1 2menu "Fusion MPT device support" 3 4config FUSION 5 bool 6 default n 7 8config FUSION_SPI 9 tristate "Fusion MPT ScsiHost drivers for SPI" 10 depends on PCI && SCSI 11 select FUSION 12 select SCSI_SPI_ATTRS 13 ---help--- 14 SCSI HOST support for a parallel SCSI host adapters. 15 16 List of supported controllers: 17 18 LSI53C1020 19 LSI53C1020A 20 LSI53C1030 21 LSI53C1035 22 23config FUSION_FC 24 tristate "Fusion MPT ScsiHost drivers for FC" 25 depends on PCI && SCSI 26 select FUSION 27 select SCSI_FC_ATTRS 28 ---help--- 29 SCSI HOST support for a Fiber Channel host adapters. 30 31 List of supported controllers: 32 33 LSIFC909 34 LSIFC919 35 LSIFC919X 36 LSIFC929 37 LSIFC929X 38 LSIFC929XL 39 40config FUSION_SAS 41 tristate "Fusion MPT ScsiHost drivers for SAS" 42 depends on PCI && SCSI 43 select FUSION 44 select SCSI_SAS_ATTRS 45 ---help--- 46 SCSI HOST support for a SAS host adapters. 47 48 List of supported controllers: 49 50 LSISAS1064 51 LSISAS1066 52 LSISAS1068 53 LSISAS1064E 54 LSISAS1066E 55 LSISAS1068E 56 57config FUSION_MAX_SGE 58 int "Maximum number of scatter gather entries (16 - 128)" 59 depends on FUSION 60 default "128" 61 range 16 128 62 help 63 This option allows you to specify the maximum number of scatter- 64 gather entries per I/O. The driver default is 128, which matches 65 SCSI_MAX_PHYS_SEGMENTS. However, it may decreased down to 16. 66 Decreasing this parameter will reduce memory requirements 67 on a per controller instance. 68 69config FUSION_CTL 70 tristate "Fusion MPT misc device (ioctl) driver" 71 depends on FUSION_SPI || FUSION_FC 72 ---help--- 73 The Fusion MPT misc device driver provides specialized control 74 of MPT adapters via system ioctl calls. Use of ioctl calls to 75 the MPT driver requires that you create and use a misc device 76 node ala: 77 mknod /dev/mptctl c 10 240 78 79 One use of this ioctl interface is to perform an upgrade (reflash) 80 of the MPT adapter firmware. Refer to readme file(s) distributed 81 with the Fusion MPT linux driver for additional details. 82 83 If enabled by saying M to this, a driver named: mptctl 84 will be compiled. 85 86 If unsure whether you really want or need this, say N. 87 88config FUSION_LAN 89 tristate "Fusion MPT LAN driver" 90 depends on FUSION_FC && NET_FC 91 ---help--- 92 This module supports LAN IP traffic over Fibre Channel port(s) 93 on Fusion MPT compatible hardware (LSIFC9xx chips). 94 The physical interface used is defined in RFC 2625. 95 Please refer to that document for details. 96 97 Installing this driver requires the knowledge to configure and 98 activate a new network interface, "fc0", using standard Linux tools. 99 100 If enabled by saying M to this, a driver named: mptlan 101 will be compiled. 102 103 If unsure whether you really want or need this, say N. 104 105endmenu 106