1 /*
2  *  linux/drivers/message/fusion/mptscsih.c
3  *      For use with LSI PCI chip/adapter(s)
4  *      running LSI Fusion MPT (Message Passing Technology) firmware.
5  *
6  *  Copyright (c) 1999-2008 LSI Corporation
7  *  (mailto:DL-MPTFusionLinux@lsi.com)
8  *
9  */
10 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
11 /*
12     This program is free software; you can redistribute it and/or modify
13     it under the terms of the GNU General Public License as published by
14     the Free Software Foundation; version 2 of the License.
15 
16     This program is distributed in the hope that it will be useful,
17     but WITHOUT ANY WARRANTY; without even the implied warranty of
18     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19     GNU General Public License for more details.
20 
21     NO WARRANTY
22     THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
23     CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
24     LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
25     MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
26     solely responsible for determining the appropriateness of using and
27     distributing the Program and assumes all risks associated with its
28     exercise of rights under this Agreement, including but not limited to
29     the risks and costs of program errors, damage to or loss of data,
30     programs or equipment, and unavailability or interruption of operations.
31 
32     DISCLAIMER OF LIABILITY
33     NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
34     DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
35     DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
36     ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
37     TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
38     USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
39     HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
40 
41     You should have received a copy of the GNU General Public License
42     along with this program; if not, write to the Free Software
43     Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
44 */
45 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
46 
47 #include <linux/module.h>
48 #include <linux/kernel.h>
49 #include <linux/slab.h>
50 #include <linux/init.h>
51 #include <linux/errno.h>
52 #include <linux/kdev_t.h>
53 #include <linux/blkdev.h>
54 #include <linux/delay.h>	/* for mdelay */
55 #include <linux/interrupt.h>
56 #include <linux/reboot.h>	/* notifier code */
57 #include <linux/workqueue.h>
58 
59 #include <scsi/scsi.h>
60 #include <scsi/scsi_cmnd.h>
61 #include <scsi/scsi_device.h>
62 #include <scsi/scsi_host.h>
63 #include <scsi/scsi_tcq.h>
64 #include <scsi/scsi_dbg.h>
65 
66 #include "mptbase.h"
67 #include "mptscsih.h"
68 #include "lsi/mpi_log_sas.h"
69 
70 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
71 #define my_NAME		"Fusion MPT SCSI Host driver"
72 #define my_VERSION	MPT_LINUX_VERSION_COMMON
73 #define MYNAM		"mptscsih"
74 
75 MODULE_AUTHOR(MODULEAUTHOR);
76 MODULE_DESCRIPTION(my_NAME);
77 MODULE_LICENSE("GPL");
78 MODULE_VERSION(my_VERSION);
79 
80 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
81 /*
82  *  Other private/forward protos...
83  */
84 struct scsi_cmnd	*mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i);
85 static struct scsi_cmnd * mptscsih_getclear_scsi_lookup(MPT_ADAPTER *ioc, int i);
86 static void	mptscsih_set_scsi_lookup(MPT_ADAPTER *ioc, int i, struct scsi_cmnd *scmd);
87 static int	SCPNT_TO_LOOKUP_IDX(MPT_ADAPTER *ioc, struct scsi_cmnd *scmd);
88 int		mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
89 static void	mptscsih_report_queue_full(struct scsi_cmnd *sc, SCSIIOReply_t *pScsiReply, SCSIIORequest_t *pScsiReq);
90 int		mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
91 
92 static int	mptscsih_AddSGE(MPT_ADAPTER *ioc, struct scsi_cmnd *SCpnt,
93 				 SCSIIORequest_t *pReq, int req_idx);
94 static void	mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx);
95 static void	mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply);
96 
97 int	mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id,
98 		u64 lun, int ctx2abort, ulong timeout);
99 
100 int		mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset);
101 int		mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply);
102 
103 void
104 mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code);
105 static int	mptscsih_get_completion_code(MPT_ADAPTER *ioc,
106 		MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply);
107 int		mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
108 static int	mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *iocmd);
109 static void	mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice);
110 
111 static int
112 mptscsih_taskmgmt_reply(MPT_ADAPTER *ioc, u8 type,
113 				SCSITaskMgmtReply_t *pScsiTmReply);
114 void 		mptscsih_remove(struct pci_dev *);
115 void 		mptscsih_shutdown(struct pci_dev *);
116 #ifdef CONFIG_PM
117 int 		mptscsih_suspend(struct pci_dev *pdev, pm_message_t state);
118 int 		mptscsih_resume(struct pci_dev *pdev);
119 #endif
120 
121 
122 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
123 /*
124  *	mptscsih_getFreeChainBuffer - Function to get a free chain
125  *	from the MPT_SCSI_HOST FreeChainQ.
126  *	@ioc: Pointer to MPT_ADAPTER structure
127  *	@req_idx: Index of the SCSI IO request frame. (output)
128  *
129  *	return SUCCESS or FAILED
130  */
131 static inline int
132 mptscsih_getFreeChainBuffer(MPT_ADAPTER *ioc, int *retIndex)
133 {
134 	MPT_FRAME_HDR *chainBuf;
135 	unsigned long flags;
136 	int rc;
137 	int chain_idx;
138 
139 	dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "getFreeChainBuffer called\n",
140 	    ioc->name));
141 	spin_lock_irqsave(&ioc->FreeQlock, flags);
142 	if (!list_empty(&ioc->FreeChainQ)) {
143 		int offset;
144 
145 		chainBuf = list_entry(ioc->FreeChainQ.next, MPT_FRAME_HDR,
146 				u.frame.linkage.list);
147 		list_del(&chainBuf->u.frame.linkage.list);
148 		offset = (u8 *)chainBuf - (u8 *)ioc->ChainBuffer;
149 		chain_idx = offset / ioc->req_sz;
150 		rc = SUCCESS;
151 		dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT
152 		    "getFreeChainBuffer chainBuf=%p ChainBuffer=%p offset=%d chain_idx=%d\n",
153 		    ioc->name, chainBuf, ioc->ChainBuffer, offset, chain_idx));
154 	} else {
155 		rc = FAILED;
156 		chain_idx = MPT_HOST_NO_CHAIN;
157 		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT "getFreeChainBuffer failed\n",
158 		    ioc->name));
159 	}
160 	spin_unlock_irqrestore(&ioc->FreeQlock, flags);
161 
162 	*retIndex = chain_idx;
163 	return rc;
164 } /* mptscsih_getFreeChainBuffer() */
165 
166 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
167 /*
168  *	mptscsih_AddSGE - Add a SGE (plus chain buffers) to the
169  *	SCSIIORequest_t Message Frame.
170  *	@ioc: Pointer to MPT_ADAPTER structure
171  *	@SCpnt: Pointer to scsi_cmnd structure
172  *	@pReq: Pointer to SCSIIORequest_t structure
173  *
174  *	Returns ...
175  */
176 static int
177 mptscsih_AddSGE(MPT_ADAPTER *ioc, struct scsi_cmnd *SCpnt,
178 		SCSIIORequest_t *pReq, int req_idx)
179 {
180 	char 	*psge;
181 	char	*chainSge;
182 	struct scatterlist *sg;
183 	int	 frm_sz;
184 	int	 sges_left, sg_done;
185 	int	 chain_idx = MPT_HOST_NO_CHAIN;
186 	int	 sgeOffset;
187 	int	 numSgeSlots, numSgeThisFrame;
188 	u32	 sgflags, sgdir, thisxfer = 0;
189 	int	 chain_dma_off = 0;
190 	int	 newIndex;
191 	int	 ii;
192 	dma_addr_t v2;
193 	u32	RequestNB;
194 
195 	sgdir = le32_to_cpu(pReq->Control) & MPI_SCSIIO_CONTROL_DATADIRECTION_MASK;
196 	if (sgdir == MPI_SCSIIO_CONTROL_WRITE)  {
197 		sgdir = MPT_TRANSFER_HOST_TO_IOC;
198 	} else {
199 		sgdir = MPT_TRANSFER_IOC_TO_HOST;
200 	}
201 
202 	psge = (char *) &pReq->SGL;
203 	frm_sz = ioc->req_sz;
204 
205 	/* Map the data portion, if any.
206 	 * sges_left  = 0 if no data transfer.
207 	 */
208 	sges_left = scsi_dma_map(SCpnt);
209 	if (sges_left < 0)
210 		return FAILED;
211 
212 	/* Handle the SG case.
213 	 */
214 	sg = scsi_sglist(SCpnt);
215 	sg_done  = 0;
216 	sgeOffset = sizeof(SCSIIORequest_t) - sizeof(SGE_IO_UNION);
217 	chainSge = NULL;
218 
219 	/* Prior to entering this loop - the following must be set
220 	 * current MF:  sgeOffset (bytes)
221 	 *              chainSge (Null if original MF is not a chain buffer)
222 	 *              sg_done (num SGE done for this MF)
223 	 */
224 
225 nextSGEset:
226 	numSgeSlots = ((frm_sz - sgeOffset) / ioc->SGE_size);
227 	numSgeThisFrame = (sges_left < numSgeSlots) ? sges_left : numSgeSlots;
228 
229 	sgflags = MPT_SGE_FLAGS_SIMPLE_ELEMENT | sgdir;
230 
231 	/* Get first (num - 1) SG elements
232 	 * Skip any SG entries with a length of 0
233 	 * NOTE: at finish, sg and psge pointed to NEXT data/location positions
234 	 */
235 	for (ii=0; ii < (numSgeThisFrame-1); ii++) {
236 		thisxfer = sg_dma_len(sg);
237 		if (thisxfer == 0) {
238 			/* Get next SG element from the OS */
239 			sg = sg_next(sg);
240 			sg_done++;
241 			continue;
242 		}
243 
244 		v2 = sg_dma_address(sg);
245 		ioc->add_sge(psge, sgflags | thisxfer, v2);
246 
247 		/* Get next SG element from the OS */
248 		sg = sg_next(sg);
249 		psge += ioc->SGE_size;
250 		sgeOffset += ioc->SGE_size;
251 		sg_done++;
252 	}
253 
254 	if (numSgeThisFrame == sges_left) {
255 		/* Add last element, end of buffer and end of list flags.
256 		 */
257 		sgflags |= MPT_SGE_FLAGS_LAST_ELEMENT |
258 				MPT_SGE_FLAGS_END_OF_BUFFER |
259 				MPT_SGE_FLAGS_END_OF_LIST;
260 
261 		/* Add last SGE and set termination flags.
262 		 * Note: Last SGE may have a length of 0 - which should be ok.
263 		 */
264 		thisxfer = sg_dma_len(sg);
265 
266 		v2 = sg_dma_address(sg);
267 		ioc->add_sge(psge, sgflags | thisxfer, v2);
268 		sgeOffset += ioc->SGE_size;
269 		sg_done++;
270 
271 		if (chainSge) {
272 			/* The current buffer is a chain buffer,
273 			 * but there is not another one.
274 			 * Update the chain element
275 			 * Offset and Length fields.
276 			 */
277 			ioc->add_chain((char *)chainSge, 0, sgeOffset,
278 				ioc->ChainBufferDMA + chain_dma_off);
279 		} else {
280 			/* The current buffer is the original MF
281 			 * and there is no Chain buffer.
282 			 */
283 			pReq->ChainOffset = 0;
284 			RequestNB = (((sgeOffset - 1) >> ioc->NBShiftFactor)  + 1) & 0x03;
285 			dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT
286 			    "Single Buffer RequestNB=%x, sgeOffset=%d\n", ioc->name, RequestNB, sgeOffset));
287 			ioc->RequestNB[req_idx] = RequestNB;
288 		}
289 	} else {
290 		/* At least one chain buffer is needed.
291 		 * Complete the first MF
292 		 *  - last SGE element, set the LastElement bit
293 		 *  - set ChainOffset (words) for orig MF
294 		 *             (OR finish previous MF chain buffer)
295 		 *  - update MFStructPtr ChainIndex
296 		 *  - Populate chain element
297 		 * Also
298 		 * Loop until done.
299 		 */
300 
301 		dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SG: Chain Required! sg done %d\n",
302 				ioc->name, sg_done));
303 
304 		/* Set LAST_ELEMENT flag for last non-chain element
305 		 * in the buffer. Since psge points at the NEXT
306 		 * SGE element, go back one SGE element, update the flags
307 		 * and reset the pointer. (Note: sgflags & thisxfer are already
308 		 * set properly).
309 		 */
310 		if (sg_done) {
311 			u32 *ptmp = (u32 *) (psge - ioc->SGE_size);
312 			sgflags = le32_to_cpu(*ptmp);
313 			sgflags |= MPT_SGE_FLAGS_LAST_ELEMENT;
314 			*ptmp = cpu_to_le32(sgflags);
315 		}
316 
317 		if (chainSge) {
318 			/* The current buffer is a chain buffer.
319 			 * chainSge points to the previous Chain Element.
320 			 * Update its chain element Offset and Length (must
321 			 * include chain element size) fields.
322 			 * Old chain element is now complete.
323 			 */
324 			u8 nextChain = (u8) (sgeOffset >> 2);
325 			sgeOffset += ioc->SGE_size;
326 			ioc->add_chain((char *)chainSge, nextChain, sgeOffset,
327 					 ioc->ChainBufferDMA + chain_dma_off);
328 		} else {
329 			/* The original MF buffer requires a chain buffer -
330 			 * set the offset.
331 			 * Last element in this MF is a chain element.
332 			 */
333 			pReq->ChainOffset = (u8) (sgeOffset >> 2);
334 			RequestNB = (((sgeOffset - 1) >> ioc->NBShiftFactor)  + 1) & 0x03;
335 			dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Chain Buffer Needed, RequestNB=%x sgeOffset=%d\n", ioc->name, RequestNB, sgeOffset));
336 			ioc->RequestNB[req_idx] = RequestNB;
337 		}
338 
339 		sges_left -= sg_done;
340 
341 
342 		/* NOTE: psge points to the beginning of the chain element
343 		 * in current buffer. Get a chain buffer.
344 		 */
345 		if ((mptscsih_getFreeChainBuffer(ioc, &newIndex)) == FAILED) {
346 			dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
347 			    "getFreeChainBuffer FAILED SCSI cmd=%02x (%p)\n",
348  			    ioc->name, pReq->CDB[0], SCpnt));
349 			return FAILED;
350 		}
351 
352 		/* Update the tracking arrays.
353 		 * If chainSge == NULL, update ReqToChain, else ChainToChain
354 		 */
355 		if (chainSge) {
356 			ioc->ChainToChain[chain_idx] = newIndex;
357 		} else {
358 			ioc->ReqToChain[req_idx] = newIndex;
359 		}
360 		chain_idx = newIndex;
361 		chain_dma_off = ioc->req_sz * chain_idx;
362 
363 		/* Populate the chainSGE for the current buffer.
364 		 * - Set chain buffer pointer to psge and fill
365 		 *   out the Address and Flags fields.
366 		 */
367 		chainSge = (char *) psge;
368 		dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "  Current buff @ %p (index 0x%x)",
369 		    ioc->name, psge, req_idx));
370 
371 		/* Start the SGE for the next buffer
372 		 */
373 		psge = (char *) (ioc->ChainBuffer + chain_dma_off);
374 		sgeOffset = 0;
375 		sg_done = 0;
376 
377 		dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "  Chain buff @ %p (index 0x%x)\n",
378 		    ioc->name, psge, chain_idx));
379 
380 		/* Start the SGE for the next buffer
381 		 */
382 
383 		goto nextSGEset;
384 	}
385 
386 	return SUCCESS;
387 } /* mptscsih_AddSGE() */
388 
389 static void
390 mptscsih_issue_sep_command(MPT_ADAPTER *ioc, VirtTarget *vtarget,
391     U32 SlotStatus)
392 {
393 	MPT_FRAME_HDR *mf;
394 	SEPRequest_t 	 *SEPMsg;
395 
396 	if (ioc->bus_type != SAS)
397 		return;
398 
399 	/* Not supported for hidden raid components
400 	 */
401 	if (vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT)
402 		return;
403 
404 	if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) {
405 		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: no msg frames!!\n",
406 		    ioc->name,__func__));
407 		return;
408 	}
409 
410 	SEPMsg = (SEPRequest_t *)mf;
411 	SEPMsg->Function = MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR;
412 	SEPMsg->Bus = vtarget->channel;
413 	SEPMsg->TargetID = vtarget->id;
414 	SEPMsg->Action = MPI_SEP_REQ_ACTION_WRITE_STATUS;
415 	SEPMsg->SlotStatus = SlotStatus;
416 	devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
417 	    "Sending SEP cmd=%x channel=%d id=%d\n",
418 	    ioc->name, SlotStatus, SEPMsg->Bus, SEPMsg->TargetID));
419 	mpt_put_msg_frame(ioc->DoneCtx, ioc, mf);
420 }
421 
422 #ifdef CONFIG_FUSION_LOGGING
423 /**
424  *	mptscsih_info_scsiio - debug print info on reply frame
425  *	@ioc: Pointer to MPT_ADAPTER structure
426  *	@sc: original scsi cmnd pointer
427  *	@pScsiReply: Pointer to MPT reply frame
428  *
429  *	MPT_DEBUG_REPLY needs to be enabled to obtain this info
430  *
431  *	Refer to lsi/mpi.h.
