1 /* 2 * linux/drivers/message/fusion/mptbase.c 3 * This is the Fusion MPT base driver which supports multiple 4 * (SCSI + LAN) specialized protocol drivers. 5 * For use with LSI PCI chip/adapter(s) 6 * running LSI Fusion MPT (Message Passing Technology) firmware. 7 * 8 * Copyright (c) 1999-2008 LSI Corporation 9 * (mailto:DL-MPTFusionLinux@lsi.com) 10 * 11 */ 12 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 13 /* 14 This program is free software; you can redistribute it and/or modify 15 it under the terms of the GNU General Public License as published by 16 the Free Software Foundation; version 2 of the License. 17 18 This program is distributed in the hope that it will be useful, 19 but WITHOUT ANY WARRANTY; without even the implied warranty of 20 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 21 GNU General Public License for more details. 22 23 NO WARRANTY 24 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR 25 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT 26 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, 27 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is 28 solely responsible for determining the appropriateness of using and 29 distributing the Program and assumes all risks associated with its 30 exercise of rights under this Agreement, including but not limited to 31 the risks and costs of program errors, damage to or loss of data, 32 programs or equipment, and unavailability or interruption of operations. 33 34 DISCLAIMER OF LIABILITY 35 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY 36 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 37 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND 38 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR 39 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE 40 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED 41 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES 42 43 You should have received a copy of the GNU General Public License 44 along with this program; if not, write to the Free Software 45 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 46 */ 47 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 48 49 #include <linux/kernel.h> 50 #include <linux/module.h> 51 #include <linux/errno.h> 52 #include <linux/init.h> 53 #include <linux/seq_file.h> 54 #include <linux/slab.h> 55 #include <linux/types.h> 56 #include <linux/pci.h> 57 #include <linux/kdev_t.h> 58 #include <linux/blkdev.h> 59 #include <linux/delay.h> 60 #include <linux/interrupt.h> /* needed for in_interrupt() proto */ 61 #include <linux/dma-mapping.h> 62 #include <asm/io.h> 63 #ifdef CONFIG_MTRR 64 #include <asm/mtrr.h> 65 #endif 66 #include <linux/kthread.h> 67 #include <scsi/scsi_host.h> 68 69 #include "mptbase.h" 70 #include "lsi/mpi_log_fc.h" 71 72 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 73 #define my_NAME "Fusion MPT base driver" 74 #define my_VERSION MPT_LINUX_VERSION_COMMON 75 #define MYNAM "mptbase" 76 77 MODULE_AUTHOR(MODULEAUTHOR); 78 MODULE_DESCRIPTION(my_NAME); 79 MODULE_LICENSE("GPL"); 80 MODULE_VERSION(my_VERSION); 81 82 /* 83 * cmd line parameters 84 */ 85 86 static int mpt_msi_enable_spi; 87 module_param(mpt_msi_enable_spi, int, 0); 88 MODULE_PARM_DESC(mpt_msi_enable_spi, 89 " Enable MSI Support for SPI controllers (default=0)"); 90 91 static int mpt_msi_enable_fc; 92 module_param(mpt_msi_enable_fc, int, 0); 93 MODULE_PARM_DESC(mpt_msi_enable_fc, 94 " Enable MSI Support for FC controllers (default=0)"); 95 96 static int mpt_msi_enable_sas; 97 module_param(mpt_msi_enable_sas, int, 0); 98 MODULE_PARM_DESC(mpt_msi_enable_sas, 99 " Enable MSI Support for SAS controllers (default=0)"); 100 101 static int mpt_channel_mapping; 102 module_param(mpt_channel_mapping, int, 0); 103 MODULE_PARM_DESC(mpt_channel_mapping, " Mapping id's to channels (default=0)"); 104 105 static int mpt_debug_level; 106 static int mpt_set_debug_level(const char *val, struct kernel_param *kp); 107 module_param_call(mpt_debug_level, mpt_set_debug_level, param_get_int, 108 &mpt_debug_level, 0600); 109 MODULE_PARM_DESC(mpt_debug_level, 110 " debug level - refer to mptdebug.h - (default=0)"); 111 112 int mpt_fwfault_debug; 113 EXPORT_SYMBOL(mpt_fwfault_debug); 114 module_param(mpt_fwfault_debug, int, 0600); 115 MODULE_PARM_DESC(mpt_fwfault_debug, 116 "Enable detection of Firmware fault and halt Firmware on fault - (default=0)"); 117 118 static char MptCallbacksName[MPT_MAX_PROTOCOL_DRIVERS] 119 [MPT_MAX_CALLBACKNAME_LEN+1]; 120 121 #ifdef MFCNT 122 static int mfcounter = 0; 123 #define PRINT_MF_COUNT 20000 124 #endif 125 126 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 127 /* 128 * Public data... 129 */ 130 131 #define WHOINIT_UNKNOWN 0xAA 132 133 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 134 /* 135 * Private data... 136 */ 137 /* Adapter link list */ 138 LIST_HEAD(ioc_list); 139 /* Callback lookup table */ 140 static MPT_CALLBACK MptCallbacks[MPT_MAX_PROTOCOL_DRIVERS]; 141 /* Protocol driver class lookup table */ 142 static int MptDriverClass[MPT_MAX_PROTOCOL_DRIVERS]; 143 /* Event handler lookup table */ 144 static MPT_EVHANDLER MptEvHandlers[MPT_MAX_PROTOCOL_DRIVERS]; 145 /* Reset handler lookup table */ 146 static MPT_RESETHANDLER MptResetHandlers[MPT_MAX_PROTOCOL_DRIVERS]; 147 static struct mpt_pci_driver *MptDeviceDriverHandlers[MPT_MAX_PROTOCOL_DRIVERS]; 148 149 #ifdef CONFIG_PROC_FS 150 static struct proc_dir_entry *mpt_proc_root_dir; 151 #endif 152 153 /* 154 * Driver Callback Index's 155 */ 156 static u8 mpt_base_index = MPT_MAX_PROTOCOL_DRIVERS; 157 static u8 last_drv_idx; 158 159 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 160 /* 161 * Forward protos... 162 */ 163 static irqreturn_t mpt_interrupt(int irq, void *bus_id); 164 static int mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, 165 MPT_FRAME_HDR *reply); 166 static int mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, 167 u32 *req, int replyBytes, u16 *u16reply, int maxwait, 168 int sleepFlag); 169 static int mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag); 170 static void mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev); 171 static void mpt_adapter_disable(MPT_ADAPTER *ioc); 172 static void mpt_adapter_dispose(MPT_ADAPTER *ioc); 173 174 static void MptDisplayIocCapabilities(MPT_ADAPTER *ioc); 175 static int MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag); 176 static int GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason); 177 static int GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag); 178 static int SendIocInit(MPT_ADAPTER *ioc, int sleepFlag); 179 static int SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag); 180 static int mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag); 181 static int mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag); 182 static int mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag); 183 static int KickStart(MPT_ADAPTER *ioc, int ignore, int sleepFlag); 184 static int SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag); 185 static int PrimeIocFifos(MPT_ADAPTER *ioc); 186 static int WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag); 187 static int WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag); 188 static int WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag); 189 static int GetLanConfigPages(MPT_ADAPTER *ioc); 190 static int GetIoUnitPage2(MPT_ADAPTER *ioc); 191 int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode); 192 static int mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum); 193 static int mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum); 194 static void mpt_read_ioc_pg_1(MPT_ADAPTER *ioc); 195 static void mpt_read_ioc_pg_4(MPT_ADAPTER *ioc); 196 static void mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc); 197 static int SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch, 198 int sleepFlag); 199 static int SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp); 200 static int mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag); 201 static int mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init); 202 203 #ifdef CONFIG_PROC_FS 204 static const struct file_operations mpt_summary_proc_fops; 205 static const struct file_operations mpt_version_proc_fops; 206 static const struct file_operations mpt_iocinfo_proc_fops; 207 #endif 208 static void mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc); 209 210 static int ProcessEventNotification(MPT_ADAPTER *ioc, 211 EventNotificationReply_t *evReply, int *evHandlers); 212 static void mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf); 213 static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info); 214 static void mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info); 215 static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info , u8 cb_idx); 216 static int mpt_read_ioc_pg_3(MPT_ADAPTER *ioc); 217 static void mpt_inactive_raid_list_free(MPT_ADAPTER *ioc); 218 219 /* module entry point */ 220 static int __init fusion_init (void); 221 static void __exit fusion_exit (void); 222 223 #define CHIPREG_READ32(addr) readl_relaxed(addr) 224 #define CHIPREG_READ32_dmasync(addr) readl(addr) 225 #define CHIPREG_WRITE32(addr,val) writel(val, addr) 226 #define CHIPREG_PIO_WRITE32(addr,val) outl(val, (unsigned long)addr) 227 #define CHIPREG_PIO_READ32(addr) inl((unsigned long)addr) 228 229 static void 230 pci_disable_io_access(struct pci_dev *pdev) 231 { 232 u16 command_reg; 233 234 pci_read_config_word(pdev, PCI_COMMAND, &command_reg); 235 command_reg &= ~1; 236 pci_write_config_word(pdev, PCI_COMMAND, command_reg); 237 } 238 239 static void 240 pci_enable_io_access(struct pci_dev *pdev) 241 { 242 u16 command_reg; 243 244 pci_read_config_word(pdev, PCI_COMMAND, &command_reg); 245 command_reg |= 1; 246 pci_write_config_word(pdev, PCI_COMMAND, command_reg); 247 } 248 249 static int mpt_set_debug_level(const char *val, struct kernel_param *kp) 250 { 251 int ret = param_set_int(val, kp); 252 MPT_ADAPTER *ioc; 253 254 if (ret) 255 return ret; 256 257 list_for_each_entry(ioc, &ioc_list, list) 258 ioc->debug_level = mpt_debug_level; 259 return 0; 260 } 261 262 /** 263 * mpt_get_cb_idx - obtain cb_idx for registered driver 264 * @dclass: class driver enum 265 * 266 * Returns cb_idx, or zero means it wasn't found 267 **/ 268 static u8 269 mpt_get_cb_idx(MPT_DRIVER_CLASS dclass) 270 { 271 u8 cb_idx; 272 273 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) 274 if (MptDriverClass[cb_idx] == dclass) 275 return cb_idx; 276 return 0; 277 } 278 279 /** 280 * mpt_is_discovery_complete - determine if discovery has completed 281 * @ioc: per adatper instance 282 * 283 * Returns 1 when discovery completed, else zero. 284 */ 285 static int 286 mpt_is_discovery_complete(MPT_ADAPTER *ioc) 287 { 288 ConfigExtendedPageHeader_t hdr; 289 CONFIGPARMS cfg; 290 SasIOUnitPage0_t *buffer; 291 dma_addr_t dma_handle; 292 int rc = 0; 293 294 memset(&hdr, 0, sizeof(ConfigExtendedPageHeader_t)); 295 memset(&cfg, 0, sizeof(CONFIGPARMS)); 296 hdr.PageVersion = MPI_SASIOUNITPAGE0_PAGEVERSION; 297 hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; 298 hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT; 299 cfg.cfghdr.ehdr = &hdr; 300 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 301 302 if ((mpt_config(ioc, &cfg))) 303 goto out; 304 if (!hdr.ExtPageLength) 305 goto out; 306 307 buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4, 308 &dma_handle); 309 if (!buffer) 310 goto out; 311 312 cfg.physAddr = dma_handle; 313 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 314 315 if ((mpt_config(ioc, &cfg))) 316 goto out_free_consistent; 317 318 if (!(buffer->PhyData[0].PortFlags & 319 MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS)) 320 rc = 1; 321 322 out_free_consistent: 323 pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4, 324 buffer, dma_handle); 325 out: 326 return rc; 327 } 328 329 330 /** 331 * mpt_remove_dead_ioc_func - kthread context to remove dead ioc 332 * @arg: input argument, used to derive ioc 333 * 334 * Return 0 if controller is removed from pci subsystem. 335 * Return -1 for other case. 336 */ 337 static int mpt_remove_dead_ioc_func(void *arg) 338 { 339 MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg; 340 struct pci_dev *pdev; 341 342 if ((ioc == NULL)) 343 return -1; 344 345 pdev = ioc->pcidev; 346 if ((pdev == NULL)) 347 return -1; 348 349 pci_stop_and_remove_bus_device(pdev); 350 return 0; 351 } 352 353 354 355 /** 356 * mpt_fault_reset_work - work performed on workq after ioc fault 357 * @work: input argument, used to derive ioc 358 * 359 **/ 360 static void 361 mpt_fault_reset_work(struct work_struct *work) 362 { 363 MPT_ADAPTER *ioc = 364 container_of(work, MPT_ADAPTER, fault_reset_work.work); 365 u32 ioc_raw_state; 366 int rc; 367 unsigned long flags; 368 MPT_SCSI_HOST *hd; 369 struct task_struct *p; 370 371 if (ioc->ioc_reset_in_progress || !ioc->active) 372 goto out; 373 374 375 ioc_raw_state = mpt_GetIocState(ioc, 0); 376 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_MASK) { 377 printk(MYIOC_s_INFO_FMT "%s: IOC is non-operational !!!!\n", 378 ioc->name, __func__); 379 380 /* 381 * Call mptscsih_flush_pending_cmds callback so that we 382 * flush all pending commands back to OS. 383 * This call is required to aovid deadlock at block layer. 384 * Dead IOC will fail to do diag reset,and this call is safe 385 * since dead ioc will never return any command back from HW. 386 */ 387 hd = shost_priv(ioc->sh); 388 ioc->schedule_dead_ioc_flush_running_cmds(hd); 389 390 /*Remove the Dead Host */ 391 p = kthread_run(mpt_remove_dead_ioc_func, ioc, 392 "mpt_dead_ioc_%d", ioc->id); 393 if (IS_ERR(p)) { 394 printk(MYIOC_s_ERR_FMT 395 "%s: Running mpt_dead_ioc thread failed !\n", 396 ioc->name, __func__); 397 } else { 398 printk(MYIOC_s_WARN_FMT 399 "%s: Running mpt_dead_ioc thread success !\n", 400 ioc->name, __func__); 401 } 402 return; /* don't rearm timer */ 403 } 404 405 if ((ioc_raw_state & MPI_IOC_STATE_MASK) 406 == MPI_IOC_STATE_FAULT) { 407 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state (%04xh)!!!\n", 408 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK); 409 printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n", 410 ioc->name, __func__); 411 rc = mpt_HardResetHandler(ioc, CAN_SLEEP); 412 printk(MYIOC_s_WARN_FMT "%s: HardReset: %s\n", ioc->name, 413 __func__, (rc == 0) ? "success" : "failed"); 414 ioc_raw_state = mpt_GetIocState(ioc, 0); 415 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) 416 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state after " 417 "reset (%04xh)\n", ioc->name, ioc_raw_state & 418 MPI_DOORBELL_DATA_MASK); 419 } else if (ioc->bus_type == SAS && ioc->sas_discovery_quiesce_io) { 420 if ((mpt_is_discovery_complete(ioc))) { 421 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "clearing " 422 "discovery_quiesce_io flag\n", ioc->name)); 423 ioc->sas_discovery_quiesce_io = 0; 424 } 425 } 426 427 out: 428 /* 429 * Take turns polling alternate controller 430 */ 431 if (ioc->alt_ioc) 432 ioc = ioc->alt_ioc; 433 434 /* rearm the timer */ 435 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 436 if (ioc->reset_work_q) 437 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work, 438 msecs_to_jiffies(MPT_POLLING_INTERVAL)); 439 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 440 } 441 442 443 /* 444 * Process turbo (context) reply... 445 */ 446 static void 447 mpt_turbo_reply(MPT_ADAPTER *ioc, u32 pa) 448 { 449 MPT_FRAME_HDR *mf = NULL; 450 MPT_FRAME_HDR *mr = NULL; 451 u16 req_idx = 0; 452 u8 cb_idx; 453 454 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got TURBO reply req_idx=%08x\n", 455 ioc->name, pa)); 456 457 switch (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT) { 458 case MPI_CONTEXT_REPLY_TYPE_SCSI_INIT: 459 req_idx = pa & 0x0000FFFF; 460 cb_idx = (pa & 0x00FF0000) >> 16; 461 mf = MPT_INDEX_2_MFPTR(ioc, req_idx); 462 break; 463 case MPI_CONTEXT_REPLY_TYPE_LAN: 464 cb_idx = mpt_get_cb_idx(MPTLAN_DRIVER); 465 /* 466 * Blind set of mf to NULL here was fatal 467 * after lan_reply says "freeme" 468 * Fix sort of combined with an optimization here; 469 * added explicit check for case where lan_reply 470 * was just returning 1 and doing nothing else. 471 * For this case skip the callback, but set up 472 * proper mf value first here:-) 473 */ 474 if ((pa & 0x58000000) == 0x58000000) { 475 req_idx = pa & 0x0000FFFF; 476 mf = MPT_INDEX_2_MFPTR(ioc, req_idx); 477 mpt_free_msg_frame(ioc, mf); 478 mb(); 479 return; 480 break; 481 } 482 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa); 483 break; 484 case MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET: 485 cb_idx = mpt_get_cb_idx(MPTSTM_DRIVER); 486 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa); 487 break; 488 default: 489 cb_idx = 0; 490 BUG(); 491 } 492 493 /* Check for (valid) IO callback! */ 494 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS || 495 MptCallbacks[cb_idx] == NULL) { 496 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n", 497 __func__, ioc->name, cb_idx); 498 goto out; 499 } 500 501 if (MptCallbacks[cb_idx](ioc, mf, mr)) 502 mpt_free_msg_frame(ioc, mf); 503 out: 504 mb(); 505 } 506 507 static void 508 mpt_reply(MPT_ADAPTER *ioc, u32 pa) 509 { 510 MPT_FRAME_HDR *mf; 511 MPT_FRAME_HDR *mr; 512 u16 req_idx; 513 u8 cb_idx; 514 int freeme; 515 516 u32 reply_dma_low; 517 u16 ioc_stat; 518 519 /* non-TURBO reply! Hmmm, something may be up... 520 * Newest turbo reply mechanism; get address 521 * via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)! 522 */ 523 524 /* Map DMA address of reply header to cpu address. 525 * pa is 32 bits - but the dma address may be 32 or 64 bits 526 * get offset based only only the low addresses 527 */ 528 529 reply_dma_low = (pa <<= 1); 530 mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames + 531 (reply_dma_low - ioc->reply_frames_low_dma)); 532 533 req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx); 534 cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx; 535 mf = MPT_INDEX_2_MFPTR(ioc, req_idx); 536 537 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n", 538 ioc->name, mr, req_idx, cb_idx, mr->u.hdr.Function)); 539 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mr); 540 541 /* Check/log IOC log info 542 */ 543 ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus); 544 if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) { 545 u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo); 546 if (ioc->bus_type == FC) 547 mpt_fc_log_info(ioc, log_info); 548 else if (ioc->bus_type == SPI) 549 mpt_spi_log_info(ioc, log_info); 550 else if (ioc->bus_type == SAS) 551 mpt_sas_log_info(ioc, log_info, cb_idx); 552 } 553 554 if (ioc_stat & MPI_IOCSTATUS_MASK) 555 mpt_iocstatus_info(ioc, (u32)ioc_stat, mf); 556 557 /* Check for (valid) IO callback! */ 558 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS || 559 MptCallbacks[cb_idx] == NULL) { 560 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n", 561 __func__, ioc->name, cb_idx); 562 freeme = 0; 563 goto out; 564 } 565 566 freeme = MptCallbacks[cb_idx](ioc, mf, mr); 567 568 out: 569 /* Flush (non-TURBO) reply with a WRITE! */ 570 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa); 571 572 if (freeme) 573 mpt_free_msg_frame(ioc, mf); 574 mb(); 575 } 576 577 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 578 /** 579 * mpt_interrupt - MPT adapter (IOC) specific interrupt handler. 580 * @irq: irq number (not used) 581 * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure 582 * 583 * This routine is registered via the request_irq() kernel API call, 584 * and handles all interrupts generated from a specific MPT adapter 585 * (also referred to as a IO Controller or IOC). 586 * This routine must clear the interrupt from the adapter and does 587 * so by reading the reply FIFO. Multiple replies may be processed 588 * per single call to this routine. 589 * 590 * This routine handles register-level access of the adapter but 591 * dispatches (calls) a protocol-specific callback routine to handle 592 * the protocol-specific details of the MPT request completion. 593 */ 594 static irqreturn_t 595 mpt_interrupt(int irq, void *bus_id) 596 { 597 MPT_ADAPTER *ioc = bus_id; 598 u32 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo); 599 600 if (pa == 0xFFFFFFFF) 601 return IRQ_NONE; 602 603 /* 604 * Drain the reply FIFO! 605 */ 606 do { 607 if (pa & MPI_ADDRESS_REPLY_A_BIT) 608 mpt_reply(ioc, pa); 609 else 610 mpt_turbo_reply(ioc, pa); 611 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo); 612 } while (pa != 0xFFFFFFFF); 613 614 return IRQ_HANDLED; 615 } 616 617 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 618 /** 619 * mptbase_reply - MPT base driver's callback routine 620 * @ioc: Pointer to MPT_ADAPTER structure 621 * @req: Pointer to original MPT request frame 622 * @reply: Pointer to MPT reply frame (NULL if TurboReply) 623 * 624 * MPT base driver's callback routine; all base driver 625 * "internal" request/reply processing is routed here. 626 * Currently used for EventNotification and EventAck handling. 627 * 628 * Returns 1 indicating original alloc'd request frame ptr 629 * should be freed, or 0 if it shouldn't. 630 */ 631 static int 632 mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply) 633 { 634 EventNotificationReply_t *pEventReply; 635 u8 event; 636 int evHandlers; 637 int freereq = 1; 638 639 switch (reply->u.hdr.Function) { 640 case MPI_FUNCTION_EVENT_NOTIFICATION: 641 pEventReply = (EventNotificationReply_t *)reply; 642 evHandlers = 0; 643 ProcessEventNotification(ioc, pEventReply, &evHandlers); 644 event = le32_to_cpu(pEventReply->Event) & 0xFF; 645 if (pEventReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY) 646 freereq = 0; 647 if (event != MPI_EVENT_EVENT_CHANGE) 648 break; 649 case MPI_FUNCTION_CONFIG: 650 case MPI_FUNCTION_SAS_IO_UNIT_CONTROL: 651 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD; 652 if (reply) { 653 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_RF_VALID; 654 memcpy(ioc->mptbase_cmds.reply, reply, 655 min(MPT_DEFAULT_FRAME_SIZE, 656 4 * reply->u.reply.MsgLength)); 657 } 658 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) { 659 ioc->mptbase_cmds.status &= ~MPT_MGMT_STATUS_PENDING; 660 complete(&ioc->mptbase_cmds.done); 661 } else 662 freereq = 0; 663 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_FREE_MF) 664 freereq = 1; 665 break; 666 case MPI_FUNCTION_EVENT_ACK: 667 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT 668 "EventAck reply received\n", ioc->name)); 669 break; 670 default: 671 printk(MYIOC_s_ERR_FMT 672 "Unexpected msg function (=%02Xh) reply received!\n", 673 ioc->name, reply->u.hdr.Function); 674 break; 675 } 676 677 /* 678 * Conditionally tell caller to free the original 679 * EventNotification/EventAck/unexpected request frame! 680 */ 681 return freereq; 682 } 683 684 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 685 /** 686 * mpt_register - Register protocol-specific main callback handler. 687 * @cbfunc: callback function pointer 688 * @dclass: Protocol driver's class (%MPT_DRIVER_CLASS enum value) 689 * @func_name: call function's name 690 * 691 * This routine is called by a protocol-specific driver (SCSI host, 692 * LAN, SCSI target) to register its reply callback routine. Each 693 * protocol-specific driver must do this before it will be able to 694 * use any IOC resources, such as obtaining request frames. 695 * 696 * NOTES: The SCSI protocol driver currently calls this routine thrice 697 * in order to register separate callbacks; one for "normal" SCSI IO; 698 * one for MptScsiTaskMgmt requests; one for Scan/DV requests. 699 * 700 * Returns u8 valued "handle" in the range (and S.O.D. order) 701 * {N,...,7,6,5,...,1} if successful. 702 * A return value of MPT_MAX_PROTOCOL_DRIVERS (including zero!) should be 703 * considered an error by the caller. 704 */ 705 u8 706 mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass, char *func_name) 707 { 708 u8 cb_idx; 709 last_drv_idx = MPT_MAX_PROTOCOL_DRIVERS; 710 711 /* 712 * Search for empty callback slot in this order: {N,...,7,6,5,...,1} 713 * (slot/handle 0 is reserved!) 714 */ 715 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 716 if (MptCallbacks[cb_idx] == NULL) { 717 MptCallbacks[cb_idx] = cbfunc; 718 MptDriverClass[cb_idx] = dclass; 719 MptEvHandlers[cb_idx] = NULL; 720 last_drv_idx = cb_idx; 721 strlcpy(MptCallbacksName[cb_idx], func_name, 722 MPT_MAX_CALLBACKNAME_LEN+1); 723 break; 724 } 725 } 726 727 return last_drv_idx; 728 } 729 730 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 731 /** 732 * mpt_deregister - Deregister a protocol drivers resources. 733 * @cb_idx: previously registered callback handle 734 * 735 * Each protocol-specific driver should call this routine when its 736 * module is unloaded. 737 */ 738 void 739 mpt_deregister(u8 cb_idx) 740 { 741 if (cb_idx && (cb_idx < MPT_MAX_PROTOCOL_DRIVERS)) { 742 MptCallbacks[cb_idx] = NULL; 743 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER; 744 MptEvHandlers[cb_idx] = NULL; 745 746 last_drv_idx++; 747 } 748 } 749 750 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 751 /** 752 * mpt_event_register - Register protocol-specific event callback handler. 753 * @cb_idx: previously registered (via mpt_register) callback handle 754 * @ev_cbfunc: callback function 755 * 756 * This routine can be called by one or more protocol-specific drivers 757 * if/when they choose to be notified of MPT events. 758 * 759 * Returns 0 for success. 760 */ 761 int 762 mpt_event_register(u8 cb_idx, MPT_EVHANDLER ev_cbfunc) 763 { 764 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) 765 return -1; 766 767 MptEvHandlers[cb_idx] = ev_cbfunc; 768 return 0; 769 } 770 771 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 772 /** 773 * mpt_event_deregister - Deregister protocol-specific event callback handler 774 * @cb_idx: previously registered callback handle 775 * 776 * Each protocol-specific driver should call this routine 777 * when it does not (or can no longer) handle events, 778 * or when its module is unloaded. 779 */ 780 void 781 mpt_event_deregister(u8 cb_idx) 782 { 783 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) 784 return; 785 786 MptEvHandlers[cb_idx] = NULL; 787 } 788 789 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 790 /** 791 * mpt_reset_register - Register protocol-specific IOC reset handler. 792 * @cb_idx: previously registered (via mpt_register) callback handle 793 * @reset_func: reset function 794 * 795 * This routine can be called by one or more protocol-specific drivers 796 * if/when they choose to be notified of IOC resets. 797 * 798 * Returns 0 for success. 799 */ 800 int 801 mpt_reset_register(u8 cb_idx, MPT_RESETHANDLER reset_func) 802 { 803 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) 804 return -1; 805 806 MptResetHandlers[cb_idx] = reset_func; 807 return 0; 808 } 809 810 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 811 /** 812 * mpt_reset_deregister - Deregister protocol-specific IOC reset handler. 813 * @cb_idx: previously registered callback handle 814 * 815 * Each protocol-specific driver should call this routine 816 * when it does not (or can no longer) handle IOC reset handling, 817 * or when its module is unloaded. 818 */ 819 void 820 mpt_reset_deregister(u8 cb_idx) 821 { 822 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) 823 return; 824 825 MptResetHandlers[cb_idx] = NULL; 826 } 827 828 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 829 /** 830 * mpt_device_driver_register - Register device driver hooks 831 * @dd_cbfunc: driver callbacks struct 832 * @cb_idx: MPT protocol driver index 833 */ 834 int 835 mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, u8 cb_idx) 836 { 837 MPT_ADAPTER *ioc; 838 const struct pci_device_id *id; 839 840 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) 841 return -EINVAL; 842 843 MptDeviceDriverHandlers[cb_idx] = dd_cbfunc; 844 845 /* call per pci device probe entry point */ 846 list_for_each_entry(ioc, &ioc_list, list) { 847 id = ioc->pcidev->driver ? 848 ioc->pcidev->driver->id_table : NULL; 849 if (dd_cbfunc->probe) 850 dd_cbfunc->probe(ioc->pcidev, id); 851 } 852 853 return 0; 854 } 855 856 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 857 /** 858 * mpt_device_driver_deregister - DeRegister device driver hooks 859 * @cb_idx: MPT protocol driver index 860 */ 861 void 862 mpt_device_driver_deregister(u8 cb_idx) 863 { 864 struct mpt_pci_driver *dd_cbfunc; 865 MPT_ADAPTER *ioc; 866 867 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) 868 return; 869 870 dd_cbfunc = MptDeviceDriverHandlers[cb_idx]; 871 872 list_for_each_entry(ioc, &ioc_list, list) { 873 if (dd_cbfunc->remove) 874 dd_cbfunc->remove(ioc->pcidev); 875 } 876 877 MptDeviceDriverHandlers[cb_idx] = NULL; 878 } 879 880 881 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 882 /** 883 * mpt_get_msg_frame - Obtain an MPT request frame from the pool 884 * @cb_idx: Handle of registered MPT protocol driver 885 * @ioc: Pointer to MPT adapter structure 886 * 887 * Obtain an MPT request frame from the pool (of 1024) that are 888 * allocated per MPT adapter. 889 * 890 * Returns pointer to a MPT request frame or %NULL if none are available 891 * or IOC is not active. 892 */ 893 MPT_FRAME_HDR* 894 mpt_get_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc) 895 { 896 MPT_FRAME_HDR *mf; 897 unsigned long flags; 898 u16 req_idx; /* Request index */ 899 900 /* validate handle and ioc identifier */ 901 902 #ifdef MFCNT 903 if (!ioc->active) 904 printk(MYIOC_s_WARN_FMT "IOC Not Active! mpt_get_msg_frame " 905 "returning NULL!\n", ioc->name); 906 #endif 907 908 /* If interrupts are not attached, do not return a request frame */ 909 if (!ioc->active) 910 return NULL; 911 912 spin_lock_irqsave(&ioc->FreeQlock, flags); 913 if (!list_empty(&ioc->FreeQ)) { 914 int req_offset; 915 916 mf = list_entry(ioc->FreeQ.next, MPT_FRAME_HDR, 917 u.frame.linkage.list); 918 list_del(&mf->u.frame.linkage.list); 919 mf->u.frame.linkage.arg1 = 0; 920 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */ 921 req_offset = (u8 *)mf - (u8 *)ioc->req_frames; 922 /* u16! */ 923 req_idx = req_offset / ioc->req_sz; 924 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx); 925 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0; 926 /* Default, will be changed if necessary in SG generation */ 927 ioc->RequestNB[req_idx] = ioc->NB_for_64_byte_frame; 928 #ifdef MFCNT 929 ioc->mfcnt++; 930 #endif 931 } 932 else 933 mf = NULL; 934 spin_unlock_irqrestore(&ioc->FreeQlock, flags); 935 936 #ifdef MFCNT 937 if (mf == NULL) 938 printk(MYIOC_s_WARN_FMT "IOC Active. No free Msg Frames! " 939 "Count 0x%x Max 0x%x\n", ioc->name, ioc->mfcnt, 940 ioc->req_depth); 941 mfcounter++; 942 if (mfcounter == PRINT_MF_COUNT) 943 printk(MYIOC_s_INFO_FMT "MF Count 0x%x Max 0x%x \n", ioc->name, 944 ioc->mfcnt, ioc->req_depth); 945 #endif 946 947 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_get_msg_frame(%d,%d), got mf=%p\n", 948 ioc->name, cb_idx, ioc->id, mf)); 949 return mf; 950 } 951 952 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 953 /** 954 * mpt_put_msg_frame - Send a protocol-specific MPT request frame to an IOC 955 * @cb_idx: Handle of registered MPT protocol driver 956 * @ioc: Pointer to MPT adapter structure 957 * @mf: Pointer to MPT request frame 958 * 959 * This routine posts an MPT request frame to the request post FIFO of a 960 * specific MPT adapter. 961 */ 962 void 963 mpt_put_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf) 964 { 965 u32 mf_dma_addr; 966 int req_offset; 967 u16 req_idx; /* Request index */ 968 969 /* ensure values are reset properly! */ 970 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */ 971 req_offset = (u8 *)mf - (u8 *)ioc->req_frames; 972 /* u16! */ 973 req_idx = req_offset / ioc->req_sz; 974 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx); 975 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0; 976 977 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf); 978 979 mf_dma_addr = (ioc->req_frames_low_dma + req_offset) | ioc->RequestNB[req_idx]; 980 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d " 981 "RequestNB=%x\n", ioc->name, mf_dma_addr, req_idx, 982 ioc->RequestNB[req_idx])); 983 CHIPREG_WRITE32(&ioc->chip->RequestFifo, mf_dma_addr); 984 } 985 986 /** 987 * mpt_put_msg_frame_hi_pri - Send a hi-pri protocol-specific MPT request frame 988 * @cb_idx: Handle of registered MPT protocol driver 989 * @ioc: Pointer to MPT adapter structure 990 * @mf: Pointer to MPT request frame 991 * 992 * Send a protocol-specific MPT request frame to an IOC using 993 * hi-priority request queue. 994 * 995 * This routine posts an MPT request frame to the request post FIFO of a 996 * specific MPT adapter. 997 **/ 998 void 999 mpt_put_msg_frame_hi_pri(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf) 1000 { 1001 u32 mf_dma_addr; 1002 int req_offset; 1003 u16 req_idx; /* Request index */ 1004 1005 /* ensure values are reset properly! */ 1006 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; 1007 req_offset = (u8 *)mf - (u8 *)ioc->req_frames; 1008 req_idx = req_offset / ioc->req_sz; 1009 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx); 1010 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0; 1011 1012 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf); 1013 1014 mf_dma_addr = (ioc->req_frames_low_dma + req_offset); 1015 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d\n", 1016 ioc->name, mf_dma_addr, req_idx)); 1017 CHIPREG_WRITE32(&ioc->chip->RequestHiPriFifo, mf_dma_addr); 1018 } 1019 1020 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1021 /** 1022 * mpt_free_msg_frame - Place MPT request frame back on FreeQ. 