1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * cpia CPiA (1) gspca driver 4 * 5 * Copyright (C) 2010-2011 Hans de Goede <hdegoede@redhat.com> 6 * 7 * This module is adapted from the in kernel v4l1 cpia driver which is : 8 * 9 * (C) Copyright 1999-2000 Peter Pregler 10 * (C) Copyright 1999-2000 Scott J. Bertin 11 * (C) Copyright 1999-2000 Johannes Erdfelt <johannes@erdfelt.com> 12 * (C) Copyright 2000 STMicroelectronics 13 */ 14 15 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 16 17 #define MODULE_NAME "cpia1" 18 19 #include <linux/input.h> 20 #include <linux/sched/signal.h> 21 22 #include "gspca.h" 23 24 MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); 25 MODULE_DESCRIPTION("Vision CPiA"); 26 MODULE_LICENSE("GPL"); 27 28 /* constant value's */ 29 #define MAGIC_0 0x19 30 #define MAGIC_1 0x68 31 #define DATA_IN 0xc0 32 #define DATA_OUT 0x40 33 #define VIDEOSIZE_QCIF 0 /* 176x144 */ 34 #define VIDEOSIZE_CIF 1 /* 352x288 */ 35 #define SUBSAMPLE_420 0 36 #define SUBSAMPLE_422 1 37 #define YUVORDER_YUYV 0 38 #define YUVORDER_UYVY 1 39 #define NOT_COMPRESSED 0 40 #define COMPRESSED 1 41 #define NO_DECIMATION 0 42 #define DECIMATION_ENAB 1 43 #define EOI 0xff /* End Of Image */ 44 #define EOL 0xfd /* End Of Line */ 45 #define FRAME_HEADER_SIZE 64 46 47 /* Image grab modes */ 48 #define CPIA_GRAB_SINGLE 0 49 #define CPIA_GRAB_CONTINEOUS 1 50 51 /* Compression parameters */ 52 #define CPIA_COMPRESSION_NONE 0 53 #define CPIA_COMPRESSION_AUTO 1 54 #define CPIA_COMPRESSION_MANUAL 2 55 #define CPIA_COMPRESSION_TARGET_QUALITY 0 56 #define CPIA_COMPRESSION_TARGET_FRAMERATE 1 57 58 /* Return offsets for GetCameraState */ 59 #define SYSTEMSTATE 0 60 #define GRABSTATE 1 61 #define STREAMSTATE 2 62 #define FATALERROR 3 63 #define CMDERROR 4 64 #define DEBUGFLAGS 5 65 #define VPSTATUS 6 66 #define ERRORCODE 7 67 68 /* SystemState */ 69 #define UNINITIALISED_STATE 0 70 #define PASS_THROUGH_STATE 1 71 #define LO_POWER_STATE 2 72 #define HI_POWER_STATE 3 73 #define WARM_BOOT_STATE 4 74 75 /* GrabState */ 76 #define GRAB_IDLE 0 77 #define GRAB_ACTIVE 1 78 #define GRAB_DONE 2 79 80 /* StreamState */ 81 #define STREAM_NOT_READY 0 82 #define STREAM_READY 1 83 #define STREAM_OPEN 2 84 #define STREAM_PAUSED 3 85 #define STREAM_FINISHED 4 86 87 /* Fatal Error, CmdError, and DebugFlags */ 88 #define CPIA_FLAG 1 89 #define SYSTEM_FLAG 2 90 #define INT_CTRL_FLAG 4 91 #define PROCESS_FLAG 8 92 #define COM_FLAG 16 93 #define VP_CTRL_FLAG 32 94 #define CAPTURE_FLAG 64 95 #define DEBUG_FLAG 128 96 97 /* VPStatus */ 98 #define VP_STATE_OK 0x00 99 100 #define VP_STATE_FAILED_VIDEOINIT 0x01 101 #define VP_STATE_FAILED_AECACBINIT 0x02 102 #define VP_STATE_AEC_MAX 0x04 103 #define VP_STATE_ACB_BMAX 0x08 104 105 #define VP_STATE_ACB_RMIN 0x10 106 #define VP_STATE_ACB_GMIN 0x20 107 #define VP_STATE_ACB_RMAX 0x40 108 #define VP_STATE_ACB_GMAX 0x80 109 110 /* default (minimum) compensation values */ 111 #define COMP_RED 220 112 #define COMP_GREEN1 214 113 #define COMP_GREEN2 COMP_GREEN1 114 #define COMP_BLUE 230 115 116 /* exposure status */ 117 #define EXPOSURE_VERY_LIGHT 0 118 #define EXPOSURE_LIGHT 1 119 #define EXPOSURE_NORMAL 2 120 #define EXPOSURE_DARK 3 121 #define EXPOSURE_VERY_DARK 4 122 123 #define CPIA_MODULE_CPIA (0 << 5) 124 #define CPIA_MODULE_SYSTEM (1 << 5) 125 #define CPIA_MODULE_VP_CTRL (5 << 5) 126 #define CPIA_MODULE_CAPTURE (6 << 5) 127 #define CPIA_MODULE_DEBUG (7 << 5) 128 129 #define INPUT (DATA_IN << 8) 130 #define OUTPUT (DATA_OUT << 8) 131 132 #define CPIA_COMMAND_GetCPIAVersion (INPUT | CPIA_MODULE_CPIA | 1) 133 #define CPIA_COMMAND_GetPnPID (INPUT | CPIA_MODULE_CPIA | 2) 134 #define CPIA_COMMAND_GetCameraStatus (INPUT | CPIA_MODULE_CPIA | 3) 135 #define CPIA_COMMAND_GotoHiPower (OUTPUT | CPIA_MODULE_CPIA | 4) 136 #define CPIA_COMMAND_GotoLoPower (OUTPUT | CPIA_MODULE_CPIA | 5) 137 #define CPIA_COMMAND_GotoSuspend (OUTPUT | CPIA_MODULE_CPIA | 7) 138 #define CPIA_COMMAND_GotoPassThrough (OUTPUT | CPIA_MODULE_CPIA | 8) 139 #define CPIA_COMMAND_ModifyCameraStatus (OUTPUT | CPIA_MODULE_CPIA | 10) 140 141 #define CPIA_COMMAND_ReadVCRegs (INPUT | CPIA_MODULE_SYSTEM | 1) 142 #define CPIA_COMMAND_WriteVCReg (OUTPUT | CPIA_MODULE_SYSTEM | 2) 143 #define CPIA_COMMAND_ReadMCPorts (INPUT | CPIA_MODULE_SYSTEM | 3) 144 #define CPIA_COMMAND_WriteMCPort (OUTPUT | CPIA_MODULE_SYSTEM | 4) 145 #define CPIA_COMMAND_SetBaudRate (OUTPUT | CPIA_MODULE_SYSTEM | 5) 146 #define CPIA_COMMAND_SetECPTiming (OUTPUT | CPIA_MODULE_SYSTEM | 6) 147 #define CPIA_COMMAND_ReadIDATA (INPUT | CPIA_MODULE_SYSTEM | 7) 148 #define CPIA_COMMAND_WriteIDATA (OUTPUT | CPIA_MODULE_SYSTEM | 8) 149 #define CPIA_COMMAND_GenericCall (OUTPUT | CPIA_MODULE_SYSTEM | 9) 150 #define CPIA_COMMAND_I2CStart (OUTPUT | CPIA_MODULE_SYSTEM | 10) 151 #define CPIA_COMMAND_I2CStop (OUTPUT | CPIA_MODULE_SYSTEM | 11) 152 #define CPIA_COMMAND_I2CWrite (OUTPUT | CPIA_MODULE_SYSTEM | 12) 153 #define CPIA_COMMAND_I2CRead (INPUT | CPIA_MODULE_SYSTEM | 13) 154 155 #define CPIA_COMMAND_GetVPVersion (INPUT | CPIA_MODULE_VP_CTRL | 1) 156 #define CPIA_COMMAND_ResetFrameCounter (INPUT | CPIA_MODULE_VP_CTRL | 2) 157 #define CPIA_COMMAND_SetColourParams (OUTPUT | CPIA_MODULE_VP_CTRL | 3) 158 #define CPIA_COMMAND_SetExposure (OUTPUT | CPIA_MODULE_VP_CTRL | 4) 159 #define CPIA_COMMAND_SetColourBalance (OUTPUT | CPIA_MODULE_VP_CTRL | 6) 160 #define CPIA_COMMAND_SetSensorFPS (OUTPUT | CPIA_MODULE_VP_CTRL | 7) 161 #define CPIA_COMMAND_SetVPDefaults (OUTPUT | CPIA_MODULE_VP_CTRL | 8) 162 #define CPIA_COMMAND_SetApcor (OUTPUT | CPIA_MODULE_VP_CTRL | 9) 163 #define CPIA_COMMAND_SetFlickerCtrl (OUTPUT | CPIA_MODULE_VP_CTRL | 10) 164 #define CPIA_COMMAND_SetVLOffset (OUTPUT | CPIA_MODULE_VP_CTRL | 11) 165 #define CPIA_COMMAND_GetColourParams (INPUT | CPIA_MODULE_VP_CTRL | 16) 166 #define CPIA_COMMAND_GetColourBalance (INPUT | CPIA_MODULE_VP_CTRL | 17) 167 #define CPIA_COMMAND_GetExposure (INPUT | CPIA_MODULE_VP_CTRL | 18) 168 #define CPIA_COMMAND_SetSensorMatrix (OUTPUT | CPIA_MODULE_VP_CTRL | 19) 169 #define CPIA_COMMAND_ColourBars (OUTPUT | CPIA_MODULE_VP_CTRL | 25) 170 #define CPIA_COMMAND_ReadVPRegs (INPUT | CPIA_MODULE_VP_CTRL | 30) 171 #define CPIA_COMMAND_WriteVPReg (OUTPUT | CPIA_MODULE_VP_CTRL | 31) 172 173 #define CPIA_COMMAND_GrabFrame (OUTPUT | CPIA_MODULE_CAPTURE | 1) 174 #define CPIA_COMMAND_UploadFrame (OUTPUT | CPIA_MODULE_CAPTURE | 2) 175 #define CPIA_COMMAND_SetGrabMode (OUTPUT | CPIA_MODULE_CAPTURE | 3) 176 #define CPIA_COMMAND_InitStreamCap (OUTPUT | CPIA_MODULE_CAPTURE | 4) 177 #define CPIA_COMMAND_FiniStreamCap (OUTPUT | CPIA_MODULE_CAPTURE | 5) 178 #define CPIA_COMMAND_StartStreamCap (OUTPUT | CPIA_MODULE_CAPTURE | 6) 179 #define CPIA_COMMAND_EndStreamCap (OUTPUT | CPIA_MODULE_CAPTURE | 7) 180 #define CPIA_COMMAND_SetFormat (OUTPUT | CPIA_MODULE_CAPTURE | 8) 181 #define CPIA_COMMAND_SetROI (OUTPUT | CPIA_MODULE_CAPTURE | 9) 182 #define CPIA_COMMAND_SetCompression (OUTPUT | CPIA_MODULE_CAPTURE | 10) 183 #define CPIA_COMMAND_SetCompressionTarget (OUTPUT | CPIA_MODULE_CAPTURE | 11) 184 #define CPIA_COMMAND_SetYUVThresh (OUTPUT | CPIA_MODULE_CAPTURE | 12) 185 #define CPIA_COMMAND_SetCompressionParams (OUTPUT | CPIA_MODULE_CAPTURE | 13) 186 #define CPIA_COMMAND_DiscardFrame (OUTPUT | CPIA_MODULE_CAPTURE | 14) 187 #define CPIA_COMMAND_GrabReset (OUTPUT | CPIA_MODULE_CAPTURE | 15) 188 189 #define CPIA_COMMAND_OutputRS232 (OUTPUT | CPIA_MODULE_DEBUG | 1) 190 #define CPIA_COMMAND_AbortProcess (OUTPUT | CPIA_MODULE_DEBUG | 4) 191 #define CPIA_COMMAND_SetDramPage (OUTPUT | CPIA_MODULE_DEBUG | 5) 192 #define CPIA_COMMAND_StartDramUpload (OUTPUT | CPIA_MODULE_DEBUG | 6) 193 #define CPIA_COMMAND_StartDummyDtream (OUTPUT | CPIA_MODULE_DEBUG | 8) 194 #define CPIA_COMMAND_AbortStream (OUTPUT | CPIA_MODULE_DEBUG | 9) 195 #define CPIA_COMMAND_DownloadDRAM (OUTPUT | CPIA_MODULE_DEBUG | 10) 196 #define CPIA_COMMAND_Null (OUTPUT | CPIA_MODULE_DEBUG | 11) 197 198 #define ROUND_UP_EXP_FOR_FLICKER 15 199 200 /* Constants for automatic frame rate adjustment */ 201 #define MAX_EXP 302 202 #define MAX_EXP_102 255 203 #define LOW_EXP 140 204 #define VERY_LOW_EXP 70 205 #define TC 94 206 #define EXP_ACC_DARK 50 207 #define EXP_ACC_LIGHT 90 208 #define HIGH_COMP_102 160 209 #define MAX_COMP 239 210 #define DARK_TIME 3 211 #define LIGHT_TIME 3 212 213 #define FIRMWARE_VERSION(x, y) (sd->params.version.firmwareVersion == (x) && \ 214 sd->params.version.firmwareRevision == (y)) 215 216 #define CPIA1_CID_COMP_TARGET (V4L2_CTRL_CLASS_USER + 0x1000) 217 #define BRIGHTNESS_DEF 50 218 #define CONTRAST_DEF 48 219 #define SATURATION_DEF 50 220 #define FREQ_DEF V4L2_CID_POWER_LINE_FREQUENCY_50HZ 221 #define ILLUMINATORS_1_DEF 0 222 #define ILLUMINATORS_2_DEF 0 223 #define COMP_TARGET_DEF CPIA_COMPRESSION_TARGET_QUALITY 224 225 /* Developer's Guide Table 5 p 3-34 226 * indexed by [mains][sensorFps.baserate][sensorFps.divisor]*/ 227 static u8 flicker_jumps[2][2][4] = 228 { { { 76, 38, 19, 9 }, { 92, 46, 23, 11 } }, 229 { { 64, 32, 16, 8 }, { 76, 38, 19, 9} } 230 }; 231 232 struct cam_params { 233 struct { 234 u8 firmwareVersion; 235 u8 firmwareRevision; 236 u8 vcVersion; 237 u8 vcRevision; 238 } version; 239 struct { 240 u16 vendor; 241 u16 product; 242 u16 deviceRevision; 243 } pnpID; 244 struct { 245 u8 vpVersion; 246 u8 vpRevision; 247 u16 cameraHeadID; 248 } vpVersion; 249 struct { 250 u8 systemState; 251 u8 grabState; 252 u8 streamState; 253 u8 fatalError; 254 u8 cmdError; 255 u8 debugFlags; 256 u8 vpStatus; 257 u8 errorCode; 258 } status; 259 struct { 260 u8 brightness; 261 u8 contrast; 262 u8 saturation; 263 } colourParams; 264 struct { 265 u8 gainMode; 266 u8 expMode; 267 u8 compMode; 268 u8 centreWeight; 269 u8 gain; 270 u8 fineExp; 271 u8 coarseExpLo; 272 u8 coarseExpHi; 273 u8 redComp; 274 u8 green1Comp; 275 u8 green2Comp; 276 u8 blueComp; 277 } exposure; 278 struct { 279 u8 balanceMode; 280 u8 redGain; 281 u8 greenGain; 282 u8 blueGain; 283 } colourBalance; 284 struct { 285 u8 divisor; 286 u8 baserate; 287 } sensorFps; 288 struct { 289 u8 gain1; 290 u8 gain2; 291 u8 gain4; 292 u8 gain8; 293 } apcor; 294 struct { 295 u8 disabled; 296 u8 flickerMode; 297 u8 coarseJump; 298 u8 allowableOverExposure; 299 } flickerControl; 300 struct { 301 u8 gain1; 302 u8 gain2; 303 u8 gain4; 304 u8 gain8; 305 } vlOffset; 306 struct { 307 u8 mode; 308 u8 decimation; 309 } compression; 310 struct { 311 u8 frTargeting; 312 u8 targetFR; 313 u8 targetQ; 314 } compressionTarget; 315 struct { 316 u8 yThreshold; 317 u8 uvThreshold; 318 } yuvThreshold; 319 struct { 320 u8 hysteresis; 321 u8 threshMax; 322 u8 smallStep; 323 u8 largeStep; 324 u8 decimationHysteresis; 325 u8 frDiffStepThresh; 326 u8 qDiffStepThresh; 327 u8 decimationThreshMod; 328 } compressionParams; 329 struct { 330 u8 videoSize; /* CIF/QCIF */ 331 u8 subSample; 332 u8 yuvOrder; 333 } format; 334 struct { /* Intel QX3 specific data */ 335 u8 qx3_detected; /* a QX3 is present */ 336 u8 toplight; /* top light lit , R/W */ 337 u8 bottomlight; /* bottom light lit, R/W */ 338 u8 button; /* snapshot button pressed (R/O) */ 339 u8 cradled; /* microscope is in cradle (R/O) */ 340 } qx3; 341 struct { 342 u8 colStart; /* skip first 8*colStart pixels */ 343 u8 colEnd; /* finish at 8*colEnd pixels */ 344 u8 rowStart; /* skip first 4*rowStart lines */ 345 u8 rowEnd; /* finish at 4*rowEnd lines */ 346 } roi; 347 u8 ecpTiming; 348 u8 streamStartLine; 349 }; 350 351 /* specific webcam descriptor */ 352 struct sd { 353 struct gspca_dev gspca_dev; /* !! must be the first item */ 354 struct cam_params params; /* camera settings */ 355 356 atomic_t cam_exposure; 357 atomic_t fps; 358 int exposure_count; 359 u8 exposure_status; 360 struct v4l2_ctrl *freq; 361 u8 mainsFreq; /* 0 = 50hz, 1 = 60hz */ 362 u8 first_frame; 363 }; 364 365 static const struct v4l2_pix_format mode[] = { 366 {160, 120, V4L2_PIX_FMT_CPIA1, V4L2_FIELD_NONE, 367 /* The sizeimage is trial and error, as with low framerates 368 the camera will pad out usb frames, making the image 369 data larger then strictly necessary */ 370 .bytesperline = 160, 371 .sizeimage = 65536, 372 .colorspace = V4L2_COLORSPACE_SRGB, 373 .priv = 3}, 374 {176, 144, V4L2_PIX_FMT_CPIA1, V4L2_FIELD_NONE, 375 .bytesperline = 172, 376 .sizeimage = 65536, 377 .colorspace = V4L2_COLORSPACE_SRGB, 378 .priv = 2}, 379 {320, 240, V4L2_PIX_FMT_CPIA1, V4L2_FIELD_NONE, 380 .bytesperline = 320, 381 .sizeimage = 262144, 382 .colorspace = V4L2_COLORSPACE_SRGB, 383 .priv = 1}, 384 {352, 288, V4L2_PIX_FMT_CPIA1, V4L2_FIELD_NONE, 385 .bytesperline = 352, 386 .sizeimage = 262144, 387 .colorspace = V4L2_COLORSPACE_SRGB, 388 .priv = 0}, 389 }; 390 391 /********************************************************************** 392 * 393 * General functions 394 * 395 **********************************************************************/ 396 397 static int cpia_usb_transferCmd(struct gspca_dev *gspca_dev, u8 *command) 398 { 399 u8 requesttype; 400 unsigned int pipe; 401 int ret, databytes = command[6] | (command[7] << 8); 402 /* Sometimes we see spurious EPIPE errors */ 403 int retries = 3; 404 405 if (command[0] == DATA_IN) { 406 pipe = usb_rcvctrlpipe(gspca_dev->dev, 0); 407 requesttype = USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE; 408 } else if (command[0] == DATA_OUT) { 409 pipe = usb_sndctrlpipe(gspca_dev->dev, 0); 410 requesttype = USB_TYPE_VENDOR | USB_RECIP_DEVICE; 411 } else { 412 gspca_err(gspca_dev, "Unexpected first byte of command: %x\n", 413 command[0]); 414 return -EINVAL; 415 } 416 417 retry: 418 ret = usb_control_msg(gspca_dev->dev, pipe, 419 command[1], 420 requesttype, 421 command[2] | (command[3] << 8), 422 command[4] | (command[5] << 8), 423 gspca_dev->usb_buf, databytes, 1000); 424 425 if (ret < 0) 426 pr_err("usb_control_msg %02x, error %d\n", command[1], ret); 427 428 if (ret == -EPIPE && retries > 0) { 429 retries--; 430 goto retry; 431 } 432 433 return (ret < 0) ? ret : 0; 434 } 435 436 /* send an arbitrary command to the camera */ 437 static int do_command(struct gspca_dev *gspca_dev, u16 command, 438 u8 a, u8 b, u8 c, u8 d) 439 { 440 struct sd *sd = (struct sd *) gspca_dev; 441 int ret, datasize; 442 u8 cmd[8]; 443 444 switch (command) { 445 case CPIA_COMMAND_GetCPIAVersion: 446 case CPIA_COMMAND_GetPnPID: 447 case CPIA_COMMAND_GetCameraStatus: 448 case CPIA_COMMAND_GetVPVersion: 449 case CPIA_COMMAND_GetColourParams: 450 case CPIA_COMMAND_GetColourBalance: 451 case CPIA_COMMAND_GetExposure: 452 datasize = 8; 453 break; 454 case CPIA_COMMAND_ReadMCPorts: 455 case CPIA_COMMAND_ReadVCRegs: 456 datasize = 4; 457 break; 458 default: 459 datasize = 0; 460 break; 461 } 462 463 cmd[0] = command >> 8; 464 cmd[1] = command & 0xff; 465 cmd[2] = a; 466 cmd[3] = b; 467 cmd[4] = c; 468 cmd[5] = d; 469 cmd[6] = datasize; 470 cmd[7] = 0; 471 472 ret = cpia_usb_transferCmd(gspca_dev, cmd); 473 if (ret) 474 return ret; 475 476 switch (command) { 477 case CPIA_COMMAND_GetCPIAVersion: 478 sd->params.version.firmwareVersion = gspca_dev->usb_buf[0]; 479 sd->params.version.firmwareRevision = gspca_dev->usb_buf[1]; 480 sd->params.version.vcVersion = gspca_dev->usb_buf[2]; 