1 // SPDX-License-Identifier: GPL-2.0+ 2 // 3 // em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB 4 // video capture devices 5 // 6 // Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it> 7 // Markus Rechberger <mrechberger@gmail.com> 8 // Mauro Carvalho Chehab <mchehab@kernel.org> 9 // Sascha Sommer <saschasommer@freenet.de> 10 // Copyright (C) 2012 Frank Schäfer <fschaefer.oss@googlemail.com> 11 // 12 // This program is free software; you can redistribute it and/or modify 13 // it under the terms of the GNU General Public License as published by 14 // the Free Software Foundation; either version 2 of the License, or 15 // (at your option) any later version. 16 // 17 // This program is distributed in the hope that it will be useful, 18 // but WITHOUT ANY WARRANTY; without even the implied warranty of 19 // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 20 // GNU General Public License for more details. 21 22 #include "em28xx.h" 23 24 #include <linux/init.h> 25 #include <linux/module.h> 26 #include <linux/slab.h> 27 #include <linux/delay.h> 28 #include <linux/i2c.h> 29 #include <linux/usb.h> 30 #include <media/tuner.h> 31 #include <media/drv-intf/msp3400.h> 32 #include <media/i2c/saa7115.h> 33 #include <dt-bindings/media/tvp5150.h> 34 #include <media/i2c/tvaudio.h> 35 #include <media/tveeprom.h> 36 #include <media/v4l2-common.h> 37 #include <sound/ac97_codec.h> 38 39 #define DRIVER_NAME "em28xx" 40 41 static int tuner = -1; 42 module_param(tuner, int, 0444); 43 MODULE_PARM_DESC(tuner, "tuner type"); 44 45 static unsigned int disable_ir; 46 module_param(disable_ir, int, 0444); 47 MODULE_PARM_DESC(disable_ir, "disable infrared remote support"); 48 49 static unsigned int disable_usb_speed_check; 50 module_param(disable_usb_speed_check, int, 0444); 51 MODULE_PARM_DESC(disable_usb_speed_check, 52 "override min bandwidth requirement of 480M bps"); 53 54 static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U }; 55 module_param_array(card, int, NULL, 0444); 56 MODULE_PARM_DESC(card, "card type"); 57 58 static int usb_xfer_mode = -1; 59 module_param(usb_xfer_mode, int, 0444); 60 MODULE_PARM_DESC(usb_xfer_mode, 61 "USB transfer mode for frame data (-1 = auto, 0 = prefer isoc, 1 = prefer bulk)"); 62 63 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */ 64 static DECLARE_BITMAP(em28xx_devused, EM28XX_MAXBOARDS); 65 66 struct em28xx_hash_table { 67 unsigned long hash; 68 unsigned int model; 69 unsigned int tuner; 70 }; 71 72 static void em28xx_pre_card_setup(struct em28xx *dev); 73 74 /* 75 * Reset sequences for analog/digital modes 76 */ 77 78 /* Reset for the most [analog] boards */ 79 static const struct em28xx_reg_seq default_analog[] = { 80 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 81 { -1, -1, -1, -1}, 82 }; 83 84 /* Reset for the most [digital] boards */ 85 static const struct em28xx_reg_seq default_digital[] = { 86 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 87 { -1, -1, -1, -1}, 88 }; 89 90 /* Board :Zolid Hybrid Tv Stick */ 91 static struct em28xx_reg_seq zolid_tuner[] = { 92 {EM2820_R08_GPIO_CTRL, 0xfd, 0xff, 100}, 93 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 100}, 94 { -1, -1, -1, -1}, 95 }; 96 97 static struct em28xx_reg_seq zolid_digital[] = { 98 {EM2820_R08_GPIO_CTRL, 0x6a, 0xff, 100}, 99 {EM2820_R08_GPIO_CTRL, 0x7a, 0xff, 100}, 100 {EM2880_R04_GPO, 0x04, 0xff, 100}, 101 {EM2880_R04_GPO, 0x0c, 0xff, 100}, 102 { -1, -1, -1, -1}, 103 }; 104 105 /* Board Hauppauge WinTV HVR 900 analog */ 106 static const struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = { 107 {EM2820_R08_GPIO_CTRL, 0x2d, ~EM_GPIO_4, 10}, 108 { 0x05, 0xff, 0x10, 10}, 109 { -1, -1, -1, -1}, 110 }; 111 112 /* Board Hauppauge WinTV HVR 900 digital */ 113 static const struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = { 114 {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10}, 115 {EM2880_R04_GPO, 0x04, 0x0f, 10}, 116 {EM2880_R04_GPO, 0x0c, 0x0f, 10}, 117 { -1, -1, -1, -1}, 118 }; 119 120 /* Board Hauppauge WinTV HVR 900 (R2) digital */ 121 static const struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = { 122 {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10}, 123 {EM2880_R04_GPO, 0x0c, 0x0f, 10}, 124 { -1, -1, -1, -1}, 125 }; 126 127 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */ 128 static const struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = { 129 {EM2820_R08_GPIO_CTRL, 0x69, ~EM_GPIO_4, 10}, 130 { -1, -1, -1, -1}, 131 }; 132 133 /* Board - EM2882 Kworld 315U digital */ 134 static const struct em28xx_reg_seq em2882_kworld_315u_digital[] = { 135 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 136 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, 137 {EM2880_R04_GPO, 0x04, 0xff, 10}, 138 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 139 {EM2820_R08_GPIO_CTRL, 0x7e, 0xff, 10}, 140 { -1, -1, -1, -1}, 141 }; 142 143 static const struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = { 144 {EM2880_R04_GPO, 0x08, 0xff, 10}, 145 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 146 {EM2880_R04_GPO, 0x08, 0xff, 10}, 147 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 148 { -1, -1, -1, -1}, 149 }; 150 151 static const struct em28xx_reg_seq kworld_330u_analog[] = { 152 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 153 {EM2880_R04_GPO, 0x00, 0xff, 10}, 154 { -1, -1, -1, -1}, 155 }; 156 157 static const struct em28xx_reg_seq kworld_330u_digital[] = { 158 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 159 {EM2880_R04_GPO, 0x08, 0xff, 10}, 160 { -1, -1, -1, -1}, 161 }; 162 163 /* 164 * Evga inDtube 165 * GPIO0 - Enable digital power (s5h1409) - low to enable 166 * GPIO1 - Enable analog power (tvp5150/emp202) - low to enable 167 * GPIO4 - xc3028 reset 168 * GOP3 - s5h1409 reset 169 */ 170 static const struct em28xx_reg_seq evga_indtube_analog[] = { 171 {EM2820_R08_GPIO_CTRL, 0x79, 0xff, 60}, 172 { -1, -1, -1, -1}, 173 }; 174 175 static const struct em28xx_reg_seq evga_indtube_digital[] = { 176 {EM2820_R08_GPIO_CTRL, 0x7a, 0xff, 1}, 177 {EM2880_R04_GPO, 0x04, 0xff, 10}, 178 {EM2880_R04_GPO, 0x0c, 0xff, 1}, 179 { -1, -1, -1, -1}, 180 }; 181 182 /* 183 * KWorld PlusTV 340U, UB435-Q and UB435-Q V2 (ATSC) GPIOs map: 184 * EM_GPIO_0 - currently unknown 185 * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on) 186 * EM_GPIO_2 - currently unknown 187 * EM_GPIO_3 - currently unknown 188 * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset) 189 * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset) 190 * EM_GPIO_6 - currently unknown 191 * EM_GPIO_7 - currently unknown 192 */ 193 static const struct em28xx_reg_seq kworld_a340_digital[] = { 194 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 195 { -1, -1, -1, -1}, 196 }; 197 198 static const struct em28xx_reg_seq kworld_ub435q_v3_digital[] = { 199 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100}, 200 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100}, 201 {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 100}, 202 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100}, 203 { -1, -1, -1, -1}, 204 }; 205 206 /* Pinnacle Hybrid Pro eb1a:2881 */ 207 static const struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = { 208 {EM2820_R08_GPIO_CTRL, 0xfd, ~EM_GPIO_4, 10}, 209 { -1, -1, -1, -1}, 210 }; 211 212 static const struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = { 213 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 214 {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */ 215 {EM2880_R04_GPO, 0x0c, 0xff, 1}, 216 { -1, -1, -1, -1}, 217 }; 218 219 static const struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = { 220 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 221 {EM2880_R04_GPO, 0x00, 0xff, 10}, 222 { -1, -1, -1, -1}, 223 }; 224 225 static const struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = { 226 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 227 {EM2880_R04_GPO, 0x08, 0xff, 10}, 228 { -1, -1, -1, -1}, 229 }; 230 231 /* 232 * PCTV HD Mini (80e) GPIOs 233 * 0-5: not used 234 * 6: demod reset, active low 235 * 7: LED on, active high 236 */ 237 static const struct em28xx_reg_seq em2874_pctv_80e_digital[] = { 238 {EM28XX_R06_I2C_CLK, 0x45, 0xff, 10}, /*400 KHz*/ 239 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 100},/*Demod reset*/ 240 {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 10}, 241 { -1, -1, -1, -1}, 242 }; 243 244 /* 245 * eb1a:2868 Reddo DVB-C USB TV Box 246 * GPIO4 - CU1216L NIM 247 * Other GPIOs seems to be don't care. 248 */ 249 static const struct em28xx_reg_seq reddo_dvb_c_usb_box[] = { 250 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, 251 {EM2820_R08_GPIO_CTRL, 0xde, 0xff, 10}, 252 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, 253 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 254 {EM2820_R08_GPIO_CTRL, 0x7f, 0xff, 10}, 255 {EM2820_R08_GPIO_CTRL, 0x6f, 0xff, 10}, 256 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 257 { -1, -1, -1, -1}, 258 }; 259 260 /* Callback for the most boards */ 261 static const struct em28xx_reg_seq default_tuner_gpio[] = { 262 {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10}, 263 {EM2820_R08_GPIO_CTRL, 0, EM_GPIO_4, 10}, 264 {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10}, 265 { -1, -1, -1, -1}, 266 }; 267 268 /* Mute/unmute */ 269 static const struct em28xx_reg_seq compro_unmute_tv_gpio[] = { 270 {EM2820_R08_GPIO_CTRL, 5, 7, 10}, 271 { -1, -1, -1, -1}, 272 }; 273 274 static const struct em28xx_reg_seq compro_unmute_svid_gpio[] = { 275 {EM2820_R08_GPIO_CTRL, 4, 7, 10}, 276 { -1, -1, -1, -1}, 277 }; 278 279 static const struct em28xx_reg_seq compro_mute_gpio[] = { 280 {EM2820_R08_GPIO_CTRL, 6, 7, 10}, 281 { -1, -1, -1, -1}, 282 }; 283 284 /* Terratec AV350 */ 285 static const struct em28xx_reg_seq terratec_av350_mute_gpio[] = { 286 {EM2820_R08_GPIO_CTRL, 0xff, 0x7f, 10}, 287 { -1, -1, -1, -1}, 288 }; 289 290 static const struct em28xx_reg_seq terratec_av350_unmute_gpio[] = { 291 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 292 { -1, -1, -1, -1}, 293 }; 294 295 static const struct em28xx_reg_seq silvercrest_reg_seq[] = { 296 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 297 {EM2820_R08_GPIO_CTRL, 0x01, 0xf7, 10}, 298 { -1, -1, -1, -1}, 299 }; 300 301 static const struct em28xx_reg_seq vc211a_enable[] = { 302 {EM2820_R08_GPIO_CTRL, 0xff, 0x07, 10}, 303 {EM2820_R08_GPIO_CTRL, 0xff, 0x0f, 10}, 304 {EM2820_R08_GPIO_CTRL, 0xff, 0x0b, 10}, 305 { -1, -1, -1, -1}, 306 }; 307 308 static const struct em28xx_reg_seq dikom_dk300_digital[] = { 309 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 310 {EM2880_R04_GPO, 0x08, 0xff, 10}, 311 { -1, -1, -1, -1}, 312 }; 313 314 /* Reset for the most [digital] boards */ 315 static const struct em28xx_reg_seq leadership_digital[] = { 316 {EM2874_R80_GPIO_P0_CTRL, 0x70, 0xff, 10}, 317 { -1, -1, -1, -1}, 318 }; 319 320 static const struct em28xx_reg_seq leadership_reset[] = { 321 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10}, 322 {EM2874_R80_GPIO_P0_CTRL, 0xb0, 0xff, 10}, 323 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10}, 324 { -1, -1, -1, -1}, 325 }; 326 327 /* 328 * 2013:024f PCTV nanoStick T2 290e 329 * GPIO_6 - demod reset 330 * GPIO_7 - LED 331 */ 332 static const struct em28xx_reg_seq pctv_290e[] = { 333 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 80}, 334 {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 80}, /* GPIO_6 = 1 */ 335 {EM2874_R80_GPIO_P0_CTRL, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */ 336 { -1, -1, -1, -1}, 337 }; 338 339 #if 0 340 static const struct em28xx_reg_seq terratec_h5_gpio[] = { 341 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 342 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100}, 343 {EM2874_R80_GPIO_P0_CTRL, 0xf2, 0xff, 50}, 344 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 50}, 345 { -1, -1, -1, -1}, 346 }; 347 348 static const struct em28xx_reg_seq terratec_h5_digital[] = { 349 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10}, 350 {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, 351 {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10}, 352 { -1, -1, -1, -1}, 353 }; 354 #endif 355 356 /* 357 * 2013:024f PCTV DVB-S2 Stick 460e 358 * GPIO_0 - POWER_ON 359 * GPIO_1 - BOOST 360 * GPIO_2 - VUV_LNB (red LED) 361 * GPIO_3 - EXT_12V 362 * GPIO_4 - INT_DEM (DEMOD GPIO_0) 363 * GPIO_5 - INT_LNB 364 * GPIO_6 - RESET_DEM 365 * GPIO_7 - LED (green LED) 366 */ 367 static const struct em28xx_reg_seq pctv_460e[] = { 368 {EM2874_R80_GPIO_P0_CTRL, 0x01, 0xff, 50}, 369 { 0x0d, 0xff, 0xff, 50}, 370 {EM2874_R80_GPIO_P0_CTRL, 0x41, 0xff, 50}, /* GPIO_6=1 */ 371 { 0x0d, 0x42, 0xff, 50}, 372 {EM2874_R80_GPIO_P0_CTRL, 0x61, 0xff, 50}, /* GPIO_5=1 */ 373 { -1, -1, -1, -1}, 374 }; 375 376 static const struct em28xx_reg_seq c3tech_digital_duo_digital[] = { 377 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10}, 378 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, /* xc5000 reset */ 379 {EM2874_R80_GPIO_P0_CTRL, 0xf9, 0xff, 35}, 380 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, 381 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10}, 382 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 10}, 383 {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 10}, 384 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 20}, 385 { -1, -1, -1, -1}, 386 }; 387 388 /* 389 * 2013:0258 PCTV DVB-S2 Stick (461e) 390 * GPIO 0 = POWER_ON 391 * GPIO 1 = BOOST 392 * GPIO 2 = VUV_LNB (red LED) 393 * GPIO 3 = #EXT_12V 394 * GPIO 4 = INT_DEM 395 * GPIO 5 = INT_LNB 396 * GPIO 6 = #RESET_DEM 397 * GPIO 7 = P07_LED (green LED) 398 */ 399 static const struct em28xx_reg_seq pctv_461e[] = { 400 {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 0}, 401 {0x0d, 0xff, 0xff, 0}, 402 {EM2874_R80_GPIO_P0_CTRL, 0x3f, 0xff, 100}, /* reset demod */ 403 {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 200}, /* reset demod */ 404 {0x0d, 0x42, 0xff, 0}, 405 {EM2874_R80_GPIO_P0_CTRL, 0xeb, 0xff, 0}, 406 {EM2874_R5F_TS_ENABLE, 0x84, 0x84, 0}, /* parallel? | null discard */ 407 { -1, -1, -1, -1}, 408 }; 409 410 #if 0 411 static const struct em28xx_reg_seq hauppauge_930c_gpio[] = { 412 {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10}, 413 {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, /* xc5000 reset */ 414 {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10}, 415 {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, 416 { -1, -1, -1, -1}, 417 }; 418 419 static const struct em28xx_reg_seq hauppauge_930c_digital[] = { 420 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10}, 421 {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, 422 {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10}, 423 { -1, -1, -1, -1}, 424 }; 425 #endif 426 427 /* 428 * 1b80:e425 MaxMedia UB425-TC 429 * 1b80:e1cc Delock 61959 430 * GPIO_6 - demod reset, 0=active 431 * GPIO_7 - LED, 0=active 432 */ 433 static const struct em28xx_reg_seq maxmedia_ub425_tc[] = { 434 {EM2874_R80_GPIO_P0_CTRL, 0x83, 0xff, 100}, 435 {EM2874_R80_GPIO_P0_CTRL, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */ 436 {EM2874_R80_GPIO_P0_CTRL, 0x43, 0xff, 000}, /* GPIO_7 = 0 */ 437 { -1, -1, -1, -1}, 438 }; 439 440 /* 441 * 2304:0242 PCTV QuatroStick (510e) 442 * GPIO_2: decoder reset, 0=active 443 * GPIO_4: decoder suspend, 0=active 444 * GPIO_6: demod reset, 0=active 445 * GPIO_7: LED, 1=active 446 */ 447 static const struct em28xx_reg_seq pctv_510e[] = { 448 {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100}, 449 {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ 450 {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ 451 { -1, -1, -1, -1}, 452 }; 453 454 /* 455 * 2013:0251 PCTV QuatroStick nano (520e) 456 * GPIO_2: decoder reset, 0=active 457 * GPIO_4: decoder suspend, 0=active 458 * GPIO_6: demod reset, 0=active 459 * GPIO_7: LED, 1=active 460 */ 461 static const struct em28xx_reg_seq pctv_520e[] = { 462 {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100}, 463 {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ 464 {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ 465 {EM2874_R80_GPIO_P0_CTRL, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */ 466 { -1, -1, -1, -1}, 467 }; 468 469 /* 470 * 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam 471 * reg 0x80/0x84: 