1023 * @ioc: Pointer to MPT adapter structure 1024 * @mf: Pointer to MPT request frame 1025 * 1026 * This routine places a MPT request frame back on the MPT adapter's 1027 * FreeQ. 1028 */ 1029 void 1030 mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf) 1031 { 1032 unsigned long flags; 1033 1034 /* Put Request back on FreeQ! */ 1035 spin_lock_irqsave(&ioc->FreeQlock, flags); 1036 if (cpu_to_le32(mf->u.frame.linkage.arg1) == 0xdeadbeaf) 1037 goto out; 1038 /* signature to know if this mf is freed */ 1039 mf->u.frame.linkage.arg1 = cpu_to_le32(0xdeadbeaf); 1040 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ); 1041 #ifdef MFCNT 1042 ioc->mfcnt--; 1043 #endif 1044 out: 1045 spin_unlock_irqrestore(&ioc->FreeQlock, flags); 1046 } 1047 1048 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1049 /** 1050 * mpt_add_sge - Place a simple 32 bit SGE at address pAddr. 1051 * @pAddr: virtual address for SGE 1052 * @flagslength: SGE flags and data transfer length 1053 * @dma_addr: Physical address 1054 * 1055 * This routine places a MPT request frame back on the MPT adapter's 1056 * FreeQ. 1057 */ 1058 static void 1059 mpt_add_sge(void *pAddr, u32 flagslength, dma_addr_t dma_addr) 1060 { 1061 SGESimple32_t *pSge = (SGESimple32_t *) pAddr; 1062 pSge->FlagsLength = cpu_to_le32(flagslength); 1063 pSge->Address = cpu_to_le32(dma_addr); 1064 } 1065 1066 /** 1067 * mpt_add_sge_64bit - Place a simple 64 bit SGE at address pAddr. 1068 * @pAddr: virtual address for SGE 1069 * @flagslength: SGE flags and data transfer length 1070 * @dma_addr: Physical address 1071 * 1072 * This routine places a MPT request frame back on the MPT adapter's 1073 * FreeQ. 1074 **/ 1075 static void 1076 mpt_add_sge_64bit(void *pAddr, u32 flagslength, dma_addr_t dma_addr) 1077 { 1078 SGESimple64_t *pSge = (SGESimple64_t *) pAddr; 1079 pSge->Address.Low = cpu_to_le32 1080 (lower_32_bits(dma_addr)); 1081 pSge->Address.High = cpu_to_le32 1082 (upper_32_bits(dma_addr)); 1083 pSge->FlagsLength = cpu_to_le32 1084 ((flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING)); 1085 } 1086 1087 /** 1088 * mpt_add_sge_64bit_1078 - Place a simple 64 bit SGE at address pAddr (1078 workaround). 1089 * @pAddr: virtual address for SGE 1090 * @flagslength: SGE flags and data transfer length 1091 * @dma_addr: Physical address 1092 * 1093 * This routine places a MPT request frame back on the MPT adapter's 1094 * FreeQ. 1095 **/ 1096 static void 1097 mpt_add_sge_64bit_1078(void *pAddr, u32 flagslength, dma_addr_t dma_addr) 1098 { 1099 SGESimple64_t *pSge = (SGESimple64_t *) pAddr; 1100 u32 tmp; 1101 1102 pSge->Address.Low = cpu_to_le32 1103 (lower_32_bits(dma_addr)); 1104 tmp = (u32)(upper_32_bits(dma_addr)); 1105 1106 /* 1107 * 1078 errata workaround for the 36GB limitation 1108 */ 1109 if ((((u64)dma_addr + MPI_SGE_LENGTH(flagslength)) >> 32) == 9) { 1110 flagslength |= 1111 MPI_SGE_SET_FLAGS(MPI_SGE_FLAGS_LOCAL_ADDRESS); 1112 tmp |= (1<<31); 1113 if (mpt_debug_level & MPT_DEBUG_36GB_MEM) 1114 printk(KERN_DEBUG "1078 P0M2 addressing for " 1115 "addr = 0x%llx len = %d\n", 1116 (unsigned long long)dma_addr, 1117 MPI_SGE_LENGTH(flagslength)); 1118 } 1119 1120 pSge->Address.High = cpu_to_le32(tmp); 1121 pSge->FlagsLength = cpu_to_le32( 1122 (flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING)); 1123 } 1124 1125 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1126 /** 1127 * mpt_add_chain - Place a 32 bit chain SGE at address pAddr. 1128 * @pAddr: virtual address for SGE 1129 * @next: nextChainOffset value (u32's) 1130 * @length: length of next SGL segment 1131 * @dma_addr: Physical address 1132 * 1133 */ 1134 static void 1135 mpt_add_chain(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr) 1136 { 1137 SGEChain32_t *pChain = (SGEChain32_t *) pAddr; 1138 pChain->Length = cpu_to_le16(length); 1139 pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT; 1140 pChain->NextChainOffset = next; 1141 pChain->Address = cpu_to_le32(dma_addr); 1142 } 1143 1144 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1145 /** 1146 * mpt_add_chain_64bit - Place a 64 bit chain SGE at address pAddr. 1147 * @pAddr: virtual address for SGE 1148 * @next: nextChainOffset value (u32's) 1149 * @length: length of next SGL segment 1150 * @dma_addr: Physical address 1151 * 1152 */ 1153 static void 1154 mpt_add_chain_64bit(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr) 1155 { 1156 SGEChain64_t *pChain = (SGEChain64_t *) pAddr; 1157 u32 tmp = dma_addr & 0xFFFFFFFF; 1158 1159 pChain->Length = cpu_to_le16(length); 1160 pChain->Flags = (MPI_SGE_FLAGS_CHAIN_ELEMENT | 1161 MPI_SGE_FLAGS_64_BIT_ADDRESSING); 1162 1163 pChain->NextChainOffset = next; 1164 1165 pChain->Address.Low = cpu_to_le32(tmp); 1166 tmp = (u32)(upper_32_bits(dma_addr)); 1167 pChain->Address.High = cpu_to_le32(tmp); 1168 } 1169 1170 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1171 /** 1172 * mpt_send_handshake_request - Send MPT request via doorbell handshake method. 1173 * @cb_idx: Handle of registered MPT protocol driver 1174 * @ioc: Pointer to MPT adapter structure 1175 * @reqBytes: Size of the request in bytes 1176 * @req: Pointer to MPT request frame 1177 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay. 1178 * 1179 * This routine is used exclusively to send MptScsiTaskMgmt 1180 * requests since they are required to be sent via doorbell handshake. 1181 * 1182 * NOTE: It is the callers responsibility to byte-swap fields in the 1183 * request which are greater than 1 byte in size. 1184 * 1185 * Returns 0 for success, non-zero for failure. 1186 */ 1187 int 1188 mpt_send_handshake_request(u8 cb_idx, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag) 1189 { 1190 int r = 0; 1191 u8 *req_as_bytes; 1192 int ii; 1193 1194 /* State is known to be good upon entering 1195 * this function so issue the bus reset 1196 * request. 1197 */ 1198 1199 /* 1200 * Emulate what mpt_put_msg_frame() does /wrt to sanity 1201 * setting cb_idx/req_idx. But ONLY if this request 1202 * is in proper (pre-alloc'd) request buffer range... 1203 */ 1204 ii = MFPTR_2_MPT_INDEX(ioc,(MPT_FRAME_HDR*)req); 1205 if (reqBytes >= 12 && ii >= 0 && ii < ioc->req_depth) { 1206 MPT_FRAME_HDR *mf = (MPT_FRAME_HDR*)req; 1207 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(ii); 1208 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; 1209 } 1210 1211 /* Make sure there are no doorbells */ 1212 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 1213 1214 CHIPREG_WRITE32(&ioc->chip->Doorbell, 1215 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) | 1216 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT))); 1217 1218 /* Wait for IOC doorbell int */ 1219 if ((ii = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) { 1220 return ii; 1221 } 1222 1223 /* Read doorbell and check for active bit */ 1224 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE)) 1225 return -5; 1226 1227 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_send_handshake_request start, WaitCnt=%d\n", 1228 ioc->name, ii)); 1229 1230 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 1231 1232 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) { 1233 return -2; 1234 } 1235 1236 /* Send request via doorbell handshake */ 1237 req_as_bytes = (u8 *) req; 1238 for (ii = 0; ii < reqBytes/4; ii++) { 1239 u32 word; 1240 1241 word = ((req_as_bytes[(ii*4) + 0] << 0) | 1242 (req_as_bytes[(ii*4) + 1] << 8) | 1243 (req_as_bytes[(ii*4) + 2] << 16) | 1244 (req_as_bytes[(ii*4) + 3] << 24)); 1245 CHIPREG_WRITE32(&ioc->chip->Doorbell, word); 1246 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) { 1247 r = -3; 1248 break; 1249 } 1250 } 1251 1252 if (r >= 0 && WaitForDoorbellInt(ioc, 10, sleepFlag) >= 0) 1253 r = 0; 1254 else 1255 r = -4; 1256 1257 /* Make sure there are no doorbells */ 1258 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 1259 1260 return r; 1261 } 1262 1263 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1264 /** 1265 * mpt_host_page_access_control - control the IOC's Host Page Buffer access 1266 * @ioc: Pointer to MPT adapter structure 1267 * @access_control_value: define bits below 1268 * @sleepFlag: Specifies whether the process can sleep 1269 * 1270 * Provides mechanism for the host driver to control the IOC's 1271 * Host Page Buffer access. 1272 * 1273 * Access Control Value - bits[15:12] 1274 * 0h Reserved 1275 * 1h Enable Access { MPI_DB_HPBAC_ENABLE_ACCESS } 1276 * 2h Disable Access { MPI_DB_HPBAC_DISABLE_ACCESS } 1277 * 3h Free Buffer { MPI_DB_HPBAC_FREE_BUFFER } 1278 * 1279 * Returns 0 for success, non-zero for failure. 1280 */ 1281 1282 static int 1283 mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag) 1284 { 1285 int r = 0; 1286 1287 /* return if in use */ 1288 if (CHIPREG_READ32(&ioc->chip->Doorbell) 1289 & MPI_DOORBELL_ACTIVE) 1290 return -1; 1291 1292 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 1293 1294 CHIPREG_WRITE32(&ioc->chip->Doorbell, 1295 ((MPI_FUNCTION_HOST_PAGEBUF_ACCESS_CONTROL 1296 <<MPI_DOORBELL_FUNCTION_SHIFT) | 1297 (access_control_value<<12))); 1298 1299 /* Wait for IOC to clear Doorbell Status bit */ 1300 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) { 1301 return -2; 1302 }else 1303 return 0; 1304 } 1305 1306 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1307 /** 1308 * mpt_host_page_alloc - allocate system memory for the fw 1309 * @ioc: Pointer to pointer to IOC adapter 1310 * @ioc_init: Pointer to ioc init config page 1311 * 1312 * If we already allocated memory in past, then resend the same pointer. 1313 * Returns 0 for success, non-zero for failure. 1314 */ 1315 static int 1316 mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init) 1317 { 1318 char *psge; 1319 int flags_length; 1320 u32 host_page_buffer_sz=0; 1321 1322 if(!ioc->HostPageBuffer) { 1323 1324 host_page_buffer_sz = 1325 le32_to_cpu(ioc->facts.HostPageBufferSGE.FlagsLength) & 0xFFFFFF; 1326 1327 if(!host_page_buffer_sz) 1328 return 0; /* fw doesn't need any host buffers */ 1329 1330 /* spin till we get enough memory */ 1331 while(host_page_buffer_sz > 0) { 1332 1333 if((ioc->HostPageBuffer = pci_alloc_consistent( 1334 ioc->pcidev, 1335 host_page_buffer_sz, 1336 &ioc->HostPageBuffer_dma)) != NULL) { 1337 1338 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT 1339 "host_page_buffer @ %p, dma @ %x, sz=%d bytes\n", 1340 ioc->name, ioc->HostPageBuffer, 1341 (u32)ioc->HostPageBuffer_dma, 1342 host_page_buffer_sz)); 1343 ioc->alloc_total += host_page_buffer_sz; 1344 ioc->HostPageBuffer_sz = host_page_buffer_sz; 1345 break; 1346 } 1347 1348 host_page_buffer_sz -= (4*1024); 1349 } 1350 } 1351 1352 if(!ioc->HostPageBuffer) { 1353 printk(MYIOC_s_ERR_FMT 1354 "Failed to alloc memory for host_page_buffer!\n", 1355 ioc->name); 1356 return -999; 1357 } 1358 1359 psge = (char *)&ioc_init->HostPageBufferSGE; 1360 flags_length = MPI_SGE_FLAGS_SIMPLE_ELEMENT | 1361 MPI_SGE_FLAGS_SYSTEM_ADDRESS | 1362 MPI_SGE_FLAGS_HOST_TO_IOC | 1363 MPI_SGE_FLAGS_END_OF_BUFFER; 1364 flags_length = flags_length << MPI_SGE_FLAGS_SHIFT; 1365 flags_length |= ioc->HostPageBuffer_sz; 1366 ioc->add_sge(psge, flags_length, ioc->HostPageBuffer_dma); 1367 ioc->facts.HostPageBufferSGE = ioc_init->HostPageBufferSGE; 1368 1369 return 0; 1370 } 1371 1372 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1373 /** 1374 * mpt_verify_adapter - Given IOC identifier, set pointer to its adapter structure. 1375 * @iocid: IOC unique identifier (integer) 1376 * @iocpp: Pointer to pointer to IOC adapter 1377 * 1378 * Given a unique IOC identifier, set pointer to the associated MPT 1379 * adapter structure. 1380 * 1381 * Returns iocid and sets iocpp if iocid is found. 1382 * Returns -1 if iocid is not found. 1383 */ 1384 int 1385 mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp) 1386 { 1387 MPT_ADAPTER *ioc; 1388 1389 list_for_each_entry(ioc,&ioc_list,list) { 1390 if (ioc->id == iocid) { 1391 *iocpp =ioc; 1392 return iocid; 1393 } 1394 } 1395 1396 *iocpp = NULL; 1397 return -1; 1398 } 1399 1400 /** 1401 * mpt_get_product_name - returns product string 1402 * @vendor: pci vendor id 1403 * @device: pci device id 1404 * @revision: pci revision id 1405 * @prod_name: string returned 1406 * 1407 * Returns product string displayed when driver loads, 1408 * in /proc/mpt/summary and /sysfs/class/scsi_host/host<X>/version_product 1409 * 1410 **/ 1411 static void 1412 mpt_get_product_name(u16 vendor, u16 device, u8 revision, char *prod_name) 1413 { 1414 char *product_str = NULL; 1415 1416 if (vendor == PCI_VENDOR_ID_BROCADE) { 1417 switch (device) 1418 { 1419 case MPI_MANUFACTPAGE_DEVICEID_FC949E: 1420 switch (revision) 1421 { 1422 case 0x00: 1423 product_str = "BRE040 A0"; 1424 break; 1425 case 0x01: 1426 product_str = "BRE040 A1"; 1427 break; 1428 default: 1429 product_str = "BRE040"; 1430 break; 1431 } 1432 break; 1433 } 1434 goto out; 1435 } 1436 1437 switch (device) 1438 { 1439 case MPI_MANUFACTPAGE_DEVICEID_FC909: 1440 product_str = "LSIFC909 B1"; 1441 break; 1442 case MPI_MANUFACTPAGE_DEVICEID_FC919: 1443 product_str = "LSIFC919 B0"; 1444 break; 1445 case MPI_MANUFACTPAGE_DEVICEID_FC929: 1446 product_str = "LSIFC929 B0"; 1447 break; 1448 case MPI_MANUFACTPAGE_DEVICEID_FC919X: 1449 if (revision < 0x80) 1450 product_str = "LSIFC919X A0"; 1451 else 1452 product_str = "LSIFC919XL A1"; 1453 break; 1454 case MPI_MANUFACTPAGE_DEVICEID_FC929X: 1455 if (revision < 0x80) 1456 product_str = "LSIFC929X A0"; 1457 else 1458 product_str = "LSIFC929XL A1"; 1459 break; 1460 case MPI_MANUFACTPAGE_DEVICEID_FC939X: 1461 product_str = "LSIFC939X A1"; 1462 break; 1463 case MPI_MANUFACTPAGE_DEVICEID_FC949X: 1464 product_str = "LSIFC949X A1"; 1465 break; 1466 case MPI_MANUFACTPAGE_DEVICEID_FC949E: 1467 switch (revision) 1468 { 1469 case 0x00: 1470 product_str = "LSIFC949E A0"; 1471 break; 1472 case 0x01: 1473 product_str = "LSIFC949E A1"; 1474 break; 1475 default: 1476 product_str = "LSIFC949E"; 1477 break; 1478 } 1479 break; 1480 case MPI_MANUFACTPAGE_DEVID_53C1030: 1481 switch (revision) 1482 { 1483 case 0x00: 1484 product_str = "LSI53C1030 A0"; 1485 break; 1486 case 0x01: 1487 product_str = "LSI53C1030 B0"; 1488 break; 1489 case 0x03: 1490 product_str = "LSI53C1030 B1"; 1491 break; 1492 case 0x07: 1493 product_str = "LSI53C1030 B2"; 1494 break; 1495 case 0x08: 1496 product_str = "LSI53C1030 C0"; 1497 break; 1498 case 0x80: 1499 product_str = "LSI53C1030T A0"; 1500 break; 1501 case 0x83: 1502 product_str = "LSI53C1030T A2"; 1503 break; 1504 case 0x87: 1505 product_str = "LSI53C1030T A3"; 1506 break; 1507 case 0xc1: 1508 product_str = "LSI53C1020A A1"; 1509 break; 1510 default: 1511 product_str = "LSI53C1030"; 1512 break; 1513 } 1514 break; 1515 case MPI_MANUFACTPAGE_DEVID_1030_53C1035: 1516 switch (revision) 1517 { 1518 case 0x03: 1519 product_str = "LSI53C1035 A2"; 1520 break; 1521 case 0x04: 1522 product_str = "LSI53C1035 B0"; 1523 break; 1524 default: 1525 product_str = "LSI53C1035"; 1526 break; 1527 } 1528 break; 1529 case MPI_MANUFACTPAGE_DEVID_SAS1064: 1530 switch (revision) 1531 { 1532 case 0x00: 1533 product_str = "LSISAS1064 A1"; 1534 break; 1535 case 0x01: 1536 product_str = "LSISAS1064 A2"; 1537 break; 1538 case 0x02: 1539 product_str = "LSISAS1064 A3"; 1540 break; 1541 case 0x03: 1542 product_str = "LSISAS1064 A4"; 1543 break; 1544 default: 1545 product_str = "LSISAS1064"; 1546 break; 1547 } 1548 break; 1549 case MPI_MANUFACTPAGE_DEVID_SAS1064E: 1550 switch (revision) 1551 { 1552 case 0x00: 1553 product_str = "LSISAS1064E A0"; 1554 break; 1555 case 0x01: 1556 product_str = "LSISAS1064E B0"; 1557 break; 1558 case 0x02: 1559 product_str = "LSISAS1064E B1"; 1560 break; 1561 case 0x04: 1562 product_str = "LSISAS1064E B2"; 1563 break; 1564 case 0x08: 1565 product_str = "LSISAS1064E B3"; 1566 break; 1567 default: 1568 product_str = "LSISAS1064E"; 1569 break; 1570 } 1571 break; 1572 case MPI_MANUFACTPAGE_DEVID_SAS1068: 1573 switch (revision) 1574 { 1575 case 0x00: 1576 product_str = "LSISAS1068 A0"; 1577 break; 1578 case 0x01: 1579 product_str = "LSISAS1068 B0"; 1580 break; 1581 case 0x02: 1582 product_str = "LSISAS1068 B1"; 1583 break; 1584 default: 1585 product_str = "LSISAS1068"; 1586 break; 1587 } 1588 break; 1589 case MPI_MANUFACTPAGE_DEVID_SAS1068E: 1590 switch (revision) 1591 { 1592 case 0x00: 1593 product_str = "LSISAS1068E A0"; 1594 break; 1595 case 0x01: 1596 product_str = "LSISAS1068E B0"; 1597 break; 1598 case 0x02: 1599 product_str = "LSISAS1068E B1"; 1600 break; 1601 case 0x04: 1602 product_str = "LSISAS1068E B2"; 1603 break; 1604 case 0x08: 1605 product_str = "LSISAS1068E B3"; 1606 break; 1607 default: 1608 product_str = "LSISAS1068E"; 1609 break; 1610 } 1611 break; 1612 case MPI_MANUFACTPAGE_DEVID_SAS1078: 1613 switch (revision) 1614 { 1615 case 0x00: 1616 product_str = "LSISAS1078 A0"; 1617 break; 1618 case 0x01: 1619 product_str = "LSISAS1078 B0"; 1620 break; 1621 case 0x02: 1622 product_str = "LSISAS1078 C0"; 1623 break; 1624 case 0x03: 1625 product_str = "LSISAS1078 C1"; 1626 break; 1627 case 0x04: 1628 product_str = "LSISAS1078 C2"; 1629 break; 1630 default: 1631 product_str = "LSISAS1078"; 1632 break; 1633 } 1634 break; 1635 } 1636 1637 out: 1638 if (product_str) 1639 sprintf(prod_name, "%s", product_str); 1640 } 1641 1642 /** 1643 * mpt_mapresources - map in memory mapped io 1644 * @ioc: Pointer to pointer to IOC adapter 1645 * 1646 **/ 1647 static int 1648 mpt_mapresources(MPT_ADAPTER *ioc) 1649 { 1650 u8 __iomem *mem; 1651 int ii; 1652 resource_size_t mem_phys; 1653 unsigned long port; 1654 u32 msize; 1655 u32 psize; 1656 int r = -ENODEV; 1657 struct pci_dev *pdev; 1658 1659 pdev = ioc->pcidev; 1660 ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM); 1661 if (pci_enable_device_mem(pdev)) { 1662 printk(MYIOC_s_ERR_FMT "pci_enable_device_mem() " 1663 "failed\n", ioc->name); 1664 return r; 1665 } 1666 if (pci_request_selected_regions(pdev, ioc->bars, "mpt")) { 1667 printk(MYIOC_s_ERR_FMT "pci_request_selected_regions() with " 1668 "MEM failed\n", ioc->name); 1669 return r; 1670 } 1671 1672 if (sizeof(dma_addr_t) > 4) { 1673 const uint64_t required_mask = dma_get_required_mask 1674 (&pdev->dev); 1675 if (required_mask > DMA_BIT_MASK(32) 1676 && !pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) 1677 && !pci_set_consistent_dma_mask(pdev, 1678 DMA_BIT_MASK(64))) { 1679 ioc->dma_mask = DMA_BIT_MASK(64); 1680 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT 1681 ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n", 1682 ioc->name)); 1683 } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) 1684 && !pci_set_consistent_dma_mask(pdev, 1685 DMA_BIT_MASK(32))) { 1686 ioc->dma_mask = DMA_BIT_MASK(32); 1687 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT 1688 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n", 1689 ioc->name)); 1690 } else { 1691 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n", 1692 ioc->name, pci_name(pdev)); 1693 pci_release_selected_regions(pdev, ioc->bars); 1694 return r; 1695 } 1696 } else { 1697 if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) 1698 && !pci_set_consistent_dma_mask(pdev, 1699 DMA_BIT_MASK(32))) { 1700 ioc->dma_mask = DMA_BIT_MASK(32); 1701 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT 1702 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n", 1703 ioc->name)); 1704 } else { 1705 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n", 1706 ioc->name, pci_name(pdev)); 1707 pci_release_selected_regions(pdev, ioc->bars); 1708 return r; 1709 } 1710 } 1711 1712 mem_phys = msize = 0; 1713 port = psize = 0; 1714 for (ii = 0; ii < DEVICE_COUNT_RESOURCE; ii++) { 1715 if (pci_resource_flags(pdev, ii) & PCI_BASE_ADDRESS_SPACE_IO) { 1716 if (psize) 1717 continue; 1718 /* Get I/O space! */ 1719 port = pci_resource_start(pdev, ii); 1720 psize = pci_resource_len(pdev, ii); 1721 } else { 1722 if (msize) 1723 continue; 1724 /* Get memmap */ 1725 mem_phys = pci_resource_start(pdev, ii); 1726 msize = pci_resource_len(pdev, ii); 1727 } 1728 } 1729 ioc->mem_size = msize; 1730 1731 mem = NULL; 1732 /* Get logical ptr for PciMem0 space */ 1733 /*mem = ioremap(mem_phys, msize);*/ 1734 mem = ioremap(mem_phys, msize); 1735 if (mem == NULL) { 1736 printk(MYIOC_s_ERR_FMT ": ERROR - Unable to map adapter" 1737 " memory!\n", ioc->name); 1738 pci_release_selected_regions(pdev, ioc->bars); 1739 return -EINVAL; 1740 } 1741 ioc->memmap = mem; 1742 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %llx\n", 1743 ioc->name, mem, (unsigned long long)mem_phys)); 1744 1745 ioc->mem_phys = mem_phys; 1746 ioc->chip = (SYSIF_REGS __iomem *)mem; 1747 1748 /* Save Port IO values in case we need to do downloadboot */ 1749 ioc->pio_mem_phys = port; 1750 ioc->pio_chip = (SYSIF_REGS __iomem *)port; 1751 1752 return 0; 1753 } 1754 1755 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1756 /** 1757 * mpt_attach - Install a PCI intelligent MPT adapter. 1758 * @pdev: Pointer to pci_dev structure 1759 * @id: PCI device ID information 1760 * 1761 * This routine performs all the steps necessary to bring the IOC of 1762 * a MPT adapter to a OPERATIONAL state. This includes registering 1763 * memory regions, registering the interrupt, and allocating request 1764 * and reply memory pools. 1765 * 1766 * This routine also pre-fetches the LAN MAC address of a Fibre Channel 1767 * MPT adapter. 1768 * 1769 * Returns 0 for success, non-zero for failure. 1770 * 1771 * TODO: Add support for polled controllers 1772 */ 1773 int 1774 mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) 1775 { 1776 MPT_ADAPTER *ioc; 1777 u8 cb_idx; 1778 int r = -ENODEV; 1779 u8 pcixcmd; 1780 static int mpt_ids = 0; 1781 #ifdef CONFIG_PROC_FS 1782 struct proc_dir_entry *dent; 1783 #endif 1784 1785 ioc = kzalloc(sizeof(MPT_ADAPTER), GFP_ATOMIC); 1786 if (ioc == NULL) { 1787 printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n"); 1788 return -ENOMEM; 1789 } 1790 1791 ioc->id = mpt_ids++; 1792 sprintf(ioc->name, "ioc%d", ioc->id); 1793 dinitprintk(ioc, printk(KERN_WARNING MYNAM ": mpt_adapter_install\n")); 1794 1795 /* 1796 * set initial debug level 1797 * (refer to mptdebug.h) 1798 * 1799 */ 1800 ioc->debug_level = mpt_debug_level; 1801 if (mpt_debug_level) 1802 printk(KERN_INFO "mpt_debug_level=%xh\n", mpt_debug_level); 1803 1804 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": mpt_adapter_install\n", ioc->name)); 1805 1806 ioc->pcidev = pdev; 1807 if (mpt_mapresources(ioc)) { 1808 kfree(ioc); 1809 return r; 1810 } 1811 1812 /* 1813 * Setting up proper handlers for scatter gather handling 1814 */ 1815 if (ioc->dma_mask == DMA_BIT_MASK(64)) { 1816 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) 1817 ioc->add_sge = &mpt_add_sge_64bit_1078; 1818 else 1819 ioc->add_sge = &mpt_add_sge_64bit; 1820 ioc->add_chain = &mpt_add_chain_64bit; 1821 ioc->sg_addr_size = 8; 1822 } else { 1823 ioc->add_sge = &mpt_add_sge; 1824 ioc->add_chain = &mpt_add_chain; 1825 ioc->sg_addr_size = 4; 1826 } 1827 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size; 1828 1829 ioc->alloc_total = sizeof(MPT_ADAPTER); 1830 ioc->req_sz = MPT_DEFAULT_FRAME_SIZE; /* avoid div by zero! */ 1831 ioc->reply_sz = MPT_REPLY_FRAME_SIZE; 1832 1833 1834 spin_lock_init(&ioc->taskmgmt_lock); 1835 mutex_init(&ioc->internal_cmds.mutex); 1836 init_completion(&ioc->internal_cmds.done); 1837 mutex_init(&ioc->mptbase_cmds.mutex); 1838 init_completion(&ioc->mptbase_cmds.done); 1839 mutex_init(&ioc->taskmgmt_cmds.mutex); 1840 init_completion(&ioc->taskmgmt_cmds.done); 1841 1842 /* Initialize the event logging. 1843 */ 1844 ioc->eventTypes = 0; /* None */ 1845 ioc->eventContext = 0; 1846 ioc->eventLogSize = 0; 1847 ioc->events = NULL; 1848 1849 #ifdef MFCNT 1850 ioc->mfcnt = 0; 1851 #endif 1852 1853 ioc->sh = NULL; 1854 ioc->cached_fw = NULL; 1855 1856 /* Initialize SCSI Config Data structure 1857 */ 1858 memset(&ioc->spi_data, 0, sizeof(SpiCfgData)); 1859 1860 /* Initialize the fc rport list head. 1861 */ 1862 INIT_LIST_HEAD(&ioc->fc_rports); 1863 1864 /* Find lookup slot. */ 1865 INIT_LIST_HEAD(&ioc->list); 1866 1867 1868 /* Initialize workqueue */ 1869 INIT_DELAYED_WORK(&ioc->fault_reset_work, mpt_fault_reset_work); 1870 1871 snprintf(ioc->reset_work_q_name, MPT_KOBJ_NAME_LEN, 1872 "mpt_poll_%d", ioc->id); 1873 ioc->reset_work_q = 1874 create_singlethread_workqueue(ioc->reset_work_q_name); 1875 if (!ioc->reset_work_q) { 1876 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n", 1877 ioc->name); 1878 pci_release_selected_regions(pdev, ioc->bars); 1879 kfree(ioc); 1880 return -ENOMEM; 1881 } 1882 1883 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "facts @ %p, pfacts[0] @ %p\n", 1884 ioc->name, &ioc->facts, &ioc->pfacts[0])); 1885 1886 mpt_get_product_name(pdev->vendor, pdev->device, pdev->revision, 1887 ioc->prod_name); 1888 1889 switch (pdev->device) 1890 { 1891 case MPI_MANUFACTPAGE_DEVICEID_FC939X: 1892 case MPI_MANUFACTPAGE_DEVICEID_FC949X: 1893 ioc->errata_flag_1064 = 1; 1894 case MPI_MANUFACTPAGE_DEVICEID_FC909: 1895 case MPI_MANUFACTPAGE_DEVICEID_FC929: 1896 case MPI_MANUFACTPAGE_DEVICEID_FC919: 1897 case MPI_MANUFACTPAGE_DEVICEID_FC949E: 1898 ioc->bus_type = FC; 1899 break; 1900 1901 case MPI_MANUFACTPAGE_DEVICEID_FC929X: 1902 if (pdev->revision < XL_929) { 1903 /* 929X Chip Fix. Set Split transactions level 1904 * for PCIX. Set MOST bits to zero. 1905 */ 1906 pci_read_config_byte(pdev, 0x6a, &pcixcmd); 1907 pcixcmd &= 0x8F; 1908 pci_write_config_byte(pdev, 0x6a, pcixcmd); 1909 } else { 1910 /* 929XL Chip Fix. Set MMRBC to 0x08. 1911 */ 1912 pci_read_config_byte(pdev, 0x6a, &pcixcmd); 1913 pcixcmd |= 0x08; 1914 pci_write_config_byte(pdev, 0x6a, pcixcmd); 1915 } 1916 ioc->bus_type = FC; 1917 break; 1918 1919 case MPI_MANUFACTPAGE_DEVICEID_FC919X: 1920 /* 919X Chip Fix. Set Split transactions level 1921 * for PCIX. Set MOST bits to zero. 1922 */ 1923 pci_read_config_byte(pdev, 0x6a, &pcixcmd); 1924 pcixcmd &= 0x8F; 1925 pci_write_config_byte(pdev, 0x6a, pcixcmd); 1926 ioc->bus_type = FC; 1927 break; 1928 1929 case MPI_MANUFACTPAGE_DEVID_53C1030: 1930 /* 1030 Chip Fix. Disable Split transactions 1931 * for PCIX. Set MOST bits to zero if Rev < C0( = 8). 1932 */ 1933 if (pdev->revision < C0_1030) { 1934 pci_read_config_byte(pdev, 0x6a, &pcixcmd); 1935 pcixcmd &= 0x8F; 1936 pci_write_config_byte(pdev, 0x6a, pcixcmd); 1937 } 1938 1939 case MPI_MANUFACTPAGE_DEVID_1030_53C1035: 1940 ioc->bus_type = SPI; 1941 break; 1942 1943 case MPI_MANUFACTPAGE_DEVID_SAS1064: 1944 case MPI_MANUFACTPAGE_DEVID_SAS1068: 1945 ioc->errata_flag_1064 = 1; 1946 ioc->bus_type = SAS; 1947 break; 1948 1949 case MPI_MANUFACTPAGE_DEVID_SAS1064E: 1950 case MPI_MANUFACTPAGE_DEVID_SAS1068E: 1951 case MPI_MANUFACTPAGE_DEVID_SAS1078: 1952 ioc->bus_type = SAS; 1953 break; 1954 } 1955 1956 1957 switch (ioc->bus_type) { 1958 1959 case SAS: 1960 ioc->msi_enable = mpt_msi_enable_sas; 1961 break; 1962 1963 case SPI: 1964 ioc->msi_enable = mpt_msi_enable_spi; 1965 break; 1966 1967 case FC: 1968 ioc->msi_enable = mpt_msi_enable_fc; 1969 break; 1970 1971 default: 1972 ioc->msi_enable = 0; 1973 break; 1974 } 1975 1976 ioc->fw_events_off = 1; 1977 1978 if (ioc->errata_flag_1064) 1979 pci_disable_io_access(pdev); 1980 1981 spin_lock_init(&ioc->FreeQlock); 1982 1983 /* Disable all! */ 1984 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); 1985 ioc->active = 0; 1986 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 1987 1988 /* Set IOC ptr in the pcidev's driver data. */ 1989 pci_set_drvdata(ioc->pcidev, ioc); 1990 1991 /* Set lookup ptr. */ 1992 list_add_tail(&ioc->list, &ioc_list); 1993 1994 /* Check for "bound ports" (929, 929X, 1030, 1035) to reduce redundant resets. 1995 */ 1996 mpt_detect_bound_ports(ioc, pdev); 1997 1998 INIT_LIST_HEAD(&ioc->fw_event_list); 1999 spin_lock_init(&ioc->fw_event_lock); 2000 snprintf(ioc->fw_event_q_name, MPT_KOBJ_NAME_LEN, "mpt/%d", ioc->id); 2001 ioc->fw_event_q = create_singlethread_workqueue(ioc->fw_event_q_name); 2002 2003 if ((r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP, 2004 CAN_SLEEP)) != 0){ 2005 printk(MYIOC_s_ERR_FMT "didn't initialize properly! (%d)\n", 2006 ioc->name, r); 2007 2008 list_del(&ioc->list); 2009 if (ioc->alt_ioc) 2010 ioc->alt_ioc->alt_ioc = NULL; 2011 iounmap(ioc->memmap); 2012 if (r != -5) 2013 pci_release_selected_regions(pdev, ioc->bars); 2014 2015 destroy_workqueue(ioc->reset_work_q); 2016 ioc->reset_work_q = NULL; 2017 2018 kfree(ioc); 2019 pci_set_drvdata(pdev, NULL); 2020 return r; 2021 } 2022 2023 /* call per device driver probe entry point */ 2024 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) { 2025 if(MptDeviceDriverHandlers[cb_idx] && 2026 MptDeviceDriverHandlers[cb_idx]->probe) { 2027 MptDeviceDriverHandlers[cb_idx]->probe(pdev,id); 2028 } 2029 } 2030 2031 #ifdef CONFIG_PROC_FS 2032 /* 2033 * Create "/proc/mpt/iocN" subdirectory entry for each MPT adapter. 2034 */ 2035 dent = proc_mkdir(ioc->name, mpt_proc_root_dir); 2036 if (dent) { 2037 proc_create_data("info", S_IRUGO, dent, &mpt_iocinfo_proc_fops, ioc); 2038 proc_create_data("summary", S_IRUGO, dent, &mpt_summary_proc_fops, ioc); 2039 } 2040 #endif 2041 2042 if (!ioc->alt_ioc) 2043 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work, 2044 msecs_to_jiffies(MPT_POLLING_INTERVAL)); 2045 2046 return 0; 2047 } 2048 2049 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2050 /** 2051 * mpt_detach - Remove a PCI intelligent MPT adapter. 2052 * @pdev: Pointer to pci_dev structure 2053 */ 2054 2055 void 2056 mpt_detach(struct pci_dev *pdev) 2057 { 2058 MPT_ADAPTER *ioc = pci_get_drvdata(pdev); 2059 char pname[32]; 2060 u8 cb_idx; 2061 unsigned long flags; 2062 struct workqueue_struct *wq; 2063 2064 /* 2065 * Stop polling ioc for fault condition 2066 */ 2067 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 2068 wq = ioc->reset_work_q; 2069 ioc->reset_work_q = NULL; 2070 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 2071 cancel_delayed_work(&ioc->fault_reset_work); 2072 destroy_workqueue(wq); 2073 2074 spin_lock_irqsave(&ioc->fw_event_lock, flags); 2075 wq = ioc->fw_event_q; 2076 ioc->fw_event_q = NULL; 2077 spin_unlock_irqrestore(&ioc->fw_event_lock, flags); 2078 destroy_workqueue(wq); 2079 2080 sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s/summary", ioc->name); 2081 remove_proc_entry(pname, NULL); 2082 sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s/info", ioc->name); 2083 remove_proc_entry(pname, NULL); 2084 sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s", ioc->name); 2085 remove_proc_entry(pname, NULL); 2086 2087 /* call per device driver remove entry point */ 2088 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) { 2089 if(MptDeviceDriverHandlers[cb_idx] && 2090 MptDeviceDriverHandlers[cb_idx]->remove) { 2091 MptDeviceDriverHandlers[cb_idx]->remove(pdev); 2092 } 2093 } 2094 2095 /* Disable interrupts! */ 2096 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); 2097 2098 ioc->active = 0; 2099 synchronize_irq(pdev->irq); 2100 2101 /* Clear any lingering interrupt */ 2102 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 2103 2104 CHIPREG_READ32(&ioc->chip->IntStatus); 2105 2106 mpt_adapter_dispose(ioc); 2107 2108 } 2109 2110 /************************************************************************** 2111 * Power Management 2112 */ 2113 #ifdef CONFIG_PM 2114 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2115 /** 2116 * mpt_suspend - Fusion MPT base driver suspend routine. 2117 * @pdev: Pointer to pci_dev structure 2118 * @state: new state to enter 2119 */ 2120 int 2121 mpt_suspend(struct pci_dev *pdev, pm_message_t state) 2122 { 2123 u32 device_state; 2124 MPT_ADAPTER *ioc = pci_get_drvdata(pdev); 2125 2126 device_state = pci_choose_state(pdev, state); 2127 printk(MYIOC_s_INFO_FMT "pci-suspend: pdev=0x%p, slot=%s, Entering " 2128 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev), 2129 device_state); 2130 2131 /* put ioc into READY_STATE */ 2132 if(SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, CAN_SLEEP)) { 2133 printk(MYIOC_s_ERR_FMT 2134 "pci-suspend: IOC msg unit reset failed!\n", ioc->name); 2135 } 2136 2137 /* disable interrupts */ 2138 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); 2139 ioc->active = 0; 2140 2141 /* Clear any lingering interrupt */ 2142 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 2143 2144 free_irq(ioc->pci_irq, ioc); 2145 if (ioc->msi_enable) 2146 pci_disable_msi(ioc->pcidev); 2147 ioc->pci_irq = -1; 2148 pci_save_state(pdev); 2149 pci_disable_device(pdev); 2150 pci_release_selected_regions(pdev, ioc->bars); 2151 pci_set_power_state(pdev, device_state); 2152 return 0; 2153 } 2154 2155 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2156 /** 2157 * mpt_resume - Fusion MPT base driver resume routine. 