1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * gspca ViCam subdriver 4 * 5 * Copyright (C) 2011 Hans de Goede <hdegoede@redhat.com> 6 * 7 * Based on the usbvideo vicam driver, which is: 8 * 9 * Copyright (c) 2002 Joe Burks (jburks@wavicle.org), 10 * Chris Cheney (chris.cheney@gmail.com), 11 * Pavel Machek (pavel@ucw.cz), 12 * John Tyner (jtyner@cs.ucr.edu), 13 * Monroe Williams (monroe@pobox.com) 14 */ 15 16 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 17 18 #define MODULE_NAME "vicam" 19 #define HEADER_SIZE 64 20 21 #include <linux/workqueue.h> 22 #include <linux/slab.h> 23 #include <linux/firmware.h> 24 #include <linux/ihex.h> 25 #include "gspca.h" 26 27 #define VICAM_FIRMWARE "vicam/firmware.fw" 28 29 MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); 30 MODULE_DESCRIPTION("GSPCA ViCam USB Camera Driver"); 31 MODULE_LICENSE("GPL"); 32 MODULE_FIRMWARE(VICAM_FIRMWARE); 33 34 struct sd { 35 struct gspca_dev gspca_dev; /* !! must be the first item */ 36 struct work_struct work_struct; 37 }; 38 39 /* The vicam sensor has a resolution of 512 x 244, with I believe square 40 pixels, but this is forced to a 4:3 ratio by optics. So it has 41 non square pixels :( */ 42 static struct v4l2_pix_format vicam_mode[] = { 43 { 256, 122, V4L2_PIX_FMT_SGRBG8, V4L2_FIELD_NONE, 44 .bytesperline = 256, 45 .sizeimage = 256 * 122, 46 .colorspace = V4L2_COLORSPACE_SRGB,}, 47 /* 2 modes with somewhat more square pixels */ 48 { 256, 200, V4L2_PIX_FMT_SGRBG8, V4L2_FIELD_NONE, 49 .bytesperline = 256, 50 .sizeimage = 256 * 200, 51 .colorspace = V4L2_COLORSPACE_SRGB,}, 52 { 256, 240, V4L2_PIX_FMT_SGRBG8, V4L2_FIELD_NONE, 53 .bytesperline = 256, 54 .sizeimage = 256 * 240, 55 .colorspace = V4L2_COLORSPACE_SRGB,}, 56 #if 0 /* This mode has extremely non square pixels, testing use only */ 57 { 512, 122, V4L2_PIX_FMT_SGRBG8, V4L2_FIELD_NONE, 58 .bytesperline = 512, 59 .sizeimage = 512 * 122, 60 .colorspace = V4L2_COLORSPACE_SRGB,}, 61 #endif 62 { 512, 244, V4L2_PIX_FMT_SGRBG8, V4L2_FIELD_NONE, 63 .bytesperline = 512, 64 .sizeimage = 512 * 244, 65 .colorspace = V4L2_COLORSPACE_SRGB,}, 66 }; 67 68 static int vicam_control_msg(struct gspca_dev *gspca_dev, u8 request, 69 u16 value, u16 index, u8 *data, u16 len) 70 { 71 int ret; 72 73 ret = usb_control_msg(gspca_dev->dev, 74 usb_sndctrlpipe(gspca_dev->dev, 0), 75 request, 76 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 77 value, index, data, len, 1000); 78 if (ret < 0) 79 pr_err("control msg req %02X error %d\n", request, ret); 80 81 return ret; 82 } 83 84 static int vicam_set_camera_power(struct gspca_dev *gspca_dev, int state) 85 { 86 int ret; 87 88 ret = vicam_control_msg(gspca_dev, 0x50, state, 0, NULL, 0); 89 if (ret < 0) 90 return ret; 91 92 if (state) 93 ret = vicam_control_msg(gspca_dev, 0x55, 1, 0, NULL, 0); 94 95 return ret; 96 } 97 98 /* 99 * request and read a block of data 100 */ 101 static int vicam_read_frame(struct gspca_dev *gspca_dev, u8 *data, int size) 102 { 103 int ret, unscaled_height, act_len = 0; 104 u8 *req_data = gspca_dev->usb_buf; 105 s32 expo = v4l2_ctrl_g_ctrl(gspca_dev->exposure); 106 s32 gain = v4l2_ctrl_g_ctrl(gspca_dev->gain); 107 108 memset(req_data, 0, 16); 109 req_data[0] = gain; 110 if (gspca_dev->pixfmt.width == 256) 111 req_data[1] |= 0x01; /* low nibble x-scale */ 112 if (gspca_dev->pixfmt.height <= 122) { 113 req_data[1] |= 0x10; /* high nibble y-scale */ 114 