioc = hd->ioc;
1161 
1162 	if (!wqw) {
1163 		shost_printk(KERN_ERR, ioc->sh, MYIOC_s_FMT
1164 		    "Failed to act on RAID event for physical disk %d\n",
1165 		    ioc->name, disk);
1166 		return;
1167 	}
1168 	INIT_WORK(&wqw->work, mpt_work_wrapper);
1169 	wqw->hd = hd;
1170 	wqw->disk = disk;
1171 
1172 	schedule_work(&wqw->work);
1173 }
1174 
1175 static int
1176 mptspi_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
1177 {
1178 	u8 event = le32_to_cpu(pEvReply->Event) & 0xFF;
1179 	struct _MPT_SCSI_HOST *hd = shost_priv(ioc->sh);
1180 
1181 	if (ioc->bus_type != SPI)
1182 		return 0;
1183 
1184 	if (hd && event ==  MPI_EVENT_INTEGRATED_RAID) {
1185 		int reason
1186 			= (le32_to_cpu(pEvReply->Data[0]) & 0x00FF0000) >> 16;
1187 
1188 		if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) {
1189 			int disk = (le32_to_cpu(pEvReply->Data[0]) & 0xFF000000) >> 24;
1190 			mpt_dv_raid(hd, disk);
1191 		}
1192 	}
1193 	return mptscsih_event_process(ioc, pEvReply);
1194 }
1195 
1196 static int
1197 mptspi_deny_binding(struct scsi_target *starget)
1198 {
1199 	struct _MPT_SCSI_HOST *hd =
1200 		(struct _MPT_SCSI_HOST *)dev_to_shost(starget->dev.parent)->hostdata;
1201 	return ((mptspi_is_raid(hd, starget->id)) &&
1202 		starget->channel == 0) ? 1 : 0;
1203 }
1204 
1205 static struct spi_function_template mptspi_transport_functions = {
1206 	.get_offset	= mptspi_read_parameters,
1207 	.set_offset	= mptspi_write_offset,
1208 	.show_offset	= 1,
1209 	.get_period	= mptspi_read_parameters,
1210 	.set_period	= mptspi_write_period,
1211 	.show_period	= 1,
1212 	.get_width	= mptspi_read_parameters,
1213 	.set_width	= mptspi_write_width,
1214 	.show_width	= 1,
1215 	.get_iu		= mptspi_read_parameters,
1216 	.set_iu		= mptspi_write_iu,
1217 	.show_iu	= 1,
1218 	.get_dt		= mptspi_read_parameters,
1219 	.set_dt		= mptspi_write_dt,
1220 	.show_dt	= 1,
1221 	.get_qas	= mptspi_read_parameters,
1222 	.set_qas	= mptspi_write_qas,
1223 	.show_qas	= 1,
1224 	.get_wr_flow	= mptspi_read_parameters,
1225 	.set_wr_flow	= mptspi_write_wr_flow,
1226 	.show_wr_flow	= 1,
1227 	.get_rd_strm	= mptspi_read_parameters,
1228 	.set_rd_strm	= mptspi_write_rd_strm,
1229 	.show_rd_strm	= 1,
1230 	.get_rti	= mptspi_read_parameters,
1231 	.set_rti	= mptspi_write_rti,
1232 	.show_rti	= 1,
1233 	.get_pcomp_en	= mptspi_read_parameters,
1234 	.set_pcomp_en	= mptspi_write_pcomp_en,
1235 	.show_pcomp_en	= 1,
1236 	.get_hold_mcs	= mptspi_read_parameters,
1237 	.set_hold_mcs	= mptspi_write_hold_mcs,
1238 	.show_hold_mcs	= 1,
1239 	.deny_binding	= mptspi_deny_binding,
1240 };
1241 
1242 /****************************************************************************
1243  * Supported hardware
1244  */
1245 
1246 static struct pci_device_id mptspi_pci_table[] = {
1247 	{ PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_53C1030,
1248 		PCI_ANY_ID, PCI_ANY_ID },
1249 	{ PCI_VENDOR_ID_ATTO, MPI_MANUFACTPAGE_DEVID_53C1030,
1250 		PCI_ANY_ID, PCI_ANY_ID },
1251 	{ PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_53C1035,
1252 		PCI_ANY_ID, PCI_ANY_ID },
1253 	{0}	/* Terminating entry */
1254 };
1255 MODULE_DEVICE_TABLE(pci, mptspi_pci_table);
1256 
1257 
1258 /*
