1 /* 2 * Hauppauge HD PVR USB driver 3 * 4 * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com) 5 * Copyright (C) 2008 Janne Grunau (j@jannau.net) 6 * Copyright (C) 2008 John Poet 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation, version 2. 11 * 12 */ 13 14 #include <linux/kernel.h> 15 #include <linux/errno.h> 16 #include <linux/init.h> 17 #include <linux/slab.h> 18 #include <linux/module.h> 19 #include <linux/uaccess.h> 20 #include <linux/atomic.h> 21 #include <linux/usb.h> 22 #include <linux/mutex.h> 23 #include <linux/i2c.h> 24 25 #include <linux/videodev2.h> 26 #include <media/v4l2-dev.h> 27 #include <media/v4l2-common.h> 28 29 #include "hdpvr.h" 30 31 static int video_nr[HDPVR_MAX] = {[0 ... (HDPVR_MAX - 1)] = UNSET}; 32 module_param_array(video_nr, int, NULL, 0); 33 MODULE_PARM_DESC(video_nr, "video device number (-1=Auto)"); 34 35 /* holds the number of currently registered devices */ 36 static atomic_t dev_nr = ATOMIC_INIT(-1); 37 38 int hdpvr_debug; 39 module_param(hdpvr_debug, int, S_IRUGO|S_IWUSR); 40 MODULE_PARM_DESC(hdpvr_debug, "enable debugging output"); 41 42 static uint default_video_input = HDPVR_VIDEO_INPUTS; 43 module_param(default_video_input, uint, S_IRUGO|S_IWUSR); 44 MODULE_PARM_DESC(default_video_input, "default video input: 0=Component / 1=S-Video / 2=Composite"); 45 46 static uint default_audio_input = HDPVR_AUDIO_INPUTS; 47 module_param(default_audio_input, uint, S_IRUGO|S_IWUSR); 48 MODULE_PARM_DESC(default_audio_input, "default audio input: 0=RCA back / 1=RCA front / 2=S/PDIF"); 49 50 static bool boost_audio; 51 module_param(boost_audio, bool, S_IRUGO|S_IWUSR); 52 MODULE_PARM_DESC(boost_audio, "boost the audio signal"); 53 54 55 /* table of devices that work with this driver */ 56 static const struct usb_device_id hdpvr_table[] = { 57 { USB_DEVICE(HD_PVR_VENDOR_ID, HD_PVR_PRODUCT_ID) }, 58 { USB_DEVICE(HD_PVR_VENDOR_ID, HD_PVR_PRODUCT_ID1) }, 59 { USB_DEVICE(HD_PVR_VENDOR_ID, HD_PVR_PRODUCT_ID2) }, 60 { USB_DEVICE(HD_PVR_VENDOR_ID, HD_PVR_PRODUCT_ID3) }, 61 { USB_DEVICE(HD_PVR_VENDOR_ID, HD_PVR_PRODUCT_ID4) }, 62 { } /* Terminating entry */ 63 }; 64 MODULE_DEVICE_TABLE(usb, hdpvr_table); 65 66 67 void hdpvr_delete(struct hdpvr_device *dev) 68 { 69 hdpvr_free_buffers(dev); 70 usb_put_dev(dev->udev); 71 } 72 73 static void challenge(u8 *bytes) 74 { 75 __le64 *i64P; 76 u64 tmp64; 77 uint i, idx; 78 79 for (idx = 0; idx < 32; ++idx) { 80 81 if (idx & 0x3) 82 bytes[(idx >> 3) + 3] = bytes[(idx >> 2) & 0x3]; 83 84 switch (idx & 0x3) { 85 case 0x3: 86 bytes[2] += bytes[3] * 4 + bytes[4] + bytes[5]; 87 bytes[4] += bytes[(idx & 0x1) * 2] * 9 + 9; 88 break; 89 case 0x1: 90 bytes[0] *= 8; 91 bytes[0] += 7*idx + 4; 92 bytes[6] += bytes[3] * 3; 93 break; 94 case 0x0: 95 bytes[3 - (idx >> 3)] = bytes[idx >> 2]; 96 bytes[5] += bytes[6] * 3; 97 for (i = 0; i < 3; i++) 98 bytes[3] *= bytes[3] + 1; 99 break; 100 case 0x2: 101 for (i = 0; i < 3; i++) 102 bytes[1] *= bytes[6] + 1; 103 for (i = 0; i < 3; i++) { 104 i64P = (__le64 *)bytes; 105 tmp64 = le64_to_cpup(i64P); 106 tmp64 = tmp64 + (tmp64 << (bytes[7] & 0x0f)); 107 *i64P = cpu_to_le64(tmp64); 108 } 109 break; 110 } 111 } 112 } 113 114 /* try to init the device