1 /* 2 * linux/drivers/message/fusion/mptsas.c 3 * For use with LSI PCI chip/adapter(s) 4 * running LSI Fusion MPT (Message Passing Technology) firmware. 5 * 6 * Copyright (c) 1999-2008 LSI Corporation 7 * (mailto:DL-MPTFusionLinux@lsi.com) 8 */ 9 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 10 /* 11 This program is free software; you can redistribute it and/or modify 12 it under the terms of the GNU General Public License as published by 13 the Free Software Foundation; version 2 of the License. 14 15 This program is distributed in the hope that it will be useful, 16 but WITHOUT ANY WARRANTY; without even the implied warranty of 17 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 GNU General Public License for more details. 19 20 NO WARRANTY 21 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR 22 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT 23 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, 24 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is 25 solely responsible for determining the appropriateness of using and 26 distributing the Program and assumes all risks associated with its 27 exercise of rights under this Agreement, including but not limited to 28 the risks and costs of program errors, damage to or loss of data, 29 programs or equipment, and unavailability or interruption of operations. 30 31 DISCLAIMER OF LIABILITY 32 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY 33 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 34 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND 35 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR 36 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE 37 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED 38 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES 39 40 You should have received a copy of the GNU General Public License 41 along with this program; if not, write to the Free Software 42 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 43 */ 44 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 45 46 #include <linux/module.h> 47 #include <linux/kernel.h> 48 #include <linux/slab.h> 49 #include <linux/init.h> 50 #include <linux/errno.h> 51 #include <linux/jiffies.h> 52 #include <linux/workqueue.h> 53 #include <linux/delay.h> /* for mdelay */ 54 55 #include <scsi/scsi.h> 56 #include <scsi/scsi_cmnd.h> 57 #include <scsi/scsi_device.h> 58 #include <scsi/scsi_host.h> 59 #include <scsi/scsi_transport_sas.h> 60 #include <scsi/scsi_transport.h> 61 #include <scsi/scsi_dbg.h> 62 63 #include "mptbase.h" 64 #include "mptscsih.h" 65 #include "mptsas.h" 66 67 68 #define my_NAME "Fusion MPT SAS Host driver" 69 #define my_VERSION MPT_LINUX_VERSION_COMMON 70 #define MYNAM "mptsas" 71 72 /* 73 * Reserved channel for integrated raid 74 */ 75 #define MPTSAS_RAID_CHANNEL 1 76 77 #define SAS_CONFIG_PAGE_TIMEOUT 30 78 MODULE_AUTHOR(MODULEAUTHOR); 79 MODULE_DESCRIPTION(my_NAME); 80 MODULE_LICENSE("GPL"); 81 MODULE_VERSION(my_VERSION); 82 83 static int mpt_pt_clear; 84 module_param(mpt_pt_clear, int, 0); 85 MODULE_PARM_DESC(mpt_pt_clear, 86 " Clear persistency table: enable=1 " 87 "(default=MPTSCSIH_PT_CLEAR=0)"); 88 89 /* scsi-mid layer global parmeter is max_report_luns, which is 511 */ 90 #define MPTSAS_MAX_LUN (16895) 91 static int max_lun = MPTSAS_MAX_LUN; 92 module_param(max_lun, int, 0); 93 MODULE_PARM_DESC(max_lun, " max lun, default=16895 "); 94 95 static int mpt_loadtime_max_sectors = 8192; 96 module_param(mpt_loadtime_max_sectors, int, 0); 97 MODULE_PARM_DESC(mpt_loadtime_max_sectors, 98 " Maximum sector define for Host Bus Adaptor.Range 64 to 8192 default=8192"); 99 100 static u8 mptsasDoneCtx = MPT_MAX_PROTOCOL_DRIVERS; 101 static u8 mptsasTaskCtx = MPT_MAX_PROTOCOL_DRIVERS; 102 static u8 mptsasInternalCtx = MPT_MAX_PROTOCOL_DRIVERS; /* Used only for internal commands */ 103 static u8 mptsasMgmtCtx = MPT_MAX_PROTOCOL_DRIVERS; 104 static u8 mptsasDeviceResetCtx = MPT_MAX_PROTOCOL_DRIVERS; 105 106 static void mptsas_firmware_event_work(struct work_struct *work); 107 static void mptsas_send_sas_event(struct fw_event_work *fw_event); 108 static void mptsas_send_raid_event(struct fw_event_work *fw_event); 109 static void mptsas_send_ir2_event(struct fw_event_work *fw_event); 110 static void mptsas_parse_device_info(struct sas_identify *identify, 111 struct mptsas_devinfo *device_info); 112 static inline void mptsas_set_rphy(MPT_ADAPTER *ioc, 113 struct mptsas_phyinfo *phy_info, struct sas_rphy *rphy); 114 static struct mptsas_phyinfo *mptsas_find_phyinfo_by_sas_address 115 (MPT_ADAPTER *ioc, u64 sas_address); 116 static int mptsas_sas_device_pg0(MPT_ADAPTER *ioc, 117 struct mptsas_devinfo *device_info, u32 form, u32 form_specific); 118 static int mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc, 119 struct mptsas_enclosure *enclosure, u32 form, u32 form_specific); 120 static int mptsas_add_end_device(MPT_ADAPTER *ioc, 121 struct mptsas_phyinfo *phy_info); 122 static void mptsas_del_end_device(MPT_ADAPTER *ioc, 123 struct mptsas_phyinfo *phy_info); 124 static void mptsas_send_link_status_event(struct fw_event_work *fw_event); 125 static struct mptsas_portinfo *mptsas_find_portinfo_by_sas_address 126 (MPT_ADAPTER *ioc, u64 sas_address); 127 static void mptsas_expander_delete(MPT_ADAPTER *ioc, 128 struct mptsas_portinfo *port_info, u8 force); 129 static void mptsas_send_expander_event(struct fw_event_work *fw_event); 130 static void mptsas_not_responding_devices(MPT_ADAPTER *ioc); 131 static void mptsas_scan_sas_topology(MPT_ADAPTER *ioc); 132 static void mptsas_broadcast_primative_work(struct fw_event_work *fw_event); 133 static void mptsas_handle_queue_full_event(struct fw_event_work *fw_event); 134 static void mptsas_volume_delete(MPT_ADAPTER *ioc, u8 id); 135 void mptsas_schedule_target_reset(void *ioc); 136 137 static void mptsas_print_phy_data(MPT_ADAPTER *ioc, 138 MPI_SAS_IO_UNIT0_PHY_DATA *phy_data) 139 { 140 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT 141 "---- IO UNIT PAGE 0 ------------\n", ioc->name)); 142 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handle=0x%X\n", 143 ioc->name, le16_to_cpu(phy_data->AttachedDeviceHandle))); 144 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Controller Handle=0x%X\n", 145 ioc->name, le16_to_cpu(phy_data->ControllerDevHandle))); 146 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Port=0x%X\n", 147 ioc->name, phy_data->Port)); 148 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Port Flags=0x%X\n", 149 ioc->name, phy_data->PortFlags)); 150 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PHY Flags=0x%X\n", 151 ioc->name, phy_data->PhyFlags)); 152 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Negotiated Link Rate=0x%X\n", 153 ioc->name, phy_data->NegotiatedLinkRate)); 154 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT 155 "Controller PHY Device Info=0x%X\n", ioc->name, 156 le32_to_cpu(phy_data->ControllerPhyDeviceInfo))); 157 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DiscoveryStatus=0x%X\n\n", 158 ioc->name, le32_to_cpu(phy_data->DiscoveryStatus))); 159 } 160 161 static void mptsas_print_phy_pg0(MPT_ADAPTER *ioc, SasPhyPage0_t *pg0) 162 { 163 __le64 sas_address; 164 165 memcpy(&sas_address, &pg0->SASAddress, sizeof(__le64)); 166 167 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT 168 "---- SAS PHY PAGE 0 ------------\n", ioc->name)); 169 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT 170 "Attached Device Handle=0x%X\n", ioc->name, 171 le16_to_cpu(pg0->AttachedDevHandle))); 172 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SAS Address=0x%llX\n", 173 ioc->name, (unsigned long long)le64_to_cpu(sas_address))); 174 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT 175 "Attached PHY Identifier=0x%X\n", ioc->name, 176 pg0->AttachedPhyIdentifier)); 177 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Attached Device Info=0x%X\n", 178 ioc->name, le32_to_cpu(pg0->AttachedDeviceInfo))); 179 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Programmed Link Rate=0x%X\n", 180 ioc->name, pg0->ProgrammedLinkRate)); 181 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Change Count=0x%X\n", 182 ioc->name, pg0->ChangeCount)); 183 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PHY Info=0x%X\n\n", 184 ioc->name, le32_to_cpu(pg0->PhyInfo))); 185 } 186 187 static void mptsas_print_phy_pg1(MPT_ADAPTER *ioc, SasPhyPage1_t *pg1) 188 { 189 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT 190 "---- SAS PHY PAGE 1 ------------\n", ioc->name)); 191 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Invalid Dword Count=0x%x\n", 192 ioc->name, pg1->InvalidDwordCount)); 193 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT 194 "Running Disparity Error Count=0x%x\n", ioc->name, 195 pg1->RunningDisparityErrorCount)); 196 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT 197 "Loss Dword Synch Count=0x%x\n", ioc->name, 198 pg1->LossDwordSynchCount)); 199 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT 200 "PHY Reset Problem Count=0x%x\n\n", ioc->name, 201 pg1->PhyResetProblemCount)); 202 } 203 204 static void mptsas_print_device_pg0(MPT_ADAPTER *ioc, SasDevicePage0_t *pg0) 205 { 206 __le64 sas_address; 207 208 memcpy(&sas_address, &pg0->SASAddress, sizeof(__le64)); 209 210 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT 211 "---- SAS DEVICE PAGE 0 ---------\n", ioc->name)); 212 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handle=0x%X\n", 213 ioc->name, le16_to_cpu(pg0->DevHandle))); 214 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Parent Handle=0x%X\n", 215 ioc->name, le16_to_cpu(pg0->ParentDevHandle))); 216 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Enclosure Handle=0x%X\n", 217 ioc->name, le16_to_cpu(pg0->EnclosureHandle))); 218 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Slot=0x%X\n", 219 ioc->name, le16_to_cpu(pg0->Slot))); 220 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SAS Address=0x%llX\n", 221 ioc->name, (unsigned long long)le64_to_cpu(sas_address))); 222 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Target ID=0x%X\n", 223 ioc->name, pg0->TargetID)); 224 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Bus=0x%X\n", 225 ioc->name, pg0->Bus)); 226 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Parent Phy Num=0x%X\n", 227 ioc->name, pg0->PhyNum)); 228 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Access Status=0x%X\n", 229 ioc->name, le16_to_cpu(pg0->AccessStatus))); 230 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Device Info=0x%X\n", 231 ioc->name, le32_to_cpu(pg0->DeviceInfo))); 232 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Flags=0x%X\n", 233 ioc->name, le16_to_cpu(pg0->Flags))); 234 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Physical Port=0x%X\n\n", 235 ioc->name, pg0->PhysicalPort)); 236 } 237 238 static void mptsas_print_expander_pg1(MPT_ADAPTER *ioc, SasExpanderPage1_t *pg1) 239 { 240 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT 241 "---- SAS EXPANDER PAGE 1 ------------\n", ioc->name)); 242 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Physical Port=0x%X\n", 243 ioc->name, pg1->PhysicalPort)); 244 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PHY Identifier=0x%X\n", 245 ioc->name, pg1->PhyIdentifier)); 246 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Negotiated Link Rate=0x%X\n", 247 ioc->name, pg1->NegotiatedLinkRate)); 248 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Programmed Link Rate=0x%X\n", 249 ioc->name, pg1->ProgrammedLinkRate)); 250 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Hardware Link Rate=0x%X\n", 251 ioc->name, pg1->HwLinkRate)); 252 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Owner Device Handle=0x%X\n", 253 ioc->name, le16_to_cpu(pg1->OwnerDevHandle))); 254 dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT 255 "Attached Device Handle=0x%X\n\n", ioc->name, 256 le16_to_cpu(pg1->AttachedDevHandle))); 257 } 258 259 /* inhibit sas firmware event handling */ 260 static void 261 mptsas_fw_event_off(MPT_ADAPTER *ioc) 262 { 263 unsigned long flags; 264 265 spin_lock_irqsave(&ioc->fw_event_lock, flags); 266 ioc->fw_events_off = 1; 267 ioc->sas_discovery_quiesce_io = 0; 268 spin_unlock_irqrestore(&ioc->fw_event_lock, flags); 269 270 } 271 272 /* enable sas firmware event handling */ 273 static void 274 mptsas_fw_event_on(MPT_ADAPTER *ioc) 275 { 276 unsigned long flags; 277 278 spin_lock_irqsave(&ioc->fw_event_lock, flags); 279 ioc->fw_events_off = 0; 280 spin_unlock_irqrestore(&ioc->fw_event_lock, flags); 281 } 282 283 /* queue a sas firmware event */ 284 static void 285 mptsas_add_fw_event(MPT_ADAPTER *ioc, struct fw_event_work *fw_event, 286 unsigned long delay) 287 { 288 unsigned long flags; 289 290 spin_lock_irqsave(&ioc->fw_event_lock, flags); 291 list_add_tail(&fw_event->list, &ioc->fw_event_list); 292 INIT_DELAYED_WORK(&fw_event->work, mptsas_firmware_event_work); 293 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: add (fw_event=0x%p)" 294 "on cpuid %d\n", ioc->name, __func__, 295 fw_event, smp_processor_id())); 296 queue_delayed_work_on(smp_processor_id(), ioc->fw_event_q, 297 &fw_event->work, delay); 298 spin_unlock_irqrestore(&ioc->fw_event_lock, flags); 299 } 300 301 /* requeue a sas firmware event */ 302 static void 303 mptsas_requeue_fw_event(MPT_ADAPTER *ioc, struct fw_event_work *fw_event, 304 unsigned long delay) 305 { 306 unsigned long flags; 307 spin_lock_irqsave(&ioc->fw_event_lock, flags); 308 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: reschedule task " 309 "(fw_event=0x%p)on cpuid %d\n", ioc->name, __func__, 310 fw_event, smp_processor_id())); 311 fw_event->retries++; 312 queue_delayed_work_on(smp_processor_id(), ioc->fw_event_q, 313 &fw_event->work, msecs_to_jiffies(delay)); 314 spin_unlock_irqrestore(&ioc->fw_event_lock, flags); 315 } 316 317 /* free memory associated to a sas firmware event */ 318 static void 319 mptsas_free_fw_event(MPT_ADAPTER *ioc, struct fw_event_work *fw_event) 320 { 321 unsigned long flags; 322 323 spin_lock_irqsave(&ioc->fw_event_lock, flags); 324 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: kfree (fw_event=0x%p)\n", 325 ioc->name, __func__, fw_event)); 326 list_del(&fw_event->list); 327 kfree(fw_event); 328 spin_unlock_irqrestore(&ioc->fw_event_lock, flags); 329 } 330 331 /* walk the firmware event queue, and either stop or wait for 332 * outstanding events to complete */ 333 static void 334 mptsas_cleanup_fw_event_q(MPT_ADAPTER *ioc) 335 { 336 struct fw_event_work *fw_event, *next; 337 struct mptsas_target_reset_event *target_reset_list, *n; 338 MPT_SCSI_HOST *hd = shost_priv(ioc->sh); 339 340 /* flush the target_reset_list */ 341 if (!list_empty(&hd->target_reset_list)) { 342 list_for_each_entry_safe(target_reset_list, n, 343 &hd->target_reset_list, list) { 344 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 345 "%s: removing target reset for id=%d\n", 346 ioc->name, __func__, 347 target_reset_list->sas_event_data.TargetID)); 348 list_del(&target_reset_list->list); 349 kfree(target_reset_list); 350 } 351 } 352 353 if (list_empty(&ioc->fw_event_list) || 354 !ioc->fw_event_q || in_interrupt()) 355 return; 356 357 list_for_each_entry_safe(fw_event, next, &ioc->fw_event_list, list) { 358 if (cancel_delayed_work(&fw_event->work)) 359 mptsas_free_fw_event(ioc, fw_event); 360 } 361 } 362 363 364 static inline MPT_ADAPTER *phy_to_ioc(struct sas_phy *phy) 365 { 366 struct Scsi_Host *shost = dev_to_shost(phy->dev.parent); 367 return ((MPT_SCSI_HOST *)shost->hostdata)->ioc; 368 } 369 370 static inline MPT_ADAPTER *rphy_to_ioc(struct sas_rphy *rphy) 371 { 372 struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent->parent); 373 return ((MPT_SCSI_HOST *)shost->hostdata)->ioc; 374 } 375 376 /* 377 * mptsas_find_portinfo_by_handle 378 * 379 * This function should be called with the sas_topology_mutex already held 380 */ 381 static struct mptsas_portinfo * 382 mptsas_find_portinfo_by_handle(MPT_ADAPTER *ioc, u16 handle) 383 { 384 struct mptsas_portinfo *port_info, *rc=NULL; 385 int i; 386 387 list_for_each_entry(port_info, &ioc->sas_topology, list) 388 for (i = 0; i < port_info->num_phys; i++) 389 if (port_info->phy_info[i].identify.handle == handle) { 390 rc = port_info; 391 goto out; 392 } 393 out: 394 return rc; 395 } 396 397 /** 398 * mptsas_find_portinfo_by_sas_address - 399 * @ioc: Pointer to MPT_ADAPTER structure 400 * @handle: 401 * 402 * This function should be called with the sas_topology_mutex already held 403 * 404 **/ 405 static struct mptsas_portinfo * 406 mptsas_find_portinfo_by_sas_address(MPT_ADAPTER *ioc, u64 sas_address) 407 { 408 struct mptsas_portinfo *port_info, *rc = NULL; 409 int i; 410 411 if (sas_address >= ioc->hba_port_sas_addr && 412 sas_address < (ioc->hba_port_sas_addr + 413 ioc->hba_port_num_phy)) 414 return ioc->hba_port_info; 415 416 mutex_lock(&ioc->sas_topology_mutex); 417 list_for_each_entry(port_info, &ioc->sas_topology, list) 418 for (i = 0; i < port_info->num_phys; i++) 419 if (port_info->phy_info[i].identify.sas_address == 420 sas_address) { 421 rc = port_info; 422 goto out; 423 } 424 out: 425 mutex_unlock(&ioc->sas_topology_mutex); 426 return rc; 427 } 428 429 /* 430 * Returns true if there is a scsi end device 431 */ 432 static inline int 433 mptsas_is_end_device(struct mptsas_devinfo * attached) 434 { 435 if ((attached->sas_address) && 436 (attached->device_info & 437 MPI_SAS_DEVICE_INFO_END_DEVICE) && 438 ((attached->device_info & 439 MPI_SAS_DEVICE_INFO_SSP_TARGET) | 440 (attached->device_info & 441 MPI_SAS_DEVICE_INFO_STP_TARGET) | 442 (attached->device_info & 443 MPI_SAS_DEVICE_INFO_SATA_DEVICE))) 444 return 1; 445 else 446 return 0; 447 } 448 449 /* no mutex */ 450 static void 451 mptsas_port_delete(MPT_ADAPTER *ioc, struct mptsas_portinfo_details * port_details) 452 { 453 struct mptsas_portinfo *port_info; 454 struct mptsas_phyinfo *phy_info; 455 u8 i; 456 457 if (!port_details) 458 return; 459 460 port_info = port_details->port_info; 461 phy_info = port_info->phy_info; 462 463 dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: [%p]: num_phys=%02d " 464 "bitmask=0x%016llX\n", ioc->name, __func__, port_details, 465 port_details->num_phys, (unsigned long long) 466 port_details->phy_bitmask)); 467 468 for (i = 0; i < port_info->num_phys; i++, phy_info++) { 469 if(phy_info->port_details != port_details) 470 continue; 471 memset(&phy_info->attached, 0, sizeof(struct mptsas_devinfo)); 472 mptsas_set_rphy(ioc, phy_info, NULL); 473 phy_info->port_details = NULL; 474 } 475 kfree(port_details); 476 } 477 478 static inline struct sas_rphy * 479 mptsas_get_rphy(struct mptsas_phyinfo *phy_info) 480 { 481 if (phy_info->port_details) 482 return phy_info->port_details->rphy; 483 else 484 return NULL; 485 } 486 487 static inline void 488 mptsas_set_rphy(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info, struct sas_rphy *rphy) 489 { 490 if (phy_info->port_details) { 491 phy_info->port_details->rphy = rphy; 492 dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "sas_rphy_add: rphy=%p\n", 493 ioc->name, rphy)); 494 } 495 496 if (rphy) { 497 dsaswideprintk(ioc, dev_printk(KERN_DEBUG, 498 &rphy->dev, MYIOC_s_FMT "add:", ioc->name)); 499 dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "rphy=%p release=%p\n", 500 ioc->name, rphy, rphy->dev.release)); 501 } 502 } 503 504 static inline struct sas_port * 505 mptsas_get_port(struct mptsas_phyinfo *phy_info) 506 { 507 if (phy_info->port_details) 508 return phy_info->port_details->port; 509 else 510 return NULL; 511 } 512 513 static inline void 514 mptsas_set_port(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info, struct sas_port *port) 515 { 516 if (phy_info->port_details) 517 phy_info->port_details->port = port; 518 519 if (port) { 520 dsaswideprintk(ioc, dev_printk(KERN_DEBUG, 521 &port->dev, MYIOC_s_FMT "add:", ioc->name)); 522 dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "port=%p release=%p\n", 523 ioc->name, port, port->dev.release)); 524 } 525 } 526 527 static inline struct scsi_target * 528 mptsas_get_starget(struct mptsas_phyinfo *phy_info) 529 { 530 if (phy_info->port_details) 531 return phy_info->port_details->starget; 532 else 533 return NULL; 534 } 535 536 static inline void 537 mptsas_set_starget(struct mptsas_phyinfo *phy_info, struct scsi_target * 538 starget) 539 { 540 if (phy_info->port_details) 541 phy_info->port_details->starget = starget; 542 } 543 544 /** 545 * mptsas_add_device_component - 546 * @ioc: Pointer to MPT_ADAPTER structure 547 * @channel: fw mapped id's 548 * @id: 549 * @sas_address: 550 * @device_info: 551 * 552 **/ 553 static void 554 mptsas_add_device_component(MPT_ADAPTER *ioc, u8 channel, u8 id, 555 u64 sas_address, u32 device_info, u16 slot, u64 enclosure_logical_id) 556 { 557 struct mptsas_device_info *sas_info, *next; 558 struct scsi_device *sdev; 559 struct scsi_target *starget; 560 struct sas_rphy *rphy; 561 562 /* 563 * Delete all matching devices out of the list 564 */ 565 mutex_lock(&ioc->sas_device_info_mutex); 566 list_for_each_entry_safe(sas_info, next, &ioc->sas_device_info_list, 567 