1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Driver for USB webcams based on Konica chipset. This 4 * chipset is used in Intel YC76 camera. 5 * 6 * Copyright (C) 2010 Hans de Goede <hdegoede@redhat.com> 7 * 8 * Based on the usbvideo v4l1 konicawc driver which is: 9 * 10 * Copyright (C) 2002 Simon Evans <spse@secret.org.uk> 11 * 12 * The code for making gspca work with a webcam with 2 isoc endpoints was 13 * taken from the benq gspca subdriver which is: 14 * 15 * Copyright (C) 2009 Jean-Francois Moine (http://moinejf.free.fr) 16 */ 17 18 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 19 20 #define MODULE_NAME "konica" 21 22 #include <linux/input.h> 23 #include "gspca.h" 24 25 MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); 26 MODULE_DESCRIPTION("Konica chipset USB Camera Driver"); 27 MODULE_LICENSE("GPL"); 28 29 #define WHITEBAL_REG 0x01 30 #define BRIGHTNESS_REG 0x02 31 #define SHARPNESS_REG 0x03 32 #define CONTRAST_REG 0x04 33 #define SATURATION_REG 0x05 34 35 /* specific webcam descriptor */ 36 struct sd { 37 struct gspca_dev gspca_dev; /* !! must be the first item */ 38 struct urb *last_data_urb; 39 u8 snapshot_pressed; 40 }; 41 42 43 /* .priv is what goes to register 8 for this mode, known working values: 44 0x00 -> 176x144, cropped 45 0x01 -> 176x144, cropped 46 0x02 -> 176x144, cropped 47 0x03 -> 176x144, cropped 48 0x04 -> 176x144, binned 49 0x05 -> 320x240 50 0x06 -> 320x240 51 0x07 -> 160x120, cropped 52 0x08 -> 160x120, cropped 53 0x09 -> 160x120, binned (note has 136 lines) 54 0x0a -> 160x120, binned (note has 136 lines) 55 0x0b -> 160x120, cropped 56 */ 57 static const struct v4l2_pix_format vga_mode[] = { 58 {160, 120, V4L2_PIX_FMT_KONICA420, V4L2_FIELD_NONE, 59 .bytesperline = 160, 60 .sizeimage = 160 * 136 * 3 / 2 + 960, 61 .colorspace = V4L2_COLORSPACE_SRGB, 62 .priv = 0x0a}, 63 {176, 144, V4L2_PIX_FMT_KONICA420, V4L2_FIELD_NONE, 64 .bytesperline = 176, 65 .sizeimage = 176 * 144 * 3 / 2 + 960, 66 .colorspace = V4L2_COLORSPACE_SRGB, 67 .priv = 0x04}, 68 {320, 240, V4L2_PIX_FMT_KONICA420, V4L2_FIELD_NONE, 69 .bytesperline = 320, 70 .sizeimage = 320 * 240 * 3 / 2 + 960, 71 .colorspace = V4L2_COLORSPACE_SRGB, 72 .priv = 0x05}, 73 }; 74 75 static void sd_isoc_irq(struct urb *urb); 76 77 static void reg_w(struct gspca_dev *gspca_dev, u16 value, u16 index) 78 { 79 struct usb_device *dev = gspca_dev->dev; 80 int ret; 81 82 if (gspca_dev->usb_err < 0) 83 return; 84 ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 85 0x02, 86 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 87 value, 88 index, 89 NULL, 90 0, 91 1000); 92 if (ret < 0) { 93 pr_err("reg_w err writing %02x to %02x: %d\n", 94 value, index, ret); 95 gspca_dev->usb_err = ret; 96 } 97 } 98 99 static void reg_r(struct gspca_dev *gspca_dev, u16 value, u16 index) 100 { 101 struct usb_device *dev = gspca_dev->dev; 102 int ret; 103 104 if (gspca_dev->usb_err < 0) 105 return; 106 ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), 107 0x03, 108 USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 109 value, 110 index, 111 gspca_dev->usb_buf, 112 2, 113 1000); 114 if (ret < 0) { 115 pr_err("reg_r err %d\n", ret); 116 gspca_dev->usb_err = ret; 117 /* 118 * Make sure the buffer is zeroed to avoid uninitialized 119 * values. 