like the windows driver */ 115 static int device_authorization(struct hdpvr_device *dev) 116 { 117 118 int ret, retval = -ENOMEM; 119 char request_type = 0x38, rcv_request = 0x81; 120 char *response; 121 122 mutex_lock(&dev->usbc_mutex); 123 ret = usb_control_msg(dev->udev, 124 usb_rcvctrlpipe(dev->udev, 0), 125 rcv_request, 0x80 | request_type, 126 0x0400, 0x0003, 127 dev->usbc_buf, 46, 128 10000); 129 if (ret != 46) { 130 v4l2_err(&dev->v4l2_dev, 131 "unexpected answer of status request, len %d\n", ret); 132 goto unlock; 133 } 134 #ifdef HDPVR_DEBUG 135 else { 136 v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev, 137 "Status request returned, len %d: %46ph\n", 138 ret, dev->usbc_buf); 139 } 140 #endif 141 142 dev->fw_ver = dev->usbc_buf[1]; 143 144 v4l2_info(&dev->v4l2_dev, "firmware version 0x%x dated %s\n", 145 dev->fw_ver, &dev->usbc_buf[2]); 146 147 if (dev->fw_ver > 0x15) { 148 dev->options.brightness = 0x80; 149 dev->options.contrast = 0x40; 150 dev->options.hue = 0xf; 151 dev->options.saturation = 0x40; 152 dev->options.sharpness = 0x80; 153 } 154 155 switch (dev->fw_ver) { 156 case HDPVR_FIRMWARE_VERSION: 157 dev->flags &= ~HDPVR_FLAG_AC3_CAP; 158 break; 159 case HDPVR_FIRMWARE_VERSION_AC3: 160 case HDPVR_FIRMWARE_VERSION_0X12: 161 case HDPVR_FIRMWARE_VERSION_0X15: 162 case HDPVR_FIRMWARE_VERSION_0X1E: 163 dev->flags |= HDPVR_FLAG_AC3_CAP; 164 break; 165 default: 166 v4l2_info(&dev->v4l2_dev, "untested firmware, the driver might not work.\n"); 167 if (dev->fw_ver >= HDPVR_FIRMWARE_VERSION_AC3) 168 dev->flags |= HDPVR_FLAG_AC3_CAP; 169 else 170 dev->flags &= ~HDPVR_FLAG_AC3_CAP; 171 } 172 173 response = dev->usbc_buf+38; 174 #ifdef HDPVR_DEBUG 175 v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev, "challenge: %8ph\n", 176 response); 177 #endif 178 challenge(response); 179 #ifdef HDPVR_DEBUG 180 v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev, " response: %8ph\n", 181 response); 182 #endif 183 184 msleep(100); 185 ret = usb_control_msg(dev->udev, 186 usb_sndctrlpipe(dev->udev, 0), 187 0xd1, 0x00 | request_type, 188 0x0000, 0x0000, 189 response, 8, 190 10000); 191 v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev, 192 "magic request returned %d\n", ret); 193 194 retval = ret != 8; 195 unlock: 196 mutex_unlock(&dev->usbc_mutex); 197 return retval; 198 } 199 200 static int hdpvr_device_init(struct hdpvr_device *dev) 201 { 202 int ret; 203 u8 *buf; 204 205 if (device_authorization(dev)) 206 return -EACCES; 207 208 /* default options for init */ 209 hdpvr_set_options(dev); 210 211 /* set filter options */ 212 mutex_lock(&dev->usbc_mutex); 213 buf = dev->usbc_buf; 214 buf[0] = 0x03; buf[1] = 0x03; buf[2] = 0x00; buf[3] = 0x00; 215 ret = usb_control_msg(dev->udev, 216 usb_sndctrlpipe(dev->udev, 0), 217 0x01, 0x38, 218 CTRL_LOW_PASS_FILTER_VALUE, CTRL_DEFAULT_INDEX, 219 buf, 4, 220 1000); 221 v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev, 222 "control request returned %d\n", ret); 223 mutex_unlock(&dev->usbc_mutex); 224 225 /* enable fan and bling leds */ 226 mutex_lock(&dev->usbc_mutex); 227 buf[0] = 0x1; 228 ret = usb_control_msg(dev->udev, 229 usb_sndctrlpipe(dev->udev, 0), 230 0xd4, 0x38, 0, 0, buf, 