1 /* 2 em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB 3 video capture devices 4 5 Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it> 6 Markus Rechberger <mrechberger@gmail.com> 7 Mauro Carvalho Chehab <mchehab@infradead.org> 8 Sascha Sommer <saschasommer@freenet.de> 9 Copyright (C) 2012 Frank Schäfer <fschaefer.oss@googlemail.com> 10 11 This program is free software; you can redistribute it and/or modify 12 it under the terms of the GNU General Public License as published by 13 the Free Software Foundation; either version 2 of the License, or 14 (at your option) any later version. 15 16 This program is distributed in the hope that it will be useful, 17 but WITHOUT ANY WARRANTY; without even the implied warranty of 18 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 GNU General Public License for more details. 20 21 You should have received a copy of the GNU General Public License 22 along with this program; if not, write to the Free Software 23 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 24 */ 25 26 #include <linux/init.h> 27 #include <linux/module.h> 28 #include <linux/slab.h> 29 #include <linux/delay.h> 30 #include <linux/i2c.h> 31 #include <linux/usb.h> 32 #include <media/tuner.h> 33 #include <media/msp3400.h> 34 #include <media/saa7115.h> 35 #include <media/tvp5150.h> 36 #include <media/tvaudio.h> 37 #include <media/i2c-addr.h> 38 #include <media/tveeprom.h> 39 #include <media/v4l2-common.h> 40 41 #include "em28xx.h" 42 43 #define DRIVER_NAME "em28xx" 44 45 static int tuner = -1; 46 module_param(tuner, int, 0444); 47 MODULE_PARM_DESC(tuner, "tuner type"); 48 49 static unsigned int disable_ir; 50 module_param(disable_ir, int, 0444); 51 MODULE_PARM_DESC(disable_ir, "disable infrared remote support"); 52 53 static unsigned int disable_usb_speed_check; 54 module_param(disable_usb_speed_check, int, 0444); 55 MODULE_PARM_DESC(disable_usb_speed_check, 56 "override min bandwidth requirement of 480M bps"); 57 58 static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U }; 59 module_param_array(card, int, NULL, 0444); 60 MODULE_PARM_DESC(card, "card type"); 61 62 static int usb_xfer_mode = -1; 63 module_param(usb_xfer_mode, int, 0444); 64 MODULE_PARM_DESC(usb_xfer_mode, 65 "USB transfer mode for frame data (-1 = auto, 0 = prefer isoc, 1 = prefer bulk)"); 66 67 68 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */ 69 DECLARE_BITMAP(em28xx_devused, EM28XX_MAXBOARDS); 70 71 struct em28xx_hash_table { 72 unsigned long hash; 73 unsigned int model; 74 unsigned int tuner; 75 }; 76 77 static void em28xx_pre_card_setup(struct em28xx *dev); 78 79 /* 80 * Reset sequences for analog/digital modes 81 */ 82 83 /* Reset for the most [analog] boards */ 84 static struct em28xx_reg_seq default_analog[] = { 85 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 86 { -1, -1, -1, -1}, 87 }; 88 89 /* Reset for the most [digital] boards */ 90 static struct em28xx_reg_seq default_digital[] = { 91 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 92 { -1, -1, -1, -1}, 93 }; 94 95 /* Board Hauppauge WinTV HVR 900 analog */ 96 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = { 97 {EM2820_R08_GPIO_CTRL, 0x2d, ~EM_GPIO_4, 10}, 98 { 0x05, 0xff, 0x10, 