481 sd->params.version.vcRevision = gspca_dev->usb_buf[3]; 482 break; 483 case CPIA_COMMAND_GetPnPID: 484 sd->params.pnpID.vendor = 485 gspca_dev->usb_buf[0] | (gspca_dev->usb_buf[1] << 8); 486 sd->params.pnpID.product = 487 gspca_dev->usb_buf[2] | (gspca_dev->usb_buf[3] << 8); 488 sd->params.pnpID.deviceRevision = 489 gspca_dev->usb_buf[4] | (gspca_dev->usb_buf[5] << 8); 490 break; 491 case CPIA_COMMAND_GetCameraStatus: 492 sd->params.status.systemState = gspca_dev->usb_buf[0]; 493 sd->params.status.grabState = gspca_dev->usb_buf[1]; 494 sd->params.status.streamState = gspca_dev->usb_buf[2]; 495 sd->params.status.fatalError = gspca_dev->usb_buf[3]; 496 sd->params.status.cmdError = gspca_dev->usb_buf[4]; 497 sd->params.status.debugFlags = gspca_dev->usb_buf[5]; 498 sd->params.status.vpStatus = gspca_dev->usb_buf[6]; 499 sd->params.status.errorCode = gspca_dev->usb_buf[7]; 500 break; 501 case CPIA_COMMAND_GetVPVersion: 502 sd->params.vpVersion.vpVersion = gspca_dev->usb_buf[0]; 503 sd->params.vpVersion.vpRevision = gspca_dev->usb_buf[1]; 504 sd->params.vpVersion.cameraHeadID = 505 gspca_dev->usb_buf[2] | (gspca_dev->usb_buf[3] << 8); 506 break; 507 case CPIA_COMMAND_GetColourParams: 508 sd->params.colourParams.brightness = gspca_dev->usb_buf[0]; 509 sd->params.colourParams.contrast = gspca_dev->usb_buf[1]; 510 sd->params.colourParams.saturation = gspca_dev->usb_buf[2]; 511 break; 512 case CPIA_COMMAND_GetColourBalance: 513 sd->params.colourBalance.redGain = gspca_dev->usb_buf[0]; 514 sd->params.colourBalance.greenGain = gspca_dev->usb_buf[1]; 515 sd->params.colourBalance.blueGain = gspca_dev->usb_buf[2]; 516 break; 517 case CPIA_COMMAND_GetExposure: 518 sd->params.exposure.gain = gspca_dev->usb_buf[0]; 519 sd->params.exposure.fineExp = gspca_dev->usb_buf[1]; 520 sd->params.exposure.coarseExpLo = gspca_dev->usb_buf[2]; 521 sd->params.exposure.coarseExpHi = gspca_dev->usb_buf[3]; 522 sd->params.exposure.redComp = gspca_dev->usb_buf[4]; 523 sd->params.exposure.green1Comp = gspca_dev->usb_buf[5]; 524 sd->params.exposure.green2Comp = gspca_dev->usb_buf[6]; 525 sd->params.exposure.blueComp = gspca_dev->usb_buf[7]; 526 break; 527 528 case CPIA_COMMAND_ReadMCPorts: 529 /* test button press */ 530 a = ((gspca_dev->usb_buf[1] & 0x02) == 0); 531 if (a != sd->params.qx3.button) { 532 #if IS_ENABLED(CONFIG_INPUT) 533 input_report_key(gspca_dev->input_dev, KEY_CAMERA, a); 534 input_sync(gspca_dev->input_dev); 535 #endif 536 sd->params.qx3.button = a; 537 } 538 if (sd->params.qx3.button) { 539 /* button pressed - unlock the latch */ 540 ret = do_command(gspca_dev, CPIA_COMMAND_WriteMCPort, 541 3, 0xdf, 0xdf, 0); 542 if (ret) 543 return ret; 544 ret = do_command(gspca_dev, CPIA_COMMAND_WriteMCPort, 545 3, 0xff, 0xff, 0); 546 if (ret) 547 return ret; 548 } 549 550 /* test whether microscope is cradled */ 551 sd->params.qx3.cradled = ((gspca_dev->usb_buf[2] & 0x40) == 0); 552 break; 553 } 554 555 return 0; 556 } 557 558 /* send a command to the camera with an additional data transaction */ 559 static int do_command_extended(struct gspca_dev *gspca_dev, u16 command, 560 u8 a, u8 b, u8 c, u8 d, 561 u8 e, u8 f, u8 g, u8 h, 562 u8 i, u8 j, u8 k, u8 l) 563 { 564 u8 cmd[8]; 565 566 cmd[0] = command >> 8; 567 cmd[1] = command & 0xff; 568 cmd[2] = a; 569 cmd[3] = b; 570 cmd[4] = c; 571 cmd[5] = d; 572 cmd[6] = 8; 573 cmd[7] = 0; 574 gspca_dev->usb_buf[0] = e; 575 gspca_dev->usb_buf[1] = f; 576 gspca_dev->usb_buf[2] = g; 577 gspca_dev->usb_buf[3] = h; 578 gspca_dev->usb_buf[4] = i; 579 gspca_dev->usb_buf[5] = j; 580 gspca_dev->usb_buf[6] = k; 581 gspca_dev->usb_buf[7] = l; 582 583 return cpia_usb_transferCmd(gspca_dev, cmd); 584 } 585 586 /* find_over_exposure 587 * Finds a suitable value of OverExposure for use with SetFlickerCtrl 588 * Some calculation is required because this value changes with the brightness 589 * set with SetColourParameters 590 * 591 * Parameters: Brightness - last brightness value set with SetColourParameters 592 * 593 * Returns: OverExposure value to use with SetFlickerCtrl 594 */ 595 #define FLICKER_MAX_EXPOSURE 250 596 #define FLICKER_ALLOWABLE_OVER_EXPOSURE 146 597 #define FLICKER_BRIGHTNESS_CONSTANT 59 598 static int find_over_exposure(int brightness) 599 { 600 int MaxAllowableOverExposure, OverExposure; 601 602 MaxAllowableOverExposure = FLICKER_MAX_EXPOSURE - brightness - 603 FLICKER_BRIGHTNESS_CONSTANT; 604 605 if (MaxAllowableOverExposure < FLICKER_ALLOWABLE_OVER_EXPOSURE) 606 OverExposure = MaxAllowableOverExposure; 607 else 608 OverExposure = FLICKER_ALLOWABLE_OVER_EXPOSURE; 609 610 return OverExposure; 611 } 612 #undef FLICKER_MAX_EXPOSURE 613 #undef FLICKER_ALLOWABLE_OVER_EXPOSURE 614 #undef FLICKER_BRIGHTNESS_CONSTANT 615 616 /* initialise cam_data structure */ 617 static void reset_camera_params(struct gspca_dev *gspca_dev) 618 { 619 struct sd *sd = (struct sd *) gspca_dev; 620 struct cam_params *params = &sd->params; 621 622 /* The following parameter values are the defaults from 623 * "Software Developer's Guide for CPiA Cameras". Any changes 624 * to the defaults are noted in comments. */ 625 params->colourParams.brightness = BRIGHTNESS_DEF; 626 params->colourParams.contrast = CONTRAST_DEF; 627 params->colourParams.saturation = SATURATION_DEF; 628 params->exposure.gainMode = 4; 629 params->exposure.expMode = 2; /* AEC */ 630 params->exposure.compMode = 1; 631 params->exposure.centreWeight = 1; 632 params->exposure.gain = 0; 633 params->exposure.fineExp = 0; 634 params->exposure.coarseExpLo = 185; 635 params->exposure.coarseExpHi = 0; 636 params->exposure.redComp = COMP_RED; 637 params->exposure.green1Comp = COMP_GREEN1; 638 params->exposure.green2Comp = COMP_GREEN2; 639 params->exposure.blueComp = COMP_BLUE; 640 params->colourBalance.balanceMode = 2; /* ACB */ 641 params->colourBalance.redGain = 32; 642 params->colourBalance.greenGain = 6; 643 params->colourBalance.blueGain = 92; 644 params->apcor.gain1 = 0x18; 645 params->apcor.gain2 = 0x16; 646 params->apcor.gain4 = 0x24; 647 params->apcor.gain8 = 0x34; 648 params->vlOffset.gain1 = 20; 649 params->vlOffset.gain2 = 24; 650 params->vlOffset.gain4 = 26; 651 params->vlOffset.gain8 = 26; 652 params->compressionParams.hysteresis = 3; 653 params->compressionParams.threshMax = 11; 654 params->compressionParams.smallStep = 1; 655 params->compressionParams.largeStep = 3; 656 params->compressionParams.decimationHysteresis = 2; 657 params->compressionParams.frDiffStepThresh = 5; 658 params->compressionParams.qDiffStepThresh = 3; 659 params->compressionParams.decimationThreshMod = 2; 660 /* End of default values from Software Developer's Guide */ 661 662 /* Set Sensor FPS to 15fps. This seems better than 30fps 663 * for indoor lighting. */ 664 params->sensorFps.divisor = 1; 665 params->sensorFps.baserate = 1; 666 667 params->flickerControl.flickerMode = 0; 668 params->flickerControl.disabled = 1; 669 params->flickerControl.coarseJump = 670 flicker_jumps[sd->mainsFreq] 671 [params->sensorFps.baserate] 672 [params->sensorFps.divisor]; 673 params->flickerControl.allowableOverExposure = 674 find_over_exposure(params->colourParams.brightness); 675 676 params->yuvThreshold.yThreshold = 6; /* From windows driver */ 677 params->yuvThreshold.uvThreshold = 6; /* From windows driver */ 678 679 params->format.subSample = SUBSAMPLE_420; 680 params->format.yuvOrder = YUVORDER_YUYV; 681 682 params->compression.mode = CPIA_COMPRESSION_AUTO; 683 params->compression.decimation = NO_DECIMATION; 684 685 params->compressionTarget.frTargeting = COMP_TARGET_DEF; 686 