1 /* 2 * linux/drivers/message/fusion/mptctl.c 3 * mpt Ioctl driver. 4 * For use with LSI PCI chip/adapters 5 * running LSI Fusion MPT (Message Passing Technology) firmware. 6 * 7 * Copyright (c) 1999-2008 LSI Corporation 8 * (mailto:DL-MPTFusionLinux@lsi.com) 9 * 10 */ 11 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 12 /* 13 This program is free software; you can redistribute it and/or modify 14 it under the terms of the GNU General Public License as published by 15 the Free Software Foundation; version 2 of the License. 16 17 This program is distributed in the hope that it will be useful, 18 but WITHOUT ANY WARRANTY; without even the implied warranty of 19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 20 GNU General Public License for more details. 21 22 NO WARRANTY 23 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR 24 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT 25 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, 26 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is 27 solely responsible for determining the appropriateness of using and 28 distributing the Program and assumes all risks associated with its 29 exercise of rights under this Agreement, including but not limited to 30 the risks and costs of program errors, damage to or loss of data, 31 programs or equipment, and unavailability or interruption of operations. 32 33 DISCLAIMER OF LIABILITY 34 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY 35 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND 37 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR 38 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE 39 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED 40 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES 41 42 You should have received a copy of the GNU General Public License 43 along with this program; if not, write to the Free Software 44 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 45 */ 46 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 47 48 #include <linux/kernel.h> 49 #include <linux/module.h> 50 #include <linux/errno.h> 51 #include <linux/init.h> 52 #include <linux/slab.h> 53 #include <linux/types.h> 54 #include <linux/pci.h> 55 #include <linux/delay.h> /* for mdelay */ 56 #include <linux/miscdevice.h> 57 #include <linux/mutex.h> 58 #include <linux/compat.h> 59 60 #include <asm/io.h> 61 #include <linux/uaccess.h> 62 63 #include <scsi/scsi.h> 64 #include <scsi/scsi_cmnd.h> 65 #include <scsi/scsi_device.h> 66 #include <scsi/scsi_host.h> 67 #include <scsi/scsi_tcq.h> 68 69 #define COPYRIGHT "Copyright (c) 1999-2008 LSI Corporation" 70 #define MODULEAUTHOR "LSI Corporation" 71 #include "mptbase.h" 72 #include "mptctl.h" 73 74 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 75 #define my_NAME "Fusion MPT misc device (ioctl) driver" 76 #define my_VERSION MPT_LINUX_VERSION_COMMON 77 #define MYNAM "mptctl" 78 79 MODULE_AUTHOR(MODULEAUTHOR); 80 MODULE_DESCRIPTION(my_NAME); 81 MODULE_LICENSE("GPL"); 82 MODULE_VERSION(my_VERSION); 83 84 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 85 86 static DEFINE_MUTEX(mpctl_mutex); 87 static u8 mptctl_id = MPT_MAX_PROTOCOL_DRIVERS; 88 static u8 mptctl_taskmgmt_id = MPT_MAX_PROTOCOL_DRIVERS; 89 90 static DECLARE_WAIT_QUEUE_HEAD ( mptctl_wait ); 91 92 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 93 94 struct buflist { 95 u8 *kptr; 96 int len; 97 }; 98 99 /* 100 * Function prototypes. Called from OS entry point mptctl_ioctl. 101 * arg contents specific to function. 102 */ 103 static int mptctl_fw_download(MPT_ADAPTER *iocp, unsigned long arg); 104 static int mptctl_getiocinfo(MPT_ADAPTER *iocp, unsigned long arg, unsigned int cmd); 105 static int mptctl_gettargetinfo(MPT_ADAPTER *iocp, unsigned long arg); 106 static int mptctl_readtest(MPT_ADAPTER *iocp, unsigned long arg); 107 static int mptctl_mpt_command(MPT_ADAPTER *iocp, unsigned long arg); 108 static int mptctl_eventquery(MPT_ADAPTER *iocp, unsigned long arg); 109 static int mptctl_eventenable(MPT_ADAPTER *iocp, unsigned long arg); 110 static int mptctl_eventreport(MPT_ADAPTER *iocp, unsigned long arg); 111 static int mptctl_replace_fw(MPT_ADAPTER *iocp, unsigned long arg); 112 113 static int mptctl_do_reset(MPT_ADAPTER *iocp, unsigned long arg); 114 static int mptctl_hp_hostinfo(MPT_ADAPTER *iocp, unsigned long arg, unsigned int cmd); 115 static int mptctl_hp_targetinfo(MPT_ADAPTER *iocp, unsigned long arg); 116 117 static int mptctl_probe(struct pci_dev *, const struct pci_device_id *); 118 static void mptctl_remove(struct pci_dev *); 119 120 #ifdef CONFIG_COMPAT 121 static long compat_mpctl_ioctl(struct file *f, unsigned cmd, unsigned long arg); 122 #endif 123 /* 124 * Private function calls. 125 */ 126 static int mptctl_do_mpt_command(MPT_ADAPTER *iocp, struct mpt_ioctl_command karg, void __user *mfPtr); 127 static int mptctl_do_fw_download(MPT_ADAPTER *iocp, char __user *ufwbuf, size_t fwlen); 128 static MptSge_t *kbuf_alloc_2_sgl(int bytes, u32 dir, int sge_offset, int *frags, 129 struct buflist **blp, dma_addr_t *sglbuf_dma, MPT_ADAPTER *ioc); 130 static void kfree_sgl(MptSge_t *sgl, dma_addr_t sgl_dma, 131 struct buflist *buflist, MPT_ADAPTER *ioc); 132 133 /* 134 * Reset Handler cleanup function 135 */ 136 static int mptctl_ioc_reset(MPT_ADAPTER *ioc, int reset_phase); 137 138 /* 139 * Event Handler function 140 */ 141 static int mptctl_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply); 142 static struct fasync_struct *async_queue=NULL; 143 144 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 145 /* 146 * Scatter gather list (SGL) sizes and limits... 147 */ 148 //#define MAX_SCSI_FRAGS 9 149 #define MAX_FRAGS_SPILL1 9 150 #define MAX_FRAGS_SPILL2 15 151 #define FRAGS_PER_BUCKET (MAX_FRAGS_SPILL2 + 1) 152 153 //#define MAX_CHAIN_FRAGS 64 154 //#define MAX_CHAIN_FRAGS (15+15+15+16) 155 #define MAX_CHAIN_FRAGS (4 * MAX_FRAGS_SPILL2 + 1) 156 157 // Define max sg LIST bytes ( == (#frags + #chains) * 8 bytes each) 158 // Works out to: 592d bytes! (9+1)*8 + 4*(15+1)*8 159 // ^----------------- 80 + 512 160 #define MAX_SGL_BYTES ((MAX_FRAGS_SPILL1 + 1 + (4 * FRAGS_PER_BUCKET)) * 8) 161 162 /* linux only seems to ever give 128kB MAX contiguous (GFP_USER) mem bytes */ 163 #define MAX_KMALLOC_SZ (128*1024) 164 165 #define MPT_IOCTL_DEFAULT_TIMEOUT 10 /* Default timeout value (seconds) */ 166 167 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 168 /** 169 * mptctl_syscall_down - Down the MPT adapter syscall semaphore. 170 * @ioc: Pointer to MPT adapter 171 * @nonblock: boolean, non-zero if O_NONBLOCK is set 172 * 173 * All of the ioctl commands can potentially sleep, which is illegal 174 * with a spinlock held, thus we perform mutual exclusion here. 175 * 176 * Returns negative errno on error, or zero for success. 177 */ 178 static inline int 179 mptctl_syscall_down(MPT_ADAPTER *ioc, int nonblock) 180 { 181 int rc = 0; 182 183 if (nonblock) { 184 if (!mutex_trylock(&ioc->ioctl_cmds.mutex)) 185 rc = -EAGAIN; 186 } else { 187 if (mutex_lock_interruptible(&ioc->ioctl_cmds.mutex)) 188 rc = -ERESTARTSYS; 189 } 190 return rc; 191 } 192 193 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 194 /* 195 * This is the callback for any message we have posted. The message itself 196 * will be returned to the message pool when we return from the IRQ 197 * 198 * This runs in irq context so be short and sweet. 199 */ 200 static int 201 mptctl_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply) 202 { 203 char *sense_data; 204 int req_index; 205 int sz; 206 207 if (!req) 208 return 0; 209 210 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "completing mpi function " 211 "(0x%02X), req=%p, reply=%p\n", ioc->name, req->u.hdr.Function, 212 req, reply)); 213 214 /* 215 * Handling continuation of the same reply. Processing the first 216 * reply, and eating the other replys that come later. 217 */ 218 if (ioc->ioctl_cmds.msg_context != req->u.hdr.MsgContext) 219 goto out_continuation; 220 221 ioc->ioctl_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD; 222 223 if (!reply) 224 goto out; 225 226 ioc->ioctl_cmds.status |= MPT_MGMT_STATUS_RF_VALID; 227 sz = min(ioc->reply_sz, 4*reply->u.reply.MsgLength); 228 memcpy(ioc->ioctl_cmds.reply, reply, sz); 229 230 if (reply->u.reply.IOCStatus || reply->u.reply.IOCLogInfo) 231 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 232 "iocstatus (0x%04X), loginfo (0x%08X)\n", ioc->name, 233 le16_to_cpu(reply->u.reply.IOCStatus), 234 le32_to_cpu(reply->u.reply.IOCLogInfo))); 235 236 if ((req->u.hdr.Function == MPI_FUNCTION_SCSI_IO_REQUEST) || 237 (req->u.hdr.Function == 238 MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) { 239 240 if (reply->u.sreply.SCSIStatus || reply->u.sreply.SCSIState) 241 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 242 "scsi_status (0x%02x), scsi_state (0x%02x), " 243 "tag = (0x%04x), transfer_count (0x%08x)\n", ioc->name, 244 reply->u.sreply.SCSIStatus, 245 reply->u.sreply.SCSIState, 246 le16_to_cpu(reply->u.sreply.TaskTag), 247 le32_to_cpu(reply->u.sreply.TransferCount))); 248 249 if (reply->u.sreply.SCSIState & 250 MPI_SCSI_STATE_AUTOSENSE_VALID) { 251 sz = req->u.scsireq.SenseBufferLength; 252 req_index = 253 le16_to_cpu(req->u.frame.hwhdr.msgctxu.fld.req_idx); 254 sense_data = ((u8 *)ioc->sense_buf_pool + 255 (req_index * MPT_SENSE_BUFFER_ALLOC)); 256 memcpy(ioc->ioctl_cmds.sense, sense_data, sz); 257 ioc->ioctl_cmds.status |= MPT_MGMT_STATUS_SENSE_VALID; 258 } 259 } 260 261 out: 262 /* We are done, issue wake up 263 */ 264 if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_PENDING) { 265 if (req->u.hdr.Function == MPI_FUNCTION_SCSI_TASK_MGMT) { 266 mpt_clear_taskmgmt_in_progress_flag(ioc); 267 ioc->ioctl_cmds.status &= ~MPT_MGMT_STATUS_PENDING; 268 complete(&ioc->ioctl_cmds.done); 269 if (ioc->bus_type == SAS) 270 ioc->schedule_target_reset(ioc); 271 } else { 272 ioc->ioctl_cmds.status &= ~MPT_MGMT_STATUS_PENDING; 273 complete(&ioc->ioctl_cmds.done); 274 } 275 } 276 277 out_continuation: 278 if (reply && (reply->u.reply.MsgFlags & 279 MPI_MSGFLAGS_CONTINUATION_REPLY)) 280 return 0; 281 return 1; 282 } 283 284 285 static int 286 mptctl_taskmgmt_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) 287 { 288 if (!mf) 289 return 0; 290 291 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 292 "TaskMgmt completed (mf=%p, mr=%p)\n", 293 ioc->name, mf, mr)); 294 295 ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD; 296 297 if (!mr) 298 goto out; 299 300 ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_RF_VALID; 301 memcpy(ioc->taskmgmt_cmds.reply, mr, 302 min(MPT_DEFAULT_FRAME_SIZE, 4 * mr->u.reply.MsgLength)); 303 out: 304 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) { 305 mpt_clear_taskmgmt_in_progress_flag(ioc); 306 ioc->taskmgmt_cmds.status &= ~MPT_MGMT_STATUS_PENDING; 307 complete(&ioc->taskmgmt_cmds.done); 308 if (ioc->bus_type == SAS) 309 ioc->schedule_target_reset(ioc); 310 return 1; 311 } 312 return 0; 313 } 314 315 static int 316 mptctl_do_taskmgmt(MPT_ADAPTER *ioc, u8 tm_type, u8 bus_id, u8 target_id) 317 { 318 MPT_FRAME_HDR *mf; 319 SCSITaskMgmt_t *pScsiTm; 320 SCSITaskMgmtReply_t *pScsiTmReply; 321 int ii; 322 int retval; 323 unsigned long timeout; 324 unsigned long time_count; 325 u16 iocstatus; 326 327 328 mutex_lock(&ioc->taskmgmt_cmds.mutex); 329 if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) { 330 mutex_unlock(&ioc->taskmgmt_cmds.mutex); 331 return -EPERM; 332 } 333 334 retval = 0; 335 336 mf = mpt_get_msg_frame(mptctl_taskmgmt_id, ioc); 337 if (mf == NULL) { 338 dtmprintk(ioc, 339 printk(MYIOC_s_WARN_FMT "TaskMgmt, no msg frames!!