unscaled_height = gspca_dev->pixfmt.height * 2; 115 } else 116 unscaled_height = gspca_dev->pixfmt.height; 117 req_data[2] = 0x90; /* unknown, does not seem to do anything */ 118 if (unscaled_height <= 200) 119 req_data[3] = 0x06; /* vend? */ 120 else if (unscaled_height <= 242) /* Yes 242 not 240 */ 121 req_data[3] = 0x07; /* vend? */ 122 else /* Up to 244 lines with req_data[3] == 0x08 */ 123 req_data[3] = 0x08; /* vend? */ 124 125 if (expo < 256) { 126 /* Frame rate maxed out, use partial frame expo time */ 127 req_data[4] = 255 - expo; 128 req_data[5] = 0x00; 129 req_data[6] = 0x00; 130 req_data[7] = 0x01; 131 } else { 132 /* Modify frame rate */ 133 req_data[4] = 0x00; 134 req_data[5] = 0x00; 135 req_data[6] = expo & 0xFF; 136 req_data[7] = expo >> 8; 137 } 138 req_data[8] = ((244 - unscaled_height) / 2) & ~0x01; /* vstart */ 139 /* bytes 9-15 do not seem to affect exposure or image quality */ 140 141 mutex_lock(&gspca_dev->usb_lock); 142 ret = vicam_control_msg(gspca_dev, 0x51, 0x80, 0, req_data, 16); 143 mutex_unlock(&gspca_dev->usb_lock); 144 if (ret < 0) 145 return ret; 146 147 ret = usb_bulk_msg(gspca_dev->dev, 148 usb_rcvbulkpipe(gspca_dev->dev, 0x81), 149 data, size, &act_len, 10000); 150 /* successful, it returns 0, otherwise negative */ 151 if (ret < 0 || act_len != size) { 152 pr_err("bulk read fail (%d) len %d/%d\n", 153 ret, act_len, size); 154 return -EIO; 155 } 156 return 0; 157 } 158 159 /* 160 * This function is called as a workqueue function and runs whenever the camera 161 * is streaming data. Because it is a workqueue function it is allowed to sleep 162 * so we can use synchronous USB calls. To avoid possible collisions with other 163 * threads attempting to use gspca_dev->usb_buf we take the usb_lock when 164 * performing USB operations using it. In practice we don't really need this 165 * as the cameras controls are only written from the workqueue. 166 */ 167 static void vicam_dostream(struct work_struct *work) 168 { 169 struct sd *sd = container_of(work, struct sd, work_struct); 170 struct gspca_dev *gspca_dev = &sd->gspca_dev; 171 int ret, frame_sz; 172 u8 *buffer; 173 174 frame_sz = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].sizeimage + 175 HEADER_SIZE; 176 buffer = kmalloc(frame_sz, GFP_KERNEL); 177 if (!buffer) { 178 pr_err("Couldn't allocate USB buffer\n"); 179 goto exit; 180 } 181 182 while (gspca_dev->present && gspca_dev->streaming) { 183 #ifdef CONFIG_PM 184 if (gspca_dev->frozen) 185 break; 186 #endif 187 ret = vicam_read_frame(gspca_dev, buffer, frame_sz); 188 if (ret < 0) 189 break; 190 191 /* Note the frame header contents seem to be completely 192 constant, they do not change with either image, or 193 settings. So we simply discard it. The frames have 194 a very similar 64 byte footer, which we don't even 195 bother reading from the cam */ 196 gspca_frame_add(gspca_dev, FIRST_PACKET, 197 buffer + HEADER_SIZE, 198 frame_sz - HEADER_SIZE); 199 gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0); 200 } 201 exit: 202 kfree(buffer); 203 } 204 205 /* This function is called at probe time just before sd_init */ 206 static int sd_config(struct gspca_dev *gspca_dev, 207 const struct usb_device_id *id) 208 { 209 struct cam *cam = &gspca_dev->cam; 210 struct sd *sd = (struct sd *)gspca_dev; 211 212 /* We don't use the buffer gspca allocates so make it small. */ 213 cam->bulk = 1; 214 cam->bulk_size = 64; 215 cam->cam_mode = vicam_mode; 216 cam->nmodes = ARRAY_SIZE(vicam_mode); 217 218 INIT_WORK(&sd->work_struct, vicam_dostream); 219 220 return 0; 221 } 222 223 /* this function is called at probe and resume time */ 224 static int sd_init(struct gspca_dev *gspca_dev) 225 { 226 int ret; 227 const struct ihex_binrec *rec; 228 const struct firmware *fw; 229 u8 *firmware_buf; 230 231 ret = request_ihex_firmware(&fw, VICAM_FIRMWARE, 232 &gspca_dev->dev->dev); 233 if (ret) { 234 pr_err("Failed to load \"vicam/firmware.fw\": %d\n", ret); 235 return ret; 236 } 237 238 firmware_buf = kmalloc(PAGE_SIZE, GFP_KERNEL); 239 if (!firmware_buf) { 240 ret = -ENOMEM; 241 goto exit; 242 } 243 for (rec = (void *)fw->data; rec; rec = ihex_next_binrec(rec)) { 244 memcpy(firmware_buf, rec->data, be16_to_cpu(rec->len)); 245 ret = vicam_control_msg(gspca_dev, 0xff, 0, 0, firmware_buf, 246 be16_to_cpu(rec->len)); 247 if (ret < 0) 248 break; 249 } 250 251 kfree(firmware_buf); 252 exit: 253 release_firmware(fw); 254 return ret; 255 } 256 257 /* Set up for getting frames. */ 258 static int sd_start(struct gspca_dev *gspca_dev) 259 { 260 struct sd *sd = (struct sd *)gspca_dev; 261 int ret; 262 263 ret = vicam_set_camera_power(gspca_dev, 1); 264 if (ret < 0) 265 return ret; 266 267 schedule_work(&sd->work_struct); 268 269 return 0; 270 } 271 272 /* called on streamoff with alt==0 and on disconnect */ 273 /* the usb_lock is held at entry - restore on exit */ 274 static void sd_stop0(struct gspca_dev *gspca_dev) 275 { 276 struct sd *dev = (struct sd *)gspca_dev; 277 278 /* wait for the work queue to terminate */ 279 mutex_unlock(&gspca_dev->usb_lock); 280 /* This waits for vicam_dostream to finish */ 281 flush_work(&dev->work_struct); 282 mutex_lock(&gspca_dev->usb_lock); 283 284 if (gspca_dev->present) 285 vicam_set_camera_power(gspca_dev, 0); 286 } 287 288 static int sd_init_controls(struct gspca_dev *gspca_dev) 289 { 290 struct v4l2_ctrl_handler *hdl = &gspca_dev->ctrl_handler; 291 292 gspca_dev->vdev.ctrl_handler = hdl; 293 v4l2_ctrl_handler_init(hdl, 2); 294 gspca_dev->exposure = v4l2_ctrl_new_std(hdl, NULL, 295 V4L2_CID_EXPOSURE, 0, 2047, 1, 256); 296 gspca_dev->gain = v4l2_ctrl_new_std(hdl, NULL, 297 V4L2_CID_GAIN, 0, 255, 1, 200); 298 299 if (hdl->error) { 300 pr_err("Could not initialize controls\n"); 301 return hdl->error; 302 } 303 return 0; 304 } 305 306 /* Table of supported USB devices */ 307 static const struct usb_device_id device_table[] = { 308 {USB_DEVICE(0x04c1, 0x009d)}, 309 {USB_DEVICE(0x0602, 0x1001)}, 310 {} 311 }; 312 313 MODULE_DEVICE_TABLE(usb, device_table); 314 315 /* sub-driver description */ 316 static const struct sd_desc sd_desc = { 317 .name = MODULE_NAME, 318 .config = sd_config, 319 .init = sd_init, 320 .init_controls = sd_init_controls, 321 .start = sd_start, 322 .stop0 = sd_stop0, 323 }; 324 325 /* -- device connect -- */ 326 static int sd_probe(struct usb_interface *intf, 327 const struct usb_device_id *id) 328 { 329 return gspca_dev_probe(intf, id, 330 &sd_desc, 331 sizeof(struct sd), 332 THIS_MODULE); 333 } 334 335 static struct usb_driver sd_driver = { 336 .name = MODULE_NAME, 337 .id_table = device_table, 338 .probe = sd_probe, 339 .disconnect = gspca_disconnect, 340 #ifdef CONFIG_PM 341 .suspend = gspca_suspend, 342 .resume = gspca_resume, 343 .reset_resume = gspca_resume, 344 #endif 345 }; 346 347 module_usb_driver(sd_driver); 348