1 /* 2 * linux/drivers/message/fusion/mptctl.c 3 * mpt Ioctl driver. 4 * For use with LSI PCI chip/adapters 5 * running LSI Fusion MPT (Message Passing Technology) firmware. 6 * 7 * Copyright (c) 1999-2008 LSI Corporation 8 * (mailto:DL-MPTFusionLinux@lsi.com) 9 * 10 */ 11 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 12 /* 13 This program is free software; you can redistribute it and/or modify 14 it under the terms of the GNU General Public License as published by 15 the Free Software Foundation; version 2 of the License. 16 17 This program is distributed in the hope that it will be useful, 18 but WITHOUT ANY WARRANTY; without even the implied warranty of 19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 20 GNU General Public License for more details. 21 22 NO WARRANTY 23 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR 24 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT 25 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, 26 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is 27 solely responsible for determining the appropriateness of using and 28 distributing the Program and assumes all risks associated with its 29 exercise of rights under this Agreement, including but not limited to 30 the risks and costs of program errors, damage to or loss of data, 31 programs or equipment, and unavailability or interruption of operations. 32 33 DISCLAIMER OF LIABILITY 34 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY 35 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND 37 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR 38 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE 39 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED 40 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES 41 42 You should have received a copy of the GNU General Public License 43 along with this program; if not, write to the Free Software 44 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 45 */ 46 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 47 48 #include <linux/kernel.h> 49 #include <linux/module.h> 50 #include <linux/errno.h> 51 #include <linux/init.h> 52 #include <linux/slab.h> 53 #include <linux/types.h> 54 #include <linux/pci.h> 55 #include <linux/delay.h> /* for mdelay */ 56 #include <linux/miscdevice.h> 57 #include <linux/mutex.h> 58 #include <linux/compat.h> 59 60 #include <asm/io.h> 61 #include <linux/uaccess.h> 62 63 #include <scsi/scsi.h> 64 #include <scsi/scsi_cmnd.h> 65 #include <scsi/scsi_device.h> 66 #include <scsi/scsi_host.h> 67 #include <scsi/scsi_tcq.h> 68 69 #define COPYRIGHT "Copyright (c) 1999-2008 LSI Corporation" 70 #define MODULEAUTHOR "LSI Corporation" 71 #include "mptbase.h" 72 #include "mptctl.h" 73 74 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 75 #define my_NAME "Fusion MPT misc device (ioctl) driver" 76 #define my_VERSION MPT_LINUX_VERSION_COMMON 77 #define MYNAM "mptctl" 78 79 MODULE_AUTHOR(MODULEAUTHOR); 80 MODULE_DESCRIPTION(my_NAME); 81 MODULE_LICENSE("GPL"); 82 MODULE_VERSION(my_VERSION); 83 84 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 85 86 static DEFINE_MUTEX(mpctl_mutex); 87 static u8 mptctl_id = MPT_MAX_PROTOCOL_DRIVERS; 88 static u8 mptctl_taskmgmt_id = MPT_MAX_PROTOCOL_DRIVERS; 89 90 static DECLARE_WAIT_QUEUE_HEAD ( mptctl_wait ); 91 92 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 93 94 struct buflist { 95 u8 *kptr; 96 int len; 97 }; 98 99 /* 100 * Function prototypes. Called from OS entry point mptctl_ioctl. 101 * arg contents specific to function. 102 */ 103 static int mptctl_fw_download(unsigned long arg); 104 static int mptctl_getiocinfo(unsigned long arg, unsigned int cmd); 105 static int mptctl_gettargetinfo(unsigned long arg); 106 static int mptctl_readtest(unsigned long arg); 107 static int mptctl_mpt_command(unsigned long arg); 108 static int mptctl_eventquery(unsigned long arg); 109 static int mptctl_eventenable(unsigned long arg); 110 static int mptctl_eventreport(unsigned long arg); 111 static int mptctl_replace_fw(unsigned long arg); 112 113 static int mptctl_do_reset(unsigned long arg); 114 static int mptctl_hp_hostinfo(unsigned long arg, unsigned int cmd); 115 static int mptctl_hp_targetinfo(unsigned long arg); 116 117 static int mptctl_probe(struct pci_dev *, const struct pci_device_id *); 118 static void mptctl_remove(struct pci_dev *); 119 120 #ifdef CONFIG_COMPAT 121 static long compat_mpctl_ioctl(struct file *f, unsigned cmd, unsigned long arg); 122 #endif 123 /* 124 * Private function calls. 125 */ 126 static int mptctl_do_mpt_command(struct mpt_ioctl_command karg, void __user *mfPtr); 127 static int mptctl_do_fw_download(int ioc, char __user *ufwbuf, size_t fwlen); 128 static MptSge_t *kbuf_alloc_2_sgl(int bytes, u32 dir, int sge_offset, int *frags, 129 struct buflist **blp, dma_addr_t *sglbuf_dma, MPT_ADAPTER *ioc); 130 static void kfree_sgl(MptSge_t *sgl, dma_addr_t sgl_dma, 131 struct buflist *buflist, MPT_ADAPTER *ioc); 132 133 /* 134 * Reset Handler cleanup function 135 */ 136 static int mptctl_ioc_reset(MPT_ADAPTER *ioc, int reset_phase); 137 138 /* 139 * Event Handler function 140 */ 141 static int mptctl_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply); 142 static struct fasync_struct *async_queue=NULL; 143 144 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 145 /* 146 * Scatter gather list (SGL) sizes and limits... 147 */ 148 //#define MAX_SCSI_FRAGS 9 149 #define MAX_FRAGS_SPILL1 9 150 #define MAX_FRAGS_SPILL2 15 151 #define FRAGS_PER_BUCKET (MAX_FRAGS_SPILL2 + 1) 152 153 //#define MAX_CHAIN_FRAGS 64 154 //#define MAX_CHAIN_FRAGS (15+15+15+16) 155 #define MAX_CHAIN_FRAGS (4 * MAX_FRAGS_SPILL2 + 1) 156 157 // Define max sg LIST bytes ( == (#frags + #chains) * 8 bytes each) 158 // Works out to: 592d bytes! (9+1)*8 + 4*(15+1)*8 159 // ^----------------- 80 + 512 160 #define MAX_SGL_BYTES ((MAX_FRAGS_SPILL1 + 1 + (4 * FRAGS_PER_BUCKET)) * 8) 161 162 /* linux only seems to ever give 128kB MAX contiguous (GFP_USER) mem bytes */ 163 #define MAX_KMALLOC_SZ (128*1024) 164 165 #define MPT_IOCTL_DEFAULT_TIMEOUT 10 /* Default timeout value (seconds) */ 166 167 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 168 /** 169 * mptctl_syscall_down - Down the MPT adapter syscall semaphore. 170 * @ioc: Pointer to MPT adapter 171 * @nonblock: boolean, non-zero if O_NONBLOCK is set 172 * 173 * All of the ioctl commands can potentially sleep, which is illegal 174 * with a spinlock held, thus we perform mutual exclusion here. 175 * 176 * Returns negative errno on error, or zero for success. 177 */ 178 static inline int 179 mptctl_syscall_down(MPT_ADAPTER *ioc, int nonblock) 180 { 181 int rc = 0; 182 183 if (nonblock) { 184 if (!mutex_trylock(&ioc->ioctl_cmds.mutex)) 185 rc = -EAGAIN; 186 } else { 187 if (mutex_lock_interruptible(&ioc->ioctl_cmds.mutex)) 188 rc = -ERESTARTSYS; 189 } 190 return rc; 191 } 192 193 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 194 /* 195 * This is the callback for any message we have posted. The message itself 196 * will be returned to the message pool when we return from the IRQ 197 * 198 * This runs in irq context so be short and sweet. 199 */ 200 static int 201 mptctl_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply) 202 { 203 char *sense_data; 204 int req_index; 205 int sz; 206 207 if (!req) 208 return 0; 209 210 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "completing mpi function " 211 "(0x%02X), req=%p, reply=%p\n", ioc->name, req->u.hdr.Function, 212 req, reply)); 213 214 /* 215 * Handling continuation of the same reply. Processing the first 216 * reply, and eating the other replys that come later. 217 */ 218 if (ioc->ioctl_cmds.msg_context != req->u.hdr.MsgContext) 219 goto out_continuation; 220 221 ioc->ioctl_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD; 222 223 if (!reply) 224 goto out; 225 226 ioc->ioctl_cmds.status |= MPT_MGMT_STATUS_RF_VALID; 227 sz = min(ioc->reply_sz, 4*reply->u.reply.MsgLength); 228 memcpy(ioc->ioctl_cmds.reply, reply, sz); 229 230 if (reply->u.reply.IOCStatus || reply->u.reply.IOCLogInfo) 231 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 232 "iocstatus (0x%04X), loginfo (0x%08X)\n", ioc->name, 233 le16_to_cpu(reply->u.reply.IOCStatus), 234 le32_to_cpu(reply->u.reply.IOCLogInfo))); 235 236 if ((req->u.hdr.Function == MPI_FUNCTION_SCSI_IO_REQUEST) || 237 (req->u.hdr.Function == 238 MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) { 239 240 if (reply->u.sreply.SCSIStatus || reply->u.sreply.SCSIState) 241 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 242 "scsi_status (0x%02x), scsi_state (0x%02x), " 243 "tag = (0x%04x), transfer_count (0x%08x)\n", ioc->name, 244 reply->u.sreply.SCSIStatus, 245 reply->u.sreply.SCSIState, 246 le16_to_cpu(reply->u.sreply.TaskTag), 247 le32_to_cpu(reply->u.sreply.TransferCount))); 248 249 if (reply->u.sreply.SCSIState & 250 MPI_SCSI_STATE_AUTOSENSE_VALID) { 251 sz = req->u.scsireq.SenseBufferLength; 252 req_index = 253 le16_to_cpu(req->u.frame.hwhdr.msgctxu.fld.req_idx); 254 sense_data = ((u8 *)ioc->sense_buf_pool + 255 (req_index * MPT_SENSE_BUFFER_ALLOC)); 256 memcpy(ioc->ioctl_cmds.sense, sense_data, sz); 257 ioc->ioctl_cmds.status |= MPT_MGMT_STATUS_SENSE_VALID; 258 } 259 } 260 261 out: 262 /* We are done, issue wake up 263 */ 264 if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_PENDING) { 265 if (req->u.hdr.Function == MPI_FUNCTION_SCSI_TASK_MGMT) { 266 mpt_clear_taskmgmt_in_progress_flag(ioc); 267 ioc->ioctl_cmds.status &= ~MPT_MGMT_STATUS_PENDING; 268 complete(&ioc->ioctl_cmds.done); 269 if (ioc->bus_type == SAS) 270 ioc->schedule_target_reset(ioc); 271 } else { 272 ioc->ioctl_cmds.status &= ~MPT_MGMT_STATUS_PENDING; 273 complete(&ioc->ioctl_cmds.done); 274 } 275 } 276 277 out_continuation: 278 if (reply && (reply->u.reply.MsgFlags & 279 MPI_MSGFLAGS_CONTINUATION_REPLY)) 280 return 0; 281 return 1; 282 } 283 284 285 static int 286 mptctl_taskmgmt_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) 287 { 288 if (!mf) 289 return 0; 290 291 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 292 "TaskMgmt completed (mf=%p, mr=%p)\n", 293 ioc->name, mf, mr)); 294 295 ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD; 296 297 if (!mr) 298 goto out; 299 300 ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_RF_VALID; 301 memcpy(ioc->taskmgmt_cmds.reply, mr, 302 min(MPT_DEFAULT_FRAME_SIZE, 4 * mr->u.reply.MsgLength)); 303 out: 304 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) { 305 mpt_clear_taskmgmt_in_progress_flag(ioc); 306 ioc->taskmgmt_cmds.status &= ~MPT_MGMT_STATUS_PENDING; 307 complete(&ioc->taskmgmt_cmds.done); 308 if (ioc->bus_type == SAS) 309 ioc->schedule_target_reset(ioc); 310 return 1; 311 } 312 return 0; 313 } 314 315 static int 316 mptctl_do_taskmgmt(MPT_ADAPTER *ioc, u8 tm_type, u8 bus_id, u8 target_id) 317 { 318 MPT_FRAME_HDR *mf; 319 SCSITaskMgmt_t *pScsiTm; 320 SCSITaskMgmtReply_t *pScsiTmReply; 321 int ii; 322 int retval; 323 unsigned long timeout; 324 unsigned long time_count; 325 u16 iocstatus; 326 327 328 mutex_lock(&ioc->taskmgmt_cmds.mutex); 329 if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) { 330 mutex_unlock(&ioc->taskmgmt_cmds.mutex); 331 return -EPERM; 332 } 333 334 retval = 0; 335 336 mf = mpt_get_msg_frame(mptctl_taskmgmt_id, ioc); 337 if (mf == NULL) { 338 dtmprintk(ioc, 339 printk(MYIOC_s_WARN_FMT "TaskMgmt, no msg frames!!