\n", 340 ioc->name)); 341 mpt_clear_taskmgmt_in_progress_flag(ioc); 342 retval = -ENOMEM; 343 goto tm_done; 344 } 345 346 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request (mf=%p)\n", 347 ioc->name, mf)); 348 349 pScsiTm = (SCSITaskMgmt_t *) mf; 350 memset(pScsiTm, 0, sizeof(SCSITaskMgmt_t)); 351 pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT; 352 pScsiTm->TaskType = tm_type; 353 if ((tm_type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS) && 354 (ioc->bus_type == FC)) 355 pScsiTm->MsgFlags = 356 MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION; 357 pScsiTm->TargetID = target_id; 358 pScsiTm->Bus = bus_id; 359 pScsiTm->ChainOffset = 0; 360 pScsiTm->Reserved = 0; 361 pScsiTm->Reserved1 = 0; 362 pScsiTm->TaskMsgContext = 0; 363 for (ii= 0; ii < 8; ii++) 364 pScsiTm->LUN[ii] = 0; 365 for (ii=0; ii < 7; ii++) 366 pScsiTm->Reserved2[ii] = 0; 367 368 switch (ioc->bus_type) { 369 case FC: 370 timeout = 40; 371 break; 372 case SAS: 373 timeout = 30; 374 break; 375 case SPI: 376 default: 377 timeout = 10; 378 break; 379 } 380 381 dtmprintk(ioc, 382 printk(MYIOC_s_DEBUG_FMT "TaskMgmt type=%d timeout=%ld\n", 383 ioc->name, tm_type, timeout)); 384 385 INITIALIZE_MGMT_STATUS(ioc->taskmgmt_cmds.status) 386 time_count = jiffies; 387 if ((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) && 388 (ioc->facts.MsgVersion >= MPI_VERSION_01_05)) 389 mpt_put_msg_frame_hi_pri(mptctl_taskmgmt_id, ioc, mf); 390 else { 391 retval = mpt_send_handshake_request(mptctl_taskmgmt_id, ioc, 392 sizeof(SCSITaskMgmt_t), (u32 *)pScsiTm, CAN_SLEEP); 393 if (retval != 0) { 394 dfailprintk(ioc, 395 printk(MYIOC_s_ERR_FMT 396 "TaskMgmt send_handshake FAILED!" 397 " (ioc %p, mf %p, rc=%d) \n", ioc->name, 398 ioc, mf, retval)); 399 mpt_free_msg_frame(ioc, mf); 400 mpt_clear_taskmgmt_in_progress_flag(ioc); 401 goto tm_done; 402 } 403 } 404 405 /* Now wait for the command to complete */ 406 ii = wait_for_completion_timeout(&ioc->taskmgmt_cmds.done, timeout*HZ); 407 408 if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { 409 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 410 "TaskMgmt failed\n", ioc->name)); 411 mpt_free_msg_frame(ioc, mf); 412 mpt_clear_taskmgmt_in_progress_flag(ioc); 413 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) 414 retval = 0; 415 else 416 retval = -1; /* return failure */ 417 goto tm_done; 418 } 419 420 if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_RF_VALID)) { 421 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 422 "TaskMgmt failed\n", ioc->name)); 423 retval = -1; /* return failure */ 424 goto tm_done; 425 } 426 427 pScsiTmReply = (SCSITaskMgmtReply_t *) ioc->taskmgmt_cmds.reply; 428 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 429 "TaskMgmt fw_channel = %d, fw_id = %d, task_type=0x%02X, " 430 "iocstatus=0x%04X\n\tloginfo=0x%08X, response_code=0x%02X, " 431 "term_cmnds=%d\n", ioc->name, pScsiTmReply->Bus, 432 pScsiTmReply->TargetID, tm_type, 433 le16_to_cpu(pScsiTmReply->IOCStatus), 434 le32_to_cpu(pScsiTmReply->IOCLogInfo), 435 pScsiTmReply->ResponseCode, 436 le32_to_cpu(pScsiTmReply->TerminationCount))); 437 438 iocstatus = le16_to_cpu(pScsiTmReply->IOCStatus) & MPI_IOCSTATUS_MASK; 439 440 if (iocstatus == MPI_IOCSTATUS_SCSI_TASK_TERMINATED || 441 iocstatus == MPI_IOCSTATUS_SCSI_IOC_TERMINATED || 442 iocstatus == MPI_IOCSTATUS_SUCCESS) 443 retval = 0; 444 else { 445 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 446 "TaskMgmt failed\n", ioc->name)); 447 retval = -1; /* return failure */ 448 } 449 450 tm_done: 451 mutex_unlock(&ioc->taskmgmt_cmds.mutex); 452 CLEAR_MGMT_STATUS(ioc->taskmgmt_cmds.status) 453 return retval; 454 } 455 456 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 457 /* mptctl_timeout_expired 458 * 459 * Expecting an interrupt, however timed out. 460 * 461 */ 462 static void 463 mptctl_timeout_expired(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf) 464 { 465 unsigned long flags; 466 int ret_val = -1; 467 SCSIIORequest_t *scsi_req = (SCSIIORequest_t *) mf; 468 u8 function = mf->u.hdr.Function; 469 470 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": %s\n", 471 ioc->name, __func__)); 472 473 if (mpt_fwfault_debug) 474 mpt_halt_firmware(ioc); 475 476 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 477 if (ioc->ioc_reset_in_progress) { 478 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 479 CLEAR_MGMT_PENDING_STATUS(ioc->ioctl_cmds.status) 480 mpt_free_msg_frame(ioc, mf); 481 return; 482 } 483 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 484 485 486 CLEAR_MGMT_PENDING_STATUS(ioc->ioctl_cmds.status) 487 488 if (ioc->bus_type == SAS) { 489 if (function == MPI_FUNCTION_SCSI_IO_REQUEST) 490 ret_val = mptctl_do_taskmgmt(ioc, 491 MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 492 scsi_req->Bus, scsi_req->TargetID); 493 else if (function == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) 494 ret_val = mptctl_do_taskmgmt(ioc, 495 MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS, 496 scsi_req->Bus, 0); 497 if (!ret_val) 498 return; 499 } else { 500 if ((function == MPI_FUNCTION_SCSI_IO_REQUEST) || 501 (function == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) 502 ret_val = mptctl_do_taskmgmt(ioc, 503 MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS, 504 scsi_req->Bus, 0); 505 if (!ret_val) 506 return; 507 } 508 509 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Calling Reset! \n", 510 ioc->name)); 511 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); 512 mpt_free_msg_frame(ioc, mf); 513 } 514 515 516 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 517 /* mptctl_ioc_reset 518 * 519 * Clean-up functionality. Used only if there has been a 520 * reload of the FW due. 521 * 522 */ 523 static int 524 mptctl_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) 525 { 526 switch(reset_phase) { 527 case MPT_IOC_SETUP_RESET: 528 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 529 "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__)); 530 break; 531 case MPT_IOC_PRE_RESET: 532 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 533 "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__)); 534 break; 535 case MPT_IOC_POST_RESET: 536 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 537 "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__)); 538 if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_PENDING) { 539 ioc->ioctl_cmds.status |= MPT_MGMT_STATUS_DID_IOCRESET; 540 complete(&ioc->ioctl_cmds.done); 541 } 542 break; 543 default: 544 break; 545 } 546 547 return 1; 548 } 549 550 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 551 /* ASYNC Event Notification Support */ 552 static int 553 mptctl_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) 554 { 555 u8 event; 556 557 event = le32_to_cpu(pEvReply->Event) & 0xFF; 558 559 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s() called\n", 560 ioc->name, __func__)); 561 if(async_queue == NULL) 562 return 1; 563 564 /* Raise SIGIO for persistent events. 565 * TODO - this define is not in MPI spec yet, 566 * but they plan to set it to 0x21 567 */ 568 if (event == 0x21) { 569 ioc->aen_event_read_flag=1; 570 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Raised SIGIO to application\n", 571 ioc->name)); 572 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT 573 "Raised SIGIO to application\n", ioc->name)); 574 kill_fasync(&async_queue, SIGIO, POLL_IN); 575 return 1; 576 } 577 578 /* This flag is set after SIGIO was raised, and 579 * remains set until the application has read 580 * the event log via ioctl=MPTEVENTREPORT 581 */ 582 if(ioc->aen_event_read_flag) 583 return 1; 584 585 /* Signal only for the events that are 586 * requested for by the application 587 */ 588 if (ioc->events && (ioc->eventTypes & ( 1 << event))) { 589 ioc->aen_event_read_flag=1; 590 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 591 "Raised SIGIO to application\n", ioc->name)); 592 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT 593 "Raised SIGIO to application\n", ioc->name)); 594 kill_fasync(&async_queue, SIGIO, POLL_IN); 595 } 596 return 1; 597 } 598 599 static int 600 mptctl_fasync(int fd, struct file *filep, int mode) 601 { 602 MPT_ADAPTER *ioc; 603 int ret; 604 605 mutex_lock(&mpctl_mutex); 606 list_for_each_entry(ioc, &ioc_list, list) 607 ioc->aen_event_read_flag=0; 608 609 ret = fasync_helper(fd, filep, mode, &async_queue); 610 mutex_unlock(&mpctl_mutex); 611 return ret; 612 } 613 614 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 615 /* 616 * MPT ioctl handler 617 * cmd - specify the particular IOCTL command to be issued 618 * arg - data specific to the command. Must not be null. 619 */ 620 static long 621 __mptctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg) 622 { 623 mpt_ioctl_header __user *uhdr = (void __user *) arg; 624 mpt_ioctl_header khdr; 625 int iocnum; 626 unsigned iocnumX; 627 int nonblock = (file->f_flags & O_NONBLOCK); 628 int ret; 629 MPT_ADAPTER *iocp = NULL; 630 631 if (copy_from_user(&khdr, uhdr, sizeof(khdr))) { 632 printk(KERN_ERR MYNAM "%s::mptctl_ioctl() @%d - " 633 "Unable to copy mpt_ioctl_header data @ %p\n", 634 __FILE__, __LINE__, uhdr); 635 return -EFAULT; 636 } 637 ret = -ENXIO; /* (-6) No such device or address */ 638 639 /* Verify intended MPT adapter - set iocnum and the adapter 640 * pointer (iocp) 641 */ 642 iocnumX = khdr.iocnum & 0xFF; 643 if (((iocnum = mpt_verify_adapter(iocnumX, &iocp)) < 0) || 644 (iocp == NULL)) 645 return -ENODEV; 646 647 if (!iocp->active) { 648 printk(KERN_DEBUG MYNAM "%s::mptctl_ioctl() @%d - Controller disabled.\n", 649 __FILE__, __LINE__); 650 return -EFAULT; 651 } 652 653 /* Handle those commands that are just returning 654 * information stored in the driver. 655 * These commands should never time out and are unaffected 656 * by TM and FW reloads. 657 */ 658 if ((cmd & ~IOCSIZE_MASK) == (MPTIOCINFO & ~IOCSIZE_MASK)) { 659 return mptctl_getiocinfo(iocp, arg, _IOC_SIZE(cmd)); 660 } else if (cmd == MPTTARGETINFO) { 661 return mptctl_gettargetinfo(iocp, arg); 662 } else if (cmd == MPTTEST) { 663 return mptctl_readtest(iocp, arg); 664 } else if (cmd == MPTEVENTQUERY) { 665 return mptctl_eventquery(iocp, arg); 666 } else if (cmd == MPTEVENTENABLE) { 667 return mptctl_eventenable(iocp, arg); 668 } else if (cmd == MPTEVENTREPORT) { 669 return mptctl_eventreport(iocp, arg); 670 } else if (cmd == MPTFWREPLACE) { 671 return mptctl_replace_fw(iocp, arg); 672 } 673 674 /* All of these commands require an interrupt or 675 * are unknown/illegal. 676 */ 677 if ((ret = mptctl_syscall_down(iocp, nonblock)) != 0) 678 return ret; 679 680 if (cmd == MPTFWDOWNLOAD) 681 ret = mptctl_fw_download(iocp, arg); 682 else if (cmd == MPTCOMMAND) 683 ret = mptctl_mpt_command(iocp, arg); 684 else if (cmd == MPTHARDRESET) 685 ret = mptctl_do_reset(iocp, arg); 686 else if ((cmd & ~IOCSIZE_MASK) == (HP_GETHOSTINFO & ~IOCSIZE_MASK)) 687 ret = mptctl_hp_hostinfo(iocp, arg, _IOC_SIZE(cmd)); 688 else if (cmd == HP_GETTARGETINFO) 689 ret = mptctl_hp_targetinfo(iocp, arg); 690 else 691 ret = -EINVAL; 692 693 mutex_unlock(&iocp->ioctl_cmds.mutex); 694 695 return ret; 696 } 697 698 static long 699 mptctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg) 700 { 701 long ret; 702 mutex_lock(&mpctl_mutex); 703 ret = __mptctl_ioctl(file, cmd, arg); 704 mutex_unlock(&mpctl_mutex); 705 return ret; 706 } 707 708 static int mptctl_do_reset(MPT_ADAPTER *iocp, unsigned long arg) 709 { 710 struct mpt_ioctl_diag_reset __user *urinfo = (void __user *) arg; 711 struct mpt_ioctl_diag_reset krinfo; 712 713 if (copy_from_user(&krinfo, urinfo, sizeof(struct mpt_ioctl_diag_reset))) { 714 printk(KERN_ERR MYNAM "%s@%d::mptctl_do_reset - " 715 "Unable to copy mpt_ioctl_diag_reset struct @ %p\n", 716 __FILE__, __LINE__, urinfo); 717 return -EFAULT; 718 } 719 720 dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "mptctl_do_reset called.