120 */ 121 memset(gspca_dev->usb_buf, 0, 2); 122 } 123 } 124 125 static void konica_stream_on(struct gspca_dev *gspca_dev) 126 { 127 reg_w(gspca_dev, 1, 0x0b); 128 } 129 130 static void konica_stream_off(struct gspca_dev *gspca_dev) 131 { 132 reg_w(gspca_dev, 0, 0x0b); 133 } 134 135 /* this function is called at probe time */ 136 static int sd_config(struct gspca_dev *gspca_dev, 137 const struct usb_device_id *id) 138 { 139 gspca_dev->cam.cam_mode = vga_mode; 140 gspca_dev->cam.nmodes = ARRAY_SIZE(vga_mode); 141 gspca_dev->cam.no_urb_create = 1; 142 143 return 0; 144 } 145 146 /* this function is called at probe and resume time */ 147 static int sd_init(struct gspca_dev *gspca_dev) 148 { 149 int i; 150 151 /* 152 * The konica needs a freaking large time to "boot" (approx 6.5 sec.), 153 * and does not want to be bothered while doing so :| 154 * Register 0x10 counts from 1 - 3, with 3 being "ready" 155 */ 156 msleep(6000); 157 for (i = 0; i < 20; i++) { 158 reg_r(gspca_dev, 0, 0x10); 159 if (gspca_dev->usb_buf[0] == 3) 160 break; 161 msleep(100); 162 } 163 reg_w(gspca_dev, 0, 0x0d); 164 165 return gspca_dev->usb_err; 166 } 167 168 static int sd_start(struct gspca_dev *gspca_dev) 169 { 170 struct sd *sd = (struct sd *) gspca_dev; 171 struct urb *urb; 172 int i, n, packet_size; 173 struct usb_host_interface *alt; 174 struct usb_interface *intf; 175 176 intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface); 177 alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt); 178 if (!alt) { 179 pr_err("Couldn't get altsetting\n"); 180 return -EIO; 181 } 182 183 if (alt->desc.bNumEndpoints < 2) 184 return -ENODEV; 185 186 packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize); 187 188 n = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv; 189 reg_w(gspca_dev, n, 0x08); 190 191 konica_stream_on(gspca_dev); 192 193 if (gspca_dev->usb_err) 194 return gspca_dev->usb_err; 195 196 /* create 4 URBs - 2 on endpoint 0x83 and 2 on 0x082 */ 197 #if MAX_NURBS < 4 198 #error "Not enough URBs in the gspca table" 199 #endif 200 #define SD_NPKT 32 201 for (n = 0; n < 4; n++) { 202 i = n & 1 ? 0 : 1; 203 packet_size = 204 le16_to_cpu(alt->endpoint[i].desc.wMaxPacketSize); 205 urb = usb_alloc_urb(SD_NPKT, GFP_KERNEL); 206 if (!urb) 207 return -ENOMEM; 208 gspca_dev->urb[n] = urb; 209 urb->transfer_buffer = usb_alloc_coherent(gspca_dev->dev, 210 packet_size * SD_NPKT, 211 GFP_KERNEL, 212 &urb->transfer_dma); 213 if (urb->transfer_buffer == NULL) { 214 pr_err("usb_buffer_alloc failed\n"); 215 return -ENOMEM; 216 } 217 218 urb->dev = gspca_dev->dev; 219 urb->context = gspca_dev; 220 urb->transfer_buffer_length = packet_size * SD_NPKT; 221 urb->pipe = usb_rcvisocpipe(gspca_dev->dev, 222 n & 1 ? 0x81 : 0x82); 223 urb->transfer_flags = URB_ISO_ASAP 224 | URB_NO_TRANSFER_DMA_MAP; 225 urb->interval = 1; 226 urb->complete = sd_isoc_irq; 227 urb->number_of_packets = SD_NPKT; 228 for (i = 0; i < SD_NPKT; i++) { 229 urb->iso_frame_desc[i].length = packet_size; 230 urb->iso_frame_desc[i].offset = packet_size * i; 231 } 232 } 233 234 return 0; 235 } 236 237 static void sd_stopN(struct gspca_dev *gspca_dev) 238 { 239 struct sd *sd __maybe_unused = (struct sd *) gspca_dev; 240 241 konica_stream_off(gspca_dev); 242 #if IS_ENABLED(CONFIG_INPUT) 243 /* Don't keep the button in the pressed state "forever" if it was 244 pressed when streaming is