list) { 568 if (!sas_info->is_logical_volume && 569 (sas_info->sas_address == sas_address || 570 (sas_info->fw.channel == channel && 571 sas_info->fw.id == id))) { 572 list_del(&sas_info->list); 573 kfree(sas_info); 574 } 575 } 576 577 sas_info = kzalloc(sizeof(struct mptsas_device_info), GFP_KERNEL); 578 if (!sas_info) 579 goto out; 580 581 /* 582 * Set Firmware mapping 583 */ 584 sas_info->fw.id = id; 585 sas_info->fw.channel = channel; 586 587 sas_info->sas_address = sas_address; 588 sas_info->device_info = device_info; 589 sas_info->slot = slot; 590 sas_info->enclosure_logical_id = enclosure_logical_id; 591 INIT_LIST_HEAD(&sas_info->list); 592 list_add_tail(&sas_info->list, &ioc->sas_device_info_list); 593 594 /* 595 * Set OS mapping 596 */ 597 shost_for_each_device(sdev, ioc->sh) { 598 starget = scsi_target(sdev); 599 rphy = dev_to_rphy(starget->dev.parent); 600 if (rphy->identify.sas_address == sas_address) { 601 sas_info->os.id = starget->id; 602 sas_info->os.channel = starget->channel; 603 } 604 } 605 606 out: 607 mutex_unlock(&ioc->sas_device_info_mutex); 608 return; 609 } 610 611 /** 612 * mptsas_add_device_component_by_fw - 613 * @ioc: Pointer to MPT_ADAPTER structure 614 * @channel: fw mapped id's 615 * @id: 616 * 617 **/ 618 static void 619 mptsas_add_device_component_by_fw(MPT_ADAPTER *ioc, u8 channel, u8 id) 620 { 621 struct mptsas_devinfo sas_device; 622 struct mptsas_enclosure enclosure_info; 623 int rc; 624 625 rc = mptsas_sas_device_pg0(ioc, &sas_device, 626 (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID << 627 MPI_SAS_DEVICE_PGAD_FORM_SHIFT), 628 (channel << 8) + id); 629 if (rc) 630 return; 631 632 memset(&enclosure_info, 0, sizeof(struct mptsas_enclosure)); 633 mptsas_sas_enclosure_pg0(ioc, &enclosure_info, 634 (MPI_SAS_ENCLOS_PGAD_FORM_HANDLE << 635 MPI_SAS_ENCLOS_PGAD_FORM_SHIFT), 636 sas_device.handle_enclosure); 637 638 mptsas_add_device_component(ioc, sas_device.channel, 639 sas_device.id, sas_device.sas_address, sas_device.device_info, 640 sas_device.slot, enclosure_info.enclosure_logical_id); 641 } 642 643 /** 644 * mptsas_add_device_component_starget_ir - Handle Integrated RAID, adding each individual device to list 645 * @ioc: Pointer to MPT_ADAPTER structure 646 * @channel: fw mapped id's 647 * @id: 648 * 649 **/ 650 static void 651 mptsas_add_device_component_starget_ir(MPT_ADAPTER *ioc, 652 struct scsi_target *starget) 653 { 654 CONFIGPARMS cfg; 655 ConfigPageHeader_t hdr; 656 dma_addr_t dma_handle; 657 pRaidVolumePage0_t buffer = NULL; 658 int i; 659 RaidPhysDiskPage0_t phys_disk; 660 struct mptsas_device_info *sas_info, *next; 661 662 memset(&cfg, 0 , sizeof(CONFIGPARMS)); 663 memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); 664 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME; 665 /* assumption that all volumes on channel = 0 */ 666 cfg.pageAddr = starget->id; 667 cfg.cfghdr.hdr = &hdr; 668 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 669 cfg.timeout = SAS_CONFIG_PAGE_TIMEOUT; 670 671 if (mpt_config(ioc, &cfg) != 0) 672 goto out; 673 674 if (!hdr.PageLength) 675 goto out; 676 677 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, 678 &dma_handle); 679 680 if (!buffer) 681 goto out; 682 683 cfg.physAddr = dma_handle; 684 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 685 686 if (mpt_config(ioc, &cfg) != 0) 687 goto out; 688 689 if (!buffer->NumPhysDisks) 690 goto out; 691 692 /* 693 * Adding entry for hidden components 694 */ 695 for (i = 0; i < buffer->NumPhysDisks; i++) { 696 697 if (mpt_raid_phys_disk_pg0(ioc, 698 buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0) 699 continue; 700 701 mptsas_add_device_component_by_fw(ioc, phys_disk.PhysDiskBus, 702 phys_disk.PhysDiskID); 703 704 mutex_lock(&ioc->sas_device_info_mutex); 705 list_for_each_entry(sas_info, &ioc->sas_device_info_list, 706 list) { 707 if (!sas_info->is_logical_volume && 708 (sas_info->fw.channel == phys_disk.PhysDiskBus && 709 sas_info->fw.id == phys_disk.PhysDiskID)) { 710 sas_info->is_hidden_raid_component = 1; 711 sas_info->volume_id = starget->id; 712 } 713 } 714 mutex_unlock(&ioc->sas_device_info_mutex); 715 716 } 717 718 /* 719 * Delete all matching devices out of the list 720 */ 721 mutex_lock(&ioc->sas_device_info_mutex); 722 list_for_each_entry_safe(sas_info, next, &ioc->sas_device_info_list, 723 list) { 724 if (sas_info->is_logical_volume && sas_info->fw.id == 725 starget->id) { 726 list_del(&sas_info->list); 727 kfree(sas_info); 728 } 729 } 730 731 sas_info = kzalloc(sizeof(struct mptsas_device_info), GFP_KERNEL); 732 if (sas_info) { 733 sas_info->fw.id = starget->id; 734 sas_info->os.id = starget->id; 735 sas_info->os.channel = starget->channel; 736 sas_info->is_logical_volume = 1; 737 INIT_LIST_HEAD(&sas_info->list); 738 list_add_tail(&sas_info->list, &ioc->sas_device_info_list); 739 } 740 mutex_unlock(&ioc->sas_device_info_mutex); 741 742 out: 743 if (buffer) 744 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer, 745 dma_handle); 746 } 747 748 /** 749 * mptsas_add_device_component_starget - 750 * @ioc: Pointer to MPT_ADAPTER structure 751 * @starget: 752 * 753 **/ 754 static void 755 mptsas_add_device_component_starget(MPT_ADAPTER *ioc, 756 struct scsi_target *starget) 757 { 758 VirtTarget *vtarget; 759 struct sas_rphy *rphy; 760 struct mptsas_phyinfo *phy_info = NULL; 761 struct mptsas_enclosure enclosure_info; 762 763 rphy = dev_to_rphy(starget->dev.parent); 764 vtarget = starget->hostdata; 765 phy_info = mptsas_find_phyinfo_by_sas_address(ioc, 766 rphy->identify.sas_address); 767 if (!phy_info) 768 return; 769 770 memset(&enclosure_info, 0, sizeof(struct mptsas_enclosure)); 771 mptsas_sas_enclosure_pg0(ioc, &enclosure_info, 772 (MPI_SAS_ENCLOS_PGAD_FORM_HANDLE << 773 MPI_SAS_ENCLOS_PGAD_FORM_SHIFT), 774 phy_info->attached.handle_enclosure); 775 776 mptsas_add_device_component(ioc, phy_info->attached.channel, 777 phy_info->attached.id, phy_info->attached.sas_address, 778 phy_info->attached.device_info, 779 phy_info->attached.slot, enclosure_info.enclosure_logical_id); 780 } 781 782 /** 783 * mptsas_del_device_component_by_os - Once a device has been removed, we mark the entry in the list as being cached 784 * @ioc: Pointer to MPT_ADAPTER structure 785 * @channel: os mapped id's 786 * @id: 787 * 788 **/ 789 static void 790 mptsas_del_device_component_by_os(MPT_ADAPTER *ioc, u8 channel, u8 id) 791 { 792 struct mptsas_device_info *sas_info, *next; 793 794 /* 795 * Set is_cached flag 796 */ 797 list_for_each_entry_safe(sas_info, next, &ioc->sas_device_info_list, 798 list) { 799 if (sas_info->os.channel == channel && sas_info->os.id == id) 800 sas_info->is_cached = 1; 801 } 802 } 803 804 /** 805 * mptsas_del_device_components - Cleaning the list 806 * @ioc: Pointer to MPT_ADAPTER structure 807 * 808 **/ 809 static void 810 mptsas_del_device_components(MPT_ADAPTER *ioc) 811 { 812 struct mptsas_device_info *sas_info, *next; 813 814 mutex_lock(&ioc->sas_device_info_mutex); 815 list_for_each_entry_safe(sas_info, next, &ioc->sas_device_info_list, 816 list) { 817 list_del(&sas_info->list); 818 kfree(sas_info); 819 } 820 mutex_unlock(&ioc->sas_device_info_mutex); 821 } 822 823 824 /* 825 * mptsas_setup_wide_ports 826 * 827 * Updates for new and existing narrow/wide port configuration 828 * in the sas_topology 829 */ 830 static void 831 mptsas_setup_wide_ports(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info) 832 { 833 struct mptsas_portinfo_details * port_details; 834 struct mptsas_phyinfo *phy_info, *phy_info_cmp; 835 u64 sas_address; 836 int i, j; 837 838 mutex_lock(&ioc->sas_topology_mutex); 839 840 phy_info = port_info->phy_info; 841 for (i = 0 ; i < port_info->num_phys ; i++, phy_info++) { 842 if (phy_info->attached.handle) 843 continue; 844 port_details = phy_info->port_details; 845 if (!port_details) 846 continue; 847 if (port_details->num_phys < 2) 848 continue; 849 /* 850 * Removing a phy from a port, letting the last 851 * phy be removed by firmware events. 852 */ 853 dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT 854 "%s: [%p]: deleting phy = %d\n", 855 ioc->name, __func__, port_details, i)); 856 port_details->num_phys--; 857 port_details->phy_bitmask &= ~ (1 << phy_info->phy_id); 858 memset(&phy_info->attached, 0, sizeof(struct mptsas_devinfo)); 859 if (phy_info->phy) { 860 devtprintk(ioc, dev_printk(KERN_DEBUG, 861 &phy_info->phy->dev, MYIOC_s_FMT 862 "delete phy %d, phy-obj (0x%p)\n", ioc->name, 863 phy_info->phy_id, phy_info->phy)); 864 sas_port_delete_phy(port_details->port, phy_info->phy); 865 } 866 phy_info->port_details = NULL; 867 } 868 869 /* 870 * Populate and refresh the tree 871 */ 872 phy_info = port_info->phy_info; 873 for (i = 0 ; i < port_info->num_phys ; i++, phy_info++) { 874 sas_address = phy_info->attached.sas_address; 875 dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "phy_id=%d sas_address=0x%018llX\n", 876 ioc->name, i, (unsigned long long)sas_address)); 877 if (!sas_address) 878 continue; 879 port_details = phy_info->port_details; 880 /* 881 * Forming a port 882 */ 883 if (!port_details) { 884 port_details = kzalloc(sizeof(struct 885 mptsas_portinfo_details), GFP_KERNEL); 886 if (!port_details) 887 goto out; 888 port_details->num_phys = 1; 889 port_details->port_info = port_info; 890 if (phy_info->phy_id < 64 ) 891 port_details->phy_bitmask |= 892 (1 << phy_info->phy_id); 893 phy_info->sas_port_add_phy=1; 894 dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "\t\tForming port\n\t\t" 895 "phy_id=%d sas_address=0x%018llX\n", 896 ioc->name, i, (unsigned long long)sas_address)); 897 phy_info->port_details = port_details; 898 } 899 900 if (i == port_info->num_phys - 1) 901 continue; 902 phy_info_cmp = &port_info->phy_info[i + 1]; 903 for (j = i + 1 ; j < port_info->num_phys ; j++, 904 phy_info_cmp++) { 905 if (!phy_info_cmp->attached.sas_address) 906 continue; 907 if (sas_address != phy_info_cmp->attached.sas_address) 908 continue; 909 if (phy_info_cmp->port_details == port_details ) 910 continue; 911 dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT 912 "\t\tphy_id=%d sas_address=0x%018llX\n", 913 ioc->name, j, (unsigned long long) 914 phy_info_cmp->attached.sas_address)); 915 if (phy_info_cmp->port_details) { 916 port_details->rphy = 917 mptsas_get_rphy(phy_info_cmp); 918 port_details->port = 919 mptsas_get_port(phy_info_cmp); 920 port_details->starget = 921 mptsas_get_starget(phy_info_cmp); 922 port_details->num_phys = 923 phy_info_cmp->port_details->num_phys; 924 if (!phy_info_cmp->port_details->num_phys) 925 kfree(phy_info_cmp->port_details); 926 } else 927 phy_info_cmp->sas_port_add_phy=1; 928 /* 929 * Adding a phy to a port 930 */ 931 phy_info_cmp->port_details = port_details; 932 if (phy_info_cmp->phy_id < 64 ) 933 port_details->phy_bitmask |= 934 (1 << phy_info_cmp->phy_id); 935 port_details->num_phys++; 936 } 937 } 938 939 out: 940 941 for (i = 0; i < port_info->num_phys; i++) { 942 port_details = port_info->phy_info[i].port_details; 943 if (!port_details) 944 continue; 945 dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT 946 "%s: [%p]: phy_id=%02d num_phys=%02d " 947 "bitmask=0x%016llX\n", ioc->name, __func__, 948 port_details, i, port_details->num_phys, 949 (unsigned long long)port_details->phy_bitmask)); 950 dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "\t\tport = %p rphy=%p\n", 951 ioc->name, port_details->port, port_details->rphy)); 952 } 953 dsaswideprintk(ioc, printk("\n")); 954 mutex_unlock(&ioc->sas_topology_mutex); 955 } 956 957 /** 958 * csmisas_find_vtarget 959 * 960 * @ioc 961 * @volume_id 962 * @volume_bus 963 * 964 **/ 965 static VirtTarget * 966 mptsas_find_vtarget(MPT_ADAPTER *ioc, u8 channel, u8 id) 967 { 968 struct scsi_device *sdev; 969 VirtDevice *vdevice; 970 VirtTarget *vtarget = NULL; 971 972 shost_for_each_device(sdev, ioc->sh) { 973 vdevice = sdev->hostdata; 974 if ((vdevice == NULL) || 975 (vdevice->vtarget == NULL)) 976 continue; 977 if ((vdevice->vtarget->tflags & 978 MPT_TARGET_FLAGS_RAID_COMPONENT || 979 vdevice->vtarget->raidVolume)) 980 continue; 981 if (vdevice->vtarget->id == id && 982 vdevice->vtarget->channel == channel) 983 vtarget = vdevice->vtarget; 984 } 985 return vtarget; 986 } 987 988 static void 989 mptsas_queue_device_delete(MPT_ADAPTER *ioc, 990 MpiEventDataSasDeviceStatusChange_t *sas_event_data) 991 { 992 struct fw_event_work *fw_event; 993 int sz; 994 995 sz = offsetof(struct fw_event_work, event_data) + 996 sizeof(MpiEventDataSasDeviceStatusChange_t); 997 fw_event = kzalloc(sz, GFP_ATOMIC); 998 if (!fw_event) { 999 printk(MYIOC_s_WARN_FMT "%s: failed at (line=%d)\n", 1000 ioc->name, __func__, __LINE__); 1001 return; 1002 } 1003 memcpy(fw_event->event_data, sas_event_data, 1004 sizeof(MpiEventDataSasDeviceStatusChange_t)); 1005 fw_event->event = MPI_EVENT_SAS_DEVICE_STATUS_CHANGE; 1006 fw_event->ioc = ioc; 1007 mptsas_add_fw_event(ioc, fw_event, msecs_to_jiffies(1)); 1008 } 1009 1010 static void 1011 mptsas_queue_rescan(MPT_ADAPTER *ioc) 1012 { 1013 struct fw_event_work *fw_event; 1014 int sz; 1015 1016 sz = offsetof(struct fw_event_work, event_data); 1017 fw_event = kzalloc(sz, GFP_ATOMIC); 1018 if (!fw_event) { 1019 printk(MYIOC_s_WARN_FMT "%s: failed at (line=%d)\n", 1020 ioc->name, __func__, __LINE__); 1021 return; 1022 } 1023 fw_event->event = -1; 1024 fw_event->ioc = ioc; 1025 mptsas_add_fw_event(ioc, fw_event, msecs_to_jiffies(1)); 1026 } 1027 1028 1029 /** 1030 * mptsas_target_reset 1031 * 1032 * Issues TARGET_RESET to end device using handshaking method 1033 * 1034 * @ioc 1035 * @channel 1036 * @id 1037 * 1038 * Returns (1) success 1039 * (0) failure 1040 * 1041 **/ 1042 static int 1043 mptsas_target_reset(MPT_ADAPTER *ioc, u8 channel, u8 id) 1044 { 1045 MPT_FRAME_HDR *mf; 1046 SCSITaskMgmt_t *pScsiTm; 1047 if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) 1048 return 0; 1049 1050 1051 mf = mpt_get_msg_frame(mptsasDeviceResetCtx, ioc); 1052 if (mf == NULL) { 1053 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT 1054 "%s, no msg frames @%d!!\n", ioc->name, 1055 __func__, __LINE__)); 1056 goto out_fail; 1057 } 1058 1059 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request (mf=%p)\n", 1060 ioc->name, mf)); 1061 1062 /* Format the Request 1063 */ 1064 pScsiTm = (SCSITaskMgmt_t *) mf; 1065 memset (pScsiTm, 0, sizeof(SCSITaskMgmt_t)); 1066 pScsiTm->TargetID = id; 1067 pScsiTm->Bus = channel; 1068 pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT; 1069 pScsiTm->TaskType = MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET; 1070 pScsiTm->MsgFlags = MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION; 1071 1072 DBG_DUMP_TM_REQUEST_FRAME(ioc, (u32 *)mf); 1073 1074 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 1075 "TaskMgmt type=%d (sas device delete) fw_channel = %d fw_id = %d)\n", 1076 ioc->name, MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET, channel, id)); 1077 1078 mpt_put_msg_frame_hi_pri(mptsasDeviceResetCtx, ioc, mf); 1079 1080 return 1; 1081 1082 out_fail: 1083 1084 mpt_clear_taskmgmt_in_progress_flag(ioc); 1085 return 0; 1086 } 1087 1088 static void 1089 mptsas_block_io_sdev(struct scsi_device *sdev, void *data) 1090 { 1091 scsi_device_set_state(sdev, SDEV_BLOCK); 1092 } 1093 1094 static void 1095 mptsas_block_io_starget(struct scsi_target *starget) 1096 { 1097 if (starget) 1098 starget_for_each_device(starget, NULL, mptsas_block_io_sdev); 1099 } 1100 1101 /** 1102 * mptsas_target_reset_queue 1103 * 1104 * Receive request for TARGET_RESET after receiving an firmware 1105 * event NOT_RESPONDING_EVENT, then put command in link list 1106 * and queue if task_queue already in use. 1107 * 1108 * @ioc 1109 * @sas_event_data 1110 * 1111 **/ 1112 static void 1113 mptsas_target_reset_queue(MPT_ADAPTER *ioc, 1114 EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data) 1115 { 1116 MPT_SCSI_HOST *hd = shost_priv(ioc->sh); 1117 VirtTarget *vtarget = NULL; 1118 struct mptsas_target_reset_event *target_reset_list; 1119 u8 id, channel; 1120 1121 id = sas_event_data->TargetID; 1122 channel = sas_event_data->Bus; 1123 1124 vtarget = mptsas_find_vtarget(ioc, channel, id); 1125 if (vtarget) { 1126 mptsas_block_io_starget(vtarget->starget); 1127 vtarget->deleted = 1; /* block IO */ 1128 } 1129 1130 target_reset_list = kzalloc(sizeof(struct mptsas_target_reset_event), 1131 GFP_ATOMIC); 1132 if (!target_reset_list) { 1133 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT 1134 "%s, failed to allocate mem @%d..!!\n", 1135 ioc->name, __func__, __LINE__)); 1136 return; 1137 } 1138 1139 memcpy(&target_reset_list->sas_event_data, sas_event_data, 1140 sizeof(*sas_event_data)); 1141 list_add_tail(&target_reset_list->list, &hd->target_reset_list); 1142 1143 target_reset_list->time_count = jiffies; 1144 1145 if (mptsas_target_reset(ioc, channel, id)) { 1146 target_reset_list->target_reset_issued = 1; 1147 } 1148 } 1149 1150 /** 1151 * mptsas_schedule_target_reset- send pending target reset 1152 * @iocp: per adapter object 1153 * 1154 * This function will delete scheduled target reset from the list and 1155 * try to send next target reset. This will be called from completion 1156 * context of any Task management command. 1157 */ 1158 1159 void 1160 mptsas_schedule_target_reset(void *iocp) 1161 { 1162 MPT_ADAPTER *ioc = (MPT_ADAPTER *)(iocp); 1163 MPT_SCSI_HOST *hd = shost_priv(ioc->sh); 1164 struct list_head *head = &hd->target_reset_list; 1165 struct mptsas_target_reset_event *target_reset_list; 1166 u8 id, channel; 1167 /* 1168 * issue target reset to next device in the queue 1169 */ 1170 1171 head = &hd->target_reset_list; 1172 if (list_empty(head)) 1173 return; 1174 1175 target_reset_list = list_entry(head->next, 1176 struct mptsas_target_reset_event, list); 1177 1178 id = target_reset_list->sas_event_data.TargetID; 1179 channel = target_reset_list->sas_event_data.Bus; 1180 target_reset_list->time_count = jiffies; 1181 1182 if (mptsas_target_reset(ioc, channel, id)) 1183 target_reset_list->target_reset_issued = 1; 1184 return; 1185 } 1186 1187 1188 /** 1189 * mptsas_taskmgmt_complete - complete SAS task management function 1190 * @ioc: Pointer to MPT_ADAPTER structure 1191 * 1192 * Completion for TARGET_RESET after NOT_RESPONDING_EVENT, enable work 1193 * queue to finish off removing device from upper layers. then send next 1194 * TARGET_RESET in the queue. 