1 /* 2 * linux/drivers/message/fusion/mptbase.c 3 * This is the Fusion MPT base driver which supports multiple 4 * (SCSI + LAN) specialized protocol drivers. 5 * For use with LSI PCI chip/adapter(s) 6 * running LSI Fusion MPT (Message Passing Technology) firmware. 7 * 8 * Copyright (c) 1999-2008 LSI Corporation 9 * (mailto:DL-MPTFusionLinux@lsi.com) 10 * 11 */ 12 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 13 /* 14 This program is free software; you can redistribute it and/or modify 15 it under the terms of the GNU General Public License as published by 16 the Free Software Foundation; version 2 of the License. 17 18 This program is distributed in the hope that it will be useful, 19 but WITHOUT ANY WARRANTY; without even the implied warranty of 20 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 21 GNU General Public License for more details. 22 23 NO WARRANTY 24 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR 25 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT 26 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, 27 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is 28 solely responsible for determining the appropriateness of using and 29 distributing the Program and assumes all risks associated with its 30 exercise of rights under this Agreement, including but not limited to 31 the risks and costs of program errors, damage to or loss of data, 32 programs or equipment, and unavailability or interruption of operations. 33 34 DISCLAIMER OF LIABILITY 35 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY 36 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 37 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND 38 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR 39 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE 40 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED 41 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES 42 43 You should have received a copy of the GNU General Public License 44 along with this program; if not, write to the Free Software 45 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 46 */ 47 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 48 49 #include <linux/kernel.h> 50 #include <linux/module.h> 51 #include <linux/errno.h> 52 #include <linux/init.h> 53 #include <linux/seq_file.h> 54 #include <linux/slab.h> 55 #include <linux/types.h> 56 #include <linux/pci.h> 57 #include <linux/kdev_t.h> 58 #include <linux/blkdev.h> 59 #include <linux/delay.h> 60 #include <linux/interrupt.h> /* needed for in_interrupt() proto */ 61 #include <linux/dma-mapping.h> 62 #include <linux/kthread.h> 63 #include <scsi/scsi_host.h> 64 65 #include "mptbase.h" 66 #include "lsi/mpi_log_fc.h" 67 68 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 69 #define my_NAME "Fusion MPT base driver" 70 #define my_VERSION MPT_LINUX_VERSION_COMMON 71 #define MYNAM "mptbase" 72 73 MODULE_AUTHOR(MODULEAUTHOR); 74 MODULE_DESCRIPTION(my_NAME); 75 MODULE_LICENSE("GPL"); 76 MODULE_VERSION(my_VERSION); 77 78 /* 79 * cmd line parameters 80 */ 81 82 static int mpt_msi_enable_spi; 83 module_param(mpt_msi_enable_spi, int, 0); 84 MODULE_PARM_DESC(mpt_msi_enable_spi, 85 " Enable MSI Support for SPI controllers (default=0)"); 86 87 static int mpt_msi_enable_fc; 88 module_param(mpt_msi_enable_fc, int, 0); 89 MODULE_PARM_DESC(mpt_msi_enable_fc, 90 " Enable MSI Support for FC controllers (default=0)"); 91 92 static int mpt_msi_enable_sas; 93 module_param(mpt_msi_enable_sas, int, 0); 94 MODULE_PARM_DESC(mpt_msi_enable_sas, 95 " Enable MSI Support for SAS controllers (default=0)"); 96 97 static int mpt_channel_mapping; 98 module_param(mpt_channel_mapping, int, 0); 99 MODULE_PARM_DESC(mpt_channel_mapping, " Mapping id's to channels (default=0)"); 100 101 static int mpt_debug_level; 102 static int mpt_set_debug_level(const char *val, const struct kernel_param *kp); 103 module_param_call(mpt_debug_level, mpt_set_debug_level, param_get_int, 104 &mpt_debug_level, 0600); 105 MODULE_PARM_DESC(mpt_debug_level, 106 " debug level - refer to mptdebug.h - (default=0)"); 107 108 int mpt_fwfault_debug; 109 EXPORT_SYMBOL(mpt_fwfault_debug); 110 module_param(mpt_fwfault_debug, int, 0600); 111 MODULE_PARM_DESC(mpt_fwfault_debug, 112 "Enable detection of Firmware fault and halt Firmware on fault - (default=0)"); 113 114 static char MptCallbacksName[MPT_MAX_PROTOCOL_DRIVERS] 115 [MPT_MAX_CALLBACKNAME_LEN+1]; 116 117 #ifdef MFCNT 118 static int mfcounter = 0; 119 #define PRINT_MF_COUNT 20000 120 #endif 121 122 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 123 /* 124 * Public data... 125 */ 126 127 #define WHOINIT_UNKNOWN 0xAA 128 129 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 130 /* 131 * Private data... 132 */ 133 /* Adapter link list */ 134 LIST_HEAD(ioc_list); 135 /* Callback lookup table */ 136 static MPT_CALLBACK MptCallbacks[MPT_MAX_PROTOCOL_DRIVERS]; 137 /* Protocol driver class lookup table */ 138 static int MptDriverClass[MPT_MAX_PROTOCOL_DRIVERS]; 139 /* Event handler lookup table */ 140 static MPT_EVHANDLER MptEvHandlers[MPT_MAX_PROTOCOL_DRIVERS]; 141 /* Reset handler lookup table */ 142 static MPT_RESETHANDLER MptResetHandlers[MPT_MAX_PROTOCOL_DRIVERS]; 143 static struct mpt_pci_driver *MptDeviceDriverHandlers[MPT_MAX_PROTOCOL_DRIVERS]; 144 145 #ifdef CONFIG_PROC_FS 146 static struct proc_dir_entry *mpt_proc_root_dir; 147 #endif 148 149 /* 150 * Driver Callback Index's 151 */ 152 static u8 mpt_base_index = MPT_MAX_PROTOCOL_DRIVERS; 153 static u8 last_drv_idx; 154 155 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 156 /* 157 * Forward protos... 158 */ 159 static irqreturn_t mpt_interrupt(int irq, void *bus_id); 160 static int mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, 161 MPT_FRAME_HDR *reply); 162 static int mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, 163 u32 *req, int replyBytes, u16 *u16reply, int maxwait, 164 int sleepFlag); 165 static int mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag); 166 static void mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev); 167 static void mpt_adapter_disable(MPT_ADAPTER *ioc); 168 static void mpt_adapter_dispose(MPT_ADAPTER *ioc); 169 170 static void MptDisplayIocCapabilities(MPT_ADAPTER *ioc); 171 static int MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag); 172 static int GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason); 173 static int GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag); 174 static int SendIocInit(MPT_ADAPTER *ioc, int sleepFlag); 175 static int SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag); 176 static int mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag); 177 static int mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag); 178 static int mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag); 179 static int KickStart(MPT_ADAPTER *ioc, int ignore, int sleepFlag); 180 static int SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag); 181 static int PrimeIocFifos(MPT_ADAPTER *ioc); 182 static int WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag); 183 static int WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag); 184 static int WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag); 185 static int GetLanConfigPages(MPT_ADAPTER *ioc); 186 static int GetIoUnitPage2(MPT_ADAPTER *ioc); 187 int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode); 188 static int mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum); 189 static int mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum); 190 static void mpt_read_ioc_pg_1(MPT_ADAPTER *ioc); 191 static void mpt_read_ioc_pg_4(MPT_ADAPTER *ioc); 192 static void mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc); 193 static int SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch, 194 int sleepFlag); 195 static int SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp); 196 static int mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag); 197 static int mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init); 198 199 #ifdef CONFIG_PROC_FS 200 static const struct file_operations mpt_summary_proc_fops; 201 static const struct file_operations mpt_version_proc_fops; 202 static const struct file_operations mpt_iocinfo_proc_fops; 203 #endif 204 static void mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc); 205 206 static int ProcessEventNotification(MPT_ADAPTER *ioc, 207 EventNotificationReply_t *evReply, int *evHandlers); 208 static void mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf); 209 static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info); 210 static void mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info); 211 static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info , u8 cb_idx); 212 static int mpt_read_ioc_pg_3(MPT_ADAPTER *ioc); 213 static void mpt_inactive_raid_list_free(MPT_ADAPTER *ioc); 214 215 /* module entry point */ 216 static int __init fusion_init (void); 217 static void __exit fusion_exit (void); 218 219 #define CHIPREG_READ32(addr) readl_relaxed(addr) 220 #define CHIPREG_READ32_dmasync(addr) readl(addr) 221 #define CHIPREG_WRITE32(addr,val) writel(val, addr) 222 #define CHIPREG_PIO_WRITE32(addr,val) outl(val, (unsigned long)addr) 223 #define CHIPREG_PIO_READ32(addr) inl((unsigned long)addr) 224 225 static void 226 pci_disable_io_access(struct pci_dev *pdev) 227 { 228 u16 command_reg; 229 230 pci_read_config_word(pdev, PCI_COMMAND, &command_reg); 231 command_reg &= ~1; 232 pci_write_config_word(pdev, PCI_COMMAND, command_reg); 233 } 234 235 static void 236 pci_enable_io_access(struct pci_dev *pdev) 237 { 238 u16 command_reg; 239 240 pci_read_config_word(pdev, PCI_COMMAND, &command_reg); 241 command_reg |= 1; 242 pci_write_config_word(pdev, PCI_COMMAND, command_reg); 243 } 244 245 static int mpt_set_debug_level(const char *val, const struct kernel_param *kp) 246 { 247 int ret = param_set_int(val, kp); 248 MPT_ADAPTER *ioc; 249 250 if (ret) 251 return ret; 252 253 list_for_each_entry(ioc, &ioc_list, list) 254 ioc->debug_level = mpt_debug_level; 255 return 0; 256 } 257 258 /** 259 * mpt_get_cb_idx - obtain cb_idx for registered driver 260 * @dclass: class driver enum 261 * 262 * Returns cb_idx, or zero means it wasn't found 263 **/ 264 static u8 265 mpt_get_cb_idx(MPT_DRIVER_CLASS dclass) 266 { 267 u8 cb_idx; 268 269 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) 270 if (MptDriverClass[cb_idx] == dclass) 271 return cb_idx; 272 return 0; 273 } 274 275 /** 276 * mpt_is_discovery_complete - determine if discovery has completed 277 * @ioc: per adatper instance 278 * 279 * Returns 1 when discovery completed, else zero. 280 */ 281 static int 282 mpt_is_discovery_complete(MPT_ADAPTER *ioc) 283 { 284 ConfigExtendedPageHeader_t hdr; 285 CONFIGPARMS cfg; 286 SasIOUnitPage0_t *buffer; 287 dma_addr_t dma_handle; 288 int rc = 0; 289 290 memset(&hdr, 0, sizeof(ConfigExtendedPageHeader_t)); 291 memset(&cfg, 0, sizeof(CONFIGPARMS)); 292 hdr.PageVersion = MPI_SASIOUNITPAGE0_PAGEVERSION; 293 hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; 294 hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT; 295 cfg.cfghdr.ehdr = &hdr; 296 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 297 298 if ((mpt_config(ioc, &cfg))) 299 goto out; 300 if (!hdr.ExtPageLength) 301 goto out; 302 303 buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4, 304 &dma_handle); 305 if (!buffer) 306 goto out; 307 308 cfg.physAddr = dma_handle; 309 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 310 311 if ((mpt_config(ioc, &cfg))) 312 goto out_free_consistent; 313 314 if (!(buffer->PhyData[0].PortFlags & 315 MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS)) 316 rc = 1; 317 318 out_free_consistent: 319 pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4, 320 buffer, dma_handle); 321 out: 322 return rc; 323 } 324 325 326 /** 327 * mpt_remove_dead_ioc_func - kthread context to remove dead ioc 328 * @arg: input argument, used to derive ioc 329 * 330 * Return 0 if controller is removed from pci subsystem. 331 * Return -1 for other case. 332 */ 333 static int mpt_remove_dead_ioc_func(void *arg) 334 { 335 MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg; 336 struct pci_dev *pdev; 337 338 if ((ioc == NULL)) 339 return -1; 340 341 pdev = ioc->pcidev; 342 if ((pdev == NULL)) 343 return -1; 344 345 pci_stop_and_remove_bus_device_locked(pdev); 346 return 0; 347 } 348 349 350 351 /** 352 * mpt_fault_reset_work - work performed on workq after ioc fault 353 * @work: input argument, used to derive ioc 354 * 355 **/ 356 static void 357 mpt_fault_reset_work(struct work_struct *work) 358 { 359 MPT_ADAPTER *ioc = 360 container_of(work, MPT_ADAPTER, fault_reset_work.work); 361 u32 ioc_raw_state; 362 int rc; 363 unsigned long flags; 364 MPT_SCSI_HOST *hd; 365 struct task_struct *p; 366 367 if (ioc->ioc_reset_in_progress || !ioc->active) 368 goto out; 369 370 371 ioc_raw_state = mpt_GetIocState(ioc, 0); 372 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_MASK) { 373 printk(MYIOC_s_INFO_FMT "%s: IOC is non-operational !!!!\n", 374 ioc->name, __func__); 375 376 /* 377 * Call mptscsih_flush_pending_cmds callback so that we 378 * flush all pending commands back to OS. 379 * This call is required to aovid deadlock at block layer. 380 * Dead IOC will fail to do diag reset,and this call is safe 381 * since dead ioc will never return any command back from HW. 382 */ 383 hd = shost_priv(ioc->sh); 384 ioc->schedule_dead_ioc_flush_running_cmds(hd); 385 386 /*Remove the Dead Host */ 387 p = kthread_run(mpt_remove_dead_ioc_func, ioc, 388 "mpt_dead_ioc_%d", ioc->id); 389 if (IS_ERR(p)) { 390 printk(MYIOC_s_ERR_FMT 391 "%s: Running mpt_dead_ioc thread failed !\n", 392 ioc->name, __func__); 393 } else { 394 printk(MYIOC_s_WARN_FMT 395 "%s: Running mpt_dead_ioc thread success !\n", 396 ioc->name, __func__); 397 } 398 return; /* don't rearm timer */ 399 } 400 401 if ((ioc_raw_state & MPI_IOC_STATE_MASK) 402 == MPI_IOC_STATE_FAULT) { 403 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state (%04xh)!!!\n", 404 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK); 405 printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n", 406 ioc->name, __func__); 407 rc = mpt_HardResetHandler(ioc, CAN_SLEEP); 408 printk(MYIOC_s_WARN_FMT "%s: HardReset: %s\n", ioc->name, 409 __func__, (rc == 0) ? "success" : "failed"); 410 ioc_raw_state = mpt_GetIocState(ioc, 0); 411 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) 412 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state after " 413 "reset (%04xh)\n", ioc->name, ioc_raw_state & 414 MPI_DOORBELL_DATA_MASK); 415 } else if (ioc->bus_type == SAS && ioc->sas_discovery_quiesce_io) { 416 if ((mpt_is_discovery_complete(ioc))) { 417 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "clearing " 418 "discovery_quiesce_io flag\n", ioc->name)); 419 ioc->sas_discovery_quiesce_io = 0; 420 } 421 } 422 423 out: 424 /* 425 * Take turns polling alternate controller 426 */ 427 if (ioc->alt_ioc) 428 ioc = ioc->alt_ioc; 429 430 /* rearm the timer */ 431 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 432 if (ioc->reset_work_q) 433 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work, 434 msecs_to_jiffies(MPT_POLLING_INTERVAL)); 435 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 436 } 437 438 439 /* 440 * Process turbo (context) reply... 441 */ 442 static void 443 mpt_turbo_reply(MPT_ADAPTER *ioc, u32 pa) 444 { 445 MPT_FRAME_HDR *mf = NULL; 446 MPT_FRAME_HDR *mr = NULL; 447 u16 req_idx = 0; 448 u8 cb_idx; 449 450 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got TURBO reply req_idx=%08x\n", 451 ioc->name, pa)); 452 453 switch (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT) { 454 case MPI_CONTEXT_REPLY_TYPE_SCSI_INIT: 455 req_idx = pa & 0x0000FFFF; 456 cb_idx = (pa & 0x00FF0000) >> 16; 457 mf = MPT_INDEX_2_MFPTR(ioc, req_idx); 458 break; 459 case MPI_CONTEXT_REPLY_TYPE_LAN: 460 cb_idx = mpt_get_cb_idx(MPTLAN_DRIVER); 461 /* 462 * Blind set of mf to NULL here was fatal 463 * after lan_reply says "freeme" 464 * Fix sort of combined with an optimization here; 465 * added explicit check for case where lan_reply 466 * was just returning 1 and doing nothing else. 467 * For this case skip the callback, but set up 468 * proper mf value first here:-) 469 */ 470 if ((pa & 0x58000000) == 0x58000000) { 471 req_idx = pa & 0x0000FFFF; 472 mf = MPT_INDEX_2_MFPTR(ioc, req_idx); 473 mpt_free_msg_frame(ioc, mf); 474 mb(); 475 return; 476 break; 477 } 478 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa); 479 break; 480 case MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET: 481 cb_idx = mpt_get_cb_idx(MPTSTM_DRIVER); 482 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa); 483 break; 484 default: 485 cb_idx = 0; 486 BUG(); 487 } 488 489 /* Check for (valid) IO callback! */ 490 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS || 491 MptCallbacks[cb_idx] == NULL) { 492 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n", 493 __func__, ioc->name, cb_idx); 494 goto out; 495 } 496 497 if (MptCallbacks[cb_idx](ioc, mf, mr)) 498 mpt_free_msg_frame(ioc, mf); 499 out: 500 mb(); 501 } 502 503 static void 504 mpt_reply(MPT_ADAPTER *ioc, u32 pa) 505 { 506 MPT_FRAME_HDR *mf; 507 MPT_FRAME_HDR *mr; 508 u16 req_idx; 509 u8 cb_idx; 510 int freeme; 511 512 u32 reply_dma_low; 513 u16 ioc_stat; 514 515 /* non-TURBO reply! Hmmm, something may be up... 516 * Newest turbo reply mechanism; get address 517 * via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)! 518 */ 519 520 /* Map DMA address of reply header to cpu address. 521 * pa is 32 bits - but the dma address may be 32 or 64 bits 522 * get offset based only only the low addresses 523 */ 524 525 reply_dma_low = (pa <<= 1); 526 mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames + 527 (reply_dma_low - ioc->reply_frames_low_dma)); 528 529 req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx); 530 cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx; 531 mf = MPT_INDEX_2_MFPTR(ioc, req_idx); 532 533 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n", 534 ioc->name, mr, req_idx, cb_idx, mr->u.hdr.Function)); 535 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mr); 536 537 /* Check/log IOC log info 538 */ 539 ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus); 540 if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) { 541 u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo); 542 if (ioc->bus_type == FC) 543 mpt_fc_log_info(ioc, log_info); 544 else if (ioc->bus_type == SPI) 545 mpt_spi_log_info(ioc, log_info); 546 else if (ioc->bus_type == SAS) 547 mpt_sas_log_info(ioc, log_info, cb_idx); 548 } 549 550 if (ioc_stat & MPI_IOCSTATUS_MASK) 551 mpt_iocstatus_info(ioc, (u32)ioc_stat, mf); 552 553 /* Check for (valid) IO callback! */ 554 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS || 555 MptCallbacks[cb_idx] == NULL) { 556 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n", 557 __func__, ioc->name, cb_idx); 558 freeme = 0; 559 goto out; 560 } 561 562 freeme = MptCallbacks[cb_idx](ioc, mf, mr); 563 564 out: 565 /* Flush (non-TURBO) reply with a WRITE! */ 566 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa); 567 568 if (freeme) 569 mpt_free_msg_frame(ioc, mf); 570 mb(); 571 } 572 573 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 574 /** 575 * mpt_interrupt - MPT adapter (IOC) specific interrupt handler. 576 * @irq: irq number (not used) 577 * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure 578 * 579 * This routine is registered via the request_irq() kernel API call, 580 * and handles all interrupts generated from a specific MPT adapter 581 * (also referred to as a IO Controller or IOC). 582 * This routine must clear the interrupt from the adapter and does 583 * so by reading the reply FIFO. Multiple replies may be processed 584 * per single call to this routine. 585 * 586 * This routine handles register-level access of the adapter but 587 * dispatches (calls) a protocol-specific callback routine to handle 588 * the protocol-specific details of the MPT request completion. 589 */ 590 static irqreturn_t 591 mpt_interrupt(int irq, void *bus_id) 592 { 593 MPT_ADAPTER *ioc = bus_id; 594 u32 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo); 595 596 if (pa == 0xFFFFFFFF) 597 return IRQ_NONE; 598 599 /* 600 * Drain the reply FIFO! 601 */ 602 do { 603 if (pa & MPI_ADDRESS_REPLY_A_BIT) 604 mpt_reply(ioc, pa); 605 else 606 mpt_turbo_reply(ioc, pa); 607 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo); 608 } while (pa != 0xFFFFFFFF); 609 610 return IRQ_HANDLED; 611 } 612 613 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 614 /** 615 * mptbase_reply - MPT base driver's callback routine 616 * @ioc: Pointer to MPT_ADAPTER structure 617 * @req: Pointer to original MPT request frame 618 * @reply: Pointer to MPT reply frame (NULL if TurboReply) 619 * 620 * MPT base driver's callback routine; all base driver 621 * "internal" request/reply processing is routed here. 622 * Currently used for EventNotification and EventAck handling. 623 * 624 * Returns 1 indicating original alloc'd request frame ptr 625 * should be freed, or 0 if it shouldn't. 626 */ 627 static int 628 mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply) 629 { 630 EventNotificationReply_t *pEventReply; 631 u8 event; 632 int evHandlers; 633 int freereq = 1; 634 635 switch (reply->u.hdr.Function) { 636 case MPI_FUNCTION_EVENT_NOTIFICATION: 637 pEventReply = (EventNotificationReply_t *)reply; 638 evHandlers = 0; 639 ProcessEventNotification(ioc, pEventReply, &evHandlers); 640 event = le32_to_cpu(pEventReply->Event) & 0xFF; 641 if (pEventReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY) 642 freereq = 0; 643 if (event != MPI_EVENT_EVENT_CHANGE) 644 break; 645 case MPI_FUNCTION_CONFIG: 646 case MPI_FUNCTION_SAS_IO_UNIT_CONTROL: 647 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD; 648 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_RF_VALID; 649 memcpy(ioc->mptbase_cmds.reply, reply, 650 min(MPT_DEFAULT_FRAME_SIZE, 651 4 * reply->u.reply.MsgLength)); 652 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) { 653 ioc->mptbase_cmds.status &= ~MPT_MGMT_STATUS_PENDING; 654 complete(&ioc->mptbase_cmds.done); 655 } else 656 freereq = 0; 657 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_FREE_MF) 658 freereq = 1; 659 break; 660 case MPI_FUNCTION_EVENT_ACK: 661 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT 662 "EventAck reply received\n", ioc->name)); 663 break; 664 default: 665 printk(MYIOC_s_ERR_FMT 666 "Unexpected msg function (=%02Xh) reply received!\n", 667 ioc->name, reply->u.hdr.Function); 668 break; 669 } 670 671 /* 672 * Conditionally tell caller to free the original 673 * EventNotification/EventAck/unexpected request frame! 674 */ 675 return freereq; 676 } 677 678 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 679 /** 680 * mpt_register - Register protocol-specific main callback handler. 681 * @cbfunc: callback function pointer 682 * @dclass: Protocol driver's class (%MPT_DRIVER_CLASS enum value) 683 * @func_name: call function's name 684 * 685 * This routine is called by a protocol-specific driver (SCSI host, 686 * LAN, SCSI target) to register its reply callback routine. Each 687 * protocol-specific driver must do this before it will be able to 688 * use any IOC resources, such as obtaining request frames. 689 * 690 * NOTES: The SCSI protocol driver currently calls this routine thrice 691 * in order to register separate callbacks; one for "normal" SCSI IO; 692 * one for MptScsiTaskMgmt requests; one for Scan/DV requests. 693 * 694 * Returns u8 valued "handle" in the range (and S.O.D. order) 695 * {N,...,7,6,5,...,1} if successful. 696 * A return value of MPT_MAX_PROTOCOL_DRIVERS (including zero!) should be 697 * considered an error by the caller. 698 */ 699 u8 700 mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass, char *func_name) 701 { 702 u8 cb_idx; 703 last_drv_idx = MPT_MAX_PROTOCOL_DRIVERS; 704 705 /* 706 * Search for empty callback slot in this order: {N,...,7,6,5,...,1} 707 * (slot/handle 0 is reserved!) 708 */ 709 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 710 if (MptCallbacks[cb_idx] == NULL) { 711 MptCallbacks[cb_idx] = cbfunc; 712 MptDriverClass[cb_idx] = dclass; 713 MptEvHandlers[cb_idx] = NULL; 714 last_drv_idx = cb_idx; 715 strlcpy(MptCallbacksName[cb_idx], func_name, 716 MPT_MAX_CALLBACKNAME_LEN+1); 717 break; 718 } 719 } 720 721 return last_drv_idx; 722 } 723 724 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 725 /** 726 * mpt_deregister - Deregister a protocol drivers resources. 727 * @cb_idx: previously registered callback handle 728 * 729 * Each protocol-specific driver should call this routine when its 730 * module is unloaded. 731 */ 732 void 733 mpt_deregister(u8 cb_idx) 734 { 735 if (cb_idx && (cb_idx < MPT_MAX_PROTOCOL_DRIVERS)) { 736 MptCallbacks[cb_idx] = NULL; 737 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER; 738 MptEvHandlers[cb_idx] = NULL; 739 740 last_drv_idx++; 741 } 742 } 743 744 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 745 /** 746 * mpt_event_register - Register protocol-specific event callback handler. 747 * @cb_idx: previously registered (via mpt_register) callback handle 748 * @ev_cbfunc: callback function 749 * 750 * This routine can be called by one or more protocol-specific drivers 751 * if/when they choose to be notified of MPT events. 752 * 753 * Returns 0 for success. 754 */ 755 int 756 mpt_event_register(u8 cb_idx, MPT_EVHANDLER ev_cbfunc) 757 { 758 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) 759 return -1; 760 761 MptEvHandlers[cb_idx] = ev_cbfunc; 762 return 0; 763 } 764 765 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 766 /** 767 * mpt_event_deregister - Deregister protocol-specific event callback handler 768 * @cb_idx: previously registered callback handle 769 * 770 * Each protocol-specific driver should call this routine 771 * when it does not (or can no longer) handle events, 772 * or when its module is unloaded. 773 */ 774 void 775 mpt_event_deregister(u8 cb_idx) 776 { 777 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) 778 return; 779 780 MptEvHandlers[cb_idx] = NULL; 781 } 782 783 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 784 /** 785 * mpt_reset_register - Register protocol-specific IOC reset handler. 786 * @cb_idx: previously registered (via mpt_register) callback handle 787 * @reset_func: reset function 788 * 789 * This routine can be called by one or more protocol-specific drivers 790 * if/when they choose to be notified of IOC resets. 791 * 792 * Returns 0 for success. 793 */ 794 int 795 mpt_reset_register(u8 cb_idx, MPT_RESETHANDLER reset_func) 796 { 797 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) 798 return -1; 799 800 MptResetHandlers[cb_idx] = reset_func; 801 return 0; 802 } 803 804 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 805 /** 806 * mpt_reset_deregister - Deregister protocol-specific IOC reset handler. 807 * @cb_idx: previously registered callback handle 808 * 809 * Each protocol-specific driver should call this routine 810 * when it does not (or can no longer) handle IOC reset handling, 811 * or when its module is unloaded. 812 */ 813 void 814 mpt_reset_deregister(u8 cb_idx) 815 { 816 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) 817 return; 818 819 MptResetHandlers[cb_idx] = NULL; 820 } 821 822 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 823 /** 824 * mpt_device_driver_register - Register device driver hooks 825 * @dd_cbfunc: driver callbacks struct 826 * @cb_idx: MPT protocol driver index 827 */ 828 int 829 mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, u8 cb_idx) 830 { 831 MPT_ADAPTER *ioc; 832 const struct pci_device_id *id; 833 834 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) 835 return -EINVAL; 836 837 MptDeviceDriverHandlers[cb_idx] = dd_cbfunc; 838 839 /* call per pci device probe entry point */ 840 list_for_each_entry(ioc, &ioc_list, list) { 841 id = ioc->pcidev->driver ? 842 ioc->pcidev->driver->id_table : NULL; 843 if (dd_cbfunc->probe) 844 dd_cbfunc->probe(ioc->pcidev, id); 845 } 846 847 return 0; 848 } 849 850 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 851 /** 852 * mpt_device_driver_deregister - DeRegister device driver hooks 853 * @cb_idx: MPT protocol driver index 854 */ 855 void 856 mpt_device_driver_deregister(u8 cb_idx) 857 { 858 struct mpt_pci_driver *dd_cbfunc; 859 MPT_ADAPTER *ioc; 860 861 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) 862 return; 863 864 dd_cbfunc = MptDeviceDriverHandlers[cb_idx]; 865 866 list_for_each_entry(ioc, &ioc_list, list) { 867 if (dd_cbfunc->remove) 868 dd_cbfunc->remove(ioc->pcidev); 869 } 870 871 MptDeviceDriverHandlers[cb_idx] = NULL; 872 } 873 874 875 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 876 /** 877 * mpt_get_msg_frame - Obtain an MPT request frame from the pool 878 * @cb_idx: Handle of registered MPT protocol driver 879 * @ioc: Pointer to MPT adapter structure 880 * 881 * Obtain an MPT request frame from the pool (of 1024) that are 882 * allocated per MPT adapter. 883 * 884 * Returns pointer to a MPT request frame or %NULL if none are available 885 * or IOC is not active. 886 */ 887 MPT_FRAME_HDR* 888 mpt_get_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc) 889 { 890 MPT_FRAME_HDR *mf; 891 unsigned long flags; 892 u16 req_idx; /* Request index */ 893 894 /* validate handle and ioc identifier */ 895 896 #ifdef MFCNT 897 if (!ioc->active) 898 printk(MYIOC_s_WARN_FMT "IOC Not Active! mpt_get_msg_frame " 899 "returning NULL!\n", ioc->name); 900 #endif 901 902 /* If interrupts are not attached, do not return a request frame */ 903 if (!ioc->active) 904 return NULL; 905 906 spin_lock_irqsave(&ioc->FreeQlock, flags); 907 if (!list_empty(&ioc->FreeQ)) { 908 int req_offset; 909 910 mf = list_entry(ioc->FreeQ.next, MPT_FRAME_HDR, 911 u.frame.linkage.list); 912 list_del(&mf->u.frame.linkage.list); 913 mf->u.frame.linkage.arg1 = 0; 914 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */ 915 req_offset = (u8 *)mf - (u8 *)ioc->req_frames; 916 /* u16! */ 917 req_idx = req_offset / ioc->req_sz; 918 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx); 919 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0; 920 /* Default, will be changed if necessary in SG generation */ 921 ioc->RequestNB[req_idx] = ioc->NB_for_64_byte_frame; 922 #ifdef MFCNT 923 ioc->mfcnt++; 924 #endif 925 } 926 else 927 mf = NULL; 928 spin_unlock_irqrestore(&ioc->FreeQlock, flags); 929 930 #ifdef MFCNT 931 if (mf == NULL) 932 printk(MYIOC_s_WARN_FMT "IOC Active. No free Msg Frames! " 933 "Count 0x%x Max 0x%x\n", ioc->name, ioc->mfcnt, 934 ioc->req_depth); 935 mfcounter++; 936 if (mfcounter == PRINT_MF_COUNT) 937 printk(MYIOC_s_INFO_FMT "MF Count 0x%x Max 0x%x \n", ioc->name, 938 ioc->mfcnt, ioc->req_depth); 939 #endif 940 941 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_get_msg_frame(%d,%d), got mf=%p\n", 942 ioc->name, cb_idx, ioc->id, mf)); 943 return mf; 944 } 945 946 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 947 /** 948 * mpt_put_msg_frame - Send a protocol-specific MPT request frame to an IOC 949 * @cb_idx: Handle of registered MPT protocol driver 950 * @ioc: Pointer to MPT adapter structure 951 * @mf: Pointer to MPT request frame 952 * 953 * This routine posts an MPT request frame to the request post FIFO of a 954 * specific MPT adapter. 955 */ 956 void 957 mpt_put_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf) 958 { 959 u32 mf_dma_addr; 960 int req_offset; 961 u16 req_idx; /* Request index */ 962 963 /* ensure values are reset properly! */ 964 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */ 965 req_offset = (u8 *)mf - (u8 *)ioc->req_frames; 966 /* u16! */ 967 req_idx = req_offset / ioc->req_sz; 968 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx); 969 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0; 970 971 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf); 972 973 mf_dma_addr = (ioc->req_frames_low_dma + req_offset) | ioc->RequestNB[req_idx]; 974 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d " 975 "RequestNB=%x\n", ioc->name, mf_dma_addr, req_idx, 976 ioc->RequestNB[req_idx])); 977 CHIPREG_WRITE32(&ioc->chip->RequestFifo, mf_dma_addr); 978 } 979 980 /** 981 * mpt_put_msg_frame_hi_pri - Send a hi-pri protocol-specific MPT request frame 982 * @cb_idx: Handle of registered MPT protocol driver 983 * @ioc: Pointer to MPT adapter structure 984 * @mf: Pointer to MPT request frame 985 * 986 * Send a protocol-specific MPT request frame to an IOC using 987 * hi-priority request queue. 988 * 989 * This routine posts an MPT request frame to the request post FIFO of a 990 * specific MPT adapter. 991 **/ 992 void 993 mpt_put_msg_frame_hi_pri(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf) 994 { 995 u32 mf_dma_addr; 996 int req_offset; 997 u16 req_idx; /* Request index */ 998 999 /* ensure values are reset properly! */ 1000 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; 1001 req_offset = (u8 *)mf - (u8 *)ioc->req_frames; 1002 req_idx = req_offset / ioc->req_sz; 1003 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx); 1004 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0; 1005 1006 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf); 1007 1008 mf_dma_addr = (ioc->req_frames_low_dma + req_offset); 1009 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d\n", 1010 ioc->name, mf_dma_addr, req_idx)); 1011 CHIPREG_WRITE32(&ioc->chip->RequestHiPriFifo, mf_dma_addr); 1012 } 1013 1014 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1015 /** 1016 * mpt_free_msg_frame - Place MPT request frame back on FreeQ. 