xref: /openbmc/linux/drivers/media/usb/gspca/gspca.h (revision d0b73b48)
1 #ifndef GSPCAV2_H
2 #define GSPCAV2_H
3 
4 #include <linux/module.h>
5 #include <linux/kernel.h>
6 #include <linux/usb.h>
7 #include <linux/videodev2.h>
8 #include <media/v4l2-common.h>
9 #include <media/v4l2-ctrls.h>
10 #include <media/v4l2-device.h>
11 #include <linux/mutex.h>
12 
13 /* compilation option */
14 /*#define GSPCA_DEBUG 1*/
15 
16 #ifdef GSPCA_DEBUG
17 /* GSPCA our debug messages */
18 extern int gspca_debug;
19 #define PDEBUG(level, fmt, ...)					\
20 do {								\
21 	if (gspca_debug & (level))				\
22 		pr_info(fmt, ##__VA_ARGS__);			\
23 } while (0)
24 
25 #define D_ERR  0x01
26 #define D_PROBE 0x02
27 #define D_CONF 0x04
28 #define D_STREAM 0x08
29 #define D_FRAM 0x10
30 #define D_PACK 0x20
31 #define D_USBI 0x00
32 #define D_USBO 0x00
33 #define D_V4L2 0x0100
34 #else
35 #define PDEBUG(level, fmt, ...) do {} while(0)
36 #endif
37 
38 #define GSPCA_MAX_FRAMES 16	/* maximum number of video frame buffers */
39 /* image transfers */
40 #define MAX_NURBS 4		/* max number of URBs */
41 
42 
43 /* used to list framerates supported by a camera mode (resolution) */
44 struct framerates {
45 	const u8 *rates;
46 	int nrates;
47 };
48 
49 /* control definition */
50 struct gspca_ctrl {
51 	s16 val;	/* current value */
52 	s16 def;	/* default value */
53 	s16 min, max;	/* minimum and maximum values */
54 };
55 
56 /* device information - set at probe time */
57 struct cam {
58 	const struct v4l2_pix_format *cam_mode;	/* size nmodes */
59 	const struct framerates *mode_framerates; /* must have size nmodes,
60 						   * just like cam_mode */
61 	struct gspca_ctrl *ctrls;	/* control table - size nctrls */
62 					/* may be NULL */
63 	u32 bulk_size;		/* buffer size when image transfer by bulk */
64 	u32 input_flags;	/* value for ENUM_INPUT status flags */
65 	u8 nmodes;		/* size of cam_mode */
66 	u8 no_urb_create;	/* don't create transfer URBs */
67 	u8 bulk_nurbs;		/* number of URBs in bulk mode
68 				 * - cannot be > MAX_NURBS
69 				 * - when 0 and bulk_size != 0 means
70 				 *   1 URB and submit done by subdriver */
71 	u8 bulk;		/* image transfer by 0:isoc / 1:bulk */
72 	u8 npkt;		/* number of packets in an ISOC message
73 				 * 0 is the default value: 32 packets */
74 	u8 needs_full_bandwidth;/* Set this flag to notify the bandwidth calc.
75 				 * code that the cam fills all image buffers to
76 				 * the max, even when using compression. */
77 };
78 
79 struct gspca_dev;
80 struct gspca_frame;
81 
82 /* subdriver operations */
83 typedef int (*cam_op) (struct gspca_dev *);
84 typedef void (*cam_v_op) (struct gspca_dev *);
85 typedef int (*cam_cf_op) (struct gspca_dev *, const struct usb_device_id *);
86 typedef int (*cam_get_jpg_op) (struct gspca_dev *,
87 				struct v4l2_jpegcompression *);
88 typedef int (*cam_set_jpg_op) (struct gspca_dev *,
89 				const struct v4l2_jpegcompression *);
90 typedef int (*cam_reg_op) (struct gspca_dev *,
91 				struct v4l2_dbg_register *);
92 typedef int (*cam_ident_op) (struct gspca_dev *,
93 				struct v4l2_dbg_chip_ident *);
94 typedef void (*cam_streamparm_op) (struct gspca_dev *,
95 				  struct v4l2_streamparm *);
96 typedef int (*cam_qmnu_op) (struct gspca_dev *,
97 			struct v4l2_querymenu *);
98 typedef void (*cam_pkt_op) (struct gspca_dev *gspca_dev,
99 				u8 *data,
100 				int len);
101 typedef int (*cam_int_pkt_op) (struct gspca_dev *gspca_dev,
102 				u8 *data,
103 				int len);
104 
105 struct ctrl {
106 	struct v4l2_queryctrl qctrl;
107 	int (*set)(struct gspca_dev *, __s32);
108 	int (*get)(struct gspca_dev *, __s32 *);
109 	cam_v_op set_control;
110 };
111 
112 /* subdriver description */
113 struct sd_desc {
114 /* information */
115 	const char *name;	/* sub-driver name */
116 /* controls */
117 	const struct ctrl *ctrls;	/* static control definition */
118 	int nctrls;
119 /* mandatory operations */
120 	cam_cf_op config;	/* called on probe */
121 	cam_op init;		/* called on probe and resume */
122 	cam_op init_controls;	/* called on probe */
123 	cam_op start;		/* called on stream on after URBs creation */
124 	cam_pkt_op pkt_scan;
125 /* optional operations */
126 	cam_op isoc_init;	/* called on stream on before getting the EP */
127 	cam_op isoc_nego;	/* called when URB submit failed with NOSPC */
128 	cam_v_op stopN;		/* called on stream off - main alt */
129 	cam_v_op stop0;		/* called on stream off & disconnect - alt 0 */
130 	cam_v_op dq_callback;	/* called when a frame has been dequeued */
131 	cam_get_jpg_op get_jcomp;
132 	cam_set_jpg_op set_jcomp;
133 	cam_qmnu_op querymenu;
134 	cam_streamparm_op get_streamparm;
135 	cam_streamparm_op set_streamparm;
136 #ifdef CONFIG_VIDEO_ADV_DEBUG