params->compressionTarget.targetFR = 15; /* From windows driver */ 687 params->compressionTarget.targetQ = 5; /* From windows driver */ 688 689 params->qx3.qx3_detected = 0; 690 params->qx3.toplight = 0; 691 params->qx3.bottomlight = 0; 692 params->qx3.button = 0; 693 params->qx3.cradled = 0; 694 } 695 696 static void printstatus(struct gspca_dev *gspca_dev, struct cam_params *params) 697 { 698 gspca_dbg(gspca_dev, D_PROBE, "status: %02x %02x %02x %02x %02x %02x %02x %02x\n", 699 params->status.systemState, params->status.grabState, 700 params->status.streamState, params->status.fatalError, 701 params->status.cmdError, params->status.debugFlags, 702 params->status.vpStatus, params->status.errorCode); 703 } 704 705 static int goto_low_power(struct gspca_dev *gspca_dev) 706 { 707 struct sd *sd = (struct sd *) gspca_dev; 708 int ret; 709 710 ret = do_command(gspca_dev, CPIA_COMMAND_GotoLoPower, 0, 0, 0, 0); 711 if (ret) 712 return ret; 713 714 ret = do_command(gspca_dev, CPIA_COMMAND_GetCameraStatus, 0, 0, 0, 0); 715 if (ret) 716 return ret; 717 718 if (sd->params.status.systemState != LO_POWER_STATE) { 719 if (sd->params.status.systemState != WARM_BOOT_STATE) { 720 gspca_err(gspca_dev, "unexpected state after lo power cmd: %02x\n", 721 sd->params.status.systemState); 722 printstatus(gspca_dev, &sd->params); 723 } 724 return -EIO; 725 } 726 727 gspca_dbg(gspca_dev, D_CONF, "camera now in LOW power state\n"); 728 return 0; 729 } 730 731 static int goto_high_power(struct gspca_dev *gspca_dev) 732 { 733 struct sd *sd = (struct sd *) gspca_dev; 734 int ret; 735 736 ret = do_command(gspca_dev, CPIA_COMMAND_GotoHiPower, 0, 0, 0, 0); 737 if (ret) 738 return ret; 739 740 msleep_interruptible(40); /* windows driver does it too */ 741 742 if (signal_pending(current)) 743 return -EINTR; 744 745 ret = do_command(gspca_dev, CPIA_COMMAND_GetCameraStatus, 0, 0, 0, 0); 746 if (ret) 747 return ret; 748 749 if (sd->params.status.systemState != HI_POWER_STATE) { 750 gspca_err(gspca_dev, "unexpected state after hi power cmd: %02x\n", 751 sd->params.status.systemState); 752 printstatus(gspca_dev, &sd->params); 753 return -EIO; 754 } 755 756 gspca_dbg(gspca_dev, D_CONF, "camera now in HIGH power state\n"); 757 return 0; 758 } 759 760 static int get_version_information(struct gspca_dev *gspca_dev) 761 { 762 int ret; 763 764 /* GetCPIAVersion */ 765 ret = do_command(gspca_dev, CPIA_COMMAND_GetCPIAVersion, 0, 0, 0, 0); 766 if (ret) 767 return ret; 768 769 /* GetPnPID */ 770 return do_command(gspca_dev, CPIA_COMMAND_GetPnPID, 0, 0, 0, 0); 771 } 772 773 static int save_camera_state(struct gspca_dev *gspca_dev) 774 { 775 int ret; 776 777 ret = do_command(gspca_dev, CPIA_COMMAND_GetColourBalance, 0, 0, 0, 0); 778 if (ret) 779 return ret; 780 781 return do_command(gspca_dev, CPIA_COMMAND_GetExposure, 0, 0, 0, 0); 782 } 783 784 static int command_setformat(struct gspca_dev *gspca_dev) 785 { 786 struct sd *sd = (struct sd *) gspca_dev; 787 int ret; 788 789 ret = do_command(gspca_dev, CPIA_COMMAND_SetFormat, 790 sd->params.format.videoSize, 791 sd->params.format.subSample, 792 sd->params.format.yuvOrder, 0); 793 if (ret) 794 return ret; 795 796 return do_command(gspca_dev, CPIA_COMMAND_SetROI, 797 sd->params.roi.colStart, sd->params.roi.colEnd, 798 sd->params.roi.rowStart, sd->params.roi.rowEnd); 799 } 800 801 static int command_setcolourparams(struct gspca_dev *gspca_dev) 802 { 803 struct sd *sd = (struct sd *) gspca_dev; 804 return do_command(gspca_dev, CPIA_COMMAND_SetColourParams, 805 sd->params.colourParams.brightness, 806 sd->params.colourParams.contrast, 807 sd->params.colourParams.saturation, 0); 808 } 809 810 static int command_setapcor(struct gspca_dev *gspca_dev) 811 { 812 struct sd *sd = (struct sd *) gspca_dev; 813 return do_command(gspca_dev, CPIA_COMMAND_SetApcor, 814 sd->params.apcor.gain1, 815 sd->params.apcor.gain2, 816 sd->params.apcor.gain4, 817 sd->params.apcor.gain8); 818 } 819 820 static int command_setvloffset(struct gspca_dev *gspca_dev) 821 { 822 struct sd *sd = (struct sd *) gspca_dev; 823 return do_command(gspca_dev, CPIA_COMMAND_SetVLOffset, 824 sd->params.vlOffset.gain1, 825 sd->params.vlOffset.gain2, 826 sd->params.vlOffset.gain4, 827 sd->params.vlOffset.gain8); 828 } 829 830 static int command_setexposure(struct gspca_dev *gspca_dev) 831 { 832 struct sd *sd = (struct sd *) gspca_dev; 833 int ret; 834 835 ret = do_command_extended(gspca_dev, CPIA_COMMAND_SetExposure, 836 sd->params.exposure.gainMode, 837 1, 838 sd->params.exposure.compMode, 839 sd->params.exposure.centreWeight, 840 sd->params.exposure.gain, 841 sd->params.exposure.fineExp, 842 sd->params.exposure.coarseExpLo, 843 sd->params.exposure.coarseExpHi, 844 sd->params.exposure.redComp, 845 sd->params.exposure.green1Comp, 846 sd->params.exposure.green2Comp, 847 sd->params.exposure.blueComp); 848 if (ret) 849 return ret; 850 851 if (sd->params.exposure.expMode != 1) { 852 ret = do_command_extended(gspca_dev, CPIA_COMMAND_SetExposure, 853 0, 854 sd->params.exposure.expMode, 855 0, 0, 856 sd->params.exposure.gain, 857 sd->params.exposure.fineExp, 858 sd->params.exposure.coarseExpLo, 859 sd->params.exposure.coarseExpHi, 860 0, 0, 0, 0); 861 } 862 863 return ret; 864 } 865 866 static int command_setcolourbalance(struct gspca_dev *gspca_dev) 867 { 868 struct sd *sd = (struct sd *) gspca_dev; 869 870 if (sd->params.colourBalance.balanceMode == 1) { 871 int ret; 872 873 ret = do_command(gspca_dev, CPIA_COMMAND_SetColourBalance, 874 1, 875 sd->params.colourBalance.redGain, 876 sd->params.colourBalance.greenGain, 877 sd->params.colourBalance.blueGain); 878 if (ret) 879 return ret; 880 881 return do_command(gspca_dev, CPIA_COMMAND_SetColourBalance, 882 3, 0, 0, 0); 883 } 884 if (sd->params.colourBalance.balanceMode == 2) { 885 return do_command(gspca_dev, CPIA_COMMAND_SetColourBalance, 886 2, 0, 0, 0); 887 } 888 if (sd->params.colourBalance.balanceMode == 3) { 889 return do_command(gspca_dev, CPIA_COMMAND_SetColourBalance, 890 3, 0, 0, 0); 891 } 892 893 return -EINVAL; 894 } 895 896 static int command_setcompressiontarget(struct gspca_dev *gspca_dev) 897 { 898 struct sd *sd = (struct sd *) gspca_dev; 899 900 return do_command(gspca_dev, CPIA_COMMAND_SetCompressionTarget, 901 sd->params.compressionTarget.frTargeting, 902 sd->params.compressionTarget.targetFR, 903 sd->params.compressionTarget.targetQ, 0); 904 } 905 906 static int command_setyuvtresh(struct gspca_dev *gspca_dev) 907 { 908 struct sd *sd = (struct sd *) gspca_dev; 909 910 return do_command(gspca_dev, CPIA_COMMAND_SetYUVThresh, 911 sd->params.yuvThreshold.yThreshold, 912 sd->params.yuvThreshold.uvThreshold, 0, 0); 913 } 914 915 static int command_setcompressionparams(struct gspca_dev *gspca_dev) 916 { 917 struct sd *sd = (struct sd *) gspca_dev; 918 919 return do_command_extended(gspca_dev, 920 CPIA_COMMAND_SetCompressionParams, 921 0, 0, 0, 0, 922 sd->params.compressionParams.hysteresis, 923 sd->params.compressionParams.threshMax, 924 sd->params.compressionParams.smallStep, 925 sd->params.compressionParams.largeStep, 926 sd->params.compressionParams.decimationHysteresis, 927 sd->params.compressionParams.frDiffStepThresh, 928 sd->params.compressionParams.qDiffStepThresh, 929 sd->params.compressionParams.decimationThreshMod); 930 } 931 932 static int command_setcompression(struct gspca_dev *gspca_dev) 933 { 934 struct sd *sd = (struct sd *) gspca_dev; 935 936 return do_command(gspca_dev, CPIA_COMMAND_SetCompression, 937 sd->params.compression.mode, 938 sd->params.compression.decimation, 0, 0); 939 } 940 941 static int