1 /* 2 * 3 * 4 * Copyright (C) 2007 Mike Isely <isely@pobox.com> 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License as published by 8 * the Free Software Foundation; either version 2 of the License 9 * 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 * 15 */ 16 17 /* 18 19 This source file should encompass ALL per-device type information for the 20 driver. To define a new device, add elements to the pvr2_device_table and 21 pvr2_device_desc structures. 22 23 */ 24 25 #include "pvrusb2-devattr.h" 26 #include <linux/usb.h> 27 #include <linux/module.h> 28 /* This is needed in order to pull in tuner type ids... */ 29 #include <linux/i2c.h> 30 #include <media/tuner.h> 31 #ifdef CONFIG_VIDEO_PVRUSB2_DVB 32 #include "pvrusb2-hdw-internal.h" 33 #include "lgdt330x.h" 34 #include "s5h1409.h" 35 #include "s5h1411.h" 36 #include "tda10048.h" 37 #include "tda18271.h" 38 #include "tda8290.h" 39 #include "tuner-simple.h" 40 #endif 41 42 43 /*------------------------------------------------------------------------*/ 44 /* Hauppauge PVR-USB2 Model 29xxx */ 45 46 static const struct pvr2_device_client_desc pvr2_cli_29xxx[] = { 47 { .module_id = PVR2_CLIENT_ID_SAA7115 }, 48 { .module_id = PVR2_CLIENT_ID_MSP3400 }, 49 { .module_id = PVR2_CLIENT_ID_TUNER }, 50 { .module_id = PVR2_CLIENT_ID_DEMOD }, 51 }; 52 53 #define PVR2_FIRMWARE_29xxx "v4l-pvrusb2-29xxx-01.fw" 54 static const char *pvr2_fw1_names_29xxx[] = { 55 PVR2_FIRMWARE_29xxx, 56 }; 57 58 static const struct pvr2_device_desc pvr2_device_29xxx = { 59 .description = "WinTV PVR USB2 Model 29xxx", 60 .shortname = "29xxx", 61 .client_table.lst = pvr2_cli_29xxx, 62 .client_table.cnt = ARRAY_SIZE(pvr2_cli_29xxx), 63 .fx2_firmware.lst = pvr2_fw1_names_29xxx, 64 .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_29xxx), 65 .flag_has_hauppauge_rom = !0, 66 .flag_has_analogtuner = !0, 67 .flag_has_fmradio = !0, 68 .flag_has_composite = !0, 69 .flag_has_svideo = !0, 70 .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, 71 .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, 72 .ir_scheme = PVR2_IR_SCHEME_29XXX, 73 }; 74 75 76 77 /*------------------------------------------------------------------------*/ 78 /* Hauppauge PVR-USB2 Model 24xxx */ 79 80 static const struct pvr2_device_client_desc pvr2_cli_24xxx[] = { 81 { .module_id = PVR2_CLIENT_ID_CX25840 }, 82 { .module_id = PVR2_CLIENT_ID_TUNER }, 83 { .module_id = PVR2_CLIENT_ID_WM8775 }, 84 { .module_id = PVR2_CLIENT_ID_DEMOD }, 85 }; 86 87 #define PVR2_FIRMWARE_24xxx "v4l-pvrusb2-24xxx-01.fw" 88 static const char *pvr2_fw1_names_24xxx[] = { 89 PVR2_FIRMWARE_24xxx, 90 }; 91 92 static const struct pvr2_device_desc pvr2_device_24xxx = { 93 .description = "WinTV PVR USB2 Model 24xxx", 94 .shortname = "24xxx", 95 .client_table.lst = pvr2_cli_24xxx, 96 .client_table.cnt = ARRAY_SIZE(pvr2_cli_24xxx), 97 .fx2_firmware.lst = pvr2_fw1_names_24xxx, 98 .