\n", 721 iocp->name)); 722 723 if (mpt_HardResetHandler(iocp, CAN_SLEEP) != 0) { 724 printk (MYIOC_s_ERR_FMT "%s@%d::mptctl_do_reset - reset failed.\n", 725 iocp->name, __FILE__, __LINE__); 726 return -1; 727 } 728 729 return 0; 730 } 731 732 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 733 /* 734 * MPT FW download function. Cast the arg into the mpt_fw_xfer structure. 735 * This structure contains: iocnum, firmware length (bytes), 736 * pointer to user space memory where the fw image is stored. 737 * 738 * Outputs: None. 739 * Return: 0 if successful 740 * -EFAULT if data unavailable 741 * -ENXIO if no such device 742 * -EAGAIN if resource problem 743 * -ENOMEM if no memory for SGE 744 * -EMLINK if too many chain buffers required 745 * -EBADRQC if adapter does not support FW download 746 * -EBUSY if adapter is busy 747 * -ENOMSG if FW upload returned bad status 748 */ 749 static int 750 mptctl_fw_download(MPT_ADAPTER *iocp, unsigned long arg) 751 { 752 struct mpt_fw_xfer __user *ufwdl = (void __user *) arg; 753 struct mpt_fw_xfer kfwdl; 754 755 if (copy_from_user(&kfwdl, ufwdl, sizeof(struct mpt_fw_xfer))) { 756 printk(KERN_ERR MYNAM "%s@%d::_ioctl_fwdl - " 757 "Unable to copy mpt_fw_xfer struct @ %p\n", 758 __FILE__, __LINE__, ufwdl); 759 return -EFAULT; 760 } 761 762 return mptctl_do_fw_download(iocp, kfwdl.bufp, kfwdl.fwlen); 763 } 764 765 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 766 /* 767 * FW Download engine. 768 * Outputs: None. 769 * Return: 0 if successful 770 * -EFAULT if data unavailable 771 * -ENXIO if no such device 772 * -EAGAIN if resource problem 773 * -ENOMEM if no memory for SGE 774 * -EMLINK if too many chain buffers required 775 * -EBADRQC if adapter does not support FW download 776 * -EBUSY if adapter is busy 777 * -ENOMSG if FW upload returned bad status 778 */ 779 static int 780 mptctl_do_fw_download(MPT_ADAPTER *iocp, char __user *ufwbuf, size_t fwlen) 781 { 782 FWDownload_t *dlmsg; 783 MPT_FRAME_HDR *mf; 784 FWDownloadTCSGE_t *ptsge; 785 MptSge_t *sgl, *sgIn; 786 char *sgOut; 787 struct buflist *buflist; 788 struct buflist *bl; 789 dma_addr_t sgl_dma; 790 int ret; 791 int numfrags = 0; 792 int maxfrags; 793 int n = 0; 794 u32 sgdir; 795 u32 nib; 796 int fw_bytes_copied = 0; 797 int i; 798 int sge_offset = 0; 799 u16 iocstat; 800 pFWDownloadReply_t ReplyMsg = NULL; 801 unsigned long timeleft; 802 803 /* Valid device. Get a message frame and construct the FW download message. 804 */ 805 if ((mf = mpt_get_msg_frame(mptctl_id, iocp)) == NULL) 806 return -EAGAIN; 807 808 dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT 809 "mptctl_do_fwdl called. mptctl_id = %xh.\n", iocp->name, mptctl_id)); 810 dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "DbG: kfwdl.bufp = %p\n", 811 iocp->name, ufwbuf)); 812 dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "DbG: kfwdl.fwlen = %d\n", 813 iocp->name, (int)fwlen)); 814 815 dlmsg = (FWDownload_t*) mf; 816 ptsge = (FWDownloadTCSGE_t *) &dlmsg->SGL; 817 sgOut = (char *) (ptsge + 1); 818 819 /* 820 * Construct f/w download request 821 */ 822 dlmsg->ImageType = MPI_FW_DOWNLOAD_ITYPE_FW; 823 dlmsg->Reserved = 0; 824 dlmsg->ChainOffset = 0; 825 dlmsg->Function = MPI_FUNCTION_FW_DOWNLOAD; 826 dlmsg->Reserved1[0] = dlmsg->Reserved1[1] = dlmsg->Reserved1[2] = 0; 827 if (iocp->facts.MsgVersion >= MPI_VERSION_01_05) 828 dlmsg->MsgFlags = MPI_FW_DOWNLOAD_MSGFLGS_LAST_SEGMENT; 829 else 830 dlmsg->MsgFlags = 0; 831 832 833 /* Set up the Transaction SGE. 834 */ 835 ptsge->Reserved = 0; 836 ptsge->ContextSize = 0; 837 ptsge->DetailsLength = 12; 838 ptsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT; 839 ptsge->Reserved_0100_Checksum = 0; 840 ptsge->ImageOffset = 0; 841 ptsge->ImageSize = cpu_to_le32(fwlen); 842 843 /* Add the SGL 844 */ 845 846 /* 847 * Need to kmalloc area(s) for holding firmware image bytes. 848 * But we need to do it piece meal, using a proper 849 * scatter gather list (with 128kB MAX hunks). 850 * 851 * A practical limit here might be # of sg hunks that fit into 852 * a single IOC request frame; 12 or 8 (see below), so: 853 * For FC9xx: 12 x 128kB == 1.5 mB (max) 854 * For C1030: 8 x 128kB == 1 mB (max) 855 * We could support chaining, but things get ugly(ier:) 856 * 857 * Set the sge_offset to the start of the sgl (bytes). 858 */ 859 sgdir = 0x04000000; /* IOC will READ from sys mem */ 860 sge_offset = sizeof(MPIHeader_t) + sizeof(FWDownloadTCSGE_t); 861 if ((sgl = kbuf_alloc_2_sgl(fwlen, sgdir, sge_offset, 862 &numfrags, &buflist, &sgl_dma, iocp)) == NULL) 863 return -ENOMEM; 864 865 /* 866 * We should only need SGL with 2 simple_32bit entries (up to 256 kB) 867 * for FC9xx f/w image, but calculate max number of sge hunks 868 * we can fit into a request frame, and limit ourselves to that. 869 * (currently no chain support) 870 * maxfrags = (Request Size - FWdownload Size ) / Size of 32 bit SGE 871 * Request maxfrags 872 * 128 12 873 * 96 8 874 * 64 4 875 */ 876 maxfrags = (iocp->req_sz - sizeof(MPIHeader_t) - 877 sizeof(FWDownloadTCSGE_t)) 878 / iocp->SGE_size; 879 if (numfrags > maxfrags) { 880 ret = -EMLINK; 881 goto fwdl_out; 882 } 883 884 dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "DbG: sgl buffer = %p, sgfrags = %d\n", 885 iocp->name, sgl, numfrags)); 886 887 /* 888 * Parse SG list, copying sgl itself, 889 * plus f/w image hunks from user space as we go... 890 */ 891 ret = -EFAULT; 892 sgIn = sgl; 893 bl = buflist; 894 for (i=0; i < numfrags; i++) { 895 896 /* Get the SGE type: 0 - TCSGE, 3 - Chain, 1 - Simple SGE 897 * Skip everything but Simple. If simple, copy from 898 * user space into kernel space. 899 * Note: we should not have anything but Simple as 900 * Chain SGE are illegal. 901 */ 902 nib = (sgIn->FlagsLength & 0x30000000) >> 28; 903 if (nib == 0 || nib == 3) { 904 ; 905 } else if (sgIn->Address) { 906 iocp->add_sge(sgOut, sgIn->FlagsLength, sgIn->Address); 907 n++; 908 if (copy_from_user(bl->kptr, ufwbuf+fw_bytes_copied, bl->len)) { 909 printk(MYIOC_s_ERR_FMT "%s@%d::_ioctl_fwdl - " 910 "Unable to copy f/w buffer hunk#%d @ %p\n", 911 iocp->name, __FILE__, __LINE__, n, ufwbuf); 912 goto fwdl_out; 913 } 914 fw_bytes_copied += bl->len; 915 } 916 sgIn++; 917 bl++; 918 sgOut += iocp->SGE_size; 919 } 920 921 DBG_DUMP_FW_DOWNLOAD(iocp, (u32 *)mf, numfrags); 922 923 /* 924 * Finally, perform firmware download. 925 */ 926 ReplyMsg = NULL; 927 SET_MGMT_MSG_CONTEXT(iocp->ioctl_cmds.msg_context, dlmsg->MsgContext); 928 INITIALIZE_MGMT_STATUS(iocp->ioctl_cmds.status) 929 mpt_put_msg_frame(mptctl_id, iocp, mf); 930 931 /* Now wait for the command to complete */ 932 retry_wait: 933 timeleft = wait_for_completion_timeout(&iocp->ioctl_cmds.done, HZ*60); 934 if (!(iocp->ioctl_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { 935 ret = -ETIME; 936 printk(MYIOC_s_WARN_FMT "%s: failed\n", iocp->name, __func__); 937 if (iocp->ioctl_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) { 938 mpt_free_msg_frame(iocp, mf); 939 goto fwdl_out; 940 } 941 if (!timeleft) { 942 printk(MYIOC_s_WARN_FMT 943 "FW download timeout, doorbell=0x%08x\n", 944 iocp->name, mpt_GetIocState(iocp, 0)); 945 mptctl_timeout_expired(iocp, mf); 946 } else 947 goto retry_wait; 948 goto fwdl_out; 949 } 950 951 if (!(iocp->ioctl_cmds.status & MPT_MGMT_STATUS_RF_VALID)) { 952 printk(MYIOC_s_WARN_FMT "%s: failed\n", iocp->name, __func__); 953 mpt_free_msg_frame(iocp, mf); 954 ret = -ENODATA; 955 goto fwdl_out; 956 } 957 958 if (sgl) 959 kfree_sgl(sgl, sgl_dma, buflist, iocp); 960 961 ReplyMsg = (pFWDownloadReply_t)iocp->ioctl_cmds.reply; 962 iocstat = le16_to_cpu(ReplyMsg->IOCStatus) & MPI_IOCSTATUS_MASK; 963 if (iocstat == MPI_IOCSTATUS_SUCCESS) { 964 printk(MYIOC_s_INFO_FMT "F/W update successful!\n", iocp->name); 965 return 0; 966 } else if (iocstat == MPI_IOCSTATUS_INVALID_FUNCTION) { 967 printk(MYIOC_s_WARN_FMT "Hmmm... F/W download not supported!?!\n", 968 iocp->name); 969 printk(MYIOC_s_WARN_FMT "(time to go bang on somebodies door)\n", 970 iocp->name); 971 return -EBADRQC; 972 } else if (iocstat == MPI_IOCSTATUS_BUSY) { 973 printk(MYIOC_s_WARN_FMT "IOC_BUSY!\n", iocp->name); 974 printk(MYIOC_s_WARN_FMT "(try again later?)\n", iocp->name); 975 return -EBUSY; 976 } else { 977 printk(MYIOC_s_WARN_FMT "ioctl_fwdl() returned [bad] status = %04xh\n", 978 iocp->name, iocstat); 979 printk(MYIOC_s_WARN_FMT "(bad VooDoo)\n", iocp->name); 980 return -ENOMSG; 981 } 982 return 0; 983 984 fwdl_out: 985 986 CLEAR_MGMT_STATUS(iocp->ioctl_cmds.status); 987 SET_MGMT_MSG_CONTEXT(iocp->ioctl_cmds.msg_context, 0); 988 kfree_sgl(sgl, sgl_dma, buflist, iocp); 989 return ret; 990 } 991 992 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 993 /* 994 * SGE Allocation routine 995 * 996 * Inputs: bytes - number of bytes to be transferred 997 * sgdir - data direction 998 * sge_offset - offset (in bytes) from the start of the request 999 * frame to the first SGE 1000 * ioc - pointer to the mptadapter 1001 * Outputs: frags - number of scatter gather elements 1002 * blp - point to the buflist pointer 1003 * sglbuf_dma - pointer to the (dma) sgl 1004 * Returns: Null if failes 1005 * pointer to the (virtual) sgl if successful. 1006 */ 1007 static MptSge_t * 1008 kbuf_alloc_2_sgl(int bytes, u32 sgdir, int sge_offset, int *frags, 1009 struct buflist **blp, dma_addr_t *sglbuf_dma, MPT_ADAPTER *ioc) 1010 { 1011 MptSge_t *sglbuf = NULL; /* pointer to array of SGE */ 1012 /* and chain buffers */ 1013 struct buflist *buflist = NULL; /* kernel routine */ 1014 MptSge_t *sgl; 1015 int numfrags = 0; 1016 int fragcnt = 0; 1017 int alloc_sz = min(bytes,MAX_KMALLOC_SZ); // avoid kernel warning msg! 1018 int bytes_allocd = 0; 1019 int this_alloc; 1020 dma_addr_t pa; // phys addr 1021 int i, buflist_ent; 1022 int sg_spill = MAX_FRAGS_SPILL1; 1023 int dir; 1024 1025 if (bytes < 0) 1026 return NULL; 1027 1028 /* initialization */ 1029 *frags = 0; 1030 *blp = NULL; 1031 1032 /* Allocate and initialize an array of kernel 1033 * structures for the SG elements. 1034 */ 1035 i = MAX_SGL_BYTES / 8; 1036 buflist = kzalloc(i, GFP_USER); 1037 if (!buflist) 1038 return NULL; 1039 buflist_ent = 0; 1040 1041 /* Allocate a single block of memory to store the sg elements and 1042 * the chain buffers. The calling routine is responsible for 1043 * copying the data in this array into the correct place in the 1044 * request and chain buffers. 1045 */ 1046 sglbuf = pci_alloc_consistent(ioc->pcidev, MAX_SGL_BYTES, sglbuf_dma); 1047 if (sglbuf == NULL) 1048 goto free_and_fail; 1049 1050 if (sgdir & 0x04000000) 1051 dir = PCI_DMA_TODEVICE; 1052 else 1053 dir = PCI_DMA_FROMDEVICE; 1054 1055 /* At start: 1056 * sgl = sglbuf = point to beginning of sg buffer 1057 * buflist_ent = 0 = first kernel structure 1058 * sg_spill = number of SGE that can be written before the first 1059 * chain element. 