xref: /openbmc/linux/drivers/memory/atmel-ebi.c (revision 151f4e2b)
1 /*
2  * EBI driver for Atmel chips
3  * inspired by the fsl weim bus driver
4  *
5  * Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com>
6  *
7  * This file is licensed under the terms of the GNU General Public
8  * License version 2. This program is licensed "as is" without any
9  * warranty of any kind, whether express or implied.
10  */
11 
12 #include <linux/clk.h>
13 #include <linux/io.h>
14 #include <linux/mfd/syscon.h>
15 #include <linux/mfd/syscon/atmel-matrix.h>
16 #include <linux/mfd/syscon/atmel-smc.h>
17 #include <linux/init.h>
18 #include <linux/of_device.h>
19 #include <linux/regmap.h>
20 #include <soc/at91/atmel-sfr.h>
21 
22 struct atmel_ebi_dev_config {
23 	int cs;
24 	struct atmel_smc_cs_conf smcconf;
25 };
26 
27 struct atmel_ebi;
28 
29 struct atmel_ebi_dev {
30 	struct list_head node;
31 	struct atmel_ebi *ebi;
32 	u32 mode;
33 	int numcs;
34 	struct atmel_ebi_dev_config configs[];
35 };
36 
37 struct atmel_ebi_caps {
38 	unsigned int available_cs;
39 	unsigned int ebi_csa_offs;
40 	const char *regmap_name;
41 	void (*get_config)(struct atmel_ebi_dev *ebid,
42 			   struct atmel_ebi_dev_config *conf);
43 	int (*xlate_config)(struct atmel_ebi_dev *ebid,
44 			    struct device_node *configs_np,
45 			    struct atmel_ebi_dev_config *conf);
46 	void (*apply_config)(struct atmel_ebi_dev *ebid,
47 			     struct atmel_ebi_dev_config *conf);
48 };
49 
50 struct atmel_ebi {
51 	struct clk *clk;
52 	struct regmap *regmap;
53 	struct  {
54 		struct regmap *regmap;
55 		struct clk *clk;
56 		const struct atmel_hsmc_reg_layout *layout;
57 	} smc;
58 
59 	struct device *dev;
60 	const struct atmel_ebi_caps *caps;
61 	struct list_head devs;
62 };
63 
64 struct atmel_smc_timing_xlate {
65 	const char *name;
66 	int (*converter)(struct atmel_smc_cs_conf *conf,
67 			 unsigned int shift, unsigned int nycles);
68 	unsigned int shift;
69 };
70 
71 #define ATMEL_SMC_SETUP_XLATE(nm, pos)	\
72 	{ .name = nm, .converter = atmel_smc_cs_conf_set_setup, .shift = pos}
73 
74 #define ATMEL_SMC_PULSE_XLATE(nm, pos)	\
75 	{ .name = nm, .converter = atmel_smc_cs_conf_set_pulse, .shift = pos}
76 
77 #define ATMEL_SMC_CYCLE_XLATE(nm, pos)	\
78 	{ .name = nm, .converter = atmel_smc_cs_conf_set_cycle, .shift = pos}
79 
80 static void at91sam9_ebi_get_config(struct atmel_ebi_dev *ebid,
81 				    struct atmel_ebi_dev_config *conf)
82 {
83 	atmel_smc_cs_conf_get(ebid->ebi->smc.regmap, conf->cs,
84 			      &conf->smcconf);
85 }
86 
87 static void sama5_ebi_get_config(struct atmel_ebi_dev *ebid,
88 				 struct atmel_ebi_dev_config *conf)
89 {
90 	atmel_hsmc_cs_conf_get(ebid->ebi->smc.regmap, ebid->ebi->smc.layout,
91 			       conf->cs, &conf->smcconf);
92 }
93 
94 static const struct atmel_smc_timing_xlate timings_xlate_table[] = {
95 	ATMEL_SMC_SETUP_XLATE("atmel,smc-ncs-rd-setup-ns",
96 			      ATMEL_SMC_NCS_RD_SHIFT),
97 	ATMEL_SMC_SETUP_XLATE("atmel,smc-ncs-wr-setup-ns",
98 			      ATMEL_SMC_NCS_WR_SHIFT),