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_24xxx), 99 .flag_has_cx25840 = !0, 100 .flag_has_wm8775 = !0, 101 .flag_has_hauppauge_rom = !0, 102 .flag_has_analogtuner = !0, 103 .flag_has_fmradio = !0, 104 .flag_has_composite = !0, 105 .flag_has_svideo = !0, 106 .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, 107 .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, 108 .ir_scheme = PVR2_IR_SCHEME_24XXX, 109 }; 110 111 112 113 /*------------------------------------------------------------------------*/ 114 /* GOTVIEW USB2.0 DVD2 */ 115 116 static const struct pvr2_device_client_desc pvr2_cli_gotview_2[] = { 117 { .module_id = PVR2_CLIENT_ID_CX25840 }, 118 { .module_id = PVR2_CLIENT_ID_TUNER }, 119 { .module_id = PVR2_CLIENT_ID_DEMOD }, 120 }; 121 122 static const struct pvr2_device_desc pvr2_device_gotview_2 = { 123 .description = "Gotview USB 2.0 DVD 2", 124 .shortname = "gv2", 125 .client_table.lst = pvr2_cli_gotview_2, 126 .client_table.cnt = ARRAY_SIZE(pvr2_cli_gotview_2), 127 .flag_has_cx25840 = !0, 128 .default_tuner_type = TUNER_PHILIPS_FM1216ME_MK3, 129 .flag_has_analogtuner = !0, 130 .flag_has_fmradio = !0, 131 .flag_has_composite = !0, 132 .flag_has_svideo = !0, 133 .signal_routing_scheme = PVR2_ROUTING_SCHEME_GOTVIEW, 134 }; 135 136 137 138 /*------------------------------------------------------------------------*/ 139 /* GOTVIEW USB2.0 DVD Deluxe */ 140 141 /* (same module list as gotview_2) */ 142 143 static const struct pvr2_device_desc pvr2_device_gotview_2d = { 144 .description = "Gotview USB 2.0 DVD Deluxe", 145 .shortname = "gv2d", 146 .client_table.lst = pvr2_cli_gotview_2, 147 .client_table.cnt = ARRAY_SIZE(pvr2_cli_gotview_2), 148 .flag_has_cx25840 = !0, 149 .default_tuner_type = TUNER_PHILIPS_FM1216ME_MK3, 150 .flag_has_analogtuner = !0, 151 .flag_has_composite = !0, 152 .flag_has_svideo = !0, 153 .signal_routing_scheme = PVR2_ROUTING_SCHEME_GOTVIEW, 154 }; 155 156 157 158 /*------------------------------------------------------------------------*/ 159 /* Terratec Grabster AV400 */ 160 161 static const struct pvr2_device_client_desc pvr2_cli_av400[] = { 162 { .module_id = PVR2_CLIENT_ID_CX25840 }, 163 }; 164 165 static const struct pvr2_device_desc pvr2_device_av400 = { 166 .description = "Terratec Grabster AV400", 167 .shortname = "av400", 168 .flag_is_experimental = 1, 169 .client_table.lst = pvr2_cli_av400, 170 .client_table.cnt = ARRAY_SIZE(pvr2_cli_av400), 171 .flag_has_cx25840 = !0, 172 .flag_has_analogtuner = 0, 173 .flag_has_composite = !0, 174 .flag_has_svideo = !0, 175 .signal_routing_scheme = PVR2_ROUTING_SCHEME_AV400, 176 }; 177 178 179 180 /*------------------------------------------------------------------------*/ 181 /* OnAir Creator */ 182 183 #ifdef CONFIG_VIDEO_PVRUSB2_DVB 184 static struct lgdt330x_config pvr2_lgdt3303_config = { 185 .demod_address = 0x0e, 186 .demod_chip = LGDT3303, 187 .clock_polarity_flip = 1, 188 }; 189 190 static int pvr2_lgdt3303_attach(struct pvr2_dvb_adapter *adap) 191 { 192 adap->fe = dvb_attach(lgdt330x_attach, &pvr2_lgdt3303_config, 193 &adap->channel.hdw->i2c_adap); 194 if (adap->fe) 