432  **/
433 static void
434 mptscsih_info_scsiio(MPT_ADAPTER *ioc, struct scsi_cmnd *sc, SCSIIOReply_t * pScsiReply)
435 {
436 	char	*desc = NULL;
437 	char	*desc1 = NULL;
438 	u16	ioc_status;
439 	u8	skey, asc, ascq;
440 
441 	ioc_status = le16_to_cpu(pScsiReply->IOCStatus) & MPI_IOCSTATUS_MASK;
442 
443 	switch (ioc_status) {
444 
445 	case MPI_IOCSTATUS_SUCCESS:
446 		desc = "success";
447 		break;
448 	case MPI_IOCSTATUS_SCSI_INVALID_BUS:
449 		desc = "invalid bus";
450 		break;
451 	case MPI_IOCSTATUS_SCSI_INVALID_TARGETID:
452 		desc = "invalid target_id";
453 		break;
454 	case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
455 		desc = "device not there";
456 		break;
457 	case MPI_IOCSTATUS_SCSI_DATA_OVERRUN:
458 		desc = "data overrun";
459 		break;
460 	case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN:
461 		desc = "data underrun";
462 		break;
463 	case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR:
464 		desc = "I/O data error";
465 		break;
466 	case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR:
467 		desc = "protocol error";
468 		break;
469 	case MPI_IOCSTATUS_SCSI_TASK_TERMINATED:
470 		desc = "task terminated";
471 		break;
472 	case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
473 		desc = "residual mismatch";
474 		break;
475 	case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
476 		desc = "task management failed";
477 		break;
478 	case MPI_IOCSTATUS_SCSI_IOC_TERMINATED:
479 		desc = "IOC terminated";
480 		break;
481 	case MPI_IOCSTATUS_SCSI_EXT_TERMINATED:
482 		desc = "ext terminated";
483 		break;
484 	default:
485 		desc = "";
486 		break;
487 	}
488 
489 	switch (pScsiReply->SCSIStatus)
490 	{
491 
492 	case MPI_SCSI_STATUS_SUCCESS:
493 		desc1 = "success";
494 		break;
495 	case MPI_SCSI_STATUS_CHECK_CONDITION:
496 		desc1 = "check condition";
497 		break;
498 	case MPI_SCSI_STATUS_CONDITION_MET:
499 		desc1 = "condition met";
500 		break;
501 	case MPI_SCSI_STATUS_BUSY:
502 		desc1 = "busy";
503 		break;
504 	case MPI_SCSI_STATUS_INTERMEDIATE:
505 		desc1 = "intermediate";
506 		break;
507 	case MPI_SCSI_STATUS_INTERMEDIATE_CONDMET:
508 		desc1 = "intermediate condmet";
509 		break;
510 	case MPI_SCSI_STATUS_RESERVATION_CONFLICT:
511 		desc1 = "reservation conflict";
512 		break;
513 	case MPI_SCSI_STATUS_COMMAND_TERMINATED:
514 		desc1 = "command terminated";
515 		break;
516 	case MPI_SCSI_STATUS_TASK_SET_FULL:
517 		desc1 = "task set full";
518 		break;
519 	case MPI_SCSI_STATUS_ACA_ACTIVE:
520 		desc1 = "aca active";
521 		break;
522 	case MPI_SCSI_STATUS_FCPEXT_DEVICE_LOGGED_OUT:
523 		desc1 = "fcpext device logged out";
524 		break;
525 	case MPI_SCSI_STATUS_FCPEXT_NO_LINK:
526 		desc1 = "fcpext no link";
527 		break;
528 	case MPI_SCSI_STATUS_FCPEXT_UNASSIGNED:
529 		desc1 = "fcpext unassigned";
530 		break;
531 	default:
532 		desc1 = "";
533 		break;
534 	}
535 
536 	scsi_print_command(sc);
537 	printk(MYIOC_s_DEBUG_FMT "\tfw_channel = %d, fw_id = %d, lun = %llu\n",
538 	    ioc->name, pScsiReply->Bus, pScsiReply->TargetID, sc->device->lun);
539 	printk(MYIOC_s_DEBUG_FMT "\trequest_len = %d, underflow = %d, "
540 	    "resid = %d\n", ioc->name, scsi_bufflen(sc), sc->underflow,
541 	    scsi_get_resid(sc));
542 	printk(MYIOC_s_DEBUG_FMT "\ttag = %d, transfer_count = %d, "
543 	    "sc->result = %08X\n", ioc->name, le16_to_cpu(pScsiReply->TaskTag),
544 	    le32_to_cpu(pScsiReply->TransferCount), sc->result);
545 
546 	printk(MYIOC_s_DEBUG_FMT "\tiocstatus = %s (0x%04x), "
547 	    "scsi_status = %s (0x%02x), scsi_state = (0x%02x)\n",
548 	    ioc->name, desc, ioc_status, desc1, pScsiReply->SCSIStatus,
549 	    pScsiReply->SCSIState);
550 
551 	if (pScsiReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID) {
552 		skey = sc->sense_buffer[2] & 0x0F;
553 		asc = sc->sense_buffer[12];
554 		ascq = sc->sense_buffer[13];
555 
556 		printk(MYIOC_s_DEBUG_FMT "\t[sense_key,asc,ascq]: "
557 		    "[0x%02x,0x%02x,0x%02x]\n", ioc->name, skey, asc, ascq);
558 	}
559 
560 	/*
561 	 *  Look for + dump FCP ResponseInfo[]!
562 	 */
563 	if (pScsiReply->SCSIState & MPI_SCSI_STATE_RESPONSE_INFO_VALID &&
564 	    pScsiReply->ResponseInfo)
565 		printk(MYIOC_s_DEBUG_FMT "response_info = %08xh\n",
566 		    ioc->name, le32_to_cpu(pScsiReply->ResponseInfo));
567 }
568 #endif
569 
570 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
571 /*
572  *	mptscsih_io_done - Main SCSI IO callback routine registered to
573  *	Fusion MPT (base) driver
574  *	@ioc: Pointer to MPT_ADAPTER structure
575  *	@mf: Pointer to original MPT request frame
576  *	@r: Pointer to MPT reply frame (NULL if TurboReply)
577  *
578  *	This routine is called from mpt.c::mpt_interrupt() at the completion
579  *	of any SCSI IO request.
580  *	This routine is registered with the Fusion MPT (base) driver at driver
581  *	load/init time via the mpt_register() API call.
582  *
583  *	Returns 1 indicating alloc'd request frame ptr should be freed.
584  */
585 int
586 mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
587 {
588 	struct scsi_cmnd	*sc;
589 	MPT_SCSI_HOST	*hd;
590 	SCSIIORequest_t	*pScsiReq;
591 	SCSIIOReply_t	*pScsiReply;
592 	u16		 req_idx, req_idx_MR;
593 	VirtDevice	 *vdevice;
594 	VirtTarget	 *vtarget;
595 
596 	hd = shost_priv(ioc->sh);
597 	req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
598 	req_idx_MR = (mr != NULL) ?
599 	    le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx) : req_idx;
600 
601 	/* Special case, where already freed message frame is received from
602 	 * Firmware. It happens with Resetting IOC.
603 	 * Return immediately. Do not care
604 	 */
605 	if ((req_idx != req_idx_MR) ||
606 	    (le32_to_cpu(mf->u.frame.linkage.arg1) == 0xdeadbeaf))
607 		return 0;
608 
609 	sc = mptscsih_getclear_scsi_lookup(ioc, req_idx);
610 	if (sc == NULL) {
611 		MPIHeader_t *hdr = (MPIHeader_t *)mf;
612 
613 		/* Remark: writeSDP1 will use the ScsiDoneCtx
614 		 * If a SCSI I/O cmd, device disabled by OS and
615 		 * completion done. Cannot touch sc struct. Just free mem.
616 		 */
617 		if (hdr->Function == MPI_FUNCTION_SCSI_IO_REQUEST)
618 			printk(MYIOC_s_ERR_FMT "NULL ScsiCmd ptr!\n",
619 			ioc->name);
620 
621 		mptscsih_freeChainBuffers(ioc, req_idx);
622 		return 1;
623 	}
624 
625 	if ((unsigned char *)mf != sc->host_scribble) {
626 		mptscsih_freeChainBuffers(ioc, req_idx);
627 		return 1;
628 	}
629 
630 	if (ioc->bus_type == SAS) {
631 		VirtDevice *vdevice = sc->device->hostdata;
632 
633 		if (!vdevice || !vdevice->vtarget ||
634 		    vdevice->vtarget->deleted) {
635 			sc->result = DID_NO_CONNECT << 16;
636 			goto out;
637 		}
638 	}
639 
640 	sc->host_scribble = NULL;
641 	sc->result = DID_OK << 16;		/* Set default reply as OK */
642 	pScsiReq = (SCSIIORequest_t *) mf;
643 	pScsiReply = (SCSIIOReply_t *) mr;
644 
645 	if((ioc->facts.MsgVersion >= MPI_VERSION_01_05) && pScsiReply){
646 		dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT
647 			"ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d,task-tag=%d)\n",
648 			ioc->name, mf, mr, sc, req_idx, pScsiReply->TaskTag));
649 	}else{
650 		dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT
651 			"ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d)\n",
652 			ioc->name, mf, mr, sc, req_idx));
653 	}
654 
655 	if (pScsiReply == NULL) {
656 		/* special context reply handling */
657 		;
658 	} else {
659 		u32	 xfer_cnt;
660 		u16	 status;
661 		u8	 scsi_state, scsi_status;
662 		u32	 log_info;
663 
664 		status = le16_to_cpu(pScsiReply->IOCStatus) & MPI_IOCSTATUS_MASK;
665 
666 		scsi_state = pScsiReply->SCSIState;
667 		scsi_status = pScsiReply->SCSIStatus;
668 		xfer_cnt = le32_to_cpu(pScsiReply->TransferCount);
669 		scsi_set_resid(sc, scsi_bufflen(sc) - xfer_cnt);
670 		log_info = le32_to_cpu(pScsiReply->IOCLogInfo);
671 
672 		/*
673 		 *  if we get a data underrun indication, yet no data was
674 		 *  transferred and the SCSI status indicates that the
675 		 *  command was never started, change the data underrun
676 		 *  to success
677 		 */
678 		if (status == MPI_IOCSTATUS_SCSI_DATA_UNDERRUN && xfer_cnt == 0 &&
679 		    (scsi_status == MPI_SCSI_STATUS_BUSY ||
680 		     scsi_status == MPI_SCSI_STATUS_RESERVATION_CONFLICT ||
681 		     scsi_status == MPI_SCSI_STATUS_TASK_SET_FULL)) {
682 			status = MPI_IOCSTATUS_SUCCESS;
683 		}
684 
685 		if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID)
686 			mptscsih_copy_sense_data(sc, hd, mf, pScsiReply);
687 
688 		/*
689 		 *  Look for + dump FCP ResponseInfo[]!
690 		 */
691 		if (scsi_state & MPI_SCSI_STATE_RESPONSE_INFO_VALID &&
692 		    pScsiReply->ResponseInfo) {
693 			printk(MYIOC_s_NOTE_FMT "[%d:%d:%d:%llu] "
694 			"FCP_ResponseInfo=%08xh\n", ioc->name,
695 			sc->device->host->host_no, sc->device->channel,
696 			sc->device->id, sc->device->lun,
697 			le32_to_cpu(pScsiReply->ResponseInfo));
698 		}
699 
700 		switch(status) {
701 		case MPI_IOCSTATUS_BUSY:			/* 0x0002 */
702 		case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES:	/* 0x0006 */
703 			/* CHECKME!
704 			 * Maybe: DRIVER_BUSY | SUGGEST_RETRY | DID_SOFT_ERROR (retry)
705 			 * But not: DID_BUS_BUSY lest one risk
706 			 * killing interrupt handler:-(
707 			 */
708 			sc->result = SAM_STAT_BUSY;
709 			break;
710 
711 		case MPI_IOCSTATUS_SCSI_INVALID_BUS:		/* 0x0041 */
712 		case MPI_IOCSTATUS_SCSI_INVALID_TARGETID:	/* 0x0042 */
713 			sc->result = DID_BAD_TARGET << 16;
714 			break;
715 
716 		case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE:	/* 0x0043 */
717 			/* Spoof to SCSI Selection Timeout! */
718 			if (ioc->bus_type != FC)
719 				sc->result = DID_NO_CONNECT << 16;
720 			/* else fibre, just stall until rescan event */
721 			else
722 				sc->result = DID_REQUEUE << 16;
723 
724 			if (hd->sel_timeout[pScsiReq->TargetID] < 0xFFFF)
725 				hd->sel_timeout[pScsiReq->TargetID]++;
726 
727 			vdevice = sc->device->hostdata;
728 			if (!vdevice)
729 				break;
730 			vtarget = vdevice->vtarget;
731 			if (vtarget->tflags & MPT_TARGET_FLAGS_LED_ON) {
732 				mptscsih_issue_sep_command(ioc, vtarget,
733 				    MPI_SEP_REQ_SLOTSTATUS_UNCONFIGURED);
734 				vtarget->tflags &= ~MPT_TARGET_FLAGS_LED_ON;
735 			}
736 			break;
737 
738 		case MPI_IOCSTATUS_SCSI_IOC_TERMINATED:		/* 0x004B */
739 			if ( ioc->bus_type == SAS ) {
740 				u16 ioc_status =
741 				    le16_to_cpu(pScsiReply->IOCStatus);
742 				if ((ioc_status &
743 					MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE)
744 					&&
745 					((log_info & SAS_LOGINFO_MASK) ==
746 					SAS_LOGINFO_NEXUS_LOSS)) {
747 						VirtDevice *vdevice =
748 						sc->device->hostdata;
749 
750 					    /* flag the device as being in
751 					     * device removal delay so we can
752 					     * notify the midlayer to hold off
753 					     * on timeout eh */
754 						if (vdevice && vdevice->
755 							vtarget &&
756 							vdevice->vtarget->
757 							raidVolume)
758 							printk(KERN_INFO
759 							"Skipping Raid Volume"
760 							"for inDMD\n");
761 						else if (vdevice &&
762 							vdevice->vtarget)
763 							vdevice->vtarget->
764 								inDMD = 1;
765 
766 					    sc->result =
767 						    (DID_TRANSPORT_DISRUPTED
768 						    << 16);
769 					    break;
770 				}
771 			} else if (ioc->bus_type == FC) {
772 				/*
773 				 * The FC IOC may kill a request for variety of
774 				 * reasons, some of which may be recovered by a
775 				 * retry, some which are unlikely to be
776 				 * recovered. Return DID_ERROR instead of
777 				 * DID_RESET to permit retry of the command,
778 				 * just not an infinite number of them
779 				 */
780 				sc->result = DID_ERROR << 16;
781 				break;
782 			}
783 
784 			/*
785 			 * Allow non-SAS & non-NEXUS_LOSS to drop into below code
786 			 */
787 			fallthrough;
788 
789 		case MPI_IOCSTATUS_SCSI_TASK_TERMINATED:	/* 0x0048 */
790 			/* Linux handles an unsolicited DID_RESET better
791 			 * than an unsolicited DID_ABORT.
792 			 */
793 			sc->result = DID_RESET << 16;
794 			break;
795 
796 		case MPI_IOCSTATUS_SCSI_EXT_TERMINATED:		/* 0x004C */
797 			if (ioc->bus_type == FC)
798 				sc->result = DID_ERROR << 16;
799 			else
800 				sc->result = DID_RESET << 16;
801 			break;
802 
803 		case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:	/* 0x0049 */
804 			scsi_set_resid(sc, scsi_bufflen(sc) - xfer_cnt);
805 			if((xfer_cnt==0)||(sc->underflow > xfer_cnt))
806 				sc->result=DID_SOFT_ERROR << 16;
807 			else /* Sufficient data transfer occurred */
808 				sc->result = (DID_OK << 16) | scsi_status;
809 			dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT
810 			    "RESIDUAL_MISMATCH: result=%x on channel=%d id=%d\n",
811 			    ioc->name, sc->result, sc->device->channel, sc->device->id));
812 			break;
813 
814 		case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN:		/* 0x0045 */
815 			/*
816 			 *  Do upfront check for valid SenseData and give it
817 			 *  precedence!