472 * GPIO_0: capturing LED, 0=on, 1=off 473 * GPIO_2: AV mute button, 0=pressed, 1=unpressed 474 * GPIO 3: illumination button, 0=pressed, 1=unpressed 475 * GPIO_6: illumination/flash LED, 0=on, 1=off 476 * reg 0x81/0x85: 477 * GPIO_7: snapshot button, 0=pressed, 1=unpressed 478 */ 479 static const struct em28xx_reg_seq speedlink_vad_laplace_reg_seq[] = { 480 {EM2820_R08_GPIO_CTRL, 0xf7, 0xff, 10}, 481 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xb2, 10}, 482 { -1, -1, -1, -1}, 483 }; 484 485 static const struct em28xx_reg_seq pctv_292e[] = { 486 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, 487 {0x0d, 0xff, 0xff, 950}, 488 {EM2874_R80_GPIO_P0_CTRL, 0xbd, 0xff, 100}, 489 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 410}, 490 {EM2874_R80_GPIO_P0_CTRL, 0x7d, 0xff, 300}, 491 {EM2874_R80_GPIO_P0_CTRL, 0x7c, 0xff, 60}, 492 {0x0d, 0x42, 0xff, 50}, 493 {EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0}, 494 {-1, -1, -1, -1}, 495 }; 496 497 static const struct em28xx_reg_seq terratec_t2_stick_hd[] = { 498 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, 499 {0x0d, 0xff, 0xff, 600}, 500 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 10}, 501 {EM2874_R80_GPIO_P0_CTRL, 0xbc, 0xff, 100}, 502 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 100}, 503 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 300}, 504 {EM2874_R80_GPIO_P0_CTRL, 0xf8, 0xff, 100}, 505 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 300}, 506 {0x0d, 0x42, 0xff, 1000}, 507 {EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0}, 508 {-1, -1, -1, -1}, 509 }; 510 511 static const struct em28xx_reg_seq plex_px_bcud[] = { 512 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, 513 {0x0d, 0xff, 0xff, 0}, 514 {EM2874_R50_IR_CONFIG, 0x01, 0xff, 0}, 515 {EM28XX_R06_I2C_CLK, 0x40, 0xff, 0}, 516 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 100}, 517 {EM28XX_R12_VINENABLE, 0x20, 0x20, 0}, 518 {0x0d, 0x42, 0xff, 1000}, 519 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 10}, 520 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, 521 {0x73, 0xfd, 0xff, 100}, 522 {-1, -1, -1, -1}, 523 }; 524 525 /* 526 * 2040:0265 Hauppauge WinTV-dualHD DVB Isoc 527 * 2040:8265 Hauppauge WinTV-dualHD DVB Bulk 528 * 2040:026d Hauppauge WinTV-dualHD ATSC/QAM Isoc 529 * 2040:826d Hauppauge WinTV-dualHD ATSC/QAM Bulk 530 * reg 0x80/0x84: 531 * GPIO_0: Yellow LED tuner 1, 0=on, 1=off 532 * GPIO_1: Green LED tuner 1, 0=on, 1=off 533 * GPIO_2: Yellow LED tuner 2, 0=on, 1=off 534 * GPIO_3: Green LED tuner 2, 0=on, 1=off 535 * GPIO_5: Reset #2, 0=active 536 * GPIO_6: Reset #1, 0=active 537 */ 538 static const struct em28xx_reg_seq hauppauge_dualhd_dvb[] = { 539 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, 540 {0x0d, 0xff, 0xff, 200}, 541 {0x50, 0x04, 0xff, 300}, 542 {EM2874_R80_GPIO_P0_CTRL, 0xbf, 0xff, 100}, /* demod 1 reset */ 543 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100}, 544 {EM2874_R80_GPIO_P0_CTRL, 0xdf, 0xff, 100}, /* demod 2 reset */ 545 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100}, 546 {EM2874_R5F_TS_ENABLE, 0x00, 0xff, 50}, /* disable TS filters */ 547 {EM2874_R5D_TS1_PKT_SIZE, 0x05, 0xff, 50}, 548 {EM2874_R5E_TS2_PKT_SIZE, 0x05, 0xff, 50}, 549 {-1, -1, -1, -1}, 550 }; 551 552 /* 553 * Button definitions 554 */ 555 static const struct em28xx_button std_snapshot_button[] = { 556 { 557 .role = EM28XX_BUTTON_SNAPSHOT, 558 .reg_r = EM28XX_R0C_USBSUSP, 559 .reg_clearing = EM28XX_R0C_USBSUSP, 560 .mask = EM28XX_R0C_USBSUSP_SNAPSHOT, 561 .inverted = 0, 562 }, 563 {-1, 0, 0, 0, 0}, 564 }; 565 566 static const struct em28xx_button speedlink_vad_laplace_buttons[] = { 567 { 568 .role = EM28XX_BUTTON_SNAPSHOT, 569 .reg_r = EM2874_R85_GPIO_P1_STATE, 570 .mask = 0x80, 571 .inverted = 1, 572 }, 573 { 574 .role = EM28XX_BUTTON_ILLUMINATION, 575 .reg_r = EM2874_R84_GPIO_P0_STATE, 576 .mask = 0x08, 577 .inverted = 1, 578 }, 579 {-1, 0, 0, 0, 0}, 580 }; 581 582 /* 583 * LED definitions 584 */ 585 static struct em28xx_led speedlink_vad_laplace_leds[] = { 586 { 587 .role = EM28XX_LED_ANALOG_CAPTURING, 588 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 589 .gpio_mask = 0x01, 590 .inverted = 1, 591 }, 592 { 593 .role = EM28XX_LED_ILLUMINATION, 594 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 595 .gpio_mask = 0x40, 596 .inverted = 1, 597 }, 598 {-1, 0, 0, 0}, 599 }; 600 601 static struct em28xx_led kworld_ub435q_v3_leds[] = { 602 { 603 .role = EM28XX_LED_DIGITAL_CAPTURING, 604 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 605 .gpio_mask = 0x80, 606 .inverted = 1, 607 }, 608 {-1, 0, 0, 0}, 609 }; 610 611 static struct em28xx_led pctv_80e_leds[] = { 612 { 613 .role = EM28XX_LED_DIGITAL_CAPTURING, 614 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 615 .gpio_mask = 0x80, 616 .inverted = 0, 617 }, 618 {-1, 0, 0, 0}, 619 }; 620 621 static struct em28xx_led terratec_grabby_leds[] = { 622 { 623 .role = EM28XX_LED_ANALOG_CAPTURING, 624 .gpio_reg = EM2820_R08_GPIO_CTRL, 625 .gpio_mask = EM_GPIO_3, 626 .inverted = 1, 627 }, 628 {-1, 0, 0, 0}, 629 }; 630 631 static struct em28xx_led hauppauge_dualhd_leds[] = { 632 { 633 .role = EM28XX_LED_DIGITAL_CAPTURING, 634 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 635 .gpio_mask = EM_GPIO_1, 636 .inverted = 1, 637 }, 638 { 639 .role = EM28XX_LED_DIGITAL_CAPTURING_TS2, 640 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 641 .gpio_mask = EM_GPIO_3, 642 .inverted = 1, 643 }, 644 {-1, 0, 0, 0}, 645 }; 646 647 /* 648 * Board definitions 649 */ 650 const struct em28xx_board em28xx_boards[] = { 651 [EM2750_BOARD_UNKNOWN] = { 652 .name = "EM2710/EM2750/EM2751 webcam grabber", 653 .xclk = EM28XX_XCLK_FREQUENCY_20MHZ, 654 .tuner_type = TUNER_ABSENT, 655 .is_webcam = 1, 656 .input = { { 657 .type = EM28XX_VMUX_COMPOSITE, 658 .vmux = 0, 659 .amux = EM28XX_AMUX_VIDEO, 660 .gpio = silvercrest_reg_seq, 661 } }, 662 }, 663 [EM2800_BOARD_UNKNOWN] = { 664 .name = "Unknown EM2800 video grabber", 665 .is_em2800 = 1, 666 .tda9887_conf = TDA9887_PRESENT, 667 .decoder = EM28XX_SAA711X, 668 .tuner_type = TUNER_ABSENT, 669 .input = { { 670 .type = EM28XX_VMUX_COMPOSITE, 671 .vmux = SAA7115_COMPOSITE0, 672 .amux = EM28XX_AMUX_LINE_IN, 673 }, { 674 .type = EM28XX_VMUX_SVIDEO, 675 .vmux = SAA7115_SVIDEO3, 676 .amux = EM28XX_AMUX_LINE_IN, 677 } }, 678 }, 679 [EM2820_BOARD_UNKNOWN] = { 680 .name = "Unknown EM2750/28xx video grabber", 681 .tuner_type = TUNER_ABSENT, 682 .is_webcam = 1, /* To enable sensor probe */ 683 }, 684 [EM2882_BOARD_ZOLID_HYBRID_TV_STICK] = { 685 .name = ":ZOLID HYBRID TV STICK", 686 .tuner_type = TUNER_XC2028, 687 .tuner_gpio = zolid_tuner, 688 .decoder = EM28XX_TVP5150, 689 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 690 .mts_firmware = 1, 691 .has_dvb = 1, 692 .dvb_gpio = zolid_digital, 693 }, 694 [EM2750_BOARD_DLCW_130] = { 695 /* Beijing Huaqi Information Digital Technology Co., Ltd */ 696 .name = "Huaqi DLCW-130", 697 .valid = EM28XX_BOARD_NOT_VALIDATED, 698 .xclk = EM28XX_XCLK_FREQUENCY_48MHZ, 699 .tuner_type = TUNER_ABSENT, 700 .is_webcam = 1, 701 .input = { { 702 .type = EM28XX_VMUX_COMPOSITE, 703 .vmux = 0, 704 .amux = EM28XX_AMUX_VIDEO, 705 } }, 706 }, 707 [EM2820_BOARD_KWORLD_PVRTV2800RF] = { 708 .name = "Kworld PVR TV 2800 RF", 709 .tuner_type = TUNER_TEMIC_PAL, 710 .tda9887_conf = TDA9887_PRESENT, 711 .decoder = EM28XX_SAA711X, 712 .input = { { 713 .type = EM28XX_VMUX_COMPOSITE, 714 .vmux = SAA7115_COMPOSITE0, 715 .amux = EM28XX_AMUX_LINE_IN, 716 }, { 717 .type = EM28XX_VMUX_SVIDEO, 718 .vmux = SAA7115_SVIDEO3, 719 .amux = EM28XX_AMUX_LINE_IN, 720 } }, 721 }, 722 [EM2820_BOARD_GADMEI_TVR200] = { 723 .name = "Gadmei TVR200", 724 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 725 .tda9887_conf = TDA9887_PRESENT, 726 .decoder = EM28XX_SAA711X, 727 .input = { { 728 .type = EM28XX_VMUX_TELEVISION, 729 .vmux = SAA7115_COMPOSITE2, 730 .amux = EM28XX_AMUX_LINE_IN, 731 }, { 732 .type = EM28XX_VMUX_COMPOSITE, 733 .vmux = SAA7115_COMPOSITE0, 734 .amux = EM28XX_AMUX_LINE_IN, 735 }, { 736 .type = EM28XX_VMUX_SVIDEO, 737 .vmux = SAA7115_SVIDEO3, 738 .amux = EM28XX_AMUX_LINE_IN, 739 } }, 740 }, 741 [EM2820_BOARD_TERRATEC_CINERGY_250] = { 742 .name = "Terratec Cinergy 250 USB", 743 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 744 .has_ir_i2c = 1, 745 .tda9887_conf = TDA9887_PRESENT, 746 .decoder = EM28XX_SAA711X, 747 .input = { { 748 .type = EM28XX_VMUX_TELEVISION, 749 .vmux = SAA7115_COMPOSITE2, 750 .amux = EM28XX_AMUX_VIDEO, 751 }, { 752 .type = EM28XX_VMUX_COMPOSITE, 753 .vmux = SAA7115_COMPOSITE0, 754 .amux = EM28XX_AMUX_LINE_IN, 755 }, { 756 .type = EM28XX_VMUX_SVIDEO, 757 .vmux = SAA7115_SVIDEO3, 758 .amux = EM28XX_AMUX_LINE_IN, 759 } }, 760 }, 761 [EM2820_BOARD_PINNACLE_USB_2] = { 762 .name = "Pinnacle PCTV USB 2", 763 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 764 .has_ir_i2c = 1, 765 .tda9887_conf = TDA9887_PRESENT, 766 .decoder = EM28XX_SAA711X, 767 .input = { { 768 .type = EM28XX_VMUX_TELEVISION, 769 .vmux = SAA7115_COMPOSITE2, 770 .amux = EM28XX_AMUX_VIDEO, 771 }, { 772 .type = EM28XX_VMUX_COMPOSITE, 773 .vmux = SAA7115_COMPOSITE0, 774 .amux = EM28XX_AMUX_LINE_IN, 775 }, { 776 .type = EM28XX_VMUX_SVIDEO, 777 .vmux = SAA7115_SVIDEO3, 778 .amux = EM28XX_AMUX_LINE_IN, 779 } }, 780 }, 781 [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = { 782 .name = "Hauppauge WinTV USB 2", 783 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 784 .tda9887_conf = TDA9887_PRESENT | 785 TDA9887_PORT1_ACTIVE | 786 TDA9887_PORT2_ACTIVE, 787 .decoder = EM28XX_TVP5150, 788 .has_msp34xx = 1, 789 .has_ir_i2c = 1, 790 .input = { { 791 .type = EM28XX_VMUX_TELEVISION, 792 .vmux = TVP5150_COMPOSITE0, 793 .amux = MSP_INPUT_DEFAULT, 794 }, { 795 .type = EM28XX_VMUX_SVIDEO, 796 .vmux = TVP5150_SVIDEO, 797 .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1, 798 MSP_DSP_IN_SCART, MSP_DSP_IN_SCART), 799 } }, 800 }, 801 [EM2820_BOARD_DLINK_USB_TV] = { 802 .name = "D-Link DUB-T210 TV Tuner", 803 .valid = EM28XX_BOARD_NOT_VALIDATED, 804 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 805 .tda9887_conf = TDA9887_PRESENT, 806 .decoder = EM28XX_SAA711X, 807 .input = { { 808 .type = EM28XX_VMUX_TELEVISION, 809 .vmux = SAA7115_COMPOSITE2, 810 .amux = EM28XX_AMUX_LINE_IN, 811 }, { 812 .type = EM28XX_VMUX_COMPOSITE, 813 .vmux = SAA7115_COMPOSITE0, 814 .amux = EM28XX_AMUX_LINE_IN, 815 }, { 816 .type = EM28XX_VMUX_SVIDEO, 817 .vmux = SAA7115_SVIDEO3, 818 .amux = EM28XX_AMUX_LINE_IN, 819 } }, 820 }, 821 [EM2820_BOARD_HERCULES_SMART_TV_USB2] = { 822 .name = "Hercules Smart TV USB 2.0", 823 .valid = EM28XX_BOARD_NOT_VALIDATED, 824 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 825 .tda9887_conf = TDA9887_PRESENT, 826 .decoder = EM28XX_SAA711X, 827 .input = { { 828 .type = EM28XX_VMUX_TELEVISION, 829 .vmux = SAA7115_COMPOSITE2, 830 .amux = EM28XX_AMUX_LINE_IN, 831 }, { 832 .type = EM28XX_VMUX_COMPOSITE, 833 .vmux = SAA7115_COMPOSITE0, 834 .amux = EM28XX_AMUX_LINE_IN, 835 }, { 836 .type = EM28XX_VMUX_SVIDEO, 837 .vmux = SAA7115_SVIDEO3, 838 .amux = EM28XX_AMUX_LINE_IN, 839 } }, 840 }, 841 [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = { 842 .name = "Pinnacle PCTV USB 2 (Philips FM1216ME)", 843 .valid = EM28XX_BOARD_NOT_VALIDATED, 844 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, 845 .tda9887_conf = TDA9887_PRESENT, 846 .decoder = EM28XX_SAA711X, 847 .input = { { 848 .type = EM28XX_VMUX_TELEVISION, 849 .vmux = SAA7115_COMPOSITE2, 850 .amux = EM28XX_AMUX_VIDEO, 851 }, { 852 .type = EM28XX_VMUX_COMPOSITE, 853 .vmux = SAA7115_COMPOSITE0, 854 .amux = EM28XX_AMUX_LINE_IN, 855 }, { 856 .type = EM28XX_VMUX_SVIDEO, 857 .vmux = SAA7115_SVIDEO3, 858 .amux = EM28XX_AMUX_LINE_IN, 859 } }, 860 }, 861 [EM2820_BOARD_GADMEI_UTV310] = { 862 .name = "Gadmei UTV310", 863 .valid = EM28XX_BOARD_NOT_VALIDATED, 864 .tuner_type = TUNER_TNF_5335MF, 865 .tda9887_conf = TDA9887_PRESENT, 866 .decoder = EM28XX_SAA711X, 867 .input = { { 868 .type = EM28XX_VMUX_TELEVISION, 869 .vmux = SAA7115_COMPOSITE1, 870 .amux = EM28XX_AMUX_LINE_IN, 871 }, { 872 .type = EM28XX_VMUX_COMPOSITE, 873 .vmux = SAA7115_COMPOSITE0, 874 .amux = EM28XX_AMUX_LINE_IN, 875 }, { 876 .type = EM28XX_VMUX_SVIDEO, 877 .vmux = SAA7115_SVIDEO3, 878 .amux = EM28XX_AMUX_LINE_IN, 879 } }, 880 }, 881 [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = { 882 .name = "Leadtek Winfast USB II Deluxe", 883 .valid = EM28XX_BOARD_NOT_VALIDATED, 884 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, 885 .has_ir_i2c = 1, 886 .tvaudio_addr = 0x58, 887 .tda9887_conf = TDA9887_PRESENT | 888 TDA9887_PORT2_ACTIVE | 889 TDA9887_QSS, 890 .decoder = EM28XX_SAA711X, 891 .adecoder = EM28XX_TVAUDIO, 892 .input = { { 893 .type = EM28XX_VMUX_TELEVISION, 894 .vmux = SAA7115_COMPOSITE4, 895 .amux = EM28XX_AMUX_AUX, 896 }, { 897 .type = EM28XX_VMUX_COMPOSITE, 898 .vmux = SAA7115_COMPOSITE5, 899 .amux = EM28XX_AMUX_LINE_IN, 900 }, { 901 .type = EM28XX_VMUX_SVIDEO, 902 .vmux = SAA7115_SVIDEO3, 903 .amux = EM28XX_AMUX_LINE_IN, 904 } }, 905 .radio = { 906 .type = EM28XX_RADIO, 907 .amux = EM28XX_AMUX_AUX, 908 } 909 }, 910 [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = { 911 .name = "Videology 20K14XUSB USB2.0", 912 .valid = EM28XX_BOARD_NOT_VALIDATED, 913 .tuner_type = TUNER_ABSENT, 914 .is_webcam = 1, 915 .input = { { 916 .type = EM28XX_VMUX_COMPOSITE, 917 .vmux = 0, 918 .amux = EM28XX_AMUX_VIDEO, 919 } }, 920 }, 921 [EM2820_BOARD_SILVERCREST_WEBCAM] = { 922 .name = "Silvercrest Webcam 1.3mpix", 923 .tuner_type = TUNER_ABSENT, 924 .is_webcam = 1, 925 .input = { { 926 .type = EM28XX_VMUX_COMPOSITE, 927 .vmux = 0, 928 .amux = EM28XX_AMUX_VIDEO, 929 .gpio = silvercrest_reg_seq, 930 } }, 931 }, 932 [EM2821_BOARD_SUPERCOMP_USB_2] = { 933 .name = "Supercomp USB 2.0 TV", 934 .valid = EM28XX_BOARD_NOT_VALIDATED, 935 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 936 .tda9887_conf = TDA9887_PRESENT | 937 TDA9887_PORT1_ACTIVE | 938 TDA9887_PORT2_ACTIVE, 939 .decoder = EM28XX_SAA711X, 940 .input = { { 941 .type = EM28XX_VMUX_TELEVISION, 942 .vmux = SAA7115_COMPOSITE2, 943 .amux = EM28XX_AMUX_LINE_IN, 944 }, { 945 .type = EM28XX_VMUX_COMPOSITE, 946 .vmux = SAA7115_COMPOSITE0, 947 .amux = EM28XX_AMUX_VIDEO, 948 }, { 949 .type = EM28XX_VMUX_SVIDEO, 950 .vmux = SAA7115_SVIDEO3, 951 .amux = EM28XX_AMUX_LINE_IN, 952 } }, 953 }, 954 [EM2821_BOARD_USBGEAR_VD204] = { 955 .name = "Usbgear VD204v9", 956 .valid = EM28XX_BOARD_NOT_VALIDATED, 957 .tuner_type = TUNER_ABSENT, /* Capture only device */ 958 .decoder = EM28XX_SAA711X, 959 .input = { { 960 .type = EM28XX_VMUX_COMPOSITE, 961 .vmux = SAA7115_COMPOSITE0, 962 .amux = EM28XX_AMUX_LINE_IN, 963 }, { 964 .type = EM28XX_VMUX_SVIDEO, 965 .vmux = SAA7115_SVIDEO3, 966 .amux = EM28XX_AMUX_LINE_IN, 967 } }, 968 }, 969 [EM2860_BOARD_NETGMBH_CAM] = { 970 /* Beijing Huaqi Information Digital Technology Co., Ltd */ 971 .name = "NetGMBH Cam", 972 .valid = EM28XX_BOARD_NOT_VALIDATED, 973 .tuner_type = TUNER_ABSENT, 974 .is_webcam = 1, 975 .input = { { 976 .type = EM28XX_VMUX_COMPOSITE, 977 .vmux = 0, 978 .amux = EM28XX_AMUX_VIDEO, 979 } }, 980 }, 981 [EM2860_BOARD_TYPHOON_DVD_MAKER] = { 982 .name = "Typhoon DVD Maker", 983 .decoder = EM28XX_SAA711X, 984 .tuner_type = TUNER_ABSENT, /* Capture only device */ 985 .input = { { 986 .type = EM28XX_VMUX_COMPOSITE, 987 .vmux = SAA7115_COMPOSITE0, 988 .amux = EM28XX_AMUX_LINE_IN, 989 }, { 990 .type = EM28XX_VMUX_SVIDEO, 991 .vmux = SAA7115_SVIDEO3, 992 .amux = EM28XX_AMUX_LINE_IN, 993 } }, 994 }, 995 [EM2860_BOARD_GADMEI_UTV330] = { 996 .name = "Gadmei UTV330", 997 .valid = EM28XX_BOARD_NOT_VALIDATED, 998 .tuner_type = TUNER_TNF_5335MF, 999 .tda9887_conf = TDA9887_PRESENT, 1000 .decoder = EM28XX_SAA711X, 1001 .input = { { 1002 .type = EM28XX_VMUX_TELEVISION, 1003 .vmux = SAA7115_COMPOSITE2, 1004 .amux = EM28XX_AMUX_VIDEO, 1005 }, { 1006 .type = EM28XX_VMUX_COMPOSITE, 1007 .vmux = SAA7115_COMPOSITE0, 1008 .amux = EM28XX_AMUX_LINE_IN, 1009 }, { 1010 .type = EM28XX_VMUX_SVIDEO, 1011 .vmux = SAA7115_SVIDEO3, 1012 .amux = EM28XX_AMUX_LINE_IN, 1013 } }, 1014 }, 1015 [EM2861_BOARD_GADMEI_UTV330PLUS] = { 1016 .name = "Gadmei UTV330+", 1017 .tuner_type = TUNER_TNF_5335MF, 1018 .tda9887_conf = TDA9887_PRESENT, 1019 .ir_codes = RC_MAP_GADMEI_RM008Z, 1020 .decoder = EM28XX_SAA711X, 1021 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1022 .input = { { 1023 .type = EM28XX_VMUX_TELEVISION, 1024 .vmux = SAA7115_COMPOSITE2, 1025 .amux = EM28XX_AMUX_VIDEO, 1026 }, { 1027 .type = EM28XX_VMUX_COMPOSITE, 1028 .vmux = SAA7115_COMPOSITE0, 1029 .amux = EM28XX_AMUX_LINE_IN, 1030 }, { 1031 .type = EM28XX_VMUX_SVIDEO, 1032 .vmux = SAA7115_SVIDEO3, 1033 .amux = EM28XX_AMUX_LINE_IN, 1034 } }, 1035 }, 1036 [EM2860_BOARD_TERRATEC_HYBRID_XS] = { 1037 .name = "Terratec Cinergy A Hybrid XS", 1038 .valid = EM28XX_BOARD_NOT_VALIDATED, 1039 .tuner_type = TUNER_XC2028, 1040 .tuner_gpio = default_tuner_gpio, 1041 .decoder = EM28XX_TVP5150, 1042 1043 .input = { { 1044 .type = EM28XX_VMUX_TELEVISION, 1045 .vmux = TVP5150_COMPOSITE0, 1046 .amux = EM28XX_AMUX_VIDEO, 1047 .gpio = hauppauge_wintv_hvr_900_analog, 1048 }, { 1049 .type = EM28XX_VMUX_COMPOSITE, 1050 .vmux = TVP5150_COMPOSITE1, 1051 .amux = EM28XX_AMUX_LINE_IN, 1052 .gpio = hauppauge_wintv_hvr_900_analog, 1053 }, { 1054 .type = EM28XX_VMUX_SVIDEO, 1055 .vmux = TVP5150_SVIDEO, 1056 .amux = EM28XX_AMUX_LINE_IN, 1057 .gpio = hauppauge_wintv_hvr_900_analog, 1058 } }, 1059 }, 1060 [EM2861_BOARD_KWORLD_PVRTV_300U] = { 1061 .name = "KWorld PVRTV 300U", 1062 .valid = EM28XX_BOARD_NOT_VALIDATED, 1063 .tuner_type = TUNER_XC2028, 1064 .tuner_gpio = default_tuner_gpio, 1065 .decoder = EM28XX_TVP5150, 1066 .input = { { 1067 .type = EM28XX_VMUX_TELEVISION, 1068 .vmux = TVP5150_COMPOSITE0, 1069 .amux = EM28XX_AMUX_VIDEO, 1070 }, { 1071 .type = EM28XX_VMUX_COMPOSITE, 1072 .vmux = TVP5150_COMPOSITE1, 1073 .amux = EM28XX_AMUX_LINE_IN, 1074 }, { 1075 .type = EM28XX_VMUX_SVIDEO, 1076 .vmux = TVP5150_SVIDEO, 1077 .amux = EM28XX_AMUX_LINE_IN, 1078 } }, 1079 }, 1080 [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = { 1081 .name = "Yakumo MovieMixer", 1082 .tuner_type = TUNER_ABSENT, /* Capture only device */ 1083 .decoder = EM28XX_TVP5150, 1084 .input = { { 1085 .type = EM28XX_VMUX_TELEVISION, 1086 .vmux = TVP5150_COMPOSITE0, 1087 .amux = EM28XX_AMUX_VIDEO, 1088 }, { 1089 .type = EM28XX_VMUX_COMPOSITE, 1090 .vmux = TVP5150_COMPOSITE1, 1091 .amux = EM28XX_AMUX_LINE_IN, 1092 }, { 1093 .type = EM28XX_VMUX_SVIDEO, 1094 .vmux = TVP5150_SVIDEO, 1095 .amux = EM28XX_AMUX_LINE_IN, 1096 } }, 1097 }, 1098 [EM2860_BOARD_TVP5150_REFERENCE_DESIGN] = { 1099 .name = "EM2860/TVP5150 Reference Design", 1100 .tuner_type = TUNER_ABSENT, /* Capture only device */ 1101 .decoder = EM28XX_TVP5150, 1102 .input = { { 1103 .type = EM28XX_VMUX_COMPOSITE, 1104 .vmux = TVP5150_COMPOSITE1, 1105 .amux = EM28XX_AMUX_LINE_IN, 1106 }, { 1107 .type = EM28XX_VMUX_SVIDEO, 1108 .vmux = TVP5150_SVIDEO, 1109 .amux = EM28XX_AMUX_LINE_IN, 1110 } }, 1111 }, 1112 [EM2861_BOARD_PLEXTOR_PX_TV100U] = { 1113 .name = "Plextor ConvertX PX-TV100U", 1114 .tuner_type = TUNER_TNF_5335MF, 1115 .xclk = EM28XX_XCLK_I2S_MSB_TIMING | 1116 EM28XX_XCLK_FREQUENCY_12MHZ, 1117 .tda9887_conf = TDA9887_PRESENT, 1118 .decoder = EM28XX_TVP5150, 1119 .has_msp34xx = 1, 1120 .input = { { 1121 .type = EM28XX_VMUX_TELEVISION, 1122 .vmux = TVP5150_COMPOSITE0, 1123 .amux = EM28XX_AMUX_LINE_IN, 1124 .gpio = pinnacle_hybrid_pro_analog, 1125 }, { 1126 .type = EM28XX_VMUX_COMPOSITE, 1127 .vmux = TVP5150_COMPOSITE1, 1128 .amux = EM28XX_AMUX_LINE_IN, 1129 .gpio = pinnacle_hybrid_pro_analog, 1130 }, { 1131 .type = EM28XX_VMUX_SVIDEO, 1132 .vmux = TVP5150_SVIDEO, 1133 .amux = EM28XX_AMUX_LINE_IN, 1134 .gpio = pinnacle_hybrid_pro_analog, 1135 } }, 1136 }, 1137 1138 /* Those boards with em2870 are DVB Only*/ 1139 1140 [EM2870_BOARD_TERRATEC_XS] = { 1141 .name = "Terratec Cinergy T XS", 1142 .valid = EM28XX_BOARD_NOT_VALIDATED, 1143 .tuner_type = TUNER_XC2028, 1144 .tuner_gpio = default_tuner_gpio, 1145 }, 1146 [EM2870_BOARD_TERRATEC_XS_MT2060] = { 1147 .name = "Terratec Cinergy T XS (MT2060)", 1148 .xclk = EM28XX_XCLK_IR_RC5_MODE | 1149 EM28XX_XCLK_FREQUENCY_12MHZ, 1150 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 1151 .tuner_type = TUNER_ABSENT, /* MT2060 */ 1152 .has_dvb = 1, 1153 .tuner_gpio = default_tuner_gpio, 1154 }, 1155 [EM2870_BOARD_KWORLD_350U] = { 1156 .name = "Kworld 350 U DVB-T", 1157 .valid = EM28XX_BOARD_NOT_VALIDATED, 1158 .tuner_type = TUNER_XC2028, 1159 .tuner_gpio = default_tuner_gpio, 1160 }, 1161 [EM2870_BOARD_KWORLD_355U] = { 1162 .name = "Kworld 355 U DVB-T", 1163 .valid = EM28XX_BOARD_NOT_VALIDATED, 1164 .tuner_type = TUNER_ABSENT, 1165 .tuner_gpio = default_tuner_gpio, 1166 .has_dvb = 1, 1167 .dvb_gpio = default_digital, 1168 }, 1169 [EM2870_BOARD_PINNACLE_PCTV_DVB] = { 1170 .name = "Pinnacle PCTV DVB-T", 1171 .valid = EM28XX_BOARD_NOT_VALIDATED, 1172 .tuner_type = TUNER_ABSENT, /* MT2060 */ 1173 /* djh - I have serious doubts this is right... */ 1174 .xclk = EM28XX_XCLK_IR_RC5_MODE | 1175 EM28XX_XCLK_FREQUENCY_10MHZ, 1176 }, 1177 [EM2870_BOARD_COMPRO_VIDEOMATE] = { 1178 .name = "Compro, VideoMate U3", 1179 .valid = EM28XX_BOARD_NOT_VALIDATED, 1180 .tuner_type = TUNER_ABSENT, /* MT2060 */ 1181 }, 1182 1183 [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = { 1184 .name = "Terratec Hybrid XS Secam", 1185 .has_msp34xx = 1, 1186 .tuner_type = TUNER_XC2028, 1187 .tuner_gpio = default_tuner_gpio, 1188 .decoder = EM28XX_TVP5150, 1189 .has_dvb = 1, 1190 .dvb_gpio = terratec_cinergy_USB_XS_FR_digital, 1191 .input = { { 1192 .type = EM28XX_VMUX_TELEVISION, 1193 .vmux = TVP5150_COMPOSITE0, 1194 .amux = EM28XX_AMUX_VIDEO, 1195 .gpio = terratec_cinergy_USB_XS_FR_analog, 1196 }, { 1197 .type = EM28XX_VMUX_COMPOSITE, 1198 .vmux = TVP5150_COMPOSITE1, 1199 .amux = EM28XX_AMUX_LINE_IN, 1200 .gpio = terratec_cinergy_USB_XS_FR_analog, 1201 }, { 1202 .type = EM28XX_VMUX_SVIDEO, 1203 .vmux = TVP5150_SVIDEO, 1204 .amux = EM28XX_AMUX_LINE_IN, 1205 .gpio = terratec_cinergy_USB_XS_FR_analog, 1206 } }, 1207 }, 1208 [EM2884_BOARD_TERRATEC_H5] = { 1209 .name = "Terratec Cinergy H5", 1210 .has_dvb = 1, 1211 #if 0 1212 .tuner_type = TUNER_PHILIPS_TDA8290, 1213 .tuner_addr = 0x41, 1214 .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */ 1215 .tuner_gpio = terratec_h5_gpio, 1216 #else 1217 .tuner_type = TUNER_ABSENT, 1218 #endif 1219 .def_i2c_bus = 1, 1220 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1221 EM28XX_I2C_FREQ_400_KHZ, 1222 }, 1223 [EM2884_BOARD_TERRATEC_H6] = { 1224 .name = "Terratec Cinergy H6 rev. 2", 1225 .has_dvb = 1, 1226 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, 1227 #if 0 1228 .tuner_type = TUNER_PHILIPS_TDA8290, 1229 .tuner_addr = 0x41, 1230 .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */ 1231 .tuner_gpio = terratec_h5_gpio, 1232 #else 1233 .tuner_type = TUNER_ABSENT, 1234 #endif 1235 .def_i2c_bus = 1, 1236 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1237 EM28XX_I2C_FREQ_400_KHZ, 1238 }, 1239 [EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = { 1240 .name = "Hauppauge WinTV HVR 930C", 1241 .has_dvb = 1, 1242 #if 0 /* FIXME: Add analog support */ 1243 .tuner_type = TUNER_XC5000, 1244 .tuner_addr = 0x41, 1245 .dvb_gpio = hauppauge_930c_digital, 1246 .tuner_gpio = hauppauge_930c_gpio, 1247 #else 1248 .tuner_type = TUNER_ABSENT, 1249 #endif 1250 .ir_codes = RC_MAP_HAUPPAUGE, 1251 .def_i2c_bus = 1, 1252 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1253 EM28XX_I2C_FREQ_400_KHZ, 1254 }, 1255 [EM2884_BOARD_C3TECH_DIGITAL_DUO] = { 1256 .name = "C3 Tech Digital Duo HDTV/SDTV USB", 1257 .has_dvb = 1, 1258 /* FIXME: Add analog support - need a saa7136 driver */ 1259 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */ 1260 .ir_codes = RC_MAP_EMPTY, 1261 .def_i2c_bus = 1, 1262 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 1263 .dvb_gpio = c3tech_digital_duo_digital, 1264 }, 1265 [EM2884_BOARD_CINERGY_HTC_STICK] = { 1266 .name = "Terratec Cinergy HTC Stick", 1267 .has_dvb = 1, 1268 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, 1269 .tuner_type = TUNER_ABSENT, 1270 .def_i2c_bus = 1, 1271 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1272 EM28XX_I2C_FREQ_400_KHZ, 1273 }, 1274 [EM2884_BOARD_ELGATO_EYETV_HYBRID_2008] = { 1275 .name = "Elgato EyeTV Hybrid 2008 INT", 1276 .has_dvb = 1, 1277 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, 1278 .tuner_type = TUNER_ABSENT, 1279 .def_i2c_bus = 1, 1280 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1281 EM28XX_I2C_FREQ_400_KHZ, 1282 }, 1283 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = { 1284 .name = "Hauppauge WinTV HVR 900", 1285 .tda9887_conf = TDA9887_PRESENT, 1286 .tuner_type = TUNER_XC2028, 1287 .tuner_gpio = default_tuner_gpio, 1288 .mts_firmware = 1, 1289 .has_dvb = 1, 1290 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1291 .ir_codes = RC_MAP_HAUPPAUGE, 1292 .decoder = EM28XX_TVP5150, 1293 .input = { { 1294 .type = EM28XX_VMUX_TELEVISION, 1295 .vmux = TVP5150_COMPOSITE0, 1296 .amux = EM28XX_AMUX_VIDEO, 1297 .gpio = hauppauge_wintv_hvr_900_analog, 1298 }, { 1299 .type = EM28XX_VMUX_COMPOSITE, 1300 .vmux = TVP5150_COMPOSITE1, 1301 .amux = EM28XX_AMUX_LINE_IN, 1302 .gpio = hauppauge_wintv_hvr_900_analog, 1303 }, { 1304 .type = EM28XX_VMUX_SVIDEO, 1305 .vmux = TVP5150_SVIDEO, 1306 .amux = EM28XX_AMUX_LINE_IN, 1307 .gpio = hauppauge_wintv_hvr_900_analog, 1308 } }, 1309 }, 1310 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = { 1311 .name = "Hauppauge WinTV HVR 900 (R2)", 1312 .tda9887_conf = TDA9887_PRESENT, 1313 .tuner_type = TUNER_XC2028, 1314 .tuner_gpio = default_tuner_gpio, 1315 .mts_firmware = 1, 1316 .has_dvb = 1, 1317 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, 1318 .ir_codes = RC_MAP_HAUPPAUGE, 1319 .decoder = EM28XX_TVP5150, 1320 .input = { { 1321 .type = EM28XX_VMUX_TELEVISION, 1322 .vmux = TVP5150_COMPOSITE0, 1323 .amux = EM28XX_AMUX_VIDEO, 1324 .gpio = hauppauge_wintv_hvr_900_analog, 1325 }, { 1326 .type = EM28XX_VMUX_COMPOSITE, 1327 .vmux = TVP5150_COMPOSITE1, 1328 .amux = EM28XX_AMUX_LINE_IN, 1329 .gpio = hauppauge_wintv_hvr_900_analog, 1330 }, { 1331 .type = EM28XX_VMUX_SVIDEO, 1332 .vmux = TVP5150_SVIDEO, 1333 .amux = EM28XX_AMUX_LINE_IN, 1334 .gpio = hauppauge_wintv_hvr_900_analog, 1335 } }, 1336 }, 1337 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = { 1338 .name = "Hauppauge WinTV HVR 850", 1339 .tuner_type = TUNER_XC2028, 1340 .tuner_gpio = default_tuner_gpio, 1341 .mts_firmware = 1, 1342 .has_dvb = 1, 1343 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1344 .ir_codes = RC_MAP_HAUPPAUGE, 1345 .decoder = EM28XX_TVP5150, 1346 .input = { { 1347 .type = EM28XX_VMUX_TELEVISION, 1348 .vmux = TVP5150_COMPOSITE0, 1349 .amux = EM28XX_AMUX_VIDEO, 1350 .gpio = hauppauge_wintv_hvr_900_analog, 1351 }, { 1352 .type = EM28XX_VMUX_COMPOSITE, 1353 .vmux = TVP5150_COMPOSITE1, 1354 .amux = EM28XX_AMUX_LINE_IN, 1355 .gpio = hauppauge_wintv_hvr_900_analog, 1356 }, { 1357 .type = EM28XX_VMUX_SVIDEO, 1358 .vmux = TVP5150_SVIDEO, 1359 .amux = EM28XX_AMUX_LINE_IN, 1360 .gpio = hauppauge_wintv_hvr_900_analog, 1361 } }, 1362 }, 1363 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = { 1364 .name = "Hauppauge WinTV HVR 950", 1365 .tuner_type = TUNER_XC2028, 1366 .tuner_gpio = default_tuner_gpio, 1367 .mts_firmware = 1, 1368 .has_dvb = 1, 1369 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1370 .ir_codes = RC_MAP_HAUPPAUGE, 1371 .decoder = EM28XX_TVP5150, 1372 .input = { { 1373 .type = EM28XX_VMUX_TELEVISION, 1374 .vmux = TVP5150_COMPOSITE0, 1375 .amux = EM28XX_AMUX_VIDEO, 1376 .gpio = hauppauge_wintv_hvr_900_analog, 1377 }, { 1378 .type = EM28XX_VMUX_COMPOSITE, 1379 .vmux = TVP5150_COMPOSITE1, 1380 .amux = EM28XX_AMUX_LINE_IN, 1381 .gpio = hauppauge_wintv_hvr_900_analog, 1382 }, { 1383 .type = EM28XX_VMUX_SVIDEO, 1384 .vmux = TVP5150_SVIDEO, 1385 .amux = EM28XX_AMUX_LINE_IN, 1386 .gpio = hauppauge_wintv_hvr_900_analog, 1387 } }, 1388 }, 1389 [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = { 1390 .name = "Pinnacle PCTV HD Pro Stick", 1391 .tuner_type = TUNER_XC2028, 1392 .tuner_gpio = default_tuner_gpio, 1393 .mts_firmware = 1, 1394 .has_dvb = 1, 1395 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1396 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 1397 .decoder = EM28XX_TVP5150, 1398 .input = { { 1399 .type = EM28XX_VMUX_TELEVISION, 1400 .vmux = TVP5150_COMPOSITE0, 1401 .amux = EM28XX_AMUX_VIDEO, 1402 .gpio = hauppauge_wintv_hvr_900_analog, 1403 }, { 1404 .type = EM28XX_VMUX_COMPOSITE, 1405 .vmux = TVP5150_COMPOSITE1, 1406 .amux = EM28XX_AMUX_LINE_IN, 1407 .gpio = hauppauge_wintv_hvr_900_analog, 1408 }, { 1409 .type = EM28XX_VMUX_SVIDEO, 1410 .vmux = TVP5150_SVIDEO, 1411 .amux = EM28XX_AMUX_LINE_IN, 1412 .gpio = hauppauge_wintv_hvr_900_analog, 1413 } }, 1414 }, 1415 [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = { 1416 .name = "AMD ATI TV Wonder HD 600", 1417 .tuner_type = TUNER_XC2028, 1418 .tuner_gpio = default_tuner_gpio, 1419 .mts_firmware = 1, 1420 .has_dvb = 1, 1421 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1422 .ir_codes = RC_MAP_ATI_TV_WONDER_HD_600, 1423 .decoder = EM28XX_TVP5150, 1424 .input = { { 1425 .type = EM28XX_VMUX_TELEVISION, 1426 .vmux = TVP5150_COMPOSITE0, 1427 .amux = EM28XX_AMUX_VIDEO, 1428 .gpio = hauppauge_wintv_hvr_900_analog, 1429 }, { 1430 .type = EM28XX_VMUX_COMPOSITE, 1431 .vmux = TVP5150_COMPOSITE1, 1432 .amux = EM28XX_AMUX_LINE_IN, 1433 .gpio = hauppauge_wintv_hvr_900_analog, 1434 }, { 1435 .type = EM28XX_VMUX_SVIDEO, 1436 .vmux = TVP5150_SVIDEO, 1437 .amux = EM28XX_AMUX_LINE_IN, 1438 .gpio = hauppauge_wintv_hvr_900_analog, 1439 } }, 1440 }, 1441 [EM2880_BOARD_TERRATEC_HYBRID_XS] = { 1442 .name = "Terratec Hybrid XS", 1443 .tuner_type = TUNER_XC2028, 1444 .tuner_gpio = default_tuner_gpio, 1445 .decoder = EM28XX_TVP5150, 1446 .has_dvb = 1, 1447 .dvb_gpio = default_digital, 1448 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS, 1449 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 1450 .input = { { 1451 .type = EM28XX_VMUX_TELEVISION, 1452 .vmux = TVP5150_COMPOSITE0, 1453 .amux = EM28XX_AMUX_VIDEO, 1454 .gpio = default_analog, 1455 }, { 1456 .type = EM28XX_VMUX_COMPOSITE, 1457 .vmux = TVP5150_COMPOSITE1, 1458 .amux = EM28XX_AMUX_LINE_IN, 1459 .gpio = default_analog, 1460 }, { 1461 .type = EM28XX_VMUX_SVIDEO, 1462 .vmux = TVP5150_SVIDEO, 1463 .amux = EM28XX_AMUX_LINE_IN, 1464 .gpio = default_analog, 1465 } }, 1466 }, 1467 /* 1468 * maybe there's a reason behind it why Terratec sells the Hybrid XS 1469 * as Prodigy XS with a different PID, let's keep it separated for now 1470 * maybe we'll need it later on 1471 */ 1472 [EM2880_BOARD_TERRATEC_PRODIGY_XS] = { 1473 .name = "Terratec Prodigy XS", 1474 .tuner_type = TUNER_XC2028, 1475 .tuner_gpio = default_tuner_gpio, 1476 .decoder = EM28XX_TVP5150, 1477 .input = { { 1478 .type = EM28XX_VMUX_TELEVISION, 1479 .vmux = TVP5150_COMPOSITE0, 1480 .amux = EM28XX_AMUX_VIDEO, 1481 .gpio = hauppauge_wintv_hvr_900_analog, 1482 }, { 1483 .type = EM28XX_VMUX_COMPOSITE, 1484 .vmux = TVP5150_COMPOSITE1, 1485 .amux = EM28XX_AMUX_LINE_IN, 1486 .gpio = hauppauge_wintv_hvr_900_analog, 1487 }, { 1488 .type = EM28XX_VMUX_SVIDEO, 1489 .vmux = TVP5150_SVIDEO, 1490 .amux = EM28XX_AMUX_LINE_IN, 1491 .gpio = hauppauge_wintv_hvr_900_analog, 1492 } }, 1493 }, 1494 [EM2820_BOARD_MSI_VOX_USB_2] = { 1495 .name = "MSI VOX USB 2.0", 1496 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1497 .tda9887_conf = TDA9887_PRESENT | 1498 TDA9887_PORT1_ACTIVE | 1499 TDA9887_PORT2_ACTIVE, 1500 .max_range_640_480 = 1, 1501 .decoder = EM28XX_SAA711X, 1502 .input = { { 1503 .type = EM28XX_VMUX_TELEVISION, 1504 .vmux = SAA7115_COMPOSITE4, 1505 .amux = EM28XX_AMUX_VIDEO, 1506 }, { 1507 .type = EM28XX_VMUX_COMPOSITE, 1508 .vmux = SAA7115_COMPOSITE0, 1509 .amux = EM28XX_AMUX_LINE_IN, 1510 }, { 1511 .type = EM28XX_VMUX_SVIDEO, 1512 .vmux = SAA7115_SVIDEO3, 1513 .amux = EM28XX_AMUX_LINE_IN, 1514 } }, 1515 }, 1516 [EM2800_BOARD_TERRATEC_CINERGY_200] = { 1517 .name = "Terratec Cinergy 200 USB", 1518 .is_em2800 = 1, 1519 .has_ir_i2c = 1, 1520 .tuner_type = TUNER_LG_TALN, 1521 .tda9887_conf = TDA9887_PRESENT, 1522 .decoder = EM28XX_SAA711X, 1523 .input = { { 1524 .type = EM28XX_VMUX_TELEVISION, 1525 .vmux = SAA7115_COMPOSITE2, 1526 .amux = EM28XX_AMUX_VIDEO, 1527 }, { 1528 .type = EM28XX_VMUX_COMPOSITE, 1529 .vmux = SAA7115_COMPOSITE0, 1530 .amux = EM28XX_AMUX_LINE_IN, 1531 }, { 1532 .type = EM28XX_VMUX_SVIDEO, 1533 .vmux = SAA7115_SVIDEO3, 1534 .amux = EM28XX_AMUX_LINE_IN, 1535 } }, 1536 }, 1537 [EM2800_BOARD_GRABBEEX_USB2800] = { 1538 .