137 	cam_reg_op set_register;
138 	cam_reg_op get_register;
139 #endif
140 	cam_ident_op get_chip_ident;
141 #if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
142 	cam_int_pkt_op int_pkt_scan;
143 	/* other_input makes the gspca core create gspca_dev->input even when
144 	   int_pkt_scan is NULL, for cams with non interrupt driven buttons */
145 	u8 other_input;
146 #endif
147 };
148 
149 /* packet types when moving from iso buf to frame buf */
150 enum gspca_packet_type {
151 	DISCARD_PACKET,
152 	FIRST_PACKET,
153 	INTER_PACKET,
154 	LAST_PACKET
155 };
156 
157 struct gspca_frame {
158 	__u8 *data;			/* frame buffer */
159 	int vma_use_count;
160 	struct v4l2_buffer v4l2_buf;
161 };
162 
163 struct gspca_dev {
164 	struct video_device vdev;	/* !! must be the first item */
165 	struct module *module;		/* subdriver handling the device */
166 	struct v4l2_device v4l2_dev;
167 	struct usb_device *dev;
168 	struct file *capt_file;		/* file doing video capture */
169 					/* protected by queue_lock */
170 #if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
171 	struct input_dev *input_dev;
172 	char phys[64];			/* physical device path */
173 #endif
174 
175 	struct cam cam;				/* device information */
176 	const struct sd_desc *sd_desc;		/* subdriver description */
177 	unsigned ctrl_dis;		/* disabled controls (bit map) */
178 	unsigned ctrl_inac;		/* inactive controls (bit map) */
179 	struct v4l2_ctrl_handler ctrl_handler;
180 
181 	/* autogain and exposure or gain control cluster, these are global as
182 	   the autogain/exposure functions in autogain_functions.c use them */
183 	struct {
184 		struct v4l2_ctrl *autogain;
185 		struct v4l2_ctrl *exposure;
186 		struct v4l2_ctrl *gain;
187 		int exp_too_low_cnt, exp_too_high_cnt;
188 	};
189 
190 #define USB_BUF_SZ 64
191 	__u8 *usb_buf;				/* buffer for USB exchanges */
192 	struct urb *urb[MAX_NURBS];
193 #if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
194 	struct urb *int_urb;
195 #endif
196 
197 	__u8 *frbuf;				/* buffer for nframes */
198 	struct gspca_frame frame[GSPCA_MAX_FRAMES];
199 	u8 *image;				/* image beeing filled */
200 	__u32 frsz;				/* frame size */
201 	u32 image_len;				/* current length of image */
202 	atomic_t fr_q;				/* next frame to queue */
203 	atomic_t fr_i;				/* frame being filled */
204 	signed char fr_queue[GSPCA_MAX_FRAMES];	/* frame queue */
205 	char nframes;				/* number of frames */
206 	u8 fr_o;				/* next frame to dequeue */
207 	__u8 last_packet_type;
208 	__s8 empty_packet;		/* if (-1) don't check empty packets */
209 	__u8 streaming;			/* protected by both mutexes (*) */
210 
211 	__u8 curr_mode;			/* current camera mode */
212 	__u32 pixfmt;			/* current mode parameters */
213 	__u16 width;
214 	__u16 height;
215 	__u32 sequence;			/* frame sequence number */
216 
217 	wait_queue_head_t wq;		/* wait queue */
218 	struct mutex usb_lock;		/* usb exchange protection */
219 	struct mutex queue_lock;	/* ISOC queue protection */
220 	int usb_err;			/* USB error - protected by usb_lock */
221 	u16 pkt_size;			/* ISOC packet size */
222 #ifdef CONFIG_PM
223 	char frozen;			/* suspend - resume */
224 #endif
225 	char present;			/* device connected */
226 	char nbufread;			/* number of buffers for read() */
227 	char memory;			/* memory type (V4L2_MEMORY_xxx) */
228 	__u8 iface;			/* USB interface number */
229 	__u8 alt;			/* USB alternate setting */
230 	u8 audio;			/* presence of audio device */
231 
232 	/* (*) These variables are proteced by both usb_lock and queue_lock,
233 	   that is any code setting them is holding *both*, which means that
234 	   any code getting them needs to hold at least one of them */
235 };
236 
237 int gspca_dev_probe(struct usb_interface *intf,
238 		const struct usb_device_id *id,
239 		const struct sd_desc *sd_desc,
240 		int dev_size,
241 		struct module *module);
242 int gspca_dev_probe2(struct usb_interface *intf,
243 		const struct usb_device_id *id,
244 		const struct sd_desc *sd_desc,
245 		int dev_size,
246 		struct module *module);
247 void gspca_disconnect(struct usb_interface *intf);
248 void gspca_frame_add(struct gspca_dev *gspca_dev,
249 			enum gspca_packet_type packet_type,
250 			const u8 *data,
251 			int len);
252 #ifdef CONFIG_PM
253 int gspca_suspend(struct usb_interface *intf, pm_message_t message);
254 int gspca_resume(struct usb_interface *intf);
255 #endif
256 int gspca_expo_autogain(struct gspca_dev *gspca_dev, int avg_lum,
257 	int desired_avg_lum, int deadzone, int gain_knee, int exposure_knee);
258 int gspca_coarse_grained_expo_autogain(struct gspca_dev *gspca_dev,
259         int avg_lum, int desired_avg_lum, int deadzone);
260 
261 #endif /* GSPCAV2_H */
262