2158 * @pdev: Pointer to pci_dev structure 2159 */ 2160 int 2161 mpt_resume(struct pci_dev *pdev) 2162 { 2163 MPT_ADAPTER *ioc = pci_get_drvdata(pdev); 2164 u32 device_state = pdev->current_state; 2165 int recovery_state; 2166 int err; 2167 2168 printk(MYIOC_s_INFO_FMT "pci-resume: pdev=0x%p, slot=%s, Previous " 2169 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev), 2170 device_state); 2171 2172 pci_set_power_state(pdev, PCI_D0); 2173 pci_enable_wake(pdev, PCI_D0, 0); 2174 pci_restore_state(pdev); 2175 ioc->pcidev = pdev; 2176 err = mpt_mapresources(ioc); 2177 if (err) 2178 return err; 2179 2180 if (ioc->dma_mask == DMA_BIT_MASK(64)) { 2181 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) 2182 ioc->add_sge = &mpt_add_sge_64bit_1078; 2183 else 2184 ioc->add_sge = &mpt_add_sge_64bit; 2185 ioc->add_chain = &mpt_add_chain_64bit; 2186 ioc->sg_addr_size = 8; 2187 } else { 2188 2189 ioc->add_sge = &mpt_add_sge; 2190 ioc->add_chain = &mpt_add_chain; 2191 ioc->sg_addr_size = 4; 2192 } 2193 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size; 2194 2195 printk(MYIOC_s_INFO_FMT "pci-resume: ioc-state=0x%x,doorbell=0x%x\n", 2196 ioc->name, (mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT), 2197 CHIPREG_READ32(&ioc->chip->Doorbell)); 2198 2199 /* 2200 * Errata workaround for SAS pci express: 2201 * Upon returning to the D0 state, the contents of the doorbell will be 2202 * stale data, and this will incorrectly signal to the host driver that 2203 * the firmware is ready to process mpt commands. The workaround is 2204 * to issue a diagnostic reset. 2205 */ 2206 if (ioc->bus_type == SAS && (pdev->device == 2207 MPI_MANUFACTPAGE_DEVID_SAS1068E || pdev->device == 2208 MPI_MANUFACTPAGE_DEVID_SAS1064E)) { 2209 if (KickStart(ioc, 1, CAN_SLEEP) < 0) { 2210 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover\n", 2211 ioc->name); 2212 goto out; 2213 } 2214 } 2215 2216 /* bring ioc to operational state */ 2217 printk(MYIOC_s_INFO_FMT "Sending mpt_do_ioc_recovery\n", ioc->name); 2218 recovery_state = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP, 2219 CAN_SLEEP); 2220 if (recovery_state != 0) 2221 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover, " 2222 "error:[%x]\n", ioc->name, recovery_state); 2223 else 2224 printk(MYIOC_s_INFO_FMT 2225 "pci-resume: success\n", ioc->name); 2226 out: 2227 return 0; 2228 2229 } 2230 #endif 2231 2232 static int 2233 mpt_signal_reset(u8 index, MPT_ADAPTER *ioc, int reset_phase) 2234 { 2235 if ((MptDriverClass[index] == MPTSPI_DRIVER && 2236 ioc->bus_type != SPI) || 2237 (MptDriverClass[index] == MPTFC_DRIVER && 2238 ioc->bus_type != FC) || 2239 (MptDriverClass[index] == MPTSAS_DRIVER && 2240 ioc->bus_type != SAS)) 2241 /* make sure we only call the relevant reset handler 2242 * for the bus */ 2243 return 0; 2244 return (MptResetHandlers[index])(ioc, reset_phase); 2245 } 2246 2247 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2248 /** 2249 * mpt_do_ioc_recovery - Initialize or recover MPT adapter. 2250 * @ioc: Pointer to MPT adapter structure 2251 * @reason: Event word / reason 2252 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay. 2253 * 2254 * This routine performs all the steps necessary to bring the IOC 2255 * to a OPERATIONAL state. 2256 * 2257 * This routine also pre-fetches the LAN MAC address of a Fibre Channel 2258 * MPT adapter. 2259 * 2260 * Returns: 2261 * 0 for success 2262 * -1 if failed to get board READY 2263 * -2 if READY but IOCFacts Failed 2264 * -3 if READY but PrimeIOCFifos Failed 2265 * -4 if READY but IOCInit Failed 2266 * -5 if failed to enable_device and/or request_selected_regions 2267 * -6 if failed to upload firmware 2268 */ 2269 static int 2270 mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) 2271 { 2272 int hard_reset_done = 0; 2273 int alt_ioc_ready = 0; 2274 int hard; 2275 int rc=0; 2276 int ii; 2277 int ret = 0; 2278 int reset_alt_ioc_active = 0; 2279 int irq_allocated = 0; 2280 u8 *a; 2281 2282 printk(MYIOC_s_INFO_FMT "Initiating %s\n", ioc->name, 2283 reason == MPT_HOSTEVENT_IOC_BRINGUP ? "bringup" : "recovery"); 2284 2285 /* Disable reply interrupts (also blocks FreeQ) */ 2286 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); 2287 ioc->active = 0; 2288 2289 if (ioc->alt_ioc) { 2290 if (ioc->alt_ioc->active || 2291 reason == MPT_HOSTEVENT_IOC_RECOVER) { 2292 reset_alt_ioc_active = 1; 2293 /* Disable alt-IOC's reply interrupts 2294 * (and FreeQ) for a bit 2295 **/ 2296 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, 2297 0xFFFFFFFF); 2298 ioc->alt_ioc->active = 0; 2299 } 2300 } 2301 2302 hard = 1; 2303 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) 2304 hard = 0; 2305 2306 if ((hard_reset_done = MakeIocReady(ioc, hard, sleepFlag)) < 0) { 2307 if (hard_reset_done == -4) { 2308 printk(MYIOC_s_WARN_FMT "Owned by PEER..skipping!\n", 2309 ioc->name); 2310 2311 if (reset_alt_ioc_active && ioc->alt_ioc) { 2312 /* (re)Enable alt-IOC! (reply interrupt, FreeQ) */ 2313 dprintk(ioc, printk(MYIOC_s_INFO_FMT 2314 "alt_ioc reply irq re-enabled\n", ioc->alt_ioc->name)); 2315 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, MPI_HIM_DIM); 2316 ioc->alt_ioc->active = 1; 2317 } 2318 2319 } else { 2320 printk(MYIOC_s_WARN_FMT 2321 "NOT READY WARNING!\n", ioc->name); 2322 } 2323 ret = -1; 2324 goto out; 2325 } 2326 2327 /* hard_reset_done = 0 if a soft reset was performed 2328 * and 1 if a hard reset was performed. 2329 */ 2330 if (hard_reset_done && reset_alt_ioc_active && ioc->alt_ioc) { 2331 if ((rc = MakeIocReady(ioc->alt_ioc, 0, sleepFlag)) == 0) 2332 alt_ioc_ready = 1; 2333 else 2334 printk(MYIOC_s_WARN_FMT 2335 ": alt-ioc Not ready WARNING!\n", 2336 ioc->alt_ioc->name); 2337 } 2338 2339 for (ii=0; ii<5; ii++) { 2340 /* Get IOC facts! Allow 5 retries */ 2341 if ((rc = GetIocFacts(ioc, sleepFlag, reason)) == 0) 2342 break; 2343 } 2344 2345 2346 if (ii == 5) { 2347 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2348 "Retry IocFacts failed rc=%x\n", ioc->name, rc)); 2349 ret = -2; 2350 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) { 2351 MptDisplayIocCapabilities(ioc); 2352 } 2353 2354 if (alt_ioc_ready) { 2355 if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason)) != 0) { 2356 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2357 "Initial Alt IocFacts failed rc=%x\n", 2358 ioc->name, rc)); 2359 /* Retry - alt IOC was initialized once 2360 */ 2361 rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason); 2362 } 2363 if (rc) { 2364 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2365 "Retry Alt IocFacts failed rc=%x\n", ioc->name, rc)); 2366 alt_ioc_ready = 0; 2367 reset_alt_ioc_active = 0; 2368 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) { 2369 MptDisplayIocCapabilities(ioc->alt_ioc); 2370 } 2371 } 2372 2373 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP) && 2374 (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)) { 2375 pci_release_selected_regions(ioc->pcidev, ioc->bars); 2376 ioc->bars = pci_select_bars(ioc->pcidev, IORESOURCE_MEM | 2377 IORESOURCE_IO); 2378 if (pci_enable_device(ioc->pcidev)) 2379 return -5; 2380 if (pci_request_selected_regions(ioc->pcidev, ioc->bars, 2381 "mpt")) 2382 return -5; 2383 } 2384 2385 /* 2386 * Device is reset now. It must have de-asserted the interrupt line 2387 * (if it was asserted) and it should be safe to register for the 2388 * interrupt now. 2389 */ 2390 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) { 2391 ioc->pci_irq = -1; 2392 if (ioc->pcidev->irq) { 2393 if (ioc->msi_enable && !pci_enable_msi(ioc->pcidev)) 2394 printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n", 2395 ioc->name); 2396 else 2397 ioc->msi_enable = 0; 2398 rc = request_irq(ioc->pcidev->irq, mpt_interrupt, 2399 IRQF_SHARED, ioc->name, ioc); 2400 if (rc < 0) { 2401 printk(MYIOC_s_ERR_FMT "Unable to allocate " 2402 "interrupt %d!\n", 2403 ioc->name, ioc->pcidev->irq); 2404 if (ioc->msi_enable) 2405 pci_disable_msi(ioc->pcidev); 2406 ret = -EBUSY; 2407 goto out; 2408 } 2409 irq_allocated = 1; 2410 ioc->pci_irq = ioc->pcidev->irq; 2411 pci_set_master(ioc->pcidev); /* ?? */ 2412 pci_set_drvdata(ioc->pcidev, ioc); 2413 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT 2414 "installed at interrupt %d\n", ioc->name, 2415 ioc->pcidev->irq)); 2416 } 2417 } 2418 2419 /* Prime reply & request queues! 2420 * (mucho alloc's) Must be done prior to 2421 * init as upper addresses are needed for init. 2422 * If fails, continue with alt-ioc processing 2423 */ 2424 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "PrimeIocFifos\n", 2425 ioc->name)); 2426 if ((ret == 0) && ((rc = PrimeIocFifos(ioc)) != 0)) 2427 ret = -3; 2428 2429 /* May need to check/upload firmware & data here! 2430 * If fails, continue with alt-ioc processing 2431 */ 2432 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "SendIocInit\n", 2433 ioc->name)); 2434 if ((ret == 0) && ((rc = SendIocInit(ioc, sleepFlag)) != 0)) 2435 ret = -4; 2436 // NEW! 2437 if (alt_ioc_ready && ((rc = PrimeIocFifos(ioc->alt_ioc)) != 0)) { 2438 printk(MYIOC_s_WARN_FMT 2439 ": alt-ioc (%d) FIFO mgmt alloc WARNING!\n", 2440 ioc->alt_ioc->name, rc); 2441 alt_ioc_ready = 0; 2442 reset_alt_ioc_active = 0; 2443 } 2444 2445 if (alt_ioc_ready) { 2446 if ((rc = SendIocInit(ioc->alt_ioc, sleepFlag)) != 0) { 2447 alt_ioc_ready = 0; 2448 reset_alt_ioc_active = 0; 2449 printk(MYIOC_s_WARN_FMT 2450 ": alt-ioc: (%d) init failure WARNING!\n", 2451 ioc->alt_ioc->name, rc); 2452 } 2453 } 2454 2455 if (reason == MPT_HOSTEVENT_IOC_BRINGUP){ 2456 if (ioc->upload_fw) { 2457 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2458 "firmware upload required!\n", ioc->name)); 2459 2460 /* Controller is not operational, cannot do upload 2461 */ 2462 if (ret == 0) { 2463 rc = mpt_do_upload(ioc, sleepFlag); 2464 if (rc == 0) { 2465 if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) { 2466 /* 2467 * Maintain only one pointer to FW memory 2468 * so there will not be two attempt to 2469 * downloadboot onboard dual function 2470 * chips (mpt_adapter_disable, 2471 * mpt_diag_reset) 2472 */ 2473 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2474 "mpt_upload: alt_%s has cached_fw=%p \n", 2475 ioc->name, ioc->alt_ioc->name, ioc->alt_ioc->cached_fw)); 2476 ioc->cached_fw = NULL; 2477 } 2478 } else { 2479 printk(MYIOC_s_WARN_FMT 2480 "firmware upload failure!\n", ioc->name); 2481 ret = -6; 2482 } 2483 } 2484 } 2485 } 2486 2487 /* Enable MPT base driver management of EventNotification 2488 * and EventAck handling. 2489 */ 2490 if ((ret == 0) && (!ioc->facts.EventState)) { 2491 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT 2492 "SendEventNotification\n", 2493 ioc->name)); 2494 ret = SendEventNotification(ioc, 1, sleepFlag); /* 1=Enable */ 2495 } 2496 2497 if (ioc->alt_ioc && alt_ioc_ready && !ioc->alt_ioc->facts.EventState) 2498 rc = SendEventNotification(ioc->alt_ioc, 1, sleepFlag); 2499 2500 if (ret == 0) { 2501 /* Enable! (reply interrupt) */ 2502 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM); 2503 ioc->active = 1; 2504 } 2505 if (rc == 0) { /* alt ioc */ 2506 if (reset_alt_ioc_active && ioc->alt_ioc) { 2507 /* (re)Enable alt-IOC! (reply interrupt) */ 2508 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "alt-ioc" 2509 "reply irq re-enabled\n", 2510 ioc->alt_ioc->name)); 2511 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, 2512 MPI_HIM_DIM); 2513 ioc->alt_ioc->active = 1; 2514 } 2515 } 2516 2517 2518 /* Add additional "reason" check before call to GetLanConfigPages 2519 * (combined with GetIoUnitPage2 call). This prevents a somewhat 2520 * recursive scenario; GetLanConfigPages times out, timer expired 2521 * routine calls HardResetHandler, which calls into here again, 2522 * and we try GetLanConfigPages again... 2523 */ 2524 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) { 2525 2526 /* 2527 * Initialize link list for inactive raid volumes. 2528 */ 2529 mutex_init(&ioc->raid_data.inactive_list_mutex); 2530 INIT_LIST_HEAD(&ioc->raid_data.inactive_list); 2531 2532 switch (ioc->bus_type) { 2533 2534 case SAS: 2535 /* clear persistency table */ 2536 if(ioc->facts.IOCExceptions & 2537 MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL) { 2538 ret = mptbase_sas_persist_operation(ioc, 2539 MPI_SAS_OP_CLEAR_NOT_PRESENT); 2540 if(ret != 0) 2541 goto out; 2542 } 2543 2544 /* Find IM volumes 2545 */ 2546 mpt_findImVolumes(ioc); 2547 2548 /* Check, and possibly reset, the coalescing value 2549 */ 2550 mpt_read_ioc_pg_1(ioc); 2551 2552 break; 2553 2554 case FC: 2555 if ((ioc->pfacts[0].ProtocolFlags & 2556 MPI_PORTFACTS_PROTOCOL_LAN) && 2557 (ioc->lan_cnfg_page0.Header.PageLength == 0)) { 2558 /* 2559 * Pre-fetch the ports LAN MAC address! 2560 * (LANPage1_t stuff) 2561 */ 2562 (void) GetLanConfigPages(ioc); 2563 a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow; 2564 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2565 "LanAddr = %02X:%02X:%02X" 2566 ":%02X:%02X:%02X\n", 2567 ioc->name, a[5], a[4], 2568 a[3], a[2], a[1], a[0])); 2569 } 2570 break; 2571 2572 case SPI: 2573 /* Get NVRAM and adapter maximums from SPP 0 and 2 2574 */ 2575 mpt_GetScsiPortSettings(ioc, 0); 2576 2577 /* Get version and length of SDP 1 2578 */ 2579 mpt_readScsiDevicePageHeaders(ioc, 0); 2580 2581 /* Find IM volumes 2582 */ 2583 if (ioc->facts.MsgVersion >= MPI_VERSION_01_02) 2584 mpt_findImVolumes(ioc); 2585 2586 /* Check, and possibly reset, the coalescing value 2587 */ 2588 mpt_read_ioc_pg_1(ioc); 2589 2590 mpt_read_ioc_pg_4(ioc); 2591 2592 break; 2593 } 2594 2595 GetIoUnitPage2(ioc); 2596 mpt_get_manufacturing_pg_0(ioc); 2597 } 2598 2599 out: 2600 if ((ret != 0) && irq_allocated) { 2601 free_irq(ioc->pci_irq, ioc); 2602 if (ioc->msi_enable) 2603 pci_disable_msi(ioc->pcidev); 2604 } 2605 return ret; 2606 } 2607 2608 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2609 /** 2610 * mpt_detect_bound_ports - Search for matching PCI bus/dev_function 2611 * @ioc: Pointer to MPT adapter structure 2612 * @pdev: Pointer to (struct pci_dev) structure 2613 * 2614 * Search for PCI bus/dev_function which matches 2615 * PCI bus/dev_function (+/-1) for newly discovered 929, 2616 * 929X, 1030 or 1035. 2617 * 2618 * If match on PCI dev_function +/-1 is found, bind the two MPT adapters 2619 * using alt_ioc pointer fields in their %MPT_ADAPTER structures. 2620 */ 2621 static void 2622 mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev) 2623 { 2624 struct pci_dev *peer=NULL; 2625 unsigned int slot = PCI_SLOT(pdev->devfn); 2626 unsigned int func = PCI_FUNC(pdev->devfn); 2627 MPT_ADAPTER *ioc_srch; 2628 2629 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PCI device %s devfn=%x/%x," 2630 " searching for devfn match on %x or %x\n", 2631 ioc->name, pci_name(pdev), pdev->bus->number, 2632 pdev->devfn, func-1, func+1)); 2633 2634 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func-1)); 2635 if (!peer) { 2636 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func+1)); 2637 if (!peer) 2638 return; 2639 } 2640 2641 list_for_each_entry(ioc_srch, &ioc_list, list) { 2642 struct pci_dev *_pcidev = ioc_srch->pcidev; 2643 if (_pcidev == peer) { 2644 /* Paranoia checks */ 2645 if (ioc->alt_ioc != NULL) { 2646 printk(MYIOC_s_WARN_FMT 2647 "Oops, already bound (%s <==> %s)!\n", 2648 ioc->name, ioc->name, ioc->alt_ioc->name); 2649 break; 2650 } else if (ioc_srch->alt_ioc != NULL) { 2651 printk(MYIOC_s_WARN_FMT 2652 "Oops, already bound (%s <==> %s)!\n", 2653 ioc_srch->name, ioc_srch->name, 2654 ioc_srch->alt_ioc->name); 2655 break; 2656 } 2657 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2658 "FOUND! binding %s <==> %s\n", 2659 ioc->name, ioc->name, ioc_srch->name)); 2660 ioc_srch->alt_ioc = ioc; 2661 ioc->alt_ioc = ioc_srch; 2662 } 2663 } 2664 pci_dev_put(peer); 2665 } 2666 2667 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2668 /** 2669 * mpt_adapter_disable - Disable misbehaving MPT adapter. 2670 * @ioc: Pointer to MPT adapter structure 2671 */ 2672 static void 2673 mpt_adapter_disable(MPT_ADAPTER *ioc) 2674 { 2675 int sz; 2676 int ret; 2677 2678 if (ioc->cached_fw != NULL) { 2679 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2680 "%s: Pushing FW onto adapter\n", __func__, ioc->name)); 2681 if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *) 2682 ioc->cached_fw, CAN_SLEEP)) < 0) { 2683 printk(MYIOC_s_WARN_FMT 2684 ": firmware downloadboot failure (%d)!\n", 2685 ioc->name, ret); 2686 } 2687 } 2688 2689 /* 2690 * Put the controller into ready state (if its not already) 2691 */ 2692 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY) { 2693 if (!SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, 2694 CAN_SLEEP)) { 2695 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY) 2696 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit " 2697 "reset failed to put ioc in ready state!\n", 2698 ioc->name, __func__); 2699 } else 2700 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit reset " 2701 "failed!\n", ioc->name, __func__); 2702 } 2703 2704 2705 /* Disable adapter interrupts! */ 2706 synchronize_irq(ioc->pcidev->irq); 2707 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); 2708 ioc->active = 0; 2709 2710 /* Clear any lingering interrupt */ 2711 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 2712 CHIPREG_READ32(&ioc->chip->IntStatus); 2713 2714 if (ioc->alloc != NULL) { 2715 sz = ioc->alloc_sz; 2716 dexitprintk(ioc, printk(MYIOC_s_INFO_FMT "free @ %p, sz=%d bytes\n", 2717 ioc->name, ioc->alloc, ioc->alloc_sz)); 2718 pci_free_consistent(ioc->pcidev, sz, 2719 ioc->alloc, ioc->alloc_dma); 2720 ioc->reply_frames = NULL; 2721 ioc->req_frames = NULL; 2722 ioc->alloc = NULL; 2723 ioc->alloc_total -= sz; 2724 } 2725 2726 if (ioc->sense_buf_pool != NULL) { 2727 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC); 2728 pci_free_consistent(ioc->pcidev, sz, 2729 ioc->sense_buf_pool, ioc->sense_buf_pool_dma); 2730 ioc->sense_buf_pool = NULL; 2731 ioc->alloc_total -= sz; 2732 } 2733 2734 if (ioc->events != NULL){ 2735 sz = MPTCTL_EVENT_LOG_SIZE * sizeof(MPT_IOCTL_EVENTS); 2736 kfree(ioc->events); 2737 ioc->events = NULL; 2738 ioc->alloc_total -= sz; 2739 } 2740 2741 mpt_free_fw_memory(ioc); 2742 2743 kfree(ioc->spi_data.nvram); 2744 mpt_inactive_raid_list_free(ioc); 2745 kfree(ioc->raid_data.pIocPg2); 2746 kfree(ioc->raid_data.pIocPg3); 2747 ioc->spi_data.nvram = NULL; 2748 ioc->raid_data.pIocPg3 = NULL; 2749 2750 if (ioc->spi_data.pIocPg4 != NULL) { 2751 sz = ioc->spi_data.IocPg4Sz; 2752 pci_free_consistent(ioc->pcidev, sz, 2753 ioc->spi_data.pIocPg4, 2754 ioc->spi_data.IocPg4_dma); 2755 ioc->spi_data.pIocPg4 = NULL; 2756 ioc->alloc_total -= sz; 2757 } 2758 2759 if (ioc->ReqToChain != NULL) { 2760 kfree(ioc->ReqToChain); 2761 kfree(ioc->RequestNB); 2762 ioc->ReqToChain = NULL; 2763 } 2764 2765 kfree(ioc->ChainToChain); 2766 ioc->ChainToChain = NULL; 2767 2768 if (ioc->HostPageBuffer != NULL) { 2769 if((ret = mpt_host_page_access_control(ioc, 2770 MPI_DB_HPBAC_FREE_BUFFER, NO_SLEEP)) != 0) { 2771 printk(MYIOC_s_ERR_FMT 2772 ": %s: host page buffers free failed (%d)!\n", 2773 ioc->name, __func__, ret); 2774 } 2775 dexitprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2776 "HostPageBuffer free @ %p, sz=%d bytes\n", 2777 ioc->name, ioc->HostPageBuffer, 2778 ioc->HostPageBuffer_sz)); 2779 pci_free_consistent(ioc->pcidev, ioc->HostPageBuffer_sz, 2780 ioc->HostPageBuffer, ioc->HostPageBuffer_dma); 2781 ioc->HostPageBuffer = NULL; 2782 ioc->HostPageBuffer_sz = 0; 2783 ioc->alloc_total -= ioc->HostPageBuffer_sz; 2784 } 2785 2786 pci_set_drvdata(ioc->pcidev, NULL); 2787 } 2788 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2789 /** 2790 * mpt_adapter_dispose - Free all resources associated with an MPT adapter 2791 * @ioc: Pointer to MPT adapter structure 2792 * 2793 * This routine unregisters h/w resources and frees all alloc'd memory 2794 * associated with a MPT adapter structure. 2795 */ 2796 static void 2797 mpt_adapter_dispose(MPT_ADAPTER *ioc) 2798 { 2799 int sz_first, sz_last; 2800 2801 if (ioc == NULL) 2802 return; 2803 2804 sz_first = ioc->alloc_total; 2805 2806 mpt_adapter_disable(ioc); 2807 2808 if (ioc->pci_irq != -1) { 2809 free_irq(ioc->pci_irq, ioc); 2810 if (ioc->msi_enable) 2811 pci_disable_msi(ioc->pcidev); 2812 ioc->pci_irq = -1; 2813 } 2814 2815 if (ioc->memmap != NULL) { 2816 iounmap(ioc->memmap); 2817 ioc->memmap = NULL; 2818 } 2819 2820 pci_disable_device(ioc->pcidev); 2821 pci_release_selected_regions(ioc->pcidev, ioc->bars); 2822 2823 #if defined(CONFIG_MTRR) && 0 2824 if (ioc->mtrr_reg > 0) { 2825 mtrr_del(ioc->mtrr_reg, 0, 0); 2826 dprintk(ioc, printk(MYIOC_s_INFO_FMT "MTRR region de-registered\n", ioc->name)); 2827 } 2828 #endif 2829 2830 /* Zap the adapter lookup ptr! */ 2831 list_del(&ioc->list); 2832 2833 sz_last = ioc->alloc_total; 2834 dprintk(ioc, printk(MYIOC_s_INFO_FMT "free'd %d of %d bytes\n", 2835 ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first)); 2836 2837 if (ioc->alt_ioc) 2838 ioc->alt_ioc->alt_ioc = NULL; 2839 2840 kfree(ioc); 2841 } 2842 2843 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2844 /** 2845 * MptDisplayIocCapabilities - Disply IOC's capabilities. 2846 * @ioc: Pointer to MPT adapter structure 2847 */ 2848 static void 2849 MptDisplayIocCapabilities(MPT_ADAPTER *ioc) 2850 { 2851 int i = 0; 2852 2853 printk(KERN_INFO "%s: ", ioc->name); 2854 if (ioc->prod_name) 2855 printk("%s: ", ioc->prod_name); 2856 printk("Capabilities={"); 2857 2858 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_INITIATOR) { 2859 printk("Initiator"); 2860 i++; 2861 } 2862 2863 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) { 2864 printk("%sTarget", i ? "," : ""); 2865 i++; 2866 } 2867 2868 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) { 2869 printk("%sLAN", i ? "," : ""); 2870 i++; 2871 } 2872 2873 #if 0 2874 /* 2875 * This would probably evoke more questions than it's worth 2876 */ 2877 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) { 2878 printk("%sLogBusAddr", i ? "," : ""); 2879 i++; 2880 } 2881 #endif 2882 2883 printk("}\n"); 2884 } 2885 2886 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2887 /** 2888 * MakeIocReady - Get IOC to a READY state, using KickStart if needed. 2889 * @ioc: Pointer to MPT_ADAPTER structure 2890 * @force: Force hard KickStart of IOC 2891 * @sleepFlag: Specifies whether the process can sleep 2892 * 2893 * Returns: 2894 * 1 - DIAG reset and READY 2895 * 0 - READY initially OR soft reset and READY 2896 * -1 - Any failure on KickStart 2897 * -2 - Msg Unit Reset Failed 2898 * -3 - IO Unit Reset Failed 2899 * -4 - IOC owned by a PEER 2900 */ 2901 static int 2902 MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag) 2903 { 2904 u32 ioc_state; 2905 int statefault = 0; 2906 int cntdn; 2907 int hard_reset_done = 0; 2908 int r; 2909 int ii; 2910 int whoinit; 2911 2912 /* Get current [raw] IOC state */ 2913 ioc_state = mpt_GetIocState(ioc, 0); 2914 dhsprintk(ioc, printk(MYIOC_s_INFO_FMT "MakeIocReady [raw] state=%08x\n", ioc->name, ioc_state)); 2915 2916 /* 2917 * Check to see if IOC got left/stuck in doorbell handshake 2918 * grip of death. If so, hard reset the IOC. 2919 */ 2920 if (ioc_state & MPI_DOORBELL_ACTIVE) { 2921 statefault = 1; 2922 printk(MYIOC_s_WARN_FMT "Unexpected doorbell active!\n", 2923 ioc->name); 2924 } 2925 2926 /* Is it already READY? */ 2927 if (!statefault && 2928 ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)) { 2929 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT 2930 "IOC is in READY state\n", ioc->name)); 2931 return 0; 2932 } 2933 2934 /* 2935 * Check to see if IOC is in FAULT state. 2936 */ 2937 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) { 2938 statefault = 2; 2939 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state!!!\n", 2940 ioc->name); 2941 printk(MYIOC_s_WARN_FMT " FAULT code = %04xh\n", 2942 ioc->name, ioc_state & MPI_DOORBELL_DATA_MASK); 2943 } 2944 2945 /* 2946 * Hmmm... Did it get left operational? 2947 */ 2948 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_OPERATIONAL) { 2949 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOC operational unexpected\n", 2950 ioc->name)); 2951 2952 /* Check WhoInit. 2953 * If PCI Peer, exit. 2954 * Else, if no fault conditions are present, issue a MessageUnitReset 2955 * Else, fall through to KickStart case 2956 */ 2957 whoinit = (ioc_state & MPI_DOORBELL_WHO_INIT_MASK) >> MPI_DOORBELL_WHO_INIT_SHIFT; 2958 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT 2959 "whoinit 0x%x statefault %d force %d\n", 2960 ioc->name, whoinit, statefault, force)); 2961 if (whoinit == MPI_WHOINIT_PCI_PEER) 2962 return -4; 2963 else { 2964 if ((statefault == 0 ) && (force == 0)) { 2965 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) == 0) 2966 return 0; 2967 } 2968 statefault = 3; 2969 } 2970 } 2971 2972 hard_reset_done = KickStart(ioc, statefault||force, sleepFlag); 2973 if (hard_reset_done < 0) 2974 return -1; 2975 2976 /* 2977 * Loop here waiting for IOC to come READY. 2978 */ 2979 ii = 0; 2980 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 5; /* 5 seconds */ 2981 2982 while ((ioc_state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) { 2983 if (ioc_state == MPI_IOC_STATE_OPERATIONAL) { 2984 /* 2985 * BIOS or previous driver load left IOC in OP state. 2986 * Reset messaging FIFOs. 2987 */ 2988 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) != 0) { 2989 printk(MYIOC_s_ERR_FMT "IOC msg unit reset failed!\n", ioc->name); 2990 return -2; 2991 } 2992 } else if (ioc_state == MPI_IOC_STATE_RESET) { 2993 /* 2994 * Something is wrong. Try to get IOC back 2995 * to a known state. 2996 */ 2997 if ((r = SendIocReset(ioc, MPI_FUNCTION_IO_UNIT_RESET, sleepFlag)) != 0) { 2998 printk(MYIOC_s_ERR_FMT "IO unit reset failed!\n", ioc->name); 2999 return -3; 3000 } 3001 } 3002 3003 ii++; cntdn--; 3004 if (!cntdn) { 3005 printk(MYIOC_s_ERR_FMT 3006 "Wait IOC_READY state (0x%x) timeout(%d)!\n", 3007 ioc->name, ioc_state, (int)((ii+5)/HZ)); 3008 return -ETIME; 3009 } 3010 3011 if (sleepFlag == CAN_SLEEP) { 3012 msleep(1); 3013 } else { 3014 mdelay (1); /* 1 msec delay */ 3015 } 3016 3017 } 3018 3019 if (statefault < 3) { 3020 printk(MYIOC_s_INFO_FMT "Recovered from %s\n", ioc->name, 3021 statefault == 1 ? "stuck handshake" : "IOC FAULT"); 3022 } 3023 3024 return hard_reset_done; 3025 } 3026 3027 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3028 /** 3029 * mpt_GetIocState - Get the current state of a MPT adapter. 3030 * @ioc: Pointer to MPT_ADAPTER structure 3031 * @cooked: Request raw or cooked IOC state 3032 * 3033 * Returns all IOC Doorbell register bits if cooked==0, else just the 3034 * Doorbell bits in MPI_IOC_STATE_MASK. 3035 */ 3036 u32 3037 mpt_GetIocState(MPT_ADAPTER *ioc, int cooked) 3038 { 3039 u32 s, sc; 3040 3041 /* Get! */ 3042 s = CHIPREG_READ32(&ioc->chip->Doorbell); 3043 sc = s & MPI_IOC_STATE_MASK; 3044 3045 /* Save! */ 3046 ioc->last_state = sc; 3047 3048 return cooked ? sc : s; 3049 } 3050 3051 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3052 /** 3053 * GetIocFacts - Send IOCFacts request to MPT adapter. 3054 * @ioc: Pointer to MPT_ADAPTER structure 3055 * @sleepFlag: Specifies whether the process can sleep 3056 * @reason: If recovery, only update facts. 3057 * 3058 * Returns 0 for success, non-zero for failure. 3059 */ 3060 static int 3061 GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason) 3062 { 3063 IOCFacts_t get_facts; 3064 IOCFactsReply_t *facts; 3065 int r; 3066 int req_sz; 3067 int reply_sz; 3068 int sz; 3069 u32 status, vv; 3070 u8 shiftFactor=1; 3071 3072 /* IOC *must* NOT be in RESET state! */ 3073 if (ioc->last_state == MPI_IOC_STATE_RESET) { 3074 printk(KERN_ERR MYNAM 3075 ": ERROR - Can't get IOCFacts, %s NOT READY! (%08x)\n", 3076 ioc->name, ioc->last_state); 3077 return -44; 3078 } 3079 3080 facts = &ioc->facts; 3081 3082 /* Destination (reply area)... */ 3083 reply_sz = sizeof(*facts); 3084 memset(facts, 0, reply_sz); 3085 3086 /* Request area (get_facts on the stack right now!) */ 3087 req_sz = sizeof(get_facts); 3088 memset(&get_facts, 0, req_sz); 3089 3090 get_facts.Function = MPI_FUNCTION_IOC_FACTS; 3091 /* Assert: All other get_facts fields are zero! */ 3092 3093 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3094 "Sending get IocFacts request req_sz=%d reply_sz=%d\n", 3095 ioc->name, req_sz, reply_sz)); 3096 3097 /* No non-zero fields in the get_facts request are greater than 3098 * 1 byte in size, so we can just fire it off as is. 3099 */ 3100 r = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_facts, 3101 reply_sz, (u16*)facts, 5 /*seconds*/, sleepFlag); 3102 if (r != 0) 3103 return r; 3104 3105 /* 3106 * Now byte swap (GRRR) the necessary fields before any further 3107 * inspection of reply contents. 3108 * 3109 * But need to do some sanity checks on MsgLength (byte) field 3110 * to make sure we don't zero IOC's req_sz! 3111 */ 3112 /* Did we get a valid reply? */ 3113 if (facts->MsgLength > offsetof(IOCFactsReply_t, RequestFrameSize)/sizeof(u32)) { 3114 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) { 3115 /* 3116 * If not been here, done that, save off first WhoInit value 3117 */ 3118 if (ioc->FirstWhoInit == WHOINIT_UNKNOWN) 3119 ioc->FirstWhoInit = facts->WhoInit; 3120 } 3121 3122 facts->MsgVersion = le16_to_cpu(facts->MsgVersion); 3123 facts->MsgContext = le32_to_cpu(facts->MsgContext); 3124 facts->IOCExceptions = le16_to_cpu(facts->IOCExceptions); 3125 facts->IOCStatus = le16_to_cpu(facts->IOCStatus); 3126 facts->IOCLogInfo = le32_to_cpu(facts->IOCLogInfo); 3127 status = le16_to_cpu(facts->IOCStatus) & MPI_IOCSTATUS_MASK; 3128 /* CHECKME! IOCStatus, IOCLogInfo */ 3129 3130 facts->ReplyQueueDepth = le16_to_cpu(facts->ReplyQueueDepth); 3131 facts->RequestFrameSize = le16_to_cpu(facts->RequestFrameSize); 3132 3133 /* 3134 * FC f/w version changed between 1.1 and 1.2 3135 * Old: u16{Major(4),Minor(4),SubMinor(8)} 3136 * New: u32{Major(8),Minor(8),Unit(8),Dev(8)} 3137 */ 3138 if (facts->MsgVersion < MPI_VERSION_01_02) { 3139 /* 3140 * Handle old FC f/w style, convert to new... 3141 */ 3142 u16 oldv = le16_to_cpu(facts->Reserved_0101_FWVersion); 3143 facts->FWVersion.Word = 3144 ((oldv<<12) & 0xFF000000) | 3145 ((oldv<<8) & 0x000FFF00); 3146 } else 3147 facts->FWVersion.Word = le32_to_cpu(facts->FWVersion.Word); 3148 3149 facts->ProductID = le16_to_cpu(facts->ProductID); 3150 3151 if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK) 3152 > MPI_FW_HEADER_PID_PROD_TARGET_SCSI) 3153 ioc->ir_firmware = 1; 3154 3155 facts->CurrentHostMfaHighAddr = 3156 le32_to_cpu(facts->CurrentHostMfaHighAddr); 3157 facts->GlobalCredits = le16_to_cpu(facts->GlobalCredits); 3158 facts->CurrentSenseBufferHighAddr = 3159 le32_to_cpu(facts->CurrentSenseBufferHighAddr); 3160 facts->CurReplyFrameSize = 3161 le16_to_cpu(facts->CurReplyFrameSize); 3162 facts->IOCCapabilities = le32_to_cpu(facts->IOCCapabilities); 3163 3164 /* 3165 * Handle NEW (!) IOCFactsReply fields in MPI-1.01.xx 3166 * Older MPI-1.00.xx struct had 13 dwords, and enlarged 3167 * to 14 in MPI-1.01.0x. 3168 */ 3169 if (facts->MsgLength >= (offsetof(IOCFactsReply_t,FWImageSize) + 7)/4 && 3170 facts->MsgVersion > MPI_VERSION_01_00) { 3171 facts->FWImageSize = le32_to_cpu(facts->FWImageSize); 3172 } 3173 3174 sz = facts->FWImageSize; 3175 if ( sz & 0x01 ) 3176 sz += 1; 3177 if ( sz & 0x02 ) 3178 sz += 2; 3179 facts->FWImageSize = sz; 3180 3181 if (!facts->RequestFrameSize) { 3182 /* Something is wrong! */ 3183 printk(MYIOC_s_ERR_FMT "IOC reported invalid 0 request size!\n", 3184 ioc->name); 3185 return -55; 3186 } 3187 3188 r = sz = facts->BlockSize; 3189 vv = ((63 / (sz * 4)) + 1) & 0x03; 3190 ioc->NB_for_64_byte_frame = vv; 3191 while ( sz ) 3192 { 3193 shiftFactor++; 3194 sz = sz >> 1; 3195 } 3196 ioc->NBShiftFactor = shiftFactor; 3197 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3198 "NB_for_64_byte_frame=%x NBShiftFactor=%x BlockSize=%x\n", 3199 ioc->name, vv, shiftFactor, r)); 3200 3201 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) { 3202 /* 3203 * Set values for this IOC's request & reply frame sizes, 3204 * and request & reply queue depths... 3205 */ 3206 ioc->req_sz = min(MPT_DEFAULT_FRAME_SIZE, facts->RequestFrameSize * 4); 3207 ioc->req_depth = min_t(int, MPT_MAX_REQ_DEPTH, facts->GlobalCredits); 3208 ioc->reply_sz = MPT_REPLY_FRAME_SIZE; 3209 ioc->reply_depth = min_t(int, MPT_DEFAULT_REPLY_DEPTH, facts->ReplyQueueDepth); 3210 3211 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "reply_sz=%3d, reply_depth=%4d\n", 3212 ioc->name, ioc->reply_sz, ioc->reply_depth)); 3213 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "req_sz =%3d, req_depth =%4d\n", 3214 ioc->name, ioc->req_sz, ioc->req_depth)); 3215 3216 /* Get port facts! */ 3217 if ( (r = GetPortFacts(ioc, 0, sleepFlag)) != 0 ) 3218 return r; 3219 } 3220 } else { 3221 printk(MYIOC_s_ERR_FMT 3222 "Invalid IOC facts reply, msgLength=%d offsetof=%zd!\n", 3223 ioc->name, facts->MsgLength, (offsetof(IOCFactsReply_t, 3224 RequestFrameSize)/sizeof(u32))); 3225 return -66; 3226 } 3227 3228 return 0; 3229 } 3230 3231 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3232 /** 3233 * GetPortFacts - Send PortFacts request to MPT adapter. 3234 * @ioc: Pointer to MPT_ADAPTER structure 3235 * @portnum: Port number 3236 * @sleepFlag: Specifies whether the process can sleep 3237 * 3238 * Returns 0 for success, non-zero for failure. 