1017 * @ioc: Pointer to MPT adapter structure 1018 * @mf: Pointer to MPT request frame 1019 * 1020 * This routine places a MPT request frame back on the MPT adapter's 1021 * FreeQ. 1022 */ 1023 void 1024 mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf) 1025 { 1026 unsigned long flags; 1027 1028 /* Put Request back on FreeQ! */ 1029 spin_lock_irqsave(&ioc->FreeQlock, flags); 1030 if (cpu_to_le32(mf->u.frame.linkage.arg1) == 0xdeadbeaf) 1031 goto out; 1032 /* signature to know if this mf is freed */ 1033 mf->u.frame.linkage.arg1 = cpu_to_le32(0xdeadbeaf); 1034 list_add(&mf->u.frame.linkage.list, &ioc->FreeQ); 1035 #ifdef MFCNT 1036 ioc->mfcnt--; 1037 #endif 1038 out: 1039 spin_unlock_irqrestore(&ioc->FreeQlock, flags); 1040 } 1041 1042 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1043 /** 1044 * mpt_add_sge - Place a simple 32 bit SGE at address pAddr. 1045 * @pAddr: virtual address for SGE 1046 * @flagslength: SGE flags and data transfer length 1047 * @dma_addr: Physical address 1048 * 1049 * This routine places a MPT request frame back on the MPT adapter's 1050 * FreeQ. 1051 */ 1052 static void 1053 mpt_add_sge(void *pAddr, u32 flagslength, dma_addr_t dma_addr) 1054 { 1055 SGESimple32_t *pSge = (SGESimple32_t *) pAddr; 1056 pSge->FlagsLength = cpu_to_le32(flagslength); 1057 pSge->Address = cpu_to_le32(dma_addr); 1058 } 1059 1060 /** 1061 * mpt_add_sge_64bit - Place a simple 64 bit SGE at address pAddr. 1062 * @pAddr: virtual address for SGE 1063 * @flagslength: SGE flags and data transfer length 1064 * @dma_addr: Physical address 1065 * 1066 * This routine places a MPT request frame back on the MPT adapter's 1067 * FreeQ. 1068 **/ 1069 static void 1070 mpt_add_sge_64bit(void *pAddr, u32 flagslength, dma_addr_t dma_addr) 1071 { 1072 SGESimple64_t *pSge = (SGESimple64_t *) pAddr; 1073 pSge->Address.Low = cpu_to_le32 1074 (lower_32_bits(dma_addr)); 1075 pSge->Address.High = cpu_to_le32 1076 (upper_32_bits(dma_addr)); 1077 pSge->FlagsLength = cpu_to_le32 1078 ((flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING)); 1079 } 1080 1081 /** 1082 * mpt_add_sge_64bit_1078 - Place a simple 64 bit SGE at address pAddr (1078 workaround). 1083 * @pAddr: virtual address for SGE 1084 * @flagslength: SGE flags and data transfer length 1085 * @dma_addr: Physical address 1086 * 1087 * This routine places a MPT request frame back on the MPT adapter's 1088 * FreeQ. 1089 **/ 1090 static void 1091 mpt_add_sge_64bit_1078(void *pAddr, u32 flagslength, dma_addr_t dma_addr) 1092 { 1093 SGESimple64_t *pSge = (SGESimple64_t *) pAddr; 1094 u32 tmp; 1095 1096 pSge->Address.Low = cpu_to_le32 1097 (lower_32_bits(dma_addr)); 1098 tmp = (u32)(upper_32_bits(dma_addr)); 1099 1100 /* 1101 * 1078 errata workaround for the 36GB limitation 1102 */ 1103 if ((((u64)dma_addr + MPI_SGE_LENGTH(flagslength)) >> 32) == 9) { 1104 flagslength |= 1105 MPI_SGE_SET_FLAGS(MPI_SGE_FLAGS_LOCAL_ADDRESS); 1106 tmp |= (1<<31); 1107 if (mpt_debug_level & MPT_DEBUG_36GB_MEM) 1108 printk(KERN_DEBUG "1078 P0M2 addressing for " 1109 "addr = 0x%llx len = %d\n", 1110 (unsigned long long)dma_addr, 1111 MPI_SGE_LENGTH(flagslength)); 1112 } 1113 1114 pSge->Address.High = cpu_to_le32(tmp); 1115 pSge->FlagsLength = cpu_to_le32( 1116 (flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING)); 1117 } 1118 1119 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1120 /** 1121 * mpt_add_chain - Place a 32 bit chain SGE at address pAddr. 1122 * @pAddr: virtual address for SGE 1123 * @next: nextChainOffset value (u32's) 1124 * @length: length of next SGL segment 1125 * @dma_addr: Physical address 1126 * 1127 */ 1128 static void 1129 mpt_add_chain(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr) 1130 { 1131 SGEChain32_t *pChain = (SGEChain32_t *) pAddr; 1132 1133 pChain->Length = cpu_to_le16(length); 1134 pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT; 1135 pChain->NextChainOffset = next; 1136 pChain->Address = cpu_to_le32(dma_addr); 1137 } 1138 1139 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1140 /** 1141 * mpt_add_chain_64bit - Place a 64 bit chain SGE at address pAddr. 1142 * @pAddr: virtual address for SGE 1143 * @next: nextChainOffset value (u32's) 1144 * @length: length of next SGL segment 1145 * @dma_addr: Physical address 1146 * 1147 */ 1148 static void 1149 mpt_add_chain_64bit(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr) 1150 { 1151 SGEChain64_t *pChain = (SGEChain64_t *) pAddr; 1152 u32 tmp = dma_addr & 0xFFFFFFFF; 1153 1154 pChain->Length = cpu_to_le16(length); 1155 pChain->Flags = (MPI_SGE_FLAGS_CHAIN_ELEMENT | 1156 MPI_SGE_FLAGS_64_BIT_ADDRESSING); 1157 1158 pChain->NextChainOffset = next; 1159 1160 pChain->Address.Low = cpu_to_le32(tmp); 1161 tmp = (u32)(upper_32_bits(dma_addr)); 1162 pChain->Address.High = cpu_to_le32(tmp); 1163 } 1164 1165 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1166 /** 1167 * mpt_send_handshake_request - Send MPT request via doorbell handshake method. 1168 * @cb_idx: Handle of registered MPT protocol driver 1169 * @ioc: Pointer to MPT adapter structure 1170 * @reqBytes: Size of the request in bytes 1171 * @req: Pointer to MPT request frame 1172 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay. 1173 * 1174 * This routine is used exclusively to send MptScsiTaskMgmt 1175 * requests since they are required to be sent via doorbell handshake. 1176 * 1177 * NOTE: It is the callers responsibility to byte-swap fields in the 1178 * request which are greater than 1 byte in size. 1179 * 1180 * Returns 0 for success, non-zero for failure. 1181 */ 1182 int 1183 mpt_send_handshake_request(u8 cb_idx, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag) 1184 { 1185 int r = 0; 1186 u8 *req_as_bytes; 1187 int ii; 1188 1189 /* State is known to be good upon entering 1190 * this function so issue the bus reset 1191 * request. 1192 */ 1193 1194 /* 1195 * Emulate what mpt_put_msg_frame() does /wrt to sanity 1196 * setting cb_idx/req_idx. But ONLY if this request 1197 * is in proper (pre-alloc'd) request buffer range... 1198 */ 1199 ii = MFPTR_2_MPT_INDEX(ioc,(MPT_FRAME_HDR*)req); 1200 if (reqBytes >= 12 && ii >= 0 && ii < ioc->req_depth) { 1201 MPT_FRAME_HDR *mf = (MPT_FRAME_HDR*)req; 1202 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(ii); 1203 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; 1204 } 1205 1206 /* Make sure there are no doorbells */ 1207 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 1208 1209 CHIPREG_WRITE32(&ioc->chip->Doorbell, 1210 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) | 1211 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT))); 1212 1213 /* Wait for IOC doorbell int */ 1214 if ((ii = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) { 1215 return ii; 1216 } 1217 1218 /* Read doorbell and check for active bit */ 1219 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE)) 1220 return -5; 1221 1222 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_send_handshake_request start, WaitCnt=%d\n", 1223 ioc->name, ii)); 1224 1225 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 1226 1227 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) { 1228 return -2; 1229 } 1230 1231 /* Send request via doorbell handshake */ 1232 req_as_bytes = (u8 *) req; 1233 for (ii = 0; ii < reqBytes/4; ii++) { 1234 u32 word; 1235 1236 word = ((req_as_bytes[(ii*4) + 0] << 0) | 1237 (req_as_bytes[(ii*4) + 1] << 8) | 1238 (req_as_bytes[(ii*4) + 2] << 16) | 1239 (req_as_bytes[(ii*4) + 3] << 24)); 1240 CHIPREG_WRITE32(&ioc->chip->Doorbell, word); 1241 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) { 1242 r = -3; 1243 break; 1244 } 1245 } 1246 1247 if (r >= 0 && WaitForDoorbellInt(ioc, 10, sleepFlag) >= 0) 1248 r = 0; 1249 else 1250 r = -4; 1251 1252 /* Make sure there are no doorbells */ 1253 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 1254 1255 return r; 1256 } 1257 1258 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1259 /** 1260 * mpt_host_page_access_control - control the IOC's Host Page Buffer access 1261 * @ioc: Pointer to MPT adapter structure 1262 * @access_control_value: define bits below 1263 * @sleepFlag: Specifies whether the process can sleep 1264 * 1265 * Provides mechanism for the host driver to control the IOC's 1266 * Host Page Buffer access. 1267 * 1268 * Access Control Value - bits[15:12] 1269 * 0h Reserved 1270 * 1h Enable Access { MPI_DB_HPBAC_ENABLE_ACCESS } 1271 * 2h Disable Access { MPI_DB_HPBAC_DISABLE_ACCESS } 1272 * 3h Free Buffer { MPI_DB_HPBAC_FREE_BUFFER } 1273 * 1274 * Returns 0 for success, non-zero for failure. 1275 */ 1276 1277 static int 1278 mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag) 1279 { 1280 int r = 0; 1281 1282 /* return if in use */ 1283 if (CHIPREG_READ32(&ioc->chip->Doorbell) 1284 & MPI_DOORBELL_ACTIVE) 1285 return -1; 1286 1287 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 1288 1289 CHIPREG_WRITE32(&ioc->chip->Doorbell, 1290 ((MPI_FUNCTION_HOST_PAGEBUF_ACCESS_CONTROL 1291 <<MPI_DOORBELL_FUNCTION_SHIFT) | 1292 (access_control_value<<12))); 1293 1294 /* Wait for IOC to clear Doorbell Status bit */ 1295 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) { 1296 return -2; 1297 }else 1298 return 0; 1299 } 1300 1301 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1302 /** 1303 * mpt_host_page_alloc - allocate system memory for the fw 1304 * @ioc: Pointer to pointer to IOC adapter 1305 * @ioc_init: Pointer to ioc init config page 1306 * 1307 * If we already allocated memory in past, then resend the same pointer. 1308 * Returns 0 for success, non-zero for failure. 1309 */ 1310 static int 1311 mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init) 1312 { 1313 char *psge; 1314 int flags_length; 1315 u32 host_page_buffer_sz=0; 1316 1317 if(!ioc->HostPageBuffer) { 1318 1319 host_page_buffer_sz = 1320 le32_to_cpu(ioc->facts.HostPageBufferSGE.FlagsLength) & 0xFFFFFF; 1321 1322 if(!host_page_buffer_sz) 1323 return 0; /* fw doesn't need any host buffers */ 1324 1325 /* spin till we get enough memory */ 1326 while(host_page_buffer_sz > 0) { 1327 1328 if((ioc->HostPageBuffer = pci_alloc_consistent( 1329 ioc->pcidev, 1330 host_page_buffer_sz, 1331 &ioc->HostPageBuffer_dma)) != NULL) { 1332 1333 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT 1334 "host_page_buffer @ %p, dma @ %x, sz=%d bytes\n", 1335 ioc->name, ioc->HostPageBuffer, 1336 (u32)ioc->HostPageBuffer_dma, 1337 host_page_buffer_sz)); 1338 ioc->alloc_total += host_page_buffer_sz; 1339 ioc->HostPageBuffer_sz = host_page_buffer_sz; 1340 break; 1341 } 1342 1343 host_page_buffer_sz -= (4*1024); 1344 } 1345 } 1346 1347 if(!ioc->HostPageBuffer) { 1348 printk(MYIOC_s_ERR_FMT 1349 "Failed to alloc memory for host_page_buffer!\n", 1350 ioc->name); 1351 return -999; 1352 } 1353 1354 psge = (char *)&ioc_init->HostPageBufferSGE; 1355 flags_length = MPI_SGE_FLAGS_SIMPLE_ELEMENT | 1356 MPI_SGE_FLAGS_SYSTEM_ADDRESS | 1357 MPI_SGE_FLAGS_HOST_TO_IOC | 1358 MPI_SGE_FLAGS_END_OF_BUFFER; 1359 flags_length = flags_length << MPI_SGE_FLAGS_SHIFT; 1360 flags_length |= ioc->HostPageBuffer_sz; 1361 ioc->add_sge(psge, flags_length, ioc->HostPageBuffer_dma); 1362 ioc->facts.HostPageBufferSGE = ioc_init->HostPageBufferSGE; 1363 1364 return 0; 1365 } 1366 1367 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1368 /** 1369 * mpt_verify_adapter - Given IOC identifier, set pointer to its adapter structure. 1370 * @iocid: IOC unique identifier (integer) 1371 * @iocpp: Pointer to pointer to IOC adapter 1372 * 1373 * Given a unique IOC identifier, set pointer to the associated MPT 1374 * adapter structure. 1375 * 1376 * Returns iocid and sets iocpp if iocid is found. 1377 * Returns -1 if iocid is not found. 1378 */ 1379 int 1380 mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp) 1381 { 1382 MPT_ADAPTER *ioc; 1383 1384 list_for_each_entry(ioc,&ioc_list,list) { 1385 if (ioc->id == iocid) { 1386 *iocpp =ioc; 1387 return iocid; 1388 } 1389 } 1390 1391 *iocpp = NULL; 1392 return -1; 1393 } 1394 1395 /** 1396 * mpt_get_product_name - returns product string 1397 * @vendor: pci vendor id 1398 * @device: pci device id 1399 * @revision: pci revision id 1400 * 1401 * Returns product string displayed when driver loads, 1402 * in /proc/mpt/summary and /sysfs/class/scsi_host/host<X>/version_product 1403 * 1404 **/ 1405 static const char* 1406 mpt_get_product_name(u16 vendor, u16 device, u8 revision) 1407 { 1408 char *product_str = NULL; 1409 1410 if (vendor == PCI_VENDOR_ID_BROCADE) { 1411 switch (device) 1412 { 1413 case MPI_MANUFACTPAGE_DEVICEID_FC949E: 1414 switch (revision) 1415 { 1416 case 0x00: 1417 product_str = "BRE040 A0"; 1418 break; 1419 case 0x01: 1420 product_str = "BRE040 A1"; 1421 break; 1422 default: 1423 product_str = "BRE040"; 1424 break; 1425 } 1426 break; 1427 } 1428 goto out; 1429 } 1430 1431 switch (device) 1432 { 1433 case MPI_MANUFACTPAGE_DEVICEID_FC909: 1434 product_str = "LSIFC909 B1"; 1435 break; 1436 case MPI_MANUFACTPAGE_DEVICEID_FC919: 1437 product_str = "LSIFC919 B0"; 1438 break; 1439 case MPI_MANUFACTPAGE_DEVICEID_FC929: 1440 product_str = "LSIFC929 B0"; 1441 break; 1442 case MPI_MANUFACTPAGE_DEVICEID_FC919X: 1443 if (revision < 0x80) 1444 product_str = "LSIFC919X A0"; 1445 else 1446 product_str = "LSIFC919XL A1"; 1447 break; 1448 case MPI_MANUFACTPAGE_DEVICEID_FC929X: 1449 if (revision < 0x80) 1450 product_str = "LSIFC929X A0"; 1451 else 1452 product_str = "LSIFC929XL A1"; 1453 break; 1454 case MPI_MANUFACTPAGE_DEVICEID_FC939X: 1455 product_str = "LSIFC939X A1"; 1456 break; 1457 case MPI_MANUFACTPAGE_DEVICEID_FC949X: 1458 product_str = "LSIFC949X A1"; 1459 break; 1460 case MPI_MANUFACTPAGE_DEVICEID_FC949E: 1461 switch (revision) 1462 { 1463 case 0x00: 1464 product_str = "LSIFC949E A0"; 1465 break; 1466 case 0x01: 1467 product_str = "LSIFC949E A1"; 1468 break; 1469 default: 1470 product_str = "LSIFC949E"; 1471 break; 1472 } 1473 break; 1474 case MPI_MANUFACTPAGE_DEVID_53C1030: 1475 switch (revision) 1476 { 1477 case 0x00: 1478 product_str = "LSI53C1030 A0"; 1479 break; 1480 case 0x01: 1481 product_str = "LSI53C1030 B0"; 1482 break; 1483 case 0x03: 1484 product_str = "LSI53C1030 B1"; 1485 break; 1486 case 0x07: 1487 product_str = "LSI53C1030 B2"; 1488 break; 1489 case 0x08: 1490 product_str = "LSI53C1030 C0"; 1491 break; 1492 case 0x80: 1493 product_str = "LSI53C1030T A0"; 1494 break; 1495 case 0x83: 1496 product_str = "LSI53C1030T A2"; 1497 break; 1498 case 0x87: 1499 product_str = "LSI53C1030T A3"; 1500 break; 1501 case 0xc1: 1502 product_str = "LSI53C1020A A1"; 1503 break; 1504 default: 1505 product_str = "LSI53C1030"; 1506 break; 1507 } 1508 break; 1509 case MPI_MANUFACTPAGE_DEVID_1030_53C1035: 1510 switch (revision) 1511 { 1512 case 0x03: 1513 product_str = "LSI53C1035 A2"; 1514 break; 1515 case 0x04: 1516 product_str = "LSI53C1035 B0"; 1517 break; 1518 default: 1519 product_str = "LSI53C1035"; 1520 break; 1521 } 1522 break; 1523 case MPI_MANUFACTPAGE_DEVID_SAS1064: 1524 switch (revision) 1525 { 1526 case 0x00: 1527 product_str = "LSISAS1064 A1"; 1528 break; 1529 case 0x01: 1530 product_str = "LSISAS1064 A2"; 1531 break; 1532 case 0x02: 1533 product_str = "LSISAS1064 A3"; 1534 break; 1535 case 0x03: 1536 product_str = "LSISAS1064 A4"; 1537 break; 1538 default: 1539 product_str = "LSISAS1064"; 1540 break; 1541 } 1542 break; 1543 case MPI_MANUFACTPAGE_DEVID_SAS1064E: 1544 switch (revision) 1545 { 1546 case 0x00: 1547 product_str = "LSISAS1064E A0"; 1548 break; 1549 case 0x01: 1550 product_str = "LSISAS1064E B0"; 1551 break; 1552 case 0x02: 1553 product_str = "LSISAS1064E B1"; 1554 break; 1555 case 0x04: 1556 product_str = "LSISAS1064E B2"; 1557 break; 1558 case 0x08: 1559 product_str = "LSISAS1064E B3"; 1560 break; 1561 default: 1562 product_str = "LSISAS1064E"; 1563 break; 1564 } 1565 break; 1566 case MPI_MANUFACTPAGE_DEVID_SAS1068: 1567 switch (revision) 1568 { 1569 case 0x00: 1570 product_str = "LSISAS1068 A0"; 1571 break; 1572 case 0x01: 1573 product_str = "LSISAS1068 B0"; 1574 break; 1575 case 0x02: 1576 product_str = "LSISAS1068 B1"; 1577 break; 1578 default: 1579 product_str = "LSISAS1068"; 1580 break; 1581 } 1582 break; 1583 case MPI_MANUFACTPAGE_DEVID_SAS1068E: 1584 switch (revision) 1585 { 1586 case 0x00: 1587 product_str = "LSISAS1068E A0"; 1588 break; 1589 case 0x01: 1590 product_str = "LSISAS1068E B0"; 1591 break; 1592 case 0x02: 1593 product_str = "LSISAS1068E B1"; 1594 break; 1595 case 0x04: 1596 product_str = "LSISAS1068E B2"; 1597 break; 1598 case 0x08: 1599 product_str = "LSISAS1068E B3"; 1600 break; 1601 default: 1602 product_str = "LSISAS1068E"; 1603 break; 1604 } 1605 break; 1606 case MPI_MANUFACTPAGE_DEVID_SAS1078: 1607 switch (revision) 1608 { 1609 case 0x00: 1610 product_str = "LSISAS1078 A0"; 1611 break; 1612 case 0x01: 1613 product_str = "LSISAS1078 B0"; 1614 break; 1615 case 0x02: 1616 product_str = "LSISAS1078 C0"; 1617 break; 1618 case 0x03: 1619 product_str = "LSISAS1078 C1"; 1620 break; 1621 case 0x04: 1622 product_str = "LSISAS1078 C2"; 1623 break; 1624 default: 1625 product_str = "LSISAS1078"; 1626 break; 1627 } 1628 break; 1629 } 1630 1631 out: 1632 return product_str; 1633 } 1634 1635 /** 1636 * mpt_mapresources - map in memory mapped io 1637 * @ioc: Pointer to pointer to IOC adapter 1638 * 1639 **/ 1640 static int 1641 mpt_mapresources(MPT_ADAPTER *ioc) 1642 { 1643 u8 __iomem *mem; 1644 int ii; 1645 resource_size_t mem_phys; 1646 unsigned long port; 1647 u32 msize; 1648 u32 psize; 1649 int r = -ENODEV; 1650 struct pci_dev *pdev; 1651 1652 pdev = ioc->pcidev; 1653 ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM); 1654 if (pci_enable_device_mem(pdev)) { 1655 printk(MYIOC_s_ERR_FMT "pci_enable_device_mem() " 1656 "failed\n", ioc->name); 1657 return r; 1658 } 1659 if (pci_request_selected_regions(pdev, ioc->bars, "mpt")) { 1660 printk(MYIOC_s_ERR_FMT "pci_request_selected_regions() with " 1661 "MEM failed\n", ioc->name); 1662 goto out_pci_disable_device; 1663 } 1664 1665 if (sizeof(dma_addr_t) > 4) { 1666 const uint64_t required_mask = dma_get_required_mask 1667 (&pdev->dev); 1668 if (required_mask > DMA_BIT_MASK(32) 1669 && !pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) 1670 && !pci_set_consistent_dma_mask(pdev, 1671 DMA_BIT_MASK(64))) { 1672 ioc->dma_mask = DMA_BIT_MASK(64); 1673 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT 1674 ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n", 1675 ioc->name)); 1676 } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) 1677 && !pci_set_consistent_dma_mask(pdev, 1678 DMA_BIT_MASK(32))) { 1679 ioc->dma_mask = DMA_BIT_MASK(32); 1680 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT 1681 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n", 1682 ioc->name)); 1683 } else { 1684 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n", 1685 ioc->name, pci_name(pdev)); 1686 goto out_pci_release_region; 1687 } 1688 } else { 1689 if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) 1690 && !pci_set_consistent_dma_mask(pdev, 1691 DMA_BIT_MASK(32))) { 1692 ioc->dma_mask = DMA_BIT_MASK(32); 1693 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT 1694 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n", 1695 ioc->name)); 1696 } else { 1697 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n", 1698 ioc->name, pci_name(pdev)); 1699 goto out_pci_release_region; 1700 } 1701 } 1702 1703 mem_phys = msize = 0; 1704 port = psize = 0; 1705 for (ii = 0; ii < DEVICE_COUNT_RESOURCE; ii++) { 1706 if (pci_resource_flags(pdev, ii) & PCI_BASE_ADDRESS_SPACE_IO) { 1707 if (psize) 1708 continue; 1709 /* Get I/O space! */ 1710 port = pci_resource_start(pdev, ii); 1711 psize = pci_resource_len(pdev, ii); 1712 } else { 1713 if (msize) 1714 continue; 1715 /* Get memmap */ 1716 mem_phys = pci_resource_start(pdev, ii); 1717 msize = pci_resource_len(pdev, ii); 1718 } 1719 } 1720 ioc->mem_size = msize; 1721 1722 mem = NULL; 1723 /* Get logical ptr for PciMem0 space */ 1724 /*mem = ioremap(mem_phys, msize);*/ 1725 mem = ioremap(mem_phys, msize); 1726 if (mem == NULL) { 1727 printk(MYIOC_s_ERR_FMT ": ERROR - Unable to map adapter" 1728 " memory!\n", ioc->name); 1729 r = -EINVAL; 1730 goto out_pci_release_region; 1731 } 1732 ioc->memmap = mem; 1733 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %llx\n", 1734 ioc->name, mem, (unsigned long long)mem_phys)); 1735 1736 ioc->mem_phys = mem_phys; 1737 ioc->chip = (SYSIF_REGS __iomem *)mem; 1738 1739 /* Save Port IO values in case we need to do downloadboot */ 1740 ioc->pio_mem_phys = port; 1741 ioc->pio_chip = (SYSIF_REGS __iomem *)port; 1742 1743 return 0; 1744 1745 out_pci_release_region: 1746 pci_release_selected_regions(pdev, ioc->bars); 1747 out_pci_disable_device: 1748 pci_disable_device(pdev); 1749 return r; 1750 } 1751 1752 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1753 /** 1754 * mpt_attach - Install a PCI intelligent MPT adapter. 1755 * @pdev: Pointer to pci_dev structure 1756 * @id: PCI device ID information 1757 * 1758 * This routine performs all the steps necessary to bring the IOC of 1759 * a MPT adapter to a OPERATIONAL state. This includes registering 1760 * memory regions, registering the interrupt, and allocating request 1761 * and reply memory pools. 1762 * 1763 * This routine also pre-fetches the LAN MAC address of a Fibre Channel 1764 * MPT adapter. 1765 * 1766 * Returns 0 for success, non-zero for failure. 1767 * 1768 * TODO: Add support for polled controllers 1769 */ 1770 int 1771 mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) 1772 { 1773 MPT_ADAPTER *ioc; 1774 u8 cb_idx; 1775 int r = -ENODEV; 1776 u8 pcixcmd; 1777 static int mpt_ids = 0; 1778 #ifdef CONFIG_PROC_FS 1779 struct proc_dir_entry *dent; 1780 #endif 1781 1782 ioc = kzalloc(sizeof(MPT_ADAPTER), GFP_ATOMIC); 1783 if (ioc == NULL) { 1784 printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n"); 1785 return -ENOMEM; 1786 } 1787 1788 ioc->id = mpt_ids++; 1789 sprintf(ioc->name, "ioc%d", ioc->id); 1790 dinitprintk(ioc, printk(KERN_WARNING MYNAM ": mpt_adapter_install\n")); 1791 1792 /* 1793 * set initial debug level 1794 * (refer to mptdebug.h) 1795 * 1796 */ 1797 ioc->debug_level = mpt_debug_level; 1798 if (mpt_debug_level) 1799 printk(KERN_INFO "mpt_debug_level=%xh\n", mpt_debug_level); 1800 1801 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": mpt_adapter_install\n", ioc->name)); 1802 1803 ioc->pcidev = pdev; 1804 if (mpt_mapresources(ioc)) { 1805 goto out_free_ioc; 1806 } 1807 1808 /* 1809 * Setting up proper handlers for scatter gather handling 1810 */ 1811 if (ioc->dma_mask == DMA_BIT_MASK(64)) { 1812 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) 1813 ioc->add_sge = &mpt_add_sge_64bit_1078; 1814 else 1815 ioc->add_sge = &mpt_add_sge_64bit; 1816 ioc->add_chain = &mpt_add_chain_64bit; 1817 ioc->sg_addr_size = 8; 1818 } else { 1819 ioc->add_sge = &mpt_add_sge; 1820 ioc->add_chain = &mpt_add_chain; 1821 ioc->sg_addr_size = 4; 1822 } 1823 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size; 1824 1825 ioc->alloc_total = sizeof(MPT_ADAPTER); 1826 ioc->req_sz = MPT_DEFAULT_FRAME_SIZE; /* avoid div by zero! */ 1827 ioc->reply_sz = MPT_REPLY_FRAME_SIZE; 1828 1829 1830 spin_lock_init(&ioc->taskmgmt_lock); 1831 mutex_init(&ioc->internal_cmds.mutex); 1832 init_completion(&ioc->internal_cmds.done); 1833 mutex_init(&ioc->mptbase_cmds.mutex); 1834 init_completion(&ioc->mptbase_cmds.done); 1835 mutex_init(&ioc->taskmgmt_cmds.mutex); 1836 init_completion(&ioc->taskmgmt_cmds.done); 1837 1838 /* Initialize the event logging. 1839 */ 1840 ioc->eventTypes = 0; /* None */ 1841 ioc->eventContext = 0; 1842 ioc->eventLogSize = 0; 1843 ioc->events = NULL; 1844 1845 #ifdef MFCNT 1846 ioc->mfcnt = 0; 1847 #endif 1848 1849 ioc->sh = NULL; 1850 ioc->cached_fw = NULL; 1851 1852 /* Initialize SCSI Config Data structure 1853 */ 1854 memset(&ioc->spi_data, 0, sizeof(SpiCfgData)); 1855 1856 /* Initialize the fc rport list head. 1857 */ 1858 INIT_LIST_HEAD(&ioc->fc_rports); 1859 1860 /* Find lookup slot. */ 1861 INIT_LIST_HEAD(&ioc->list); 1862 1863 1864 /* Initialize workqueue */ 1865 INIT_DELAYED_WORK(&ioc->fault_reset_work, mpt_fault_reset_work); 1866 1867 snprintf(ioc->reset_work_q_name, MPT_KOBJ_NAME_LEN, 1868 "mpt_poll_%d", ioc->id); 1869 ioc->reset_work_q = alloc_workqueue(ioc->reset_work_q_name, 1870 WQ_MEM_RECLAIM, 0); 1871 if (!ioc->reset_work_q) { 1872 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n", 1873 ioc->name); 1874 r = -ENOMEM; 1875 goto out_unmap_resources; 1876 } 1877 1878 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "facts @ %p, pfacts[0] @ %p\n", 1879 ioc->name, &ioc->facts, &ioc->pfacts[0])); 1880 1881 ioc->prod_name = mpt_get_product_name(pdev->vendor, pdev->device, 1882 pdev->revision); 1883 1884 switch (pdev->device) 1885 { 1886 case MPI_MANUFACTPAGE_DEVICEID_FC939X: 1887 case MPI_MANUFACTPAGE_DEVICEID_FC949X: 1888 ioc->errata_flag_1064 = 1; 1889 case MPI_MANUFACTPAGE_DEVICEID_FC909: 1890 case MPI_MANUFACTPAGE_DEVICEID_FC929: 1891 case MPI_MANUFACTPAGE_DEVICEID_FC919: 1892 case MPI_MANUFACTPAGE_DEVICEID_FC949E: 1893 ioc->bus_type = FC; 1894 break; 1895 1896 case MPI_MANUFACTPAGE_DEVICEID_FC929X: 1897 if (pdev->revision < XL_929) { 1898 /* 929X Chip Fix. Set Split transactions level 1899 * for PCIX. Set MOST bits to zero. 1900 */ 1901 pci_read_config_byte(pdev, 0x6a, &pcixcmd); 1902 pcixcmd &= 0x8F; 1903 pci_write_config_byte(pdev, 0x6a, pcixcmd); 1904 } else { 1905 /* 929XL Chip Fix. Set MMRBC to 0x08. 1906 */ 1907 pci_read_config_byte(pdev, 0x6a, &pcixcmd); 1908 pcixcmd |= 0x08; 1909 pci_write_config_byte(pdev, 0x6a, pcixcmd); 1910 } 1911 ioc->bus_type = FC; 1912 break; 1913 1914 case MPI_MANUFACTPAGE_DEVICEID_FC919X: 1915 /* 919X Chip Fix. Set Split transactions level 1916 * for PCIX. Set MOST bits to zero. 1917 */ 1918 pci_read_config_byte(pdev, 0x6a, &pcixcmd); 1919 pcixcmd &= 0x8F; 1920 pci_write_config_byte(pdev, 0x6a, pcixcmd); 1921 ioc->bus_type = FC; 1922 break; 1923 1924 case MPI_MANUFACTPAGE_DEVID_53C1030: 1925 /* 1030 Chip Fix. Disable Split transactions 1926 * for PCIX. Set MOST bits to zero if Rev < C0( = 8). 1927 */ 1928 if (pdev->revision < C0_1030) { 1929 pci_read_config_byte(pdev, 0x6a, &pcixcmd); 1930 pcixcmd &= 0x8F; 1931 pci_write_config_byte(pdev, 0x6a, pcixcmd); 1932 } 1933 1934 case MPI_MANUFACTPAGE_DEVID_1030_53C1035: 1935 ioc->bus_type = SPI; 1936 break; 1937 1938 case MPI_MANUFACTPAGE_DEVID_SAS1064: 1939 case MPI_MANUFACTPAGE_DEVID_SAS1068: 1940 ioc->errata_flag_1064 = 1; 1941 ioc->bus_type = SAS; 1942 break; 1943 1944 case MPI_MANUFACTPAGE_DEVID_SAS1064E: 1945 case MPI_MANUFACTPAGE_DEVID_SAS1068E: 1946 case MPI_MANUFACTPAGE_DEVID_SAS1078: 1947 ioc->bus_type = SAS; 1948 break; 1949 } 1950 1951 1952 switch (ioc->bus_type) { 1953 1954 case SAS: 1955 ioc->msi_enable = mpt_msi_enable_sas; 1956 break; 1957 1958 case SPI: 1959 ioc->msi_enable = mpt_msi_enable_spi; 1960 break; 1961 1962 case FC: 1963 ioc->msi_enable = mpt_msi_enable_fc; 1964 break; 1965 1966 default: 1967 ioc->msi_enable = 0; 1968 break; 1969 } 1970 1971 ioc->fw_events_off = 1; 1972 1973 if (ioc->errata_flag_1064) 1974 pci_disable_io_access(pdev); 1975 1976 spin_lock_init(&ioc->FreeQlock); 1977 1978 /* Disable all! */ 1979 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); 1980 ioc->active = 0; 1981 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 1982 1983 /* Set IOC ptr in the pcidev's driver data. */ 1984 pci_set_drvdata(ioc->pcidev, ioc); 1985 1986 /* Set lookup ptr. */ 1987 list_add_tail(&ioc->list, &ioc_list); 1988 1989 /* Check for "bound ports" (929, 929X, 1030, 1035) to reduce redundant resets. 1990 */ 1991 mpt_detect_bound_ports(ioc, pdev); 1992 1993 INIT_LIST_HEAD(&ioc->fw_event_list); 1994 spin_lock_init(&ioc->fw_event_lock); 1995 snprintf(ioc->fw_event_q_name, MPT_KOBJ_NAME_LEN, "mpt/%d", ioc->id); 1996 ioc->fw_event_q = alloc_workqueue(ioc->fw_event_q_name, 1997 WQ_MEM_RECLAIM, 0); 1998 if (!ioc->fw_event_q) { 1999 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n", 2000 ioc->name); 2001 r = -ENOMEM; 2002 goto out_remove_ioc; 2003 } 2004 2005 if ((r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP, 2006 CAN_SLEEP)) != 0){ 2007 printk(MYIOC_s_ERR_FMT "didn't initialize properly! (%d)\n", 2008 ioc->name, r); 2009 2010 destroy_workqueue(ioc->fw_event_q); 2011 ioc->fw_event_q = NULL; 2012 2013 list_del(&ioc->list); 2014 if (ioc->alt_ioc) 2015 ioc->alt_ioc->alt_ioc = NULL; 2016 iounmap(ioc->memmap); 2017 if (pci_is_enabled(pdev)) 2018 pci_disable_device(pdev); 2019 if (r != -5) 2020 pci_release_selected_regions(pdev, ioc->bars); 2021 2022 destroy_workqueue(ioc->reset_work_q); 2023 ioc->reset_work_q = NULL; 2024 2025 kfree(ioc); 2026 return r; 2027 } 2028 2029 /* call per device driver probe entry point */ 2030 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) { 2031 if(MptDeviceDriverHandlers[cb_idx] && 2032 MptDeviceDriverHandlers[cb_idx]->probe) { 2033 MptDeviceDriverHandlers[cb_idx]->probe(pdev,id); 2034 } 2035 } 2036 2037 #ifdef CONFIG_PROC_FS 2038 /* 2039 * Create "/proc/mpt/iocN" subdirectory entry for each MPT adapter. 2040 */ 2041 dent = proc_mkdir(ioc->name, mpt_proc_root_dir); 2042 if (dent) { 2043 proc_create_data("info", S_IRUGO, dent, &mpt_iocinfo_proc_fops, ioc); 2044 proc_create_data("summary", S_IRUGO, dent, &mpt_summary_proc_fops, ioc); 2045 } 2046 #endif 2047 2048 if (!ioc->alt_ioc) 2049 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work, 2050 msecs_to_jiffies(MPT_POLLING_INTERVAL)); 2051 2052 return 0; 2053 2054 out_remove_ioc: 2055 list_del(&ioc->list); 2056 if (ioc->alt_ioc) 2057 ioc->alt_ioc->alt_ioc = NULL; 2058 2059 destroy_workqueue(ioc->reset_work_q); 2060 ioc->reset_work_q = NULL; 2061 2062 out_unmap_resources: 2063 iounmap(ioc->memmap); 2064 pci_disable_device(pdev); 2065 pci_release_selected_regions(pdev, ioc->bars); 2066 2067 out_free_ioc: 2068 kfree(ioc); 2069 2070 return r; 2071 } 2072 2073 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2074 /** 2075 * mpt_detach - Remove a PCI intelligent MPT adapter. 2076 * @pdev: Pointer to pci_dev structure 2077 */ 2078 2079 void 2080 mpt_detach(struct pci_dev *pdev) 2081 { 2082 MPT_ADAPTER *ioc = pci_get_drvdata(pdev); 2083 char pname[64]; 2084 u8 cb_idx; 2085 unsigned long flags; 2086 struct workqueue_struct *wq; 2087 2088 /* 2089 * Stop polling ioc for fault condition 2090 */ 2091 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 2092 wq = ioc->reset_work_q; 2093 ioc->reset_work_q = NULL; 2094 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 2095 cancel_delayed_work(&ioc->fault_reset_work); 2096 destroy_workqueue(wq); 2097 2098 spin_lock_irqsave(&ioc->fw_event_lock, flags); 2099 wq = ioc->fw_event_q; 2100 ioc->fw_event_q = NULL; 2101 spin_unlock_irqrestore(&ioc->fw_event_lock, flags); 2102 destroy_workqueue(wq); 2103 2104 snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s/summary", ioc->name); 2105 remove_proc_entry(pname, NULL); 2106 snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s/info", ioc->name); 2107 remove_proc_entry(pname, NULL); 2108 snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s", ioc->name); 2109 remove_proc_entry(pname, NULL); 2110 2111 /* call per device driver remove entry point */ 2112 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) { 2113 if(MptDeviceDriverHandlers[cb_idx] && 2114 MptDeviceDriverHandlers[cb_idx]->remove) { 2115 MptDeviceDriverHandlers[cb_idx]->remove(pdev); 2116 } 2117 } 2118 2119 /* Disable interrupts! */ 2120 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); 2121 2122 ioc->active = 0; 2123 synchronize_irq(pdev->irq); 2124 2125 /* Clear any lingering interrupt */ 2126 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 2127 2128 CHIPREG_READ32(&ioc->chip->IntStatus); 2129 2130 mpt_adapter_dispose(ioc); 2131 2132 } 2133 2134 /************************************************************************** 2135 * Power Management 2136 */ 2137 #ifdef CONFIG_PM 2138 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2139 /** 2140 * mpt_suspend - Fusion MPT base driver suspend routine. 2141 * @pdev: Pointer to pci_dev structure 2142 * @state: new state to enter 2143 */ 2144 int 2145 mpt_suspend(struct pci_dev *pdev, pm_message_t state) 2146 { 2147 u32 device_state; 2148 MPT_ADAPTER *ioc = pci_get_drvdata(pdev); 2149 2150 device_state = pci_choose_state(pdev, state); 2151 printk(MYIOC_s_INFO_FMT "pci-suspend: pdev=0x%p, slot=%s, Entering " 2152 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev), 2153 device_state); 2154 2155 /* put ioc into READY_STATE */ 2156 if (SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, CAN_SLEEP)) { 2157 printk(MYIOC_s_ERR_FMT 2158 "pci-suspend: IOC msg unit reset failed!\n", ioc->name); 2159 } 2160 2161 /* disable interrupts */ 2162 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); 2163 ioc->active = 0; 2164 2165 /* Clear any lingering interrupt */ 2166 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 2167 2168 free_irq(ioc->pci_irq, ioc); 2169 if (ioc->msi_enable) 2170 pci_disable_msi(ioc->pcidev); 2171 ioc->pci_irq = -1; 2172 pci_save_state(pdev); 2173 pci_disable_device(pdev); 2174 pci_release_selected_regions(pdev, ioc->bars); 2175 pci_set_power_state(pdev, device_state); 2176 return 0; 2177 } 2178 2179 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2180 /** 2181 * mpt_resume - Fusion MPT base driver resume routine. 