command_setsensorfps(struct gspca_dev *gspca_dev) 942 { 943 struct sd *sd = (struct sd *) gspca_dev; 944 945 return do_command(gspca_dev, CPIA_COMMAND_SetSensorFPS, 946 sd->params.sensorFps.divisor, 947 sd->params.sensorFps.baserate, 0, 0); 948 } 949 950 static int command_setflickerctrl(struct gspca_dev *gspca_dev) 951 { 952 struct sd *sd = (struct sd *) gspca_dev; 953 954 return do_command(gspca_dev, CPIA_COMMAND_SetFlickerCtrl, 955 sd->params.flickerControl.flickerMode, 956 sd->params.flickerControl.coarseJump, 957 sd->params.flickerControl.allowableOverExposure, 958 0); 959 } 960 961 static int command_setecptiming(struct gspca_dev *gspca_dev) 962 { 963 struct sd *sd = (struct sd *) gspca_dev; 964 965 return do_command(gspca_dev, CPIA_COMMAND_SetECPTiming, 966 sd->params.ecpTiming, 0, 0, 0); 967 } 968 969 static int command_pause(struct gspca_dev *gspca_dev) 970 { 971 return do_command(gspca_dev, CPIA_COMMAND_EndStreamCap, 0, 0, 0, 0); 972 } 973 974 static int command_resume(struct gspca_dev *gspca_dev) 975 { 976 struct sd *sd = (struct sd *) gspca_dev; 977 978 return do_command(gspca_dev, CPIA_COMMAND_InitStreamCap, 979 0, sd->params.streamStartLine, 0, 0); 980 } 981 982 static int command_setlights(struct gspca_dev *gspca_dev) 983 { 984 struct sd *sd = (struct sd *) gspca_dev; 985 int ret, p1, p2; 986 987 p1 = (sd->params.qx3.bottomlight == 0) << 1; 988 p2 = (sd->params.qx3.toplight == 0) << 3; 989 990 ret = do_command(gspca_dev, CPIA_COMMAND_WriteVCReg, 991 0x90, 0x8f, 0x50, 0); 992 if (ret) 993 return ret; 994 995 return do_command(gspca_dev, CPIA_COMMAND_WriteMCPort, 2, 0, 996 p1 | p2 | 0xe0, 0); 997 } 998 999 static int set_flicker(struct gspca_dev *gspca_dev, int on, int apply) 1000 { 1001 /* Everything in here is from the Windows driver */ 1002 /* define for compgain calculation */ 1003 #if 0 1004 #define COMPGAIN(base, curexp, newexp) \ 1005 (u8) ((((float) base - 128.0) * ((float) curexp / (float) newexp)) + 128.5) 1006 #define EXP_FROM_COMP(basecomp, curcomp, curexp) \ 1007 (u16)((float)curexp * (float)(u8)(curcomp + 128) / \ 1008 (float)(u8)(basecomp - 128)) 1009 #else 1010 /* equivalent functions without floating point math */ 1011 #define COMPGAIN(base, curexp, newexp) \ 1012 (u8)(128 + (((u32)(2*(base-128)*curexp + newexp)) / (2 * newexp))) 1013 #define EXP_FROM_COMP(basecomp, curcomp, curexp) \ 1014 (u16)(((u32)(curexp * (u8)(curcomp + 128)) / (u8)(basecomp - 128))) 1015 #endif 1016 1017 struct sd *sd = (struct sd *) gspca_dev; 1018 int currentexp = sd->params.exposure.coarseExpLo + 1019 sd->params.exposure.coarseExpHi * 256; 1020 int ret, startexp; 1021 1022 if (on) { 1023 int cj = sd->params.flickerControl.coarseJump; 1024 sd->params.flickerControl.flickerMode = 1; 1025 sd->params.flickerControl.disabled = 0; 1026 if (sd->params.exposure.expMode != 2) { 1027 sd->params.exposure.expMode = 2; 1028 sd->exposure_status = EXPOSURE_NORMAL; 1029 } 1030 currentexp = currentexp << sd->params.exposure.gain; 1031 sd->params.exposure.gain = 0; 1032 /* round down current exposure to nearest value */ 1033 startexp = (currentexp + ROUND_UP_EXP_FOR_FLICKER) / cj; 1034 if (startexp < 1) 1035 startexp = 1; 1036 startexp = (startexp * cj) - 1; 1037 if (FIRMWARE_VERSION(1, 2)) 1038 while (startexp > MAX_EXP_102) 1039 startexp -= cj; 1040 else 1041 while (startexp > MAX_EXP) 1042 startexp -= cj; 1043 sd->params.exposure.coarseExpLo = startexp & 0xff; 1044 sd->params.exposure.coarseExpHi = startexp >> 8; 1045 if (currentexp > startexp) { 1046 if (currentexp > (2 * startexp)) 1047 currentexp = 2 * startexp; 1048 sd->params.exposure.redComp = 1049 COMPGAIN(COMP_RED, currentexp, startexp); 1050 sd->params.exposure.green1Comp = 1051 COMPGAIN(COMP_GREEN1, currentexp, startexp); 1052 sd->params.exposure.green2Comp = 1053 COMPGAIN(COMP_GREEN2, currentexp, startexp); 1054 sd->params.exposure.blueComp = 1055 COMPGAIN(COMP_BLUE, currentexp, startexp); 1056 } else { 1057 sd->params.exposure.redComp = COMP_RED; 1058 sd->params.exposure.green1Comp = COMP_GREEN1; 1059 sd->params.exposure.green2Comp = COMP_GREEN2; 1060 sd->params.exposure.blueComp = COMP_BLUE; 1061 } 1062 if (FIRMWARE_VERSION(1, 2)) 1063 sd->params.exposure.compMode = 0; 1064 else 1065 sd->params.exposure.compMode = 1; 1066 1067 sd->params.apcor.gain1 = 0x18; 1068 sd->params.apcor.gain2 = 0x18; 1069 sd->params.apcor.gain4 = 0x16; 1070 sd->params.apcor.gain8 = 0x14; 1071 } else { 1072 sd->params.flickerControl.flickerMode = 0; 1073 sd->params.flickerControl.disabled = 1; 1074 /* Average equivalent coarse for each comp channel */ 1075 startexp = EXP_FROM_COMP(COMP_RED, 1076 sd->params.exposure.redComp, currentexp); 1077 startexp += EXP_FROM_COMP(COMP_GREEN1, 1078 sd->params.exposure.green1Comp, currentexp); 1079 startexp += EXP_FROM_COMP(COMP_GREEN2, 1080 sd->params.exposure.green2Comp, currentexp); 1081 startexp += EXP_FROM_COMP(COMP_BLUE, 1082 sd->params.exposure.blueComp, currentexp); 1083 startexp = startexp >> 2; 1084 while (startexp > MAX_EXP && sd->params.exposure.gain < 1085 sd->params.exposure.gainMode - 1) { 1086 startexp = startexp >> 1; 1087 ++sd->params.exposure.gain; 1088 } 1089 if (FIRMWARE_VERSION(1, 2) && startexp > MAX_EXP_102) 1090 startexp = MAX_EXP_102; 1091 if (startexp > MAX_EXP) 1092 startexp = MAX_EXP; 1093 sd->params.exposure.coarseExpLo = startexp & 0xff; 1094 sd->params.exposure.coarseExpHi = startexp >> 8; 1095 sd->params.exposure.redComp = COMP_RED; 1096 sd->params.exposure.green1Comp = COMP_GREEN1; 1097 sd->params.exposure.green2Comp = COMP_GREEN2; 1098 sd->params.exposure.blueComp = COMP_BLUE; 1099 sd->params.exposure.compMode = 1; 1100 sd->params.apcor.gain1 = 0x18; 1101 sd->params.apcor.gain2 = 0x16; 1102 sd->params.apcor.gain4 = 0x24; 1103 sd->params.apcor.gain8 = 0x34; 1104 } 1105 sd->params.vlOffset.gain1 = 20; 1106 sd->params.vlOffset.gain2 = 24; 1107 sd->params.vlOffset.gain4 = 26; 1108 sd->params.vlOffset.gain8 = 26; 1109 1110 if (apply) { 1111 ret = command_setexposure(gspca_dev); 1112 if (ret) 1113 return ret; 1114 1115 ret = command_setapcor(gspca_dev); 1116 if (ret) 1117 return ret; 1118 1119 ret = command_setvloffset(gspca_dev); 1120 if (ret) 1121 return ret; 1122 1123 ret = command_setflickerctrl(gspca_dev); 1124 if (ret) 1125 return ret; 1126 } 1127 1128 return 0; 1129 #undef EXP_FROM_COMP 1130 #undef COMPGAIN 1131 } 1132 1133 /* monitor the exposure and adjust the sensor frame rate if needed */ 1134 static void monitor_exposure(struct gspca_dev *gspca_dev) 1135 { 1136 struct sd *sd = (struct sd *) gspca_dev; 1137 u8 exp_acc, bcomp, cmd[8]; 1138 int ret, light_exp, dark_exp, very_dark_exp; 1139 int old_exposure, new_exposure, framerate; 1140 int setfps = 0, setexp = 0, setflicker = 0; 1141 1142 /* get necessary stats and register settings from camera */ 1143 /* do_command can't handle this, so do it ourselves */ 1144 cmd[0] = CPIA_COMMAND_ReadVPRegs >> 8; 1145 cmd[1] = CPIA_COMMAND_ReadVPRegs & 0xff; 1146 cmd[2] = 30; 1147 cmd[3] = 4; 1148 cmd[4] = 9; 1149 cmd[5] = 8; 1150 cmd[6] = 8; 1151 cmd[7] = 0; 1152 ret = cpia_usb_transferCmd(gspca_dev, cmd); 1153 if (ret) { 1154 pr_err("ReadVPRegs(30,4,9,8) - failed: %d\n", ret); 1155 return; 1156 } 1157 exp_acc = gspca_dev->usb_buf[0]; 1158 bcomp = gspca_dev->usb_buf[1]; 1159 1160 light_exp = sd->params.colourParams.brightness + 1161 TC - 50 + EXP_ACC_LIGHT; 1162 if (light_exp > 255) 1163 light_exp = 255; 1164 dark_exp = sd->params.colourParams.brightness + 1165 TC - 50 - EXP_ACC_DARK; 1166 if (dark_exp < 0) 1167 dark_exp = 0; 1168 very_dark_exp = dark_exp / 2; 1169 1170 old_exposure = sd->params.exposure.coarseExpHi * 256 + 1171 sd->params.exposure.coarseExpLo; 1172 1173 if (!sd->params.flickerControl.disabled) { 1174 /* Flicker control on */ 1175 int max_comp = FIRMWARE_VERSION(1, 2) ? MAX_COMP : 1176 HIGH_COMP_102; 1177 bcomp += 128; /* decode */ 1178 if (bcomp >= max_comp && exp_acc < dark_exp) { 1179 /* dark */ 1180 if (exp_acc < very_dark_exp) { 1181 /* very dark */ 1182 if (sd->exposure_status == EXPOSURE_VERY_DARK) 1183 ++sd->exposure_count; 1184 else { 1185 sd->exposure_status = 1186 EXPOSURE_VERY_DARK; 1187 sd->exposure_count = 1; 1188 } 1189 } else { 1190 /* just dark */ 1191 if (sd->exposure_status == EXPOSURE_DARK) 1192 ++sd->exposure_count; 1193 else { 1194 sd->exposure_status = EXPOSURE_DARK; 1195 sd->exposure_count = 1; 1196 } 1197 } 1198 } else if (old_exposure <= LOW_EXP || exp_acc > light_exp) { 1199 /* light */ 1200 if (old_exposure <= VERY_LOW_EXP) { 1201 /* very light */ 1202 if (sd->exposure_status == EXPOSURE_VERY_LIGHT) 1203 ++sd->exposure_count; 1204 else { 1205 sd->exposure_status = 1206 EXPOSURE_VERY_LIGHT; 1207 sd->exposure_count = 1; 1208 } 1209 } else { 1210 /* just light */ 1211 if (sd->exposure_status == EXPOSURE_LIGHT) 1212 ++sd->exposure_count; 1213 else { 1214 sd->exposure_status = EXPOSURE_LIGHT; 1215 sd->exposure_count = 1; 1216 } 1217 } 1218 } else { 1219 /* not dark or light */ 1220 sd->exposure_status = EXPOSURE_NORMAL; 1221 } 1222 } else { 1223 /* Flicker control off */ 1224 if (old_exposure >= MAX_EXP && exp_acc < dark_exp) { 1225 /* dark */ 1226 if (exp_acc < very_dark_exp) { 1227 /* very dark */ 1228 if (sd->exposure_status == EXPOSURE_VERY_DARK) 1229 ++sd->exposure_count; 1230 else { 1231 sd->exposure_status = 1232 EXPOSURE_VERY_DARK; 1233 sd->exposure_count = 1; 1234 } 1235 } else { 1236 /* just dark */ 1237 if (sd->exposure_status == EXPOSURE_DARK) 1238 ++sd->exposure_count; 1239 else { 1240 sd->exposure_status = EXPOSURE_DARK; 1241 sd->exposure_count = 1; 1242 } 1243 } 1244 } else if (old_exposure <= LOW_EXP || exp_acc > light_exp) { 1245 /* light */ 1246 if (old_exposure <= VERY_LOW_EXP) { 1247 /* very light */ 1248 if (sd->exposure_status == EXPOSURE_VERY_LIGHT) 1249 ++sd->exposure_count; 1250 else { 1251 sd->exposure_status = 1252 EXPOSURE_VERY_LIGHT; 1253 sd->exposure_count = 1; 1254 } 1255 } else { 1256 /* just light */ 1257 if (sd->exposure_status == EXPOSURE_LIGHT) 1258 ++sd->exposure_count; 1259 else { 1260 sd->exposure_status = EXPOSURE_LIGHT; 1261 sd->exposure_count = 1; 1262 } 1263 } 1264 } else { 1265 /* not dark or light */ 1266 sd->exposure_status = EXPOSURE_NORMAL; 1267 } 1268 } 1269 1270 framerate = atomic_read(&sd->fps); 1271 if (framerate > 30 || framerate < 1) 1272 framerate = 1; 1273 1274 if (!sd->params.flickerControl.disabled) { 1275 /* Flicker control on */ 1276 if ((sd->exposure_status == EXPOSURE_VERY_DARK || 1277 sd->exposure_status == EXPOSURE_DARK) && 1278 sd->exposure_count >= DARK_TIME * framerate && 1279 sd->params.sensorFps.divisor < 2) { 1280 1281 /* dark for too long */ 1282 ++sd->params.sensorFps.divisor; 1283 setfps = 1; 1284 1285 sd->params.flickerControl.coarseJump = 1286 flicker_jumps[sd->mainsFreq] 1287 [sd->params.sensorFps.baserate] 1288 [sd->params.sensorFps.divisor]; 1289 setflicker = 1; 1290 1291 new_exposure = sd->params.flickerControl.coarseJump-1; 1292 while (new_exposure < old_exposure / 2) 1293 new_exposure += 1294 sd->params.flickerControl.coarseJump; 1295 sd->params.exposure.coarseExpLo = new_exposure & 0xff; 1296 sd->params.exposure.coarseExpHi = new_exposure >> 8; 1297 setexp = 1; 1298 sd->exposure_status = EXPOSURE_NORMAL; 1299 gspca_dbg(gspca_dev, D_CONF, "Automatically decreasing sensor_fps\n"); 1300 1301 } else if ((sd->exposure_status == EXPOSURE_VERY_LIGHT || 1302 sd->exposure_status == EXPOSURE_LIGHT) && 1303 sd->exposure_count >= LIGHT_TIME * framerate && 1304 sd->params.sensorFps.divisor > 0) { 1305 1306 /* light for too long */ 1307 int max_exp = FIRMWARE_VERSION(1, 2) ? MAX_EXP_102 : 1308 MAX_EXP; 1309 --sd->params.sensorFps.divisor; 1310 setfps = 1; 1311 1312 sd->params.flickerControl.coarseJump = 1313 flicker_jumps[sd->mainsFreq] 1314 [sd->params.sensorFps.baserate] 1315 [sd->params.sensorFps.divisor]; 1316 setflicker = 1; 1317 1318 new_exposure = sd->params.flickerControl.coarseJump-1; 1319 while (new_exposure < 2 * old_exposure && 1320 new_exposure + 1321 sd->params.flickerControl.coarseJump < max_exp) 1322 new_exposure += 1323 sd->params.flickerControl.coarseJump; 1324 sd->params.exposure.coarseExpLo = new_exposure & 0xff; 1325 sd->params.exposure.coarseExpHi = new_exposure >> 8; 1326 setexp = 1; 1327 sd->exposure_status = EXPOSURE_NORMAL; 1328 gspca_dbg(gspca_dev, D_CONF, "Automatically increasing sensor_fps\n"); 1329 } 1330 } else { 1331 /* Flicker control off */ 1332 if ((sd->exposure_status == EXPOSURE_VERY_DARK || 1333 sd->exposure_status == EXPOSURE_DARK) && 1334 sd->exposure_count >= DARK_TIME * framerate && 1335 sd->params.sensorFps.divisor < 2) { 1336 1337 /* dark for too long */ 1338 ++sd->params.sensorFps.divisor; 1339 setfps = 1; 1340 1341 if (sd->params.exposure.gain > 0) { 1342 --sd->params.exposure.gain; 1343 setexp = 1; 1344 } 1345 sd->exposure_status = EXPOSURE_NORMAL; 1346 gspca_dbg(gspca_dev, D_CONF, "Automatically decreasing sensor_fps\n"); 1347 1348 } else if ((sd->exposure_status == EXPOSURE_VERY_LIGHT || 1349 sd->exposure_status == EXPOSURE_LIGHT) && 1350 sd->exposure_count >= LIGHT_TIME * framerate && 1351 sd->params.sensorFps.divisor > 0) { 1352 1353 /* light for too long */ 1354 --sd->params.sensorFps.divisor; 1355 setfps = 1; 1356 1357 if (sd->params.exposure.gain < 1358 sd->params.exposure.gainMode - 1) { 1359 ++sd->params.exposure.gain; 1360 setexp = 1; 1361 } 1362 sd->exposure_status = EXPOSURE_NORMAL; 1363 gspca_dbg(gspca_dev, D_CONF, "Automatically increasing sensor_fps\n"); 1364 } 1365 } 1366 1367 if (setexp) 1368 command_setexposure(gspca_dev); 1369 1370 if (setfps) 1371 command_setsensorfps(gspca_dev); 1372 1373 if (setflicker) 1374 command_setflickerctrl(gspca_dev); 1375 } 1376 1377 /*-----------------------------------------------------------------*/ 1378 /* if flicker is switched off, this function switches it back on.It checks, 1379 however, that conditions are suitable before restarting it. 1380 This should only be called for firmware version 1.2. 1381 1382 It also adjust the colour balance when an exposure step is detected - as 1383 long as flicker is running 1384 */ 1385 static void restart_flicker(struct gspca_dev *gspca_dev) 1386 { 1387 struct sd *sd = (struct sd *) gspca_dev; 1388 int cam_exposure, old_exp; 1389 1390 if (!FIRMWARE_VERSION(1, 2)) 1391 return; 1392 1393 cam_exposure = atomic_read(&sd->cam_exposure); 1394 1395 if (sd->params.flickerControl.flickerMode == 0 || 1396 cam_exposure == 0) 1397 return; 1398 1399 old_exp = sd->params.exposure.coarseExpLo + 1400 sd->params.exposure.coarseExpHi*256; 1401 /* 1402 see how far away camera exposure is from a valid 1403 flicker exposure value 1404 */ 1405 cam_exposure %= sd->params.flickerControl.coarseJump; 1406 if (!sd->params.flickerControl.disabled && 1407 cam_exposure <= sd->params.flickerControl.coarseJump - 3) { 1408 /* Flicker control auto-disabled */ 1409 sd->params.flickerControl.disabled = 1; 1410 } 1411 1412 if (sd->params.flickerControl.disabled && 1413 old_exp > sd->params.flickerControl.coarseJump + 1414 ROUND_UP_EXP_FOR_FLICKER) { 1415 /* exposure is now high enough to switch 1416 flicker control back on */ 1417 set_flicker(gspca_dev, 1, 1); 1418 } 1419 } 1420 1421 /* this