3239 */ 3240 static int 3241 GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag) 3242 { 3243 PortFacts_t get_pfacts; 3244 PortFactsReply_t *pfacts; 3245 int ii; 3246 int req_sz; 3247 int reply_sz; 3248 int max_id; 3249 3250 /* IOC *must* NOT be in RESET state! */ 3251 if (ioc->last_state == MPI_IOC_STATE_RESET) { 3252 printk(MYIOC_s_ERR_FMT "Can't get PortFacts NOT READY! (%08x)\n", 3253 ioc->name, ioc->last_state ); 3254 return -4; 3255 } 3256 3257 pfacts = &ioc->pfacts[portnum]; 3258 3259 /* Destination (reply area)... */ 3260 reply_sz = sizeof(*pfacts); 3261 memset(pfacts, 0, reply_sz); 3262 3263 /* Request area (get_pfacts on the stack right now!) */ 3264 req_sz = sizeof(get_pfacts); 3265 memset(&get_pfacts, 0, req_sz); 3266 3267 get_pfacts.Function = MPI_FUNCTION_PORT_FACTS; 3268 get_pfacts.PortNumber = portnum; 3269 /* Assert: All other get_pfacts fields are zero! */ 3270 3271 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending get PortFacts(%d) request\n", 3272 ioc->name, portnum)); 3273 3274 /* No non-zero fields in the get_pfacts request are greater than 3275 * 1 byte in size, so we can just fire it off as is. 3276 */ 3277 ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_pfacts, 3278 reply_sz, (u16*)pfacts, 5 /*seconds*/, sleepFlag); 3279 if (ii != 0) 3280 return ii; 3281 3282 /* Did we get a valid reply? */ 3283 3284 /* Now byte swap the necessary fields in the response. */ 3285 pfacts->MsgContext = le32_to_cpu(pfacts->MsgContext); 3286 pfacts->IOCStatus = le16_to_cpu(pfacts->IOCStatus); 3287 pfacts->IOCLogInfo = le32_to_cpu(pfacts->IOCLogInfo); 3288 pfacts->MaxDevices = le16_to_cpu(pfacts->MaxDevices); 3289 pfacts->PortSCSIID = le16_to_cpu(pfacts->PortSCSIID); 3290 pfacts->ProtocolFlags = le16_to_cpu(pfacts->ProtocolFlags); 3291 pfacts->MaxPostedCmdBuffers = le16_to_cpu(pfacts->MaxPostedCmdBuffers); 3292 pfacts->MaxPersistentIDs = le16_to_cpu(pfacts->MaxPersistentIDs); 3293 pfacts->MaxLanBuckets = le16_to_cpu(pfacts->MaxLanBuckets); 3294 3295 max_id = (ioc->bus_type == SAS) ? pfacts->PortSCSIID : 3296 pfacts->MaxDevices; 3297 ioc->devices_per_bus = (max_id > 255) ? 256 : max_id; 3298 ioc->number_of_buses = (ioc->devices_per_bus < 256) ? 1 : max_id/256; 3299 3300 /* 3301 * Place all the devices on channels 3302 * 3303 * (for debuging) 3304 */ 3305 if (mpt_channel_mapping) { 3306 ioc->devices_per_bus = 1; 3307 ioc->number_of_buses = (max_id > 255) ? 255 : max_id; 3308 } 3309 3310 return 0; 3311 } 3312 3313 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3314 /** 3315 * SendIocInit - Send IOCInit request to MPT adapter. 3316 * @ioc: Pointer to MPT_ADAPTER structure 3317 * @sleepFlag: Specifies whether the process can sleep 3318 * 3319 * Send IOCInit followed by PortEnable to bring IOC to OPERATIONAL state. 3320 * 3321 * Returns 0 for success, non-zero for failure. 3322 */ 3323 static int 3324 SendIocInit(MPT_ADAPTER *ioc, int sleepFlag) 3325 { 3326 IOCInit_t ioc_init; 3327 MPIDefaultReply_t init_reply; 3328 u32 state; 3329 int r; 3330 int count; 3331 int cntdn; 3332 3333 memset(&ioc_init, 0, sizeof(ioc_init)); 3334 memset(&init_reply, 0, sizeof(init_reply)); 3335 3336 ioc_init.WhoInit = MPI_WHOINIT_HOST_DRIVER; 3337 ioc_init.Function = MPI_FUNCTION_IOC_INIT; 3338 3339 /* If we are in a recovery mode and we uploaded the FW image, 3340 * then this pointer is not NULL. Skip the upload a second time. 3341 * Set this flag if cached_fw set for either IOC. 3342 */ 3343 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT) 3344 ioc->upload_fw = 1; 3345 else 3346 ioc->upload_fw = 0; 3347 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "upload_fw %d facts.Flags=%x\n", 3348 ioc->name, ioc->upload_fw, ioc->facts.Flags)); 3349 3350 ioc_init.MaxDevices = (U8)ioc->devices_per_bus; 3351 ioc_init.MaxBuses = (U8)ioc->number_of_buses; 3352 3353 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "facts.MsgVersion=%x\n", 3354 ioc->name, ioc->facts.MsgVersion)); 3355 if (ioc->facts.MsgVersion >= MPI_VERSION_01_05) { 3356 // set MsgVersion and HeaderVersion host driver was built with 3357 ioc_init.MsgVersion = cpu_to_le16(MPI_VERSION); 3358 ioc_init.HeaderVersion = cpu_to_le16(MPI_HEADER_VERSION); 3359 3360 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_HOST_PAGE_BUFFER_PERSISTENT) { 3361 ioc_init.HostPageBufferSGE = ioc->facts.HostPageBufferSGE; 3362 } else if(mpt_host_page_alloc(ioc, &ioc_init)) 3363 return -99; 3364 } 3365 ioc_init.ReplyFrameSize = cpu_to_le16(ioc->reply_sz); /* in BYTES */ 3366 3367 if (ioc->sg_addr_size == sizeof(u64)) { 3368 /* Save the upper 32-bits of the request 3369 * (reply) and sense buffers. 3370 */ 3371 ioc_init.HostMfaHighAddr = cpu_to_le32((u32)((u64)ioc->alloc_dma >> 32)); 3372 ioc_init.SenseBufferHighAddr = cpu_to_le32((u32)((u64)ioc->sense_buf_pool_dma >> 32)); 3373 } else { 3374 /* Force 32-bit addressing */ 3375 ioc_init.HostMfaHighAddr = cpu_to_le32(0); 3376 ioc_init.SenseBufferHighAddr = cpu_to_le32(0); 3377 } 3378 3379 ioc->facts.CurrentHostMfaHighAddr = ioc_init.HostMfaHighAddr; 3380 ioc->facts.CurrentSenseBufferHighAddr = ioc_init.SenseBufferHighAddr; 3381 ioc->facts.MaxDevices = ioc_init.MaxDevices; 3382 ioc->facts.MaxBuses = ioc_init.MaxBuses; 3383 3384 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOCInit (req @ %p)\n", 3385 ioc->name, &ioc_init)); 3386 3387 r = mpt_handshake_req_reply_wait(ioc, sizeof(IOCInit_t), (u32*)&ioc_init, 3388 sizeof(MPIDefaultReply_t), (u16*)&init_reply, 10 /*seconds*/, sleepFlag); 3389 if (r != 0) { 3390 printk(MYIOC_s_ERR_FMT "Sending IOCInit failed(%d)!\n",ioc->name, r); 3391 return r; 3392 } 3393 3394 /* No need to byte swap the multibyte fields in the reply 3395 * since we don't even look at its contents. 3396 */ 3397 3398 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending PortEnable (req @ %p)\n", 3399 ioc->name, &ioc_init)); 3400 3401 if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0) { 3402 printk(MYIOC_s_ERR_FMT "Sending PortEnable failed(%d)!\n",ioc->name, r); 3403 return r; 3404 } 3405 3406 /* YIKES! SUPER IMPORTANT!!! 3407 * Poll IocState until _OPERATIONAL while IOC is doing 3408 * LoopInit and TargetDiscovery! 3409 */ 3410 count = 0; 3411 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 60; /* 60 seconds */ 3412 state = mpt_GetIocState(ioc, 1); 3413 while (state != MPI_IOC_STATE_OPERATIONAL && --cntdn) { 3414 if (sleepFlag == CAN_SLEEP) { 3415 msleep(1); 3416 } else { 3417 mdelay(1); 3418 } 3419 3420 if (!cntdn) { 3421 printk(MYIOC_s_ERR_FMT "Wait IOC_OP state timeout(%d)!\n", 3422 ioc->name, (int)((count+5)/HZ)); 3423 return -9; 3424 } 3425 3426 state = mpt_GetIocState(ioc, 1); 3427 count++; 3428 } 3429 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wait IOC_OPERATIONAL state (cnt=%d)\n", 3430 ioc->name, count)); 3431 3432 ioc->aen_event_read_flag=0; 3433 return r; 3434 } 3435 3436 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3437 /** 3438 * SendPortEnable - Send PortEnable request to MPT adapter port. 3439 * @ioc: Pointer to MPT_ADAPTER structure 3440 * @portnum: Port number to enable 3441 * @sleepFlag: Specifies whether the process can sleep 3442 * 3443 * Send PortEnable to bring IOC to OPERATIONAL state. 3444 * 3445 * Returns 0 for success, non-zero for failure. 3446 */ 3447 static int 3448 SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag) 3449 { 3450 PortEnable_t port_enable; 3451 MPIDefaultReply_t reply_buf; 3452 int rc; 3453 int req_sz; 3454 int reply_sz; 3455 3456 /* Destination... */ 3457 reply_sz = sizeof(MPIDefaultReply_t); 3458 memset(&reply_buf, 0, reply_sz); 3459 3460 req_sz = sizeof(PortEnable_t); 3461 memset(&port_enable, 0, req_sz); 3462 3463 port_enable.Function = MPI_FUNCTION_PORT_ENABLE; 3464 port_enable.PortNumber = portnum; 3465 /* port_enable.ChainOffset = 0; */ 3466 /* port_enable.MsgFlags = 0; */ 3467 /* port_enable.MsgContext = 0; */ 3468 3469 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Port(%d)Enable (req @ %p)\n", 3470 ioc->name, portnum, &port_enable)); 3471 3472 /* RAID FW may take a long time to enable 3473 */ 3474 if (ioc->ir_firmware || ioc->bus_type == SAS) { 3475 rc = mpt_handshake_req_reply_wait(ioc, req_sz, 3476 (u32*)&port_enable, reply_sz, (u16*)&reply_buf, 3477 300 /*seconds*/, sleepFlag); 3478 } else { 3479 rc = mpt_handshake_req_reply_wait(ioc, req_sz, 3480 (u32*)&port_enable, reply_sz, (u16*)&reply_buf, 3481 30 /*seconds*/, sleepFlag); 3482 } 3483 return rc; 3484 } 3485 3486 /** 3487 * mpt_alloc_fw_memory - allocate firmware memory 3488 * @ioc: Pointer to MPT_ADAPTER structure 3489 * @size: total FW bytes 3490 * 3491 * If memory has already been allocated, the same (cached) value 3492 * is returned. 3493 * 3494 * Return 0 if successful, or non-zero for failure 3495 **/ 3496 int 3497 mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size) 3498 { 3499 int rc; 3500 3501 if (ioc->cached_fw) { 3502 rc = 0; /* use already allocated memory */ 3503 goto out; 3504 } 3505 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) { 3506 ioc->cached_fw = ioc->alt_ioc->cached_fw; /* use alt_ioc's memory */ 3507 ioc->cached_fw_dma = ioc->alt_ioc->cached_fw_dma; 3508 rc = 0; 3509 goto out; 3510 } 3511 ioc->cached_fw = pci_alloc_consistent(ioc->pcidev, size, &ioc->cached_fw_dma); 3512 if (!ioc->cached_fw) { 3513 printk(MYIOC_s_ERR_FMT "Unable to allocate memory for the cached firmware image!\n", 3514 ioc->name); 3515 rc = -1; 3516 } else { 3517 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Image @ %p[%p], sz=%d[%x] bytes\n", 3518 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, size, size)); 3519 ioc->alloc_total += size; 3520 rc = 0; 3521 } 3522 out: 3523 return rc; 3524 } 3525 3526 /** 3527 * mpt_free_fw_memory - free firmware memory 3528 * @ioc: Pointer to MPT_ADAPTER structure 3529 * 3530 * If alt_img is NULL, delete from ioc structure. 3531 * Else, delete a secondary image in same format. 3532 **/ 3533 void 3534 mpt_free_fw_memory(MPT_ADAPTER *ioc) 3535 { 3536 int sz; 3537 3538 if (!ioc->cached_fw) 3539 return; 3540 3541 sz = ioc->facts.FWImageSize; 3542 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n", 3543 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz)); 3544 pci_free_consistent(ioc->pcidev, sz, ioc->cached_fw, ioc->cached_fw_dma); 3545 ioc->alloc_total -= sz; 3546 ioc->cached_fw = NULL; 3547 } 3548 3549 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3550 /** 3551 * mpt_do_upload - Construct and Send FWUpload request to MPT adapter port. 3552 * @ioc: Pointer to MPT_ADAPTER structure 3553 * @sleepFlag: Specifies whether the process can sleep 3554 * 3555 * Returns 0 for success, >0 for handshake failure 3556 * <0 for fw upload failure. 3557 * 3558 * Remark: If bound IOC and a successful FWUpload was performed 3559 * on the bound IOC, the second image is discarded 3560 * and memory is free'd. Both channels must upload to prevent 3561 * IOC from running in degraded mode. 3562 */ 3563 static int 3564 mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag) 3565 { 3566 u8 reply[sizeof(FWUploadReply_t)]; 3567 FWUpload_t *prequest; 3568 FWUploadReply_t *preply; 3569 FWUploadTCSGE_t *ptcsge; 3570 u32 flagsLength; 3571 int ii, sz, reply_sz; 3572 int cmdStatus; 3573 int request_size; 3574 /* If the image size is 0, we are done. 3575 */ 3576 if ((sz = ioc->facts.FWImageSize) == 0) 3577 return 0; 3578 3579 if (mpt_alloc_fw_memory(ioc, ioc->facts.FWImageSize) != 0) 3580 return -ENOMEM; 3581 3582 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": FW Image @ %p[%p], sz=%d[%x] bytes\n", 3583 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz)); 3584 3585 prequest = (sleepFlag == NO_SLEEP) ? kzalloc(ioc->req_sz, GFP_ATOMIC) : 3586 kzalloc(ioc->req_sz, GFP_KERNEL); 3587 if (!prequest) { 3588 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed " 3589 "while allocating memory \n", ioc->name)); 3590 mpt_free_fw_memory(ioc); 3591 return -ENOMEM; 3592 } 3593 3594 preply = (FWUploadReply_t *)&reply; 3595 3596 reply_sz = sizeof(reply); 3597 memset(preply, 0, reply_sz); 3598 3599 prequest->ImageType = MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM; 3600 prequest->Function = MPI_FUNCTION_FW_UPLOAD; 3601 3602 ptcsge = (FWUploadTCSGE_t *) &prequest->SGL; 3603 ptcsge->DetailsLength = 12; 3604 ptcsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT; 3605 ptcsge->ImageSize = cpu_to_le32(sz); 3606 ptcsge++; 3607 3608 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | sz; 3609 ioc->add_sge((char *)ptcsge, flagsLength, ioc->cached_fw_dma); 3610 request_size = offsetof(FWUpload_t, SGL) + sizeof(FWUploadTCSGE_t) + 3611 ioc->SGE_size; 3612 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending FW Upload " 3613 " (req @ %p) fw_size=%d mf_request_size=%d\n", ioc->name, prequest, 3614 ioc->facts.FWImageSize, request_size)); 3615 DBG_DUMP_FW_REQUEST_FRAME(ioc, (u32 *)prequest); 3616 3617 ii = mpt_handshake_req_reply_wait(ioc, request_size, (u32 *)prequest, 3618 reply_sz, (u16 *)preply, 65 /*seconds*/, sleepFlag); 3619 3620 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Upload completed " 3621 "rc=%x \n", ioc->name, ii)); 3622 3623 cmdStatus = -EFAULT; 3624 if (ii == 0) { 3625 /* Handshake transfer was complete and successful. 3626 * Check the Reply Frame. 3627 */ 3628 int status; 3629 status = le16_to_cpu(preply->IOCStatus) & 3630 MPI_IOCSTATUS_MASK; 3631 if (status == MPI_IOCSTATUS_SUCCESS && 3632 ioc->facts.FWImageSize == 3633 le32_to_cpu(preply->ActualImageSize)) 3634 cmdStatus = 0; 3635 } 3636 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": do_upload cmdStatus=%d \n", 3637 ioc->name, cmdStatus)); 3638 3639 3640 if (cmdStatus) { 3641 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed, " 3642 "freeing image \n", ioc->name)); 3643 mpt_free_fw_memory(ioc); 3644 } 3645 kfree(prequest); 3646 3647 return cmdStatus; 3648 } 3649 3650 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3651 /** 3652 * mpt_downloadboot - DownloadBoot code 3653 * @ioc: Pointer to MPT_ADAPTER structure 3654 * @pFwHeader: Pointer to firmware header info 3655 * @sleepFlag: Specifies whether the process can sleep 3656 * 3657 * FwDownloadBoot requires Programmed IO access. 3658 * 3659 * Returns 0 for success 3660 * -1 FW Image size is 0 3661 * -2 No valid cached_fw Pointer 3662 * <0 for fw upload failure. 3663 */ 3664 static int 3665 mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag) 3666 { 3667 MpiExtImageHeader_t *pExtImage; 3668 u32 fwSize; 3669 u32 diag0val; 3670 int count; 3671 u32 *ptrFw; 3672 u32 diagRwData; 3673 u32 nextImage; 3674 u32 load_addr; 3675 u32 ioc_state=0; 3676 3677 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot: fw size 0x%x (%d), FW Ptr %p\n", 3678 ioc->name, pFwHeader->ImageSize, pFwHeader->ImageSize, pFwHeader)); 3679 3680 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); 3681 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE); 3682 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE); 3683 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE); 3684 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE); 3685 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE); 3686 3687 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM)); 3688 3689 /* wait 1 msec */ 3690 if (sleepFlag == CAN_SLEEP) { 3691 msleep(1); 3692 } else { 3693 mdelay (1); 3694 } 3695 3696 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 3697 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER); 3698 3699 for (count = 0; count < 30; count ++) { 3700 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 3701 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) { 3702 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RESET_ADAPTER cleared, count=%d\n", 3703 ioc->name, count)); 3704 break; 3705 } 3706 /* wait .1 sec */ 3707 if (sleepFlag == CAN_SLEEP) { 3708 msleep (100); 3709 } else { 3710 mdelay (100); 3711 } 3712 } 3713 3714 if ( count == 30 ) { 3715 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot failed! " 3716 "Unable to get MPI_DIAG_DRWE mode, diag0val=%x\n", 3717 ioc->name, diag0val)); 3718 return -3; 3719 } 3720 3721 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); 3722 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE); 3723 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE); 3724 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE); 3725 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE); 3726 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE); 3727 3728 /* Set the DiagRwEn and Disable ARM bits */ 3729 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_RW_ENABLE | MPI_DIAG_DISABLE_ARM)); 3730 3731 fwSize = (pFwHeader->ImageSize + 3)/4; 3732 ptrFw = (u32 *) pFwHeader; 3733 3734 /* Write the LoadStartAddress to the DiagRw Address Register 3735 * using Programmed IO 3736 */ 3737 if (ioc->errata_flag_1064) 3738 pci_enable_io_access(ioc->pcidev); 3739 3740 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->LoadStartAddress); 3741 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "LoadStart addr written 0x%x \n", 3742 ioc->name, pFwHeader->LoadStartAddress)); 3743 3744 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write FW Image: 0x%x bytes @ %p\n", 3745 ioc->name, fwSize*4, ptrFw)); 3746 while (fwSize--) { 3747 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++); 3748 } 3749 3750 nextImage = pFwHeader->NextImageHeaderOffset; 3751 while (nextImage) { 3752 pExtImage = (MpiExtImageHeader_t *) ((char *)pFwHeader + nextImage); 3753 3754 load_addr = pExtImage->LoadStartAddress; 3755 3756 fwSize = (pExtImage->ImageSize + 3) >> 2; 3757 ptrFw = (u32 *)pExtImage; 3758 3759 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write Ext Image: 0x%x (%d) bytes @ %p load_addr=%x\n", 3760 ioc->name, fwSize*4, fwSize*4, ptrFw, load_addr)); 3761 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, load_addr); 3762 3763 while (fwSize--) { 3764 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++); 3765 } 3766 nextImage = pExtImage->NextImageHeaderOffset; 3767 } 3768 3769 /* Write the IopResetVectorRegAddr */ 3770 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Addr=%x! \n", ioc->name, pFwHeader->IopResetRegAddr)); 3771 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->IopResetRegAddr); 3772 3773 /* Write the IopResetVectorValue */ 3774 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Value=%x! \n", ioc->name, pFwHeader->IopResetVectorValue)); 3775 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, pFwHeader->IopResetVectorValue); 3776 3777 /* Clear the internal flash bad bit - autoincrementing register, 3778 * so must do two writes. 3779 */ 3780 if (ioc->bus_type == SPI) { 3781 /* 3782 * 1030 and 1035 H/W errata, workaround to access 3783 * the ClearFlashBadSignatureBit 3784 */ 3785 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000); 3786 diagRwData = CHIPREG_PIO_READ32(&ioc->pio_chip->DiagRwData); 3787 diagRwData |= 0x40000000; 3788 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000); 3789 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, diagRwData); 3790 3791 } else /* if((ioc->bus_type == SAS) || (ioc->bus_type == FC)) */ { 3792 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 3793 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | 3794 MPI_DIAG_CLEAR_FLASH_BAD_SIG); 3795 3796 /* wait 1 msec */ 3797 if (sleepFlag == CAN_SLEEP) { 3798 msleep (1); 3799 } else { 3800 mdelay (1); 3801 } 3802 } 3803 3804 if (ioc->errata_flag_1064) 3805 pci_disable_io_access(ioc->pcidev); 3806 3807 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 3808 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot diag0val=%x, " 3809 "turning off PREVENT_IOC_BOOT, DISABLE_ARM, RW_ENABLE\n", 3810 ioc->name, diag0val)); 3811 diag0val &= ~(MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM | MPI_DIAG_RW_ENABLE); 3812 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot now diag0val=%x\n", 3813 ioc->name, diag0val)); 3814 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val); 3815 3816 /* Write 0xFF to reset the sequencer */ 3817 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); 3818 3819 if (ioc->bus_type == SAS) { 3820 ioc_state = mpt_GetIocState(ioc, 0); 3821 if ( (GetIocFacts(ioc, sleepFlag, 3822 MPT_HOSTEVENT_IOC_BRINGUP)) != 0 ) { 3823 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "GetIocFacts failed: IocState=%x\n", 3824 ioc->name, ioc_state)); 3825 return -EFAULT; 3826 } 3827 } 3828 3829 for (count=0; count<HZ*20; count++) { 3830 if ((ioc_state = mpt_GetIocState(ioc, 0)) & MPI_IOC_STATE_READY) { 3831 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3832 "downloadboot successful! (count=%d) IocState=%x\n", 3833 ioc->name, count, ioc_state)); 3834 if (ioc->bus_type == SAS) { 3835 return 0; 3836 } 3837 if ((SendIocInit(ioc, sleepFlag)) != 0) { 3838 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3839 "downloadboot: SendIocInit failed\n", 3840 ioc->name)); 3841 return -EFAULT; 3842 } 3843 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3844 "downloadboot: SendIocInit successful\n", 3845 ioc->name)); 3846 return 0; 3847 } 3848 if (sleepFlag == CAN_SLEEP) { 3849 msleep (10); 3850 } else { 3851 mdelay (10); 3852 } 3853 } 3854 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3855 "downloadboot failed! IocState=%x\n",ioc->name, ioc_state)); 3856 return -EFAULT; 3857 } 3858 3859 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3860 /** 3861 * KickStart - Perform hard reset of MPT adapter. 3862 * @ioc: Pointer to MPT_ADAPTER structure 3863 * @force: Force hard reset 3864 * @sleepFlag: Specifies whether the process can sleep 3865 * 3866 * This routine places MPT adapter in diagnostic mode via the 3867 * WriteSequence register, and then performs a hard reset of adapter 3868 * via the Diagnostic register. 3869 * 3870 * Inputs: sleepflag - CAN_SLEEP (non-interrupt thread) 3871 * or NO_SLEEP (interrupt thread, use mdelay) 3872 * force - 1 if doorbell active, board fault state 3873 * board operational, IOC_RECOVERY or 3874 * IOC_BRINGUP and there is an alt_ioc. 3875 * 0 else 3876 * 3877 * Returns: 3878 * 1 - hard reset, READY 3879 * 0 - no reset due to History bit, READY 3880 * -1 - no reset due to History bit but not READY 3881 * OR reset but failed to come READY 3882 * -2 - no reset, could not enter DIAG mode 3883 * -3 - reset but bad FW bit 3884 */ 3885 static int 3886 KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag) 3887 { 3888 int hard_reset_done = 0; 3889 u32 ioc_state=0; 3890 int cnt,cntdn; 3891 3892 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStarting!\n", ioc->name)); 3893 if (ioc->bus_type == SPI) { 3894 /* Always issue a Msg Unit Reset first. This will clear some 3895 * SCSI bus hang conditions. 3896 */ 3897 SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag); 3898 3899 if (sleepFlag == CAN_SLEEP) { 3900 msleep (1000); 3901 } else { 3902 mdelay (1000); 3903 } 3904 } 3905 3906 hard_reset_done = mpt_diag_reset(ioc, force, sleepFlag); 3907 if (hard_reset_done < 0) 3908 return hard_reset_done; 3909 3910 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset successful!\n", 3911 ioc->name)); 3912 3913 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 2; /* 2 seconds */ 3914 for (cnt=0; cnt<cntdn; cnt++) { 3915 ioc_state = mpt_GetIocState(ioc, 1); 3916 if ((ioc_state == MPI_IOC_STATE_READY) || (ioc_state == MPI_IOC_STATE_OPERATIONAL)) { 3917 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStart successful! (cnt=%d)\n", 3918 ioc->name, cnt)); 3919 return hard_reset_done; 3920 } 3921 if (sleepFlag == CAN_SLEEP) { 3922 msleep (10); 3923 } else { 3924 mdelay (10); 3925 } 3926 } 3927 3928 dinitprintk(ioc, printk(MYIOC_s_ERR_FMT "Failed to come READY after reset! IocState=%x\n", 3929 ioc->name, mpt_GetIocState(ioc, 0))); 3930 return -1; 3931 } 3932 3933 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3934 /** 3935 * mpt_diag_reset - Perform hard reset of the adapter. 3936 * @ioc: Pointer to MPT_ADAPTER structure 3937 * @ignore: Set if to honor and clear to ignore 3938 * the reset history bit 3939 * @sleepFlag: CAN_SLEEP if called in a non-interrupt thread, 3940 * else set to NO_SLEEP (use mdelay instead) 3941 * 3942 * This routine places the adapter in diagnostic mode via the 3943 * WriteSequence register and then performs a hard reset of adapter 3944 * via the Diagnostic register. Adapter should be in ready state 3945 * upon successful completion. 3946 * 3947 * Returns: 1 hard reset successful 3948 * 0 no reset performed because reset history bit set 3949 * -2 enabling diagnostic mode failed 3950 * -3 diagnostic reset failed 3951 */ 3952 static int 3953 mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag) 3954 { 3955 u32 diag0val; 3956 u32 doorbell; 3957 int hard_reset_done = 0; 3958 int count = 0; 3959 u32 diag1val = 0; 3960 MpiFwHeader_t *cached_fw; /* Pointer to FW */ 3961 u8 cb_idx; 3962 3963 /* Clear any existing interrupts */ 3964 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 3965 3966 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) { 3967 3968 if (!ignore) 3969 return 0; 3970 3971 drsprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset " 3972 "address=%p\n", ioc->name, __func__, 3973 &ioc->chip->Doorbell, &ioc->chip->Reset_1078)); 3974 CHIPREG_WRITE32(&ioc->chip->Reset_1078, 0x07); 3975 if (sleepFlag == CAN_SLEEP) 3976 msleep(1); 3977 else 3978 mdelay(1); 3979 3980 /* 3981 * Call each currently registered protocol IOC reset handler 3982 * with pre-reset indication. 3983 * NOTE: If we're doing _IOC_BRINGUP, there can be no 3984 * MptResetHandlers[] registered yet. 3985 */ 3986 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 3987 if (MptResetHandlers[cb_idx]) 3988 (*(MptResetHandlers[cb_idx]))(ioc, 3989 MPT_IOC_PRE_RESET); 3990 } 3991 3992 for (count = 0; count < 60; count ++) { 3993 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell); 3994 doorbell &= MPI_IOC_STATE_MASK; 3995 3996 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3997 "looking for READY STATE: doorbell=%x" 3998 " count=%d\n", 3999 ioc->name, doorbell, count)); 4000 4001 if (doorbell == MPI_IOC_STATE_READY) { 4002 return 1; 4003 } 4004 4005 /* wait 1 sec */ 4006 if (sleepFlag == CAN_SLEEP) 4007 msleep(1000); 4008 else 4009 mdelay(1000); 4010 } 4011 return -1; 4012 } 4013 4014 /* Use "Diagnostic reset" method! (only thing available!) */ 4015 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4016 4017 if (ioc->debug_level & MPT_DEBUG) { 4018 if (ioc->alt_ioc) 4019 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic); 4020 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG1: diag0=%08x, diag1=%08x\n", 4021 ioc->name, diag0val, diag1val)); 4022 } 4023 4024 /* Do the reset if we are told to ignore the reset history 4025 * or if the reset history is 0 4026 */ 4027 if (ignore || !(diag0val & MPI_DIAG_RESET_HISTORY)) { 4028 while ((diag0val & MPI_DIAG_DRWE) == 0) { 4029 /* Write magic sequence to WriteSequence register 4030 * Loop until in diagnostic mode 4031 */ 4032 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); 4033 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE); 4034 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE); 4035 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE); 4036 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE); 4037 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE); 4038 4039 /* wait 100 msec */ 4040 if (sleepFlag == CAN_SLEEP) { 4041 msleep (100); 4042 } else { 4043 mdelay (100); 4044 } 4045 4046 count++; 4047 if (count > 20) { 4048 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n", 4049 ioc->name, diag0val); 4050 return -2; 4051 4052 } 4053 4054 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4055 4056 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wrote magic DiagWriteEn sequence (%x)\n", 4057 ioc->name, diag0val)); 4058 } 4059 4060 if (ioc->debug_level & MPT_DEBUG) { 4061 if (ioc->alt_ioc) 4062 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic); 4063 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG2: diag0=%08x, diag1=%08x\n", 4064 ioc->name, diag0val, diag1val)); 4065 } 4066 /* 4067 * Disable the ARM (Bug fix) 4068 * 4069 */ 4070 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_DISABLE_ARM); 4071 mdelay(1); 4072 4073 /* 4074 * Now hit the reset bit in the Diagnostic register 4075 * (THE BIG HAMMER!) (Clears DRWE bit). 4076 */ 4077 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER); 4078 hard_reset_done = 1; 4079 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset performed\n", 4080 ioc->name)); 4081 4082 /* 4083 * Call each currently registered protocol IOC reset handler 4084 * with pre-reset indication. 4085 * NOTE: If we're doing _IOC_BRINGUP, there can be no 4086 * MptResetHandlers[] registered yet. 4087 */ 4088 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 4089 if (MptResetHandlers[cb_idx]) { 4090 mpt_signal_reset(cb_idx, 4091 ioc, MPT_IOC_PRE_RESET); 4092 if (ioc->alt_ioc) { 4093 mpt_signal_reset(cb_idx, 4094 ioc->alt_ioc, MPT_IOC_PRE_RESET); 4095 } 4096 } 4097 } 4098 4099 if (ioc->cached_fw) 4100 cached_fw = (MpiFwHeader_t *)ioc->cached_fw; 4101 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) 4102 cached_fw = (MpiFwHeader_t *)ioc->alt_ioc->cached_fw; 4103 else 4104 cached_fw = NULL; 4105 if (cached_fw) { 4106 /* If the DownloadBoot operation fails, the 4107 * IOC will be left unusable. This is a fatal error 4108 * case. _diag_reset will return < 0 4109 */ 4110 for (count = 0; count < 30; count ++) { 4111 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4112 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) { 4113 break; 4114 } 4115 4116 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "cached_fw: diag0val=%x count=%d\n", 4117 ioc->name, diag0val, count)); 4118 /* wait 1 sec */ 4119 if (sleepFlag == CAN_SLEEP) { 4120 msleep (1000); 4121 } else { 4122 mdelay (1000); 4123 } 4124 } 4125 if ((count = mpt_downloadboot(ioc, cached_fw, sleepFlag)) < 0) { 4126 printk(MYIOC_s_WARN_FMT 4127 "firmware downloadboot failure (%d)!\n", ioc->name, count); 4128 } 4129 4130 } else { 4131 /* Wait for FW to reload and for board 4132 * to go to the READY state. 4133 * Maximum wait is 60 seconds. 4134 * If fail, no error will check again 4135 * with calling program. 4136 */ 4137 for (count = 0; count < 60; count ++) { 4138 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell); 4139 doorbell &= MPI_IOC_STATE_MASK; 4140 4141 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT 4142 "looking for READY STATE: doorbell=%x" 4143 " count=%d\n", ioc->name, doorbell, count)); 4144 4145 if (doorbell == MPI_IOC_STATE_READY) { 4146 break; 4147 } 4148 4149 /* wait 1 sec */ 4150 if (sleepFlag == CAN_SLEEP) { 4151 msleep (1000); 4152 } else { 4153 mdelay (1000); 4154 } 4155 } 4156 4157 if (doorbell != MPI_IOC_STATE_READY) 4158 printk(MYIOC_s_ERR_FMT "Failed to come READY " 4159 "after reset! IocState=%x", ioc->name, 4160 doorbell); 4161 } 4162 } 4163 4164 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4165 if (ioc->debug_level & MPT_DEBUG) { 4166 if (ioc->alt_ioc) 4167 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic); 4168 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG3: diag0=%08x, diag1=%08x\n", 4169 ioc->name, diag0val, diag1val)); 4170 } 4171 4172 /* Clear RESET_HISTORY bit! Place board in the 4173 * diagnostic mode to update the diag register. 4174 */ 4175 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4176 count = 0; 4177 while ((diag0val & MPI_DIAG_DRWE) == 0) { 4178 /* Write magic sequence to WriteSequence register 4179 * Loop until in diagnostic mode 4180 */ 4181 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); 4182 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE); 4183 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE); 4184 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE); 4185 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE); 4186 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE); 4187 4188 /* wait 100 msec */ 4189 if (sleepFlag == CAN_SLEEP) { 4190 msleep (100); 4191 } else { 4192 mdelay (100); 4193 } 4194 4195 count++; 4196 if (count > 20) { 4197 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n", 4198 ioc->name, diag0val); 4199 break; 4200 } 4201 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4202 } 4203 diag0val &= ~MPI_DIAG_RESET_HISTORY; 4204 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val); 4205 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4206 if (diag0val & MPI_DIAG_RESET_HISTORY) { 4207 printk(MYIOC_s_WARN_FMT "ResetHistory bit failed to clear!\n", 4208 ioc->name); 4209 } 4210 4211 /* Disable Diagnostic Mode 4212 */ 4213 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFFFFFFFF); 4214 4215 /* Check FW reload status flags. 4216 */ 4217 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4218 if (diag0val & (MPI_DIAG_FLASH_BAD_SIG | MPI_DIAG_RESET_ADAPTER | MPI_DIAG_DISABLE_ARM)) { 4219 printk(MYIOC_s_ERR_FMT "Diagnostic reset FAILED! (%02xh)\n", 4220 ioc->name, diag0val); 4221 return -3; 4222 } 4223 4224 if (ioc->debug_level & MPT_DEBUG) { 4225 if (ioc->alt_ioc) 4226 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic); 4227 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG4: diag0=%08x, diag1=%08x\n", 4228 ioc->name, diag0val, diag1val)); 4229 } 4230 4231 /* 4232 * Reset flag that says we've enabled event notification 4233 */ 4234 ioc->facts.EventState = 0; 4235 4236 if (ioc->alt_ioc) 4237 ioc->alt_ioc->facts.EventState = 0; 4238 4239 return hard_reset_done; 4240 } 4241 4242 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4243 /** 4244 * SendIocReset - Send IOCReset request to MPT adapter. 4245 * @ioc: Pointer to MPT_ADAPTER structure 4246 * @reset_type: reset type, expected values are 4247 * %MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET or %MPI_FUNCTION_IO_UNIT_RESET 4248 * @sleepFlag: Specifies whether the process can sleep 4249 * 4250 * Send IOCReset request to the MPT adapter. 4251 * 4252 * Returns 0 for success, non-zero for failure. 4253 */ 4254 static int 4255 SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag) 4256 { 4257 int r; 4258 u32 state; 4259 int cntdn, count; 4260 4261 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOC reset(0x%02x)!