\n", 340 ioc->name)); 341 mpt_clear_taskmgmt_in_progress_flag(ioc); 342 retval = -ENOMEM; 343 goto tm_done; 344 } 345 346 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request (mf=%p)\n", 347 ioc->name, mf)); 348 349 pScsiTm = (SCSITaskMgmt_t *) mf; 350 memset(pScsiTm, 0, sizeof(SCSITaskMgmt_t)); 351 pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT; 352 pScsiTm->TaskType = tm_type; 353 if ((tm_type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS) && 354 (ioc->bus_type == FC)) 355 pScsiTm->MsgFlags = 356 MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION; 357 pScsiTm->TargetID = target_id; 358 pScsiTm->Bus = bus_id; 359 pScsiTm->ChainOffset = 0; 360 pScsiTm->Reserved = 0; 361 pScsiTm->Reserved1 = 0; 362 pScsiTm->TaskMsgContext = 0; 363 for (ii= 0; ii < 8; ii++) 364 pScsiTm->LUN[ii] = 0; 365 for (ii=0; ii < 7; ii++) 366 pScsiTm->Reserved2[ii] = 0; 367 368 switch (ioc->bus_type) { 369 case FC: 370 timeout = 40; 371 break; 372 case SAS: 373 timeout = 30; 374 break; 375 case SPI: 376 default: 377 timeout = 10; 378 break; 379 } 380 381 dtmprintk(ioc, 382 printk(MYIOC_s_DEBUG_FMT "TaskMgmt type=%d timeout=%ld\n", 383 ioc->name, tm_type, timeout)); 384 385 INITIALIZE_MGMT_STATUS(ioc->taskmgmt_cmds.status) 386 time_count = jiffies; 387 if ((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) && 388 (ioc->facts.MsgVersion >= MPI_VERSION_01_05)) 389 mpt_put_msg_frame_hi_pri(mptctl_taskmgmt_id, ioc, mf); 390 else { 391 retval = mpt_send_handshake_request(mptctl_taskmgmt_id, ioc, 392 sizeof(SCSITaskMgmt_t), (u32 *)pScsiTm, CAN_SLEEP); 393 if (retval != 0) { 394 dfailprintk(ioc, 395 printk(MYIOC_s_ERR_FMT 396 "TaskMgmt send_handshake FAILED!" 397 " (ioc %p, mf %p, rc=%d) \n", ioc->name, 398 ioc, mf, retval)); 399 mpt_free_msg_frame(ioc, mf); 400 mpt_clear_taskmgmt_in_progress_flag(ioc); 401 goto tm_done; 402 } 403 } 404 405 /* Now wait for the command to complete */ 406 ii = wait_for_completion_timeout(&ioc->taskmgmt_cmds.done, timeout*HZ); 407 408 if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { 409 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 410 "TaskMgmt failed\n", ioc->name)); 411 mpt_free_msg_frame(ioc, mf); 412 mpt_clear_taskmgmt_in_progress_flag(ioc); 413 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) 414 retval = 0; 415 else 416 retval = -1; /* return failure */ 417 goto tm_done; 418 } 419 420 if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_RF_VALID)) { 421 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 422 "TaskMgmt failed\n", ioc->name)); 423 retval = -1; /* return failure */ 424 goto tm_done; 425 } 426 427 pScsiTmReply = (SCSITaskMgmtReply_t *) ioc->taskmgmt_cmds.reply; 428 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 429 "TaskMgmt fw_channel = %d, fw_id = %d, task_type=0x%02X, " 430 "iocstatus=0x%04X\n\tloginfo=0x%08X, response_code=0x%02X, " 431 "term_cmnds=%d\n", ioc->name, pScsiTmReply->Bus, 432 pScsiTmReply->TargetID, tm_type, 433 le16_to_cpu(pScsiTmReply->IOCStatus), 434 le32_to_cpu(pScsiTmReply->IOCLogInfo), 435 pScsiTmReply->ResponseCode, 436 le32_to_cpu(pScsiTmReply->TerminationCount))); 437 438 iocstatus = le16_to_cpu(pScsiTmReply->IOCStatus) & MPI_IOCSTATUS_MASK; 439 440 if (iocstatus == MPI_IOCSTATUS_SCSI_TASK_TERMINATED || 441 iocstatus == MPI_IOCSTATUS_SCSI_IOC_TERMINATED || 442 iocstatus == MPI_IOCSTATUS_SUCCESS) 443 retval = 0; 444 else { 445 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 446 "TaskMgmt failed\n", ioc->name)); 447 retval = -1; /* return failure */ 448 } 449 450 tm_done: 451 mutex_unlock(&ioc->taskmgmt_cmds.mutex); 452 CLEAR_MGMT_STATUS(ioc->taskmgmt_cmds.status) 453 return retval; 454 } 455 456 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 457 /* mptctl_timeout_expired 458 * 459 * Expecting an interrupt, however timed out. 460 * 461 */ 462 static void 463 mptctl_timeout_expired(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf) 464 { 465 unsigned long flags; 466 int ret_val = -1; 467 SCSIIORequest_t *scsi_req = (SCSIIORequest_t *) mf; 468 u8 function = mf->u.hdr.Function; 469 470 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": %s\n", 471 ioc->name, __func__)); 472 473 if (mpt_fwfault_debug) 474 mpt_halt_firmware(ioc); 475 476 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 477 if (ioc->ioc_reset_in_progress) { 478 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 479 CLEAR_MGMT_PENDING_STATUS(ioc->ioctl_cmds.status) 480 mpt_free_msg_frame(ioc, mf); 481 return; 482 } 483 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 484 485 486 CLEAR_MGMT_PENDING_STATUS(ioc->ioctl_cmds.status) 487 488 if (ioc->bus_type == SAS) { 489 if (function == MPI_FUNCTION_SCSI_IO_REQUEST) 490 ret_val = mptctl_do_taskmgmt(ioc, 491 MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 492 scsi_req->Bus, scsi_req->TargetID); 493 else if (function == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) 494 ret_val = mptctl_do_taskmgmt(ioc, 495 MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS, 496 scsi_req->Bus, 0); 497 if (!ret_val) 498 return; 499 } else { 500 if ((function == MPI_FUNCTION_SCSI_IO_REQUEST) || 501 (function == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) 502 ret_val = mptctl_do_taskmgmt(ioc, 503 MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS, 504 scsi_req->Bus, 0); 505 if (!ret_val) 506 return; 507 } 508 509 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Calling Reset! \n", 510 ioc->name)); 511 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); 512 mpt_free_msg_frame(ioc, mf); 513 } 514 515 516 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 517 /* mptctl_ioc_reset 518 * 519 * Clean-up functionality. Used only if there has been a 520 * reload of the FW due. 521 * 522 */ 523 static int 524 mptctl_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) 525 { 526 switch(reset_phase) { 527 case MPT_IOC_SETUP_RESET: 528 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 529 "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__)); 530 break; 531 case MPT_IOC_PRE_RESET: 532 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 533 "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__)); 534 break; 535 case MPT_IOC_POST_RESET: 536 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 537 "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__)); 538 if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_PENDING) { 539 ioc->ioctl_cmds.status |= MPT_MGMT_STATUS_DID_IOCRESET; 540 complete(&ioc->ioctl_cmds.done); 541 } 542 break; 543 default: 544 break; 545 } 546 547 return 1; 548 } 549 550 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 551 /* ASYNC Event Notification Support */ 552 static int 553 mptctl_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) 554 { 555 u8 event; 556 557 event = le32_to_cpu(pEvReply->Event) & 0xFF; 558 559 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s() called\n", 560 ioc->name, __func__)); 561 if(async_queue == NULL) 562 return 1; 563 564 /* Raise SIGIO for persistent events. 565 * TODO - this define is not in MPI spec yet, 566 * but they plan to set it to 0x21 567 */ 568 if (event == 0x21 ) { 569 ioc->aen_event_read_flag=1; 570 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Raised SIGIO to application\n", 571 ioc->name)); 572 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT 573 "Raised SIGIO to application\n", ioc->name)); 574 kill_fasync(&async_queue, SIGIO, POLL_IN); 575 return 1; 576 } 577 578 /* This flag is set after SIGIO was raised, and 579 * remains set until the application has read 580 * the event log via ioctl=MPTEVENTREPORT 581 */ 582 if(ioc->aen_event_read_flag) 583 return 1; 584 585 /* Signal only for the events that are 586 * requested for by the application 587 */ 588 if (ioc->events && (ioc->eventTypes & ( 1 << event))) { 589 ioc->aen_event_read_flag=1; 590 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 591 "Raised SIGIO to application\n", ioc->name)); 592 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT 593 "Raised SIGIO to application\n", ioc->name)); 594 kill_fasync(&async_queue, SIGIO, POLL_IN); 595 } 596 return 1; 597 } 598 599 static int 600 mptctl_fasync(int fd, struct file *filep, int mode) 601 { 602 MPT_ADAPTER *ioc; 603 int ret; 604 605 mutex_lock(&mpctl_mutex); 606 list_for_each_entry(ioc, &ioc_list, list) 607 ioc->aen_event_read_flag=0; 608 609 ret = fasync_helper(fd, filep, mode, &async_queue); 610 mutex_unlock(&mpctl_mutex); 611 return ret; 612 } 613 614 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 615 /* 616 * MPT ioctl handler 617 * cmd - specify the particular IOCTL command to be issued 618 * arg - data specific to the command. Must not be null. 619 */ 620 static long 621 __mptctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg) 622 { 623 mpt_ioctl_header __user *uhdr = (void __user *) arg; 624 mpt_ioctl_header khdr; 625 int iocnum; 626 unsigned iocnumX; 627 int nonblock = (file->f_flags & O_NONBLOCK); 628 int ret; 629 MPT_ADAPTER *iocp = NULL; 630 631 if (copy_from_user(&khdr, uhdr, sizeof(khdr))) { 632 printk(KERN_ERR MYNAM "%s::mptctl_ioctl() @%d - " 633 "Unable to copy mpt_ioctl_header data @ %p\n", 634 __FILE__, __LINE__, uhdr); 635 return -EFAULT; 636 } 637 ret = -ENXIO; /* (-6) No such device or address */ 638 639 /* Verify intended MPT adapter - set iocnum and the adapter 640 * pointer (iocp) 641 */ 642 iocnumX = khdr.iocnum & 0xFF; 643 if (((iocnum = mpt_verify_adapter(iocnumX, &iocp)) < 0) || 644 (iocp == NULL)) 645 return -ENODEV; 646 647 if (!iocp->active) { 648 printk(KERN_DEBUG MYNAM "%s::mptctl_ioctl() @%d - Controller disabled.\n", 649 __FILE__, __LINE__); 650 return -EFAULT; 651 } 652 653 /* Handle those commands that are just returning 654 * information stored in the driver. 655 * These commands should never time out and are unaffected 656 * by TM and FW reloads. 657 */ 658 if ((cmd & ~IOCSIZE_MASK) == (MPTIOCINFO & ~IOCSIZE_MASK)) { 659 return mptctl_getiocinfo(arg, _IOC_SIZE(cmd)); 660 } else if (cmd == MPTTARGETINFO) { 661 return mptctl_gettargetinfo(arg); 662 } else if (cmd == MPTTEST) { 663 return mptctl_readtest(arg); 664 } else if (cmd == MPTEVENTQUERY) { 665 return mptctl_eventquery(arg); 666 } else if (cmd == MPTEVENTENABLE) { 667 return mptctl_eventenable(arg); 668 } else if (cmd == MPTEVENTREPORT) { 669 return mptctl_eventreport(arg); 670 } else if (cmd == MPTFWREPLACE) { 671 return mptctl_replace_fw(arg); 672 } 673 674 /* All of these commands require an interrupt or 675 * are unknown/illegal. 676 */ 677 if ((ret = mptctl_syscall_down(iocp, nonblock)) != 0) 678 return ret; 679 680 if (cmd == MPTFWDOWNLOAD) 681 ret = mptctl_fw_download(arg); 682 else if (cmd == MPTCOMMAND) 683 ret = mptctl_mpt_command(arg); 684 else if (cmd == MPTHARDRESET) 685 ret = mptctl_do_reset(arg); 686 else if ((cmd & ~IOCSIZE_MASK) == (HP_GETHOSTINFO & ~IOCSIZE_MASK)) 687 ret = mptctl_hp_hostinfo(arg, _IOC_SIZE(cmd)); 688 else if (cmd == HP_GETTARGETINFO) 689 ret = mptctl_hp_targetinfo(arg); 690 else 691 ret = -EINVAL; 692 693 mutex_unlock(&iocp->ioctl_cmds.mutex); 694 695 return ret; 696 } 697 698 static long 699 mptctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg) 700 { 701 long ret; 702 mutex_lock(&mpctl_mutex); 703 ret = __mptctl_ioctl(file, cmd, arg); 704 mutex_unlock(&mpctl_mutex); 705 return ret; 706 } 707 708 static int mptctl_do_reset(unsigned long arg) 709 { 710 struct mpt_ioctl_diag_reset __user *urinfo = (void __user *) arg; 711 struct mpt_ioctl_diag_reset krinfo; 712 MPT_ADAPTER *iocp; 713 714 if (copy_from_user(&krinfo, urinfo, sizeof(struct mpt_ioctl_diag_reset))) { 715 printk(KERN_ERR MYNAM "%s@%d::mptctl_do_reset - " 716 "Unable to copy mpt_ioctl_diag_reset struct @ %p\n", 717 __FILE__, __LINE__, urinfo); 718 return -EFAULT; 719 } 720 721 if (mpt_verify_adapter(krinfo.hdr.iocnum, &iocp) < 0) { 722 printk(KERN_DEBUG MYNAM "%s@%d::mptctl_do_reset - ioc%d not found!\n", 723 __FILE__, __LINE__, krinfo.hdr.iocnum); 724 return -ENODEV; /* (-6) No such device or address */ 725 } 726 727 dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "mptctl_do_reset called.\n", 728 iocp->name)); 729 730 if (mpt_HardResetHandler(iocp, CAN_SLEEP) != 0) { 731 printk (MYIOC_s_ERR_FMT "%s@%d::mptctl_do_reset - reset failed.\n", 732 iocp->name, __FILE__, __LINE__); 733 return -1; 734 } 735 736 return 0; 737 } 738 739 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 740 /* 741 * MPT FW download function. Cast the arg into the mpt_fw_xfer structure. 742 * This structure contains: iocnum, firmware length (bytes), 743 * pointer to user space memory where the fw image is stored. 