99 	ATMEL_SMC_SETUP_XLATE("atmel,smc-nrd-setup-ns", ATMEL_SMC_NRD_SHIFT),
100 	ATMEL_SMC_SETUP_XLATE("atmel,smc-nwe-setup-ns", ATMEL_SMC_NWE_SHIFT),
101 	ATMEL_SMC_PULSE_XLATE("atmel,smc-ncs-rd-pulse-ns",
102 			      ATMEL_SMC_NCS_RD_SHIFT),
103 	ATMEL_SMC_PULSE_XLATE("atmel,smc-ncs-wr-pulse-ns",
104 			      ATMEL_SMC_NCS_WR_SHIFT),
105 	ATMEL_SMC_PULSE_XLATE("atmel,smc-nrd-pulse-ns", ATMEL_SMC_NRD_SHIFT),
106 	ATMEL_SMC_PULSE_XLATE("atmel,smc-nwe-pulse-ns", ATMEL_SMC_NWE_SHIFT),
107 	ATMEL_SMC_CYCLE_XLATE("atmel,smc-nrd-cycle-ns", ATMEL_SMC_NRD_SHIFT),
108 	ATMEL_SMC_CYCLE_XLATE("atmel,smc-nwe-cycle-ns", ATMEL_SMC_NWE_SHIFT),
109 };
110 
111 static int atmel_ebi_xslate_smc_timings(struct atmel_ebi_dev *ebid,
112 					struct device_node *np,
113 					struct atmel_smc_cs_conf *smcconf)
114 {
115 	unsigned int clk_rate = clk_get_rate(ebid->ebi->clk);
116 	unsigned int clk_period_ns = NSEC_PER_SEC / clk_rate;
117 	bool required = false;
118 	unsigned int ncycles;
119 	int ret, i;
120 	u32 val;
121 
122 	ret = of_property_read_u32(np, "atmel,smc-tdf-ns", &val);
123 	if (!ret) {
124 		required = true;
125 		ncycles = DIV_ROUND_UP(val, clk_period_ns);
126 		if (ncycles > ATMEL_SMC_MODE_TDF_MAX) {
127 			ret = -EINVAL;
128 			goto out;
129 		}
130 
131 		if (ncycles < ATMEL_SMC_MODE_TDF_MIN)
132 			ncycles = ATMEL_SMC_MODE_TDF_MIN;
133 
134 		smcconf->mode |= ATMEL_SMC_MODE_TDF(ncycles);
135 	}
136 
137 	for (i = 0; i < ARRAY_SIZE(timings_xlate_table); i++) {
138 		const struct atmel_smc_timing_xlate *xlate;
139 
140 		xlate = &timings_xlate_table[i];
141 
142 		ret = of_property_read_u32(np, xlate->name, &val);
143 		if (ret) {
144 			if (!required)
145 				continue;
146 			else
147 				break;
148 		}
149 
150 		if (!required) {
151 			ret = -EINVAL;
152 			break;
153 		}
154 
155 		ncycles = DIV_ROUND_UP(val, clk_period_ns);
156 		ret = xlate->converter(smcconf, xlate->shift, ncycles);
157 		if (ret)
158 			goto out;
159 	}
160 
161 out:
162 	if (ret) {
163 		dev_err(ebid->ebi->dev,
164 			"missing or invalid timings definition in %pOF",
165 			np);
166 		return ret;
167 	}
168 
169 	return required;
170 }
171 
172 static int atmel_ebi_xslate_smc_config(struct atmel_ebi_dev *ebid,
173 				       struct device_node *np,
174 				       struct atmel_ebi_dev_config *conf)
175 {
176 	struct atmel_smc_cs_conf *smcconf = &conf->smcconf;
177 	bool required = false;
178 	const char *tmp_str;
179 	u32 tmp;
180 	int ret;
181 
182 	ret = of_property_read_u32(np, "atmel,smc-bus-width", &tmp);
183 	if (!ret) {
184 		switch (tmp) {
185 		case 8:
186 			smcconf->mode |= ATMEL_SMC_MODE_DBW_8;
187 			break;
188 
189 		case 16:
190 			smcconf->mode |= ATMEL_SMC_MODE_DBW_16;
191 			break;
192 
193 		case 32:
194 			smcconf->mode |= ATMEL_SMC_MODE_DBW_32;
195 			break;
196 
197 		default:
198 			return -EINVAL;
199 		}
200 
201 		required = true;
202 	}
203 
204 	if (of_property_read_bool(np, "atmel,smc-tdf-optimized")) {
205 		smcconf->mode |= ATMEL_SMC_MODE_TDFMODE_OPTIMIZED;
