1 2menu "Fusion MPT device support" 3 depends on PCI 4 5config FUSION 6 bool 7 default n 8 9config FUSION_SPI 10 tristate "Fusion MPT ScsiHost drivers for SPI" 11 depends on PCI && SCSI 12 select FUSION 13 select SCSI_SPI_ATTRS 14 ---help--- 15 SCSI HOST support for a parallel SCSI host adapters. 16 17 List of supported controllers: 18 19 LSI53C1020 20 LSI53C1020A 21 LSI53C1030 22 LSI53C1035 23 24config FUSION_FC 25 tristate "Fusion MPT ScsiHost drivers for FC" 26 depends on PCI && SCSI 27 select FUSION 28 select SCSI_FC_ATTRS 29 ---help--- 30 SCSI HOST support for a Fiber Channel host adapters. 31 32 List of supported controllers: 33 34 LSIFC909 35 LSIFC919 36 LSIFC919X 37 LSIFC929 38 LSIFC929X 39 LSIFC929XL 40 41config FUSION_SAS 42 tristate "Fusion MPT ScsiHost drivers for SAS" 43 depends on PCI && SCSI 44 select FUSION 45 select SCSI_SAS_ATTRS 46 ---help--- 47 SCSI HOST support for a SAS host adapters. 48 49 List of supported controllers: 50 51 LSISAS1064 52 LSISAS1068 53 LSISAS1064E 54 LSISAS1068E 55 56config FUSION_MAX_SGE 57 int "Maximum number of scatter gather entries (16 - 128)" 58 depends on FUSION 59 default "128" 60 range 16 128 61 help 62 This option allows you to specify the maximum number of scatter- 63 gather entries per I/O. The driver default is 128, which matches 64 SCSI_MAX_PHYS_SEGMENTS. However, it may decreased down to 16. 65 Decreasing this parameter will reduce memory requirements 66 on a per controller instance. 67 68config FUSION_CTL 69 tristate "Fusion MPT misc device (ioctl) driver" 70 depends on FUSION_SPI || FUSION_FC || FUSION_SAS 71 ---help--- 72 The Fusion MPT misc device driver provides specialized control 73 of MPT adapters via system ioctl calls. Use of ioctl calls to 74 the MPT driver requires that you create and use a misc device 75 node ala: 76 mknod /dev/mptctl c 10 240 77 78 One use of this ioctl interface is to perform an upgrade (reflash) 79 of the MPT adapter firmware. Refer to readme file(s) distributed 80 with the Fusion MPT linux driver for additional details. 81 82 If enabled by saying M to this, a driver named: mptctl 83 will be compiled. 84 85 If unsure whether you really want or need this, say N. 86 87config FUSION_LAN 88 tristate "Fusion MPT LAN driver" 89 depends on FUSION_FC && NET_FC 90 ---help--- 91 This module supports LAN IP traffic over Fibre Channel port(s) 92 on Fusion MPT compatible hardware (LSIFC9xx chips). 93 The physical interface used is defined in RFC 2625. 94 Please refer to that document for details. 95 96 Installing this driver requires the knowledge to configure and 97 activate a new network interface, "fc0", using standard Linux tools. 98 99 If enabled by saying M to this, a driver named: mptlan 100 will be compiled. 101 102 If unsure whether you really want or need this, say N. 103 104endmenu 105