2182 * @pdev: Pointer to pci_dev structure 2183 */ 2184 int 2185 mpt_resume(struct pci_dev *pdev) 2186 { 2187 MPT_ADAPTER *ioc = pci_get_drvdata(pdev); 2188 u32 device_state = pdev->current_state; 2189 int recovery_state; 2190 int err; 2191 2192 printk(MYIOC_s_INFO_FMT "pci-resume: pdev=0x%p, slot=%s, Previous " 2193 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev), 2194 device_state); 2195 2196 pci_set_power_state(pdev, PCI_D0); 2197 pci_enable_wake(pdev, PCI_D0, 0); 2198 pci_restore_state(pdev); 2199 ioc->pcidev = pdev; 2200 err = mpt_mapresources(ioc); 2201 if (err) 2202 return err; 2203 2204 if (ioc->dma_mask == DMA_BIT_MASK(64)) { 2205 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) 2206 ioc->add_sge = &mpt_add_sge_64bit_1078; 2207 else 2208 ioc->add_sge = &mpt_add_sge_64bit; 2209 ioc->add_chain = &mpt_add_chain_64bit; 2210 ioc->sg_addr_size = 8; 2211 } else { 2212 2213 ioc->add_sge = &mpt_add_sge; 2214 ioc->add_chain = &mpt_add_chain; 2215 ioc->sg_addr_size = 4; 2216 } 2217 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size; 2218 2219 printk(MYIOC_s_INFO_FMT "pci-resume: ioc-state=0x%x,doorbell=0x%x\n", 2220 ioc->name, (mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT), 2221 CHIPREG_READ32(&ioc->chip->Doorbell)); 2222 2223 /* 2224 * Errata workaround for SAS pci express: 2225 * Upon returning to the D0 state, the contents of the doorbell will be 2226 * stale data, and this will incorrectly signal to the host driver that 2227 * the firmware is ready to process mpt commands. The workaround is 2228 * to issue a diagnostic reset. 2229 */ 2230 if (ioc->bus_type == SAS && (pdev->device == 2231 MPI_MANUFACTPAGE_DEVID_SAS1068E || pdev->device == 2232 MPI_MANUFACTPAGE_DEVID_SAS1064E)) { 2233 if (KickStart(ioc, 1, CAN_SLEEP) < 0) { 2234 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover\n", 2235 ioc->name); 2236 goto out; 2237 } 2238 } 2239 2240 /* bring ioc to operational state */ 2241 printk(MYIOC_s_INFO_FMT "Sending mpt_do_ioc_recovery\n", ioc->name); 2242 recovery_state = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP, 2243 CAN_SLEEP); 2244 if (recovery_state != 0) 2245 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover, " 2246 "error:[%x]\n", ioc->name, recovery_state); 2247 else 2248 printk(MYIOC_s_INFO_FMT 2249 "pci-resume: success\n", ioc->name); 2250 out: 2251 return 0; 2252 2253 } 2254 #endif 2255 2256 static int 2257 mpt_signal_reset(u8 index, MPT_ADAPTER *ioc, int reset_phase) 2258 { 2259 if ((MptDriverClass[index] == MPTSPI_DRIVER && 2260 ioc->bus_type != SPI) || 2261 (MptDriverClass[index] == MPTFC_DRIVER && 2262 ioc->bus_type != FC) || 2263 (MptDriverClass[index] == MPTSAS_DRIVER && 2264 ioc->bus_type != SAS)) 2265 /* make sure we only call the relevant reset handler 2266 * for the bus */ 2267 return 0; 2268 return (MptResetHandlers[index])(ioc, reset_phase); 2269 } 2270 2271 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2272 /** 2273 * mpt_do_ioc_recovery - Initialize or recover MPT adapter. 2274 * @ioc: Pointer to MPT adapter structure 2275 * @reason: Event word / reason 2276 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay. 2277 * 2278 * This routine performs all the steps necessary to bring the IOC 2279 * to a OPERATIONAL state. 2280 * 2281 * This routine also pre-fetches the LAN MAC address of a Fibre Channel 2282 * MPT adapter. 2283 * 2284 * Returns: 2285 * 0 for success 2286 * -1 if failed to get board READY 2287 * -2 if READY but IOCFacts Failed 2288 * -3 if READY but PrimeIOCFifos Failed 2289 * -4 if READY but IOCInit Failed 2290 * -5 if failed to enable_device and/or request_selected_regions 2291 * -6 if failed to upload firmware 2292 */ 2293 static int 2294 mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) 2295 { 2296 int hard_reset_done = 0; 2297 int alt_ioc_ready = 0; 2298 int hard; 2299 int rc=0; 2300 int ii; 2301 int ret = 0; 2302 int reset_alt_ioc_active = 0; 2303 int irq_allocated = 0; 2304 u8 *a; 2305 2306 printk(MYIOC_s_INFO_FMT "Initiating %s\n", ioc->name, 2307 reason == MPT_HOSTEVENT_IOC_BRINGUP ? "bringup" : "recovery"); 2308 2309 /* Disable reply interrupts (also blocks FreeQ) */ 2310 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); 2311 ioc->active = 0; 2312 2313 if (ioc->alt_ioc) { 2314 if (ioc->alt_ioc->active || 2315 reason == MPT_HOSTEVENT_IOC_RECOVER) { 2316 reset_alt_ioc_active = 1; 2317 /* Disable alt-IOC's reply interrupts 2318 * (and FreeQ) for a bit 2319 **/ 2320 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, 2321 0xFFFFFFFF); 2322 ioc->alt_ioc->active = 0; 2323 } 2324 } 2325 2326 hard = 1; 2327 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) 2328 hard = 0; 2329 2330 if ((hard_reset_done = MakeIocReady(ioc, hard, sleepFlag)) < 0) { 2331 if (hard_reset_done == -4) { 2332 printk(MYIOC_s_WARN_FMT "Owned by PEER..skipping!\n", 2333 ioc->name); 2334 2335 if (reset_alt_ioc_active && ioc->alt_ioc) { 2336 /* (re)Enable alt-IOC! (reply interrupt, FreeQ) */ 2337 dprintk(ioc, printk(MYIOC_s_INFO_FMT 2338 "alt_ioc reply irq re-enabled\n", ioc->alt_ioc->name)); 2339 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, MPI_HIM_DIM); 2340 ioc->alt_ioc->active = 1; 2341 } 2342 2343 } else { 2344 printk(MYIOC_s_WARN_FMT 2345 "NOT READY WARNING!\n", ioc->name); 2346 } 2347 ret = -1; 2348 goto out; 2349 } 2350 2351 /* hard_reset_done = 0 if a soft reset was performed 2352 * and 1 if a hard reset was performed. 2353 */ 2354 if (hard_reset_done && reset_alt_ioc_active && ioc->alt_ioc) { 2355 if ((rc = MakeIocReady(ioc->alt_ioc, 0, sleepFlag)) == 0) 2356 alt_ioc_ready = 1; 2357 else 2358 printk(MYIOC_s_WARN_FMT 2359 ": alt-ioc Not ready WARNING!\n", 2360 ioc->alt_ioc->name); 2361 } 2362 2363 for (ii=0; ii<5; ii++) { 2364 /* Get IOC facts! Allow 5 retries */ 2365 if ((rc = GetIocFacts(ioc, sleepFlag, reason)) == 0) 2366 break; 2367 } 2368 2369 2370 if (ii == 5) { 2371 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2372 "Retry IocFacts failed rc=%x\n", ioc->name, rc)); 2373 ret = -2; 2374 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) { 2375 MptDisplayIocCapabilities(ioc); 2376 } 2377 2378 if (alt_ioc_ready) { 2379 if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason)) != 0) { 2380 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2381 "Initial Alt IocFacts failed rc=%x\n", 2382 ioc->name, rc)); 2383 /* Retry - alt IOC was initialized once 2384 */ 2385 rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason); 2386 } 2387 if (rc) { 2388 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2389 "Retry Alt IocFacts failed rc=%x\n", ioc->name, rc)); 2390 alt_ioc_ready = 0; 2391 reset_alt_ioc_active = 0; 2392 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) { 2393 MptDisplayIocCapabilities(ioc->alt_ioc); 2394 } 2395 } 2396 2397 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP) && 2398 (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)) { 2399 pci_release_selected_regions(ioc->pcidev, ioc->bars); 2400 ioc->bars = pci_select_bars(ioc->pcidev, IORESOURCE_MEM | 2401 IORESOURCE_IO); 2402 if (pci_enable_device(ioc->pcidev)) 2403 return -5; 2404 if (pci_request_selected_regions(ioc->pcidev, ioc->bars, 2405 "mpt")) 2406 return -5; 2407 } 2408 2409 /* 2410 * Device is reset now. It must have de-asserted the interrupt line 2411 * (if it was asserted) and it should be safe to register for the 2412 * interrupt now. 2413 */ 2414 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) { 2415 ioc->pci_irq = -1; 2416 if (ioc->pcidev->irq) { 2417 if (ioc->msi_enable && !pci_enable_msi(ioc->pcidev)) 2418 printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n", 2419 ioc->name); 2420 else 2421 ioc->msi_enable = 0; 2422 rc = request_irq(ioc->pcidev->irq, mpt_interrupt, 2423 IRQF_SHARED, ioc->name, ioc); 2424 if (rc < 0) { 2425 printk(MYIOC_s_ERR_FMT "Unable to allocate " 2426 "interrupt %d!\n", 2427 ioc->name, ioc->pcidev->irq); 2428 if (ioc->msi_enable) 2429 pci_disable_msi(ioc->pcidev); 2430 ret = -EBUSY; 2431 goto out; 2432 } 2433 irq_allocated = 1; 2434 ioc->pci_irq = ioc->pcidev->irq; 2435 pci_set_master(ioc->pcidev); /* ?? */ 2436 pci_set_drvdata(ioc->pcidev, ioc); 2437 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT 2438 "installed at interrupt %d\n", ioc->name, 2439 ioc->pcidev->irq)); 2440 } 2441 } 2442 2443 /* Prime reply & request queues! 2444 * (mucho alloc's) Must be done prior to 2445 * init as upper addresses are needed for init. 2446 * If fails, continue with alt-ioc processing 2447 */ 2448 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "PrimeIocFifos\n", 2449 ioc->name)); 2450 if ((ret == 0) && ((rc = PrimeIocFifos(ioc)) != 0)) 2451 ret = -3; 2452 2453 /* May need to check/upload firmware & data here! 2454 * If fails, continue with alt-ioc processing 2455 */ 2456 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "SendIocInit\n", 2457 ioc->name)); 2458 if ((ret == 0) && ((rc = SendIocInit(ioc, sleepFlag)) != 0)) 2459 ret = -4; 2460 // NEW! 2461 if (alt_ioc_ready && ((rc = PrimeIocFifos(ioc->alt_ioc)) != 0)) { 2462 printk(MYIOC_s_WARN_FMT 2463 ": alt-ioc (%d) FIFO mgmt alloc WARNING!\n", 2464 ioc->alt_ioc->name, rc); 2465 alt_ioc_ready = 0; 2466 reset_alt_ioc_active = 0; 2467 } 2468 2469 if (alt_ioc_ready) { 2470 if ((rc = SendIocInit(ioc->alt_ioc, sleepFlag)) != 0) { 2471 alt_ioc_ready = 0; 2472 reset_alt_ioc_active = 0; 2473 printk(MYIOC_s_WARN_FMT 2474 ": alt-ioc: (%d) init failure WARNING!\n", 2475 ioc->alt_ioc->name, rc); 2476 } 2477 } 2478 2479 if (reason == MPT_HOSTEVENT_IOC_BRINGUP){ 2480 if (ioc->upload_fw) { 2481 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2482 "firmware upload required!\n", ioc->name)); 2483 2484 /* Controller is not operational, cannot do upload 2485 */ 2486 if (ret == 0) { 2487 rc = mpt_do_upload(ioc, sleepFlag); 2488 if (rc == 0) { 2489 if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) { 2490 /* 2491 * Maintain only one pointer to FW memory 2492 * so there will not be two attempt to 2493 * downloadboot onboard dual function 2494 * chips (mpt_adapter_disable, 2495 * mpt_diag_reset) 2496 */ 2497 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2498 "mpt_upload: alt_%s has cached_fw=%p \n", 2499 ioc->name, ioc->alt_ioc->name, ioc->alt_ioc->cached_fw)); 2500 ioc->cached_fw = NULL; 2501 } 2502 } else { 2503 printk(MYIOC_s_WARN_FMT 2504 "firmware upload failure!\n", ioc->name); 2505 ret = -6; 2506 } 2507 } 2508 } 2509 } 2510 2511 /* Enable MPT base driver management of EventNotification 2512 * and EventAck handling. 2513 */ 2514 if ((ret == 0) && (!ioc->facts.EventState)) { 2515 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT 2516 "SendEventNotification\n", 2517 ioc->name)); 2518 ret = SendEventNotification(ioc, 1, sleepFlag); /* 1=Enable */ 2519 } 2520 2521 if (ioc->alt_ioc && alt_ioc_ready && !ioc->alt_ioc->facts.EventState) 2522 rc = SendEventNotification(ioc->alt_ioc, 1, sleepFlag); 2523 2524 if (ret == 0) { 2525 /* Enable! (reply interrupt) */ 2526 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM); 2527 ioc->active = 1; 2528 } 2529 if (rc == 0) { /* alt ioc */ 2530 if (reset_alt_ioc_active && ioc->alt_ioc) { 2531 /* (re)Enable alt-IOC! (reply interrupt) */ 2532 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "alt-ioc" 2533 "reply irq re-enabled\n", 2534 ioc->alt_ioc->name)); 2535 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, 2536 MPI_HIM_DIM); 2537 ioc->alt_ioc->active = 1; 2538 } 2539 } 2540 2541 2542 /* Add additional "reason" check before call to GetLanConfigPages 2543 * (combined with GetIoUnitPage2 call). This prevents a somewhat 2544 * recursive scenario; GetLanConfigPages times out, timer expired 2545 * routine calls HardResetHandler, which calls into here again, 2546 * and we try GetLanConfigPages again... 2547 */ 2548 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) { 2549 2550 /* 2551 * Initialize link list for inactive raid volumes. 2552 */ 2553 mutex_init(&ioc->raid_data.inactive_list_mutex); 2554 INIT_LIST_HEAD(&ioc->raid_data.inactive_list); 2555 2556 switch (ioc->bus_type) { 2557 2558 case SAS: 2559 /* clear persistency table */ 2560 if(ioc->facts.IOCExceptions & 2561 MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL) { 2562 ret = mptbase_sas_persist_operation(ioc, 2563 MPI_SAS_OP_CLEAR_NOT_PRESENT); 2564 if(ret != 0) 2565 goto out; 2566 } 2567 2568 /* Find IM volumes 2569 */ 2570 mpt_findImVolumes(ioc); 2571 2572 /* Check, and possibly reset, the coalescing value 2573 */ 2574 mpt_read_ioc_pg_1(ioc); 2575 2576 break; 2577 2578 case FC: 2579 if ((ioc->pfacts[0].ProtocolFlags & 2580 MPI_PORTFACTS_PROTOCOL_LAN) && 2581 (ioc->lan_cnfg_page0.Header.PageLength == 0)) { 2582 /* 2583 * Pre-fetch the ports LAN MAC address! 2584 * (LANPage1_t stuff) 2585 */ 2586 (void) GetLanConfigPages(ioc); 2587 a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow; 2588 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2589 "LanAddr = %pMR\n", ioc->name, a)); 2590 } 2591 break; 2592 2593 case SPI: 2594 /* Get NVRAM and adapter maximums from SPP 0 and 2 2595 */ 2596 mpt_GetScsiPortSettings(ioc, 0); 2597 2598 /* Get version and length of SDP 1 2599 */ 2600 mpt_readScsiDevicePageHeaders(ioc, 0); 2601 2602 /* Find IM volumes 2603 */ 2604 if (ioc->facts.MsgVersion >= MPI_VERSION_01_02) 2605 mpt_findImVolumes(ioc); 2606 2607 /* Check, and possibly reset, the coalescing value 2608 */ 2609 mpt_read_ioc_pg_1(ioc); 2610 2611 mpt_read_ioc_pg_4(ioc); 2612 2613 break; 2614 } 2615 2616 GetIoUnitPage2(ioc); 2617 mpt_get_manufacturing_pg_0(ioc); 2618 } 2619 2620 out: 2621 if ((ret != 0) && irq_allocated) { 2622 free_irq(ioc->pci_irq, ioc); 2623 if (ioc->msi_enable) 2624 pci_disable_msi(ioc->pcidev); 2625 } 2626 return ret; 2627 } 2628 2629 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2630 /** 2631 * mpt_detect_bound_ports - Search for matching PCI bus/dev_function 2632 * @ioc: Pointer to MPT adapter structure 2633 * @pdev: Pointer to (struct pci_dev) structure 2634 * 2635 * Search for PCI bus/dev_function which matches 2636 * PCI bus/dev_function (+/-1) for newly discovered 929, 2637 * 929X, 1030 or 1035. 2638 * 2639 * If match on PCI dev_function +/-1 is found, bind the two MPT adapters 2640 * using alt_ioc pointer fields in their %MPT_ADAPTER structures. 2641 */ 2642 static void 2643 mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev) 2644 { 2645 struct pci_dev *peer=NULL; 2646 unsigned int slot = PCI_SLOT(pdev->devfn); 2647 unsigned int func = PCI_FUNC(pdev->devfn); 2648 MPT_ADAPTER *ioc_srch; 2649 2650 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PCI device %s devfn=%x/%x," 2651 " searching for devfn match on %x or %x\n", 2652 ioc->name, pci_name(pdev), pdev->bus->number, 2653 pdev->devfn, func-1, func+1)); 2654 2655 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func-1)); 2656 if (!peer) { 2657 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func+1)); 2658 if (!peer) 2659 return; 2660 } 2661 2662 list_for_each_entry(ioc_srch, &ioc_list, list) { 2663 struct pci_dev *_pcidev = ioc_srch->pcidev; 2664 if (_pcidev == peer) { 2665 /* Paranoia checks */ 2666 if (ioc->alt_ioc != NULL) { 2667 printk(MYIOC_s_WARN_FMT 2668 "Oops, already bound (%s <==> %s)!\n", 2669 ioc->name, ioc->name, ioc->alt_ioc->name); 2670 break; 2671 } else if (ioc_srch->alt_ioc != NULL) { 2672 printk(MYIOC_s_WARN_FMT 2673 "Oops, already bound (%s <==> %s)!\n", 2674 ioc_srch->name, ioc_srch->name, 2675 ioc_srch->alt_ioc->name); 2676 break; 2677 } 2678 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2679 "FOUND! binding %s <==> %s\n", 2680 ioc->name, ioc->name, ioc_srch->name)); 2681 ioc_srch->alt_ioc = ioc; 2682 ioc->alt_ioc = ioc_srch; 2683 } 2684 } 2685 pci_dev_put(peer); 2686 } 2687 2688 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2689 /** 2690 * mpt_adapter_disable - Disable misbehaving MPT adapter. 2691 * @ioc: Pointer to MPT adapter structure 2692 */ 2693 static void 2694 mpt_adapter_disable(MPT_ADAPTER *ioc) 2695 { 2696 int sz; 2697 int ret; 2698 2699 if (ioc->cached_fw != NULL) { 2700 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2701 "%s: Pushing FW onto adapter\n", __func__, ioc->name)); 2702 if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *) 2703 ioc->cached_fw, CAN_SLEEP)) < 0) { 2704 printk(MYIOC_s_WARN_FMT 2705 ": firmware downloadboot failure (%d)!\n", 2706 ioc->name, ret); 2707 } 2708 } 2709 2710 /* 2711 * Put the controller into ready state (if its not already) 2712 */ 2713 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY) { 2714 if (!SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, 2715 CAN_SLEEP)) { 2716 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY) 2717 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit " 2718 "reset failed to put ioc in ready state!\n", 2719 ioc->name, __func__); 2720 } else 2721 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit reset " 2722 "failed!\n", ioc->name, __func__); 2723 } 2724 2725 2726 /* Disable adapter interrupts! */ 2727 synchronize_irq(ioc->pcidev->irq); 2728 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); 2729 ioc->active = 0; 2730 2731 /* Clear any lingering interrupt */ 2732 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 2733 CHIPREG_READ32(&ioc->chip->IntStatus); 2734 2735 if (ioc->alloc != NULL) { 2736 sz = ioc->alloc_sz; 2737 dexitprintk(ioc, printk(MYIOC_s_INFO_FMT "free @ %p, sz=%d bytes\n", 2738 ioc->name, ioc->alloc, ioc->alloc_sz)); 2739 pci_free_consistent(ioc->pcidev, sz, 2740 ioc->alloc, ioc->alloc_dma); 2741 ioc->reply_frames = NULL; 2742 ioc->req_frames = NULL; 2743 ioc->alloc = NULL; 2744 ioc->alloc_total -= sz; 2745 } 2746 2747 if (ioc->sense_buf_pool != NULL) { 2748 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC); 2749 pci_free_consistent(ioc->pcidev, sz, 2750 ioc->sense_buf_pool, ioc->sense_buf_pool_dma); 2751 ioc->sense_buf_pool = NULL; 2752 ioc->alloc_total -= sz; 2753 } 2754 2755 if (ioc->events != NULL){ 2756 sz = MPTCTL_EVENT_LOG_SIZE * sizeof(MPT_IOCTL_EVENTS); 2757 kfree(ioc->events); 2758 ioc->events = NULL; 2759 ioc->alloc_total -= sz; 2760 } 2761 2762 mpt_free_fw_memory(ioc); 2763 2764 kfree(ioc->spi_data.nvram); 2765 mpt_inactive_raid_list_free(ioc); 2766 kfree(ioc->raid_data.pIocPg2); 2767 kfree(ioc->raid_data.pIocPg3); 2768 ioc->spi_data.nvram = NULL; 2769 ioc->raid_data.pIocPg3 = NULL; 2770 2771 if (ioc->spi_data.pIocPg4 != NULL) { 2772 sz = ioc->spi_data.IocPg4Sz; 2773 pci_free_consistent(ioc->pcidev, sz, 2774 ioc->spi_data.pIocPg4, 2775 ioc->spi_data.IocPg4_dma); 2776 ioc->spi_data.pIocPg4 = NULL; 2777 ioc->alloc_total -= sz; 2778 } 2779 2780 if (ioc->ReqToChain != NULL) { 2781 kfree(ioc->ReqToChain); 2782 kfree(ioc->RequestNB); 2783 ioc->ReqToChain = NULL; 2784 } 2785 2786 kfree(ioc->ChainToChain); 2787 ioc->ChainToChain = NULL; 2788 2789 if (ioc->HostPageBuffer != NULL) { 2790 if((ret = mpt_host_page_access_control(ioc, 2791 MPI_DB_HPBAC_FREE_BUFFER, NO_SLEEP)) != 0) { 2792 printk(MYIOC_s_ERR_FMT 2793 ": %s: host page buffers free failed (%d)!\n", 2794 ioc->name, __func__, ret); 2795 } 2796 dexitprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2797 "HostPageBuffer free @ %p, sz=%d bytes\n", 2798 ioc->name, ioc->HostPageBuffer, 2799 ioc->HostPageBuffer_sz)); 2800 pci_free_consistent(ioc->pcidev, ioc->HostPageBuffer_sz, 2801 ioc->HostPageBuffer, ioc->HostPageBuffer_dma); 2802 ioc->HostPageBuffer = NULL; 2803 ioc->HostPageBuffer_sz = 0; 2804 ioc->alloc_total -= ioc->HostPageBuffer_sz; 2805 } 2806 2807 pci_set_drvdata(ioc->pcidev, NULL); 2808 } 2809 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2810 /** 2811 * mpt_adapter_dispose - Free all resources associated with an MPT adapter 2812 * @ioc: Pointer to MPT adapter structure 2813 * 2814 * This routine unregisters h/w resources and frees all alloc'd memory 2815 * associated with a MPT adapter structure. 2816 */ 2817 static void 2818 mpt_adapter_dispose(MPT_ADAPTER *ioc) 2819 { 2820 int sz_first, sz_last; 2821 2822 if (ioc == NULL) 2823 return; 2824 2825 sz_first = ioc->alloc_total; 2826 2827 mpt_adapter_disable(ioc); 2828 2829 if (ioc->pci_irq != -1) { 2830 free_irq(ioc->pci_irq, ioc); 2831 if (ioc->msi_enable) 2832 pci_disable_msi(ioc->pcidev); 2833 ioc->pci_irq = -1; 2834 } 2835 2836 if (ioc->memmap != NULL) { 2837 iounmap(ioc->memmap); 2838 ioc->memmap = NULL; 2839 } 2840 2841 pci_disable_device(ioc->pcidev); 2842 pci_release_selected_regions(ioc->pcidev, ioc->bars); 2843 2844 /* Zap the adapter lookup ptr! */ 2845 list_del(&ioc->list); 2846 2847 sz_last = ioc->alloc_total; 2848 dprintk(ioc, printk(MYIOC_s_INFO_FMT "free'd %d of %d bytes\n", 2849 ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first)); 2850 2851 if (ioc->alt_ioc) 2852 ioc->alt_ioc->alt_ioc = NULL; 2853 2854 kfree(ioc); 2855 } 2856 2857 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2858 /** 2859 * MptDisplayIocCapabilities - Disply IOC's capabilities. 2860 * @ioc: Pointer to MPT adapter structure 2861 */ 2862 static void 2863 MptDisplayIocCapabilities(MPT_ADAPTER *ioc) 2864 { 2865 int i = 0; 2866 2867 printk(KERN_INFO "%s: ", ioc->name); 2868 if (ioc->prod_name) 2869 pr_cont("%s: ", ioc->prod_name); 2870 pr_cont("Capabilities={"); 2871 2872 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_INITIATOR) { 2873 pr_cont("Initiator"); 2874 i++; 2875 } 2876 2877 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) { 2878 pr_cont("%sTarget", i ? "," : ""); 2879 i++; 2880 } 2881 2882 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) { 2883 pr_cont("%sLAN", i ? "," : ""); 2884 i++; 2885 } 2886 2887 #if 0 2888 /* 2889 * This would probably evoke more questions than it's worth 2890 */ 2891 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) { 2892 pr_cont("%sLogBusAddr", i ? "," : ""); 2893 i++; 2894 } 2895 #endif 2896 2897 pr_cont("}\n"); 2898 } 2899 2900 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2901 /** 2902 * MakeIocReady - Get IOC to a READY state, using KickStart if needed. 2903 * @ioc: Pointer to MPT_ADAPTER structure 2904 * @force: Force hard KickStart of IOC 2905 * @sleepFlag: Specifies whether the process can sleep 2906 * 2907 * Returns: 2908 * 1 - DIAG reset and READY 2909 * 0 - READY initially OR soft reset and READY 2910 * -1 - Any failure on KickStart 2911 * -2 - Msg Unit Reset Failed 2912 * -3 - IO Unit Reset Failed 2913 * -4 - IOC owned by a PEER 2914 */ 2915 static int 2916 MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag) 2917 { 2918 u32 ioc_state; 2919 int statefault = 0; 2920 int cntdn; 2921 int hard_reset_done = 0; 2922 int r; 2923 int ii; 2924 int whoinit; 2925 2926 /* Get current [raw] IOC state */ 2927 ioc_state = mpt_GetIocState(ioc, 0); 2928 dhsprintk(ioc, printk(MYIOC_s_INFO_FMT "MakeIocReady [raw] state=%08x\n", ioc->name, ioc_state)); 2929 2930 /* 2931 * Check to see if IOC got left/stuck in doorbell handshake 2932 * grip of death. If so, hard reset the IOC. 2933 */ 2934 if (ioc_state & MPI_DOORBELL_ACTIVE) { 2935 statefault = 1; 2936 printk(MYIOC_s_WARN_FMT "Unexpected doorbell active!\n", 2937 ioc->name); 2938 } 2939 2940 /* Is it already READY? */ 2941 if (!statefault && 2942 ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)) { 2943 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT 2944 "IOC is in READY state\n", ioc->name)); 2945 return 0; 2946 } 2947 2948 /* 2949 * Check to see if IOC is in FAULT state. 2950 */ 2951 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) { 2952 statefault = 2; 2953 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state!!!\n", 2954 ioc->name); 2955 printk(MYIOC_s_WARN_FMT " FAULT code = %04xh\n", 2956 ioc->name, ioc_state & MPI_DOORBELL_DATA_MASK); 2957 } 2958 2959 /* 2960 * Hmmm... Did it get left operational? 2961 */ 2962 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_OPERATIONAL) { 2963 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOC operational unexpected\n", 2964 ioc->name)); 2965 2966 /* Check WhoInit. 2967 * If PCI Peer, exit. 2968 * Else, if no fault conditions are present, issue a MessageUnitReset 2969 * Else, fall through to KickStart case 2970 */ 2971 whoinit = (ioc_state & MPI_DOORBELL_WHO_INIT_MASK) >> MPI_DOORBELL_WHO_INIT_SHIFT; 2972 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT 2973 "whoinit 0x%x statefault %d force %d\n", 2974 ioc->name, whoinit, statefault, force)); 2975 if (whoinit == MPI_WHOINIT_PCI_PEER) 2976 return -4; 2977 else { 2978 if ((statefault == 0 ) && (force == 0)) { 2979 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) == 0) 2980 return 0; 2981 } 2982 statefault = 3; 2983 } 2984 } 2985 2986 hard_reset_done = KickStart(ioc, statefault||force, sleepFlag); 2987 if (hard_reset_done < 0) 2988 return -1; 2989 2990 /* 2991 * Loop here waiting for IOC to come READY. 2992 */ 2993 ii = 0; 2994 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 5; /* 5 seconds */ 2995 2996 while ((ioc_state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) { 2997 if (ioc_state == MPI_IOC_STATE_OPERATIONAL) { 2998 /* 2999 * BIOS or previous driver load left IOC in OP state. 3000 * Reset messaging FIFOs. 3001 */ 3002 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) != 0) { 3003 printk(MYIOC_s_ERR_FMT "IOC msg unit reset failed!\n", ioc->name); 3004 return -2; 3005 } 3006 } else if (ioc_state == MPI_IOC_STATE_RESET) { 3007 /* 3008 * Something is wrong. Try to get IOC back 3009 * to a known state. 3010 */ 3011 if ((r = SendIocReset(ioc, MPI_FUNCTION_IO_UNIT_RESET, sleepFlag)) != 0) { 3012 printk(MYIOC_s_ERR_FMT "IO unit reset failed!\n", ioc->name); 3013 return -3; 3014 } 3015 } 3016 3017 ii++; cntdn--; 3018 if (!cntdn) { 3019 printk(MYIOC_s_ERR_FMT 3020 "Wait IOC_READY state (0x%x) timeout(%d)!\n", 3021 ioc->name, ioc_state, (int)((ii+5)/HZ)); 3022 return -ETIME; 3023 } 3024 3025 if (sleepFlag == CAN_SLEEP) { 3026 msleep(1); 3027 } else { 3028 mdelay (1); /* 1 msec delay */ 3029 } 3030 3031 } 3032 3033 if (statefault < 3) { 3034 printk(MYIOC_s_INFO_FMT "Recovered from %s\n", ioc->name, 3035 statefault == 1 ? "stuck handshake" : "IOC FAULT"); 3036 } 3037 3038 return hard_reset_done; 3039 } 3040 3041 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3042 /** 3043 * mpt_GetIocState - Get the current state of a MPT adapter. 3044 * @ioc: Pointer to MPT_ADAPTER structure 3045 * @cooked: Request raw or cooked IOC state 3046 * 3047 * Returns all IOC Doorbell register bits if cooked==0, else just the 3048 * Doorbell bits in MPI_IOC_STATE_MASK. 3049 */ 3050 u32 3051 mpt_GetIocState(MPT_ADAPTER *ioc, int cooked) 3052 { 3053 u32 s, sc; 3054 3055 /* Get! */ 3056 s = CHIPREG_READ32(&ioc->chip->Doorbell); 3057 sc = s & MPI_IOC_STATE_MASK; 3058 3059 /* Save! */ 3060 ioc->last_state = sc; 3061 3062 return cooked ? sc : s; 3063 } 3064 3065 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3066 /** 3067 * GetIocFacts - Send IOCFacts request to MPT adapter. 3068 * @ioc: Pointer to MPT_ADAPTER structure 3069 * @sleepFlag: Specifies whether the process can sleep 3070 * @reason: If recovery, only update facts. 3071 * 3072 * Returns 0 for success, non-zero for failure. 3073 */ 3074 static int 3075 GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason) 3076 { 3077 IOCFacts_t get_facts; 3078 IOCFactsReply_t *facts; 3079 int r; 3080 int req_sz; 3081 int reply_sz; 3082 int sz; 3083 u32 status, vv; 3084 u8 shiftFactor=1; 3085 3086 /* IOC *must* NOT be in RESET state! */ 3087 if (ioc->last_state == MPI_IOC_STATE_RESET) { 3088 printk(KERN_ERR MYNAM 3089 ": ERROR - Can't get IOCFacts, %s NOT READY! (%08x)\n", 3090 ioc->name, ioc->last_state); 3091 return -44; 3092 } 3093 3094 facts = &ioc->facts; 3095 3096 /* Destination (reply area)... */ 3097 reply_sz = sizeof(*facts); 3098 memset(facts, 0, reply_sz); 3099 3100 /* Request area (get_facts on the stack right now!) */ 3101 req_sz = sizeof(get_facts); 3102 memset(&get_facts, 0, req_sz); 3103 3104 get_facts.Function = MPI_FUNCTION_IOC_FACTS; 3105 /* Assert: All other get_facts fields are zero! */ 3106 3107 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3108 "Sending get IocFacts request req_sz=%d reply_sz=%d\n", 3109 ioc->name, req_sz, reply_sz)); 3110 3111 /* No non-zero fields in the get_facts request are greater than 3112 * 1 byte in size, so we can just fire it off as is. 3113 */ 3114 r = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_facts, 3115 reply_sz, (u16*)facts, 5 /*seconds*/, sleepFlag); 3116 if (r != 0) 3117 return r; 3118 3119 /* 3120 * Now byte swap (GRRR) the necessary fields before any further 3121 * inspection of reply contents. 3122 * 3123 * But need to do some sanity checks on MsgLength (byte) field 3124 * to make sure we don't zero IOC's req_sz! 3125 */ 3126 /* Did we get a valid reply? */ 3127 if (facts->MsgLength > offsetof(IOCFactsReply_t, RequestFrameSize)/sizeof(u32)) { 3128 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) { 3129 /* 3130 * If not been here, done that, save off first WhoInit value 3131 */ 3132 if (ioc->FirstWhoInit == WHOINIT_UNKNOWN) 3133 ioc->FirstWhoInit = facts->WhoInit; 3134 } 3135 3136 facts->MsgVersion = le16_to_cpu(facts->MsgVersion); 3137 facts->MsgContext = le32_to_cpu(facts->MsgContext); 3138 facts->IOCExceptions = le16_to_cpu(facts->IOCExceptions); 3139 facts->IOCStatus = le16_to_cpu(facts->IOCStatus); 3140 facts->IOCLogInfo = le32_to_cpu(facts->IOCLogInfo); 3141 status = le16_to_cpu(facts->IOCStatus) & MPI_IOCSTATUS_MASK; 3142 /* CHECKME! IOCStatus, IOCLogInfo */ 3143 3144 facts->ReplyQueueDepth = le16_to_cpu(facts->ReplyQueueDepth); 3145 facts->RequestFrameSize = le16_to_cpu(facts->RequestFrameSize); 3146 3147 /* 3148 * FC f/w version changed between 1.1 and 1.2 3149 * Old: u16{Major(4),Minor(4),SubMinor(8)} 3150 * New: u32{Major(8),Minor(8),Unit(8),Dev(8)} 3151 */ 3152 if (facts->MsgVersion < MPI_VERSION_01_02) { 3153 /* 3154 * Handle old FC f/w style, convert to new... 3155 */ 3156 u16 oldv = le16_to_cpu(facts->Reserved_0101_FWVersion); 3157 facts->FWVersion.Word = 3158 ((oldv<<12) & 0xFF000000) | 3159 ((oldv<<8) & 0x000FFF00); 3160 } else 3161 facts->FWVersion.Word = le32_to_cpu(facts->FWVersion.Word); 3162 3163 facts->ProductID = le16_to_cpu(facts->ProductID); 3164 3165 if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK) 3166 > MPI_FW_HEADER_PID_PROD_TARGET_SCSI) 3167 ioc->ir_firmware = 1; 3168 3169 facts->CurrentHostMfaHighAddr = 3170 le32_to_cpu(facts->CurrentHostMfaHighAddr); 3171 facts->GlobalCredits = le16_to_cpu(facts->GlobalCredits); 3172 facts->CurrentSenseBufferHighAddr = 3173 le32_to_cpu(facts->CurrentSenseBufferHighAddr); 3174 facts->CurReplyFrameSize = 3175 le16_to_cpu(facts->CurReplyFrameSize); 3176 facts->IOCCapabilities = le32_to_cpu(facts->IOCCapabilities); 3177 3178 /* 3179 * Handle NEW (!) IOCFactsReply fields in MPI-1.01.xx 3180 * Older MPI-1.00.xx struct had 13 dwords, and enlarged 3181 * to 14 in MPI-1.01.0x. 3182 */ 3183 if (facts->MsgLength >= (offsetof(IOCFactsReply_t,FWImageSize) + 7)/4 && 3184 facts->MsgVersion > MPI_VERSION_01_00) { 3185 facts->FWImageSize = le32_to_cpu(facts->FWImageSize); 3186 } 3187 3188 facts->FWImageSize = ALIGN(facts->FWImageSize, 4); 3189 3190 if (!facts->RequestFrameSize) { 3191 /* Something is wrong! */ 3192 printk(MYIOC_s_ERR_FMT "IOC reported invalid 0 request size!\n", 3193 ioc->name); 3194 return -55; 3195 } 3196 3197 r = sz = facts->BlockSize; 3198 vv = ((63 / (sz * 4)) + 1) & 0x03; 3199 ioc->NB_for_64_byte_frame = vv; 3200 while ( sz ) 3201 { 3202 shiftFactor++; 3203 sz = sz >> 1; 3204 } 3205 ioc->NBShiftFactor = shiftFactor; 3206 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3207 "NB_for_64_byte_frame=%x NBShiftFactor=%x BlockSize=%x\n", 3208 ioc->name, vv, shiftFactor, r)); 3209 3210 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) { 3211 /* 3212 * Set values for this IOC's request & reply frame sizes, 3213 * and request & reply queue depths... 3214 */ 3215 ioc->req_sz = min(MPT_DEFAULT_FRAME_SIZE, facts->RequestFrameSize * 4); 3216 ioc->req_depth = min_t(int, MPT_MAX_REQ_DEPTH, facts->GlobalCredits); 3217 ioc->reply_sz = MPT_REPLY_FRAME_SIZE; 3218 ioc->reply_depth = min_t(int, MPT_DEFAULT_REPLY_DEPTH, facts->ReplyQueueDepth); 3219 3220 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "reply_sz=%3d, reply_depth=%4d\n", 3221 ioc->name, ioc->reply_sz, ioc->reply_depth)); 3222 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "req_sz =%3d, req_depth =%4d\n", 3223 ioc->name, ioc->req_sz, ioc->req_depth)); 3224 3225 /* Get port facts! */ 3226 if ( (r = GetPortFacts(ioc, 0, sleepFlag)) != 0 ) 3227 return r; 3228 } 3229 } else { 3230 printk(MYIOC_s_ERR_FMT 3231 "Invalid IOC facts reply, msgLength=%d offsetof=%zd!\n", 3232 ioc->name, facts->MsgLength, (offsetof(IOCFactsReply_t, 3233 RequestFrameSize)/sizeof(u32))); 3234 return -66; 3235 } 3236 3237 return 0; 3238 } 3239 3240 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3241 /** 3242 * GetPortFacts - Send PortFacts request to MPT adapter. 3243 * @ioc: Pointer to MPT_ADAPTER structure 3244 * @portnum: Port number 3245 * @sleepFlag: Specifies whether the process can sleep 3246 * 3247 * Returns 0 for success, non-zero for failure. 