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder", 1539 .is_em2800 = 1, 1540 .decoder = EM28XX_SAA711X, 1541 .tuner_type = TUNER_ABSENT, /* capture only board */ 1542 .input = { { 1543 .type = EM28XX_VMUX_COMPOSITE, 1544 .vmux = SAA7115_COMPOSITE0, 1545 .amux = EM28XX_AMUX_LINE_IN, 1546 }, { 1547 .type = EM28XX_VMUX_SVIDEO, 1548 .vmux = SAA7115_SVIDEO3, 1549 .amux = EM28XX_AMUX_LINE_IN, 1550 } }, 1551 }, 1552 [EM2800_BOARD_VC211A] = { 1553 .name = "Actionmaster/LinXcel/Digitus VC211A", 1554 .is_em2800 = 1, 1555 .tuner_type = TUNER_ABSENT, /* Capture-only board */ 1556 .decoder = EM28XX_SAA711X, 1557 .input = { { 1558 .type = EM28XX_VMUX_COMPOSITE, 1559 .vmux = SAA7115_COMPOSITE0, 1560 .amux = EM28XX_AMUX_LINE_IN, 1561 .gpio = vc211a_enable, 1562 }, { 1563 .type = EM28XX_VMUX_SVIDEO, 1564 .vmux = SAA7115_SVIDEO3, 1565 .amux = EM28XX_AMUX_LINE_IN, 1566 .gpio = vc211a_enable, 1567 } }, 1568 }, 1569 [EM2800_BOARD_LEADTEK_WINFAST_USBII] = { 1570 .name = "Leadtek Winfast USB II", 1571 .is_em2800 = 1, 1572 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1573 .tda9887_conf = TDA9887_PRESENT, 1574 .decoder = EM28XX_SAA711X, 1575 .input = { { 1576 .type = EM28XX_VMUX_TELEVISION, 1577 .vmux = SAA7115_COMPOSITE2, 1578 .amux = EM28XX_AMUX_VIDEO, 1579 }, { 1580 .type = EM28XX_VMUX_COMPOSITE, 1581 .vmux = SAA7115_COMPOSITE0, 1582 .amux = EM28XX_AMUX_LINE_IN, 1583 }, { 1584 .type = EM28XX_VMUX_SVIDEO, 1585 .vmux = SAA7115_SVIDEO3, 1586 .amux = EM28XX_AMUX_LINE_IN, 1587 } }, 1588 }, 1589 [EM2800_BOARD_KWORLD_USB2800] = { 1590 .name = "Kworld USB2800", 1591 .is_em2800 = 1, 1592 .tuner_type = TUNER_PHILIPS_FCV1236D, 1593 .tda9887_conf = TDA9887_PRESENT, 1594 .decoder = EM28XX_SAA711X, 1595 .input = { { 1596 .type = EM28XX_VMUX_TELEVISION, 1597 .vmux = SAA7115_COMPOSITE2, 1598 .amux = EM28XX_AMUX_VIDEO, 1599 }, { 1600 .type = EM28XX_VMUX_COMPOSITE, 1601 .vmux = SAA7115_COMPOSITE0, 1602 .amux = EM28XX_AMUX_LINE_IN, 1603 }, { 1604 .type = EM28XX_VMUX_SVIDEO, 1605 .vmux = SAA7115_SVIDEO3, 1606 .amux = EM28XX_AMUX_LINE_IN, 1607 } }, 1608 }, 1609 [EM2820_BOARD_PINNACLE_DVC_90] = { 1610 .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U", 1611 .tuner_type = TUNER_ABSENT, /* capture only board */ 1612 .decoder = EM28XX_SAA711X, 1613 .input = { { 1614 .type = EM28XX_VMUX_COMPOSITE, 1615 .vmux = SAA7115_COMPOSITE0, 1616 .amux = EM28XX_AMUX_LINE_IN, 1617 }, { 1618 .type = EM28XX_VMUX_SVIDEO, 1619 .vmux = SAA7115_SVIDEO3, 1620 .amux = EM28XX_AMUX_LINE_IN, 1621 } }, 1622 }, 1623 [EM2800_BOARD_VGEAR_POCKETTV] = { 1624 .name = "V-Gear PocketTV", 1625 .is_em2800 = 1, 1626 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1627 .tda9887_conf = TDA9887_PRESENT, 1628 .decoder = EM28XX_SAA711X, 1629 .input = { { 1630 .type = EM28XX_VMUX_TELEVISION, 1631 .vmux = SAA7115_COMPOSITE2, 1632 .amux = EM28XX_AMUX_VIDEO, 1633 }, { 1634 .type = EM28XX_VMUX_COMPOSITE, 1635 .vmux = SAA7115_COMPOSITE0, 1636 .amux = EM28XX_AMUX_LINE_IN, 1637 }, { 1638 .type = EM28XX_VMUX_SVIDEO, 1639 .vmux = SAA7115_SVIDEO3, 1640 .amux = EM28XX_AMUX_LINE_IN, 1641 } }, 1642 }, 1643 [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = { 1644 .name = "Pixelview PlayTV Box 4 USB 2.0", 1645 .tda9887_conf = TDA9887_PRESENT, 1646 .tuner_type = TUNER_YMEC_TVF_5533MF, 1647 .decoder = EM28XX_SAA711X, 1648 .input = { { 1649 .type = EM28XX_VMUX_TELEVISION, 1650 .vmux = SAA7115_COMPOSITE2, 1651 .amux = EM28XX_AMUX_VIDEO, 1652 .aout = EM28XX_AOUT_MONO | /* I2S */ 1653 EM28XX_AOUT_MASTER, /* Line out pin */ 1654 }, { 1655 .type = EM28XX_VMUX_COMPOSITE, 1656 .vmux = SAA7115_COMPOSITE0, 1657 .amux = EM28XX_AMUX_LINE_IN, 1658 }, { 1659 .type = EM28XX_VMUX_SVIDEO, 1660 .vmux = SAA7115_SVIDEO3, 1661 .amux = EM28XX_AMUX_LINE_IN, 1662 } }, 1663 }, 1664 [EM2820_BOARD_PROLINK_PLAYTV_USB2] = { 1665 .name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0", 1666 .buttons = std_snapshot_button, 1667 .tda9887_conf = TDA9887_PRESENT, 1668 .tuner_type = TUNER_YMEC_TVF_5533MF, 1669 .tuner_addr = 0x60, 1670 .decoder = EM28XX_SAA711X, 1671 .input = { { 1672 .type = EM28XX_VMUX_TELEVISION, 1673 .vmux = SAA7115_COMPOSITE2, 1674 .amux = EM28XX_AMUX_VIDEO, 1675 .aout = EM28XX_AOUT_MONO | /* I2S */ 1676 EM28XX_AOUT_MASTER, /* Line out pin */ 1677 }, { 1678 .type = EM28XX_VMUX_COMPOSITE, 1679 .vmux = SAA7115_COMPOSITE0, 1680 .amux = EM28XX_AMUX_LINE_IN, 1681 }, { 1682 .type = EM28XX_VMUX_SVIDEO, 1683 .vmux = SAA7115_SVIDEO3, 1684 .amux = EM28XX_AMUX_LINE_IN, 1685 } }, 1686 }, 1687 [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = { 1688 .name = "EM2860/SAA711X Reference Design", 1689 .buttons = std_snapshot_button, 1690 .tuner_type = TUNER_ABSENT, 1691 .decoder = EM28XX_SAA711X, 1692 .input = { { 1693 .type = EM28XX_VMUX_SVIDEO, 1694 .vmux = SAA7115_SVIDEO3, 1695 }, { 1696 .type = EM28XX_VMUX_COMPOSITE, 1697 .vmux = SAA7115_COMPOSITE0, 1698 } }, 1699 }, 1700 1701 [EM2874_BOARD_LEADERSHIP_ISDBT] = { 1702 .def_i2c_bus = 1, 1703 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1704 EM28XX_I2C_FREQ_100_KHZ, 1705 .xclk = EM28XX_XCLK_FREQUENCY_10MHZ, 1706 .name = "EM2874 Leadership ISDBT", 1707 .tuner_type = TUNER_ABSENT, 1708 .tuner_gpio = leadership_reset, 1709 .dvb_gpio = leadership_digital, 1710 .has_dvb = 1, 1711 }, 1712 1713 [EM2880_BOARD_MSI_DIGIVOX_AD] = { 1714 .name = "MSI DigiVox A/D", 1715 .valid = EM28XX_BOARD_NOT_VALIDATED, 1716 .tuner_type = TUNER_XC2028, 1717 .tuner_gpio = default_tuner_gpio, 1718 .decoder = EM28XX_TVP5150, 1719 .input = { { 1720 .type = EM28XX_VMUX_TELEVISION, 1721 .vmux = TVP5150_COMPOSITE0, 1722 .amux = EM28XX_AMUX_VIDEO, 1723 .gpio = em2880_msi_digivox_ad_analog, 1724 }, { 1725 .type = EM28XX_VMUX_COMPOSITE, 1726 .vmux = TVP5150_COMPOSITE1, 1727 .amux = EM28XX_AMUX_LINE_IN, 1728 .gpio = em2880_msi_digivox_ad_analog, 1729 }, { 1730 .type = EM28XX_VMUX_SVIDEO, 1731 .vmux = TVP5150_SVIDEO, 1732 .amux = EM28XX_AMUX_LINE_IN, 1733 .gpio = em2880_msi_digivox_ad_analog, 1734 } }, 1735 }, 1736 [EM2880_BOARD_MSI_DIGIVOX_AD_II] = { 1737 .name = "MSI DigiVox A/D II", 1738 .valid = EM28XX_BOARD_NOT_VALIDATED, 1739 .tuner_type = TUNER_XC2028, 1740 .tuner_gpio = default_tuner_gpio, 1741 .decoder = EM28XX_TVP5150, 1742 .input = { { 1743 .type = EM28XX_VMUX_TELEVISION, 1744 .vmux = TVP5150_COMPOSITE0, 1745 .amux = EM28XX_AMUX_VIDEO, 1746 .gpio = em2880_msi_digivox_ad_analog, 1747 }, { 1748 .type = EM28XX_VMUX_COMPOSITE, 1749 .vmux = TVP5150_COMPOSITE1, 1750 .amux = EM28XX_AMUX_LINE_IN, 1751 .gpio = em2880_msi_digivox_ad_analog, 1752 }, { 1753 .type = EM28XX_VMUX_SVIDEO, 1754 .vmux = TVP5150_SVIDEO, 1755 .amux = EM28XX_AMUX_LINE_IN, 1756 .gpio = em2880_msi_digivox_ad_analog, 1757 } }, 1758 }, 1759 [EM2880_BOARD_KWORLD_DVB_305U] = { 1760 .name = "KWorld DVB-T 305U", 1761 .tuner_type = TUNER_XC2028, 1762 .tuner_gpio = default_tuner_gpio, 1763 .decoder = EM28XX_TVP5150, 1764 .input = { { 1765 .type = EM28XX_VMUX_TELEVISION, 1766 .vmux = TVP5150_COMPOSITE0, 1767 .amux = EM28XX_AMUX_VIDEO, 1768 }, { 1769 .type = EM28XX_VMUX_COMPOSITE, 1770 .vmux = TVP5150_COMPOSITE1, 1771 .amux = EM28XX_AMUX_LINE_IN, 1772 }, { 1773 .type = EM28XX_VMUX_SVIDEO, 1774 .vmux = TVP5150_SVIDEO, 1775 .amux = EM28XX_AMUX_LINE_IN, 1776 } }, 1777 }, 1778 [EM2880_BOARD_KWORLD_DVB_310U] = { 1779 .name = "KWorld DVB-T 310U", 1780 .tuner_type = TUNER_XC2028, 1781 .tuner_gpio = default_tuner_gpio, 1782 .has_dvb = 1, 1783 .dvb_gpio = default_digital, 1784 .mts_firmware = 1, 1785 .decoder = EM28XX_TVP5150, 1786 .input = { { 1787 .type = EM28XX_VMUX_TELEVISION, 1788 .vmux = TVP5150_COMPOSITE0, 1789 .amux = EM28XX_AMUX_VIDEO, 1790 .gpio = default_analog, 1791 }, { 1792 .type = EM28XX_VMUX_COMPOSITE, 1793 .vmux = TVP5150_COMPOSITE1, 1794 .amux = EM28XX_AMUX_LINE_IN, 1795 .gpio = default_analog, 1796 }, { /* S-video has not been tested yet */ 1797 .type = EM28XX_VMUX_SVIDEO, 1798 .vmux = TVP5150_SVIDEO, 1799 .amux = EM28XX_AMUX_LINE_IN, 1800 .gpio = default_analog, 1801 } }, 1802 }, 1803 [EM2882_BOARD_KWORLD_ATSC_315U] = { 1804 .name = "KWorld ATSC 315U HDTV TV Box", 1805 .valid = EM28XX_BOARD_NOT_VALIDATED, 1806 .tuner_type = TUNER_THOMSON_DTT761X, 1807 .tuner_gpio = em2882_kworld_315u_tuner_gpio, 1808 .tda9887_conf = TDA9887_PRESENT, 1809 .decoder = EM28XX_SAA711X, 1810 .has_dvb = 1, 1811 .dvb_gpio = em2882_kworld_315u_digital, 1812 .ir_codes = RC_MAP_KWORLD_315U, 1813 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1814 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 1815 #if 0 1816 /* FIXME: Analog mode - still not ready */ 1817 .input = { { 1818 .type = EM28XX_VMUX_TELEVISION, 1819 .vmux = SAA7115_COMPOSITE2, 1820 .amux = EM28XX_AMUX_VIDEO, 1821 .gpio = em2882_kworld_315u_analog, 1822 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1823 }, { 1824 .type = EM28XX_VMUX_COMPOSITE, 1825 .vmux = SAA7115_COMPOSITE0, 1826 .amux = EM28XX_AMUX_LINE_IN, 1827 .gpio = em2882_kworld_315u_analog1, 1828 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1829 }, { 1830 .type = EM28XX_VMUX_SVIDEO, 1831 .vmux = SAA7115_SVIDEO3, 1832 .amux = EM28XX_AMUX_LINE_IN, 1833 .gpio = em2882_kworld_315u_analog1, 1834 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1835 } }, 1836 #endif 1837 }, 1838 [EM2880_BOARD_EMPIRE_DUAL_TV] = { 1839 .name = "Empire dual TV", 1840 .tuner_type = TUNER_XC2028, 1841 .tuner_gpio = default_tuner_gpio, 1842 .has_dvb = 1, 1843 .dvb_gpio = default_digital, 1844 .mts_firmware = 1, 1845 .decoder = EM28XX_TVP5150, 1846 .input = { { 1847 .type = EM28XX_VMUX_TELEVISION, 1848 .vmux = TVP5150_COMPOSITE0, 1849 .amux = EM28XX_AMUX_VIDEO, 1850 .gpio = default_analog, 1851 }, { 1852 .type = EM28XX_VMUX_COMPOSITE, 1853 .vmux = TVP5150_COMPOSITE1, 1854 .amux = EM28XX_AMUX_LINE_IN, 1855 .gpio = default_analog, 1856 }, { 1857 .type = EM28XX_VMUX_SVIDEO, 1858 .vmux = TVP5150_SVIDEO, 1859 .amux = EM28XX_AMUX_LINE_IN, 1860 .gpio = default_analog, 1861 } }, 1862 }, 1863 [EM2881_BOARD_DNT_DA2_HYBRID] = { 1864 .name = "DNT DA2 Hybrid", 1865 .valid = EM28XX_BOARD_NOT_VALIDATED, 1866 .tuner_type = TUNER_XC2028, 1867 .tuner_gpio = default_tuner_gpio, 1868 .decoder = EM28XX_TVP5150, 1869 .input = { { 1870 .type = EM28XX_VMUX_TELEVISION, 1871 .vmux = TVP5150_COMPOSITE0, 1872 .amux = EM28XX_AMUX_VIDEO, 1873 .gpio = default_analog, 1874 }, { 1875 .type = EM28XX_VMUX_COMPOSITE, 1876 .vmux = TVP5150_COMPOSITE1, 1877 .amux = EM28XX_AMUX_LINE_IN, 1878 .gpio = default_analog, 1879 }, { 1880 .type = EM28XX_VMUX_SVIDEO, 1881 .vmux = TVP5150_SVIDEO, 1882 .amux = EM28XX_AMUX_LINE_IN, 1883 .gpio = default_analog, 1884 } }, 1885 }, 1886 [EM2881_BOARD_PINNACLE_HYBRID_PRO] = { 1887 .name = "Pinnacle Hybrid Pro", 1888 .tuner_type = TUNER_XC2028, 1889 .tuner_gpio = default_tuner_gpio, 1890 .decoder = EM28XX_TVP5150, 1891 .has_dvb = 1, 1892 .dvb_gpio = pinnacle_hybrid_pro_digital, 1893 .input = { { 1894 .type = EM28XX_VMUX_TELEVISION, 1895 .vmux = TVP5150_COMPOSITE0, 1896 .amux = EM28XX_AMUX_VIDEO, 1897 .gpio = pinnacle_hybrid_pro_analog, 1898 }, { 1899 .type = EM28XX_VMUX_COMPOSITE, 1900 .vmux = TVP5150_COMPOSITE1, 1901 .amux = EM28XX_AMUX_LINE_IN, 1902 .gpio = pinnacle_hybrid_pro_analog, 1903 }, { 1904 .type = EM28XX_VMUX_SVIDEO, 1905 .vmux = TVP5150_SVIDEO, 1906 .amux = EM28XX_AMUX_LINE_IN, 1907 .gpio = pinnacle_hybrid_pro_analog, 1908 } }, 1909 }, 1910 [EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = { 1911 .name = "Pinnacle Hybrid Pro (330e)", 1912 .tuner_type = TUNER_XC2028, 1913 .tuner_gpio = default_tuner_gpio, 1914 .mts_firmware = 1, 1915 .has_dvb = 1, 1916 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, 1917 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 1918 .decoder = EM28XX_TVP5150, 1919 .input = { { 1920 .type = EM28XX_VMUX_TELEVISION, 1921 .vmux = TVP5150_COMPOSITE0, 1922 .amux = EM28XX_AMUX_VIDEO, 1923 .gpio = hauppauge_wintv_hvr_900_analog, 1924 }, { 1925 .type = EM28XX_VMUX_COMPOSITE, 1926 .vmux = TVP5150_COMPOSITE1, 1927 .amux = EM28XX_AMUX_LINE_IN, 1928 .gpio = hauppauge_wintv_hvr_900_analog, 1929 }, { 1930 .type = EM28XX_VMUX_SVIDEO, 1931 .vmux = TVP5150_SVIDEO, 1932 .amux = EM28XX_AMUX_LINE_IN, 1933 .gpio = hauppauge_wintv_hvr_900_analog, 1934 } }, 1935 }, 1936 [EM2882_BOARD_KWORLD_VS_DVBT] = { 1937 .name = "Kworld VS-DVB-T 323UR", 1938 .tuner_type = TUNER_XC2028, 1939 .tuner_gpio = default_tuner_gpio, 1940 .decoder = EM28XX_TVP5150, 1941 .mts_firmware = 1, 1942 .has_dvb = 1, 1943 .dvb_gpio = kworld_330u_digital, 1944 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 1945 .ir_codes = RC_MAP_KWORLD_315U, 1946 .input = { { 1947 .type = EM28XX_VMUX_TELEVISION, 1948 .vmux = TVP5150_COMPOSITE0, 1949 .amux = EM28XX_AMUX_VIDEO, 1950 }, { 1951 .type = EM28XX_VMUX_COMPOSITE, 1952 .vmux = TVP5150_COMPOSITE1, 1953 .amux = EM28XX_AMUX_LINE_IN, 1954 }, { 1955 .type = EM28XX_VMUX_SVIDEO, 1956 .vmux = TVP5150_SVIDEO, 1957 .amux = EM28XX_AMUX_LINE_IN, 1958 } }, 1959 }, 1960 [EM2882_BOARD_TERRATEC_HYBRID_XS] = { 1961 .name = "Terratec Cinergy Hybrid T USB XS (em2882)", 1962 .tuner_type = TUNER_XC2028, 1963 .tuner_gpio = default_tuner_gpio, 1964 .mts_firmware = 1, 1965 .decoder = EM28XX_TVP5150, 1966 .has_dvb = 1, 1967 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1968 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS, 1969 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1970 .input = { { 1971 .type = EM28XX_VMUX_TELEVISION, 1972 .vmux = TVP5150_COMPOSITE0, 1973 .amux = EM28XX_AMUX_VIDEO, 1974 .gpio = hauppauge_wintv_hvr_900_analog, 1975 }, { 1976 .type = EM28XX_VMUX_COMPOSITE, 1977 .vmux = TVP5150_COMPOSITE1, 1978 .amux = EM28XX_AMUX_LINE_IN, 1979 .gpio = hauppauge_wintv_hvr_900_analog, 1980 }, { 1981 .type = EM28XX_VMUX_SVIDEO, 1982 .vmux = TVP5150_SVIDEO, 1983 .amux = EM28XX_AMUX_LINE_IN, 1984 .gpio = hauppauge_wintv_hvr_900_analog, 1985 } }, 1986 }, 1987 [EM2882_BOARD_DIKOM_DK300] = { 1988 .name = "Dikom DK300", 1989 .tuner_type = TUNER_XC2028, 1990 .tuner_gpio = default_tuner_gpio, 1991 .decoder = EM28XX_TVP5150, 1992 .mts_firmware = 1, 1993 .has_dvb = 1, 1994 .dvb_gpio = dikom_dk300_digital, 1995 .input = { { 1996 .type = EM28XX_VMUX_TELEVISION, 1997 .vmux = TVP5150_COMPOSITE0, 1998 .amux = EM28XX_AMUX_VIDEO, 1999 .gpio = default_analog, 2000 } }, 2001 }, 2002 [EM2883_BOARD_KWORLD_HYBRID_330U] = { 2003 .name = "Kworld PlusTV HD Hybrid 330", 2004 .tuner_type = TUNER_XC2028, 2005 .tuner_gpio = default_tuner_gpio, 2006 .decoder = EM28XX_TVP5150, 2007 .mts_firmware = 1, 2008 .has_dvb = 1, 2009 .dvb_gpio = kworld_330u_digital, 2010 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 2011 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2012 EM28XX_I2C_EEPROM_ON_BOARD | 2013 EM28XX_I2C_EEPROM_KEY_VALID, 2014 .input = { { 2015 .type = EM28XX_VMUX_TELEVISION, 2016 .vmux = TVP5150_COMPOSITE0, 2017 .amux = EM28XX_AMUX_VIDEO, 2018 .gpio = kworld_330u_analog, 2019 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 2020 }, { 2021 .type = EM28XX_VMUX_COMPOSITE, 2022 .vmux = TVP5150_COMPOSITE1, 2023 .amux = EM28XX_AMUX_LINE_IN, 2024 .gpio = kworld_330u_analog, 2025 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 2026 }, { 2027 .type = EM28XX_VMUX_SVIDEO, 2028 .vmux = TVP5150_SVIDEO, 2029 .amux = EM28XX_AMUX_LINE_IN, 2030 .gpio = kworld_330u_analog, 2031 } }, 2032 }, 2033 [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = { 2034 .name = "Compro VideoMate ForYou/Stereo", 2035 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 2036 .tvaudio_addr = 0xb0, 2037 .tda9887_conf = TDA9887_PRESENT, 2038 .decoder = EM28XX_TVP5150, 2039 .adecoder = EM28XX_TVAUDIO, 2040 .mute_gpio = compro_mute_gpio, 2041 .input = { { 2042 .type = EM28XX_VMUX_TELEVISION, 2043 .vmux = TVP5150_COMPOSITE0, 2044 .amux = EM28XX_AMUX_VIDEO, 2045 .gpio = compro_unmute_tv_gpio, 2046 }, { 2047 .type = EM28XX_VMUX_SVIDEO, 2048 .vmux = TVP5150_SVIDEO, 2049 .amux = EM28XX_AMUX_LINE_IN, 2050 .gpio = compro_unmute_svid_gpio, 2051 } }, 2052 }, 2053 [EM2860_BOARD_KAIOMY_TVNPC_U2] = { 2054 .name = "Kaiomy TVnPC U2", 2055 .vchannels = 3, 2056 .tuner_type = TUNER_XC2028, 2057 .tuner_addr = 0x61, 2058 .mts_firmware = 1, 2059 .decoder = EM28XX_TVP5150, 2060 .tuner_gpio = default_tuner_gpio, 2061 .ir_codes = RC_MAP_KAIOMY, 2062 .input = { { 2063 .type = EM28XX_VMUX_TELEVISION, 2064 .vmux = TVP5150_COMPOSITE0, 2065 .amux = EM28XX_AMUX_VIDEO, 2066 2067 }, { 2068 .type = EM28XX_VMUX_COMPOSITE, 2069 .vmux = TVP5150_COMPOSITE1, 2070 .amux = EM28XX_AMUX_LINE_IN, 2071 }, { 2072 .type = EM28XX_VMUX_SVIDEO, 2073 .vmux = TVP5150_SVIDEO, 2074 .amux = EM28XX_AMUX_LINE_IN, 2075 } }, 2076 .radio = { 2077 .type = EM28XX_RADIO, 2078 .amux = EM28XX_AMUX_LINE_IN, 2079 } 2080 }, 2081 [EM2860_BOARD_EASYCAP] = { 2082 .name = "Easy Cap Capture DC-60", 2083 .vchannels = 2, 2084 .tuner_type = TUNER_ABSENT, 2085 .decoder = EM28XX_SAA711X, 2086 .input = { { 2087 .type = EM28XX_VMUX_COMPOSITE, 2088 .vmux = SAA7115_COMPOSITE0, 2089 .amux = EM28XX_AMUX_LINE_IN, 2090 }, { 2091 .type = EM28XX_VMUX_SVIDEO, 2092 .vmux = SAA7115_SVIDEO3, 2093 .amux = EM28XX_AMUX_LINE_IN, 2094 } }, 2095 }, 2096 [EM2820_BOARD_IODATA_GVMVP_SZ] = { 2097 .name = "IO-DATA GV-MVP/SZ", 2098 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 2099 .tuner_gpio = default_tuner_gpio, 2100 .tda9887_conf = TDA9887_PRESENT, 2101 .decoder = EM28XX_TVP5150, 2102 .input = { { 2103 .type = EM28XX_VMUX_TELEVISION, 2104 .vmux = TVP5150_COMPOSITE0, 2105 .amux = EM28XX_AMUX_VIDEO, 2106 }, { /* Composite has not been tested yet */ 2107 .type = EM28XX_VMUX_COMPOSITE, 2108 .vmux = TVP5150_COMPOSITE1, 2109 .amux = EM28XX_AMUX_VIDEO, 2110 }, { /* S-video has not been tested yet */ 2111 .type = EM28XX_VMUX_SVIDEO, 2112 .vmux = TVP5150_SVIDEO, 2113 .amux = EM28XX_AMUX_VIDEO, 2114 } }, 2115 }, 2116 [EM2860_BOARD_TERRATEC_GRABBY] = { 2117 .name = "Terratec Grabby", 2118 .vchannels = 2, 2119 .tuner_type = TUNER_ABSENT, 2120 .decoder = EM28XX_SAA711X, 2121 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 2122 .input = { { 2123 .type = EM28XX_VMUX_COMPOSITE, 2124 .vmux = SAA7115_COMPOSITE0, 2125 .amux = EM28XX_AMUX_LINE_IN, 2126 }, { 2127 .type = EM28XX_VMUX_SVIDEO, 2128 .vmux = SAA7115_SVIDEO3, 2129 .amux = EM28XX_AMUX_LINE_IN, 2130 } }, 2131 .buttons = std_snapshot_button, 2132 .leds = terratec_grabby_leds, 2133 }, 2134 [EM2860_BOARD_TERRATEC_AV350] = { 2135 .name = "Terratec AV350", 2136 .vchannels = 2, 2137 .tuner_type = TUNER_ABSENT, 2138 .decoder = EM28XX_TVP5150, 2139 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 2140 .mute_gpio = terratec_av350_mute_gpio, 2141 .input = { { 2142 .type = EM28XX_VMUX_COMPOSITE, 2143 .vmux = TVP5150_COMPOSITE1, 2144 .amux = EM28XX_AMUX_LINE_IN, 2145 .gpio = terratec_av350_unmute_gpio, 2146 2147 }, { 2148 .type = EM28XX_VMUX_SVIDEO, 2149 .vmux = TVP5150_SVIDEO, 2150 .amux = EM28XX_AMUX_LINE_IN, 2151 .gpio = terratec_av350_unmute_gpio, 2152 } }, 2153 }, 2154 2155 [EM2860_BOARD_ELGATO_VIDEO_CAPTURE] = { 2156 .name = "Elgato Video Capture", 2157 .decoder = EM28XX_SAA711X, 2158 .tuner_type = TUNER_ABSENT, /* Capture only device */ 2159 .input = { { 2160 .type = EM28XX_VMUX_COMPOSITE, 2161 .vmux = SAA7115_COMPOSITE0, 2162 .amux = EM28XX_AMUX_LINE_IN, 2163 }, { 2164 .type = EM28XX_VMUX_SVIDEO, 2165 .vmux = SAA7115_SVIDEO3, 2166 .amux = EM28XX_AMUX_LINE_IN, 2167 } }, 2168 }, 2169 2170 [EM2882_BOARD_EVGA_INDTUBE] = { 2171 .name = "Evga inDtube", 2172 .tuner_type = TUNER_XC2028, 2173 .tuner_gpio = default_tuner_gpio, 2174 .decoder = EM28XX_TVP5150, 2175 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 2176 .mts_firmware = 1, 2177 .has_dvb = 1, 2178 .dvb_gpio = evga_indtube_digital, 2179 .ir_codes = RC_MAP_EVGA_INDTUBE, 2180 .input = { { 2181 .type = EM28XX_VMUX_TELEVISION, 2182 .vmux = TVP5150_COMPOSITE0, 2183 .amux = EM28XX_AMUX_VIDEO, 2184 .gpio = evga_indtube_analog, 2185 }, { 2186 .type = EM28XX_VMUX_COMPOSITE, 2187 .vmux = TVP5150_COMPOSITE1, 2188 .amux = EM28XX_AMUX_LINE_IN, 2189 .gpio = evga_indtube_analog, 2190 }, { 2191 .type = EM28XX_VMUX_SVIDEO, 2192 .vmux = TVP5150_SVIDEO, 2193 .amux = EM28XX_AMUX_LINE_IN, 2194 .gpio = evga_indtube_analog, 2195 } }, 2196 }, 2197 /* 2198 * eb1a:2868 Empia EM2870 + Philips CU1216L NIM 2199 * (Philips TDA10023 + Infineon TUA6034) 2200 */ 2201 [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = { 2202 .name = "Reddo DVB-C USB TV Box", 2203 .tuner_type = TUNER_ABSENT, 2204 .tuner_gpio = reddo_dvb_c_usb_box, 2205 .has_dvb = 1, 2206 }, 2207 /* 2208 * 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold 2209 * initially as the KWorld PlusTV 340U, then as the UB435-Q. 2210 * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 2211 */ 2212 [EM2870_BOARD_KWORLD_A340] = { 2213 .name = "KWorld PlusTV 340U or UB435-Q (ATSC)", 2214 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */ 2215 .has_dvb = 1, 2216 .dvb_gpio = kworld_a340_digital, 2217 .tuner_gpio = default_tuner_gpio, 2218 }, 2219 /* 2220 * 2013:024f PCTV nanoStick T2 290e. 2221 * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 2222 */ 2223 [EM28174_BOARD_PCTV_290E] = { 2224 .name = "PCTV nanoStick T2 290e", 2225 .def_i2c_bus = 1, 2226 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2227 EM28XX_I2C_FREQ_100_KHZ, 2228 .tuner_type = TUNER_ABSENT, 2229 .tuner_gpio = pctv_290e, 2230 .has_dvb = 1, 2231 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2232 }, 2233 /* 2234 * 2013:024f PCTV DVB-S2 Stick 460e 2235 * Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293 2236 */ 2237 [EM28174_BOARD_PCTV_460E] = { 2238 .def_i2c_bus = 1, 2239 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2240 EM28XX_I2C_FREQ_400_KHZ, 2241 .name = "PCTV DVB-S2 Stick (460e)", 2242 .tuner_type = TUNER_ABSENT, 2243 .tuner_gpio = pctv_460e, 2244 .has_dvb = 1, 2245 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2246 }, 2247 /* 2248 * eb1a:5006 Honestech VIDBOX NW03 2249 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner 2250 */ 2251 [EM2860_BOARD_HT_VIDBOX_NW03] = { 2252 .name = "Honestech Vidbox NW03", 2253 .tuner_type = TUNER_ABSENT, 2254 .decoder = EM28XX_SAA711X, 2255 .input = { { 2256 .type = EM28XX_VMUX_COMPOSITE, 2257 .vmux = SAA7115_COMPOSITE0, 2258 .amux = EM28XX_AMUX_LINE_IN, 2259 }, { 2260 .type = EM28XX_VMUX_SVIDEO, 2261 .vmux = SAA7115_SVIDEO3, /* S-VIDEO needs check */ 2262 .amux = EM28XX_AMUX_LINE_IN, 2263 } }, 2264 }, 2265 /* 2266 * 1b80:e425 MaxMedia UB425-TC 2267 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 2268 */ 2269 [EM2874_BOARD_MAXMEDIA_UB425_TC] = { 2270 .name = "MaxMedia UB425-TC", 2271 .tuner_type = TUNER_ABSENT, 2272 .tuner_gpio = maxmedia_ub425_tc, 2273 .has_dvb = 1, 2274 .ir_codes = RC_MAP_REDDO, 2275 .def_i2c_bus = 1, 2276 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2277 EM28XX_I2C_FREQ_400_KHZ, 2278 }, 2279 /* 2280 * 2304:0242 PCTV QuatroStick (510e) 2281 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 2282 */ 2283 [EM2884_BOARD_PCTV_510E] = { 2284 .name = "PCTV QuatroStick (510e)", 2285 .tuner_type = TUNER_ABSENT, 2286 .tuner_gpio = pctv_510e, 2287 .has_dvb = 1, 2288 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2289 .def_i2c_bus = 1, 2290 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2291 EM28XX_I2C_FREQ_400_KHZ, 2292 }, 2293 /* 2294 * 2013:0251 PCTV QuatroStick nano (520e) 2295 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 2296 */ 2297 [EM2884_BOARD_PCTV_520E] = { 2298 .name = "PCTV QuatroStick nano (520e)", 2299 .tuner_type = TUNER_ABSENT, 2300 .tuner_gpio = pctv_520e, 2301 .has_dvb = 1, 2302 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2303 .def_i2c_bus = 1, 2304 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2305 EM28XX_I2C_FREQ_400_KHZ, 2306 }, 2307 [EM2884_BOARD_TERRATEC_HTC_USB_XS] = { 2308 .name = "Terratec Cinergy HTC USB XS", 2309 .has_dvb = 1, 2310 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, 2311 .tuner_type = TUNER_ABSENT, 2312 .def_i2c_bus = 1, 2313 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2314 EM28XX_I2C_FREQ_400_KHZ, 2315 }, 2316 /* 2317 * 1b80:e1cc Delock 61959 2318 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 2319 * mostly the same as MaxMedia UB-425-TC but different remote 2320 */ 2321 [EM2874_BOARD_DELOCK_61959] = { 2322 .name = "Delock 61959", 2323 .tuner_type = TUNER_ABSENT, 2324 .tuner_gpio = maxmedia_ub425_tc, 2325 .has_dvb = 1, 2326 .ir_codes = RC_MAP_DELOCK_61959, 2327 .def_i2c_bus = 1, 2328 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2329 EM28XX_I2C_FREQ_400_KHZ, 2330 }, 2331 /* 2332 * 1b80:e346 KWorld USB ATSC TV Stick UB435-Q V2 2333 * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2 2334 */ 2335 [EM2874_BOARD_KWORLD_UB435Q_V2] = { 2336 .name = "KWorld USB ATSC TV Stick UB435-Q V2", 2337 .tuner_type = TUNER_ABSENT, 2338 .has_dvb = 1, 2339 .dvb_gpio = kworld_a340_digital, 2340 .tuner_gpio = default_tuner_gpio, 2341 .def_i2c_bus = 1, 2342 }, 2343 /* 2344 * 1b80:e34c KWorld USB ATSC TV Stick UB435-Q V3 2345 * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2 2346 */ 2347 [EM2874_BOARD_KWORLD_UB435Q_V3] = { 2348 .name = "KWorld USB ATSC TV Stick UB435-Q V3", 2349 .tuner_type = TUNER_ABSENT, 2350 .has_dvb = 1, 2351 .tuner_gpio = kworld_ub435q_v3_digital, 2352 .def_i2c_bus = 1, 2353 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2354 EM28XX_I2C_FREQ_100_KHZ, 2355 .leds = kworld_ub435q_v3_leds, 2356 }, 2357 [EM2874_BOARD_PCTV_HD_MINI_80E] = { 2358 .name = "Pinnacle PCTV HD Mini", 2359 .tuner_type = TUNER_ABSENT, 2360 .has_dvb = 1, 2361 .dvb_gpio = em2874_pctv_80e_digital, 2362 .decoder = EM28XX_NODECODER, 2363 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2364 .leds = pctv_80e_leds, 2365 }, 2366 /* 2367 * 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam 2368 * Empia EM2765 + OmniVision OV2640 2369 */ 2370 [EM2765_BOARD_SPEEDLINK_VAD_LAPLACE] = { 2371 .name = "SpeedLink Vicious And Devine Laplace webcam", 2372 .xclk = EM28XX_XCLK_FREQUENCY_24MHZ, 2373 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2374 EM28XX_I2C_FREQ_100_KHZ, 2375 .def_i2c_bus = 1, 2376 .tuner_type = TUNER_ABSENT, 2377 .is_webcam = 1, 2378 .input = { { 2379 .type = EM28XX_VMUX_COMPOSITE, 2380 .amux = EM28XX_AMUX_VIDEO, 2381 .gpio = speedlink_vad_laplace_reg_seq, 2382 } }, 2383 .buttons = speedlink_vad_laplace_buttons, 2384 .leds = speedlink_vad_laplace_leds, 2385 }, 2386 /* 2387 * 2013:0258 PCTV DVB-S2 Stick (461e) 2388 * Empia EM28178, Montage M88DS3103, Montage M88TS2022, Allegro A8293 2389 */ 2390 [EM28178_BOARD_PCTV_461E] = { 2391 .def_i2c_bus = 1, 2392 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2393 EM28XX_I2C_FREQ_400_KHZ, 2394 .name = "PCTV DVB-S2 Stick (461e)", 2395 .tuner_type = TUNER_ABSENT, 2396 .tuner_gpio = pctv_461e, 2397 .has_dvb = 1, 2398 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2399 }, 2400 /* 2401 * 2013:025f PCTV tripleStick (292e). 2402 * Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2157 2403 */ 2404 [EM28178_BOARD_PCTV_292E] = { 2405 .name = "PCTV tripleStick (292e)", 2406 .def_i2c_bus = 1, 2407 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2408 EM28XX_I2C_FREQ_400_KHZ, 2409 .tuner_type = TUNER_ABSENT, 2410 .tuner_gpio = pctv_292e, 2411 .has_dvb = 1, 2412 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2413 }, 2414 [EM2861_BOARD_LEADTEK_VC100] = { 2415 .name = "Leadtek VC100", 2416 .tuner_type = TUNER_ABSENT, /* Capture only device */ 2417 .decoder = EM28XX_TVP5150, 2418 .input = { { 2419 .type = EM28XX_VMUX_COMPOSITE, 2420 .vmux = TVP5150_COMPOSITE1, 2421 .amux = EM28XX_AMUX_LINE_IN, 2422 }, { 2423 .type = EM28XX_VMUX_SVIDEO, 2424 .vmux = TVP5150_SVIDEO, 2425 .amux = EM28XX_AMUX_LINE_IN, 2426 } }, 2427 }, 2428 /* 2429 * eb1a:8179 Terratec Cinergy T2 Stick HD. 2430 * Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2146 2431 */ 2432 [EM28178_BOARD_TERRATEC_T2_STICK_HD] = { 2433 .name = "Terratec Cinergy T2 Stick HD", 2434 .def_i2c_bus = 1, 2435 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2436 EM28XX_I2C_FREQ_400_KHZ, 2437 .tuner_type = TUNER_ABSENT, 2438 .tuner_gpio = terratec_t2_stick_hd, 2439 .has_dvb = 1, 2440 .ir_codes = RC_MAP_TERRATEC_SLIM_2, 2441 }, 2442 2443 /* 2444 * 3275:0085 PLEX PX-BCUD. 2445 * Empia EM28178, TOSHIBA TC90532XBG, Sharp QM1D1C0042 2446 */ 2447 [EM28178_BOARD_PLEX_PX_BCUD] = { 2448 .name = "PLEX PX-BCUD", 2449 .xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ, 2450 .def_i2c_bus = 1, 2451 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 2452 .tuner_type = TUNER_ABSENT, 2453 .tuner_gpio = plex_px_bcud, 2454 .has_dvb = 1, 2455 }, 2456 /* 2457 * 2040:0265 Hauppauge WinTV-dualHD (DVB version) Isoc. 2458 * 2040:8265 Hauppauge WinTV-dualHD (DVB version) Bulk. 2459 * Empia EM28274, 2x Silicon Labs Si2168, 2x Silicon Labs Si2157 2460 */ 2461 [EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB] = { 2462 .name = "Hauppauge WinTV-dualHD DVB", 2463 .def_i2c_bus = 1, 2464 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2465 EM28XX_I2C_FREQ_400_KHZ, 2466 .tuner_type = TUNER_ABSENT, 2467 .tuner_gpio = hauppauge_dualhd_dvb, 2468 .has_dvb = 1, 2469 .has_dual_ts = 1, 2470 .ir_codes = RC_MAP_HAUPPAUGE, 2471 .leds = hauppauge_dualhd_leds, 2472 }, 2473 /* 2474 * 2040:026d Hauppauge WinTV-dualHD (model 01595 - ATSC/QAM) Isoc. 2475 * 2040:826d Hauppauge WinTV-dualHD (model 01595 - ATSC/QAM) Bulk. 2476 * Empia EM28274, 2x LG LGDT3306A, 2x Silicon Labs Si2157 2477 */ 2478 [EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595] = { 2479 .name = "Hauppauge WinTV-dualHD 01595 ATSC/QAM", 2480 .def_i2c_bus = 1, 2481 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2482 EM28XX_I2C_FREQ_400_KHZ, 2483 .tuner_type = TUNER_ABSENT, 2484 .tuner_gpio = hauppauge_dualhd_dvb, 2485 .has_dvb = 1, 2486 .has_dual_ts = 1, 2487 .ir_codes = RC_MAP_HAUPPAUGE, 2488 .leds = hauppauge_dualhd_leds, 2489 }, 2490 /* 2491 * 1b80:e349 Magix USB Videowandler-2 2492 * (same chips as Honestech VIDBOX NW03) 2493 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner 2494 */ 2495 [EM2861_BOARD_MAGIX_VIDEOWANDLER2] = { 2496 .name = "Magix USB Videowandler-2", 2497 .tuner_type = TUNER_ABSENT, 2498 .decoder = EM28XX_SAA711X, 2499 .input = { { 2500 .type = EM28XX_VMUX_COMPOSITE, 2501 .vmux = SAA7115_COMPOSITE0, 2502 .amux = EM28XX_AMUX_LINE_IN, 2503 }, { 2504 .type = EM28XX_VMUX_SVIDEO, 2505 .amux = EM28XX_AMUX_LINE_IN, 2506 } }, 2507 }, 2508 }; 2509 EXPORT_SYMBOL_GPL(em28xx_boards); 2510 2511 static const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); 2512 2513 /* table of devices that work with this driver */ 2514 struct usb_device_id em28xx_id_table[] = { 2515 { USB_DEVICE(0xeb1a, 0x2750), 2516 .driver_info = EM2750_BOARD_UNKNOWN }, 2517 { USB_DEVICE(0xeb1a, 0x2751), 2518 .driver_info = EM2750_BOARD_UNKNOWN }, 2519 { USB_DEVICE(0xeb1a, 0x2800), 2520 .driver_info = EM2800_BOARD_UNKNOWN }, 2521 { USB_DEVICE(0xeb1a, 0x2710), 2522 .driver_info = EM2820_BOARD_UNKNOWN }, 2523 { USB_DEVICE(0xeb1a, 0x2820), 2524 .driver_info = EM2820_BOARD_UNKNOWN }, 2525 { USB_DEVICE(0xeb1a, 0x2821), 2526 .driver_info = EM2820_BOARD_UNKNOWN }, 2527 { USB_DEVICE(0xeb1a, 0x2860), 2528 .driver_info = EM2820_BOARD_UNKNOWN }, 2529 { USB_DEVICE(0xeb1a, 0x2861), 2530 .driver_info = EM2820_BOARD_UNKNOWN }, 2531 { USB_DEVICE(0xeb1a, 0x2862), 2532 .driver_info = EM2820_BOARD_UNKNOWN }, 2533 { USB_DEVICE(0xeb1a, 0x2863), 2534 .driver_info = EM2820_BOARD_UNKNOWN }, 2535 { USB_DEVICE(0xeb1a, 0x2870), 2536 .driver_info = EM2820_BOARD_UNKNOWN }, 2537 { USB_DEVICE(0xeb1a, 0x2881), 2538 .driver_info = EM2820_BOARD_UNKNOWN }, 2539 { USB_DEVICE(0xeb1a, 0x2883), /* used by :Zolid Hybrid Tv Stick */ 2540 .driver_info = EM2820_BOARD_UNKNOWN }, 2541 { USB_DEVICE(0xeb1a, 0x2868), 2542 .driver_info = EM2820_BOARD_UNKNOWN }, 2543 { USB_DEVICE(0xeb1a, 0x2875), 2544 .driver_info = EM2820_BOARD_UNKNOWN }, 2545 { USB_DEVICE(0xeb1a, 0x2885), /* MSI Digivox Trio */ 2546 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2547 { USB_DEVICE(0xeb1a, 0xe300), 2548 .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U }, 2549 { USB_DEVICE(0xeb1a, 0xe303), 2550 .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 }, 2551 { USB_DEVICE(0xeb1a, 0xe305), 2552 .driver_info = EM2880_BOARD_KWORLD_DVB_305U }, 2553 { USB_DEVICE(0xeb1a, 0xe310), 2554 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD }, 2555 { USB_DEVICE(0xeb1a, 0xa313), 2556 .driver_info = EM2882_BOARD_KWORLD_ATSC_315U }, 2557 { USB_DEVICE(0xeb1a, 0xa316), 2558 .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U }, 2559 { USB_DEVICE(0xeb1a, 0xe320), 2560 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II }, 2561 { USB_DEVICE(0xeb1a, 0xe323), 2562 .driver_info = EM2882_BOARD_KWORLD_VS_DVBT }, 2563 { USB_DEVICE(0xeb1a, 0xe350), 2564 .driver_info = EM2870_BOARD_KWORLD_350U }, 2565 { USB_DEVICE(0xeb1a, 0xe355), 2566 .driver_info = EM2870_BOARD_KWORLD_355U }, 2567 { USB_DEVICE(0xeb1a, 0x2801), 2568 .driver_info = EM2800_BOARD_GRABBEEX_USB2800 }, 2569 { USB_DEVICE(0xeb1a, 0xe357), 2570 .driver_info = EM2870_BOARD_KWORLD_355U }, 2571 { USB_DEVICE(0xeb1a, 0xe359), 2572 .driver_info = EM2870_BOARD_KWORLD_355U }, 2573 { USB_DEVICE(0x1b80, 0xe302), /* Kaiser Baas Video to DVD maker */ 2574 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2575 { USB_DEVICE(0x1b80, 0xe304), /* Kworld DVD Maker 2 */ 2576 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2577 { USB_DEVICE(0x0ccd, 0x0036), 2578 .