1 /* 2 * Copyright (c) 2004-2008 LSI Corporation. 3 * 4 * 5 * Name: mpi_sas.h 6 * Title: MPI Serial Attached SCSI structures and definitions 7 * Creation Date: August 19, 2004 8 * 9 * mpi_sas.h Version: 01.05.05 10 * 11 * Version History 12 * --------------- 13 * 14 * Date Version Description 15 * -------- -------- ------------------------------------------------------ 16 * 08-19-04 01.05.01 Original release. 17 * 08-30-05 01.05.02 Added DeviceInfo bit for SEP. 18 * Added PrimFlags and Primitive field to SAS IO Unit 19 * Control request, and added a new operation code. 20 * 03-27-06 01.05.03 Added Force Full Discovery, Transmit Port Select Signal, 21 * and Remove Device operations to SAS IO Unit Control. 22 * Added DevHandle field to SAS IO Unit Control request and 23 * reply. 24 * 10-11-06 01.05.04 Fixed the name of a define for Operation field of SAS IO 25 * Unit Control request. 26 * 01-15-08 01.05.05 Added support for MPI_SAS_OP_SET_IOC_PARAMETER, 27 * including adding IOCParameter and IOCParameter value 28 * fields to SAS IO Unit Control Request. 29 * Added MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC define. 30 * -------------------------------------------------------------------------- 31 */ 32 33 #ifndef MPI_SAS_H 34 #define MPI_SAS_H 35 36 37 /* 38 * Values for SASStatus. 39 */ 40 #define MPI_SASSTATUS_SUCCESS (0x00) 41 #define MPI_SASSTATUS_UNKNOWN_ERROR (0x01) 42 #define MPI_SASSTATUS_INVALID_FRAME (0x02) 43 #define MPI_SASSTATUS_UTC_BAD_DEST (0x03) 44 #define MPI_SASSTATUS_UTC_BREAK_RECEIVED (0x04) 45 #define MPI_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05) 46 #define MPI_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06) 47 #define MPI_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07) 48 #define MPI_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08) 49 #define MPI_SASSTATUS_UTC_WRONG_DESTINATION (0x09) 50 #define MPI_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A) 51 #define MPI_SASSTATUS_LONG_INFORMATION_UNIT (0x0B) 52 #define MPI_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C) 53 #define MPI_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D) 54 #define MPI_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E) 55 #define MPI_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F) 56 #define MPI_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10) 57 #define MPI_SASSTATUS_DATA_OFFSET_ERROR (0x11) 58 #define MPI_SASSTATUS_SDSF_NAK_RECEIVED (0x12) 59 #define MPI_SASSTATUS_SDSF_CONNECTION_FAILED (0x13) 60 #define MPI_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14) 61 62 63 /* 64 * Values for the SAS DeviceInfo field used in SAS Device Status Change Event 65 * data and SAS IO Unit Configuration pages. 66 */ 67 #define MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC (0xF0000000) 68 69 #define MPI_SAS_DEVICE_INFO_SEP (0x00004000) 70 #define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000) 71 #define MPI_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000) 72 #define MPI_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800) 73 #define MPI_SAS_DEVICE_INFO_SSP_TARGET (0x00000400) 74 #define MPI_SAS_DEVICE_INFO_STP_TARGET (0x00000200) 75 #define MPI_SAS_DEVICE_INFO_SMP_TARGET (0x00000100) 76 #define MPI_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080) 77 #define MPI_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040) 78 #define MPI_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020) 79 #define MPI_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010) 80 #define MPI_SAS_DEVICE_INFO_SATA_HOST (0x00000008) 81 82 #define