1195 **/ 1196 static int 1197 mptsas_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) 1198 { 1199 MPT_SCSI_HOST *hd = shost_priv(ioc->sh); 1200 struct list_head *head = &hd->target_reset_list; 1201 u8 id, channel; 1202 struct mptsas_target_reset_event *target_reset_list; 1203 SCSITaskMgmtReply_t *pScsiTmReply; 1204 1205 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt completed: " 1206 "(mf = %p, mr = %p)\n", ioc->name, mf, mr)); 1207 1208 pScsiTmReply = (SCSITaskMgmtReply_t *)mr; 1209 if (pScsiTmReply) { 1210 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 1211 "\tTaskMgmt completed: fw_channel = %d, fw_id = %d,\n" 1212 "\ttask_type = 0x%02X, iocstatus = 0x%04X " 1213 "loginfo = 0x%08X,\n\tresponse_code = 0x%02X, " 1214 "term_cmnds = %d\n", ioc->name, 1215 pScsiTmReply->Bus, pScsiTmReply->TargetID, 1216 pScsiTmReply->TaskType, 1217 le16_to_cpu(pScsiTmReply->IOCStatus), 1218 le32_to_cpu(pScsiTmReply->IOCLogInfo), 1219 pScsiTmReply->ResponseCode, 1220 le32_to_cpu(pScsiTmReply->TerminationCount))); 1221 1222 if (pScsiTmReply->ResponseCode) 1223 mptscsih_taskmgmt_response_code(ioc, 1224 pScsiTmReply->ResponseCode); 1225 } 1226 1227 if (pScsiTmReply && (pScsiTmReply->TaskType == 1228 MPI_SCSITASKMGMT_TASKTYPE_QUERY_TASK || pScsiTmReply->TaskType == 1229 MPI_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET)) { 1230 ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD; 1231 ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_RF_VALID; 1232 memcpy(ioc->taskmgmt_cmds.reply, mr, 1233 min(MPT_DEFAULT_FRAME_SIZE, 4 * mr->u.reply.MsgLength)); 1234 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) { 1235 ioc->taskmgmt_cmds.status &= ~MPT_MGMT_STATUS_PENDING; 1236 complete(&ioc->taskmgmt_cmds.done); 1237 return 1; 1238 } 1239 return 0; 1240 } 1241 1242 mpt_clear_taskmgmt_in_progress_flag(ioc); 1243 1244 if (list_empty(head)) 1245 return 1; 1246 1247 target_reset_list = list_entry(head->next, 1248 struct mptsas_target_reset_event, list); 1249 1250 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 1251 "TaskMgmt: completed (%d seconds)\n", 1252 ioc->name, jiffies_to_msecs(jiffies - 1253 target_reset_list->time_count)/1000)); 1254 1255 id = pScsiTmReply->TargetID; 1256 channel = pScsiTmReply->Bus; 1257 target_reset_list->time_count = jiffies; 1258 1259 /* 1260 * retry target reset 1261 */ 1262 if (!target_reset_list->target_reset_issued) { 1263 if (mptsas_target_reset(ioc, channel, id)) 1264 target_reset_list->target_reset_issued = 1; 1265 return 1; 1266 } 1267 1268 /* 1269 * enable work queue to remove device from upper layers 1270 */ 1271 list_del(&target_reset_list->list); 1272 if (!ioc->fw_events_off) 1273 mptsas_queue_device_delete(ioc, 1274 &target_reset_list->sas_event_data); 1275 1276 1277 ioc->schedule_target_reset(ioc); 1278 1279 return 1; 1280 } 1281 1282 /** 1283 * mptscsih_ioc_reset 1284 * 1285 * @ioc 1286 * @reset_phase 1287 * 1288 **/ 1289 static int 1290 mptsas_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) 1291 { 1292 MPT_SCSI_HOST *hd; 1293 int rc; 1294 1295 rc = mptscsih_ioc_reset(ioc, reset_phase); 1296 if ((ioc->bus_type != SAS) || (!rc)) 1297 return rc; 1298 1299 hd = shost_priv(ioc->sh); 1300 if (!hd->ioc) 1301 goto out; 1302 1303 switch (reset_phase) { 1304 case MPT_IOC_SETUP_RESET: 1305 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 1306 "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__)); 1307 mptsas_fw_event_off(ioc); 1308 break; 1309 case MPT_IOC_PRE_RESET: 1310 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 1311 "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__)); 1312 break; 1313 case MPT_IOC_POST_RESET: 1314 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 1315 "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__)); 1316 if (ioc->sas_mgmt.status & MPT_MGMT_STATUS_PENDING) { 1317 ioc->sas_mgmt.status |= MPT_MGMT_STATUS_DID_IOCRESET; 1318 complete(&ioc->sas_mgmt.done); 1319 } 1320 mptsas_cleanup_fw_event_q(ioc); 1321 mptsas_queue_rescan(ioc); 1322 break; 1323 default: 1324 break; 1325 } 1326 1327 out: 1328 return rc; 1329 } 1330 1331 1332 /** 1333 * enum device_state - 1334 * @DEVICE_RETRY: need to retry the TUR 1335 * @DEVICE_ERROR: TUR return error, don't add device 1336 * @DEVICE_READY: device can be added 1337 * 1338 */ 1339 enum device_state{ 1340 DEVICE_RETRY, 1341 DEVICE_ERROR, 1342 DEVICE_READY, 1343 }; 1344 1345 static int 1346 mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc, struct mptsas_enclosure *enclosure, 1347 u32 form, u32 form_specific) 1348 { 1349 ConfigExtendedPageHeader_t hdr; 1350 CONFIGPARMS cfg; 1351 SasEnclosurePage0_t *buffer; 1352 dma_addr_t dma_handle; 1353 int error; 1354 __le64 le_identifier; 1355 1356 memset(&hdr, 0, sizeof(hdr)); 1357 hdr.PageVersion = MPI_SASENCLOSURE0_PAGEVERSION; 1358 hdr.PageNumber = 0; 1359 hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; 1360 hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_ENCLOSURE; 1361 1362 cfg.cfghdr.ehdr = &hdr; 1363 cfg.physAddr = -1; 1364 cfg.pageAddr = form + form_specific; 1365 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 1366 cfg.dir = 0; /* read */ 1367 cfg.timeout = SAS_CONFIG_PAGE_TIMEOUT; 1368 1369 error = mpt_config(ioc, &cfg); 1370 if (error) 1371 goto out; 1372 if (!hdr.ExtPageLength) { 1373 error = -ENXIO; 1374 goto out; 1375 } 1376 1377 buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4, 1378 &dma_handle); 1379 if (!buffer) { 1380 error = -ENOMEM; 1381 goto out; 1382 } 1383 1384 cfg.physAddr = dma_handle; 1385 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 1386 1387 error = mpt_config(ioc, &cfg); 1388 if (error) 1389 goto out_free_consistent; 1390 1391 /* save config data */ 1392 memcpy(&le_identifier, &buffer->EnclosureLogicalID, sizeof(__le64)); 1393 enclosure->enclosure_logical_id = le64_to_cpu(le_identifier); 1394 enclosure->enclosure_handle = le16_to_cpu(buffer->EnclosureHandle); 1395 enclosure->flags = le16_to_cpu(buffer->Flags); 1396 enclosure->num_slot = le16_to_cpu(buffer->NumSlots); 1397 enclosure->start_slot = le16_to_cpu(buffer->StartSlot); 1398 enclosure->start_id = buffer->StartTargetID; 1399 enclosure->start_channel = buffer->StartBus; 1400 enclosure->sep_id = buffer->SEPTargetID; 1401 enclosure->sep_channel = buffer->SEPBus; 1402 1403 out_free_consistent: 1404 pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4, 1405 buffer, dma_handle); 1406 out: 1407 return error; 1408 } 1409 1410 /** 1411 * mptsas_add_end_device - report a new end device to sas transport layer 1412 * @ioc: Pointer to MPT_ADAPTER structure 1413 * @phy_info: describes attached device 1414 * 1415 * return (0) success (1) failure 1416 * 1417 **/ 1418 static int 1419 mptsas_add_end_device(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info) 1420 { 1421 struct sas_rphy *rphy; 1422 struct sas_port *port; 1423 struct sas_identify identify; 1424 char *ds = NULL; 1425 u8 fw_id; 1426 1427 if (!phy_info) { 1428 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT 1429 "%s: exit at line=%d\n", ioc->name, 1430 __func__, __LINE__)); 1431 return 1; 1432 } 1433 1434 fw_id = phy_info->attached.id; 1435 1436 if (mptsas_get_rphy(phy_info)) { 1437 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT 1438 "%s: fw_id=%d exit at line=%d\n", ioc->name, 1439 __func__, fw_id, __LINE__)); 1440 return 2; 1441 } 1442 1443 port = mptsas_get_port(phy_info); 1444 if (!port) { 1445 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT 1446 "%s: fw_id=%d exit at line=%d\n", ioc->name, 1447 __func__, fw_id, __LINE__)); 1448 return 3; 1449 } 1450 1451 if (phy_info->attached.device_info & 1452 MPI_SAS_DEVICE_INFO_SSP_TARGET) 1453 ds = "ssp"; 1454 if (phy_info->attached.device_info & 1455 MPI_SAS_DEVICE_INFO_STP_TARGET) 1456 ds = "stp"; 1457 if (phy_info->attached.device_info & 1458 MPI_SAS_DEVICE_INFO_SATA_DEVICE) 1459 ds = "sata"; 1460 1461 printk(MYIOC_s_INFO_FMT "attaching %s device: fw_channel %d, fw_id %d," 1462 " phy %d, sas_addr 0x%llx\n", ioc->name, ds, 1463 phy_info->attached.channel, phy_info->attached.id, 1464 phy_info->attached.phy_id, (unsigned long long) 1465 phy_info->attached.sas_address); 1466 1467 mptsas_parse_device_info(&identify, &phy_info->attached); 1468 rphy = sas_end_device_alloc(port); 1469 if (!rphy) { 1470 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT 1471 "%s: fw_id=%d exit at line=%d\n", ioc->name, 1472 __func__, fw_id, __LINE__)); 1473 return 5; /* non-fatal: an rphy can be added later */ 1474 } 1475 1476 rphy->identify = identify; 1477 if (sas_rphy_add(rphy)) { 1478 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT 1479 "%s: fw_id=%d exit at line=%d\n", ioc->name, 1480 __func__, fw_id, __LINE__)); 1481 sas_rphy_free(rphy); 1482 return 6; 1483 } 1484 mptsas_set_rphy(ioc, phy_info, rphy); 1485 return 0; 1486 } 1487 1488 /** 1489 * mptsas_del_end_device - report a deleted end device to sas transport layer 1490 * @ioc: Pointer to MPT_ADAPTER structure 1491 * @phy_info: describes attached device 1492 * 1493 **/ 1494 static void 1495 mptsas_del_end_device(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info) 1496 { 1497 struct sas_rphy *rphy; 1498 struct sas_port *port; 1499 struct mptsas_portinfo *port_info; 1500 struct mptsas_phyinfo *phy_info_parent; 1501 int i; 1502 char *ds = NULL; 1503 u8 fw_id; 1504 u64 sas_address; 1505 1506 if (!phy_info) 1507 return; 1508 1509 fw_id = phy_info->attached.id; 1510 sas_address = phy_info->attached.sas_address; 1511 1512 if (!phy_info->port_details) { 1513 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT 1514 "%s: fw_id=%d exit at line=%d\n", ioc->name, 1515 __func__, fw_id, __LINE__)); 1516 return; 1517 } 1518 rphy = mptsas_get_rphy(phy_info); 1519 if (!rphy) { 1520 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT 1521 "%s: fw_id=%d exit at line=%d\n", ioc->name, 1522 __func__, fw_id, __LINE__)); 1523 return; 1524 } 1525 1526 if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_SSP_INITIATOR 1527 || phy_info->attached.device_info 1528 & MPI_SAS_DEVICE_INFO_SMP_INITIATOR 1529 || phy_info->attached.device_info 1530 & MPI_SAS_DEVICE_INFO_STP_INITIATOR) 1531 ds = "initiator"; 1532 if (phy_info->attached.device_info & 1533 MPI_SAS_DEVICE_INFO_SSP_TARGET) 1534 ds = "ssp"; 1535 if (phy_info->attached.device_info & 1536 MPI_SAS_DEVICE_INFO_STP_TARGET) 1537 ds = "stp"; 1538 if (phy_info->attached.device_info & 1539 MPI_SAS_DEVICE_INFO_SATA_DEVICE) 1540 ds = "sata"; 1541 1542 dev_printk(KERN_DEBUG, &rphy->dev, MYIOC_s_FMT 1543 "removing %s device: fw_channel %d, fw_id %d, phy %d," 1544 "sas_addr 0x%llx\n", ioc->name, ds, phy_info->attached.channel, 1545 phy_info->attached.id, phy_info->attached.phy_id, 1546 (unsigned long long) sas_address); 1547 1548 port = mptsas_get_port(phy_info); 1549 if (!port) { 1550 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT 1551 "%s: fw_id=%d exit at line=%d\n", ioc->name, 1552 __func__, fw_id, __LINE__)); 1553 return; 1554 } 1555 port_info = phy_info->portinfo; 1556 phy_info_parent = port_info->phy_info; 1557 for (i = 0; i < port_info->num_phys; i++, phy_info_parent++) { 1558 if (!phy_info_parent->phy) 1559 continue; 1560 if (phy_info_parent->attached.sas_address != 1561 sas_address) 1562 continue; 1563 dev_printk(KERN_DEBUG, &phy_info_parent->phy->dev, 1564 MYIOC_s_FMT "delete phy %d, phy-obj (0x%p)\n", 1565 ioc->name, phy_info_parent->phy_id, 1566 phy_info_parent->phy); 1567 sas_port_delete_phy(port, phy_info_parent->phy); 1568 } 1569 1570 dev_printk(KERN_DEBUG, &port->dev, MYIOC_s_FMT 1571 "delete port %d, sas_addr (0x%llx)\n", ioc->name, 1572 port->port_identifier, (unsigned long long)sas_address); 1573 sas_port_delete(port); 1574 mptsas_set_port(ioc, phy_info, NULL); 1575 mptsas_port_delete(ioc, phy_info->port_details); 1576 } 1577 1578 struct mptsas_phyinfo * 1579 mptsas_refreshing_device_handles(MPT_ADAPTER *ioc, 1580 struct mptsas_devinfo *sas_device) 1581 { 1582 struct mptsas_phyinfo *phy_info; 1583 struct mptsas_portinfo *port_info; 1584 int i; 1585 1586 phy_info = mptsas_find_phyinfo_by_sas_address(ioc, 1587 sas_device->sas_address); 1588 if (!phy_info) 1589 goto out; 1590 port_info = phy_info->portinfo; 1591 if (!port_info) 1592 goto out; 1593 mutex_lock(&ioc->sas_topology_mutex); 1594 for (i = 0; i < port_info->num_phys; i++) { 1595 if (port_info->phy_info[i].attached.sas_address != 1596 sas_device->sas_address) 1597 continue; 1598 port_info->phy_info[i].attached.channel = sas_device->channel; 1599 port_info->phy_info[i].attached.id = sas_device->id; 1600 port_info->phy_info[i].attached.sas_address = 1601 sas_device->sas_address; 1602 port_info->phy_info[i].attached.handle = sas_device->handle; 1603 port_info->phy_info[i].attached.handle_parent = 1604 sas_device->handle_parent; 1605 port_info->phy_info[i].attached.handle_enclosure = 1606 sas_device->handle_enclosure; 1607 } 1608 mutex_unlock(&ioc->sas_topology_mutex); 1609 out: 1610 return phy_info; 1611 } 1612 1613 /** 1614 * mptsas_firmware_event_work - work thread for processing fw events 1615 * @work: work queue payload containing info describing the event 1616 * Context: user 1617 * 1618 */ 1619 static void 1620 mptsas_firmware_event_work(struct work_struct *work) 1621 { 1622 struct fw_event_work *fw_event = 1623 container_of(work, struct fw_event_work, work.work); 1624 MPT_ADAPTER *ioc = fw_event->ioc; 1625 1626 /* special rescan topology handling */ 1627 if (fw_event->event == -1) { 1628 if (ioc->in_rescan) { 1629 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT 1630 "%s: rescan ignored as it is in progress\n", 1631 ioc->name, __func__)); 1632 return; 1633 } 1634 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: rescan after " 1635 "reset\n", ioc->name, __func__)); 1636 ioc->in_rescan = 1; 1637 mptsas_not_responding_devices(ioc); 1638 mptsas_scan_sas_topology(ioc); 1639 ioc->in_rescan = 0; 1640 mptsas_free_fw_event(ioc, fw_event); 1641 mptsas_fw_event_on(ioc); 1642 return; 1643 } 1644 1645 /* events handling turned off during host reset */ 1646 if (ioc->fw_events_off) { 1647 mptsas_free_fw_event(ioc, fw_event); 1648 return; 1649 } 1650 1651 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: fw_event=(0x%p), " 1652 "event = (0x%02x)\n", ioc->name, __func__, fw_event, 1653 (fw_event->event & 0xFF))); 1654 1655 switch (fw_event->event) { 1656 case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE: 1657 mptsas_send_sas_event(fw_event); 1658 break; 1659 case MPI_EVENT_INTEGRATED_RAID: 1660 mptsas_send_raid_event(fw_event); 1661 break; 1662 case MPI_EVENT_IR2: 1663 mptsas_send_ir2_event(fw_event); 1664 break; 1665 case MPI_EVENT_PERSISTENT_TABLE_FULL: 1666 mptbase_sas_persist_operation(ioc, 1667 MPI_SAS_OP_CLEAR_NOT_PRESENT); 1668 mptsas_free_fw_event(ioc, fw_event); 1669 break; 1670 case MPI_EVENT_SAS_BROADCAST_PRIMITIVE: 1671 mptsas_broadcast_primative_work(fw_event); 1672 break; 1673 case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE: 1674 mptsas_send_expander_event(fw_event); 1675 break; 1676 case MPI_EVENT_SAS_PHY_LINK_STATUS: 1677 mptsas_send_link_status_event(fw_event); 1678 break; 1679 case MPI_EVENT_QUEUE_FULL: 1680 mptsas_handle_queue_full_event(fw_event); 1681 break; 1682 } 1683 } 1684 1685 1686 1687 static int 1688 mptsas_slave_configure(struct scsi_device *sdev) 1689 { 1690 struct Scsi_Host *host = sdev->host; 1691 MPT_SCSI_HOST *hd = shost_priv(host); 1692 MPT_ADAPTER *ioc = hd->ioc; 1693 VirtDevice *vdevice = sdev->hostdata; 1694 1695 if (vdevice->vtarget->deleted) { 1696 sdev_printk(KERN_INFO, sdev, "clearing deleted flag\n"); 1697 vdevice->vtarget->deleted = 0; 1698 } 1699 1700 /* 1701 * RAID volumes placed beyond the last expected port. 1702 * Ignore sending sas mode pages in that case.. 1703 */ 1704 if (sdev->channel == MPTSAS_RAID_CHANNEL) { 1705 mptsas_add_device_component_starget_ir(ioc, scsi_target(sdev)); 1706 goto out; 1707 } 1708 1709 sas_read_port_mode_page(sdev); 1710 1711 mptsas_add_device_component_starget(ioc, scsi_target(sdev)); 1712 1713 out: 1714 return mptscsih_slave_configure(sdev); 1715 } 1716 1717 static int 1718 mptsas_target_alloc(struct scsi_target *starget) 1719 { 1720 struct Scsi_Host *host = dev_to_shost(&starget->dev); 1721 MPT_SCSI_HOST *hd = shost_priv(host); 1722 VirtTarget *vtarget; 1723 u8 id, channel; 1724 struct sas_rphy *rphy; 1725 struct mptsas_portinfo *p; 1726 int i; 1727 MPT_ADAPTER *ioc = hd->ioc; 1728 1729 vtarget = kzalloc(sizeof(VirtTarget), GFP_KERNEL); 1730 if (!vtarget) 1731 return -ENOMEM; 1732 1733 vtarget->starget = starget; 1734 vtarget->ioc_id = ioc->id; 1735 vtarget->tflags = MPT_TARGET_FLAGS_Q_YES; 1736 id = starget->id; 1737 channel = 0; 1738 1739 /* 1740 * RAID volumes placed beyond the last expected port. 1741 */ 1742 if (starget->channel == MPTSAS_RAID_CHANNEL) { 1743 if (!ioc->raid_data.pIocPg2) { 1744 kfree(vtarget); 1745 return -ENXIO; 1746 } 1747 for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) { 1748 if (id == ioc->raid_data.pIocPg2-> 1749 RaidVolume[i].VolumeID) { 1750 channel = ioc->raid_data.pIocPg2-> 1751 RaidVolume[i].VolumeBus; 1752 } 1753 } 1754 vtarget->raidVolume = 1; 1755 goto out; 1756 } 1757 1758 rphy = dev_to_rphy(starget->dev.parent); 1759 mutex_lock(&ioc->sas_topology_mutex); 1760 list_for_each_entry(p, &ioc->sas_topology, list) { 1761 for (i = 0; i < p->num_phys; i++) { 1762 if (p->phy_info[i].attached.sas_address != 1763 rphy->identify.sas_address) 1764 continue; 1765 id = p->phy_info[i].attached.id; 1766 channel = p->phy_info[i].attached.channel; 1767 mptsas_set_starget(&p->phy_info[i], starget); 1768 1769 /* 1770 * Exposing hidden raid components 1771 */ 1772 if (mptscsih_is_phys_disk(ioc, channel, id)) { 1773 id = mptscsih_raid_id_to_num(ioc, 1774 channel, id); 1775 vtarget->tflags |= 1776 MPT_TARGET_FLAGS_RAID_COMPONENT; 1777 p->phy_info[i].attached.phys_disk_num = id; 1778 } 1779 mutex_unlock(&ioc->sas_topology_mutex); 1780 goto out; 1781 } 1782 } 1783 mutex_unlock(&ioc->sas_topology_mutex); 1784 1785 kfree(vtarget); 1786 return -ENXIO; 1787 1788 out: 1789 vtarget->id = id; 1790 vtarget->channel = channel; 1791 starget->hostdata = vtarget; 1792 return 0; 1793 } 1794 1795 static void 1796 mptsas_target_destroy(struct scsi_target *starget) 1797 { 1798 struct Scsi_Host *host = dev_to_shost(&starget->dev); 1799 MPT_SCSI_HOST *hd = shost_priv(host); 1800 struct sas_rphy *rphy; 1801 struct mptsas_portinfo *p; 1802 int i; 1803 MPT_ADAPTER *ioc = hd->ioc; 1804 VirtTarget *vtarget; 1805 1806 if (!starget->hostdata) 1807 return; 1808 1809 vtarget = starget->hostdata; 1810 1811 mptsas_del_device_component_by_os(ioc, starget->channel, 1812 starget->id); 1813 1814 1815 if (starget->channel == MPTSAS_RAID_CHANNEL) 1816 goto out; 1817 1818 rphy = dev_to_rphy(starget->dev.parent); 1819 list_for_each_entry(p, &ioc->sas_topology, list) { 1820 for (i = 0; i < p->num_phys; i++) { 1821 if (p->phy_info[i].attached.sas_address != 1822 rphy->identify.sas_address) 1823 continue; 1824 1825 starget_printk(KERN_INFO, starget, MYIOC_s_FMT 1826 "delete device: fw_channel %d, fw_id %d, phy %d, " 1827 "sas_addr 0x%llx\n", ioc->name, 1828 p->phy_info[i].attached.channel, 1829 p->phy_info[i].attached.id, 1830 p->phy_info[i].attached.phy_id, (unsigned long long) 1831 p->phy_info[i].attached.sas_address); 1832 1833 mptsas_set_starget(&p->phy_info[i], NULL); 1834 } 1835 } 1836 1837 out: 1838 vtarget->starget = NULL; 1839 kfree(starget->hostdata); 1840 starget->hostdata = NULL; 1841 } 1842 1843 1844 static int 1845 mptsas_slave_alloc(struct scsi_device *sdev) 1846 { 1847 struct Scsi_Host *host = sdev->host; 1848 MPT_SCSI_HOST *hd = shost_priv(host); 1849 struct sas_rphy *rphy; 1850 struct mptsas_portinfo *p; 1851 VirtDevice *vdevice; 1852 struct scsi_target *starget; 1853 int i; 1854 MPT_ADAPTER *ioc = hd->ioc; 1855 1856 vdevice = kzalloc(sizeof(VirtDevice), GFP_KERNEL); 1857 if (!vdevice) { 1858 printk(MYIOC_s_ERR_FMT "slave_alloc kzalloc(%zd) FAILED!\n", 1859 ioc->name, sizeof(VirtDevice)); 1860 return -ENOMEM; 1861 } 1862 starget = scsi_target(sdev); 1863 vdevice->vtarget = starget->hostdata; 1864 1865 if (sdev->channel == MPTSAS_RAID_CHANNEL) 1866 goto out; 1867 1868 rphy = dev_to_rphy(sdev->sdev_target->dev.parent); 1869 mutex_lock(&ioc->sas_topology_mutex); 1870 list_for_each_entry(p, &ioc->sas_topology, list) { 1871 for (i = 0; i < p->num_phys; i++) { 1872 if (p->phy_info[i].attached.sas_address != 1873 rphy->identify.sas_address) 1874 continue; 1875 vdevice->lun = sdev->lun; 1876 /* 1877 * Exposing hidden raid components 1878 */ 1879 if (mptscsih_is_phys_disk(ioc, 1880 p->phy_info[i].attached.channel, 1881 p->phy_info[i].attached.id)) 1882 sdev->no_uld_attach = 1; 1883 mutex_unlock(&ioc->sas_topology_mutex); 1884 goto out; 1885 } 1886 } 1887 mutex_unlock(&ioc->sas_topology_mutex); 1888 1889 kfree(vdevice); 1890 return -ENXIO; 1891 1892 out: 1893 vdevice->vtarget->num_luns++; 1894 sdev->hostdata = vdevice; 1895 return 0; 1896 } 1897 1898 static int 1899 mptsas_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *SCpnt) 1900 { 1901 MPT_SCSI_HOST *hd; 1902 MPT_ADAPTER *ioc; 1903 VirtDevice *vdevice = SCpnt->device->hostdata; 1904 1905 if (!vdevice || !vdevice->vtarget || vdevice->vtarget->deleted) { 1906 SCpnt->result = DID_NO_CONNECT << 16; 1907 SCpnt->scsi_done(SCpnt); 1908 return 0; 1909 } 1910 1911 hd = shost_priv(shost); 1912 ioc = hd->ioc; 1913 1914 if (ioc->sas_discovery_quiesce_io) 1915 return SCSI_MLQUEUE_HOST_BUSY; 1916 1917 if (ioc->debug_level & MPT_DEBUG_SCSI) 1918 scsi_print_command(SCpnt); 1919 1920 return mptscsih_qcmd(SCpnt); 1921 } 1922 1923 /** 1924 * mptsas_mptsas_eh_timed_out - resets the scsi_cmnd timeout 1925 * if the device under question is currently in the 1926 * device removal delay. 1927 * @sc: scsi command that the midlayer is about to time out 1928 * 1929 **/ 1930 static enum blk_eh_timer_return mptsas_eh_timed_out(struct scsi_cmnd *sc) 1931 { 1932 MPT_SCSI_HOST *hd; 1933 MPT_ADAPTER *ioc; 1934 VirtDevice *vdevice; 1935 enum blk_eh_timer_return rc = BLK_EH_NOT_HANDLED; 1936 1937 hd = shost_priv(sc->device->host); 1938 if (hd == NULL) { 1939 printk(KERN_ERR MYNAM ": %s: Can't locate host! (sc=%p)\n", 1940 __func__, sc); 1941 goto done; 1942 } 1943 1944 ioc = hd->ioc; 1945 if (ioc->bus_type != SAS) { 1946 printk(KERN_ERR MYNAM ": %s: Wrong bus type (sc=%p)\n", 1947 __func__, sc); 1948 goto done; 1949 } 1950 1951 /* In case if IOC is in reset from internal context. 1952 * Do not execute EEH for the same IOC. SML should to reset timer. 