1060 * 1061 */ 1062 sgl = sglbuf; 1063 sg_spill = ((ioc->req_sz - sge_offset)/ioc->SGE_size) - 1; 1064 while (bytes_allocd < bytes) { 1065 this_alloc = min(alloc_sz, bytes-bytes_allocd); 1066 buflist[buflist_ent].len = this_alloc; 1067 buflist[buflist_ent].kptr = pci_alloc_consistent(ioc->pcidev, 1068 this_alloc, 1069 &pa); 1070 if (buflist[buflist_ent].kptr == NULL) { 1071 alloc_sz = alloc_sz / 2; 1072 if (alloc_sz == 0) { 1073 printk(MYIOC_s_WARN_FMT "-SG: No can do - " 1074 "not enough memory! :-(\n", ioc->name); 1075 printk(MYIOC_s_WARN_FMT "-SG: (freeing %d frags)\n", 1076 ioc->name, numfrags); 1077 goto free_and_fail; 1078 } 1079 continue; 1080 } else { 1081 dma_addr_t dma_addr; 1082 1083 bytes_allocd += this_alloc; 1084 sgl->FlagsLength = (0x10000000|sgdir|this_alloc); 1085 dma_addr = pci_map_single(ioc->pcidev, 1086 buflist[buflist_ent].kptr, this_alloc, dir); 1087 sgl->Address = dma_addr; 1088 1089 fragcnt++; 1090 numfrags++; 1091 sgl++; 1092 buflist_ent++; 1093 } 1094 1095 if (bytes_allocd >= bytes) 1096 break; 1097 1098 /* Need to chain? */ 1099 if (fragcnt == sg_spill) { 1100 printk(MYIOC_s_WARN_FMT 1101 "-SG: No can do - " "Chain required! :-(\n", ioc->name); 1102 printk(MYIOC_s_WARN_FMT "(freeing %d frags)\n", ioc->name, numfrags); 1103 goto free_and_fail; 1104 } 1105 1106 /* overflow check... */ 1107 if (numfrags*8 > MAX_SGL_BYTES){ 1108 /* GRRRRR... */ 1109 printk(MYIOC_s_WARN_FMT "-SG: No can do - " 1110 "too many SG frags! :-(\n", ioc->name); 1111 printk(MYIOC_s_WARN_FMT "-SG: (freeing %d frags)\n", 1112 ioc->name, numfrags); 1113 goto free_and_fail; 1114 } 1115 } 1116 1117 /* Last sge fixup: set LE+eol+eob bits */ 1118 sgl[-1].FlagsLength |= 0xC1000000; 1119 1120 *frags = numfrags; 1121 *blp = buflist; 1122 1123 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "-SG: kbuf_alloc_2_sgl() - " 1124 "%d SG frags generated!\n", ioc->name, numfrags)); 1125 1126 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "-SG: kbuf_alloc_2_sgl() - " 1127 "last (big) alloc_sz=%d\n", ioc->name, alloc_sz)); 1128 1129 return sglbuf; 1130 1131 free_and_fail: 1132 if (sglbuf != NULL) { 1133 for (i = 0; i < numfrags; i++) { 1134 dma_addr_t dma_addr; 1135 u8 *kptr; 1136 int len; 1137 1138 if ((sglbuf[i].FlagsLength >> 24) == 0x30) 1139 continue; 1140 1141 dma_addr = sglbuf[i].Address; 1142 kptr = buflist[i].kptr; 1143 len = buflist[i].len; 1144 1145 pci_free_consistent(ioc->pcidev, len, kptr, dma_addr); 1146 } 1147 pci_free_consistent(ioc->pcidev, MAX_SGL_BYTES, sglbuf, *sglbuf_dma); 1148 } 1149 kfree(buflist); 1150 return NULL; 1151 } 1152 1153 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1154 /* 1155 * Routine to free the SGL elements. 1156 */ 1157 static void 1158 kfree_sgl(MptSge_t *sgl, dma_addr_t sgl_dma, struct buflist *buflist, MPT_ADAPTER *ioc) 1159 { 1160 MptSge_t *sg = sgl; 1161 struct buflist *bl = buflist; 1162 u32 nib; 1163 int dir; 1164 int n = 0; 1165 1166 if (sg->FlagsLength & 0x04000000) 1167 dir = PCI_DMA_TODEVICE; 1168 else 1169 dir = PCI_DMA_FROMDEVICE; 1170 1171 nib = (sg->FlagsLength & 0xF0000000) >> 28; 1172 while (! (nib & 0x4)) { /* eob */ 1173 /* skip ignore/chain. */ 1174 if (nib == 0 || nib == 3) { 1175 ; 1176 } else if (sg->Address) { 1177 dma_addr_t dma_addr; 1178 void *kptr; 1179 int len; 1180 1181 dma_addr = sg->Address; 1182 kptr = bl->kptr; 1183 len = bl->len; 1184 pci_unmap_single(ioc->pcidev, dma_addr, len, dir); 1185 pci_free_consistent(ioc->pcidev, len, kptr, dma_addr); 1186 n++; 1187 } 1188 sg++; 1189 bl++; 1190 nib = (le32_to_cpu(sg->FlagsLength) & 0xF0000000) >> 28; 1191 } 1192 1193 /* we're at eob! */ 1194 if (sg->Address) { 1195 dma_addr_t dma_addr; 1196 void *kptr; 1197 int len; 1198 1199 dma_addr = sg->Address; 1200 kptr = bl->kptr; 1201 len = bl->len; 1202 pci_unmap_single(ioc->pcidev, dma_addr, len, dir); 1203 pci_free_consistent(ioc->pcidev, len, kptr, dma_addr); 1204 n++; 1205 } 1206 1207 pci_free_consistent(ioc->pcidev, MAX_SGL_BYTES, sgl, sgl_dma); 1208 kfree(buflist); 1209 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "-SG: Free'd 1 SGL buf + %d kbufs!\n", 1210 ioc->name, n)); 1211 } 1212 1213 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1214 /* 1215 * mptctl_getiocinfo - Query the host adapter for IOC information. 1216 * @arg: User space argument 1217 * 1218 * Outputs: None. 1219 * Return: 0 if successful 1220 * -EFAULT if data unavailable 1221 * -ENODEV if no such device/adapter 1222 */ 1223 static int 1224 mptctl_getiocinfo (MPT_ADAPTER *ioc, unsigned long arg, unsigned int data_size) 1225 { 1226 struct mpt_ioctl_iocinfo __user *uarg = (void __user *) arg; 1227 struct mpt_ioctl_iocinfo *karg; 1228 struct pci_dev *pdev; 1229 unsigned int port; 1230 int cim_rev; 1231 struct scsi_device *sdev; 1232 VirtDevice *vdevice; 1233 1234 /* Add of PCI INFO results in unaligned access for 1235 * IA64 and Sparc. Reset long to int. Return no PCI 1236 * data for obsolete format. 1237 */ 1238 if (data_size == sizeof(struct mpt_ioctl_iocinfo_rev0)) 1239 cim_rev = 0; 1240 else if (data_size == sizeof(struct mpt_ioctl_iocinfo_rev1)) 1241 cim_rev = 1; 1242 else if (data_size == sizeof(struct mpt_ioctl_iocinfo)) 1243 cim_rev = 2; 1244 else if (data_size == (sizeof(struct mpt_ioctl_iocinfo_rev0)+12)) 1245 cim_rev = 0; /* obsolete */ 1246 else 1247 return -EFAULT; 1248 1249 karg = memdup_user(uarg, data_size); 1250 if (IS_ERR(karg)) { 1251 printk(KERN_ERR MYNAM "%s@%d::mpt_ioctl_iocinfo() - memdup_user returned error [%ld]\n", 1252 __FILE__, __LINE__, PTR_ERR(karg)); 1253 return PTR_ERR(karg); 1254 } 1255 1256 /* Verify the data transfer size is correct. */ 1257 if (karg->hdr.maxDataSize != data_size) { 1258 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_getiocinfo - " 1259 "Structure size mismatch. Command not completed.\n", 1260 ioc->name, __FILE__, __LINE__); 1261 kfree(karg); 1262 return -EFAULT; 1263 } 1264 1265 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_getiocinfo called.\n", 1266 ioc->name)); 1267 1268 /* Fill in the data and return the structure to the calling 1269 * program 1270 */ 1271 if (ioc->bus_type == SAS) 1272 karg->adapterType = MPT_IOCTL_INTERFACE_SAS; 1273 else if (ioc->bus_type == FC) 1274 karg->adapterType = MPT_IOCTL_INTERFACE_FC; 1275 else 1276 karg->adapterType = MPT_IOCTL_INTERFACE_SCSI; 1277 1278 if (karg->hdr.port > 1) { 1279 kfree(karg); 1280 return -EINVAL; 1281 } 1282 port = karg->hdr.port; 1283 1284 karg->port = port; 1285 pdev = (struct pci_dev *) ioc->pcidev; 1286 1287 karg->pciId = pdev->device; 1288 karg->hwRev = pdev->revision; 1289 karg->subSystemDevice = pdev->subsystem_device; 1290 karg->subSystemVendor = pdev->subsystem_vendor; 1291 1292 if (cim_rev == 1) { 1293 /* Get the PCI bus, device, and function numbers for the IOC 1294 */ 1295 karg->pciInfo.u.bits.busNumber = pdev->bus->number; 1296 karg->pciInfo.u.bits.deviceNumber = PCI_SLOT( pdev->devfn ); 1297 karg->pciInfo.u.bits.functionNumber = PCI_FUNC( pdev->devfn ); 1298 } else if (cim_rev == 2) { 1299 /* Get the PCI bus, device, function and segment ID numbers 1300 for the IOC */ 1301 karg->pciInfo.u.bits.busNumber = pdev->bus->number; 1302 karg->pciInfo.u.bits.deviceNumber = PCI_SLOT( pdev->devfn ); 1303 karg->pciInfo.u.bits.functionNumber = PCI_FUNC( pdev->devfn ); 1304 karg->pciInfo.segmentID = pci_domain_nr(pdev->bus); 1305 } 1306 1307 /* Get number of devices 1308 */ 1309 karg->numDevices = 0; 1310 if (ioc->sh) { 1311 shost_for_each_device(sdev, ioc->sh) { 1312 vdevice = sdev->hostdata; 1313 if (vdevice == NULL || vdevice->vtarget == NULL) 1314 continue; 1315 if (vdevice->vtarget->tflags & 1316 MPT_TARGET_FLAGS_RAID_COMPONENT) 1317 continue; 1318 karg->numDevices++; 1319 } 1320 } 1321 1322 /* Set the BIOS and FW Version 1323 */ 1324 karg->FWVersion = ioc->facts.FWVersion.Word; 1325 karg->BIOSVersion = ioc->biosVersion; 1326 1327 /* Set the Version Strings. 1328 */ 1329 strncpy (karg->driverVersion, MPT_LINUX_PACKAGE_NAME, MPT_IOCTL_VERSION_LENGTH); 1330 karg->driverVersion[MPT_IOCTL_VERSION_LENGTH-1]='\0'; 1331 1332 karg->busChangeEvent = 0; 1333 karg->hostId = ioc->pfacts[port].PortSCSIID; 1334 karg->rsvd[0] = karg->rsvd[1] = 0; 1335 1336 /* Copy the data from kernel memory to user memory 1337 */ 1338 if (copy_to_user((char __user *)arg, karg, data_size)) { 1339 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_getiocinfo - " 1340 "Unable to write out mpt_ioctl_iocinfo struct @ %p\n", 1341 ioc->name, __FILE__, __LINE__, uarg); 1342 kfree(karg); 1343 return -EFAULT; 1344 } 1345 1346 kfree(karg); 1347 return 0; 1348 } 1349 1350 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1351 /* 1352 * mptctl_gettargetinfo - Query the host adapter for target information. 1353 * @arg: User space argument 1354 * 1355 * Outputs: None. 1356 * Return: 0 if successful 1357 * -EFAULT if data unavailable 1358 * -ENODEV if no such device/adapter 1359 */ 1360 static int 1361 mptctl_gettargetinfo (MPT_ADAPTER *ioc, unsigned long arg) 1362 { 1363 struct mpt_ioctl_targetinfo __user *uarg = (void __user *) arg; 1364 struct mpt_ioctl_targetinfo karg; 1365 VirtDevice *vdevice; 1366 char *pmem; 1367 int *pdata; 1368 int numDevices = 0; 1369 int lun; 1370 int maxWordsLeft; 1371 int numBytes; 1372 u8 port; 1373 struct scsi_device *sdev; 1374 1375 if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_targetinfo))) { 1376 printk(KERN_ERR MYNAM "%s@%d::mptctl_gettargetinfo - " 1377 "Unable to read in mpt_ioctl_targetinfo struct @ %p\n", 1378 __FILE__, __LINE__, uarg); 1379 return -EFAULT; 1380 } 1381 1382 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_gettargetinfo called.\n", 1383 ioc->name)); 1384 /* Get the port number and set the maximum number of bytes 1385 * in the returned structure. 1386 * Ignore the port setting. 1387 */ 1388 numBytes = karg.hdr.maxDataSize - sizeof(mpt_ioctl_header); 1389 maxWordsLeft = numBytes/sizeof(int); 1390 port = karg.hdr.port; 1391 1392 if (maxWordsLeft <= 0) { 1393 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_gettargetinfo() - no memory available!\n", 1394 ioc->name, __FILE__, __LINE__); 1395 return -ENOMEM; 1396 } 1397 1398 /* Fill in the data and return the structure to the calling 1399 * program 1400 */ 1401 1402 /* struct mpt_ioctl_targetinfo does not contain sufficient space 1403 * for the target structures so when the IOCTL is called, there is 1404 * not sufficient stack space for the structure. Allocate memory, 1405 * populate the memory, copy back to the user, then free memory. 1406 * targetInfo format: 1407 * bits 31-24: reserved 1408 * 23-16: LUN 1409 * 15- 8: Bus Number 1410 * 7- 0: Target ID 1411 */ 1412 pmem = kzalloc(numBytes, GFP_KERNEL); 1413 if (!pmem) { 1414 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_gettargetinfo() - no memory available!\n", 1415 ioc->name, __FILE__, __LINE__); 1416 return -ENOMEM; 1417 } 1418 pdata = (int *) pmem; 1419 1420 /* Get number of devices 1421 */ 1422 if (ioc->sh){ 1423 shost_for_each_device(sdev, ioc->sh) { 1424 if (!maxWordsLeft) 1425 continue; 1426 vdevice = sdev->hostdata; 1427 if (vdevice == NULL || vdevice->vtarget == NULL) 1428 continue; 1429 if (vdevice->vtarget->tflags & 1430 MPT_TARGET_FLAGS_RAID_COMPONENT) 1431 continue; 1432 lun = (vdevice->vtarget->raidVolume) ? 0x80 : vdevice->lun; 1433 *pdata = (((u8)lun << 16) + (vdevice->vtarget->channel << 8) + 1434 (vdevice->vtarget->id )); 1435 pdata++; 1436 numDevices++; 1437 --maxWordsLeft; 1438 } 1439 } 1440 karg.numDevices = numDevices; 1441 1442 /* Copy part of the data from kernel memory to user memory 1443 */ 1444 if (copy_to_user((char __user *)arg, &karg, 1445 sizeof(struct mpt_ioctl_targetinfo))) { 1446 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_gettargetinfo - " 1447 "Unable to write out mpt_ioctl_targetinfo struct @ %p\n", 1448 ioc->name, __FILE__, __LINE__, uarg); 1449 kfree(pmem); 1450 return -EFAULT; 1451 } 1452 1453 /* Copy the remaining data from kernel memory to user memory 1454 */ 1455 if (copy_to_user(uarg->targetInfo, pmem, numBytes)) { 1456 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_gettargetinfo - " 1457 "Unable to write out mpt_ioctl_targetinfo struct @ %p\n", 1458 ioc->name, __FILE__, __LINE__, pdata); 1459 kfree(pmem); 1460 return -EFAULT; 1461 } 1462 1463 kfree(pmem); 1464 1465 return 0; 1466 } 1467 1468 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1469 /* MPT IOCTL Test function. 