function is called at probe time */ 1422 static int sd_config(struct gspca_dev *gspca_dev, 1423 const struct usb_device_id *id) 1424 { 1425 struct sd *sd = (struct sd *) gspca_dev; 1426 struct cam *cam; 1427 int ret; 1428 1429 sd->mainsFreq = FREQ_DEF == V4L2_CID_POWER_LINE_FREQUENCY_60HZ; 1430 reset_camera_params(gspca_dev); 1431 1432 gspca_dbg(gspca_dev, D_PROBE, "cpia CPiA camera detected (vid/pid 0x%04X:0x%04X)\n", 1433 id->idVendor, id->idProduct); 1434 1435 cam = &gspca_dev->cam; 1436 cam->cam_mode = mode; 1437 cam->nmodes = ARRAY_SIZE(mode); 1438 1439 ret = goto_low_power(gspca_dev); 1440 if (ret) 1441 gspca_err(gspca_dev, "Cannot go to low power mode: %d\n", 1442 ret); 1443 /* Check the firmware version. */ 1444 sd->params.version.firmwareVersion = 0; 1445 get_version_information(gspca_dev); 1446 if (sd->params.version.firmwareVersion != 1) { 1447 gspca_err(gspca_dev, "only firmware version 1 is supported (got: %d)\n", 1448 sd->params.version.firmwareVersion); 1449 return -ENODEV; 1450 } 1451 1452 /* A bug in firmware 1-02 limits gainMode to 2 */ 1453 if (sd->params.version.firmwareRevision <= 2 && 1454 sd->params.exposure.gainMode > 2) { 1455 sd->params.exposure.gainMode = 2; 1456 } 1457 1458 /* set QX3 detected flag */ 1459 sd->params.qx3.qx3_detected = (sd->params.pnpID.vendor == 0x0813 && 1460 sd->params.pnpID.product == 0x0001); 1461 return 0; 1462 } 1463 1464 /* -- start the camera -- */ 1465 static int sd_start(struct gspca_dev *gspca_dev) 1466 { 1467 struct sd *sd = (struct sd *) gspca_dev; 1468 int priv, ret; 1469 1470 /* Start the camera in low power mode */ 1471 if (goto_low_power(gspca_dev)) { 1472 if (sd->params.status.systemState != WARM_BOOT_STATE) { 1473 gspca_err(gspca_dev, "unexpected systemstate: %02x\n", 1474 sd->params.status.systemState); 1475 printstatus(gspca_dev, &sd->params); 1476 return -ENODEV; 1477 } 1478 1479 /* FIXME: this is just dirty trial and error */ 1480 ret = goto_high_power(gspca_dev); 1481 if (ret) 1482 return ret; 1483 1484 ret = do_command(gspca_dev, CPIA_COMMAND_DiscardFrame, 1485 0, 0, 0, 0); 1486 if (ret) 1487 return ret; 1488 1489 ret = goto_low_power(gspca_dev); 1490 if (ret) 1491 return ret; 1492 } 1493 1494 /* procedure described in developer's guide p3-28 */ 1495 1496 /* Check the firmware version. */ 1497 sd->params.version.firmwareVersion = 0; 1498 get_version_information(gspca_dev); 1499 1500 /* The fatal error checking should be done after 1501 * the camera powers up (developer's guide p 3-38) */ 1502 1503 /* Set streamState before transition to high power to avoid bug 1504 * in firmware 1-02 */ 1505 ret = do_command(gspca_dev, CPIA_COMMAND_ModifyCameraStatus, 1506 STREAMSTATE, 0, STREAM_NOT_READY, 0); 1507 if (ret) 1508 return ret; 1509 1510 /* GotoHiPower */ 1511 ret = goto_high_power(gspca_dev); 1512 if (ret) 1513 return ret; 1514 1515 /* Check the camera status */ 1516 ret = do_command(gspca_dev, CPIA_COMMAND_GetCameraStatus, 0, 0, 0, 0); 1517 if (ret) 1518 return ret; 1519 1520 if (sd->params.status.fatalError) { 1521 gspca_err(gspca_dev, "fatal_error: %04x, vp_status: %04x\n", 1522 sd->params.status.fatalError, 1523 sd->params.status.vpStatus); 1524 return -EIO; 1525 } 1526 1527 /* VPVersion can't be retrieved before the camera is in HiPower, 1528 * so get it here instead of in get_version_information. */ 1529 ret = do_command(gspca_dev, CPIA_COMMAND_GetVPVersion, 0, 0, 0, 0); 1530 if (ret) 1531 return ret; 1532 1533 /* Determine video mode settings */ 1534 sd->params.streamStartLine = 120; 1535 1536 priv = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv; 1537 if (priv & 0x01) { /* crop */ 1538 sd->params.roi.colStart = 2; 1539 sd->params.roi.rowStart = 6; 1540 } else { 1541 sd->params.roi.colStart = 0; 1542 sd->params.roi.rowStart = 0; 1543 } 1544 1545 if (priv & 0x02) { /* quarter */ 1546 sd->params.format.videoSize = VIDEOSIZE_QCIF; 1547 sd->params.roi.colStart /= 2; 1548 sd->params.roi.rowStart /= 2; 1549 sd->params.streamStartLine /= 2; 1550 } else 1551 sd->params.format.videoSize = VIDEOSIZE_CIF; 1552 1553 sd->params.roi.colEnd = sd->params.roi.colStart + 1554 (gspca_dev->pixfmt.width >> 3); 1555 sd->params.roi.rowEnd = sd->params.roi.rowStart + 1556 (gspca_dev->pixfmt.height >> 2); 1557 1558 /* And now set the camera to a known state */ 1559 ret = do_command(gspca_dev, CPIA_COMMAND_SetGrabMode, 1560 CPIA_GRAB_CONTINEOUS, 0, 0, 0); 1561 if (ret) 1562 return ret; 1563 /* We start with compression disabled, as we need one uncompressed 1564 frame to handle later compressed frames */ 1565 ret = do_command(gspca_dev, CPIA_COMMAND_SetCompression, 1566 CPIA_COMPRESSION_NONE, 1567 NO_DECIMATION, 0, 0); 1568 if (ret) 1569 return ret; 1570 ret = command_setcompressiontarget(gspca_dev); 1571 if (ret) 1572 return ret; 1573 ret = command_setcolourparams(gspca_dev); 1574 if (ret) 1575 return ret; 1576 ret = command_setformat(gspca_dev); 1577 if (ret) 1578 return ret; 1579 ret = command_setyuvtresh(gspca_dev); 1580 if (ret) 1581 return ret; 1582 ret = command_setecptiming(gspca_dev); 1583 if (ret) 1584 return ret; 1585 ret = command_setcompressionparams(gspca_dev); 1586 if (ret) 1587 return ret; 1588 ret = command_setexposure(gspca_dev); 1589 if (ret) 1590 return ret; 1591 ret = command_setcolourbalance(gspca_dev); 1592 if (ret) 1593 return ret; 1594 ret = command_setsensorfps(gspca_dev); 1595 if (ret) 1596 return ret; 1597 ret = command_setapcor(gspca_dev); 1598 if (ret) 1599 return ret; 1600 ret = command_setflickerctrl(gspca_dev); 1601 if (ret) 1602 return ret; 1603 ret = command_setvloffset(gspca_dev); 1604 if (ret) 1605 return ret; 1606 1607 /* Start stream */ 1608 ret = command_resume(gspca_dev); 1609 if (ret) 1610 return ret; 1611 1612 /* Wait 6 frames before turning compression on for the sensor to get 1613 all settings and AEC/ACB to settle */ 1614 sd->first_frame = 6; 1615 sd->exposure_status = EXPOSURE_NORMAL; 1616 sd->exposure_count = 0; 1617 atomic_set(&sd->cam_exposure, 0); 1618 atomic_set(&sd->fps, 0); 1619 1620 return 0; 1621 } 1622 1623 static void sd_stopN(struct gspca_dev *gspca_dev) 1624 { 1625 struct sd *sd __maybe_unused = (struct sd *) gspca_dev; 1626 1627 command_pause(gspca_dev); 1628 1629 /* save camera state for later open (developers guide ch 3.5.3) */ 1630 save_camera_state(gspca_dev); 1631 1632 /* GotoLoPower */ 1633 goto_low_power(gspca_dev); 1634 1635 /* Update the camera status */ 1636 do_command(gspca_dev, CPIA_COMMAND_GetCameraStatus, 0, 0, 0, 0); 1637 1638 #if IS_ENABLED(CONFIG_INPUT) 1639 /* If the last button state is pressed, release it now! */ 1640 if (sd->params.qx3.button) { 1641 /* The camera latch will hold the pressed state until we reset 1642 the latch, so we do not reset sd->params.qx3.button now, to 1643 avoid a false keypress being reported the next sd_start */ 1644 input_report_key(gspca_dev->input_dev, KEY_CAMERA, 0); 1645 input_sync(gspca_dev->input_dev); 1646 } 1647 #endif 1648 } 1649 1650 /* this function is called at probe and resume time */ 1651 static int sd_init(struct gspca_dev *gspca_dev) 1652 { 1653 struct sd *sd = (struct sd *) gspca_dev; 1654 int ret; 1655 1656 /* Start / Stop the camera to make sure we are talking to 1657 a supported camera, and to get some information from it 1658 to print. */ 1659 ret = sd_start(gspca_dev); 1660 if (ret) 1661 return ret; 1662 1663 /* Ensure the QX3 illuminators' states are restored upon resume, 1664 or disable the illuminator controls, if this isn't a QX3 */ 1665 if (sd->params.qx3.qx3_detected) 1666 command_setlights(gspca_dev); 1667 1668 sd_stopN(gspca_dev); 1669 1670 gspca_dbg(gspca_dev, D_PROBE, "CPIA Version: %d.