\n", 4262 ioc->name, reset_type)); 4263 CHIPREG_WRITE32(&ioc->chip->Doorbell, reset_type<<MPI_DOORBELL_FUNCTION_SHIFT); 4264 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) 4265 return r; 4266 4267 /* FW ACK'd request, wait for READY state 4268 */ 4269 count = 0; 4270 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 15; /* 15 seconds */ 4271 4272 while ((state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) { 4273 cntdn--; 4274 count++; 4275 if (!cntdn) { 4276 if (sleepFlag != CAN_SLEEP) 4277 count *= 10; 4278 4279 printk(MYIOC_s_ERR_FMT 4280 "Wait IOC_READY state (0x%x) timeout(%d)!\n", 4281 ioc->name, state, (int)((count+5)/HZ)); 4282 return -ETIME; 4283 } 4284 4285 if (sleepFlag == CAN_SLEEP) { 4286 msleep(1); 4287 } else { 4288 mdelay (1); /* 1 msec delay */ 4289 } 4290 } 4291 4292 /* TODO! 4293 * Cleanup all event stuff for this IOC; re-issue EventNotification 4294 * request if needed. 4295 */ 4296 if (ioc->facts.Function) 4297 ioc->facts.EventState = 0; 4298 4299 return 0; 4300 } 4301 4302 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4303 /** 4304 * initChainBuffers - Allocate memory for and initialize chain buffers 4305 * @ioc: Pointer to MPT_ADAPTER structure 4306 * 4307 * Allocates memory for and initializes chain buffers, 4308 * chain buffer control arrays and spinlock. 4309 */ 4310 static int 4311 initChainBuffers(MPT_ADAPTER *ioc) 4312 { 4313 u8 *mem; 4314 int sz, ii, num_chain; 4315 int scale, num_sge, numSGE; 4316 4317 /* ReqToChain size must equal the req_depth 4318 * index = req_idx 4319 */ 4320 if (ioc->ReqToChain == NULL) { 4321 sz = ioc->req_depth * sizeof(int); 4322 mem = kmalloc(sz, GFP_ATOMIC); 4323 if (mem == NULL) 4324 return -1; 4325 4326 ioc->ReqToChain = (int *) mem; 4327 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReqToChain alloc @ %p, sz=%d bytes\n", 4328 ioc->name, mem, sz)); 4329 mem = kmalloc(sz, GFP_ATOMIC); 4330 if (mem == NULL) 4331 return -1; 4332 4333 ioc->RequestNB = (int *) mem; 4334 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestNB alloc @ %p, sz=%d bytes\n", 4335 ioc->name, mem, sz)); 4336 } 4337 for (ii = 0; ii < ioc->req_depth; ii++) { 4338 ioc->ReqToChain[ii] = MPT_HOST_NO_CHAIN; 4339 } 4340 4341 /* ChainToChain size must equal the total number 4342 * of chain buffers to be allocated. 4343 * index = chain_idx 4344 * 4345 * Calculate the number of chain buffers needed(plus 1) per I/O 4346 * then multiply the maximum number of simultaneous cmds 4347 * 4348 * num_sge = num sge in request frame + last chain buffer 4349 * scale = num sge per chain buffer if no chain element 4350 */ 4351 scale = ioc->req_sz / ioc->SGE_size; 4352 if (ioc->sg_addr_size == sizeof(u64)) 4353 num_sge = scale + (ioc->req_sz - 60) / ioc->SGE_size; 4354 else 4355 num_sge = 1 + scale + (ioc->req_sz - 64) / ioc->SGE_size; 4356 4357 if (ioc->sg_addr_size == sizeof(u64)) { 4358 numSGE = (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale + 4359 (ioc->req_sz - 60) / ioc->SGE_size; 4360 } else { 4361 numSGE = 1 + (scale - 1) * (ioc->facts.MaxChainDepth-1) + 4362 scale + (ioc->req_sz - 64) / ioc->SGE_size; 4363 } 4364 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "num_sge=%d numSGE=%d\n", 4365 ioc->name, num_sge, numSGE)); 4366 4367 if (ioc->bus_type == FC) { 4368 if (numSGE > MPT_SCSI_FC_SG_DEPTH) 4369 numSGE = MPT_SCSI_FC_SG_DEPTH; 4370 } else { 4371 if (numSGE > MPT_SCSI_SG_DEPTH) 4372 numSGE = MPT_SCSI_SG_DEPTH; 4373 } 4374 4375 num_chain = 1; 4376 while (numSGE - num_sge > 0) { 4377 num_chain++; 4378 num_sge += (scale - 1); 4379 } 4380 num_chain++; 4381 4382 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Now numSGE=%d num_sge=%d num_chain=%d\n", 4383 ioc->name, numSGE, num_sge, num_chain)); 4384 4385 if (ioc->bus_type == SPI) 4386 num_chain *= MPT_SCSI_CAN_QUEUE; 4387 else if (ioc->bus_type == SAS) 4388 num_chain *= MPT_SAS_CAN_QUEUE; 4389 else 4390 num_chain *= MPT_FC_CAN_QUEUE; 4391 4392 ioc->num_chain = num_chain; 4393 4394 sz = num_chain * sizeof(int); 4395 if (ioc->ChainToChain == NULL) { 4396 mem = kmalloc(sz, GFP_ATOMIC); 4397 if (mem == NULL) 4398 return -1; 4399 4400 ioc->ChainToChain = (int *) mem; 4401 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainToChain alloc @ %p, sz=%d bytes\n", 4402 ioc->name, mem, sz)); 4403 } else { 4404 mem = (u8 *) ioc->ChainToChain; 4405 } 4406 memset(mem, 0xFF, sz); 4407 return num_chain; 4408 } 4409 4410 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4411 /** 4412 * PrimeIocFifos - Initialize IOC request and reply FIFOs. 4413 * @ioc: Pointer to MPT_ADAPTER structure 4414 * 4415 * This routine allocates memory for the MPT reply and request frame 4416 * pools (if necessary), and primes the IOC reply FIFO with 4417 * reply frames. 4418 * 4419 * Returns 0 for success, non-zero for failure. 4420 */ 4421 static int 4422 PrimeIocFifos(MPT_ADAPTER *ioc) 4423 { 4424 MPT_FRAME_HDR *mf; 4425 unsigned long flags; 4426 dma_addr_t alloc_dma; 4427 u8 *mem; 4428 int i, reply_sz, sz, total_size, num_chain; 4429 u64 dma_mask; 4430 4431 dma_mask = 0; 4432 4433 /* Prime reply FIFO... */ 4434 4435 if (ioc->reply_frames == NULL) { 4436 if ( (num_chain = initChainBuffers(ioc)) < 0) 4437 return -1; 4438 /* 4439 * 1078 errata workaround for the 36GB limitation 4440 */ 4441 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078 && 4442 ioc->dma_mask > DMA_BIT_MASK(35)) { 4443 if (!pci_set_dma_mask(ioc->pcidev, DMA_BIT_MASK(32)) 4444 && !pci_set_consistent_dma_mask(ioc->pcidev, 4445 DMA_BIT_MASK(32))) { 4446 dma_mask = DMA_BIT_MASK(35); 4447 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT 4448 "setting 35 bit addressing for " 4449 "Request/Reply/Chain and Sense Buffers\n", 4450 ioc->name)); 4451 } else { 4452 /*Reseting DMA mask to 64 bit*/ 4453 pci_set_dma_mask(ioc->pcidev, 4454 DMA_BIT_MASK(64)); 4455 pci_set_consistent_dma_mask(ioc->pcidev, 4456 DMA_BIT_MASK(64)); 4457 4458 printk(MYIOC_s_ERR_FMT 4459 "failed setting 35 bit addressing for " 4460 "Request/Reply/Chain and Sense Buffers\n", 4461 ioc->name); 4462 return -1; 4463 } 4464 } 4465 4466 total_size = reply_sz = (ioc->reply_sz * ioc->reply_depth); 4467 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d bytes, ReplyDepth=%d\n", 4468 ioc->name, ioc->reply_sz, ioc->reply_depth)); 4469 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d[%x] bytes\n", 4470 ioc->name, reply_sz, reply_sz)); 4471 4472 sz = (ioc->req_sz * ioc->req_depth); 4473 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d bytes, RequestDepth=%d\n", 4474 ioc->name, ioc->req_sz, ioc->req_depth)); 4475 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d[%x] bytes\n", 4476 ioc->name, sz, sz)); 4477 total_size += sz; 4478 4479 sz = num_chain * ioc->req_sz; /* chain buffer pool size */ 4480 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d bytes, ChainDepth=%d\n", 4481 ioc->name, ioc->req_sz, num_chain)); 4482 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d[%x] bytes num_chain=%d\n", 4483 ioc->name, sz, sz, num_chain)); 4484 4485 total_size += sz; 4486 mem = pci_alloc_consistent(ioc->pcidev, total_size, &alloc_dma); 4487 if (mem == NULL) { 4488 printk(MYIOC_s_ERR_FMT "Unable to allocate Reply, Request, Chain Buffers!\n", 4489 ioc->name); 4490 goto out_fail; 4491 } 4492 4493 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Total alloc @ %p[%p], sz=%d[%x] bytes\n", 4494 ioc->name, mem, (void *)(ulong)alloc_dma, total_size, total_size)); 4495 4496 memset(mem, 0, total_size); 4497 ioc->alloc_total += total_size; 4498 ioc->alloc = mem; 4499 ioc->alloc_dma = alloc_dma; 4500 ioc->alloc_sz = total_size; 4501 ioc->reply_frames = (MPT_FRAME_HDR *) mem; 4502 ioc->reply_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF); 4503 4504 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n", 4505 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma)); 4506 4507 alloc_dma += reply_sz; 4508 mem += reply_sz; 4509 4510 /* Request FIFO - WE manage this! */ 4511 4512 ioc->req_frames = (MPT_FRAME_HDR *) mem; 4513 ioc->req_frames_dma = alloc_dma; 4514 4515 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffers @ %p[%p]\n", 4516 ioc->name, mem, (void *)(ulong)alloc_dma)); 4517 4518 ioc->req_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF); 4519 4520 #if defined(CONFIG_MTRR) && 0 4521 /* 4522 * Enable Write Combining MTRR for IOC's memory region. 4523 * (at least as much as we can; "size and base must be 4524 * multiples of 4 kiB" 4525 */ 4526 ioc->mtrr_reg = mtrr_add(ioc->req_frames_dma, 4527 sz, 4528 MTRR_TYPE_WRCOMB, 1); 4529 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "MTRR region registered (base:size=%08x:%x)\n", 4530 ioc->name, ioc->req_frames_dma, sz)); 4531 #endif 4532 4533 for (i = 0; i < ioc->req_depth; i++) { 4534 alloc_dma += ioc->req_sz; 4535 mem += ioc->req_sz; 4536 } 4537 4538 ioc->ChainBuffer = mem; 4539 ioc->ChainBufferDMA = alloc_dma; 4540 4541 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffers @ %p(%p)\n", 4542 ioc->name, ioc->ChainBuffer, (void *)(ulong)ioc->ChainBufferDMA)); 4543 4544 /* Initialize the free chain Q. 4545 */ 4546 4547 INIT_LIST_HEAD(&ioc->FreeChainQ); 4548 4549 /* Post the chain buffers to the FreeChainQ. 4550 */ 4551 mem = (u8 *)ioc->ChainBuffer; 4552 for (i=0; i < num_chain; i++) { 4553 mf = (MPT_FRAME_HDR *) mem; 4554 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeChainQ); 4555 mem += ioc->req_sz; 4556 } 4557 4558 /* Initialize Request frames linked list 4559 */ 4560 alloc_dma = ioc->req_frames_dma; 4561 mem = (u8 *) ioc->req_frames; 4562 4563 spin_lock_irqsave(&ioc->FreeQlock, flags); 4564 INIT_LIST_HEAD(&ioc->FreeQ); 4565 for (i = 0; i < ioc->req_depth; i++) { 4566 mf = (MPT_FRAME_HDR *) mem; 4567 4568 /* Queue REQUESTs *internally*! */ 4569 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ); 4570 4571 mem += ioc->req_sz; 4572 } 4573 spin_unlock_irqrestore(&ioc->FreeQlock, flags); 4574 4575 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC); 4576 ioc->sense_buf_pool = 4577 pci_alloc_consistent(ioc->pcidev, sz, &ioc->sense_buf_pool_dma); 4578 if (ioc->sense_buf_pool == NULL) { 4579 printk(MYIOC_s_ERR_FMT "Unable to allocate Sense Buffers!\n", 4580 ioc->name); 4581 goto out_fail; 4582 } 4583 4584 ioc->sense_buf_low_dma = (u32) (ioc->sense_buf_pool_dma & 0xFFFFFFFF); 4585 ioc->alloc_total += sz; 4586 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SenseBuffers @ %p[%p]\n", 4587 ioc->name, ioc->sense_buf_pool, (void *)(ulong)ioc->sense_buf_pool_dma)); 4588 4589 } 4590 4591 /* Post Reply frames to FIFO 4592 */ 4593 alloc_dma = ioc->alloc_dma; 4594 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n", 4595 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma)); 4596 4597 for (i = 0; i < ioc->reply_depth; i++) { 4598 /* Write each address to the IOC! */ 4599 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, alloc_dma); 4600 alloc_dma += ioc->reply_sz; 4601 } 4602 4603 if (dma_mask == DMA_BIT_MASK(35) && !pci_set_dma_mask(ioc->pcidev, 4604 ioc->dma_mask) && !pci_set_consistent_dma_mask(ioc->pcidev, 4605 ioc->dma_mask)) 4606 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT 4607 "restoring 64 bit addressing\n", ioc->name)); 4608 4609 return 0; 4610 4611 out_fail: 4612 4613 if (ioc->alloc != NULL) { 4614 sz = ioc->alloc_sz; 4615 pci_free_consistent(ioc->pcidev, 4616 sz, 4617 ioc->alloc, ioc->alloc_dma); 4618 ioc->reply_frames = NULL; 4619 ioc->req_frames = NULL; 4620 ioc->alloc_total -= sz; 4621 } 4622 if (ioc->sense_buf_pool != NULL) { 4623 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC); 4624 pci_free_consistent(ioc->pcidev, 4625 sz, 4626 ioc->sense_buf_pool, ioc->sense_buf_pool_dma); 4627 ioc->sense_buf_pool = NULL; 4628 } 4629 4630 if (dma_mask == DMA_BIT_MASK(35) && !pci_set_dma_mask(ioc->pcidev, 4631 DMA_BIT_MASK(64)) && !pci_set_consistent_dma_mask(ioc->pcidev, 4632 DMA_BIT_MASK(64))) 4633 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT 4634 "restoring 64 bit addressing\n", ioc->name)); 4635 4636 return -1; 4637 } 4638 4639 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4640 /** 4641 * mpt_handshake_req_reply_wait - Send MPT request to and receive reply 4642 * from IOC via doorbell handshake method. 4643 * @ioc: Pointer to MPT_ADAPTER structure 4644 * @reqBytes: Size of the request in bytes 4645 * @req: Pointer to MPT request frame 4646 * @replyBytes: Expected size of the reply in bytes 4647 * @u16reply: Pointer to area where reply should be written 4648 * @maxwait: Max wait time for a reply (in seconds) 4649 * @sleepFlag: Specifies whether the process can sleep 4650 * 4651 * NOTES: It is the callers responsibility to byte-swap fields in the 4652 * request which are greater than 1 byte in size. It is also the 4653 * callers responsibility to byte-swap response fields which are 4654 * greater than 1 byte in size. 4655 * 4656 * Returns 0 for success, non-zero for failure. 4657 */ 4658 static int 4659 mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, u32 *req, 4660 int replyBytes, u16 *u16reply, int maxwait, int sleepFlag) 4661 { 4662 MPIDefaultReply_t *mptReply; 4663 int failcnt = 0; 4664 int t; 4665 4666 /* 4667 * Get ready to cache a handshake reply 4668 */ 4669 ioc->hs_reply_idx = 0; 4670 mptReply = (MPIDefaultReply_t *) ioc->hs_reply; 4671 mptReply->MsgLength = 0; 4672 4673 /* 4674 * Make sure there are no doorbells (WRITE 0 to IntStatus reg), 4675 * then tell IOC that we want to handshake a request of N words. 4676 * (WRITE u32val to Doorbell reg). 4677 */ 4678 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 4679 CHIPREG_WRITE32(&ioc->chip->Doorbell, 4680 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) | 4681 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT))); 4682 4683 /* 4684 * Wait for IOC's doorbell handshake int 4685 */ 4686 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) 4687 failcnt++; 4688 4689 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request start reqBytes=%d, WaitCnt=%d%s\n", 4690 ioc->name, reqBytes, t, failcnt ? " - MISSING DOORBELL HANDSHAKE!" : "")); 4691 4692 /* Read doorbell and check for active bit */ 4693 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE)) 4694 return -1; 4695 4696 /* 4697 * Clear doorbell int (WRITE 0 to IntStatus reg), 4698 * then wait for IOC to ACKnowledge that it's ready for 4699 * our handshake request. 4700 */ 4701 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 4702 if (!failcnt && (t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) 4703 failcnt++; 4704 4705 if (!failcnt) { 4706 int ii; 4707 u8 *req_as_bytes = (u8 *) req; 4708 4709 /* 4710 * Stuff request words via doorbell handshake, 4711 * with ACK from IOC for each. 4712 */ 4713 for (ii = 0; !failcnt && ii < reqBytes/4; ii++) { 4714 u32 word = ((req_as_bytes[(ii*4) + 0] << 0) | 4715 (req_as_bytes[(ii*4) + 1] << 8) | 4716 (req_as_bytes[(ii*4) + 2] << 16) | 4717 (req_as_bytes[(ii*4) + 3] << 24)); 4718 4719 CHIPREG_WRITE32(&ioc->chip->Doorbell, word); 4720 if ((t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) 4721 failcnt++; 4722 } 4723 4724 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handshake request frame (@%p) header\n", ioc->name, req)); 4725 DBG_DUMP_REQUEST_FRAME_HDR(ioc, (u32 *)req); 4726 4727 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request post done, WaitCnt=%d%s\n", 4728 ioc->name, t, failcnt ? " - MISSING DOORBELL ACK!" : "")); 4729 4730 /* 4731 * Wait for completion of doorbell handshake reply from the IOC 4732 */ 4733 if (!failcnt && (t = WaitForDoorbellReply(ioc, maxwait, sleepFlag)) < 0) 4734 failcnt++; 4735 4736 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake reply count=%d%s\n", 4737 ioc->name, t, failcnt ? " - MISSING DOORBELL REPLY!" : "")); 4738 4739 /* 4740 * Copy out the cached reply... 4741 */ 4742 for (ii=0; ii < min(replyBytes/2,mptReply->MsgLength*2); ii++) 4743 u16reply[ii] = ioc->hs_reply[ii]; 4744 } else { 4745 return -99; 4746 } 4747 4748 return -failcnt; 4749 } 4750 4751 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4752 /** 4753 * WaitForDoorbellAck - Wait for IOC doorbell handshake acknowledge 4754 * @ioc: Pointer to MPT_ADAPTER structure 4755 * @howlong: How long to wait (in seconds) 4756 * @sleepFlag: Specifies whether the process can sleep 4757 * 4758 * This routine waits (up to ~2 seconds max) for IOC doorbell 4759 * handshake ACKnowledge, indicated by the IOP_DOORBELL_STATUS 4760 * bit in its IntStatus register being clear. 4761 * 4762 * Returns a negative value on failure, else wait loop count. 4763 */ 4764 static int 4765 WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag) 4766 { 4767 int cntdn; 4768 int count = 0; 4769 u32 intstat=0; 4770 4771 cntdn = 1000 * howlong; 4772 4773 if (sleepFlag == CAN_SLEEP) { 4774 while (--cntdn) { 4775 msleep (1); 4776 intstat = CHIPREG_READ32(&ioc->chip->IntStatus); 4777 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS)) 4778 break; 4779 count++; 4780 } 4781 } else { 4782 while (--cntdn) { 4783 udelay (1000); 4784 intstat = CHIPREG_READ32(&ioc->chip->IntStatus); 4785 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS)) 4786 break; 4787 count++; 4788 } 4789 } 4790 4791 if (cntdn) { 4792 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell ACK (count=%d)\n", 4793 ioc->name, count)); 4794 return count; 4795 } 4796 4797 printk(MYIOC_s_ERR_FMT "Doorbell ACK timeout (count=%d), IntStatus=%x!\n", 4798 ioc->name, count, intstat); 4799 return -1; 4800 } 4801 4802 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4803 /** 4804 * WaitForDoorbellInt - Wait for IOC to set its doorbell interrupt bit 4805 * @ioc: Pointer to MPT_ADAPTER structure 4806 * @howlong: How long to wait (in seconds) 4807 * @sleepFlag: Specifies whether the process can sleep 4808 * 4809 * This routine waits (up to ~2 seconds max) for IOC doorbell interrupt 4810 * (MPI_HIS_DOORBELL_INTERRUPT) to be set in the IntStatus register. 4811 * 4812 * Returns a negative value on failure, else wait loop count. 4813 */ 4814 static int 4815 WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag) 4816 { 4817 int cntdn; 4818 int count = 0; 4819 u32 intstat=0; 4820 4821 cntdn = 1000 * howlong; 4822 if (sleepFlag == CAN_SLEEP) { 4823 while (--cntdn) { 4824 intstat = CHIPREG_READ32(&ioc->chip->IntStatus); 4825 if (intstat & MPI_HIS_DOORBELL_INTERRUPT) 4826 break; 4827 msleep(1); 4828 count++; 4829 } 4830 } else { 4831 while (--cntdn) { 4832 intstat = CHIPREG_READ32(&ioc->chip->IntStatus); 4833 if (intstat & MPI_HIS_DOORBELL_INTERRUPT) 4834 break; 4835 udelay (1000); 4836 count++; 4837 } 4838 } 4839 4840 if (cntdn) { 4841 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell INT (cnt=%d) howlong=%d\n", 4842 ioc->name, count, howlong)); 4843 return count; 4844 } 4845 4846 printk(MYIOC_s_ERR_FMT "Doorbell INT timeout (count=%d), IntStatus=%x!\n", 4847 ioc->name, count, intstat); 4848 return -1; 4849 } 4850 4851 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4852 /** 4853 * WaitForDoorbellReply - Wait for and capture an IOC handshake reply. 4854 * @ioc: Pointer to MPT_ADAPTER structure 4855 * @howlong: How long to wait (in seconds) 4856 * @sleepFlag: Specifies whether the process can sleep 4857 * 4858 * This routine polls the IOC for a handshake reply, 16 bits at a time. 4859 * Reply is cached to IOC private area large enough to hold a maximum 4860 * of 128 bytes of reply data. 4861 * 4862 * Returns a negative value on failure, else size of reply in WORDS. 4863 */ 4864 static int 4865 WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag) 4866 { 4867 int u16cnt = 0; 4868 int failcnt = 0; 4869 int t; 4870 u16 *hs_reply = ioc->hs_reply; 4871 volatile MPIDefaultReply_t *mptReply = (MPIDefaultReply_t *) ioc->hs_reply; 4872 u16 hword; 4873 4874 hs_reply[0] = hs_reply[1] = hs_reply[7] = 0; 4875 4876 /* 4877 * Get first two u16's so we can look at IOC's intended reply MsgLength 4878 */ 4879 u16cnt=0; 4880 if ((t = WaitForDoorbellInt(ioc, howlong, sleepFlag)) < 0) { 4881 failcnt++; 4882 } else { 4883 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF); 4884 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 4885 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) 4886 failcnt++; 4887 else { 4888 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF); 4889 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 4890 } 4891 } 4892 4893 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitCnt=%d First handshake reply word=%08x%s\n", 4894 ioc->name, t, le32_to_cpu(*(u32 *)hs_reply), 4895 failcnt ? " - MISSING DOORBELL HANDSHAKE!" : "")); 4896 4897 /* 4898 * If no error (and IOC said MsgLength is > 0), piece together 4899 * reply 16 bits at a time. 4900 */ 4901 for (u16cnt=2; !failcnt && u16cnt < (2 * mptReply->MsgLength); u16cnt++) { 4902 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) 4903 failcnt++; 4904 hword = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF); 4905 /* don't overflow our IOC hs_reply[] buffer! */ 4906 if (u16cnt < ARRAY_SIZE(ioc->hs_reply)) 4907 hs_reply[u16cnt] = hword; 4908 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 4909 } 4910 4911 if (!failcnt && (t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) 4912 failcnt++; 4913 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 4914 4915 if (failcnt) { 4916 printk(MYIOC_s_ERR_FMT "Handshake reply failure!\n", 4917 ioc->name); 4918 return -failcnt; 4919 } 4920 #if 0 4921 else if (u16cnt != (2 * mptReply->MsgLength)) { 4922 return -101; 4923 } 4924 else if ((mptReply->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) { 4925 return -102; 4926 } 4927 #endif 4928 4929 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got Handshake reply:\n", ioc->name)); 4930 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mptReply); 4931 4932 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell REPLY WaitCnt=%d (sz=%d)\n", 4933 ioc->name, t, u16cnt/2)); 4934 return u16cnt/2; 4935 } 4936 4937 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4938 /** 4939 * GetLanConfigPages - Fetch LANConfig pages. 4940 * @ioc: Pointer to MPT_ADAPTER structure 4941 * 4942 * Return: 0 for success 4943 * -ENOMEM if no memory available 4944 * -EPERM if not allowed due to ISR context 4945 * -EAGAIN if no msg frames currently available 4946 * -EFAULT for non-successful reply or no reply (timeout) 4947 */ 4948 static int 4949 GetLanConfigPages(MPT_ADAPTER *ioc) 4950 { 4951 ConfigPageHeader_t hdr; 4952 CONFIGPARMS cfg; 4953 LANPage0_t *ppage0_alloc; 4954 dma_addr_t page0_dma; 4955 LANPage1_t *ppage1_alloc; 4956 dma_addr_t page1_dma; 4957 int rc = 0; 4958 int data_sz; 4959 int copy_sz; 4960 4961 /* Get LAN Page 0 header */ 4962 hdr.PageVersion = 0; 4963 hdr.PageLength = 0; 4964 hdr.PageNumber = 0; 4965 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN; 4966 cfg.cfghdr.hdr = &hdr; 4967 cfg.physAddr = -1; 4968 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 4969 cfg.dir = 0; 4970 cfg.pageAddr = 0; 4971 cfg.timeout = 0; 4972 4973 if ((rc = mpt_config(ioc, &cfg)) != 0) 4974 return rc; 4975 4976 if (hdr.PageLength > 0) { 4977 data_sz = hdr.PageLength * 4; 4978 ppage0_alloc = (LANPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma); 4979 rc = -ENOMEM; 4980 if (ppage0_alloc) { 4981 memset((u8 *)ppage0_alloc, 0, data_sz); 4982 cfg.physAddr = page0_dma; 4983 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 4984 4985 if ((rc = mpt_config(ioc, &cfg)) == 0) { 4986 /* save the data */ 4987 copy_sz = min_t(int, sizeof(LANPage0_t), data_sz); 4988 memcpy(&ioc->lan_cnfg_page0, ppage0_alloc, copy_sz); 4989 4990 } 4991 4992 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma); 4993 4994 /* FIXME! 4995 * Normalize endianness of structure data, 4996 * by byte-swapping all > 1 byte fields! 4997 */ 4998 4999 } 5000 5001 if (rc) 5002 return rc; 5003 } 5004 5005 /* Get LAN Page 1 header */ 5006 hdr.PageVersion = 0; 5007 hdr.PageLength = 0; 5008 hdr.PageNumber = 1; 5009 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN; 5010 cfg.cfghdr.hdr = &hdr; 5011 cfg.physAddr = -1; 5012 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5013 cfg.dir = 0; 5014 cfg.pageAddr = 0; 5015 5016 if ((rc = mpt_config(ioc, &cfg)) != 0) 5017 return rc; 5018 5019 if (hdr.PageLength == 0) 5020 return 0; 5021 5022 data_sz = hdr.PageLength * 4; 5023 rc = -ENOMEM; 5024 ppage1_alloc = (LANPage1_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page1_dma); 5025 if (ppage1_alloc) { 5026 memset((u8 *)ppage1_alloc, 0, data_sz); 5027 cfg.physAddr = page1_dma; 5028 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5029 5030 if ((rc = mpt_config(ioc, &cfg)) == 0) { 5031 /* save the data */ 5032 copy_sz = min_t(int, sizeof(LANPage1_t), data_sz); 5033 memcpy(&ioc->lan_cnfg_page1, ppage1_alloc, copy_sz); 5034 } 5035 5036 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage1_alloc, page1_dma); 5037 5038 /* FIXME! 5039 * Normalize endianness of structure data, 5040 * by byte-swapping all > 1 byte fields! 5041 */ 5042 5043 } 5044 5045 return rc; 5046 } 5047 5048 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 5049 /** 5050 * mptbase_sas_persist_operation - Perform operation on SAS Persistent Table 5051 * @ioc: Pointer to MPT_ADAPTER structure 5052 * @persist_opcode: see below 5053 * 5054 * MPI_SAS_OP_CLEAR_NOT_PRESENT - Free all persist TargetID mappings for 5055 * devices not currently present. 5056 * MPI_SAS_OP_CLEAR_ALL_PERSISTENT - Clear al persist TargetID mappings 5057 * 5058 * NOTE: Don't use not this function during interrupt time. 5059 * 5060 * Returns 0 for success, non-zero error 5061 */ 5062 5063 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 5064 int 5065 mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode) 5066 { 5067 SasIoUnitControlRequest_t *sasIoUnitCntrReq; 5068 SasIoUnitControlReply_t *sasIoUnitCntrReply; 5069 MPT_FRAME_HDR *mf = NULL; 5070 MPIHeader_t *mpi_hdr; 5071 int ret = 0; 5072 unsigned long timeleft; 5073 5074 mutex_lock(&ioc->mptbase_cmds.mutex); 5075 5076 /* init the internal cmd struct */ 5077 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE); 5078 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status) 5079 5080 /* insure garbage is not sent to fw */ 5081 switch(persist_opcode) { 5082 5083 case MPI_SAS_OP_CLEAR_NOT_PRESENT: 5084 case MPI_SAS_OP_CLEAR_ALL_PERSISTENT: 5085 break; 5086 5087 default: 5088 ret = -1; 5089 goto out; 5090 } 5091 5092 printk(KERN_DEBUG "%s: persist_opcode=%x\n", 5093 __func__, persist_opcode); 5094 5095 /* Get a MF for this command. 5096 */ 5097 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) { 5098 printk(KERN_DEBUG "%s: no msg frames!\n", __func__); 5099 ret = -1; 5100 goto out; 5101 } 5102 5103 mpi_hdr = (MPIHeader_t *) mf; 5104 sasIoUnitCntrReq = (SasIoUnitControlRequest_t *)mf; 5105 memset(sasIoUnitCntrReq,0,sizeof(SasIoUnitControlRequest_t)); 5106 sasIoUnitCntrReq->Function = MPI_FUNCTION_SAS_IO_UNIT_CONTROL; 5107 sasIoUnitCntrReq->MsgContext = mpi_hdr->MsgContext; 5108 sasIoUnitCntrReq->Operation = persist_opcode; 5109 5110 mpt_put_msg_frame(mpt_base_index, ioc, mf); 5111 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done, 10*HZ); 5112 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { 5113 ret = -ETIME; 5114 printk(KERN_DEBUG "%s: failed\n", __func__); 5115 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) 5116 goto out; 5117 if (!timeleft) { 5118 printk(MYIOC_s_WARN_FMT 5119 "Issuing Reset from %s!!, doorbell=0x%08x\n", 5120 ioc->name, __func__, mpt_GetIocState(ioc, 0)); 5121 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); 5122 mpt_free_msg_frame(ioc, mf); 5123 } 5124 goto out; 5125 } 5126 5127 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) { 5128 ret = -1; 5129 goto out; 5130 } 5131 5132 sasIoUnitCntrReply = 5133 (SasIoUnitControlReply_t *)ioc->mptbase_cmds.reply; 5134 if (le16_to_cpu(sasIoUnitCntrReply->IOCStatus) != MPI_IOCSTATUS_SUCCESS) { 5135 printk(KERN_DEBUG "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n", 5136 __func__, sasIoUnitCntrReply->IOCStatus, 5137 sasIoUnitCntrReply->IOCLogInfo); 5138 printk(KERN_DEBUG "%s: failed\n", __func__); 5139 ret = -1; 5140 } else 5141 printk(KERN_DEBUG "%s: success\n", __func__); 5142 out: 5143 5144 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status) 5145 mutex_unlock(&ioc->mptbase_cmds.mutex); 5146 return ret; 5147 } 5148 5149 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 5150 5151 static void 5152 mptbase_raid_process_event_data(MPT_ADAPTER *ioc, 5153 MpiEventDataRaid_t * pRaidEventData) 5154 { 5155 int volume; 5156 int reason; 5157 int disk; 5158 int status; 5159 int flags; 5160 int state; 5161 5162 volume = pRaidEventData->VolumeID; 5163 reason = pRaidEventData->ReasonCode; 5164 disk = pRaidEventData->PhysDiskNum; 5165 status = le32_to_cpu(pRaidEventData->SettingsStatus); 5166 flags = (status >> 0) & 0xff; 5167 state = (status >> 8) & 0xff; 5168 5169 if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) { 5170 return; 5171 } 5172 5173 if ((reason >= MPI_EVENT_RAID_RC_PHYSDISK_CREATED && 5174 reason <= MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED) || 5175 (reason == MPI_EVENT_RAID_RC_SMART_DATA)) { 5176 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d id=%d\n", 5177 ioc->name, disk, volume); 5178 } else { 5179 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for VolumeID %d\n", 5180 ioc->name, volume); 5181 } 5182 5183 switch(reason) { 5184 case MPI_EVENT_RAID_RC_VOLUME_CREATED: 5185 printk(MYIOC_s_INFO_FMT " volume has been created\n", 5186 ioc->name); 5187 break; 5188 5189 case MPI_EVENT_RAID_RC_VOLUME_DELETED: 5190 5191 printk(MYIOC_s_INFO_FMT " volume has been deleted\n", 5192 ioc->name); 5193 break; 5194 5195 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED: 5196 printk(MYIOC_s_INFO_FMT " volume settings have been changed\n", 5197 ioc->name); 5198 break; 5199 5200 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED: 5201 printk(MYIOC_s_INFO_FMT " volume is now %s%s%s%s\n", 5202 ioc->name, 5203 state == MPI_RAIDVOL0_STATUS_STATE_OPTIMAL 5204 ? "optimal" 5205 : state == MPI_RAIDVOL0_STATUS_STATE_DEGRADED 5206 ? "degraded" 5207 : state == MPI_RAIDVOL0_STATUS_STATE_FAILED 5208 ? "failed" 5209 : "state unknown", 5210 flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED 5211 ? ", enabled" : "", 5212 flags & MPI_RAIDVOL0_STATUS_FLAG_QUIESCED 5213 ? ", quiesced" : "", 5214 flags & MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS 5215 ? ", resync in progress" : "" ); 5216 break; 5217 5218 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED: 5219 printk(MYIOC_s_INFO_FMT " volume membership of PhysDisk %d has changed\n", 5220 ioc->name, disk); 5221 break; 5222 5223 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED: 5224 printk(MYIOC_s_INFO_FMT " PhysDisk has been created\n", 5225 ioc->name); 5226 break; 5227 5228 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED: 5229 printk(MYIOC_s_INFO_FMT " PhysDisk has been deleted\n", 5230 ioc->name); 5231 break; 5232 5233 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED: 5234 printk(MYIOC_s_INFO_FMT " PhysDisk settings have been changed\n", 5235 ioc->name); 5236 break; 5237 5238 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED: 5239 printk(MYIOC_s_INFO_FMT " PhysDisk is now %s%s%s\n", 5240 ioc->name, 5241 state == MPI_PHYSDISK0_STATUS_ONLINE 5242 ? "online" 5243 : state == MPI_PHYSDISK0_STATUS_MISSING 5244 ? "missing" 5245 : state == MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE 5246 ? "not compatible" 5247 : state == MPI_PHYSDISK0_STATUS_FAILED 5248 ? "failed" 5249 : state == MPI_PHYSDISK0_STATUS_INITIALIZING 5250 ? "initializing" 5251 : state == MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED 5252 ? "offline requested" 5253 : state == MPI_PHYSDISK0_STATUS_FAILED_REQUESTED 5254 ? "failed requested" 5255 : state == MPI_PHYSDISK0_STATUS_OTHER_OFFLINE 5256 ? "offline" 5257 : "state unknown", 5258 flags & MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC 5259 ? ", out of sync" : "", 5260 flags & MPI_PHYSDISK0_STATUS_FLAG_QUIESCED 5261 ? ", quiesced" : "" ); 5262 break; 5263 5264 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED: 5265 printk(MYIOC_s_INFO_FMT " Domain Validation needed for PhysDisk %d\n", 5266 ioc->name, disk); 5267 break; 5268 5269 case MPI_EVENT_RAID_RC_SMART_DATA: 5270 printk(MYIOC_s_INFO_FMT " SMART data received, ASC/ASCQ = %02xh/%02xh\n", 5271 ioc->name, pRaidEventData->ASC, pRaidEventData->ASCQ); 5272 break; 5273 5274 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED: 5275 printk(MYIOC_s_INFO_FMT " replacement of PhysDisk %d has started\n", 5276 ioc->name, disk); 5277 break; 5278 } 5279 } 5280 5281 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 5282 /** 5283 * GetIoUnitPage2 - Retrieve BIOS version and boot order information. 