744 * 745 * Outputs: None. 746 * Return: 0 if successful 747 * -EFAULT if data unavailable 748 * -ENXIO if no such device 749 * -EAGAIN if resource problem 750 * -ENOMEM if no memory for SGE 751 * -EMLINK if too many chain buffers required 752 * -EBADRQC if adapter does not support FW download 753 * -EBUSY if adapter is busy 754 * -ENOMSG if FW upload returned bad status 755 */ 756 static int 757 mptctl_fw_download(unsigned long arg) 758 { 759 struct mpt_fw_xfer __user *ufwdl = (void __user *) arg; 760 struct mpt_fw_xfer kfwdl; 761 762 if (copy_from_user(&kfwdl, ufwdl, sizeof(struct mpt_fw_xfer))) { 763 printk(KERN_ERR MYNAM "%s@%d::_ioctl_fwdl - " 764 "Unable to copy mpt_fw_xfer struct @ %p\n", 765 __FILE__, __LINE__, ufwdl); 766 return -EFAULT; 767 } 768 769 return mptctl_do_fw_download(kfwdl.iocnum, kfwdl.bufp, kfwdl.fwlen); 770 } 771 772 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 773 /* 774 * FW Download engine. 775 * Outputs: None. 776 * Return: 0 if successful 777 * -EFAULT if data unavailable 778 * -ENXIO if no such device 779 * -EAGAIN if resource problem 780 * -ENOMEM if no memory for SGE 781 * -EMLINK if too many chain buffers required 782 * -EBADRQC if adapter does not support FW download 783 * -EBUSY if adapter is busy 784 * -ENOMSG if FW upload returned bad status 785 */ 786 static int 787 mptctl_do_fw_download(int ioc, char __user *ufwbuf, size_t fwlen) 788 { 789 FWDownload_t *dlmsg; 790 MPT_FRAME_HDR *mf; 791 MPT_ADAPTER *iocp; 792 FWDownloadTCSGE_t *ptsge; 793 MptSge_t *sgl, *sgIn; 794 char *sgOut; 795 struct buflist *buflist; 796 struct buflist *bl; 797 dma_addr_t sgl_dma; 798 int ret; 799 int numfrags = 0; 800 int maxfrags; 801 int n = 0; 802 u32 sgdir; 803 u32 nib; 804 int fw_bytes_copied = 0; 805 int i; 806 int sge_offset = 0; 807 u16 iocstat; 808 pFWDownloadReply_t ReplyMsg = NULL; 809 unsigned long timeleft; 810 811 if (mpt_verify_adapter(ioc, &iocp) < 0) { 812 printk(KERN_DEBUG MYNAM "ioctl_fwdl - ioc%d not found!\n", 813 ioc); 814 return -ENODEV; /* (-6) No such device or address */ 815 } else { 816 817 /* Valid device. Get a message frame and construct the FW download message. 818 */ 819 if ((mf = mpt_get_msg_frame(mptctl_id, iocp)) == NULL) 820 return -EAGAIN; 821 } 822 823 dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT 824 "mptctl_do_fwdl called. mptctl_id = %xh.\n", iocp->name, mptctl_id)); 825 dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "DbG: kfwdl.bufp = %p\n", 826 iocp->name, ufwbuf)); 827 dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "DbG: kfwdl.fwlen = %d\n", 828 iocp->name, (int)fwlen)); 829 dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "DbG: kfwdl.ioc = %04xh\n", 830 iocp->name, ioc)); 831 832 dlmsg = (FWDownload_t*) mf; 833 ptsge = (FWDownloadTCSGE_t *) &dlmsg->SGL; 834 sgOut = (char *) (ptsge + 1); 835 836 /* 837 * Construct f/w download request 838 */ 839 dlmsg->ImageType = MPI_FW_DOWNLOAD_ITYPE_FW; 840 dlmsg->Reserved = 0; 841 dlmsg->ChainOffset = 0; 842 dlmsg->Function = MPI_FUNCTION_FW_DOWNLOAD; 843 dlmsg->Reserved1[0] = dlmsg->Reserved1[1] = dlmsg->Reserved1[2] = 0; 844 if (iocp->facts.MsgVersion >= MPI_VERSION_01_05) 845 dlmsg->MsgFlags = MPI_FW_DOWNLOAD_MSGFLGS_LAST_SEGMENT; 846 else 847 dlmsg->MsgFlags = 0; 848 849 850 /* Set up the Transaction SGE. 851 */ 852 ptsge->Reserved = 0; 853 ptsge->ContextSize = 0; 854 ptsge->DetailsLength = 12; 855 ptsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT; 856 ptsge->Reserved_0100_Checksum = 0; 857 ptsge->ImageOffset = 0; 858 ptsge->ImageSize = cpu_to_le32(fwlen); 859 860 /* Add the SGL 861 */ 862 863 /* 864 * Need to kmalloc area(s) for holding firmware image bytes. 865 * But we need to do it piece meal, using a proper 866 * scatter gather list (with 128kB MAX hunks). 867 * 868 * A practical limit here might be # of sg hunks that fit into 869 * a single IOC request frame; 12 or 8 (see below), so: 870 * For FC9xx: 12 x 128kB == 1.5 mB (max) 871 * For C1030: 8 x 128kB == 1 mB (max) 872 * We could support chaining, but things get ugly(ier:) 873 * 874 * Set the sge_offset to the start of the sgl (bytes). 875 */ 876 sgdir = 0x04000000; /* IOC will READ from sys mem */ 877 sge_offset = sizeof(MPIHeader_t) + sizeof(FWDownloadTCSGE_t); 878 if ((sgl = kbuf_alloc_2_sgl(fwlen, sgdir, sge_offset, 879 &numfrags, &buflist, &sgl_dma, iocp)) == NULL) 880 return -ENOMEM; 881 882 /* 883 * We should only need SGL with 2 simple_32bit entries (up to 256 kB) 884 * for FC9xx f/w image, but calculate max number of sge hunks 885 * we can fit into a request frame, and limit ourselves to that. 886 * (currently no chain support) 887 * maxfrags = (Request Size - FWdownload Size ) / Size of 32 bit SGE 888 * Request maxfrags 889 * 128 12 890 * 96 8 891 * 64 4 892 */ 893 maxfrags = (iocp->req_sz - sizeof(MPIHeader_t) - 894 sizeof(FWDownloadTCSGE_t)) 895 / iocp->SGE_size; 896 if (numfrags > maxfrags) { 897 ret = -EMLINK; 898 goto fwdl_out; 899 } 900 901 dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "DbG: sgl buffer = %p, sgfrags = %d\n", 902 iocp->name, sgl, numfrags)); 903 904 /* 905 * Parse SG list, copying sgl itself, 906 * plus f/w image hunks from user space as we go... 907 */ 908 ret = -EFAULT; 909 sgIn = sgl; 910 bl = buflist; 911 for (i=0; i < numfrags; i++) { 912 913 /* Get the SGE type: 0 - TCSGE, 3 - Chain, 1 - Simple SGE 914 * Skip everything but Simple. If simple, copy from 915 * user space into kernel space. 916 * Note: we should not have anything but Simple as 917 * Chain SGE are illegal. 918 */ 919 nib = (sgIn->FlagsLength & 0x30000000) >> 28; 920 if (nib == 0 || nib == 3) { 921 ; 922 } else if (sgIn->Address) { 923 iocp->add_sge(sgOut, sgIn->FlagsLength, sgIn->Address); 924 n++; 925 if (copy_from_user(bl->kptr, ufwbuf+fw_bytes_copied, bl->len)) { 926 printk(MYIOC_s_ERR_FMT "%s@%d::_ioctl_fwdl - " 927 "Unable to copy f/w buffer hunk#%d @ %p\n", 928 iocp->name, __FILE__, __LINE__, n, ufwbuf); 929 goto fwdl_out; 930 } 931 fw_bytes_copied += bl->len; 932 } 933 sgIn++; 934 bl++; 935 sgOut += iocp->SGE_size; 936 } 937 938 DBG_DUMP_FW_DOWNLOAD(iocp, (u32 *)mf, numfrags); 939 940 /* 941 * Finally, perform firmware download. 942 */ 943 ReplyMsg = NULL; 944 SET_MGMT_MSG_CONTEXT(iocp->ioctl_cmds.msg_context, dlmsg->MsgContext); 945 INITIALIZE_MGMT_STATUS(iocp->ioctl_cmds.status) 946 mpt_put_msg_frame(mptctl_id, iocp, mf); 947 948 /* Now wait for the command to complete */ 949 retry_wait: 950 timeleft = wait_for_completion_timeout(&iocp->ioctl_cmds.done, HZ*60); 951 if (!(iocp->ioctl_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { 952 ret = -ETIME; 953 printk(MYIOC_s_WARN_FMT "%s: failed\n", iocp->name, __func__); 954 if (iocp->ioctl_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) { 955 mpt_free_msg_frame(iocp, mf); 956 goto fwdl_out; 957 } 958 if (!timeleft) { 959 printk(MYIOC_s_WARN_FMT 960 "FW download timeout, doorbell=0x%08x\n", 961 iocp->name, mpt_GetIocState(iocp, 0)); 962 mptctl_timeout_expired(iocp, mf); 963 } else 964 goto retry_wait; 965 goto fwdl_out; 966 } 967 968 if (!(iocp->ioctl_cmds.status & MPT_MGMT_STATUS_RF_VALID)) { 969 printk(MYIOC_s_WARN_FMT "%s: failed\n", iocp->name, __func__); 970 mpt_free_msg_frame(iocp, mf); 971 ret = -ENODATA; 972 goto fwdl_out; 973 } 974 975 if (sgl) 976 kfree_sgl(sgl, sgl_dma, buflist, iocp); 977 978 ReplyMsg = (pFWDownloadReply_t)iocp->ioctl_cmds.reply; 979 iocstat = le16_to_cpu(ReplyMsg->IOCStatus) & MPI_IOCSTATUS_MASK; 980 if (iocstat == MPI_IOCSTATUS_SUCCESS) { 981 printk(MYIOC_s_INFO_FMT "F/W update successful!\n", iocp->name); 982 return 0; 983 } else if (iocstat == MPI_IOCSTATUS_INVALID_FUNCTION) { 984 printk(MYIOC_s_WARN_FMT "Hmmm... F/W download not supported!?!\n", 985 iocp->name); 986 printk(MYIOC_s_WARN_FMT "(time to go bang on somebodies door)\n", 987 iocp->name); 988 return -EBADRQC; 989 } else if (iocstat == MPI_IOCSTATUS_BUSY) { 990 printk(MYIOC_s_WARN_FMT "IOC_BUSY!\n", iocp->name); 991 printk(MYIOC_s_WARN_FMT "(try again later?)\n", iocp->name); 992 return -EBUSY; 993 } else { 994 printk(MYIOC_s_WARN_FMT "ioctl_fwdl() returned [bad] status = %04xh\n", 995 iocp->name, iocstat); 996 printk(MYIOC_s_WARN_FMT "(bad VooDoo)\n", iocp->name); 997 return -ENOMSG; 998 } 999 return 0; 1000 1001 fwdl_out: 1002 1003 CLEAR_MGMT_STATUS(iocp->ioctl_cmds.status); 1004 SET_MGMT_MSG_CONTEXT(iocp->ioctl_cmds.msg_context, 0); 1005 kfree_sgl(sgl, sgl_dma, buflist, iocp); 1006 return ret; 1007 } 1008 1009 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1010 /* 1011 * SGE Allocation routine 1012 * 1013 * Inputs: bytes - number of bytes to be transferred 1014 * sgdir - data direction 1015 * sge_offset - offset (in bytes) from the start of the request 1016 * frame to the first SGE 1017 * ioc - pointer to the mptadapter 1018 * Outputs: frags - number of scatter gather elements 1019 * blp - point to the buflist pointer 1020 * sglbuf_dma - pointer to the (dma) sgl 1021 * Returns: Null if failes 1022 * pointer to the (virtual) sgl if successful. 1023 */ 1024 static MptSge_t * 1025 kbuf_alloc_2_sgl(int bytes, u32 sgdir, int sge_offset, int *frags, 1026 struct buflist **blp, dma_addr_t *sglbuf_dma, MPT_ADAPTER *ioc) 1027 { 1028 MptSge_t *sglbuf = NULL; /* pointer to array of SGE */ 1029 /* and chain buffers */ 1030 struct buflist *buflist = NULL; /* kernel routine */ 1031 MptSge_t *sgl; 1032 int numfrags = 0; 1033 int fragcnt = 0; 1034 int alloc_sz = min(bytes,MAX_KMALLOC_SZ); // avoid kernel warning msg! 1035 int bytes_allocd = 0; 1036 int this_alloc; 1037 dma_addr_t pa; // phys addr 1038 int i, buflist_ent; 1039 int sg_spill = MAX_FRAGS_SPILL1; 1040 int dir; 1041 1042 if (bytes < 0) 1043 return NULL; 1044 1045 /* initialization */ 1046 *frags = 0; 1047 *blp = NULL; 1048 1049 /* Allocate and initialize an array of kernel 1050 * structures for the SG elements. 1051 */ 1052 i = MAX_SGL_BYTES / 8; 1053 buflist = kzalloc(i, GFP_USER); 1054 if (!buflist) 1055 return NULL; 1056 buflist_ent = 0; 1057 1058 /* Allocate a single block of memory to store the sg elements and 1059 * the chain buffers. The calling routine is responsible for 1060 * copying the data in this array into the correct place in the 1061 * request and chain buffers. 1062 */ 1063 sglbuf = pci_alloc_consistent(ioc->pcidev, MAX_SGL_BYTES, sglbuf_dma); 1064 if (sglbuf == NULL) 1065 goto free_and_fail; 1066 1067 if (sgdir & 0x04000000) 1068 dir = PCI_DMA_TODEVICE; 1069 else 1070 dir = PCI_DMA_FROMDEVICE; 1071 1072 /* At start: 1073 * sgl = sglbuf = point to beginning of sg buffer 1074 * buflist_ent = 0 = first kernel structure 1075 * sg_spill = number of SGE that can be written before the first 1076 * chain element. 1077 * 1078 */ 1079 sgl = sglbuf; 1080 sg_spill = ((ioc->req_sz - sge_offset)/ioc->SGE_size) - 1; 1081 while (bytes_allocd < bytes) { 1082 this_alloc = min(alloc_sz, bytes-bytes_allocd); 1083 buflist[buflist_ent].len = this_alloc; 1084 buflist[buflist_ent].kptr = pci_alloc_consistent(ioc->pcidev, 1085 this_alloc, 1086 &pa); 1087 if (buflist[buflist_ent].kptr == NULL) { 1088 alloc_sz = alloc_sz / 2; 1089 if (alloc_sz == 0) { 1090 printk(MYIOC_s_WARN_FMT "-SG: No can do - " 1091 "not enough memory! :-(\n", ioc->name); 1092 printk(MYIOC_s_WARN_FMT "-SG: (freeing %d frags)\n", 1093 ioc->name, numfrags); 1094 goto free_and_fail; 1095 } 1096 continue; 1097 } else { 1098 dma_addr_t dma_addr; 1099 1100 bytes_allocd += this_alloc; 1101 sgl->FlagsLength = (0x10000000|sgdir|this_alloc); 1102 dma_addr = pci_map_single(ioc->pcidev, 1103 buflist[buflist_ent].kptr, this_alloc, dir); 1104 sgl->Address = dma_addr; 1105 1106 fragcnt++; 1107 numfrags++; 1108 sgl++; 1109 buflist_ent++; 1110 } 1111 1112 if (bytes_allocd >= bytes) 1113 break; 1114 1115 /* Need to chain? */ 1116 if (fragcnt == sg_spill) { 1117 printk(MYIOC_s_WARN_FMT 1118 "-SG: No can do - " "Chain required! :-(\n", ioc->name); 1119 printk(MYIOC_s_WARN_FMT "(freeing %d frags)\n", ioc->name, numfrags); 1120 goto free_and_fail; 1121 } 1122 1123 /* overflow check... */ 1124 if (numfrags*8 > MAX_SGL_BYTES){ 1125 /* GRRRRR... */ 1126 printk(MYIOC_s_WARN_FMT "-SG: No can do - " 1127 "too many SG frags! :-(\n", ioc->name); 1128 printk(MYIOC_s_WARN_FMT "-SG: (freeing %d frags)\n", 1129 ioc->name, numfrags); 1130 goto free_and_fail; 1131 } 1132 } 1133 1134 /* Last sge fixup: set LE+eol+eob bits */ 1135 sgl[-1].FlagsLength |= 0xC1000000; 1136 1137 *frags = numfrags; 1138 *blp = buflist; 1139 1140 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "-SG: kbuf_alloc_2_sgl() - " 1141 "%d SG frags generated!