206 		required = true;
207 	}
208 
209 	tmp_str = NULL;
210 	of_property_read_string(np, "atmel,smc-byte-access-type", &tmp_str);
211 	if (tmp_str && !strcmp(tmp_str, "write")) {
212 		smcconf->mode |= ATMEL_SMC_MODE_BAT_WRITE;
213 		required = true;
214 	}
215 
216 	tmp_str = NULL;
217 	of_property_read_string(np, "atmel,smc-read-mode", &tmp_str);
218 	if (tmp_str && !strcmp(tmp_str, "nrd")) {
219 		smcconf->mode |= ATMEL_SMC_MODE_READMODE_NRD;
220 		required = true;
221 	}
222 
223 	tmp_str = NULL;
224 	of_property_read_string(np, "atmel,smc-write-mode", &tmp_str);
225 	if (tmp_str && !strcmp(tmp_str, "nwe")) {
226 		smcconf->mode |= ATMEL_SMC_MODE_WRITEMODE_NWE;
227 		required = true;
228 	}
229 
230 	tmp_str = NULL;
231 	of_property_read_string(np, "atmel,smc-exnw-mode", &tmp_str);
232 	if (tmp_str) {
233 		if (!strcmp(tmp_str, "frozen"))
234 			smcconf->mode |= ATMEL_SMC_MODE_EXNWMODE_FROZEN;
235 		else if (!strcmp(tmp_str, "ready"))
236 			smcconf->mode |= ATMEL_SMC_MODE_EXNWMODE_READY;
237 		else if (strcmp(tmp_str, "disabled"))
238 			return -EINVAL;
239 
240 		required = true;
241 	}
242 
243 	ret = of_property_read_u32(np, "atmel,smc-page-mode", &tmp);
244 	if (!ret) {
245 		switch (tmp) {
246 		case 4:
247 			smcconf->mode |= ATMEL_SMC_MODE_PS_4;
248 			break;
249 
250 		case 8:
251 			smcconf->mode |= ATMEL_SMC_MODE_PS_8;
252 			break;
253 
254 		case 16:
255 			smcconf->mode |= ATMEL_SMC_MODE_PS_16;
256 			break;
257 
258 		case 32:
259 			smcconf->mode |= ATMEL_SMC_MODE_PS_32;
260 			break;
261 
262 		default:
263 			return -EINVAL;
264 		}
265 
266 		smcconf->mode |= ATMEL_SMC_MODE_PMEN;
267 		required = true;
268 	}
269 
270 	ret = atmel_ebi_xslate_smc_timings(ebid, np, &conf->smcconf);
271 	if (ret < 0)
272 		return -EINVAL;
273 
274 	if ((ret > 0 && !required) || (!ret && required)) {
275 		dev_err(ebid->ebi->dev, "missing atmel,smc- properties in %pOF",
276 			np);
277 		return -EINVAL;
278 	}
279 
280 	return required;
281 }
282 
283 static void at91sam9_ebi_apply_config(struct atmel_ebi_dev *ebid,
284 				      struct atmel_ebi_dev_config *conf)
285 {
286 	atmel_smc_cs_conf_apply(ebid->ebi->smc.regmap, conf->cs,
287 				&conf->smcconf);
288 }
289 
290 static void sama5_ebi_apply_config(struct atmel_ebi_dev *ebid,
291 				   struct atmel_ebi_dev_config *conf)
292 {
293 	atmel_hsmc_cs_conf_apply(ebid->ebi->smc.regmap, ebid->ebi->smc.layout,
294 				 conf->cs, &conf->smcconf);
295 }
296 
297 static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np,
298 			       int reg_cells)
299 {
300 	const struct atmel_ebi_caps *caps = ebi->caps;
301 	struct atmel_ebi_dev_config conf = { };
302 	struct device *dev = ebi->dev;
303 	struct atmel_ebi_dev *ebid;
304 	unsigned long cslines = 0;
305 	int ret, numcs = 0, nentries, i;
306 	bool apply = false;
307 	u32 cs;
308 
309 	nentries = of_property_count_elems_of_size(np, "reg",
310 						   reg_cells * sizeof(u32));
311 	for (i = 0; i < nentries; i++) {
312 		ret = of_property_read_u32_index(np, "reg", i * reg_cells,