10}, 99 { -1, -1, -1, -1}, 100 }; 101 102 /* Board Hauppauge WinTV HVR 900 digital */ 103 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = { 104 {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10}, 105 {EM2880_R04_GPO, 0x04, 0x0f, 10}, 106 {EM2880_R04_GPO, 0x0c, 0x0f, 10}, 107 { -1, -1, -1, -1}, 108 }; 109 110 /* Board Hauppauge WinTV HVR 900 (R2) digital */ 111 static struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = { 112 {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10}, 113 {EM2880_R04_GPO, 0x0c, 0x0f, 10}, 114 { -1, -1, -1, -1}, 115 }; 116 117 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */ 118 static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = { 119 {EM2820_R08_GPIO_CTRL, 0x69, ~EM_GPIO_4, 10}, 120 { -1, -1, -1, -1}, 121 }; 122 123 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */ 124 125 /* Board - EM2870 Kworld 355u 126 Analog - No input analog */ 127 128 /* Board - EM2882 Kworld 315U digital */ 129 static struct em28xx_reg_seq em2882_kworld_315u_digital[] = { 130 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 131 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, 132 {EM2880_R04_GPO, 0x04, 0xff, 10}, 133 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 134 {EM2820_R08_GPIO_CTRL, 0x7e, 0xff, 10}, 135 { -1, -1, -1, -1}, 136 }; 137 138 static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = { 139 {EM2880_R04_GPO, 0x08, 0xff, 10}, 140 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 141 {EM2880_R04_GPO, 0x08, 0xff, 10}, 142 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 143 { -1, -1, -1, -1}, 144 }; 145 146 static struct em28xx_reg_seq kworld_330u_analog[] = { 147 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 148 {EM2880_R04_GPO, 0x00, 0xff, 10}, 149 { -1, -1, -1, -1}, 150 }; 151 152 static struct em28xx_reg_seq kworld_330u_digital[] = { 153 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 154 {EM2880_R04_GPO, 0x08, 0xff, 10}, 155 { -1, -1, -1, -1}, 156 }; 157 158 /* Evga inDtube 159 GPIO0 - Enable digital power (s5h1409) - low to enable 160 GPIO1 - Enable analog power (tvp5150/emp202) - low to enable 161 GPIO4 - xc3028 reset 162 GOP3 - s5h1409 reset 163 */ 164 static struct em28xx_reg_seq evga_indtube_analog[] = { 165 {EM2820_R08_GPIO_CTRL, 0x79, 0xff, 60}, 166 { -1, -1, -1, -1}, 167 }; 168 169 static struct em28xx_reg_seq evga_indtube_digital[] = { 170 {EM2820_R08_GPIO_CTRL, 0x7a, 0xff, 1}, 171 {EM2880_R04_GPO, 0x04, 0xff, 10}, 172 {EM2880_R04_GPO, 0x0c, 0xff, 1}, 173 { -1, -1, -1, -1}, 174 }; 175 176 /* 177 * KWorld PlusTV 340U, UB435-Q and UB435-Q V2 (ATSC) GPIOs map: 178 * EM_GPIO_0 - currently unknown 179 * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on) 180 * EM_GPIO_2 - currently unknown 181 * EM_GPIO_3 - currently unknown 182 * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset) 183 * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset) 184 * EM_GPIO_6 - currently unknown 185 * EM_GPIO_7 - currently unknown 186 */ 187 static struct em28xx_reg_seq kworld_a340_digital[] = { 188 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 189 { -1, -1, -1, -1}, 190 }; 191 192 /* Pinnacle Hybrid Pro eb1a:2881 */ 193 