1, 231 1000); 232 v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev, 233 "control request returned %d\n", ret); 234 235 /* boost analog audio */ 236 buf[0] = boost_audio; 237 ret = usb_control_msg(dev->udev, 238 usb_sndctrlpipe(dev->udev, 0), 239 0xd5, 0x38, 0, 0, buf, 1, 240 1000); 241 v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev, 242 "control request returned %d\n", ret); 243 mutex_unlock(&dev->usbc_mutex); 244 245 dev->status = STATUS_IDLE; 246 return 0; 247 } 248 249 static const struct hdpvr_options hdpvr_default_options = { 250 .video_std = HDPVR_60HZ, 251 .video_input = HDPVR_COMPONENT, 252 .audio_input = HDPVR_RCA_BACK, 253 .bitrate = 65, /* 6 mbps */ 254 .peak_bitrate = 90, /* 9 mbps */ 255 .bitrate_mode = HDPVR_CONSTANT, 256 .gop_mode = HDPVR_SIMPLE_IDR_GOP, 257 .audio_codec = V4L2_MPEG_AUDIO_ENCODING_AAC, 258 /* original picture controls for firmware version <= 0x15 */ 259 /* updated in device_authorization() for newer firmware */ 260 .brightness = 0x86, 261 .contrast = 0x80, 262 .hue = 0x80, 263 .saturation = 0x80, 264 .sharpness = 0x80, 265 }; 266 267 static int hdpvr_probe(struct usb_interface *interface, 268 const struct usb_device_id *id) 269 { 270 struct hdpvr_device *dev; 271 struct usb_host_interface *iface_desc; 272 struct usb_endpoint_descriptor *endpoint; 273 #if IS_ENABLED(CONFIG_I2C) 274 struct i2c_client *client; 275 #endif 276 size_t buffer_size; 277 int i; 278 int retval = -ENOMEM; 279 280 /* allocate memory for our device state and initialize it */ 281 dev = kzalloc(sizeof(*dev), GFP_KERNEL); 282 if (!dev) { 283 dev_err(&interface->dev, "Out of memory\n"); 284 goto error; 285 } 286 287 /* init video transfer queues first of all */ 288 /* to prevent oops in hdpvr_delete() on error paths */ 289 INIT_LIST_HEAD(&dev->free_buff_list); 290 INIT_LIST_HEAD(&dev->rec_buff_list); 291 292 /* register v4l2_device early so it can be used for printks */ 293 if (v4l2_device_register(&interface->dev, &dev->v4l2_dev)) { 294 dev_err(&interface->dev, "v4l2_device_register failed\n"); 295 goto error; 296 } 297 298 mutex_init(&dev->io_mutex); 299 mutex_init(&dev->i2c_mutex); 300 mutex_init(&dev->usbc_mutex); 301 dev->usbc_buf = kmalloc(64, GFP_KERNEL); 302 if (!dev->usbc_buf) { 303 v4l2_err(&dev->v4l2_dev, "Out of memory\n"); 304 goto error; 305 } 306 307 init_waitqueue_head(&dev->wait_buffer); 308 init_waitqueue_head(&dev->wait_data); 309 310 dev->options = hdpvr_default_options; 311 312 if (default_video_input < HDPVR_VIDEO_INPUTS) 313 dev->options.video_input = default_video_input; 314 315 if (default_audio_input < HDPVR_AUDIO_INPUTS) { 316 dev->options.audio_input = default_audio_input; 317 if (default_audio_input == HDPVR_SPDIF) 318 dev->options.audio_codec = 319 V4L2_MPEG_AUDIO_ENCODING_AC3; 320 } 321 322 dev->udev = usb_get_dev(interface_to_usbdev(interface)); 323 324 /* set up the endpoint information */ 325 /* use only the first bulk-in and bulk-out endpoints */ 326 iface_desc = interface->cur_altsetting; 327 for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { 328 endpoint = &iface_desc->endpoint[i].desc; 329 330 if (!dev->bulk_in_endpointAddr && 331 usb_endpoint_is_bulk_in(endpoint)) { 332 /* USB interface