313 						 &cs);
314 		if (ret)
315 			return ret;
316 
317 		if (cs >= AT91_MATRIX_EBI_NUM_CS ||
318 		    !(ebi->caps->available_cs & BIT(cs))) {
319 			dev_err(dev, "invalid reg property in %pOF\n", np);
320 			return -EINVAL;
321 		}
322 
323 		if (!test_and_set_bit(cs, &cslines))
324 			numcs++;
325 	}
326 
327 	if (!numcs) {
328 		dev_err(dev, "invalid reg property in %pOF\n", np);
329 		return -EINVAL;
330 	}
331 
332 	ebid = devm_kzalloc(ebi->dev, struct_size(ebid, configs, numcs),
333 			    GFP_KERNEL);
334 	if (!ebid)
335 		return -ENOMEM;
336 
337 	ebid->ebi = ebi;
338 	ebid->numcs = numcs;
339 
340 	ret = caps->xlate_config(ebid, np, &conf);
341 	if (ret < 0)
342 		return ret;
343 	else if (ret)
344 		apply = true;
345 
346 	i = 0;
347 	for_each_set_bit(cs, &cslines, AT91_MATRIX_EBI_NUM_CS) {
348 		ebid->configs[i].cs = cs;
349 
350 		if (apply) {
351 			conf.cs = cs;
352 			caps->apply_config(ebid, &conf);
353 		}
354 
355 		caps->get_config(ebid, &ebid->configs[i]);
356 
357 		/*
358 		 * Attach the EBI device to the generic SMC logic if at least
359 		 * one "atmel,smc-" property is present.
360 		 */
361 		if (ebi->caps->ebi_csa_offs && apply)
362 			regmap_update_bits(ebi->regmap,
363 					   ebi->caps->ebi_csa_offs,
364 					   BIT(cs), 0);
365 
366 		i++;
367 	}
368 
369 	list_add_tail(&ebid->node, &ebi->devs);
370 
371 	return 0;
372 }
373 
374 static const struct atmel_ebi_caps at91sam9260_ebi_caps = {
375 	.available_cs = 0xff,
376 	.ebi_csa_offs = AT91SAM9260_MATRIX_EBICSA,
377 	.regmap_name = "atmel,matrix",
378 	.get_config = at91sam9_ebi_get_config,
379 	.xlate_config = atmel_ebi_xslate_smc_config,
380 	.apply_config = at91sam9_ebi_apply_config,
381 };
382 
383 static const struct atmel_ebi_caps at91sam9261_ebi_caps = {
384 	.available_cs = 0xff,
385 	.ebi_csa_offs = AT91SAM9261_MATRIX_EBICSA,
386 	.regmap_name = "atmel,matrix",
387 	.get_config = at91sam9_ebi_get_config,
388 	.xlate_config = atmel_ebi_xslate_smc_config,
389 	.apply_config = at91sam9_ebi_apply_config,
390 };
391 
392 static const struct atmel_ebi_caps at91sam9263_ebi0_caps = {
393 	.available_cs = 0x3f,
394 	.ebi_csa_offs = AT91SAM9263_MATRIX_EBI0CSA,
395 	.regmap_name = "atmel,matrix",
396 	.get_config = at91sam9_ebi_get_config,
397 	.xlate_config = atmel_ebi_xslate_smc_config,
398 	.apply_config = at91sam9_ebi_apply_config,
399 };
400 
401 static const struct atmel_ebi_caps at91sam9263_ebi1_caps = {
402 	.available_cs = 0x7,
403 	.ebi_csa_offs = AT91SAM9263_MATRIX_EBI1CSA,
404 	.regmap_name = "atmel,matrix",
405 	.get_config = at91sam9_ebi_get_config,
406 	.xlate_config = atmel_ebi_xslate_smc_config,
407 	.apply_config = at91sam9_ebi_apply_config,
408 };
409 
410 static const struct atmel_ebi_caps at91sam9rl_ebi_caps = {
411 	.available_cs = 0x3f,
412 	.ebi_csa_offs = AT91SAM9RL_MATRIX_EBICSA,
413 	.regmap_name = "atmel,matrix",
414 	.get_config = at91sam9_ebi_get_config,
415 	.xlate_config = atmel_ebi_xslate_smc_config,
416 	.apply_config = at91sam9_ebi_apply_config,
417 };