1953 */ 1954 if (ioc->ioc_reset_in_progress) { 1955 dtmprintk(ioc, printk(MYIOC_s_WARN_FMT ": %s: ioc is in reset," 1956 "SML need to reset the timer (sc=%p)\n", 1957 ioc->name, __func__, sc)); 1958 rc = BLK_EH_RESET_TIMER; 1959 } 1960 vdevice = sc->device->hostdata; 1961 if (vdevice && vdevice->vtarget && (vdevice->vtarget->inDMD 1962 || vdevice->vtarget->deleted)) { 1963 dtmprintk(ioc, printk(MYIOC_s_WARN_FMT ": %s: target removed " 1964 "or in device removal delay (sc=%p)\n", 1965 ioc->name, __func__, sc)); 1966 rc = BLK_EH_RESET_TIMER; 1967 goto done; 1968 } 1969 1970 done: 1971 return rc; 1972 } 1973 1974 1975 static struct scsi_host_template mptsas_driver_template = { 1976 .module = THIS_MODULE, 1977 .proc_name = "mptsas", 1978 .show_info = mptscsih_show_info, 1979 .name = "MPT SAS Host", 1980 .info = mptscsih_info, 1981 .queuecommand = mptsas_qcmd, 1982 .target_alloc = mptsas_target_alloc, 1983 .slave_alloc = mptsas_slave_alloc, 1984 .slave_configure = mptsas_slave_configure, 1985 .target_destroy = mptsas_target_destroy, 1986 .slave_destroy = mptscsih_slave_destroy, 1987 .change_queue_depth = mptscsih_change_queue_depth, 1988 .eh_abort_handler = mptscsih_abort, 1989 .eh_device_reset_handler = mptscsih_dev_reset, 1990 .eh_host_reset_handler = mptscsih_host_reset, 1991 .bios_param = mptscsih_bios_param, 1992 .can_queue = MPT_SAS_CAN_QUEUE, 1993 .this_id = -1, 1994 .sg_tablesize = MPT_SCSI_SG_DEPTH, 1995 .max_sectors = 8192, 1996 .cmd_per_lun = 7, 1997 .use_clustering = ENABLE_CLUSTERING, 1998 .shost_attrs = mptscsih_host_attrs, 1999 }; 2000 2001 static int mptsas_get_linkerrors(struct sas_phy *phy) 2002 { 2003 MPT_ADAPTER *ioc = phy_to_ioc(phy); 2004 ConfigExtendedPageHeader_t hdr; 2005 CONFIGPARMS cfg; 2006 SasPhyPage1_t *buffer; 2007 dma_addr_t dma_handle; 2008 int error; 2009 2010 /* FIXME: only have link errors on local phys */ 2011 if (!scsi_is_sas_phy_local(phy)) 2012 return -EINVAL; 2013 2014 hdr.PageVersion = MPI_SASPHY1_PAGEVERSION; 2015 hdr.ExtPageLength = 0; 2016 hdr.PageNumber = 1 /* page number 1*/; 2017 hdr.Reserved1 = 0; 2018 hdr.Reserved2 = 0; 2019 hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; 2020 hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_PHY; 2021 2022 cfg.cfghdr.ehdr = &hdr; 2023 cfg.physAddr = -1; 2024 cfg.pageAddr = phy->identify.phy_identifier; 2025 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 2026 cfg.dir = 0; /* read */ 2027 cfg.timeout = SAS_CONFIG_PAGE_TIMEOUT; 2028 2029 error = mpt_config(ioc, &cfg); 2030 if (error) 2031 return error; 2032 if (!hdr.ExtPageLength) 2033 return -ENXIO; 2034 2035 buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4, 2036 &dma_handle); 2037 if (!buffer) 2038 return -ENOMEM; 2039 2040 cfg.physAddr = dma_handle; 2041 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 2042 2043 error = mpt_config(ioc, &cfg); 2044 if (error) 2045 goto out_free_consistent; 2046 2047 mptsas_print_phy_pg1(ioc, buffer); 2048 2049 phy->invalid_dword_count = le32_to_cpu(buffer->InvalidDwordCount); 2050 phy->running_disparity_error_count = 2051 le32_to_cpu(buffer->RunningDisparityErrorCount); 2052 phy->loss_of_dword_sync_count = 2053 le32_to_cpu(buffer->LossDwordSynchCount); 2054 phy->phy_reset_problem_count = 2055 le32_to_cpu(buffer->PhyResetProblemCount); 2056 2057 out_free_consistent: 2058 pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4, 2059 buffer, dma_handle); 2060 return error; 2061 } 2062 2063 static int mptsas_mgmt_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, 2064 MPT_FRAME_HDR *reply) 2065 { 2066 ioc->sas_mgmt.status |= MPT_MGMT_STATUS_COMMAND_GOOD; 2067 if (reply != NULL) { 2068 ioc->sas_mgmt.status |= MPT_MGMT_STATUS_RF_VALID; 2069 memcpy(ioc->sas_mgmt.reply, reply, 2070 min(ioc->reply_sz, 4 * reply->u.reply.MsgLength)); 2071 } 2072 2073 if (ioc->sas_mgmt.status & MPT_MGMT_STATUS_PENDING) { 2074 ioc->sas_mgmt.status &= ~MPT_MGMT_STATUS_PENDING; 2075 complete(&ioc->sas_mgmt.done); 2076 return 1; 2077 } 2078 return 0; 2079 } 2080 2081 static int mptsas_phy_reset(struct sas_phy *phy, int hard_reset) 2082 { 2083 MPT_ADAPTER *ioc = phy_to_ioc(phy); 2084 SasIoUnitControlRequest_t *req; 2085 SasIoUnitControlReply_t *reply; 2086 MPT_FRAME_HDR *mf; 2087 MPIHeader_t *hdr; 2088 unsigned long timeleft; 2089 int error = -ERESTARTSYS; 2090 2091 /* FIXME: fusion doesn't allow non-local phy reset */ 2092 if (!scsi_is_sas_phy_local(phy)) 2093 return -EINVAL; 2094 2095 /* not implemented for expanders */ 2096 if (phy->identify.target_port_protocols & SAS_PROTOCOL_SMP) 2097 return -ENXIO; 2098 2099 if (mutex_lock_interruptible(&ioc->sas_mgmt.mutex)) 2100 goto out; 2101 2102 mf = mpt_get_msg_frame(mptsasMgmtCtx, ioc); 2103 if (!mf) { 2104 error = -ENOMEM; 2105 goto out_unlock; 2106 } 2107 2108 hdr = (MPIHeader_t *) mf; 2109 req = (SasIoUnitControlRequest_t *)mf; 2110 memset(req, 0, sizeof(SasIoUnitControlRequest_t)); 2111 req->Function = MPI_FUNCTION_SAS_IO_UNIT_CONTROL; 2112 req->MsgContext = hdr->MsgContext; 2113 req->Operation = hard_reset ? 2114 MPI_SAS_OP_PHY_HARD_RESET : MPI_SAS_OP_PHY_LINK_RESET; 2115 req->PhyNum = phy->identify.phy_identifier; 2116 2117 INITIALIZE_MGMT_STATUS(ioc->sas_mgmt.status) 2118 mpt_put_msg_frame(mptsasMgmtCtx, ioc, mf); 2119 2120 timeleft = wait_for_completion_timeout(&ioc->sas_mgmt.done, 2121 10 * HZ); 2122 if (!(ioc->sas_mgmt.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { 2123 error = -ETIME; 2124 mpt_free_msg_frame(ioc, mf); 2125 if (ioc->sas_mgmt.status & MPT_MGMT_STATUS_DID_IOCRESET) 2126 goto out_unlock; 2127 if (!timeleft) 2128 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); 2129 goto out_unlock; 2130 } 2131 2132 /* a reply frame is expected */ 2133 if ((ioc->sas_mgmt.status & 2134 MPT_MGMT_STATUS_RF_VALID) == 0) { 2135 error = -ENXIO; 2136 goto out_unlock; 2137 } 2138 2139 /* process the completed Reply Message Frame */ 2140 reply = (SasIoUnitControlReply_t *)ioc->sas_mgmt.reply; 2141 if (reply->IOCStatus != MPI_IOCSTATUS_SUCCESS) { 2142 printk(MYIOC_s_INFO_FMT "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n", 2143 ioc->name, __func__, reply->IOCStatus, reply->IOCLogInfo); 2144 error = -ENXIO; 2145 goto out_unlock; 2146 } 2147 2148 error = 0; 2149 2150 out_unlock: 2151 CLEAR_MGMT_STATUS(ioc->sas_mgmt.status) 2152 mutex_unlock(&ioc->sas_mgmt.mutex); 2153 out: 2154 return error; 2155 } 2156 2157 static int 2158 mptsas_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier) 2159 { 2160 MPT_ADAPTER *ioc = rphy_to_ioc(rphy); 2161 int i, error; 2162 struct mptsas_portinfo *p; 2163 struct mptsas_enclosure enclosure_info; 2164 u64 enclosure_handle; 2165 2166 mutex_lock(&ioc->sas_topology_mutex); 2167 list_for_each_entry(p, &ioc->sas_topology, list) { 2168 for (i = 0; i < p->num_phys; i++) { 2169 if (p->phy_info[i].attached.sas_address == 2170 rphy->identify.sas_address) { 2171 enclosure_handle = p->phy_info[i]. 2172 attached.handle_enclosure; 2173 goto found_info; 2174 } 2175 } 2176 } 2177 mutex_unlock(&ioc->sas_topology_mutex); 2178 return -ENXIO; 2179 2180 found_info: 2181 mutex_unlock(&ioc->sas_topology_mutex); 2182 memset(&enclosure_info, 0, sizeof(struct mptsas_enclosure)); 2183 error = mptsas_sas_enclosure_pg0(ioc, &enclosure_info, 2184 (MPI_SAS_ENCLOS_PGAD_FORM_HANDLE << 2185 MPI_SAS_ENCLOS_PGAD_FORM_SHIFT), enclosure_handle); 2186 if (!error) 2187 *identifier = enclosure_info.enclosure_logical_id; 2188 return error; 2189 } 2190 2191 static int 2192 mptsas_get_bay_identifier(struct sas_rphy *rphy) 2193 { 2194 MPT_ADAPTER *ioc = rphy_to_ioc(rphy); 2195 struct mptsas_portinfo *p; 2196 int i, rc; 2197 2198 mutex_lock(&ioc->sas_topology_mutex); 2199 list_for_each_entry(p, &ioc->sas_topology, list) { 2200 for (i = 0; i < p->num_phys; i++) { 2201 if (p->phy_info[i].attached.sas_address == 2202 rphy->identify.sas_address) { 2203 rc = p->phy_info[i].attached.slot; 2204 goto out; 2205 } 2206 } 2207 } 2208 rc = -ENXIO; 2209 out: 2210 mutex_unlock(&ioc->sas_topology_mutex); 2211 return rc; 2212 } 2213 2214 static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, 2215 struct request *req) 2216 { 2217 MPT_ADAPTER *ioc = ((MPT_SCSI_HOST *) shost->hostdata)->ioc; 2218 MPT_FRAME_HDR *mf; 2219 SmpPassthroughRequest_t *smpreq; 2220 struct request *rsp = req->next_rq; 2221 int ret; 2222 int flagsLength; 2223 unsigned long timeleft; 2224 char *psge; 2225 dma_addr_t dma_addr_in = 0; 2226 dma_addr_t dma_addr_out = 0; 2227 u64 sas_address = 0; 2228 2229 if (!rsp) { 2230 printk(MYIOC_s_ERR_FMT "%s: the smp response space is missing\n", 2231 ioc->name, __func__); 2232 return -EINVAL; 2233 } 2234 2235 /* do we need to support multiple segments? */ 2236 if (bio_multiple_segments(req->bio) || 2237 bio_multiple_segments(rsp->bio)) { 2238 printk(MYIOC_s_ERR_FMT "%s: multiple segments req %u, rsp %u\n", 2239 ioc->name, __func__, blk_rq_bytes(req), blk_rq_bytes(rsp)); 2240 return -EINVAL; 2241 } 2242 2243 ret = mutex_lock_interruptible(&ioc->sas_mgmt.mutex); 2244 if (ret) 2245 goto out; 2246 2247 mf = mpt_get_msg_frame(mptsasMgmtCtx, ioc); 2248 if (!mf) { 2249 ret = -ENOMEM; 2250 goto out_unlock; 2251 } 2252 2253 smpreq = (SmpPassthroughRequest_t *)mf; 2254 memset(smpreq, 0, sizeof(*smpreq)); 2255 2256 smpreq->RequestDataLength = cpu_to_le16(blk_rq_bytes(req) - 4); 2257 smpreq->Function = MPI_FUNCTION_SMP_PASSTHROUGH; 2258 2259 if (rphy) 2260 sas_address = rphy->identify.sas_address; 2261 else { 2262 struct mptsas_portinfo *port_info; 2263 2264 mutex_lock(&ioc->sas_topology_mutex); 2265 port_info = ioc->hba_port_info; 2266 if (port_info && port_info->phy_info) 2267 sas_address = 2268 port_info->phy_info[0].phy->identify.sas_address; 2269 mutex_unlock(&ioc->sas_topology_mutex); 2270 } 2271 2272 *((u64 *)&smpreq->SASAddress) = cpu_to_le64(sas_address); 2273 2274 psge = (char *) 2275 (((int *) mf) + (offsetof(SmpPassthroughRequest_t, SGL) / 4)); 2276 2277 /* request */ 2278 flagsLength = (MPI_SGE_FLAGS_SIMPLE_ELEMENT | 2279 MPI_SGE_FLAGS_END_OF_BUFFER | 2280 MPI_SGE_FLAGS_DIRECTION) 2281 << MPI_SGE_FLAGS_SHIFT; 2282 flagsLength |= (blk_rq_bytes(req) - 4); 2283 2284 dma_addr_out = pci_map_single(ioc->pcidev, bio_data(req->bio), 2285 blk_rq_bytes(req), PCI_DMA_BIDIRECTIONAL); 2286 if (!dma_addr_out) 2287 goto put_mf; 2288 ioc->add_sge(psge, flagsLength, dma_addr_out); 2289 psge += ioc->SGE_size; 2290 2291 /* response */ 2292 flagsLength = MPI_SGE_FLAGS_SIMPLE_ELEMENT | 2293 MPI_SGE_FLAGS_SYSTEM_ADDRESS | 2294 MPI_SGE_FLAGS_IOC_TO_HOST | 2295 MPI_SGE_FLAGS_END_OF_BUFFER; 2296 2297 flagsLength = flagsLength << MPI_SGE_FLAGS_SHIFT; 2298 flagsLength |= blk_rq_bytes(rsp) + 4; 2299 dma_addr_in = pci_map_single(ioc->pcidev, bio_data(rsp->bio), 2300 blk_rq_bytes(rsp), PCI_DMA_BIDIRECTIONAL); 2301 if (!dma_addr_in) 2302 goto unmap; 2303 ioc->add_sge(psge, flagsLength, dma_addr_in); 2304 2305 INITIALIZE_MGMT_STATUS(ioc->sas_mgmt.status) 2306 mpt_put_msg_frame(mptsasMgmtCtx, ioc, mf); 2307 2308 timeleft = wait_for_completion_timeout(&ioc->sas_mgmt.done, 10 * HZ); 2309 if (!(ioc->sas_mgmt.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { 2310 ret = -ETIME; 2311 mpt_free_msg_frame(ioc, mf); 2312 mf = NULL; 2313 if (ioc->sas_mgmt.status & MPT_MGMT_STATUS_DID_IOCRESET) 2314 goto unmap; 2315 if (!timeleft) 2316 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); 2317 goto unmap; 2318 } 2319 mf = NULL; 2320 2321 if (ioc->sas_mgmt.status & MPT_MGMT_STATUS_RF_VALID) { 2322 SmpPassthroughReply_t *smprep; 2323 2324 smprep = (SmpPassthroughReply_t *)ioc->sas_mgmt.reply; 2325 memcpy(req->sense, smprep, sizeof(*smprep)); 2326 req->sense_len = sizeof(*smprep); 2327 req->resid_len = 0; 2328 rsp->resid_len -= smprep->ResponseDataLength; 2329 } else { 2330 printk(MYIOC_s_ERR_FMT 2331 "%s: smp passthru reply failed to be returned\n", 2332 ioc->name, __func__); 2333 ret = -ENXIO; 2334 } 2335 unmap: 2336 if (dma_addr_out) 2337 pci_unmap_single(ioc->pcidev, dma_addr_out, blk_rq_bytes(req), 2338 PCI_DMA_BIDIRECTIONAL); 2339 if (dma_addr_in) 2340 pci_unmap_single(ioc->pcidev, dma_addr_in, blk_rq_bytes(rsp), 2341 PCI_DMA_BIDIRECTIONAL); 2342 put_mf: 2343 if (mf) 2344 mpt_free_msg_frame(ioc, mf); 2345 out_unlock: 2346 CLEAR_MGMT_STATUS(ioc->sas_mgmt.status) 2347 mutex_unlock(&ioc->sas_mgmt.mutex); 2348 out: 2349 return ret; 2350 } 2351 2352 static struct sas_function_template mptsas_transport_functions = { 2353 .get_linkerrors = mptsas_get_linkerrors, 2354 .get_enclosure_identifier = mptsas_get_enclosure_identifier, 2355 .get_bay_identifier = mptsas_get_bay_identifier, 2356 .phy_reset = mptsas_phy_reset, 2357 .smp_handler = mptsas_smp_handler, 2358 }; 2359 2360 static struct scsi_transport_template *mptsas_transport_template; 2361 2362 static int 2363 mptsas_sas_io_unit_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info) 2364 { 2365 ConfigExtendedPageHeader_t hdr; 2366 CONFIGPARMS cfg; 2367 SasIOUnitPage0_t *buffer; 2368 dma_addr_t dma_handle; 2369 int error, i; 2370 2371 hdr.PageVersion = MPI_SASIOUNITPAGE0_PAGEVERSION; 2372 hdr.ExtPageLength = 0; 2373 hdr.PageNumber = 0; 2374 hdr.Reserved1 = 0; 2375 hdr.Reserved2 = 0; 2376 hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; 2377 hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT; 2378 2379 cfg.cfghdr.ehdr = &hdr; 2380 cfg.physAddr = -1; 2381 cfg.pageAddr = 0; 2382 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 2383 cfg.dir = 0; /* read */ 2384 cfg.timeout = SAS_CONFIG_PAGE_TIMEOUT; 2385 2386 error = mpt_config(ioc, &cfg); 2387 if (error) 2388 goto out; 2389 if (!hdr.ExtPageLength) { 2390 error = -ENXIO; 2391 goto out; 2392 } 2393 2394 buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4, 2395 &dma_handle); 2396 if (!buffer) { 2397 error = -ENOMEM; 2398 goto out; 2399 } 2400 2401 cfg.physAddr = dma_handle; 2402 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 2403 2404 error = mpt_config(ioc, &cfg); 2405 if (error) 2406 goto out_free_consistent; 2407 2408 port_info->num_phys = buffer->NumPhys; 2409 port_info->phy_info = kcalloc(port_info->num_phys, 2410 sizeof(struct mptsas_phyinfo), GFP_KERNEL); 2411 if (!port_info->phy_info) { 2412 error = -ENOMEM; 2413 goto out_free_consistent; 2414 } 2415 2416 ioc->nvdata_version_persistent = 2417 le16_to_cpu(buffer->NvdataVersionPersistent); 2418 ioc->nvdata_version_default = 2419 le16_to_cpu(buffer->NvdataVersionDefault); 2420 2421 for (i = 0; i < port_info->num_phys; i++) { 2422 mptsas_print_phy_data(ioc, &buffer->PhyData[i]); 2423 port_info->phy_info[i].phy_id = i; 2424 port_info->phy_info[i].port_id = 2425 buffer->PhyData[i].Port; 2426 port_info->phy_info[i].negotiated_link_rate = 2427 buffer->PhyData[i].NegotiatedLinkRate; 2428 port_info->phy_info[i].portinfo = port_info; 2429 port_info->phy_info[i].handle = 2430 le16_to_cpu(buffer->PhyData[i].ControllerDevHandle); 2431 } 2432 2433 out_free_consistent: 2434 pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4, 2435 buffer, dma_handle); 2436 out: 2437 return error; 2438 } 2439 2440 static int 2441 mptsas_sas_io_unit_pg1(MPT_ADAPTER *ioc) 2442 { 2443 ConfigExtendedPageHeader_t hdr; 2444 CONFIGPARMS cfg; 2445 SasIOUnitPage1_t *buffer; 2446 dma_addr_t dma_handle; 2447 int error; 2448 u8 device_missing_delay; 2449 2450 memset(&hdr, 0, sizeof(ConfigExtendedPageHeader_t)); 2451 memset(&cfg, 0, sizeof(CONFIGPARMS)); 2452 2453 cfg.cfghdr.ehdr = &hdr; 2454 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 2455 cfg.timeout = SAS_CONFIG_PAGE_TIMEOUT; 2456 cfg.cfghdr.ehdr->PageType = MPI_CONFIG_PAGETYPE_EXTENDED; 2457 cfg.cfghdr.ehdr->ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT; 2458 cfg.cfghdr.ehdr->PageVersion = MPI_SASIOUNITPAGE1_PAGEVERSION; 2459 cfg.cfghdr.ehdr->PageNumber = 1; 2460 2461 error = mpt_config(ioc, &cfg); 2462 if (error) 2463 goto out; 2464 if (!hdr.ExtPageLength) { 2465 error = -ENXIO; 2466 goto out; 2467 } 2468 2469 buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4, 2470 &dma_handle); 2471 if (!buffer) { 2472 error = -ENOMEM; 2473 goto out; 2474 } 2475 2476 cfg.physAddr = dma_handle; 2477 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 2478 2479 error = mpt_config(ioc, &cfg); 2480 if (error) 2481 goto out_free_consistent; 2482 2483 ioc->io_missing_delay = 2484 le16_to_cpu(buffer->IODeviceMissingDelay); 2485 device_missing_delay = buffer->ReportDeviceMissingDelay; 2486 ioc->device_missing_delay = (device_missing_delay & MPI_SAS_IOUNIT1_REPORT_MISSING_UNIT_16) ? 2487 (device_missing_delay & MPI_SAS_IOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16 : 2488 device_missing_delay & MPI_SAS_IOUNIT1_REPORT_MISSING_TIMEOUT_MASK; 2489 2490 out_free_consistent: 2491 pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4, 2492 buffer, dma_handle); 2493 out: 2494 return error; 2495 } 2496 2497 static int 2498 mptsas_sas_phy_pg0(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info, 2499 u32 form, u32 form_specific) 2500 { 2501 ConfigExtendedPageHeader_t hdr; 2502 CONFIGPARMS cfg; 2503 SasPhyPage0_t *buffer; 2504 dma_addr_t dma_handle; 2505 int error; 2506 2507 hdr.PageVersion = MPI_SASPHY0_PAGEVERSION; 2508 hdr.ExtPageLength = 0; 2509 hdr.PageNumber = 0; 2510 hdr.Reserved1 = 0; 2511 hdr.Reserved2 = 0; 2512 hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; 2513 hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_PHY; 2514 2515 cfg.cfghdr.ehdr = &hdr; 2516 cfg.dir = 0; /* read */ 2517 cfg.timeout = SAS_CONFIG_PAGE_TIMEOUT; 2518 2519 /* Get Phy Pg 0 for each Phy. */ 2520 cfg.physAddr = -1; 2521 cfg.pageAddr = form + form_specific; 2522 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 2523 2524 error = mpt_config(ioc, &cfg); 2525 if (error) 2526 goto out; 2527 2528 if (!hdr.ExtPageLength) { 2529 error = -ENXIO; 2530 goto out; 2531 } 2532 2533 buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4, 2534 &dma_handle); 2535 if (!buffer) { 2536 error = -ENOMEM; 2537 goto out; 2538 } 2539 2540 cfg.physAddr = dma_handle; 2541 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 2542 2543 error = mpt_config(ioc, &cfg); 2544 if (error) 2545 goto out_free_consistent; 2546 2547 mptsas_print_phy_pg0(ioc, buffer); 2548 2549 phy_info->hw_link_rate = buffer->HwLinkRate; 2550 phy_info->programmed_link_rate = buffer->ProgrammedLinkRate; 2551 phy_info->identify.handle = le16_to_cpu(buffer->OwnerDevHandle); 2552 phy_info->attached.handle = le16_to_cpu(buffer->AttachedDevHandle); 2553 2554 out_free_consistent: 2555 pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4, 2556 buffer, dma_handle); 2557 out: 2558 return error; 2559 } 2560 2561 static int 2562 mptsas_sas_device_pg0(MPT_ADAPTER *ioc, struct mptsas_devinfo *device_info, 2563 u32 form, u32 form_specific) 2564 { 2565 ConfigExtendedPageHeader_t hdr; 2566 CONFIGPARMS cfg; 2567 SasDevicePage0_t *buffer; 2568 dma_addr_t dma_handle; 2569 __le64 sas_address; 2570 int error=0; 2571 2572 hdr.PageVersion = MPI_SASDEVICE0_PAGEVERSION; 2573 hdr.ExtPageLength = 0; 2574 hdr.PageNumber = 0; 2575 hdr.Reserved1 = 0; 2576 hdr.Reserved2 = 0; 2577 hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; 2578 hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE; 2579 2580 cfg.cfghdr.ehdr = &hdr; 2581 cfg.pageAddr = form + form_specific; 2582 cfg.physAddr = -1; 2583 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 2584 cfg.dir = 0; /* read */ 2585 cfg.timeout = SAS_CONFIG_PAGE_TIMEOUT; 2586 2587 memset(device_info, 0, sizeof(struct mptsas_devinfo)); 2588 error = mpt_config(ioc, &cfg); 2589 if (error) 2590 goto out; 2591 if (!hdr.ExtPageLength) { 2592 error = -ENXIO; 2593 goto out; 2594 } 2595 2596 buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4, 2597 &dma_handle); 2598 if (!buffer) { 2599 error = -ENOMEM; 2600 goto out; 2601 } 2602 2603 cfg.physAddr = dma_handle; 2604 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 2605 2606 error = mpt_config(ioc, &cfg); 2607 2608 if (error == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) { 2609 error = -ENODEV; 2610 goto out_free_consistent; 2611 } 2612 2613 if (error) 2614 goto out_free_consistent; 2615 2616 mptsas_print_device_pg0(ioc, buffer); 2617 2618 memset(device_info, 0, sizeof(struct mptsas_devinfo)); 2619 device_info->handle = le16_to_cpu(buffer->DevHandle); 2620 device_info->handle_parent = le16_to_cpu(buffer->ParentDevHandle); 2621 device_info->handle_enclosure = 2622 le16_to_cpu(buffer->EnclosureHandle); 2623 device_info->slot = le16_to_cpu(buffer->Slot); 2624 device_info->phy_id = buffer->PhyNum; 2625 device_info->port_id = buffer->PhysicalPort; 2626 device_info->id = buffer->TargetID; 2627 device_info->phys_disk_num = ~0; 2628 device_info->channel = buffer->Bus; 2629 memcpy(&sas_address, &buffer->SASAddress, sizeof(__le64)); 2630 device_info->sas_address = le64_to_cpu(sas_address); 2631 device_info->device_info = 2632 le32_to_cpu(buffer->DeviceInfo); 2633 device_info->flags = le16_to_cpu(buffer->Flags); 2634 2635 out_free_consistent: 2636 pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4, 2637 buffer, dma_handle); 2638 out: 2639 return error; 2640 } 2641 2642 static int 2643 mptsas_sas_expander_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info, 2644 u32 form, u32 form_specific) 2645 { 2646 ConfigExtendedPageHeader_t hdr; 2647 CONFIGPARMS cfg; 2648 SasExpanderPage0_t *buffer; 2649 dma_addr_t dma_handle; 2650 int i, error; 2651 __le64 sas_address; 2652 2653 memset(port_info, 0, sizeof(struct mptsas_portinfo)); 2654 hdr.PageVersion = MPI_SASEXPANDER0_PAGEVERSION; 2655 hdr.ExtPageLength = 0; 2656 hdr.PageNumber = 0; 2657 hdr.Reserved1 = 0; 2658 hdr.Reserved2 = 0; 2659 hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; 2660 hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER; 2661 2662 cfg.cfghdr.ehdr = &hdr; 2663 cfg.physAddr = -1; 2664 cfg.pageAddr = form + form_specific; 2665 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 2666 cfg.dir = 0; /* read */ 2667 cfg.timeout = SAS_CONFIG_PAGE_TIMEOUT; 2668 2669 memset(port_info, 0, sizeof(struct mptsas_portinfo)); 2670 error = mpt_config(ioc, &cfg); 2671 if (error) 2672 goto out; 2673 2674 if (!hdr.ExtPageLength) { 2675 error = -ENXIO; 2676 goto out; 2677 } 2678 2679 buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4, 2680 &dma_handle); 2681 if (!buffer) { 2682 error = -ENOMEM; 2683 goto out; 2684 } 2685 2686 cfg.physAddr = dma_handle; 2687 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 2688 2689 error = mpt_config(ioc, &cfg); 2690 if (error == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) { 2691 error = -ENODEV; 2692 goto out_free_consistent; 2693 } 2694 2695 if (error) 2696 goto out_free_consistent; 2697 2698 /* save config data */ 2699 port_info->num_phys = (buffer->NumPhys) ? buffer->NumPhys : 1; 2700 