static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = { 194 {EM2820_R08_GPIO_CTRL, 0xfd, ~EM_GPIO_4, 10}, 195 { -1, -1, -1, -1}, 196 }; 197 198 static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = { 199 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 200 {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */ 201 {EM2880_R04_GPO, 0x0c, 0xff, 1}, 202 { -1, -1, -1, -1}, 203 }; 204 205 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = { 206 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 207 {EM2880_R04_GPO, 0x00, 0xff, 10}, 208 { -1, -1, -1, -1}, 209 }; 210 211 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = { 212 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 213 {EM2880_R04_GPO, 0x08, 0xff, 10}, 214 { -1, -1, -1, -1}, 215 }; 216 217 /* eb1a:2868 Reddo DVB-C USB TV Box 218 GPIO4 - CU1216L NIM 219 Other GPIOs seems to be don't care. */ 220 static struct em28xx_reg_seq reddo_dvb_c_usb_box[] = { 221 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, 222 {EM2820_R08_GPIO_CTRL, 0xde, 0xff, 10}, 223 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, 224 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 225 {EM2820_R08_GPIO_CTRL, 0x7f, 0xff, 10}, 226 {EM2820_R08_GPIO_CTRL, 0x6f, 0xff, 10}, 227 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 228 { -1, -1, -1, -1}, 229 }; 230 231 /* Callback for the most boards */ 232 static struct em28xx_reg_seq default_tuner_gpio[] = { 233 {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10}, 234 {EM2820_R08_GPIO_CTRL, 0, EM_GPIO_4, 10}, 235 {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10}, 236 { -1, -1, -1, -1}, 237 }; 238 239 /* Mute/unmute */ 240 static struct em28xx_reg_seq compro_unmute_tv_gpio[] = { 241 {EM2820_R08_GPIO_CTRL, 5, 7, 10}, 242 { -1, -1, -1, -1}, 243 }; 244 245 static struct em28xx_reg_seq compro_unmute_svid_gpio[] = { 246 {EM2820_R08_GPIO_CTRL, 4, 7, 10}, 247 { -1, -1, -1, -1}, 248 }; 249 250 static struct em28xx_reg_seq compro_mute_gpio[] = { 251 {EM2820_R08_GPIO_CTRL, 6, 7, 10}, 252 { -1, -1, -1, -1}, 253 }; 254 255 /* Terratec AV350 */ 256 static struct em28xx_reg_seq terratec_av350_mute_gpio[] = { 257 {EM2820_R08_GPIO_CTRL, 0xff, 0x7f, 10}, 258 { -1, -1, -1, -1}, 259 }; 260 261 static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = { 262 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 263 { -1, -1, -1, -1}, 264 }; 265 266 static struct em28xx_reg_seq silvercrest_reg_seq[] = { 267 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 268 {EM2820_R08_GPIO_CTRL, 0x01, 0xf7, 10}, 269 { -1, -1, -1, -1}, 270 }; 271 272 static struct em28xx_reg_seq vc211a_enable[] = { 273 {EM2820_R08_GPIO_CTRL, 0xff, 0x07, 10}, 274 {EM2820_R08_GPIO_CTRL, 0xff, 0x0f, 10}, 275 {EM2820_R08_GPIO_CTRL, 0xff, 0x0b, 10}, 276 { -1, -1, -1, -1}, 277 }; 278 279 static struct em28xx_reg_seq dikom_dk300_digital[] = { 280 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 281 {EM2880_R04_GPO, 0x08, 0xff, 10}, 282 { -1, -1, -1, -1}, 283 }; 284 285 286 /* Reset for the most [digital] boards */ 287 static struct em28xx_reg_seq leadership_digital[] = { 288 {EM2874_R80_GPIO_P0_CTRL, 0x70, 0xff, 10}, 289 { -1, -1, -1, -1}, 290 }; 291 292 static struct em28xx_reg_seq leadership_reset[] = { 