818 			 */
819 			sc->result = (DID_OK << 16) | scsi_status;
820 			if (!(scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID)) {
821 
822 				/*
823 				 * For an Errata on LSI53C1030
824 				 * When the length of request data
825 				 * and transfer data are different
826 				 * with result of command (READ or VERIFY),
827 				 * DID_SOFT_ERROR is set.
828 				 */
829 				if (ioc->bus_type == SPI) {
830 					if ((pScsiReq->CDB[0] == READ_6  && ((pScsiReq->CDB[1] & 0x02) == 0)) ||
831 					    pScsiReq->CDB[0] == READ_10 ||
832 					    pScsiReq->CDB[0] == READ_12 ||
833 						(pScsiReq->CDB[0] == READ_16 &&
834 						((pScsiReq->CDB[1] & 0x02) == 0)) ||
835 					    pScsiReq->CDB[0] == VERIFY  ||
836 					    pScsiReq->CDB[0] == VERIFY_16) {
837 						if (scsi_bufflen(sc) !=
838 							xfer_cnt) {
839 							sc->result =
840 							DID_SOFT_ERROR << 16;
841 						    printk(KERN_WARNING "Errata"
842 						    "on LSI53C1030 occurred."
843 						    "sc->req_bufflen=0x%02x,"
844 						    "xfer_cnt=0x%02x\n",
845 						    scsi_bufflen(sc),
846 						    xfer_cnt);
847 						}
848 					}
849 				}
850 
851 				if (xfer_cnt < sc->underflow) {
852 					if (scsi_status == SAM_STAT_BUSY)
853 						sc->result = SAM_STAT_BUSY;
854 					else
855 						sc->result = DID_SOFT_ERROR << 16;
856 				}
857 				if (scsi_state & (MPI_SCSI_STATE_AUTOSENSE_FAILED | MPI_SCSI_STATE_NO_SCSI_STATUS)) {
858 					/* What to do?
859 				 	*/
860 					sc->result = DID_SOFT_ERROR << 16;
861 				}
862 				else if (scsi_state & MPI_SCSI_STATE_TERMINATED) {
863 					/*  Not real sure here either...  */
864 					sc->result = DID_RESET << 16;
865 				}
866 			}
867 
868 
869 			dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT
870 			    "  sc->underflow={report ERR if < %02xh bytes xfer'd}\n",
871 			    ioc->name, sc->underflow));
872 			dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT
873 			    "  ActBytesXferd=%02xh\n", ioc->name, xfer_cnt));
874 
875 			/* Report Queue Full
876 			 */
877 			if (scsi_status == MPI_SCSI_STATUS_TASK_SET_FULL)
878 				mptscsih_report_queue_full(sc, pScsiReply, pScsiReq);
879 
880 			break;
881 
882 		case MPI_IOCSTATUS_SCSI_DATA_OVERRUN:		/* 0x0044 */
883 			scsi_set_resid(sc, 0);
884 			fallthrough;
885 		case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR:	/* 0x0040 */
886 		case MPI_IOCSTATUS_SUCCESS:			/* 0x0000 */
887 			sc->result = (DID_OK << 16) | scsi_status;
888 			if (scsi_state == 0) {
889 				;
890 			} else if (scsi_state &
891 			    MPI_SCSI_STATE_AUTOSENSE_VALID) {
892 
893 				/*
894 				 * For potential trouble on LSI53C1030.
895 				 * (date:2007.xx.)
896 				 * It is checked whether the length of
897 				 * request data is equal to
898 				 * the length of transfer and residual.
899 				 * MEDIUM_ERROR is set by incorrect data.
900 				 */
901 				if ((ioc->bus_type == SPI) &&
902 					(sc->sense_buffer[2] & 0x20)) {
903 					u32	 difftransfer;
904 					difftransfer =
905 					sc->sense_buffer[3] << 24 |
906 					sc->sense_buffer[4] << 16 |
907 					sc->sense_buffer[5] << 8 |
908 					sc->sense_buffer[6];
909 					if (((sc->sense_buffer[3] & 0x80) ==
910 						0x80) && (scsi_bufflen(sc)
911 						!= xfer_cnt)) {
912 						sc->sense_buffer[2] =
913 						    MEDIUM_ERROR;
914 						sc->sense_buffer[12] = 0xff;
915 						sc->sense_buffer[13] = 0xff;
916 						printk(KERN_WARNING"Errata"
917 						"on LSI53C1030 occurred."
918 						"sc->req_bufflen=0x%02x,"
919 						"xfer_cnt=0x%02x\n" ,
920 						scsi_bufflen(sc),
921 						xfer_cnt);
922 					}
923 					if (((sc->sense_buffer[3] & 0x80)
924 						!= 0x80) &&
925 						(scsi_bufflen(sc) !=
926 						xfer_cnt + difftransfer)) {
927 						sc->sense_buffer[2] =
928 							MEDIUM_ERROR;
929 						sc->sense_buffer[12] = 0xff;
930 						sc->sense_buffer[13] = 0xff;
931 						printk(KERN_WARNING
932 						"Errata on LSI53C1030 occurred"
933 						"sc->req_bufflen=0x%02x,"
934 						" xfer_cnt=0x%02x,"
935 						"difftransfer=0x%02x\n",
936 						scsi_bufflen(sc),
937 						xfer_cnt,
938 						difftransfer);
939 					}
940 				}
941 
942 				/*
943 				 * If running against circa 200003dd 909 MPT f/w,
944 				 * may get this (AUTOSENSE_VALID) for actual TASK_SET_FULL
945 				 * (QUEUE_FULL) returned from device! --> get 0x0000?128
946 				 * and with SenseBytes set to 0.
947 				 */
948 				if (pScsiReply->SCSIStatus == MPI_SCSI_STATUS_TASK_SET_FULL)
949 					mptscsih_report_queue_full(sc, pScsiReply, pScsiReq);
950 
951 			}
952 			else if (scsi_state &
953 			         (MPI_SCSI_STATE_AUTOSENSE_FAILED | MPI_SCSI_STATE_NO_SCSI_STATUS)
954 			   ) {
955 				/*
956 				 * What to do?
957 				 */
958 				sc->result = DID_SOFT_ERROR << 16;
959 			}
960 			else if (scsi_state & MPI_SCSI_STATE_TERMINATED) {
961 				/*  Not real sure here either...  */
962 				sc->result = DID_RESET << 16;
963 			}
964 			else if (scsi_state & MPI_SCSI_STATE_QUEUE_TAG_REJECTED) {
965 				/* Device Inq. data indicates that it supports
966 				 * QTags, but rejects QTag messages.
967 				 * This command completed OK.
968 				 *
969 				 * Not real sure here either so do nothing...  */
970 			}
971 
972 			if (sc->result == MPI_SCSI_STATUS_TASK_SET_FULL)
973 				mptscsih_report_queue_full(sc, pScsiReply, pScsiReq);
974 
975 			/* Add handling of:
976 			 * Reservation Conflict, Busy,
977 			 * Command Terminated, CHECK
978 			 */
979 			break;
980 
981 		case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR:		/* 0x0047 */
982 			sc->result = DID_SOFT_ERROR << 16;
983 			break;
984 
985 		case MPI_IOCSTATUS_INVALID_FUNCTION:		/* 0x0001 */
986 		case MPI_IOCSTATUS_INVALID_SGL:			/* 0x0003 */
987 		case MPI_IOCSTATUS_INTERNAL_ERROR:		/* 0x0004 */
988 		case MPI_IOCSTATUS_RESERVED:			/* 0x0005 */
989 		case MPI_IOCSTATUS_INVALID_FIELD:		/* 0x0007 */
990 		case MPI_IOCSTATUS_INVALID_STATE:		/* 0x0008 */
991 		case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR:		/* 0x0046 */
992 		case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED:	/* 0x004A */
993 		default:
994 			/*
995 			 * What to do?
996 			 */
997 			sc->result = DID_SOFT_ERROR << 16;
998 			break;
999 
1000 		}	/* switch(status) */
1001 
1002 #ifdef CONFIG_FUSION_LOGGING
1003 		if (sc->result && (ioc->debug_level & MPT_DEBUG_REPLY))
1004 			mptscsih_info_scsiio(ioc, sc, pScsiReply);
1005 #endif
1006 
1007 	} /* end of address reply case */
1008 out:
1009 	/* Unmap the DMA buffers, if any. */
1010 	scsi_dma_unmap(sc);
1011 
1012 	sc->scsi_done(sc);		/* Issue the command callback */
1013 
1014 	/* Free Chain buffers */
1015 	mptscsih_freeChainBuffers(ioc, req_idx);
1016 	return 1;
1017 }
1018 
1019 /*
1020  *	mptscsih_flush_running_cmds - For each command found, search
1021  *		Scsi_Host instance taskQ and reply to OS.
1022  *		Called only if recovering from a FW reload.
1023  *	@hd: Pointer to a SCSI HOST structure
1024  *
1025  *	Returns: None.
1026  *
1027  *	Must be called while new I/Os are being queued.
1028  */
1029 void
1030 mptscsih_flush_running_cmds(MPT_SCSI_HOST *hd)
1031 {
1032 	MPT_ADAPTER *ioc = hd->ioc;
1033 	struct scsi_cmnd *sc;
1034 	SCSIIORequest_t	*mf = NULL;
1035 	int		 ii;
1036 	int		 channel, id;
1037 
1038 	for (ii= 0; ii < ioc->req_depth; ii++) {
1039 		sc = mptscsih_getclear_scsi_lookup(ioc, ii);
1040 		if (!sc)
1041 			continue;
1042 		mf = (SCSIIORequest_t *)MPT_INDEX_2_MFPTR(ioc, ii);
1043 		if (!mf)
1044 			continue;
1045 		channel = mf->Bus;
1046 		id = mf->TargetID;
1047 		mptscsih_freeChainBuffers(ioc, ii);
1048 		mpt_free_msg_frame(ioc, (MPT_FRAME_HDR *)mf);
1049 		if ((unsigned char *)mf != sc->host_scribble)
1050 			continue;
1051 		scsi_dma_unmap(sc);
1052 		sc->result = DID_RESET << 16;
1053 		sc->host_scribble = NULL;
1054 		dtmprintk(ioc, sdev_printk(KERN_INFO, sc->device, MYIOC_s_FMT
1055 		    "completing cmds: fw_channel %d, fw_id %d, sc=%p, mf = %p, "
1056 		    "idx=%x\n", ioc->name, channel, id, sc, mf, ii));
1057 		sc->scsi_done(sc);
1058 	}
1059 }
1060 EXPORT_SYMBOL(mptscsih_flush_running_cmds);
1061 
1062 /*
1063  *	mptscsih_search_running_cmds - Delete any commands associated
1064  *		with the specified target and lun. Function called only
1065  *		when a lun is disable by mid-layer.
1066  *		Do NOT access the referenced scsi_cmnd structure or
1067  *		members. Will cause either a paging or NULL ptr error.
1068  *		(BUT, BUT, BUT, the code does reference it! - mdr)
1069  *      @hd: Pointer to a SCSI HOST structure
1070  *	@vdevice: per device private data
1071  *
1072  *	Returns: None.
1073  *
1074  *	Called from slave_destroy.
1075  */
1076 static void
1077 mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, VirtDevice *vdevice)
1078 {
1079 	SCSIIORequest_t	*mf = NULL;
1080 	int		 ii;
1081 	struct scsi_cmnd *sc;
1082 	struct scsi_lun  lun;
1083 	MPT_ADAPTER *ioc = hd->ioc;
1084 	unsigned long	flags;
1085 
1086 	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
1087 	for (ii = 0; ii < ioc->req_depth; ii++) {
1088 		if ((sc = ioc->ScsiLookup[ii]) != NULL) {
1089 
1090 			mf = (SCSIIORequest_t *)MPT_INDEX_2_MFPTR(ioc, ii);
1091 			if (mf == NULL)
1092 				continue;
1093 			/* If the device is a hidden raid component, then its
1094 			 * expected that the mf->function will be RAID_SCSI_IO
1095 			 */
1096 			if (vdevice->vtarget->tflags &
1097 			    MPT_TARGET_FLAGS_RAID_COMPONENT && mf->Function !=
1098 			    MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)
1099 				continue;
1100 
1101 			int_to_scsilun(vdevice->lun, &lun);
1102 			if ((mf->Bus != vdevice->vtarget->channel) ||
1103 			    (mf->TargetID != vdevice->vtarget->id) ||
1104 			    memcmp(lun.scsi_lun, mf->LUN, 8))
1105 				continue;
1106 
1107 			if ((unsigned char *)mf != sc->host_scribble)
1108 				continue;
1109 			ioc->ScsiLookup[ii] = NULL;
1110 			spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
1111 			mptscsih_freeChainBuffers(ioc, ii);
1112 			mpt_free_msg_frame(ioc, (MPT_FRAME_HDR *)mf);
1113 			scsi_dma_unmap(sc);
1114 			sc->host_scribble = NULL;
1115 			sc->result = DID_NO_CONNECT << 16;
1116 			dtmprintk(ioc, sdev_printk(KERN_INFO, sc->device,
1117 			   MYIOC_s_FMT "completing cmds: fw_channel %d, "
1118 			   "fw_id %d, sc=%p, mf = %p, idx=%x\n", ioc->name,
1119 			   vdevice->vtarget->channel, vdevice->vtarget->id,
1120 			   sc, mf, ii));
1121 			sc->scsi_done(sc);
1122 			spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
1123 		}
1124 	}
1125 	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
1126 	return;
1127 }
1128 
1129 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1130 
1131 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1132 /*
1133  *	mptscsih_report_queue_full - Report QUEUE_FULL status returned
1134  *	from a SCSI target device.
1135  *	@sc: Pointer to scsi_cmnd structure
1136  *	@pScsiReply: Pointer to SCSIIOReply_t
1137  *	@pScsiReq: Pointer to original SCSI request
1138  *
1139  *	This routine periodically reports QUEUE_FULL status returned from a
1140  *	SCSI target device.  It reports this to the console via kernel
1141  *	printk() API call, not more than once every 10 seconds.
1142  */
1143 static void
1144 mptscsih_report_queue_full(struct scsi_cmnd *sc, SCSIIOReply_t *pScsiReply, SCSIIORequest_t *pScsiReq)
1145 {
1146 	long time = jiffies;
1147 	MPT_SCSI_HOST		*hd;
1148 	MPT_ADAPTER	*ioc;
1149 
1150 	if (sc->device == NULL)
1151 		return;
1152 	if (sc->device->host == NULL)
1153 		return;
1154 	if ((hd = shost_priv(sc->device->host)) == NULL)
1155 		return;
1156 	ioc = hd->ioc;
1157 	if (time - hd->last_queue_full > 10 * HZ) {
1158 		dprintk(ioc, printk(MYIOC_s_WARN_FMT "Device (%d:%d:%llu) reported QUEUE_FULL!\n",
1159 				ioc->name, 0, sc->device->id, sc->device->lun));
1160 		hd->last_queue_full = time;
1161 	}
1162 }
1163 
1164 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1165 /*
1166  *	mptscsih_remove - Removed scsi devices
1167  *	@pdev: Pointer to pci_dev structure
1168  *
1169  *
1170  */
1171 void
1172 mptscsih_remove(struct pci_dev *pdev)
1173 {
1174 	MPT_ADAPTER 		*ioc = pci_get_drvdata(pdev);
1175 	struct Scsi_Host 	*host = ioc->sh;
1176 	MPT_SCSI_HOST		*hd;
1177 	int sz1;
1178 
1179 	if (host == NULL)
1180 		hd = NULL;
1181 	else
1182 		hd = shost_priv(host);
1183 
1184 	mptscsih_shutdown(pdev);
1185 
1186 	sz1=0;
1187 
1188 	if (ioc->ScsiLookup != NULL) {
1189 		sz1 = ioc->req_depth * sizeof(void *);
1190 		kfree(ioc->ScsiLookup);
1191 		ioc->ScsiLookup = NULL;
1192 	}
1193 
1194 	dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1195 	    "Free'd ScsiLookup (%d) memory\n",
1196 	    ioc->name, sz1));
1197 
1198 	if (hd)
1199 		kfree(hd->info_kbuf);
1200 
1201 	/* NULL the Scsi_Host pointer
1202 	 */
1203 	ioc->sh = NULL;
1204 
1205 	if (host)
1206 		scsi_host_put(host);
1207 	mpt_detach(pdev);
1208 
1209 }
1210 
1211 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1212 /*
1213  *	mptscsih_shutdown - reboot notifier
1214  *
1215  */
1216 void
1217 mptscsih_shutdown(struct pci_dev *pdev)
1218 {
1219 }
1220 
1221 #ifdef CONFIG_PM
1222 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1223 /*
1224  *	mptscsih_suspend - Fusion MPT scsi driver suspend routine.