port_info->phy_info = kcalloc(port_info->num_phys, 2701 sizeof(struct mptsas_phyinfo), GFP_KERNEL); 2702 if (!port_info->phy_info) { 2703 error = -ENOMEM; 2704 goto out_free_consistent; 2705 } 2706 2707 memcpy(&sas_address, &buffer->SASAddress, sizeof(__le64)); 2708 for (i = 0; i < port_info->num_phys; i++) { 2709 port_info->phy_info[i].portinfo = port_info; 2710 port_info->phy_info[i].handle = 2711 le16_to_cpu(buffer->DevHandle); 2712 port_info->phy_info[i].identify.sas_address = 2713 le64_to_cpu(sas_address); 2714 port_info->phy_info[i].identify.handle_parent = 2715 le16_to_cpu(buffer->ParentDevHandle); 2716 } 2717 2718 out_free_consistent: 2719 pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4, 2720 buffer, dma_handle); 2721 out: 2722 return error; 2723 } 2724 2725 static int 2726 mptsas_sas_expander_pg1(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info, 2727 u32 form, u32 form_specific) 2728 { 2729 ConfigExtendedPageHeader_t hdr; 2730 CONFIGPARMS cfg; 2731 SasExpanderPage1_t *buffer; 2732 dma_addr_t dma_handle; 2733 int error=0; 2734 2735 hdr.PageVersion = MPI_SASEXPANDER1_PAGEVERSION; 2736 hdr.ExtPageLength = 0; 2737 hdr.PageNumber = 1; 2738 hdr.Reserved1 = 0; 2739 hdr.Reserved2 = 0; 2740 hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; 2741 hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER; 2742 2743 cfg.cfghdr.ehdr = &hdr; 2744 cfg.physAddr = -1; 2745 cfg.pageAddr = form + form_specific; 2746 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 2747 cfg.dir = 0; /* read */ 2748 cfg.timeout = SAS_CONFIG_PAGE_TIMEOUT; 2749 2750 error = mpt_config(ioc, &cfg); 2751 if (error) 2752 goto out; 2753 2754 if (!hdr.ExtPageLength) { 2755 error = -ENXIO; 2756 goto out; 2757 } 2758 2759 buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4, 2760 &dma_handle); 2761 if (!buffer) { 2762 error = -ENOMEM; 2763 goto out; 2764 } 2765 2766 cfg.physAddr = dma_handle; 2767 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 2768 2769 error = mpt_config(ioc, &cfg); 2770 2771 if (error == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) { 2772 error = -ENODEV; 2773 goto out_free_consistent; 2774 } 2775 2776 if (error) 2777 goto out_free_consistent; 2778 2779 2780 mptsas_print_expander_pg1(ioc, buffer); 2781 2782 /* save config data */ 2783 phy_info->phy_id = buffer->PhyIdentifier; 2784 phy_info->port_id = buffer->PhysicalPort; 2785 phy_info->negotiated_link_rate = buffer->NegotiatedLinkRate; 2786 phy_info->programmed_link_rate = buffer->ProgrammedLinkRate; 2787 phy_info->hw_link_rate = buffer->HwLinkRate; 2788 phy_info->identify.handle = le16_to_cpu(buffer->OwnerDevHandle); 2789 phy_info->attached.handle = le16_to_cpu(buffer->AttachedDevHandle); 2790 2791 out_free_consistent: 2792 pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4, 2793 buffer, dma_handle); 2794 out: 2795 return error; 2796 } 2797 2798 struct rep_manu_request{ 2799 u8 smp_frame_type; 2800 u8 function; 2801 u8 reserved; 2802 u8 request_length; 2803 }; 2804 2805 struct rep_manu_reply{ 2806 u8 smp_frame_type; /* 0x41 */ 2807 u8 function; /* 0x01 */ 2808 u8 function_result; 2809 u8 response_length; 2810 u16 expander_change_count; 2811 u8 reserved0[2]; 2812 u8 sas_format:1; 2813 u8 reserved1:7; 2814 u8 reserved2[3]; 2815 u8 vendor_id[SAS_EXPANDER_VENDOR_ID_LEN]; 2816 u8 product_id[SAS_EXPANDER_PRODUCT_ID_LEN]; 2817 u8 product_rev[SAS_EXPANDER_PRODUCT_REV_LEN]; 2818 u8 component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN]; 2819 u16 component_id; 2820 u8 component_revision_id; 2821 u8 reserved3; 2822 u8 vendor_specific[8]; 2823 }; 2824 2825 /** 2826 * mptsas_exp_repmanufacture_info - 2827 * @ioc: per adapter object 2828 * @sas_address: expander sas address 2829 * @edev: the sas_expander_device object 2830 * 2831 * Fills in the sas_expander_device object when SMP port is created. 2832 * 2833 * Returns 0 for success, non-zero for failure. 2834 */ 2835 static int 2836 mptsas_exp_repmanufacture_info(MPT_ADAPTER *ioc, 2837 u64 sas_address, struct sas_expander_device *edev) 2838 { 2839 MPT_FRAME_HDR *mf; 2840 SmpPassthroughRequest_t *smpreq; 2841 SmpPassthroughReply_t *smprep; 2842 struct rep_manu_reply *manufacture_reply; 2843 struct rep_manu_request *manufacture_request; 2844 int ret; 2845 int flagsLength; 2846 unsigned long timeleft; 2847 char *psge; 2848 unsigned long flags; 2849 void *data_out = NULL; 2850 dma_addr_t data_out_dma = 0; 2851 u32 sz; 2852 2853 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 2854 if (ioc->ioc_reset_in_progress) { 2855 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 2856 printk(MYIOC_s_INFO_FMT "%s: host reset in progress!\n", 2857 __func__, ioc->name); 2858 return -EFAULT; 2859 } 2860 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 2861 2862 ret = mutex_lock_interruptible(&ioc->sas_mgmt.mutex); 2863 if (ret) 2864 goto out; 2865 2866 mf = mpt_get_msg_frame(mptsasMgmtCtx, ioc); 2867 if (!mf) { 2868 ret = -ENOMEM; 2869 goto out_unlock; 2870 } 2871 2872 smpreq = (SmpPassthroughRequest_t *)mf; 2873 memset(smpreq, 0, sizeof(*smpreq)); 2874 2875 sz = sizeof(struct rep_manu_request) + sizeof(struct rep_manu_reply); 2876 2877 data_out = pci_alloc_consistent(ioc->pcidev, sz, &data_out_dma); 2878 if (!data_out) { 2879 printk(KERN_ERR "Memory allocation failure at %s:%d/%s()!\n", 2880 __FILE__, __LINE__, __func__); 2881 ret = -ENOMEM; 2882 goto put_mf; 2883 } 2884 2885 manufacture_request = data_out; 2886 manufacture_request->smp_frame_type = 0x40; 2887 manufacture_request->function = 1; 2888 manufacture_request->reserved = 0; 2889 manufacture_request->request_length = 0; 2890 2891 smpreq->Function = MPI_FUNCTION_SMP_PASSTHROUGH; 2892 smpreq->PhysicalPort = 0xFF; 2893 *((u64 *)&smpreq->SASAddress) = cpu_to_le64(sas_address); 2894 smpreq->RequestDataLength = sizeof(struct rep_manu_request); 2895 2896 psge = (char *) 2897 (((int *) mf) + (offsetof(SmpPassthroughRequest_t, SGL) / 4)); 2898 2899 flagsLength = MPI_SGE_FLAGS_SIMPLE_ELEMENT | 2900 MPI_SGE_FLAGS_SYSTEM_ADDRESS | 2901 MPI_SGE_FLAGS_HOST_TO_IOC | 2902 MPI_SGE_FLAGS_END_OF_BUFFER; 2903 flagsLength = flagsLength << MPI_SGE_FLAGS_SHIFT; 2904 flagsLength |= sizeof(struct rep_manu_request); 2905 2906 ioc->add_sge(psge, flagsLength, data_out_dma); 2907 psge += ioc->SGE_size; 2908 2909 flagsLength = MPI_SGE_FLAGS_SIMPLE_ELEMENT | 2910 MPI_SGE_FLAGS_SYSTEM_ADDRESS | 2911 MPI_SGE_FLAGS_IOC_TO_HOST | 2912 MPI_SGE_FLAGS_END_OF_BUFFER; 2913 flagsLength = flagsLength << MPI_SGE_FLAGS_SHIFT; 2914 flagsLength |= sizeof(struct rep_manu_reply); 2915 ioc->add_sge(psge, flagsLength, data_out_dma + 2916 sizeof(struct rep_manu_request)); 2917 2918 INITIALIZE_MGMT_STATUS(ioc->sas_mgmt.status) 2919 mpt_put_msg_frame(mptsasMgmtCtx, ioc, mf); 2920 2921 timeleft = wait_for_completion_timeout(&ioc->sas_mgmt.done, 10 * HZ); 2922 if (!(ioc->sas_mgmt.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { 2923 ret = -ETIME; 2924 mpt_free_msg_frame(ioc, mf); 2925 mf = NULL; 2926 if (ioc->sas_mgmt.status & MPT_MGMT_STATUS_DID_IOCRESET) 2927 goto out_free; 2928 if (!timeleft) 2929 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); 2930 goto out_free; 2931 } 2932 2933 mf = NULL; 2934 2935 if (ioc->sas_mgmt.status & MPT_MGMT_STATUS_RF_VALID) { 2936 u8 *tmp; 2937 2938 smprep = (SmpPassthroughReply_t *)ioc->sas_mgmt.reply; 2939 if (le16_to_cpu(smprep->ResponseDataLength) != 2940 sizeof(struct rep_manu_reply)) 2941 goto out_free; 2942 2943 manufacture_reply = data_out + sizeof(struct rep_manu_request); 2944 strncpy(edev->vendor_id, manufacture_reply->vendor_id, 2945 SAS_EXPANDER_VENDOR_ID_LEN); 2946 strncpy(edev->product_id, manufacture_reply->product_id, 2947 SAS_EXPANDER_PRODUCT_ID_LEN); 2948 strncpy(edev->product_rev, manufacture_reply->product_rev, 2949 SAS_EXPANDER_PRODUCT_REV_LEN); 2950 edev->level = manufacture_reply->sas_format; 2951 if (manufacture_reply->sas_format) { 2952 strncpy(edev->component_vendor_id, 2953 manufacture_reply->component_vendor_id, 2954 SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN); 2955 tmp = (u8 *)&manufacture_reply->component_id; 2956 edev->component_id = tmp[0] << 8 | tmp[1]; 2957 edev->component_revision_id = 2958 manufacture_reply->component_revision_id; 2959 } 2960 } else { 2961 printk(MYIOC_s_ERR_FMT 2962 "%s: smp passthru reply failed to be returned\n", 2963 ioc->name, __func__); 2964 ret = -ENXIO; 2965 } 2966 out_free: 2967 if (data_out_dma) 2968 pci_free_consistent(ioc->pcidev, sz, data_out, data_out_dma); 2969 put_mf: 2970 if (mf) 2971 mpt_free_msg_frame(ioc, mf); 2972 out_unlock: 2973 CLEAR_MGMT_STATUS(ioc->sas_mgmt.status) 2974 mutex_unlock(&ioc->sas_mgmt.mutex); 2975 out: 2976 return ret; 2977 } 2978 2979 static void 2980 mptsas_parse_device_info(struct sas_identify *identify, 2981 struct mptsas_devinfo *device_info) 2982 { 2983 u16 protocols; 2984 2985 identify->sas_address = device_info->sas_address; 2986 identify->phy_identifier = device_info->phy_id; 2987 2988 /* 2989 * Fill in Phy Initiator Port Protocol. 2990 * Bits 6:3, more than one bit can be set, fall through cases. 2991 */ 2992 protocols = device_info->device_info & 0x78; 2993 identify->initiator_port_protocols = 0; 2994 if (protocols & MPI_SAS_DEVICE_INFO_SSP_INITIATOR) 2995 identify->initiator_port_protocols |= SAS_PROTOCOL_SSP; 2996 if (protocols & MPI_SAS_DEVICE_INFO_STP_INITIATOR) 2997 identify->initiator_port_protocols |= SAS_PROTOCOL_STP; 2998 if (protocols & MPI_SAS_DEVICE_INFO_SMP_INITIATOR) 2999 identify->initiator_port_protocols |= SAS_PROTOCOL_SMP; 3000 if (protocols & MPI_SAS_DEVICE_INFO_SATA_HOST) 3001 identify->initiator_port_protocols |= SAS_PROTOCOL_SATA; 3002 3003 /* 3004 * Fill in Phy Target Port Protocol. 3005 * Bits 10:7, more than one bit can be set, fall through cases. 3006 */ 3007 protocols = device_info->device_info & 0x780; 3008 identify->target_port_protocols = 0; 3009 if (protocols & MPI_SAS_DEVICE_INFO_SSP_TARGET) 3010 identify->target_port_protocols |= SAS_PROTOCOL_SSP; 3011 if (protocols & MPI_SAS_DEVICE_INFO_STP_TARGET) 3012 identify->target_port_protocols |= SAS_PROTOCOL_STP; 3013 if (protocols & MPI_SAS_DEVICE_INFO_SMP_TARGET) 3014 identify->target_port_protocols |= SAS_PROTOCOL_SMP; 3015 if (protocols & MPI_SAS_DEVICE_INFO_SATA_DEVICE) 3016 identify->target_port_protocols |= SAS_PROTOCOL_SATA; 3017 3018 /* 3019 * Fill in Attached device type. 3020 */ 3021 switch (device_info->device_info & 3022 MPI_SAS_DEVICE_INFO_MASK_DEVICE_TYPE) { 3023 case MPI_SAS_DEVICE_INFO_NO_DEVICE: 3024 identify->device_type = SAS_PHY_UNUSED; 3025 break; 3026 case MPI_SAS_DEVICE_INFO_END_DEVICE: 3027 identify->device_type = SAS_END_DEVICE; 3028 break; 3029 case MPI_SAS_DEVICE_INFO_EDGE_EXPANDER: 3030 identify->device_type = SAS_EDGE_EXPANDER_DEVICE; 3031 break; 3032 case MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER: 3033 identify->device_type = SAS_FANOUT_EXPANDER_DEVICE; 3034 break; 3035 } 3036 } 3037 3038 static int mptsas_probe_one_phy(struct device *dev, 3039 struct mptsas_phyinfo *phy_info, int index, int local) 3040 { 3041 MPT_ADAPTER *ioc; 3042 struct sas_phy *phy; 3043 struct sas_port *port; 3044 int error = 0; 3045 VirtTarget *vtarget; 3046 3047 if (!dev) { 3048 error = -ENODEV; 3049 goto out; 3050 } 3051 3052 if (!phy_info->phy) { 3053 phy = sas_phy_alloc(dev, index); 3054 if (!phy) { 3055 error = -ENOMEM; 3056 goto out; 3057 } 3058 } else 3059 phy = phy_info->phy; 3060 3061 mptsas_parse_device_info(&phy->identify, &phy_info->identify); 3062 3063 /* 3064 * Set Negotiated link rate. 3065 */ 3066 switch (phy_info->negotiated_link_rate) { 3067 case MPI_SAS_IOUNIT0_RATE_PHY_DISABLED: 3068 phy->negotiated_linkrate = SAS_PHY_DISABLED; 3069 break; 3070 case MPI_SAS_IOUNIT0_RATE_FAILED_SPEED_NEGOTIATION: 3071 phy->negotiated_linkrate = SAS_LINK_RATE_FAILED; 3072 break; 3073 case MPI_SAS_IOUNIT0_RATE_1_5: 3074 phy->negotiated_linkrate = SAS_LINK_RATE_1_5_GBPS; 3075 break; 3076 case MPI_SAS_IOUNIT0_RATE_3_0: 3077 phy->negotiated_linkrate = SAS_LINK_RATE_3_0_GBPS; 3078 break; 3079 case MPI_SAS_IOUNIT0_RATE_6_0: 3080 phy->negotiated_linkrate = SAS_LINK_RATE_6_0_GBPS; 3081 break; 3082 case MPI_SAS_IOUNIT0_RATE_SATA_OOB_COMPLETE: 3083 case MPI_SAS_IOUNIT0_RATE_UNKNOWN: 3084 default: 3085 phy->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN; 3086 break; 3087 } 3088 3089 /* 3090 * Set Max hardware link rate. 3091 */ 3092 switch (phy_info->hw_link_rate & MPI_SAS_PHY0_PRATE_MAX_RATE_MASK) { 3093 case MPI_SAS_PHY0_HWRATE_MAX_RATE_1_5: 3094 phy->maximum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS; 3095 break; 3096 case MPI_SAS_PHY0_PRATE_MAX_RATE_3_0: 3097 phy->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS; 3098 break; 3099 default: 3100 break; 3101 } 3102 3103 /* 3104 * Set Max programmed link rate. 3105 */ 3106 switch (phy_info->programmed_link_rate & 3107 MPI_SAS_PHY0_PRATE_MAX_RATE_MASK) { 3108 case MPI_SAS_PHY0_PRATE_MAX_RATE_1_5: 3109 phy->maximum_linkrate = SAS_LINK_RATE_1_5_GBPS; 3110 break; 3111 case MPI_SAS_PHY0_PRATE_MAX_RATE_3_0: 3112 phy->maximum_linkrate = SAS_LINK_RATE_3_0_GBPS; 3113 break; 3114 default: 3115 break; 3116 } 3117 3118 /* 3119 * Set Min hardware link rate. 3120 */ 3121 switch (phy_info->hw_link_rate & MPI_SAS_PHY0_HWRATE_MIN_RATE_MASK) { 3122 case MPI_SAS_PHY0_HWRATE_MIN_RATE_1_5: 3123 phy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS; 3124 break; 3125 case MPI_SAS_PHY0_PRATE_MIN_RATE_3_0: 3126 phy->minimum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS; 3127 break; 3128 default: 3129 break; 3130 } 3131 3132 /* 3133 * Set Min programmed link rate. 3134 */ 3135 switch (phy_info->programmed_link_rate & 3136 MPI_SAS_PHY0_PRATE_MIN_RATE_MASK) { 3137 case MPI_SAS_PHY0_PRATE_MIN_RATE_1_5: 3138 phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS; 3139 break; 3140 case MPI_SAS_PHY0_PRATE_MIN_RATE_3_0: 3141 phy->minimum_linkrate = SAS_LINK_RATE_3_0_GBPS; 3142 break; 3143 default: 3144 break; 3145 } 3146 3147 if (!phy_info->phy) { 3148 3149 error = sas_phy_add(phy); 3150 if (error) { 3151 sas_phy_free(phy); 3152 goto out; 3153 } 3154 phy_info->phy = phy; 3155 } 3156 3157 if (!phy_info->attached.handle || 3158 !phy_info->port_details) 3159 goto out; 3160 3161 port = mptsas_get_port(phy_info); 3162 ioc = phy_to_ioc(phy_info->phy); 3163 3164 if (phy_info->sas_port_add_phy) { 3165 3166 if (!port) { 3167 port = sas_port_alloc_num(dev); 3168 if (!port) { 3169 error = -ENOMEM; 3170 goto out; 3171 } 3172 error = sas_port_add(port); 3173 if (error) { 3174 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT 3175 "%s: exit at line=%d\n", ioc->name, 3176 __func__, __LINE__)); 3177 goto out; 3178 } 3179 mptsas_set_port(ioc, phy_info, port); 3180 devtprintk(ioc, dev_printk(KERN_DEBUG, &port->dev, 3181 MYIOC_s_FMT "add port %d, sas_addr (0x%llx)\n", 3182 ioc->name, port->port_identifier, 3183 (unsigned long long)phy_info-> 3184 attached.sas_address)); 3185 } 3186 dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3187 "sas_port_add_phy: phy_id=%d\n", 3188 ioc->name, phy_info->phy_id)); 3189 sas_port_add_phy(port, phy_info->phy); 3190 phy_info->sas_port_add_phy = 0; 3191 devtprintk(ioc, dev_printk(KERN_DEBUG, &phy_info->phy->dev, 3192 MYIOC_s_FMT "add phy %d, phy-obj (0x%p)\n", ioc->name, 3193 phy_info->phy_id, phy_info->phy)); 3194 } 3195 if (!mptsas_get_rphy(phy_info) && port && !port->rphy) { 3196 3197 struct sas_rphy *rphy; 3198 struct device *parent; 3199 struct sas_identify identify; 3200 3201 parent = dev->parent->parent; 3202 /* 3203 * Let the hotplug_work thread handle processing 3204 * the adding/removing of devices that occur 3205 * after start of day. 3206 */ 3207 if (mptsas_is_end_device(&phy_info->attached) && 3208 phy_info->attached.handle_parent) { 3209 goto out; 3210 } 3211 3212 mptsas_parse_device_info(&identify, &phy_info->attached); 3213 if (scsi_is_host_device(parent)) { 3214 struct mptsas_portinfo *port_info; 3215 int i; 3216 3217 port_info = ioc->hba_port_info; 3218 3219 for (i = 0; i < port_info->num_phys; i++) 3220 if (port_info->phy_info[i].identify.sas_address == 3221 identify.sas_address) { 3222 sas_port_mark_backlink(port); 3223 goto out; 3224 } 3225 3226 } else if (scsi_is_sas_rphy(parent)) { 3227 struct sas_rphy *parent_rphy = dev_to_rphy(parent); 3228 if (identify.sas_address == 3229 parent_rphy->identify.sas_address) { 3230 sas_port_mark_backlink(port); 3231 goto out; 3232 } 3233 } 3234 3235 switch (identify.device_type) { 3236 case SAS_END_DEVICE: 3237 rphy = sas_end_device_alloc(port); 3238 break; 3239 case SAS_EDGE_EXPANDER_DEVICE: 3240 case SAS_FANOUT_EXPANDER_DEVICE: 3241 rphy = sas_expander_alloc(port, identify.device_type); 3242 break; 3243 default: 3244 rphy = NULL; 3245 break; 3246 } 3247 if (!rphy) { 3248 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT 3249 "%s: exit at line=%d\n", ioc->name, 3250 __func__, __LINE__)); 3251 goto out; 3252 } 3253 3254 rphy->identify = identify; 3255 error = sas_rphy_add(rphy); 3256 if (error) { 3257 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT 3258 "%s: exit at line=%d\n", ioc->name, 3259 __func__, __LINE__)); 3260 sas_rphy_free(rphy); 3261 goto out; 3262 } 3263 mptsas_set_rphy(ioc, phy_info, rphy); 3264 if (identify.device_type == SAS_EDGE_EXPANDER_DEVICE || 3265 identify.device_type == SAS_FANOUT_EXPANDER_DEVICE) 3266 mptsas_exp_repmanufacture_info(ioc, 3267 identify.sas_address, 3268 rphy_to_expander_device(rphy)); 3269 } 3270 3271 /* If the device exists,verify it wasn't previously flagged 3272 as a missing device. If so, clear it */ 3273 vtarget = mptsas_find_vtarget(ioc, 3274 phy_info->attached.channel, 3275 phy_info->attached.id); 3276 if (vtarget && vtarget->inDMD) { 3277 printk(KERN_INFO "Device returned, unsetting inDMD\n"); 3278 vtarget->inDMD = 0; 3279 } 3280 3281 out: 3282 return error; 3283 } 3284 3285 static int 3286 mptsas_probe_hba_phys(MPT_ADAPTER *ioc) 3287 { 3288 struct mptsas_portinfo *port_info, *hba; 3289 int error = -ENOMEM, i; 3290 3291 hba = kzalloc(sizeof(struct mptsas_portinfo), GFP_KERNEL); 3292 if (! hba) 3293 goto out; 3294 3295 error = mptsas_sas_io_unit_pg0(ioc, hba); 3296 if (error) 3297 goto out_free_port_info; 3298 3299 mptsas_sas_io_unit_pg1(ioc); 3300 mutex_lock(&ioc->sas_topology_mutex); 3301 port_info = ioc->hba_port_info; 3302 if (!port_info) { 3303 ioc->hba_port_info = port_info = hba; 3304 ioc->hba_port_num_phy = port_info->num_phys; 3305 list_add_tail(&port_info->list, &ioc->sas_topology); 3306 } else { 3307 for (i = 0; i < hba->num_phys; i++) { 3308 port_info->phy_info[i].negotiated_link_rate = 3309 hba->phy_info[i].negotiated_link_rate; 3310 port_info->phy_info[i].handle = 3311 hba->phy_info[i].handle; 3312 port_info->phy_info[i].port_id = 3313 hba->phy_info[i].port_id; 3314 } 3315 kfree(hba->phy_info); 3316 kfree(hba); 3317 hba = NULL; 3318 } 3319 mutex_unlock(&ioc->sas_topology_mutex); 3320 #if defined(CPQ_CIM) 3321 ioc->num_ports = port_info->num_phys; 3322 #endif 3323 for (i = 0; i < port_info->num_phys; i++) { 3324 mptsas_sas_phy_pg0(ioc, &port_info->phy_info[i], 3325 (MPI_SAS_PHY_PGAD_FORM_PHY_NUMBER << 3326 MPI_SAS_PHY_PGAD_FORM_SHIFT), i); 3327 port_info->phy_info[i].identify.handle = 3328 port_info->phy_info[i].handle; 3329 mptsas_sas_device_pg0(ioc, &port_info->phy_info[i].identify, 3330 (MPI_SAS_DEVICE_PGAD_FORM_HANDLE << 3331 MPI_SAS_DEVICE_PGAD_FORM_SHIFT), 3332 port_info->phy_info[i].identify.handle); 3333 if (!ioc->hba_port_sas_addr) 3334 ioc->hba_port_sas_addr = 3335 port_info->phy_info[i].identify.sas_address; 3336 port_info->phy_info[i].identify.phy_id = 3337 port_info->phy_info[i].phy_id = i; 3338 if (port_info->phy_info[i].attached.handle) 3339 mptsas_sas_device_pg0(ioc, 3340 &port_info->phy_info[i].attached, 3341 (MPI_SAS_DEVICE_PGAD_FORM_HANDLE << 3342 MPI_SAS_DEVICE_PGAD_FORM_SHIFT), 3343 port_info->phy_info[i].attached.handle); 3344 } 3345 3346 mptsas_setup_wide_ports(ioc, port_info); 3347 3348 for (i = 0; i < port_info->num_phys; i++, ioc->sas_index++) 3349 mptsas_probe_one_phy(&ioc->sh->shost_gendev, 3350 &port_info->phy_info[i], ioc->sas_index, 1); 3351 3352 return 0; 3353 3354 out_free_port_info: 3355 kfree(hba); 3356 out: 3357 return error; 3358 } 3359 3360 static void 3361 mptsas_expander_refresh(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info) 3362 { 3363 struct mptsas_portinfo *parent; 3364 struct device *parent_dev; 3365 struct sas_rphy *rphy; 3366 int i; 3367 u64 sas_address; /* expander sas address */ 3368 u32 handle; 3369 3370 handle = port_info->phy_info[0].handle; 3371 sas_address = port_info->phy_info[0].identify.sas_address; 3372 for (i = 0; i < port_info->num_phys; i++) { 3373 mptsas_sas_expander_pg1(ioc, &port_info->phy_info[i], 3374 (MPI_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM << 3375 MPI_SAS_EXPAND_PGAD_FORM_SHIFT), (i << 16) + handle); 3376 3377 mptsas_sas_device_pg0(ioc, 3378 &port_info->phy_info[i].identify, 3379 (MPI_SAS_DEVICE_PGAD_FORM_HANDLE << 3380 MPI_SAS_DEVICE_PGAD_FORM_SHIFT), 3381 port_info->phy_info[i].identify.handle); 3382 port_info->phy_info[i].identify.phy_id = 3383 port_info->phy_info[i].phy_id; 3384 3385 if (port_info->phy_info[i].attached.handle) { 3386 mptsas_sas_device_pg0(ioc, 3387 &port_info->phy_info[i].attached, 3388 (MPI_SAS_DEVICE_PGAD_FORM_HANDLE << 3389 MPI_SAS_DEVICE_PGAD_FORM_SHIFT), 3390 port_info->phy_info[i].attached.handle); 3391 port_info->phy_info[i].attached.phy_id = 3392 port_info->phy_info[i].phy_id; 3393 } 3394 } 3395 3396 mutex_lock(&ioc->sas_topology_mutex); 3397 parent = mptsas_find_portinfo_by_handle(ioc, 3398 port_info->phy_info[0].identify.handle_parent); 3399 if (!parent) { 3400 mutex_unlock(&ioc->sas_topology_mutex); 3401 return; 3402 } 3403 for (i = 0, parent_dev = NULL; i < parent->num_phys && !parent_dev; 3404 i++) { 3405 if (parent->phy_info[i].attached.sas_address == sas_address) { 3406 rphy = mptsas_get_rphy(&parent->phy_info[i]); 3407 parent_dev = &rphy->dev; 3408 } 3409 } 3410 mutex_unlock(&ioc->sas_topology_mutex); 3411 3412 mptsas_setup_wide_ports(ioc, port_info); 3413 for (i = 0; i < port_info->num_phys; i++, ioc->sas_index++) 3414 mptsas_probe_one_phy(parent_dev, &port_info->phy_info[i], 3415 ioc->sas_index, 0); 3416 } 3417 3418 static void 3419 mptsas_expander_event_add(MPT_ADAPTER *ioc, 3420 MpiEventDataSasExpanderStatusChange_t *expander_data) 3421 { 3422 struct mptsas_portinfo *port_info; 3423 int i; 3424 __le64 sas_address; 3425 3426 port_info = kzalloc(sizeof(struct mptsas_portinfo), GFP_KERNEL); 3427 if (!port_info) 3428 BUG(); 3429 port_info->num_phys = (expander_data->NumPhys) ? 