5284 * @ioc: Pointer to MPT_ADAPTER structure 5285 * 5286 * Returns: 0 for success 5287 * -ENOMEM if no memory available 5288 * -EPERM if not allowed due to ISR context 5289 * -EAGAIN if no msg frames currently available 5290 * -EFAULT for non-successful reply or no reply (timeout) 5291 */ 5292 static int 5293 GetIoUnitPage2(MPT_ADAPTER *ioc) 5294 { 5295 ConfigPageHeader_t hdr; 5296 CONFIGPARMS cfg; 5297 IOUnitPage2_t *ppage_alloc; 5298 dma_addr_t page_dma; 5299 int data_sz; 5300 int rc; 5301 5302 /* Get the page header */ 5303 hdr.PageVersion = 0; 5304 hdr.PageLength = 0; 5305 hdr.PageNumber = 2; 5306 hdr.PageType = MPI_CONFIG_PAGETYPE_IO_UNIT; 5307 cfg.cfghdr.hdr = &hdr; 5308 cfg.physAddr = -1; 5309 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5310 cfg.dir = 0; 5311 cfg.pageAddr = 0; 5312 cfg.timeout = 0; 5313 5314 if ((rc = mpt_config(ioc, &cfg)) != 0) 5315 return rc; 5316 5317 if (hdr.PageLength == 0) 5318 return 0; 5319 5320 /* Read the config page */ 5321 data_sz = hdr.PageLength * 4; 5322 rc = -ENOMEM; 5323 ppage_alloc = (IOUnitPage2_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page_dma); 5324 if (ppage_alloc) { 5325 memset((u8 *)ppage_alloc, 0, data_sz); 5326 cfg.physAddr = page_dma; 5327 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5328 5329 /* If Good, save data */ 5330 if ((rc = mpt_config(ioc, &cfg)) == 0) 5331 ioc->biosVersion = le32_to_cpu(ppage_alloc->BiosVersion); 5332 5333 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage_alloc, page_dma); 5334 } 5335 5336 return rc; 5337 } 5338 5339 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 5340 /** 5341 * mpt_GetScsiPortSettings - read SCSI Port Page 0 and 2 5342 * @ioc: Pointer to a Adapter Strucutre 5343 * @portnum: IOC port number 5344 * 5345 * Return: -EFAULT if read of config page header fails 5346 * or if no nvram 5347 * If read of SCSI Port Page 0 fails, 5348 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF) 5349 * Adapter settings: async, narrow 5350 * Return 1 5351 * If read of SCSI Port Page 2 fails, 5352 * Adapter settings valid 5353 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF) 5354 * Return 1 5355 * Else 5356 * Both valid 5357 * Return 0 5358 * CHECK - what type of locking mechanisms should be used???? 5359 */ 5360 static int 5361 mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum) 5362 { 5363 u8 *pbuf; 5364 dma_addr_t buf_dma; 5365 CONFIGPARMS cfg; 5366 ConfigPageHeader_t header; 5367 int ii; 5368 int data, rc = 0; 5369 5370 /* Allocate memory 5371 */ 5372 if (!ioc->spi_data.nvram) { 5373 int sz; 5374 u8 *mem; 5375 sz = MPT_MAX_SCSI_DEVICES * sizeof(int); 5376 mem = kmalloc(sz, GFP_ATOMIC); 5377 if (mem == NULL) 5378 return -EFAULT; 5379 5380 ioc->spi_data.nvram = (int *) mem; 5381 5382 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SCSI device NVRAM settings @ %p, sz=%d\n", 5383 ioc->name, ioc->spi_data.nvram, sz)); 5384 } 5385 5386 /* Invalidate NVRAM information 5387 */ 5388 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) { 5389 ioc->spi_data.nvram[ii] = MPT_HOST_NVRAM_INVALID; 5390 } 5391 5392 /* Read SPP0 header, allocate memory, then read page. 5393 */ 5394 header.PageVersion = 0; 5395 header.PageLength = 0; 5396 header.PageNumber = 0; 5397 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT; 5398 cfg.cfghdr.hdr = &header; 5399 cfg.physAddr = -1; 5400 cfg.pageAddr = portnum; 5401 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5402 cfg.dir = 0; 5403 cfg.timeout = 0; /* use default */ 5404 if (mpt_config(ioc, &cfg) != 0) 5405 return -EFAULT; 5406 5407 if (header.PageLength > 0) { 5408 pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma); 5409 if (pbuf) { 5410 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5411 cfg.physAddr = buf_dma; 5412 if (mpt_config(ioc, &cfg) != 0) { 5413 ioc->spi_data.maxBusWidth = MPT_NARROW; 5414 ioc->spi_data.maxSyncOffset = 0; 5415 ioc->spi_data.minSyncFactor = MPT_ASYNC; 5416 ioc->spi_data.busType = MPT_HOST_BUS_UNKNOWN; 5417 rc = 1; 5418 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT 5419 "Unable to read PortPage0 minSyncFactor=%x\n", 5420 ioc->name, ioc->spi_data.minSyncFactor)); 5421 } else { 5422 /* Save the Port Page 0 data 5423 */ 5424 SCSIPortPage0_t *pPP0 = (SCSIPortPage0_t *) pbuf; 5425 pPP0->Capabilities = le32_to_cpu(pPP0->Capabilities); 5426 pPP0->PhysicalInterface = le32_to_cpu(pPP0->PhysicalInterface); 5427 5428 if ( (pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_QAS) == 0 ) { 5429 ioc->spi_data.noQas |= MPT_TARGET_NO_NEGO_QAS; 5430 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT 5431 "noQas due to Capabilities=%x\n", 5432 ioc->name, pPP0->Capabilities)); 5433 } 5434 ioc->spi_data.maxBusWidth = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_WIDE ? 1 : 0; 5435 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK; 5436 if (data) { 5437 ioc->spi_data.maxSyncOffset = (u8) (data >> 16); 5438 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK; 5439 ioc->spi_data.minSyncFactor = (u8) (data >> 8); 5440 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT 5441 "PortPage0 minSyncFactor=%x\n", 5442 ioc->name, ioc->spi_data.minSyncFactor)); 5443 } else { 5444 ioc->spi_data.maxSyncOffset = 0; 5445 ioc->spi_data.minSyncFactor = MPT_ASYNC; 5446 } 5447 5448 ioc->spi_data.busType = pPP0->PhysicalInterface & MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK; 5449 5450 /* Update the minSyncFactor based on bus type. 5451 */ 5452 if ((ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD) || 5453 (ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE)) { 5454 5455 if (ioc->spi_data.minSyncFactor < MPT_ULTRA) { 5456 ioc->spi_data.minSyncFactor = MPT_ULTRA; 5457 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT 5458 "HVD or SE detected, minSyncFactor=%x\n", 5459 ioc->name, ioc->spi_data.minSyncFactor)); 5460 } 5461 } 5462 } 5463 if (pbuf) { 5464 pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma); 5465 } 5466 } 5467 } 5468 5469 /* SCSI Port Page 2 - Read the header then the page. 5470 */ 5471 header.PageVersion = 0; 5472 header.PageLength = 0; 5473 header.PageNumber = 2; 5474 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT; 5475 cfg.cfghdr.hdr = &header; 5476 cfg.physAddr = -1; 5477 cfg.pageAddr = portnum; 5478 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5479 cfg.dir = 0; 5480 if (mpt_config(ioc, &cfg) != 0) 5481 return -EFAULT; 5482 5483 if (header.PageLength > 0) { 5484 /* Allocate memory and read SCSI Port Page 2 5485 */ 5486 pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma); 5487 if (pbuf) { 5488 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_NVRAM; 5489 cfg.physAddr = buf_dma; 5490 if (mpt_config(ioc, &cfg) != 0) { 5491 /* Nvram data is left with INVALID mark 5492 */ 5493 rc = 1; 5494 } else if (ioc->pcidev->vendor == PCI_VENDOR_ID_ATTO) { 5495 5496 /* This is an ATTO adapter, read Page2 accordingly 5497 */ 5498 ATTO_SCSIPortPage2_t *pPP2 = (ATTO_SCSIPortPage2_t *) pbuf; 5499 ATTODeviceInfo_t *pdevice = NULL; 5500 u16 ATTOFlags; 5501 5502 /* Save the Port Page 2 data 5503 * (reformat into a 32bit quantity) 5504 */ 5505 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) { 5506 pdevice = &pPP2->DeviceSettings[ii]; 5507 ATTOFlags = le16_to_cpu(pdevice->ATTOFlags); 5508 data = 0; 5509 5510 /* Translate ATTO device flags to LSI format 5511 */ 5512 if (ATTOFlags & ATTOFLAG_DISC) 5513 data |= (MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE); 5514 if (ATTOFlags & ATTOFLAG_ID_ENB) 5515 data |= (MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE); 5516 if (ATTOFlags & ATTOFLAG_LUN_ENB) 5517 data |= (MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE); 5518 if (ATTOFlags & ATTOFLAG_TAGGED) 5519 data |= (MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE); 5520 if (!(ATTOFlags & ATTOFLAG_WIDE_ENB)) 5521 data |= (MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE); 5522 5523 data = (data << 16) | (pdevice->Period << 8) | 10; 5524 ioc->spi_data.nvram[ii] = data; 5525 } 5526 } else { 5527 SCSIPortPage2_t *pPP2 = (SCSIPortPage2_t *) pbuf; 5528 MpiDeviceInfo_t *pdevice = NULL; 5529 5530 /* 5531 * Save "Set to Avoid SCSI Bus Resets" flag 5532 */ 5533 ioc->spi_data.bus_reset = 5534 (le32_to_cpu(pPP2->PortFlags) & 5535 MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET) ? 5536 0 : 1 ; 5537 5538 /* Save the Port Page 2 data 5539 * (reformat into a 32bit quantity) 5540 */ 5541 data = le32_to_cpu(pPP2->PortFlags) & MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK; 5542 ioc->spi_data.PortFlags = data; 5543 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) { 5544 pdevice = &pPP2->DeviceSettings[ii]; 5545 data = (le16_to_cpu(pdevice->DeviceFlags) << 16) | 5546 (pdevice->SyncFactor << 8) | pdevice->Timeout; 5547 ioc->spi_data.nvram[ii] = data; 5548 } 5549 } 5550 5551 pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma); 5552 } 5553 } 5554 5555 /* Update Adapter limits with those from NVRAM 5556 * Comment: Don't need to do this. Target performance 5557 * parameters will never exceed the adapters limits. 5558 */ 5559 5560 return rc; 5561 } 5562 5563 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 5564 /** 5565 * mpt_readScsiDevicePageHeaders - save version and length of SDP1 5566 * @ioc: Pointer to a Adapter Strucutre 5567 * @portnum: IOC port number 5568 * 5569 * Return: -EFAULT if read of config page header fails 5570 * or 0 if success. 5571 */ 5572 static int 5573 mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum) 5574 { 5575 CONFIGPARMS cfg; 5576 ConfigPageHeader_t header; 5577 5578 /* Read the SCSI Device Page 1 header 5579 */ 5580 header.PageVersion = 0; 5581 header.PageLength = 0; 5582 header.PageNumber = 1; 5583 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; 5584 cfg.cfghdr.hdr = &header; 5585 cfg.physAddr = -1; 5586 cfg.pageAddr = portnum; 5587 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5588 cfg.dir = 0; 5589 cfg.timeout = 0; 5590 if (mpt_config(ioc, &cfg) != 0) 5591 return -EFAULT; 5592 5593 ioc->spi_data.sdp1version = cfg.cfghdr.hdr->PageVersion; 5594 ioc->spi_data.sdp1length = cfg.cfghdr.hdr->PageLength; 5595 5596 header.PageVersion = 0; 5597 header.PageLength = 0; 5598 header.PageNumber = 0; 5599 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; 5600 if (mpt_config(ioc, &cfg) != 0) 5601 return -EFAULT; 5602 5603 ioc->spi_data.sdp0version = cfg.cfghdr.hdr->PageVersion; 5604 ioc->spi_data.sdp0length = cfg.cfghdr.hdr->PageLength; 5605 5606 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 0: version %d length %d\n", 5607 ioc->name, ioc->spi_data.sdp0version, ioc->spi_data.sdp0length)); 5608 5609 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 1: version %d length %d\n", 5610 ioc->name, ioc->spi_data.sdp1version, ioc->spi_data.sdp1length)); 5611 return 0; 5612 } 5613 5614 /** 5615 * mpt_inactive_raid_list_free - This clears this link list. 5616 * @ioc : pointer to per adapter structure 5617 **/ 5618 static void 5619 mpt_inactive_raid_list_free(MPT_ADAPTER *ioc) 5620 { 5621 struct inactive_raid_component_info *component_info, *pNext; 5622 5623 if (list_empty(&ioc->raid_data.inactive_list)) 5624 return; 5625 5626 mutex_lock(&ioc->raid_data.inactive_list_mutex); 5627 list_for_each_entry_safe(component_info, pNext, 5628 &ioc->raid_data.inactive_list, list) { 5629 list_del(&component_info->list); 5630 kfree(component_info); 5631 } 5632 mutex_unlock(&ioc->raid_data.inactive_list_mutex); 5633 } 5634 5635 /** 5636 * mpt_inactive_raid_volumes - sets up link list of phy_disk_nums for devices belonging in an inactive volume 5637 * 5638 * @ioc : pointer to per adapter structure 5639 * @channel : volume channel 5640 * @id : volume target id 5641 **/ 5642 static void 5643 mpt_inactive_raid_volumes(MPT_ADAPTER *ioc, u8 channel, u8 id) 5644 { 5645 CONFIGPARMS cfg; 5646 ConfigPageHeader_t hdr; 5647 dma_addr_t dma_handle; 5648 pRaidVolumePage0_t buffer = NULL; 5649 int i; 5650 RaidPhysDiskPage0_t phys_disk; 5651 struct inactive_raid_component_info *component_info; 5652 int handle_inactive_volumes; 5653 5654 memset(&cfg, 0 , sizeof(CONFIGPARMS)); 5655 memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); 5656 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME; 5657 cfg.pageAddr = (channel << 8) + id; 5658 cfg.cfghdr.hdr = &hdr; 5659 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5660 5661 if (mpt_config(ioc, &cfg) != 0) 5662 goto out; 5663 5664 if (!hdr.PageLength) 5665 goto out; 5666 5667 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, 5668 &dma_handle); 5669 5670 if (!buffer) 5671 goto out; 5672 5673 cfg.physAddr = dma_handle; 5674 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5675 5676 if (mpt_config(ioc, &cfg) != 0) 5677 goto out; 5678 5679 if (!buffer->NumPhysDisks) 5680 goto out; 5681 5682 handle_inactive_volumes = 5683 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE || 5684 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED) == 0 || 5685 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_FAILED || 5686 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_MISSING) ? 1 : 0; 5687 5688 if (!handle_inactive_volumes) 5689 goto out; 5690 5691 mutex_lock(&ioc->raid_data.inactive_list_mutex); 5692 for (i = 0; i < buffer->NumPhysDisks; i++) { 5693 if(mpt_raid_phys_disk_pg0(ioc, 5694 buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0) 5695 continue; 5696 5697 if ((component_info = kmalloc(sizeof (*component_info), 5698 GFP_KERNEL)) == NULL) 5699 continue; 5700 5701 component_info->volumeID = id; 5702 component_info->volumeBus = channel; 5703 component_info->d.PhysDiskNum = phys_disk.PhysDiskNum; 5704 component_info->d.PhysDiskBus = phys_disk.PhysDiskBus; 5705 component_info->d.PhysDiskID = phys_disk.PhysDiskID; 5706 component_info->d.PhysDiskIOC = phys_disk.PhysDiskIOC; 5707 5708 list_add_tail(&component_info->list, 5709 &ioc->raid_data.inactive_list); 5710 } 5711 mutex_unlock(&ioc->raid_data.inactive_list_mutex); 5712 5713 out: 5714 if (buffer) 5715 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer, 5716 dma_handle); 5717 } 5718 5719 /** 5720 * mpt_raid_phys_disk_pg0 - returns phys disk page zero 5721 * @ioc: Pointer to a Adapter Structure 5722 * @phys_disk_num: io unit unique phys disk num generated by the ioc 5723 * @phys_disk: requested payload data returned 5724 * 5725 * Return: 5726 * 0 on success 5727 * -EFAULT if read of config page header fails or data pointer not NULL 5728 * -ENOMEM if pci_alloc failed 5729 **/ 5730 int 5731 mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num, 5732 RaidPhysDiskPage0_t *phys_disk) 5733 { 5734 CONFIGPARMS cfg; 5735 ConfigPageHeader_t hdr; 5736 dma_addr_t dma_handle; 5737 pRaidPhysDiskPage0_t buffer = NULL; 5738 int rc; 5739 5740 memset(&cfg, 0 , sizeof(CONFIGPARMS)); 5741 memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); 5742 memset(phys_disk, 0, sizeof(RaidPhysDiskPage0_t)); 5743 5744 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE0_PAGEVERSION; 5745 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK; 5746 cfg.cfghdr.hdr = &hdr; 5747 cfg.physAddr = -1; 5748 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5749 5750 if (mpt_config(ioc, &cfg) != 0) { 5751 rc = -EFAULT; 5752 goto out; 5753 } 5754 5755 if (!hdr.PageLength) { 5756 rc = -EFAULT; 5757 goto out; 5758 } 5759 5760 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, 5761 &dma_handle); 5762 5763 if (!buffer) { 5764 rc = -ENOMEM; 5765 goto out; 5766 } 5767 5768 cfg.physAddr = dma_handle; 5769 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5770 cfg.pageAddr = phys_disk_num; 5771 5772 if (mpt_config(ioc, &cfg) != 0) { 5773 rc = -EFAULT; 5774 goto out; 5775 } 5776 5777 rc = 0; 5778 memcpy(phys_disk, buffer, sizeof(*buffer)); 5779 phys_disk->MaxLBA = le32_to_cpu(buffer->MaxLBA); 5780 5781 out: 5782 5783 if (buffer) 5784 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer, 5785 dma_handle); 5786 5787 return rc; 5788 } 5789 5790 /** 5791 * mpt_raid_phys_disk_get_num_paths - returns number paths associated to this phys_num 5792 * @ioc: Pointer to a Adapter Structure 5793 * @phys_disk_num: io unit unique phys disk num generated by the ioc 5794 * 5795 * Return: 5796 * returns number paths 5797 **/ 5798 int 5799 mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER *ioc, u8 phys_disk_num) 5800 { 5801 CONFIGPARMS cfg; 5802 ConfigPageHeader_t hdr; 5803 dma_addr_t dma_handle; 5804 pRaidPhysDiskPage1_t buffer = NULL; 5805 int rc; 5806 5807 memset(&cfg, 0 , sizeof(CONFIGPARMS)); 5808 memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); 5809 5810 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION; 5811 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK; 5812 hdr.PageNumber = 1; 5813 cfg.cfghdr.hdr = &hdr; 5814 cfg.physAddr = -1; 5815 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5816 5817 if (mpt_config(ioc, &cfg) != 0) { 5818 rc = 0; 5819 goto out; 5820 } 5821 5822 if (!hdr.PageLength) { 5823 rc = 0; 5824 goto out; 5825 } 5826 5827 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, 5828 &dma_handle); 5829 5830 if (!buffer) { 5831 rc = 0; 5832 goto out; 5833 } 5834 5835 cfg.physAddr = dma_handle; 5836 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5837 cfg.pageAddr = phys_disk_num; 5838 5839 if (mpt_config(ioc, &cfg) != 0) { 5840 rc = 0; 5841 goto out; 5842 } 5843 5844 rc = buffer->NumPhysDiskPaths; 5845 out: 5846 5847 if (buffer) 5848 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer, 5849 dma_handle); 5850 5851 return rc; 5852 } 5853 EXPORT_SYMBOL(mpt_raid_phys_disk_get_num_paths); 5854 5855 /** 5856 * mpt_raid_phys_disk_pg1 - returns phys disk page 1 5857 * @ioc: Pointer to a Adapter Structure 5858 * @phys_disk_num: io unit unique phys disk num generated by the ioc 5859 * @phys_disk: requested payload data returned 5860 * 5861 * Return: 5862 * 0 on success 5863 * -EFAULT if read of config page header fails or data pointer not NULL 5864 * -ENOMEM if pci_alloc failed 5865 **/ 5866 int 5867 mpt_raid_phys_disk_pg1(MPT_ADAPTER *ioc, u8 phys_disk_num, 5868 RaidPhysDiskPage1_t *phys_disk) 5869 { 5870 CONFIGPARMS cfg; 5871 ConfigPageHeader_t hdr; 5872 dma_addr_t dma_handle; 5873 pRaidPhysDiskPage1_t buffer = NULL; 5874 int rc; 5875 int i; 5876 __le64 sas_address; 5877 5878 memset(&cfg, 0 , sizeof(CONFIGPARMS)); 5879 memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); 5880 rc = 0; 5881 5882 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION; 5883 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK; 5884 hdr.PageNumber = 1; 5885 cfg.cfghdr.hdr = &hdr; 5886 cfg.physAddr = -1; 5887 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5888 5889 if (mpt_config(ioc, &cfg) != 0) { 5890 rc = -EFAULT; 5891 goto out; 5892 } 5893 5894 if (!hdr.PageLength) { 5895 rc = -EFAULT; 5896 goto out; 5897 } 5898 5899 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, 5900 &dma_handle); 5901 5902 if (!buffer) { 5903 rc = -ENOMEM; 5904 goto out; 5905 } 5906 5907 cfg.physAddr = dma_handle; 5908 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5909 cfg.pageAddr = phys_disk_num; 5910 5911 if (mpt_config(ioc, &cfg) != 0) { 5912 rc = -EFAULT; 5913 goto out; 5914 } 5915 5916 phys_disk->NumPhysDiskPaths = buffer->NumPhysDiskPaths; 5917 phys_disk->PhysDiskNum = phys_disk_num; 5918 for (i = 0; i < phys_disk->NumPhysDiskPaths; i++) { 5919 phys_disk->Path[i].PhysDiskID = buffer->Path[i].PhysDiskID; 5920 phys_disk->Path[i].PhysDiskBus = buffer->Path[i].PhysDiskBus; 5921 phys_disk->Path[i].OwnerIdentifier = 5922 buffer->Path[i].OwnerIdentifier; 5923 phys_disk->Path[i].Flags = le16_to_cpu(buffer->Path[i].Flags); 5924 memcpy(&sas_address, &buffer->Path[i].WWID, sizeof(__le64)); 5925 sas_address = le64_to_cpu(sas_address); 5926 memcpy(&phys_disk->Path[i].WWID, &sas_address, sizeof(__le64)); 5927 memcpy(&sas_address, 5928 &buffer->Path[i].OwnerWWID, sizeof(__le64)); 5929 sas_address = le64_to_cpu(sas_address); 5930 memcpy(&phys_disk->Path[i].OwnerWWID, 5931 &sas_address, sizeof(__le64)); 5932 } 5933 5934 out: 5935 5936 if (buffer) 5937 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer, 5938 dma_handle); 5939 5940 return rc; 5941 } 5942 EXPORT_SYMBOL(mpt_raid_phys_disk_pg1); 5943 5944 5945 /** 5946 * mpt_findImVolumes - Identify IDs of hidden disks and RAID Volumes 5947 * @ioc: Pointer to a Adapter Strucutre 5948 * 5949 * Return: 5950 * 0 on success 5951 * -EFAULT if read of config page header fails or data pointer not NULL 5952 * -ENOMEM if pci_alloc failed 5953 **/ 5954 int 5955 mpt_findImVolumes(MPT_ADAPTER *ioc) 5956 { 5957 IOCPage2_t *pIoc2; 5958 u8 *mem; 5959 dma_addr_t ioc2_dma; 5960 CONFIGPARMS cfg; 5961 ConfigPageHeader_t header; 5962 int rc = 0; 5963 int iocpage2sz; 5964 int i; 5965 5966 if (!ioc->ir_firmware) 5967 return 0; 5968 5969 /* Free the old page 5970 */ 5971 kfree(ioc->raid_data.pIocPg2); 5972 ioc->raid_data.pIocPg2 = NULL; 5973 mpt_inactive_raid_list_free(ioc); 5974 5975 /* Read IOCP2 header then the page. 5976 */ 5977 header.PageVersion = 0; 5978 header.PageLength = 0; 5979 header.PageNumber = 2; 5980 header.PageType = MPI_CONFIG_PAGETYPE_IOC; 5981 cfg.cfghdr.hdr = &header; 5982 cfg.physAddr = -1; 5983 cfg.pageAddr = 0; 5984 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5985 cfg.dir = 0; 5986 cfg.timeout = 0; 5987 if (mpt_config(ioc, &cfg) != 0) 5988 return -EFAULT; 5989 5990 if (header.PageLength == 0) 5991 return -EFAULT; 5992 5993 iocpage2sz = header.PageLength * 4; 5994 pIoc2 = pci_alloc_consistent(ioc->pcidev, iocpage2sz, &ioc2_dma); 5995 if (!pIoc2) 5996 return -ENOMEM; 5997 5998 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5999 cfg.physAddr = ioc2_dma; 6000 if (mpt_config(ioc, &cfg) != 0) 6001 goto out; 6002 6003 mem = kmalloc(iocpage2sz, GFP_KERNEL); 6004 if (!mem) { 6005 rc = -ENOMEM; 6006 goto out; 6007 } 6008 6009 memcpy(mem, (u8 *)pIoc2, iocpage2sz); 6010 ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem; 6011 6012 mpt_read_ioc_pg_3(ioc); 6013 6014 for (i = 0; i < pIoc2->NumActiveVolumes ; i++) 6015 mpt_inactive_raid_volumes(ioc, 6016 pIoc2->RaidVolume[i].VolumeBus, 6017 pIoc2->RaidVolume[i].VolumeID); 6018 6019 out: 6020 pci_free_consistent(ioc->pcidev, iocpage2sz, pIoc2, ioc2_dma); 6021 6022 return rc; 6023 } 6024 6025 static int 6026 mpt_read_ioc_pg_3(MPT_ADAPTER *ioc) 6027 { 6028 IOCPage3_t *pIoc3; 6029 u8 *mem; 6030 CONFIGPARMS cfg; 6031 ConfigPageHeader_t header; 6032 dma_addr_t ioc3_dma; 6033 int iocpage3sz = 0; 6034 6035 /* Free the old page 6036 */ 6037 kfree(ioc->raid_data.pIocPg3); 6038 ioc->raid_data.pIocPg3 = NULL; 6039 6040 /* There is at least one physical disk. 6041 * Read and save IOC Page 3 6042 */ 6043 header.PageVersion = 0; 6044 header.PageLength = 0; 6045 header.PageNumber = 3; 6046 header.PageType = MPI_CONFIG_PAGETYPE_IOC; 6047 cfg.cfghdr.hdr = &header; 6048 cfg.physAddr = -1; 6049 cfg.pageAddr = 0; 6050 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 6051 cfg.dir = 0; 6052 cfg.timeout = 0; 6053 if (mpt_config(ioc, &cfg) != 0) 6054 return 0; 6055 6056 if (header.PageLength == 0) 6057 return 0; 6058 6059 /* Read Header good, alloc memory 6060 */ 6061 iocpage3sz = header.PageLength * 4; 6062 pIoc3 = pci_alloc_consistent(ioc->pcidev, iocpage3sz, &ioc3_dma); 6063 if (!pIoc3) 6064 return 0; 6065 6066 /* Read the Page and save the data 6067 * into malloc'd memory. 6068 */ 6069 cfg.physAddr = ioc3_dma; 6070 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 6071 if (mpt_config(ioc, &cfg) == 0) { 6072 mem = kmalloc(iocpage3sz, GFP_KERNEL); 6073 if (mem) { 6074 memcpy(mem, (u8 *)pIoc3, iocpage3sz); 6075 ioc->raid_data.pIocPg3 = (IOCPage3_t *) mem; 6076 } 6077 } 6078 6079 pci_free_consistent(ioc->pcidev, iocpage3sz, pIoc3, ioc3_dma); 6080 6081 return 0; 6082 } 6083 6084 static void 6085 mpt_read_ioc_pg_4(MPT_ADAPTER *ioc) 6086 { 6087 IOCPage4_t *pIoc4; 6088 CONFIGPARMS cfg; 6089 ConfigPageHeader_t header; 6090 dma_addr_t ioc4_dma; 6091 int iocpage4sz; 6092 6093 /* Read and save IOC Page 4 6094 */ 6095 header.PageVersion = 0; 6096 header.PageLength = 0; 6097 header.PageNumber = 4; 6098 header.PageType = MPI_CONFIG_PAGETYPE_IOC; 6099 cfg.cfghdr.hdr = &header; 6100 cfg.physAddr = -1; 6101 cfg.pageAddr = 0; 6102 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 6103 cfg.dir = 0; 6104 cfg.timeout = 0; 6105 if (mpt_config(ioc, &cfg) != 0) 6106 return; 6107 6108 if (header.PageLength == 0) 6109 return; 6110 6111 if ( (pIoc4 = ioc->spi_data.pIocPg4) == NULL ) { 6112 iocpage4sz = (header.PageLength + 4) * 4; /* Allow 4 additional SEP's */ 6113 pIoc4 = pci_alloc_consistent(ioc->pcidev, iocpage4sz, &ioc4_dma); 6114 if (!pIoc4) 6115 return; 6116 ioc->alloc_total += iocpage4sz; 6117 } else { 6118 ioc4_dma = ioc->spi_data.IocPg4_dma; 6119 iocpage4sz = ioc->spi_data.IocPg4Sz; 6120 } 6121 6122 /* Read the Page into dma memory. 6123 */ 6124 cfg.physAddr = ioc4_dma; 6125 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 6126 if (mpt_config(ioc, &cfg) == 0) { 6127 ioc->spi_data.pIocPg4 = (IOCPage4_t *) pIoc4; 6128 ioc->spi_data.IocPg4_dma = ioc4_dma; 6129 ioc->spi_data.IocPg4Sz = iocpage4sz; 6130 } else { 6131 pci_free_consistent(ioc->pcidev, iocpage4sz, pIoc4, ioc4_dma); 6132 ioc->spi_data.pIocPg4 = NULL; 6133 ioc->alloc_total -= iocpage4sz; 6134 } 6135 } 6136 6137 static void 6138 mpt_read_ioc_pg_1(MPT_ADAPTER *ioc) 6139 { 6140 IOCPage1_t *pIoc1; 6141 CONFIGPARMS cfg; 6142 ConfigPageHeader_t header; 6143 dma_addr_t ioc1_dma; 6144 int iocpage1sz = 0; 6145 u32 tmp; 6146 6147 /* Check the Coalescing Timeout in IOC Page 1 6148 */ 6149 header.PageVersion = 0; 6150 header.PageLength = 0; 6151 header.PageNumber = 1; 6152 header.PageType = MPI_CONFIG_PAGETYPE_IOC; 6153 cfg.cfghdr.hdr = &header; 6154 cfg.physAddr = -1; 6155 cfg.pageAddr = 0; 6156 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 6157 cfg.dir = 0; 6158 cfg.timeout = 0; 6159 if (mpt_config(ioc, &cfg) != 0) 6160 return; 6161 6162 if (header.PageLength == 0) 6163 return; 6164 6165 /* Read Header good, alloc memory 6166 */ 6167 iocpage1sz = header.PageLength * 4; 6168 pIoc1 = pci_alloc_consistent(ioc->pcidev, iocpage1sz, &ioc1_dma); 6169 if (!pIoc1) 6170 return; 6171 6172 /* Read the Page and check coalescing timeout 6173 */ 6174 cfg.physAddr = ioc1_dma; 6175 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 6176 if (mpt_config(ioc, &cfg) == 0) { 6177 6178 tmp = le32_to_cpu(pIoc1->Flags) & MPI_IOCPAGE1_REPLY_COALESCING; 6179 if (tmp == MPI_IOCPAGE1_REPLY_COALESCING) { 6180 tmp = le32_to_cpu(pIoc1->CoalescingTimeout); 6181 6182 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Coalescing Enabled Timeout = %d\n", 6183 ioc->name, tmp)); 6184 6185 if (tmp > MPT_COALESCING_TIMEOUT) { 6186 pIoc1->CoalescingTimeout = cpu_to_le32(MPT_COALESCING_TIMEOUT); 6187 6188 /* Write NVRAM and current 6189 */ 6190 cfg.dir = 1; 6191 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT; 6192 if (mpt_config(ioc, &cfg) == 0) { 6193 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Reset Current Coalescing Timeout to = %d\n", 6194 ioc->name, MPT_COALESCING_TIMEOUT)); 6195 6196 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM; 6197 if (mpt_config(ioc, &cfg) == 0) { 6198 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6199 "Reset NVRAM Coalescing Timeout to = %d\n", 6200 ioc->name, MPT_COALESCING_TIMEOUT)); 6201 } else { 6202 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6203 "Reset NVRAM Coalescing Timeout Failed\n", 6204 ioc->name)); 6205 } 6206 6207 } else { 6208 dprintk(ioc, printk(MYIOC_s_WARN_FMT 6209 "Reset of Current Coalescing Timeout Failed!\n", 6210 ioc->name)); 6211 } 6212 } 6213 6214 } else { 6215 dprintk(ioc, printk(MYIOC_s_WARN_FMT "Coalescing Disabled\n", ioc->name)); 6216 } 6217 } 6218 6219 pci_free_consistent(ioc->pcidev, iocpage1sz, pIoc1, ioc1_dma); 6220 6221 return; 6222 } 6223 6224 static void 6225 mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc) 6226 { 6227 CONFIGPARMS cfg; 6228 ConfigPageHeader_t hdr; 6229 dma_addr_t buf_dma; 6230 ManufacturingPage0_t *pbuf = NULL; 6231 6232 memset(&cfg, 0 , sizeof(CONFIGPARMS)); 6233 memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); 6234 6235 hdr.PageType = MPI_CONFIG_PAGETYPE_MANUFACTURING; 6236 cfg.cfghdr.hdr = &hdr; 6237 cfg.physAddr = -1; 6238 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 6239 cfg.timeout = 10; 6240 6241 if (mpt_config(ioc, &cfg) != 0) 6242 goto out; 6243 6244 if (!cfg.cfghdr.hdr->PageLength) 6245 goto out; 6246 6247 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 6248 pbuf = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, &buf_dma); 6249 if (!pbuf) 6250 goto out; 6251 6252 cfg.physAddr = buf_dma; 6253 6254 if (mpt_config(ioc, &cfg) != 0) 6255 goto out; 6256 6257 memcpy(ioc->board_name, pbuf->BoardName, sizeof(ioc->board_name)); 6258 memcpy(ioc->board_assembly, pbuf->BoardAssembly, sizeof(ioc->board_assembly)); 6259 memcpy(ioc->board_tracer, pbuf->BoardTracerNumber, sizeof(ioc->board_tracer)); 6260 6261 out: 6262 6263 if (pbuf) 6264 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, pbuf, buf_dma); 6265 } 6266 6267 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6268 /** 6269 * SendEventNotification - Send EventNotification (on or off) request to adapter 6270 * @ioc: Pointer to MPT_ADAPTER structure 6271 * @EvSwitch: Event switch flags 6272 * @sleepFlag: Specifies whether the process can sleep 6273 */ 6274 static int 6275 SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch, int sleepFlag) 6276 { 6277 EventNotification_t evn; 6278 MPIDefaultReply_t reply_buf; 6279 6280 memset(&evn, 0, sizeof(EventNotification_t)); 6281 memset(&reply_buf, 0, sizeof(MPIDefaultReply_t)); 6282 6283 evn.Function = MPI_FUNCTION_EVENT_NOTIFICATION; 6284 evn.Switch = EvSwitch; 6285 evn.MsgContext = cpu_to_le32(mpt_base_index << 16); 6286 6287 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6288 "Sending EventNotification (%d) request %p\n", 6289 ioc->name, EvSwitch, &evn)); 6290 6291 return mpt_handshake_req_reply_wait(ioc, sizeof(EventNotification_t), 6292 (u32 *)&evn, sizeof(MPIDefaultReply_t), (u16 *)&reply_buf, 30, 6293 sleepFlag); 6294 } 6295 6296 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6297 /** 6298 * SendEventAck - Send EventAck request to MPT adapter. 6299 * @ioc: Pointer to MPT_ADAPTER structure 6300 * @evnp: Pointer to original EventNotification request 6301 */ 6302 static int 6303 SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp) 6304 { 6305 EventAck_t *pAck; 6306 6307 if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) { 6308 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n", 6309 ioc->name, __func__)); 6310 return -1; 6311 } 6312 6313 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending EventAck\n", ioc->name)); 6314 6315 pAck->Function = MPI_FUNCTION_EVENT_ACK; 6316 pAck->ChainOffset = 0; 6317 pAck->Reserved[0] = pAck->Reserved[1] = 0; 6318 pAck->MsgFlags = 0; 6319 pAck->Reserved1[0] = pAck->Reserved1[1] = pAck->Reserved1[2] = 0; 6320 pAck->Event = evnp->Event; 6321 pAck->EventContext = evnp->EventContext; 6322 6323 mpt_put_msg_frame(mpt_base_index, ioc, (MPT_FRAME_HDR *)pAck); 6324 6325 return 0; 6326 } 6327 6328 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6329 /** 6330 * mpt_config - Generic function to issue config message 6331 * @ioc: Pointer to an adapter structure 6332 * @pCfg: Pointer to a configuration structure. Struct contains 6333 * action, page address, direction, physical address 6334 * and pointer to a configuration page header 6335 * Page header is updated. 6336 * 6337 * Returns 0 for success 6338 * -EPERM if not allowed due to ISR context 6339 * -EAGAIN if no msg frames currently available 6340 * -EFAULT for non-successful reply or no reply (timeout) 6341 */ 6342 int 6343 mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg) 6344 { 6345 Config_t *pReq; 6346 ConfigReply_t *pReply; 6347 ConfigExtendedPageHeader_t *pExtHdr = NULL; 6348 MPT_FRAME_HDR *mf; 6349 int ii; 6350 int flagsLength; 6351 long timeout; 6352 int ret; 6353 u8 page_type = 0, extend_page; 6354 unsigned long timeleft; 6355 unsigned long flags; 6356 int in_isr; 6357 u8 issue_hard_reset = 0; 6358 u8 retry_count = 0; 6359 6360 /* Prevent calling wait_event() (below), if caller happens 6361 * to be in ISR context, because that is fatal! 6362 */ 6363 in_isr = in_interrupt(); 6364 if (in_isr) { 6365 dcprintk(ioc, printk(MYIOC_s_WARN_FMT "Config request not allowed in ISR context!\n", 6366 ioc->name)); 6367 return -EPERM; 6368 } 6369 6370 /* don't send a config page during diag reset */ 6371 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 6372 if (ioc->ioc_reset_in_progress) { 6373 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6374 "%s: busy with host reset\n", ioc->name, __func__)); 6375 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 6376 return -EBUSY; 6377 } 6378 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 6379 6380 /* don't send if no chance of success */ 6381 if (!ioc->active || 6382 mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_OPERATIONAL) { 6383 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6384 "%s: ioc not operational, %d, %xh\n", 6385 ioc->name, __func__, ioc->active, 6386 mpt_GetIocState(ioc, 0))); 6387 return -EFAULT; 6388 } 6389 6390 retry_config: 6391 mutex_lock(&ioc->mptbase_cmds.mutex); 6392 /* init the internal cmd struct */ 6393 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE); 6394 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status) 6395 6396 /* Get and Populate a free Frame 6397 */ 6398 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) { 6399 dcprintk(ioc, printk(MYIOC_s_WARN_FMT 6400 "mpt_config: no msg frames!\n", ioc->name)); 6401 ret = -EAGAIN; 6402 goto out; 6403 } 6404 6405 pReq = (Config_t *)mf; 6406 pReq->Action = pCfg->action; 6407 pReq->Reserved = 0; 6408 pReq->ChainOffset = 0; 6409 pReq->Function = MPI_FUNCTION_CONFIG; 6410 6411 /* Assume page type is not extended and clear "reserved" fields. */ 6412 pReq->ExtPageLength = 0; 6413 pReq->ExtPageType = 0; 6414 pReq->MsgFlags = 0; 6415 6416 for (ii=0; ii < 8; ii++) 6417 pReq->Reserved2[ii] = 0; 6418 6419 pReq->Header.PageVersion = pCfg->cfghdr.hdr->PageVersion; 6420 pReq->Header.PageLength = pCfg->cfghdr.hdr->PageLength; 6421 pReq->Header.PageNumber = pCfg->cfghdr.hdr->PageNumber; 6422 pReq->Header.PageType = (pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK); 6423 6424 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == MPI_CONFIG_PAGETYPE_EXTENDED) { 6425 pExtHdr = (ConfigExtendedPageHeader_t *)pCfg->cfghdr.ehdr; 6426 pReq->ExtPageLength = cpu_to_le16(pExtHdr->ExtPageLength); 6427 pReq->ExtPageType = pExtHdr->ExtPageType; 6428 pReq->Header.