1259  * renegotiate for a given target
1260  */
1261 static void
1262 mptspi_dv_renegotiate_work(struct work_struct *work)
1263 {
1264 	struct work_queue_wrapper *wqw =
1265 		container_of(work, struct work_queue_wrapper, work);
1266 	struct _MPT_SCSI_HOST *hd = wqw->hd;
1267 	struct scsi_device *sdev;
1268 	struct scsi_target *starget;
1269 	struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
1270 	u32 nego;
1271 	MPT_ADAPTER *ioc = hd->ioc;
1272 
1273 	kfree(wqw);
1274 
1275 	if (hd->spi_pending) {
1276 		shost_for_each_device(sdev, ioc->sh) {
1277 			if  (hd->spi_pending & (1 << sdev->id))
1278 				continue;
1279 			starget = scsi_target(sdev);
1280 			nego = mptspi_getRP(starget);
1281 			pg1.RequestedParameters = cpu_to_le32(nego);
1282 			pg1.Reserved = 0;
1283 			pg1.Configuration = 0;
1284 			mptspi_write_spi_device_pg1(starget, &pg1);
1285 		}
1286 	} else {
1287 		shost_for_each_device(sdev, ioc->sh)
1288 			mptspi_dv_device(hd, sdev);
1289 	}
1290 }
1291 
1292 static void
1293 mptspi_dv_renegotiate(struct _MPT_SCSI_HOST *hd)
1294 {
1295 	struct work_queue_wrapper *wqw = kmalloc(sizeof(*wqw), GFP_ATOMIC);
1296 
1297 	if (!wqw)
1298 		return;
1299 
1300 	INIT_WORK(&wqw->work, mptspi_dv_renegotiate_work);
1301 	wqw->hd = hd;
1302 
1303 	schedule_work(&wqw->work);
1304 }
1305 
1306 /*
1307  * spi module reset handler
1308  */
1309 static int
1310 mptspi_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
1311 {
1312 	int rc;
1313 
1314 	rc = mptscsih_ioc_reset(ioc, reset_phase);
1315 	if ((ioc->bus_type != SPI) || (!rc))
1316 		return rc;
1317 
1318 	/* only try to do a renegotiation if we're properly set up
1319 	 * if we get an ioc fault on bringup, ioc->sh will be NULL */
1320 	if (reset_phase == MPT_IOC_POST_RESET &&
1321 	    ioc->sh) {
1322 		struct _MPT_SCSI_HOST *hd = shost_priv(ioc->sh);
1323 
1324 		mptspi_dv_renegotiate(hd);
1325 	}
1326 
1327 	return rc;
1328 }
1329 
1330 #ifdef CONFIG_PM
1331 /*
1332  * spi module resume handler
1333  */
1334 static int
1335 mptspi_resume(struct pci_dev *pdev)
1336 {
1337 	MPT_ADAPTER 	*ioc = pci_get_drvdata(pdev);
1338 	struct _MPT_SCSI_HOST *hd = shost_priv(ioc->sh);
1339 	int rc;
1340 
1341 	rc = mptscsih_resume(pdev);
1342 	mptspi_dv_renegotiate(hd);
1343 
1344 	return rc;
1345 }
1346 #endif
1347 
1348 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1349 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1350 /*
1351  *	mptspi_probe - Installs scsi devices per bus.
1352  *	@pdev: Pointer to pci_dev structure
1353  *
1354  *	Returns 0 for success, non-zero for failure.
1355  *
1356  */
1357 static int
1358 mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
1359 {
1360 	struct Scsi_Host	*sh;
1361 	MPT_SCSI_HOST		*hd;
1362 	MPT_ADAPTER 		*ioc;
1363 	unsigned long		 flags;
1364 	int			 ii;
1365 	int			 numSGE = 0;
1366 	int			 scale;
1367 	int			 ioc_cap;
1368 	int			error=0;
1369 	int			r;
1370 
1371 	if ((r = mpt_attach(pdev,id)) != 0)
1372 		return r;
1373 
1374 	ioc = pci_get_drvdata(pdev);
1375 	ioc->DoneCtx = mptspiDoneCtx;
1376 	ioc->TaskCtx = mptspiTaskCtx;
1377 	ioc->InternalCtx = mptspiInternalCtx;
1378 
1379 	/*  Added sanity check on readiness of the MPT adapter.