%02d (%d.%d)\n", 1671 sd->params.version.firmwareVersion, 1672 sd->params.version.firmwareRevision, 1673 sd->params.version.vcVersion, 1674 sd->params.version.vcRevision); 1675 gspca_dbg(gspca_dev, D_PROBE, "CPIA PnP-ID: %04x:%04x:%04x", 1676 sd->params.pnpID.vendor, sd->params.pnpID.product, 1677 sd->params.pnpID.deviceRevision); 1678 gspca_dbg(gspca_dev, D_PROBE, "VP-Version: %d.%d %04x", 1679 sd->params.vpVersion.vpVersion, 1680 sd->params.vpVersion.vpRevision, 1681 sd->params.vpVersion.cameraHeadID); 1682 1683 return 0; 1684 } 1685 1686 static void sd_pkt_scan(struct gspca_dev *gspca_dev, 1687 u8 *data, 1688 int len) 1689 { 1690 struct sd *sd = (struct sd *) gspca_dev; 1691 1692 /* Check for SOF */ 1693 if (len >= 64 && 1694 data[0] == MAGIC_0 && data[1] == MAGIC_1 && 1695 data[16] == sd->params.format.videoSize && 1696 data[17] == sd->params.format.subSample && 1697 data[18] == sd->params.format.yuvOrder && 1698 data[24] == sd->params.roi.colStart && 1699 data[25] == sd->params.roi.colEnd && 1700 data[26] == sd->params.roi.rowStart && 1701 data[27] == sd->params.roi.rowEnd) { 1702 u8 *image; 1703 1704 atomic_set(&sd->cam_exposure, data[39] * 2); 1705 atomic_set(&sd->fps, data[41]); 1706 1707 /* Check for proper EOF for last frame */ 1708 image = gspca_dev->image; 1709 if (image != NULL && 1710 gspca_dev->image_len > 4 && 1711 image[gspca_dev->image_len - 4] == 0xff && 1712 image[gspca_dev->image_len - 3] == 0xff && 1713 image[gspca_dev->image_len - 2] == 0xff && 1714 image[gspca_dev->image_len - 1] == 0xff) 1715 gspca_frame_add(gspca_dev, LAST_PACKET, 1716 NULL, 0); 1717 1718 gspca_frame_add(gspca_dev, FIRST_PACKET, data, len); 1719 return; 1720 } 1721 1722 gspca_frame_add(gspca_dev, INTER_PACKET, data, len); 1723 } 1724 1725 static void sd_dq_callback(struct gspca_dev *gspca_dev) 1726 { 1727 struct sd *sd = (struct sd *) gspca_dev; 1728 1729 /* Set the normal compression settings once we have captured a 1730 few uncompressed frames (and AEC has hopefully settled) */ 1731 if (sd->first_frame) { 1732 sd->first_frame--; 1733 if (sd->first_frame == 0) 1734 command_setcompression(gspca_dev); 1735 } 1736 1737 /* Switch flicker control back on if it got turned off */ 1738 restart_flicker(gspca_dev); 1739 1740 /* If AEC is enabled, monitor the exposure and 1741 adjust the sensor frame rate if needed */ 1742 if (sd->params.exposure.expMode == 2) 1743 monitor_exposure(gspca_dev); 1744 1745 /* Update our knowledge of the camera state */ 1746 do_command(gspca_dev, CPIA_COMMAND_GetExposure, 0, 0, 0, 0); 1747 do_command(gspca_dev, CPIA_COMMAND_ReadMCPorts, 0, 0, 0, 0); 1748 } 1749 1750 static int sd_s_ctrl(struct v4l2_ctrl *ctrl) 1751 { 1752 struct gspca_dev *gspca_dev = 1753 container_of(ctrl->handler, struct gspca_dev, ctrl_handler); 1754 struct sd *sd = (struct sd *)gspca_dev; 1755 1756 gspca_dev->usb_err = 0; 1757 1758 if (!gspca_dev->streaming && ctrl->id != V4L2_CID_POWER_LINE_FREQUENCY) 1759 return 0; 1760 1761 switch (ctrl->id) { 1762 case V4L2_CID_BRIGHTNESS: 1763 sd->params.colourParams.brightness = ctrl->val; 1764 sd->params.flickerControl.allowableOverExposure = 1765 find_over_exposure(sd->params.colourParams.brightness); 1766 gspca_dev->usb_err = command_setcolourparams(gspca_dev); 1767 if (!gspca_dev->usb_err) 1768 gspca_dev->usb_err = command_setflickerctrl(gspca_dev); 1769 break; 1770 case V4L2_CID_CONTRAST: 1771 sd->params.colourParams.contrast = ctrl->val; 1772 gspca_dev->usb_err = command_setcolourparams(gspca_dev); 1773 break; 1774 case V4L2_CID_SATURATION: 1775 sd->params.colourParams.saturation = ctrl->val; 1776 gspca_dev->usb_err = command_setcolourparams(gspca_dev); 1777 break; 1778 case V4L2_CID_POWER_LINE_FREQUENCY: 1779 sd->mainsFreq = ctrl->val == V4L2_CID_POWER_LINE_FREQUENCY_60HZ; 1780 sd->params.flickerControl.coarseJump = 1781 flicker_jumps[sd->mainsFreq] 1782 [sd->params.sensorFps.baserate] 1783 [sd->params.sensorFps.divisor]; 1784 1785 gspca_dev->usb_err = set_flicker(gspca_dev, 1786 ctrl->val != V4L2_CID_POWER_LINE_FREQUENCY_DISABLED, 1787 gspca_dev->streaming); 1788 break; 1789 case V4L2_CID_ILLUMINATORS_1: 1790 sd->params.qx3.bottomlight = ctrl->val; 1791 gspca_dev->usb_err = command_setlights(gspca_dev); 1792 break; 1793 case V4L2_CID_ILLUMINATORS_2: 1794 sd->params.qx3.toplight = ctrl->val; 1795 gspca_dev->usb_err = command_setlights(gspca_dev); 1796 break; 1797 case CPIA1_CID_COMP_TARGET: 1798 sd->params.compressionTarget.frTargeting = ctrl->val; 1799 gspca_dev->usb_err = command_setcompressiontarget(gspca_dev); 1800 break; 1801 } 1802 return gspca_dev->usb_err; 1803 } 1804 1805 static const struct v4l2_ctrl_ops sd_ctrl_ops = { 1806 .s_ctrl = sd_s_ctrl, 1807 }; 1808 1809 static int sd_init_controls(struct gspca_dev *gspca_dev) 1810 { 1811 struct sd *sd = (struct sd *)gspca_dev; 1812 struct v4l2_ctrl_handler *hdl = &gspca_dev->ctrl_handler; 1813 static const char * const comp_target_menu[] = { 1814 "Quality", 1815 "Framerate", 1816 NULL 1817 }; 1818 static const struct v4l2_ctrl_config comp_target = { 1819 .ops = &sd_ctrl_ops, 1820 .id = CPIA1_CID_COMP_TARGET, 1821 .type = V4L2_CTRL_TYPE_MENU, 1822 .name = "Compression Target", 1823 .qmenu = comp_target_menu, 1824 .max = 1, 1825 .def = COMP_TARGET_DEF, 1826 }; 1827 1828 gspca_dev->vdev.ctrl_handler = hdl; 1829 v4l2_ctrl_handler_init(hdl, 7); 1830 v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, 1831 V4L2_CID_BRIGHTNESS, 0, 100, 1, BRIGHTNESS_DEF); 1832 v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, 1833 V4L2_CID_CONTRAST, 0, 96, 8, CONTRAST_DEF); 1834 v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, 1835 V4L2_CID_SATURATION, 0, 100, 1, SATURATION_DEF); 1836 sd->freq = v4l2_ctrl_new_std_menu(hdl, &sd_ctrl_ops, 1837 V4L2_CID_POWER_LINE_FREQUENCY, 1838 V4L2_CID_POWER_LINE_FREQUENCY_60HZ, 0, 1839 FREQ_DEF); 1840 if (sd->params.qx3.qx3_detected) { 1841 v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, 1842 V4L2_CID_ILLUMINATORS_1, 0, 1, 1, 1843 ILLUMINATORS_1_DEF); 1844 v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, 1845 V4L2_CID_ILLUMINATORS_2, 0, 1, 1, 1846 ILLUMINATORS_2_DEF); 1847 } 1848 v4l2_ctrl_new_custom(hdl, &comp_target, NULL); 1849 1850 if (hdl->error) { 1851 pr_err("Could not initialize controls\n"); 1852 return hdl->error; 1853 } 1854 return 0; 1855 } 1856 1857 /* sub-driver description */ 1858 static const struct sd_desc sd_desc = { 1859 .name = MODULE_NAME, 1860 .config = sd_config, 1861 .init = sd_init, 1862 .init_controls = sd_init_controls, 1863 .start = sd_start, 1864 .stopN = sd_stopN, 1865 .dq_callback = sd_dq_callback, 1866 .pkt_scan = sd_pkt_scan, 1867 #if IS_ENABLED(CONFIG_INPUT) 1868 .other_input = 1, 1869 #endif 1870 }; 1871 1872 /* -- module initialisation -- */ 1873 static const struct usb_device_id device_table[] = { 1874 {USB_DEVICE(0x0553, 0x0002)}, 1875 {USB_DEVICE(0x0813, 0x0001)}, 1876 {} 1877 }; 1878 MODULE_DEVICE_TABLE(usb, device_table); 1879 1880 /* -- device connect -- */ 1881 static int sd_probe(struct usb_interface *intf, 1882 const struct usb_device_id *id) 1883 { 1884 return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), 1885 THIS_MODULE); 1886 } 1887 1888 static struct usb_driver sd_driver = { 1889 .name = MODULE_NAME, 1890 .id_table = device_table, 1891 .probe = sd_probe, 1892 .disconnect = gspca_disconnect, 1893 #ifdef CONFIG_PM 1894 .suspend = gspca_suspend, 1895 .resume = gspca_resume, 1896 .reset_resume = gspca_resume, 1897 #endif 1898 }; 1899 1900 module_usb_driver(sd_driver); 1901