418 
419 static const struct atmel_ebi_caps at91sam9g45_ebi_caps = {
420 	.available_cs = 0x3f,
421 	.ebi_csa_offs = AT91SAM9G45_MATRIX_EBICSA,
422 	.regmap_name = "atmel,matrix",
423 	.get_config = at91sam9_ebi_get_config,
424 	.xlate_config = atmel_ebi_xslate_smc_config,
425 	.apply_config = at91sam9_ebi_apply_config,
426 };
427 
428 static const struct atmel_ebi_caps at91sam9x5_ebi_caps = {
429 	.available_cs = 0x3f,
430 	.ebi_csa_offs = AT91SAM9X5_MATRIX_EBICSA,
431 	.regmap_name = "atmel,matrix",
432 	.get_config = at91sam9_ebi_get_config,
433 	.xlate_config = atmel_ebi_xslate_smc_config,
434 	.apply_config = at91sam9_ebi_apply_config,
435 };
436 
437 static const struct atmel_ebi_caps sama5d3_ebi_caps = {
438 	.available_cs = 0xf,
439 	.get_config = sama5_ebi_get_config,
440 	.xlate_config = atmel_ebi_xslate_smc_config,
441 	.apply_config = sama5_ebi_apply_config,
442 };
443 
444 static const struct atmel_ebi_caps sam9x60_ebi_caps = {
445 	.available_cs = 0x3f,
446 	.ebi_csa_offs = AT91_SFR_CCFG_EBICSA,
447 	.regmap_name = "microchip,sfr",
448 	.get_config = at91sam9_ebi_get_config,
449 	.xlate_config = atmel_ebi_xslate_smc_config,
450 	.apply_config = at91sam9_ebi_apply_config,
451 };
452 
453 static const struct of_device_id atmel_ebi_id_table[] = {
454 	{
455 		.compatible = "atmel,at91sam9260-ebi",
456 		.data = &at91sam9260_ebi_caps,
457 	},
458 	{
459 		.compatible = "atmel,at91sam9261-ebi",
460 		.data = &at91sam9261_ebi_caps,
461 	},
462 	{
463 		.compatible = "atmel,at91sam9263-ebi0",
464 		.data = &at91sam9263_ebi0_caps,
465 	},
466 	{
467 		.compatible = "atmel,at91sam9263-ebi1",
468 		.data = &at91sam9263_ebi1_caps,
469 	},
470 	{
471 		.compatible = "atmel,at91sam9rl-ebi",
472 		.data = &at91sam9rl_ebi_caps,
473 	},
474 	{
475 		.compatible = "atmel,at91sam9g45-ebi",
476 		.data = &at91sam9g45_ebi_caps,
477 	},
478 	{
479 		.compatible = "atmel,at91sam9x5-ebi",
480 		.data = &at91sam9x5_ebi_caps,
481 	},
482 	{
483 		.compatible = "atmel,sama5d3-ebi",
484 		.data = &sama5d3_ebi_caps,
485 	},
486 	{
487 		.compatible = "microchip,sam9x60-ebi",
488 		.data = &sam9x60_ebi_caps,
489 	},
490 	{ /* sentinel */ }
491 };
492 
493 static int atmel_ebi_dev_disable(struct atmel_ebi *ebi, struct device_node *np)
494 {
495 	struct device *dev = ebi->dev;
496 	struct property *newprop;
497 
498 	newprop = devm_kzalloc(dev, sizeof(*newprop), GFP_KERNEL);
499 	if (!newprop)
500 		return -ENOMEM;
501 
502 	newprop->name = devm_kstrdup(dev, "status", GFP_KERNEL);
503 	if (!newprop->name)
504 		return -ENOMEM;
505 
506 	newprop->value = devm_kstrdup(dev, "disabled", GFP_KERNEL);
507 	if (!newprop->value)
508 		return -ENOMEM;
509 
510 	newprop->length = sizeof("disabled");
511 
512 	return of_update_property(np, newprop);
513 }
514 
515 static int atmel_ebi_probe(struct platform_device *pdev)
516 {
517 	struct device *dev = &pdev->dev;
518 	struct device_node *child, *np = dev->of_node, *smc_np;
519 	const struct of_device_id *match;
520 	struct atmel_ebi *ebi;