MPI_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007) 83 #define MPI_SAS_DEVICE_INFO_NO_DEVICE (0x00000000) 84 #define MPI_SAS_DEVICE_INFO_END_DEVICE (0x00000001) 85 #define MPI_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002) 86 #define MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003) 87 88 89 90 /***************************************************************************** 91 * 92 * S e r i a l A t t a c h e d S C S I M e s s a g e s 93 * 94 *****************************************************************************/ 95 96 /****************************************************************************/ 97 /* Serial Management Protocol Passthrough Request */ 98 /****************************************************************************/ 99 100 typedef struct _MSG_SMP_PASSTHROUGH_REQUEST 101 { 102 U8 PassthroughFlags; /* 00h */ 103 U8 PhysicalPort; /* 01h */ 104 U8 ChainOffset; /* 02h */ 105 U8 Function; /* 03h */ 106 U16 RequestDataLength; /* 04h */ 107 U8 ConnectionRate; /* 06h */ 108 U8 MsgFlags; /* 07h */ 109 U32 MsgContext; /* 08h */ 110 U32 Reserved1; /* 0Ch */ 111 U64 SASAddress; /* 10h */ 112 U32 Reserved2; /* 18h */ 113 U32 Reserved3; /* 1Ch */ 114 SGE_SIMPLE_UNION SGL; /* 20h */ 115 } MSG_SMP_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REQUEST, 116 SmpPassthroughRequest_t, MPI_POINTER pSmpPassthroughRequest_t; 117 118 /* values for PassthroughFlags field */ 119 #define MPI_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80) 120 121 /* values for ConnectionRate field */ 122 #define MPI_SMP_PT_REQ_CONNECT_RATE_NEGOTIATED (0x00) 123 #define MPI_SMP_PT_REQ_CONNECT_RATE_1_5 (0x08) 124 #define MPI_SMP_PT_REQ_CONNECT_RATE_3_0 (0x09) 125 126 127 /* Serial Management Protocol Passthrough Reply */ 128 typedef struct _MSG_SMP_PASSTHROUGH_REPLY 129 { 130 U8 PassthroughFlags; /* 00h */ 131 U8 PhysicalPort; /* 01h */ 132 U8 MsgLength; /* 02h */ 133 U8 Function; /* 03h */ 134 U16 ResponseDataLength; /* 04h */ 135 U8 Reserved1; /* 06h */ 136 U8 MsgFlags; /* 07h */ 137 U32 MsgContext; /* 08h */ 138 U8 Reserved2; /* 0Ch */ 139 U8 SASStatus; /* 0Dh */ 140 U16 IOCStatus; /* 0Eh */ 141 U32 IOCLogInfo; /* 10h */ 142 U32 Reserved3; /* 14h */ 143 U8 ResponseData[4]; /* 18h */ 144 } MSG_SMP_PASSTHROUGH_REPLY, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REPLY, 145 SmpPassthroughReply_t, MPI_POINTER pSmpPassthroughReply_t; 146 147 #define MPI_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE (0x80) 148 149 150 /****************************************************************************/ 151 /* SATA Passthrough Request */ 152 /****************************************************************************/ 153 154 typedef struct _MSG_SATA_PASSTHROUGH_REQUEST 155 { 156 U8 TargetID; /* 00h */ 157 U8 Bus; /* 01h */ 158 U8 ChainOffset; /* 02h */ 159 U8 Function; /* 03h */ 160 U16 PassthroughFlags; /* 04h */ 161 U8 ConnectionRate; /* 06h */ 162 U8 MsgFlags; /* 07h */ 163 U32 MsgContext; /* 08h */ 164 U32 Reserved1; /* 0Ch */ 165 U32 Reserved2; /* 10h */ 166 U32 Reserved3; /* 14h */ 167 U32 DataLength; /* 18h */ 168 U8 CommandFIS[20]; /* 1Ch */ 169 SGE_SIMPLE_UNION SGL; /* 30h */ 170 } MSG_SATA_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SATA_PASSTHROUGH_REQUEST, 171 SataPassthroughRequest_t, MPI_POINTER pSataPassthroughRequest_t; 172 173 /* values for PassthroughFlags field */ 174 #define MPI_SATA_PT_REQ_PT_FLAGS_RESET_DEVICE (0x0200) 175 #define MPI_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG (0x0100) 176 #define MPI_SATA_PT_REQ_PT_FLAGS_DMA_QUEUED (0x0080) 177 #define MPI_SATA_PT_REQ_PT_FLAGS_PACKET_COMMAND (0x0040) 178 #define MPI_SATA_PT_REQ_PT_FLAGS_DMA (0x0020) 179 #define MPI_SATA_PT_REQ_PT_FLAGS_PIO (0x0010) 180 #define MPI_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU (0x0004) 181 #define MPI_SATA_PT_REQ_PT_FLAGS_WRITE (0x0002) 182 #define MPI_SATA_PT_REQ_PT_FLAGS_READ (0x0001) 183 184 /* values for ConnectionRate field */ 185 #define MPI_SATA_PT_REQ_CONNECT_RATE_NEGOTIATED (0x00) 186 #define MPI_SATA_PT_REQ_CONNECT_RATE_1_5 (0x08) 187 #define MPI_SATA_PT_REQ_CONNECT_RATE_3_0 (0x09) 188 189 190 /* SATA Passthrough Reply */ 191 typedef struct _MSG_SATA_PASSTHROUGH_REPLY 192 { 193 U8 TargetID; /* 00h */ 194 U8 Bus; /* 01h */ 195 U8 MsgLength; /* 02h */ 196 U8 Function; /* 03h */ 197 U16 PassthroughFlags; /* 04h */ 198 U8 Reserved1; /* 06h */ 199 U8 MsgFlags; /* 07h */ 200 U32 MsgContext; /* 08h */ 201 U8 Reserved2; /* 0Ch */ 202 U8 SASStatus; /* 0Dh */ 203 U16 IOCStatus; /* 0Eh */ 204 U32 IOCLogInfo; /* 10h */ 205 U8 StatusFIS[20]; /* 14h */ 206 U32 StatusControlRegisters; /* 28h */ 207 U32 TransferCount; /* 2Ch */ 208 } MSG_SATA_PASSTHROUGH_REPLY, MPI_POINTER PTR_MSG_SATA_PASSTHROUGH_REPLY, 209 SataPassthroughReply_t, MPI_POINTER pSataPassthroughReply_t; 210 211 212 213 214 /****************************************************************************/ 215 /* SAS IO Unit Control Request */ 216 /****************************************************************************/ 217 218 typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST 219 { 220 U8 Operation; /* 00h */ 221 U8 Reserved1; /* 01h */ 222 U8 ChainOffset; /* 02h */ 223 U8 Function; /* 03h */ 224 U16 DevHandle; /* 04h */ 225 U8 IOCParameter; /* 06h */ 226 U8 MsgFlags; /* 07h */ 227 U32 MsgContext; /* 08h */ 228 U8 TargetID; /* 0Ch */ 229 U8 Bus; /* 0Dh */ 230 U8 PhyNum; /* 0Eh */ 231 U8 PrimFlags; /* 0Fh */ 232 U32 Primitive; /* 10h */ 233 U64 SASAddress; /* 14h */ 234 U32 IOCParameterValue; /* 1Ch */ 235 } MSG_SAS_IOUNIT_CONTROL_REQUEST, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REQUEST, 236 SasIoUnitControlRequest_t, MPI_POINTER pSasIoUnitControlRequest_t; 237 238 /* values for the Operation field */ 239 #define MPI_SAS_OP_CLEAR_NOT_PRESENT (0x01) 240 #define MPI_SAS_OP_CLEAR_ALL_PERSISTENT (0x02) 241 #define MPI_SAS_OP_PHY_LINK_RESET (0x06) 242 #define MPI_SAS_OP_PHY_HARD_RESET (0x07) 243 #define MPI_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08) 244 #define MPI_SAS_OP_MAP_CURRENT (0x09) 245 #define MPI_SAS_OP_SEND_PRIMITIVE (0x0A) 246 #define MPI_SAS_OP_FORCE_FULL_DISCOVERY (0x0B) 247 #define MPI_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C) 248 #define MPI_SAS_OP_TRANSMIT_REMOVE_DEVICE (0x0D) /* obsolete name */ 249 #define MPI_SAS_OP_REMOVE_DEVICE (0x0D) 250 #define MPI_SAS_OP_SET_IOC_PARAMETER (0x0E) 251 #define MPI_SAS_OP_PRODUCT_SPECIFIC_MIN (0x80) 252 253 /* values for the PrimFlags field */ 254 #define MPI_SAS_PRIMFLAGS_SINGLE (0x08) 255 #define MPI_SAS_PRIMFLAGS_TRIPLE (0x02) 256 #define MPI_SAS_PRIMFLAGS_REDUNDANT (0x01) 257 258 259 /* SAS IO Unit Control Reply */ 260 typedef struct _MSG_SAS_IOUNIT_CONTROL_REPLY 261 { 262 U8 Operation; /* 00h */ 263 U8 Reserved1; /* 01h */ 264 U8 MsgLength; /* 02h */ 265 U8 Function; /* 03h */ 266 U16 DevHandle; /* 04h */ 267 U8 IOCParameter; /* 06h */ 268 U8 MsgFlags; /* 07h */ 269 U32 MsgContext; /* 08h */ 270 U16 Reserved4; /* 0Ch */ 271 U16 IOCStatus; /* 0Eh */ 272 U32 IOCLogInfo; /* 10h */ 273 } MSG_SAS_IOUNIT_CONTROL_REPLY, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REPLY, 274 SasIoUnitControlReply_t, MPI_POINTER pSasIoUnitControlReply_t; 275 276 #endif 277 278 279