1470 * 1471 * Outputs: None. 1472 * Return: 0 if successful 1473 * -EFAULT if data unavailable 1474 * -ENODEV if no such device/adapter 1475 */ 1476 static int 1477 mptctl_readtest (MPT_ADAPTER *ioc, unsigned long arg) 1478 { 1479 struct mpt_ioctl_test __user *uarg = (void __user *) arg; 1480 struct mpt_ioctl_test karg; 1481 1482 if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_test))) { 1483 printk(KERN_ERR MYNAM "%s@%d::mptctl_readtest - " 1484 "Unable to read in mpt_ioctl_test struct @ %p\n", 1485 __FILE__, __LINE__, uarg); 1486 return -EFAULT; 1487 } 1488 1489 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_readtest called.\n", 1490 ioc->name)); 1491 /* Fill in the data and return the structure to the calling 1492 * program 1493 */ 1494 1495 #ifdef MFCNT 1496 karg.chip_type = ioc->mfcnt; 1497 #else 1498 karg.chip_type = ioc->pcidev->device; 1499 #endif 1500 strncpy (karg.name, ioc->name, MPT_MAX_NAME); 1501 karg.name[MPT_MAX_NAME-1]='\0'; 1502 strncpy (karg.product, ioc->prod_name, MPT_PRODUCT_LENGTH); 1503 karg.product[MPT_PRODUCT_LENGTH-1]='\0'; 1504 1505 /* Copy the data from kernel memory to user memory 1506 */ 1507 if (copy_to_user((char __user *)arg, &karg, sizeof(struct mpt_ioctl_test))) { 1508 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_readtest - " 1509 "Unable to write out mpt_ioctl_test struct @ %p\n", 1510 ioc->name, __FILE__, __LINE__, uarg); 1511 return -EFAULT; 1512 } 1513 1514 return 0; 1515 } 1516 1517 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1518 /* 1519 * mptctl_eventquery - Query the host adapter for the event types 1520 * that are being logged. 1521 * @arg: User space argument 1522 * 1523 * Outputs: None. 1524 * Return: 0 if successful 1525 * -EFAULT if data unavailable 1526 * -ENODEV if no such device/adapter 1527 */ 1528 static int 1529 mptctl_eventquery (MPT_ADAPTER *ioc, unsigned long arg) 1530 { 1531 struct mpt_ioctl_eventquery __user *uarg = (void __user *) arg; 1532 struct mpt_ioctl_eventquery karg; 1533 1534 if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_eventquery))) { 1535 printk(KERN_ERR MYNAM "%s@%d::mptctl_eventquery - " 1536 "Unable to read in mpt_ioctl_eventquery struct @ %p\n", 1537 __FILE__, __LINE__, uarg); 1538 return -EFAULT; 1539 } 1540 1541 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_eventquery called.\n", 1542 ioc->name)); 1543 karg.eventEntries = MPTCTL_EVENT_LOG_SIZE; 1544 karg.eventTypes = ioc->eventTypes; 1545 1546 /* Copy the data from kernel memory to user memory 1547 */ 1548 if (copy_to_user((char __user *)arg, &karg, sizeof(struct mpt_ioctl_eventquery))) { 1549 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_eventquery - " 1550 "Unable to write out mpt_ioctl_eventquery struct @ %p\n", 1551 ioc->name, __FILE__, __LINE__, uarg); 1552 return -EFAULT; 1553 } 1554 return 0; 1555 } 1556 1557 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1558 static int 1559 mptctl_eventenable (MPT_ADAPTER *ioc, unsigned long arg) 1560 { 1561 struct mpt_ioctl_eventenable __user *uarg = (void __user *) arg; 1562 struct mpt_ioctl_eventenable karg; 1563 1564 if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_eventenable))) { 1565 printk(KERN_ERR MYNAM "%s@%d::mptctl_eventenable - " 1566 "Unable to read in mpt_ioctl_eventenable struct @ %p\n", 1567 __FILE__, __LINE__, uarg); 1568 return -EFAULT; 1569 } 1570 1571 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_eventenable called.\n", 1572 ioc->name)); 1573 if (ioc->events == NULL) { 1574 /* Have not yet allocated memory - do so now. 1575 */ 1576 int sz = MPTCTL_EVENT_LOG_SIZE * sizeof(MPT_IOCTL_EVENTS); 1577 ioc->events = kzalloc(sz, GFP_KERNEL); 1578 if (!ioc->events) { 1579 printk(MYIOC_s_ERR_FMT 1580 ": ERROR - Insufficient memory to add adapter!\n", 1581 ioc->name); 1582 return -ENOMEM; 1583 } 1584 ioc->alloc_total += sz; 1585 1586 ioc->eventContext = 0; 1587 } 1588 1589 /* Update the IOC event logging flag. 1590 */ 1591 ioc->eventTypes = karg.eventTypes; 1592 1593 return 0; 1594 } 1595 1596 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1597 static int 1598 mptctl_eventreport (MPT_ADAPTER *ioc, unsigned long arg) 1599 { 1600 struct mpt_ioctl_eventreport __user *uarg = (void __user *) arg; 1601 struct mpt_ioctl_eventreport karg; 1602 int numBytes, maxEvents, max; 1603 1604 if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_eventreport))) { 1605 printk(KERN_ERR MYNAM "%s@%d::mptctl_eventreport - " 1606 "Unable to read in mpt_ioctl_eventreport struct @ %p\n", 1607 __FILE__, __LINE__, uarg); 1608 return -EFAULT; 1609 } 1610 1611 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_eventreport called.\n", 1612 ioc->name)); 1613 1614 numBytes = karg.hdr.maxDataSize - sizeof(mpt_ioctl_header); 1615 maxEvents = numBytes/sizeof(MPT_IOCTL_EVENTS); 1616 1617 1618 max = MPTCTL_EVENT_LOG_SIZE < maxEvents ? MPTCTL_EVENT_LOG_SIZE : maxEvents; 1619 1620 /* If fewer than 1 event is requested, there must have 1621 * been some type of error. 1622 */ 1623 if ((max < 1) || !ioc->events) 1624 return -ENODATA; 1625 1626 /* reset this flag so SIGIO can restart */ 1627 ioc->aen_event_read_flag=0; 1628 1629 /* Copy the data from kernel memory to user memory 1630 */ 1631 numBytes = max * sizeof(MPT_IOCTL_EVENTS); 1632 if (copy_to_user(uarg->eventData, ioc->events, numBytes)) { 1633 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_eventreport - " 1634 "Unable to write out mpt_ioctl_eventreport struct @ %p\n", 1635 ioc->name, __FILE__, __LINE__, ioc->events); 1636 return -EFAULT; 1637 } 1638 1639 return 0; 1640 } 1641 1642 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1643 static int 1644 mptctl_replace_fw (MPT_ADAPTER *ioc, unsigned long arg) 1645 { 1646 struct mpt_ioctl_replace_fw __user *uarg = (void __user *) arg; 1647 struct mpt_ioctl_replace_fw karg; 1648 int newFwSize; 1649 1650 if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_replace_fw))) { 1651 printk(KERN_ERR MYNAM "%s@%d::mptctl_replace_fw - " 1652 "Unable to read in mpt_ioctl_replace_fw struct @ %p\n", 1653 __FILE__, __LINE__, uarg); 1654 return -EFAULT; 1655 } 1656 1657 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_replace_fw called.\n", 1658 ioc->name)); 1659 /* If caching FW, Free the old FW image 1660 */ 1661 if (ioc->cached_fw == NULL) 1662 return 0; 1663 1664 mpt_free_fw_memory(ioc); 1665 1666 /* Allocate memory for the new FW image 1667 */ 1668 newFwSize = ALIGN(karg.newImageSize, 4); 1669 1670 mpt_alloc_fw_memory(ioc, newFwSize); 1671 if (ioc->cached_fw == NULL) 1672 return -ENOMEM; 1673 1674 /* Copy the data from user memory to kernel space 1675 */ 1676 if (copy_from_user(ioc->cached_fw, uarg->newImage, newFwSize)) { 1677 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_replace_fw - " 1678 "Unable to read in mpt_ioctl_replace_fw image " 1679 "@ %p\n", ioc->name, __FILE__, __LINE__, uarg); 1680 mpt_free_fw_memory(ioc); 1681 return -EFAULT; 1682 } 1683 1684 /* Update IOCFactsReply 1685 */ 1686 ioc->facts.FWImageSize = newFwSize; 1687 return 0; 1688 } 1689 1690 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1691 /* MPT IOCTL MPTCOMMAND function. 1692 * Cast the arg into the mpt_ioctl_mpt_command structure. 1693 * 1694 * Outputs: None. 1695 * Return: 0 if successful 1696 * -EBUSY if previous command timeout and IOC reset is not complete. 1697 * -EFAULT if data unavailable 1698 * -ENODEV if no such device/adapter 1699 * -ETIME if timer expires 1700 * -ENOMEM if memory allocation error 1701 */ 1702 static int 1703 mptctl_mpt_command (MPT_ADAPTER *ioc, unsigned long arg) 1704 { 1705 struct mpt_ioctl_command __user *uarg = (void __user *) arg; 1706 struct mpt_ioctl_command karg; 1707 int rc; 1708 1709 1710 if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_command))) { 1711 printk(KERN_ERR MYNAM "%s@%d::mptctl_mpt_command - " 1712 "Unable to read in mpt_ioctl_command struct @ %p\n", 1713 __FILE__, __LINE__, uarg); 1714 return -EFAULT; 1715 } 1716 1717 rc = mptctl_do_mpt_command (ioc, karg, &uarg->MF); 1718 1719 return rc; 1720 } 1721 1722 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1723 /* Worker routine for the IOCTL MPTCOMMAND and MPTCOMMAND32 (sparc) commands. 1724 * 1725 * Outputs: None. 1726 * Return: 0 if successful 1727 * -EBUSY if previous command timeout and IOC reset is not complete. 1728 * -EFAULT if data unavailable 1729 * -ENODEV if no such device/adapter 1730 * -ETIME if timer expires 1731 * -ENOMEM if memory allocation error 1732 * -EPERM if SCSI I/O and target is untagged 1733 */ 1734 static int 1735 mptctl_do_mpt_command (MPT_ADAPTER *ioc, struct mpt_ioctl_command karg, void __user *mfPtr) 1736 { 1737 MPT_FRAME_HDR *mf = NULL; 1738 MPIHeader_t *hdr; 1739 char *psge; 1740 struct buflist bufIn; /* data In buffer */ 1741 struct buflist bufOut; /* data Out buffer */ 1742 dma_addr_t dma_addr_in; 1743 dma_addr_t dma_addr_out; 1744 int sgSize = 0; /* Num SG elements */ 1745 int flagsLength; 1746 int sz, rc = 0; 1747 int msgContext; 1748 u16 req_idx; 1749 ulong timeout; 1750 unsigned long timeleft; 1751 struct scsi_device *sdev; 1752 unsigned long flags; 1753 u8 function; 1754 1755 /* bufIn and bufOut are used for user to kernel space transfers 1756 */ 1757 bufIn.kptr = bufOut.kptr = NULL; 1758 bufIn.len = bufOut.len = 0; 1759 1760 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 1761 if (ioc->ioc_reset_in_progress) { 1762 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 1763 printk(KERN_ERR MYNAM "%s@%d::mptctl_do_mpt_command - " 1764 "Busy with diagnostic reset\n", __FILE__, __LINE__); 1765 return -EBUSY; 1766 } 1767 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 1768 1769 /* Basic sanity checks to prevent underflows or integer overflows */ 1770 if (karg.maxReplyBytes < 0 || 1771 karg.dataInSize < 0 || 1772 karg.dataOutSize < 0 || 1773 karg.dataSgeOffset < 0 || 1774 karg.maxSenseBytes < 0 || 1775 karg.dataSgeOffset > ioc->req_sz / 4) 1776 return -EINVAL; 1777 1778 /* Verify that the final request frame will not be too large. 1779 */ 1780 sz = karg.dataSgeOffset * 4; 1781 if (karg.dataInSize > 0) 1782 sz += ioc->SGE_size; 1783 if (karg.dataOutSize > 0) 1784 sz += ioc->SGE_size; 1785 1786 if (sz > ioc->req_sz) { 1787 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - " 1788 "Request frame too large (%d) maximum (%d)\n", 1789 ioc->name, __FILE__, __LINE__, sz, ioc->req_sz); 1790 return -EFAULT; 1791 } 1792 1793 /* Get a free request frame and save the message context. 1794 */ 1795 if ((mf = mpt_get_msg_frame(mptctl_id, ioc)) == NULL) 1796 return -EAGAIN; 1797 1798 hdr = (MPIHeader_t *) mf; 1799 msgContext = le32_to_cpu(hdr->MsgContext); 1800 req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx); 1801 1802 /* Copy the request frame 1803 * Reset the saved message context. 1804 * Request frame in user space 1805 */ 1806 if (copy_from_user(mf, mfPtr, karg.dataSgeOffset * 4)) { 1807 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - " 1808 "Unable to read MF from mpt_ioctl_command struct @ %p\n", 1809 ioc->name, __FILE__, __LINE__, mfPtr); 1810 function = -1; 1811 rc = -EFAULT; 1812 goto done_free_mem; 1813 } 1814 hdr->MsgContext = cpu_to_le32(msgContext); 1815 function = hdr->Function; 1816 1817 1818 /* Verify that this request is allowed. 