1225  *
1226  *
1227  */
1228 int
1229 mptscsih_suspend(struct pci_dev *pdev, pm_message_t state)
1230 {
1231 	MPT_ADAPTER 		*ioc = pci_get_drvdata(pdev);
1232 
1233 	scsi_block_requests(ioc->sh);
1234 	flush_scheduled_work();
1235 	mptscsih_shutdown(pdev);
1236 	return mpt_suspend(pdev,state);
1237 }
1238 
1239 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1240 /*
1241  *	mptscsih_resume - Fusion MPT scsi driver resume routine.
1242  *
1243  *
1244  */
1245 int
1246 mptscsih_resume(struct pci_dev *pdev)
1247 {
1248 	MPT_ADAPTER 		*ioc = pci_get_drvdata(pdev);
1249 	int rc;
1250 
1251 	rc = mpt_resume(pdev);
1252 	scsi_unblock_requests(ioc->sh);
1253 	return rc;
1254 }
1255 
1256 #endif
1257 
1258 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1259 /**
1260  *	mptscsih_info - Return information about MPT adapter
1261  *	@SChost: Pointer to Scsi_Host structure
1262  *
1263  *	(linux scsi_host_template.info routine)
1264  *
1265  *	Returns pointer to buffer where information was written.
1266  */
1267 const char *
1268 mptscsih_info(struct Scsi_Host *SChost)
1269 {
1270 	MPT_SCSI_HOST *h;
1271 	int size = 0;
1272 
1273 	h = shost_priv(SChost);
1274 
1275 	if (h->info_kbuf == NULL)
1276 		if ((h->info_kbuf = kmalloc(0x1000 /* 4Kb */, GFP_KERNEL)) == NULL)
1277 			return h->info_kbuf;
1278 	h->info_kbuf[0] = '\0';
1279 
1280 	mpt_print_ioc_summary(h->ioc, h->info_kbuf, &size, 0, 0);
1281 	h->info_kbuf[size-1] = '\0';
1282 
1283 	return h->info_kbuf;
1284 }
1285 
1286 int mptscsih_show_info(struct seq_file *m, struct Scsi_Host *host)
1287 {
1288 	MPT_SCSI_HOST	*hd = shost_priv(host);
1289 	MPT_ADAPTER	*ioc = hd->ioc;
1290 
1291 	seq_printf(m, "%s: %s, ", ioc->name, ioc->prod_name);
1292 	seq_printf(m, "%s%08xh, ", MPT_FW_REV_MAGIC_ID_STRING, ioc->facts.FWVersion.Word);
1293 	seq_printf(m, "Ports=%d, ", ioc->facts.NumberOfPorts);
1294 	seq_printf(m, "MaxQ=%d\n", ioc->req_depth);
1295 
1296 	return 0;
1297 }
1298 
1299 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1300 #define ADD_INDEX_LOG(req_ent)	do { } while(0)
1301 
1302 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1303 /**
1304  *	mptscsih_qcmd - Primary Fusion MPT SCSI initiator IO start routine.
1305  *	@SCpnt: Pointer to scsi_cmnd structure
1306  *
1307  *	(linux scsi_host_template.queuecommand routine)
1308  *	This is the primary SCSI IO start routine.  Create a MPI SCSIIORequest
1309  *	from a linux scsi_cmnd request and send it to the IOC.
1310  *
1311  *	Returns 0. (rtn value discarded by linux scsi mid-layer)
1312  */
1313 int
1314 mptscsih_qcmd(struct scsi_cmnd *SCpnt)
1315 {
1316 	MPT_SCSI_HOST		*hd;
1317 	MPT_FRAME_HDR		*mf;
1318 	SCSIIORequest_t		*pScsiReq;
1319 	VirtDevice		*vdevice = SCpnt->device->hostdata;
1320 	u32	 datalen;
1321 	u32	 scsictl;
1322 	u32	 scsidir;
1323 	u32	 cmd_len;
1324 	int	 my_idx;
1325 	int	 ii;
1326 	MPT_ADAPTER *ioc;
1327 
1328 	hd = shost_priv(SCpnt->device->host);
1329 	ioc = hd->ioc;
1330 
1331 	dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "qcmd: SCpnt=%p\n",
1332 		ioc->name, SCpnt));
1333 
1334 	if (ioc->taskmgmt_quiesce_io)
1335 		return SCSI_MLQUEUE_HOST_BUSY;
1336 
1337 	/*
1338 	 *  Put together a MPT SCSI request...
1339 	 */
1340 	if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) {
1341 		dprintk(ioc, printk(MYIOC_s_WARN_FMT "QueueCmd, no msg frames!!\n",
1342 				ioc->name));
1343 		return SCSI_MLQUEUE_HOST_BUSY;
1344 	}
1345 
1346 	pScsiReq = (SCSIIORequest_t *) mf;
1347 
1348 	my_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
1349 
1350 	ADD_INDEX_LOG(my_idx);
1351 
1352 	/*    TUR's being issued with scsictl=0x02000000 (DATA_IN)!
1353 	 *    Seems we may receive a buffer (datalen>0) even when there
1354 	 *    will be no data transfer!  GRRRRR...
1355 	 */
1356 	if (SCpnt->sc_data_direction == DMA_FROM_DEVICE) {
1357 		datalen = scsi_bufflen(SCpnt);
1358 		scsidir = MPI_SCSIIO_CONTROL_READ;	/* DATA IN  (host<--ioc<--dev) */
1359 	} else if (SCpnt->sc_data_direction == DMA_TO_DEVICE) {
1360 		datalen = scsi_bufflen(SCpnt);
1361 		scsidir = MPI_SCSIIO_CONTROL_WRITE;	/* DATA OUT (host-->ioc-->dev) */
1362 	} else {
1363 		datalen = 0;
1364 		scsidir = MPI_SCSIIO_CONTROL_NODATATRANSFER;
1365 	}
1366 
1367 	/* Default to untagged. Once a target structure has been allocated,
1368 	 * use the Inquiry data to determine if device supports tagged.
1369 	 */
1370 	if ((vdevice->vtarget->tflags & MPT_TARGET_FLAGS_Q_YES) &&
1371 	    SCpnt->device->tagged_supported)
1372 		scsictl = scsidir | MPI_SCSIIO_CONTROL_SIMPLEQ;
1373 	else
1374 		scsictl = scsidir | MPI_SCSIIO_CONTROL_UNTAGGED;
1375 
1376 
1377 	/* Use the above information to set up the message frame
1378 	 */
1379 	pScsiReq->TargetID = (u8) vdevice->vtarget->id;
1380 	pScsiReq->Bus = vdevice->vtarget->channel;
1381 	pScsiReq->ChainOffset = 0;
1382 	if (vdevice->vtarget->tflags &  MPT_TARGET_FLAGS_RAID_COMPONENT)
1383 		pScsiReq->Function = MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH;
1384 	else
1385 		pScsiReq->Function = MPI_FUNCTION_SCSI_IO_REQUEST;
1386 	pScsiReq->CDBLength = SCpnt->cmd_len;
1387 	pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE;
1388 	pScsiReq->Reserved = 0;
1389 	pScsiReq->MsgFlags = mpt_msg_flags(ioc);
1390 	int_to_scsilun(SCpnt->device->lun, (struct scsi_lun *)pScsiReq->LUN);
1391 	pScsiReq->Control = cpu_to_le32(scsictl);
1392 
1393 	/*
1394 	 *  Write SCSI CDB into the message
1395 	 */
1396 	cmd_len = SCpnt->cmd_len;
1397 	for (ii=0; ii < cmd_len; ii++)
1398 		pScsiReq->CDB[ii] = SCpnt->cmnd[ii];
1399 
1400 	for (ii=cmd_len; ii < 16; ii++)
1401 		pScsiReq->CDB[ii] = 0;
1402 
1403 	/* DataLength */
1404 	pScsiReq->DataLength = cpu_to_le32(datalen);
1405 
1406 	/* SenseBuffer low address */
1407 	pScsiReq->SenseBufferLowAddr = cpu_to_le32(ioc->sense_buf_low_dma
1408 					   + (my_idx * MPT_SENSE_BUFFER_ALLOC));
1409 
1410 	/* Now add the SG list
1411 	 * Always have a SGE even if null length.
1412 	 */
1413 	if (datalen == 0) {
1414 		/* Add a NULL SGE */
1415 		ioc->add_sge((char *)&pScsiReq->SGL,
1416 			MPT_SGE_FLAGS_SSIMPLE_READ | 0,
1417 			(dma_addr_t) -1);
1418 	} else {
1419 		/* Add a 32 or 64 bit SGE */
1420 		if (mptscsih_AddSGE(ioc, SCpnt, pScsiReq, my_idx) != SUCCESS)
1421 			goto fail;
1422 	}
1423 
1424 	SCpnt->host_scribble = (unsigned char *)mf;
1425 	mptscsih_set_scsi_lookup(ioc, my_idx, SCpnt);
1426 
1427 	mpt_put_msg_frame(ioc->DoneCtx, ioc, mf);
1428 	dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Issued SCSI cmd (%p) mf=%p idx=%d\n",
1429 			ioc->name, SCpnt, mf, my_idx));
1430 	DBG_DUMP_REQUEST_FRAME(ioc, (u32 *)mf);
1431 	return 0;
1432 
1433  fail:
1434 	mptscsih_freeChainBuffers(ioc, my_idx);
1435 	mpt_free_msg_frame(ioc, mf);
1436 	return SCSI_MLQUEUE_HOST_BUSY;
1437 }
1438 
1439 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1440 /*
1441  *	mptscsih_freeChainBuffers - Function to free chain buffers associated
1442  *	with a SCSI IO request
1443  *	@hd: Pointer to the MPT_SCSI_HOST instance
1444  *	@req_idx: Index of the SCSI IO request frame.
1445  *
1446  *	Called if SG chain buffer allocation fails and mptscsih callbacks.
1447  *	No return.
1448  */
1449 static void
1450 mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx)
1451 {
1452 	MPT_FRAME_HDR *chain;
1453 	unsigned long flags;
1454 	int chain_idx;
1455 	int next;
1456 
1457 	/* Get the first chain index and reset
1458 	 * tracker state.
1459 	 */
1460 	chain_idx = ioc->ReqToChain[req_idx];
1461 	ioc->ReqToChain[req_idx] = MPT_HOST_NO_CHAIN;
1462 
1463 	while (chain_idx != MPT_HOST_NO_CHAIN) {
1464 
1465 		/* Save the next chain buffer index */
1466 		next = ioc->ChainToChain[chain_idx];
1467 
1468 		/* Free this chain buffer and reset
1469 		 * tracker
1470 		 */
1471 		ioc->ChainToChain[chain_idx] = MPT_HOST_NO_CHAIN;
1472 
1473 		chain = (MPT_FRAME_HDR *) (ioc->ChainBuffer
1474 					+ (chain_idx * ioc->req_sz));
1475 
1476 		spin_lock_irqsave(&ioc->FreeQlock, flags);
1477 		list_add_tail(&chain->u.frame.linkage.list, &ioc->FreeChainQ);
1478 		spin_unlock_irqrestore(&ioc->FreeQlock, flags);
1479 
1480 		dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FreeChainBuffers (index %d)\n",
1481 				ioc->name, chain_idx));
1482 
1483 		/* handle next */
1484 		chain_idx = next;
1485 	}
1486 	return;
1487 }
1488 
1489 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1490 /*
1491  *	Reset Handling
1492  */
1493 
1494 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1495 /**
1496  *	mptscsih_IssueTaskMgmt - Generic send Task Management function.
1497  *	@hd: Pointer to MPT_SCSI_HOST structure
1498  *	@type: Task Management type
1499  *	@channel: channel number for task management
1500  *	@id: Logical Target ID for reset (if appropriate)
1501  *	@lun: Logical Unit for reset (if appropriate)
1502  *	@ctx2abort: Context for the task to be aborted (if appropriate)
1503  *	@timeout: timeout for task management control
1504  *
1505  *	Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
1506  *	or a non-interrupt thread.  In the former, must not call schedule().
1507  *
1508  *	Not all fields are meaningfull for all task types.
1509  *
1510  *	Returns 0 for SUCCESS, or FAILED.
1511  *
1512  **/
1513 int
1514 mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, u64 lun,
1515 	int ctx2abort, ulong timeout)
1516 {
1517 	MPT_FRAME_HDR	*mf;
1518 	SCSITaskMgmt_t	*pScsiTm;
1519 	int		 ii;
1520 	int		 retval;
1521 	MPT_ADAPTER 	*ioc = hd->ioc;
1522 	u8		 issue_hard_reset;
1523 	u32		 ioc_raw_state;
1524 	unsigned long	 time_count;
1525 
1526 	issue_hard_reset = 0;
1527 	ioc_raw_state = mpt_GetIocState(ioc, 0);
1528 
1529 	if ((ioc_raw_state & MPI_IOC_STATE_MASK) != MPI_IOC_STATE_OPERATIONAL) {
1530 		printk(MYIOC_s_WARN_FMT
1531 			"TaskMgmt type=%x: IOC Not operational (0x%x)!\n",
1532 			ioc->name, type, ioc_raw_state);
1533 		printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n",
1534 		    ioc->name, __func__);
1535 		if (mpt_HardResetHandler(ioc, CAN_SLEEP) < 0)
1536 			printk(MYIOC_s_WARN_FMT "TaskMgmt HardReset "
1537 			    "FAILED!!\n", ioc->name);
1538 		return 0;
1539 	}
1540 
1541 	/* DOORBELL ACTIVE check is not required if
1542 	*  MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q is supported.
1543 	*/
1544 
1545 	if (!((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q)
1546 		 && (ioc->facts.MsgVersion >= MPI_VERSION_01_05)) &&
1547 		(ioc_raw_state & MPI_DOORBELL_ACTIVE)) {
1548 		printk(MYIOC_s_WARN_FMT
1549 			"TaskMgmt type=%x: ioc_state: "
1550 			"DOORBELL_ACTIVE (0x%x)!\n",
1551 			ioc->name, type, ioc_raw_state);
1552 		return FAILED;
1553 	}
1554 
1555 	mutex_lock(&ioc->taskmgmt_cmds.mutex);
1556 	if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) {
1557 		mf = NULL;
1558 		retval = FAILED;
1559 		goto out;
1560 	}
1561 
1562 	/* Return Fail to calling function if no message frames available.