195 return 0; 196 197 return -EIO; 198 } 199 200 static int pvr2_lgh06xf_attach(struct pvr2_dvb_adapter *adap) 201 { 202 dvb_attach(simple_tuner_attach, adap->fe, 203 &adap->channel.hdw->i2c_adap, 0x61, 204 TUNER_LG_TDVS_H06XF); 205 206 return 0; 207 } 208 209 static const struct pvr2_dvb_props pvr2_onair_creator_fe_props = { 210 .frontend_attach = pvr2_lgdt3303_attach, 211 .tuner_attach = pvr2_lgh06xf_attach, 212 }; 213 #endif 214 215 static const struct pvr2_device_client_desc pvr2_cli_onair_creator[] = { 216 { .module_id = PVR2_CLIENT_ID_SAA7115 }, 217 { .module_id = PVR2_CLIENT_ID_CS53L32A }, 218 { .module_id = PVR2_CLIENT_ID_TUNER }, 219 }; 220 221 static const struct pvr2_device_desc pvr2_device_onair_creator = { 222 .description = "OnAir Creator Hybrid USB tuner", 223 .shortname = "oac", 224 .client_table.lst = pvr2_cli_onair_creator, 225 .client_table.cnt = ARRAY_SIZE(pvr2_cli_onair_creator), 226 .default_tuner_type = TUNER_LG_TDVS_H06XF, 227 .flag_has_analogtuner = !0, 228 .flag_has_composite = !0, 229 .flag_has_svideo = !0, 230 .flag_digital_requires_cx23416 = !0, 231 .signal_routing_scheme = PVR2_ROUTING_SCHEME_ONAIR, 232 .digital_control_scheme = PVR2_DIGITAL_SCHEME_ONAIR, 233 .default_std_mask = V4L2_STD_NTSC_M, 234 #ifdef CONFIG_VIDEO_PVRUSB2_DVB 235 .dvb_props = &pvr2_onair_creator_fe_props, 236 #endif 237 }; 238 239 240 241 /*------------------------------------------------------------------------*/ 242 /* OnAir USB 2.0 */ 243 244 #ifdef CONFIG_VIDEO_PVRUSB2_DVB 245 static struct lgdt330x_config pvr2_lgdt3302_config = { 246 .demod_address = 0x0e, 247 .demod_chip = LGDT3302, 248 }; 249 250 static int pvr2_lgdt3302_attach(struct pvr2_dvb_adapter *adap) 251 { 252 adap->fe = dvb_attach(lgdt330x_attach, &pvr2_lgdt3302_config, 253 &adap->channel.hdw->i2c_adap); 254 if (adap->fe) 255 return 0; 256 257 return -EIO; 258 } 259 260 static int pvr2_fcv1236d_attach(struct pvr2_dvb_adapter *adap) 261 { 262 dvb_attach(simple_tuner_attach, adap->fe, 263 &adap->channel.hdw->i2c_adap, 0x61, 264 TUNER_PHILIPS_FCV1236D); 265 266 return 0; 267 } 268 269 static const struct pvr2_dvb_props pvr2_onair_usb2_fe_props = { 270 .frontend_attach = pvr2_lgdt3302_attach, 271 .tuner_attach = pvr2_fcv1236d_attach, 272 }; 273 #endif 274 275 static const struct pvr2_device_client_desc pvr2_cli_onair_usb2[] = { 276 { .module_id = PVR2_CLIENT_ID_SAA7115 }, 277 { .module_id = PVR2_CLIENT_ID_CS53L32A }, 278 { .module_id = PVR2_CLIENT_ID_TUNER }, 279 }; 280 281 static const struct pvr2_device_desc pvr2_device_onair_usb2 = { 282 .description = "OnAir USB2 Hybrid USB tuner", 283 .shortname = "oa2", 284 .client_table.lst = pvr2_cli_onair_usb2, 285 .client_table.cnt = ARRAY_SIZE(pvr2_cli_onair_usb2), 286 .default_tuner_type = TUNER_PHILIPS_FCV1236D, 287 .flag_has_analogtuner = !0, 288 .flag_has_composite = !0, 289 .flag_has_svideo = !0, 290 .flag_digital_requires_cx23416 = !0, 291 .signal_routing_scheme = PVR2_ROUTING_SCHEME_ONAIR, 292 .digital_control_scheme = PVR2_DIGITAL_SCHEME_ONAIR, 