293 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10}, 294 {EM2874_R80_GPIO_P0_CTRL, 0xb0, 0xff, 10}, 295 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10}, 296 { -1, -1, -1, -1}, 297 }; 298 299 /* 2013:024f PCTV nanoStick T2 290e 300 * GPIO_6 - demod reset 301 * GPIO_7 - LED 302 */ 303 static struct em28xx_reg_seq pctv_290e[] = { 304 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 80}, 305 {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 80}, /* GPIO_6 = 1 */ 306 {EM2874_R80_GPIO_P0_CTRL, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */ 307 { -1, -1, -1, -1}, 308 }; 309 310 #if 0 311 static struct em28xx_reg_seq terratec_h5_gpio[] = { 312 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 313 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100}, 314 {EM2874_R80_GPIO_P0_CTRL, 0xf2, 0xff, 50}, 315 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 50}, 316 { -1, -1, -1, -1}, 317 }; 318 319 static struct em28xx_reg_seq terratec_h5_digital[] = { 320 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10}, 321 {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, 322 {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10}, 323 { -1, -1, -1, -1}, 324 }; 325 #endif 326 327 /* 2013:024f PCTV DVB-S2 Stick 460e 328 * GPIO_0 - POWER_ON 329 * GPIO_1 - BOOST 330 * GPIO_2 - VUV_LNB (red LED) 331 * GPIO_3 - EXT_12V 332 * GPIO_4 - INT_DEM (DEMOD GPIO_0) 333 * GPIO_5 - INT_LNB 334 * GPIO_6 - RESET_DEM 335 * GPIO_7 - LED (green LED) 336 */ 337 static struct em28xx_reg_seq pctv_460e[] = { 338 {EM2874_R80_GPIO_P0_CTRL, 0x01, 0xff, 50}, 339 { 0x0d, 0xff, 0xff, 50}, 340 {EM2874_R80_GPIO_P0_CTRL, 0x41, 0xff, 50}, /* GPIO_6=1 */ 341 { 0x0d, 0x42, 0xff, 50}, 342 {EM2874_R80_GPIO_P0_CTRL, 0x61, 0xff, 50}, /* GPIO_5=1 */ 343 { -1, -1, -1, -1}, 344 }; 345 346 static struct em28xx_reg_seq c3tech_digital_duo_digital[] = { 347 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10}, 348 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, /* xc5000 reset */ 349 {EM2874_R80_GPIO_P0_CTRL, 0xf9, 0xff, 35}, 350 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, 351 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10}, 352 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 10}, 353 {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 10}, 354 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 20}, 355 { -1, -1, -1, -1}, 356 }; 357 358 /* 359 * 2013:0258 PCTV DVB-S2 Stick (461e) 360 * GPIO 0 = POWER_ON 361 * GPIO 1 = BOOST 362 * GPIO 2 = VUV_LNB (red LED) 363 * GPIO 3 = #EXT_12V 364 * GPIO 4 = INT_DEM 365 * GPIO 5 = INT_LNB 366 * GPIO 6 = #RESET_DEM 367 * GPIO 7 = P07_LED (green LED) 368 */ 369 static struct em28xx_reg_seq pctv_461e[] = { 370 {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 0}, 371 {0x0d, 0xff, 0xff, 0}, 372 {EM2874_R80_GPIO_P0_CTRL, 0x3f, 0xff, 100}, /* reset demod */ 373 {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 200}, /* reset demod */ 374 {0x0d, 0x42, 0xff, 0}, 375 {EM2874_R80_GPIO_P0_CTRL, 0xeb, 0xff, 0}, 376 {EM2874_R5F_TS_ENABLE, 0x84, 0x84, 0}, /* parallel? | null discard */ 377 { -1, -1, -1, -1}, 378 }; 379 380 #if 0 381 static struct em28xx_reg_seq hauppauge_930c_gpio[] = { 382 {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10}, 383 {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, /* xc5000 reset */ 384 {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10}, 385 {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, 386 { -1, -1, -1, -1}, 387 }; 388 389 static struct em28xx_reg_seq hauppauge_930c_digital[] = { 390 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10}, 391 {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, 392 {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10}, 393 { -1, -1, -1, -1}, 394 }; 395 #endif 396 397 /* 1b80:e425 MaxMedia UB425-TC 398 * 1b80:e1cc Delock 61959 399 * GPIO_6 - demod reset, 0=active 400 * GPIO_7 - LED, 0=active 401 */ 402 static struct em28xx_reg_seq maxmedia_ub425_tc[] = { 403 {EM2874_R80_GPIO_P0_CTRL, 0x83, 0xff, 100}, 404 {EM2874_R80_GPIO_P0_CTRL, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */ 405 {EM2874_R80_GPIO_P0_CTRL, 0x43, 0xff, 000}, /* GPIO_7 = 0 */ 406 { -1, -1, -1, -1}, 407 }; 408 409 /* 2304:0242 PCTV QuatroStick (510e) 410 * GPIO_2: decoder reset, 0=active 411 * GPIO_4: decoder suspend, 0=active 412 * GPIO_6: demod reset, 0=active 413 * GPIO_7: LED, 1=active 414 */ 415 static struct em28xx_reg_seq pctv_510e[] = { 416 {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100}, 417 {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ 418 {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ 419 { -1, -1, -1, -1}, 420 }; 421 422 /* 2013:0251 PCTV QuatroStick nano (520e) 423 * GPIO_2: decoder reset, 0=active 424 * GPIO_4: decoder suspend, 0=active 425 * GPIO_6: demod reset, 0=active 426 * GPIO_7: LED, 1=active 427 */ 428 static struct em28xx_reg_seq pctv_520e[] = { 429 {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100}, 430 {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ 431 {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ 432 {EM2874_R80_GPIO_P0_CTRL, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */ 433 { -1, -1, -1, -1}, 434 }; 435 436 /* 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam 437 * reg 0x80/0x84: 438 * GPIO_0: capturing LED, 0=on, 1=off 439 * GPIO_2: AV mute button, 0=pressed, 1=unpressed 440 * GPIO 3: illumination button, 0=pressed, 1=unpressed 441 * GPIO_6: illumination/flash LED, 0=on, 1=off 442 * reg 0x81/0x85: 443 * GPIO_7: snapshot button, 0=pressed, 1=unpressed 444 */ 445 static struct em28xx_reg_seq speedlink_vad_laplace_reg_seq[] = { 446 {EM2820_R08_GPIO_CTRL, 0xf7, 0xff, 10}, 447 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xb2, 10}, 448 { -1, -1, -1, -1}, 449 }; 450 451 /* 452 * Button definitions 453 */ 454 static struct em28xx_button std_snapshot_button[] = { 455 { 456 .role = EM28XX_BUTTON_SNAPSHOT, 457 .reg_r = EM28XX_R0C_USBSUSP, 458 .reg_clearing = EM28XX_R0C_USBSUSP, 459 .mask = EM28XX_R0C_USBSUSP_SNAPSHOT, 460 .inverted = 0, 461 }, 462 {-1, 0, 0, 0, 0}, 463 }; 464 465 static struct em28xx_button speedlink_vad_laplace_buttons[] = { 466 { 467 .role = EM28XX_BUTTON_SNAPSHOT, 468 .reg_r = EM2874_R85_GPIO_P1_STATE, 469 .mask = 0x80, 470 .inverted = 1, 471 }, 472 { 473 .role = EM28XX_BUTTON_ILLUMINATION, 474 .reg_r = EM2874_R84_GPIO_P0_STATE, 475 .mask = 0x08, 476 .inverted = 1, 477 }, 478 {-1, 0, 0, 0, 0}, 479 }; 480 481 /* 482 * LED definitions 483 */ 484 static struct em28xx_led speedlink_vad_laplace_leds[] = { 485 { 486 .role = EM28XX_LED_ANALOG_CAPTURING, 487 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 488 .gpio_mask = 0x01, 489 .inverted = 1, 490 }, 491 { 492 .role = EM28XX_LED_ILLUMINATION, 493 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 494 .gpio_mask = 0x40, 495 .inverted = 1, 496 }, 497 {-1, 0, 0, 0}, 498 }; 499 500 /* 501 * Board definitions 502 */ 503 struct em28xx_board em28xx_boards[] = { 504 [EM2750_BOARD_UNKNOWN] = { 505 .name = "EM2710/EM2750/EM2751 webcam grabber", 506 .xclk = EM28XX_XCLK_FREQUENCY_20MHZ, 507 .tuner_type = TUNER_ABSENT, 508 .is_webcam = 1, 509 .input = { { 510 .type = EM28XX_VMUX_COMPOSITE1, 511 .vmux = 0, 512 .amux = EM28XX_AMUX_VIDEO, 513 .gpio = silvercrest_reg_seq, 514 } }, 515 }, 516 [EM2800_BOARD_UNKNOWN] = { 517 .name = "Unknown EM2800 video grabber", 518 .is_em2800 = 1, 519 .tda9887_conf = TDA9887_PRESENT, 520 .decoder = EM28XX_SAA711X, 521 .tuner_type = TUNER_ABSENT, 522 .input = { { 523 .type = EM28XX_VMUX_COMPOSITE1, 524 .vmux = SAA7115_COMPOSITE0, 525 .amux = EM28XX_AMUX_LINE_IN, 526 }, { 527 .type = EM28XX_VMUX_SVIDEO, 528 .vmux = SAA7115_SVIDEO3, 529 .amux = EM28XX_AMUX_LINE_IN, 530 } }, 531 }, 532 [EM2820_BOARD_UNKNOWN] = { 533 .name = "Unknown EM2750/28xx video grabber", 534 .tuner_type = TUNER_ABSENT, 535 .is_webcam = 1, /* To enable sensor probe */ 536 }, 537 [EM2750_BOARD_DLCW_130] = { 538 /* Beijing Huaqi Information Digital Technology Co., Ltd */ 539 .name = "Huaqi DLCW-130", 540 .valid = EM28XX_BOARD_NOT_VALIDATED, 541 .xclk = EM28XX_XCLK_FREQUENCY_48MHZ, 542 .tuner_type = TUNER_ABSENT, 543 .is_webcam = 1, 544 .input = { { 545 .type = EM28XX_VMUX_COMPOSITE1, 546 .vmux = 0, 547 .amux = EM28XX_AMUX_VIDEO, 548 } }, 549 }, 550 [EM2820_BOARD_KWORLD_PVRTV2800RF] = { 551 .name = "Kworld PVR TV 2800 RF", 552 .tuner_type = TUNER_TEMIC_PAL, 553 .tda9887_conf = TDA9887_PRESENT, 554 .decoder = EM28XX_SAA711X, 555 .input = { { 556 .type = EM28XX_VMUX_COMPOSITE1, 557 .vmux = SAA7115_COMPOSITE0, 558 .amux = EM28XX_AMUX_LINE_IN, 559 }, { 560 .type = EM28XX_VMUX_SVIDEO, 561 .vmux = SAA7115_SVIDEO3, 562 .amux = EM28XX_AMUX_LINE_IN, 563 } }, 564 }, 565 [EM2820_BOARD_GADMEI_TVR200] = { 566 .name = "Gadmei TVR200", 567 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 568 .tda9887_conf = TDA9887_PRESENT, 569 .decoder = EM28XX_SAA711X, 570 .input = { { 571 .type = EM28XX_VMUX_TELEVISION, 572 .vmux = SAA7115_COMPOSITE2, 573 .amux = EM28XX_AMUX_LINE_IN, 574 }, { 575 .type = EM28XX_VMUX_COMPOSITE1, 576 .vmux = SAA7115_COMPOSITE0, 577 .amux = EM28XX_AMUX_LINE_IN, 578 }, { 579 .type = EM28XX_VMUX_SVIDEO, 580 .vmux = SAA7115_SVIDEO3, 581 .amux = EM28XX_AMUX_LINE_IN, 582 } }, 583 }, 584 [EM2820_BOARD_TERRATEC_CINERGY_250] = { 585 .name = "Terratec Cinergy 250 USB", 586 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 587 .has_ir_i2c = 1, 588 .tda9887_conf = TDA9887_PRESENT, 589 .decoder = EM28XX_SAA711X, 590 .input = { { 591 .type = EM28XX_VMUX_TELEVISION, 592 .vmux = SAA7115_COMPOSITE2, 593 .amux = EM28XX_AMUX_VIDEO, 594 }, { 595 .type = EM28XX_VMUX_COMPOSITE1, 596 .vmux = SAA7115_COMPOSITE0, 