3248 */ 3249 static int 3250 GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag) 3251 { 3252 PortFacts_t get_pfacts; 3253 PortFactsReply_t *pfacts; 3254 int ii; 3255 int req_sz; 3256 int reply_sz; 3257 int max_id; 3258 3259 /* IOC *must* NOT be in RESET state! */ 3260 if (ioc->last_state == MPI_IOC_STATE_RESET) { 3261 printk(MYIOC_s_ERR_FMT "Can't get PortFacts NOT READY! (%08x)\n", 3262 ioc->name, ioc->last_state ); 3263 return -4; 3264 } 3265 3266 pfacts = &ioc->pfacts[portnum]; 3267 3268 /* Destination (reply area)... */ 3269 reply_sz = sizeof(*pfacts); 3270 memset(pfacts, 0, reply_sz); 3271 3272 /* Request area (get_pfacts on the stack right now!) */ 3273 req_sz = sizeof(get_pfacts); 3274 memset(&get_pfacts, 0, req_sz); 3275 3276 get_pfacts.Function = MPI_FUNCTION_PORT_FACTS; 3277 get_pfacts.PortNumber = portnum; 3278 /* Assert: All other get_pfacts fields are zero! */ 3279 3280 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending get PortFacts(%d) request\n", 3281 ioc->name, portnum)); 3282 3283 /* No non-zero fields in the get_pfacts request are greater than 3284 * 1 byte in size, so we can just fire it off as is. 3285 */ 3286 ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_pfacts, 3287 reply_sz, (u16*)pfacts, 5 /*seconds*/, sleepFlag); 3288 if (ii != 0) 3289 return ii; 3290 3291 /* Did we get a valid reply? */ 3292 3293 /* Now byte swap the necessary fields in the response. */ 3294 pfacts->MsgContext = le32_to_cpu(pfacts->MsgContext); 3295 pfacts->IOCStatus = le16_to_cpu(pfacts->IOCStatus); 3296 pfacts->IOCLogInfo = le32_to_cpu(pfacts->IOCLogInfo); 3297 pfacts->MaxDevices = le16_to_cpu(pfacts->MaxDevices); 3298 pfacts->PortSCSIID = le16_to_cpu(pfacts->PortSCSIID); 3299 pfacts->ProtocolFlags = le16_to_cpu(pfacts->ProtocolFlags); 3300 pfacts->MaxPostedCmdBuffers = le16_to_cpu(pfacts->MaxPostedCmdBuffers); 3301 pfacts->MaxPersistentIDs = le16_to_cpu(pfacts->MaxPersistentIDs); 3302 pfacts->MaxLanBuckets = le16_to_cpu(pfacts->MaxLanBuckets); 3303 3304 max_id = (ioc->bus_type == SAS) ? pfacts->PortSCSIID : 3305 pfacts->MaxDevices; 3306 ioc->devices_per_bus = (max_id > 255) ? 256 : max_id; 3307 ioc->number_of_buses = (ioc->devices_per_bus < 256) ? 1 : max_id/256; 3308 3309 /* 3310 * Place all the devices on channels 3311 * 3312 * (for debuging) 3313 */ 3314 if (mpt_channel_mapping) { 3315 ioc->devices_per_bus = 1; 3316 ioc->number_of_buses = (max_id > 255) ? 255 : max_id; 3317 } 3318 3319 return 0; 3320 } 3321 3322 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3323 /** 3324 * SendIocInit - Send IOCInit request to MPT adapter. 3325 * @ioc: Pointer to MPT_ADAPTER structure 3326 * @sleepFlag: Specifies whether the process can sleep 3327 * 3328 * Send IOCInit followed by PortEnable to bring IOC to OPERATIONAL state. 3329 * 3330 * Returns 0 for success, non-zero for failure. 3331 */ 3332 static int 3333 SendIocInit(MPT_ADAPTER *ioc, int sleepFlag) 3334 { 3335 IOCInit_t ioc_init; 3336 MPIDefaultReply_t init_reply; 3337 u32 state; 3338 int r; 3339 int count; 3340 int cntdn; 3341 3342 memset(&ioc_init, 0, sizeof(ioc_init)); 3343 memset(&init_reply, 0, sizeof(init_reply)); 3344 3345 ioc_init.WhoInit = MPI_WHOINIT_HOST_DRIVER; 3346 ioc_init.Function = MPI_FUNCTION_IOC_INIT; 3347 3348 /* If we are in a recovery mode and we uploaded the FW image, 3349 * then this pointer is not NULL. Skip the upload a second time. 3350 * Set this flag if cached_fw set for either IOC. 3351 */ 3352 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT) 3353 ioc->upload_fw = 1; 3354 else 3355 ioc->upload_fw = 0; 3356 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "upload_fw %d facts.Flags=%x\n", 3357 ioc->name, ioc->upload_fw, ioc->facts.Flags)); 3358 3359 ioc_init.MaxDevices = (U8)ioc->devices_per_bus; 3360 ioc_init.MaxBuses = (U8)ioc->number_of_buses; 3361 3362 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "facts.MsgVersion=%x\n", 3363 ioc->name, ioc->facts.MsgVersion)); 3364 if (ioc->facts.MsgVersion >= MPI_VERSION_01_05) { 3365 // set MsgVersion and HeaderVersion host driver was built with 3366 ioc_init.MsgVersion = cpu_to_le16(MPI_VERSION); 3367 ioc_init.HeaderVersion = cpu_to_le16(MPI_HEADER_VERSION); 3368 3369 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_HOST_PAGE_BUFFER_PERSISTENT) { 3370 ioc_init.HostPageBufferSGE = ioc->facts.HostPageBufferSGE; 3371 } else if(mpt_host_page_alloc(ioc, &ioc_init)) 3372 return -99; 3373 } 3374 ioc_init.ReplyFrameSize = cpu_to_le16(ioc->reply_sz); /* in BYTES */ 3375 3376 if (ioc->sg_addr_size == sizeof(u64)) { 3377 /* Save the upper 32-bits of the request 3378 * (reply) and sense buffers. 3379 */ 3380 ioc_init.HostMfaHighAddr = cpu_to_le32((u32)((u64)ioc->alloc_dma >> 32)); 3381 ioc_init.SenseBufferHighAddr = cpu_to_le32((u32)((u64)ioc->sense_buf_pool_dma >> 32)); 3382 } else { 3383 /* Force 32-bit addressing */ 3384 ioc_init.HostMfaHighAddr = cpu_to_le32(0); 3385 ioc_init.SenseBufferHighAddr = cpu_to_le32(0); 3386 } 3387 3388 ioc->facts.CurrentHostMfaHighAddr = ioc_init.HostMfaHighAddr; 3389 ioc->facts.CurrentSenseBufferHighAddr = ioc_init.SenseBufferHighAddr; 3390 ioc->facts.MaxDevices = ioc_init.MaxDevices; 3391 ioc->facts.MaxBuses = ioc_init.MaxBuses; 3392 3393 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOCInit (req @ %p)\n", 3394 ioc->name, &ioc_init)); 3395 3396 r = mpt_handshake_req_reply_wait(ioc, sizeof(IOCInit_t), (u32*)&ioc_init, 3397 sizeof(MPIDefaultReply_t), (u16*)&init_reply, 10 /*seconds*/, sleepFlag); 3398 if (r != 0) { 3399 printk(MYIOC_s_ERR_FMT "Sending IOCInit failed(%d)!\n",ioc->name, r); 3400 return r; 3401 } 3402 3403 /* No need to byte swap the multibyte fields in the reply 3404 * since we don't even look at its contents. 3405 */ 3406 3407 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending PortEnable (req @ %p)\n", 3408 ioc->name, &ioc_init)); 3409 3410 if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0) { 3411 printk(MYIOC_s_ERR_FMT "Sending PortEnable failed(%d)!\n",ioc->name, r); 3412 return r; 3413 } 3414 3415 /* YIKES! SUPER IMPORTANT!!! 3416 * Poll IocState until _OPERATIONAL while IOC is doing 3417 * LoopInit and TargetDiscovery! 3418 */ 3419 count = 0; 3420 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 60; /* 60 seconds */ 3421 state = mpt_GetIocState(ioc, 1); 3422 while (state != MPI_IOC_STATE_OPERATIONAL && --cntdn) { 3423 if (sleepFlag == CAN_SLEEP) { 3424 msleep(1); 3425 } else { 3426 mdelay(1); 3427 } 3428 3429 if (!cntdn) { 3430 printk(MYIOC_s_ERR_FMT "Wait IOC_OP state timeout(%d)!\n", 3431 ioc->name, (int)((count+5)/HZ)); 3432 return -9; 3433 } 3434 3435 state = mpt_GetIocState(ioc, 1); 3436 count++; 3437 } 3438 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wait IOC_OPERATIONAL state (cnt=%d)\n", 3439 ioc->name, count)); 3440 3441 ioc->aen_event_read_flag=0; 3442 return r; 3443 } 3444 3445 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3446 /** 3447 * SendPortEnable - Send PortEnable request to MPT adapter port. 3448 * @ioc: Pointer to MPT_ADAPTER structure 3449 * @portnum: Port number to enable 3450 * @sleepFlag: Specifies whether the process can sleep 3451 * 3452 * Send PortEnable to bring IOC to OPERATIONAL state. 3453 * 3454 * Returns 0 for success, non-zero for failure. 3455 */ 3456 static int 3457 SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag) 3458 { 3459 PortEnable_t port_enable; 3460 MPIDefaultReply_t reply_buf; 3461 int rc; 3462 int req_sz; 3463 int reply_sz; 3464 3465 /* Destination... */ 3466 reply_sz = sizeof(MPIDefaultReply_t); 3467 memset(&reply_buf, 0, reply_sz); 3468 3469 req_sz = sizeof(PortEnable_t); 3470 memset(&port_enable, 0, req_sz); 3471 3472 port_enable.Function = MPI_FUNCTION_PORT_ENABLE; 3473 port_enable.PortNumber = portnum; 3474 /* port_enable.ChainOffset = 0; */ 3475 /* port_enable.MsgFlags = 0; */ 3476 /* port_enable.MsgContext = 0; */ 3477 3478 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Port(%d)Enable (req @ %p)\n", 3479 ioc->name, portnum, &port_enable)); 3480 3481 /* RAID FW may take a long time to enable 3482 */ 3483 if (ioc->ir_firmware || ioc->bus_type == SAS) { 3484 rc = mpt_handshake_req_reply_wait(ioc, req_sz, 3485 (u32*)&port_enable, reply_sz, (u16*)&reply_buf, 3486 300 /*seconds*/, sleepFlag); 3487 } else { 3488 rc = mpt_handshake_req_reply_wait(ioc, req_sz, 3489 (u32*)&port_enable, reply_sz, (u16*)&reply_buf, 3490 30 /*seconds*/, sleepFlag); 3491 } 3492 return rc; 3493 } 3494 3495 /** 3496 * mpt_alloc_fw_memory - allocate firmware memory 3497 * @ioc: Pointer to MPT_ADAPTER structure 3498 * @size: total FW bytes 3499 * 3500 * If memory has already been allocated, the same (cached) value 3501 * is returned. 3502 * 3503 * Return 0 if successful, or non-zero for failure 3504 **/ 3505 int 3506 mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size) 3507 { 3508 int rc; 3509 3510 if (ioc->cached_fw) { 3511 rc = 0; /* use already allocated memory */ 3512 goto out; 3513 } 3514 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) { 3515 ioc->cached_fw = ioc->alt_ioc->cached_fw; /* use alt_ioc's memory */ 3516 ioc->cached_fw_dma = ioc->alt_ioc->cached_fw_dma; 3517 rc = 0; 3518 goto out; 3519 } 3520 ioc->cached_fw = pci_alloc_consistent(ioc->pcidev, size, &ioc->cached_fw_dma); 3521 if (!ioc->cached_fw) { 3522 printk(MYIOC_s_ERR_FMT "Unable to allocate memory for the cached firmware image!\n", 3523 ioc->name); 3524 rc = -1; 3525 } else { 3526 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Image @ %p[%p], sz=%d[%x] bytes\n", 3527 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, size, size)); 3528 ioc->alloc_total += size; 3529 rc = 0; 3530 } 3531 out: 3532 return rc; 3533 } 3534 3535 /** 3536 * mpt_free_fw_memory - free firmware memory 3537 * @ioc: Pointer to MPT_ADAPTER structure 3538 * 3539 * If alt_img is NULL, delete from ioc structure. 3540 * Else, delete a secondary image in same format. 3541 **/ 3542 void 3543 mpt_free_fw_memory(MPT_ADAPTER *ioc) 3544 { 3545 int sz; 3546 3547 if (!ioc->cached_fw) 3548 return; 3549 3550 sz = ioc->facts.FWImageSize; 3551 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n", 3552 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz)); 3553 pci_free_consistent(ioc->pcidev, sz, ioc->cached_fw, ioc->cached_fw_dma); 3554 ioc->alloc_total -= sz; 3555 ioc->cached_fw = NULL; 3556 } 3557 3558 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3559 /** 3560 * mpt_do_upload - Construct and Send FWUpload request to MPT adapter port. 3561 * @ioc: Pointer to MPT_ADAPTER structure 3562 * @sleepFlag: Specifies whether the process can sleep 3563 * 3564 * Returns 0 for success, >0 for handshake failure 3565 * <0 for fw upload failure. 3566 * 3567 * Remark: If bound IOC and a successful FWUpload was performed 3568 * on the bound IOC, the second image is discarded 3569 * and memory is free'd. Both channels must upload to prevent 3570 * IOC from running in degraded mode. 3571 */ 3572 static int 3573 mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag) 3574 { 3575 u8 reply[sizeof(FWUploadReply_t)]; 3576 FWUpload_t *prequest; 3577 FWUploadReply_t *preply; 3578 FWUploadTCSGE_t *ptcsge; 3579 u32 flagsLength; 3580 int ii, sz, reply_sz; 3581 int cmdStatus; 3582 int request_size; 3583 /* If the image size is 0, we are done. 3584 */ 3585 if ((sz = ioc->facts.FWImageSize) == 0) 3586 return 0; 3587 3588 if (mpt_alloc_fw_memory(ioc, ioc->facts.FWImageSize) != 0) 3589 return -ENOMEM; 3590 3591 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": FW Image @ %p[%p], sz=%d[%x] bytes\n", 3592 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz)); 3593 3594 prequest = (sleepFlag == NO_SLEEP) ? kzalloc(ioc->req_sz, GFP_ATOMIC) : 3595 kzalloc(ioc->req_sz, GFP_KERNEL); 3596 if (!prequest) { 3597 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed " 3598 "while allocating memory \n", ioc->name)); 3599 mpt_free_fw_memory(ioc); 3600 return -ENOMEM; 3601 } 3602 3603 preply = (FWUploadReply_t *)&reply; 3604 3605 reply_sz = sizeof(reply); 3606 memset(preply, 0, reply_sz); 3607 3608 prequest->ImageType = MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM; 3609 prequest->Function = MPI_FUNCTION_FW_UPLOAD; 3610 3611 ptcsge = (FWUploadTCSGE_t *) &prequest->SGL; 3612 ptcsge->DetailsLength = 12; 3613 ptcsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT; 3614 ptcsge->ImageSize = cpu_to_le32(sz); 3615 ptcsge++; 3616 3617 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | sz; 3618 ioc->add_sge((char *)ptcsge, flagsLength, ioc->cached_fw_dma); 3619 request_size = offsetof(FWUpload_t, SGL) + sizeof(FWUploadTCSGE_t) + 3620 ioc->SGE_size; 3621 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending FW Upload " 3622 " (req @ %p) fw_size=%d mf_request_size=%d\n", ioc->name, prequest, 3623 ioc->facts.FWImageSize, request_size)); 3624 DBG_DUMP_FW_REQUEST_FRAME(ioc, (u32 *)prequest); 3625 3626 ii = mpt_handshake_req_reply_wait(ioc, request_size, (u32 *)prequest, 3627 reply_sz, (u16 *)preply, 65 /*seconds*/, sleepFlag); 3628 3629 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Upload completed " 3630 "rc=%x \n", ioc->name, ii)); 3631 3632 cmdStatus = -EFAULT; 3633 if (ii == 0) { 3634 /* Handshake transfer was complete and successful. 3635 * Check the Reply Frame. 3636 */ 3637 int status; 3638 status = le16_to_cpu(preply->IOCStatus) & 3639 MPI_IOCSTATUS_MASK; 3640 if (status == MPI_IOCSTATUS_SUCCESS && 3641 ioc->facts.FWImageSize == 3642 le32_to_cpu(preply->ActualImageSize)) 3643 cmdStatus = 0; 3644 } 3645 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": do_upload cmdStatus=%d \n", 3646 ioc->name, cmdStatus)); 3647 3648 3649 if (cmdStatus) { 3650 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed, " 3651 "freeing image \n", ioc->name)); 3652 mpt_free_fw_memory(ioc); 3653 } 3654 kfree(prequest); 3655 3656 return cmdStatus; 3657 } 3658 3659 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3660 /** 3661 * mpt_downloadboot - DownloadBoot code 3662 * @ioc: Pointer to MPT_ADAPTER structure 3663 * @pFwHeader: Pointer to firmware header info 3664 * @sleepFlag: Specifies whether the process can sleep 3665 * 3666 * FwDownloadBoot requires Programmed IO access. 3667 * 3668 * Returns 0 for success 3669 * -1 FW Image size is 0 3670 * -2 No valid cached_fw Pointer 3671 * <0 for fw upload failure. 3672 */ 3673 static int 3674 mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag) 3675 { 3676 MpiExtImageHeader_t *pExtImage; 3677 u32 fwSize; 3678 u32 diag0val; 3679 int count; 3680 u32 *ptrFw; 3681 u32 diagRwData; 3682 u32 nextImage; 3683 u32 load_addr; 3684 u32 ioc_state=0; 3685 3686 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot: fw size 0x%x (%d), FW Ptr %p\n", 3687 ioc->name, pFwHeader->ImageSize, pFwHeader->ImageSize, pFwHeader)); 3688 3689 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); 3690 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE); 3691 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE); 3692 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE); 3693 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE); 3694 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE); 3695 3696 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM)); 3697 3698 /* wait 1 msec */ 3699 if (sleepFlag == CAN_SLEEP) { 3700 msleep(1); 3701 } else { 3702 mdelay (1); 3703 } 3704 3705 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 3706 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER); 3707 3708 for (count = 0; count < 30; count ++) { 3709 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 3710 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) { 3711 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RESET_ADAPTER cleared, count=%d\n", 3712 ioc->name, count)); 3713 break; 3714 } 3715 /* wait .1 sec */ 3716 if (sleepFlag == CAN_SLEEP) { 3717 msleep (100); 3718 } else { 3719 mdelay (100); 3720 } 3721 } 3722 3723 if ( count == 30 ) { 3724 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot failed! " 3725 "Unable to get MPI_DIAG_DRWE mode, diag0val=%x\n", 3726 ioc->name, diag0val)); 3727 return -3; 3728 } 3729 3730 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); 3731 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE); 3732 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE); 3733 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE); 3734 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE); 3735 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE); 3736 3737 /* Set the DiagRwEn and Disable ARM bits */ 3738 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_RW_ENABLE | MPI_DIAG_DISABLE_ARM)); 3739 3740 fwSize = (pFwHeader->ImageSize + 3)/4; 3741 ptrFw = (u32 *) pFwHeader; 3742 3743 /* Write the LoadStartAddress to the DiagRw Address Register 3744 * using Programmed IO 3745 */ 3746 if (ioc->errata_flag_1064) 3747 pci_enable_io_access(ioc->pcidev); 3748 3749 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->LoadStartAddress); 3750 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "LoadStart addr written 0x%x \n", 3751 ioc->name, pFwHeader->LoadStartAddress)); 3752 3753 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write FW Image: 0x%x bytes @ %p\n", 3754 ioc->name, fwSize*4, ptrFw)); 3755 while (fwSize--) { 3756 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++); 3757 } 3758 3759 nextImage = pFwHeader->NextImageHeaderOffset; 3760 while (nextImage) { 3761 pExtImage = (MpiExtImageHeader_t *) ((char *)pFwHeader + nextImage); 3762 3763 load_addr = pExtImage->LoadStartAddress; 3764 3765 fwSize = (pExtImage->ImageSize + 3) >> 2; 3766 ptrFw = (u32 *)pExtImage; 3767 3768 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write Ext Image: 0x%x (%d) bytes @ %p load_addr=%x\n", 3769 ioc->name, fwSize*4, fwSize*4, ptrFw, load_addr)); 3770 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, load_addr); 3771 3772 while (fwSize--) { 3773 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++); 3774 } 3775 nextImage = pExtImage->NextImageHeaderOffset; 3776 } 3777 3778 /* Write the IopResetVectorRegAddr */ 3779 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Addr=%x! \n", ioc->name, pFwHeader->IopResetRegAddr)); 3780 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->IopResetRegAddr); 3781 3782 /* Write the IopResetVectorValue */ 3783 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Value=%x! \n", ioc->name, pFwHeader->IopResetVectorValue)); 3784 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, pFwHeader->IopResetVectorValue); 3785 3786 /* Clear the internal flash bad bit - autoincrementing register, 3787 * so must do two writes. 3788 */ 3789 if (ioc->bus_type == SPI) { 3790 /* 3791 * 1030 and 1035 H/W errata, workaround to access 3792 * the ClearFlashBadSignatureBit 3793 */ 3794 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000); 3795 diagRwData = CHIPREG_PIO_READ32(&ioc->pio_chip->DiagRwData); 3796 diagRwData |= 0x40000000; 3797 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000); 3798 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, diagRwData); 3799 3800 } else /* if((ioc->bus_type == SAS) || (ioc->bus_type == FC)) */ { 3801 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 3802 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | 3803 MPI_DIAG_CLEAR_FLASH_BAD_SIG); 3804 3805 /* wait 1 msec */ 3806 if (sleepFlag == CAN_SLEEP) { 3807 msleep (1); 3808 } else { 3809 mdelay (1); 3810 } 3811 } 3812 3813 if (ioc->errata_flag_1064) 3814 pci_disable_io_access(ioc->pcidev); 3815 3816 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 3817 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot diag0val=%x, " 3818 "turning off PREVENT_IOC_BOOT, DISABLE_ARM, RW_ENABLE\n", 3819 ioc->name, diag0val)); 3820 diag0val &= ~(MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM | MPI_DIAG_RW_ENABLE); 3821 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot now diag0val=%x\n", 3822 ioc->name, diag0val)); 3823 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val); 3824 3825 /* Write 0xFF to reset the sequencer */ 3826 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); 3827 3828 if (ioc->bus_type == SAS) { 3829 ioc_state = mpt_GetIocState(ioc, 0); 3830 if ( (GetIocFacts(ioc, sleepFlag, 3831 MPT_HOSTEVENT_IOC_BRINGUP)) != 0 ) { 3832 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "GetIocFacts failed: IocState=%x\n", 3833 ioc->name, ioc_state)); 3834 return -EFAULT; 3835 } 3836 } 3837 3838 for (count=0; count<HZ*20; count++) { 3839 if ((ioc_state = mpt_GetIocState(ioc, 0)) & MPI_IOC_STATE_READY) { 3840 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3841 "downloadboot successful! (count=%d) IocState=%x\n", 3842 ioc->name, count, ioc_state)); 3843 if (ioc->bus_type == SAS) { 3844 return 0; 3845 } 3846 if ((SendIocInit(ioc, sleepFlag)) != 0) { 3847 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3848 "downloadboot: SendIocInit failed\n", 3849 ioc->name)); 3850 return -EFAULT; 3851 } 3852 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3853 "downloadboot: SendIocInit successful\n", 3854 ioc->name)); 3855 return 0; 3856 } 3857 if (sleepFlag == CAN_SLEEP) { 3858 msleep (10); 3859 } else { 3860 mdelay (10); 3861 } 3862 } 3863 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3864 "downloadboot failed! IocState=%x\n",ioc->name, ioc_state)); 3865 return -EFAULT; 3866 } 3867 3868 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3869 /** 3870 * KickStart - Perform hard reset of MPT adapter. 3871 * @ioc: Pointer to MPT_ADAPTER structure 3872 * @force: Force hard reset 3873 * @sleepFlag: Specifies whether the process can sleep 3874 * 3875 * This routine places MPT adapter in diagnostic mode via the 3876 * WriteSequence register, and then performs a hard reset of adapter 3877 * via the Diagnostic register. 3878 * 3879 * Inputs: sleepflag - CAN_SLEEP (non-interrupt thread) 3880 * or NO_SLEEP (interrupt thread, use mdelay) 3881 * force - 1 if doorbell active, board fault state 3882 * board operational, IOC_RECOVERY or 3883 * IOC_BRINGUP and there is an alt_ioc. 3884 * 0 else 3885 * 3886 * Returns: 3887 * 1 - hard reset, READY 3888 * 0 - no reset due to History bit, READY 3889 * -1 - no reset due to History bit but not READY 3890 * OR reset but failed to come READY 3891 * -2 - no reset, could not enter DIAG mode 3892 * -3 - reset but bad FW bit 3893 */ 3894 static int 3895 KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag) 3896 { 3897 int hard_reset_done = 0; 3898 u32 ioc_state=0; 3899 int cnt,cntdn; 3900 3901 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStarting!\n", ioc->name)); 3902 if (ioc->bus_type == SPI) { 3903 /* Always issue a Msg Unit Reset first. This will clear some 3904 * SCSI bus hang conditions. 3905 */ 3906 SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag); 3907 3908 if (sleepFlag == CAN_SLEEP) { 3909 msleep (1000); 3910 } else { 3911 mdelay (1000); 3912 } 3913 } 3914 3915 hard_reset_done = mpt_diag_reset(ioc, force, sleepFlag); 3916 if (hard_reset_done < 0) 3917 return hard_reset_done; 3918 3919 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset successful!\n", 3920 ioc->name)); 3921 3922 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 2; /* 2 seconds */ 3923 for (cnt=0; cnt<cntdn; cnt++) { 3924 ioc_state = mpt_GetIocState(ioc, 1); 3925 if ((ioc_state == MPI_IOC_STATE_READY) || (ioc_state == MPI_IOC_STATE_OPERATIONAL)) { 3926 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStart successful! (cnt=%d)\n", 3927 ioc->name, cnt)); 3928 return hard_reset_done; 3929 } 3930 if (sleepFlag == CAN_SLEEP) { 3931 msleep (10); 3932 } else { 3933 mdelay (10); 3934 } 3935 } 3936 3937 dinitprintk(ioc, printk(MYIOC_s_ERR_FMT "Failed to come READY after reset! IocState=%x\n", 3938 ioc->name, mpt_GetIocState(ioc, 0))); 3939 return -1; 3940 } 3941 3942 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3943 /** 3944 * mpt_diag_reset - Perform hard reset of the adapter. 3945 * @ioc: Pointer to MPT_ADAPTER structure 3946 * @ignore: Set if to honor and clear to ignore 3947 * the reset history bit 3948 * @sleepFlag: CAN_SLEEP if called in a non-interrupt thread, 3949 * else set to NO_SLEEP (use mdelay instead) 3950 * 3951 * This routine places the adapter in diagnostic mode via the 3952 * WriteSequence register and then performs a hard reset of adapter 3953 * via the Diagnostic register. Adapter should be in ready state 3954 * upon successful completion. 3955 * 3956 * Returns: 1 hard reset successful 3957 * 0 no reset performed because reset history bit set 3958 * -2 enabling diagnostic mode failed 3959 * -3 diagnostic reset failed 3960 */ 3961 static int 3962 mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag) 3963 { 3964 u32 diag0val; 3965 u32 doorbell; 3966 int hard_reset_done = 0; 3967 int count = 0; 3968 u32 diag1val = 0; 3969 MpiFwHeader_t *cached_fw; /* Pointer to FW */ 3970 u8 cb_idx; 3971 3972 /* Clear any existing interrupts */ 3973 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 3974 3975 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) { 3976 3977 if (!ignore) 3978 return 0; 3979 3980 drsprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset " 3981 "address=%p\n", ioc->name, __func__, 3982 &ioc->chip->Doorbell, &ioc->chip->Reset_1078)); 3983 CHIPREG_WRITE32(&ioc->chip->Reset_1078, 0x07); 3984 if (sleepFlag == CAN_SLEEP) 3985 msleep(1); 3986 else 3987 mdelay(1); 3988 3989 /* 3990 * Call each currently registered protocol IOC reset handler 3991 * with pre-reset indication. 3992 * NOTE: If we're doing _IOC_BRINGUP, there can be no 3993 * MptResetHandlers[] registered yet. 3994 */ 3995 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 3996 if (MptResetHandlers[cb_idx]) 3997 (*(MptResetHandlers[cb_idx]))(ioc, 3998 MPT_IOC_PRE_RESET); 3999 } 4000 4001 for (count = 0; count < 60; count ++) { 4002 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell); 4003 doorbell &= MPI_IOC_STATE_MASK; 4004 4005 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT 4006 "looking for READY STATE: doorbell=%x" 4007 " count=%d\n", 4008 ioc->name, doorbell, count)); 4009 4010 if (doorbell == MPI_IOC_STATE_READY) { 4011 return 1; 4012 } 4013 4014 /* wait 1 sec */ 4015 if (sleepFlag == CAN_SLEEP) 4016 msleep(1000); 4017 else 4018 mdelay(1000); 4019 } 4020 return -1; 4021 } 4022 4023 /* Use "Diagnostic reset" method! (only thing available!) */ 4024 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4025 4026 if (ioc->debug_level & MPT_DEBUG) { 4027 if (ioc->alt_ioc) 4028 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic); 4029 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG1: diag0=%08x, diag1=%08x\n", 4030 ioc->name, diag0val, diag1val)); 4031 } 4032 4033 /* Do the reset if we are told to ignore the reset history 4034 * or if the reset history is 0 4035 */ 4036 if (ignore || !(diag0val & MPI_DIAG_RESET_HISTORY)) { 4037 while ((diag0val & MPI_DIAG_DRWE) == 0) { 4038 /* Write magic sequence to WriteSequence register 4039 * Loop until in diagnostic mode 4040 */ 4041 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); 4042 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE); 4043 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE); 4044 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE); 4045 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE); 4046 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE); 4047 4048 /* wait 100 msec */ 4049 if (sleepFlag == CAN_SLEEP) { 4050 msleep (100); 4051 } else { 4052 mdelay (100); 4053 } 4054 4055 count++; 4056 if (count > 20) { 4057 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n", 4058 ioc->name, diag0val); 4059 return -2; 4060 4061 } 4062 4063 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4064 4065 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wrote magic DiagWriteEn sequence (%x)\n", 4066 ioc->name, diag0val)); 4067 } 4068 4069 if (ioc->debug_level & MPT_DEBUG) { 4070 if (ioc->alt_ioc) 4071 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic); 4072 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG2: diag0=%08x, diag1=%08x\n", 4073 ioc->name, diag0val, diag1val)); 4074 } 4075 /* 4076 * Disable the ARM (Bug fix) 4077 * 4078 */ 4079 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_DISABLE_ARM); 4080 mdelay(1); 4081 4082 /* 4083 * Now hit the reset bit in the Diagnostic register 4084 * (THE BIG HAMMER!) (Clears DRWE bit). 4085 */ 4086 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER); 4087 hard_reset_done = 1; 4088 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset performed\n", 4089 ioc->name)); 4090 4091 /* 4092 * Call each currently registered protocol IOC reset handler 4093 * with pre-reset indication. 4094 * NOTE: If we're doing _IOC_BRINGUP, there can be no 4095 * MptResetHandlers[] registered yet. 4096 */ 4097 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 4098 if (MptResetHandlers[cb_idx]) { 4099 mpt_signal_reset(cb_idx, 4100 ioc, MPT_IOC_PRE_RESET); 4101 if (ioc->alt_ioc) { 4102 mpt_signal_reset(cb_idx, 4103 ioc->alt_ioc, MPT_IOC_PRE_RESET); 4104 } 4105 } 4106 } 4107 4108 if (ioc->cached_fw) 4109 cached_fw = (MpiFwHeader_t *)ioc->cached_fw; 4110 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) 4111 cached_fw = (MpiFwHeader_t *)ioc->alt_ioc->cached_fw; 4112 else 4113 cached_fw = NULL; 4114 if (cached_fw) { 4115 /* If the DownloadBoot operation fails, the 4116 * IOC will be left unusable. This is a fatal error 4117 * case. _diag_reset will return < 0 4118 */ 4119 for (count = 0; count < 30; count ++) { 4120 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4121 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) { 4122 break; 4123 } 4124 4125 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "cached_fw: diag0val=%x count=%d\n", 4126 ioc->name, diag0val, count)); 4127 /* wait 1 sec */ 4128 if (sleepFlag == CAN_SLEEP) { 4129 msleep (1000); 4130 } else { 4131 mdelay (1000); 4132 } 4133 } 4134 if ((count = mpt_downloadboot(ioc, cached_fw, sleepFlag)) < 0) { 4135 printk(MYIOC_s_WARN_FMT 4136 "firmware downloadboot failure (%d)!\n", ioc->name, count); 4137 } 4138 4139 } else { 4140 /* Wait for FW to reload and for board 4141 * to go to the READY state. 4142 * Maximum wait is 60 seconds. 4143 * If fail, no error will check again 4144 * with calling program. 4145 */ 4146 for (count = 0; count < 60; count ++) { 4147 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell); 4148 doorbell &= MPI_IOC_STATE_MASK; 4149 4150 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT 4151 "looking for READY STATE: doorbell=%x" 4152 " count=%d\n", ioc->name, doorbell, count)); 4153 4154 if (doorbell == MPI_IOC_STATE_READY) { 4155 break; 4156 } 4157 4158 /* wait 1 sec */ 4159 if (sleepFlag == CAN_SLEEP) { 4160 msleep (1000); 4161 } else { 4162 mdelay (1000); 4163 } 4164 } 4165 4166 if (doorbell != MPI_IOC_STATE_READY) 4167 printk(MYIOC_s_ERR_FMT "Failed to come READY " 4168 "after reset! IocState=%x", ioc->name, 4169 doorbell); 4170 } 4171 } 4172 4173 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4174 if (ioc->debug_level & MPT_DEBUG) { 4175 if (ioc->alt_ioc) 4176 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic); 4177 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG3: diag0=%08x, diag1=%08x\n", 4178 ioc->name, diag0val, diag1val)); 4179 } 4180 4181 /* Clear RESET_HISTORY bit! Place board in the 4182 * diagnostic mode to update the diag register. 4183 */ 4184 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4185 count = 0; 4186 while ((diag0val & MPI_DIAG_DRWE) == 0) { 4187 /* Write magic sequence to WriteSequence register 4188 * Loop until in diagnostic mode 4189 */ 4190 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); 4191 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE); 4192 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE); 4193 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE); 4194 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE); 4195 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE); 4196 4197 /* wait 100 msec */ 4198 if (sleepFlag == CAN_SLEEP) { 4199 msleep (100); 4200 } else { 4201 mdelay (100); 4202 } 4203 4204 count++; 4205 if (count > 20) { 4206 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n", 4207 ioc->name, diag0val); 4208 break; 4209 } 4210 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4211 } 4212 diag0val &= ~MPI_DIAG_RESET_HISTORY; 4213 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val); 4214 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4215 if (diag0val & MPI_DIAG_RESET_HISTORY) { 4216 printk(MYIOC_s_WARN_FMT "ResetHistory bit failed to clear!\n", 4217 ioc->name); 4218 } 4219 4220 /* Disable Diagnostic Mode 4221 */ 4222 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFFFFFFFF); 4223 4224 /* Check FW reload status flags. 4225 */ 4226 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4227 if (diag0val & (MPI_DIAG_FLASH_BAD_SIG | MPI_DIAG_RESET_ADAPTER | MPI_DIAG_DISABLE_ARM)) { 4228 printk(MYIOC_s_ERR_FMT "Diagnostic reset FAILED! (%02xh)\n", 4229 ioc->name, diag0val); 4230 return -3; 4231 } 4232 4233 if (ioc->debug_level & MPT_DEBUG) { 4234 if (ioc->alt_ioc) 4235 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic); 4236 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG4: diag0=%08x, diag1=%08x\n", 4237 ioc->name, diag0val, diag1val)); 4238 } 4239 4240 /* 4241 * Reset flag that says we've enabled event notification 4242 */ 4243 ioc->facts.EventState = 0; 4244 4245 if (ioc->alt_ioc) 4246 ioc->alt_ioc->facts.EventState = 0; 4247 4248 return hard_reset_done; 4249 } 4250 4251 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4252 /** 4253 * SendIocReset - Send IOCReset request to MPT adapter. 4254 * @ioc: Pointer to MPT_ADAPTER structure 4255 * @reset_type: reset type, expected values are 4256 * %MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET or %MPI_FUNCTION_IO_UNIT_RESET 4257 * @sleepFlag: Specifies whether the process can sleep 4258 * 4259 * Send IOCReset request to the MPT adapter. 