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 }, 2579 { USB_DEVICE(0x0ccd, 0x004c), 2580 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR }, 2581 { USB_DEVICE(0x0ccd, 0x004f), 2582 .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS }, 2583 { USB_DEVICE(0x0ccd, 0x005e), 2584 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, 2585 { USB_DEVICE(0x0ccd, 0x0042), 2586 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, 2587 { USB_DEVICE(0x0ccd, 0x0043), 2588 .driver_info = EM2870_BOARD_TERRATEC_XS_MT2060 }, 2589 { USB_DEVICE(0x0ccd, 0x008e), /* Cinergy HTC USB XS Rev. 1 */ 2590 .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS }, 2591 { USB_DEVICE(0x0ccd, 0x00ac), /* Cinergy HTC USB XS Rev. 2 */ 2592 .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS }, 2593 { USB_DEVICE(0x0ccd, 0x10a2), /* H5 Rev. 1 */ 2594 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2595 { USB_DEVICE(0x0ccd, 0x10ad), /* H5 Rev. 2 */ 2596 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2597 { USB_DEVICE(0x0ccd, 0x10b6), /* H5 Rev. 3 */ 2598 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2599 { USB_DEVICE(0x0ccd, 0x10b2), /* H6 */ 2600 .driver_info = EM2884_BOARD_TERRATEC_H6 }, 2601 { USB_DEVICE(0x0ccd, 0x0084), 2602 .driver_info = EM2860_BOARD_TERRATEC_AV350 }, 2603 { USB_DEVICE(0x0ccd, 0x0096), 2604 .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, 2605 { USB_DEVICE(0x0ccd, 0x10AF), 2606 .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, 2607 { USB_DEVICE(0x0ccd, 0x00b2), 2608 .driver_info = EM2884_BOARD_CINERGY_HTC_STICK }, 2609 { USB_DEVICE(0x0fd9, 0x0018), 2610 .driver_info = EM2884_BOARD_ELGATO_EYETV_HYBRID_2008 }, 2611 { USB_DEVICE(0x0fd9, 0x0033), 2612 .driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE }, 2613 { USB_DEVICE(0x185b, 0x2870), 2614 .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE }, 2615 { USB_DEVICE(0x185b, 0x2041), 2616 .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU }, 2617 { USB_DEVICE(0x2040, 0x4200), 2618 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, 2619 { USB_DEVICE(0x2040, 0x4201), 2620 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, 2621 { USB_DEVICE(0x2040, 0x6500), 2622 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 }, 2623 { USB_DEVICE(0x2040, 0x6502), 2624 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 }, 2625 { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */ 2626 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2627 { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */ 2628 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2629 { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */ 2630 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2631 { USB_DEVICE(0x2040, 0x651f), 2632 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 }, 2633 { USB_DEVICE(0x2040, 0x0265), 2634 .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB }, 2635 { USB_DEVICE(0x2040, 0x8265), 2636 .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB }, 2637 { USB_DEVICE(0x2040, 0x026d), 2638 .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595 }, 2639 { USB_DEVICE(0x2040, 0x826d), 2640 .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595 }, 2641 { USB_DEVICE(0x0438, 0xb002), 2642 .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 }, 2643 { USB_DEVICE(0x2001, 0xf112), 2644 .driver_info = EM2820_BOARD_DLINK_USB_TV }, 2645 { USB_DEVICE(0x2304, 0x0207), 2646 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2647 { USB_DEVICE(0x2304, 0x0208), 2648 .driver_info = EM2820_BOARD_PINNACLE_USB_2 }, 2649 { USB_DEVICE(0x2304, 0x021a), 2650 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2651 { USB_DEVICE(0x2304, 0x0226), 2652 .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E }, 2653 { USB_DEVICE(0x2304, 0x0227), 2654 .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO }, 2655 { USB_DEVICE(0x2304, 0x023f), 2656 .driver_info = EM2874_BOARD_PCTV_HD_MINI_80E }, 2657 { USB_DEVICE(0x0413, 0x6023), 2658 .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII }, 2659 { USB_DEVICE(0x093b, 0xa003), 2660 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2661 { USB_DEVICE(0x093b, 0xa005), 2662 .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U }, 2663 { USB_DEVICE(0x04bb, 0x0515), 2664 .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ }, 2665 { USB_DEVICE(0xeb1a, 0x50a6), 2666 .driver_info = EM2860_BOARD_GADMEI_UTV330 }, 2667 { USB_DEVICE(0x1b80, 0xa340), 2668 .driver_info = EM2870_BOARD_KWORLD_A340 }, 2669 { USB_DEVICE(0x1b80, 0xe346), 2670 .driver_info = EM2874_BOARD_KWORLD_UB435Q_V2 }, 2671 { USB_DEVICE(0x1b80, 0xe34c), 2672 .driver_info = EM2874_BOARD_KWORLD_UB435Q_V3 }, 2673 { USB_DEVICE(0x2013, 0x024f), 2674 .driver_info = EM28174_BOARD_PCTV_290E }, 2675 { USB_DEVICE(0x2013, 0x024c), 2676 .driver_info = EM28174_BOARD_PCTV_460E }, 2677 { USB_DEVICE(0x2040, 0x1605), 2678 .driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C }, 2679 { USB_DEVICE(0x1b80, 0xe755), 2680 .driver_info = EM2884_BOARD_C3TECH_DIGITAL_DUO }, 2681 { USB_DEVICE(0xeb1a, 0x5006), 2682 .driver_info = EM2860_BOARD_HT_VIDBOX_NW03 }, 2683 { USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */ 2684 .driver_info = EM2860_BOARD_EASYCAP }, 2685 { USB_DEVICE(0x1b80, 0xe425), 2686 .driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC }, 2687 { USB_DEVICE(0x2304, 0x0242), 2688 .driver_info = EM2884_BOARD_PCTV_510E }, 2689 { USB_DEVICE(0x2013, 0x0251), 2690 .driver_info = EM2884_BOARD_PCTV_520E }, 2691 { USB_DEVICE(0x1b80, 0xe1cc), 2692 .driver_info = EM2874_BOARD_DELOCK_61959 }, 2693 { USB_DEVICE(0x1ae7, 0x9003), 2694 .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE }, 2695 { USB_DEVICE(0x1ae7, 0x9004), 2696 .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE }, 2697 { USB_DEVICE(0x2013, 0x0258), 2698 .driver_info = EM28178_BOARD_PCTV_461E }, 2699 { USB_DEVICE(0x2013, 0x025f), 2700 .driver_info = EM28178_BOARD_PCTV_292E }, 2701 { USB_DEVICE(0x2013, 0x0264), /* Hauppauge WinTV-soloHD 292e SE */ 2702 .driver_info = EM28178_BOARD_PCTV_292E }, 2703 { USB_DEVICE(0x2040, 0x0264), /* Hauppauge WinTV-soloHD Isoc */ 2704 .driver_info = EM28178_BOARD_PCTV_292E }, 2705 { USB_DEVICE(0x2040, 0x8264), /* Hauppauge OEM Generic WinTV-soloHD Bulk */ 2706 .driver_info = EM28178_BOARD_PCTV_292E }, 2707 { USB_DEVICE(0x2040, 0x8268), /* Hauppauge Retail WinTV-soloHD Bulk */ 2708 .driver_info = EM28178_BOARD_PCTV_292E }, 2709 { USB_DEVICE(0x0413, 0x6f07), 2710 .driver_info = EM2861_BOARD_LEADTEK_VC100 }, 2711 { USB_DEVICE(0xeb1a, 0x8179), 2712 .driver_info = EM28178_BOARD_TERRATEC_T2_STICK_HD }, 2713 { USB_DEVICE(0x3275, 0x0085), 2714 .driver_info = EM28178_BOARD_PLEX_PX_BCUD }, 2715 { USB_DEVICE(0xeb1a, 0x5051), /* Ion Video 2 PC MKII / Startech svid2usb23 / Raygo R12-41373 */ 2716 .driver_info = EM2860_BOARD_TVP5150_REFERENCE_DESIGN }, 2717 { USB_DEVICE(0x1b80, 0xe349), /* Magix USB Videowandler-2 */ 2718 .driver_info = EM2861_BOARD_MAGIX_VIDEOWANDLER2 }, 2719 { }, 2720 }; 2721 MODULE_DEVICE_TABLE(usb, em28xx_id_table); 2722 2723 /* 2724 * EEPROM hash table for devices with generic USB IDs 2725 */ 2726 static const struct em28xx_hash_table em28xx_eeprom_hash[] = { 2727 /* P/N: SA 60002070465 Tuner: TVF7533-MF */ 2728 {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF}, 2729 {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF}, 2730 {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028}, 2731 {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028}, 2732 {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028}, 2733 {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028}, 2734 {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT}, 2735 {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028}, 2736 {0x85dd871e, EM2882_BOARD_ZOLID_HYBRID_TV_STICK, TUNER_XC2028}, 2737 }; 2738 2739 /* I2C devicelist hash table for devices with generic USB IDs */ 2740 static const struct em28xx_hash_table em28xx_i2c_hash[] = { 2741 {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC}, 2742 {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC}, 2743 {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT}, 2744 {0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT}, 2745 {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC}, 2746 {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF}, 2747 {0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT}, 2748 {0x27e10080, EM2882_BOARD_ZOLID_HYBRID_TV_STICK, TUNER_XC2028}, 2749 }; 2750 2751 /* NOTE: introduce a separate hash table for devices with 16 bit eeproms */ 2752 2753 int em28xx_tuner_callback(void *ptr, int component, int command, int arg) 2754 { 2755 struct em28xx_i2c_bus *i2c_bus = ptr; 2756 struct em28xx *dev = i2c_bus->dev; 2757 int rc = 0; 2758 2759 if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000) 2760 return 0; 2761 2762 if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET) 2763 return 0; 2764 2765 rc = em28xx_gpio_set(dev, dev->board.tuner_gpio); 2766 2767 return rc; 2768 } 2769 EXPORT_SYMBOL_GPL(em28xx_tuner_callback); 2770 2771 static inline void em28xx_set_xclk_i2c_speed(struct em28xx *dev) 2772 { 2773 const struct em28xx_board *board = &em28xx_boards[dev->model]; 2774 u8 xclk = board->xclk, i2c_speed = board->i2c_speed; 2775 2776 /* 2777 * Those are the default values for the majority of boards 2778 * Use those values if not specified otherwise at boards entry 2779 */ 2780 if (!xclk) 2781 xclk = EM28XX_XCLK_IR_RC5_MODE | 2782 EM28XX_XCLK_FREQUENCY_12MHZ; 2783 2784 em28xx_write_reg(dev, EM28XX_R0F_XCLK, xclk); 2785 2786 if (!i2c_speed) 2787 i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2788 EM28XX_I2C_FREQ_100_KHZ; 2789 2790 dev->i2c_speed = i2c_speed & 0x03; 2791 2792 if (!dev->board.is_em2800) 2793 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, i2c_speed); 2794 msleep(50); 2795 } 2796 2797 static inline void em28xx_set_model(struct em28xx *dev) 2798 { 2799 dev->board = em28xx_boards[dev->model]; 2800 dev->has_msp34xx = dev->board.has_msp34xx; 2801 dev->is_webcam = dev->board.is_webcam; 2802 2803 em28xx_set_xclk_i2c_speed(dev); 2804 2805 /* Should be initialized early, for I2C to work */ 2806 dev->def_i2c_bus = dev->board.def_i2c_bus; 2807 } 2808 2809 /* 2810 * Wait until AC97_RESET reports the expected value reliably before proceeding. 2811 * We also check that two unrelated registers accesses don't return the same 2812 * value to avoid premature return. 2813 * This procedure helps ensuring AC97 register accesses are reliable. 2814 */ 2815 static int em28xx_wait_until_ac97_features_equals(struct em28xx *dev, 2816 int expected_feat) 2817 { 2818 unsigned long timeout = jiffies + msecs_to_jiffies(2000); 2819 int feat, powerdown; 2820 2821 while (time_is_after_jiffies(timeout)) { 2822 feat = em28xx_read_ac97(dev, AC97_RESET); 2823 if (feat < 0) 2824 return feat; 2825 2826 powerdown = em28xx_read_ac97(dev, AC97_POWERDOWN); 2827 if (powerdown < 0) 2828 return powerdown; 2829 2830 if (feat == expected_feat && feat != powerdown) 2831 return 0; 2832 2833 msleep(50); 2834 } 2835 2836 dev_warn(&dev->intf->dev, "AC97 registers access is not reliable !\n"); 2837 return -ETIMEDOUT; 2838 } 2839 2840 /* 2841 * Since em28xx_pre_card_setup() requires a proper dev->model, 2842 * this won't work for boards with generic PCI IDs 2843 */ 2844 static void em28xx_pre_card_setup(struct em28xx *dev) 2845 { 2846 /* 2847 * Set the initial XCLK and I2C clock values based on the board 2848 * definition 2849 */ 2850 em28xx_set_xclk_i2c_speed(dev); 2851 2852 /* request some modules */ 2853 switch (dev->model) { 2854 case EM2861_BOARD_PLEXTOR_PX_TV100U: 2855 /* Sets the msp34xx I2S speed */ 2856 dev->i2s_speed = 2048000; 2857 break; 2858 case EM2861_BOARD_KWORLD_PVRTV_300U: 2859 case EM2880_BOARD_KWORLD_DVB_305U: 2860 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x6d); 2861 usleep_range(10000, 11000); 2862 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x7d); 2863 usleep_range(10000, 11000); 2864 break; 2865 case EM2870_BOARD_COMPRO_VIDEOMATE: 2866 /* 2867 * TODO: someone can do some cleanup here... 2868 * not everything's needed 2869 */ 2870 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); 2871 usleep_range(10000, 11000); 2872 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01); 2873 usleep_range(10000, 11000); 2874 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 2875 msleep(70); 2876 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc); 2877 msleep(70); 2878 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xdc); 2879 msleep(70); 2880 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc); 2881 msleep(70); 2882 break; 2883 case EM2870_BOARD_TERRATEC_XS_MT2060: 2884 /* 2885 * this device needs some gpio writes to get the DVB-T 2886 * demod work 2887 */ 2888 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2889 msleep(70); 2890 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde); 2891 msleep(70); 2892 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2893 msleep(70); 2894 break; 2895 case EM2870_BOARD_PINNACLE_PCTV_DVB: 2896 /* 2897 * this device needs some gpio writes to get the 2898 * DVB-T demod work 2899 */ 2900 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2901 msleep(70); 2902 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde); 2903 msleep(70); 2904 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2905 msleep(70); 2906 break; 2907 case EM2820_BOARD_GADMEI_UTV310: 2908 case EM2820_BOARD_MSI_VOX_USB_2: 2909 /* enables audio for that devices */ 2910 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 2911 break; 2912 2913 case EM2882_BOARD_KWORLD_ATSC_315U: 2914 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); 2915 usleep_range(10000, 11000); 2916 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2917 usleep_range(10000, 11000); 2918 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); 2919 usleep_range(10000, 11000); 2920 em28xx_write_reg(dev, EM2880_R04_GPO, 0x08); 2921 usleep_range(10000, 11000); 2922 break; 2923 2924 case EM2860_BOARD_KAIOMY_TVNPC_U2: 2925 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1); 2926 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1); 2927 em28xx_write_regs(dev, 0x0d, "\x42", 1); 2928 em28xx_write_regs(dev, 0x08, "\xfd", 1); 2929 usleep_range(10000, 11000); 2930 em28xx_write_regs(dev, 0x08, "\xff", 1); 2931 usleep_range(10000, 11000); 2932 em28xx_write_regs(dev, 0x08, "\x7f", 1); 2933 usleep_range(10000, 11000); 2934 em28xx_write_regs(dev, 0x08, "\x6b", 1); 2935 2936 break; 2937 case EM2860_BOARD_EASYCAP: 2938 em28xx_write_regs(dev, 0x08, "\xf8", 1); 2939 break; 2940 2941 case EM2820_BOARD_IODATA_GVMVP_SZ: 2942 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); 2943 msleep(70); 2944 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7); 2945 usleep_range(10000, 11000); 2946 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2947 msleep(70); 2948 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 2949 msleep(70); 2950 break; 2951 2952 case EM2860_BOARD_TERRATEC_GRABBY: 2953 /* 2954 * HACK?: Ensure AC97 register reading is reliable before 2955 * proceeding. In practice, this will wait about 1.6 seconds. 2956 */ 2957 em28xx_wait_until_ac97_features_equals(dev, 0x6a90); 2958 break; 2959 } 2960 2961 em28xx_gpio_set(dev, dev->board.tuner_gpio); 2962 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 2963 2964 /* Unlock device */ 2965 em28xx_set_mode(dev, EM28XX_SUSPEND); 2966 } 2967 2968 static int em28xx_hint_board(struct em28xx *dev) 2969 { 2970 int i; 2971 2972 if (dev->is_webcam) { 2973 if (dev->em28xx_sensor == EM28XX_MT9V011) { 2974 dev->model = EM2820_BOARD_SILVERCREST_WEBCAM; 2975 } else if (dev->em28xx_sensor == EM28XX_MT9M001 || 2976 dev->em28xx_sensor == EM28XX_MT9M111) { 2977 dev->model = EM2750_BOARD_UNKNOWN; 2978 } 2979 /* FIXME: IMPROVE ! */ 2980 2981 return 0; 2982 } 2983 2984 /* 2985 * HINT method: EEPROM 2986 * 2987 * This method works only for boards with eeprom. 