597 .amux = EM28XX_AMUX_LINE_IN, 598 }, { 599 .type = EM28XX_VMUX_SVIDEO, 600 .vmux = SAA7115_SVIDEO3, 601 .amux = EM28XX_AMUX_LINE_IN, 602 } }, 603 }, 604 [EM2820_BOARD_PINNACLE_USB_2] = { 605 .name = "Pinnacle PCTV USB 2", 606 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 607 .has_ir_i2c = 1, 608 .tda9887_conf = TDA9887_PRESENT, 609 .decoder = EM28XX_SAA711X, 610 .input = { { 611 .type = EM28XX_VMUX_TELEVISION, 612 .vmux = SAA7115_COMPOSITE2, 613 .amux = EM28XX_AMUX_VIDEO, 614 }, { 615 .type = EM28XX_VMUX_COMPOSITE1, 616 .vmux = SAA7115_COMPOSITE0, 617 .amux = EM28XX_AMUX_LINE_IN, 618 }, { 619 .type = EM28XX_VMUX_SVIDEO, 620 .vmux = SAA7115_SVIDEO3, 621 .amux = EM28XX_AMUX_LINE_IN, 622 } }, 623 }, 624 [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = { 625 .name = "Hauppauge WinTV USB 2", 626 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 627 .tda9887_conf = TDA9887_PRESENT | 628 TDA9887_PORT1_ACTIVE | 629 TDA9887_PORT2_ACTIVE, 630 .decoder = EM28XX_TVP5150, 631 .has_msp34xx = 1, 632 .has_ir_i2c = 1, 633 .input = { { 634 .type = EM28XX_VMUX_TELEVISION, 635 .vmux = TVP5150_COMPOSITE0, 636 .amux = MSP_INPUT_DEFAULT, 637 }, { 638 .type = EM28XX_VMUX_SVIDEO, 639 .vmux = TVP5150_SVIDEO, 640 .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1, 641 MSP_DSP_IN_SCART, MSP_DSP_IN_SCART), 642 } }, 643 }, 644 [EM2820_BOARD_DLINK_USB_TV] = { 645 .name = "D-Link DUB-T210 TV Tuner", 646 .valid = EM28XX_BOARD_NOT_VALIDATED, 647 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 648 .tda9887_conf = TDA9887_PRESENT, 649 .decoder = EM28XX_SAA711X, 650 .input = { { 651 .type = EM28XX_VMUX_TELEVISION, 652 .vmux = SAA7115_COMPOSITE2, 653 .amux = EM28XX_AMUX_LINE_IN, 654 }, { 655 .type = EM28XX_VMUX_COMPOSITE1, 656 .vmux = SAA7115_COMPOSITE0, 657 .amux = EM28XX_AMUX_LINE_IN, 658 }, { 659 .type = EM28XX_VMUX_SVIDEO, 660 .vmux = SAA7115_SVIDEO3, 661 .amux = EM28XX_AMUX_LINE_IN, 662 } }, 663 }, 664 [EM2820_BOARD_HERCULES_SMART_TV_USB2] = { 665 .name = "Hercules Smart TV USB 2.0", 666 .valid = EM28XX_BOARD_NOT_VALIDATED, 667 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 668 .tda9887_conf = TDA9887_PRESENT, 669 .decoder = EM28XX_SAA711X, 670 .input = { { 671 .type = EM28XX_VMUX_TELEVISION, 672 .vmux = SAA7115_COMPOSITE2, 673 .amux = EM28XX_AMUX_LINE_IN, 674 }, { 675 .type = EM28XX_VMUX_COMPOSITE1, 676 .vmux = SAA7115_COMPOSITE0, 677 .amux = EM28XX_AMUX_LINE_IN, 678 }, { 679 .type = EM28XX_VMUX_SVIDEO, 680 .vmux = SAA7115_SVIDEO3, 681 .amux = EM28XX_AMUX_LINE_IN, 682 } }, 683 }, 684 [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = { 685 .name = "Pinnacle PCTV USB 2 (Philips FM1216ME)", 686 .valid = EM28XX_BOARD_NOT_VALIDATED, 687 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, 688 .tda9887_conf = TDA9887_PRESENT, 689 .decoder = EM28XX_SAA711X, 690 .input = { { 691 .type = EM28XX_VMUX_TELEVISION, 692 .vmux = SAA7115_COMPOSITE2, 693 .amux = EM28XX_AMUX_VIDEO, 694 }, { 695 .type = EM28XX_VMUX_COMPOSITE1, 696 .vmux = SAA7115_COMPOSITE0, 697 .amux = EM28XX_AMUX_LINE_IN, 698 }, { 699 .type = EM28XX_VMUX_SVIDEO, 700 .vmux = SAA7115_SVIDEO3, 701 .amux = EM28XX_AMUX_LINE_IN, 702 } }, 703 }, 704 [EM2820_BOARD_GADMEI_UTV310] = { 705 .name = "Gadmei