\n", ioc->name, numfrags)); 1142 1143 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "-SG: kbuf_alloc_2_sgl() - " 1144 "last (big) alloc_sz=%d\n", ioc->name, alloc_sz)); 1145 1146 return sglbuf; 1147 1148 free_and_fail: 1149 if (sglbuf != NULL) { 1150 for (i = 0; i < numfrags; i++) { 1151 dma_addr_t dma_addr; 1152 u8 *kptr; 1153 int len; 1154 1155 if ((sglbuf[i].FlagsLength >> 24) == 0x30) 1156 continue; 1157 1158 dma_addr = sglbuf[i].Address; 1159 kptr = buflist[i].kptr; 1160 len = buflist[i].len; 1161 1162 pci_free_consistent(ioc->pcidev, len, kptr, dma_addr); 1163 } 1164 pci_free_consistent(ioc->pcidev, MAX_SGL_BYTES, sglbuf, *sglbuf_dma); 1165 } 1166 kfree(buflist); 1167 return NULL; 1168 } 1169 1170 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1171 /* 1172 * Routine to free the SGL elements. 1173 */ 1174 static void 1175 kfree_sgl(MptSge_t *sgl, dma_addr_t sgl_dma, struct buflist *buflist, MPT_ADAPTER *ioc) 1176 { 1177 MptSge_t *sg = sgl; 1178 struct buflist *bl = buflist; 1179 u32 nib; 1180 int dir; 1181 int n = 0; 1182 1183 if (sg->FlagsLength & 0x04000000) 1184 dir = PCI_DMA_TODEVICE; 1185 else 1186 dir = PCI_DMA_FROMDEVICE; 1187 1188 nib = (sg->FlagsLength & 0xF0000000) >> 28; 1189 while (! (nib & 0x4)) { /* eob */ 1190 /* skip ignore/chain. */ 1191 if (nib == 0 || nib == 3) { 1192 ; 1193 } else if (sg->Address) { 1194 dma_addr_t dma_addr; 1195 void *kptr; 1196 int len; 1197 1198 dma_addr = sg->Address; 1199 kptr = bl->kptr; 1200 len = bl->len; 1201 pci_unmap_single(ioc->pcidev, dma_addr, len, dir); 1202 pci_free_consistent(ioc->pcidev, len, kptr, dma_addr); 1203 n++; 1204 } 1205 sg++; 1206 bl++; 1207 nib = (le32_to_cpu(sg->FlagsLength) & 0xF0000000) >> 28; 1208 } 1209 1210 /* we're at eob! */ 1211 if (sg->Address) { 1212 dma_addr_t dma_addr; 1213 void *kptr; 1214 int len; 1215 1216 dma_addr = sg->Address; 1217 kptr = bl->kptr; 1218 len = bl->len; 1219 pci_unmap_single(ioc->pcidev, dma_addr, len, dir); 1220 pci_free_consistent(ioc->pcidev, len, kptr, dma_addr); 1221 n++; 1222 } 1223 1224 pci_free_consistent(ioc->pcidev, MAX_SGL_BYTES, sgl, sgl_dma); 1225 kfree(buflist); 1226 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "-SG: Free'd 1 SGL buf + %d kbufs!\n", 1227 ioc->name, n)); 1228 } 1229 1230 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1231 /* 1232 * mptctl_getiocinfo - Query the host adapter for IOC information. 1233 * @arg: User space argument 1234 * 1235 * Outputs: None. 1236 * Return: 0 if successful 1237 * -EFAULT if data unavailable 1238 * -ENODEV if no such device/adapter 1239 */ 1240 static int 1241 mptctl_getiocinfo (unsigned long arg, unsigned int data_size) 1242 { 1243 struct mpt_ioctl_iocinfo __user *uarg = (void __user *) arg; 1244 struct mpt_ioctl_iocinfo *karg; 1245 MPT_ADAPTER *ioc; 1246 struct pci_dev *pdev; 1247 int iocnum; 1248 unsigned int port; 1249 int cim_rev; 1250 struct scsi_device *sdev; 1251 VirtDevice *vdevice; 1252 1253 /* Add of PCI INFO results in unaligned access for 1254 * IA64 and Sparc. Reset long to int. Return no PCI 1255 * data for obsolete format. 1256 */ 1257 if (data_size == sizeof(struct mpt_ioctl_iocinfo_rev0)) 1258 cim_rev = 0; 1259 else if (data_size == sizeof(struct mpt_ioctl_iocinfo_rev1)) 1260 cim_rev = 1; 1261 else if (data_size == sizeof(struct mpt_ioctl_iocinfo)) 1262 cim_rev = 2; 1263 else if (data_size == (sizeof(struct mpt_ioctl_iocinfo_rev0)+12)) 1264 cim_rev = 0; /* obsolete */ 1265 else 1266 return -EFAULT; 1267 1268 karg = memdup_user(uarg, data_size); 1269 if (IS_ERR(karg)) { 1270 printk(KERN_ERR MYNAM "%s@%d::mpt_ioctl_iocinfo() - memdup_user returned error [%ld]\n", 1271 __FILE__, __LINE__, PTR_ERR(karg)); 1272 return PTR_ERR(karg); 1273 } 1274 1275 if (((iocnum = mpt_verify_adapter(karg->hdr.iocnum, &ioc)) < 0) || 1276 (ioc == NULL)) { 1277 printk(KERN_DEBUG MYNAM "%s::mptctl_getiocinfo() @%d - ioc%d not found!\n", 1278 __FILE__, __LINE__, iocnum); 1279 kfree(karg); 1280 return -ENODEV; 1281 } 1282 1283 /* Verify the data transfer size is correct. */ 1284 if (karg->hdr.maxDataSize != data_size) { 1285 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_getiocinfo - " 1286 "Structure size mismatch. Command not completed.\n", 1287 ioc->name, __FILE__, __LINE__); 1288 kfree(karg); 1289 return -EFAULT; 1290 } 1291 1292 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_getiocinfo called.\n", 1293 ioc->name)); 1294 1295 /* Fill in the data and return the structure to the calling 1296 * program 1297 */ 1298 if (ioc->bus_type == SAS) 1299 karg->adapterType = MPT_IOCTL_INTERFACE_SAS; 1300 else if (ioc->bus_type == FC) 1301 karg->adapterType = MPT_IOCTL_INTERFACE_FC; 1302 else 1303 karg->adapterType = MPT_IOCTL_INTERFACE_SCSI; 1304 1305 if (karg->hdr.port > 1) { 1306 kfree(karg); 1307 return -EINVAL; 1308 } 1309 port = karg->hdr.port; 1310 1311 karg->port = port; 1312 pdev = (struct pci_dev *) ioc->pcidev; 1313 1314 karg->pciId = pdev->device; 1315 karg->hwRev = pdev->revision; 1316 karg->subSystemDevice = pdev->subsystem_device; 1317 karg->subSystemVendor = pdev->subsystem_vendor; 1318 1319 if (cim_rev == 1) { 1320 /* Get the PCI bus, device, and function numbers for the IOC 1321 */ 1322 karg->pciInfo.u.bits.busNumber = pdev->bus->number; 1323 karg->pciInfo.u.bits.deviceNumber = PCI_SLOT( pdev->devfn ); 1324 karg->pciInfo.u.bits.functionNumber = PCI_FUNC( pdev->devfn ); 1325 } else if (cim_rev == 2) { 1326 /* Get the PCI bus, device, function and segment ID numbers 1327 for the IOC */ 1328 karg->pciInfo.u.bits.busNumber = pdev->bus->number; 1329 karg->pciInfo.u.bits.deviceNumber = PCI_SLOT( pdev->devfn ); 1330 karg->pciInfo.u.bits.functionNumber = PCI_FUNC( pdev->devfn ); 1331 karg->pciInfo.segmentID = pci_domain_nr(pdev->bus); 1332 } 1333 1334 /* Get number of devices 1335 */ 1336 karg->numDevices = 0; 1337 if (ioc->sh) { 1338 shost_for_each_device(sdev, ioc->sh) { 1339 vdevice = sdev->hostdata; 1340 if (vdevice == NULL || vdevice->vtarget == NULL) 1341 continue; 1342 if (vdevice->vtarget->tflags & 1343 MPT_TARGET_FLAGS_RAID_COMPONENT) 1344 continue; 1345 karg->numDevices++; 1346 } 1347 } 1348 1349 /* Set the BIOS and FW Version 1350 */ 1351 karg->FWVersion = ioc->facts.FWVersion.Word; 1352 karg->BIOSVersion = ioc->biosVersion; 1353 1354 /* Set the Version Strings. 1355 */ 1356 strncpy (karg->driverVersion, MPT_LINUX_PACKAGE_NAME, MPT_IOCTL_VERSION_LENGTH); 1357 karg->driverVersion[MPT_IOCTL_VERSION_LENGTH-1]='\0'; 1358 1359 karg->busChangeEvent = 0; 1360 karg->hostId = ioc->pfacts[port].PortSCSIID; 1361 karg->rsvd[0] = karg->rsvd[1] = 0; 1362 1363 /* Copy the data from kernel memory to user memory 1364 */ 1365 if (copy_to_user((char __user *)arg, karg, data_size)) { 1366 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_getiocinfo - " 1367 "Unable to write out mpt_ioctl_iocinfo struct @ %p\n", 1368 ioc->name, __FILE__, __LINE__, uarg); 1369 kfree(karg); 1370 return -EFAULT; 1371 } 1372 1373 kfree(karg); 1374 return 0; 1375 } 1376 1377 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1378 /* 1379 * mptctl_gettargetinfo - Query the host adapter for target information. 1380 * @arg: User space argument 1381 * 1382 * Outputs: None. 1383 * Return: 0 if successful 1384 * -EFAULT if data unavailable 1385 * -ENODEV if no such device/adapter 1386 */ 1387 static int 1388 mptctl_gettargetinfo (unsigned long arg) 1389 { 1390 struct mpt_ioctl_targetinfo __user *uarg = (void __user *) arg; 1391 struct mpt_ioctl_targetinfo karg; 1392 MPT_ADAPTER *ioc; 1393 VirtDevice *vdevice; 1394 char *pmem; 1395 int *pdata; 1396 int iocnum; 1397 int numDevices = 0; 1398 int lun; 1399 int maxWordsLeft; 1400 int numBytes; 1401 u8 port; 1402 struct scsi_device *sdev; 1403 1404 if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_targetinfo))) { 1405 printk(KERN_ERR MYNAM "%s@%d::mptctl_gettargetinfo - " 1406 "Unable to read in mpt_ioctl_targetinfo struct @ %p\n", 1407 __FILE__, __LINE__, uarg); 1408 return -EFAULT; 1409 } 1410 1411 if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || 1412 (ioc == NULL)) { 1413 printk(KERN_DEBUG MYNAM "%s::mptctl_gettargetinfo() @%d - ioc%d not found!\n", 1414 __FILE__, __LINE__, iocnum); 1415 return -ENODEV; 1416 } 1417 1418 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_gettargetinfo called.\n", 1419 ioc->name)); 1420 /* Get the port number and set the maximum number of bytes 1421 * in the returned structure. 1422 * Ignore the port setting. 1423 */ 1424 numBytes = karg.hdr.maxDataSize - sizeof(mpt_ioctl_header); 1425 maxWordsLeft = numBytes/sizeof(int); 1426 port = karg.hdr.port; 1427 1428 if (maxWordsLeft <= 0) { 1429 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_gettargetinfo() - no memory available!\n", 1430 ioc->name, __FILE__, __LINE__); 1431 return -ENOMEM; 1432 } 1433 1434 /* Fill in the data and return the structure to the calling 1435 * program 1436 */ 1437 1438 /* struct mpt_ioctl_targetinfo does not contain sufficient space 1439 * for the target structures so when the IOCTL is called, there is 1440 * not sufficient stack space for the structure. Allocate memory, 1441 * populate the memory, copy back to the user, then free memory. 1442 * targetInfo format: 1443 * bits 31-24: reserved 1444 * 23-16: LUN 1445 * 15- 8: Bus Number 1446 * 7- 0: Target ID 1447 */ 1448 pmem = kzalloc(numBytes, GFP_KERNEL); 1449 if (!pmem) { 1450 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_gettargetinfo() - no memory available!\n", 1451 ioc->name, __FILE__, __LINE__); 1452 return -ENOMEM; 1453 } 1454 pdata = (int *) pmem; 1455 1456 /* Get number of devices 1457 */ 1458 if (ioc->sh){ 1459 shost_for_each_device(sdev, ioc->sh) { 1460 if (!maxWordsLeft) 1461 continue; 1462 vdevice = sdev->hostdata; 1463 if (vdevice == NULL || vdevice->vtarget == NULL) 1464 continue; 1465 if (vdevice->vtarget->tflags & 1466 MPT_TARGET_FLAGS_RAID_COMPONENT) 1467 continue; 1468 lun = (vdevice->vtarget->raidVolume) ? 0x80 : vdevice->lun; 1469 *pdata = (((u8)lun << 16) + (vdevice->vtarget->channel << 8) + 1470 (vdevice->vtarget->id )); 1471 pdata++; 1472 numDevices++; 1473 --maxWordsLeft; 1474 } 1475 } 1476 karg.numDevices = numDevices; 1477 1478 /* Copy part of the data from kernel memory to user memory 1479 */ 1480 if (copy_to_user((char __user *)arg, &karg, 1481 sizeof(struct mpt_ioctl_targetinfo))) { 1482 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_gettargetinfo - " 1483 "Unable to write out mpt_ioctl_targetinfo struct @ %p\n", 1484 ioc->name, __FILE__, __LINE__, uarg); 1485 kfree(pmem); 1486 return -EFAULT; 1487 } 1488 1489 /* Copy the remaining data from kernel memory to user memory 1490 */ 1491 if (copy_to_user(uarg->targetInfo, pmem, numBytes)) { 1492 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_gettargetinfo - " 1493 "Unable to write out mpt_ioctl_targetinfo struct @ %p\n", 1494 ioc->name, __FILE__, __LINE__, pdata); 1495 kfree(pmem); 1496 return -EFAULT; 1497 } 1498 1499 kfree(pmem); 1500 1501 return 0; 1502 } 1503 1504 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1505 /* MPT IOCTL Test function. 1506 * 1507 * Outputs: None. 1508 * Return: 0 if successful 1509 * -EFAULT if data unavailable 1510 * -ENODEV if no such device/adapter 1511 */ 1512 static int 1513 mptctl_readtest (unsigned long arg) 1514 { 1515 struct mpt_ioctl_test __user *uarg = (void __user *) arg; 1516 struct mpt_ioctl_test karg; 1517 MPT_ADAPTER *ioc; 1518 int iocnum; 1519 1520 if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_test))) { 1521 printk(KERN_ERR MYNAM "%s@%d::mptctl_readtest - " 1522 "Unable to read in mpt_ioctl_test struct @ %p\n", 1523 __FILE__, __LINE__, uarg); 1524 return -EFAULT; 1525 } 1526 1527 if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || 1528 (ioc == NULL)) { 1529 printk(KERN_DEBUG MYNAM "%s::mptctl_readtest() @%d - ioc%d not found!