2988 * Uses a hash of all eeprom bytes. The hash should be 2989 * unique for a vendor/tuner pair. 2990 * There are a high chance that tuners for different 2991 * video standards produce different hashes. 2992 */ 2993 for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) { 2994 if (dev->hash == em28xx_eeprom_hash[i].hash) { 2995 dev->model = em28xx_eeprom_hash[i].model; 2996 dev->tuner_type = em28xx_eeprom_hash[i].tuner; 2997 2998 dev_err(&dev->intf->dev, 2999 "Your board has no unique USB ID.\n" 3000 "A hint were successfully done, based on eeprom hash.\n" 3001 "This method is not 100%% failproof.\n" 3002 "If the board were misdetected, please email this log to:\n" 3003 "\tV4L Mailing List <linux-media@vger.kernel.org>\n" 3004 "Board detected as %s\n", 3005 em28xx_boards[dev->model].name); 3006 3007 return 0; 3008 } 3009 } 3010 3011 /* 3012 * HINT method: I2C attached devices 3013 * 3014 * This method works for all boards. 3015 * Uses a hash of i2c scanned devices. 3016 * Devices with the same i2c attached chips will 3017 * be considered equal. 3018 * This method is less precise than the eeprom one. 3019 */ 3020 3021 /* user did not request i2c scanning => do it now */ 3022 if (!dev->i2c_hash) 3023 em28xx_do_i2c_scan(dev, dev->def_i2c_bus); 3024 3025 for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) { 3026 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) { 3027 dev->model = em28xx_i2c_hash[i].model; 3028 dev->tuner_type = em28xx_i2c_hash[i].tuner; 3029 dev_err(&dev->intf->dev, 3030 "Your board has no unique USB ID.\n" 3031 "A hint were successfully done, based on i2c devicelist hash.\n" 3032 "This method is not 100%% failproof.\n" 3033 "If the board were misdetected, please email this log to:\n" 3034 "\tV4L Mailing List <linux-media@vger.kernel.org>\n" 3035 "Board detected as %s\n", 3036 em28xx_boards[dev->model].name); 3037 3038 return 0; 3039 } 3040 } 3041 3042 dev_err(&dev->intf->dev, 3043 "Your board has no unique USB ID and thus need a hint to be detected.\n" 3044 "You may try to use card=<n> insmod option to workaround that.\n" 3045 "Please send an email with this log to:\n" 3046 "\tV4L Mailing List <linux-media@vger.kernel.org>\n" 3047 "Board eeprom hash is 0x%08lx\n" 3048 "Board i2c devicelist hash is 0x%08lx\n", 3049 dev->hash, dev->i2c_hash); 3050 3051 dev_err(&dev->intf->dev, 3052 "Here is a list of valid choices for the card=<n> insmod option:\n"); 3053 for (i = 0; i < em28xx_bcount; i++) { 3054 dev_err(&dev->intf->dev, 3055 " card=%d -> %s\n", i, em28xx_boards[i].name); 3056 } 3057 return -1; 3058 } 3059 3060 static void em28xx_card_setup(struct em28xx *dev) 3061 { 3062 int i, j, idx; 3063 bool duplicate_entry; 3064 3065 /* 3066 * If the device can be a webcam, seek for a sensor. 3067 * If sensor is not found, then it isn't a webcam. 3068 */ 3069 if (dev->is_webcam) { 3070 em28xx_detect_sensor(dev); 3071 if (dev->em28xx_sensor == EM28XX_NOSENSOR) 3072 /* NOTE: error/unknown sensor/no sensor */ 3073 dev->is_webcam = 0; 3074 } 3075 3076 switch (dev->model) { 3077 case EM2750_BOARD_UNKNOWN: 3078 case EM2820_BOARD_UNKNOWN: 3079 case EM2800_BOARD_UNKNOWN: 3080 /* 3081 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD. 3082 * 3083 * This occurs because they share identical USB vendor and 3084 * product IDs. 3085 * 3086 * What we do here is look up the EEPROM hash of the K-WORLD 3087 * and if it is found then we decide that we do not have 3088 * a DIGIVOX and reset the device to the K-WORLD instead. 3089 * 3090 * This solution is only valid if they do not share eeprom 3091 * hash identities which has not been determined as yet. 3092 */ 3093 if (em28xx_hint_board(dev) < 0) { 3094 dev_err(&dev->intf->dev, "Board not discovered\n"); 3095 } else { 3096 em28xx_set_model(dev); 3097 em28xx_pre_card_setup(dev); 3098 } 3099 break; 3100 default: 3101 em28xx_set_model(dev); 3102 } 3103 3104 dev_info(&dev->intf->dev, "Identified as %s (card=%d)\n", 3105 dev->board.name, dev->model); 3106 3107 dev->tuner_type = em28xx_boards[dev->model].tuner_type; 3108 3109 /* request some modules */ 3110 switch (dev->model) { 3111 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2: 3112 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: 3113 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: 3114 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: 3115 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: 3116 case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C: 3117 case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB: 3118 case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595: 3119 { 3120 struct tveeprom tv; 3121 3122 if (!dev->eedata) 3123 break; 3124 #if defined(CONFIG_MODULES) && defined(MODULE) 3125 request_module("tveeprom"); 3126 #endif 3127 /* Call first TVeeprom */ 3128 3129 tveeprom_hauppauge_analog(&tv, dev->eedata); 3130 3131 dev->tuner_type = tv.tuner_type; 3132 3133 if (tv.audio_processor == TVEEPROM_AUDPROC_MSP) { 3134 dev->i2s_speed = 2048000; 3135 dev->has_msp34xx = 1; 3136 } 3137 break; 3138 } 3139 case EM2882_BOARD_KWORLD_ATSC_315U: 3140 em28xx_write_reg(dev, 0x0d, 0x42); 3141 usleep_range(10000, 11000); 3142 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 3143 usleep_range(10000, 11000); 3144 break; 3145 case EM2820_BOARD_KWORLD_PVRTV2800RF: 3146 /* GPIO enables sound on KWORLD PVR TV 2800RF */ 3147 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf9); 3148 break; 3149 case EM2820_BOARD_UNKNOWN: 3150 case EM2800_BOARD_UNKNOWN: 3151 /* 3152 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD. 3153 * 3154 * This occurs because they share identical USB vendor and 3155 * product IDs. 3156 * 3157 * What we do here is look up the EEPROM hash of the K-WORLD 3158 * and if it is found then we decide that we do not have 3159 * a DIGIVOX and reset the device to the K-WORLD instead. 3160 * 3161 * This solution is only valid if they do not share eeprom 3162 * hash identities which has not been determined as yet. 3163 */ 3164 case EM2880_BOARD_MSI_DIGIVOX_AD: 3165 if (!em28xx_hint_board(dev)) 3166 em28xx_set_model(dev); 3167 3168 /* 3169 * In cases where we had to use a board hint, the call to 3170 * em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, 3171 * so make the call now so the analog GPIOs are set properly 3172 * before probing the i2c bus. 3173 */ 3174 em28xx_gpio_set(dev, dev->board.tuner_gpio); 3175 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 3176 break; 3177 3178 /* 3179 * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR. 3180 * 3181 * This occurs because they share identical USB vendor and 3182 * product IDs. 3183 * 3184 * What we do here is look up the EEPROM hash of the Dikom 3185 * and if it is found then we decide that we do not have 3186 * a Kworld and reset the device to the Dikom instead. 3187 * 3188 * This solution is only valid if they do not share eeprom 3189 * hash identities which has not been determined as yet. 3190 */ 3191 case EM2882_BOARD_KWORLD_VS_DVBT: 3192 if (!em28xx_hint_board(dev)) 3193 em28xx_set_model(dev); 3194 3195 /* 3196 * In cases where we had to use a board hint, the call to 3197 * em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, 3198 * so make the call now so the analog GPIOs are set properly 3199 * before probing the i2c bus. 3200 */ 3201 em28xx_gpio_set(dev, dev->board.tuner_gpio); 3202 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 3203 break; 3204 } 3205 3206 if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) { 3207 dev_err(&dev->intf->dev, 3208 "\n\n" 3209 "The support for this board weren't valid yet.\n" 3210 "Please send a report of having this working\n" 3211 "not to V4L mailing list (and/or to other addresses)\n\n"); 3212 } 3213 3214 /* Free eeprom data memory */ 3215 kfree(dev->eedata); 3216 dev->eedata = NULL; 3217 3218 /* Allow override tuner type by a module parameter */ 3219 if (tuner >= 0) 3220 dev->tuner_type = tuner; 3221 3222 /* 3223 * Dynamically generate a list of valid audio inputs for this 3224 * specific board, mapping them via enum em28xx_amux. 3225 */ 3226 3227 idx = 0; 3228 for (i = 0; i < MAX_EM28XX_INPUT; i++) { 3229 if (!INPUT(i)->type) 3230 continue; 3231 3232 /* Skip already mapped audio inputs */ 3233 duplicate_entry = false; 3234 for (j = 0; j < idx; j++) { 3235 if (INPUT(i)->amux == dev->amux_map[j]) { 3236 duplicate_entry = true; 3237 break; 3238 } 3239 } 3240 if (duplicate_entry) 3241 continue; 3242 3243 dev->amux_map[idx++] = INPUT(i)->amux; 3244 } 3245 for (; idx < MAX_EM28XX_INPUT; idx++) 3246 dev->amux_map[idx] = EM28XX_AMUX_UNUSED; 3247 } 3248 3249 void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) 3250 { 3251 memset(ctl, 0, sizeof(*ctl)); 3252 3253 ctl->fname = XC2028_DEFAULT_FIRMWARE; 3254 ctl->max_len = 64; 3255 ctl->mts = em28xx_boards[dev->model].mts_firmware; 3256 3257 switch (dev->model) { 3258 case EM2880_BOARD_EMPIRE_DUAL_TV: 3259 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: 3260 case EM2882_BOARD_TERRATEC_HYBRID_XS: 3261 case EM2880_BOARD_TERRATEC_HYBRID_XS: 3262 case EM2880_BOARD_TERRATEC_HYBRID_XS_FR: 3263 case EM2881_BOARD_PINNACLE_HYBRID_PRO: 3264 case EM2882_BOARD_ZOLID_HYBRID_TV_STICK: 3265 ctl->demod = XC3028_FE_ZARLINK456; 3266 break; 3267 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: 3268 case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E: 3269 ctl->demod = XC3028_FE_DEFAULT; 3270 break; 3271 case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600: 3272 ctl->demod = XC3028_FE_DEFAULT; 3273 ctl->fname = XC3028L_DEFAULT_FIRMWARE; 3274 break; 3275 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: 3276 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: 3277 case EM2880_BOARD_PINNACLE_PCTV_HD_PRO: 3278 /* FIXME: Better to specify the needed IF */ 3279 ctl->demod = XC3028_FE_DEFAULT; 3280 break; 3281 case EM2883_BOARD_KWORLD_HYBRID_330U: 3282 case EM2882_BOARD_DIKOM_DK300: 3283 case EM2882_BOARD_KWORLD_VS_DVBT: 3284 ctl->demod = XC3028_FE_CHINA; 3285 ctl->fname = XC2028_DEFAULT_FIRMWARE; 3286 break; 3287 case EM2882_BOARD_EVGA_INDTUBE: 3288 ctl->demod = XC3028_FE_CHINA; 3289 ctl->fname = XC3028L_DEFAULT_FIRMWARE; 3290 break; 3291 default: 3292 ctl->demod = XC3028_FE_OREN538; 3293 } 3294 } 3295 EXPORT_SYMBOL_GPL(em28xx_setup_xc3028); 3296 3297 static void request_module_async(struct work_struct *work) 3298 { 3299 struct em28xx *dev = container_of(work, 3300 struct em28xx, request_module_wk); 3301 3302 /* 3303 * The em28xx extensions can be modules or builtin. If the 3304 * modules are already loaded or are built in, those extensions 3305 * can be initialised right now. Otherwise, the module init 3306 * code will do it. 3307 */ 3308 3309 /* 3310 * Devices with an audio-only intf also have a V4L/DVB/RC 3311 * intf. Don't register extensions twice on those devices. 3312 */ 3313 if (dev->is_audio_only) { 3314 #if defined(CONFIG_MODULES) && defined(MODULE) 3315 request_module("em28xx-alsa"); 3316 #endif 3317 return; 3318 } 3319 3320 em28xx_init_extension(dev); 3321 3322 #if defined(CONFIG_MODULES) && defined(MODULE) 3323 if (dev->has_video) 3324 request_module("em28xx-v4l"); 3325 if (dev->usb_audio_type == EM28XX_USB_AUDIO_CLASS) 3326 request_module("snd-usb-audio"); 3327 else if (dev->usb_audio_type == EM28XX_USB_AUDIO_VENDOR) 3328 request_module("em28xx-alsa"); 3329 if (dev->board.has_dvb) 3330 request_module("em28xx-dvb"); 3331 if (dev->board.buttons || 3332 ((dev->board.ir_codes || dev->board.has_ir_i2c) && !disable_ir)) 3333 request_module("em28xx-rc"); 3334 #endif /* CONFIG_MODULES */ 3335 } 3336 3337 static void request_modules(struct em28xx *dev) 3338 { 3339 INIT_WORK(&dev->request_module_wk, request_module_async); 3340 schedule_work(&dev->request_module_wk); 3341 } 3342 3343 static void flush_request_modules(struct em28xx *dev) 3344 { 3345 flush_work(&dev->request_module_wk); 3346 } 3347 3348 static int em28xx_media_device_init(struct em28xx *dev, 3349 struct usb_device *udev) 3350 { 3351 #ifdef CONFIG_MEDIA_CONTROLLER 3352 struct media_device *mdev; 3353 3354 mdev = kzalloc(sizeof(*mdev), GFP_KERNEL); 3355 if (!mdev) 3356 return -ENOMEM; 3357 3358 if (udev->product) 3359 media_device_usb_init(mdev, udev, udev->product); 3360 else if (udev->manufacturer) 3361 media_device_usb_init(mdev, udev, udev->manufacturer); 3362 else 3363 media_device_usb_init(mdev, udev, dev_name(&dev->intf->dev)); 3364 3365 dev->media_dev = mdev; 3366 #endif 3367 return 0; 3368 } 3369 3370 static void em28xx_unregister_media_device(struct em28xx *dev) 3371 { 3372 #ifdef CONFIG_MEDIA_CONTROLLER 3373 if (dev->media_dev) { 3374 media_device_unregister(dev->media_dev); 3375 media_device_cleanup(dev->media_dev); 3376 kfree(dev->media_dev); 3377 dev->media_dev = NULL; 3378 } 3379 #endif 3380 } 3381 3382 /* 3383 * em28xx_release_resources() 3384 * unregisters the v4l2,i2c and usb devices 3385 * called when the device gets disconnected or at module unload 3386 */ 3387 static void em28xx_release_resources(struct em28xx *dev) 3388 { 3389 struct usb_device *udev = interface_to_usbdev(dev->intf); 3390 3391 /*FIXME: I2C IR should be disconnected */ 3392 3393 mutex_lock(&dev->lock); 3394 3395 em28xx_unregister_media_device(dev); 3396 3397 if (dev->def_i2c_bus) 3398 em28xx_i2c_unregister(dev, 1); 3399 em28xx_i2c_unregister(dev, 0); 3400 3401 if (dev->ts == PRIMARY_TS) 3402 usb_put_dev(udev); 3403 3404 /* Mark device as unused */ 3405 clear_bit(dev->devno, em28xx_devused); 3406 3407 mutex_unlock(&dev->lock); 3408 }; 3409 3410 /** 3411 * em28xx_free_device() - Free em28xx device 3412 * 3413 * @ref: struct kref for em28xx device 3414 * 3415 * This is called when all extensions and em28xx core unregisters a device 3416 */ 3417 void em28xx_free_device(struct kref *ref) 3418 { 3419 struct em28xx *dev = kref_to_dev(ref); 3420 3421 dev_info(&dev->intf->dev, "Freeing device\n"); 3422 3423 if (!dev->disconnected) 3424 em28xx_release_resources(dev); 3425 3426 if (dev->ts == PRIMARY_TS) 3427 kfree(dev->alt_max_pkt_size_isoc); 3428 3429 kfree(dev); 3430 } 3431 EXPORT_SYMBOL_GPL(em28xx_free_device); 3432 3433 /* 3434 * em28xx_init_dev() 3435 * allocates and inits the device structs, registers i2c bus and v4l device 3436 */ 3437 static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, 3438 struct usb_interface *intf, 3439 int minor) 3440 { 3441 int retval; 3442 const char *chip_name = NULL; 3443 3444 dev->intf = intf; 3445 mutex_init(&dev->ctrl_urb_lock); 3446 spin_lock_init(&dev->slock); 3447 3448 dev->em28xx_write_regs = em28xx_write_regs; 3449 dev->em28xx_read_reg = em28xx_read_reg; 3450 dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len; 3451 dev->em28xx_write_regs_req = em28xx_write_regs_req; 3452 dev->em28xx_read_reg_req = em28xx_read_reg_req; 3453 dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800; 3454 3455 em28xx_set_model(dev); 3456 3457 dev->wait_after_write = 5; 3458 3459 /* Based on the Chip ID, set the device configuration */ 3460 retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID); 3461 if (retval > 0) { 3462 dev->chip_id = retval; 3463 3464 switch (dev->chip_id) { 3465 case CHIP_ID_EM2800: 3466 chip_name = "em2800"; 3467 break; 3468 case CHIP_ID_EM2710: 3469 chip_name = "em2710"; 3470 break; 3471 case CHIP_ID_EM2750: 3472 chip_name = "em2750"; 3473 break; 3474 case CHIP_ID_EM2765: 3475 chip_name = "em2765"; 3476 dev->wait_after_write = 0; 3477 dev->is_em25xx = 1; 3478 dev->eeprom_addrwidth_16bit = 1; 3479 break; 3480 case CHIP_ID_EM2820: 3481 chip_name = "em2710/2820"; 3482 if (le16_to_cpu(udev->descriptor.idVendor) == 0xeb1a) { 3483 __le16 idProd = udev->descriptor.idProduct; 3484 3485 if (le16_to_cpu(idProd) == 0x2710) 3486 chip_name = "em2710"; 3487 else if (le16_to_cpu(idProd) == 0x2820) 3488 chip_name = "em2820"; 3489 } 3490 /* NOTE: the em2820 is used in webcams, too ! */ 3491 break; 3492 case CHIP_ID_EM2840: 3493 chip_name = "em2840"; 3494 break; 3495 case CHIP_ID_EM2860: 3496 chip_name = "em2860"; 3497 break; 3498 case CHIP_ID_EM2870: 3499 chip_name = "em2870"; 3500 dev->wait_after_write = 0; 3501 break; 3502 case CHIP_ID_EM2874: 3503 chip_name = "em2874"; 3504 dev->wait_after_write = 0; 3505 dev->eeprom_addrwidth_16bit = 1; 3506 break; 3507 case CHIP_ID_EM28174: 3508 chip_name = "em28174"; 3509 dev->wait_after_write = 0; 3510 dev->eeprom_addrwidth_16bit = 1; 3511 break; 3512 case CHIP_ID_EM28178: 3513 chip_name = "em28178"; 3514 dev->wait_after_write = 0; 3515 dev->eeprom_addrwidth_16bit = 1; 3516 break; 3517 case CHIP_ID_EM2883: 3518 chip_name = "em2882/3"; 3519 dev->wait_after_write = 0; 3520 break; 3521 case CHIP_ID_EM2884: 3522 chip_name = "em2884"; 3523 dev->wait_after_write = 0; 3524 dev->eeprom_addrwidth_16bit = 1; 3525 break; 3526 } 3527 } 3528 if (!chip_name) 3529 dev_info(&dev->intf->dev, 3530 "unknown em28xx chip ID (%d)\n", dev->chip_id); 3531 else 3532 dev_info(&dev->intf->dev, "chip ID is %s\n", chip_name); 3533 3534 em28xx_media_device_init(dev, udev); 3535 3536 if (dev->is_audio_only) { 3537 retval = em28xx_audio_setup(dev); 3538 if (retval) 3539 return -ENODEV; 3540 em28xx_init_extension(dev); 3541 3542 return 0; 3543 } 3544 3545 em28xx_pre_card_setup(dev); 3546 3547 rt_mutex_init(&dev->i2c_bus_lock); 3548 3549 /* register i2c bus 0 */ 3550 if (dev->board.is_em2800) 3551 retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM2800); 3552 else 3553 retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM28XX); 3554 if (retval < 0) { 3555 dev_err(&dev->intf->dev, 3556 "%s: em28xx_i2c_register bus 0 - error [%d]!