1563 	 */
1564 	if ((mf = mpt_get_msg_frame(ioc->TaskCtx, ioc)) == NULL) {
1565 		dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
1566 			"TaskMgmt no msg frames!!\n", ioc->name));
1567 		retval = FAILED;
1568 		mpt_clear_taskmgmt_in_progress_flag(ioc);
1569 		goto out;
1570 	}
1571 	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request (mf=%p)\n",
1572 			ioc->name, mf));
1573 
1574 	/* Format the Request
1575 	 */
1576 	pScsiTm = (SCSITaskMgmt_t *) mf;
1577 	pScsiTm->TargetID = id;
1578 	pScsiTm->Bus = channel;
1579 	pScsiTm->ChainOffset = 0;
1580 	pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT;
1581 
1582 	pScsiTm->Reserved = 0;
1583 	pScsiTm->TaskType = type;
1584 	pScsiTm->Reserved1 = 0;
1585 	pScsiTm->MsgFlags = (type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS)
1586                     ? MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION : 0;
1587 
1588 	int_to_scsilun(lun, (struct scsi_lun *)pScsiTm->LUN);
1589 
1590 	for (ii=0; ii < 7; ii++)
1591 		pScsiTm->Reserved2[ii] = 0;
1592 
1593 	pScsiTm->TaskMsgContext = ctx2abort;
1594 
1595 	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt: ctx2abort (0x%08x) "
1596 		"task_type = 0x%02X, timeout = %ld\n", ioc->name, ctx2abort,
1597 		type, timeout));
1598 
1599 	DBG_DUMP_TM_REQUEST_FRAME(ioc, (u32 *)pScsiTm);
1600 
1601 	INITIALIZE_MGMT_STATUS(ioc->taskmgmt_cmds.status)
1602 	time_count = jiffies;
1603 	if ((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) &&
1604 	    (ioc->facts.MsgVersion >= MPI_VERSION_01_05))
1605 		mpt_put_msg_frame_hi_pri(ioc->TaskCtx, ioc, mf);
1606 	else {
1607 		retval = mpt_send_handshake_request(ioc->TaskCtx, ioc,
1608 			sizeof(SCSITaskMgmt_t), (u32*)pScsiTm, CAN_SLEEP);
1609 		if (retval) {
1610 			dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
1611 				"TaskMgmt handshake FAILED!(mf=%p, rc=%d) \n",
1612 				ioc->name, mf, retval));
1613 			mpt_free_msg_frame(ioc, mf);
1614 			mpt_clear_taskmgmt_in_progress_flag(ioc);
1615 			goto out;
1616 		}
1617 	}
1618 
1619 	wait_for_completion_timeout(&ioc->taskmgmt_cmds.done,
1620 		timeout*HZ);
1621 	if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
1622 		retval = FAILED;
1623 		dtmprintk(ioc, printk(MYIOC_s_ERR_FMT
1624 		    "TaskMgmt TIMED OUT!(mf=%p)\n", ioc->name, mf));
1625 		mpt_clear_taskmgmt_in_progress_flag(ioc);
1626 		if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
1627 			goto out;
1628 		issue_hard_reset = 1;
1629 		goto out;
1630 	}
1631 
1632 	retval = mptscsih_taskmgmt_reply(ioc, type,
1633 	    (SCSITaskMgmtReply_t *) ioc->taskmgmt_cmds.reply);
1634 
1635 	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1636 	    "TaskMgmt completed (%d seconds)\n",
1637 	    ioc->name, jiffies_to_msecs(jiffies - time_count)/1000));
1638 
1639  out:
1640 
1641 	CLEAR_MGMT_STATUS(ioc->taskmgmt_cmds.status)
1642 	if (issue_hard_reset) {
1643 		printk(MYIOC_s_WARN_FMT
1644 		       "Issuing Reset from %s!! doorbell=0x%08x\n",
1645 		       ioc->name, __func__, mpt_GetIocState(ioc, 0));
1646 		retval = (ioc->bus_type == SAS) ?
1647 			mpt_HardResetHandler(ioc, CAN_SLEEP) :
1648 			mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
1649 		mpt_free_msg_frame(ioc, mf);
1650 	}
1651 
1652 	retval = (retval == 0) ? 0 : FAILED;
1653 	mutex_unlock(&ioc->taskmgmt_cmds.mutex);
1654 	return retval;
1655 }
1656 EXPORT_SYMBOL(mptscsih_IssueTaskMgmt);
1657 
1658 static int
1659 mptscsih_get_tm_timeout(MPT_ADAPTER *ioc)
1660 {
1661 	switch (ioc->bus_type) {
1662 	case FC:
1663 		return 40;
1664 	case SAS:
1665 		return 30;
1666 	case SPI:
1667 	default:
1668 		return 10;
1669 	}
1670 }
1671 
1672 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1673 /**
1674  *	mptscsih_abort - Abort linux scsi_cmnd routine, new_eh variant
1675  *	@SCpnt: Pointer to scsi_cmnd structure, IO to be aborted
1676  *
1677  *	(linux scsi_host_template.eh_abort_handler routine)
1678  *
1679  *	Returns SUCCESS or FAILED.
1680  **/
1681 int
1682 mptscsih_abort(struct scsi_cmnd * SCpnt)
1683 {
1684 	MPT_SCSI_HOST	*hd;
1685 	MPT_FRAME_HDR	*mf;
1686 	u32		 ctx2abort;
1687 	int		 scpnt_idx;
1688 	int		 retval;
1689 	VirtDevice	 *vdevice;
1690 	MPT_ADAPTER	*ioc;
1691 
1692 	/* If we can't locate our host adapter structure, return FAILED status.
1693 	 */
1694 	if ((hd = shost_priv(SCpnt->device->host)) == NULL) {
1695 		SCpnt->result = DID_RESET << 16;
1696 		SCpnt->scsi_done(SCpnt);
1697 		printk(KERN_ERR MYNAM ": task abort: "
1698 		    "can't locate host! (sc=%p)\n", SCpnt);
1699 		return FAILED;
1700 	}
1701 
1702 	ioc = hd->ioc;
1703 	printk(MYIOC_s_INFO_FMT "attempting task abort! (sc=%p)\n",
1704 	       ioc->name, SCpnt);
1705 	scsi_print_command(SCpnt);
1706 
1707 	vdevice = SCpnt->device->hostdata;
1708 	if (!vdevice || !vdevice->vtarget) {
1709 		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1710 		    "task abort: device has been deleted (sc=%p)\n",
1711 		    ioc->name, SCpnt));
1712 		SCpnt->result = DID_NO_CONNECT << 16;
1713 		SCpnt->scsi_done(SCpnt);
1714 		retval = SUCCESS;
1715 		goto out;
1716 	}
1717 
1718 	/* Task aborts are not supported for hidden raid components.
1719 	 */
1720 	if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) {
1721 		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1722 		    "task abort: hidden raid component (sc=%p)\n",
1723 		    ioc->name, SCpnt));
1724 		SCpnt->result = DID_RESET << 16;
1725 		retval = FAILED;
1726 		goto out;
1727 	}
1728 
1729 	/* Task aborts are not supported for volumes.
1730 	 */
1731 	if (vdevice->vtarget->raidVolume) {
1732 		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1733 		    "task abort: raid volume (sc=%p)\n",
1734 		    ioc->name, SCpnt));
1735 		SCpnt->result = DID_RESET << 16;
1736 		retval = FAILED;
1737 		goto out;
1738 	}
1739 
1740 	/* Find this command
1741 	 */
1742 	if ((scpnt_idx = SCPNT_TO_LOOKUP_IDX(ioc, SCpnt)) < 0) {
1743 		/* Cmd not found in ScsiLookup.
1744 		 * Do OS callback.
1745 		 */
1746 		SCpnt->result = DID_RESET << 16;
1747 		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "task abort: "
1748 		   "Command not in the active list! (sc=%p)\n", ioc->name,
1749 		   SCpnt));
1750 		retval = SUCCESS;
1751 		goto out;
1752 	}
1753 
1754 	if (ioc->timeouts < -1)
1755 		ioc->timeouts++;
1756 
1757 	if (mpt_fwfault_debug)
1758 		mpt_halt_firmware(ioc);
1759 
1760 	/* Most important!  Set TaskMsgContext to SCpnt's MsgContext!
1761 	 * (the IO to be ABORT'd)
1762 	 *
1763 	 * NOTE: Since we do not byteswap MsgContext, we do not
1764 	 *	 swap it here either.  It is an opaque cookie to
1765 	 *	 the controller, so it does not matter. -DaveM
1766 	 */
1767 	mf = MPT_INDEX_2_MFPTR(ioc, scpnt_idx);
1768 	ctx2abort = mf->u.frame.hwhdr.msgctxu.MsgContext;
1769 	retval = mptscsih_IssueTaskMgmt(hd,
1770 			 MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
1771 			 vdevice->vtarget->channel,
1772 			 vdevice->vtarget->id, vdevice->lun,
1773 			 ctx2abort, mptscsih_get_tm_timeout(ioc));
1774 
1775 	if (SCPNT_TO_LOOKUP_IDX(ioc, SCpnt) == scpnt_idx) {
1776 		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1777 		    "task abort: command still in active list! (sc=%p)\n",
1778 		    ioc->name, SCpnt));
1779 		retval = FAILED;
1780 	} else {
1781 		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1782 		    "task abort: command cleared from active list! (sc=%p)\n",
1783 		    ioc->name, SCpnt));
1784 		retval = SUCCESS;
1785 	}
1786 
1787  out:
1788 	printk(MYIOC_s_INFO_FMT "task abort: %s (rv=%04x) (sc=%p)\n",
1789 	    ioc->name, ((retval == SUCCESS) ? "SUCCESS" : "FAILED"), retval,
1790 	    SCpnt);
1791 
1792 	return retval;
1793 }
1794 
1795 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1796 /**
1797  *	mptscsih_dev_reset - Perform a SCSI TARGET_RESET!  new_eh variant
1798  *	@SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to
1799  *
1800  *	(linux scsi_host_template.eh_dev_reset_handler routine)
1801  *
1802  *	Returns SUCCESS or FAILED.
1803  **/
1804 int
1805 mptscsih_dev_reset(struct scsi_cmnd * SCpnt)
1806 {
1807 	MPT_SCSI_HOST	*hd;
1808 	int		 retval;
1809 	VirtDevice	 *vdevice;
1810 	MPT_ADAPTER	*ioc;
1811 
1812 	/* If we can't locate our host adapter structure, return FAILED status.
1813 	 */
1814 	if ((hd = shost_priv(SCpnt->device->host)) == NULL){
1815 		printk(KERN_ERR MYNAM ": target reset: "
1816 		   "Can't locate host! (sc=%p)\n", SCpnt);
1817 		return FAILED;
1818 	}
1819 
1820 	ioc = hd->ioc;
1821 	printk(MYIOC_s_INFO_FMT "attempting target reset! (sc=%p)\n",
1822 	       ioc->name, SCpnt);
1823 	scsi_print_command(SCpnt);
1824 
1825 	vdevice = SCpnt->device->hostdata;
1826 	if (!vdevice || !vdevice->vtarget) {
1827 		retval = 0;
1828 		goto out;
1829 	}
1830 
1831 	/* Target reset to hidden raid component is not supported
1832 	 */
1833 	if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) {
1834 		retval = FAILED;
1835 		goto out;
1836 	}
1837 
1838 	retval = mptscsih_IssueTaskMgmt(hd,
1839 				MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
1840 				vdevice->vtarget->channel,
1841 				vdevice->vtarget->id, 0, 0,
1842 				mptscsih_get_tm_timeout(ioc));
1843 
1844  out:
1845 	printk (MYIOC_s_INFO_FMT "target reset: %s (sc=%p)\n",
1846 	    ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
1847 
1848 	if (retval == 0)
1849 		return SUCCESS;
1850 	else
1851 		return FAILED;
1852 }
1853 
1854 
1855 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1856 /**
1857  *	mptscsih_bus_reset - Perform a SCSI BUS_RESET!	new_eh variant
1858  *	@SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to
1859  *
1860  *	(linux scsi_host_template.eh_bus_reset_handler routine)
1861  *
1862  *	Returns SUCCESS or FAILED.
1863  **/
1864 int
1865 mptscsih_bus_reset(struct scsi_cmnd * SCpnt)
1866 {
1867 	MPT_SCSI_HOST	*hd;
1868 	int		 retval;
1869 	VirtDevice	 *vdevice;
1870 	MPT_ADAPTER	*ioc;
1871 
1872 	/* If we can't locate our host adapter structure, return FAILED status.
1873 	 */
1874 	if ((hd = shost_priv(SCpnt->device->host)) == NULL){
1875 		printk(KERN_ERR MYNAM ": bus reset: "
1876 		   "Can't locate host! (sc=%p)\n", SCpnt);
1877 		return FAILED;
1878 	}
1879 
1880 	ioc = hd->ioc;
1881 	printk(MYIOC_s_INFO_FMT "attempting bus reset! (sc=%p)\n",
1882 	       ioc->name, SCpnt);
1883 	scsi_print_command(SCpnt);
1884 
1885 	if (ioc->timeouts < -1)
1886 		ioc->timeouts++;
1887 
1888 	vdevice = SCpnt->device->hostdata;
1889 	if (!vdevice || !vdevice->vtarget)
1890 		return SUCCESS;
1891 	retval = mptscsih_IssueTaskMgmt(hd,
1892 					MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
1893 					vdevice->vtarget->channel, 0, 0, 0,
1894 					mptscsih_get_tm_timeout(ioc));
1895 
1896 	printk(MYIOC_s_INFO_FMT "bus reset: %s (sc=%p)\n",
1897 	    ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
1898 
1899 	if (retval == 0)
1900 		return SUCCESS;
1901 	else
1902 		return FAILED;
1903 }
1904 
1905 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1906 /**
1907  *	mptscsih_host_reset - Perform a SCSI host adapter RESET (new_eh variant)
1908  *	@SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to
1909  *
1910  *	(linux scsi_host_template.eh_host_reset_handler routine)
1911  *
1912  *	Returns SUCCESS or FAILED.
1913  */
1914 int
1915 mptscsih_host_reset(struct scsi_cmnd *SCpnt)
1916 {
1917 	MPT_SCSI_HOST *  hd;
1918 	int              status = SUCCESS;
1919 	MPT_ADAPTER	*ioc;
1920 	int		retval;
1921 
1922 	/*  If we can't locate the host to reset, then we failed. */
1923 	if ((hd = shost_priv(SCpnt->device->host)) == NULL){
1924 		printk(KERN_ERR MYNAM ": host reset: "
1925 		    "Can't locate host! (sc=%p)\n", SCpnt);
1926 		return FAILED;
1927 	}
1928 
1929 	/* make sure we have no outstanding commands at this stage */
1930 	mptscsih_flush_running_cmds(hd);
1931 
1932 	ioc = hd->ioc;
1933 	printk(MYIOC_s_INFO_FMT "attempting host reset! (sc=%p)\n",
1934 	    ioc->name, SCpnt);
1935 
1936 	/*  If our attempts to reset the host failed, then return a failed
1937 	 *  status.  The host will be taken off line by the SCSI mid-layer.
1938 	 */
1939 	retval = mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
1940 	if (retval < 0)
1941 		status = FAILED;
1942 	else
1943 		status = SUCCESS;
1944 
1945 	printk(MYIOC_s_INFO_FMT "host reset: %s (sc=%p)\n",
1946 	    ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
1947 
1948 	return status;
1949 }
1950 
1951 static int
1952 mptscsih_taskmgmt_reply(MPT_ADAPTER *ioc, u8 type,
1953 	SCSITaskMgmtReply_t *pScsiTmReply)
1954 {
1955 	u16			 iocstatus;
1956 	u32			 termination_count;
1957 	int			 retval;
1958 
1959 	if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
1960 		retval = FAILED;
1961 		goto out;
1962 	}
1963 
1964 	DBG_DUMP_TM_REPLY_FRAME(ioc, (u32 *)pScsiTmReply);
1965 
1966 	iocstatus = le16_to_cpu(pScsiTmReply->IOCStatus) & MPI_IOCSTATUS_MASK;
1967 	termination_count = le32_to_cpu(pScsiTmReply->TerminationCount);
1968 
1969 	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1970 	    "TaskMgmt fw_channel = %d, fw_id = %d, task_type = 0x%02X,\n"
1971 	    "\tiocstatus = 0x%04X, loginfo = 0x%08X, response_code = 0x%02X,\n"
1972 	    "\tterm_cmnds = %d\n", ioc->name, pScsiTmReply->Bus,
1973 	    pScsiTmReply->TargetID, type, le16_to_cpu(pScsiTmReply->IOCStatus),
1974 	    le32_to_cpu(pScsiTmReply->IOCLogInfo), pScsiTmReply->ResponseCode,
1975 	    termination_count));
1976 
1977 	if (ioc->facts.MsgVersion >= MPI_VERSION_01_05 &&
1978 	    pScsiTmReply->ResponseCode)
1979 		mptscsih_taskmgmt_response_code(ioc,
1980 		    pScsiTmReply->ResponseCode);
1981 
1982 	if (iocstatus == MPI_IOCSTATUS_SUCCESS) {
1983 		retval = 0;
1984 		goto out;
1985 	}
1986 
1987 	retval = FAILED;
1988 	if (type == MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK) {
1989 		if (termination_count == 1)
1990 			retval = 0;
1991 		goto out;
1992 	}
1993 
1994 	if (iocstatus == MPI_IOCSTATUS_SCSI_TASK_TERMINATED ||
1995 	   iocstatus == MPI_IOCSTATUS_SCSI_IOC_TERMINATED)
1996 		retval = 0;
1997 
1998  out:
1999 	return retval;
2000 }
2001 
2002 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2003 void
2004 mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code)
2005 {
2006 	char *desc;
2007 
2008 	switch (response_code) {
2009 	case MPI_SCSITASKMGMT_RSP_TM_COMPLETE:
2010 		desc = "The task completed.";
2011 		break;
2012 	case MPI_SCSITASKMGMT_RSP_INVALID_FRAME:
2013 		desc = "The IOC received an invalid frame status.";
2014 		break;
2015 	case MPI_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED:
2016 		desc = "The task type is not supported.";
2017 		break;
2018 	case MPI_SCSITASKMGMT_RSP_TM_FAILED:
2019 		desc = "The requested task failed.";
2020 		break;
2021 	case MPI_SCSITASKMGMT_RSP_TM_SUCCEEDED:
2022 		desc = "The task completed successfully.";
2023 		break;
2024 	case MPI_SCSITASKMGMT_RSP_TM_INVALID_LUN:
2025 		desc = "The LUN request is invalid.";
2026 		break;
2027 	case MPI_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC:
2028 		desc = "The task is in the IOC queue and has not been sent to target.";
2029 		break;
2030 	default:
2031 		desc = "unknown";
2032 		break;
2033 	}
2034 	printk(MYIOC_s_INFO_FMT "Response Code(0x%08x): F/W: %s\n",
2035 		ioc->name, response_code, desc);
2036 }
2037 EXPORT_SYMBOL(mptscsih_taskmgmt_response_code);
2038 
2039 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2040 /**
2041  *	mptscsih_taskmgmt_complete - Registered with Fusion MPT base driver
2042  *	@ioc: Pointer to MPT_ADAPTER structure
2043  *	@mf: Pointer to SCSI task mgmt request frame
2044  *	@mr: Pointer to SCSI task mgmt reply frame
2045  *
2046  *	This routine is called from mptbase.c::mpt_interrupt() at the completion
2047  *	of any SCSI task management request.