\n", 1530 __FILE__, __LINE__, iocnum); 1531 return -ENODEV; 1532 } 1533 1534 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_readtest called.\n", 1535 ioc->name)); 1536 /* Fill in the data and return the structure to the calling 1537 * program 1538 */ 1539 1540 #ifdef MFCNT 1541 karg.chip_type = ioc->mfcnt; 1542 #else 1543 karg.chip_type = ioc->pcidev->device; 1544 #endif 1545 strncpy (karg.name, ioc->name, MPT_MAX_NAME); 1546 karg.name[MPT_MAX_NAME-1]='\0'; 1547 strncpy (karg.product, ioc->prod_name, MPT_PRODUCT_LENGTH); 1548 karg.product[MPT_PRODUCT_LENGTH-1]='\0'; 1549 1550 /* Copy the data from kernel memory to user memory 1551 */ 1552 if (copy_to_user((char __user *)arg, &karg, sizeof(struct mpt_ioctl_test))) { 1553 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_readtest - " 1554 "Unable to write out mpt_ioctl_test struct @ %p\n", 1555 ioc->name, __FILE__, __LINE__, uarg); 1556 return -EFAULT; 1557 } 1558 1559 return 0; 1560 } 1561 1562 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1563 /* 1564 * mptctl_eventquery - Query the host adapter for the event types 1565 * that are being logged. 1566 * @arg: User space argument 1567 * 1568 * Outputs: None. 1569 * Return: 0 if successful 1570 * -EFAULT if data unavailable 1571 * -ENODEV if no such device/adapter 1572 */ 1573 static int 1574 mptctl_eventquery (unsigned long arg) 1575 { 1576 struct mpt_ioctl_eventquery __user *uarg = (void __user *) arg; 1577 struct mpt_ioctl_eventquery karg; 1578 MPT_ADAPTER *ioc; 1579 int iocnum; 1580 1581 if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_eventquery))) { 1582 printk(KERN_ERR MYNAM "%s@%d::mptctl_eventquery - " 1583 "Unable to read in mpt_ioctl_eventquery struct @ %p\n", 1584 __FILE__, __LINE__, uarg); 1585 return -EFAULT; 1586 } 1587 1588 if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || 1589 (ioc == NULL)) { 1590 printk(KERN_DEBUG MYNAM "%s::mptctl_eventquery() @%d - ioc%d not found!\n", 1591 __FILE__, __LINE__, iocnum); 1592 return -ENODEV; 1593 } 1594 1595 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_eventquery called.\n", 1596 ioc->name)); 1597 karg.eventEntries = MPTCTL_EVENT_LOG_SIZE; 1598 karg.eventTypes = ioc->eventTypes; 1599 1600 /* Copy the data from kernel memory to user memory 1601 */ 1602 if (copy_to_user((char __user *)arg, &karg, sizeof(struct mpt_ioctl_eventquery))) { 1603 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_eventquery - " 1604 "Unable to write out mpt_ioctl_eventquery struct @ %p\n", 1605 ioc->name, __FILE__, __LINE__, uarg); 1606 return -EFAULT; 1607 } 1608 return 0; 1609 } 1610 1611 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1612 static int 1613 mptctl_eventenable (unsigned long arg) 1614 { 1615 struct mpt_ioctl_eventenable __user *uarg = (void __user *) arg; 1616 struct mpt_ioctl_eventenable karg; 1617 MPT_ADAPTER *ioc; 1618 int iocnum; 1619 1620 if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_eventenable))) { 1621 printk(KERN_ERR MYNAM "%s@%d::mptctl_eventenable - " 1622 "Unable to read in mpt_ioctl_eventenable struct @ %p\n", 1623 __FILE__, __LINE__, uarg); 1624 return -EFAULT; 1625 } 1626 1627 if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || 1628 (ioc == NULL)) { 1629 printk(KERN_DEBUG MYNAM "%s::mptctl_eventenable() @%d - ioc%d not found!\n", 1630 __FILE__, __LINE__, iocnum); 1631 return -ENODEV; 1632 } 1633 1634 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_eventenable called.\n", 1635 ioc->name)); 1636 if (ioc->events == NULL) { 1637 /* Have not yet allocated memory - do so now. 1638 */ 1639 int sz = MPTCTL_EVENT_LOG_SIZE * sizeof(MPT_IOCTL_EVENTS); 1640 ioc->events = kzalloc(sz, GFP_KERNEL); 1641 if (!ioc->events) { 1642 printk(MYIOC_s_ERR_FMT 1643 ": ERROR - Insufficient memory to add adapter!\n", 1644 ioc->name); 1645 return -ENOMEM; 1646 } 1647 ioc->alloc_total += sz; 1648 1649 ioc->eventContext = 0; 1650 } 1651 1652 /* Update the IOC event logging flag. 1653 */ 1654 ioc->eventTypes = karg.eventTypes; 1655 1656 return 0; 1657 } 1658 1659 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1660 static int 1661 mptctl_eventreport (unsigned long arg) 1662 { 1663 struct mpt_ioctl_eventreport __user *uarg = (void __user *) arg; 1664 struct mpt_ioctl_eventreport karg; 1665 MPT_ADAPTER *ioc; 1666 int iocnum; 1667 int numBytes, maxEvents, max; 1668 1669 if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_eventreport))) { 1670 printk(KERN_ERR MYNAM "%s@%d::mptctl_eventreport - " 1671 "Unable to read in mpt_ioctl_eventreport struct @ %p\n", 1672 __FILE__, __LINE__, uarg); 1673 return -EFAULT; 1674 } 1675 1676 if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || 1677 (ioc == NULL)) { 1678 printk(KERN_DEBUG MYNAM "%s::mptctl_eventreport() @%d - ioc%d not found!\n", 1679 __FILE__, __LINE__, iocnum); 1680 return -ENODEV; 1681 } 1682 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_eventreport called.\n", 1683 ioc->name)); 1684 1685 numBytes = karg.hdr.maxDataSize - sizeof(mpt_ioctl_header); 1686 maxEvents = numBytes/sizeof(MPT_IOCTL_EVENTS); 1687 1688 1689 max = MPTCTL_EVENT_LOG_SIZE < maxEvents ? MPTCTL_EVENT_LOG_SIZE : maxEvents; 1690 1691 /* If fewer than 1 event is requested, there must have 1692 * been some type of error. 1693 */ 1694 if ((max < 1) || !ioc->events) 1695 return -ENODATA; 1696 1697 /* reset this flag so SIGIO can restart */ 1698 ioc->aen_event_read_flag=0; 1699 1700 /* Copy the data from kernel memory to user memory 1701 */ 1702 numBytes = max * sizeof(MPT_IOCTL_EVENTS); 1703 if (copy_to_user(uarg->eventData, ioc->events, numBytes)) { 1704 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_eventreport - " 1705 "Unable to write out mpt_ioctl_eventreport struct @ %p\n", 1706 ioc->name, __FILE__, __LINE__, ioc->events); 1707 return -EFAULT; 1708 } 1709 1710 return 0; 1711 } 1712 1713 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1714 static int 1715 mptctl_replace_fw (unsigned long arg) 1716 { 1717 struct mpt_ioctl_replace_fw __user *uarg = (void __user *) arg; 1718 struct mpt_ioctl_replace_fw karg; 1719 MPT_ADAPTER *ioc; 1720 int iocnum; 1721 int newFwSize; 1722 1723 if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_replace_fw))) { 1724 printk(KERN_ERR MYNAM "%s@%d::mptctl_replace_fw - " 1725 "Unable to read in mpt_ioctl_replace_fw struct @ %p\n", 1726 __FILE__, __LINE__, uarg); 1727 return -EFAULT; 1728 } 1729 1730 if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || 1731 (ioc == NULL)) { 1732 printk(KERN_DEBUG MYNAM "%s::mptctl_replace_fw() @%d - ioc%d not found!\n", 1733 __FILE__, __LINE__, iocnum); 1734 return -ENODEV; 1735 } 1736 1737 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_replace_fw called.\n", 1738 ioc->name)); 1739 /* If caching FW, Free the old FW image 1740 */ 1741 if (ioc->cached_fw == NULL) 1742 return 0; 1743 1744 mpt_free_fw_memory(ioc); 1745 1746 /* Allocate memory for the new FW image 1747 */ 1748 newFwSize = ALIGN(karg.newImageSize, 4); 1749 1750 mpt_alloc_fw_memory(ioc, newFwSize); 1751 if (ioc->cached_fw == NULL) 1752 return -ENOMEM; 1753 1754 /* Copy the data from user memory to kernel space 1755 */ 1756 if (copy_from_user(ioc->cached_fw, uarg->newImage, newFwSize)) { 1757 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_replace_fw - " 1758 "Unable to read in mpt_ioctl_replace_fw image " 1759 "@ %p\n", ioc->name, __FILE__, __LINE__, uarg); 1760 mpt_free_fw_memory(ioc); 1761 return -EFAULT; 1762 } 1763 1764 /* Update IOCFactsReply 1765 */ 1766 ioc->facts.FWImageSize = newFwSize; 1767 return 0; 1768 } 1769 1770 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1771 /* MPT IOCTL MPTCOMMAND function. 1772 * Cast the arg into the mpt_ioctl_mpt_command structure. 1773 * 1774 * Outputs: None. 1775 * Return: 0 if successful 1776 * -EBUSY if previous command timeout and IOC reset is not complete. 1777 * -EFAULT if data unavailable 1778 * -ENODEV if no such device/adapter 1779 * -ETIME if timer expires 1780 * -ENOMEM if memory allocation error 1781 */ 1782 static int 1783 mptctl_mpt_command (unsigned long arg) 1784 { 1785 struct mpt_ioctl_command __user *uarg = (void __user *) arg; 1786 struct mpt_ioctl_command karg; 1787 MPT_ADAPTER *ioc; 1788 int iocnum; 1789 int rc; 1790 1791 1792 if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_command))) { 1793 printk(KERN_ERR MYNAM "%s@%d::mptctl_mpt_command - " 1794 "Unable to read in mpt_ioctl_command struct @ %p\n", 1795 __FILE__, __LINE__, uarg); 1796 return -EFAULT; 1797 } 1798 1799 if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || 1800 (ioc == NULL)) { 1801 printk(KERN_DEBUG MYNAM "%s::mptctl_mpt_command() @%d - ioc%d not found!\n", 1802 __FILE__, __LINE__, iocnum); 1803 return -ENODEV; 1804 } 1805 1806 rc = mptctl_do_mpt_command (karg, &uarg->MF); 1807 1808 return rc; 1809 } 1810 1811 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1812 /* Worker routine for the IOCTL MPTCOMMAND and MPTCOMMAND32 (sparc) commands. 1813 * 1814 * Outputs: None. 1815 * Return: 0 if successful 1816 * -EBUSY if previous command timeout and IOC reset is not complete. 1817 * -EFAULT if data unavailable 1818 * -ENODEV if no such device/adapter 1819 * -ETIME if timer expires 1820 * -ENOMEM if memory allocation error 1821 * -EPERM if SCSI I/O and target is untagged 1822 */ 1823 static int 1824 mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr) 1825 { 1826 MPT_ADAPTER *ioc; 1827 MPT_FRAME_HDR *mf = NULL; 1828 MPIHeader_t *hdr; 1829 char *psge; 1830 struct buflist bufIn; /* data In buffer */ 1831 struct buflist bufOut; /* data Out buffer */ 1832 dma_addr_t dma_addr_in; 1833 dma_addr_t dma_addr_out; 1834 int sgSize = 0; /* Num SG elements */ 1835 int iocnum, flagsLength; 1836 int sz, rc = 0; 1837 int msgContext; 1838 u16 req_idx; 1839 ulong timeout; 1840 unsigned long timeleft; 1841 struct scsi_device *sdev; 1842 unsigned long flags; 1843 u8 function; 1844 1845 /* bufIn and bufOut are used for user to kernel space transfers 1846 */ 1847 bufIn.kptr = bufOut.kptr = NULL; 1848 bufIn.len = bufOut.len = 0; 1849 1850 if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || 1851 (ioc == NULL)) { 1852 printk(KERN_DEBUG MYNAM "%s::mptctl_do_mpt_command() @%d - ioc%d not found!\n", 1853 __FILE__, __LINE__, iocnum); 1854 return -ENODEV; 1855 } 1856 1857 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 1858 if (ioc->ioc_reset_in_progress) { 1859 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 1860 printk(KERN_ERR MYNAM "%s@%d::mptctl_do_mpt_command - " 1861 "Busy with diagnostic reset\n", __FILE__, __LINE__); 1862 return -EBUSY; 1863 } 1864 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 1865 1866 /* Basic sanity checks to prevent underflows or integer overflows */ 1867 if (karg.maxReplyBytes < 0 || 1868 karg.dataInSize < 0 || 1869 karg.dataOutSize < 0 || 1870 karg.dataSgeOffset < 0 || 1871 karg.maxSenseBytes < 0 || 1872 karg.dataSgeOffset > ioc->req_sz / 4) 1873 return -EINVAL; 1874 1875 /* Verify that the final request frame will not be too large. 1876 */ 1877 sz = karg.dataSgeOffset * 4; 1878 if (karg.dataInSize > 0) 1879 sz += ioc->SGE_size; 1880 if (karg.dataOutSize > 0) 1881 sz += ioc->SGE_size; 1882 1883 if (sz > ioc->req_sz) { 1884 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - " 1885 "Request frame too large (%d) maximum (%d)\n", 1886 ioc->name, __FILE__, __LINE__, sz, ioc->req_sz); 1887 return -EFAULT; 1888 } 1889 1890 /* Get a free request frame and save the message context. 1891 */ 1892 if ((mf = mpt_get_msg_frame(mptctl_id, ioc)) == NULL) 1893 return -EAGAIN; 1894 1895 hdr = (MPIHeader_t *) mf; 1896 msgContext = le32_to_cpu(hdr->MsgContext); 1897 req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx); 1898 1899 /* Copy the request frame 1900 * Reset the saved message context. 