293 .default_std_mask = V4L2_STD_NTSC_M, 294 #ifdef CONFIG_VIDEO_PVRUSB2_DVB 295 .dvb_props = &pvr2_onair_usb2_fe_props, 296 #endif 297 }; 298 299 300 301 /*------------------------------------------------------------------------*/ 302 /* Hauppauge PVR-USB2 Model 73xxx */ 303 304 #ifdef CONFIG_VIDEO_PVRUSB2_DVB 305 static struct tda10048_config hauppauge_tda10048_config = { 306 .demod_address = 0x10 >> 1, 307 .output_mode = TDA10048_PARALLEL_OUTPUT, 308 .fwbulkwritelen = TDA10048_BULKWRITE_50, 309 .inversion = TDA10048_INVERSION_ON, 310 .dtv6_if_freq_khz = TDA10048_IF_3300, 311 .dtv7_if_freq_khz = TDA10048_IF_3800, 312 .dtv8_if_freq_khz = TDA10048_IF_4300, 313 .clk_freq_khz = TDA10048_CLK_16000, 314 .disable_gate_access = 1, 315 }; 316 317 static struct tda829x_config tda829x_no_probe = { 318 .probe_tuner = TDA829X_DONT_PROBE, 319 }; 320 321 static struct tda18271_std_map hauppauge_tda18271_dvbt_std_map = { 322 .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4, 323 .if_lvl = 1, .rfagc_top = 0x37, }, 324 .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5, 325 .if_lvl = 1, .rfagc_top = 0x37, }, 326 .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6, 327 .if_lvl = 1, .rfagc_top = 0x37, }, 328 }; 329 330 static struct tda18271_config hauppauge_tda18271_dvb_config = { 331 .std_map = &hauppauge_tda18271_dvbt_std_map, 332 .gate = TDA18271_GATE_ANALOG, 333 .output_opt = TDA18271_OUTPUT_LT_OFF, 334 }; 335 336 static int pvr2_tda10048_attach(struct pvr2_dvb_adapter *adap) 337 { 338 adap->fe = dvb_attach(tda10048_attach, &hauppauge_tda10048_config, 339 &adap->channel.hdw->i2c_adap); 340 if (adap->fe) 341 return 0; 342 343 return -EIO; 344 } 345 346 static int pvr2_73xxx_tda18271_8295_attach(struct pvr2_dvb_adapter *adap) 347 { 348 dvb_attach(tda829x_attach, adap->fe, 349 &adap->channel.hdw->i2c_adap, 0x42, 350 &tda829x_no_probe); 351 dvb_attach(tda18271_attach, adap->fe, 0x60, 352 &adap->channel.hdw->i2c_adap, 353 &hauppauge_tda18271_dvb_config); 354 355 return 0; 356 } 357 358 static const struct pvr2_dvb_props pvr2_73xxx_dvb_props = { 359 .frontend_attach = pvr2_tda10048_attach, 360 .tuner_attach = pvr2_73xxx_tda18271_8295_attach, 361 }; 362 #endif 363 364 static const struct pvr2_device_client_desc pvr2_cli_73xxx[] = { 365 { .module_id = PVR2_CLIENT_ID_CX25840 }, 366 { .module_id = PVR2_CLIENT_ID_TUNER, 367 .i2c_address_list = "\x42"}, 368 }; 369 370 #define PVR2_FIRMWARE_73xxx "v4l-pvrusb2-73xxx-01.fw" 371 static const char *pvr2_fw1_names_73xxx[] = { 372 PVR2_FIRMWARE_73xxx, 373 }; 374 375 static const struct pvr2_device_desc pvr2_device_73xxx = { 376 .description = "WinTV HVR-1900 Model 73xxx", 377 .shortname = "73xxx", 378 .client_table.lst = pvr2_cli_73xxx, 379 .client_table.cnt = ARRAY_SIZE(pvr2_cli_73xxx), 380 .fx2_firmware.lst = pvr2_fw1_names_73xxx, 381 .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_73xxx), 382 .flag_has_cx25840 = !0, 383 .flag_has_hauppauge_rom = !0, 384 .flag_has_analogtuner = !0, 385 .flag_has_composite = !0, 386 .flag_has_svideo = !0, 387 .flag_fx2_16kb = !0, 388 .