2048  *	This routine is registered with the MPT (base) driver at driver
2049  *	load/init time via the mpt_register() API call.
2050  *
2051  *	Returns 1 indicating alloc'd request frame ptr should be freed.
2052  **/
2053 int
2054 mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf,
2055 	MPT_FRAME_HDR *mr)
2056 {
2057 	dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2058 		"TaskMgmt completed (mf=%p, mr=%p)\n", ioc->name, mf, mr));
2059 
2060 	ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
2061 
2062 	if (!mr)
2063 		goto out;
2064 
2065 	ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
2066 	memcpy(ioc->taskmgmt_cmds.reply, mr,
2067 	    min(MPT_DEFAULT_FRAME_SIZE, 4 * mr->u.reply.MsgLength));
2068  out:
2069 	if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
2070 		mpt_clear_taskmgmt_in_progress_flag(ioc);
2071 		ioc->taskmgmt_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
2072 		complete(&ioc->taskmgmt_cmds.done);
2073 		if (ioc->bus_type == SAS)
2074 			ioc->schedule_target_reset(ioc);
2075 		return 1;
2076 	}
2077 	return 0;
2078 }
2079 
2080 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2081 /*
2082  *	This is anyones guess quite frankly.
2083  */
2084 int
2085 mptscsih_bios_param(struct scsi_device * sdev, struct block_device *bdev,
2086 		sector_t capacity, int geom[])
2087 {
2088 	int		heads;
2089 	int		sectors;
2090 	sector_t	cylinders;
2091 	ulong 		dummy;
2092 
2093 	heads = 64;
2094 	sectors = 32;
2095 
2096 	dummy = heads * sectors;
2097 	cylinders = capacity;
2098 	sector_div(cylinders,dummy);
2099 
2100 	/*
2101 	 * Handle extended translation size for logical drives
2102 	 * > 1Gb
2103 	 */
2104 	if ((ulong)capacity >= 0x200000) {
2105 		heads = 255;
2106 		sectors = 63;
2107 		dummy = heads * sectors;
2108 		cylinders = capacity;
2109 		sector_div(cylinders,dummy);
2110 	}
2111 
2112 	/* return result */
2113 	geom[0] = heads;
2114 	geom[1] = sectors;
2115 	geom[2] = cylinders;
2116 
2117 	return 0;
2118 }
2119 
2120 /* Search IOC page 3 to determine if this is hidden physical disk
2121  *
2122  */
2123 int
2124 mptscsih_is_phys_disk(MPT_ADAPTER *ioc, u8 channel, u8 id)
2125 {
2126 	struct inactive_raid_component_info *component_info;
2127 	int i, j;
2128 	RaidPhysDiskPage1_t *phys_disk;
2129 	int rc = 0;
2130 	int num_paths;
2131 
2132 	if (!ioc->raid_data.pIocPg3)
2133 		goto out;
2134 	for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
2135 		if ((id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID) &&
2136 		    (channel == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskBus)) {
2137 			rc = 1;
2138 			goto out;
2139 		}
2140 	}
2141 
2142 	if (ioc->bus_type != SAS)
2143 		goto out;
2144 
2145 	/*
2146 	 * Check if dual path
2147 	 */
2148 	for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
2149 		num_paths = mpt_raid_phys_disk_get_num_paths(ioc,
2150 		    ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum);
2151 		if (num_paths < 2)
2152 			continue;
2153 		phys_disk = kzalloc(offsetof(RaidPhysDiskPage1_t, Path) +
2154 		   (num_paths * sizeof(RAID_PHYS_DISK1_PATH)), GFP_KERNEL);
2155 		if (!phys_disk)
2156 			continue;
2157 		if ((mpt_raid_phys_disk_pg1(ioc,
2158 		    ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum,
2159 		    phys_disk))) {
2160 			kfree(phys_disk);
2161 			continue;
2162 		}
2163 		for (j = 0; j < num_paths; j++) {
2164 			if ((phys_disk->Path[j].Flags &
2165 			    MPI_RAID_PHYSDISK1_FLAG_INVALID))
2166 				continue;
2167 			if ((phys_disk->Path[j].Flags &
2168 			    MPI_RAID_PHYSDISK1_FLAG_BROKEN))
2169 				continue;
2170 			if ((id == phys_disk->Path[j].PhysDiskID) &&
2171 			    (channel == phys_disk->Path[j].PhysDiskBus)) {
2172 				rc = 1;
2173 				kfree(phys_disk);
2174 				goto out;
2175 			}
2176 		}
2177 		kfree(phys_disk);
2178 	}
2179 
2180 
2181 	/*
2182 	 * Check inactive list for matching phys disks
2183 	 */
2184 	if (list_empty(&ioc->raid_data.inactive_list))
2185 		goto out;
2186 
2187 	mutex_lock(&ioc->raid_data.inactive_list_mutex);
2188 	list_for_each_entry(component_info, &ioc->raid_data.inactive_list,
2189 	    list) {
2190 		if ((component_info->d.PhysDiskID == id) &&
2191 		    (component_info->d.PhysDiskBus == channel))
2192 			rc = 1;
2193 	}
2194 	mutex_unlock(&ioc->raid_data.inactive_list_mutex);
2195 
2196  out:
2197 	return rc;
2198 }
2199 EXPORT_SYMBOL(mptscsih_is_phys_disk);
2200 
2201 u8
2202 mptscsih_raid_id_to_num(MPT_ADAPTER *ioc, u8 channel, u8 id)
2203 {
2204 	struct inactive_raid_component_info *component_info;
2205 	int i, j;
2206 	RaidPhysDiskPage1_t *phys_disk;
2207 	int rc = -ENXIO;
2208 	int num_paths;
2209 
2210 	if (!ioc->raid_data.pIocPg3)
2211 		goto out;
2212 	for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
2213 		if ((id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID) &&
2214 		    (channel == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskBus)) {
2215 			rc = ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum;
2216 			goto out;
2217 		}
2218 	}
2219 
2220 	if (ioc->bus_type != SAS)
2221 		goto out;
2222 
2223 	/*
2224 	 * Check if dual path
2225 	 */
2226 	for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
2227 		num_paths = mpt_raid_phys_disk_get_num_paths(ioc,
2228 		    ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum);
2229 		if (num_paths < 2)
2230 			continue;
2231 		phys_disk = kzalloc(offsetof(RaidPhysDiskPage1_t, Path) +
2232 		   (num_paths * sizeof(RAID_PHYS_DISK1_PATH)), GFP_KERNEL);
2233 		if (!phys_disk)
2234 			continue;
2235 		if ((mpt_raid_phys_disk_pg1(ioc,
2236 		    ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum,
2237 		    phys_disk))) {
2238 			kfree(phys_disk);
2239 			continue;
2240 		}
2241 		for (j = 0; j < num_paths; j++) {
2242 			if ((phys_disk->Path[j].Flags &
2243 			    MPI_RAID_PHYSDISK1_FLAG_INVALID))
2244 				continue;
2245 			if ((phys_disk->Path[j].Flags &
2246 			    MPI_RAID_PHYSDISK1_FLAG_BROKEN))
2247 				continue;
2248 			if ((id == phys_disk->Path[j].PhysDiskID) &&
2249 			    (channel == phys_disk->Path[j].PhysDiskBus)) {
2250 				rc = phys_disk->PhysDiskNum;
2251 				kfree(phys_disk);
2252 				goto out;
2253 			}
2254 		}
2255 		kfree(phys_disk);
2256 	}
2257 
2258 	/*
2259 	 * Check inactive list for matching phys disks
2260 	 */
2261 	if (list_empty(&ioc->raid_data.inactive_list))
2262 		goto out;
2263 
2264 	mutex_lock(&ioc->raid_data.inactive_list_mutex);
2265 	list_for_each_entry(component_info, &ioc->raid_data.inactive_list,
2266 	    list) {
2267 		if ((component_info->d.PhysDiskID == id) &&
2268 		    (component_info->d.PhysDiskBus == channel))
2269 			rc = component_info->d.PhysDiskNum;
2270 	}
2271 	mutex_unlock(&ioc->raid_data.inactive_list_mutex);
2272 
2273  out:
2274 	return rc;
2275 }
2276 EXPORT_SYMBOL(mptscsih_raid_id_to_num);
2277 
2278 /*
2279  *	OS entry point to allow for host driver to free allocated memory
2280  *	Called if no device present or device being unloaded
2281  */
2282 void
2283 mptscsih_slave_destroy(struct scsi_device *sdev)
2284 {
2285 	struct Scsi_Host	*host = sdev->host;
2286 	MPT_SCSI_HOST		*hd = shost_priv(host);
2287 	VirtTarget		*vtarget;
2288 	VirtDevice		*vdevice;
2289 	struct scsi_target 	*starget;
2290 
2291 	starget = scsi_target(sdev);
2292 	vtarget = starget->hostdata;
2293 	vdevice = sdev->hostdata;
2294 	if (!vdevice)
2295 		return;
2296 
2297 	mptscsih_search_running_cmds(hd, vdevice);
2298 	vtarget->num_luns--;
2299 	mptscsih_synchronize_cache(hd, vdevice);
2300 	kfree(vdevice);
2301 	sdev->hostdata = NULL;
2302 }
2303 
2304 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2305 /*
2306  *	mptscsih_change_queue_depth - This function will set a devices queue depth
2307  *	@sdev: per scsi_device pointer
2308  *	@qdepth: requested queue depth
2309  *
2310  *	Adding support for new 'change_queue_depth' api.
2311 */
2312 int
2313 mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
2314 {
2315 	MPT_SCSI_HOST		*hd = shost_priv(sdev->host);
2316 	VirtTarget 		*vtarget;
2317 	struct scsi_target 	*starget;
2318 	int			max_depth;
2319 	MPT_ADAPTER		*ioc = hd->ioc;
2320 
2321 	starget = scsi_target(sdev);
2322 	vtarget = starget->hostdata;
2323 
2324 	if (ioc->bus_type == SPI) {
2325 		if (!(vtarget->tflags & MPT_TARGET_FLAGS_Q_YES))
2326 			max_depth = 1;
2327 		else if (sdev->type == TYPE_DISK &&
2328 			 vtarget->minSyncFactor <= MPT_ULTRA160)
2329 			max_depth = MPT_SCSI_CMD_PER_DEV_HIGH;
2330 		else
2331 			max_depth = MPT_SCSI_CMD_PER_DEV_LOW;
2332 	} else
2333 		 max_depth = ioc->sh->can_queue;
2334 
2335 	if (!sdev->tagged_supported)
2336 		max_depth = 1;
2337 
2338 	if (qdepth > max_depth)
2339 		qdepth = max_depth;
2340 
2341 	return scsi_change_queue_depth(sdev, qdepth);
2342 }
2343 
2344 /*
2345  *	OS entry point to adjust the queue_depths on a per-device basis.
2346  *	Called once per device the bus scan. Use it to force the queue_depth
2347  *	member to 1 if a device does not support Q tags.
2348  *	Return non-zero if fails.
2349  */
2350 int
2351 mptscsih_slave_configure(struct scsi_device *sdev)
2352 {
2353 	struct Scsi_Host	*sh = sdev->host;
2354 	VirtTarget		*vtarget;
2355 	VirtDevice		*vdevice;
2356 	struct scsi_target 	*starget;
2357 	MPT_SCSI_HOST		*hd = shost_priv(sh);
2358 	MPT_ADAPTER		*ioc = hd->ioc;
2359 
2360 	starget = scsi_target(sdev);
2361 	vtarget = starget->hostdata;
2362 	vdevice = sdev->hostdata;
2363 
2364 	dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2365 		"device @ %p, channel=%d, id=%d, lun=%llu\n",
2366 		ioc->name, sdev, sdev->channel, sdev->id, sdev->lun));
2367 	if (ioc->bus_type == SPI)
2368 		dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2369 		    "sdtr %d wdtr %d ppr %d inq length=%d\n",
2370 		    ioc->name, sdev->sdtr, sdev->wdtr,
2371 		    sdev->ppr, sdev->inquiry_len));
2372 
2373 	vdevice->configured_lun = 1;
2374 
2375 	dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2376 		"Queue depth=%d, tflags=%x\n",
2377 		ioc->name, sdev->queue_depth, vtarget->tflags));
2378 
2379 	if (ioc->bus_type == SPI)
2380 		dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2381 		    "negoFlags=%x, maxOffset=%x, SyncFactor=%x\n",
2382 		    ioc->name, vtarget->negoFlags, vtarget->maxOffset,
2383 		    vtarget->minSyncFactor));
2384 
2385 	mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH);
2386 	dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2387 		"tagged %d, simple %d\n",
2388 		ioc->name,sdev->tagged_supported, sdev->simple_tags));
2389 
2390 	blk_queue_dma_alignment (sdev->request_queue, 512 - 1);
2391 
2392 	return 0;
2393 }
2394 
2395 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2396 /*
2397  *  Private routines...
2398  */
2399 
2400 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2401 /* Utility function to copy sense data from the scsi_cmnd buffer
2402  * to the FC and SCSI target structures.
2403  *
2404  */
2405 static void
2406 mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply)
2407 {
2408 	VirtDevice	*vdevice;
2409 	SCSIIORequest_t	*pReq;
2410 	u32		 sense_count = le32_to_cpu(pScsiReply->SenseCount);
2411 	MPT_ADAPTER 	*ioc = hd->ioc;
2412 
2413 	/* Get target structure
2414 	 */
2415 	pReq = (SCSIIORequest_t *) mf;
2416 	vdevice = sc->device->hostdata;
2417 
2418 	if (sense_count) {
2419 		u8 *sense_data;
2420 		int req_index;
2421 
2422 		/* Copy the sense received into the scsi command block. */
2423 		req_index = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
2424 		sense_data = ((u8 *)ioc->sense_buf_pool + (req_index * MPT_SENSE_BUFFER_ALLOC));
2425 		memcpy(sc->sense_buffer, sense_data, MPT_SENSE_BUFFER_ALLOC);
2426 
2427 		/* Log SMART data (asc = 0x5D, non-IM case only) if required.