1901 * Request frame in user space 1902 */ 1903 if (copy_from_user(mf, mfPtr, karg.dataSgeOffset * 4)) { 1904 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - " 1905 "Unable to read MF from mpt_ioctl_command struct @ %p\n", 1906 ioc->name, __FILE__, __LINE__, mfPtr); 1907 function = -1; 1908 rc = -EFAULT; 1909 goto done_free_mem; 1910 } 1911 hdr->MsgContext = cpu_to_le32(msgContext); 1912 function = hdr->Function; 1913 1914 1915 /* Verify that this request is allowed. 1916 */ 1917 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "sending mpi function (0x%02X), req=%p\n", 1918 ioc->name, hdr->Function, mf)); 1919 1920 switch (function) { 1921 case MPI_FUNCTION_IOC_FACTS: 1922 case MPI_FUNCTION_PORT_FACTS: 1923 karg.dataOutSize = karg.dataInSize = 0; 1924 break; 1925 1926 case MPI_FUNCTION_CONFIG: 1927 { 1928 Config_t *config_frame; 1929 config_frame = (Config_t *)mf; 1930 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "\ttype=0x%02x ext_type=0x%02x " 1931 "number=0x%02x action=0x%02x\n", ioc->name, 1932 config_frame->Header.PageType, 1933 config_frame->ExtPageType, 1934 config_frame->Header.PageNumber, 1935 config_frame->Action)); 1936 break; 1937 } 1938 1939 case MPI_FUNCTION_FC_COMMON_TRANSPORT_SEND: 1940 case MPI_FUNCTION_FC_EX_LINK_SRVC_SEND: 1941 case MPI_FUNCTION_FW_UPLOAD: 1942 case MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR: 1943 case MPI_FUNCTION_FW_DOWNLOAD: 1944 case MPI_FUNCTION_FC_PRIMITIVE_SEND: 1945 case MPI_FUNCTION_TOOLBOX: 1946 case MPI_FUNCTION_SAS_IO_UNIT_CONTROL: 1947 break; 1948 1949 case MPI_FUNCTION_SCSI_IO_REQUEST: 1950 if (ioc->sh) { 1951 SCSIIORequest_t *pScsiReq = (SCSIIORequest_t *) mf; 1952 int qtag = MPI_SCSIIO_CONTROL_UNTAGGED; 1953 int scsidir = 0; 1954 int dataSize; 1955 u32 id; 1956 1957 id = (ioc->devices_per_bus == 0) ? 256 : ioc->devices_per_bus; 1958 if (pScsiReq->TargetID > id) { 1959 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - " 1960 "Target ID out of bounds. \n", 1961 ioc->name, __FILE__, __LINE__); 1962 rc = -ENODEV; 1963 goto done_free_mem; 1964 } 1965 1966 if (pScsiReq->Bus >= ioc->number_of_buses) { 1967 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - " 1968 "Target Bus out of bounds. \n", 1969 ioc->name, __FILE__, __LINE__); 1970 rc = -ENODEV; 1971 goto done_free_mem; 1972 } 1973 1974 pScsiReq->MsgFlags &= ~MPI_SCSIIO_MSGFLGS_SENSE_WIDTH; 1975 pScsiReq->MsgFlags |= mpt_msg_flags(ioc); 1976 1977 1978 /* verify that app has not requested 1979 * more sense data than driver 1980 * can provide, if so, reset this parameter 1981 * set the sense buffer pointer low address 1982 * update the control field to specify Q type 1983 */ 1984 if (karg.maxSenseBytes > MPT_SENSE_BUFFER_SIZE) 1985 pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE; 1986 else 1987 pScsiReq->SenseBufferLength = karg.maxSenseBytes; 1988 1989 pScsiReq->SenseBufferLowAddr = 1990 cpu_to_le32(ioc->sense_buf_low_dma 1991 + (req_idx * MPT_SENSE_BUFFER_ALLOC)); 1992 1993 shost_for_each_device(sdev, ioc->sh) { 1994 struct scsi_target *starget = scsi_target(sdev); 1995 VirtTarget *vtarget = starget->hostdata; 1996 1997 if (vtarget == NULL) 1998 continue; 1999 2000 if ((pScsiReq->TargetID == vtarget->id) && 2001 (pScsiReq->Bus == vtarget->channel) && 2002 (vtarget->tflags & MPT_TARGET_FLAGS_Q_YES)) 2003 qtag = MPI_SCSIIO_CONTROL_SIMPLEQ; 2004 } 2005 2006 /* Have the IOCTL driver set the direction based 2007 * on the dataOutSize (ordering issue with Sparc). 2008 */ 2009 if (karg.dataOutSize > 0) { 2010 scsidir = MPI_SCSIIO_CONTROL_WRITE; 2011 dataSize = karg.dataOutSize; 2012 } else { 2013 scsidir = MPI_SCSIIO_CONTROL_READ; 2014 dataSize = karg.dataInSize; 2015 } 2016 2017 pScsiReq->Control = cpu_to_le32(scsidir | qtag); 2018 pScsiReq->DataLength = cpu_to_le32(dataSize); 2019 2020 2021 } else { 2022 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - " 2023 "SCSI driver is not loaded. \n", 2024 ioc->name, __FILE__, __LINE__); 2025 rc = -EFAULT; 2026 goto done_free_mem; 2027 } 2028 break; 2029 2030 case MPI_FUNCTION_SMP_PASSTHROUGH: 2031 /* Check mf->PassthruFlags to determine if 2032 * transfer is ImmediateMode or not. 2033 * Immediate mode returns data in the ReplyFrame. 2034 * Else, we are sending request and response data 2035 * in two SGLs at the end of the mf. 2036 */ 2037 break; 2038 2039 case MPI_FUNCTION_SATA_PASSTHROUGH: 2040 if (!ioc->sh) { 2041 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - " 2042 "SCSI driver is not loaded. \n", 2043 ioc->name, __FILE__, __LINE__); 2044 rc = -EFAULT; 2045 goto done_free_mem; 2046 } 2047 break; 2048 2049 case MPI_FUNCTION_RAID_ACTION: 2050 /* Just add a SGE 2051 */ 2052 break; 2053 2054 case MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH: 2055 if (ioc->sh) { 2056 SCSIIORequest_t *pScsiReq = (SCSIIORequest_t *) mf; 2057 int qtag = MPI_SCSIIO_CONTROL_SIMPLEQ; 2058 int scsidir = MPI_SCSIIO_CONTROL_READ; 2059 int dataSize; 2060 2061 pScsiReq->MsgFlags &= ~MPI_SCSIIO_MSGFLGS_SENSE_WIDTH; 2062 pScsiReq->MsgFlags |= mpt_msg_flags(ioc); 2063 2064 2065 /* verify that app has not requested 2066 * more sense data than driver 2067 * can provide, if so, reset this parameter 2068 * set the sense buffer pointer low address 2069 * update the control field to specify Q type 2070 */ 2071 if (karg.maxSenseBytes > MPT_SENSE_BUFFER_SIZE) 2072 pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE; 2073 else 2074 pScsiReq->SenseBufferLength = karg.maxSenseBytes; 2075 2076 pScsiReq->SenseBufferLowAddr = 2077 cpu_to_le32(ioc->sense_buf_low_dma 2078 + (req_idx * MPT_SENSE_BUFFER_ALLOC)); 2079 2080 /* All commands to physical devices are tagged 2081 */ 2082 2083 /* Have the IOCTL driver set the direction based 2084 * on the dataOutSize (ordering issue with Sparc). 2085 */ 2086 if (karg.dataOutSize > 0) { 2087 scsidir = MPI_SCSIIO_CONTROL_WRITE; 2088 dataSize = karg.dataOutSize; 2089 } else { 2090 scsidir = MPI_SCSIIO_CONTROL_READ; 2091 dataSize = karg.dataInSize; 2092 } 2093 2094 pScsiReq->Control = cpu_to_le32(scsidir | qtag); 2095 pScsiReq->DataLength = cpu_to_le32(dataSize); 2096 2097 } else { 2098 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - " 2099 "SCSI driver is not loaded. \n", 2100 ioc->name, __FILE__, __LINE__); 2101 rc = -EFAULT; 2102 goto done_free_mem; 2103 } 2104 break; 2105 2106 case MPI_FUNCTION_SCSI_TASK_MGMT: 2107 { 2108 SCSITaskMgmt_t *pScsiTm; 2109 pScsiTm = (SCSITaskMgmt_t *)mf; 2110 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2111 "\tTaskType=0x%x MsgFlags=0x%x " 2112 "TaskMsgContext=0x%x id=%d channel=%d\n", 2113 ioc->name, pScsiTm->TaskType, le32_to_cpu 2114 (pScsiTm->TaskMsgContext), pScsiTm->MsgFlags, 2115 pScsiTm->TargetID, pScsiTm->Bus)); 2116 break; 2117 } 2118 2119 case MPI_FUNCTION_IOC_INIT: 2120 { 2121 IOCInit_t *pInit = (IOCInit_t *) mf; 2122 u32 high_addr, sense_high; 2123 2124 /* Verify that all entries in the IOC INIT match 2125 * existing setup (and in LE format). 2126 */ 2127 if (sizeof(dma_addr_t) == sizeof(u64)) { 2128 high_addr = cpu_to_le32((u32)((u64)ioc->req_frames_dma >> 32)); 2129 sense_high= cpu_to_le32((u32)((u64)ioc->sense_buf_pool_dma >> 32)); 2130 } else { 2131 high_addr = 0; 2132 sense_high= 0; 2133 } 2134 2135 if ((pInit->Flags != 0) || (pInit->MaxDevices != ioc->facts.MaxDevices) || 2136 (pInit->MaxBuses != ioc->facts.MaxBuses) || 2137 (pInit->ReplyFrameSize != cpu_to_le16(ioc->reply_sz)) || 2138 (pInit->HostMfaHighAddr != high_addr) || 2139 (pInit->SenseBufferHighAddr != sense_high)) { 2140 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - " 2141 "IOC_INIT issued with 1 or more incorrect parameters. Rejected.\n", 2142 ioc->name, __FILE__, __LINE__); 2143 rc = -EFAULT; 2144 goto done_free_mem; 2145 } 2146 } 2147 break; 2148 default: 2149 /* 2150 * MPI_FUNCTION_PORT_ENABLE 2151 * MPI_FUNCTION_TARGET_CMD_BUFFER_POST 2152 * MPI_FUNCTION_TARGET_ASSIST 2153 * MPI_FUNCTION_TARGET_STATUS_SEND 2154 * MPI_FUNCTION_TARGET_MODE_ABORT 2155 * MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET 2156 * MPI_FUNCTION_IO_UNIT_RESET 2157 * MPI_FUNCTION_HANDSHAKE 2158 * MPI_FUNCTION_REPLY_FRAME_REMOVAL 2159 * MPI_FUNCTION_EVENT_NOTIFICATION 2160 * (driver handles event notification) 2161 * MPI_FUNCTION_EVENT_ACK 2162 */ 2163 2164 /* What to do with these??? CHECK ME!!! 2165 MPI_FUNCTION_FC_LINK_SRVC_BUF_POST 2166 MPI_FUNCTION_FC_LINK_SRVC_RSP 2167 MPI_FUNCTION_FC_ABORT 2168 MPI_FUNCTION_LAN_SEND 2169 MPI_FUNCTION_LAN_RECEIVE 2170 MPI_FUNCTION_LAN_RESET 2171 */ 2172 2173 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - " 2174 "Illegal request (function 0x%x) \n", 2175 ioc->name, __FILE__, __LINE__, hdr->Function); 2176 rc = -EFAULT; 2177 goto done_free_mem; 2178 } 2179 2180 /* Add the SGL ( at most one data in SGE and one data out SGE ) 2181 * In the case of two SGE's - the data out (write) will always 2182 * preceede the data in (read) SGE. psgList is used to free the 2183 * allocated memory. 2184 */ 2185 psge = (char *) (((int *) mf) + karg.dataSgeOffset); 2186 flagsLength = 0; 2187 2188 if (karg.dataOutSize > 0) 2189 sgSize ++; 2190 2191 if (karg.dataInSize > 0) 2192 sgSize ++; 2193 2194 if (sgSize > 0) { 2195 2196 /* Set up the dataOut memory allocation */ 2197 if (karg.dataOutSize > 0) { 2198 if (karg.dataInSize > 0) { 2199 flagsLength = ( MPI_SGE_FLAGS_SIMPLE_ELEMENT | 2200 MPI_SGE_FLAGS_END_OF_BUFFER | 2201 MPI_SGE_FLAGS_DIRECTION) 2202 << MPI_SGE_FLAGS_SHIFT; 2203 } else { 2204 flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE; 2205 } 2206 flagsLength |= karg.dataOutSize; 2207 bufOut.len = karg.dataOutSize; 2208 bufOut.kptr = pci_alloc_consistent( 2209 ioc->pcidev, bufOut.len, &dma_addr_out); 2210 2211 if (bufOut.kptr == NULL) { 2212 rc = -ENOMEM; 2213 goto done_free_mem; 2214 } else { 2215 /* Set up this SGE. 2216 * Copy to MF and to sglbuf 2217 */ 2218 ioc->add_sge(psge, flagsLength, dma_addr_out); 2219 psge += ioc->SGE_size; 2220 2221 /* Copy user data to kernel space. 2222 */ 2223 if (copy_from_user(bufOut.kptr, 2224 karg.dataOutBufPtr, 2225 bufOut.len)) { 2226 printk(MYIOC_s_ERR_FMT 2227 "%s@%d::mptctl_do_mpt_command - Unable " 2228 "to read user data " 2229 "struct @ %p\n", 2230 ioc->name, __FILE__, __LINE__,karg.dataOutBufPtr); 2231 rc = -EFAULT; 2232 goto done_free_mem; 2233 } 2234 } 2235 } 2236 2237 if (karg.dataInSize > 0) { 2238 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ; 2239 flagsLength |= karg.dataInSize; 2240 2241 bufIn.len = karg.dataInSize; 2242 bufIn.kptr = pci_alloc_consistent(ioc->pcidev, 2243 bufIn.len, &dma_addr_in); 2244 2245 if (bufIn.kptr == NULL) { 2246 rc = -ENOMEM; 2247 goto done_free_mem; 2248 } else { 2249 /* Set up this SGE 2250 * Copy to MF and to sglbuf 2251 */ 2252 ioc->add_sge(psge, flagsLength, dma_addr_in); 2253 } 2254 } 2255 } else { 2256 /* Add a NULL SGE 2257 */ 2258 ioc->add_sge(psge, flagsLength, (dma_addr_t) -1); 2259 } 2260 2261 SET_MGMT_MSG_CONTEXT(ioc->ioctl_cmds.msg_context, hdr->MsgContext); 2262 INITIALIZE_MGMT_STATUS(ioc->ioctl_cmds.status) 2263 if (hdr->Function == MPI_FUNCTION_SCSI_TASK_MGMT) { 2264 2265 mutex_lock(&ioc->taskmgmt_cmds.mutex); 2266 if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) { 2267 mutex_unlock(&ioc->taskmgmt_cmds.mutex); 2268 goto done_free_mem; 2269 } 2270 2271 DBG_DUMP_TM_REQUEST_FRAME(ioc, (u32 *)mf); 2272 2273 if ((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) && 2274 (ioc->facts.MsgVersion >= MPI_VERSION_01_05)) 2275 mpt_put_msg_frame_hi_pri(mptctl_id, ioc, mf); 2276 else { 2277 rc =mpt_send_handshake_request(mptctl_id, ioc, 2278 sizeof(SCSITaskMgmt_t), (u32*)mf, CAN_SLEEP); 2279 if (rc != 0) { 2280 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT 2281 "send_handshake FAILED! (ioc %p, mf %p)\n", 2282 ioc->name, ioc, mf)); 2283 mpt_clear_taskmgmt_in_progress_flag(ioc); 2284 rc = -ENODATA; 2285 mutex_unlock(&ioc->taskmgmt_cmds.mutex); 2286 goto done_free_mem; 2287 } 2288 } 2289 2290 } else 2291 mpt_put_msg_frame(mptctl_id, ioc, mf); 2292 2293 /* Now wait for the command to complete */ 2294 timeout = (karg.timeout > 0) ? karg.timeout : MPT_IOCTL_DEFAULT_TIMEOUT; 2295 retry_wait: 2296 timeleft = wait_for_completion_timeout(&ioc->ioctl_cmds.done, 2297 HZ*timeout); 2298 if (!