\n", 3557 __func__, retval); 3558 return retval; 3559 } 3560 3561 /* register i2c bus 1 */ 3562 if (dev->def_i2c_bus) { 3563 if (dev->is_em25xx) 3564 retval = em28xx_i2c_register(dev, 1, 3565 EM28XX_I2C_ALGO_EM25XX_BUS_B); 3566 else 3567 retval = em28xx_i2c_register(dev, 1, 3568 EM28XX_I2C_ALGO_EM28XX); 3569 if (retval < 0) { 3570 dev_err(&dev->intf->dev, 3571 "%s: em28xx_i2c_register bus 1 - error [%d]!\n", 3572 __func__, retval); 3573 3574 em28xx_i2c_unregister(dev, 0); 3575 3576 return retval; 3577 } 3578 } 3579 3580 /* Do board specific init and eeprom reading */ 3581 em28xx_card_setup(dev); 3582 3583 return 0; 3584 } 3585 3586 static int em28xx_duplicate_dev(struct em28xx *dev) 3587 { 3588 int nr; 3589 struct em28xx *sec_dev = kmemdup(dev, sizeof(*sec_dev), GFP_KERNEL); 3590 3591 if (!sec_dev) { 3592 dev->dev_next = NULL; 3593 return -ENOMEM; 3594 } 3595 /* Check to see next free device and mark as used */ 3596 do { 3597 nr = find_first_zero_bit(em28xx_devused, EM28XX_MAXBOARDS); 3598 if (nr >= EM28XX_MAXBOARDS) { 3599 /* No free device slots */ 3600 dev_warn(&dev->intf->dev, ": Supports only %i em28xx boards.\n", 3601 EM28XX_MAXBOARDS); 3602 kfree(sec_dev); 3603 dev->dev_next = NULL; 3604 return -ENOMEM; 3605 } 3606 } while (test_and_set_bit(nr, em28xx_devused)); 3607 sec_dev->devno = nr; 3608 snprintf(sec_dev->name, 28, "em28xx #%d", nr); 3609 sec_dev->dev_next = NULL; 3610 dev->dev_next = sec_dev; 3611 return 0; 3612 } 3613 3614 /* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */ 3615 #define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) 3616 3617 static void em28xx_check_usb_descriptor(struct em28xx *dev, 3618 struct usb_device *udev, 3619 struct usb_interface *intf, 3620 int alt, int ep, 3621 bool *has_vendor_audio, 3622 bool *has_video, 3623 bool *has_dvb) 3624 { 3625 const struct usb_endpoint_descriptor *e; 3626 int sizedescr, size; 3627 3628 /* 3629 * NOTE: 3630 * 3631 * Old logic with support for isoc transfers only was: 3632 * 0x82 isoc => analog 3633 * 0x83 isoc => audio 3634 * 0x84 isoc => digital 3635 * 3636 * New logic with support for bulk transfers 3637 * 0x82 isoc => analog 3638 * 0x82 bulk => analog 3639 * 0x83 isoc* => audio 3640 * 0x84 isoc => digital 3641 * 0x84 bulk => analog or digital** 3642 * 0x85 isoc => digital TS2 3643 * 0x85 bulk => digital TS2 3644 * (*: audio should always be isoc) 3645 * (**: analog, if ep 0x82 is isoc, otherwise digital) 3646 * 3647 * The new logic preserves backwards compatibility and 3648 * reflects the endpoint configurations we have seen 3649 * so far. But there might be devices for which this 3650 * logic is not sufficient... 3651 */ 3652 3653 e = &intf->altsetting[alt].endpoint[ep].desc; 3654 3655 if (!usb_endpoint_dir_in(e)) 3656 return; 3657 3658 sizedescr = le16_to_cpu(e->wMaxPacketSize); 3659 size = sizedescr & 0x7ff; 3660 3661 if (udev->speed == USB_SPEED_HIGH) 3662 size = size * hb_mult(sizedescr); 3663 3664 /* Only inspect input endpoints */ 3665 3666 switch (e->bEndpointAddress) { 3667 case 0x82: 3668 *has_video = true; 3669 if (usb_endpoint_xfer_isoc(e)) { 3670 dev->analog_ep_isoc = e->bEndpointAddress; 3671 dev->alt_max_pkt_size_isoc[alt] = size; 3672 } else if (usb_endpoint_xfer_bulk(e)) { 3673 dev->analog_ep_bulk = e->bEndpointAddress; 3674 } 3675 return; 3676 case 0x83: 3677 if (usb_endpoint_xfer_isoc(e)) 3678 *has_vendor_audio = true; 3679 else 3680 dev_err(&intf->dev, 3681 "error: skipping audio endpoint 0x83, because it uses bulk transfers !\n"); 3682 return; 3683 case 0x84: 3684 if (*has_video && (usb_endpoint_xfer_bulk(e))) { 3685 dev->analog_ep_bulk = e->bEndpointAddress; 3686 } else { 3687 if (usb_endpoint_xfer_isoc(e)) { 3688 if (size > dev->dvb_max_pkt_size_isoc) { 3689 /* 3690 * 2) some manufacturers (e.g. Terratec) 3691 * disable endpoints by setting 3692 * wMaxPacketSize to 0 bytes for all 3693 * alt settings. So far, we've seen 3694 * this for DVB isoc endpoints only. 3695 */ 3696 *has_dvb = true; 3697 dev->dvb_ep_isoc = e->bEndpointAddress; 3698 dev->dvb_max_pkt_size_isoc = size; 3699 dev->dvb_alt_isoc = alt; 3700 } 3701 } else { 3702 *has_dvb = true; 3703 dev->dvb_ep_bulk = e->bEndpointAddress; 3704 } 3705 } 3706 return; 3707 case 0x85: 3708 if (usb_endpoint_xfer_isoc(e)) { 3709 if (size > dev->dvb_max_pkt_size_isoc_ts2) { 3710 dev->dvb_ep_isoc_ts2 = e->bEndpointAddress; 3711 dev->dvb_max_pkt_size_isoc_ts2 = size; 3712 dev->dvb_alt_isoc = alt; 3713 } 3714 } else { 3715 dev->dvb_ep_bulk_ts2 = e->bEndpointAddress; 3716 } 3717 return; 3718 } 3719 } 3720 3721 /* 3722 * em28xx_usb_probe() 3723 * checks for supported devices 3724 */ 3725 static int em28xx_usb_probe(struct usb_interface *intf, 3726 const struct usb_device_id *id) 3727 { 3728 struct usb_device *udev; 3729 struct em28xx *dev = NULL; 3730 int retval; 3731 bool has_vendor_audio = false, has_video = false, has_dvb = false; 3732 int i, nr, try_bulk; 3733 const int ifnum = intf->altsetting[0].desc.bInterfaceNumber; 3734 char *speed; 3735 3736 udev = usb_get_dev(interface_to_usbdev(intf)); 3737 3738 /* Check to see next free device and mark as used */ 3739 do { 3740 nr = find_first_zero_bit(em28xx_devused, EM28XX_MAXBOARDS); 3741 if (nr >= EM28XX_MAXBOARDS) { 3742 /* No free device slots */ 3743 dev_err(&intf->dev, 3744 "Driver supports up to %i em28xx boards.\n", 3745 EM28XX_MAXBOARDS); 3746 retval = -ENOMEM; 3747 goto err_no_slot; 3748 } 3749 } while (test_and_set_bit(nr, em28xx_devused)); 3750 3751 /* Don't register audio interfaces */ 3752 if (intf->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { 3753 dev_info(&intf->dev, 3754 "audio device (%04x:%04x): interface %i, class %i\n", 3755 le16_to_cpu(udev->descriptor.idVendor), 3756 le16_to_cpu(udev->descriptor.idProduct), 3757 ifnum, 3758 intf->altsetting[0].desc.bInterfaceClass); 3759 3760 retval = -ENODEV; 3761 goto err; 3762 } 3763 3764 /* allocate memory for our device state and initialize it */ 3765 dev = kzalloc(sizeof(*dev), GFP_KERNEL); 3766 if (!dev) { 3767 retval = -ENOMEM; 3768 goto err; 3769 } 3770 3771 /* compute alternate max packet sizes */ 3772 dev->alt_max_pkt_size_isoc = kcalloc(intf->num_altsetting, 3773 sizeof(dev->alt_max_pkt_size_isoc[0]), 3774 GFP_KERNEL); 3775 if (!dev->alt_max_pkt_size_isoc) { 3776 kfree(dev); 3777 retval = -ENOMEM; 3778 goto err; 3779 } 3780 3781 /* Get endpoints */ 3782 for (i = 0; i < intf->num_altsetting; i++) { 3783 int ep; 3784 3785 for (ep = 0; 3786 ep < intf->altsetting[i].desc.bNumEndpoints; 3787 ep++) 3788 em28xx_check_usb_descriptor(dev, udev, intf, 3789 i, ep, 3790 &has_vendor_audio, 3791 &has_video, 3792 &has_dvb); 3793 } 3794 3795 if (!(has_vendor_audio || has_video || has_dvb)) { 3796 retval = -ENODEV; 3797 goto err_free; 3798 } 3799 3800 switch (udev->speed) { 3801 case USB_SPEED_LOW: 3802 speed = "1.5"; 3803 break; 3804 case USB_SPEED_UNKNOWN: 3805 case USB_SPEED_FULL: 3806 speed = "12"; 3807 break; 3808 case USB_SPEED_HIGH: 3809 speed = "480"; 3810 break; 3811 default: 3812 speed = "unknown"; 3813 } 3814 3815 dev_info(&intf->dev, 3816 "New device %s %s @ %s Mbps (%04x:%04x, interface %d, class %d)\n", 3817 udev->manufacturer ? udev->manufacturer : "", 3818 udev->product ? udev->product : "", 3819 speed, 3820 le16_to_cpu(udev->descriptor.idVendor), 3821 le16_to_cpu(udev->descriptor.idProduct), 3822 ifnum, 3823 intf->altsetting->desc.bInterfaceNumber); 3824 3825 /* 3826 * Make sure we have 480 Mbps of bandwidth, otherwise things like 3827 * video stream wouldn't likely work, since 12 Mbps is generally 3828 * not enough even for most Digital TV streams. 3829 */ 3830 if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) { 3831 dev_err(&intf->dev, "Device initialization failed.\n"); 3832 dev_err(&intf->dev, 3833 "Device must be connected to a high-speed USB 2.0 port.\n"); 3834 retval = -ENODEV; 3835 goto err_free; 3836 } 3837 3838 dev->devno = nr; 3839 dev->model = id->driver_info; 3840 dev->alt = -1; 3841 dev->is_audio_only = has_vendor_audio && !(has_video || has_dvb); 3842 dev->has_video = has_video; 3843 dev->ifnum = ifnum; 3844 3845 dev->ts = PRIMARY_TS; 3846 snprintf(dev->name, 28, "em28xx"); 3847 dev->dev_next = NULL; 3848 3849 if (has_vendor_audio) { 3850 dev_info(&intf->dev, 3851 "Audio interface %i found (Vendor Class)\n", ifnum); 3852 dev->usb_audio_type = EM28XX_USB_AUDIO_VENDOR; 3853 } 3854 /* Checks if audio is provided by a USB Audio Class intf */ 3855 for (i = 0; i < udev->config->desc.bNumInterfaces; i++) { 3856 struct usb_interface *uif = udev->config->interface[i]; 3857 3858 if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { 3859 if (has_vendor_audio) 3860 dev_err(&intf->dev, 3861 "em28xx: device seems to have vendor AND usb audio class interfaces !\n" 3862 "\t\tThe vendor interface will be ignored. Please contact the developers <linux-media@vger.kernel.org>\n"); 3863 dev->usb_audio_type = EM28XX_USB_AUDIO_CLASS; 3864 break; 3865 } 3866 } 3867 3868 if (has_video) 3869 dev_info(&intf->dev, "Video interface %i found:%s%s\n", 3870 ifnum, 3871 dev->analog_ep_bulk ? " bulk" : "", 3872 dev->analog_ep_isoc ? " isoc" : ""); 3873 if (has_dvb) 3874 dev_info(&intf->dev, "DVB interface %i found:%s%s\n", 3875 ifnum, 3876 dev->dvb_ep_bulk ? " bulk" : "", 3877 dev->dvb_ep_isoc ? " isoc" : ""); 3878 3879 dev->num_alt = intf->num_altsetting; 3880 3881 if ((unsigned int)card[nr] < em28xx_bcount) 3882 dev->model = card[nr]; 3883 3884 /* save our data pointer in this intf device */ 3885 usb_set_intfdata(intf, dev); 3886 3887 /* allocate device struct and check if the device is a webcam */ 3888 mutex_init(&dev->lock); 3889 retval = em28xx_init_dev(dev, udev, intf, nr); 3890 if (retval) 3891 goto err_free; 3892 3893 if (usb_xfer_mode < 0) { 3894 if (dev->is_webcam) 3895 try_bulk = 1; 3896 else 3897 try_bulk = 0; 3898 } else { 3899 try_bulk = usb_xfer_mode > 0; 3900 } 3901 3902 /* Disable V4L2 if the device doesn't have a decoder or image sensor */ 3903 if (has_video && 3904 dev->board.decoder == EM28XX_NODECODER && 3905 dev->em28xx_sensor == EM28XX_NOSENSOR) { 3906 dev_err(&intf->dev, 3907 "Currently, V4L2 is not supported on this model\n"); 3908 has_video = false; 3909 dev->has_video = false; 3910 } 3911 3912 if (dev->board.has_dual_ts && 3913 (dev->tuner_type != TUNER_ABSENT || INPUT(0)->type)) { 3914 /* 3915 * The logic with sets alternate is not ready for dual-tuners 3916 * which analog modes. 3917 */ 3918 dev_err(&intf->dev, 3919 "We currently don't support analog TV or stream capture on dual tuners.\n"); 3920 has_video = false; 3921 } 3922 3923 /* Select USB transfer types to use */ 3924 if (has_video) { 3925 if (!dev->analog_ep_isoc || (try_bulk && dev->analog_ep_bulk)) 3926 dev->analog_xfer_bulk = 1; 3927 dev_info(&intf->dev, "analog set to %s mode.\n", 3928 dev->analog_xfer_bulk ? "bulk" : "isoc"); 3929 } 3930 if (has_dvb) { 3931 if (!dev->dvb_ep_isoc || (try_bulk && dev->dvb_ep_bulk)) 3932 dev->dvb_xfer_bulk = 1; 3933 dev_info(&intf->dev, "dvb set to %s mode.\n", 3934 dev->dvb_xfer_bulk ? "bulk" : "isoc"); 3935 } 3936 3937 if (dev->board.has_dual_ts && em28xx_duplicate_dev(dev) == 0) { 3938 dev->dev_next->ts = SECONDARY_TS; 3939 dev->dev_next->alt = -1; 3940 dev->dev_next->is_audio_only = has_vendor_audio && 3941 !(has_video || has_dvb); 3942 dev->dev_next->has_video = false; 3943 dev->dev_next->ifnum = ifnum; 3944 dev->dev_next->model = id->driver_info; 3945 3946 mutex_init(&dev->dev_next->lock); 3947 retval = em28xx_init_dev(dev->dev_next, udev, intf, 3948 dev->dev_next->devno); 3949 if (retval) 3950 goto err_free; 3951 3952 dev->dev_next->board.ir_codes = NULL; /* No IR for 2nd tuner */ 3953 dev->dev_next->board.has_ir_i2c = 0; /* No IR for 2nd tuner */ 3954 3955 if (usb_xfer_mode < 0) { 3956 if (dev->dev_next->is_webcam) 3957 try_bulk = 1; 3958 else 3959 try_bulk = 0; 3960 } else { 3961 try_bulk = usb_xfer_mode > 0; 3962 } 3963 3964 /* Select USB transfer types to use */ 3965 if (has_dvb) { 3966 if (!dev->dvb_ep_isoc_ts2 || 3967 (try_bulk && dev->dvb_ep_bulk_ts2)) 3968 dev->dev_next->dvb_xfer_bulk = 1; 3969 dev_info(&dev->intf->dev, "dvb ts2 set to %s mode.\n", 3970 dev->dev_next->dvb_xfer_bulk ? "bulk" : "isoc"); 3971 } 3972 3973 dev->dev_next->dvb_ep_isoc = dev->dvb_ep_isoc_ts2; 3974 dev->dev_next->dvb_ep_bulk = dev->dvb_ep_bulk_ts2; 3975 dev->dev_next->dvb_max_pkt_size_isoc = dev->dvb_max_pkt_size_isoc_ts2; 3976 dev->dev_next->dvb_alt_isoc = dev->dvb_alt_isoc; 3977 3978 /* Configuare hardware to support TS2*/ 3979 if (dev->dvb_xfer_bulk) { 3980 /* The ep4 and ep5 are configuared for BULK */ 3981 em28xx_write_reg(dev, 0x0b, 0x96); 3982 mdelay(100); 3983 em28xx_write_reg(dev, 0x0b, 0x80); 3984 mdelay(100); 3985 } else { 3986 /* The ep4 and ep5 are configuared for ISO */ 3987 em28xx_write_reg(dev, 0x0b, 0x96); 3988 mdelay(100); 3989 em28xx_write_reg(dev, 0x0b, 0x82); 3990 mdelay(100); 3991 } 3992 3993 kref_init(&dev->dev_next->ref); 3994 } 3995 3996 kref_init(&dev->ref); 3997 3998 request_modules(dev); 3999 4000 /* 4001 * Do it at the end, to reduce dynamic configuration changes during 4002 * the device init. Yet, as request_modules() can be async, the 4003 * topology will likely change after the load of the em28xx subdrivers. 4004 */ 4005 #ifdef CONFIG_MEDIA_CONTROLLER 4006 retval = media_device_register(dev->media_dev); 4007 #endif 4008 4009 return 0; 4010 4011 err_free: 4012 kfree(dev->alt_max_pkt_size_isoc); 4013 kfree(dev); 4014 4015 err: 4016 clear_bit(nr, em28xx_devused); 4017 4018 err_no_slot: 4019 usb_put_dev(udev); 4020 return retval; 4021 } 4022 4023 /* 4024 * em28xx_usb_disconnect() 4025 * called when the device gets disconnected 4026 * video device will be unregistered on v4l2_close in case it is still open 4027 */ 4028 static void em28xx_usb_disconnect(struct usb_interface *intf) 4029 { 4030 struct em28xx *dev; 4031 4032 dev = usb_get_intfdata(intf); 4033 usb_set_intfdata(intf, NULL); 4034 4035 if (!dev) 4036 return; 4037 4038 if (dev->dev_next) { 4039 dev->dev_next->disconnected = 1; 4040 dev_info(&dev->intf->dev, "Disconnecting %s\n", 4041 dev->dev_next->name); 4042 } 4043 4044 dev->disconnected = 1; 4045 4046 dev_info(&dev->intf->dev, "Disconnecting %s\n", dev->name); 4047 4048 flush_request_modules(dev); 4049 4050 em28xx_close_extension(dev); 4051 4052 if (dev->dev_next) 4053 em28xx_release_resources(dev->dev_next); 4054 em28xx_release_resources(dev); 4055 4056 if (dev->dev_next) { 4057 kref_put(&dev->dev_next->ref, em28xx_free_device); 4058 dev->dev_next = NULL; 4059 } 4060 kref_put(&dev->ref, em28xx_free_device); 4061 } 4062 4063 static int em28xx_usb_suspend(struct usb_interface *intf, 4064 pm_message_t message) 4065 { 4066 struct em28xx *dev; 4067 4068 dev = usb_get_intfdata(intf); 4069 if (!dev) 4070 return 0; 4071 em28xx_suspend_extension(dev); 4072 return 0; 4073 } 4074 4075 static int em28xx_usb_resume(struct usb_interface *intf) 4076 { 4077 struct em28xx *dev; 4078 4079 dev = usb_get_intfdata(intf); 4080 if (!dev) 4081 return 0; 4082 em28xx_resume_extension(dev); 4083 return 0; 4084 } 4085 4086 static struct usb_driver em28xx_usb_driver = { 4087 .name = "em28xx", 4088 .probe = em28xx_usb_probe, 4089 .disconnect = em28xx_usb_disconnect, 4090 .suspend = em28xx_usb_suspend, 4091 .resume = em28xx_usb_resume, 4092 .reset_resume = em28xx_usb_resume, 4093 .id_table = em28xx_id_table, 4094 }; 4095 4096 module_usb_driver(em28xx_usb_driver); 4097