1819 */ 1820 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "sending mpi function (0x%02X), req=%p\n", 1821 ioc->name, hdr->Function, mf)); 1822 1823 switch (function) { 1824 case MPI_FUNCTION_IOC_FACTS: 1825 case MPI_FUNCTION_PORT_FACTS: 1826 karg.dataOutSize = karg.dataInSize = 0; 1827 break; 1828 1829 case MPI_FUNCTION_CONFIG: 1830 { 1831 Config_t *config_frame; 1832 config_frame = (Config_t *)mf; 1833 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "\ttype=0x%02x ext_type=0x%02x " 1834 "number=0x%02x action=0x%02x\n", ioc->name, 1835 config_frame->Header.PageType, 1836 config_frame->ExtPageType, 1837 config_frame->Header.PageNumber, 1838 config_frame->Action)); 1839 break; 1840 } 1841 1842 case MPI_FUNCTION_FC_COMMON_TRANSPORT_SEND: 1843 case MPI_FUNCTION_FC_EX_LINK_SRVC_SEND: 1844 case MPI_FUNCTION_FW_UPLOAD: 1845 case MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR: 1846 case MPI_FUNCTION_FW_DOWNLOAD: 1847 case MPI_FUNCTION_FC_PRIMITIVE_SEND: 1848 case MPI_FUNCTION_TOOLBOX: 1849 case MPI_FUNCTION_SAS_IO_UNIT_CONTROL: 1850 break; 1851 1852 case MPI_FUNCTION_SCSI_IO_REQUEST: 1853 if (ioc->sh) { 1854 SCSIIORequest_t *pScsiReq = (SCSIIORequest_t *) mf; 1855 int qtag = MPI_SCSIIO_CONTROL_UNTAGGED; 1856 int scsidir = 0; 1857 int dataSize; 1858 u32 id; 1859 1860 id = (ioc->devices_per_bus == 0) ? 256 : ioc->devices_per_bus; 1861 if (pScsiReq->TargetID > id) { 1862 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - " 1863 "Target ID out of bounds. \n", 1864 ioc->name, __FILE__, __LINE__); 1865 rc = -ENODEV; 1866 goto done_free_mem; 1867 } 1868 1869 if (pScsiReq->Bus >= ioc->number_of_buses) { 1870 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - " 1871 "Target Bus out of bounds. \n", 1872 ioc->name, __FILE__, __LINE__); 1873 rc = -ENODEV; 1874 goto done_free_mem; 1875 } 1876 1877 pScsiReq->MsgFlags &= ~MPI_SCSIIO_MSGFLGS_SENSE_WIDTH; 1878 pScsiReq->MsgFlags |= mpt_msg_flags(ioc); 1879 1880 1881 /* verify that app has not requested 1882 * more sense data than driver 1883 * can provide, if so, reset this parameter 1884 * set the sense buffer pointer low address 1885 * update the control field to specify Q type 1886 */ 1887 if (karg.maxSenseBytes > MPT_SENSE_BUFFER_SIZE) 1888 pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE; 1889 else 1890 pScsiReq->SenseBufferLength = karg.maxSenseBytes; 1891 1892 pScsiReq->SenseBufferLowAddr = 1893 cpu_to_le32(ioc->sense_buf_low_dma 1894 + (req_idx * MPT_SENSE_BUFFER_ALLOC)); 1895 1896 shost_for_each_device(sdev, ioc->sh) { 1897 struct scsi_target *starget = scsi_target(sdev); 1898 VirtTarget *vtarget = starget->hostdata; 1899 1900 if (vtarget == NULL) 1901 continue; 1902 1903 if ((pScsiReq->TargetID == vtarget->id) && 1904 (pScsiReq->Bus == vtarget->channel) && 1905 (vtarget->tflags & MPT_TARGET_FLAGS_Q_YES)) 1906 qtag = MPI_SCSIIO_CONTROL_SIMPLEQ; 1907 } 1908 1909 /* Have the IOCTL driver set the direction based 1910 * on the dataOutSize (ordering issue with Sparc). 1911 */ 1912 if (karg.dataOutSize > 0) { 1913 scsidir = MPI_SCSIIO_CONTROL_WRITE; 1914 dataSize = karg.dataOutSize; 1915 } else { 1916 scsidir = MPI_SCSIIO_CONTROL_READ; 1917 dataSize = karg.dataInSize; 1918 } 1919 1920 pScsiReq->Control = cpu_to_le32(scsidir | qtag); 1921 pScsiReq->DataLength = cpu_to_le32(dataSize); 1922 1923 1924 } else { 1925 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - " 1926 "SCSI driver is not loaded. \n", 1927 ioc->name, __FILE__, __LINE__); 1928 rc = -EFAULT; 1929 goto done_free_mem; 1930 } 1931 break; 1932 1933 case MPI_FUNCTION_SMP_PASSTHROUGH: 1934 /* Check mf->PassthruFlags to determine if 1935 * transfer is ImmediateMode or not. 1936 * Immediate mode returns data in the ReplyFrame. 1937 * Else, we are sending request and response data 1938 * in two SGLs at the end of the mf. 1939 */ 1940 break; 1941 1942 case MPI_FUNCTION_SATA_PASSTHROUGH: 1943 if (!ioc->sh) { 1944 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - " 1945 "SCSI driver is not loaded. \n", 1946 ioc->name, __FILE__, __LINE__); 1947 rc = -EFAULT; 1948 goto done_free_mem; 1949 } 1950 break; 1951 1952 case MPI_FUNCTION_RAID_ACTION: 1953 /* Just add a SGE 1954 */ 1955 break; 1956 1957 case MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH: 1958 if (ioc->sh) { 1959 SCSIIORequest_t *pScsiReq = (SCSIIORequest_t *) mf; 1960 int qtag = MPI_SCSIIO_CONTROL_SIMPLEQ; 1961 int scsidir = MPI_SCSIIO_CONTROL_READ; 1962 int dataSize; 1963 1964 pScsiReq->MsgFlags &= ~MPI_SCSIIO_MSGFLGS_SENSE_WIDTH; 1965 pScsiReq->MsgFlags |= mpt_msg_flags(ioc); 1966 1967 1968 /* verify that app has not requested 1969 * more sense data than driver 1970 * can provide, if so, reset this parameter 1971 * set the sense buffer pointer low address 1972 * update the control field to specify Q type 1973 */ 1974 if (karg.maxSenseBytes > MPT_SENSE_BUFFER_SIZE) 1975 pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE; 1976 else 1977 pScsiReq->SenseBufferLength = karg.maxSenseBytes; 1978 1979 pScsiReq->SenseBufferLowAddr = 1980 cpu_to_le32(ioc->sense_buf_low_dma 1981 + (req_idx * MPT_SENSE_BUFFER_ALLOC)); 1982 1983 /* All commands to physical devices are tagged 1984 */ 1985 1986 /* Have the IOCTL driver set the direction based 1987 * on the dataOutSize (ordering issue with Sparc). 1988 */ 1989 if (karg.dataOutSize > 0) { 1990 scsidir = MPI_SCSIIO_CONTROL_WRITE; 1991 dataSize = karg.dataOutSize; 1992 } else { 1993 scsidir = MPI_SCSIIO_CONTROL_READ; 1994 dataSize = karg.dataInSize; 1995 } 1996 1997 pScsiReq->Control = cpu_to_le32(scsidir | qtag); 1998 pScsiReq->DataLength = cpu_to_le32(dataSize); 1999 2000 } else { 2001 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - " 2002 "SCSI driver is not loaded. \n", 2003 ioc->name, __FILE__, __LINE__); 2004 rc = -EFAULT; 2005 goto done_free_mem; 2006 } 2007 break; 2008 2009 case MPI_FUNCTION_SCSI_TASK_MGMT: 2010 { 2011 SCSITaskMgmt_t *pScsiTm; 2012 pScsiTm = (SCSITaskMgmt_t *)mf; 2013 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2014 "\tTaskType=0x%x MsgFlags=0x%x " 2015 "TaskMsgContext=0x%x id=%d channel=%d\n", 2016 ioc->name, pScsiTm->TaskType, le32_to_cpu 2017 (pScsiTm->TaskMsgContext), pScsiTm->MsgFlags, 2018 pScsiTm->TargetID, pScsiTm->Bus)); 2019 break; 2020 } 2021 2022 case MPI_FUNCTION_IOC_INIT: 2023 { 2024 IOCInit_t *pInit = (IOCInit_t *) mf; 2025 u32 high_addr, sense_high; 2026 2027 /* Verify that all entries in the IOC INIT match 2028 * existing setup (and in LE format). 2029 */ 2030 if (sizeof(dma_addr_t) == sizeof(u64)) { 2031 high_addr = cpu_to_le32((u32)((u64)ioc->req_frames_dma >> 32)); 2032 sense_high= cpu_to_le32((u32)((u64)ioc->sense_buf_pool_dma >> 32)); 2033 } else { 2034 high_addr = 0; 2035 sense_high= 0; 2036 } 2037 2038 if ((pInit->Flags != 0) || (pInit->MaxDevices != ioc->facts.MaxDevices) || 2039 (pInit->MaxBuses != ioc->facts.MaxBuses) || 2040 (pInit->ReplyFrameSize != cpu_to_le16(ioc->reply_sz)) || 2041 (pInit->HostMfaHighAddr != high_addr) || 2042 (pInit->SenseBufferHighAddr != sense_high)) { 2043 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - " 2044 "IOC_INIT issued with 1 or more incorrect parameters. Rejected.\n", 2045 ioc->name, __FILE__, __LINE__); 2046 rc = -EFAULT; 2047 goto done_free_mem; 2048 } 2049 } 2050 break; 2051 default: 2052 /* 2053 * MPI_FUNCTION_PORT_ENABLE 2054 * MPI_FUNCTION_TARGET_CMD_BUFFER_POST 2055 * MPI_FUNCTION_TARGET_ASSIST 2056 * MPI_FUNCTION_TARGET_STATUS_SEND 2057 * MPI_FUNCTION_TARGET_MODE_ABORT 2058 * MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET 2059 * MPI_FUNCTION_IO_UNIT_RESET 2060 * MPI_FUNCTION_HANDSHAKE 2061 * MPI_FUNCTION_REPLY_FRAME_REMOVAL 2062 * MPI_FUNCTION_EVENT_NOTIFICATION 2063 * (driver handles event notification) 2064 * MPI_FUNCTION_EVENT_ACK 2065 */ 2066 2067 /* What to do with these??? CHECK ME!!! 2068 MPI_FUNCTION_FC_LINK_SRVC_BUF_POST 2069 MPI_FUNCTION_FC_LINK_SRVC_RSP 2070 MPI_FUNCTION_FC_ABORT 2071 MPI_FUNCTION_LAN_SEND 2072 MPI_FUNCTION_LAN_RECEIVE 2073 MPI_FUNCTION_LAN_RESET 2074 */ 2075 2076 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - " 2077 "Illegal request (function 0x%x) \n", 2078 ioc->name, __FILE__, __LINE__, hdr->Function); 2079 rc = -EFAULT; 2080 goto done_free_mem; 2081 } 2082 2083 /* Add the SGL ( at most one data in SGE and one data out SGE ) 2084 * In the case of two SGE's - the data out (write) will always 2085 * preceede the data in (read) SGE. psgList is used to free the 2086 * allocated memory. 2087 */ 2088 psge = (char *) (((int *) mf) + karg.dataSgeOffset); 2089 flagsLength = 0; 2090 2091 if (karg.dataOutSize > 0) 2092 sgSize ++; 2093 2094 if (karg.dataInSize > 0) 2095 sgSize ++; 2096 2097 if (sgSize > 0) { 2098 2099 /* Set up the dataOut memory allocation */ 2100 if (karg.dataOutSize > 0) { 2101 if (karg.dataInSize > 0) { 2102 flagsLength = ( MPI_SGE_FLAGS_SIMPLE_ELEMENT | 2103 MPI_SGE_FLAGS_END_OF_BUFFER | 2104 MPI_SGE_FLAGS_DIRECTION) 2105 << MPI_SGE_FLAGS_SHIFT; 2106 } else { 2107 flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE; 2108 } 2109 flagsLength |= karg.dataOutSize; 2110 bufOut.len = karg.dataOutSize; 2111 bufOut.kptr = pci_alloc_consistent( 2112 ioc->pcidev, bufOut.len, &dma_addr_out); 2113 2114 if (bufOut.kptr == NULL) { 2115 rc = -ENOMEM; 2116 goto done_free_mem; 2117 } else { 2118 /* Set up this SGE. 2119 * Copy to MF and to sglbuf 2120 */ 2121 ioc->add_sge(psge, flagsLength, dma_addr_out); 2122 psge += ioc->SGE_size; 2123 2124 /* Copy user data to kernel space. 2125 */ 2126 if (copy_from_user(bufOut.kptr, 2127 karg.dataOutBufPtr, 2128 bufOut.len)) { 2129 printk(MYIOC_s_ERR_FMT 2130 "%s@%d::mptctl_do_mpt_command - Unable " 2131 "to read user data " 2132 "struct @ %p\n", 2133 ioc->name, __FILE__, __LINE__,karg.dataOutBufPtr); 2134 rc = -EFAULT; 2135 goto done_free_mem; 2136 } 2137 } 2138 } 2139 2140 if (karg.dataInSize > 0) { 2141 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ; 2142 flagsLength |= karg.dataInSize; 2143 2144 bufIn.len = karg.dataInSize; 2145 bufIn.kptr = pci_alloc_consistent(ioc->pcidev, 2146 bufIn.len, &dma_addr_in); 2147 2148 if (bufIn.kptr == NULL) { 2149 rc = -ENOMEM; 2150 goto done_free_mem; 2151 } else { 2152 /* Set up this SGE 2153 * Copy to MF and to sglbuf 2154 */ 2155 ioc->add_sge(psge, flagsLength, dma_addr_in); 2156 } 2157 } 2158 } else { 2159 /* Add a NULL SGE 2160 */ 2161 ioc->add_sge(psge, flagsLength, (dma_addr_t) -1); 2162 } 2163 2164 SET_MGMT_MSG_CONTEXT(ioc->ioctl_cmds.msg_context, hdr->MsgContext); 2165 INITIALIZE_MGMT_STATUS(ioc->ioctl_cmds.status) 2166 if (hdr->Function == MPI_FUNCTION_SCSI_TASK_MGMT) { 2167 2168 mutex_lock(&ioc->taskmgmt_cmds.mutex); 2169 if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) { 2170 mutex_unlock(&ioc->taskmgmt_cmds.mutex); 2171 goto done_free_mem; 2172 } 2173 2174 DBG_DUMP_TM_REQUEST_FRAME(ioc, (u32 *)mf); 2175 2176 if ((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) && 2177 (ioc->facts.MsgVersion >= MPI_VERSION_01_05)) 2178 mpt_put_msg_frame_hi_pri(mptctl_id, ioc, mf); 2179 else { 2180 rc =mpt_send_handshake_request(mptctl_id, ioc, 2181 sizeof(SCSITaskMgmt_t), (u32*)mf, CAN_SLEEP); 2182 if (rc != 0) { 2183 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT 2184 "send_handshake FAILED! (ioc %p, mf %p)\n", 2185 ioc->name, ioc, mf)); 2186 mpt_clear_taskmgmt_in_progress_flag(ioc); 2187 rc = -ENODATA; 2188 mutex_unlock(&ioc->taskmgmt_cmds.mutex); 2189 goto done_free_mem; 2190 } 2191 } 2192 2193 } else 2194 mpt_put_msg_frame(mptctl_id, ioc, mf); 2195 2196 /* Now wait for the command to complete */ 2197 timeout = (karg.timeout > 0) ? karg.timeout : MPT_IOCTL_DEFAULT_TIMEOUT; 2198 retry_wait: 2199 timeleft = wait_for_completion_timeout(&ioc->ioctl_cmds.done, 2200 HZ*timeout); 2201 if (!