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, 389 .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE, 390 .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, 391 .ir_scheme = PVR2_IR_SCHEME_ZILOG, 392 #ifdef CONFIG_VIDEO_PVRUSB2_DVB 393 .dvb_props = &pvr2_73xxx_dvb_props, 394 #endif 395 }; 396 397 398 399 /*------------------------------------------------------------------------*/ 400 /* Hauppauge PVR-USB2 Model 75xxx */ 401 402 #ifdef CONFIG_VIDEO_PVRUSB2_DVB 403 static struct s5h1409_config pvr2_s5h1409_config = { 404 .demod_address = 0x32 >> 1, 405 .output_mode = S5H1409_PARALLEL_OUTPUT, 406 .gpio = S5H1409_GPIO_OFF, 407 .qam_if = 4000, 408 .inversion = S5H1409_INVERSION_ON, 409 .status_mode = S5H1409_DEMODLOCKING, 410 }; 411 412 static struct s5h1411_config pvr2_s5h1411_config = { 413 .output_mode = S5H1411_PARALLEL_OUTPUT, 414 .gpio = S5H1411_GPIO_OFF, 415 .vsb_if = S5H1411_IF_44000, 416 .qam_if = S5H1411_IF_4000, 417 .inversion = S5H1411_INVERSION_ON, 418 .status_mode = S5H1411_DEMODLOCKING, 419 }; 420 421 static struct tda18271_std_map hauppauge_tda18271_std_map = { 422 .atsc_6 = { .if_freq = 5380, .agc_mode = 3, .std = 3, 423 .if_lvl = 6, .rfagc_top = 0x37, }, 424 .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0, 425 .if_lvl = 6, .rfagc_top = 0x37, }, 426 }; 427 428 static struct tda18271_config hauppauge_tda18271_config = { 429 .std_map = &hauppauge_tda18271_std_map, 430 .gate = TDA18271_GATE_ANALOG, 431 .output_opt = TDA18271_OUTPUT_LT_OFF, 432 }; 433 434 static int pvr2_s5h1409_attach(struct pvr2_dvb_adapter *adap) 435 { 436 adap->fe = dvb_attach(s5h1409_attach, &pvr2_s5h1409_config, 437 &adap->channel.hdw->i2c_adap); 438 if (adap->fe) 439 return 0; 440 441 return -EIO; 442 } 443 444 static int pvr2_s5h1411_attach(struct pvr2_dvb_adapter *adap) 445 { 446 adap->fe = dvb_attach(s5h1411_attach, &pvr2_s5h1411_config, 447 &adap->channel.hdw->i2c_adap); 448 if (adap->fe) 449 return 0; 450 451 return -EIO; 452 } 453 454 static int pvr2_tda18271_8295_attach(struct pvr2_dvb_adapter *adap) 455 { 456 dvb_attach(tda829x_attach, adap->fe, 457 &adap->channel.hdw->i2c_adap, 0x42, 458 &tda829x_no_probe); 459 dvb_attach(tda18271_attach, adap->fe, 0x60, 460 &adap->channel.hdw->i2c_adap, 461 &hauppauge_tda18271_config); 462 463 return 0; 464 } 465 466 static const struct pvr2_dvb_props pvr2_750xx_dvb_props = { 467 .frontend_attach = pvr2_s5h1409_attach, 468 .tuner_attach = pvr2_tda18271_8295_attach, 469 }; 470 471 static const struct pvr2_dvb_props pvr2_751xx_dvb_props = { 472 .frontend_attach = pvr2_s5h1411_attach, 473 .tuner_attach = pvr2_tda18271_8295_attach, 474 }; 475 #endif 476 477 #define PVR2_FIRMWARE_75xxx "v4l-pvrusb2-73xxx-01.fw" 478 static const char *pvr2_fw1_names_75xxx[] = { 479 PVR2_FIRMWARE_75xxx, 480 }; 481 482 static const struct pvr2_device_desc pvr2_device_750xx = { 483 .description = "WinTV HVR-1950 Model 750xx", 484 .shortname = "750xx", 485 .client_table.lst = pvr2_cli_73xxx, 486 .client_table.cnt = ARRAY_SIZE(pvr2_cli_73xxx), 487 .fx2_firmware.lst = pvr2_fw1_names_75xxx, 488 .