stopped */ 245 if (sd->snapshot_pressed) { 246 input_report_key(gspca_dev->input_dev, KEY_CAMERA, 0); 247 input_sync(gspca_dev->input_dev); 248 sd->snapshot_pressed = 0; 249 } 250 #endif 251 } 252 253 /* reception of an URB */ 254 static void sd_isoc_irq(struct urb *urb) 255 { 256 struct gspca_dev *gspca_dev = (struct gspca_dev *) urb->context; 257 struct sd *sd = (struct sd *) gspca_dev; 258 struct urb *data_urb, *status_urb; 259 u8 *data; 260 int i, st; 261 262 gspca_dbg(gspca_dev, D_PACK, "sd isoc irq\n"); 263 if (!gspca_dev->streaming) 264 return; 265 266 if (urb->status != 0) { 267 if (urb->status == -ESHUTDOWN) 268 return; /* disconnection */ 269 #ifdef CONFIG_PM 270 if (gspca_dev->frozen) 271 return; 272 #endif 273 gspca_err(gspca_dev, "urb status: %d\n", urb->status); 274 st = usb_submit_urb(urb, GFP_ATOMIC); 275 if (st < 0) 276 pr_err("resubmit urb error %d\n", st); 277 return; 278 } 279 280 /* if this is a data URB (ep 0x82), wait */ 281 if (urb->transfer_buffer_length > 32) { 282 sd->last_data_urb = urb; 283 return; 284 } 285 286 status_urb = urb; 287 data_urb = sd->last_data_urb; 288 sd->last_data_urb = NULL; 289 290 if (!data_urb || data_urb->start_frame != status_urb->start_frame) { 291 gspca_err(gspca_dev, "lost sync on frames\n"); 292 goto resubmit; 293 } 294 295 if (data_urb->number_of_packets != status_urb->number_of_packets) { 296 gspca_err(gspca_dev, "no packets does not match, data: %d, status: %d\n", 297 data_urb->number_of_packets, 298 status_urb->number_of_packets); 299 goto resubmit; 300 } 301 302 for (i = 0; i < status_urb->number_of_packets; i++) { 303 if (data_urb->iso_frame_desc[i].status || 304 status_urb->iso_frame_desc[i].status) { 305 gspca_err(gspca_dev, "pkt %d data-status %d, status-status %d\n", 306 i, 307 data_urb->iso_frame_desc[i].status, 308 status_urb->iso_frame_desc[i].status); 309 gspca_dev->last_packet_type = DISCARD_PACKET; 310 continue; 311 } 312 313 if (status_urb->iso_frame_desc[i].actual_length != 1) { 314 gspca_err(gspca_dev, "bad status packet length %d\n", 315 status_urb->iso_frame_desc[i].actual_length); 316 gspca_dev->last_packet_type = DISCARD_PACKET; 317 continue; 318 } 319 320 st = *((u8 *)status_urb->transfer_buffer 321 + status_urb->iso_frame_desc[i].offset); 322 323 data = (u8 *)data_urb->transfer_buffer 324 + data_urb->iso_frame_desc[i].offset; 325 326 /* st: 0x80-0xff: frame start with frame number (ie 0-7f) 327 * otherwise: 328 * bit 0 0: keep packet 329 * 1: drop packet (padding data) 330 * 331 * bit 4 0 button not clicked 332 * 1 button clicked 333 * button is used to `take a picture' (in software) 334 */ 335 if (st & 0x80) { 336 gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0); 337 gspca_frame_add(gspca_dev, FIRST_PACKET, NULL, 0); 338 } else { 339 #if IS_ENABLED(CONFIG_INPUT) 340 u8 button_state = st & 0x40 ? 