(ioc->ioctl_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { 2202 rc = -ETIME; 2203 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT "%s: TIMED OUT!\n", 2204 ioc->name, __func__)); 2205 if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) { 2206 if (function == MPI_FUNCTION_SCSI_TASK_MGMT) 2207 mutex_unlock(&ioc->taskmgmt_cmds.mutex); 2208 goto done_free_mem; 2209 } 2210 if (!timeleft) { 2211 printk(MYIOC_s_WARN_FMT 2212 "mpt cmd timeout, doorbell=0x%08x" 2213 " function=0x%x\n", 2214 ioc->name, mpt_GetIocState(ioc, 0), function); 2215 if (function == MPI_FUNCTION_SCSI_TASK_MGMT) 2216 mutex_unlock(&ioc->taskmgmt_cmds.mutex); 2217 mptctl_timeout_expired(ioc, mf); 2218 mf = NULL; 2219 } else 2220 goto retry_wait; 2221 goto done_free_mem; 2222 } 2223 2224 if (function == MPI_FUNCTION_SCSI_TASK_MGMT) 2225 mutex_unlock(&ioc->taskmgmt_cmds.mutex); 2226 2227 2228 mf = NULL; 2229 2230 /* If a valid reply frame, copy to the user. 2231 * Offset 2: reply length in U32's 2232 */ 2233 if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_RF_VALID) { 2234 if (karg.maxReplyBytes < ioc->reply_sz) { 2235 sz = min(karg.maxReplyBytes, 2236 4*ioc->ioctl_cmds.reply[2]); 2237 } else { 2238 sz = min(ioc->reply_sz, 4*ioc->ioctl_cmds.reply[2]); 2239 } 2240 if (sz > 0) { 2241 if (copy_to_user(karg.replyFrameBufPtr, 2242 ioc->ioctl_cmds.reply, sz)){ 2243 printk(MYIOC_s_ERR_FMT 2244 "%s@%d::mptctl_do_mpt_command - " 2245 "Unable to write out reply frame %p\n", 2246 ioc->name, __FILE__, __LINE__, karg.replyFrameBufPtr); 2247 rc = -ENODATA; 2248 goto done_free_mem; 2249 } 2250 } 2251 } 2252 2253 /* If valid sense data, copy to user. 2254 */ 2255 if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_SENSE_VALID) { 2256 sz = min(karg.maxSenseBytes, MPT_SENSE_BUFFER_SIZE); 2257 if (sz > 0) { 2258 if (copy_to_user(karg.senseDataPtr, 2259 ioc->ioctl_cmds.sense, sz)) { 2260 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - " 2261 "Unable to write sense data to user %p\n", 2262 ioc->name, __FILE__, __LINE__, 2263 karg.senseDataPtr); 2264 rc = -ENODATA; 2265 goto done_free_mem; 2266 } 2267 } 2268 } 2269 2270 /* If the overall status is _GOOD and data in, copy data 2271 * to user. 2272 */ 2273 if ((ioc->ioctl_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD) && 2274 (karg.dataInSize > 0) && (bufIn.kptr)) { 2275 2276 if (copy_to_user(karg.dataInBufPtr, 2277 bufIn.kptr, karg.dataInSize)) { 2278 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - " 2279 "Unable to write data to user %p\n", 2280 ioc->name, __FILE__, __LINE__, 2281 karg.dataInBufPtr); 2282 rc = -ENODATA; 2283 } 2284 } 2285 2286 done_free_mem: 2287 2288 CLEAR_MGMT_STATUS(ioc->ioctl_cmds.status) 2289 SET_MGMT_MSG_CONTEXT(ioc->ioctl_cmds.msg_context, 0); 2290 2291 /* Free the allocated memory. 2292 */ 2293 if (bufOut.kptr != NULL) { 2294 pci_free_consistent(ioc->pcidev, 2295 bufOut.len, (void *) bufOut.kptr, dma_addr_out); 2296 } 2297 2298 if (bufIn.kptr != NULL) { 2299 pci_free_consistent(ioc->pcidev, 2300 bufIn.len, (void *) bufIn.kptr, dma_addr_in); 2301 } 2302 2303 /* mf is null if command issued successfully 2304 * otherwise, failure occurred after mf acquired. 2305 */ 2306 if (mf) 2307 mpt_free_msg_frame(ioc, mf); 2308 2309 return rc; 2310 } 2311 2312 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2313 /* Prototype Routine for the HOST INFO command. 2314 * 2315 * Outputs: None. 2316 * Return: 0 if successful 2317 * -EFAULT if data unavailable 2318 * -EBUSY if previous command timeout and IOC reset is not complete. 2319 * -ENODEV if no such device/adapter 2320 * -ETIME if timer expires 2321 * -ENOMEM if memory allocation error 2322 */ 2323 static int 2324 mptctl_hp_hostinfo(MPT_ADAPTER *ioc, unsigned long arg, unsigned int data_size) 2325 { 2326 hp_host_info_t __user *uarg = (void __user *) arg; 2327 struct pci_dev *pdev; 2328 char *pbuf=NULL; 2329 dma_addr_t buf_dma; 2330 hp_host_info_t karg; 2331 CONFIGPARMS cfg; 2332 ConfigPageHeader_t hdr; 2333 int rc, cim_rev; 2334 ToolboxIstwiReadWriteRequest_t *IstwiRWRequest; 2335 MPT_FRAME_HDR *mf = NULL; 2336 unsigned long timeleft; 2337 int retval; 2338 u32 msgcontext; 2339 2340 /* Reset long to int. Should affect IA64 and SPARC only 2341 */ 2342 if (data_size == sizeof(hp_host_info_t)) 2343 cim_rev = 1; 2344 else if (data_size == sizeof(hp_host_info_rev0_t)) 2345 cim_rev = 0; /* obsolete */ 2346 else 2347 return -EFAULT; 2348 2349 if (copy_from_user(&karg, uarg, sizeof(hp_host_info_t))) { 2350 printk(KERN_ERR MYNAM "%s@%d::mptctl_hp_host_info - " 2351 "Unable to read in hp_host_info struct @ %p\n", 2352 __FILE__, __LINE__, uarg); 2353 return -EFAULT; 2354 } 2355 2356 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": mptctl_hp_hostinfo called.\n", 2357 ioc->name)); 2358 2359 /* Fill in the data and return the structure to the calling 2360 * program 2361 */ 2362 pdev = (struct pci_dev *) ioc->pcidev; 2363 2364 karg.vendor = pdev->vendor; 2365 karg.device = pdev->device; 2366 karg.subsystem_id = pdev->subsystem_device; 2367 karg.subsystem_vendor = pdev->subsystem_vendor; 2368 karg.devfn = pdev->devfn; 2369 karg.bus = pdev->bus->number; 2370 2371 /* Save the SCSI host no. if 2372 * SCSI driver loaded 2373 */ 2374 if (ioc->sh != NULL) 2375 karg.host_no = ioc->sh->host_no; 2376 else 2377 karg.host_no = -1; 2378 2379 /* Reformat the fw_version into a string */ 2380 snprintf(karg.fw_version, sizeof(karg.fw_version), 2381 "%.2hhu.%.2hhu.%.2hhu.%.2hhu", 2382 ioc->facts.FWVersion.Struct.Major, 2383 ioc->facts.FWVersion.Struct.Minor, 2384 ioc->facts.FWVersion.Struct.Unit, 2385 ioc->facts.FWVersion.Struct.Dev); 2386 2387 /* Issue a config request to get the device serial number 2388 */ 2389 hdr.PageVersion = 0; 2390 hdr.PageLength = 0; 2391 hdr.PageNumber = 0; 2392 hdr.PageType = MPI_CONFIG_PAGETYPE_MANUFACTURING; 2393 cfg.cfghdr.hdr = &hdr; 2394 cfg.physAddr = -1; 2395 cfg.pageAddr = 0; 2396 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 2397 cfg.dir = 0; /* read */ 2398 cfg.timeout = 10; 2399 2400 strncpy(karg.serial_number, " ", 24); 2401 if (mpt_config(ioc, &cfg) == 0) { 2402 if (cfg.cfghdr.hdr->PageLength > 0) { 2403 /* Issue the second config page request */ 2404 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 2405 2406 pbuf = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, &buf_dma); 2407 if (pbuf) { 2408 cfg.physAddr = buf_dma; 2409 if (mpt_config(ioc, &cfg) == 0) { 2410 ManufacturingPage0_t *pdata = (ManufacturingPage0_t *) pbuf; 2411 if (strlen(pdata->BoardTracerNumber) > 1) { 2412 strlcpy(karg.serial_number, 2413 pdata->BoardTracerNumber, 24); 2414 } 2415 } 2416 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, pbuf, buf_dma); 2417 pbuf = NULL; 2418 } 2419 } 2420 } 2421 rc = mpt_GetIocState(ioc, 1); 2422 switch (rc) { 2423 case MPI_IOC_STATE_OPERATIONAL: 2424 karg.ioc_status = HP_STATUS_OK; 2425 break; 2426 2427 case MPI_IOC_STATE_FAULT: 2428 karg.ioc_status = HP_STATUS_FAILED; 2429 break; 2430 2431 case MPI_IOC_STATE_RESET: 2432 case MPI_IOC_STATE_READY: 2433 default: 2434 karg.ioc_status = HP_STATUS_OTHER; 2435 break; 2436 } 2437 2438 karg.base_io_addr = pci_resource_start(pdev, 0); 2439 2440 if ((ioc->bus_type == SAS) || (ioc->bus_type == FC)) 2441 karg.bus_phys_width = HP_BUS_WIDTH_UNK; 2442 else 2443 karg.bus_phys_width = HP_BUS_WIDTH_16; 2444 2445 karg.hard_resets = 0; 2446 karg.soft_resets = 0; 2447 karg.timeouts = 0; 2448 if (ioc->sh != NULL) { 2449 MPT_SCSI_HOST *hd = shost_priv(ioc->sh); 2450 2451 if (hd && (cim_rev == 1)) { 2452 karg.hard_resets = ioc->hard_resets; 2453 karg.soft_resets = ioc->soft_resets; 2454 karg.timeouts = ioc->timeouts; 2455 } 2456 } 2457 2458 /* 2459 * Gather ISTWI(Industry Standard Two Wire Interface) Data 2460 */ 2461 if ((mf = mpt_get_msg_frame(mptctl_id, ioc)) == NULL) { 2462 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT 2463 "%s, no msg frames!!\n", ioc->name, __func__)); 2464 goto out; 2465 } 2466 2467 IstwiRWRequest = (ToolboxIstwiReadWriteRequest_t *)mf; 2468 msgcontext = IstwiRWRequest->MsgContext; 2469 memset(IstwiRWRequest,0,sizeof(ToolboxIstwiReadWriteRequest_t)); 2470 IstwiRWRequest->MsgContext = msgcontext; 2471 IstwiRWRequest->Function = MPI_FUNCTION_TOOLBOX; 2472 IstwiRWRequest->Tool = MPI_TOOLBOX_ISTWI_READ_WRITE_TOOL; 2473 IstwiRWRequest->Flags = MPI_TB_ISTWI_FLAGS_READ; 2474 IstwiRWRequest->NumAddressBytes = 0x01; 2475 IstwiRWRequest->DataLength = cpu_to_le16(0x04); 2476 if (pdev->devfn & 1) 2477 IstwiRWRequest->DeviceAddr = 0xB2; 2478 else 2479 IstwiRWRequest->DeviceAddr = 0xB0; 2480 2481 pbuf = pci_alloc_consistent(ioc->pcidev, 4, &buf_dma); 2482 if (!pbuf) 2483 goto out; 2484 ioc->add_sge((char *)&IstwiRWRequest->SGL, 2485 (MPT_SGE_FLAGS_SSIMPLE_READ|4), buf_dma); 2486 2487 retval = 0; 2488 SET_MGMT_MSG_CONTEXT(ioc->ioctl_cmds.msg_context, 2489 IstwiRWRequest->MsgContext); 2490 INITIALIZE_MGMT_STATUS(ioc->ioctl_cmds.status) 2491 mpt_put_msg_frame(mptctl_id, ioc, mf); 2492 2493 retry_wait: 2494 timeleft = wait_for_completion_timeout(&ioc->ioctl_cmds.done, 2495 HZ*MPT_IOCTL_DEFAULT_TIMEOUT); 2496 if (!(ioc->ioctl_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { 2497 retval = -ETIME; 2498 printk(MYIOC_s_WARN_FMT "%s: failed\n", ioc->name, __func__); 2499 if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) { 2500 mpt_free_msg_frame(ioc, mf); 2501 goto out; 2502 } 2503 if (!timeleft) { 2504 printk(MYIOC_s_WARN_FMT 2505 "HOST INFO command timeout, doorbell=0x%08x\n", 2506 ioc->name, mpt_GetIocState(ioc, 0)); 2507 mptctl_timeout_expired(ioc, mf); 2508 } else 2509 goto retry_wait; 2510 goto out; 2511 } 2512 2513 /* 2514 *ISTWI Data Definition 2515 * pbuf[0] = FW_VERSION = 0x4 2516 * pbuf[1] = Bay Count = 6 or 4 or 2, depending on 2517 * the config, you should be seeing one out of these three values 2518 * pbuf[2] = Drive Installed Map = bit pattern depend on which 2519 * bays have drives in them 2520 * pbuf[3] = Checksum (0x100 = (byte0 + byte2 + byte3) 2521 */ 2522 if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_RF_VALID) 2523 karg.rsvd = *(u32 *)pbuf; 2524 2525 out: 2526 CLEAR_MGMT_STATUS(ioc->ioctl_cmds.status) 2527 SET_MGMT_MSG_CONTEXT(ioc->ioctl_cmds.msg_context, 0); 2528 2529 if (pbuf) 2530 pci_free_consistent(ioc->pcidev, 4, pbuf, buf_dma); 2531 2532 /* Copy the data from kernel memory to user memory 2533 */ 2534 if (copy_to_user((char __user *)arg, &karg, sizeof(hp_host_info_t))) { 2535 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_hpgethostinfo - " 2536 "Unable to write out hp_host_info @ %p\n", 2537 ioc->name, __FILE__, __LINE__, uarg); 2538 return -EFAULT; 2539 } 2540 2541 return 0; 2542 2543 } 2544 2545 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2546 /* Prototype Routine for the TARGET INFO command. 2547 * 2548 * Outputs: None. 2549 * Return: 0 if successful 2550 * -EFAULT if data unavailable 2551 * -EBUSY if previous command timeout and IOC reset is not complete. 2552 * -ENODEV if no such device/adapter 2553 * -ETIME if timer expires 2554 * -ENOMEM if memory allocation error 2555 */ 2556 static int 2557 mptctl_hp_targetinfo(MPT_ADAPTER *ioc, unsigned long arg) 2558 { 2559 hp_target_info_t __user *uarg = (void __user *) arg; 2560 SCSIDevicePage0_t *pg0_alloc; 2561 SCSIDevicePage3_t *pg3_alloc; 2562 MPT_SCSI_HOST *hd = NULL; 2563 hp_target_info_t karg; 2564 int data_sz; 2565 dma_addr_t page_dma; 2566 CONFIGPARMS cfg; 2567 ConfigPageHeader_t hdr; 2568 int tmp, np, rc = 0; 2569 2570 if (copy_from_user(&karg, uarg, sizeof(hp_target_info_t))) { 2571 printk(KERN_ERR MYNAM "%s@%d::mptctl_hp_targetinfo - " 2572 "Unable to read in hp_host_targetinfo struct @ %p\n", 2573 __FILE__, __LINE__, uarg); 2574 return -EFAULT; 2575 } 2576 2577 if (karg.hdr.id >= MPT_MAX_FC_DEVICES) 2578 return -EINVAL; 2579 dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_hp_targetinfo called.