(ioc->ioctl_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { 2299 rc = -ETIME; 2300 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT "%s: TIMED OUT!\n", 2301 ioc->name, __func__)); 2302 if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) { 2303 if (function == MPI_FUNCTION_SCSI_TASK_MGMT) 2304 mutex_unlock(&ioc->taskmgmt_cmds.mutex); 2305 goto done_free_mem; 2306 } 2307 if (!timeleft) { 2308 printk(MYIOC_s_WARN_FMT 2309 "mpt cmd timeout, doorbell=0x%08x" 2310 " function=0x%x\n", 2311 ioc->name, mpt_GetIocState(ioc, 0), function); 2312 if (function == MPI_FUNCTION_SCSI_TASK_MGMT) 2313 mutex_unlock(&ioc->taskmgmt_cmds.mutex); 2314 mptctl_timeout_expired(ioc, mf); 2315 mf = NULL; 2316 } else 2317 goto retry_wait; 2318 goto done_free_mem; 2319 } 2320 2321 if (function == MPI_FUNCTION_SCSI_TASK_MGMT) 2322 mutex_unlock(&ioc->taskmgmt_cmds.mutex); 2323 2324 2325 mf = NULL; 2326 2327 /* If a valid reply frame, copy to the user. 2328 * Offset 2: reply length in U32's 2329 */ 2330 if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_RF_VALID) { 2331 if (karg.maxReplyBytes < ioc->reply_sz) { 2332 sz = min(karg.maxReplyBytes, 2333 4*ioc->ioctl_cmds.reply[2]); 2334 } else { 2335 sz = min(ioc->reply_sz, 4*ioc->ioctl_cmds.reply[2]); 2336 } 2337 if (sz > 0) { 2338 if (copy_to_user(karg.replyFrameBufPtr, 2339 ioc->ioctl_cmds.reply, sz)){ 2340 printk(MYIOC_s_ERR_FMT 2341 "%s@%d::mptctl_do_mpt_command - " 2342 "Unable to write out reply frame %p\n", 2343 ioc->name, __FILE__, __LINE__, karg.replyFrameBufPtr); 2344 rc = -ENODATA; 2345 goto done_free_mem; 2346 } 2347 } 2348 } 2349 2350 /* If valid sense data, copy to user. 2351 */ 2352 if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_SENSE_VALID) { 2353 sz = min(karg.maxSenseBytes, MPT_SENSE_BUFFER_SIZE); 2354 if (sz > 0) { 2355 if (copy_to_user(karg.senseDataPtr, 2356 ioc->ioctl_cmds.sense, sz)) { 2357 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - " 2358 "Unable to write sense data to user %p\n", 2359 ioc->name, __FILE__, __LINE__, 2360 karg.senseDataPtr); 2361 rc = -ENODATA; 2362 goto done_free_mem; 2363 } 2364 } 2365 } 2366 2367 /* If the overall status is _GOOD and data in, copy data 2368 * to user. 2369 */ 2370 if ((ioc->ioctl_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD) && 2371 (karg.dataInSize > 0) && (bufIn.kptr)) { 2372 2373 if (copy_to_user(karg.dataInBufPtr, 2374 bufIn.kptr, karg.dataInSize)) { 2375 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - " 2376 "Unable to write data to user %p\n", 2377 ioc->name, __FILE__, __LINE__, 2378 karg.dataInBufPtr); 2379 rc = -ENODATA; 2380 } 2381 } 2382 2383 done_free_mem: 2384 2385 CLEAR_MGMT_STATUS(ioc->ioctl_cmds.status) 2386 SET_MGMT_MSG_CONTEXT(ioc->ioctl_cmds.msg_context, 0); 2387 2388 /* Free the allocated memory. 2389 */ 2390 if (bufOut.kptr != NULL) { 2391 pci_free_consistent(ioc->pcidev, 2392 bufOut.len, (void *) bufOut.kptr, dma_addr_out); 2393 } 2394 2395 if (bufIn.kptr != NULL) { 2396 pci_free_consistent(ioc->pcidev, 2397 bufIn.len, (void *) bufIn.kptr, dma_addr_in); 2398 } 2399 2400 /* mf is null if command issued successfully 2401 * otherwise, failure occurred after mf acquired. 2402 */ 2403 if (mf) 2404 mpt_free_msg_frame(ioc, mf); 2405 2406 return rc; 2407 } 2408 2409 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2410 /* Prototype Routine for the HOST INFO command. 2411 * 2412 * Outputs: None. 2413 * Return: 0 if successful 2414 * -EFAULT if data unavailable 2415 * -EBUSY if previous command timeout and IOC reset is not complete. 2416 * -ENODEV if no such device/adapter 2417 * -ETIME if timer expires 2418 * -ENOMEM if memory allocation error 2419 */ 2420 static int 2421 mptctl_hp_hostinfo(unsigned long arg, unsigned int data_size) 2422 { 2423 hp_host_info_t __user *uarg = (void __user *) arg; 2424 MPT_ADAPTER *ioc; 2425 struct pci_dev *pdev; 2426 char *pbuf=NULL; 2427 dma_addr_t buf_dma; 2428 hp_host_info_t karg; 2429 CONFIGPARMS cfg; 2430 ConfigPageHeader_t hdr; 2431 int iocnum; 2432 int rc, cim_rev; 2433 ToolboxIstwiReadWriteRequest_t *IstwiRWRequest; 2434 MPT_FRAME_HDR *mf = NULL; 2435 unsigned long timeleft; 2436 int retval; 2437 u32 msgcontext; 2438 2439 /* Reset long to int. Should affect IA64 and SPARC only 2440 */ 2441 if (data_size == sizeof(hp_host_info_t)) 2442 cim_rev = 1; 2443 else if (data_size == sizeof(hp_host_info_rev0_t)) 2444 cim_rev = 0; /* obsolete */ 2445 else 2446 return -EFAULT; 2447 2448 if (copy_from_user(&karg, uarg, sizeof(hp_host_info_t))) { 2449 printk(KERN_ERR MYNAM "%s@%d::mptctl_hp_host_info - " 2450 "Unable to read in hp_host_info struct @ %p\n", 2451 __FILE__, __LINE__, uarg); 2452 return -EFAULT; 2453 } 2454 2455 if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || 2456 (ioc == NULL)) { 2457 printk(KERN_DEBUG MYNAM "%s::mptctl_hp_hostinfo() @%d - ioc%d not found!\n", 2458 __FILE__, __LINE__, iocnum); 2459 return -ENODEV; 2460 } 2461 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": mptctl_hp_hostinfo called.\n", 2462 ioc->name)); 2463 2464 /* Fill in the data and return the structure to the calling 2465 * program 2466 */ 2467 pdev = (struct pci_dev *) ioc->pcidev; 2468 2469 karg.vendor = pdev->vendor; 2470 karg.device = pdev->device; 2471 karg.subsystem_id = pdev->subsystem_device; 2472 karg.subsystem_vendor = pdev->subsystem_vendor; 2473 karg.devfn = pdev->devfn; 2474 karg.bus = pdev->bus->number; 2475 2476 /* Save the SCSI host no. if 2477 * SCSI driver loaded 2478 */ 2479 if (ioc->sh != NULL) 2480 karg.host_no = ioc->sh->host_no; 2481 else 2482 karg.host_no = -1; 2483 2484 /* Reformat the fw_version into a string */ 2485 snprintf(karg.fw_version, sizeof(karg.fw_version), 2486 "%.2hhu.%.2hhu.%.2hhu.%.2hhu", 2487 ioc->facts.FWVersion.Struct.Major, 2488 ioc->facts.FWVersion.Struct.Minor, 2489 ioc->facts.FWVersion.Struct.Unit, 2490 ioc->facts.FWVersion.Struct.Dev); 2491 2492 /* Issue a config request to get the device serial number 2493 */ 2494 hdr.PageVersion = 0; 2495 hdr.PageLength = 0; 2496 hdr.PageNumber = 0; 2497 hdr.PageType = MPI_CONFIG_PAGETYPE_MANUFACTURING; 2498 cfg.cfghdr.hdr = &hdr; 2499 cfg.physAddr = -1; 2500 cfg.pageAddr = 0; 2501 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 2502 cfg.dir = 0; /* read */ 2503 cfg.timeout = 10; 2504 2505 strncpy(karg.serial_number, " ", 24); 2506 if (mpt_config(ioc, &cfg) == 0) { 2507 if (cfg.cfghdr.hdr->PageLength > 0) { 2508 /* Issue the second config page request */ 2509 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 2510 2511 pbuf = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, &buf_dma); 2512 if (pbuf) { 2513 cfg.physAddr = buf_dma; 2514 if (mpt_config(ioc, &cfg) == 0) { 2515 ManufacturingPage0_t *pdata = (ManufacturingPage0_t *) pbuf; 2516 if (strlen(pdata->BoardTracerNumber) > 1) { 2517 strlcpy(karg.serial_number, 2518 pdata->BoardTracerNumber, 24); 2519 } 2520 } 2521 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, pbuf, buf_dma); 2522 pbuf = NULL; 2523 } 2524 } 2525 } 2526 rc = mpt_GetIocState(ioc, 1); 2527 switch (rc) { 2528 case MPI_IOC_STATE_OPERATIONAL: 2529 karg.ioc_status = HP_STATUS_OK; 2530 break; 2531 2532 case MPI_IOC_STATE_FAULT: 2533 karg.ioc_status = HP_STATUS_FAILED; 2534 break; 2535 2536 case MPI_IOC_STATE_RESET: 2537 case MPI_IOC_STATE_READY: 2538 default: 2539 karg.ioc_status = HP_STATUS_OTHER; 2540 break; 2541 } 2542 2543 karg.base_io_addr = pci_resource_start(pdev, 0); 2544 2545 if ((ioc->bus_type == SAS) || (ioc->bus_type == FC)) 2546 karg.bus_phys_width = HP_BUS_WIDTH_UNK; 2547 else 2548 karg.bus_phys_width = HP_BUS_WIDTH_16; 2549 2550 karg.hard_resets = 0; 2551 karg.soft_resets = 0; 2552 karg.timeouts = 0; 2553 if (ioc->sh != NULL) { 2554 MPT_SCSI_HOST *hd = shost_priv(ioc->sh); 2555 2556 if (hd && (cim_rev == 1)) { 2557 karg.hard_resets = ioc->hard_resets; 2558 karg.soft_resets = ioc->soft_resets; 2559 karg.timeouts = ioc->timeouts; 2560 } 2561 } 2562 2563 /* 2564 * Gather ISTWI(Industry Standard Two Wire Interface) Data 2565 */ 2566 if ((mf = mpt_get_msg_frame(mptctl_id, ioc)) == NULL) { 2567 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT 2568 "%s, no msg frames!!\n", ioc->name, __func__)); 2569 goto out; 2570 } 2571 2572 IstwiRWRequest = (ToolboxIstwiReadWriteRequest_t *)mf; 2573 msgcontext = IstwiRWRequest->MsgContext; 2574 memset(IstwiRWRequest,0,sizeof(ToolboxIstwiReadWriteRequest_t)); 2575 IstwiRWRequest->MsgContext = msgcontext; 2576 IstwiRWRequest->Function = MPI_FUNCTION_TOOLBOX; 2577 IstwiRWRequest->Tool = MPI_TOOLBOX_ISTWI_READ_WRITE_TOOL; 2578 IstwiRWRequest->Flags = MPI_TB_ISTWI_FLAGS_READ; 2579 IstwiRWRequest->NumAddressBytes = 0x01; 2580 IstwiRWRequest->DataLength = cpu_to_le16(0x04); 2581 if (pdev->devfn & 1) 2582 IstwiRWRequest->DeviceAddr = 0xB2; 2583 else 2584 IstwiRWRequest->DeviceAddr = 0xB0; 2585 2586 pbuf = pci_alloc_consistent(ioc->pcidev, 4, &buf_dma); 2587 if (!pbuf) 2588 goto out; 2589 ioc->add_sge((char *)&IstwiRWRequest->SGL, 2590 (MPT_SGE_FLAGS_SSIMPLE_READ|4), buf_dma); 2591 2592 retval = 0; 2593 SET_MGMT_MSG_CONTEXT(ioc->ioctl_cmds.msg_context, 2594 IstwiRWRequest->MsgContext); 2595 INITIALIZE_MGMT_STATUS(ioc->ioctl_cmds.status) 2596 mpt_put_msg_frame(mptctl_id, ioc, mf); 2597 2598 retry_wait: 2599 timeleft = wait_for_completion_timeout(&ioc->ioctl_cmds.done, 2600 HZ*MPT_IOCTL_DEFAULT_TIMEOUT); 2601 if (!(ioc->ioctl_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { 2602 retval = -ETIME; 2603 printk(MYIOC_s_WARN_FMT "%s: failed\n", ioc->name, __func__); 2604 if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) { 2605 mpt_free_msg_frame(ioc, mf); 2606 goto out; 2607 } 2608 if (!timeleft) { 2609 printk(MYIOC_s_WARN_FMT 2610 "HOST INFO command timeout, doorbell=0x%08x\n", 2611 ioc->name, mpt_GetIocState(ioc, 0)); 2612 mptctl_timeout_expired(ioc, mf); 2613 } else 2614 goto retry_wait; 2615 goto out; 2616 } 2617 2618 /* 2619 *ISTWI Data Definition 2620 * pbuf[0] = FW_VERSION = 0x4 2621 * pbuf[1] = Bay Count = 6 or 4 or 2, depending on 2622 * the config, you should be seeing one out of these three values 2623 * pbuf[2] = Drive Installed Map = bit pattern depend on which 2624 * bays have drives in them 2625 * pbuf[3] = Checksum (0x100 = (byte0 + byte2 + byte3) 2626 */ 2627 if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_RF_VALID) 2628 karg.rsvd = *(u32 *)pbuf; 2629 2630 out: 2631 CLEAR_MGMT_STATUS(ioc->ioctl_cmds.status) 2632 SET_MGMT_MSG_CONTEXT(ioc->ioctl_cmds.msg_context, 0); 2633 2634 if (pbuf) 2635 pci_free_consistent(ioc->pcidev, 4, pbuf, buf_dma); 2636 2637 /* Copy the data from kernel memory to user memory 2638 */ 2639 if (copy_to_user((char __user *)arg, &karg, sizeof(hp_host_info_t))) { 2640 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_hpgethostinfo - " 2641 "Unable to write out hp_host_info @ %p\n", 2642 ioc->name, __FILE__, __LINE__, uarg); 2643 return -EFAULT; 2644 } 2645 2646 return 0; 2647 2648 } 2649 2650 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2651 /* Prototype Routine for the TARGET INFO command. 2652 * 2653 * Outputs: None. 2654 * Return: 0 if successful 2655 * -EFAULT if data unavailable 2656 * -EBUSY if previous command timeout and IOC reset is not complete. 2657 * -ENODEV if no such device/adapter 2658 * -ETIME if timer expires 2659 * -ENOMEM if memory allocation error 2660 */ 2661 static int 2662 mptctl_hp_targetinfo(unsigned long arg) 2663 { 2664 hp_target_info_t __user *uarg = (void __user *) arg; 2665 SCSIDevicePage0_t *pg0_alloc; 2666 SCSIDevicePage3_t *pg3_alloc; 2667 MPT_ADAPTER *ioc; 2668 MPT_SCSI_HOST *hd = NULL; 2669 hp_target_info_t karg; 2670 int iocnum; 2671 int data_sz; 2672 dma_addr_t page_dma; 2673 CONFIGPARMS cfg; 2674 ConfigPageHeader_t hdr; 2675 int tmp, np, rc = 0; 2676 2677 if (copy_from_user(&karg, uarg, sizeof(hp_target_info_t))) { 2678 printk(KERN_ERR MYNAM "%s@%d::mptctl_hp_targetinfo - " 2679 "Unable to read in hp_host_targetinfo struct @ %p\n", 2680 __FILE__, __LINE__, uarg); 2681 return -EFAULT; 2682 } 2683 2684 if (((iocnum = mpt_verify_adapter(karg.hdr.iocnum, &ioc)) < 0) || 2685 (ioc == NULL)) { 2686 printk(KERN_DEBUG MYNAM "%s::mptctl_hp_targetinfo() @%d - ioc%d not found!