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_75xxx), 489 .flag_has_cx25840 = !0, 490 .flag_has_hauppauge_rom = !0, 491 .flag_has_analogtuner = !0, 492 .flag_has_composite = !0, 493 .flag_has_svideo = !0, 494 .flag_fx2_16kb = !0, 495 .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, 496 .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE, 497 .default_std_mask = V4L2_STD_NTSC_M, 498 .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, 499 .ir_scheme = PVR2_IR_SCHEME_ZILOG, 500 #ifdef CONFIG_VIDEO_PVRUSB2_DVB 501 .dvb_props = &pvr2_750xx_dvb_props, 502 #endif 503 }; 504 505 static const struct pvr2_device_desc pvr2_device_751xx = { 506 .description = "WinTV HVR-1950 Model 751xx", 507 .shortname = "751xx", 508 .client_table.lst = pvr2_cli_73xxx, 509 .client_table.cnt = ARRAY_SIZE(pvr2_cli_73xxx), 510 .fx2_firmware.lst = pvr2_fw1_names_75xxx, 511 .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_75xxx), 512 .flag_has_cx25840 = !0, 513 .flag_has_hauppauge_rom = !0, 514 .flag_has_analogtuner = !0, 515 .flag_has_composite = !0, 516 .flag_has_svideo = !0, 517 .flag_fx2_16kb = !0, 518 .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, 519 .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE, 520 .default_std_mask = V4L2_STD_NTSC_M, 521 .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, 522 .ir_scheme = PVR2_IR_SCHEME_ZILOG, 523 #ifdef CONFIG_VIDEO_PVRUSB2_DVB 524 .dvb_props = &pvr2_751xx_dvb_props, 525 #endif 526 }; 527 528 529 530 /*------------------------------------------------------------------------*/ 531 532 struct usb_device_id pvr2_device_table[] = { 533 { USB_DEVICE(0x2040, 0x2900), 534 .driver_info = (kernel_ulong_t)&pvr2_device_29xxx}, 535 { USB_DEVICE(0x2040, 0x2950), /* Logically identical to 2900 */ 536 .driver_info = (kernel_ulong_t)&pvr2_device_29xxx}, 537 { USB_DEVICE(0x2040, 0x2400), 538 .driver_info = (kernel_ulong_t)&pvr2_device_24xxx}, 539 { USB_DEVICE(0x1164, 0x0622), 540 .driver_info = (kernel_ulong_t)&pvr2_device_gotview_2}, 541 { USB_DEVICE(0x1164, 0x0602), 542 .driver_info = (kernel_ulong_t)&pvr2_device_gotview_2d}, 543 { USB_DEVICE(0x11ba, 0x1003), 544 .driver_info = (kernel_ulong_t)&pvr2_device_onair_creator}, 545 { USB_DEVICE(0x11ba, 0x1001), 546 .driver_info = (kernel_ulong_t)&pvr2_device_onair_usb2}, 547 { USB_DEVICE(0x2040, 0x7300), 548 .driver_info = (kernel_ulong_t)&pvr2_device_73xxx}, 549 { USB_DEVICE(0x2040, 0x7500), 550 .driver_info = (kernel_ulong_t)&pvr2_device_750xx}, 551 { USB_DEVICE(0x2040, 0x7501), 552 .driver_info = (kernel_ulong_t)&pvr2_device_751xx}, 553 { USB_DEVICE(0x0ccd, 0x0039), 554 .driver_info = (kernel_ulong_t)&pvr2_device_av400}, 555 { } 556 }; 557 558 MODULE_DEVICE_TABLE(usb, pvr2_device_table); 559 MODULE_FIRMWARE(PVR2_FIRMWARE_29xxx); 560 MODULE_FIRMWARE(PVR2_FIRMWARE_24xxx); 561 MODULE_FIRMWARE(PVR2_FIRMWARE_73xxx); 562 MODULE_FIRMWARE(PVR2_FIRMWARE_75xxx); 563