4260 * 4261 * Returns 0 for success, non-zero for failure. 4262 */ 4263 static int 4264 SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag) 4265 { 4266 int r; 4267 u32 state; 4268 int cntdn, count; 4269 4270 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOC reset(0x%02x)!\n", 4271 ioc->name, reset_type)); 4272 CHIPREG_WRITE32(&ioc->chip->Doorbell, reset_type<<MPI_DOORBELL_FUNCTION_SHIFT); 4273 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) 4274 return r; 4275 4276 /* FW ACK'd request, wait for READY state 4277 */ 4278 count = 0; 4279 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 15; /* 15 seconds */ 4280 4281 while ((state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) { 4282 cntdn--; 4283 count++; 4284 if (!cntdn) { 4285 if (sleepFlag != CAN_SLEEP) 4286 count *= 10; 4287 4288 printk(MYIOC_s_ERR_FMT 4289 "Wait IOC_READY state (0x%x) timeout(%d)!\n", 4290 ioc->name, state, (int)((count+5)/HZ)); 4291 return -ETIME; 4292 } 4293 4294 if (sleepFlag == CAN_SLEEP) { 4295 msleep(1); 4296 } else { 4297 mdelay (1); /* 1 msec delay */ 4298 } 4299 } 4300 4301 /* TODO! 4302 * Cleanup all event stuff for this IOC; re-issue EventNotification 4303 * request if needed. 4304 */ 4305 if (ioc->facts.Function) 4306 ioc->facts.EventState = 0; 4307 4308 return 0; 4309 } 4310 4311 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4312 /** 4313 * initChainBuffers - Allocate memory for and initialize chain buffers 4314 * @ioc: Pointer to MPT_ADAPTER structure 4315 * 4316 * Allocates memory for and initializes chain buffers, 4317 * chain buffer control arrays and spinlock. 4318 */ 4319 static int 4320 initChainBuffers(MPT_ADAPTER *ioc) 4321 { 4322 u8 *mem; 4323 int sz, ii, num_chain; 4324 int scale, num_sge, numSGE; 4325 4326 /* ReqToChain size must equal the req_depth 4327 * index = req_idx 4328 */ 4329 if (ioc->ReqToChain == NULL) { 4330 sz = ioc->req_depth * sizeof(int); 4331 mem = kmalloc(sz, GFP_ATOMIC); 4332 if (mem == NULL) 4333 return -1; 4334 4335 ioc->ReqToChain = (int *) mem; 4336 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReqToChain alloc @ %p, sz=%d bytes\n", 4337 ioc->name, mem, sz)); 4338 mem = kmalloc(sz, GFP_ATOMIC); 4339 if (mem == NULL) 4340 return -1; 4341 4342 ioc->RequestNB = (int *) mem; 4343 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestNB alloc @ %p, sz=%d bytes\n", 4344 ioc->name, mem, sz)); 4345 } 4346 for (ii = 0; ii < ioc->req_depth; ii++) { 4347 ioc->ReqToChain[ii] = MPT_HOST_NO_CHAIN; 4348 } 4349 4350 /* ChainToChain size must equal the total number 4351 * of chain buffers to be allocated. 4352 * index = chain_idx 4353 * 4354 * Calculate the number of chain buffers needed(plus 1) per I/O 4355 * then multiply the maximum number of simultaneous cmds 4356 * 4357 * num_sge = num sge in request frame + last chain buffer 4358 * scale = num sge per chain buffer if no chain element 4359 */ 4360 scale = ioc->req_sz / ioc->SGE_size; 4361 if (ioc->sg_addr_size == sizeof(u64)) 4362 num_sge = scale + (ioc->req_sz - 60) / ioc->SGE_size; 4363 else 4364 num_sge = 1 + scale + (ioc->req_sz - 64) / ioc->SGE_size; 4365 4366 if (ioc->sg_addr_size == sizeof(u64)) { 4367 numSGE = (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale + 4368 (ioc->req_sz - 60) / ioc->SGE_size; 4369 } else { 4370 numSGE = 1 + (scale - 1) * (ioc->facts.MaxChainDepth-1) + 4371 scale + (ioc->req_sz - 64) / ioc->SGE_size; 4372 } 4373 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "num_sge=%d numSGE=%d\n", 4374 ioc->name, num_sge, numSGE)); 4375 4376 if (ioc->bus_type == FC) { 4377 if (numSGE > MPT_SCSI_FC_SG_DEPTH) 4378 numSGE = MPT_SCSI_FC_SG_DEPTH; 4379 } else { 4380 if (numSGE > MPT_SCSI_SG_DEPTH) 4381 numSGE = MPT_SCSI_SG_DEPTH; 4382 } 4383 4384 num_chain = 1; 4385 while (numSGE - num_sge > 0) { 4386 num_chain++; 4387 num_sge += (scale - 1); 4388 } 4389 num_chain++; 4390 4391 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Now numSGE=%d num_sge=%d num_chain=%d\n", 4392 ioc->name, numSGE, num_sge, num_chain)); 4393 4394 if (ioc->bus_type == SPI) 4395 num_chain *= MPT_SCSI_CAN_QUEUE; 4396 else if (ioc->bus_type == SAS) 4397 num_chain *= MPT_SAS_CAN_QUEUE; 4398 else 4399 num_chain *= MPT_FC_CAN_QUEUE; 4400 4401 ioc->num_chain = num_chain; 4402 4403 sz = num_chain * sizeof(int); 4404 if (ioc->ChainToChain == NULL) { 4405 mem = kmalloc(sz, GFP_ATOMIC); 4406 if (mem == NULL) 4407 return -1; 4408 4409 ioc->ChainToChain = (int *) mem; 4410 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainToChain alloc @ %p, sz=%d bytes\n", 4411 ioc->name, mem, sz)); 4412 } else { 4413 mem = (u8 *) ioc->ChainToChain; 4414 } 4415 memset(mem, 0xFF, sz); 4416 return num_chain; 4417 } 4418 4419 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4420 /** 4421 * PrimeIocFifos - Initialize IOC request and reply FIFOs. 4422 * @ioc: Pointer to MPT_ADAPTER structure 4423 * 4424 * This routine allocates memory for the MPT reply and request frame 4425 * pools (if necessary), and primes the IOC reply FIFO with 4426 * reply frames. 4427 * 4428 * Returns 0 for success, non-zero for failure. 4429 */ 4430 static int 4431 PrimeIocFifos(MPT_ADAPTER *ioc) 4432 { 4433 MPT_FRAME_HDR *mf; 4434 unsigned long flags; 4435 dma_addr_t alloc_dma; 4436 u8 *mem; 4437 int i, reply_sz, sz, total_size, num_chain; 4438 u64 dma_mask; 4439 4440 dma_mask = 0; 4441 4442 /* Prime reply FIFO... */ 4443 4444 if (ioc->reply_frames == NULL) { 4445 if ( (num_chain = initChainBuffers(ioc)) < 0) 4446 return -1; 4447 /* 4448 * 1078 errata workaround for the 36GB limitation 4449 */ 4450 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078 && 4451 ioc->dma_mask > DMA_BIT_MASK(35)) { 4452 if (!pci_set_dma_mask(ioc->pcidev, DMA_BIT_MASK(32)) 4453 && !pci_set_consistent_dma_mask(ioc->pcidev, 4454 DMA_BIT_MASK(32))) { 4455 dma_mask = DMA_BIT_MASK(35); 4456 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT 4457 "setting 35 bit addressing for " 4458 "Request/Reply/Chain and Sense Buffers\n", 4459 ioc->name)); 4460 } else { 4461 /*Reseting DMA mask to 64 bit*/ 4462 pci_set_dma_mask(ioc->pcidev, 4463 DMA_BIT_MASK(64)); 4464 pci_set_consistent_dma_mask(ioc->pcidev, 4465 DMA_BIT_MASK(64)); 4466 4467 printk(MYIOC_s_ERR_FMT 4468 "failed setting 35 bit addressing for " 4469 "Request/Reply/Chain and Sense Buffers\n", 4470 ioc->name); 4471 return -1; 4472 } 4473 } 4474 4475 total_size = reply_sz = (ioc->reply_sz * ioc->reply_depth); 4476 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d bytes, ReplyDepth=%d\n", 4477 ioc->name, ioc->reply_sz, ioc->reply_depth)); 4478 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d[%x] bytes\n", 4479 ioc->name, reply_sz, reply_sz)); 4480 4481 sz = (ioc->req_sz * ioc->req_depth); 4482 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d bytes, RequestDepth=%d\n", 4483 ioc->name, ioc->req_sz, ioc->req_depth)); 4484 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d[%x] bytes\n", 4485 ioc->name, sz, sz)); 4486 total_size += sz; 4487 4488 sz = num_chain * ioc->req_sz; /* chain buffer pool size */ 4489 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d bytes, ChainDepth=%d\n", 4490 ioc->name, ioc->req_sz, num_chain)); 4491 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d[%x] bytes num_chain=%d\n", 4492 ioc->name, sz, sz, num_chain)); 4493 4494 total_size += sz; 4495 mem = pci_alloc_consistent(ioc->pcidev, total_size, &alloc_dma); 4496 if (mem == NULL) { 4497 printk(MYIOC_s_ERR_FMT "Unable to allocate Reply, Request, Chain Buffers!\n", 4498 ioc->name); 4499 goto out_fail; 4500 } 4501 4502 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Total alloc @ %p[%p], sz=%d[%x] bytes\n", 4503 ioc->name, mem, (void *)(ulong)alloc_dma, total_size, total_size)); 4504 4505 memset(mem, 0, total_size); 4506 ioc->alloc_total += total_size; 4507 ioc->alloc = mem; 4508 ioc->alloc_dma = alloc_dma; 4509 ioc->alloc_sz = total_size; 4510 ioc->reply_frames = (MPT_FRAME_HDR *) mem; 4511 ioc->reply_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF); 4512 4513 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n", 4514 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma)); 4515 4516 alloc_dma += reply_sz; 4517 mem += reply_sz; 4518 4519 /* Request FIFO - WE manage this! */ 4520 4521 ioc->req_frames = (MPT_FRAME_HDR *) mem; 4522 ioc->req_frames_dma = alloc_dma; 4523 4524 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffers @ %p[%p]\n", 4525 ioc->name, mem, (void *)(ulong)alloc_dma)); 4526 4527 ioc->req_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF); 4528 4529 for (i = 0; i < ioc->req_depth; i++) { 4530 alloc_dma += ioc->req_sz; 4531 mem += ioc->req_sz; 4532 } 4533 4534 ioc->ChainBuffer = mem; 4535 ioc->ChainBufferDMA = alloc_dma; 4536 4537 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffers @ %p(%p)\n", 4538 ioc->name, ioc->ChainBuffer, (void *)(ulong)ioc->ChainBufferDMA)); 4539 4540 /* Initialize the free chain Q. 4541 */ 4542 4543 INIT_LIST_HEAD(&ioc->FreeChainQ); 4544 4545 /* Post the chain buffers to the FreeChainQ. 4546 */ 4547 mem = (u8 *)ioc->ChainBuffer; 4548 for (i=0; i < num_chain; i++) { 4549 mf = (MPT_FRAME_HDR *) mem; 4550 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeChainQ); 4551 mem += ioc->req_sz; 4552 } 4553 4554 /* Initialize Request frames linked list 4555 */ 4556 alloc_dma = ioc->req_frames_dma; 4557 mem = (u8 *) ioc->req_frames; 4558 4559 spin_lock_irqsave(&ioc->FreeQlock, flags); 4560 INIT_LIST_HEAD(&ioc->FreeQ); 4561 for (i = 0; i < ioc->req_depth; i++) { 4562 mf = (MPT_FRAME_HDR *) mem; 4563 4564 /* Queue REQUESTs *internally*! */ 4565 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ); 4566 4567 mem += ioc->req_sz; 4568 } 4569 spin_unlock_irqrestore(&ioc->FreeQlock, flags); 4570 4571 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC); 4572 ioc->sense_buf_pool = 4573 pci_alloc_consistent(ioc->pcidev, sz, &ioc->sense_buf_pool_dma); 4574 if (ioc->sense_buf_pool == NULL) { 4575 printk(MYIOC_s_ERR_FMT "Unable to allocate Sense Buffers!\n", 4576 ioc->name); 4577 goto out_fail; 4578 } 4579 4580 ioc->sense_buf_low_dma = (u32) (ioc->sense_buf_pool_dma & 0xFFFFFFFF); 4581 ioc->alloc_total += sz; 4582 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SenseBuffers @ %p[%p]\n", 4583 ioc->name, ioc->sense_buf_pool, (void *)(ulong)ioc->sense_buf_pool_dma)); 4584 4585 } 4586 4587 /* Post Reply frames to FIFO 4588 */ 4589 alloc_dma = ioc->alloc_dma; 4590 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n", 4591 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma)); 4592 4593 for (i = 0; i < ioc->reply_depth; i++) { 4594 /* Write each address to the IOC! */ 4595 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, alloc_dma); 4596 alloc_dma += ioc->reply_sz; 4597 } 4598 4599 if (dma_mask == DMA_BIT_MASK(35) && !pci_set_dma_mask(ioc->pcidev, 4600 ioc->dma_mask) && !pci_set_consistent_dma_mask(ioc->pcidev, 4601 ioc->dma_mask)) 4602 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT 4603 "restoring 64 bit addressing\n", ioc->name)); 4604 4605 return 0; 4606 4607 out_fail: 4608 4609 if (ioc->alloc != NULL) { 4610 sz = ioc->alloc_sz; 4611 pci_free_consistent(ioc->pcidev, 4612 sz, 4613 ioc->alloc, ioc->alloc_dma); 4614 ioc->reply_frames = NULL; 4615 ioc->req_frames = NULL; 4616 ioc->alloc_total -= sz; 4617 } 4618 if (ioc->sense_buf_pool != NULL) { 4619 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC); 4620 pci_free_consistent(ioc->pcidev, 4621 sz, 4622 ioc->sense_buf_pool, ioc->sense_buf_pool_dma); 4623 ioc->sense_buf_pool = NULL; 4624 } 4625 4626 if (dma_mask == DMA_BIT_MASK(35) && !pci_set_dma_mask(ioc->pcidev, 4627 DMA_BIT_MASK(64)) && !pci_set_consistent_dma_mask(ioc->pcidev, 4628 DMA_BIT_MASK(64))) 4629 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT 4630 "restoring 64 bit addressing\n", ioc->name)); 4631 4632 return -1; 4633 } 4634 4635 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4636 /** 4637 * mpt_handshake_req_reply_wait - Send MPT request to and receive reply 4638 * from IOC via doorbell handshake method. 4639 * @ioc: Pointer to MPT_ADAPTER structure 4640 * @reqBytes: Size of the request in bytes 4641 * @req: Pointer to MPT request frame 4642 * @replyBytes: Expected size of the reply in bytes 4643 * @u16reply: Pointer to area where reply should be written 4644 * @maxwait: Max wait time for a reply (in seconds) 4645 * @sleepFlag: Specifies whether the process can sleep 4646 * 4647 * NOTES: It is the callers responsibility to byte-swap fields in the 4648 * request which are greater than 1 byte in size. It is also the 4649 * callers responsibility to byte-swap response fields which are 4650 * greater than 1 byte in size. 4651 * 4652 * Returns 0 for success, non-zero for failure. 4653 */ 4654 static int 4655 mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, u32 *req, 4656 int replyBytes, u16 *u16reply, int maxwait, int sleepFlag) 4657 { 4658 MPIDefaultReply_t *mptReply; 4659 int failcnt = 0; 4660 int t; 4661 4662 /* 4663 * Get ready to cache a handshake reply 4664 */ 4665 ioc->hs_reply_idx = 0; 4666 mptReply = (MPIDefaultReply_t *) ioc->hs_reply; 4667 mptReply->MsgLength = 0; 4668 4669 /* 4670 * Make sure there are no doorbells (WRITE 0 to IntStatus reg), 4671 * then tell IOC that we want to handshake a request of N words. 4672 * (WRITE u32val to Doorbell reg). 4673 */ 4674 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 4675 CHIPREG_WRITE32(&ioc->chip->Doorbell, 4676 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) | 4677 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT))); 4678 4679 /* 4680 * Wait for IOC's doorbell handshake int 4681 */ 4682 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) 4683 failcnt++; 4684 4685 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request start reqBytes=%d, WaitCnt=%d%s\n", 4686 ioc->name, reqBytes, t, failcnt ? " - MISSING DOORBELL HANDSHAKE!" : "")); 4687 4688 /* Read doorbell and check for active bit */ 4689 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE)) 4690 return -1; 4691 4692 /* 4693 * Clear doorbell int (WRITE 0 to IntStatus reg), 4694 * then wait for IOC to ACKnowledge that it's ready for 4695 * our handshake request. 4696 */ 4697 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 4698 if (!failcnt && (t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) 4699 failcnt++; 4700 4701 if (!failcnt) { 4702 int ii; 4703 u8 *req_as_bytes = (u8 *) req; 4704 4705 /* 4706 * Stuff request words via doorbell handshake, 4707 * with ACK from IOC for each. 4708 */ 4709 for (ii = 0; !failcnt && ii < reqBytes/4; ii++) { 4710 u32 word = ((req_as_bytes[(ii*4) + 0] << 0) | 4711 (req_as_bytes[(ii*4) + 1] << 8) | 4712 (req_as_bytes[(ii*4) + 2] << 16) | 4713 (req_as_bytes[(ii*4) + 3] << 24)); 4714 4715 CHIPREG_WRITE32(&ioc->chip->Doorbell, word); 4716 if ((t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) 4717 failcnt++; 4718 } 4719 4720 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handshake request frame (@%p) header\n", ioc->name, req)); 4721 DBG_DUMP_REQUEST_FRAME_HDR(ioc, (u32 *)req); 4722 4723 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request post done, WaitCnt=%d%s\n", 4724 ioc->name, t, failcnt ? " - MISSING DOORBELL ACK!" : "")); 4725 4726 /* 4727 * Wait for completion of doorbell handshake reply from the IOC 4728 */ 4729 if (!failcnt && (t = WaitForDoorbellReply(ioc, maxwait, sleepFlag)) < 0) 4730 failcnt++; 4731 4732 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake reply count=%d%s\n", 4733 ioc->name, t, failcnt ? " - MISSING DOORBELL REPLY!" : "")); 4734 4735 /* 4736 * Copy out the cached reply... 4737 */ 4738 for (ii=0; ii < min(replyBytes/2,mptReply->MsgLength*2); ii++) 4739 u16reply[ii] = ioc->hs_reply[ii]; 4740 } else { 4741 return -99; 4742 } 4743 4744 return -failcnt; 4745 } 4746 4747 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4748 /** 4749 * WaitForDoorbellAck - Wait for IOC doorbell handshake acknowledge 4750 * @ioc: Pointer to MPT_ADAPTER structure 4751 * @howlong: How long to wait (in seconds) 4752 * @sleepFlag: Specifies whether the process can sleep 4753 * 4754 * This routine waits (up to ~2 seconds max) for IOC doorbell 4755 * handshake ACKnowledge, indicated by the IOP_DOORBELL_STATUS 4756 * bit in its IntStatus register being clear. 4757 * 4758 * Returns a negative value on failure, else wait loop count. 4759 */ 4760 static int 4761 WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag) 4762 { 4763 int cntdn; 4764 int count = 0; 4765 u32 intstat=0; 4766 4767 cntdn = 1000 * howlong; 4768 4769 if (sleepFlag == CAN_SLEEP) { 4770 while (--cntdn) { 4771 msleep (1); 4772 intstat = CHIPREG_READ32(&ioc->chip->IntStatus); 4773 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS)) 4774 break; 4775 count++; 4776 } 4777 } else { 4778 while (--cntdn) { 4779 udelay (1000); 4780 intstat = CHIPREG_READ32(&ioc->chip->IntStatus); 4781 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS)) 4782 break; 4783 count++; 4784 } 4785 } 4786 4787 if (cntdn) { 4788 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell ACK (count=%d)\n", 4789 ioc->name, count)); 4790 return count; 4791 } 4792 4793 printk(MYIOC_s_ERR_FMT "Doorbell ACK timeout (count=%d), IntStatus=%x!\n", 4794 ioc->name, count, intstat); 4795 return -1; 4796 } 4797 4798 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4799 /** 4800 * WaitForDoorbellInt - Wait for IOC to set its doorbell interrupt bit 4801 * @ioc: Pointer to MPT_ADAPTER structure 4802 * @howlong: How long to wait (in seconds) 4803 * @sleepFlag: Specifies whether the process can sleep 4804 * 4805 * This routine waits (up to ~2 seconds max) for IOC doorbell interrupt 4806 * (MPI_HIS_DOORBELL_INTERRUPT) to be set in the IntStatus register. 4807 * 4808 * Returns a negative value on failure, else wait loop count. 4809 */ 4810 static int 4811 WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag) 4812 { 4813 int cntdn; 4814 int count = 0; 4815 u32 intstat=0; 4816 4817 cntdn = 1000 * howlong; 4818 if (sleepFlag == CAN_SLEEP) { 4819 while (--cntdn) { 4820 intstat = CHIPREG_READ32(&ioc->chip->IntStatus); 4821 if (intstat & MPI_HIS_DOORBELL_INTERRUPT) 4822 break; 4823 msleep(1); 4824 count++; 4825 } 4826 } else { 4827 while (--cntdn) { 4828 intstat = CHIPREG_READ32(&ioc->chip->IntStatus); 4829 if (intstat & MPI_HIS_DOORBELL_INTERRUPT) 4830 break; 4831 udelay (1000); 4832 count++; 4833 } 4834 } 4835 4836 if (cntdn) { 4837 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell INT (cnt=%d) howlong=%d\n", 4838 ioc->name, count, howlong)); 4839 return count; 4840 } 4841 4842 printk(MYIOC_s_ERR_FMT "Doorbell INT timeout (count=%d), IntStatus=%x!\n", 4843 ioc->name, count, intstat); 4844 return -1; 4845 } 4846 4847 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4848 /** 4849 * WaitForDoorbellReply - Wait for and capture an IOC handshake reply. 4850 * @ioc: Pointer to MPT_ADAPTER structure 4851 * @howlong: How long to wait (in seconds) 4852 * @sleepFlag: Specifies whether the process can sleep 4853 * 4854 * This routine polls the IOC for a handshake reply, 16 bits at a time. 4855 * Reply is cached to IOC private area large enough to hold a maximum 4856 * of 128 bytes of reply data. 4857 * 4858 * Returns a negative value on failure, else size of reply in WORDS. 4859 */ 4860 static int 4861 WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag) 4862 { 4863 int u16cnt = 0; 4864 int failcnt = 0; 4865 int t; 4866 u16 *hs_reply = ioc->hs_reply; 4867 volatile MPIDefaultReply_t *mptReply = (MPIDefaultReply_t *) ioc->hs_reply; 4868 u16 hword; 4869 4870 hs_reply[0] = hs_reply[1] = hs_reply[7] = 0; 4871 4872 /* 4873 * Get first two u16's so we can look at IOC's intended reply MsgLength 4874 */ 4875 u16cnt=0; 4876 if ((t = WaitForDoorbellInt(ioc, howlong, sleepFlag)) < 0) { 4877 failcnt++; 4878 } else { 4879 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF); 4880 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 4881 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) 4882 failcnt++; 4883 else { 4884 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF); 4885 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 4886 } 4887 } 4888 4889 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitCnt=%d First handshake reply word=%08x%s\n", 4890 ioc->name, t, le32_to_cpu(*(u32 *)hs_reply), 4891 failcnt ? " - MISSING DOORBELL HANDSHAKE!" : "")); 4892 4893 /* 4894 * If no error (and IOC said MsgLength is > 0), piece together 4895 * reply 16 bits at a time. 4896 */ 4897 for (u16cnt=2; !failcnt && u16cnt < (2 * mptReply->MsgLength); u16cnt++) { 4898 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) 4899 failcnt++; 4900 hword = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF); 4901 /* don't overflow our IOC hs_reply[] buffer! */ 4902 if (u16cnt < ARRAY_SIZE(ioc->hs_reply)) 4903 hs_reply[u16cnt] = hword; 4904 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 4905 } 4906 4907 if (!failcnt && (t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) 4908 failcnt++; 4909 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 4910 4911 if (failcnt) { 4912 printk(MYIOC_s_ERR_FMT "Handshake reply failure!\n", 4913 ioc->name); 4914 return -failcnt; 4915 } 4916 #if 0 4917 else if (u16cnt != (2 * mptReply->MsgLength)) { 4918 return -101; 4919 } 4920 else if ((mptReply->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) { 4921 return -102; 4922 } 4923 #endif 4924 4925 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got Handshake reply:\n", ioc->name)); 4926 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mptReply); 4927 4928 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell REPLY WaitCnt=%d (sz=%d)\n", 4929 ioc->name, t, u16cnt/2)); 4930 return u16cnt/2; 4931 } 4932 4933 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4934 /** 4935 * GetLanConfigPages - Fetch LANConfig pages. 4936 * @ioc: Pointer to MPT_ADAPTER structure 4937 * 4938 * Return: 0 for success 4939 * -ENOMEM if no memory available 4940 * -EPERM if not allowed due to ISR context 4941 * -EAGAIN if no msg frames currently available 4942 * -EFAULT for non-successful reply or no reply (timeout) 4943 */ 4944 static int 4945 GetLanConfigPages(MPT_ADAPTER *ioc) 4946 { 4947 ConfigPageHeader_t hdr; 4948 CONFIGPARMS cfg; 4949 LANPage0_t *ppage0_alloc; 4950 dma_addr_t page0_dma; 4951 LANPage1_t *ppage1_alloc; 4952 dma_addr_t page1_dma; 4953 int rc = 0; 4954 int data_sz; 4955 int copy_sz; 4956 4957 /* Get LAN Page 0 header */ 4958 hdr.PageVersion = 0; 4959 hdr.PageLength = 0; 4960 hdr.PageNumber = 0; 4961 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN; 4962 cfg.cfghdr.hdr = &hdr; 4963 cfg.physAddr = -1; 4964 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 4965 cfg.dir = 0; 4966 cfg.pageAddr = 0; 4967 cfg.timeout = 0; 4968 4969 if ((rc = mpt_config(ioc, &cfg)) != 0) 4970 return rc; 4971 4972 if (hdr.PageLength > 0) { 4973 data_sz = hdr.PageLength * 4; 4974 ppage0_alloc = (LANPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma); 4975 rc = -ENOMEM; 4976 if (ppage0_alloc) { 4977 memset((u8 *)ppage0_alloc, 0, data_sz); 4978 cfg.physAddr = page0_dma; 4979 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 4980 4981 if ((rc = mpt_config(ioc, &cfg)) == 0) { 4982 /* save the data */ 4983 copy_sz = min_t(int, sizeof(LANPage0_t), data_sz); 4984 memcpy(&ioc->lan_cnfg_page0, ppage0_alloc, copy_sz); 4985 4986 } 4987 4988 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma); 4989 4990 /* FIXME! 4991 * Normalize endianness of structure data, 4992 * by byte-swapping all > 1 byte fields! 4993 */ 4994 4995 } 4996 4997 if (rc) 4998 return rc; 4999 } 5000 5001 /* Get LAN Page 1 header */ 5002 hdr.PageVersion = 0; 5003 hdr.PageLength = 0; 5004 hdr.PageNumber = 1; 5005 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN; 5006 cfg.cfghdr.hdr = &hdr; 5007 cfg.physAddr = -1; 5008 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5009 cfg.dir = 0; 5010 cfg.pageAddr = 0; 5011 5012 if ((rc = mpt_config(ioc, &cfg)) != 0) 5013 return rc; 5014 5015 if (hdr.PageLength == 0) 5016 return 0; 5017 5018 data_sz = hdr.PageLength * 4; 5019 rc = -ENOMEM; 5020 ppage1_alloc = (LANPage1_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page1_dma); 5021 if (ppage1_alloc) { 5022 memset((u8 *)ppage1_alloc, 0, data_sz); 5023 cfg.physAddr = page1_dma; 5024 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5025 5026 if ((rc = mpt_config(ioc, &cfg)) == 0) { 5027 /* save the data */ 5028 copy_sz = min_t(int, sizeof(LANPage1_t), data_sz); 5029 memcpy(&ioc->lan_cnfg_page1, ppage1_alloc, copy_sz); 5030 } 5031 5032 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage1_alloc, page1_dma); 5033 5034 /* FIXME! 5035 * Normalize endianness of structure data, 5036 * by byte-swapping all > 1 byte fields! 5037 */ 5038 5039 } 5040 5041 return rc; 5042 } 5043 5044 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 5045 /** 5046 * mptbase_sas_persist_operation - Perform operation on SAS Persistent Table 5047 * @ioc: Pointer to MPT_ADAPTER structure 5048 * @persist_opcode: see below 5049 * 5050 * MPI_SAS_OP_CLEAR_NOT_PRESENT - Free all persist TargetID mappings for 5051 * devices not currently present. 5052 * MPI_SAS_OP_CLEAR_ALL_PERSISTENT - Clear al persist TargetID mappings 5053 * 5054 * NOTE: Don't use not this function during interrupt time. 5055 * 5056 * Returns 0 for success, non-zero error 5057 */ 5058 5059 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 5060 int 5061 mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode) 5062 { 5063 SasIoUnitControlRequest_t *sasIoUnitCntrReq; 5064 SasIoUnitControlReply_t *sasIoUnitCntrReply; 5065 MPT_FRAME_HDR *mf = NULL; 5066 MPIHeader_t *mpi_hdr; 5067 int ret = 0; 5068 unsigned long timeleft; 5069 5070 mutex_lock(&ioc->mptbase_cmds.mutex); 5071 5072 /* init the internal cmd struct */ 5073 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE); 5074 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status) 5075 5076 /* insure garbage is not sent to fw */ 5077 switch(persist_opcode) { 5078 5079 case MPI_SAS_OP_CLEAR_NOT_PRESENT: 5080 case MPI_SAS_OP_CLEAR_ALL_PERSISTENT: 5081 break; 5082 5083 default: 5084 ret = -1; 5085 goto out; 5086 } 5087 5088 printk(KERN_DEBUG "%s: persist_opcode=%x\n", 5089 __func__, persist_opcode); 5090 5091 /* Get a MF for this command. 5092 */ 5093 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) { 5094 printk(KERN_DEBUG "%s: no msg frames!\n", __func__); 5095 ret = -1; 5096 goto out; 5097 } 5098 5099 mpi_hdr = (MPIHeader_t *) mf; 5100 sasIoUnitCntrReq = (SasIoUnitControlRequest_t *)mf; 5101 memset(sasIoUnitCntrReq,0,sizeof(SasIoUnitControlRequest_t)); 5102 sasIoUnitCntrReq->Function = MPI_FUNCTION_SAS_IO_UNIT_CONTROL; 5103 sasIoUnitCntrReq->MsgContext = mpi_hdr->MsgContext; 5104 sasIoUnitCntrReq->Operation = persist_opcode; 5105 5106 mpt_put_msg_frame(mpt_base_index, ioc, mf); 5107 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done, 10*HZ); 5108 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { 5109 ret = -ETIME; 5110 printk(KERN_DEBUG "%s: failed\n", __func__); 5111 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) 5112 goto out; 5113 if (!timeleft) { 5114 printk(MYIOC_s_WARN_FMT 5115 "Issuing Reset from %s!!, doorbell=0x%08x\n", 5116 ioc->name, __func__, mpt_GetIocState(ioc, 0)); 5117 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); 5118 mpt_free_msg_frame(ioc, mf); 5119 } 5120 goto out; 5121 } 5122 5123 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) { 5124 ret = -1; 5125 goto out; 5126 } 5127 5128 sasIoUnitCntrReply = 5129 (SasIoUnitControlReply_t *)ioc->mptbase_cmds.reply; 5130 if (le16_to_cpu(sasIoUnitCntrReply->IOCStatus) != MPI_IOCSTATUS_SUCCESS) { 5131 printk(KERN_DEBUG "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n", 5132 __func__, sasIoUnitCntrReply->IOCStatus, 5133 sasIoUnitCntrReply->IOCLogInfo); 5134 printk(KERN_DEBUG "%s: failed\n", __func__); 5135 ret = -1; 5136 } else 5137 printk(KERN_DEBUG "%s: success\n", __func__); 5138 out: 5139 5140 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status) 5141 mutex_unlock(&ioc->mptbase_cmds.mutex); 5142 return ret; 5143 } 5144 5145 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 5146 5147 static void 5148 mptbase_raid_process_event_data(MPT_ADAPTER *ioc, 5149 MpiEventDataRaid_t * pRaidEventData) 5150 { 5151 int volume; 5152 int reason; 5153 int disk; 5154 int status; 5155 int flags; 5156 int state; 5157 5158 volume = pRaidEventData->VolumeID; 5159 reason = pRaidEventData->ReasonCode; 5160 disk = pRaidEventData->PhysDiskNum; 5161 status = le32_to_cpu(pRaidEventData->SettingsStatus); 5162 flags = (status >> 0) & 0xff; 5163 state = (status >> 8) & 0xff; 5164 5165 if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) { 5166 return; 5167 } 5168 5169 if ((reason >= MPI_EVENT_RAID_RC_PHYSDISK_CREATED && 5170 reason <= MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED) || 5171 (reason == MPI_EVENT_RAID_RC_SMART_DATA)) { 5172 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d id=%d\n", 5173 ioc->name, disk, volume); 5174 } else { 5175 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for VolumeID %d\n", 5176 ioc->name, volume); 5177 } 5178 5179 switch(reason) { 5180 case MPI_EVENT_RAID_RC_VOLUME_CREATED: 5181 printk(MYIOC_s_INFO_FMT " volume has been created\n", 5182 ioc->name); 5183 break; 5184 5185 case MPI_EVENT_RAID_RC_VOLUME_DELETED: 5186 5187 printk(MYIOC_s_INFO_FMT " volume has been deleted\n", 5188 ioc->name); 5189 break; 5190 5191 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED: 5192 printk(MYIOC_s_INFO_FMT " volume settings have been changed\n", 5193 ioc->name); 5194 break; 5195 5196 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED: 5197 printk(MYIOC_s_INFO_FMT " volume is now %s%s%s%s\n", 5198 ioc->name, 5199 state == MPI_RAIDVOL0_STATUS_STATE_OPTIMAL 5200 ? "optimal" 5201 : state == MPI_RAIDVOL0_STATUS_STATE_DEGRADED 5202 ? "degraded" 5203 : state == MPI_RAIDVOL0_STATUS_STATE_FAILED 5204 ? "failed" 5205 : "state unknown", 5206 flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED 5207 ? ", enabled" : "", 5208 flags & MPI_RAIDVOL0_STATUS_FLAG_QUIESCED 5209 ? ", quiesced" : "", 5210 flags & MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS 5211 ? ", resync in progress" : "" ); 5212 break; 5213 5214 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED: 5215 printk(MYIOC_s_INFO_FMT " volume membership of PhysDisk %d has changed\n", 5216 ioc->name, disk); 5217 break; 5218 5219 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED: 5220 printk(MYIOC_s_INFO_FMT " PhysDisk has been created\n", 5221 ioc->name); 5222 break; 5223 5224 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED: 5225 printk(MYIOC_s_INFO_FMT " PhysDisk has been deleted\n", 5226 ioc->name); 5227 break; 5228 5229 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED: 5230 printk(MYIOC_s_INFO_FMT " PhysDisk settings have been changed\n", 5231 ioc->name); 5232 break; 5233 5234 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED: 5235 printk(MYIOC_s_INFO_FMT " PhysDisk is now %s%s%s\n", 5236 ioc->name, 5237 state == MPI_PHYSDISK0_STATUS_ONLINE 5238 ? "online" 5239 : state == MPI_PHYSDISK0_STATUS_MISSING 5240 ? "missing" 5241 : state == MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE 5242 ? "not compatible" 5243 : state == MPI_PHYSDISK0_STATUS_FAILED 5244 ? "failed" 5245 : state == MPI_PHYSDISK0_STATUS_INITIALIZING 5246 ? "initializing" 5247 : state == MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED 5248 ? "offline requested" 5249 : state == MPI_PHYSDISK0_STATUS_FAILED_REQUESTED 5250 ? "failed requested" 5251 : state == MPI_PHYSDISK0_STATUS_OTHER_OFFLINE 5252 ? "offline" 5253 : "state unknown", 5254 flags & MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC 5255 ? ", out of sync" : "", 5256 flags & MPI_PHYSDISK0_STATUS_FLAG_QUIESCED 5257 ? ", quiesced" : "" ); 5258 break; 5259 5260 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED: 5261 printk(MYIOC_s_INFO_FMT " Domain Validation needed for PhysDisk %d\n", 5262 ioc->name, disk); 5263 break; 5264 5265 case MPI_EVENT_RAID_RC_SMART_DATA: 5266 printk(MYIOC_s_INFO_FMT " SMART data received, ASC/ASCQ = %02xh/%02xh\n", 5267 ioc->name, pRaidEventData->ASC, pRaidEventData->ASCQ); 5268 break; 5269 5270 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED: 5271 printk(MYIOC_s_INFO_FMT " replacement of PhysDisk %d has started\n", 5272 ioc->name, disk); 5273 break; 5274 } 5275 } 5276 5277 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 5278 /** 5279 * GetIoUnitPage2 - Retrieve BIOS version and boot order information. 