1 : 0; 341 if (sd->snapshot_pressed != button_state) { 342 input_report_key(gspca_dev->input_dev, 343 KEY_CAMERA, 344 button_state); 345 input_sync(gspca_dev->input_dev); 346 sd->snapshot_pressed = button_state; 347 } 348 #endif 349 if (st & 0x01) 350 continue; 351 } 352 gspca_frame_add(gspca_dev, INTER_PACKET, data, 353 data_urb->iso_frame_desc[i].actual_length); 354 } 355 356 resubmit: 357 if (data_urb) { 358 st = usb_submit_urb(data_urb, GFP_ATOMIC); 359 if (st < 0) 360 gspca_err(gspca_dev, "usb_submit_urb(data_urb) ret %d\n", 361 st); 362 } 363 st = usb_submit_urb(status_urb, GFP_ATOMIC); 364 if (st < 0) 365 gspca_err(gspca_dev, "usb_submit_urb(status_urb) ret %d\n", st); 366 } 367 368 static int sd_s_ctrl(struct v4l2_ctrl *ctrl) 369 { 370 struct gspca_dev *gspca_dev = 371 container_of(ctrl->handler, struct gspca_dev, ctrl_handler); 372 373 gspca_dev->usb_err = 0; 374 375 if (!gspca_dev->streaming) 376 return 0; 377 378 switch (ctrl->id) { 379 case V4L2_CID_BRIGHTNESS: 380 konica_stream_off(gspca_dev); 381 reg_w(gspca_dev, ctrl->val, BRIGHTNESS_REG); 382 konica_stream_on(gspca_dev); 383 break; 384 case V4L2_CID_CONTRAST: 385 konica_stream_off(gspca_dev); 386 reg_w(gspca_dev, ctrl->val, CONTRAST_REG); 387 konica_stream_on(gspca_dev); 388 break; 389 case V4L2_CID_SATURATION: 390 konica_stream_off(gspca_dev); 391 reg_w(gspca_dev, ctrl->val, SATURATION_REG); 392 konica_stream_on(gspca_dev); 393 break; 394 case V4L2_CID_WHITE_BALANCE_TEMPERATURE: 395 konica_stream_off(gspca_dev); 396 reg_w(gspca_dev, ctrl->val, WHITEBAL_REG); 397 konica_stream_on(gspca_dev); 398 break; 399 case V4L2_CID_SHARPNESS: 400 konica_stream_off(gspca_dev); 401 reg_w(gspca_dev, ctrl->val, SHARPNESS_REG); 402 konica_stream_on(gspca_dev); 403 break; 404 } 405 return gspca_dev->usb_err; 406 } 407 408 static const struct v4l2_ctrl_ops sd_ctrl_ops = { 409 .s_ctrl = sd_s_ctrl, 410 }; 411 412 static int sd_init_controls(struct gspca_dev *gspca_dev) 413 { 414 struct v4l2_ctrl_handler *hdl = &gspca_dev->ctrl_handler; 415 416 gspca_dev->vdev.ctrl_handler = hdl; 417 v4l2_ctrl_handler_init(hdl, 5); 418 v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, 419 V4L2_CID_BRIGHTNESS, 0, 9, 1, 4); 420 /* Needs to be verified */ 421 v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, 422 V4L2_CID_CONTRAST, 0, 9, 1, 4); 423 v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, 424 V4L2_CID_SATURATION, 0, 9, 1, 4); 425 v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, 426 V4L2_CID_WHITE_BALANCE_TEMPERATURE, 427 0, 33, 1, 25); 428 v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, 429 V4L2_CID_SHARPNESS, 0, 9, 1, 4); 430 431 if (hdl->error) { 432 pr_err("Could not initialize controls\n"); 433 return hdl->error; 434 } 435 return 0; 436 } 437 438 /* sub-driver description */ 439 static const struct sd_desc sd_desc = { 440 .name = MODULE_NAME, 441 .config = sd_config, 442 .init = sd_init, 443 .init_controls = sd_init_controls, 444 .start = sd_start, 445 .stopN = sd_stopN, 446 #if IS_ENABLED(CONFIG_INPUT) 447 .other_input = 1, 448 #endif 449 }; 450 451 /* -- module initialisation -- */ 452 static const struct usb_device_id device_table[] = { 453 {USB_DEVICE(0x04c8, 0x0720)}, /* Intel YC 76 */ 454 {} 455 }; 456 MODULE_DEVICE_TABLE(usb, device_table); 457 458 /* -- device connect -- */ 459 static int sd_probe(struct usb_interface *intf, 460 const struct usb_device_id *id) 461 { 462 return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), 463 THIS_MODULE); 464 } 465 466 static struct usb_driver sd_driver = { 467 .name = MODULE_NAME, 468 .id_table = device_table, 469 .probe = sd_probe, 470 .disconnect = gspca_disconnect, 471 #ifdef CONFIG_PM 472 .suspend = gspca_suspend, 473 .resume = gspca_resume, 474 .reset_resume = gspca_resume, 475 #endif 476 }; 477 478 module_usb_driver(sd_driver); 479