\n", 2687 __FILE__, __LINE__, iocnum); 2688 return -ENODEV; 2689 } 2690 if (karg.hdr.id >= MPT_MAX_FC_DEVICES) 2691 return -EINVAL; 2692 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_hp_targetinfo called.\n", 2693 ioc->name)); 2694 2695 /* There is nothing to do for FCP parts. 2696 */ 2697 if ((ioc->bus_type == SAS) || (ioc->bus_type == FC)) 2698 return 0; 2699 2700 if ((ioc->spi_data.sdp0length == 0) || (ioc->sh == NULL)) 2701 return 0; 2702 2703 if (ioc->sh->host_no != karg.hdr.host) 2704 return -ENODEV; 2705 2706 /* Get the data transfer speeds 2707 */ 2708 data_sz = ioc->spi_data.sdp0length * 4; 2709 pg0_alloc = (SCSIDevicePage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page_dma); 2710 if (pg0_alloc) { 2711 hdr.PageVersion = ioc->spi_data.sdp0version; 2712 hdr.PageLength = data_sz; 2713 hdr.PageNumber = 0; 2714 hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; 2715 2716 cfg.cfghdr.hdr = &hdr; 2717 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 2718 cfg.dir = 0; 2719 cfg.timeout = 0; 2720 cfg.physAddr = page_dma; 2721 2722 cfg.pageAddr = (karg.hdr.channel << 8) | karg.hdr.id; 2723 2724 if ((rc = mpt_config(ioc, &cfg)) == 0) { 2725 np = le32_to_cpu(pg0_alloc->NegotiatedParameters); 2726 karg.negotiated_width = np & MPI_SCSIDEVPAGE0_NP_WIDE ? 2727 HP_BUS_WIDTH_16 : HP_BUS_WIDTH_8; 2728 2729 if (np & MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK) { 2730 tmp = (np & MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK) >> 8; 2731 if (tmp < 0x09) 2732 karg.negotiated_speed = HP_DEV_SPEED_ULTRA320; 2733 else if (tmp <= 0x09) 2734 karg.negotiated_speed = HP_DEV_SPEED_ULTRA160; 2735 else if (tmp <= 0x0A) 2736 karg.negotiated_speed = HP_DEV_SPEED_ULTRA2; 2737 else if (tmp <= 0x0C) 2738 karg.negotiated_speed = HP_DEV_SPEED_ULTRA; 2739 else if (tmp <= 0x25) 2740 karg.negotiated_speed = HP_DEV_SPEED_FAST; 2741 else 2742 karg.negotiated_speed = HP_DEV_SPEED_ASYNC; 2743 } else 2744 karg.negotiated_speed = HP_DEV_SPEED_ASYNC; 2745 } 2746 2747 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) pg0_alloc, page_dma); 2748 } 2749 2750 /* Set defaults 2751 */ 2752 karg.message_rejects = -1; 2753 karg.phase_errors = -1; 2754 karg.parity_errors = -1; 2755 karg.select_timeouts = -1; 2756 2757 /* Get the target error parameters 2758 */ 2759 hdr.PageVersion = 0; 2760 hdr.PageLength = 0; 2761 hdr.PageNumber = 3; 2762 hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; 2763 2764 cfg.cfghdr.hdr = &hdr; 2765 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 2766 cfg.dir = 0; 2767 cfg.timeout = 0; 2768 cfg.physAddr = -1; 2769 if ((mpt_config(ioc, &cfg) == 0) && (cfg.cfghdr.hdr->PageLength > 0)) { 2770 /* Issue the second config page request */ 2771 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 2772 data_sz = (int) cfg.cfghdr.hdr->PageLength * 4; 2773 pg3_alloc = (SCSIDevicePage3_t *) pci_alloc_consistent( 2774 ioc->pcidev, data_sz, &page_dma); 2775 if (pg3_alloc) { 2776 cfg.physAddr = page_dma; 2777 cfg.pageAddr = (karg.hdr.channel << 8) | karg.hdr.id; 2778 if ((rc = mpt_config(ioc, &cfg)) == 0) { 2779 karg.message_rejects = (u32) le16_to_cpu(pg3_alloc->MsgRejectCount); 2780 karg.phase_errors = (u32) le16_to_cpu(pg3_alloc->PhaseErrorCount); 2781 karg.parity_errors = (u32) le16_to_cpu(pg3_alloc->ParityErrorCount); 2782 } 2783 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) pg3_alloc, page_dma); 2784 } 2785 } 2786 hd = shost_priv(ioc->sh); 2787 if (hd != NULL) 2788 karg.select_timeouts = hd->sel_timeout[karg.hdr.id]; 2789 2790 /* Copy the data from kernel memory to user memory 2791 */ 2792 if (copy_to_user((char __user *)arg, &karg, sizeof(hp_target_info_t))) { 2793 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_hp_target_info - " 2794 "Unable to write out mpt_ioctl_targetinfo struct @ %p\n", 2795 ioc->name, __FILE__, __LINE__, uarg); 2796 return -EFAULT; 2797 } 2798 2799 return 0; 2800 } 2801 2802 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2803 2804 static const struct file_operations mptctl_fops = { 2805 .owner = THIS_MODULE, 2806 .llseek = no_llseek, 2807 .fasync = mptctl_fasync, 2808 .unlocked_ioctl = mptctl_ioctl, 2809 #ifdef CONFIG_COMPAT 2810 .compat_ioctl = compat_mpctl_ioctl, 2811 #endif 2812 }; 2813 2814 static struct miscdevice mptctl_miscdev = { 2815 MPT_MINOR, 2816 MYNAM, 2817 &mptctl_fops 2818 }; 2819 2820 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2821 2822 #ifdef CONFIG_COMPAT 2823 2824 static int 2825 compat_mptfwxfer_ioctl(struct file *filp, unsigned int cmd, 2826 unsigned long arg) 2827 { 2828 struct mpt_fw_xfer32 kfw32; 2829 struct mpt_fw_xfer kfw; 2830 MPT_ADAPTER *iocp = NULL; 2831 int iocnum, iocnumX; 2832 int nonblock = (filp->f_flags & O_NONBLOCK); 2833 int ret; 2834 2835 2836 if (copy_from_user(&kfw32, (char __user *)arg, sizeof(kfw32))) 2837 return -EFAULT; 2838 2839 /* Verify intended MPT adapter */ 2840 iocnumX = kfw32.iocnum & 0xFF; 2841 if (((iocnum = mpt_verify_adapter(iocnumX, &iocp)) < 0) || 2842 (iocp == NULL)) { 2843 printk(KERN_DEBUG MYNAM "::compat_mptfwxfer_ioctl @%d - ioc%d not found!\n", 2844 __LINE__, iocnumX); 2845 return -ENODEV; 2846 } 2847 2848 if ((ret = mptctl_syscall_down(iocp, nonblock)) != 0) 2849 return ret; 2850 2851 dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "compat_mptfwxfer_ioctl() called\n", 2852 iocp->name)); 2853 kfw.iocnum = iocnum; 2854 kfw.fwlen = kfw32.fwlen; 2855 kfw.bufp = compat_ptr(kfw32.bufp); 2856 2857 ret = mptctl_do_fw_download(kfw.iocnum, kfw.bufp, kfw.fwlen); 2858 2859 mutex_unlock(&iocp->ioctl_cmds.mutex); 2860 2861 return ret; 2862 } 2863 2864 static int 2865 compat_mpt_command(struct file *filp, unsigned int cmd, 2866 unsigned long arg) 2867 { 2868 struct mpt_ioctl_command32 karg32; 2869 struct mpt_ioctl_command32 __user *uarg = (struct mpt_ioctl_command32 __user *) arg; 2870 struct mpt_ioctl_command karg; 2871 MPT_ADAPTER *iocp = NULL; 2872 int iocnum, iocnumX; 2873 int nonblock = (filp->f_flags & O_NONBLOCK); 2874 int ret; 2875 2876 if (copy_from_user(&karg32, (char __user *)arg, sizeof(karg32))) 2877 return -EFAULT; 2878 2879 /* Verify intended MPT adapter */ 2880 iocnumX = karg32.hdr.iocnum & 0xFF; 2881 if (((iocnum = mpt_verify_adapter(iocnumX, &iocp)) < 0) || 2882 (iocp == NULL)) { 2883 printk(KERN_DEBUG MYNAM "::compat_mpt_command @%d - ioc%d not found!\n", 2884 __LINE__, iocnumX); 2885 return -ENODEV; 2886 } 2887 2888 if ((ret = mptctl_syscall_down(iocp, nonblock)) != 0) 2889 return ret; 2890 2891 dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "compat_mpt_command() called\n", 2892 iocp->name)); 2893 /* Copy data to karg */ 2894 karg.hdr.iocnum = karg32.hdr.iocnum; 2895 karg.hdr.port = karg32.hdr.port; 2896 karg.timeout = karg32.timeout; 2897 karg.maxReplyBytes = karg32.maxReplyBytes; 2898 2899 karg.dataInSize = karg32.dataInSize; 2900 karg.dataOutSize = karg32.dataOutSize; 2901 karg.maxSenseBytes = karg32.maxSenseBytes; 2902 karg.dataSgeOffset = karg32.dataSgeOffset; 2903 2904 karg.replyFrameBufPtr = (char __user *)(unsigned long)karg32.replyFrameBufPtr; 2905 karg.dataInBufPtr = (char __user *)(unsigned long)karg32.dataInBufPtr; 2906 karg.dataOutBufPtr = (char __user *)(unsigned long)karg32.dataOutBufPtr; 2907 karg.senseDataPtr = (char __user *)(unsigned long)karg32.senseDataPtr; 2908 2909 /* Pass new structure to do_mpt_command 2910 */ 2911 ret = mptctl_do_mpt_command (karg, &uarg->MF); 2912 2913 mutex_unlock(&iocp->ioctl_cmds.mutex); 2914 2915 return ret; 2916 } 2917 2918 static long compat_mpctl_ioctl(struct file *f, unsigned int cmd, unsigned long arg) 2919 { 2920 long ret; 2921 mutex_lock(&mpctl_mutex); 2922 switch (cmd) { 2923 case MPTIOCINFO: 2924 case MPTIOCINFO1: 2925 case MPTIOCINFO2: 2926 case MPTTARGETINFO: 2927 case MPTEVENTQUERY: 2928 case MPTEVENTENABLE: 2929 case MPTEVENTREPORT: 2930 case MPTHARDRESET: 2931 case HP_GETHOSTINFO: 2932 case HP_GETTARGETINFO: 2933 case MPTTEST: 2934 ret = __mptctl_ioctl(f, cmd, arg); 2935 break; 2936 case MPTCOMMAND32: 2937 ret = compat_mpt_command(f, cmd, arg); 2938 break; 2939 case MPTFWDOWNLOAD32: 2940 ret = compat_mptfwxfer_ioctl(f, cmd, arg); 2941 break; 2942 default: 2943 ret = -ENOIOCTLCMD; 2944 break; 2945 } 2946 mutex_unlock(&mpctl_mutex); 2947 return ret; 2948 } 2949 2950 #endif 2951 2952 2953 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2954 /* 2955 * mptctl_probe - Installs ioctl devices per bus. 2956 * @pdev: Pointer to pci_dev structure 2957 * 2958 * Returns 0 for success, non-zero for failure. 2959 * 2960 */ 2961 2962 static int 2963 mptctl_probe(struct pci_dev *pdev, const struct pci_device_id *id) 2964 { 2965 MPT_ADAPTER *ioc = pci_get_drvdata(pdev); 2966 2967 mutex_init(&ioc->ioctl_cmds.mutex); 2968 init_completion(&ioc->ioctl_cmds.done); 2969 return 0; 2970 } 2971 2972 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2973 /* 2974 * mptctl_remove - Removed ioctl devices 2975 * @pdev: Pointer to pci_dev structure 2976 * 2977 * 2978 */ 2979 static void 2980 mptctl_remove(struct pci_dev *pdev) 2981 { 2982 } 2983 2984 static struct mpt_pci_driver mptctl_driver = { 2985 .probe = mptctl_probe, 2986 .remove = mptctl_remove, 2987 }; 2988 2989 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2990 static int __init mptctl_init(void) 2991 { 2992 int err; 2993 int where = 1; 2994 2995 show_mptmod_ver(my_NAME, my_VERSION); 2996 2997 mpt_device_driver_register(&mptctl_driver, MPTCTL_DRIVER); 2998 2999 /* Register this device */ 3000 err = misc_register(&mptctl_miscdev); 3001 if (err < 0) { 3002 printk(KERN_ERR MYNAM ": Can't register misc device [minor=%d].\n", MPT_MINOR); 3003 goto out_fail; 3004 } 3005 printk(KERN_INFO MYNAM ": Registered with Fusion MPT base driver\n"); 3006 printk(KERN_INFO MYNAM ": /dev/%s @ (major,minor=%d,%d)\n", 3007 mptctl_miscdev.name, MISC_MAJOR, mptctl_miscdev.minor); 3008 3009 /* 3010 * Install our handler 3011 */ 3012 ++where; 3013 mptctl_id = mpt_register(mptctl_reply, MPTCTL_DRIVER, 3014 "mptctl_reply"); 3015 if (!mptctl_id || mptctl_id >= MPT_MAX_PROTOCOL_DRIVERS) { 3016 printk(KERN_ERR MYNAM ": ERROR: Failed to register with Fusion MPT base driver\n"); 3017 misc_deregister(&mptctl_miscdev); 3018 err = -EBUSY; 3019 goto out_fail; 3020 } 3021 3022 mptctl_taskmgmt_id = mpt_register(mptctl_taskmgmt_reply, MPTCTL_DRIVER, 3023 "mptctl_taskmgmt_reply"); 3024 if (!mptctl_taskmgmt_id || mptctl_taskmgmt_id >= MPT_MAX_PROTOCOL_DRIVERS) { 3025 printk(KERN_ERR MYNAM ": ERROR: Failed to register with Fusion MPT base driver\n"); 3026 mpt_deregister(mptctl_id); 3027 misc_deregister(&mptctl_miscdev); 3028 err = -EBUSY; 3029 goto out_fail; 3030 } 3031 3032 mpt_reset_register(mptctl_id, mptctl_ioc_reset); 3033 mpt_event_register(mptctl_id, mptctl_event_process); 3034 3035 return 0; 3036 3037 out_fail: 3038 3039 mpt_device_driver_deregister(MPTCTL_DRIVER); 3040 3041 return err; 3042 } 3043 3044 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3045 static void mptctl_exit(void) 3046 { 3047 misc_deregister(&mptctl_miscdev); 3048 printk(KERN_INFO MYNAM ": Deregistered /dev/%s @ (major,minor=%d,%d)\n", 3049 mptctl_miscdev.name, MISC_MAJOR, mptctl_miscdev.minor); 3050 3051 /* De-register event handler from base module */ 3052 mpt_event_deregister(mptctl_id); 3053 3054 /* De-register reset handler from base module */ 3055 mpt_reset_deregister(mptctl_id); 3056 3057 /* De-register callback handler from base module */ 3058 mpt_deregister(mptctl_taskmgmt_id); 3059 mpt_deregister(mptctl_id); 3060 3061 mpt_device_driver_deregister(MPTCTL_DRIVER); 3062 3063 } 3064 3065 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3066 3067 module_init(mptctl_init); 3068 module_exit(mptctl_exit); 3069