3430 expander_data->NumPhys : 1; 3431 port_info->phy_info = kcalloc(port_info->num_phys, 3432 sizeof(struct mptsas_phyinfo), GFP_KERNEL); 3433 if (!port_info->phy_info) 3434 BUG(); 3435 memcpy(&sas_address, &expander_data->SASAddress, sizeof(__le64)); 3436 for (i = 0; i < port_info->num_phys; i++) { 3437 port_info->phy_info[i].portinfo = port_info; 3438 port_info->phy_info[i].handle = 3439 le16_to_cpu(expander_data->DevHandle); 3440 port_info->phy_info[i].identify.sas_address = 3441 le64_to_cpu(sas_address); 3442 port_info->phy_info[i].identify.handle_parent = 3443 le16_to_cpu(expander_data->ParentDevHandle); 3444 } 3445 3446 mutex_lock(&ioc->sas_topology_mutex); 3447 list_add_tail(&port_info->list, &ioc->sas_topology); 3448 mutex_unlock(&ioc->sas_topology_mutex); 3449 3450 printk(MYIOC_s_INFO_FMT "add expander: num_phys %d, " 3451 "sas_addr (0x%llx)\n", ioc->name, port_info->num_phys, 3452 (unsigned long long)sas_address); 3453 3454 mptsas_expander_refresh(ioc, port_info); 3455 } 3456 3457 /** 3458 * mptsas_delete_expander_siblings - remove siblings attached to expander 3459 * @ioc: Pointer to MPT_ADAPTER structure 3460 * @parent: the parent port_info object 3461 * @expander: the expander port_info object 3462 **/ 3463 static void 3464 mptsas_delete_expander_siblings(MPT_ADAPTER *ioc, struct mptsas_portinfo 3465 *parent, struct mptsas_portinfo *expander) 3466 { 3467 struct mptsas_phyinfo *phy_info; 3468 struct mptsas_portinfo *port_info; 3469 struct sas_rphy *rphy; 3470 int i; 3471 3472 phy_info = expander->phy_info; 3473 for (i = 0; i < expander->num_phys; i++, phy_info++) { 3474 rphy = mptsas_get_rphy(phy_info); 3475 if (!rphy) 3476 continue; 3477 if (rphy->identify.device_type == SAS_END_DEVICE) 3478 mptsas_del_end_device(ioc, phy_info); 3479 } 3480 3481 phy_info = expander->phy_info; 3482 for (i = 0; i < expander->num_phys; i++, phy_info++) { 3483 rphy = mptsas_get_rphy(phy_info); 3484 if (!rphy) 3485 continue; 3486 if (rphy->identify.device_type == 3487 MPI_SAS_DEVICE_INFO_EDGE_EXPANDER || 3488 rphy->identify.device_type == 3489 MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER) { 3490 port_info = mptsas_find_portinfo_by_sas_address(ioc, 3491 rphy->identify.sas_address); 3492 if (!port_info) 3493 continue; 3494 if (port_info == parent) /* backlink rphy */ 3495 continue; 3496 /* 3497 Delete this expander even if the expdevpage is exists 3498 because the parent expander is already deleted 3499 */ 3500 mptsas_expander_delete(ioc, port_info, 1); 3501 } 3502 } 3503 } 3504 3505 3506 /** 3507 * mptsas_expander_delete - remove this expander 3508 * @ioc: Pointer to MPT_ADAPTER structure 3509 * @port_info: expander port_info struct 3510 * @force: Flag to forcefully delete the expander 3511 * 3512 **/ 3513 3514 static void mptsas_expander_delete(MPT_ADAPTER *ioc, 3515 struct mptsas_portinfo *port_info, u8 force) 3516 { 3517 3518 struct mptsas_portinfo *parent; 3519 int i; 3520 u64 expander_sas_address; 3521 struct mptsas_phyinfo *phy_info; 3522 struct mptsas_portinfo buffer; 3523 struct mptsas_portinfo_details *port_details; 3524 struct sas_port *port; 3525 3526 if (!port_info) 3527 return; 3528 3529 /* see if expander is still there before deleting */ 3530 mptsas_sas_expander_pg0(ioc, &buffer, 3531 (MPI_SAS_EXPAND_PGAD_FORM_HANDLE << 3532 MPI_SAS_EXPAND_PGAD_FORM_SHIFT), 3533 port_info->phy_info[0].identify.handle); 3534 3535 if (buffer.num_phys) { 3536 kfree(buffer.phy_info); 3537 if (!force) 3538 return; 3539 } 3540 3541 3542 /* 3543 * Obtain the port_info instance to the parent port 3544 */ 3545 port_details = NULL; 3546 expander_sas_address = 3547 port_info->phy_info[0].identify.sas_address; 3548 parent = mptsas_find_portinfo_by_handle(ioc, 3549 port_info->phy_info[0].identify.handle_parent); 3550 mptsas_delete_expander_siblings(ioc, parent, port_info); 3551 if (!parent) 3552 goto out; 3553 3554 /* 3555 * Delete rphys in the parent that point 3556 * to this expander. 3557 */ 3558 phy_info = parent->phy_info; 3559 port = NULL; 3560 for (i = 0; i < parent->num_phys; i++, phy_info++) { 3561 if (!phy_info->phy) 3562 continue; 3563 if (phy_info->attached.sas_address != 3564 expander_sas_address) 3565 continue; 3566 if (!port) { 3567 port = mptsas_get_port(phy_info); 3568 port_details = phy_info->port_details; 3569 } 3570 dev_printk(KERN_DEBUG, &phy_info->phy->dev, 3571 MYIOC_s_FMT "delete phy %d, phy-obj (0x%p)\n", ioc->name, 3572 phy_info->phy_id, phy_info->phy); 3573 sas_port_delete_phy(port, phy_info->phy); 3574 } 3575 if (port) { 3576 dev_printk(KERN_DEBUG, &port->dev, 3577 MYIOC_s_FMT "delete port %d, sas_addr (0x%llx)\n", 3578 ioc->name, port->port_identifier, 3579 (unsigned long long)expander_sas_address); 3580 sas_port_delete(port); 3581 mptsas_port_delete(ioc, port_details); 3582 } 3583 out: 3584 3585 printk(MYIOC_s_INFO_FMT "delete expander: num_phys %d, " 3586 "sas_addr (0x%llx)\n", ioc->name, port_info->num_phys, 3587 (unsigned long long)expander_sas_address); 3588 3589 /* 3590 * free link 3591 */ 3592 list_del(&port_info->list); 3593 kfree(port_info->phy_info); 3594 kfree(port_info); 3595 } 3596 3597 3598 /** 3599 * mptsas_send_expander_event - expanders events 3600 * @ioc: Pointer to MPT_ADAPTER structure 3601 * @expander_data: event data 3602 * 3603 * 3604 * This function handles adding, removing, and refreshing 3605 * device handles within the expander objects. 3606 */ 3607 static void 3608 mptsas_send_expander_event(struct fw_event_work *fw_event) 3609 { 3610 MPT_ADAPTER *ioc; 3611 MpiEventDataSasExpanderStatusChange_t *expander_data; 3612 struct mptsas_portinfo *port_info; 3613 __le64 sas_address; 3614 int i; 3615 3616 ioc = fw_event->ioc; 3617 expander_data = (MpiEventDataSasExpanderStatusChange_t *) 3618 fw_event->event_data; 3619 memcpy(&sas_address, &expander_data->SASAddress, sizeof(__le64)); 3620 sas_address = le64_to_cpu(sas_address); 3621 port_info = mptsas_find_portinfo_by_sas_address(ioc, sas_address); 3622 3623 if (expander_data->ReasonCode == MPI_EVENT_SAS_EXP_RC_ADDED) { 3624 if (port_info) { 3625 for (i = 0; i < port_info->num_phys; i++) { 3626 port_info->phy_info[i].portinfo = port_info; 3627 port_info->phy_info[i].handle = 3628 le16_to_cpu(expander_data->DevHandle); 3629 port_info->phy_info[i].identify.sas_address = 3630 le64_to_cpu(sas_address); 3631 port_info->phy_info[i].identify.handle_parent = 3632 le16_to_cpu(expander_data->ParentDevHandle); 3633 } 3634 mptsas_expander_refresh(ioc, port_info); 3635 } else if (!port_info && expander_data->NumPhys) 3636 mptsas_expander_event_add(ioc, expander_data); 3637 } else if (expander_data->ReasonCode == 3638 MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING) 3639 mptsas_expander_delete(ioc, port_info, 0); 3640 3641 mptsas_free_fw_event(ioc, fw_event); 3642 } 3643 3644 3645 /** 3646 * mptsas_expander_add - 3647 * @ioc: Pointer to MPT_ADAPTER structure 3648 * @handle: 3649 * 3650 */ 3651 struct mptsas_portinfo * 3652 mptsas_expander_add(MPT_ADAPTER *ioc, u16 handle) 3653 { 3654 struct mptsas_portinfo buffer, *port_info; 3655 int i; 3656 3657 if ((mptsas_sas_expander_pg0(ioc, &buffer, 3658 (MPI_SAS_EXPAND_PGAD_FORM_HANDLE << 3659 MPI_SAS_EXPAND_PGAD_FORM_SHIFT), handle))) 3660 return NULL; 3661 3662 port_info = kzalloc(sizeof(struct mptsas_portinfo), GFP_ATOMIC); 3663 if (!port_info) { 3664 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT 3665 "%s: exit at line=%d\n", ioc->name, 3666 __func__, __LINE__)); 3667 return NULL; 3668 } 3669 port_info->num_phys = buffer.num_phys; 3670 port_info->phy_info = buffer.phy_info; 3671 for (i = 0; i < port_info->num_phys; i++) 3672 port_info->phy_info[i].portinfo = port_info; 3673 mutex_lock(&ioc->sas_topology_mutex); 3674 list_add_tail(&port_info->list, &ioc->sas_topology); 3675 mutex_unlock(&ioc->sas_topology_mutex); 3676 printk(MYIOC_s_INFO_FMT "add expander: num_phys %d, " 3677 "sas_addr (0x%llx)\n", ioc->name, port_info->num_phys, 3678 (unsigned long long)buffer.phy_info[0].identify.sas_address); 3679 mptsas_expander_refresh(ioc, port_info); 3680 return port_info; 3681 } 3682 3683 static void 3684 mptsas_send_link_status_event(struct fw_event_work *fw_event) 3685 { 3686 MPT_ADAPTER *ioc; 3687 MpiEventDataSasPhyLinkStatus_t *link_data; 3688 struct mptsas_portinfo *port_info; 3689 struct mptsas_phyinfo *phy_info = NULL; 3690 __le64 sas_address; 3691 u8 phy_num; 3692 u8 link_rate; 3693 3694 ioc = fw_event->ioc; 3695 link_data = (MpiEventDataSasPhyLinkStatus_t *)fw_event->event_data; 3696 3697 memcpy(&sas_address, &link_data->SASAddress, sizeof(__le64)); 3698 sas_address = le64_to_cpu(sas_address); 3699 link_rate = link_data->LinkRates >> 4; 3700 phy_num = link_data->PhyNum; 3701 3702 port_info = mptsas_find_portinfo_by_sas_address(ioc, sas_address); 3703 if (port_info) { 3704 phy_info = &port_info->phy_info[phy_num]; 3705 if (phy_info) 3706 phy_info->negotiated_link_rate = link_rate; 3707 } 3708 3709 if (link_rate == MPI_SAS_IOUNIT0_RATE_1_5 || 3710 link_rate == MPI_SAS_IOUNIT0_RATE_3_0 || 3711 link_rate == MPI_SAS_IOUNIT0_RATE_6_0) { 3712 3713 if (!port_info) { 3714 if (ioc->old_sas_discovery_protocal) { 3715 port_info = mptsas_expander_add(ioc, 3716 le16_to_cpu(link_data->DevHandle)); 3717 if (port_info) 3718 goto out; 3719 } 3720 goto out; 3721 } 3722 3723 if (port_info == ioc->hba_port_info) 3724 mptsas_probe_hba_phys(ioc); 3725 else 3726 mptsas_expander_refresh(ioc, port_info); 3727 } else if (phy_info && phy_info->phy) { 3728 if (link_rate == MPI_SAS_IOUNIT0_RATE_PHY_DISABLED) 3729 phy_info->phy->negotiated_linkrate = 3730 SAS_PHY_DISABLED; 3731 else if (link_rate == 3732 MPI_SAS_IOUNIT0_RATE_FAILED_SPEED_NEGOTIATION) 3733 phy_info->phy->negotiated_linkrate = 3734 SAS_LINK_RATE_FAILED; 3735 else { 3736 phy_info->phy->negotiated_linkrate = 3737 SAS_LINK_RATE_UNKNOWN; 3738 if (ioc->device_missing_delay && 3739 mptsas_is_end_device(&phy_info->attached)) { 3740 struct scsi_device *sdev; 3741 VirtDevice *vdevice; 3742 u8 channel, id; 3743 id = phy_info->attached.id; 3744 channel = phy_info->attached.channel; 3745 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3746 "Link down for fw_id %d:fw_channel %d\n", 3747 ioc->name, phy_info->attached.id, 3748 phy_info->attached.channel)); 3749 3750 shost_for_each_device(sdev, ioc->sh) { 3751 vdevice = sdev->hostdata; 3752 if ((vdevice == NULL) || 3753 (vdevice->vtarget == NULL)) 3754 continue; 3755 if ((vdevice->vtarget->tflags & 3756 MPT_TARGET_FLAGS_RAID_COMPONENT || 3757 vdevice->vtarget->raidVolume)) 3758 continue; 3759 if (vdevice->vtarget->id == id && 3760 vdevice->vtarget->channel == 3761 channel) 3762 devtprintk(ioc, 3763 printk(MYIOC_s_DEBUG_FMT 3764 "SDEV OUTSTANDING CMDS" 3765 "%d\n", ioc->name, 3766 sdev->device_busy)); 3767 } 3768 3769 } 3770 } 3771 } 3772 out: 3773 mptsas_free_fw_event(ioc, fw_event); 3774 } 3775 3776 static void 3777 mptsas_not_responding_devices(MPT_ADAPTER *ioc) 3778 { 3779 struct mptsas_portinfo buffer, *port_info; 3780 struct mptsas_device_info *sas_info; 3781 struct mptsas_devinfo sas_device; 3782 u32 handle; 3783 VirtTarget *vtarget = NULL; 3784 struct mptsas_phyinfo *phy_info; 3785 u8 found_expander; 3786 int retval, retry_count; 3787 unsigned long flags; 3788 3789 mpt_findImVolumes(ioc); 3790 3791 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 3792 if (ioc->ioc_reset_in_progress) { 3793 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3794 "%s: exiting due to a parallel reset \n", ioc->name, 3795 __func__)); 3796 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 3797 return; 3798 } 3799 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 3800 3801 /* devices, logical volumes */ 3802 mutex_lock(&ioc->sas_device_info_mutex); 3803 redo_device_scan: 3804 list_for_each_entry(sas_info, &ioc->sas_device_info_list, list) { 3805 if (sas_info->is_cached) 3806 continue; 3807 if (!sas_info->is_logical_volume) { 3808 sas_device.handle = 0; 3809 retry_count = 0; 3810 retry_page: 3811 retval = mptsas_sas_device_pg0(ioc, &sas_device, 3812 (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID 3813 << MPI_SAS_DEVICE_PGAD_FORM_SHIFT), 3814 (sas_info->fw.channel << 8) + 3815 sas_info->fw.id); 3816 3817 if (sas_device.handle) 3818 continue; 3819 if (retval == -EBUSY) { 3820 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 3821 if (ioc->ioc_reset_in_progress) { 3822 dfailprintk(ioc, 3823 printk(MYIOC_s_DEBUG_FMT 3824 "%s: exiting due to reset\n", 3825 ioc->name, __func__)); 3826 spin_unlock_irqrestore 3827 (&ioc->taskmgmt_lock, flags); 3828 mutex_unlock(&ioc-> 3829 sas_device_info_mutex); 3830 return; 3831 } 3832 spin_unlock_irqrestore(&ioc->taskmgmt_lock, 3833 flags); 3834 } 3835 3836 if (retval && (retval != -ENODEV)) { 3837 if (retry_count < 10) { 3838 retry_count++; 3839 goto retry_page; 3840 } else { 3841 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3842 "%s: Config page retry exceeded retry " 3843 "count deleting device 0x%llx\n", 3844 ioc->name, __func__, 3845 sas_info->sas_address)); 3846 } 3847 } 3848 3849 /* delete device */ 3850 vtarget = mptsas_find_vtarget(ioc, 3851 sas_info->fw.channel, sas_info->fw.id); 3852 3853 if (vtarget) 3854 vtarget->deleted = 1; 3855 3856 phy_info = mptsas_find_phyinfo_by_sas_address(ioc, 3857 sas_info->sas_address); 3858 3859 if (phy_info) { 3860 mptsas_del_end_device(ioc, phy_info); 3861 goto redo_device_scan; 3862 } 3863 } else 3864 mptsas_volume_delete(ioc, sas_info->fw.id); 3865 } 3866 mutex_unlock(&ioc->sas_device_info_mutex); 3867 3868 /* expanders */ 3869 mutex_lock(&ioc->sas_topology_mutex); 3870 redo_expander_scan: 3871 list_for_each_entry(port_info, &ioc->sas_topology, list) { 3872 3873 if (port_info->phy_info && 3874 (!(port_info->phy_info[0].identify.device_info & 3875 MPI_SAS_DEVICE_INFO_SMP_TARGET))) 3876 continue; 3877 found_expander = 0; 3878 handle = 0xFFFF; 3879 while (!mptsas_sas_expander_pg0(ioc, &buffer, 3880 (MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE << 3881 MPI_SAS_EXPAND_PGAD_FORM_SHIFT), handle) && 3882 !found_expander) { 3883 3884 handle = buffer.phy_info[0].handle; 3885 if (buffer.phy_info[0].identify.sas_address == 3886 port_info->phy_info[0].identify.sas_address) { 3887 found_expander = 1; 3888 } 3889 kfree(buffer.phy_info); 3890 } 3891 3892 if (!found_expander) { 3893 mptsas_expander_delete(ioc, port_info, 0); 3894 goto redo_expander_scan; 3895 } 3896 } 3897 mutex_unlock(&ioc->sas_topology_mutex); 3898 } 3899 3900 /** 3901 * mptsas_probe_expanders - adding expanders 3902 * @ioc: Pointer to MPT_ADAPTER structure 3903 * 3904 **/ 3905 static void 3906 mptsas_probe_expanders(MPT_ADAPTER *ioc) 3907 { 3908 struct mptsas_portinfo buffer, *port_info; 3909 u32 handle; 3910 int i; 3911 3912 handle = 0xFFFF; 3913 while (!mptsas_sas_expander_pg0(ioc, &buffer, 3914 (MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE << 3915 MPI_SAS_EXPAND_PGAD_FORM_SHIFT), handle)) { 3916 3917 handle = buffer.phy_info[0].handle; 3918 port_info = mptsas_find_portinfo_by_sas_address(ioc, 3919 buffer.phy_info[0].identify.sas_address); 3920 3921 if (port_info) { 3922 /* refreshing handles */ 3923 for (i = 0; i < buffer.num_phys; i++) { 3924 port_info->phy_info[i].handle = handle; 3925 port_info->phy_info[i].identify.handle_parent = 3926 buffer.phy_info[0].identify.handle_parent; 3927 } 3928 mptsas_expander_refresh(ioc, port_info); 3929 kfree(buffer.phy_info); 3930 continue; 3931 } 3932 3933 port_info = kzalloc(sizeof(struct mptsas_portinfo), GFP_KERNEL); 3934 if (!port_info) { 3935 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT 3936 "%s: exit at line=%d\n", ioc->name, 3937 __func__, __LINE__)); 3938 return; 3939 } 3940 port_info->num_phys = buffer.num_phys; 3941 port_info->phy_info = buffer.phy_info; 3942 for (i = 0; i < port_info->num_phys; i++) 3943 port_info->phy_info[i].portinfo = port_info; 3944 mutex_lock(&ioc->sas_topology_mutex); 3945 list_add_tail(&port_info->list, &ioc->sas_topology); 3946 mutex_unlock(&ioc->sas_topology_mutex); 3947 printk(MYIOC_s_INFO_FMT "add expander: num_phys %d, " 3948 "sas_addr (0x%llx)\n", ioc->name, port_info->num_phys, 3949 (unsigned long long)buffer.phy_info[0].identify.sas_address); 3950 mptsas_expander_refresh(ioc, port_info); 3951 } 3952 } 3953 3954 static void 3955 mptsas_probe_devices(MPT_ADAPTER *ioc) 3956 { 3957 u16 handle; 3958 struct mptsas_devinfo sas_device; 3959 struct mptsas_phyinfo *phy_info; 3960 3961 handle = 0xFFFF; 3962 while (!(mptsas_sas_device_pg0(ioc, &sas_device, 3963 MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE, handle))) { 3964 3965 handle = sas_device.handle; 3966 3967 if ((sas_device.device_info & 3968 (MPI_SAS_DEVICE_INFO_SSP_TARGET | 3969 MPI_SAS_DEVICE_INFO_STP_TARGET | 3970 MPI_SAS_DEVICE_INFO_SATA_DEVICE)) == 0) 3971 continue; 3972 3973 /* If there is no FW B_T mapping for this device then continue 3974 * */ 3975 if (!(sas_device.flags & MPI_SAS_DEVICE0_FLAGS_DEVICE_PRESENT) 3976 || !(sas_device.flags & 3977 MPI_SAS_DEVICE0_FLAGS_DEVICE_MAPPED)) 3978 continue; 3979 3980 phy_info = mptsas_refreshing_device_handles(ioc, &sas_device); 3981 if (!phy_info) 3982 continue; 3983 3984 if (mptsas_get_rphy(phy_info)) 3985 continue; 3986 3987 mptsas_add_end_device(ioc, phy_info); 3988 } 3989 } 3990 3991 /** 3992 * mptsas_scan_sas_topology - 3993 * @ioc: Pointer to MPT_ADAPTER structure 3994 * @sas_address: 3995 * 3996 **/ 3997 static void 3998 mptsas_scan_sas_topology(MPT_ADAPTER *ioc) 3999 { 4000 struct scsi_device *sdev; 4001 int i; 4002 4003 mptsas_probe_hba_phys(ioc); 4004 mptsas_probe_expanders(ioc); 4005 mptsas_probe_devices(ioc); 4006 4007 /* 4008 Reporting RAID volumes. 