2428 		 */
2429 		if ((ioc->events) && (ioc->eventTypes & (1 << MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE))) {
2430 			if ((sense_data[12] == 0x5D) && (vdevice->vtarget->raidVolume == 0)) {
2431 				int idx;
2432 
2433 				idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE;
2434 				ioc->events[idx].event = MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE;
2435 				ioc->events[idx].eventContext = ioc->eventContext;
2436 
2437 				ioc->events[idx].data[0] = (pReq->LUN[1] << 24) |
2438 					(MPI_EVENT_SCSI_DEV_STAT_RC_SMART_DATA << 16) |
2439 					(sc->device->channel << 8) | sc->device->id;
2440 
2441 				ioc->events[idx].data[1] = (sense_data[13] << 8) | sense_data[12];
2442 
2443 				ioc->eventContext++;
2444 				if (ioc->pcidev->vendor ==
2445 				    PCI_VENDOR_ID_IBM) {
2446 					mptscsih_issue_sep_command(ioc,
2447 					    vdevice->vtarget, MPI_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT);
2448 					vdevice->vtarget->tflags |=
2449 					    MPT_TARGET_FLAGS_LED_ON;
2450 				}
2451 			}
2452 		}
2453 	} else {
2454 		dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Hmmm... SenseData len=0! (?)\n",
2455 				ioc->name));
2456 	}
2457 }
2458 
2459 /**
2460  * mptscsih_get_scsi_lookup - retrieves scmd entry
2461  * @ioc: Pointer to MPT_ADAPTER structure
2462  * @i: index into the array
2463  *
2464  * Returns the scsi_cmd pointer
2465  */
2466 struct scsi_cmnd *
2467 mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i)
2468 {
2469 	unsigned long	flags;
2470 	struct scsi_cmnd *scmd;
2471 
2472 	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
2473 	scmd = ioc->ScsiLookup[i];
2474 	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2475 
2476 	return scmd;
2477 }
2478 EXPORT_SYMBOL(mptscsih_get_scsi_lookup);
2479 
2480 /**
2481  * mptscsih_getclear_scsi_lookup -  retrieves and clears scmd entry from ScsiLookup[] array list
2482  * @ioc: Pointer to MPT_ADAPTER structure
2483  * @i: index into the array
2484  *
2485  * Returns the scsi_cmd pointer
2486  *
2487  **/
2488 static struct scsi_cmnd *
2489 mptscsih_getclear_scsi_lookup(MPT_ADAPTER *ioc, int i)
2490 {
2491 	unsigned long	flags;
2492 	struct scsi_cmnd *scmd;
2493 
2494 	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
2495 	scmd = ioc->ScsiLookup[i];
2496 	ioc->ScsiLookup[i] = NULL;
2497 	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2498 
2499 	return scmd;
2500 }
2501 
2502 /**
2503  * mptscsih_set_scsi_lookup - write a scmd entry into the ScsiLookup[] array list
2504  *
2505  * @ioc: Pointer to MPT_ADAPTER structure
2506  * @i: index into the array
2507  * @scmd: scsi_cmnd pointer
2508  *
2509  **/
2510 static void
2511 mptscsih_set_scsi_lookup(MPT_ADAPTER *ioc, int i, struct scsi_cmnd *scmd)
2512 {
2513 	unsigned long	flags;
2514 
2515 	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
2516 	ioc->ScsiLookup[i] = scmd;
2517 	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2518 }
2519 
2520 /**
2521  * SCPNT_TO_LOOKUP_IDX - searches for a given scmd in the ScsiLookup[] array list
2522  * @ioc: Pointer to MPT_ADAPTER structure
2523  * @sc: scsi_cmnd pointer
2524  */
2525 static int
2526 SCPNT_TO_LOOKUP_IDX(MPT_ADAPTER *ioc, struct scsi_cmnd *sc)
2527 {
2528 	unsigned long	flags;
2529 	int i, index=-1;
2530 
2531 	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
2532 	for (i = 0; i < ioc->req_depth; i++) {
2533 		if (ioc->ScsiLookup[i] == sc) {
2534 			index = i;
2535 			goto out;
2536 		}
2537 	}
2538 
2539  out:
2540 	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2541 	return index;
2542 }
2543 
2544 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2545 int
2546 mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
2547 {
2548 	MPT_SCSI_HOST	*hd;
2549 
2550 	if (ioc->sh == NULL || shost_priv(ioc->sh) == NULL)
2551 		return 0;
2552 
2553 	hd = shost_priv(ioc->sh);
2554 	switch (reset_phase) {
2555 	case MPT_IOC_SETUP_RESET:
2556 		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2557 		    "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
2558 		break;
2559 	case MPT_IOC_PRE_RESET:
2560 		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2561 		    "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
2562 		mptscsih_flush_running_cmds(hd);
2563 		break;
2564 	case MPT_IOC_POST_RESET:
2565 		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2566 		    "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
2567 		if (ioc->internal_cmds.status & MPT_MGMT_STATUS_PENDING) {
2568 			ioc->internal_cmds.status |=
2569 				MPT_MGMT_STATUS_DID_IOCRESET;
2570 			complete(&ioc->internal_cmds.done);
2571 		}
2572 		break;
2573 	default:
2574 		break;
2575 	}
2576 	return 1;		/* currently means nothing really */
2577 }
2578 
2579 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2580 int
2581 mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
2582 {
2583 	u8 event = le32_to_cpu(pEvReply->Event) & 0xFF;
2584 
2585 	devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2586 		"MPT event (=%02Xh) routed to SCSI host driver!\n",
2587 		ioc->name, event));
2588 
2589 	if ((event == MPI_EVENT_IOC_BUS_RESET ||
2590 	    event == MPI_EVENT_EXT_BUS_RESET) &&
2591 	    (ioc->bus_type == SPI) && (ioc->soft_resets < -1))
2592 			ioc->soft_resets++;
2593 
2594 	return 1;		/* currently means nothing really */
2595 }
2596 
2597 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2598 /*
2599  *  Bus Scan and Domain Validation functionality ...
2600  */
2601 
2602 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2603 /*
2604  *	mptscsih_scandv_complete - Scan and DV callback routine registered
2605  *	to Fustion MPT (base) driver.
2606  *
2607  *	@ioc: Pointer to MPT_ADAPTER structure
2608  *	@mf: Pointer to original MPT request frame
2609  *	@mr: Pointer to MPT reply frame (NULL if TurboReply)
2610  *
2611  *	This routine is called from mpt.c::mpt_interrupt() at the completion
2612  *	of any SCSI IO request.
2613  *	This routine is registered with the Fusion MPT (base) driver at driver
2614  *	load/init time via the mpt_register() API call.
2615  *
2616  *	Returns 1 indicating alloc'd request frame ptr should be freed.
2617  *
2618  *	Remark: Sets a completion code and (possibly) saves sense data
2619  *	in the IOC member localReply structure.
2620  *	Used ONLY for DV and other internal commands.
2621  */
2622 int
2623 mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
2624 				MPT_FRAME_HDR *reply)
2625 {
2626 	SCSIIORequest_t *pReq;
2627 	SCSIIOReply_t	*pReply;
2628 	u8		 cmd;
2629 	u16		 req_idx;
2630 	u8	*sense_data;
2631 	int		 sz;
2632 
2633 	ioc->internal_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
2634 	ioc->internal_cmds.completion_code = MPT_SCANDV_GOOD;
2635 	if (!reply)
2636 		goto out;
2637 
2638 	pReply = (SCSIIOReply_t *) reply;
2639 	pReq = (SCSIIORequest_t *) req;
2640 	ioc->internal_cmds.completion_code =
2641 	    mptscsih_get_completion_code(ioc, req, reply);
2642 	ioc->internal_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
2643 	memcpy(ioc->internal_cmds.reply, reply,
2644 	    min(MPT_DEFAULT_FRAME_SIZE, 4 * reply->u.reply.MsgLength));
2645 	cmd = reply->u.hdr.Function;
2646 	if (((cmd == MPI_FUNCTION_SCSI_IO_REQUEST) ||
2647 	    (cmd == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) &&
2648 	    (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID)) {
2649 		req_idx = le16_to_cpu(req->u.frame.hwhdr.msgctxu.fld.req_idx);
2650 		sense_data = ((u8 *)ioc->sense_buf_pool +
2651 		    (req_idx * MPT_SENSE_BUFFER_ALLOC));
2652 		sz = min_t(int, pReq->SenseBufferLength,
2653 		    MPT_SENSE_BUFFER_ALLOC);
2654 		memcpy(ioc->internal_cmds.sense, sense_data, sz);
2655 	}
2656  out:
2657 	if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_PENDING))
2658 		return 0;
2659 	ioc->internal_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
2660 	complete(&ioc->internal_cmds.done);
2661 	return 1;
2662 }
2663 
2664 
2665 /**
2666  *	mptscsih_get_completion_code - get completion code from MPT request
2667  *	@ioc: Pointer to MPT_ADAPTER structure
2668  *	@req: Pointer to original MPT request frame
2669  *	@reply: Pointer to MPT reply frame (NULL if TurboReply)
2670  *
2671  **/
2672 static int
2673 mptscsih_get_completion_code(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
2674 				MPT_FRAME_HDR *reply)
2675 {
2676 	SCSIIOReply_t	*pReply;
2677 	MpiRaidActionReply_t *pr;
2678 	u8		 scsi_status;
2679 	u16		 status;
2680 	int		 completion_code;
2681 
2682 	pReply = (SCSIIOReply_t *)reply;
2683 	status = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
2684 	scsi_status = pReply->SCSIStatus;
2685 
2686 	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2687 	    "IOCStatus=%04xh, SCSIState=%02xh, SCSIStatus=%02xh,"
2688 	    "IOCLogInfo=%08xh\n", ioc->name, status, pReply->SCSIState,
2689 	    scsi_status, le32_to_cpu(pReply->IOCLogInfo)));
2690 
2691 	switch (status) {
2692 
2693 	case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE:	/* 0x0043 */
2694 		completion_code = MPT_SCANDV_SELECTION_TIMEOUT;
2695 		break;
2696 
2697 	case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR:		/* 0x0046 */
2698 	case MPI_IOCSTATUS_SCSI_TASK_TERMINATED:	/* 0x0048 */
2699 	case MPI_IOCSTATUS_SCSI_IOC_TERMINATED:		/* 0x004B */
2700 	case MPI_IOCSTATUS_SCSI_EXT_TERMINATED:		/* 0x004C */
2701 		completion_code = MPT_SCANDV_DID_RESET;
2702 		break;
2703 
2704 	case MPI_IOCSTATUS_BUSY:
2705 	case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES:
2706 		completion_code = MPT_SCANDV_BUSY;
2707 		break;
2708 
2709 	case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN:		/* 0x0045 */
2710 	case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR:	/* 0x0040 */
2711 	case MPI_IOCSTATUS_SUCCESS:			/* 0x0000 */
2712 		if (pReply->Function == MPI_FUNCTION_CONFIG) {
2713 			completion_code = MPT_SCANDV_GOOD;
2714 		} else if (pReply->Function == MPI_FUNCTION_RAID_ACTION) {
2715 			pr = (MpiRaidActionReply_t *)reply;
2716 			if (le16_to_cpu(pr->ActionStatus) ==
2717 				MPI_RAID_ACTION_ASTATUS_SUCCESS)
2718 				completion_code = MPT_SCANDV_GOOD;
2719 			else
2720 				completion_code = MPT_SCANDV_SOME_ERROR;
2721 		} else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID)
2722 			completion_code = MPT_SCANDV_SENSE;
2723 		else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_FAILED) {
2724 			if (req->u.scsireq.CDB[0] == INQUIRY)
2725 				completion_code = MPT_SCANDV_ISSUE_SENSE;
2726 			else
2727 				completion_code = MPT_SCANDV_DID_RESET;
2728 		} else if (pReply->SCSIState & MPI_SCSI_STATE_NO_SCSI_STATUS)
2729 			completion_code = MPT_SCANDV_DID_RESET;
2730 		else if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
2731 			completion_code = MPT_SCANDV_DID_RESET;
2732 		else if (scsi_status == MPI_SCSI_STATUS_BUSY)
2733 			completion_code = MPT_SCANDV_BUSY;
2734 		else
2735 			completion_code = MPT_SCANDV_GOOD;
2736 		break;
2737 
2738 	case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR:		/* 0x0047 */
2739 		if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
2740 			completion_code = MPT_SCANDV_DID_RESET;
2741 		else
2742 			completion_code = MPT_SCANDV_SOME_ERROR;
2743 		break;
2744 	default:
2745 		completion_code = MPT_SCANDV_SOME_ERROR;
2746 		break;
2747 
2748 	}	/* switch(status) */
2749 
2750 	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2751 	    "  completionCode set to %08xh\n", ioc->name, completion_code));
2752 	return completion_code;
2753 }
2754 
2755 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2756 /**
2757  *	mptscsih_do_cmd - Do internal command.
2758  *	@hd: MPT_SCSI_HOST pointer
2759  *	@io: INTERNAL_CMD pointer.
2760  *
2761  *	Issue the specified internally generated command and do command
2762  *	specific cleanup. For bus scan / DV only.
2763  *	NOTES: If command is Inquiry and status is good,
2764  *	initialize a target structure, save the data
2765  *
2766  *	Remark: Single threaded access only.
2767  *
2768  *	Return:
2769  *		< 0 if an illegal command or no resources
2770  *
2771  *		   0 if good
2772  *
2773  *		 > 0 if command complete but some type of completion error.