1380 	 */
1381 	if (ioc->last_state != MPI_IOC_STATE_OPERATIONAL) {
1382 		printk(MYIOC_s_WARN_FMT
1383 		  "Skipping because it's not operational!\n",
1384 		  ioc->name);
1385 		error = -ENODEV;
1386 		goto out_mptspi_probe;
1387 	}
1388 
1389 	if (!ioc->active) {
1390 		printk(MYIOC_s_WARN_FMT "Skipping because it's disabled!\n",
1391 		  ioc->name);
1392 		error = -ENODEV;
1393 		goto out_mptspi_probe;
1394 	}
1395 
1396 	/*  Sanity check - ensure at least 1 port is INITIATOR capable
1397 	 */
1398 	ioc_cap = 0;
1399 	for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) {
1400 		if (ioc->pfacts[ii].ProtocolFlags &
1401 		    MPI_PORTFACTS_PROTOCOL_INITIATOR)
1402 			ioc_cap ++;
1403 	}
1404 
1405 	if (!ioc_cap) {
1406 		printk(MYIOC_s_WARN_FMT
1407 			"Skipping ioc=%p because SCSI Initiator mode is NOT enabled!\n",
1408 			ioc->name, ioc);
1409 		return 0;
1410 	}
1411 
1412 	sh = scsi_host_alloc(&mptspi_driver_template, sizeof(MPT_SCSI_HOST));
1413 
1414 	if (!sh) {
1415 		printk(MYIOC_s_WARN_FMT
1416 			"Unable to register controller with SCSI subsystem\n",
1417 			ioc->name);
1418 		error = -1;
1419 		goto out_mptspi_probe;
1420         }
1421 
1422 	/* VMWare emulation doesn't properly implement WRITE_SAME
1423 	 */
1424 	if (pdev->subsystem_vendor == 0x15AD)
1425 		sh->no_write_same = 1;
1426 
1427 	spin_lock_irqsave(&ioc->FreeQlock, flags);
1428 
1429 	/* Attach the SCSI Host to the IOC structure
1430 	 */
1431 	ioc->sh = sh;
1432 
1433 	sh->io_port = 0;
1434 	sh->n_io_port = 0;
1435 	sh->irq = 0;
1436 
1437 	/* set 16 byte cdb's */
1438 	sh->max_cmd_len = 16;
1439 
1440 	/* Yikes!  This is important!
1441 	 * Otherwise, by default, linux
1442 	 * only scans target IDs 0-7!
1443 	 * pfactsN->MaxDevices unreliable
1444 	 * (not supported in early
1445 	 *	versions of the FW).
1446 	 * max_id = 1 + actual max id,
1447 	 * max_lun = 1 + actual last lun,
1448 	 *	see hosts.h :o(
1449 	 */
1450 	sh->max_id = ioc->devices_per_bus;
1451 
1452 	sh->max_lun = MPT_LAST_LUN + 1;
1453 	/*
1454 	 * If RAID Firmware Detected, setup virtual channel
1455 	 */
1456 	if (ioc->ir_firmware)
1457 		sh->max_channel = 1;
1458 	else
1459 		sh->max_channel = 0;
1460 	sh->this_id = ioc->pfacts[0].PortSCSIID;
1461 
1462 	/* Required entry.
1463 	 */
1464 	sh->unique_id = ioc->id;
1465 
1466 	/* Verify that we won't exceed the maximum
1467 	 * number of chain buffers
1468 	 * We can optimize:  ZZ = req_sz/sizeof(SGE)
1469 	 * For 32bit SGE's:
1470 	 *  numSGE = 1 + (ZZ-1)*(maxChain -1) + ZZ
1471 	 *               + (req_sz - 64)/sizeof(SGE)
1472 	 * A slightly different algorithm is required for
1473 	 * 64bit SGEs.
1474 	 */
1475 	scale = ioc->req_sz/ioc->SGE_size;
1476 	if (ioc->sg_addr_size == sizeof(u64)) {
1477 		numSGE = (scale - 1) *
1478 		  (ioc->facts.MaxChainDepth-1) + scale +
1479 		  (ioc->req_sz - 60) / ioc->SGE_size;
1480 	} else {
1481 		numSGE = 1 + (scale - 1) *
1482 		  (ioc->facts.MaxChainDepth-1) + scale +
1483 		  (ioc->req_sz - 64) / ioc->SGE_size;
1484 	}
1485 
1486 	if (numSGE < sh->sg_tablesize) {
1487 		/* Reset this value */
1488 		dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1489 		  "Resetting sg_tablesize to %d from %d\n",
1490 		  ioc->name, numSGE, sh->sg_tablesize));
1491 		sh->sg_tablesize = numSGE;
1492 	}
1493 
1494 	spin_unlock_irqrestore(&ioc->FreeQlock, flags);
1495 
1496 	hd = shost_priv(sh);
1497 	hd->ioc = ioc;
1498 
1499 	/* SCSI needs scsi_cmnd lookup table!
1500 	 * (with size equal to req_depth*PtrSz!)