521 	int ret, reg_cells;
522 	struct clk *clk;
523 	u32 val;
524 
525 	match = of_match_device(atmel_ebi_id_table, dev);
526 	if (!match || !match->data)
527 		return -EINVAL;
528 
529 	ebi = devm_kzalloc(dev, sizeof(*ebi), GFP_KERNEL);
530 	if (!ebi)
531 		return -ENOMEM;
532 
533 	platform_set_drvdata(pdev, ebi);
534 
535 	INIT_LIST_HEAD(&ebi->devs);
536 	ebi->caps = match->data;
537 	ebi->dev = dev;
538 
539 	clk = devm_clk_get(dev, NULL);
540 	if (IS_ERR(clk))
541 		return PTR_ERR(clk);
542 
543 	ebi->clk = clk;
544 
545 	smc_np = of_parse_phandle(dev->of_node, "atmel,smc", 0);
546 
547 	ebi->smc.regmap = syscon_node_to_regmap(smc_np);
548 	if (IS_ERR(ebi->smc.regmap))
549 		return PTR_ERR(ebi->smc.regmap);
550 
551 	ebi->smc.layout = atmel_hsmc_get_reg_layout(smc_np);
552 	if (IS_ERR(ebi->smc.layout))
553 		return PTR_ERR(ebi->smc.layout);
554 
555 	ebi->smc.clk = of_clk_get(smc_np, 0);
556 	if (IS_ERR(ebi->smc.clk)) {
557 		if (PTR_ERR(ebi->smc.clk) != -ENOENT)
558 			return PTR_ERR(ebi->smc.clk);
559 
560 		ebi->smc.clk = NULL;
561 	}
562 	ret = clk_prepare_enable(ebi->smc.clk);
563 	if (ret)
564 		return ret;
565 
566 	/*
567 	 * The sama5d3 does not provide an EBICSA register and thus does need
568 	 * to access it.
569 	 */
570 	if (ebi->caps->ebi_csa_offs) {
571 		ebi->regmap =
572 			syscon_regmap_lookup_by_phandle(np,
573 							ebi->caps->regmap_name);
574 		if (IS_ERR(ebi->regmap))
575 			return PTR_ERR(ebi->regmap);
576 	}
577 
578 	ret = of_property_read_u32(np, "#address-cells", &val);
579 	if (ret) {
580 		dev_err(dev, "missing #address-cells property\n");
581 		return ret;
582 	}
583 
584 	reg_cells = val;
585 
586 	ret = of_property_read_u32(np, "#size-cells", &val);
587 	if (ret) {
588 		dev_err(dev, "missing #address-cells property\n");
589 		return ret;
590 	}
591 
592 	reg_cells += val;
593 
594 	for_each_available_child_of_node(np, child) {
595 		if (!of_find_property(child, "reg", NULL))
596 			continue;
597 
598 		ret = atmel_ebi_dev_setup(ebi, child, reg_cells);
599 		if (ret) {
600 			dev_err(dev, "failed to configure EBI bus for %pOF, disabling the device",
601 				child);
602 
603 			ret = atmel_ebi_dev_disable(ebi, child);
604 			if (ret)
605 				return ret;
606 		}
607 	}
608 
609 	return of_platform_populate(np, NULL, NULL, dev);
610 }
611 
612 static __maybe_unused int atmel_ebi_resume(struct device *dev)
613 {
614 	struct atmel_ebi *ebi = dev_get_drvdata(dev);
615 	struct atmel_ebi_dev *ebid;
616 
617 	list_for_each_entry(ebid, &ebi->devs, node) {
618 		int i;
619 
620 		for (i = 0; i < ebid->numcs; i++)
621 			ebid->ebi->caps->apply_config(ebid, &ebid->configs[i]);
622 	}
623 
624 	return 0;
625 }
626 
627 static SIMPLE_DEV_PM_OPS(atmel_ebi_pm_ops, NULL, atmel_ebi_resume);
628 
629 static struct platform_driver atmel_ebi_driver = {
630 	.driver = {
631 		.name = "atmel-ebi",
632 		.of_match_table	= atmel_ebi_id_table,
633 		.pm = &atmel_ebi_pm_ops,
634 	},
635 };
636 builtin_platform_driver_probe(atmel_ebi_driver, atmel_ebi_probe);
637