description is buggy, reported max 333 * packet size is 512 bytes, windows driver uses 8192 */ 334 buffer_size = 8192; 335 dev->bulk_in_size = buffer_size; 336 dev->bulk_in_endpointAddr = endpoint->bEndpointAddress; 337 } 338 339 } 340 if (!dev->bulk_in_endpointAddr) { 341 v4l2_err(&dev->v4l2_dev, "Could not find bulk-in endpoint\n"); 342 goto error; 343 } 344 345 /* init the device */ 346 if (hdpvr_device_init(dev)) { 347 v4l2_err(&dev->v4l2_dev, "device init failed\n"); 348 goto error; 349 } 350 351 mutex_lock(&dev->io_mutex); 352 if (hdpvr_alloc_buffers(dev, NUM_BUFFERS)) { 353 mutex_unlock(&dev->io_mutex); 354 v4l2_err(&dev->v4l2_dev, 355 "allocating transfer buffers failed\n"); 356 goto error; 357 } 358 mutex_unlock(&dev->io_mutex); 359 360 #if IS_ENABLED(CONFIG_I2C) 361 retval = hdpvr_register_i2c_adapter(dev); 362 if (retval < 0) { 363 v4l2_err(&dev->v4l2_dev, "i2c adapter register failed\n"); 364 goto error; 365 } 366 367 client = hdpvr_register_ir_rx_i2c(dev); 368 if (!client) { 369 v4l2_err(&dev->v4l2_dev, "i2c IR RX device register failed\n"); 370 retval = -ENODEV; 371 goto reg_fail; 372 } 373 374 client = hdpvr_register_ir_tx_i2c(dev); 375 if (!client) { 376 v4l2_err(&dev->v4l2_dev, "i2c IR TX device register failed\n"); 377 retval = -ENODEV; 378 goto reg_fail; 379 } 380 #endif 381 382 retval = hdpvr_register_videodev(dev, &interface->dev, 383 video_nr[atomic_inc_return(&dev_nr)]); 384 if (retval < 0) { 385 v4l2_err(&dev->v4l2_dev, "registering videodev failed\n"); 386 goto reg_fail; 387 } 388 389 /* let the user know what node this device is now attached to */ 390 v4l2_info(&dev->v4l2_dev, "device now attached to %s\n", 391 video_device_node_name(&dev->video_dev)); 392 return 0; 393 394 reg_fail: 395 #if IS_ENABLED(CONFIG_I2C) 396 i2c_del_adapter(&dev->i2c_adapter); 397 #endif 398 error: 399 if (dev) { 400 flush_work(&dev->worker); 401 /* this frees allocated memory */ 402 hdpvr_delete(dev); 403 } 404 return retval; 405 } 406 407 static void hdpvr_disconnect(struct usb_interface *interface) 408 { 409 struct hdpvr_device *dev = to_hdpvr_dev(usb_get_intfdata(interface)); 410 411 v4l2_info(&dev->v4l2_dev, "device %s disconnected\n", 412 video_device_node_name(&dev->video_dev)); 413 /* prevent more I/O from starting and stop any ongoing */ 414 mutex_lock(&dev->io_mutex); 415 dev->status = STATUS_DISCONNECTED; 416 wake_up_interruptible(&dev->wait_data); 417 wake_up_interruptible(&dev->wait_buffer); 418 mutex_unlock(&dev->io_mutex); 419 v4l2_device_disconnect(&dev->v4l2_dev); 420 msleep(100); 421 flush_work(&dev->worker); 422 mutex_lock(&dev->io_mutex); 423 hdpvr_cancel_queue(dev); 424 mutex_unlock(&dev->io_mutex); 425 #if IS_ENABLED(CONFIG_I2C) 426 i2c_del_adapter(&dev->i2c_adapter); 427 #endif 428 video_unregister_device(&dev->video_dev); 429 atomic_dec(&dev_nr); 430 } 431 432 433 static struct usb_driver hdpvr_usb_driver = { 434 .name = "hdpvr", 435 .probe = hdpvr_probe, 436 .disconnect = hdpvr_disconnect, 437 .id_table = hdpvr_table, 438 }; 439 440 module_usb_driver(hdpvr_usb_driver); 441 442 MODULE_LICENSE("GPL"); 443 MODULE_VERSION("0.2.1"); 444 MODULE_AUTHOR("Janne Grunau"); 445 MODULE_DESCRIPTION("Hauppauge HD PVR driver"); 446