5280 * @ioc: Pointer to MPT_ADAPTER structure 5281 * 5282 * Returns: 0 for success 5283 * -ENOMEM if no memory available 5284 * -EPERM if not allowed due to ISR context 5285 * -EAGAIN if no msg frames currently available 5286 * -EFAULT for non-successful reply or no reply (timeout) 5287 */ 5288 static int 5289 GetIoUnitPage2(MPT_ADAPTER *ioc) 5290 { 5291 ConfigPageHeader_t hdr; 5292 CONFIGPARMS cfg; 5293 IOUnitPage2_t *ppage_alloc; 5294 dma_addr_t page_dma; 5295 int data_sz; 5296 int rc; 5297 5298 /* Get the page header */ 5299 hdr.PageVersion = 0; 5300 hdr.PageLength = 0; 5301 hdr.PageNumber = 2; 5302 hdr.PageType = MPI_CONFIG_PAGETYPE_IO_UNIT; 5303 cfg.cfghdr.hdr = &hdr; 5304 cfg.physAddr = -1; 5305 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5306 cfg.dir = 0; 5307 cfg.pageAddr = 0; 5308 cfg.timeout = 0; 5309 5310 if ((rc = mpt_config(ioc, &cfg)) != 0) 5311 return rc; 5312 5313 if (hdr.PageLength == 0) 5314 return 0; 5315 5316 /* Read the config page */ 5317 data_sz = hdr.PageLength * 4; 5318 rc = -ENOMEM; 5319 ppage_alloc = (IOUnitPage2_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page_dma); 5320 if (ppage_alloc) { 5321 memset((u8 *)ppage_alloc, 0, data_sz); 5322 cfg.physAddr = page_dma; 5323 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5324 5325 /* If Good, save data */ 5326 if ((rc = mpt_config(ioc, &cfg)) == 0) 5327 ioc->biosVersion = le32_to_cpu(ppage_alloc->BiosVersion); 5328 5329 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage_alloc, page_dma); 5330 } 5331 5332 return rc; 5333 } 5334 5335 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 5336 /** 5337 * mpt_GetScsiPortSettings - read SCSI Port Page 0 and 2 5338 * @ioc: Pointer to a Adapter Strucutre 5339 * @portnum: IOC port number 5340 * 5341 * Return: -EFAULT if read of config page header fails 5342 * or if no nvram 5343 * If read of SCSI Port Page 0 fails, 5344 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF) 5345 * Adapter settings: async, narrow 5346 * Return 1 5347 * If read of SCSI Port Page 2 fails, 5348 * Adapter settings valid 5349 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF) 5350 * Return 1 5351 * Else 5352 * Both valid 5353 * Return 0 5354 * CHECK - what type of locking mechanisms should be used???? 5355 */ 5356 static int 5357 mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum) 5358 { 5359 u8 *pbuf; 5360 dma_addr_t buf_dma; 5361 CONFIGPARMS cfg; 5362 ConfigPageHeader_t header; 5363 int ii; 5364 int data, rc = 0; 5365 5366 /* Allocate memory 5367 */ 5368 if (!ioc->spi_data.nvram) { 5369 int sz; 5370 u8 *mem; 5371 sz = MPT_MAX_SCSI_DEVICES * sizeof(int); 5372 mem = kmalloc(sz, GFP_ATOMIC); 5373 if (mem == NULL) 5374 return -EFAULT; 5375 5376 ioc->spi_data.nvram = (int *) mem; 5377 5378 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SCSI device NVRAM settings @ %p, sz=%d\n", 5379 ioc->name, ioc->spi_data.nvram, sz)); 5380 } 5381 5382 /* Invalidate NVRAM information 5383 */ 5384 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) { 5385 ioc->spi_data.nvram[ii] = MPT_HOST_NVRAM_INVALID; 5386 } 5387 5388 /* Read SPP0 header, allocate memory, then read page. 5389 */ 5390 header.PageVersion = 0; 5391 header.PageLength = 0; 5392 header.PageNumber = 0; 5393 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT; 5394 cfg.cfghdr.hdr = &header; 5395 cfg.physAddr = -1; 5396 cfg.pageAddr = portnum; 5397 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5398 cfg.dir = 0; 5399 cfg.timeout = 0; /* use default */ 5400 if (mpt_config(ioc, &cfg) != 0) 5401 return -EFAULT; 5402 5403 if (header.PageLength > 0) { 5404 pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma); 5405 if (pbuf) { 5406 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5407 cfg.physAddr = buf_dma; 5408 if (mpt_config(ioc, &cfg) != 0) { 5409 ioc->spi_data.maxBusWidth = MPT_NARROW; 5410 ioc->spi_data.maxSyncOffset = 0; 5411 ioc->spi_data.minSyncFactor = MPT_ASYNC; 5412 ioc->spi_data.busType = MPT_HOST_BUS_UNKNOWN; 5413 rc = 1; 5414 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT 5415 "Unable to read PortPage0 minSyncFactor=%x\n", 5416 ioc->name, ioc->spi_data.minSyncFactor)); 5417 } else { 5418 /* Save the Port Page 0 data 5419 */ 5420 SCSIPortPage0_t *pPP0 = (SCSIPortPage0_t *) pbuf; 5421 pPP0->Capabilities = le32_to_cpu(pPP0->Capabilities); 5422 pPP0->PhysicalInterface = le32_to_cpu(pPP0->PhysicalInterface); 5423 5424 if ( (pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_QAS) == 0 ) { 5425 ioc->spi_data.noQas |= MPT_TARGET_NO_NEGO_QAS; 5426 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT 5427 "noQas due to Capabilities=%x\n", 5428 ioc->name, pPP0->Capabilities)); 5429 } 5430 ioc->spi_data.maxBusWidth = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_WIDE ? 1 : 0; 5431 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK; 5432 if (data) { 5433 ioc->spi_data.maxSyncOffset = (u8) (data >> 16); 5434 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK; 5435 ioc->spi_data.minSyncFactor = (u8) (data >> 8); 5436 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT 5437 "PortPage0 minSyncFactor=%x\n", 5438 ioc->name, ioc->spi_data.minSyncFactor)); 5439 } else { 5440 ioc->spi_data.maxSyncOffset = 0; 5441 ioc->spi_data.minSyncFactor = MPT_ASYNC; 5442 } 5443 5444 ioc->spi_data.busType = pPP0->PhysicalInterface & MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK; 5445 5446 /* Update the minSyncFactor based on bus type. 5447 */ 5448 if ((ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD) || 5449 (ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE)) { 5450 5451 if (ioc->spi_data.minSyncFactor < MPT_ULTRA) { 5452 ioc->spi_data.minSyncFactor = MPT_ULTRA; 5453 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT 5454 "HVD or SE detected, minSyncFactor=%x\n", 5455 ioc->name, ioc->spi_data.minSyncFactor)); 5456 } 5457 } 5458 } 5459 if (pbuf) { 5460 pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma); 5461 } 5462 } 5463 } 5464 5465 /* SCSI Port Page 2 - Read the header then the page. 5466 */ 5467 header.PageVersion = 0; 5468 header.PageLength = 0; 5469 header.PageNumber = 2; 5470 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT; 5471 cfg.cfghdr.hdr = &header; 5472 cfg.physAddr = -1; 5473 cfg.pageAddr = portnum; 5474 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5475 cfg.dir = 0; 5476 if (mpt_config(ioc, &cfg) != 0) 5477 return -EFAULT; 5478 5479 if (header.PageLength > 0) { 5480 /* Allocate memory and read SCSI Port Page 2 5481 */ 5482 pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma); 5483 if (pbuf) { 5484 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_NVRAM; 5485 cfg.physAddr = buf_dma; 5486 if (mpt_config(ioc, &cfg) != 0) { 5487 /* Nvram data is left with INVALID mark 5488 */ 5489 rc = 1; 5490 } else if (ioc->pcidev->vendor == PCI_VENDOR_ID_ATTO) { 5491 5492 /* This is an ATTO adapter, read Page2 accordingly 5493 */ 5494 ATTO_SCSIPortPage2_t *pPP2 = (ATTO_SCSIPortPage2_t *) pbuf; 5495 ATTODeviceInfo_t *pdevice = NULL; 5496 u16 ATTOFlags; 5497 5498 /* Save the Port Page 2 data 5499 * (reformat into a 32bit quantity) 5500 */ 5501 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) { 5502 pdevice = &pPP2->DeviceSettings[ii]; 5503 ATTOFlags = le16_to_cpu(pdevice->ATTOFlags); 5504 data = 0; 5505 5506 /* Translate ATTO device flags to LSI format 5507 */ 5508 if (ATTOFlags & ATTOFLAG_DISC) 5509 data |= (MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE); 5510 if (ATTOFlags & ATTOFLAG_ID_ENB) 5511 data |= (MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE); 5512 if (ATTOFlags & ATTOFLAG_LUN_ENB) 5513 data |= (MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE); 5514 if (ATTOFlags & ATTOFLAG_TAGGED) 5515 data |= (MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE); 5516 if (!(ATTOFlags & ATTOFLAG_WIDE_ENB)) 5517 data |= (MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE); 5518 5519 data = (data << 16) | (pdevice->Period << 8) | 10; 5520 ioc->spi_data.nvram[ii] = data; 5521 } 5522 } else { 5523 SCSIPortPage2_t *pPP2 = (SCSIPortPage2_t *) pbuf; 5524 MpiDeviceInfo_t *pdevice = NULL; 5525 5526 /* 5527 * Save "Set to Avoid SCSI Bus Resets" flag 5528 */ 5529 ioc->spi_data.bus_reset = 5530 (le32_to_cpu(pPP2->PortFlags) & 5531 MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET) ? 5532 0 : 1 ; 5533 5534 /* Save the Port Page 2 data 5535 * (reformat into a 32bit quantity) 5536 */ 5537 data = le32_to_cpu(pPP2->PortFlags) & MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK; 5538 ioc->spi_data.PortFlags = data; 5539 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) { 5540 pdevice = &pPP2->DeviceSettings[ii]; 5541 data = (le16_to_cpu(pdevice->DeviceFlags) << 16) | 5542 (pdevice->SyncFactor << 8) | pdevice->Timeout; 5543 ioc->spi_data.nvram[ii] = data; 5544 } 5545 } 5546 5547 pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma); 5548 } 5549 } 5550 5551 /* Update Adapter limits with those from NVRAM 5552 * Comment: Don't need to do this. Target performance 5553 * parameters will never exceed the adapters limits. 5554 */ 5555 5556 return rc; 5557 } 5558 5559 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 5560 /** 5561 * mpt_readScsiDevicePageHeaders - save version and length of SDP1 5562 * @ioc: Pointer to a Adapter Strucutre 5563 * @portnum: IOC port number 5564 * 5565 * Return: -EFAULT if read of config page header fails 5566 * or 0 if success. 5567 */ 5568 static int 5569 mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum) 5570 { 5571 CONFIGPARMS cfg; 5572 ConfigPageHeader_t header; 5573 5574 /* Read the SCSI Device Page 1 header 5575 */ 5576 header.PageVersion = 0; 5577 header.PageLength = 0; 5578 header.PageNumber = 1; 5579 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; 5580 cfg.cfghdr.hdr = &header; 5581 cfg.physAddr = -1; 5582 cfg.pageAddr = portnum; 5583 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5584 cfg.dir = 0; 5585 cfg.timeout = 0; 5586 if (mpt_config(ioc, &cfg) != 0) 5587 return -EFAULT; 5588 5589 ioc->spi_data.sdp1version = cfg.cfghdr.hdr->PageVersion; 5590 ioc->spi_data.sdp1length = cfg.cfghdr.hdr->PageLength; 5591 5592 header.PageVersion = 0; 5593 header.PageLength = 0; 5594 header.PageNumber = 0; 5595 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; 5596 if (mpt_config(ioc, &cfg) != 0) 5597 return -EFAULT; 5598 5599 ioc->spi_data.sdp0version = cfg.cfghdr.hdr->PageVersion; 5600 ioc->spi_data.sdp0length = cfg.cfghdr.hdr->PageLength; 5601 5602 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 0: version %d length %d\n", 5603 ioc->name, ioc->spi_data.sdp0version, ioc->spi_data.sdp0length)); 5604 5605 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 1: version %d length %d\n", 5606 ioc->name, ioc->spi_data.sdp1version, ioc->spi_data.sdp1length)); 5607 return 0; 5608 } 5609 5610 /** 5611 * mpt_inactive_raid_list_free - This clears this link list. 5612 * @ioc : pointer to per adapter structure 5613 **/ 5614 static void 5615 mpt_inactive_raid_list_free(MPT_ADAPTER *ioc) 5616 { 5617 struct inactive_raid_component_info *component_info, *pNext; 5618 5619 if (list_empty(&ioc->raid_data.inactive_list)) 5620 return; 5621 5622 mutex_lock(&ioc->raid_data.inactive_list_mutex); 5623 list_for_each_entry_safe(component_info, pNext, 5624 &ioc->raid_data.inactive_list, list) { 5625 list_del(&component_info->list); 5626 kfree(component_info); 5627 } 5628 mutex_unlock(&ioc->raid_data.inactive_list_mutex); 5629 } 5630 5631 /** 5632 * mpt_inactive_raid_volumes - sets up link list of phy_disk_nums for devices belonging in an inactive volume 5633 * 5634 * @ioc : pointer to per adapter structure 5635 * @channel : volume channel 5636 * @id : volume target id 5637 **/ 5638 static void 5639 mpt_inactive_raid_volumes(MPT_ADAPTER *ioc, u8 channel, u8 id) 5640 { 5641 CONFIGPARMS cfg; 5642 ConfigPageHeader_t hdr; 5643 dma_addr_t dma_handle; 5644 pRaidVolumePage0_t buffer = NULL; 5645 int i; 5646 RaidPhysDiskPage0_t phys_disk; 5647 struct inactive_raid_component_info *component_info; 5648 int handle_inactive_volumes; 5649 5650 memset(&cfg, 0 , sizeof(CONFIGPARMS)); 5651 memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); 5652 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME; 5653 cfg.pageAddr = (channel << 8) + id; 5654 cfg.cfghdr.hdr = &hdr; 5655 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5656 5657 if (mpt_config(ioc, &cfg) != 0) 5658 goto out; 5659 5660 if (!hdr.PageLength) 5661 goto out; 5662 5663 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, 5664 &dma_handle); 5665 5666 if (!buffer) 5667 goto out; 5668 5669 cfg.physAddr = dma_handle; 5670 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5671 5672 if (mpt_config(ioc, &cfg) != 0) 5673 goto out; 5674 5675 if (!buffer->NumPhysDisks) 5676 goto out; 5677 5678 handle_inactive_volumes = 5679 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE || 5680 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED) == 0 || 5681 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_FAILED || 5682 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_MISSING) ? 1 : 0; 5683 5684 if (!handle_inactive_volumes) 5685 goto out; 5686 5687 mutex_lock(&ioc->raid_data.inactive_list_mutex); 5688 for (i = 0; i < buffer->NumPhysDisks; i++) { 5689 if(mpt_raid_phys_disk_pg0(ioc, 5690 buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0) 5691 continue; 5692 5693 if ((component_info = kmalloc(sizeof (*component_info), 5694 GFP_KERNEL)) == NULL) 5695 continue; 5696 5697 component_info->volumeID = id; 5698 component_info->volumeBus = channel; 5699 component_info->d.PhysDiskNum = phys_disk.PhysDiskNum; 5700 component_info->d.PhysDiskBus = phys_disk.PhysDiskBus; 5701 component_info->d.PhysDiskID = phys_disk.PhysDiskID; 5702 component_info->d.PhysDiskIOC = phys_disk.PhysDiskIOC; 5703 5704 list_add_tail(&component_info->list, 5705 &ioc->raid_data.inactive_list); 5706 } 5707 mutex_unlock(&ioc->raid_data.inactive_list_mutex); 5708 5709 out: 5710 if (buffer) 5711 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer, 5712 dma_handle); 5713 } 5714 5715 /** 5716 * mpt_raid_phys_disk_pg0 - returns phys disk page zero 5717 * @ioc: Pointer to a Adapter Structure 5718 * @phys_disk_num: io unit unique phys disk num generated by the ioc 5719 * @phys_disk: requested payload data returned 5720 * 5721 * Return: 5722 * 0 on success 5723 * -EFAULT if read of config page header fails or data pointer not NULL 5724 * -ENOMEM if pci_alloc failed 5725 **/ 5726 int 5727 mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num, 5728 RaidPhysDiskPage0_t *phys_disk) 5729 { 5730 CONFIGPARMS cfg; 5731 ConfigPageHeader_t hdr; 5732 dma_addr_t dma_handle; 5733 pRaidPhysDiskPage0_t buffer = NULL; 5734 int rc; 5735 5736 memset(&cfg, 0 , sizeof(CONFIGPARMS)); 5737 memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); 5738 memset(phys_disk, 0, sizeof(RaidPhysDiskPage0_t)); 5739 5740 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE0_PAGEVERSION; 5741 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK; 5742 cfg.cfghdr.hdr = &hdr; 5743 cfg.physAddr = -1; 5744 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5745 5746 if (mpt_config(ioc, &cfg) != 0) { 5747 rc = -EFAULT; 5748 goto out; 5749 } 5750 5751 if (!hdr.PageLength) { 5752 rc = -EFAULT; 5753 goto out; 5754 } 5755 5756 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, 5757 &dma_handle); 5758 5759 if (!buffer) { 5760 rc = -ENOMEM; 5761 goto out; 5762 } 5763 5764 cfg.physAddr = dma_handle; 5765 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5766 cfg.pageAddr = phys_disk_num; 5767 5768 if (mpt_config(ioc, &cfg) != 0) { 5769 rc = -EFAULT; 5770 goto out; 5771 } 5772 5773 rc = 0; 5774 memcpy(phys_disk, buffer, sizeof(*buffer)); 5775 phys_disk->MaxLBA = le32_to_cpu(buffer->MaxLBA); 5776 5777 out: 5778 5779 if (buffer) 5780 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer, 5781 dma_handle); 5782 5783 return rc; 5784 } 5785 5786 /** 5787 * mpt_raid_phys_disk_get_num_paths - returns number paths associated to this phys_num 5788 * @ioc: Pointer to a Adapter Structure 5789 * @phys_disk_num: io unit unique phys disk num generated by the ioc 5790 * 5791 * Return: 5792 * returns number paths 5793 **/ 5794 int 5795 mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER *ioc, u8 phys_disk_num) 5796 { 5797 CONFIGPARMS cfg; 5798 ConfigPageHeader_t hdr; 5799 dma_addr_t dma_handle; 5800 pRaidPhysDiskPage1_t buffer = NULL; 5801 int rc; 5802 5803 memset(&cfg, 0 , sizeof(CONFIGPARMS)); 5804 memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); 5805 5806 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION; 5807 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK; 5808 hdr.PageNumber = 1; 5809 cfg.cfghdr.hdr = &hdr; 5810 cfg.physAddr = -1; 5811 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5812 5813 if (mpt_config(ioc, &cfg) != 0) { 5814 rc = 0; 5815 goto out; 5816 } 5817 5818 if (!hdr.PageLength) { 5819 rc = 0; 5820 goto out; 5821 } 5822 5823 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, 5824 &dma_handle); 5825 5826 if (!buffer) { 5827 rc = 0; 5828 goto out; 5829 } 5830 5831 cfg.physAddr = dma_handle; 5832 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5833 cfg.pageAddr = phys_disk_num; 5834 5835 if (mpt_config(ioc, &cfg) != 0) { 5836 rc = 0; 5837 goto out; 5838 } 5839 5840 rc = buffer->NumPhysDiskPaths; 5841 out: 5842 5843 if (buffer) 5844 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer, 5845 dma_handle); 5846 5847 return rc; 5848 } 5849 EXPORT_SYMBOL(mpt_raid_phys_disk_get_num_paths); 5850 5851 /** 5852 * mpt_raid_phys_disk_pg1 - returns phys disk page 1 5853 * @ioc: Pointer to a Adapter Structure 5854 * @phys_disk_num: io unit unique phys disk num generated by the ioc 5855 * @phys_disk: requested payload data returned 5856 * 5857 * Return: 5858 * 0 on success 5859 * -EFAULT if read of config page header fails or data pointer not NULL 5860 * -ENOMEM if pci_alloc failed 5861 **/ 5862 int 5863 mpt_raid_phys_disk_pg1(MPT_ADAPTER *ioc, u8 phys_disk_num, 5864 RaidPhysDiskPage1_t *phys_disk) 5865 { 5866 CONFIGPARMS cfg; 5867 ConfigPageHeader_t hdr; 5868 dma_addr_t dma_handle; 5869 pRaidPhysDiskPage1_t buffer = NULL; 5870 int rc; 5871 int i; 5872 __le64 sas_address; 5873 5874 memset(&cfg, 0 , sizeof(CONFIGPARMS)); 5875 memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); 5876 rc = 0; 5877 5878 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION; 5879 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK; 5880 hdr.PageNumber = 1; 5881 cfg.cfghdr.hdr = &hdr; 5882 cfg.physAddr = -1; 5883 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5884 5885 if (mpt_config(ioc, &cfg) != 0) { 5886 rc = -EFAULT; 5887 goto out; 5888 } 5889 5890 if (!hdr.PageLength) { 5891 rc = -EFAULT; 5892 goto out; 5893 } 5894 5895 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, 5896 &dma_handle); 5897 5898 if (!buffer) { 5899 rc = -ENOMEM; 5900 goto out; 5901 } 5902 5903 cfg.physAddr = dma_handle; 5904 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5905 cfg.pageAddr = phys_disk_num; 5906 5907 if (mpt_config(ioc, &cfg) != 0) { 5908 rc = -EFAULT; 5909 goto out; 5910 } 5911 5912 phys_disk->NumPhysDiskPaths = buffer->NumPhysDiskPaths; 5913 phys_disk->PhysDiskNum = phys_disk_num; 5914 for (i = 0; i < phys_disk->NumPhysDiskPaths; i++) { 5915 phys_disk->Path[i].PhysDiskID = buffer->Path[i].PhysDiskID; 5916 phys_disk->Path[i].PhysDiskBus = buffer->Path[i].PhysDiskBus; 5917 phys_disk->Path[i].OwnerIdentifier = 5918 buffer->Path[i].OwnerIdentifier; 5919 phys_disk->Path[i].Flags = le16_to_cpu(buffer->Path[i].Flags); 5920 memcpy(&sas_address, &buffer->Path[i].WWID, sizeof(__le64)); 5921 sas_address = le64_to_cpu(sas_address); 5922 memcpy(&phys_disk->Path[i].WWID, &sas_address, sizeof(__le64)); 5923 memcpy(&sas_address, 5924 &buffer->Path[i].OwnerWWID, sizeof(__le64)); 5925 sas_address = le64_to_cpu(sas_address); 5926 memcpy(&phys_disk->Path[i].OwnerWWID, 5927 &sas_address, sizeof(__le64)); 5928 } 5929 5930 out: 5931 5932 if (buffer) 5933 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer, 5934 dma_handle); 5935 5936 return rc; 5937 } 5938 EXPORT_SYMBOL(mpt_raid_phys_disk_pg1); 5939 5940 5941 /** 5942 * mpt_findImVolumes - Identify IDs of hidden disks and RAID Volumes 5943 * @ioc: Pointer to a Adapter Strucutre 5944 * 5945 * Return: 5946 * 0 on success 5947 * -EFAULT if read of config page header fails or data pointer not NULL 5948 * -ENOMEM if pci_alloc failed 5949 **/ 5950 int 5951 mpt_findImVolumes(MPT_ADAPTER *ioc) 5952 { 5953 IOCPage2_t *pIoc2; 5954 u8 *mem; 5955 dma_addr_t ioc2_dma; 5956 CONFIGPARMS cfg; 5957 ConfigPageHeader_t header; 5958 int rc = 0; 5959 int iocpage2sz; 5960 int i; 5961 5962 if (!ioc->ir_firmware) 5963 return 0; 5964 5965 /* Free the old page 5966 */ 5967 kfree(ioc->raid_data.pIocPg2); 5968 ioc->raid_data.pIocPg2 = NULL; 5969 mpt_inactive_raid_list_free(ioc); 5970 5971 /* Read IOCP2 header then the page. 5972 */ 5973 header.PageVersion = 0; 5974 header.PageLength = 0; 5975 header.PageNumber = 2; 5976 header.PageType = MPI_CONFIG_PAGETYPE_IOC; 5977 cfg.cfghdr.hdr = &header; 5978 cfg.physAddr = -1; 5979 cfg.pageAddr = 0; 5980 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5981 cfg.dir = 0; 5982 cfg.timeout = 0; 5983 if (mpt_config(ioc, &cfg) != 0) 5984 return -EFAULT; 5985 5986 if (header.PageLength == 0) 5987 return -EFAULT; 5988 5989 iocpage2sz = header.PageLength * 4; 5990 pIoc2 = pci_alloc_consistent(ioc->pcidev, iocpage2sz, &ioc2_dma); 5991 if (!pIoc2) 5992 return -ENOMEM; 5993 5994 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5995 cfg.physAddr = ioc2_dma; 5996 if (mpt_config(ioc, &cfg) != 0) 5997 goto out; 5998 5999 mem = kmalloc(iocpage2sz, GFP_KERNEL); 6000 if (!mem) { 6001 rc = -ENOMEM; 6002 goto out; 6003 } 6004 6005 memcpy(mem, (u8 *)pIoc2, iocpage2sz); 6006 ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem; 6007 6008 mpt_read_ioc_pg_3(ioc); 6009 6010 for (i = 0; i < pIoc2->NumActiveVolumes ; i++) 6011 mpt_inactive_raid_volumes(ioc, 6012 pIoc2->RaidVolume[i].VolumeBus, 6013 pIoc2->RaidVolume[i].VolumeID); 6014 6015 out: 6016 pci_free_consistent(ioc->pcidev, iocpage2sz, pIoc2, ioc2_dma); 6017 6018 return rc; 6019 } 6020 6021 static int 6022 mpt_read_ioc_pg_3(MPT_ADAPTER *ioc) 6023 { 6024 IOCPage3_t *pIoc3; 6025 u8 *mem; 6026 CONFIGPARMS cfg; 6027 ConfigPageHeader_t header; 6028 dma_addr_t ioc3_dma; 6029 int iocpage3sz = 0; 6030 6031 /* Free the old page 6032 */ 6033 kfree(ioc->raid_data.pIocPg3); 6034 ioc->raid_data.pIocPg3 = NULL; 6035 6036 /* There is at least one physical disk. 6037 * Read and save IOC Page 3 6038 */ 6039 header.PageVersion = 0; 6040 header.PageLength = 0; 6041 header.PageNumber = 3; 6042 header.PageType = MPI_CONFIG_PAGETYPE_IOC; 6043 cfg.cfghdr.hdr = &header; 6044 cfg.physAddr = -1; 6045 cfg.pageAddr = 0; 6046 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 6047 cfg.dir = 0; 6048 cfg.timeout = 0; 6049 if (mpt_config(ioc, &cfg) != 0) 6050 return 0; 6051 6052 if (header.PageLength == 0) 6053 return 0; 6054 6055 /* Read Header good, alloc memory 6056 */ 6057 iocpage3sz = header.PageLength * 4; 6058 pIoc3 = pci_alloc_consistent(ioc->pcidev, iocpage3sz, &ioc3_dma); 6059 if (!pIoc3) 6060 return 0; 6061 6062 /* Read the Page and save the data 6063 * into malloc'd memory. 6064 */ 6065 cfg.physAddr = ioc3_dma; 6066 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 6067 if (mpt_config(ioc, &cfg) == 0) { 6068 mem = kmalloc(iocpage3sz, GFP_KERNEL); 6069 if (mem) { 6070 memcpy(mem, (u8 *)pIoc3, iocpage3sz); 6071 ioc->raid_data.pIocPg3 = (IOCPage3_t *) mem; 6072 } 6073 } 6074 6075 pci_free_consistent(ioc->pcidev, iocpage3sz, pIoc3, ioc3_dma); 6076 6077 return 0; 6078 } 6079 6080 static void 6081 mpt_read_ioc_pg_4(MPT_ADAPTER *ioc) 6082 { 6083 IOCPage4_t *pIoc4; 6084 CONFIGPARMS cfg; 6085 ConfigPageHeader_t header; 6086 dma_addr_t ioc4_dma; 6087 int iocpage4sz; 6088 6089 /* Read and save IOC Page 4 6090 */ 6091 header.PageVersion = 0; 6092 header.PageLength = 0; 6093 header.PageNumber = 4; 6094 header.PageType = MPI_CONFIG_PAGETYPE_IOC; 6095 cfg.cfghdr.hdr = &header; 6096 cfg.physAddr = -1; 6097 cfg.pageAddr = 0; 6098 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 6099 cfg.dir = 0; 6100 cfg.timeout = 0; 6101 if (mpt_config(ioc, &cfg) != 0) 6102 return; 6103 6104 if (header.PageLength == 0) 6105 return; 6106 6107 if ( (pIoc4 = ioc->spi_data.pIocPg4) == NULL ) { 6108 iocpage4sz = (header.PageLength + 4) * 4; /* Allow 4 additional SEP's */ 6109 pIoc4 = pci_alloc_consistent(ioc->pcidev, iocpage4sz, &ioc4_dma); 6110 if (!pIoc4) 6111 return; 6112 ioc->alloc_total += iocpage4sz; 6113 } else { 6114 ioc4_dma = ioc->spi_data.IocPg4_dma; 6115 iocpage4sz = ioc->spi_data.IocPg4Sz; 6116 } 6117 6118 /* Read the Page into dma memory. 6119 */ 6120 cfg.physAddr = ioc4_dma; 6121 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 6122 if (mpt_config(ioc, &cfg) == 0) { 6123 ioc->spi_data.pIocPg4 = (IOCPage4_t *) pIoc4; 6124 ioc->spi_data.IocPg4_dma = ioc4_dma; 6125 ioc->spi_data.IocPg4Sz = iocpage4sz; 6126 } else { 6127 pci_free_consistent(ioc->pcidev, iocpage4sz, pIoc4, ioc4_dma); 6128 ioc->spi_data.pIocPg4 = NULL; 6129 ioc->alloc_total -= iocpage4sz; 6130 } 6131 } 6132 6133 static void 6134 mpt_read_ioc_pg_1(MPT_ADAPTER *ioc) 6135 { 6136 IOCPage1_t *pIoc1; 6137 CONFIGPARMS cfg; 6138 ConfigPageHeader_t header; 6139 dma_addr_t ioc1_dma; 6140 int iocpage1sz = 0; 6141 u32 tmp; 6142 6143 /* Check the Coalescing Timeout in IOC Page 1 6144 */ 6145 header.PageVersion = 0; 6146 header.PageLength = 0; 6147 header.PageNumber = 1; 6148 header.PageType = MPI_CONFIG_PAGETYPE_IOC; 6149 cfg.cfghdr.hdr = &header; 6150 cfg.physAddr = -1; 6151 cfg.pageAddr = 0; 6152 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 6153 cfg.dir = 0; 6154 cfg.timeout = 0; 6155 if (mpt_config(ioc, &cfg) != 0) 6156 return; 6157 6158 if (header.PageLength == 0) 6159 return; 6160 6161 /* Read Header good, alloc memory 6162 */ 6163 iocpage1sz = header.PageLength * 4; 6164 pIoc1 = pci_alloc_consistent(ioc->pcidev, iocpage1sz, &ioc1_dma); 6165 if (!pIoc1) 6166 return; 6167 6168 /* Read the Page and check coalescing timeout 6169 */ 6170 cfg.physAddr = ioc1_dma; 6171 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 6172 if (mpt_config(ioc, &cfg) == 0) { 6173 6174 tmp = le32_to_cpu(pIoc1->Flags) & MPI_IOCPAGE1_REPLY_COALESCING; 6175 if (tmp == MPI_IOCPAGE1_REPLY_COALESCING) { 6176 tmp = le32_to_cpu(pIoc1->CoalescingTimeout); 6177 6178 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Coalescing Enabled Timeout = %d\n", 6179 ioc->name, tmp)); 6180 6181 if (tmp > MPT_COALESCING_TIMEOUT) { 6182 pIoc1->CoalescingTimeout = cpu_to_le32(MPT_COALESCING_TIMEOUT); 6183 6184 /* Write NVRAM and current 6185 */ 6186 cfg.dir = 1; 6187 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT; 6188 if (mpt_config(ioc, &cfg) == 0) { 6189 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Reset Current Coalescing Timeout to = %d\n", 6190 ioc->name, MPT_COALESCING_TIMEOUT)); 6191 6192 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM; 6193 if (mpt_config(ioc, &cfg) == 0) { 6194 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6195 "Reset NVRAM Coalescing Timeout to = %d\n", 6196 ioc->name, MPT_COALESCING_TIMEOUT)); 6197 } else { 6198 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6199 "Reset NVRAM Coalescing Timeout Failed\n", 6200 ioc->name)); 6201 } 6202 6203 } else { 6204 dprintk(ioc, printk(MYIOC_s_WARN_FMT 6205 "Reset of Current Coalescing Timeout Failed!\n", 6206 ioc->name)); 6207 } 6208 } 6209 6210 } else { 6211 dprintk(ioc, printk(MYIOC_s_WARN_FMT "Coalescing Disabled\n", ioc->name)); 6212 } 6213 } 6214 6215 pci_free_consistent(ioc->pcidev, iocpage1sz, pIoc1, ioc1_dma); 6216 6217 return; 6218 } 6219 6220 static void 6221 mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc) 6222 { 6223 CONFIGPARMS cfg; 6224 ConfigPageHeader_t hdr; 6225 dma_addr_t buf_dma; 6226 ManufacturingPage0_t *pbuf = NULL; 6227 6228 memset(&cfg, 0 , sizeof(CONFIGPARMS)); 6229 memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); 6230 6231 hdr.PageType = MPI_CONFIG_PAGETYPE_MANUFACTURING; 6232 cfg.cfghdr.hdr = &hdr; 6233 cfg.physAddr = -1; 6234 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 6235 cfg.timeout = 10; 6236 6237 if (mpt_config(ioc, &cfg) != 0) 6238 goto out; 6239 6240 if (!cfg.cfghdr.hdr->PageLength) 6241 goto out; 6242 6243 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 6244 pbuf = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, &buf_dma); 6245 if (!pbuf) 6246 goto out; 6247 6248 cfg.physAddr = buf_dma; 6249 6250 if (mpt_config(ioc, &cfg) != 0) 6251 goto out; 6252 6253 memcpy(ioc->board_name, pbuf->BoardName, sizeof(ioc->board_name)); 6254 memcpy(ioc->board_assembly, pbuf->BoardAssembly, sizeof(ioc->board_assembly)); 6255 memcpy(ioc->board_tracer, pbuf->BoardTracerNumber, sizeof(ioc->board_tracer)); 6256 6257 out: 6258 6259 if (pbuf) 6260 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, pbuf, buf_dma); 6261 } 6262 6263 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6264 /** 6265 * SendEventNotification - Send EventNotification (on or off) request to adapter 6266 * @ioc: Pointer to MPT_ADAPTER structure 6267 * @EvSwitch: Event switch flags 6268 * @sleepFlag: Specifies whether the process can sleep 6269 */ 6270 static int 6271 SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch, int sleepFlag) 6272 { 6273 EventNotification_t evn; 6274 MPIDefaultReply_t reply_buf; 6275 6276 memset(&evn, 0, sizeof(EventNotification_t)); 6277 memset(&reply_buf, 0, sizeof(MPIDefaultReply_t)); 6278 6279 evn.Function = MPI_FUNCTION_EVENT_NOTIFICATION; 6280 evn.Switch = EvSwitch; 6281 evn.MsgContext = cpu_to_le32(mpt_base_index << 16); 6282 6283 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6284 "Sending EventNotification (%d) request %p\n", 6285 ioc->name, EvSwitch, &evn)); 6286 6287 return mpt_handshake_req_reply_wait(ioc, sizeof(EventNotification_t), 6288 (u32 *)&evn, sizeof(MPIDefaultReply_t), (u16 *)&reply_buf, 30, 6289 sleepFlag); 6290 } 6291 6292 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6293 /** 6294 * SendEventAck - Send EventAck request to MPT adapter. 6295 * @ioc: Pointer to MPT_ADAPTER structure 6296 * @evnp: Pointer to original EventNotification request 6297 */ 6298 static int 6299 SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp) 6300 { 6301 EventAck_t *pAck; 6302 6303 if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) { 6304 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n", 6305 ioc->name, __func__)); 6306 return -1; 6307 } 6308 6309 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending EventAck\n", ioc->name)); 6310 6311 pAck->Function = MPI_FUNCTION_EVENT_ACK; 6312 pAck->ChainOffset = 0; 6313 pAck->Reserved[0] = pAck->Reserved[1] = 0; 6314 pAck->MsgFlags = 0; 6315 pAck->Reserved1[0] = pAck->Reserved1[1] = pAck->Reserved1[2] = 0; 6316 pAck->Event = evnp->Event; 6317 pAck->EventContext = evnp->EventContext; 6318 6319 mpt_put_msg_frame(mpt_base_index, ioc, (MPT_FRAME_HDR *)pAck); 6320 6321 return 0; 6322 } 6323 6324 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6325 /** 6326 * mpt_config - Generic function to issue config message 6327 * @ioc: Pointer to an adapter structure 6328 * @pCfg: Pointer to a configuration structure. Struct contains 6329 * action, page address, direction, physical address 6330 * and pointer to a configuration page header 6331 * Page header is updated. 6332 * 6333 * Returns 0 for success 6334 * -EPERM if not allowed due to ISR context 6335 * -EAGAIN if no msg frames currently available 6336 * -EFAULT for non-successful reply or no reply (timeout) 6337 */ 6338 int 6339 mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg) 6340 { 6341 Config_t *pReq; 6342 ConfigReply_t *pReply; 6343 ConfigExtendedPageHeader_t *pExtHdr = NULL; 6344 MPT_FRAME_HDR *mf; 6345 int ii; 6346 int flagsLength; 6347 long timeout; 6348 int ret; 6349 u8 page_type = 0, extend_page; 6350 unsigned long timeleft; 6351 unsigned long flags; 6352 int in_isr; 6353 u8 issue_hard_reset = 0; 6354 u8 retry_count = 0; 6355 6356 /* Prevent calling wait_event() (below), if caller happens 6357 * to be in ISR context, because that is fatal! 6358 */ 6359 in_isr = in_interrupt(); 6360 if (in_isr) { 6361 dcprintk(ioc, printk(MYIOC_s_WARN_FMT "Config request not allowed in ISR context!\n", 6362 ioc->name)); 6363 return -EPERM; 6364 } 6365 6366 /* don't send a config page during diag reset */ 6367 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 6368 if (ioc->ioc_reset_in_progress) { 6369 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6370 "%s: busy with host reset\n", ioc->name, __func__)); 6371 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 6372 return -EBUSY; 6373 } 6374 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 6375 6376 /* don't send if no chance of success */ 6377 if (!ioc->active || 6378 mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_OPERATIONAL) { 6379 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6380 "%s: ioc not operational, %d, %xh\n", 6381 ioc->name, __func__, ioc->active, 6382 mpt_GetIocState(ioc, 0))); 6383 return -EFAULT; 6384 } 6385 6386 retry_config: 6387 mutex_lock(&ioc->mptbase_cmds.mutex); 6388 /* init the internal cmd struct */ 6389 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE); 6390 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status) 6391 6392 /* Get and Populate a free Frame 6393 */ 6394 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) { 6395 dcprintk(ioc, printk(MYIOC_s_WARN_FMT 6396 "mpt_config: no msg frames!\n", ioc->name)); 6397 ret = -EAGAIN; 6398 goto out; 6399 } 6400 6401 pReq = (Config_t *)mf; 6402 pReq->Action = pCfg->action; 6403 pReq->Reserved = 0; 6404 pReq->ChainOffset = 0; 6405 pReq->Function = MPI_FUNCTION_CONFIG; 6406 6407 /* Assume page type is not extended and clear "reserved" fields. */ 6408 pReq->ExtPageLength = 0; 6409 pReq->ExtPageType = 0; 6410 pReq->MsgFlags = 0; 6411 6412 for (ii=0; ii < 8; ii++) 6413 pReq->Reserved2[ii] = 0; 6414 6415 pReq->Header.PageVersion = pCfg->cfghdr.hdr->PageVersion; 6416 pReq->Header.PageLength = pCfg->cfghdr.hdr->PageLength; 6417 pReq->Header.PageNumber = pCfg->cfghdr.hdr->PageNumber; 6418 pReq->Header.PageType = (pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK); 6419 6420 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == MPI_CONFIG_PAGETYPE_EXTENDED) { 6421 pExtHdr = (ConfigExtendedPageHeader_t *)pCfg->cfghdr.ehdr; 6422 pReq->ExtPageLength = cpu_to_le16(pExtHdr->ExtPageLength); 6423 pReq->ExtPageType = pExtHdr->ExtPageType; 6424 pReq->Header.