4009 */ 4010 if (!ioc->ir_firmware || !ioc->raid_data.pIocPg2 || 4011 !ioc->raid_data.pIocPg2->NumActiveVolumes) 4012 return; 4013 for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) { 4014 sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL, 4015 ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID, 0); 4016 if (sdev) { 4017 scsi_device_put(sdev); 4018 continue; 4019 } 4020 printk(MYIOC_s_INFO_FMT "attaching raid volume, channel %d, " 4021 "id %d\n", ioc->name, MPTSAS_RAID_CHANNEL, 4022 ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID); 4023 scsi_add_device(ioc->sh, MPTSAS_RAID_CHANNEL, 4024 ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID, 0); 4025 } 4026 } 4027 4028 4029 static void 4030 mptsas_handle_queue_full_event(struct fw_event_work *fw_event) 4031 { 4032 MPT_ADAPTER *ioc; 4033 EventDataQueueFull_t *qfull_data; 4034 struct mptsas_device_info *sas_info; 4035 struct scsi_device *sdev; 4036 int depth; 4037 int id = -1; 4038 int channel = -1; 4039 int fw_id, fw_channel; 4040 u16 current_depth; 4041 4042 4043 ioc = fw_event->ioc; 4044 qfull_data = (EventDataQueueFull_t *)fw_event->event_data; 4045 fw_id = qfull_data->TargetID; 4046 fw_channel = qfull_data->Bus; 4047 current_depth = le16_to_cpu(qfull_data->CurrentDepth); 4048 4049 /* if hidden raid component, look for the volume id */ 4050 mutex_lock(&ioc->sas_device_info_mutex); 4051 if (mptscsih_is_phys_disk(ioc, fw_channel, fw_id)) { 4052 list_for_each_entry(sas_info, &ioc->sas_device_info_list, 4053 list) { 4054 if (sas_info->is_cached || 4055 sas_info->is_logical_volume) 4056 continue; 4057 if (sas_info->is_hidden_raid_component && 4058 (sas_info->fw.channel == fw_channel && 4059 sas_info->fw.id == fw_id)) { 4060 id = sas_info->volume_id; 4061 channel = MPTSAS_RAID_CHANNEL; 4062 goto out; 4063 } 4064 } 4065 } else { 4066 list_for_each_entry(sas_info, &ioc->sas_device_info_list, 4067 list) { 4068 if (sas_info->is_cached || 4069 sas_info->is_hidden_raid_component || 4070 sas_info->is_logical_volume) 4071 continue; 4072 if (sas_info->fw.channel == fw_channel && 4073 sas_info->fw.id == fw_id) { 4074 id = sas_info->os.id; 4075 channel = sas_info->os.channel; 4076 goto out; 4077 } 4078 } 4079 4080 } 4081 4082 out: 4083 mutex_unlock(&ioc->sas_device_info_mutex); 4084 4085 if (id != -1) { 4086 shost_for_each_device(sdev, ioc->sh) { 4087 if (sdev->id == id && sdev->channel == channel) { 4088 if (current_depth > sdev->queue_depth) { 4089 sdev_printk(KERN_INFO, sdev, 4090 "strange observation, the queue " 4091 "depth is (%d) meanwhile fw queue " 4092 "depth (%d)\n", sdev->queue_depth, 4093 current_depth); 4094 continue; 4095 } 4096 depth = scsi_track_queue_full(sdev, 4097 current_depth - 1); 4098 if (depth > 0) 4099 sdev_printk(KERN_INFO, sdev, 4100 "Queue depth reduced to (%d)\n", 4101 depth); 4102 else if (depth < 0) 4103 sdev_printk(KERN_INFO, sdev, 4104 "Tagged Command Queueing is being " 4105 "disabled\n"); 4106 else if (depth == 0) 4107 sdev_printk(KERN_INFO, sdev, 4108 "Queue depth not changed yet\n"); 4109 } 4110 } 4111 } 4112 4113 mptsas_free_fw_event(ioc, fw_event); 4114 } 4115 4116 4117 static struct mptsas_phyinfo * 4118 mptsas_find_phyinfo_by_sas_address(MPT_ADAPTER *ioc, u64 sas_address) 4119 { 4120 struct mptsas_portinfo *port_info; 4121 struct mptsas_phyinfo *phy_info = NULL; 4122 int i; 4123 4124 mutex_lock(&ioc->sas_topology_mutex); 4125 list_for_each_entry(port_info, &ioc->sas_topology, list) { 4126 for (i = 0; i < port_info->num_phys; i++) { 4127 if (!mptsas_is_end_device( 4128 &port_info->phy_info[i].attached)) 4129 continue; 4130 if (port_info->phy_info[i].attached.sas_address 4131 != sas_address) 4132 continue; 4133 phy_info = &port_info->phy_info[i]; 4134 break; 4135 } 4136 } 4137 mutex_unlock(&ioc->sas_topology_mutex); 4138 return phy_info; 4139 } 4140 4141 /** 4142 * mptsas_find_phyinfo_by_phys_disk_num - 4143 * @ioc: Pointer to MPT_ADAPTER structure 4144 * @phys_disk_num: 4145 * @channel: 4146 * @id: 4147 * 4148 **/ 4149 static struct mptsas_phyinfo * 4150 mptsas_find_phyinfo_by_phys_disk_num(MPT_ADAPTER *ioc, u8 phys_disk_num, 4151 u8 channel, u8 id) 4152 { 4153 struct mptsas_phyinfo *phy_info = NULL; 4154 struct mptsas_portinfo *port_info; 4155 RaidPhysDiskPage1_t *phys_disk = NULL; 4156 int num_paths; 4157 u64 sas_address = 0; 4158 int i; 4159 4160 phy_info = NULL; 4161 if (!ioc->raid_data.pIocPg3) 4162 return NULL; 4163 /* dual port support */ 4164 num_paths = mpt_raid_phys_disk_get_num_paths(ioc, phys_disk_num); 4165 if (!num_paths) 4166 goto out; 4167 phys_disk = kzalloc(offsetof(RaidPhysDiskPage1_t, Path) + 4168 (num_paths * sizeof(RAID_PHYS_DISK1_PATH)), GFP_KERNEL); 4169 if (!phys_disk) 4170 goto out; 4171 mpt_raid_phys_disk_pg1(ioc, phys_disk_num, phys_disk); 4172 for (i = 0; i < num_paths; i++) { 4173 if ((phys_disk->Path[i].Flags & 1) != 0) 4174 /* entry no longer valid */ 4175 continue; 4176 if ((id == phys_disk->Path[i].PhysDiskID) && 4177 (channel == phys_disk->Path[i].PhysDiskBus)) { 4178 memcpy(&sas_address, &phys_disk->Path[i].WWID, 4179 sizeof(u64)); 4180 phy_info = mptsas_find_phyinfo_by_sas_address(ioc, 4181 sas_address); 4182 goto out; 4183 } 4184 } 4185 4186 out: 4187 kfree(phys_disk); 4188 if (phy_info) 4189 return phy_info; 4190 4191 /* 4192 * Extra code to handle RAID0 case, where the sas_address is not updated 4193 * in phys_disk_page_1 when hotswapped 4194 */ 4195 mutex_lock(&ioc->sas_topology_mutex); 4196 list_for_each_entry(port_info, &ioc->sas_topology, list) { 4197 for (i = 0; i < port_info->num_phys && !phy_info; i++) { 4198 if (!mptsas_is_end_device( 4199 &port_info->phy_info[i].attached)) 4200 continue; 4201 if (port_info->phy_info[i].attached.phys_disk_num == ~0) 4202 continue; 4203 if ((port_info->phy_info[i].attached.phys_disk_num == 4204 phys_disk_num) && 4205 (port_info->phy_info[i].attached.id == id) && 4206 (port_info->phy_info[i].attached.channel == 4207 channel)) 4208 phy_info = &port_info->phy_info[i]; 4209 } 4210 } 4211 mutex_unlock(&ioc->sas_topology_mutex); 4212 return phy_info; 4213 } 4214 4215 static void 4216 mptsas_reprobe_lun(struct scsi_device *sdev, void *data) 4217 { 4218 int rc; 4219 4220 sdev->no_uld_attach = data ? 1 : 0; 4221 rc = scsi_device_reprobe(sdev); 4222 } 4223 4224 static void 4225 mptsas_reprobe_target(struct scsi_target *starget, int uld_attach) 4226 { 4227 starget_for_each_device(starget, uld_attach ? (void *)1 : NULL, 4228 mptsas_reprobe_lun); 4229 } 4230 4231 static void 4232 mptsas_adding_inactive_raid_components(MPT_ADAPTER *ioc, u8 channel, u8 id) 4233 { 4234 CONFIGPARMS cfg; 4235 ConfigPageHeader_t hdr; 4236 dma_addr_t dma_handle; 4237 pRaidVolumePage0_t buffer = NULL; 4238 RaidPhysDiskPage0_t phys_disk; 4239 int i; 4240 struct mptsas_phyinfo *phy_info; 4241 struct mptsas_devinfo sas_device; 4242 4243 memset(&cfg, 0 , sizeof(CONFIGPARMS)); 4244 memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); 4245 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME; 4246 cfg.pageAddr = (channel << 8) + id; 4247 cfg.cfghdr.hdr = &hdr; 4248 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 4249 cfg.timeout = SAS_CONFIG_PAGE_TIMEOUT; 4250 4251 if (mpt_config(ioc, &cfg) != 0) 4252 goto out; 4253 4254 if (!hdr.PageLength) 4255 goto out; 4256 4257 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, 4258 &dma_handle); 4259 4260 if (!buffer) 4261 goto out; 4262 4263 cfg.physAddr = dma_handle; 4264 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 4265 4266 if (mpt_config(ioc, &cfg) != 0) 4267 goto out; 4268 4269 if (!(buffer->VolumeStatus.Flags & 4270 MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE)) 4271 goto out; 4272 4273 if (!buffer->NumPhysDisks) 4274 goto out; 4275 4276 for (i = 0; i < buffer->NumPhysDisks; i++) { 4277 4278 if (mpt_raid_phys_disk_pg0(ioc, 4279 buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0) 4280 continue; 4281 4282 if (mptsas_sas_device_pg0(ioc, &sas_device, 4283 (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID << 4284 MPI_SAS_DEVICE_PGAD_FORM_SHIFT), 4285 (phys_disk.PhysDiskBus << 8) + 4286 phys_disk.PhysDiskID)) 4287 continue; 4288 4289 /* If there is no FW B_T mapping for this device then continue 4290 * */ 4291 if (!(sas_device.flags & MPI_SAS_DEVICE0_FLAGS_DEVICE_PRESENT) 4292 || !(sas_device.flags & 4293 MPI_SAS_DEVICE0_FLAGS_DEVICE_MAPPED)) 4294 continue; 4295 4296 4297 phy_info = mptsas_find_phyinfo_by_sas_address(ioc, 4298 sas_device.sas_address); 4299 mptsas_add_end_device(ioc, phy_info); 4300 } 4301 4302 out: 4303 if (buffer) 4304 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer, 4305 dma_handle); 4306 } 4307 /* 4308 * Work queue thread to handle SAS hotplug events 4309 */ 4310 static void 4311 mptsas_hotplug_work(MPT_ADAPTER *ioc, struct fw_event_work *fw_event, 4312 struct mptsas_hotplug_event *hot_plug_info) 4313 { 4314 struct mptsas_phyinfo *phy_info; 4315 struct scsi_target * starget; 4316 struct mptsas_devinfo sas_device; 4317 VirtTarget *vtarget; 4318 int i; 4319 struct mptsas_portinfo *port_info; 4320 4321 switch (hot_plug_info->event_type) { 4322 4323 case MPTSAS_ADD_PHYSDISK: 4324 4325 if (!ioc->raid_data.pIocPg2) 4326 break; 4327 4328 for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) { 4329 if (ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID == 4330 hot_plug_info->id) { 4331 printk(MYIOC_s_WARN_FMT "firmware bug: unable " 4332 "to add hidden disk - target_id matchs " 4333 "volume_id\n", ioc->name); 4334 mptsas_free_fw_event(ioc, fw_event); 4335 return; 4336 } 4337 } 4338 mpt_findImVolumes(ioc); 4339 4340 case MPTSAS_ADD_DEVICE: 4341 memset(&sas_device, 0, sizeof(struct mptsas_devinfo)); 4342 mptsas_sas_device_pg0(ioc, &sas_device, 4343 (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID << 4344 MPI_SAS_DEVICE_PGAD_FORM_SHIFT), 4345 (hot_plug_info->channel << 8) + 4346 hot_plug_info->id); 4347 4348 /* If there is no FW B_T mapping for this device then break 4349 * */ 4350 if (!(sas_device.flags & MPI_SAS_DEVICE0_FLAGS_DEVICE_PRESENT) 4351 || !(sas_device.flags & 4352 MPI_SAS_DEVICE0_FLAGS_DEVICE_MAPPED)) 4353 break; 4354 4355 if (!sas_device.handle) 4356 return; 4357 4358 phy_info = mptsas_refreshing_device_handles(ioc, &sas_device); 4359 /* Only For SATA Device ADD */ 4360 if (!phy_info && (sas_device.device_info & 4361 MPI_SAS_DEVICE_INFO_SATA_DEVICE)) { 4362 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT 4363 "%s %d SATA HOT PLUG: " 4364 "parent handle of device %x\n", ioc->name, 4365 __func__, __LINE__, sas_device.handle_parent)); 4366 port_info = mptsas_find_portinfo_by_handle(ioc, 4367 sas_device.handle_parent); 4368 4369 if (port_info == ioc->hba_port_info) 4370 mptsas_probe_hba_phys(ioc); 4371 else if (port_info) 4372 mptsas_expander_refresh(ioc, port_info); 4373 else { 4374 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT 4375 "%s %d port info is NULL\n", 4376 ioc->name, __func__, __LINE__)); 4377 break; 4378 } 4379 phy_info = mptsas_refreshing_device_handles 4380 (ioc, &sas_device); 4381 } 4382 4383 if (!phy_info) { 4384 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT 4385 "%s %d phy info is NULL\n", 4386 ioc->name, __func__, __LINE__)); 4387 break; 4388 } 4389 4390 if (mptsas_get_rphy(phy_info)) 4391 break; 4392 4393 mptsas_add_end_device(ioc, phy_info); 4394 break; 4395 4396 case MPTSAS_DEL_DEVICE: 4397 phy_info = mptsas_find_phyinfo_by_sas_address(ioc, 4398 hot_plug_info->sas_address); 4399 mptsas_del_end_device(ioc, phy_info); 4400 break; 4401 4402 case MPTSAS_DEL_PHYSDISK: 4403 4404 mpt_findImVolumes(ioc); 4405 4406 phy_info = mptsas_find_phyinfo_by_phys_disk_num( 4407 ioc, hot_plug_info->phys_disk_num, 4408 hot_plug_info->channel, 4409 hot_plug_info->id); 4410 mptsas_del_end_device(ioc, phy_info); 4411 break; 4412 4413 case MPTSAS_ADD_PHYSDISK_REPROBE: 4414 4415 if (mptsas_sas_device_pg0(ioc, &sas_device, 4416 (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID << 4417 MPI_SAS_DEVICE_PGAD_FORM_SHIFT), 4418 (hot_plug_info->channel << 8) + hot_plug_info->id)) { 4419 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT 4420 "%s: fw_id=%d exit at line=%d\n", ioc->name, 4421 __func__, hot_plug_info->id, __LINE__)); 4422 break; 4423 } 4424 4425 /* If there is no FW B_T mapping for this device then break 4426 * */ 4427 if (!(sas_device.flags & MPI_SAS_DEVICE0_FLAGS_DEVICE_PRESENT) 4428 || !(sas_device.flags & 4429 MPI_SAS_DEVICE0_FLAGS_DEVICE_MAPPED)) 4430 break; 4431 4432 phy_info = mptsas_find_phyinfo_by_sas_address( 4433 ioc, sas_device.sas_address); 4434 4435 if (!phy_info) { 4436 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT 4437 "%s: fw_id=%d exit at line=%d\n", ioc->name, 4438 __func__, hot_plug_info->id, __LINE__)); 4439 break; 4440 } 4441 4442 starget = mptsas_get_starget(phy_info); 4443 if (!starget) { 4444 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT 4445 "%s: fw_id=%d exit at line=%d\n", ioc->name, 4446 __func__, hot_plug_info->id, __LINE__)); 4447 break; 4448 } 4449 4450 vtarget = starget->hostdata; 4451 if (!vtarget) { 4452 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT 4453 "%s: fw_id=%d exit at line=%d\n", ioc->name, 4454 __func__, hot_plug_info->id, __LINE__)); 4455 break; 4456 } 4457 4458 mpt_findImVolumes(ioc); 4459 4460 starget_printk(KERN_INFO, starget, MYIOC_s_FMT "RAID Hidding: " 4461 "fw_channel=%d, fw_id=%d, physdsk %d, sas_addr 0x%llx\n", 4462 ioc->name, hot_plug_info->channel, hot_plug_info->id, 4463 hot_plug_info->phys_disk_num, (unsigned long long) 4464 sas_device.sas_address); 4465 4466 vtarget->id = hot_plug_info->phys_disk_num; 4467 vtarget->tflags |= MPT_TARGET_FLAGS_RAID_COMPONENT; 4468 phy_info->attached.phys_disk_num = hot_plug_info->phys_disk_num; 4469 mptsas_reprobe_target(starget, 1); 4470 break; 4471 4472 case MPTSAS_DEL_PHYSDISK_REPROBE: 4473 4474 if (mptsas_sas_device_pg0(ioc, &sas_device, 4475 (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID << 4476 MPI_SAS_DEVICE_PGAD_FORM_SHIFT), 4477 (hot_plug_info->channel << 8) + hot_plug_info->id)) { 4478 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT 4479 "%s: fw_id=%d exit at line=%d\n", 4480 ioc->name, __func__, 4481 hot_plug_info->id, __LINE__)); 4482 break; 4483 } 4484 4485 /* If there is no FW B_T mapping for this device then break 4486 * */ 4487 if (!(sas_device.flags & MPI_SAS_DEVICE0_FLAGS_DEVICE_PRESENT) 4488 || !(sas_device.flags & 4489 MPI_SAS_DEVICE0_FLAGS_DEVICE_MAPPED)) 4490 break; 4491 4492 phy_info = mptsas_find_phyinfo_by_sas_address(ioc, 4493 sas_device.sas_address); 4494 if (!phy_info) { 4495 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT 4496 "%s: fw_id=%d exit at line=%d\n", ioc->name, 4497 __func__, hot_plug_info->id, __LINE__)); 4498 break; 4499 } 4500 4501 starget = mptsas_get_starget(phy_info); 4502 if (!starget) { 4503 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT 4504 "%s: fw_id=%d exit at line=%d\n", ioc->name, 4505 __func__, hot_plug_info->id, __LINE__)); 4506 break; 4507 } 4508 4509 vtarget = starget->hostdata; 4510 if (!vtarget) { 4511 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT 4512 "%s: fw_id=%d exit at line=%d\n", ioc->name, 4513 __func__, hot_plug_info->id, __LINE__)); 4514 break; 4515 } 4516 4517 if (!(vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT)) { 4518 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT 4519 "%s: fw_id=%d exit at line=%d\n", ioc->name, 4520 __func__, hot_plug_info->id, __LINE__)); 4521 break; 4522 } 4523 4524 mpt_findImVolumes(ioc); 4525 4526 starget_printk(KERN_INFO, starget, MYIOC_s_FMT "RAID Exposing:" 4527 " fw_channel=%d, fw_id=%d, physdsk %d, sas_addr 0x%llx\n", 4528 ioc->name, hot_plug_info->channel, hot_plug_info->id, 4529 hot_plug_info->phys_disk_num, (unsigned long long) 4530 sas_device.sas_address); 4531 4532 vtarget->tflags &= ~MPT_TARGET_FLAGS_RAID_COMPONENT; 4533 vtarget->id = hot_plug_info->id; 4534 phy_info->attached.phys_disk_num = ~0; 4535 mptsas_reprobe_target(starget, 0); 4536 mptsas_add_device_component_by_fw(ioc, 4537 hot_plug_info->channel, hot_plug_info->id); 4538 break; 4539 4540 case MPTSAS_ADD_RAID: 4541 4542 mpt_findImVolumes(ioc); 4543 printk(MYIOC_s_INFO_FMT "attaching raid volume, channel %d, " 4544 "id %d\n", ioc->name, MPTSAS_RAID_CHANNEL, 4545 hot_plug_info->id); 4546 scsi_add_device(ioc->sh, MPTSAS_RAID_CHANNEL, 4547 hot_plug_info->id, 0); 4548 break; 4549 4550 case MPTSAS_DEL_RAID: 4551 4552 mpt_findImVolumes(ioc); 4553 printk(MYIOC_s_INFO_FMT "removing raid volume, channel %d, " 4554 "id %d\n", ioc->name, MPTSAS_RAID_CHANNEL, 4555 hot_plug_info->id); 4556 scsi_remove_device(hot_plug_info->sdev); 4557 scsi_device_put(hot_plug_info->sdev); 4558 break; 4559 4560 case MPTSAS_ADD_INACTIVE_VOLUME: 4561 4562 mpt_findImVolumes(ioc); 4563 mptsas_adding_inactive_raid_components(ioc, 4564 hot_plug_info->channel, hot_plug_info->id); 4565 break; 4566 4567 default: 4568 break; 4569 } 4570 4571 mptsas_free_fw_event(ioc, fw_event); 4572 } 4573 4574 static void 4575 mptsas_send_sas_event(struct fw_event_work *fw_event) 4576 { 4577 MPT_ADAPTER *ioc; 4578 struct mptsas_hotplug_event hot_plug_info; 4579 EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data; 4580 u32 device_info; 4581 u64 sas_address; 4582 4583 ioc = fw_event->ioc; 4584 sas_event_data = (EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *) 4585 fw_event->event_data; 4586 device_info = le32_to_cpu(sas_event_data->DeviceInfo); 4587 4588 if ((device_info & 4589 (MPI_SAS_DEVICE_INFO_SSP_TARGET | 4590 MPI_SAS_DEVICE_INFO_STP_TARGET | 4591 MPI_SAS_DEVICE_INFO_SATA_DEVICE)) == 0) { 4592 mptsas_free_fw_event(ioc, fw_event); 4593 return; 4594 } 4595 4596 if (sas_event_data->ReasonCode == 4597 MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED) { 4598 mptbase_sas_persist_operation(ioc, 4599 MPI_SAS_OP_CLEAR_NOT_PRESENT); 4600 mptsas_free_fw_event(ioc, fw_event); 4601 return; 4602 } 4603 4604 switch (sas_event_data->ReasonCode) { 4605 case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING: 4606 case MPI_EVENT_SAS_DEV_STAT_RC_ADDED: 4607 memset(&hot_plug_info, 0, sizeof(struct mptsas_hotplug_event)); 4608 hot_plug_info.handle = le16_to_cpu(sas_event_data->DevHandle); 4609 hot_plug_info.channel = sas_event_data->Bus; 4610 hot_plug_info.id = sas_event_data->TargetID; 4611 hot_plug_info.phy_id = sas_event_data->PhyNum; 4612 memcpy(&sas_address, &sas_event_data->SASAddress, 4613 sizeof(u64)); 4614 hot_plug_info.sas_address = le64_to_cpu(sas_address); 4615 hot_plug_info.device_info = device_info; 4616 if (sas_event_data->ReasonCode & 4617 MPI_EVENT_SAS_DEV_STAT_RC_ADDED) 4618 hot_plug_info.event_type = MPTSAS_ADD_DEVICE; 4619 else 4620 hot_plug_info.event_type = MPTSAS_DEL_DEVICE; 4621 mptsas_hotplug_work(ioc, fw_event, &hot_plug_info); 4622 break; 4623 4624 case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED: 4625 mptbase_sas_persist_operation(ioc, 4626 MPI_SAS_OP_CLEAR_NOT_PRESENT); 4627 mptsas_free_fw_event(ioc, fw_event); 4628 break; 4629 4630 case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA: 4631 /* TODO */ 4632 case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET: 4633 /* TODO */ 4634 default: 4635 mptsas_free_fw_event(ioc, fw_event); 4636 break; 4637 } 4638 } 4639 4640 static void 4641 mptsas_send_raid_event(struct fw_event_work *fw_event) 4642 { 4643 MPT_ADAPTER *ioc; 4644 EVENT_DATA_RAID *raid_event_data; 4645 struct mptsas_hotplug_event hot_plug_info; 4646 int status; 4647 int state; 4648 struct scsi_device *sdev = NULL; 4649 VirtDevice *vdevice = NULL; 4650 RaidPhysDiskPage0_t phys_disk; 4651 4652 ioc = fw_event->ioc; 4653 raid_event_data = (EVENT_DATA_RAID *)fw_event->event_data; 4654 status = le32_to_cpu(raid_event_data->SettingsStatus); 4655 state = (status >> 8) & 0xff; 4656 4657 memset(&hot_plug_info, 0, sizeof(struct mptsas_hotplug_event)); 4658 hot_plug_info.id = raid_event_data->VolumeID; 4659 hot_plug_info.channel = raid_event_data->VolumeBus; 4660 hot_plug_info.phys_disk_num = raid_event_data->PhysDiskNum; 4661 4662 if (raid_event_data->ReasonCode == MPI_EVENT_RAID_RC_VOLUME_DELETED || 4663 raid_event_data->ReasonCode == MPI_EVENT_RAID_RC_VOLUME_CREATED || 4664 raid_event_data->ReasonCode == 4665 MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED) { 4666 sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL, 4667 hot_plug_info.id, 0); 4668 hot_plug_info.sdev = sdev; 4669 if (sdev) 4670 vdevice = sdev->hostdata; 4671 } 4672 4673 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Entering %s: " 4674 "ReasonCode=%02x\n", ioc->name, __func__, 4675 raid_event_data->ReasonCode)); 4676 4677 switch (raid_event_data->ReasonCode) { 4678 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED: 4679 hot_plug_info.event_type = MPTSAS_DEL_PHYSDISK_REPROBE; 4680 break; 4681 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED: 4682 hot_plug_info.event_type = MPTSAS_ADD_PHYSDISK_REPROBE; 4683 break; 4684 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED: 4685 switch (state) { 4686 case MPI_PD_STATE_ONLINE: 4687 case MPI_PD_STATE_NOT_COMPATIBLE: 4688 mpt_raid_phys_disk_pg0(ioc, 4689 raid_event_data->PhysDiskNum, &phys_disk); 4690 hot_plug_info.id = phys_disk.PhysDiskID; 4691 hot_plug_info.channel = phys_disk.PhysDiskBus; 4692 hot_plug_info.event_type = MPTSAS_ADD_PHYSDISK; 4693 break; 4694 case MPI_PD_STATE_FAILED: 4695 case MPI_PD_STATE_MISSING: 4696 case MPI_PD_STATE_OFFLINE_AT_HOST_REQUEST: 4697 case MPI_PD_STATE_FAILED_AT_HOST_REQUEST: 4698 case MPI_PD_STATE_OFFLINE_FOR_ANOTHER_REASON: 4699 hot_plug_info.event_type = MPTSAS_DEL_PHYSDISK; 4700 break; 4701 default: 4702 break; 4703 } 4704 break; 4705 case MPI_EVENT_RAID_RC_VOLUME_DELETED: 4706 if (!sdev) 4707 break; 4708 vdevice->vtarget->deleted = 1; /* block IO */ 4709 hot_plug_info.event_type = MPTSAS_DEL_RAID; 4710 break; 4711 case MPI_EVENT_RAID_RC_VOLUME_CREATED: 4712 if (sdev) { 4713 scsi_device_put(sdev); 4714 break; 4715 } 4716 hot_plug_info.event_type = MPTSAS_ADD_RAID; 4717 break; 4718 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED: 4719 if (!(status & MPI_RAIDVOL0_STATUS_FLAG_ENABLED)) { 4720 if (!sdev) 4721 break; 4722 vdevice->vtarget->deleted = 1; /* block IO */ 4723 hot_plug_info.event_type = MPTSAS_DEL_RAID; 4724 break; 4725 } 4726 switch (state) { 4727 case MPI_RAIDVOL0_STATUS_STATE_FAILED: 4728 case MPI_RAIDVOL0_STATUS_STATE_MISSING: 4729 if (!sdev) 4730 break; 4731 vdevice->vtarget->deleted = 1; /* block IO */ 4732 hot_plug_info.event_type = MPTSAS_DEL_RAID; 4733 break; 4734 case MPI_RAIDVOL0_STATUS_STATE_OPTIMAL: 4735 case MPI_RAIDVOL0_STATUS_STATE_DEGRADED: 4736 if (sdev) { 4737 scsi_device_put(sdev); 4738 break; 4739 } 4740 hot_plug_info.event_type = MPTSAS_ADD_RAID; 4741 break; 4742 default: 4743 break; 4744 } 4745 break; 4746 default: 4747 break; 4748 } 4749 4750 if (hot_plug_info.event_type != MPTSAS_IGNORE_EVENT) 4751 mptsas_hotplug_work(ioc, fw_event, &hot_plug_info); 4752 else 4753 mptsas_free_fw_event(ioc, fw_event); 4754 } 4755 4756 /** 4757 * mptsas_issue_tm - send mptsas internal tm request 4758 * @ioc: Pointer to MPT_ADAPTER structure 4759 * @type: Task Management type 4760 * @channel: channel number for task management 4761 * @id: Logical Target ID for reset (if appropriate) 4762 * @lun: Logical unit for reset (if appropriate) 4763 * @task_context: Context for the task to be aborted 4764 * @timeout: timeout for task management control 4765 * 4766 * return 0 on success and -1 on failure: 4767 * 4768 */ 4769 static int 4770 mptsas_issue_tm(MPT_ADAPTER *ioc, u8 type, u8 channel, u8 id, u64 lun, 4771 int task_context, ulong timeout, u8 *issue_reset) 4772 { 4773 MPT_FRAME_HDR *mf; 4774 SCSITaskMgmt_t *pScsiTm; 4775 int retval; 4776 unsigned long timeleft; 4777 4778 *issue_reset = 0; 4779 mf = mpt_get_msg_frame(mptsasDeviceResetCtx, ioc); 4780 if (mf == NULL) { 4781 retval = -1; /* return failure */ 4782 dtmprintk(ioc, printk(MYIOC_s_WARN_FMT "TaskMgmt request: no " 4783 "msg frames!!