1501 	 */
1502 	ioc->ScsiLookup = kcalloc(ioc->req_depth, sizeof(void *), GFP_ATOMIC);
1503 	if (!ioc->ScsiLookup) {
1504 		error = -ENOMEM;
1505 		goto out_mptspi_probe;
1506 	}
1507 	spin_lock_init(&ioc->scsi_lookup_lock);
1508 
1509 	dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ScsiLookup @ %p\n",
1510 		 ioc->name, ioc->ScsiLookup));
1511 
1512 	ioc->spi_data.Saf_Te = mpt_saf_te;
1513 	ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1514 		"saf_te %x\n",
1515 		ioc->name,
1516 		mpt_saf_te));
1517 	ioc->spi_data.noQas = 0;
1518 
1519 	hd->last_queue_full = 0;
1520 	hd->spi_pending = 0;
1521 
1522 	/* Some versions of the firmware don't support page 0; without
1523 	 * that we can't get the parameters */
1524 	if (ioc->spi_data.sdp0length != 0)
1525 		sh->transportt = mptspi_transport_template;
1526 
1527 	error = scsi_add_host (sh, &ioc->pcidev->dev);
1528 	if(error) {
1529 		dprintk(ioc, printk(MYIOC_s_ERR_FMT
1530 		  "scsi_add_host failed\n", ioc->name));
1531 		goto out_mptspi_probe;
1532 	}
1533 
1534 	/*
1535 	 * issue internal bus reset
1536 	 */
1537 	if (ioc->spi_data.bus_reset)
1538 		mptscsih_IssueTaskMgmt(hd,
1539 		    MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
1540 		    0, 0, 0, 0, 5);
1541 
1542 	scsi_scan_host(sh);
1543 	return 0;
1544 
1545 out_mptspi_probe:
1546 
1547 	mptscsih_remove(pdev);
1548 	return error;
1549 }
1550 
1551 static struct pci_driver mptspi_driver = {
1552 	.name		= "mptspi",
1553 	.id_table	= mptspi_pci_table,
1554 	.probe		= mptspi_probe,
1555 	.remove		= mptscsih_remove,
1556 	.shutdown	= mptscsih_shutdown,
1557 #ifdef CONFIG_PM
1558 	.suspend	= mptscsih_suspend,
1559 	.resume		= mptspi_resume,
1560 #endif
1561 };
1562 
1563 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1564 /**
1565  *	mptspi_init - Register MPT adapter(s) as SCSI host(s) with SCSI mid-layer.
1566  *
1567  *	Returns 0 for success, non-zero for failure.
1568  */
1569 static int __init
1570 mptspi_init(void)
1571 {
1572 	int error;
1573 
1574 	show_mptmod_ver(my_NAME, my_VERSION);
1575 
1576 	mptspi_transport_template = spi_attach_transport(&mptspi_transport_functions);
1577 	if (!mptspi_transport_template)
1578 		return -ENODEV;
1579 
1580 	mptspiDoneCtx = mpt_register(mptscsih_io_done, MPTSPI_DRIVER,
1581 	    "mptscsih_io_done");
1582 	mptspiTaskCtx = mpt_register(mptscsih_taskmgmt_complete, MPTSPI_DRIVER,
1583 	    "mptscsih_taskmgmt_complete");
1584 	mptspiInternalCtx = mpt_register(mptscsih_scandv_complete,
1585 	    MPTSPI_DRIVER, "mptscsih_scandv_complete");
1586 
1587 	mpt_event_register(mptspiDoneCtx, mptspi_event_process);
1588 	mpt_reset_register(mptspiDoneCtx, mptspi_ioc_reset);
1589 
1590 	error = pci_register_driver(&mptspi_driver);
1591 	if (error)
1592 		spi_release_transport(mptspi_transport_template);
1593 
1594 	return error;
1595 }
1596 
1597 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1598 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1599 /**
1600  *	mptspi_exit - Unregisters MPT adapter(s)
1601  */
1602 static void __exit
1603 mptspi_exit(void)
1604 {
1605 	pci_unregister_driver(&mptspi_driver);
1606 
1607 	mpt_reset_deregister(mptspiDoneCtx);
1608 	mpt_event_deregister(mptspiDoneCtx);
1609 
1610 	mpt_deregister(mptspiInternalCtx);
1611 	mpt_deregister(mptspiTaskCtx);
1612 	mpt_deregister(mptspiDoneCtx);
1613 	spi_release_transport(mptspi_transport_template);
1614 }
1615 
1616 module_init(mptspi_init);
1617 module_exit(mptspi_exit);
1618