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; 6425 6426 /* Page Length must be treated as a reserved field for the 6427 * extended header. 6428 */ 6429 pReq->Header.PageLength = 0; 6430 } 6431 6432 pReq->PageAddress = cpu_to_le32(pCfg->pageAddr); 6433 6434 /* Add a SGE to the config request. 6435 */ 6436 if (pCfg->dir) 6437 flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE; 6438 else 6439 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ; 6440 6441 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == 6442 MPI_CONFIG_PAGETYPE_EXTENDED) { 6443 flagsLength |= pExtHdr->ExtPageLength * 4; 6444 page_type = pReq->ExtPageType; 6445 extend_page = 1; 6446 } else { 6447 flagsLength |= pCfg->cfghdr.hdr->PageLength * 4; 6448 page_type = pReq->Header.PageType; 6449 extend_page = 0; 6450 } 6451 6452 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6453 "Sending Config request type 0x%x, page 0x%x and action %d\n", 6454 ioc->name, page_type, pReq->Header.PageNumber, pReq->Action)); 6455 6456 ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr); 6457 timeout = (pCfg->timeout < 15) ? HZ*15 : HZ*pCfg->timeout; 6458 mpt_put_msg_frame(mpt_base_index, ioc, mf); 6459 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done, 6460 timeout); 6461 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { 6462 ret = -ETIME; 6463 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6464 "Failed Sending Config request type 0x%x, page 0x%x," 6465 " action %d, status %xh, time left %ld\n\n", 6466 ioc->name, page_type, pReq->Header.PageNumber, 6467 pReq->Action, ioc->mptbase_cmds.status, timeleft)); 6468 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) 6469 goto out; 6470 if (!timeleft) { 6471 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 6472 if (ioc->ioc_reset_in_progress) { 6473 spin_unlock_irqrestore(&ioc->taskmgmt_lock, 6474 flags); 6475 printk(MYIOC_s_INFO_FMT "%s: host reset in" 6476 " progress mpt_config timed out.!!\n", 6477 __func__, ioc->name); 6478 mutex_unlock(&ioc->mptbase_cmds.mutex); 6479 return -EFAULT; 6480 } 6481 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 6482 issue_hard_reset = 1; 6483 } 6484 goto out; 6485 } 6486 6487 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) { 6488 ret = -1; 6489 goto out; 6490 } 6491 pReply = (ConfigReply_t *)ioc->mptbase_cmds.reply; 6492 ret = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK; 6493 if (ret == MPI_IOCSTATUS_SUCCESS) { 6494 if (extend_page) { 6495 pCfg->cfghdr.ehdr->ExtPageLength = 6496 le16_to_cpu(pReply->ExtPageLength); 6497 pCfg->cfghdr.ehdr->ExtPageType = 6498 pReply->ExtPageType; 6499 } 6500 pCfg->cfghdr.hdr->PageVersion = pReply->Header.PageVersion; 6501 pCfg->cfghdr.hdr->PageLength = pReply->Header.PageLength; 6502 pCfg->cfghdr.hdr->PageNumber = pReply->Header.PageNumber; 6503 pCfg->cfghdr.hdr->PageType = pReply->Header.PageType; 6504 6505 } 6506 6507 if (retry_count) 6508 printk(MYIOC_s_INFO_FMT "Retry completed " 6509 "ret=0x%x timeleft=%ld\n", 6510 ioc->name, ret, timeleft); 6511 6512 dcprintk(ioc, printk(KERN_DEBUG "IOCStatus=%04xh, IOCLogInfo=%08xh\n", 6513 ret, le32_to_cpu(pReply->IOCLogInfo))); 6514 6515 out: 6516 6517 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status) 6518 mutex_unlock(&ioc->mptbase_cmds.mutex); 6519 if (issue_hard_reset) { 6520 issue_hard_reset = 0; 6521 printk(MYIOC_s_WARN_FMT 6522 "Issuing Reset from %s!!, doorbell=0x%08x\n", 6523 ioc->name, __func__, mpt_GetIocState(ioc, 0)); 6524 if (retry_count == 0) { 6525 if (mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP) != 0) 6526 retry_count++; 6527 } else 6528 mpt_HardResetHandler(ioc, CAN_SLEEP); 6529 6530 mpt_free_msg_frame(ioc, mf); 6531 /* attempt one retry for a timed out command */ 6532 if (retry_count < 2) { 6533 printk(MYIOC_s_INFO_FMT 6534 "Attempting Retry Config request" 6535 " type 0x%x, page 0x%x," 6536 " action %d\n", ioc->name, page_type, 6537 pCfg->cfghdr.hdr->PageNumber, pCfg->action); 6538 retry_count++; 6539 goto retry_config; 6540 } 6541 } 6542 return ret; 6543 6544 } 6545 6546 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6547 /** 6548 * mpt_ioc_reset - Base cleanup for hard reset 6549 * @ioc: Pointer to the adapter structure 6550 * @reset_phase: Indicates pre- or post-reset functionality 6551 * 6552 * Remark: Frees resources with internally generated commands. 6553 */ 6554 static int 6555 mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) 6556 { 6557 switch (reset_phase) { 6558 case MPT_IOC_SETUP_RESET: 6559 ioc->taskmgmt_quiesce_io = 1; 6560 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6561 "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__)); 6562 break; 6563 case MPT_IOC_PRE_RESET: 6564 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6565 "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__)); 6566 break; 6567 case MPT_IOC_POST_RESET: 6568 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6569 "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__)); 6570 /* wake up mptbase_cmds */ 6571 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) { 6572 ioc->mptbase_cmds.status |= 6573 MPT_MGMT_STATUS_DID_IOCRESET; 6574 complete(&ioc->mptbase_cmds.done); 6575 } 6576 /* wake up taskmgmt_cmds */ 6577 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) { 6578 ioc->taskmgmt_cmds.status |= 6579 MPT_MGMT_STATUS_DID_IOCRESET; 6580 complete(&ioc->taskmgmt_cmds.done); 6581 } 6582 break; 6583 default: 6584 break; 6585 } 6586 6587 return 1; /* currently means nothing really */ 6588 } 6589 6590 6591 #ifdef CONFIG_PROC_FS /* { */ 6592 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6593 /* 6594 * procfs (%MPT_PROCFS_MPTBASEDIR/...) support stuff... 6595 */ 6596 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6597 /** 6598 * procmpt_create - Create %MPT_PROCFS_MPTBASEDIR entries. 6599 * 6600 * Returns 0 for success, non-zero for failure. 6601 */ 6602 static int 6603 procmpt_create(void) 6604 { 6605 mpt_proc_root_dir = proc_mkdir(MPT_PROCFS_MPTBASEDIR, NULL); 6606 if (mpt_proc_root_dir == NULL) 6607 return -ENOTDIR; 6608 6609 proc_create("summary", S_IRUGO, mpt_proc_root_dir, &mpt_summary_proc_fops); 6610 proc_create("version", S_IRUGO, mpt_proc_root_dir, &mpt_version_proc_fops); 6611 return 0; 6612 } 6613 6614 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6615 /** 6616 * procmpt_destroy - Tear down %MPT_PROCFS_MPTBASEDIR entries. 6617 * 6618 * Returns 0 for success, non-zero for failure. 6619 */ 6620 static void 6621 procmpt_destroy(void) 6622 { 6623 remove_proc_entry("version", mpt_proc_root_dir); 6624 remove_proc_entry("summary", mpt_proc_root_dir); 6625 remove_proc_entry(MPT_PROCFS_MPTBASEDIR, NULL); 6626 } 6627 6628 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6629 /* 6630 * Handles read request from /proc/mpt/summary or /proc/mpt/iocN/summary. 6631 */ 6632 static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan); 6633 6634 static int mpt_summary_proc_show(struct seq_file *m, void *v) 6635 { 6636 MPT_ADAPTER *ioc = m->private; 6637 6638 if (ioc) { 6639 seq_mpt_print_ioc_summary(ioc, m, 1); 6640 } else { 6641 list_for_each_entry(ioc, &ioc_list, list) { 6642 seq_mpt_print_ioc_summary(ioc, m, 1); 6643 } 6644 } 6645 6646 return 0; 6647 } 6648 6649 static int mpt_summary_proc_open(struct inode *inode, struct file *file) 6650 { 6651 return single_open(file, mpt_summary_proc_show, PDE_DATA(inode)); 6652 } 6653 6654 static const struct file_operations mpt_summary_proc_fops = { 6655 .owner = THIS_MODULE, 6656 .open = mpt_summary_proc_open, 6657 .read = seq_read, 6658 .llseek = seq_lseek, 6659 .release = single_release, 6660 }; 6661 6662 static int mpt_version_proc_show(struct seq_file *m, void *v) 6663 { 6664 u8 cb_idx; 6665 int scsi, fc, sas, lan, ctl, targ, dmp; 6666 char *drvname; 6667 6668 seq_printf(m, "%s-%s\n", "mptlinux", MPT_LINUX_VERSION_COMMON); 6669 seq_printf(m, " Fusion MPT base driver\n"); 6670 6671 scsi = fc = sas = lan = ctl = targ = dmp = 0; 6672 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 6673 drvname = NULL; 6674 if (MptCallbacks[cb_idx]) { 6675 switch (MptDriverClass[cb_idx]) { 6676 case MPTSPI_DRIVER: 6677 if (!scsi++) drvname = "SPI host"; 6678 break; 6679 case MPTFC_DRIVER: 6680 if (!fc++) drvname = "FC host"; 6681 break; 6682 case MPTSAS_DRIVER: 6683 if (!sas++) drvname = "SAS host"; 6684 break; 6685 case MPTLAN_DRIVER: 6686 if (!lan++) drvname = "LAN"; 6687 break; 6688 case MPTSTM_DRIVER: 6689 if (!targ++) drvname = "SCSI target"; 6690 break; 6691 case MPTCTL_DRIVER: 6692 if (!ctl++) drvname = "ioctl"; 6693 break; 6694 } 6695 6696 if (drvname) 6697 seq_printf(m, " Fusion MPT %s driver\n", drvname); 6698 } 6699 } 6700 6701 return 0; 6702 } 6703 6704 static int mpt_version_proc_open(struct inode *inode, struct file *file) 6705 { 6706 return single_open(file, mpt_version_proc_show, NULL); 6707 } 6708 6709 static const struct file_operations mpt_version_proc_fops = { 6710 .owner = THIS_MODULE, 6711 .open = mpt_version_proc_open, 6712 .read = seq_read, 6713 .llseek = seq_lseek, 6714 .release = single_release, 6715 }; 6716 6717 static int mpt_iocinfo_proc_show(struct seq_file *m, void *v) 6718 { 6719 MPT_ADAPTER *ioc = m->private; 6720 char expVer[32]; 6721 int sz; 6722 int p; 6723 6724 mpt_get_fw_exp_ver(expVer, ioc); 6725 6726 seq_printf(m, "%s:", ioc->name); 6727 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT) 6728 seq_printf(m, " (f/w download boot flag set)"); 6729 // if (ioc->facts.IOCExceptions & MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL) 6730 // seq_printf(m, " CONFIG_CHECKSUM_FAIL!"); 6731 6732 seq_printf(m, "\n ProductID = 0x%04x (%s)\n", 6733 ioc->facts.ProductID, 6734 ioc->prod_name); 6735 seq_printf(m, " FWVersion = 0x%08x%s", ioc->facts.FWVersion.Word, expVer); 6736 if (ioc->facts.FWImageSize) 6737 seq_printf(m, " (fw_size=%d)", ioc->facts.FWImageSize); 6738 seq_printf(m, "\n MsgVersion = 0x%04x\n", ioc->facts.MsgVersion); 6739 seq_printf(m, " FirstWhoInit = 0x%02x\n", ioc->FirstWhoInit); 6740 seq_printf(m, " EventState = 0x%02x\n", ioc->facts.EventState); 6741 6742 seq_printf(m, " CurrentHostMfaHighAddr = 0x%08x\n", 6743 ioc->facts.CurrentHostMfaHighAddr); 6744 seq_printf(m, " CurrentSenseBufferHighAddr = 0x%08x\n", 6745 ioc->facts.CurrentSenseBufferHighAddr); 6746 6747 seq_printf(m, " MaxChainDepth = 0x%02x frames\n", ioc->facts.MaxChainDepth); 6748 seq_printf(m, " MinBlockSize = 0x%02x bytes\n", 4*ioc->facts.BlockSize); 6749 6750 seq_printf(m, " RequestFrames @ 0x%p (Dma @ 0x%p)\n", 6751 (void *)ioc->req_frames, (void *)(ulong)ioc->req_frames_dma); 6752 /* 6753 * Rounding UP to nearest 4-kB boundary here... 6754 */ 6755 sz = (ioc->req_sz * ioc->req_depth) + 128; 6756 sz = ((sz + 0x1000UL - 1UL) / 0x1000) * 0x1000; 6757 seq_printf(m, " {CurReqSz=%d} x {CurReqDepth=%d} = %d bytes ^= 0x%x\n", 6758 ioc->req_sz, ioc->req_depth, ioc->req_sz*ioc->req_depth, sz); 6759 seq_printf(m, " {MaxReqSz=%d} {MaxReqDepth=%d}\n", 6760 4*ioc->facts.RequestFrameSize, 6761 ioc->facts.GlobalCredits); 6762 6763 seq_printf(m, " Frames @ 0x%p (Dma @ 0x%p)\n", 6764 (void *)ioc->alloc, (void *)(ulong)ioc->alloc_dma); 6765 sz = (ioc->reply_sz * ioc->reply_depth) + 128; 6766 seq_printf(m, " {CurRepSz=%d} x {CurRepDepth=%d} = %d bytes ^= 0x%x\n", 6767 ioc->reply_sz, ioc->reply_depth, ioc->reply_sz*ioc->reply_depth, sz); 6768 seq_printf(m, " {MaxRepSz=%d} {MaxRepDepth=%d}\n", 6769 ioc->facts.CurReplyFrameSize, 6770 ioc->facts.ReplyQueueDepth); 6771 6772 seq_printf(m, " MaxDevices = %d\n", 6773 (ioc->facts.MaxDevices==0) ? 255 : ioc->facts.MaxDevices); 6774 seq_printf(m, " MaxBuses = %d\n", ioc->facts.MaxBuses); 6775 6776 /* per-port info */ 6777 for (p=0; p < ioc->facts.NumberOfPorts; p++) { 6778 seq_printf(m, " PortNumber = %d (of %d)\n", 6779 p+1, 6780 ioc->facts.NumberOfPorts); 6781 if (ioc->bus_type == FC) { 6782 if (ioc->pfacts[p].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) { 6783 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow; 6784 seq_printf(m, " LanAddr = %pMR\n", a); 6785 } 6786 seq_printf(m, " WWN = %08X%08X:%08X%08X\n", 6787 ioc->fc_port_page0[p].WWNN.High, 6788 ioc->fc_port_page0[p].WWNN.Low, 6789 ioc->fc_port_page0[p].WWPN.High, 6790 ioc->fc_port_page0[p].WWPN.Low); 6791 } 6792 } 6793 6794 return 0; 6795 } 6796 6797 static int mpt_iocinfo_proc_open(struct inode *inode, struct file *file) 6798 { 6799 return single_open(file, mpt_iocinfo_proc_show, PDE_DATA(inode)); 6800 } 6801 6802 static const struct file_operations mpt_iocinfo_proc_fops = { 6803 .owner = THIS_MODULE, 6804 .open = mpt_iocinfo_proc_open, 6805 .read = seq_read, 6806 .llseek = seq_lseek, 6807 .release = single_release, 6808 }; 6809 #endif /* CONFIG_PROC_FS } */ 6810 6811 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6812 static void 6813 mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc) 6814 { 6815 buf[0] ='\0'; 6816 if ((ioc->facts.FWVersion.Word >> 24) == 0x0E) { 6817 sprintf(buf, " (Exp %02d%02d)", 6818 (ioc->facts.FWVersion.Word >> 16) & 0x00FF, /* Month */ 6819 (ioc->facts.FWVersion.Word >> 8) & 0x1F); /* Day */ 6820 6821 /* insider hack! */ 6822 if ((ioc->facts.FWVersion.Word >> 8) & 0x80) 6823 strcat(buf, " [MDBG]"); 6824 } 6825 } 6826 6827 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6828 /** 6829 * mpt_print_ioc_summary - Write ASCII summary of IOC to a buffer. 6830 * @ioc: Pointer to MPT_ADAPTER structure 6831 * @buffer: Pointer to buffer where IOC summary info should be written 6832 * @size: Pointer to number of bytes we wrote (set by this routine) 6833 * @len: Offset at which to start writing in buffer 6834 * @showlan: Display LAN stuff? 6835 * 6836 * This routine writes (english readable) ASCII text, which represents 6837 * a summary of IOC information, to a buffer. 6838 */ 6839 void 6840 mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int showlan) 6841 { 6842 char expVer[32]; 6843 int y; 6844 6845 mpt_get_fw_exp_ver(expVer, ioc); 6846 6847 /* 6848 * Shorter summary of attached ioc's... 6849 */ 6850 y = sprintf(buffer+len, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d", 6851 ioc->name, 6852 ioc->prod_name, 6853 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */ 6854 ioc->facts.FWVersion.Word, 6855 expVer, 6856 ioc->facts.NumberOfPorts, 6857 ioc->req_depth); 6858 6859 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) { 6860 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow; 6861 y += sprintf(buffer+len+y, ", LanAddr=%pMR", a); 6862 } 6863 6864 y += sprintf(buffer+len+y, ", IRQ=%d", ioc->pci_irq); 6865 6866 if (!ioc->active) 6867 y += sprintf(buffer+len+y, " (disabled)"); 6868 6869 y += sprintf(buffer+len+y, "\n"); 6870 6871 *size = y; 6872 } 6873 6874 #ifdef CONFIG_PROC_FS 6875 static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan) 6876 { 6877 char expVer[32]; 6878 6879 mpt_get_fw_exp_ver(expVer, ioc); 6880 6881 /* 6882 * Shorter summary of attached ioc's... 6883 */ 6884 seq_printf(m, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d", 6885 ioc->name, 6886 ioc->prod_name, 6887 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */ 6888 ioc->facts.FWVersion.Word, 6889 expVer, 6890 ioc->facts.NumberOfPorts, 6891 ioc->req_depth); 6892 6893 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) { 6894 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow; 6895 seq_printf(m, ", LanAddr=%pMR", a); 6896 } 6897 6898 seq_printf(m, ", IRQ=%d", ioc->pci_irq); 6899 6900 if (!ioc->active) 6901 seq_printf(m, " (disabled)"); 6902 6903 seq_putc(m, '\n'); 6904 } 6905 #endif 6906 6907 /** 6908 * mpt_set_taskmgmt_in_progress_flag - set flags associated with task management 6909 * @ioc: Pointer to MPT_ADAPTER structure 6910 * 6911 * Returns 0 for SUCCESS or -1 if FAILED. 6912 * 6913 * If -1 is return, then it was not possible to set the flags 6914 **/ 6915 int 6916 mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc) 6917 { 6918 unsigned long flags; 6919 int retval; 6920 6921 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 6922 if (ioc->ioc_reset_in_progress || ioc->taskmgmt_in_progress || 6923 (ioc->alt_ioc && ioc->alt_ioc->taskmgmt_in_progress)) { 6924 retval = -1; 6925 goto out; 6926 } 6927 retval = 0; 6928 ioc->taskmgmt_in_progress = 1; 6929 ioc->taskmgmt_quiesce_io = 1; 6930 if (ioc->alt_ioc) { 6931 ioc->alt_ioc->taskmgmt_in_progress = 1; 6932 ioc->alt_ioc->taskmgmt_quiesce_io = 1; 6933 } 6934 out: 6935 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 6936 return retval; 6937 } 6938 EXPORT_SYMBOL(mpt_set_taskmgmt_in_progress_flag); 6939 6940 /** 6941 * mpt_clear_taskmgmt_in_progress_flag - clear flags associated with task management 6942 * @ioc: Pointer to MPT_ADAPTER structure 6943 * 6944 **/ 6945 void 6946 mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc) 6947 { 6948 unsigned long flags; 6949 6950 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 6951 ioc->taskmgmt_in_progress = 0; 6952 ioc->taskmgmt_quiesce_io = 0; 6953 if (ioc->alt_ioc) { 6954 ioc->alt_ioc->taskmgmt_in_progress = 0; 6955 ioc->alt_ioc->taskmgmt_quiesce_io = 0; 6956 } 6957 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 6958 } 6959 EXPORT_SYMBOL(mpt_clear_taskmgmt_in_progress_flag); 6960 6961 6962 /** 6963 * mpt_halt_firmware - Halts the firmware if it is operational and panic 6964 * the kernel 6965 * @ioc: Pointer to MPT_ADAPTER structure 6966 * 6967 **/ 6968 void 6969 mpt_halt_firmware(MPT_ADAPTER *ioc) 6970 { 6971 u32 ioc_raw_state; 6972 6973 ioc_raw_state = mpt_GetIocState(ioc, 0); 6974 6975 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) { 6976 printk(MYIOC_s_ERR_FMT "IOC is in FAULT state (%04xh)!!!\n", 6977 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK); 6978 panic("%s: IOC Fault (%04xh)!!!\n", ioc->name, 6979 ioc_raw_state & MPI_DOORBELL_DATA_MASK); 6980 } else { 6981 CHIPREG_WRITE32(&ioc->chip->Doorbell, 0xC0FFEE00); 6982 panic("%s: Firmware is halted due to command timeout\n", 6983 ioc->name); 6984 } 6985 } 6986 EXPORT_SYMBOL(mpt_halt_firmware); 6987 6988 /** 6989 * mpt_SoftResetHandler - Issues a less expensive reset 6990 * @ioc: Pointer to MPT_ADAPTER structure 6991 * @sleepFlag: Indicates if sleep or schedule must be called. 6992 * 6993 * Returns 0 for SUCCESS or -1 if FAILED. 6994 * 6995 * Message Unit Reset - instructs the IOC to reset the Reply Post and 6996 * Free FIFO's. All the Message Frames on Reply Free FIFO are discarded. 6997 * All posted buffers are freed, and event notification is turned off. 6998 * IOC doesn't reply to any outstanding request. This will transfer IOC 6999 * to READY state. 7000 **/ 7001 static int 7002 mpt_SoftResetHandler(MPT_ADAPTER *ioc, int sleepFlag) 7003 { 7004 int rc; 7005 int ii; 7006 u8 cb_idx; 7007 unsigned long flags; 7008 u32 ioc_state; 7009 unsigned long time_count; 7010 7011 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SoftResetHandler Entered!\n", 7012 ioc->name)); 7013 7014 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK; 7015 7016 if (mpt_fwfault_debug) 7017 mpt_halt_firmware(ioc); 7018 7019 if (ioc_state == MPI_IOC_STATE_FAULT || 7020 ioc_state == MPI_IOC_STATE_RESET) { 7021 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 7022 "skipping, either in FAULT or RESET state!\n", ioc->name)); 7023 return -1; 7024 } 7025 7026 if (ioc->bus_type == FC) { 7027 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 7028 "skipping, because the bus type is FC!\n", ioc->name)); 7029 return -1; 7030 } 7031 7032 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 7033 if (ioc->ioc_reset_in_progress) { 7034 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7035 return -1; 7036 } 7037 ioc->ioc_reset_in_progress = 1; 7038 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7039 7040 rc = -1; 7041 7042 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 7043 if (MptResetHandlers[cb_idx]) 7044 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET); 7045 } 7046 7047 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 7048 if (ioc->taskmgmt_in_progress) { 7049 ioc->ioc_reset_in_progress = 0; 7050 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7051 return -1; 7052 } 7053 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7054 /* Disable reply interrupts (also blocks FreeQ) */ 7055 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); 7056 ioc->active = 0; 7057 time_count = jiffies; 7058 7059 rc = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag); 7060 7061 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 7062 if (MptResetHandlers[cb_idx]) 7063 mpt_signal_reset(cb_idx, ioc, MPT_IOC_PRE_RESET); 7064 } 7065 7066 if (rc) 7067 goto out; 7068 7069 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK; 7070 if (ioc_state != MPI_IOC_STATE_READY) 7071 goto out; 7072 7073 for (ii = 0; ii < 5; ii++) { 7074 /* Get IOC facts! Allow 5 retries */ 7075 rc = GetIocFacts(ioc, sleepFlag, 7076 MPT_HOSTEVENT_IOC_RECOVER); 7077 if (rc == 0) 7078 break; 7079 if (sleepFlag == CAN_SLEEP) 7080 msleep(100); 7081 else 7082 mdelay(100); 7083 } 7084 if (ii == 5) 7085 goto out; 7086 7087 rc = PrimeIocFifos(ioc); 7088 if (rc != 0) 7089 goto out; 7090 7091 rc = SendIocInit(ioc, sleepFlag); 7092 if (rc != 0) 7093 goto out; 7094 7095 rc = SendEventNotification(ioc, 1, sleepFlag); 7096 if (rc != 0) 7097 goto out; 7098 7099 if (ioc->hard_resets < -1) 7100 ioc->hard_resets++; 7101 7102 /* 7103 * At this point, we know soft reset succeeded. 7104 */ 7105 7106 ioc->active = 1; 7107 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM); 7108 7109 out: 7110 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 7111 ioc->ioc_reset_in_progress = 0; 7112 ioc->taskmgmt_quiesce_io = 0; 7113 ioc->taskmgmt_in_progress = 0; 7114 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7115 7116 if (ioc->active) { /* otherwise, hard reset coming */ 7117 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 7118 if (MptResetHandlers[cb_idx]) 7119 mpt_signal_reset(cb_idx, ioc, 7120 MPT_IOC_POST_RESET); 7121 } 7122 } 7123 7124 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 7125 "SoftResetHandler: completed (%d seconds): %s\n", 7126 ioc->name, jiffies_to_msecs(jiffies - time_count)/1000, 7127 ((rc == 0) ? "SUCCESS" : "FAILED"))); 7128 7129 return rc; 7130 } 7131 7132 /** 7133 * mpt_Soft_Hard_ResetHandler - Try less expensive reset 7134 * @ioc: Pointer to MPT_ADAPTER structure 7135 * @sleepFlag: Indicates if sleep or schedule must be called. 7136 * 7137 * Returns 0 for SUCCESS or -1 if FAILED. 7138 * Try for softreset first, only if it fails go for expensive 7139 * HardReset. 7140 **/ 7141 int 7142 mpt_Soft_Hard_ResetHandler(MPT_ADAPTER *ioc, int sleepFlag) { 7143 int ret = -1; 7144 7145 ret = mpt_SoftResetHandler(ioc, sleepFlag); 7146 if (ret == 0) 7147 return ret; 7148 ret = mpt_HardResetHandler(ioc, sleepFlag); 7149 return ret; 7150 } 7151 EXPORT_SYMBOL(mpt_Soft_Hard_ResetHandler); 7152 7153 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 7154 /* 7155 * Reset Handling 7156 */ 7157 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 7158 /** 7159 * mpt_HardResetHandler - Generic reset handler 7160 * @ioc: Pointer to MPT_ADAPTER structure 7161 * @sleepFlag: Indicates if sleep or schedule must be called. 7162 * 7163 * Issues SCSI Task Management call based on input arg values. 7164 * If TaskMgmt fails, returns associated SCSI request. 7165 * 7166 * Remark: _HardResetHandler can be invoked from an interrupt thread (timer) 7167 * or a non-interrupt thread. In the former, must not call schedule(). 7168 * 7169 * Note: A return of -1 is a FATAL error case, as it means a 7170 * FW reload/initialization failed. 7171 * 7172 * Returns 0 for SUCCESS or -1 if FAILED. 7173 */ 7174 int 7175 mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag) 7176 { 7177 int rc; 7178 u8 cb_idx; 7179 unsigned long flags; 7180 unsigned long time_count; 7181 7182 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HardResetHandler Entered!\n", ioc->name)); 7183 #ifdef MFCNT 7184 printk(MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name); 7185 printk("MF count 0x%x !\n", ioc->mfcnt); 7186 #endif 7187 if (mpt_fwfault_debug) 7188 mpt_halt_firmware(ioc); 7189 7190 /* Reset the adapter. Prevent more than 1 call to 7191 * mpt_do_ioc_recovery at any instant in time. 7192 */ 7193 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 7194 if (ioc->ioc_reset_in_progress) { 7195 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7196 ioc->wait_on_reset_completion = 1; 7197 do { 7198 ssleep(1); 7199 } while (ioc->ioc_reset_in_progress == 1); 7200 ioc->wait_on_reset_completion = 0; 7201 return ioc->reset_status; 7202 } 7203 if (ioc->wait_on_reset_completion) { 7204 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7205 rc = 0; 7206 time_count = jiffies; 7207 goto exit; 7208 } 7209 ioc->ioc_reset_in_progress = 1; 7210 if (ioc->alt_ioc) 7211 ioc->alt_ioc->ioc_reset_in_progress = 1; 7212 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7213 7214 7215 /* The SCSI driver needs to adjust timeouts on all current 7216 * commands prior to the diagnostic reset being issued. 7217 * Prevents timeouts occurring during a diagnostic reset...very bad. 7218 * For all other protocol drivers, this is a no-op. 7219 */ 7220 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 7221 if (MptResetHandlers[cb_idx]) { 7222 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET); 7223 if (ioc->alt_ioc) 7224 mpt_signal_reset(cb_idx, ioc->alt_ioc, 7225 MPT_IOC_SETUP_RESET); 7226 } 7227 } 7228 7229 time_count = jiffies; 7230 rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag); 7231 if (rc != 0) { 7232 printk(KERN_WARNING MYNAM 7233 ": WARNING - (%d) Cannot recover %s, doorbell=0x%08x\n", 7234 rc, ioc->name, mpt_GetIocState(ioc, 0)); 7235 } else { 7236 if (ioc->hard_resets < -1) 7237 ioc->hard_resets++; 7238 } 7239 7240 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 7241 ioc->ioc_reset_in_progress = 0; 7242 ioc->taskmgmt_quiesce_io = 0; 7243 ioc->taskmgmt_in_progress = 0; 7244 ioc->reset_status = rc; 7245 if (ioc->alt_ioc) { 7246 ioc->alt_ioc->ioc_reset_in_progress = 0; 7247 ioc->alt_ioc->taskmgmt_quiesce_io = 0; 7248 ioc->alt_ioc->taskmgmt_in_progress = 0; 7249 } 7250 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7251 7252 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 7253 if (MptResetHandlers[cb_idx]) { 7254 mpt_signal_reset(cb_idx, ioc, MPT_IOC_POST_RESET); 7255 if (ioc->alt_ioc) 7256 mpt_signal_reset(cb_idx, 7257 ioc->alt_ioc, MPT_IOC_POST_RESET); 7258 } 7259 } 7260 exit: 7261 dtmprintk(ioc, 7262 printk(MYIOC_s_DEBUG_FMT 7263 "HardResetHandler: completed (%d seconds): %s\n", ioc->name, 7264 jiffies_to_msecs(jiffies - time_count)/1000, ((rc == 0) ? 7265 "SUCCESS" : "FAILED"))); 7266 7267 return rc; 7268 } 7269 7270 #ifdef CONFIG_FUSION_LOGGING 7271 static void 7272 mpt_display_event_info(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply) 7273 { 7274 char *ds = NULL; 7275 u32 evData0; 7276 int ii; 7277 u8 event; 7278 char *evStr = ioc->evStr; 7279 7280 event = le32_to_cpu(pEventReply->Event) & 0xFF; 7281 evData0 = le32_to_cpu(pEventReply->Data[0]); 7282 7283 switch(event) { 7284 case MPI_EVENT_NONE: 7285 ds = "None"; 7286 break; 7287 case MPI_EVENT_LOG_DATA: 7288 ds = "Log Data"; 7289 break; 7290 case MPI_EVENT_STATE_CHANGE: 7291 ds = "State Change"; 7292 break; 7293 case MPI_EVENT_UNIT_ATTENTION: 7294 ds = "Unit Attention"; 7295 break; 7296 case MPI_EVENT_IOC_BUS_RESET: 7297 ds = "IOC Bus Reset"; 7298 break; 7299 case MPI_EVENT_EXT_BUS_RESET: 7300 ds = "External Bus Reset"; 7301 break; 7302 case MPI_EVENT_RESCAN: 7303 ds = "Bus Rescan Event"; 7304 break; 7305 case MPI_EVENT_LINK_STATUS_CHANGE: 7306 if (evData0 == MPI_EVENT_LINK_STATUS_FAILURE) 7307 ds = "Link Status(FAILURE) Change"; 7308 else 7309 ds = "Link Status(ACTIVE) Change"; 7310 break; 7311 case MPI_EVENT_LOOP_STATE_CHANGE: 7312 if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LIP) 7313 ds = "Loop State(LIP) Change"; 7314 else if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LPE) 7315 ds = "Loop State(LPE) Change"; 7316 else 7317 ds = "Loop State(LPB) Change"; 7318 break; 7319 case MPI_EVENT_LOGOUT: 7320 ds = "Logout"; 7321 break; 7322 case MPI_EVENT_EVENT_CHANGE: 7323 if (evData0) 7324 ds = "Events ON"; 7325 else 7326 ds = "Events OFF"; 7327 break; 7328 case MPI_EVENT_INTEGRATED_RAID: 7329 { 7330 u8 ReasonCode = (u8)(evData0 >> 16); 7331 switch (ReasonCode) { 7332 case MPI_EVENT_RAID_RC_VOLUME_CREATED : 7333 ds = "Integrated Raid: Volume Created"; 7334 break; 7335 case MPI_EVENT_RAID_RC_VOLUME_DELETED : 7336 ds = "Integrated Raid: Volume Deleted"; 7337 break; 7338 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED : 7339 ds = "Integrated Raid: Volume Settings Changed"; 7340 break; 7341 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED : 7342 ds = "Integrated Raid: Volume Status Changed"; 7343 break; 7344 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED : 7345 ds = "Integrated Raid: Volume Physdisk Changed"; 7346 break; 7347 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED : 7348 ds = "Integrated Raid: Physdisk Created"; 7349 break; 7350 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED : 7351 ds = "Integrated Raid: Physdisk Deleted"; 7352 break; 7353 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED : 7354 ds = "Integrated Raid: Physdisk Settings Changed"; 7355 break; 7356 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED : 7357 ds = "Integrated Raid: Physdisk Status Changed"; 7358 break; 7359 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED : 7360 ds = "Integrated Raid: Domain Validation Needed"; 7361 break; 7362 case MPI_EVENT_RAID_RC_SMART_DATA : 7363 ds = "Integrated Raid; Smart Data"; 7364 break; 7365 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED : 7366 ds = "Integrated Raid: Replace Action Started"; 7367 break; 7368 default: 7369 ds = "Integrated Raid"; 7370 break; 7371 } 7372 break; 7373 } 7374 case MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE: 7375 ds = "SCSI Device Status Change"; 7376 break; 7377 case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE: 7378 { 7379 u8 id = (u8)(evData0); 7380 u8 channel = (u8)(evData0 >> 8); 7381 u8 ReasonCode = (u8)(evData0 >> 16); 7382 switch (ReasonCode) { 7383 case MPI_EVENT_SAS_DEV_STAT_RC_ADDED: 7384 snprintf(evStr, EVENT_DESCR_STR_SZ, 7385 "SAS Device Status Change: Added: " 7386 "id=%d channel=%d", id, channel); 7387 break; 7388 case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING: 7389 snprintf(evStr, EVENT_DESCR_STR_SZ, 7390 "SAS Device Status Change: Deleted: " 7391 "id=%d channel=%d", id, channel); 7392 break; 7393 case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA: 7394 snprintf(evStr, EVENT_DESCR_STR_SZ, 7395 "SAS Device Status Change: SMART Data: " 7396 "id=%d channel=%d", id, channel); 7397 break; 7398 case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED: 7399 snprintf(evStr, EVENT_DESCR_STR_SZ, 7400 "SAS Device Status Change: No Persistency: " 7401 "id=%d channel=%d", id, channel); 7402 break; 7403 case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED: 7404 snprintf(evStr, EVENT_DESCR_STR_SZ, 7405 "SAS Device Status Change: Unsupported Device " 7406 "Discovered : id=%d channel=%d", id, channel); 7407 break; 7408 case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET: 7409 snprintf(evStr, EVENT_DESCR_STR_SZ, 7410 "SAS Device Status Change: Internal Device " 7411 "Reset : id=%d channel=%d", id, channel); 7412 break; 7413 case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL: 7414 snprintf(evStr, EVENT_DESCR_STR_SZ, 7415 "SAS Device Status Change: Internal Task " 7416 "Abort : id=%d channel=%d", id, channel); 7417 break; 7418 case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL: 7419 snprintf(evStr, EVENT_DESCR_STR_SZ, 7420 "SAS Device Status Change: Internal Abort " 7421 "Task Set : id=%d channel=%d", id, channel); 7422 break; 7423 case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL: 7424 snprintf(evStr, EVENT_DESCR_STR_SZ, 7425 "SAS Device Status Change: Internal Clear " 7426 "Task Set : id=%d channel=%d", id, channel); 7427 break; 7428 case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL: 7429 snprintf(evStr, EVENT_DESCR_STR_SZ, 7430 "SAS Device Status Change: Internal Query " 7431 "Task : id=%d channel=%d", id, channel); 7432 break; 7433 default: 7434 snprintf(evStr, EVENT_DESCR_STR_SZ, 7435 "SAS Device Status Change: Unknown: " 7436 "id=%d channel=%d", id, channel); 7437 break; 7438 } 7439 break; 7440 } 7441 case MPI_EVENT_ON_BUS_TIMER_EXPIRED: 7442 ds = "Bus Timer Expired"; 7443 break; 7444 case MPI_EVENT_QUEUE_FULL: 7445 { 7446 u16 curr_depth = (u16)(evData0 >> 16); 7447 u8 channel = (u8)(evData0 >> 8); 7448 u8 id = (u8)(evData0); 7449 7450 snprintf(evStr, EVENT_DESCR_STR_SZ, 7451 "Queue Full: channel=%d id=%d depth=%d", 7452 channel, id, curr_depth); 7453 break; 7454 } 7455 case MPI_EVENT_SAS_SES: 7456 ds = "SAS SES Event"; 7457 break; 7458 case MPI_EVENT_PERSISTENT_TABLE_FULL: 7459 ds = "Persistent Table Full"; 7460 break; 7461 case MPI_EVENT_SAS_PHY_LINK_STATUS: 7462 { 7463 u8 LinkRates = (u8)(evData0 >> 8); 7464 u8 PhyNumber = (u8)(evData0); 7465 LinkRates = (LinkRates & MPI_EVENT_SAS_PLS_LR_CURRENT_MASK) >> 7466 