\n", 2580 ioc->name)); 2581 2582 /* There is nothing to do for FCP parts. 2583 */ 2584 if ((ioc->bus_type == SAS) || (ioc->bus_type == FC)) 2585 return 0; 2586 2587 if ((ioc->spi_data.sdp0length == 0) || (ioc->sh == NULL)) 2588 return 0; 2589 2590 if (ioc->sh->host_no != karg.hdr.host) 2591 return -ENODEV; 2592 2593 /* Get the data transfer speeds 2594 */ 2595 data_sz = ioc->spi_data.sdp0length * 4; 2596 pg0_alloc = (SCSIDevicePage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page_dma); 2597 if (pg0_alloc) { 2598 hdr.PageVersion = ioc->spi_data.sdp0version; 2599 hdr.PageLength = data_sz; 2600 hdr.PageNumber = 0; 2601 hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; 2602 2603 cfg.cfghdr.hdr = &hdr; 2604 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 2605 cfg.dir = 0; 2606 cfg.timeout = 0; 2607 cfg.physAddr = page_dma; 2608 2609 cfg.pageAddr = (karg.hdr.channel << 8) | karg.hdr.id; 2610 2611 if ((rc = mpt_config(ioc, &cfg)) == 0) { 2612 np = le32_to_cpu(pg0_alloc->NegotiatedParameters); 2613 karg.negotiated_width = np & MPI_SCSIDEVPAGE0_NP_WIDE ? 2614 HP_BUS_WIDTH_16 : HP_BUS_WIDTH_8; 2615 2616 if (np & MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK) { 2617 tmp = (np & MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK) >> 8; 2618 if (tmp < 0x09) 2619 karg.negotiated_speed = HP_DEV_SPEED_ULTRA320; 2620 else if (tmp <= 0x09) 2621 karg.negotiated_speed = HP_DEV_SPEED_ULTRA160; 2622 else if (tmp <= 0x0A) 2623 karg.negotiated_speed = HP_DEV_SPEED_ULTRA2; 2624 else if (tmp <= 0x0C) 2625 karg.negotiated_speed = HP_DEV_SPEED_ULTRA; 2626 else if (tmp <= 0x25) 2627 karg.negotiated_speed = HP_DEV_SPEED_FAST; 2628 else 2629 karg.negotiated_speed = HP_DEV_SPEED_ASYNC; 2630 } else 2631 karg.negotiated_speed = HP_DEV_SPEED_ASYNC; 2632 } 2633 2634 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) pg0_alloc, page_dma); 2635 } 2636 2637 /* Set defaults 2638 */ 2639 karg.message_rejects = -1; 2640 karg.phase_errors = -1; 2641 karg.parity_errors = -1; 2642 karg.select_timeouts = -1; 2643 2644 /* Get the target error parameters 2645 */ 2646 hdr.PageVersion = 0; 2647 hdr.PageLength = 0; 2648 hdr.PageNumber = 3; 2649 hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; 2650 2651 cfg.cfghdr.hdr = &hdr; 2652 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 2653 cfg.dir = 0; 2654 cfg.timeout = 0; 2655 cfg.physAddr = -1; 2656 if ((mpt_config(ioc, &cfg) == 0) && (cfg.cfghdr.hdr->PageLength > 0)) { 2657 /* Issue the second config page request */ 2658 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 2659 data_sz = (int) cfg.cfghdr.hdr->PageLength * 4; 2660 pg3_alloc = (SCSIDevicePage3_t *) pci_alloc_consistent( 2661 ioc->pcidev, data_sz, &page_dma); 2662 if (pg3_alloc) { 2663 cfg.physAddr = page_dma; 2664 cfg.pageAddr = (karg.hdr.channel << 8) | karg.hdr.id; 2665 if ((rc = mpt_config(ioc, &cfg)) == 0) { 2666 karg.message_rejects = (u32) le16_to_cpu(pg3_alloc->MsgRejectCount); 2667 karg.phase_errors = (u32) le16_to_cpu(pg3_alloc->PhaseErrorCount); 2668 karg.parity_errors = (u32) le16_to_cpu(pg3_alloc->ParityErrorCount); 2669 } 2670 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) pg3_alloc, page_dma); 2671 } 2672 } 2673 hd = shost_priv(ioc->sh); 2674 if (hd != NULL) 2675 karg.select_timeouts = hd->sel_timeout[karg.hdr.id]; 2676 2677 /* Copy the data from kernel memory to user memory 2678 */ 2679 if (copy_to_user((char __user *)arg, &karg, sizeof(hp_target_info_t))) { 2680 printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_hp_target_info - " 2681 "Unable to write out mpt_ioctl_targetinfo struct @ %p\n", 2682 ioc->name, __FILE__, __LINE__, uarg); 2683 return -EFAULT; 2684 } 2685 2686 return 0; 2687 } 2688 2689 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2690 2691 static const struct file_operations mptctl_fops = { 2692 .owner = THIS_MODULE, 2693 .llseek = no_llseek, 2694 .fasync = mptctl_fasync, 2695 .unlocked_ioctl = mptctl_ioctl, 2696 #ifdef CONFIG_COMPAT 2697 .compat_ioctl = compat_mpctl_ioctl, 2698 #endif 2699 }; 2700 2701 static struct miscdevice mptctl_miscdev = { 2702 MPT_MINOR, 2703 MYNAM, 2704 &mptctl_fops 2705 }; 2706 2707 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2708 2709 #ifdef CONFIG_COMPAT 2710 2711 static int 2712 compat_mptfwxfer_ioctl(struct file *filp, unsigned int cmd, 2713 unsigned long arg) 2714 { 2715 struct mpt_fw_xfer32 kfw32; 2716 struct mpt_fw_xfer kfw; 2717 MPT_ADAPTER *iocp = NULL; 2718 int iocnum, iocnumX; 2719 int nonblock = (filp->f_flags & O_NONBLOCK); 2720 int ret; 2721 2722 2723 if (copy_from_user(&kfw32, (char __user *)arg, sizeof(kfw32))) 2724 return -EFAULT; 2725 2726 /* Verify intended MPT adapter */ 2727 iocnumX = kfw32.iocnum & 0xFF; 2728 if (((iocnum = mpt_verify_adapter(iocnumX, &iocp)) < 0) || 2729 (iocp == NULL)) { 2730 printk(KERN_DEBUG MYNAM "::compat_mptfwxfer_ioctl @%d - ioc%d not found!\n", 2731 __LINE__, iocnumX); 2732 return -ENODEV; 2733 } 2734 2735 if ((ret = mptctl_syscall_down(iocp, nonblock)) != 0) 2736 return ret; 2737 2738 dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "compat_mptfwxfer_ioctl() called\n", 2739 iocp->name)); 2740 kfw.iocnum = iocnum; 2741 kfw.fwlen = kfw32.fwlen; 2742 kfw.bufp = compat_ptr(kfw32.bufp); 2743 2744 ret = mptctl_do_fw_download(iocp, kfw.bufp, kfw.fwlen); 2745 2746 mutex_unlock(&iocp->ioctl_cmds.mutex); 2747 2748 return ret; 2749 } 2750 2751 static int 2752 compat_mpt_command(struct file *filp, unsigned int cmd, 2753 unsigned long arg) 2754 { 2755 struct mpt_ioctl_command32 karg32; 2756 struct mpt_ioctl_command32 __user *uarg = (struct mpt_ioctl_command32 __user *) arg; 2757 struct mpt_ioctl_command karg; 2758 MPT_ADAPTER *iocp = NULL; 2759 int iocnum, iocnumX; 2760 int nonblock = (filp->f_flags & O_NONBLOCK); 2761 int ret; 2762 2763 if (copy_from_user(&karg32, (char __user *)arg, sizeof(karg32))) 2764 return -EFAULT; 2765 2766 /* Verify intended MPT adapter */ 2767 iocnumX = karg32.hdr.iocnum & 0xFF; 2768 if (((iocnum = mpt_verify_adapter(iocnumX, &iocp)) < 0) || 2769 (iocp == NULL)) { 2770 printk(KERN_DEBUG MYNAM "::compat_mpt_command @%d - ioc%d not found!\n", 2771 __LINE__, iocnumX); 2772 return -ENODEV; 2773 } 2774 2775 if ((ret = mptctl_syscall_down(iocp, nonblock)) != 0) 2776 return ret; 2777 2778 dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "compat_mpt_command() called\n", 2779 iocp->name)); 2780 /* Copy data to karg */ 2781 karg.hdr.iocnum = karg32.hdr.iocnum; 2782 karg.hdr.port = karg32.hdr.port; 2783 karg.timeout = karg32.timeout; 2784 karg.maxReplyBytes = karg32.maxReplyBytes; 2785 2786 karg.dataInSize = karg32.dataInSize; 2787 karg.dataOutSize = karg32.dataOutSize; 2788 karg.maxSenseBytes = karg32.maxSenseBytes; 2789 karg.dataSgeOffset = karg32.dataSgeOffset; 2790 2791 karg.replyFrameBufPtr = (char __user *)(unsigned long)karg32.replyFrameBufPtr; 2792 karg.dataInBufPtr = (char __user *)(unsigned long)karg32.dataInBufPtr; 2793 karg.dataOutBufPtr = (char __user *)(unsigned long)karg32.dataOutBufPtr; 2794 karg.senseDataPtr = (char __user *)(unsigned long)karg32.senseDataPtr; 2795 2796 /* Pass new structure to do_mpt_command 2797 */ 2798 ret = mptctl_do_mpt_command (iocp, karg, &uarg->MF); 2799 2800 mutex_unlock(&iocp->ioctl_cmds.mutex); 2801 2802 return ret; 2803 } 2804 2805 static long compat_mpctl_ioctl(struct file *f, unsigned int cmd, unsigned long arg) 2806 { 2807 long ret; 2808 mutex_lock(&mpctl_mutex); 2809 switch (cmd) { 2810 case MPTIOCINFO: 2811 case MPTIOCINFO1: 2812 case MPTIOCINFO2: 2813 case MPTTARGETINFO: 2814 case MPTEVENTQUERY: 2815 case MPTEVENTENABLE: 2816 case MPTEVENTREPORT: 2817 case MPTHARDRESET: 2818 case HP_GETHOSTINFO: 2819 case HP_GETTARGETINFO: 2820 case MPTTEST: 2821 ret = __mptctl_ioctl(f, cmd, arg); 2822 break; 2823 case MPTCOMMAND32: 2824 ret = compat_mpt_command(f, cmd, arg); 2825 break; 2826 case MPTFWDOWNLOAD32: 2827 ret = compat_mptfwxfer_ioctl(f, cmd, arg); 2828 break; 2829 default: 2830 ret = -ENOIOCTLCMD; 2831 break; 2832 } 2833 mutex_unlock(&mpctl_mutex); 2834 return ret; 2835 } 2836 2837 #endif 2838 2839 2840 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2841 /* 2842 * mptctl_probe - Installs ioctl devices per bus. 2843 * @pdev: Pointer to pci_dev structure 2844 * 2845 * Returns 0 for success, non-zero for failure. 2846 * 2847 */ 2848 2849 static int 2850 mptctl_probe(struct pci_dev *pdev, const struct pci_device_id *id) 2851 { 2852 MPT_ADAPTER *ioc = pci_get_drvdata(pdev); 2853 2854 mutex_init(&ioc->ioctl_cmds.mutex); 2855 init_completion(&ioc->ioctl_cmds.done); 2856 return 0; 2857 } 2858 2859 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2860 /* 2861 * mptctl_remove - Removed ioctl devices 2862 * @pdev: Pointer to pci_dev structure 2863 * 2864 * 2865 */ 2866 static void 2867 mptctl_remove(struct pci_dev *pdev) 2868 { 2869 } 2870 2871 static struct mpt_pci_driver mptctl_driver = { 2872 .probe = mptctl_probe, 2873 .remove = mptctl_remove, 2874 }; 2875 2876 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2877 static int __init mptctl_init(void) 2878 { 2879 int err; 2880 int where = 1; 2881 2882 show_mptmod_ver(my_NAME, my_VERSION); 2883 2884 mpt_device_driver_register(&mptctl_driver, MPTCTL_DRIVER); 2885 2886 /* Register this device */ 2887 err = misc_register(&mptctl_miscdev); 2888 if (err < 0) { 2889 printk(KERN_ERR MYNAM ": Can't register misc device [minor=%d].\n", MPT_MINOR); 2890 goto out_fail; 2891 } 2892 printk(KERN_INFO MYNAM ": Registered with Fusion MPT base driver\n"); 2893 printk(KERN_INFO MYNAM ": /dev/%s @ (major,minor=%d,%d)\n", 2894 mptctl_miscdev.name, MISC_MAJOR, mptctl_miscdev.minor); 2895 2896 /* 2897 * Install our handler 2898 */ 2899 ++where; 2900 mptctl_id = mpt_register(mptctl_reply, MPTCTL_DRIVER, 2901 "mptctl_reply"); 2902 if (!mptctl_id || mptctl_id >= MPT_MAX_PROTOCOL_DRIVERS) { 2903 printk(KERN_ERR MYNAM ": ERROR: Failed to register with Fusion MPT base driver\n"); 2904 misc_deregister(&mptctl_miscdev); 2905 err = -EBUSY; 2906 goto out_fail; 2907 } 2908 2909 mptctl_taskmgmt_id = mpt_register(mptctl_taskmgmt_reply, MPTCTL_DRIVER, 2910 "mptctl_taskmgmt_reply"); 2911 if (!mptctl_taskmgmt_id || mptctl_taskmgmt_id >= MPT_MAX_PROTOCOL_DRIVERS) { 2912 printk(KERN_ERR MYNAM ": ERROR: Failed to register with Fusion MPT base driver\n"); 2913 mpt_deregister(mptctl_id); 2914 misc_deregister(&mptctl_miscdev); 2915 err = -EBUSY; 2916 goto out_fail; 2917 } 2918 2919 mpt_reset_register(mptctl_id, mptctl_ioc_reset); 2920 mpt_event_register(mptctl_id, mptctl_event_process); 2921 2922 return 0; 2923 2924 out_fail: 2925 2926 mpt_device_driver_deregister(MPTCTL_DRIVER); 2927 2928 return err; 2929 } 2930 2931 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2932 static void mptctl_exit(void) 2933 { 2934 misc_deregister(&mptctl_miscdev); 2935 printk(KERN_INFO MYNAM ": Deregistered /dev/%s @ (major,minor=%d,%d)\n", 2936 mptctl_miscdev.name, MISC_MAJOR, mptctl_miscdev.minor); 2937 2938 /* De-register event handler from base module */ 2939 mpt_event_deregister(mptctl_id); 2940 2941 /* De-register reset handler from base module */ 2942 mpt_reset_deregister(mptctl_id); 2943 2944 /* De-register callback handler from base module */ 2945 mpt_deregister(mptctl_taskmgmt_id); 2946 mpt_deregister(mptctl_id); 2947 2948 mpt_device_driver_deregister(MPTCTL_DRIVER); 2949 2950 } 2951 2952 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2953 2954 module_init(mptctl_init); 2955 module_exit(mptctl_exit); 2956