\n", ioc->name)); 4784 goto out; 4785 } 4786 4787 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request: mr = %p, " 4788 "task_type = 0x%02X,\n\t timeout = %ld, fw_channel = %d, " 4789 "fw_id = %d, lun = %lld,\n\t task_context = 0x%x\n", ioc->name, mf, 4790 type, timeout, channel, id, (unsigned long long)lun, 4791 task_context)); 4792 4793 pScsiTm = (SCSITaskMgmt_t *) mf; 4794 memset(pScsiTm, 0, sizeof(SCSITaskMgmt_t)); 4795 pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT; 4796 pScsiTm->TaskType = type; 4797 pScsiTm->MsgFlags = 0; 4798 pScsiTm->TargetID = id; 4799 pScsiTm->Bus = channel; 4800 pScsiTm->ChainOffset = 0; 4801 pScsiTm->Reserved = 0; 4802 pScsiTm->Reserved1 = 0; 4803 pScsiTm->TaskMsgContext = task_context; 4804 int_to_scsilun(lun, (struct scsi_lun *)pScsiTm->LUN); 4805 4806 INITIALIZE_MGMT_STATUS(ioc->taskmgmt_cmds.status) 4807 CLEAR_MGMT_STATUS(ioc->internal_cmds.status) 4808 retval = 0; 4809 mpt_put_msg_frame_hi_pri(mptsasDeviceResetCtx, ioc, mf); 4810 4811 /* Now wait for the command to complete */ 4812 timeleft = wait_for_completion_timeout(&ioc->taskmgmt_cmds.done, 4813 timeout*HZ); 4814 if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { 4815 retval = -1; /* return failure */ 4816 dtmprintk(ioc, printk(MYIOC_s_ERR_FMT 4817 "TaskMgmt request: TIMED OUT!(mr=%p)\n", ioc->name, mf)); 4818 mpt_free_msg_frame(ioc, mf); 4819 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) 4820 goto out; 4821 *issue_reset = 1; 4822 goto out; 4823 } 4824 4825 if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_RF_VALID)) { 4826 retval = -1; /* return failure */ 4827 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 4828 "TaskMgmt request: failed with no reply\n", ioc->name)); 4829 goto out; 4830 } 4831 4832 out: 4833 CLEAR_MGMT_STATUS(ioc->taskmgmt_cmds.status) 4834 return retval; 4835 } 4836 4837 /** 4838 * mptsas_broadcast_primative_work - Handle broadcast primitives 4839 * @work: work queue payload containing info describing the event 4840 * 4841 * this will be handled in workqueue context. 4842 */ 4843 static void 4844 mptsas_broadcast_primative_work(struct fw_event_work *fw_event) 4845 { 4846 MPT_ADAPTER *ioc = fw_event->ioc; 4847 MPT_FRAME_HDR *mf; 4848 VirtDevice *vdevice; 4849 int ii; 4850 struct scsi_cmnd *sc; 4851 SCSITaskMgmtReply_t *pScsiTmReply; 4852 u8 issue_reset; 4853 int task_context; 4854 u8 channel, id; 4855 int lun; 4856 u32 termination_count; 4857 u32 query_count; 4858 4859 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 4860 "%s - enter\n", ioc->name, __func__)); 4861 4862 mutex_lock(&ioc->taskmgmt_cmds.mutex); 4863 if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) { 4864 mutex_unlock(&ioc->taskmgmt_cmds.mutex); 4865 mptsas_requeue_fw_event(ioc, fw_event, 1000); 4866 return; 4867 } 4868 4869 issue_reset = 0; 4870 termination_count = 0; 4871 query_count = 0; 4872 mpt_findImVolumes(ioc); 4873 pScsiTmReply = (SCSITaskMgmtReply_t *) ioc->taskmgmt_cmds.reply; 4874 4875 for (ii = 0; ii < ioc->req_depth; ii++) { 4876 if (ioc->fw_events_off) 4877 goto out; 4878 sc = mptscsih_get_scsi_lookup(ioc, ii); 4879 if (!sc) 4880 continue; 4881 mf = MPT_INDEX_2_MFPTR(ioc, ii); 4882 if (!mf) 4883 continue; 4884 task_context = mf->u.frame.hwhdr.msgctxu.MsgContext; 4885 vdevice = sc->device->hostdata; 4886 if (!vdevice || !vdevice->vtarget) 4887 continue; 4888 if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) 4889 continue; /* skip hidden raid components */ 4890 if (vdevice->vtarget->raidVolume) 4891 continue; /* skip hidden raid components */ 4892 channel = vdevice->vtarget->channel; 4893 id = vdevice->vtarget->id; 4894 lun = vdevice->lun; 4895 if (mptsas_issue_tm(ioc, MPI_SCSITASKMGMT_TASKTYPE_QUERY_TASK, 4896 channel, id, (u64)lun, task_context, 30, &issue_reset)) 4897 goto out; 4898 query_count++; 4899 termination_count += 4900 le32_to_cpu(pScsiTmReply->TerminationCount); 4901 if ((pScsiTmReply->IOCStatus == MPI_IOCSTATUS_SUCCESS) && 4902 (pScsiTmReply->ResponseCode == 4903 MPI_SCSITASKMGMT_RSP_TM_SUCCEEDED || 4904 pScsiTmReply->ResponseCode == 4905 MPI_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC)) 4906 continue; 4907 if (mptsas_issue_tm(ioc, 4908 MPI_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET, 4909 channel, id, (u64)lun, 0, 30, &issue_reset)) 4910 goto out; 4911 termination_count += 4912 le32_to_cpu(pScsiTmReply->TerminationCount); 4913 } 4914 4915 out: 4916 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 4917 "%s - exit, query_count = %d termination_count = %d\n", 4918 ioc->name, __func__, query_count, termination_count)); 4919 4920 ioc->broadcast_aen_busy = 0; 4921 mpt_clear_taskmgmt_in_progress_flag(ioc); 4922 mutex_unlock(&ioc->taskmgmt_cmds.mutex); 4923 4924 if (issue_reset) { 4925 printk(MYIOC_s_WARN_FMT 4926 "Issuing Reset from %s!! doorbell=0x%08x\n", 4927 ioc->name, __func__, mpt_GetIocState(ioc, 0)); 4928 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); 4929 } 4930 mptsas_free_fw_event(ioc, fw_event); 4931 } 4932 4933 /* 4934 * mptsas_send_ir2_event - handle exposing hidden disk when 4935 * an inactive raid volume is added 4936 * 4937 * @ioc: Pointer to MPT_ADAPTER structure 4938 * @ir2_data 4939 * 4940 */ 4941 static void 4942 mptsas_send_ir2_event(struct fw_event_work *fw_event) 4943 { 4944 MPT_ADAPTER *ioc; 4945 struct mptsas_hotplug_event hot_plug_info; 4946 MPI_EVENT_DATA_IR2 *ir2_data; 4947 u8 reasonCode; 4948 RaidPhysDiskPage0_t phys_disk; 4949 4950 ioc = fw_event->ioc; 4951 ir2_data = (MPI_EVENT_DATA_IR2 *)fw_event->event_data; 4952 reasonCode = ir2_data->ReasonCode; 4953 4954 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Entering %s: " 4955 "ReasonCode=%02x\n", ioc->name, __func__, reasonCode)); 4956 4957 memset(&hot_plug_info, 0, sizeof(struct mptsas_hotplug_event)); 4958 hot_plug_info.id = ir2_data->TargetID; 4959 hot_plug_info.channel = ir2_data->Bus; 4960 switch (reasonCode) { 4961 case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED: 4962 hot_plug_info.event_type = MPTSAS_ADD_INACTIVE_VOLUME; 4963 break; 4964 case MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED: 4965 hot_plug_info.phys_disk_num = ir2_data->PhysDiskNum; 4966 hot_plug_info.event_type = MPTSAS_DEL_PHYSDISK; 4967 break; 4968 case MPI_EVENT_IR2_RC_DUAL_PORT_ADDED: 4969 hot_plug_info.phys_disk_num = ir2_data->PhysDiskNum; 4970 mpt_raid_phys_disk_pg0(ioc, 4971 ir2_data->PhysDiskNum, &phys_disk); 4972 hot_plug_info.id = phys_disk.PhysDiskID; 4973 hot_plug_info.event_type = MPTSAS_ADD_PHYSDISK; 4974 break; 4975 default: 4976 mptsas_free_fw_event(ioc, fw_event); 4977 return; 4978 } 4979 mptsas_hotplug_work(ioc, fw_event, &hot_plug_info); 4980 } 4981 4982 static int 4983 mptsas_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *reply) 4984 { 4985 u32 event = le32_to_cpu(reply->Event); 4986 int sz, event_data_sz; 4987 struct fw_event_work *fw_event; 4988 unsigned long delay; 4989 4990 if (ioc->bus_type != SAS) 4991 return 0; 4992 4993 /* events turned off due to host reset or driver unloading */ 4994 if (ioc->fw_events_off) 4995 return 0; 4996 4997 delay = msecs_to_jiffies(1); 4998 switch (event) { 4999 case MPI_EVENT_SAS_BROADCAST_PRIMITIVE: 5000 { 5001 EVENT_DATA_SAS_BROADCAST_PRIMITIVE *broadcast_event_data = 5002 (EVENT_DATA_SAS_BROADCAST_PRIMITIVE *)reply->Data; 5003 if (broadcast_event_data->Primitive != 5004 MPI_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT) 5005 return 0; 5006 if (ioc->broadcast_aen_busy) 5007 return 0; 5008 ioc->broadcast_aen_busy = 1; 5009 break; 5010 } 5011 case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE: 5012 { 5013 EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data = 5014 (EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *)reply->Data; 5015 u16 ioc_stat; 5016 ioc_stat = le16_to_cpu(reply->IOCStatus); 5017 5018 if (sas_event_data->ReasonCode == 5019 MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING) { 5020 mptsas_target_reset_queue(ioc, sas_event_data); 5021 return 0; 5022 } 5023 if (sas_event_data->ReasonCode == 5024 MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET && 5025 ioc->device_missing_delay && 5026 (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE)) { 5027 VirtTarget *vtarget = NULL; 5028 u8 id, channel; 5029 5030 id = sas_event_data->TargetID; 5031 channel = sas_event_data->Bus; 5032 5033 vtarget = mptsas_find_vtarget(ioc, channel, id); 5034 if (vtarget) { 5035 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT 5036 "LogInfo (0x%x) available for " 5037 "INTERNAL_DEVICE_RESET" 5038 "fw_id %d fw_channel %d\n", ioc->name, 5039 le32_to_cpu(reply->IOCLogInfo), 5040 id, channel)); 5041 if (vtarget->raidVolume) { 5042 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT 5043 "Skipping Raid Volume for inDMD\n", 5044 ioc->name)); 5045 } else { 5046 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT 5047 "Setting device flag inDMD\n", 5048 ioc->name)); 5049 vtarget->inDMD = 1; 5050 } 5051 5052 } 5053 5054 } 5055 5056 break; 5057 } 5058 case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE: 5059 { 5060 MpiEventDataSasExpanderStatusChange_t *expander_data = 5061 (MpiEventDataSasExpanderStatusChange_t *)reply->Data; 5062 5063 if (ioc->old_sas_discovery_protocal) 5064 return 0; 5065 5066 if (expander_data->ReasonCode == 5067 MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING && 5068 ioc->device_missing_delay) 5069 delay = HZ * ioc->device_missing_delay; 5070 break; 5071 } 5072 case MPI_EVENT_SAS_DISCOVERY: 5073 { 5074 u32 discovery_status; 5075 EventDataSasDiscovery_t *discovery_data = 5076 (EventDataSasDiscovery_t *)reply->Data; 5077 5078 discovery_status = le32_to_cpu(discovery_data->DiscoveryStatus); 5079 ioc->sas_discovery_quiesce_io = discovery_status ? 1 : 0; 5080 if (ioc->old_sas_discovery_protocal && !discovery_status) 5081 mptsas_queue_rescan(ioc); 5082 return 0; 5083 } 5084 case MPI_EVENT_INTEGRATED_RAID: 5085 case MPI_EVENT_PERSISTENT_TABLE_FULL: 5086 case MPI_EVENT_IR2: 5087 case MPI_EVENT_SAS_PHY_LINK_STATUS: 5088 case MPI_EVENT_QUEUE_FULL: 5089 break; 5090 default: 5091 return 0; 5092 } 5093 5094 event_data_sz = ((reply->MsgLength * 4) - 5095 offsetof(EventNotificationReply_t, Data)); 5096 sz = offsetof(struct fw_event_work, event_data) + event_data_sz; 5097 fw_event = kzalloc(sz, GFP_ATOMIC); 5098 if (!fw_event) { 5099 printk(MYIOC_s_WARN_FMT "%s: failed at (line=%d)\n", ioc->name, 5100 __func__, __LINE__); 5101 return 0; 5102 } 5103 memcpy(fw_event->event_data, reply->Data, event_data_sz); 5104 fw_event->event = event; 5105 fw_event->ioc = ioc; 5106 mptsas_add_fw_event(ioc, fw_event, delay); 5107 return 0; 5108 } 5109 5110 /* Delete a volume when no longer listed in ioc pg2 5111 */ 5112 static void mptsas_volume_delete(MPT_ADAPTER *ioc, u8 id) 5113 { 5114 struct scsi_device *sdev; 5115 int i; 5116 5117 sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL, id, 0); 5118 if (!sdev) 5119 return; 5120 if (!ioc->raid_data.pIocPg2) 5121 goto out; 5122 if (!ioc->raid_data.pIocPg2->NumActiveVolumes) 5123 goto out; 5124 for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) 5125 if (ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID == id) 5126 goto release_sdev; 5127 out: 5128 printk(MYIOC_s_INFO_FMT "removing raid volume, channel %d, " 5129 "id %d\n", ioc->name, MPTSAS_RAID_CHANNEL, id); 5130 scsi_remove_device(sdev); 5131 release_sdev: 5132 scsi_device_put(sdev); 5133 } 5134 5135 static int 5136 mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id) 5137 { 5138 struct Scsi_Host *sh; 5139 MPT_SCSI_HOST *hd; 5140 MPT_ADAPTER *ioc; 5141 unsigned long flags; 5142 int ii; 5143 int numSGE = 0; 5144 int scale; 5145 int ioc_cap; 5146 int error=0; 5147 int r; 5148 5149 r = mpt_attach(pdev,id); 5150 if (r) 5151 return r; 5152 5153 ioc = pci_get_drvdata(pdev); 5154 mptsas_fw_event_off(ioc); 5155 ioc->DoneCtx = mptsasDoneCtx; 5156 ioc->TaskCtx = mptsasTaskCtx; 5157 ioc->InternalCtx = mptsasInternalCtx; 5158 ioc->schedule_target_reset = &mptsas_schedule_target_reset; 5159 ioc->schedule_dead_ioc_flush_running_cmds = 5160 &mptscsih_flush_running_cmds; 5161 /* Added sanity check on readiness of the MPT adapter. 5162 */ 5163 if (ioc->last_state != MPI_IOC_STATE_OPERATIONAL) { 5164 printk(MYIOC_s_WARN_FMT 5165 "Skipping because it's not operational!\n", 5166 ioc->name); 5167 error = -ENODEV; 5168 goto out_mptsas_probe; 5169 } 5170 5171 if (!ioc->active) { 5172 printk(MYIOC_s_WARN_FMT "Skipping because it's disabled!\n", 5173 ioc->name); 5174 error = -ENODEV; 5175 goto out_mptsas_probe; 5176 } 5177 5178 /* Sanity check - ensure at least 1 port is INITIATOR capable 5179 */ 5180 ioc_cap = 0; 5181 for (ii = 0; ii < ioc->facts.NumberOfPorts; ii++) { 5182 if (ioc->pfacts[ii].ProtocolFlags & 5183 MPI_PORTFACTS_PROTOCOL_INITIATOR) 5184 ioc_cap++; 5185 } 5186 5187 if (!ioc_cap) { 5188 printk(MYIOC_s_WARN_FMT 5189 "Skipping ioc=%p because SCSI Initiator mode " 5190 "is NOT enabled!\n", ioc->name, ioc); 5191 return 0; 5192 } 5193 5194 sh = scsi_host_alloc(&mptsas_driver_template, sizeof(MPT_SCSI_HOST)); 5195 if (!sh) { 5196 printk(MYIOC_s_WARN_FMT 5197 "Unable to register controller with SCSI subsystem\n", 5198 ioc->name); 5199 error = -1; 5200 goto out_mptsas_probe; 5201 } 5202 5203 spin_lock_irqsave(&ioc->FreeQlock, flags); 5204 5205 /* Attach the SCSI Host to the IOC structure 5206 */ 5207 ioc->sh = sh; 5208 5209 sh->io_port = 0; 5210 sh->n_io_port = 0; 5211 sh->irq = 0; 5212 5213 /* set 16 byte cdb's */ 5214 sh->max_cmd_len = 16; 5215 sh->can_queue = min_t(int, ioc->req_depth - 10, sh->can_queue); 5216 sh->max_id = -1; 5217 sh->max_lun = max_lun; 5218 sh->transportt = mptsas_transport_template; 5219 5220 /* Required entry. 5221 */ 5222 sh->unique_id = ioc->id; 5223 5224 INIT_LIST_HEAD(&ioc->sas_topology); 5225 mutex_init(&ioc->sas_topology_mutex); 5226 mutex_init(&ioc->sas_discovery_mutex); 5227 mutex_init(&ioc->sas_mgmt.mutex); 5228 init_completion(&ioc->sas_mgmt.done); 5229 5230 /* Verify that we won't exceed the maximum 5231 * number of chain buffers 5232 * We can optimize: ZZ = req_sz/sizeof(SGE) 5233 * For 32bit SGE's: 5234 * numSGE = 1 + (ZZ-1)*(maxChain -1) + ZZ 5235 * + (req_sz - 64)/sizeof(SGE) 5236 * A slightly different algorithm is required for 5237 * 64bit SGEs. 5238 */ 5239 scale = ioc->req_sz/ioc->SGE_size; 5240 if (ioc->sg_addr_size == sizeof(u64)) { 5241 numSGE = (scale - 1) * 5242 (ioc->facts.MaxChainDepth-1) + scale + 5243 (ioc->req_sz - 60) / ioc->SGE_size; 5244 } else { 5245 numSGE = 1 + (scale - 1) * 5246 (ioc->facts.MaxChainDepth-1) + scale + 5247 (ioc->req_sz - 64) / ioc->SGE_size; 5248 } 5249 5250 if (numSGE < sh->sg_tablesize) { 5251 /* Reset this value */ 5252 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT 5253 "Resetting sg_tablesize to %d from %d\n", 5254 ioc->name, numSGE, sh->sg_tablesize)); 5255 sh->sg_tablesize = numSGE; 5256 } 5257 5258 if (mpt_loadtime_max_sectors) { 5259 if (mpt_loadtime_max_sectors < 64 || 5260 mpt_loadtime_max_sectors > 8192) { 5261 printk(MYIOC_s_INFO_FMT "Invalid value passed for" 5262 "mpt_loadtime_max_sectors %d." 5263 "Range from 64 to 8192\n", ioc->name, 5264 mpt_loadtime_max_sectors); 5265 } 5266 mpt_loadtime_max_sectors &= 0xFFFFFFFE; 5267 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT 5268 "Resetting max sector to %d from %d\n", 5269 ioc->name, mpt_loadtime_max_sectors, sh->max_sectors)); 5270 sh->max_sectors = mpt_loadtime_max_sectors; 5271 } 5272 5273 hd = shost_priv(sh); 5274 hd->ioc = ioc; 5275 5276 /* SCSI needs scsi_cmnd lookup table! 5277 * (with size equal to req_depth*PtrSz!) 5278 */ 5279 ioc->ScsiLookup = kcalloc(ioc->req_depth, sizeof(void *), GFP_ATOMIC); 5280 if (!ioc->ScsiLookup) { 5281 error = -ENOMEM; 5282 spin_unlock_irqrestore(&ioc->FreeQlock, flags); 5283 goto out_mptsas_probe; 5284 } 5285 spin_lock_init(&ioc->scsi_lookup_lock); 5286 5287 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ScsiLookup @ %p\n", 5288 ioc->name, ioc->ScsiLookup)); 5289 5290 ioc->sas_data.ptClear = mpt_pt_clear; 5291 5292 hd->last_queue_full = 0; 5293 INIT_LIST_HEAD(&hd->target_reset_list); 5294 INIT_LIST_HEAD(&ioc->sas_device_info_list); 5295 mutex_init(&ioc->sas_device_info_mutex); 5296 5297 spin_unlock_irqrestore(&ioc->FreeQlock, flags); 5298 5299 if (ioc->sas_data.ptClear==1) { 5300 mptbase_sas_persist_operation( 5301 ioc, MPI_SAS_OP_CLEAR_ALL_PERSISTENT); 5302 } 5303 5304 error = scsi_add_host(sh, &ioc->pcidev->dev); 5305 if (error) { 5306 dprintk(ioc, printk(MYIOC_s_ERR_FMT 5307 "scsi_add_host failed\n", ioc->name)); 5308 goto out_mptsas_probe; 5309 } 5310 5311 /* older firmware doesn't support expander events */ 5312 if ((ioc->facts.HeaderVersion >> 8) < 0xE) 5313 ioc->old_sas_discovery_protocal = 1; 5314 mptsas_scan_sas_topology(ioc); 5315 mptsas_fw_event_on(ioc); 5316 return 0; 5317 5318 out_mptsas_probe: 5319 5320 mptscsih_remove(pdev); 5321 return error; 5322 } 5323 5324 void 5325 mptsas_shutdown(struct pci_dev *pdev) 5326 { 5327 MPT_ADAPTER *ioc = pci_get_drvdata(pdev); 5328 5329 mptsas_fw_event_off(ioc); 5330 mptsas_cleanup_fw_event_q(ioc); 5331 } 5332 5333 static void mptsas_remove(struct pci_dev *pdev) 5334 { 5335 MPT_ADAPTER *ioc = pci_get_drvdata(pdev); 5336 struct mptsas_portinfo *p, *n; 5337 int i; 5338 5339 if (!ioc->sh) { 5340 printk(MYIOC_s_INFO_FMT "IOC is in Target mode\n", ioc->name); 5341 mpt_detach(pdev); 5342 return; 5343 } 5344 5345 mptsas_shutdown(pdev); 5346 5347 mptsas_del_device_components(ioc); 5348 5349 ioc->sas_discovery_ignore_events = 1; 5350 sas_remove_host(ioc->sh); 5351 5352 mutex_lock(&ioc->sas_topology_mutex); 5353 list_for_each_entry_safe(p, n, &ioc->sas_topology, list) { 5354 list_del(&p->list); 5355 for (i = 0 ; i < p->num_phys ; i++) 5356 mptsas_port_delete(ioc, p->phy_info[i].port_details); 5357 5358 kfree(p->phy_info); 5359 kfree(p); 5360 } 5361 mutex_unlock(&ioc->sas_topology_mutex); 5362 ioc->hba_port_info = NULL; 5363 mptscsih_remove(pdev); 5364 } 5365 5366 static struct pci_device_id mptsas_pci_table[] = { 5367 { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1064, 5368 PCI_ANY_ID, PCI_ANY_ID }, 5369 { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1068, 5370 PCI_ANY_ID, PCI_ANY_ID }, 5371 { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1064E, 5372 PCI_ANY_ID, PCI_ANY_ID }, 5373 { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1068E, 5374 PCI_ANY_ID, PCI_ANY_ID }, 5375 { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1078, 5376 PCI_ANY_ID, PCI_ANY_ID }, 5377 { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1068_820XELP, 5378 PCI_ANY_ID, PCI_ANY_ID }, 5379 {0} /* Terminating entry */ 5380 }; 5381 MODULE_DEVICE_TABLE(pci, mptsas_pci_table); 5382 5383 5384 static struct pci_driver mptsas_driver = { 5385 .name = "mptsas", 5386 .id_table = mptsas_pci_table, 5387 .probe = mptsas_probe, 5388 .remove = mptsas_remove, 5389 .shutdown = mptsas_shutdown, 5390 #ifdef CONFIG_PM 5391 .suspend = mptscsih_suspend, 5392 .resume = mptscsih_resume, 5393 #endif 5394 }; 5395 5396 static int __init 5397 mptsas_init(void) 5398 { 5399 int error; 5400 5401 show_mptmod_ver(my_NAME, my_VERSION); 5402 5403 mptsas_transport_template = 5404 sas_attach_transport(&mptsas_transport_functions); 5405 if (!mptsas_transport_template) 5406 return -ENODEV; 5407 mptsas_transport_template->eh_timed_out = mptsas_eh_timed_out; 5408 5409 mptsasDoneCtx = mpt_register(mptscsih_io_done, MPTSAS_DRIVER, 5410 "mptscsih_io_done"); 5411 mptsasTaskCtx = mpt_register(mptscsih_taskmgmt_complete, MPTSAS_DRIVER, 5412 "mptscsih_taskmgmt_complete"); 5413 mptsasInternalCtx = 5414 mpt_register(mptscsih_scandv_complete, MPTSAS_DRIVER, 5415 "mptscsih_scandv_complete"); 5416 mptsasMgmtCtx = mpt_register(mptsas_mgmt_done, MPTSAS_DRIVER, 5417 "mptsas_mgmt_done"); 5418 mptsasDeviceResetCtx = 5419 mpt_register(mptsas_taskmgmt_complete, MPTSAS_DRIVER, 5420 "mptsas_taskmgmt_complete"); 5421 5422 mpt_event_register(mptsasDoneCtx, mptsas_event_process); 5423 mpt_reset_register(mptsasDoneCtx, mptsas_ioc_reset); 5424 5425 error = pci_register_driver(&mptsas_driver); 5426 if (error) 5427 sas_release_transport(mptsas_transport_template); 5428 5429 return error; 5430 } 5431 5432 static void __exit 5433 mptsas_exit(void) 5434 { 5435 pci_unregister_driver(&mptsas_driver); 5436 sas_release_transport(mptsas_transport_template); 5437 5438 mpt_reset_deregister(mptsasDoneCtx); 5439 mpt_event_deregister(mptsasDoneCtx); 5440 5441 mpt_deregister(mptsasMgmtCtx); 5442 mpt_deregister(mptsasInternalCtx); 5443 mpt_deregister(mptsasTaskCtx); 5444 mpt_deregister(mptsasDoneCtx); 5445 mpt_deregister(mptsasDeviceResetCtx); 5446 } 5447 5448 module_init(mptsas_init); 5449 module_exit(mptsas_exit); 5450