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; 6429 6430 /* Page Length must be treated as a reserved field for the 6431 * extended header. 6432 */ 6433 pReq->Header.PageLength = 0; 6434 } 6435 6436 pReq->PageAddress = cpu_to_le32(pCfg->pageAddr); 6437 6438 /* Add a SGE to the config request. 6439 */ 6440 if (pCfg->dir) 6441 flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE; 6442 else 6443 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ; 6444 6445 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == 6446 MPI_CONFIG_PAGETYPE_EXTENDED) { 6447 flagsLength |= pExtHdr->ExtPageLength * 4; 6448 page_type = pReq->ExtPageType; 6449 extend_page = 1; 6450 } else { 6451 flagsLength |= pCfg->cfghdr.hdr->PageLength * 4; 6452 page_type = pReq->Header.PageType; 6453 extend_page = 0; 6454 } 6455 6456 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6457 "Sending Config request type 0x%x, page 0x%x and action %d\n", 6458 ioc->name, page_type, pReq->Header.PageNumber, pReq->Action)); 6459 6460 ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr); 6461 timeout = (pCfg->timeout < 15) ? HZ*15 : HZ*pCfg->timeout; 6462 mpt_put_msg_frame(mpt_base_index, ioc, mf); 6463 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done, 6464 timeout); 6465 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { 6466 ret = -ETIME; 6467 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6468 "Failed Sending Config request type 0x%x, page 0x%x," 6469 " action %d, status %xh, time left %ld\n\n", 6470 ioc->name, page_type, pReq->Header.PageNumber, 6471 pReq->Action, ioc->mptbase_cmds.status, timeleft)); 6472 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) 6473 goto out; 6474 if (!timeleft) { 6475 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 6476 if (ioc->ioc_reset_in_progress) { 6477 spin_unlock_irqrestore(&ioc->taskmgmt_lock, 6478 flags); 6479 printk(MYIOC_s_INFO_FMT "%s: host reset in" 6480 " progress mpt_config timed out.!!\n", 6481 __func__, ioc->name); 6482 mutex_unlock(&ioc->mptbase_cmds.mutex); 6483 return -EFAULT; 6484 } 6485 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 6486 issue_hard_reset = 1; 6487 } 6488 goto out; 6489 } 6490 6491 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) { 6492 ret = -1; 6493 goto out; 6494 } 6495 pReply = (ConfigReply_t *)ioc->mptbase_cmds.reply; 6496 ret = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK; 6497 if (ret == MPI_IOCSTATUS_SUCCESS) { 6498 if (extend_page) { 6499 pCfg->cfghdr.ehdr->ExtPageLength = 6500 le16_to_cpu(pReply->ExtPageLength); 6501 pCfg->cfghdr.ehdr->ExtPageType = 6502 pReply->ExtPageType; 6503 } 6504 pCfg->cfghdr.hdr->PageVersion = pReply->Header.PageVersion; 6505 pCfg->cfghdr.hdr->PageLength = pReply->Header.PageLength; 6506 pCfg->cfghdr.hdr->PageNumber = pReply->Header.PageNumber; 6507 pCfg->cfghdr.hdr->PageType = pReply->Header.PageType; 6508 6509 } 6510 6511 if (retry_count) 6512 printk(MYIOC_s_INFO_FMT "Retry completed " 6513 "ret=0x%x timeleft=%ld\n", 6514 ioc->name, ret, timeleft); 6515 6516 dcprintk(ioc, printk(KERN_DEBUG "IOCStatus=%04xh, IOCLogInfo=%08xh\n", 6517 ret, le32_to_cpu(pReply->IOCLogInfo))); 6518 6519 out: 6520 6521 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status) 6522 mutex_unlock(&ioc->mptbase_cmds.mutex); 6523 if (issue_hard_reset) { 6524 issue_hard_reset = 0; 6525 printk(MYIOC_s_WARN_FMT 6526 "Issuing Reset from %s!!, doorbell=0x%08x\n", 6527 ioc->name, __func__, mpt_GetIocState(ioc, 0)); 6528 if (retry_count == 0) { 6529 if (mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP) != 0) 6530 retry_count++; 6531 } else 6532 mpt_HardResetHandler(ioc, CAN_SLEEP); 6533 6534 mpt_free_msg_frame(ioc, mf); 6535 /* attempt one retry for a timed out command */ 6536 if (retry_count < 2) { 6537 printk(MYIOC_s_INFO_FMT 6538 "Attempting Retry Config request" 6539 " type 0x%x, page 0x%x," 6540 " action %d\n", ioc->name, page_type, 6541 pCfg->cfghdr.hdr->PageNumber, pCfg->action); 6542 retry_count++; 6543 goto retry_config; 6544 } 6545 } 6546 return ret; 6547 6548 } 6549 6550 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6551 /** 6552 * mpt_ioc_reset - Base cleanup for hard reset 6553 * @ioc: Pointer to the adapter structure 6554 * @reset_phase: Indicates pre- or post-reset functionality 6555 * 6556 * Remark: Frees resources with internally generated commands. 6557 */ 6558 static int 6559 mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) 6560 { 6561 switch (reset_phase) { 6562 case MPT_IOC_SETUP_RESET: 6563 ioc->taskmgmt_quiesce_io = 1; 6564 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6565 "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__)); 6566 break; 6567 case MPT_IOC_PRE_RESET: 6568 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6569 "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__)); 6570 break; 6571 case MPT_IOC_POST_RESET: 6572 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6573 "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__)); 6574 /* wake up mptbase_cmds */ 6575 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) { 6576 ioc->mptbase_cmds.status |= 6577 MPT_MGMT_STATUS_DID_IOCRESET; 6578 complete(&ioc->mptbase_cmds.done); 6579 } 6580 /* wake up taskmgmt_cmds */ 6581 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) { 6582 ioc->taskmgmt_cmds.status |= 6583 MPT_MGMT_STATUS_DID_IOCRESET; 6584 complete(&ioc->taskmgmt_cmds.done); 6585 } 6586 break; 6587 default: 6588 break; 6589 } 6590 6591 return 1; /* currently means nothing really */ 6592 } 6593 6594 6595 #ifdef CONFIG_PROC_FS /* { */ 6596 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6597 /* 6598 * procfs (%MPT_PROCFS_MPTBASEDIR/...) support stuff... 6599 */ 6600 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6601 /** 6602 * procmpt_create - Create %MPT_PROCFS_MPTBASEDIR entries. 6603 * 6604 * Returns 0 for success, non-zero for failure. 6605 */ 6606 static int 6607 procmpt_create(void) 6608 { 6609 mpt_proc_root_dir = proc_mkdir(MPT_PROCFS_MPTBASEDIR, NULL); 6610 if (mpt_proc_root_dir == NULL) 6611 return -ENOTDIR; 6612 6613 proc_create("summary", S_IRUGO, mpt_proc_root_dir, &mpt_summary_proc_fops); 6614 proc_create("version", S_IRUGO, mpt_proc_root_dir, &mpt_version_proc_fops); 6615 return 0; 6616 } 6617 6618 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6619 /** 6620 * procmpt_destroy - Tear down %MPT_PROCFS_MPTBASEDIR entries. 6621 * 6622 * Returns 0 for success, non-zero for failure. 6623 */ 6624 static void 6625 procmpt_destroy(void) 6626 { 6627 remove_proc_entry("version", mpt_proc_root_dir); 6628 remove_proc_entry("summary", mpt_proc_root_dir); 6629 remove_proc_entry(MPT_PROCFS_MPTBASEDIR, NULL); 6630 } 6631 6632 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6633 /* 6634 * Handles read request from /proc/mpt/summary or /proc/mpt/iocN/summary. 6635 */ 6636 static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan); 6637 6638 static int mpt_summary_proc_show(struct seq_file *m, void *v) 6639 { 6640 MPT_ADAPTER *ioc = m->private; 6641 6642 if (ioc) { 6643 seq_mpt_print_ioc_summary(ioc, m, 1); 6644 } else { 6645 list_for_each_entry(ioc, &ioc_list, list) { 6646 seq_mpt_print_ioc_summary(ioc, m, 1); 6647 } 6648 } 6649 6650 return 0; 6651 } 6652 6653 static int mpt_summary_proc_open(struct inode *inode, struct file *file) 6654 { 6655 return single_open(file, mpt_summary_proc_show, PDE(inode)->data); 6656 } 6657 6658 static const struct file_operations mpt_summary_proc_fops = { 6659 .owner = THIS_MODULE, 6660 .open = mpt_summary_proc_open, 6661 .read = seq_read, 6662 .llseek = seq_lseek, 6663 .release = single_release, 6664 }; 6665 6666 static int mpt_version_proc_show(struct seq_file *m, void *v) 6667 { 6668 u8 cb_idx; 6669 int scsi, fc, sas, lan, ctl, targ, dmp; 6670 char *drvname; 6671 6672 seq_printf(m, "%s-%s\n", "mptlinux", MPT_LINUX_VERSION_COMMON); 6673 seq_printf(m, " Fusion MPT base driver\n"); 6674 6675 scsi = fc = sas = lan = ctl = targ = dmp = 0; 6676 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 6677 drvname = NULL; 6678 if (MptCallbacks[cb_idx]) { 6679 switch (MptDriverClass[cb_idx]) { 6680 case MPTSPI_DRIVER: 6681 if (!scsi++) drvname = "SPI host"; 6682 break; 6683 case MPTFC_DRIVER: 6684 if (!fc++) drvname = "FC host"; 6685 break; 6686 case MPTSAS_DRIVER: 6687 if (!sas++) drvname = "SAS host"; 6688 break; 6689 case MPTLAN_DRIVER: 6690 if (!lan++) drvname = "LAN"; 6691 break; 6692 case MPTSTM_DRIVER: 6693 if (!targ++) drvname = "SCSI target"; 6694 break; 6695 case MPTCTL_DRIVER: 6696 if (!ctl++) drvname = "ioctl"; 6697 break; 6698 } 6699 6700 if (drvname) 6701 seq_printf(m, " Fusion MPT %s driver\n", drvname); 6702 } 6703 } 6704 6705 return 0; 6706 } 6707 6708 static int mpt_version_proc_open(struct inode *inode, struct file *file) 6709 { 6710 return single_open(file, mpt_version_proc_show, NULL); 6711 } 6712 6713 static const struct file_operations mpt_version_proc_fops = { 6714 .owner = THIS_MODULE, 6715 .open = mpt_version_proc_open, 6716 .read = seq_read, 6717 .llseek = seq_lseek, 6718 .release = single_release, 6719 }; 6720 6721 static int mpt_iocinfo_proc_show(struct seq_file *m, void *v) 6722 { 6723 MPT_ADAPTER *ioc = m->private; 6724 char expVer[32]; 6725 int sz; 6726 int p; 6727 6728 mpt_get_fw_exp_ver(expVer, ioc); 6729 6730 seq_printf(m, "%s:", ioc->name); 6731 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT) 6732 seq_printf(m, " (f/w download boot flag set)"); 6733 // if (ioc->facts.IOCExceptions & MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL) 6734 // seq_printf(m, " CONFIG_CHECKSUM_FAIL!"); 6735 6736 seq_printf(m, "\n ProductID = 0x%04x (%s)\n", 6737 ioc->facts.ProductID, 6738 ioc->prod_name); 6739 seq_printf(m, " FWVersion = 0x%08x%s", ioc->facts.FWVersion.Word, expVer); 6740 if (ioc->facts.FWImageSize) 6741 seq_printf(m, " (fw_size=%d)", ioc->facts.FWImageSize); 6742 seq_printf(m, "\n MsgVersion = 0x%04x\n", ioc->facts.MsgVersion); 6743 seq_printf(m, " FirstWhoInit = 0x%02x\n", ioc->FirstWhoInit); 6744 seq_printf(m, " EventState = 0x%02x\n", ioc->facts.EventState); 6745 6746 seq_printf(m, " CurrentHostMfaHighAddr = 0x%08x\n", 6747 ioc->facts.CurrentHostMfaHighAddr); 6748 seq_printf(m, " CurrentSenseBufferHighAddr = 0x%08x\n", 6749 ioc->facts.CurrentSenseBufferHighAddr); 6750 6751 seq_printf(m, " MaxChainDepth = 0x%02x frames\n", ioc->facts.MaxChainDepth); 6752 seq_printf(m, " MinBlockSize = 0x%02x bytes\n", 4*ioc->facts.BlockSize); 6753 6754 seq_printf(m, " RequestFrames @ 0x%p (Dma @ 0x%p)\n", 6755 (void *)ioc->req_frames, (void *)(ulong)ioc->req_frames_dma); 6756 /* 6757 * Rounding UP to nearest 4-kB boundary here... 6758 */ 6759 sz = (ioc->req_sz * ioc->req_depth) + 128; 6760 sz = ((sz + 0x1000UL - 1UL) / 0x1000) * 0x1000; 6761 seq_printf(m, " {CurReqSz=%d} x {CurReqDepth=%d} = %d bytes ^= 0x%x\n", 6762 ioc->req_sz, ioc->req_depth, ioc->req_sz*ioc->req_depth, sz); 6763 seq_printf(m, " {MaxReqSz=%d} {MaxReqDepth=%d}\n", 6764 4*ioc->facts.RequestFrameSize, 6765 ioc->facts.GlobalCredits); 6766 6767 seq_printf(m, " Frames @ 0x%p (Dma @ 0x%p)\n", 6768 (void *)ioc->alloc, (void *)(ulong)ioc->alloc_dma); 6769 sz = (ioc->reply_sz * ioc->reply_depth) + 128; 6770 seq_printf(m, " {CurRepSz=%d} x {CurRepDepth=%d} = %d bytes ^= 0x%x\n", 6771 ioc->reply_sz, ioc->reply_depth, ioc->reply_sz*ioc->reply_depth, sz); 6772 seq_printf(m, " {MaxRepSz=%d} {MaxRepDepth=%d}\n", 6773 ioc->facts.CurReplyFrameSize, 6774 ioc->facts.ReplyQueueDepth); 6775 6776 seq_printf(m, " MaxDevices = %d\n", 6777 (ioc->facts.MaxDevices==0) ? 255 : ioc->facts.MaxDevices); 6778 seq_printf(m, " MaxBuses = %d\n", ioc->facts.MaxBuses); 6779 6780 /* per-port info */ 6781 for (p=0; p < ioc->facts.NumberOfPorts; p++) { 6782 seq_printf(m, " PortNumber = %d (of %d)\n", 6783 p+1, 6784 ioc->facts.NumberOfPorts); 6785 if (ioc->bus_type == FC) { 6786 if (ioc->pfacts[p].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) { 6787 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow; 6788 seq_printf(m, " LanAddr = %02X:%02X:%02X:%02X:%02X:%02X\n", 6789 a[5], a[4], a[3], a[2], a[1], a[0]); 6790 } 6791 seq_printf(m, " WWN = %08X%08X:%08X%08X\n", 6792 ioc->fc_port_page0[p].WWNN.High, 6793 ioc->fc_port_page0[p].WWNN.Low, 6794 ioc->fc_port_page0[p].WWPN.High, 6795 ioc->fc_port_page0[p].WWPN.Low); 6796 } 6797 } 6798 6799 return 0; 6800 } 6801 6802 static int mpt_iocinfo_proc_open(struct inode *inode, struct file *file) 6803 { 6804 return single_open(file, mpt_iocinfo_proc_show, PDE(inode)->data); 6805 } 6806 6807 static const struct file_operations mpt_iocinfo_proc_fops = { 6808 .owner = THIS_MODULE, 6809 .open = mpt_iocinfo_proc_open, 6810 .read = seq_read, 6811 .llseek = seq_lseek, 6812 .release = single_release, 6813 }; 6814 #endif /* CONFIG_PROC_FS } */ 6815 6816 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6817 static void 6818 mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc) 6819 { 6820 buf[0] ='\0'; 6821 if ((ioc->facts.FWVersion.Word >> 24) == 0x0E) { 6822 sprintf(buf, " (Exp %02d%02d)", 6823 (ioc->facts.FWVersion.Word >> 16) & 0x00FF, /* Month */ 6824 (ioc->facts.FWVersion.Word >> 8) & 0x1F); /* Day */ 6825 6826 /* insider hack! */ 6827 if ((ioc->facts.FWVersion.Word >> 8) & 0x80) 6828 strcat(buf, " [MDBG]"); 6829 } 6830 } 6831 6832 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6833 /** 6834 * mpt_print_ioc_summary - Write ASCII summary of IOC to a buffer. 6835 * @ioc: Pointer to MPT_ADAPTER structure 6836 * @buffer: Pointer to buffer where IOC summary info should be written 6837 * @size: Pointer to number of bytes we wrote (set by this routine) 6838 * @len: Offset at which to start writing in buffer 6839 * @showlan: Display LAN stuff? 6840 * 6841 * This routine writes (english readable) ASCII text, which represents 6842 * a summary of IOC information, to a buffer. 6843 */ 6844 void 6845 mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int showlan) 6846 { 6847 char expVer[32]; 6848 int y; 6849 6850 mpt_get_fw_exp_ver(expVer, ioc); 6851 6852 /* 6853 * Shorter summary of attached ioc's... 6854 */ 6855 y = sprintf(buffer+len, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d", 6856 ioc->name, 6857 ioc->prod_name, 6858 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */ 6859 ioc->facts.FWVersion.Word, 6860 expVer, 6861 ioc->facts.NumberOfPorts, 6862 ioc->req_depth); 6863 6864 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) { 6865 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow; 6866 y += sprintf(buffer+len+y, ", LanAddr=%02X:%02X:%02X:%02X:%02X:%02X", 6867 a[5], a[4], a[3], a[2], a[1], a[0]); 6868 } 6869 6870 y += sprintf(buffer+len+y, ", IRQ=%d", ioc->pci_irq); 6871 6872 if (!ioc->active) 6873 y += sprintf(buffer+len+y, " (disabled)"); 6874 6875 y += sprintf(buffer+len+y, "\n"); 6876 6877 *size = y; 6878 } 6879 6880 static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan) 6881 { 6882 char expVer[32]; 6883 6884 mpt_get_fw_exp_ver(expVer, ioc); 6885 6886 /* 6887 * Shorter summary of attached ioc's... 6888 */ 6889 seq_printf(m, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d", 6890 ioc->name, 6891 ioc->prod_name, 6892 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */ 6893 ioc->facts.FWVersion.Word, 6894 expVer, 6895 ioc->facts.NumberOfPorts, 6896 ioc->req_depth); 6897 6898 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) { 6899 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow; 6900 seq_printf(m, ", LanAddr=%02X:%02X:%02X:%02X:%02X:%02X", 6901 a[5], a[4], a[3], a[2], a[1], a[0]); 6902 } 6903 6904 seq_printf(m, ", IRQ=%d", ioc->pci_irq); 6905 6906 if (!ioc->active) 6907 seq_printf(m, " (disabled)"); 6908 6909 seq_putc(m, '\n'); 6910 } 6911 6912 /** 6913 * mpt_set_taskmgmt_in_progress_flag - set flags associated with task management 6914 * @ioc: Pointer to MPT_ADAPTER structure 6915 * 6916 * Returns 0 for SUCCESS or -1 if FAILED. 6917 * 6918 * If -1 is return, then it was not possible to set the flags 6919 **/ 6920 int 6921 mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc) 6922 { 6923 unsigned long flags; 6924 int retval; 6925 6926 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 6927 if (ioc->ioc_reset_in_progress || ioc->taskmgmt_in_progress || 6928 (ioc->alt_ioc && ioc->alt_ioc->taskmgmt_in_progress)) { 6929 retval = -1; 6930 goto out; 6931 } 6932 retval = 0; 6933 ioc->taskmgmt_in_progress = 1; 6934 ioc->taskmgmt_quiesce_io = 1; 6935 if (ioc->alt_ioc) { 6936 ioc->alt_ioc->taskmgmt_in_progress = 1; 6937 ioc->alt_ioc->taskmgmt_quiesce_io = 1; 6938 } 6939 out: 6940 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 6941 return retval; 6942 } 6943 EXPORT_SYMBOL(mpt_set_taskmgmt_in_progress_flag); 6944 6945 /** 6946 * mpt_clear_taskmgmt_in_progress_flag - clear flags associated with task management 6947 * @ioc: Pointer to MPT_ADAPTER structure 6948 * 6949 **/ 6950 void 6951 mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc) 6952 { 6953 unsigned long flags; 6954 6955 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 6956 ioc->taskmgmt_in_progress = 0; 6957 ioc->taskmgmt_quiesce_io = 0; 6958 if (ioc->alt_ioc) { 6959 ioc->alt_ioc->taskmgmt_in_progress = 0; 6960 ioc->alt_ioc->taskmgmt_quiesce_io = 0; 6961 } 6962 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 6963 } 6964 EXPORT_SYMBOL(mpt_clear_taskmgmt_in_progress_flag); 6965 6966 6967 /** 6968 * mpt_halt_firmware - Halts the firmware if it is operational and panic 6969 * the kernel 6970 * @ioc: Pointer to MPT_ADAPTER structure 6971 * 6972 **/ 6973 void 6974 mpt_halt_firmware(MPT_ADAPTER *ioc) 6975 { 6976 u32 ioc_raw_state; 6977 6978 ioc_raw_state = mpt_GetIocState(ioc, 0); 6979 6980 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) { 6981 printk(MYIOC_s_ERR_FMT "IOC is in FAULT state (%04xh)!!!\n", 6982 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK); 6983 panic("%s: IOC Fault (%04xh)!!!\n", ioc->name, 6984 ioc_raw_state & MPI_DOORBELL_DATA_MASK); 6985 } else { 6986 CHIPREG_WRITE32(&ioc->chip->Doorbell, 0xC0FFEE00); 6987 panic("%s: Firmware is halted due to command timeout\n", 6988 ioc->name); 6989 } 6990 } 6991 EXPORT_SYMBOL(mpt_halt_firmware); 6992 6993 /** 6994 * mpt_SoftResetHandler - Issues a less expensive reset 6995 * @ioc: Pointer to MPT_ADAPTER structure 6996 * @sleepFlag: Indicates if sleep or schedule must be called. 6997 * 6998 * Returns 0 for SUCCESS or -1 if FAILED. 6999 * 7000 * Message Unit Reset - instructs the IOC to reset the Reply Post and 7001 * Free FIFO's. All the Message Frames on Reply Free FIFO are discarded. 7002 * All posted buffers are freed, and event notification is turned off. 7003 * IOC doesn't reply to any outstanding request. This will transfer IOC 7004 * to READY state. 7005 **/ 7006 int 7007 mpt_SoftResetHandler(MPT_ADAPTER *ioc, int sleepFlag) 7008 { 7009 int rc; 7010 int ii; 7011 u8 cb_idx; 7012 unsigned long flags; 7013 u32 ioc_state; 7014 unsigned long time_count; 7015 7016 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SoftResetHandler Entered!\n", 7017 ioc->name)); 7018 7019 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK; 7020 7021 if (mpt_fwfault_debug) 7022 mpt_halt_firmware(ioc); 7023 7024 if (ioc_state == MPI_IOC_STATE_FAULT || 7025 ioc_state == MPI_IOC_STATE_RESET) { 7026 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 7027 "skipping, either in FAULT or RESET state!\n", ioc->name)); 7028 return -1; 7029 } 7030 7031 if (ioc->bus_type == FC) { 7032 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 7033 "skipping, because the bus type is FC!\n", ioc->name)); 7034 return -1; 7035 } 7036 7037 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 7038 if (ioc->ioc_reset_in_progress) { 7039 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7040 return -1; 7041 } 7042 ioc->ioc_reset_in_progress = 1; 7043 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7044 7045 rc = -1; 7046 7047 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 7048 if (MptResetHandlers[cb_idx]) 7049 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET); 7050 } 7051 7052 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 7053 if (ioc->taskmgmt_in_progress) { 7054 ioc->ioc_reset_in_progress = 0; 7055 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7056 return -1; 7057 } 7058 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7059 /* Disable reply interrupts (also blocks FreeQ) */ 7060 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); 7061 ioc->active = 0; 7062 time_count = jiffies; 7063 7064 rc = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag); 7065 7066 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 7067 if (MptResetHandlers[cb_idx]) 7068 mpt_signal_reset(cb_idx, ioc, MPT_IOC_PRE_RESET); 7069 } 7070 7071 if (rc) 7072 goto out; 7073 7074 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK; 7075 if (ioc_state != MPI_IOC_STATE_READY) 7076 goto out; 7077 7078 for (ii = 0; ii < 5; ii++) { 7079 /* Get IOC facts! Allow 5 retries */ 7080 rc = GetIocFacts(ioc, sleepFlag, 7081 MPT_HOSTEVENT_IOC_RECOVER); 7082 if (rc == 0) 7083 break; 7084 if (sleepFlag == CAN_SLEEP) 7085 msleep(100); 7086 else 7087 mdelay(100); 7088 } 7089 if (ii == 5) 7090 goto out; 7091 7092 rc = PrimeIocFifos(ioc); 7093 if (rc != 0) 7094 goto out; 7095 7096 rc = SendIocInit(ioc, sleepFlag); 7097 if (rc != 0) 7098 goto out; 7099 7100 rc = SendEventNotification(ioc, 1, sleepFlag); 7101 if (rc != 0) 7102 goto out; 7103 7104 if (ioc->hard_resets < -1) 7105 ioc->hard_resets++; 7106 7107 /* 7108 * At this point, we know soft reset succeeded. 7109 */ 7110 7111 ioc->active = 1; 7112 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM); 7113 7114 out: 7115 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 7116 ioc->ioc_reset_in_progress = 0; 7117 ioc->taskmgmt_quiesce_io = 0; 7118 ioc->taskmgmt_in_progress = 0; 7119 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7120 7121 if (ioc->active) { /* otherwise, hard reset coming */ 7122 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 7123 if (MptResetHandlers[cb_idx]) 7124 mpt_signal_reset(cb_idx, ioc, 7125 MPT_IOC_POST_RESET); 7126 } 7127 } 7128 7129 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 7130 "SoftResetHandler: completed (%d seconds): %s\n", 7131 ioc->name, jiffies_to_msecs(jiffies - time_count)/1000, 7132 ((rc == 0) ? "SUCCESS" : "FAILED"))); 7133 7134 return rc; 7135 } 7136 7137 /** 7138 * mpt_Soft_Hard_ResetHandler - Try less expensive reset 7139 * @ioc: Pointer to MPT_ADAPTER structure 7140 * @sleepFlag: Indicates if sleep or schedule must be called. 7141 * 7142 * Returns 0 for SUCCESS or -1 if FAILED. 7143 * Try for softreset first, only if it fails go for expensive 7144 * HardReset. 7145 **/ 7146 int 7147 mpt_Soft_Hard_ResetHandler(MPT_ADAPTER *ioc, int sleepFlag) { 7148 int ret = -1; 7149 7150 ret = mpt_SoftResetHandler(ioc, sleepFlag); 7151 if (ret == 0) 7152 return ret; 7153 ret = mpt_HardResetHandler(ioc, sleepFlag); 7154 return ret; 7155 } 7156 EXPORT_SYMBOL(mpt_Soft_Hard_ResetHandler); 7157 7158 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 7159 /* 7160 * Reset Handling 7161 */ 7162 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 7163 /** 7164 * mpt_HardResetHandler - Generic reset handler 7165 * @ioc: Pointer to MPT_ADAPTER structure 7166 * @sleepFlag: Indicates if sleep or schedule must be called. 7167 * 7168 * Issues SCSI Task Management call based on input arg values. 7169 * If TaskMgmt fails, returns associated SCSI request. 7170 * 7171 * Remark: _HardResetHandler can be invoked from an interrupt thread (timer) 7172 * or a non-interrupt thread. In the former, must not call schedule(). 7173 * 7174 * Note: A return of -1 is a FATAL error case, as it means a 7175 * FW reload/initialization failed. 7176 * 7177 * Returns 0 for SUCCESS or -1 if FAILED. 7178 */ 7179 int 7180 mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag) 7181 { 7182 int rc; 7183 u8 cb_idx; 7184 unsigned long flags; 7185 unsigned long time_count; 7186 7187 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HardResetHandler Entered!\n", ioc->name)); 7188 #ifdef MFCNT 7189 printk(MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name); 7190 printk("MF count 0x%x !\n", ioc->mfcnt); 7191 #endif 7192 if (mpt_fwfault_debug) 7193 mpt_halt_firmware(ioc); 7194 7195 /* Reset the adapter. Prevent more than 1 call to 7196 * mpt_do_ioc_recovery at any instant in time. 7197 */ 7198 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 7199 if (ioc->ioc_reset_in_progress) { 7200 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7201 ioc->wait_on_reset_completion = 1; 7202 do { 7203 ssleep(1); 7204 } while (ioc->ioc_reset_in_progress == 1); 7205 ioc->wait_on_reset_completion = 0; 7206 return ioc->reset_status; 7207 } 7208 if (ioc->wait_on_reset_completion) { 7209 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7210 rc = 0; 7211 time_count = jiffies; 7212 goto exit; 7213 } 7214 ioc->ioc_reset_in_progress = 1; 7215 if (ioc->alt_ioc) 7216 ioc->alt_ioc->ioc_reset_in_progress = 1; 7217 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7218 7219 7220 /* The SCSI driver needs to adjust timeouts on all current 7221 * commands prior to the diagnostic reset being issued. 7222 * Prevents timeouts occurring during a diagnostic reset...very bad. 7223 * For all other protocol drivers, this is a no-op. 7224 */ 7225 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 7226 if (MptResetHandlers[cb_idx]) { 7227 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET); 7228 if (ioc->alt_ioc) 7229 mpt_signal_reset(cb_idx, ioc->alt_ioc, 7230 MPT_IOC_SETUP_RESET); 7231 } 7232 } 7233 7234 time_count = jiffies; 7235 rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag); 7236 if (rc != 0) { 7237 printk(KERN_WARNING MYNAM 7238 ": WARNING - (%d) Cannot recover %s, doorbell=0x%08x\n", 7239 rc, ioc->name, mpt_GetIocState(ioc, 0)); 7240 } else { 7241 if (ioc->hard_resets < -1) 7242 ioc->hard_resets++; 7243 } 7244 7245 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 7246 ioc->ioc_reset_in_progress = 0; 7247 ioc->taskmgmt_quiesce_io = 0; 7248 ioc->taskmgmt_in_progress = 0; 7249 ioc->reset_status = rc; 7250 if (ioc->alt_ioc) { 7251 ioc->alt_ioc->ioc_reset_in_progress = 0; 7252 ioc->alt_ioc->taskmgmt_quiesce_io = 0; 7253 ioc->alt_ioc->taskmgmt_in_progress = 0; 7254 } 7255 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7256 7257 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 7258 if (MptResetHandlers[cb_idx]) { 7259 mpt_signal_reset(cb_idx, ioc, MPT_IOC_POST_RESET); 7260 if (ioc->alt_ioc) 7261 mpt_signal_reset(cb_idx, 7262 ioc->alt_ioc, MPT_IOC_POST_RESET); 7263 } 7264 } 7265 exit: 7266 dtmprintk(ioc, 7267 printk(MYIOC_s_DEBUG_FMT 7268 "HardResetHandler: completed (%d seconds): %s\n", ioc->name, 7269 jiffies_to_msecs(jiffies - time_count)/1000, ((rc == 0) ? 7270 "SUCCESS" : "FAILED"))); 7271 7272 return rc; 7273 } 7274 7275 #ifdef CONFIG_FUSION_LOGGING 7276 static void 7277 mpt_display_event_info(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply) 7278 { 7279 char *ds = NULL; 7280 u32 evData0; 7281 int ii; 7282 u8 event; 7283 char *evStr = ioc->evStr; 7284 7285 event = le32_to_cpu(pEventReply->Event) & 0xFF; 7286 evData0 = le32_to_cpu(pEventReply->Data[0]); 7287 7288 switch(event) { 7289 case MPI_EVENT_NONE: 7290 ds = "None"; 7291 break; 7292 case MPI_EVENT_LOG_DATA: 7293 ds = "Log Data"; 7294 break; 7295 case MPI_EVENT_STATE_CHANGE: 7296 ds = "State Change"; 7297 break; 7298 case MPI_EVENT_UNIT_ATTENTION: 7299 ds = "Unit Attention"; 7300 break; 7301 case MPI_EVENT_IOC_BUS_RESET: 7302 ds = "IOC Bus Reset"; 7303 break; 7304 case MPI_EVENT_EXT_BUS_RESET: 7305 ds = "External Bus Reset"; 7306 break; 7307 case MPI_EVENT_RESCAN: 7308 ds = "Bus Rescan Event"; 7309 break; 7310 case MPI_EVENT_LINK_STATUS_CHANGE: 7311 if (evData0 == MPI_EVENT_LINK_STATUS_FAILURE) 7312 ds = "Link Status(FAILURE) Change"; 7313 else 7314 ds = "Link Status(ACTIVE) Change"; 7315 break; 7316 case MPI_EVENT_LOOP_STATE_CHANGE: 7317 if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LIP) 7318 ds = "Loop State(LIP) Change"; 7319 else if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LPE) 7320 ds = "Loop State(LPE) Change"; 7321 else 7322 ds = "Loop State(LPB) Change"; 7323 break; 7324 case MPI_EVENT_LOGOUT: 7325 ds = "Logout"; 7326 break; 7327 case MPI_EVENT_EVENT_CHANGE: 7328 if (evData0) 7329 ds = "Events ON"; 7330 else 7331 ds = "Events OFF"; 7332 break; 7333 case MPI_EVENT_INTEGRATED_RAID: 7334 { 7335 u8 ReasonCode = (u8)(evData0 >> 16); 7336 switch (ReasonCode) { 7337 case MPI_EVENT_RAID_RC_VOLUME_CREATED : 7338 ds = "Integrated Raid: Volume Created"; 7339 break; 7340 case MPI_EVENT_RAID_RC_VOLUME_DELETED : 7341 ds = "Integrated Raid: Volume Deleted"; 7342 break; 7343 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED : 7344 ds = "Integrated Raid: Volume Settings Changed"; 7345 break; 7346 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED : 7347 ds = "Integrated Raid: Volume Status Changed"; 7348 break; 7349 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED : 7350 ds = "Integrated Raid: Volume Physdisk Changed"; 7351 break; 7352 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED : 7353 ds = "Integrated Raid: Physdisk Created"; 7354 break; 7355 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED : 7356 ds = "Integrated Raid: Physdisk Deleted"; 7357 break; 7358 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED : 7359 ds = "Integrated Raid: Physdisk Settings Changed"; 7360 break; 7361 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED : 7362 ds = "Integrated Raid: Physdisk Status Changed"; 7363 break; 7364 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED : 7365 ds = "Integrated Raid: Domain Validation Needed"; 7366 break; 7367 case MPI_EVENT_RAID_RC_SMART_DATA : 7368 ds = "Integrated Raid; Smart Data"; 7369 break; 7370 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED : 7371 ds = "Integrated Raid: Replace Action Started"; 7372 break; 7373 default: 7374 ds = "Integrated Raid"; 7375 break; 7376 } 7377 break; 7378 } 7379 case MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE: 7380 ds = "SCSI Device Status Change"; 7381 break; 7382 case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE: 7383 { 7384 u8 id = (u8)(evData0); 7385 u8 channel = (u8)(evData0 >> 8); 7386 u8 ReasonCode = (u8)(evData0 >> 16); 7387 switch (ReasonCode) { 7388 case MPI_EVENT_SAS_DEV_STAT_RC_ADDED: 7389 snprintf(evStr, EVENT_DESCR_STR_SZ, 7390 "SAS Device Status Change: Added: " 7391 "id=%d channel=%d", id, channel); 7392 break; 7393 case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING: 7394 snprintf(evStr, EVENT_DESCR_STR_SZ, 7395 "SAS Device Status Change: Deleted: " 7396 "id=%d channel=%d", id, channel); 7397 break; 7398 case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA: 7399 snprintf(evStr, EVENT_DESCR_STR_SZ, 7400 "SAS Device Status Change: SMART Data: " 7401 "id=%d channel=%d", id, channel); 7402 break; 7403 case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED: 7404 snprintf(evStr, EVENT_DESCR_STR_SZ, 7405 "SAS Device Status Change: No Persistancy: " 7406 "id=%d channel=%d", id, channel); 7407 break; 7408 case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED: 7409 snprintf(evStr, EVENT_DESCR_STR_SZ, 7410 "SAS Device Status Change: Unsupported Device " 7411 "Discovered : id=%d channel=%d", id, channel); 7412 break; 7413 case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET: 7414 snprintf(evStr, EVENT_DESCR_STR_SZ, 7415 "SAS Device Status Change: Internal Device " 7416 "Reset : id=%d channel=%d", id, channel); 7417 break; 7418 case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL: 7419 snprintf(evStr, EVENT_DESCR_STR_SZ, 7420 "SAS Device Status Change: Internal Task " 7421 "Abort : id=%d channel=%d", id, channel); 7422 break; 7423 case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL: 7424 snprintf(evStr, EVENT_DESCR_STR_SZ, 7425 "SAS Device Status Change: Internal Abort " 7426 "Task Set : id=%d channel=%d", id, channel); 7427 break; 7428 case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL: 7429 snprintf(evStr, EVENT_DESCR_STR_SZ, 7430 "SAS Device Status Change: Internal Clear " 7431 "Task Set : id=%d channel=%d", id, channel); 7432 break; 7433 case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL: 7434 snprintf(evStr, EVENT_DESCR_STR_SZ, 7435 "SAS Device Status Change: Internal Query " 7436 "Task : id=%d channel=%d", id, channel); 7437 break; 7438 default: 7439 snprintf(evStr, EVENT_DESCR_STR_SZ, 7440 "SAS Device Status Change: Unknown: " 7441 "id=%d channel=%d", id, channel); 7442 break; 7443 } 7444 break; 7445 } 7446 case MPI_EVENT_ON_BUS_TIMER_EXPIRED: 7447 ds = "Bus Timer Expired"; 7448 break; 7449 case MPI_EVENT_QUEUE_FULL: 7450 { 7451 u16 curr_depth = (u16)(evData0 >> 16); 7452 u8 channel = (u8)(evData0 >> 8); 7453 u8 id = (u8)(evData0); 7454 7455 snprintf(evStr, EVENT_DESCR_STR_SZ, 7456 "Queue Full: channel=%d id=%d depth=%d", 7457 channel, id, curr_depth); 7458 break; 7459 } 7460 case MPI_EVENT_SAS_SES: 7461 ds = "SAS SES Event"; 7462 break; 7463 case MPI_EVENT_PERSISTENT_TABLE_FULL: 7464 ds = "Persistent Table Full"; 7465 break; 7466 case MPI_EVENT_SAS_PHY_LINK_STATUS: 7467 { 7468 u8 LinkRates = (u8)(evData0 >> 8); 7469 u8 PhyNumber = (u8)(evData0); 7470 LinkRates = (LinkRates & MPI_EVENT_SAS_PLS_LR_CURRENT_MASK) >> 7471 MPI_EVENT_SAS_PLS_LR_CURRENT_SHIFT; 7472 switch (LinkRates) { 7473 case MPI_EVENT_SAS_PLS_LR_RATE_UNKNOWN: 7474 snprintf(evStr, EVENT_DESCR_STR_SZ, 7475 "SAS PHY Link Status: Phy=%d:" 7476 " Rate Unknown",PhyNumber); 7477 break; 7478 case MPI_EVENT_SAS_PLS_LR_RATE_PHY_DISABLED: 7479 snprintf(evStr, EVENT_DESCR_STR_SZ, 7480 "SAS PHY Link Status: Phy=%d:" 7481 " Phy Disabled",PhyNumber); 7482 break; 7483 case MPI_EVENT_SAS_PLS_LR_RATE_FAILED_SPEED_NEGOTIATION: 7484 snprintf(evStr, EVENT_DESCR_STR_SZ, 7485 "SAS PHY Link Status: Phy=%d:" 7486 " Failed Speed Nego",PhyNumber); 7487 break; 7488 case MPI_EVENT_SAS_PLS_LR_RATE_SATA_OOB_COMPLETE: 7489 snprintf(evStr, EVENT_DESCR_STR_SZ, 7490 "SAS PHY Link Status: Phy=%d:" 7491 " Sata OOB Completed",PhyNumber); 7492 break; 7493 case MPI_EVENT_SAS_PLS_LR_RATE_1_5: 7494 snprintf(evStr, EVENT_DESCR_STR_SZ, 7495 "SAS PHY Link Status: Phy=%d:" 7496 " Rate 1.5 Gbps",PhyNumber); 7497 break; 7498 case MPI_EVENT_SAS_PLS_LR_RATE_3_0: 7499 snprintf(evStr, EVENT_DESCR_STR_SZ, 7500 "SAS PHY Link Status: Phy=%d:" 7501 " Rate 3.0 Gbps", PhyNumber); 7502 break; 7503 case MPI_EVENT_SAS_PLS_LR_RATE_6_0: 7504 snprintf(evStr, EVENT_DESCR_STR_SZ, 7505 "SAS PHY Link Status: Phy=%d:" 7506 " Rate 6.0 Gbps", PhyNumber); 7507 break; 7508 default: 7509 snprintf(evStr, EVENT_DESCR_STR_SZ, 7510 "SAS PHY Link Status: Phy=%d", PhyNumber); 7511 break; 7512 } 7513 break; 7514 } 7515 case MPI_EVENT_SAS_DISCOVERY_ERROR: 7516 ds = "SAS Discovery Error"; 7517 break; 7518 case MPI_EVENT_IR_RESYNC_UPDATE: 7519 { 7520 u8 resync_complete = (u8)(evData0 >> 16); 7521 snprintf(evStr, EVENT_DESCR_STR_SZ, 7522 "IR Resync Update: Complete = %d:",resync_complete); 7523 break; 7524 } 7525 case MPI_EVENT_IR2: 7526 { 7527 u8 id = (u8)(evData0); 7528 u8 channel = (u8)(evData0 >> 8); 7529 u8 phys_num = (u8)(evData0 >> 24); 7530 u8 ReasonCode = (u8)(evData0 >> 16); 7531 7532 switch (ReasonCode) { 7533 case MPI_EVENT_IR2_RC_LD_STATE_CHANGED: 7534 snprintf(evStr, EVENT_DESCR_STR_SZ, 7535 "IR2: LD State Changed: " 7536 "id=%d channel=%d phys_num=%d", 7537 id, channel, phys_num); 7538 break; 7539 case MPI_EVENT_IR2_RC_PD_STATE_CHANGED: 7540 snprintf(evStr, EVENT_DESCR_STR_SZ, 7541 "IR2: PD State Changed " 7542 "id=%d channel=%d phys_num=%d", 7543 id, channel, phys_num); 7544 break; 7545 case MPI_EVENT_IR2_RC_BAD_BLOCK_TABLE_FULL: 7546 snprintf(evStr, EVENT_DESCR_STR_SZ, 7547 "IR2: Bad Block Table Full: " 7548 "id=%d channel=%d phys_num=%d", 7549 id, channel, phys_num); 7550 break; 7551 case MPI_EVENT_IR2_RC_PD_INSERTED: 7552 snprintf(evStr, EVENT_DESCR_STR_SZ, 7553 "IR2: PD Inserted: " 7554 "id=%d channel=%d phys_num=%d", 7555 id, channel, phys_num); 7556 break; 7557 case MPI_EVENT_IR2_RC_PD_REMOVED: 7558 snprintf(evStr, EVENT_DESCR_STR_SZ, 7559 "IR2: PD Removed: " 7560 "id=%d channel=%d phys_num=%d", 7561 id, channel, phys_num); 7562 break; 7563 case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED: 7564 snprintf(evStr, EVENT_DESCR_STR_SZ, 7565 "IR2: Foreign CFG Detected: " 7566 "id=%d channel=%d phys_num=%d", 7567 id, channel, phys_num); 7568 break; 7569 case MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR: 7570 snprintf(evStr, EVENT_DESCR_STR_SZ, 7571 "IR2: Rebuild Medium Error: " 7572 "id=%d channel=%d phys_num=%d", 7573 id, channel, phys_num); 7574 break; 7575 case MPI_EVENT_IR2_RC_DUAL_PORT_ADDED: 7576 snprintf(evStr, EVENT_DESCR_STR_SZ, 7577 "IR2: Dual Port Added: " 7578 "id=%d channel=%d phys_num=%d", 7579 id, channel, phys_num); 7580 break; 7581 case MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED: 7582 snprintf(evStr, EVENT_DESCR_STR_SZ, 7583 "IR2: Dual Port Removed: " 7584 "id=%d channel=%d phys_num=%d", 7585 id, channel, phys_num); 7586 break; 7587 default: 7588 ds = "IR2"; 7589 break; 7590 } 7591 break; 7592 } 7593 case MPI_EVENT_SAS_DISCOVERY: 7594 { 7595 if (evData0) 7596 ds = "SAS Discovery: Start"; 7597 else 7598 ds = "SAS Discovery: Stop"; 7599 break; 7600 } 7601 case MPI_EVENT_LOG_ENTRY_ADDED: 7602 ds = "SAS Log Entry Added"; 7603 break; 7604 7605 case MPI_EVENT_SAS_BROADCAST_PRIMITIVE: 7606 { 7607 u8 phy_num = (u8)(evData0); 7608 u8 port_num = (u8)(evData0 >> 8); 7609 u8 port_width = (u8)(evData0 >> 16); 7610 u8 primative = (u8)(evData0 >> 24); 7611 snprintf(evStr, EVENT_DESCR_STR_SZ, 7612 "SAS Broadcase Primative: phy=%d port=%d " 7613 "width=%d primative=0x%02x", 7614 phy_num, port_num, port_width, primative); 7615 break; 7616 } 7617 7618 case MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE: 7619 { 7620 u8 reason = (u8)(evData0); 7621 7622 switch (reason) { 7623 case MPI_EVENT_SAS_INIT_RC_ADDED: 7624 ds = "SAS Initiator Status Change: Added"; 7625 break; 7626 case MPI_EVENT_SAS_INIT_RC_REMOVED: 7627 ds = "SAS Initiator Status Change: Deleted"; 7628 break; 7629 default: 7630 ds = "SAS Initiator Status Change"; 7631 break; 7632 } 7633 break; 7634 } 7635 7636 case MPI_EVENT_SAS_INIT_TABLE_OVERFLOW: 7637 { 7638 u8 max_init = (u8)(evData0); 7639 u8 current_init = (u8)(evData0 >> 8); 7640 7641 snprintf(evStr, EVENT_DESCR_STR_SZ, 7642 "SAS Initiator Device Table Overflow: max initiators=%02d " 7643 "current initators=%02d", 7644 max_init, current_init); 7645 break; 7646 } 7647 case MPI_EVENT_SAS_SMP_ERROR: 7648 { 7649 u8 status = (u8)(evData0); 7650 u8 port_num = (u8)(evData0 >> 8); 7651 u8 result = (u8)(evData0 >> 16); 7652 7653 if (status == MPI_EVENT_SAS_SMP_FUNCTION_RESULT_VALID) 7654 snprintf(evStr, EVENT_DESCR_STR_SZ, 7655 "SAS SMP Error: port=%d result=0x%02x", 7656 port_num, result); 7657 else if (status == MPI_EVENT_SAS_SMP_CRC_ERROR) 7658 snprintf(evStr, EVENT_DESCR_STR_SZ, 7659 "SAS SMP Error: port=%d : CRC Error", 7660 port_num); 7661 else if (status == MPI_EVENT_SAS_SMP_TIMEOUT) 7662 snprintf(evStr, EVENT_DESCR_STR_SZ, 7663 "SAS SMP Error: port=%d : Timeout", 7664 port_num); 7665 else if (status == MPI_EVENT_SAS_SMP_NO_DESTINATION) 7666 snprintf(evStr, EVENT_DESCR_STR_SZ, 7667 "SAS SMP Error: port=%d : No Destination", 7668 port_num); 7669 else if (status == MPI_EVENT_SAS_SMP_BAD_DESTINATION) 7670 snprintf(evStr, EVENT_DESCR_STR_SZ, 7671 "SAS SMP Error: port=%d : Bad Destination", 7672 port_num); 7673 else 7674 snprintf(evStr, EVENT_DESCR_STR_SZ, 7675 "SAS SMP Error: port=%d : status=0x%02x", 7676 port_num, status); 7677 break; 7678 } 7679 7680 case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE: 7681 { 7682 u8 reason = (u8)(evData0); 7683 7684 switch (reason) { 7685 case MPI_EVENT_SAS_EXP_RC_ADDED: 7686 ds = "Expander Status Change: Added"; 7687 break; 7688 case MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING: 7689 ds = "Expander Status Change: Deleted"; 7690 break; 7691 default: 7692 ds = "Expander Status Change"; 7693 break; 7694 } 7695 break; 7696 } 7697 7698 /* 7699 * MPT base "custom" events may be added here... 7700 */ 7701 default: 7702 ds = "Unknown"; 7703 break; 7704 } 7705 if (ds) 7706 strncpy(evStr, ds, EVENT_DESCR_STR_SZ); 7707 7708 7709 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT 7710 "MPT event:(%02Xh) : %s\n", 7711 ioc->name, event, evStr)); 7712 7713 devtverboseprintk(ioc, printk(KERN_DEBUG MYNAM 7714 ": Event data:\n")); 7715 for (ii = 0; ii < le16_to_cpu(pEventReply->EventDataLength); ii++) 7716 devtverboseprintk(ioc, printk(" %08x", 7717 le32_to_cpu(pEventReply->Data[ii]))); 7718 devtverboseprintk(ioc, printk(KERN_DEBUG "\n")); 7719 } 7720 #endif 7721 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 7722 /** 7723 * ProcessEventNotification - Route EventNotificationReply to all event handlers 7724 * @ioc: Pointer to MPT_ADAPTER structure 7725 * @pEventReply: Pointer to EventNotification reply frame 7726 * @evHandlers: Pointer to integer, number of event handlers 7727 * 7728 * Routes a received EventNotificationReply to all currently registered 7729 * event handlers. 7730 * Returns sum of event handlers return values. 7731 */ 7732 static int 7733 ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply, int *evHandlers) 7734 { 7735 u16 evDataLen; 7736 u32 evData0 = 0; 7737 int ii; 7738 u8 cb_idx; 7739 int r = 0; 7740 int handlers = 0; 7741 u8 event; 7742 7743 /* 7744 * Do platform normalization of values 7745 */ 7746 event = le32_to_cpu(pEventReply->Event) & 0xFF; 7747 evDataLen = le16_to_cpu(pEventReply->EventDataLength); 7748 if (evDataLen) { 7749 evData0 = le32_to_cpu(pEventReply->Data[0]); 7750 } 7751 7752 #ifdef CONFIG_FUSION_LOGGING 7753 if (evDataLen) 7754 mpt_display_event_info(ioc, pEventReply); 7755 #endif 7756 7757 /* 7758 * Do general / base driver event processing 7759 */ 7760 switch(event) { 7761 case MPI_EVENT_EVENT_CHANGE: /* 0A */ 7762 if (evDataLen) { 7763 u8 evState = evData0 & 0xFF; 7764 7765 /* CHECKME! What if evState unexpectedly says OFF (0)? */ 7766 7767 /* Update EventState field in cached IocFacts */ 7768 if (ioc->facts.Function) { 7769 ioc->facts.EventState = evState; 7770 } 7771 } 7772 break; 7773 case MPI_EVENT_INTEGRATED_RAID: 7774 mptbase_raid_process_event_data(ioc, 7775 (MpiEventDataRaid_t *)pEventReply->Data); 7776 break; 7777 default: 7778 break; 7779 } 7780 7781 /* 7782 * Should this event be logged? Events are written sequentially. 7783 * When buffer is full, start again at the top. 7784 */ 7785 if (ioc->events && (ioc->eventTypes & ( 1 << event))) { 7786 int idx; 7787 7788 idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE; 7789 7790 ioc->events[idx].event = event; 7791 ioc->events[idx].eventContext = ioc->eventContext; 7792 7793 for (ii = 0; ii < 2; ii++) { 7794 if (ii < evDataLen) 7795 ioc->events[idx].data[ii] = le32_to_cpu(pEventReply->Data[ii]); 7796 else 7797 ioc->events[idx].data[ii] = 0; 7798 } 7799 7800 ioc->eventContext++; 7801 } 7802 7803 7804 /* 7805 * Call each currently registered protocol event handler. 7806 */ 7807 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 7808 if (MptEvHandlers[cb_idx]) { 7809 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT 7810 "Routing Event to event handler #%d\n", 7811 ioc->name, cb_idx)); 7812 r += (*(MptEvHandlers[cb_idx]))(ioc, pEventReply); 7813 handlers++; 7814 } 7815 } 7816 /* FIXME? Examine results here? */ 7817 7818 /* 7819 * If needed, send (a single) EventAck. 7820 */ 7821 if (pEventReply->AckRequired == MPI_EVENT_NOTIFICATION_ACK_REQUIRED) { 7822 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT 7823 "EventAck required\n",ioc->name)); 7824 if ((ii = SendEventAck(ioc, pEventReply)) != 0) { 7825 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SendEventAck returned %d\n", 7826 ioc->name, ii)); 7827 } 7828 } 7829 7830 *evHandlers = handlers; 7831 return r; 7832 } 7833 7834 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 7835 /** 7836 * mpt_fc_log_info - Log information returned from Fibre Channel IOC. 7837 * @ioc: Pointer to MPT_ADAPTER structure 7838 * @log_info: U32 LogInfo reply word from the IOC 7839 * 7840 * Refer to lsi/mpi_log_fc.h. 7841 */ 7842 static void 7843 mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info) 7844 { 7845 char *desc = "unknown"; 7846 7847 switch (log_info & 0xFF000000) { 7848 case MPI_IOCLOGINFO_FC_INIT_BASE: 7849 desc = "FCP Initiator"; 7850 break; 7851 case MPI_IOCLOGINFO_FC_TARGET_BASE: 7852 desc = "FCP Target"; 7853 break; 7854 case MPI_IOCLOGINFO_FC_LAN_BASE: 7855 desc = "LAN"; 7856 break; 7857 case MPI_IOCLOGINFO_FC_MSG_BASE: 7858 desc = "MPI Message Layer"; 7859 break; 7860 case MPI_IOCLOGINFO_FC_LINK_BASE: 7861 desc = "FC Link"; 7862 break; 7863 case MPI_IOCLOGINFO_FC_CTX_BASE: 7864 desc = "Context Manager"; 7865 break; 7866 case MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET: 7867 desc = "Invalid Field Offset"; 7868 break; 7869 case MPI_IOCLOGINFO_FC_STATE_CHANGE: 7870 desc = "State Change Info"; 7871 break; 7872 } 7873 7874 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): SubClass={%s}, Value=(0x%06x)\n", 7875 ioc->name, log_info, desc, (log_info & 0xFFFFFF)); 7876 } 7877 7878 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 7879 /** 7880 * mpt_spi_log_info - Log information returned from SCSI Parallel IOC. 7881 * @ioc: Pointer to MPT_ADAPTER structure 7882 * @log_info: U32 LogInfo word from the IOC 7883 * 7884 * Refer to lsi/sp_log.h. 7885 */ 7886 static void 7887 mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info) 7888 { 7889 u32 info = log_info & 0x00FF0000; 7890 char *desc = "unknown"; 7891 7892 switch (info) { 7893 case 0x00010000: 7894 desc = "bug! MID not found"; 7895 break; 7896 7897 case 0x00020000: 7898 desc = "Parity Error"; 7899 break; 7900 7901 case 0x00030000: 7902 desc = "ASYNC Outbound Overrun"; 7903 break; 7904 7905 case 0x00040000: 7906 desc = "SYNC Offset Error"; 7907 break; 7908 7909 case 0x00050000: 7910 desc = "BM Change"; 7911 break; 7912 7913 case 0x00060000: 7914 desc = "Msg In Overflow"; 7915 break; 7916 7917 case 0x00070000: 7918 desc = "DMA Error"; 7919 break; 7920 7921 case 0x00080000: 7922 desc = "Outbound DMA Overrun"; 7923 break; 7924 7925 case 0x00090000: 7926 desc = "Task Management"; 7927 break; 7928 7929 case 0x000A0000: 7930 desc = "Device Problem"; 7931 break; 7932 7933 case 0x000B0000: 7934 desc = "Invalid Phase Change"; 7935 break; 7936 7937 case 0x000C0000: 7938 desc = "Untagged Table Size"; 7939 break; 7940 7941 } 7942 7943 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc); 7944 } 7945 7946 /* strings for sas loginfo */ 7947 static char *originator_str[] = { 7948 "IOP", /* 00h */ 7949 "PL", /* 01h */ 7950 "IR" /* 02h */ 7951 }; 7952 static char *iop_code_str[] = { 7953 NULL, /* 00h */ 7954 "Invalid SAS Address", /* 01h */ 7955 NULL, /* 02h */ 7956 "Invalid Page", /* 03h */ 7957 "Diag Message Error", /* 04h */ 7958 "Task Terminated", /* 05h */ 7959 "Enclosure Management", /* 06h */ 7960 "Target Mode" /* 07h */ 7961 }; 7962 static char *pl_code_str[] = { 7963 NULL, /* 00h */ 7964 "Open Failure", /* 01h */ 7965 "Invalid Scatter Gather List", /* 02h */ 7966 "Wrong Relative Offset or Frame Length", /* 03h */ 7967 "Frame Transfer Error", /* 04h */ 7968 "Transmit Frame Connected Low", /* 05h */ 7969 "SATA Non-NCQ RW Error Bit Set", /* 06h */ 7970 "SATA Read Log Receive Data Error", /* 07h */ 7971 "SATA NCQ Fail All Commands After Error", /* 08h */ 7972 "SATA Error in Receive Set Device Bit FIS", /* 09h */ 7973 "Receive Frame Invalid Message", /* 0Ah */ 7974 "Receive Context Message Valid Error", /* 0Bh */ 7975 "Receive Frame Current Frame Error", /* 0Ch */ 7976 "SATA Link Down", /* 0Dh */ 7977 "Discovery SATA Init W IOS", /* 0Eh */ 7978 "Config Invalid Page", /* 0Fh */ 7979 "Discovery SATA Init Timeout", /* 10h */ 7980 "Reset", /* 11h */ 7981 "Abort", /* 12h */ 7982 "IO Not Yet Executed", /* 13h */ 7983 "IO Executed", /* 14h */ 7984 "Persistent Reservation Out Not Affiliation " 7985 "Owner", /* 15h */ 7986 "Open Transmit DMA Abort", /* 16h */ 7987 "IO Device Missing Delay Retry", /* 17h */ 7988 "IO Cancelled Due to Receive Error", /* 18h */ 7989 NULL, /* 19h */ 7990 NULL, /* 1Ah */ 7991 NULL, /* 1Bh */ 7992 NULL, /* 1Ch */ 7993 NULL, /* 1Dh */ 7994 NULL, /* 1Eh */ 7995 NULL, /* 1Fh */ 7996 "Enclosure Management" /* 20h */ 7997 }; 7998 static char *ir_code_str[] = { 7999 "Raid Action Error", /* 00h */ 8000 NULL, /* 00h */ 8001 NULL, /* 01h */ 8002 NULL, /* 02h */ 8003 NULL, /* 03h */ 8004 NULL, /* 04h */ 8005 NULL, /* 05h */ 8006 NULL, /* 06h */ 8007 NULL /* 07h */ 8008 }; 8009 static char *raid_sub_code_str[] = { 8010 NULL, /* 00h */ 8011 "Volume Creation Failed: Data Passed too " 8012 "Large", /* 01h */ 8013 "Volume Creation Failed: Duplicate Volumes " 8014 "Attempted", /* 02h */ 8015 "Volume Creation Failed: Max Number " 8016 "Supported Volumes Exceeded", /* 03h */ 8017 "Volume Creation Failed: DMA Error", /* 04h */ 8018 "Volume Creation Failed: Invalid Volume Type", /* 05h */ 8019 "Volume Creation Failed: Error Reading " 8020 "MFG Page 4", /* 06h */ 8021 "Volume Creation Failed: Creating Internal " 8022 "Structures", /* 07h */ 8023 NULL, /* 08h */ 8024 NULL, /* 09h */ 8025 NULL, /* 0Ah */ 8026 NULL, /* 0Bh */ 8027 NULL, /* 0Ch */ 8028 NULL, /* 0Dh */ 8029 NULL, /* 0Eh */ 8030 NULL, /* 0Fh */ 8031 "Activation failed: Already Active Volume", /* 10h */ 8032 "Activation failed: Unsupported Volume Type", /* 11h */ 8033 "Activation failed: Too Many Active Volumes", /* 12h */ 8034 "Activation failed: Volume ID in Use", /* 13h */ 8035 "Activation failed: Reported Failure", /* 14h */ 8036 "Activation failed: Importing a Volume", /* 15h */ 8037 NULL, /* 16h */ 8038 NULL, /* 17h */ 8039 NULL, /* 18h */ 8040 NULL, /* 19h */ 8041 NULL, /* 1Ah */ 8042 NULL, /* 1Bh */ 8043 NULL, /* 1Ch */ 8044 NULL, /* 1Dh */ 8045 NULL, /* 1Eh */ 8046 NULL, /* 1Fh */ 8047 "Phys Disk failed: Too Many Phys Disks", /* 20h */ 8048 "Phys Disk failed: Data Passed too Large", /* 21h */ 8049 "Phys Disk failed: DMA Error", /* 22h */ 8050 "Phys Disk failed: Invalid <channel:id>", /* 23h */ 8051 "Phys Disk failed: Creating Phys Disk Config " 8052 "Page", /* 24h */ 8053 NULL, /* 25h */ 8054 NULL, /* 26h */ 8055 NULL, /* 27h */ 8056 NULL, /* 28h */ 8057 NULL, /* 29h */ 8058 NULL, /* 2Ah */ 8059 NULL, /* 2Bh */ 8060 NULL, /* 2Ch */ 8061 NULL, /* 2Dh */ 8062 NULL, /* 2Eh */ 8063 NULL, /* 2Fh */ 8064 "Compatibility Error: IR Disabled", /* 30h */ 8065 "Compatibility Error: Inquiry Command Failed", /* 31h */ 8066 "Compatibility Error: Device not Direct Access " 8067 "Device ", /* 32h */ 8068 "Compatibility Error: Removable Device Found", /* 33h */ 8069 "Compatibility Error: Device SCSI Version not " 8070 "2 or Higher", /* 34h */ 8071 "Compatibility Error: SATA Device, 48 BIT LBA " 8072 "not Supported", /* 35h */ 8073 "Compatibility Error: Device doesn't have " 8074 "512 Byte Block Sizes", /* 36h */ 8075 "Compatibility Error: Volume Type Check Failed", /* 37h */ 8076 "Compatibility Error: Volume Type is " 8077 "Unsupported by FW", /* 38h */ 8078 "Compatibility Error: Disk Drive too Small for " 8079 "use in Volume", /* 39h */ 8080 "Compatibility Error: Phys Disk for Create " 8081 "Volume not Found", /* 3Ah */ 8082 "Compatibility Error: Too Many or too Few " 8083 "Disks for Volume Type", /* 3Bh */ 8084 "Compatibility Error: Disk stripe Sizes " 8085 "Must be 64KB", /* 3Ch */ 8086 "Compatibility Error: IME Size Limited to < 2TB", /* 3Dh */ 8087 }; 8088 8089 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 8090 /** 8091 * mpt_sas_log_info - Log information returned from SAS IOC. 8092 * @ioc: Pointer to MPT_ADAPTER structure 8093 * @log_info: U32 LogInfo reply word from the IOC 8094 * @cb_idx: callback function's handle 8095 * 8096 * Refer to lsi/mpi_log_sas.h. 8097 **/ 8098 static void 8099 mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info, u8 cb_idx) 8100 { 8101 union loginfo_type { 8102 u32 loginfo; 8103 struct { 8104 u32 subcode:16; 8105 u32 code:8; 8106 u32 originator:4; 8107 u32 bus_type:4; 8108 }dw; 8109 }; 8110 union loginfo_type sas_loginfo; 8111 char *originator_desc = NULL; 8112 char *code_desc = NULL; 8113 char *sub_code_desc = NULL; 8114 8115 sas_loginfo.loginfo = log_info; 8116 if ((sas_loginfo.dw.bus_type != 3 /*SAS*/) && 8117 (sas_loginfo.dw.originator < ARRAY_SIZE(originator_str))) 8118 return; 8119 8120 originator_desc = originator_str[sas_loginfo.dw.originator]; 8121 8122 switch (sas_loginfo.dw.originator) { 8123 8124 case 0: /* IOP */ 8125 if (sas_loginfo.dw.code < 8126 ARRAY_SIZE(iop_code_str)) 8127 code_desc = iop_code_str[sas_loginfo.dw.code]; 8128 break; 8129 case 1: /* PL */ 8130 if (sas_loginfo.dw.code < 8131 ARRAY_SIZE(pl_code_str)) 8132 code_desc = pl_code_str[sas_loginfo.dw.code]; 8133 break; 8134 case 2: /* IR */ 8135 if (sas_loginfo.dw.code >= 8136 ARRAY_SIZE(ir_code_str)) 8137 break; 8138 code_desc = ir_code_str[sas_loginfo.dw.code]; 8139 if (sas_loginfo.dw.subcode >= 8140 ARRAY_SIZE(raid_sub_code_str)) 8141 break; 8142 if (sas_loginfo.dw.code == 0) 8143 sub_code_desc = 8144 raid_sub_code_str[sas_loginfo.dw.subcode]; 8145 break; 8146 default: 8147 return; 8148 } 8149 8150 if (sub_code_desc != NULL) 8151 printk(MYIOC_s_INFO_FMT 8152 "LogInfo(0x%08x): Originator={%s}, Code={%s}," 8153 " SubCode={%s} cb_idx %s\n", 8154 ioc->name, log_info, originator_desc, code_desc, 8155 sub_code_desc, MptCallbacksName[cb_idx]); 8156 else if (code_desc != NULL) 8157 printk(MYIOC_s_INFO_FMT 8158 "LogInfo(0x%08x): Originator={%s}, Code={%s}," 8159 " SubCode(0x%04x) cb_idx %s\n", 8160 ioc->name, log_info, originator_desc, code_desc, 8161 sas_loginfo.dw.subcode, MptCallbacksName[cb_idx]); 8162 else 8163 printk(MYIOC_s_INFO_FMT 8164 "LogInfo(0x%08x): Originator={%s}, Code=(0x%02x)," 8165 " SubCode(0x%04x) cb_idx %s\n", 8166 ioc->name, log_info, originator_desc, 8167 sas_loginfo.dw.code, sas_loginfo.dw.subcode, 8168 MptCallbacksName[cb_idx]); 8169 } 8170 8171 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 8172 /** 8173 * mpt_iocstatus_info_config - IOCSTATUS information for config pages 8174 * @ioc: Pointer to MPT_ADAPTER structure 8175 * @ioc_status: U32 IOCStatus word from IOC 8176 * @mf: Pointer to MPT request frame 8177 * 8178 * Refer to lsi/mpi.h. 8179 **/ 8180 static void 8181 mpt_iocstatus_info_config(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf) 8182 { 8183 Config_t *pReq = (Config_t *)mf; 8184 char extend_desc[EVENT_DESCR_STR_SZ]; 8185 char *desc = NULL; 8186 u32 form; 8187 u8 page_type; 8188 8189 if (pReq->Header.PageType == MPI_CONFIG_PAGETYPE_EXTENDED) 8190 page_type = pReq->ExtPageType; 8191 else 8192 page_type = pReq->Header.PageType; 8193 8194 /* 8195 * ignore invalid page messages for GET_NEXT_HANDLE 8196 */ 8197 form = le32_to_cpu(pReq->PageAddress); 8198 if (ioc_status == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) { 8199 if (page_type == MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE || 8200 page_type == MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER || 8201 page_type == MPI_CONFIG_EXTPAGETYPE_ENCLOSURE) { 8202 if ((form >> MPI_SAS_DEVICE_PGAD_FORM_SHIFT) == 8203 MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE) 8204 return; 8205 } 8206 if (page_type == MPI_CONFIG_PAGETYPE_FC_DEVICE) 8207 if ((form & MPI_FC_DEVICE_PGAD_FORM_MASK) == 8208 MPI_FC_DEVICE_PGAD_FORM_NEXT_DID) 8209 return; 8210 } 8211 8212 snprintf(extend_desc, EVENT_DESCR_STR_SZ, 8213 "type=%02Xh, page=%02Xh, action=%02Xh, form=%08Xh", 8214 page_type, pReq->Header.PageNumber, pReq->Action, form); 8215 8216 switch (ioc_status) { 8217 8218 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */ 8219 desc = "Config Page Invalid Action"; 8220 break; 8221 8222 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */ 8223 desc = "Config Page Invalid Type"; 8224 break; 8225 8226 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */ 8227 desc = "Config Page Invalid Page"; 8228 break; 8229 8230 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */ 8231 desc = "Config Page Invalid Data"; 8232 break; 8233 8234 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */ 8235 desc = "Config Page No Defaults"; 8236 break; 8237 8238 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */ 8239 desc = "Config Page Can't Commit"; 8240 break; 8241 } 8242 8243 if (!desc) 8244 return; 8245 8246 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s: %s\n", 8247 ioc->name, ioc_status, desc, extend_desc)); 8248 } 8249 8250 /** 8251 * mpt_iocstatus_info - IOCSTATUS information returned from IOC. 8252 * @ioc: Pointer to MPT_ADAPTER structure 8253 * @ioc_status: U32 IOCStatus word from IOC 8254 * @mf: Pointer to MPT request frame 8255 * 8256 * Refer to lsi/mpi.h. 8257 **/ 8258 static void 8259 mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf) 8260 { 8261 u32 status = ioc_status & MPI_IOCSTATUS_MASK; 8262 char *desc = NULL; 8263 8264 switch (status) { 8265 8266 /****************************************************************************/ 8267 /* Common IOCStatus values for all replies */ 8268 /****************************************************************************/ 8269 8270 case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */ 8271 desc = "Invalid Function"; 8272 break; 8273 8274 case MPI_IOCSTATUS_BUSY: /* 0x0002 */ 8275 desc = "Busy"; 8276 break; 8277 8278 case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */ 8279 desc = "Invalid SGL"; 8280 break; 8281 8282 case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */ 8283 desc = "Internal Error"; 8284 break; 8285 8286 case MPI_IOCSTATUS_RESERVED: /* 0x0005 */ 8287 desc = "Reserved"; 8288 break; 8289 8290 case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */ 8291 desc = "Insufficient Resources"; 8292 break; 8293 8294 case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */ 8295 desc = "Invalid Field"; 8296 break; 8297 8298 case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */ 8299 desc = "Invalid State"; 8300 break; 8301 8302 /****************************************************************************/ 8303 /* Config IOCStatus values */ 8304 /****************************************************************************/ 8305 8306 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */ 8307 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */ 8308 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */ 8309 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */ 8310 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */ 8311 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */ 8312 mpt_iocstatus_info_config(ioc, status, mf); 8313 break; 8314 8315 /****************************************************************************/ 8316 /* SCSIIO Reply (SPI, FCP, SAS) initiator values */ 8317 /* */ 8318 /* Look at mptscsih_iocstatus_info_scsiio in mptscsih.c */ 8319 /* */ 8320 /****************************************************************************/ 8321 8322 case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */ 8323 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */ 8324 case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */ 8325 case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */ 8326 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */ 8327 case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */ 8328 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */ 8329 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */ 8330 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */ 8331 case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */ 8332 case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */ 8333 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */ 8334 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */ 8335 break; 8336 8337 /****************************************************************************/ 8338 /* SCSI Target values */ 8339 /****************************************************************************/ 8340 8341 case MPI_IOCSTATUS_TARGET_PRIORITY_IO: /* 0x0060 */ 8342 desc = "Target: Priority IO"; 8343 break; 8344 8345 case MPI_IOCSTATUS_TARGET_INVALID_PORT: /* 0x0061 */ 8346 desc = "Target: Invalid Port"; 8347 break; 8348 8349 case MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX: /* 0x0062 */ 8350 desc = "Target Invalid IO Index:"; 8351 break; 8352 8353 case MPI_IOCSTATUS_TARGET_ABORTED: /* 0x0063 */ 8354 desc = "Target: Aborted"; 8355 break; 8356 8357 case MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: /* 0x0064 */ 8358 desc = "Target: No Conn Retryable"; 8359 break; 8360 8361 case MPI_IOCSTATUS_TARGET_NO_CONNECTION: /* 0x0065 */ 8362 desc = "Target: No Connection"; 8363 break; 8364 8365 case MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: /* 0x006A */ 8366 desc = "Target: Transfer Count Mismatch"; 8367 break; 8368 8369 case MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT: /* 0x006B */ 8370 desc = "Target: STS Data not Sent"; 8371 break; 8372 8373 case MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: /* 0x006D */ 8374 desc = "Target: Data Offset Error"; 8375 break; 8376 8377 case MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: /* 0x006E */ 8378 desc = "Target: Too Much Write Data"; 8379 break; 8380 8381 case MPI_IOCSTATUS_TARGET_IU_TOO_SHORT: /* 0x006F */ 8382 desc = "Target: IU Too Short"; 8383 break; 8384 8385 case MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: /* 0x0070 */ 8386 desc = "Target: ACK NAK Timeout"; 8387 break; 8388 8389 case MPI_IOCSTATUS_TARGET_NAK_RECEIVED: /* 0x0071 */ 8390 desc = "Target: Nak Received"; 8391 break; 8392 8393 /****************************************************************************/ 8394 /* Fibre Channel Direct Access values */ 8395 /****************************************************************************/ 8396 8397 case MPI_IOCSTATUS_FC_ABORTED: /* 0x0066 */ 8398 desc = "FC: Aborted"; 8399 break; 8400 8401 case MPI_IOCSTATUS_FC_RX_ID_INVALID: /* 0x0067 */ 8402 desc = "FC: RX ID Invalid"; 8403 break; 8404 8405 case MPI_IOCSTATUS_FC_DID_INVALID: /* 0x0068 */ 8406 desc = "FC: DID Invalid"; 8407 break; 8408 8409 case MPI_IOCSTATUS_FC_NODE_LOGGED_OUT: /* 0x0069 */ 8410 desc = "FC: Node Logged Out"; 8411 break; 8412 8413 case MPI_IOCSTATUS_FC_EXCHANGE_CANCELED: /* 0x006C */ 8414 desc = "FC: Exchange Canceled"; 8415 break; 8416 8417 /****************************************************************************/ 8418 /* LAN values */ 8419 /****************************************************************************/ 8420 8421 case MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND: /* 0x0080 */ 8422 desc = "LAN: Device not Found"; 8423 break; 8424 8425 case MPI_IOCSTATUS_LAN_DEVICE_FAILURE: /* 0x0081 */ 8426 desc = "LAN: Device Failure"; 8427 break; 8428 8429 case MPI_IOCSTATUS_LAN_TRANSMIT_ERROR: /* 0x0082 */ 8430 desc = "LAN: Transmit Error"; 8431 break; 8432 8433 case MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED: /* 0x0083 */ 8434 desc = "LAN: Transmit Aborted"; 8435 break; 8436 8437 case MPI_IOCSTATUS_LAN_RECEIVE_ERROR: /* 0x0084 */ 8438 desc = "LAN: Receive Error"; 8439 break; 8440 8441 case MPI_IOCSTATUS_LAN_RECEIVE_ABORTED: /* 0x0085 */ 8442 desc = "LAN: Receive Aborted"; 8443 break; 8444 8445 case MPI_IOCSTATUS_LAN_PARTIAL_PACKET: /* 0x0086 */ 8446 desc = "LAN: Partial Packet"; 8447 break; 8448 8449 case MPI_IOCSTATUS_LAN_CANCELED: /* 0x0087 */ 8450 desc = "LAN: Canceled"; 8451 break; 8452 8453 /****************************************************************************/ 8454 /* Serial Attached SCSI values */ 8455 /****************************************************************************/ 8456 8457 case MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED: /* 0x0090 */ 8458 desc = "SAS: SMP Request Failed"; 8459 break; 8460 8461 case MPI_IOCSTATUS_SAS_SMP_DATA_OVERRUN: /* 0x0090 */ 8462 desc = "SAS: SMP Data Overrun"; 8463 break; 8464 8465 default: 8466 desc = "Others"; 8467 break; 8468 } 8469 8470 if (!desc) 8471 return; 8472 8473 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s\n", 8474 ioc->name, status, desc)); 8475 } 8476 8477 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 8478 EXPORT_SYMBOL(mpt_attach); 8479 EXPORT_SYMBOL(mpt_detach); 8480 #ifdef CONFIG_PM 8481 EXPORT_SYMBOL(mpt_resume); 8482 EXPORT_SYMBOL(mpt_suspend); 8483 #endif 8484 EXPORT_SYMBOL(ioc_list); 8485 EXPORT_SYMBOL(mpt_register); 8486 EXPORT_SYMBOL(mpt_deregister); 8487 EXPORT_SYMBOL(mpt_event_register); 8488 EXPORT_SYMBOL(mpt_event_deregister); 8489 EXPORT_SYMBOL(mpt_reset_register); 8490 EXPORT_SYMBOL(mpt_reset_deregister); 8491 EXPORT_SYMBOL(mpt_device_driver_register); 8492 EXPORT_SYMBOL(mpt_device_driver_deregister); 8493 EXPORT_SYMBOL(mpt_get_msg_frame); 8494 EXPORT_SYMBOL(mpt_put_msg_frame); 8495 EXPORT_SYMBOL(mpt_put_msg_frame_hi_pri); 8496 EXPORT_SYMBOL(mpt_free_msg_frame); 8497 EXPORT_SYMBOL(mpt_send_handshake_request); 8498 EXPORT_SYMBOL(mpt_verify_adapter); 8499 EXPORT_SYMBOL(mpt_GetIocState); 8500 EXPORT_SYMBOL(mpt_print_ioc_summary); 8501 EXPORT_SYMBOL(mpt_HardResetHandler); 8502 EXPORT_SYMBOL(mpt_config); 8503 EXPORT_SYMBOL(mpt_findImVolumes); 8504 EXPORT_SYMBOL(mpt_alloc_fw_memory); 8505 EXPORT_SYMBOL(mpt_free_fw_memory); 8506 EXPORT_SYMBOL(mptbase_sas_persist_operation); 8507 EXPORT_SYMBOL(mpt_raid_phys_disk_pg0); 8508 8509 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 8510 /** 8511 * fusion_init - Fusion MPT base driver initialization routine. 8512 * 8513 * Returns 0 for success, non-zero for failure. 8514 */ 8515 static int __init 8516 fusion_init(void) 8517 { 8518 u8 cb_idx; 8519 8520 show_mptmod_ver(my_NAME, my_VERSION); 8521 printk(KERN_INFO COPYRIGHT "\n"); 8522 8523 for (cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) { 8524 MptCallbacks[cb_idx] = NULL; 8525 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER; 8526 MptEvHandlers[cb_idx] = NULL; 8527 MptResetHandlers[cb_idx] = NULL; 8528 } 8529 8530 /* Register ourselves (mptbase) in order to facilitate 8531 * EventNotification handling. 8532 */ 8533 mpt_base_index = mpt_register(mptbase_reply, MPTBASE_DRIVER, 8534 "mptbase_reply"); 8535 8536 /* Register for hard reset handling callbacks. 8537 */ 8538 mpt_reset_register(mpt_base_index, mpt_ioc_reset); 8539 8540 #ifdef CONFIG_PROC_FS 8541 (void) procmpt_create(); 8542 #endif 8543 return 0; 8544 } 8545 8546 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 8547 /** 8548 * fusion_exit - Perform driver unload cleanup. 8549 * 8550 * This routine frees all resources associated with each MPT adapter 8551 * and removes all %MPT_PROCFS_MPTBASEDIR entries. 8552 */ 8553 static void __exit 8554 fusion_exit(void) 8555 { 8556 8557 mpt_reset_deregister(mpt_base_index); 8558 8559 #ifdef CONFIG_PROC_FS 8560 procmpt_destroy(); 8561 #endif 8562 } 8563 8564 module_init(fusion_init); 8565 module_exit(fusion_exit); 8566