MPI_EVENT_SAS_PLS_LR_CURRENT_SHIFT; 7467 switch (LinkRates) { 7468 case MPI_EVENT_SAS_PLS_LR_RATE_UNKNOWN: 7469 snprintf(evStr, EVENT_DESCR_STR_SZ, 7470 "SAS PHY Link Status: Phy=%d:" 7471 " Rate Unknown",PhyNumber); 7472 break; 7473 case MPI_EVENT_SAS_PLS_LR_RATE_PHY_DISABLED: 7474 snprintf(evStr, EVENT_DESCR_STR_SZ, 7475 "SAS PHY Link Status: Phy=%d:" 7476 " Phy Disabled",PhyNumber); 7477 break; 7478 case MPI_EVENT_SAS_PLS_LR_RATE_FAILED_SPEED_NEGOTIATION: 7479 snprintf(evStr, EVENT_DESCR_STR_SZ, 7480 "SAS PHY Link Status: Phy=%d:" 7481 " Failed Speed Nego",PhyNumber); 7482 break; 7483 case MPI_EVENT_SAS_PLS_LR_RATE_SATA_OOB_COMPLETE: 7484 snprintf(evStr, EVENT_DESCR_STR_SZ, 7485 "SAS PHY Link Status: Phy=%d:" 7486 " Sata OOB Completed",PhyNumber); 7487 break; 7488 case MPI_EVENT_SAS_PLS_LR_RATE_1_5: 7489 snprintf(evStr, EVENT_DESCR_STR_SZ, 7490 "SAS PHY Link Status: Phy=%d:" 7491 " Rate 1.5 Gbps",PhyNumber); 7492 break; 7493 case MPI_EVENT_SAS_PLS_LR_RATE_3_0: 7494 snprintf(evStr, EVENT_DESCR_STR_SZ, 7495 "SAS PHY Link Status: Phy=%d:" 7496 " Rate 3.0 Gbps", PhyNumber); 7497 break; 7498 case MPI_EVENT_SAS_PLS_LR_RATE_6_0: 7499 snprintf(evStr, EVENT_DESCR_STR_SZ, 7500 "SAS PHY Link Status: Phy=%d:" 7501 " Rate 6.0 Gbps", PhyNumber); 7502 break; 7503 default: 7504 snprintf(evStr, EVENT_DESCR_STR_SZ, 7505 "SAS PHY Link Status: Phy=%d", PhyNumber); 7506 break; 7507 } 7508 break; 7509 } 7510 case MPI_EVENT_SAS_DISCOVERY_ERROR: 7511 ds = "SAS Discovery Error"; 7512 break; 7513 case MPI_EVENT_IR_RESYNC_UPDATE: 7514 { 7515 u8 resync_complete = (u8)(evData0 >> 16); 7516 snprintf(evStr, EVENT_DESCR_STR_SZ, 7517 "IR Resync Update: Complete = %d:",resync_complete); 7518 break; 7519 } 7520 case MPI_EVENT_IR2: 7521 { 7522 u8 id = (u8)(evData0); 7523 u8 channel = (u8)(evData0 >> 8); 7524 u8 phys_num = (u8)(evData0 >> 24); 7525 u8 ReasonCode = (u8)(evData0 >> 16); 7526 7527 switch (ReasonCode) { 7528 case MPI_EVENT_IR2_RC_LD_STATE_CHANGED: 7529 snprintf(evStr, EVENT_DESCR_STR_SZ, 7530 "IR2: LD State Changed: " 7531 "id=%d channel=%d phys_num=%d", 7532 id, channel, phys_num); 7533 break; 7534 case MPI_EVENT_IR2_RC_PD_STATE_CHANGED: 7535 snprintf(evStr, EVENT_DESCR_STR_SZ, 7536 "IR2: PD State Changed " 7537 "id=%d channel=%d phys_num=%d", 7538 id, channel, phys_num); 7539 break; 7540 case MPI_EVENT_IR2_RC_BAD_BLOCK_TABLE_FULL: 7541 snprintf(evStr, EVENT_DESCR_STR_SZ, 7542 "IR2: Bad Block Table Full: " 7543 "id=%d channel=%d phys_num=%d", 7544 id, channel, phys_num); 7545 break; 7546 case MPI_EVENT_IR2_RC_PD_INSERTED: 7547 snprintf(evStr, EVENT_DESCR_STR_SZ, 7548 "IR2: PD Inserted: " 7549 "id=%d channel=%d phys_num=%d", 7550 id, channel, phys_num); 7551 break; 7552 case MPI_EVENT_IR2_RC_PD_REMOVED: 7553 snprintf(evStr, EVENT_DESCR_STR_SZ, 7554 "IR2: PD Removed: " 7555 "id=%d channel=%d phys_num=%d", 7556 id, channel, phys_num); 7557 break; 7558 case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED: 7559 snprintf(evStr, EVENT_DESCR_STR_SZ, 7560 "IR2: Foreign CFG Detected: " 7561 "id=%d channel=%d phys_num=%d", 7562 id, channel, phys_num); 7563 break; 7564 case MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR: 7565 snprintf(evStr, EVENT_DESCR_STR_SZ, 7566 "IR2: Rebuild Medium Error: " 7567 "id=%d channel=%d phys_num=%d", 7568 id, channel, phys_num); 7569 break; 7570 case MPI_EVENT_IR2_RC_DUAL_PORT_ADDED: 7571 snprintf(evStr, EVENT_DESCR_STR_SZ, 7572 "IR2: Dual Port Added: " 7573 "id=%d channel=%d phys_num=%d", 7574 id, channel, phys_num); 7575 break; 7576 case MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED: 7577 snprintf(evStr, EVENT_DESCR_STR_SZ, 7578 "IR2: Dual Port Removed: " 7579 "id=%d channel=%d phys_num=%d", 7580 id, channel, phys_num); 7581 break; 7582 default: 7583 ds = "IR2"; 7584 break; 7585 } 7586 break; 7587 } 7588 case MPI_EVENT_SAS_DISCOVERY: 7589 { 7590 if (evData0) 7591 ds = "SAS Discovery: Start"; 7592 else 7593 ds = "SAS Discovery: Stop"; 7594 break; 7595 } 7596 case MPI_EVENT_LOG_ENTRY_ADDED: 7597 ds = "SAS Log Entry Added"; 7598 break; 7599 7600 case MPI_EVENT_SAS_BROADCAST_PRIMITIVE: 7601 { 7602 u8 phy_num = (u8)(evData0); 7603 u8 port_num = (u8)(evData0 >> 8); 7604 u8 port_width = (u8)(evData0 >> 16); 7605 u8 primative = (u8)(evData0 >> 24); 7606 snprintf(evStr, EVENT_DESCR_STR_SZ, 7607 "SAS Broadcase Primative: phy=%d port=%d " 7608 "width=%d primative=0x%02x", 7609 phy_num, port_num, port_width, primative); 7610 break; 7611 } 7612 7613 case MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE: 7614 { 7615 u8 reason = (u8)(evData0); 7616 7617 switch (reason) { 7618 case MPI_EVENT_SAS_INIT_RC_ADDED: 7619 ds = "SAS Initiator Status Change: Added"; 7620 break; 7621 case MPI_EVENT_SAS_INIT_RC_REMOVED: 7622 ds = "SAS Initiator Status Change: Deleted"; 7623 break; 7624 default: 7625 ds = "SAS Initiator Status Change"; 7626 break; 7627 } 7628 break; 7629 } 7630 7631 case MPI_EVENT_SAS_INIT_TABLE_OVERFLOW: 7632 { 7633 u8 max_init = (u8)(evData0); 7634 u8 current_init = (u8)(evData0 >> 8); 7635 7636 snprintf(evStr, EVENT_DESCR_STR_SZ, 7637 "SAS Initiator Device Table Overflow: max initiators=%02d " 7638 "current initators=%02d", 7639 max_init, current_init); 7640 break; 7641 } 7642 case MPI_EVENT_SAS_SMP_ERROR: 7643 { 7644 u8 status = (u8)(evData0); 7645 u8 port_num = (u8)(evData0 >> 8); 7646 u8 result = (u8)(evData0 >> 16); 7647 7648 if (status == MPI_EVENT_SAS_SMP_FUNCTION_RESULT_VALID) 7649 snprintf(evStr, EVENT_DESCR_STR_SZ, 7650 "SAS SMP Error: port=%d result=0x%02x", 7651 port_num, result); 7652 else if (status == MPI_EVENT_SAS_SMP_CRC_ERROR) 7653 snprintf(evStr, EVENT_DESCR_STR_SZ, 7654 "SAS SMP Error: port=%d : CRC Error", 7655 port_num); 7656 else if (status == MPI_EVENT_SAS_SMP_TIMEOUT) 7657 snprintf(evStr, EVENT_DESCR_STR_SZ, 7658 "SAS SMP Error: port=%d : Timeout", 7659 port_num); 7660 else if (status == MPI_EVENT_SAS_SMP_NO_DESTINATION) 7661 snprintf(evStr, EVENT_DESCR_STR_SZ, 7662 "SAS SMP Error: port=%d : No Destination", 7663 port_num); 7664 else if (status == MPI_EVENT_SAS_SMP_BAD_DESTINATION) 7665 snprintf(evStr, EVENT_DESCR_STR_SZ, 7666 "SAS SMP Error: port=%d : Bad Destination", 7667 port_num); 7668 else 7669 snprintf(evStr, EVENT_DESCR_STR_SZ, 7670 "SAS SMP Error: port=%d : status=0x%02x", 7671 port_num, status); 7672 break; 7673 } 7674 7675 case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE: 7676 { 7677 u8 reason = (u8)(evData0); 7678 7679 switch (reason) { 7680 case MPI_EVENT_SAS_EXP_RC_ADDED: 7681 ds = "Expander Status Change: Added"; 7682 break; 7683 case MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING: 7684 ds = "Expander Status Change: Deleted"; 7685 break; 7686 default: 7687 ds = "Expander Status Change"; 7688 break; 7689 } 7690 break; 7691 } 7692 7693 /* 7694 * MPT base "custom" events may be added here... 7695 */ 7696 default: 7697 ds = "Unknown"; 7698 break; 7699 } 7700 if (ds) 7701 strlcpy(evStr, ds, EVENT_DESCR_STR_SZ); 7702 7703 7704 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT 7705 "MPT event:(%02Xh) : %s\n", 7706 ioc->name, event, evStr)); 7707 7708 devtverboseprintk(ioc, printk(KERN_DEBUG MYNAM 7709 ": Event data:\n")); 7710 for (ii = 0; ii < le16_to_cpu(pEventReply->EventDataLength); ii++) 7711 devtverboseprintk(ioc, printk(" %08x", 7712 le32_to_cpu(pEventReply->Data[ii]))); 7713 devtverboseprintk(ioc, printk(KERN_DEBUG "\n")); 7714 } 7715 #endif 7716 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 7717 /** 7718 * ProcessEventNotification - Route EventNotificationReply to all event handlers 7719 * @ioc: Pointer to MPT_ADAPTER structure 7720 * @pEventReply: Pointer to EventNotification reply frame 7721 * @evHandlers: Pointer to integer, number of event handlers 7722 * 7723 * Routes a received EventNotificationReply to all currently registered 7724 * event handlers. 7725 * Returns sum of event handlers return values. 7726 */ 7727 static int 7728 ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply, int *evHandlers) 7729 { 7730 u16 evDataLen; 7731 u32 evData0 = 0; 7732 int ii; 7733 u8 cb_idx; 7734 int r = 0; 7735 int handlers = 0; 7736 u8 event; 7737 7738 /* 7739 * Do platform normalization of values 7740 */ 7741 event = le32_to_cpu(pEventReply->Event) & 0xFF; 7742 evDataLen = le16_to_cpu(pEventReply->EventDataLength); 7743 if (evDataLen) { 7744 evData0 = le32_to_cpu(pEventReply->Data[0]); 7745 } 7746 7747 #ifdef CONFIG_FUSION_LOGGING 7748 if (evDataLen) 7749 mpt_display_event_info(ioc, pEventReply); 7750 #endif 7751 7752 /* 7753 * Do general / base driver event processing 7754 */ 7755 switch(event) { 7756 case MPI_EVENT_EVENT_CHANGE: /* 0A */ 7757 if (evDataLen) { 7758 u8 evState = evData0 & 0xFF; 7759 7760 /* CHECKME! What if evState unexpectedly says OFF (0)? */ 7761 7762 /* Update EventState field in cached IocFacts */ 7763 if (ioc->facts.Function) { 7764 ioc->facts.EventState = evState; 7765 } 7766 } 7767 break; 7768 case MPI_EVENT_INTEGRATED_RAID: 7769 mptbase_raid_process_event_data(ioc, 7770 (MpiEventDataRaid_t *)pEventReply->Data); 7771 break; 7772 default: 7773 break; 7774 } 7775 7776 /* 7777 * Should this event be logged? Events are written sequentially. 7778 * When buffer is full, start again at the top. 7779 */ 7780 if (ioc->events && (ioc->eventTypes & ( 1 << event))) { 7781 int idx; 7782 7783 idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE; 7784 7785 ioc->events[idx].event = event; 7786 ioc->events[idx].eventContext = ioc->eventContext; 7787 7788 for (ii = 0; ii < 2; ii++) { 7789 if (ii < evDataLen) 7790 ioc->events[idx].data[ii] = le32_to_cpu(pEventReply->Data[ii]); 7791 else 7792 ioc->events[idx].data[ii] = 0; 7793 } 7794 7795 ioc->eventContext++; 7796 } 7797 7798 7799 /* 7800 * Call each currently registered protocol event handler. 7801 */ 7802 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 7803 if (MptEvHandlers[cb_idx]) { 7804 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT 7805 "Routing Event to event handler #%d\n", 7806 ioc->name, cb_idx)); 7807 r += (*(MptEvHandlers[cb_idx]))(ioc, pEventReply); 7808 handlers++; 7809 } 7810 } 7811 /* FIXME? Examine results here? */ 7812 7813 /* 7814 * If needed, send (a single) EventAck. 7815 */ 7816 if (pEventReply->AckRequired == MPI_EVENT_NOTIFICATION_ACK_REQUIRED) { 7817 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT 7818 "EventAck required\n",ioc->name)); 7819 if ((ii = SendEventAck(ioc, pEventReply)) != 0) { 7820 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SendEventAck returned %d\n", 7821 ioc->name, ii)); 7822 } 7823 } 7824 7825 *evHandlers = handlers; 7826 return r; 7827 } 7828 7829 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 7830 /** 7831 * mpt_fc_log_info - Log information returned from Fibre Channel IOC. 7832 * @ioc: Pointer to MPT_ADAPTER structure 7833 * @log_info: U32 LogInfo reply word from the IOC 7834 * 7835 * Refer to lsi/mpi_log_fc.h. 7836 */ 7837 static void 7838 mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info) 7839 { 7840 char *desc = "unknown"; 7841 7842 switch (log_info & 0xFF000000) { 7843 case MPI_IOCLOGINFO_FC_INIT_BASE: 7844 desc = "FCP Initiator"; 7845 break; 7846 case MPI_IOCLOGINFO_FC_TARGET_BASE: 7847 desc = "FCP Target"; 7848 break; 7849 case MPI_IOCLOGINFO_FC_LAN_BASE: 7850 desc = "LAN"; 7851 break; 7852 case MPI_IOCLOGINFO_FC_MSG_BASE: 7853 desc = "MPI Message Layer"; 7854 break; 7855 case MPI_IOCLOGINFO_FC_LINK_BASE: 7856 desc = "FC Link"; 7857 break; 7858 case MPI_IOCLOGINFO_FC_CTX_BASE: 7859 desc = "Context Manager"; 7860 break; 7861 case MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET: 7862 desc = "Invalid Field Offset"; 7863 break; 7864 case MPI_IOCLOGINFO_FC_STATE_CHANGE: 7865 desc = "State Change Info"; 7866 break; 7867 } 7868 7869 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): SubClass={%s}, Value=(0x%06x)\n", 7870 ioc->name, log_info, desc, (log_info & 0xFFFFFF)); 7871 } 7872 7873 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 7874 /** 7875 * mpt_spi_log_info - Log information returned from SCSI Parallel IOC. 7876 * @ioc: Pointer to MPT_ADAPTER structure 7877 * @log_info: U32 LogInfo word from the IOC 7878 * 7879 * Refer to lsi/sp_log.h. 7880 */ 7881 static void 7882 mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info) 7883 { 7884 u32 info = log_info & 0x00FF0000; 7885 char *desc = "unknown"; 7886 7887 switch (info) { 7888 case 0x00010000: 7889 desc = "bug! MID not found"; 7890 break; 7891 7892 case 0x00020000: 7893 desc = "Parity Error"; 7894 break; 7895 7896 case 0x00030000: 7897 desc = "ASYNC Outbound Overrun"; 7898 break; 7899 7900 case 0x00040000: 7901 desc = "SYNC Offset Error"; 7902 break; 7903 7904 case 0x00050000: 7905 desc = "BM Change"; 7906 break; 7907 7908 case 0x00060000: 7909 desc = "Msg In Overflow"; 7910 break; 7911 7912 case 0x00070000: 7913 desc = "DMA Error"; 7914 break; 7915 7916 case 0x00080000: 7917 desc = "Outbound DMA Overrun"; 7918 break; 7919 7920 case 0x00090000: 7921 desc = "Task Management"; 7922 break; 7923 7924 case 0x000A0000: 7925 desc = "Device Problem"; 7926 break; 7927 7928 case 0x000B0000: 7929 desc = "Invalid Phase Change"; 7930 break; 7931 7932 case 0x000C0000: 7933 desc = "Untagged Table Size"; 7934 break; 7935 7936 } 7937 7938 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc); 7939 } 7940 7941 /* strings for sas loginfo */ 7942 static char *originator_str[] = { 7943 "IOP", /* 00h */ 7944 "PL", /* 01h */ 7945 "IR" /* 02h */ 7946 }; 7947 static char *iop_code_str[] = { 7948 NULL, /* 00h */ 7949 "Invalid SAS Address", /* 01h */ 7950 NULL, /* 02h */ 7951 "Invalid Page", /* 03h */ 7952 "Diag Message Error", /* 04h */ 7953 "Task Terminated", /* 05h */ 7954 "Enclosure Management", /* 06h */ 7955 "Target Mode" /* 07h */ 7956 }; 7957 static char *pl_code_str[] = { 7958 NULL, /* 00h */ 7959 "Open Failure", /* 01h */ 7960 "Invalid Scatter Gather List", /* 02h */ 7961 "Wrong Relative Offset or Frame Length", /* 03h */ 7962 "Frame Transfer Error", /* 04h */ 7963 "Transmit Frame Connected Low", /* 05h */ 7964 "SATA Non-NCQ RW Error Bit Set", /* 06h */ 7965 "SATA Read Log Receive Data Error", /* 07h */ 7966 "SATA NCQ Fail All Commands After Error", /* 08h */ 7967 "SATA Error in Receive Set Device Bit FIS", /* 09h */ 7968 "Receive Frame Invalid Message", /* 0Ah */ 7969 "Receive Context Message Valid Error", /* 0Bh */ 7970 "Receive Frame Current Frame Error", /* 0Ch */ 7971 "SATA Link Down", /* 0Dh */ 7972 "Discovery SATA Init W IOS", /* 0Eh */ 7973 "Config Invalid Page", /* 0Fh */ 7974 "Discovery SATA Init Timeout", /* 10h */ 7975 "Reset", /* 11h */ 7976 "Abort", /* 12h */ 7977 "IO Not Yet Executed", /* 13h */ 7978 "IO Executed", /* 14h */ 7979 "Persistent Reservation Out Not Affiliation " 7980 "Owner", /* 15h */ 7981 "Open Transmit DMA Abort", /* 16h */ 7982 "IO Device Missing Delay Retry", /* 17h */ 7983 "IO Cancelled Due to Receive Error", /* 18h */ 7984 NULL, /* 19h */ 7985 NULL, /* 1Ah */ 7986 NULL, /* 1Bh */ 7987 NULL, /* 1Ch */ 7988 NULL, /* 1Dh */ 7989 NULL, /* 1Eh */ 7990 NULL, /* 1Fh */ 7991 "Enclosure Management" /* 20h */ 7992 }; 7993 static char *ir_code_str[] = { 7994 "Raid Action Error", /* 00h */ 7995 NULL, /* 00h */ 7996 NULL, /* 01h */ 7997 NULL, /* 02h */ 7998 NULL, /* 03h */ 7999 NULL, /* 04h */ 8000 NULL, /* 05h */ 8001 NULL, /* 06h */ 8002 NULL /* 07h */ 8003 }; 8004 static char *raid_sub_code_str[] = { 8005 NULL, /* 00h */ 8006 "Volume Creation Failed: Data Passed too " 8007 "Large", /* 01h */ 8008 "Volume Creation Failed: Duplicate Volumes " 8009 "Attempted", /* 02h */ 8010 "Volume Creation Failed: Max Number " 8011 "Supported Volumes Exceeded", /* 03h */ 8012 "Volume Creation Failed: DMA Error", /* 04h */ 8013 "Volume Creation Failed: Invalid Volume Type", /* 05h */ 8014 "Volume Creation Failed: Error Reading " 8015 "MFG Page 4", /* 06h */ 8016 "Volume Creation Failed: Creating Internal " 8017 "Structures", /* 07h */ 8018 NULL, /* 08h */ 8019 NULL, /* 09h */ 8020 NULL, /* 0Ah */ 8021 NULL, /* 0Bh */ 8022 NULL, /* 0Ch */ 8023 NULL, /* 0Dh */ 8024 NULL, /* 0Eh */ 8025 NULL, /* 0Fh */ 8026 "Activation failed: Already Active Volume", /* 10h */ 8027 "Activation failed: Unsupported Volume Type", /* 11h */ 8028 "Activation failed: Too Many Active Volumes", /* 12h */ 8029 "Activation failed: Volume ID in Use", /* 13h */ 8030 "Activation failed: Reported Failure", /* 14h */ 8031 "Activation failed: Importing a Volume", /* 15h */ 8032 NULL, /* 16h */ 8033 NULL, /* 17h */ 8034 NULL, /* 18h */ 8035 NULL, /* 19h */ 8036 NULL, /* 1Ah */ 8037 NULL, /* 1Bh */ 8038 NULL, /* 1Ch */ 8039 NULL, /* 1Dh */ 8040 NULL, /* 1Eh */ 8041 NULL, /* 1Fh */ 8042 "Phys Disk failed: Too Many Phys Disks", /* 20h */ 8043 "Phys Disk failed: Data Passed too Large", /* 21h */ 8044 "Phys Disk failed: DMA Error", /* 22h */ 8045 "Phys Disk failed: Invalid <channel:id>", /* 23h */ 8046 "Phys Disk failed: Creating Phys Disk Config " 8047 "Page", /* 24h */ 8048 NULL, /* 25h */ 8049 NULL, /* 26h */ 8050 NULL, /* 27h */ 8051 NULL, /* 28h */ 8052 NULL, /* 29h */ 8053 NULL, /* 2Ah */ 8054 NULL, /* 2Bh */ 8055 NULL, /* 2Ch */ 8056 NULL, /* 2Dh */ 8057 NULL, /* 2Eh */ 8058 NULL, /* 2Fh */ 8059 "Compatibility Error: IR Disabled", /* 30h */ 8060 "Compatibility Error: Inquiry Command Failed", /* 31h */ 8061 "Compatibility Error: Device not Direct Access " 8062 "Device ", /* 32h */ 8063 "Compatibility Error: Removable Device Found", /* 33h */ 8064 "Compatibility Error: Device SCSI Version not " 8065 "2 or Higher", /* 34h */ 8066 "Compatibility Error: SATA Device, 48 BIT LBA " 8067 "not Supported", /* 35h */ 8068 "Compatibility Error: Device doesn't have " 8069 "512 Byte Block Sizes", /* 36h */ 8070 "Compatibility Error: Volume Type Check Failed", /* 37h */ 8071 "Compatibility Error: Volume Type is " 8072 "Unsupported by FW", /* 38h */ 8073 "Compatibility Error: Disk Drive too Small for " 8074 "use in Volume", /* 39h */ 8075 "Compatibility Error: Phys Disk for Create " 8076 "Volume not Found", /* 3Ah */ 8077 "Compatibility Error: Too Many or too Few " 8078 "Disks for Volume Type", /* 3Bh */ 8079 "Compatibility Error: Disk stripe Sizes " 8080 "Must be 64KB", /* 3Ch */ 8081 "Compatibility Error: IME Size Limited to < 2TB", /* 3Dh */ 8082 }; 8083 8084 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 8085 /** 8086 * mpt_sas_log_info - Log information returned from SAS IOC. 8087 * @ioc: Pointer to MPT_ADAPTER structure 8088 * @log_info: U32 LogInfo reply word from the IOC 8089 * @cb_idx: callback function's handle 8090 * 8091 * Refer to lsi/mpi_log_sas.h. 8092 **/ 8093 static void 8094 mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info, u8 cb_idx) 8095 { 8096 union loginfo_type { 8097 u32 loginfo; 8098 struct { 8099 u32 subcode:16; 8100 u32 code:8; 8101 u32 originator:4; 8102 u32 bus_type:4; 8103 } dw; 8104 }; 8105 union loginfo_type sas_loginfo; 8106 char *originator_desc = NULL; 8107 char *code_desc = NULL; 8108 char *sub_code_desc = NULL; 8109 8110 sas_loginfo.loginfo = log_info; 8111 if ((sas_loginfo.dw.bus_type != 3 /*SAS*/) && 8112 (sas_loginfo.dw.originator < ARRAY_SIZE(originator_str))) 8113 return; 8114 8115 originator_desc = originator_str[sas_loginfo.dw.originator]; 8116 8117 switch (sas_loginfo.dw.originator) { 8118 8119 case 0: /* IOP */ 8120 if (sas_loginfo.dw.code < 8121 ARRAY_SIZE(iop_code_str)) 8122 code_desc = iop_code_str[sas_loginfo.dw.code]; 8123 break; 8124 case 1: /* PL */ 8125 if (sas_loginfo.dw.code < 8126 ARRAY_SIZE(pl_code_str)) 8127 code_desc = pl_code_str[sas_loginfo.dw.code]; 8128 break; 8129 case 2: /* IR */ 8130 if (sas_loginfo.dw.code >= 8131 ARRAY_SIZE(ir_code_str)) 8132 break; 8133 code_desc = ir_code_str[sas_loginfo.dw.code]; 8134 if (sas_loginfo.dw.subcode >= 8135 ARRAY_SIZE(raid_sub_code_str)) 8136 break; 8137 if (sas_loginfo.dw.code == 0) 8138 sub_code_desc = 8139 raid_sub_code_str[sas_loginfo.dw.subcode]; 8140 break; 8141 default: 8142 return; 8143 } 8144 8145 if (sub_code_desc != NULL) 8146 printk(MYIOC_s_INFO_FMT 8147 "LogInfo(0x%08x): Originator={%s}, Code={%s}," 8148 " SubCode={%s} cb_idx %s\n", 8149 ioc->name, log_info, originator_desc, code_desc, 8150 sub_code_desc, MptCallbacksName[cb_idx]); 8151 else if (code_desc != NULL) 8152 printk(MYIOC_s_INFO_FMT 8153 "LogInfo(0x%08x): Originator={%s}, Code={%s}," 8154 " SubCode(0x%04x) cb_idx %s\n", 8155 ioc->name, log_info, originator_desc, code_desc, 8156 sas_loginfo.dw.subcode, MptCallbacksName[cb_idx]); 8157 else 8158 printk(MYIOC_s_INFO_FMT 8159 "LogInfo(0x%08x): Originator={%s}, Code=(0x%02x)," 8160 " SubCode(0x%04x) cb_idx %s\n", 8161 ioc->name, log_info, originator_desc, 8162 sas_loginfo.dw.code, sas_loginfo.dw.subcode, 8163 MptCallbacksName[cb_idx]); 8164 } 8165 8166 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 8167 /** 8168 * mpt_iocstatus_info_config - IOCSTATUS information for config pages 8169 * @ioc: Pointer to MPT_ADAPTER structure 8170 * @ioc_status: U32 IOCStatus word from IOC 8171 * @mf: Pointer to MPT request frame 8172 * 8173 * Refer to lsi/mpi.h. 8174 **/ 8175 static void 8176 mpt_iocstatus_info_config(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf) 8177 { 8178 Config_t *pReq = (Config_t *)mf; 8179 char extend_desc[EVENT_DESCR_STR_SZ]; 8180 char *desc = NULL; 8181 u32 form; 8182 u8 page_type; 8183 8184 if (pReq->Header.PageType == MPI_CONFIG_PAGETYPE_EXTENDED) 8185 page_type = pReq->ExtPageType; 8186 else 8187 page_type = pReq->Header.PageType; 8188 8189 /* 8190 * ignore invalid page messages for GET_NEXT_HANDLE 8191 */ 8192 form = le32_to_cpu(pReq->PageAddress); 8193 if (ioc_status == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) { 8194 if (page_type == MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE || 8195 page_type == MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER || 8196 page_type == MPI_CONFIG_EXTPAGETYPE_ENCLOSURE) { 8197 if ((form >> MPI_SAS_DEVICE_PGAD_FORM_SHIFT) == 8198 MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE) 8199 return; 8200 } 8201 if (page_type == MPI_CONFIG_PAGETYPE_FC_DEVICE) 8202 if ((form & MPI_FC_DEVICE_PGAD_FORM_MASK) == 8203 MPI_FC_DEVICE_PGAD_FORM_NEXT_DID) 8204 return; 8205 } 8206 8207 snprintf(extend_desc, EVENT_DESCR_STR_SZ, 8208 "type=%02Xh, page=%02Xh, action=%02Xh, form=%08Xh", 8209 page_type, pReq->Header.PageNumber, pReq->Action, form); 8210 8211 switch (ioc_status) { 8212 8213 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */ 8214 desc = "Config Page Invalid Action"; 8215 break; 8216 8217 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */ 8218 desc = "Config Page Invalid Type"; 8219 break; 8220 8221 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */ 8222 desc = "Config Page Invalid Page"; 8223 break; 8224 8225 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */ 8226 desc = "Config Page Invalid Data"; 8227 break; 8228 8229 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */ 8230 desc = "Config Page No Defaults"; 8231 break; 8232 8233 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */ 8234 desc = "Config Page Can't Commit"; 8235 break; 8236 } 8237 8238 if (!desc) 8239 return; 8240 8241 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s: %s\n", 8242 ioc->name, ioc_status, desc, extend_desc)); 8243 } 8244 8245 /** 8246 * mpt_iocstatus_info - IOCSTATUS information returned from IOC. 8247 * @ioc: Pointer to MPT_ADAPTER structure 8248 * @ioc_status: U32 IOCStatus word from IOC 8249 * @mf: Pointer to MPT request frame 8250 * 8251 * Refer to lsi/mpi.h. 8252 **/ 8253 static void 8254 mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf) 8255 { 8256 u32 status = ioc_status & MPI_IOCSTATUS_MASK; 8257 char *desc = NULL; 8258 8259 switch (status) { 8260 8261 /****************************************************************************/ 8262 /* Common IOCStatus values for all replies */ 8263 /****************************************************************************/ 8264 8265 case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */ 8266 desc = "Invalid Function"; 8267 break; 8268 8269 case MPI_IOCSTATUS_BUSY: /* 0x0002 */ 8270 desc = "Busy"; 8271 break; 8272 8273 case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */ 8274 desc = "Invalid SGL"; 8275 break; 8276 8277 case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */ 8278 desc = "Internal Error"; 8279 break; 8280 8281 case MPI_IOCSTATUS_RESERVED: /* 0x0005 */ 8282 desc = "Reserved"; 8283 break; 8284 8285 case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */ 8286 desc = "Insufficient Resources"; 8287 break; 8288 8289 case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */ 8290 desc = "Invalid Field"; 8291 break; 8292 8293 case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */ 8294 desc = "Invalid State"; 8295 break; 8296 8297 /****************************************************************************/ 8298 /* Config IOCStatus values */ 8299 /****************************************************************************/ 8300 8301 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */ 8302 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */ 8303 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */ 8304 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */ 8305 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */ 8306 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */ 8307 mpt_iocstatus_info_config(ioc, status, mf); 8308 break; 8309 8310 /****************************************************************************/ 8311 /* SCSIIO Reply (SPI, FCP, SAS) initiator values */ 8312 /* */ 8313 /* Look at mptscsih_iocstatus_info_scsiio in mptscsih.c */ 8314 /* */ 8315 /****************************************************************************/ 8316 8317 case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */ 8318 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */ 8319 case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */ 8320 case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */ 8321 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */ 8322 case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */ 8323 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */ 8324 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */ 8325 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */ 8326 case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */ 8327 case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */ 8328 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */ 8329 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */ 8330 break; 8331 8332 /****************************************************************************/ 8333 /* SCSI Target values */ 8334 /****************************************************************************/ 8335 8336 case MPI_IOCSTATUS_TARGET_PRIORITY_IO: /* 0x0060 */ 8337 desc = "Target: Priority IO"; 8338 break; 8339 8340 case MPI_IOCSTATUS_TARGET_INVALID_PORT: /* 0x0061 */ 8341 desc = "Target: Invalid Port"; 8342 break; 8343 8344 case MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX: /* 0x0062 */ 8345 desc = "Target Invalid IO Index:"; 8346 break; 8347 8348 case MPI_IOCSTATUS_TARGET_ABORTED: /* 0x0063 */ 8349 desc = "Target: Aborted"; 8350 break; 8351 8352 case MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: /* 0x0064 */ 8353 desc = "Target: No Conn Retryable"; 8354 break; 8355 8356 case MPI_IOCSTATUS_TARGET_NO_CONNECTION: /* 0x0065 */ 8357 desc = "Target: No Connection"; 8358 break; 8359 8360 case MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: /* 0x006A */ 8361 desc = "Target: Transfer Count Mismatch"; 8362 break; 8363 8364 case MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT: /* 0x006B */ 8365 desc = "Target: STS Data not Sent"; 8366 break; 8367 8368 case MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: /* 0x006D */ 8369 desc = "Target: Data Offset Error"; 8370 break; 8371 8372 case MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: /* 0x006E */ 8373 desc = "Target: Too Much Write Data"; 8374 break; 8375 8376 case MPI_IOCSTATUS_TARGET_IU_TOO_SHORT: /* 0x006F */ 8377 desc = "Target: IU Too Short"; 8378 break; 8379 8380 case MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: /* 0x0070 */ 8381 desc = "Target: ACK NAK Timeout"; 8382 break; 8383 8384 case MPI_IOCSTATUS_TARGET_NAK_RECEIVED: /* 0x0071 */ 8385 desc = "Target: Nak Received"; 8386 break; 8387 8388 /****************************************************************************/ 8389 /* Fibre Channel Direct Access values */ 8390 /****************************************************************************/ 8391 8392 case MPI_IOCSTATUS_FC_ABORTED: /* 0x0066 */ 8393 desc = "FC: Aborted"; 8394 break; 8395 8396 case MPI_IOCSTATUS_FC_RX_ID_INVALID: /* 0x0067 */ 8397 desc = "FC: RX ID Invalid"; 8398 break; 8399 8400 case MPI_IOCSTATUS_FC_DID_INVALID: /* 0x0068 */ 8401 desc = "FC: DID Invalid"; 8402 break; 8403 8404 case MPI_IOCSTATUS_FC_NODE_LOGGED_OUT: /* 0x0069 */ 8405 desc = "FC: Node Logged Out"; 8406 break; 8407 8408 case MPI_IOCSTATUS_FC_EXCHANGE_CANCELED: /* 0x006C */ 8409 desc = "FC: Exchange Canceled"; 8410 break; 8411 8412 /****************************************************************************/ 8413 /* LAN values */ 8414 /****************************************************************************/ 8415 8416 case MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND: /* 0x0080 */ 8417 desc = "LAN: Device not Found"; 8418 break; 8419 8420 case MPI_IOCSTATUS_LAN_DEVICE_FAILURE: /* 0x0081 */ 8421 desc = "LAN: Device Failure"; 8422 break; 8423 8424 case MPI_IOCSTATUS_LAN_TRANSMIT_ERROR: /* 0x0082 */ 8425 desc = "LAN: Transmit Error"; 8426 break; 8427 8428 case MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED: /* 0x0083 */ 8429 desc = "LAN: Transmit Aborted"; 8430 break; 8431 8432 case MPI_IOCSTATUS_LAN_RECEIVE_ERROR: /* 0x0084 */ 8433 desc = "LAN: Receive Error"; 8434 break; 8435 8436 case MPI_IOCSTATUS_LAN_RECEIVE_ABORTED: /* 0x0085 */ 8437 desc = "LAN: Receive Aborted"; 8438 break; 8439 8440 case MPI_IOCSTATUS_LAN_PARTIAL_PACKET: /* 0x0086 */ 8441 desc = "LAN: Partial Packet"; 8442 break; 8443 8444 case MPI_IOCSTATUS_LAN_CANCELED: /* 0x0087 */ 8445 desc = "LAN: Canceled"; 8446 break; 8447 8448 /****************************************************************************/ 8449 /* Serial Attached SCSI values */ 8450 /****************************************************************************/ 8451 8452 case MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED: /* 0x0090 */ 8453 desc = "SAS: SMP Request Failed"; 8454 break; 8455 8456 case MPI_IOCSTATUS_SAS_SMP_DATA_OVERRUN: /* 0x0090 */ 8457 desc = "SAS: SMP Data Overrun"; 8458 break; 8459 8460 default: 8461 desc = "Others"; 8462 break; 8463 } 8464 8465 if (!desc) 8466 return; 8467 8468 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s\n", 8469 ioc->name, status, desc)); 8470 } 8471 8472 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 8473 EXPORT_SYMBOL(mpt_attach); 8474 EXPORT_SYMBOL(mpt_detach); 8475 #ifdef CONFIG_PM 8476 EXPORT_SYMBOL(mpt_resume); 8477 EXPORT_SYMBOL(mpt_suspend); 8478 #endif 8479 EXPORT_SYMBOL(ioc_list); 8480 EXPORT_SYMBOL(mpt_register); 8481 EXPORT_SYMBOL(mpt_deregister); 8482 EXPORT_SYMBOL(mpt_event_register); 8483 EXPORT_SYMBOL(mpt_event_deregister); 8484 EXPORT_SYMBOL(mpt_reset_register); 8485 EXPORT_SYMBOL(mpt_reset_deregister); 8486 EXPORT_SYMBOL(mpt_device_driver_register); 8487 EXPORT_SYMBOL(mpt_device_driver_deregister); 8488 EXPORT_SYMBOL(mpt_get_msg_frame); 8489 EXPORT_SYMBOL(mpt_put_msg_frame); 8490 EXPORT_SYMBOL(mpt_put_msg_frame_hi_pri); 8491 EXPORT_SYMBOL(mpt_free_msg_frame); 8492 EXPORT_SYMBOL(mpt_send_handshake_request); 8493 EXPORT_SYMBOL(mpt_verify_adapter); 8494 EXPORT_SYMBOL(mpt_GetIocState); 8495 EXPORT_SYMBOL(mpt_print_ioc_summary); 8496 EXPORT_SYMBOL(mpt_HardResetHandler); 8497 EXPORT_SYMBOL(mpt_config); 8498 EXPORT_SYMBOL(mpt_findImVolumes); 8499 EXPORT_SYMBOL(mpt_alloc_fw_memory); 8500 EXPORT_SYMBOL(mpt_free_fw_memory); 8501 EXPORT_SYMBOL(mptbase_sas_persist_operation); 8502 EXPORT_SYMBOL(mpt_raid_phys_disk_pg0); 8503 8504 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 8505 /** 8506 * fusion_init - Fusion MPT base driver initialization routine. 8507 * 8508 * Returns 0 for success, non-zero for failure. 8509 */ 8510 static int __init 8511 fusion_init(void) 8512 { 8513 u8 cb_idx; 8514 8515 show_mptmod_ver(my_NAME, my_VERSION); 8516 printk(KERN_INFO COPYRIGHT "\n"); 8517 8518 for (cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) { 8519 MptCallbacks[cb_idx] = NULL; 8520 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER; 8521 MptEvHandlers[cb_idx] = NULL; 8522 MptResetHandlers[cb_idx] = NULL; 8523 } 8524 8525 /* Register ourselves (mptbase) in order to facilitate 8526 * EventNotification handling. 8527 */ 8528 mpt_base_index = mpt_register(mptbase_reply, MPTBASE_DRIVER, 8529 "mptbase_reply"); 8530 8531 /* Register for hard reset handling callbacks. 8532 */ 8533 mpt_reset_register(mpt_base_index, mpt_ioc_reset); 8534 8535 #ifdef CONFIG_PROC_FS 8536 (void) procmpt_create(); 8537 #endif 8538 return 0; 8539 } 8540 8541 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 8542 /** 8543 * fusion_exit - Perform driver unload cleanup. 8544 * 8545 * This routine frees all resources associated with each MPT adapter 8546 * and removes all %MPT_PROCFS_MPTBASEDIR entries. 8547 */ 8548 static void __exit 8549 fusion_exit(void) 8550 { 8551 8552 mpt_reset_deregister(mpt_base_index); 8553 8554 #ifdef CONFIG_PROC_FS 8555 procmpt_destroy(); 8556 #endif 8557 } 8558 8559 module_init(fusion_init); 8560 module_exit(fusion_exit); 8561