2774  */
2775 static int
2776 mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
2777 {
2778 	MPT_FRAME_HDR	*mf;
2779 	SCSIIORequest_t	*pScsiReq;
2780 	int		 my_idx, ii, dir;
2781 	int		 timeout;
2782 	char		 cmdLen;
2783 	char		 CDB[]={0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
2784 	u8		 cmd = io->cmd;
2785 	MPT_ADAPTER *ioc = hd->ioc;
2786 	int		 ret = 0;
2787 	unsigned long	 timeleft;
2788 	unsigned long	 flags;
2789 
2790 	/* don't send internal command during diag reset */
2791 	spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
2792 	if (ioc->ioc_reset_in_progress) {
2793 		spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
2794 		dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2795 			"%s: busy with host reset\n", ioc->name, __func__));
2796 		return MPT_SCANDV_BUSY;
2797 	}
2798 	spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
2799 
2800 	mutex_lock(&ioc->internal_cmds.mutex);
2801 
2802 	/* Set command specific information
2803 	 */
2804 	switch (cmd) {
2805 	case INQUIRY:
2806 		cmdLen = 6;
2807 		dir = MPI_SCSIIO_CONTROL_READ;
2808 		CDB[0] = cmd;
2809 		CDB[4] = io->size;
2810 		timeout = 10;
2811 		break;
2812 
2813 	case TEST_UNIT_READY:
2814 		cmdLen = 6;
2815 		dir = MPI_SCSIIO_CONTROL_READ;
2816 		timeout = 10;
2817 		break;
2818 
2819 	case START_STOP:
2820 		cmdLen = 6;
2821 		dir = MPI_SCSIIO_CONTROL_READ;
2822 		CDB[0] = cmd;
2823 		CDB[4] = 1;	/*Spin up the disk */
2824 		timeout = 15;
2825 		break;
2826 
2827 	case REQUEST_SENSE:
2828 		cmdLen = 6;
2829 		CDB[0] = cmd;
2830 		CDB[4] = io->size;
2831 		dir = MPI_SCSIIO_CONTROL_READ;
2832 		timeout = 10;
2833 		break;
2834 
2835 	case READ_BUFFER:
2836 		cmdLen = 10;
2837 		dir = MPI_SCSIIO_CONTROL_READ;
2838 		CDB[0] = cmd;
2839 		if (io->flags & MPT_ICFLAG_ECHO) {
2840 			CDB[1] = 0x0A;
2841 		} else {
2842 			CDB[1] = 0x02;
2843 		}
2844 
2845 		if (io->flags & MPT_ICFLAG_BUF_CAP) {
2846 			CDB[1] |= 0x01;
2847 		}
2848 		CDB[6] = (io->size >> 16) & 0xFF;
2849 		CDB[7] = (io->size >>  8) & 0xFF;
2850 		CDB[8] = io->size & 0xFF;
2851 		timeout = 10;
2852 		break;
2853 
2854 	case WRITE_BUFFER:
2855 		cmdLen = 10;
2856 		dir = MPI_SCSIIO_CONTROL_WRITE;
2857 		CDB[0] = cmd;
2858 		if (io->flags & MPT_ICFLAG_ECHO) {
2859 			CDB[1] = 0x0A;
2860 		} else {
2861 			CDB[1] = 0x02;
2862 		}
2863 		CDB[6] = (io->size >> 16) & 0xFF;
2864 		CDB[7] = (io->size >>  8) & 0xFF;
2865 		CDB[8] = io->size & 0xFF;
2866 		timeout = 10;
2867 		break;
2868 
2869 	case RESERVE:
2870 		cmdLen = 6;
2871 		dir = MPI_SCSIIO_CONTROL_READ;
2872 		CDB[0] = cmd;
2873 		timeout = 10;
2874 		break;
2875 
2876 	case RELEASE:
2877 		cmdLen = 6;
2878 		dir = MPI_SCSIIO_CONTROL_READ;
2879 		CDB[0] = cmd;
2880 		timeout = 10;
2881 		break;
2882 
2883 	case SYNCHRONIZE_CACHE:
2884 		cmdLen = 10;
2885 		dir = MPI_SCSIIO_CONTROL_READ;
2886 		CDB[0] = cmd;
2887 //		CDB[1] = 0x02;	/* set immediate bit */
2888 		timeout = 10;
2889 		break;
2890 
2891 	default:
2892 		/* Error Case */
2893 		ret = -EFAULT;
2894 		goto out;
2895 	}
2896 
2897 	/* Get and Populate a free Frame
2898 	 * MsgContext set in mpt_get_msg_frame call
2899 	 */
2900 	if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) {
2901 		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: No msg frames!\n",
2902 		    ioc->name, __func__));
2903 		ret = MPT_SCANDV_BUSY;
2904 		goto out;
2905 	}
2906 
2907 	pScsiReq = (SCSIIORequest_t *) mf;
2908 
2909 	/* Get the request index */
2910 	my_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
2911 	ADD_INDEX_LOG(my_idx); /* for debug */
2912 
2913 	if (io->flags & MPT_ICFLAG_PHYS_DISK) {
2914 		pScsiReq->TargetID = io->physDiskNum;
2915 		pScsiReq->Bus = 0;
2916 		pScsiReq->ChainOffset = 0;
2917 		pScsiReq->Function = MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH;
2918 	} else {
2919 		pScsiReq->TargetID = io->id;
2920 		pScsiReq->Bus = io->channel;
2921 		pScsiReq->ChainOffset = 0;
2922 		pScsiReq->Function = MPI_FUNCTION_SCSI_IO_REQUEST;
2923 	}
2924 
2925 	pScsiReq->CDBLength = cmdLen;
2926 	pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE;
2927 
2928 	pScsiReq->Reserved = 0;
2929 
2930 	pScsiReq->MsgFlags = mpt_msg_flags(ioc);
2931 	/* MsgContext set in mpt_get_msg_fram call  */
2932 
2933 	int_to_scsilun(io->lun, (struct scsi_lun *)pScsiReq->LUN);
2934 
2935 	if (io->flags & MPT_ICFLAG_TAGGED_CMD)
2936 		pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_SIMPLEQ);
2937 	else
2938 		pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_UNTAGGED);
2939 
2940 	if (cmd == REQUEST_SENSE) {
2941 		pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_UNTAGGED);
2942 		devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2943 		    "%s: Untagged! 0x%02x\n", ioc->name, __func__, cmd));
2944 	}
2945 
2946 	for (ii = 0; ii < 16; ii++)
2947 		pScsiReq->CDB[ii] = CDB[ii];
2948 
2949 	pScsiReq->DataLength = cpu_to_le32(io->size);
2950 	pScsiReq->SenseBufferLowAddr = cpu_to_le32(ioc->sense_buf_low_dma
2951 					   + (my_idx * MPT_SENSE_BUFFER_ALLOC));
2952 
2953 	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2954 	    "%s: Sending Command 0x%02x for fw_channel=%d fw_id=%d lun=%llu\n",
2955 	    ioc->name, __func__, cmd, io->channel, io->id, io->lun));
2956 
2957 	if (dir == MPI_SCSIIO_CONTROL_READ)
2958 		ioc->add_sge((char *) &pScsiReq->SGL,
2959 		    MPT_SGE_FLAGS_SSIMPLE_READ | io->size, io->data_dma);
2960 	else
2961 		ioc->add_sge((char *) &pScsiReq->SGL,
2962 		    MPT_SGE_FLAGS_SSIMPLE_WRITE | io->size, io->data_dma);
2963 
2964 	INITIALIZE_MGMT_STATUS(ioc->internal_cmds.status)
2965 	mpt_put_msg_frame(ioc->InternalCtx, ioc, mf);
2966 	timeleft = wait_for_completion_timeout(&ioc->internal_cmds.done,
2967 	    timeout*HZ);
2968 	if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
2969 		ret = MPT_SCANDV_DID_RESET;
2970 		dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2971 		    "%s: TIMED OUT for cmd=0x%02x\n", ioc->name, __func__,
2972 		    cmd));
2973 		if (ioc->internal_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) {
2974 			mpt_free_msg_frame(ioc, mf);
2975 			goto out;
2976 		}
2977 		if (!timeleft) {
2978 			printk(MYIOC_s_WARN_FMT
2979 			       "Issuing Reset from %s!! doorbell=0x%08xh"
2980 			       " cmd=0x%02x\n",
2981 			       ioc->name, __func__, mpt_GetIocState(ioc, 0),
2982 			       cmd);
2983 			mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
2984 			mpt_free_msg_frame(ioc, mf);
2985 		}
2986 		goto out;
2987 	}
2988 
2989 	ret = ioc->internal_cmds.completion_code;
2990 	devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: success, rc=0x%02x\n",
2991 			ioc->name, __func__, ret));
2992 
2993  out:
2994 	CLEAR_MGMT_STATUS(ioc->internal_cmds.status)
2995 	mutex_unlock(&ioc->internal_cmds.mutex);
2996 	return ret;
2997 }
2998 
2999 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3000 /**
3001  *	mptscsih_synchronize_cache - Send SYNCHRONIZE_CACHE to all disks.
3002  *	@hd: Pointer to a SCSI HOST structure
3003  *	@vdevice: virtual target device
3004  *
3005  *	Uses the ISR, but with special processing.
3006  *	MUST be single-threaded.
3007  *
3008  */
3009 static void
3010 mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice)
3011 {
3012 	INTERNAL_CMD		 iocmd;
3013 
3014 	/* Ignore hidden raid components, this is handled when the command
3015 	 * is sent to the volume
3016 	 */
3017 	if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT)
3018 		return;
3019 
3020 	if (vdevice->vtarget->type != TYPE_DISK || vdevice->vtarget->deleted ||
3021 	    !vdevice->configured_lun)
3022 		return;
3023 
3024 	/* Following parameters will not change
3025 	 * in this routine.
3026 	 */
3027 	iocmd.cmd = SYNCHRONIZE_CACHE;
3028 	iocmd.flags = 0;
3029 	iocmd.physDiskNum = -1;
3030 	iocmd.data = NULL;
3031 	iocmd.data_dma = -1;
3032 	iocmd.size = 0;
3033 	iocmd.rsvd = iocmd.rsvd2 = 0;
3034 	iocmd.channel = vdevice->vtarget->channel;
3035 	iocmd.id = vdevice->vtarget->id;
3036 	iocmd.lun = vdevice->lun;
3037 
3038 	mptscsih_do_cmd(hd, &iocmd);
3039 }
3040 
3041 static ssize_t
3042 mptscsih_version_fw_show(struct device *dev, struct device_attribute *attr,
3043 			 char *buf)
3044 {
3045 	struct Scsi_Host *host = class_to_shost(dev);
3046 	MPT_SCSI_HOST	*hd = shost_priv(host);
3047 	MPT_ADAPTER *ioc = hd->ioc;
3048 
3049 	return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n",
3050 	    (ioc->facts.FWVersion.Word & 0xFF000000) >> 24,
3051 	    (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16,
3052 	    (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8,
3053 	    ioc->facts.FWVersion.Word & 0x000000FF);
3054 }
3055 static DEVICE_ATTR(version_fw, S_IRUGO, mptscsih_version_fw_show, NULL);
3056 
3057 static ssize_t
3058 mptscsih_version_bios_show(struct device *dev, struct device_attribute *attr,
3059 			   char *buf)
3060 {
3061 	struct Scsi_Host *host = class_to_shost(dev);
3062 	MPT_SCSI_HOST	*hd = shost_priv(host);
3063 	MPT_ADAPTER *ioc = hd->ioc;
3064 
3065 	return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x.%02x\n",
3066 	    (ioc->biosVersion & 0xFF000000) >> 24,
3067 	    (ioc->biosVersion & 0x00FF0000) >> 16,
3068 	    (ioc->biosVersion & 0x0000FF00) >> 8,
3069 	    ioc->biosVersion & 0x000000FF);
3070 }
3071 static DEVICE_ATTR(version_bios, S_IRUGO, mptscsih_version_bios_show, NULL);
3072 
3073 static ssize_t
3074 mptscsih_version_mpi_show(struct device *dev, struct device_attribute *attr,
3075 			  char *buf)
3076 {
3077 	struct Scsi_Host *host = class_to_shost(dev);
3078 	MPT_SCSI_HOST	*hd = shost_priv(host);
3079 	MPT_ADAPTER *ioc = hd->ioc;
3080 
3081 	return snprintf(buf, PAGE_SIZE, "%03x\n", ioc->facts.MsgVersion);
3082 }
3083 static DEVICE_ATTR(version_mpi, S_IRUGO, mptscsih_version_mpi_show, NULL);
3084 
3085 static ssize_t
3086 mptscsih_version_product_show(struct device *dev,
3087 			      struct device_attribute *attr,
3088 char *buf)
3089 {
3090 	struct Scsi_Host *host = class_to_shost(dev);
3091 	MPT_SCSI_HOST	*hd = shost_priv(host);
3092 	MPT_ADAPTER *ioc = hd->ioc;
3093 
3094 	return snprintf(buf, PAGE_SIZE, "%s\n", ioc->prod_name);
3095 }
3096 static DEVICE_ATTR(version_product, S_IRUGO,
3097     mptscsih_version_product_show, NULL);
3098 
3099 static ssize_t
3100 mptscsih_version_nvdata_persistent_show(struct device *dev,
3101 					struct device_attribute *attr,
3102 					char *buf)
3103 {
3104 	struct Scsi_Host *host = class_to_shost(dev);
3105 	MPT_SCSI_HOST	*hd = shost_priv(host);
3106 	MPT_ADAPTER *ioc = hd->ioc;
3107 
3108 	return snprintf(buf, PAGE_SIZE, "%02xh\n",
3109 	    ioc->nvdata_version_persistent);
3110 }
3111 static DEVICE_ATTR(version_nvdata_persistent, S_IRUGO,
3112     mptscsih_version_nvdata_persistent_show, NULL);
3113 
3114 static ssize_t
3115 mptscsih_version_nvdata_default_show(struct device *dev,
3116 				     struct device_attribute *attr, char *buf)
3117 {
3118 	struct Scsi_Host *host = class_to_shost(dev);
3119 	MPT_SCSI_HOST	*hd = shost_priv(host);
3120 	MPT_ADAPTER *ioc = hd->ioc;
3121 
3122 	return snprintf(buf, PAGE_SIZE, "%02xh\n",ioc->nvdata_version_default);
3123 }
3124 static DEVICE_ATTR(version_nvdata_default, S_IRUGO,
3125     mptscsih_version_nvdata_default_show, NULL);
3126 
3127 static ssize_t
3128 mptscsih_board_name_show(struct device *dev, struct device_attribute *attr,
3129 			 char *buf)
3130 {
3131 	struct Scsi_Host *host = class_to_shost(dev);
3132 	MPT_SCSI_HOST	*hd = shost_priv(host);
3133 	MPT_ADAPTER *ioc = hd->ioc;
3134 
3135 	return snprintf(buf, PAGE_SIZE, "%s\n", ioc->board_name);
3136 }
3137 static DEVICE_ATTR(board_name, S_IRUGO, mptscsih_board_name_show, NULL);
3138 
3139 static ssize_t
3140 mptscsih_board_assembly_show(struct device *dev,
3141 			     struct device_attribute *attr, char *buf)
3142 {
3143 	struct Scsi_Host *host = class_to_shost(dev);
3144 	MPT_SCSI_HOST	*hd = shost_priv(host);
3145 	MPT_ADAPTER *ioc = hd->ioc;
3146 
3147 	return snprintf(buf, PAGE_SIZE, "%s\n", ioc->board_assembly);
3148 }
3149 static DEVICE_ATTR(board_assembly, S_IRUGO,
3150     mptscsih_board_assembly_show, NULL);
3151 
3152 static ssize_t
3153 mptscsih_board_tracer_show(struct device *dev, struct device_attribute *attr,
3154 			   char *buf)
3155 {
3156 	struct Scsi_Host *host = class_to_shost(dev);
3157 	MPT_SCSI_HOST	*hd = shost_priv(host);
3158 	MPT_ADAPTER *ioc = hd->ioc;
3159 
3160 	return snprintf(buf, PAGE_SIZE, "%s\n", ioc->board_tracer);
3161 }
3162 static DEVICE_ATTR(board_tracer, S_IRUGO,
3163     mptscsih_board_tracer_show, NULL);
3164 
3165 static ssize_t
3166 mptscsih_io_delay_show(struct device *dev, struct device_attribute *attr,
3167 		       char *buf)
3168 {
3169 	struct Scsi_Host *host = class_to_shost(dev);
3170 	MPT_SCSI_HOST	*hd = shost_priv(host);
3171 	MPT_ADAPTER *ioc = hd->ioc;
3172 
3173 	return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->io_missing_delay);
3174 }
3175 static DEVICE_ATTR(io_delay, S_IRUGO,
3176     mptscsih_io_delay_show, NULL);
3177 
3178 static ssize_t
3179 mptscsih_device_delay_show(struct device *dev, struct device_attribute *attr,
3180 			   char *buf)
3181 {
3182 	struct Scsi_Host *host = class_to_shost(dev);
3183 	MPT_SCSI_HOST	*hd = shost_priv(host);
3184 	MPT_ADAPTER *ioc = hd->ioc;
3185 
3186 	return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->device_missing_delay);
3187 }
3188 static DEVICE_ATTR(device_delay, S_IRUGO,
3189     mptscsih_device_delay_show, NULL);
3190 
3191 static ssize_t
3192 mptscsih_debug_level_show(struct device *dev, struct device_attribute *attr,
3193 			  char *buf)
3194 {
3195 	struct Scsi_Host *host = class_to_shost(dev);
3196 	MPT_SCSI_HOST	*hd = shost_priv(host);
3197 	MPT_ADAPTER *ioc = hd->ioc;
3198 
3199 	return snprintf(buf, PAGE_SIZE, "%08xh\n", ioc->debug_level);
3200 }
3201 static ssize_t
3202 mptscsih_debug_level_store(struct device *dev, struct device_attribute *attr,
3203 			   const char *buf, size_t count)
3204 {
3205 	struct Scsi_Host *host = class_to_shost(dev);
3206 	MPT_SCSI_HOST	*hd = shost_priv(host);
3207 	MPT_ADAPTER *ioc = hd->ioc;
3208 	int val = 0;
3209 
3210 	if (sscanf(buf, "%x", &val) != 1)
3211 		return -EINVAL;
3212 
3213 	ioc->debug_level = val;
3214 	printk(MYIOC_s_INFO_FMT "debug_level=%08xh\n",
3215 				ioc->name, ioc->debug_level);
3216 	return strlen(buf);
3217 }
3218 static DEVICE_ATTR(debug_level, S_IRUGO | S_IWUSR,
3219 	mptscsih_debug_level_show, mptscsih_debug_level_store);
3220 
3221 struct device_attribute *mptscsih_host_attrs[] = {
3222 	&dev_attr_version_fw,
3223 	&dev_attr_version_bios,
3224 	&dev_attr_version_mpi,
3225 	&dev_attr_version_product,
3226 	&dev_attr_version_nvdata_persistent,
3227 	&dev_attr_version_nvdata_default,
3228 	&dev_attr_board_name,
3229 	&dev_attr_board_assembly,
3230 	&dev_attr_board_tracer,
3231 	&dev_attr_io_delay,
3232 	&dev_attr_device_delay,
3233 	&dev_attr_debug_level,
3234 	NULL,
3235 };
3236 
3237 EXPORT_SYMBOL(mptscsih_host_attrs);
3238 
3239 EXPORT_SYMBOL(mptscsih_remove);
3240 EXPORT_SYMBOL(mptscsih_shutdown);
3241 #ifdef CONFIG_PM
3242 EXPORT_SYMBOL(mptscsih_suspend);
3243 EXPORT_SYMBOL(mptscsih_resume);
3244 #endif
3245 EXPORT_SYMBOL(mptscsih_show_info);
3246 EXPORT_SYMBOL(mptscsih_info);
3247 EXPORT_SYMBOL(mptscsih_qcmd);
3248 EXPORT_SYMBOL(mptscsih_slave_destroy);
3249 EXPORT_SYMBOL(mptscsih_slave_configure);
3250 EXPORT_SYMBOL(mptscsih_abort);
3251 EXPORT_SYMBOL(mptscsih_dev_reset);
3252 EXPORT_SYMBOL(mptscsih_bus_reset);
3253 EXPORT_SYMBOL(mptscsih_host_reset);
3254 EXPORT_SYMBOL(mptscsih_bios_param);
3255 EXPORT_SYMBOL(mptscsih_io_done);
3256 EXPORT_SYMBOL(mptscsih_taskmgmt_complete);
3257 EXPORT_SYMBOL(mptscsih_scandv_complete);
3258 EXPORT_SYMBOL(mptscsih_event_process);
3259 EXPORT_SYMBOL(mptscsih_ioc_reset);
3260 EXPORT_SYMBOL(mptscsih_change_queue_depth);
3261 
3262 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3263