UTV310", 706 .valid = EM28XX_BOARD_NOT_VALIDATED, 707 .tuner_type = TUNER_TNF_5335MF, 708 .tda9887_conf = TDA9887_PRESENT, 709 .decoder = EM28XX_SAA711X, 710 .input = { { 711 .type = EM28XX_VMUX_TELEVISION, 712 .vmux = SAA7115_COMPOSITE1, 713 .amux = EM28XX_AMUX_LINE_IN, 714 }, { 715 .type = EM28XX_VMUX_COMPOSITE1, 716 .vmux = SAA7115_COMPOSITE0, 717 .amux = EM28XX_AMUX_LINE_IN, 718 }, { 719 .type = EM28XX_VMUX_SVIDEO, 720 .vmux = SAA7115_SVIDEO3, 721 .amux = EM28XX_AMUX_LINE_IN, 722 } }, 723 }, 724 [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = { 725 .name = "Leadtek Winfast USB II Deluxe", 726 .valid = EM28XX_BOARD_NOT_VALIDATED, 727 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, 728 .has_ir_i2c = 1, 729 .tvaudio_addr = 0x58, 730 .tda9887_conf = TDA9887_PRESENT | 731 TDA9887_PORT2_ACTIVE | 732 TDA9887_QSS, 733 .decoder = EM28XX_SAA711X, 734 .adecoder = EM28XX_TVAUDIO, 735 .input = { { 736 .type = EM28XX_VMUX_TELEVISION, 737 .vmux = SAA7115_COMPOSITE4, 738 .amux = EM28XX_AMUX_AUX, 739 }, { 740 .type = EM28XX_VMUX_COMPOSITE1, 741 .vmux = SAA7115_COMPOSITE5, 742 .amux = EM28XX_AMUX_LINE_IN, 743 }, { 744 .type = EM28XX_VMUX_SVIDEO, 745 .vmux = SAA7115_SVIDEO3, 746 .amux = EM28XX_AMUX_LINE_IN, 747 } }, 748 .radio = { 749 .type = EM28XX_RADIO, 750 .amux = EM28XX_AMUX_AUX, 751 } 752 }, 753 [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = { 754 .name = "Videology 20K14XUSB USB2.0", 755 .valid = EM28XX_BOARD_NOT_VALIDATED, 756 .tuner_type = TUNER_ABSENT, 757 .is_webcam = 1, 758 .input = { { 759 .type = EM28XX_VMUX_COMPOSITE1, 760 .vmux = 0, 761 .amux = EM28XX_AMUX_VIDEO, 762 } }, 763 }, 764 [EM2820_BOARD_SILVERCREST_WEBCAM] = { 765 .name = "Silvercrest Webcam 1.3mpix", 766 .tuner_type = TUNER_ABSENT, 767 .is_webcam = 1, 768 .input = { { 769 .type = EM28XX_VMUX_COMPOSITE1, 770 .vmux = 0, 771 .amux = EM28XX_AMUX_VIDEO, 772 .gpio = silvercrest_reg_seq, 773 } }, 774 }, 775 [EM2821_BOARD_SUPERCOMP_USB_2] = { 776 .name = "Supercomp USB 2.0 TV", 777 .valid = EM28XX_BOARD_NOT_VALIDATED, 778 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 779 .tda9887_conf = TDA9887_PRESENT | 780 TDA9887_PORT1_ACTIVE | 781 TDA9887_PORT2_ACTIVE, 782 .decoder = EM28XX_SAA711X, 783 .input = { { 784 .type = EM28XX_VMUX_TELEVISION, 785 .vmux = SAA7115_COMPOSITE2, 786 .amux = EM28XX_AMUX_LINE_IN, 787 }, { 788 .type = EM28XX_VMUX_COMPOSITE1, 789 .vmux = SAA7115_COMPOSITE0, 790 .amux = EM28XX_AMUX_VIDEO, 791 }, { 792 .type = EM28XX_VMUX_SVIDEO, 793 .vmux = SAA7115_SVIDEO3, 794 .amux = EM28XX_AMUX_LINE_IN, 795 } }, 796 }, 797 [EM2821_BOARD_USBGEAR_VD204] = { 798 .name = "Usbgear VD204v9", 799 .valid = EM28XX_BOARD_NOT_VALIDATED, 800 .tuner_type = TUNER_ABSENT, /* Capture only device */ 801 .decoder = EM28XX_SAA711X, 802 .input = { { 803 .type = EM28XX_VMUX_COMPOSITE1, 804 .vmux = SAA7115_COMPOSITE0, 805 .amux = EM28XX_AMUX_LINE_IN, 806 }, { 807 .type = EM28XX_VMUX_SVIDEO, 808 .vmux = SAA7115_SVIDEO3, 809 .amux = EM28XX_AMUX_LINE_IN, 810 } }, 811 }, 812 [EM2860_BOARD_NETGMBH_CAM] = { 813 /* Beijing Huaqi Information Digital Technology Co., Ltd */ 814 .name = "NetGMBH Cam", 815 .valid = EM28XX_BOARD_NOT_VALIDATED, 816 .tuner_type = TUNER_ABSENT, 817 .is_webcam = 1, 818 .input = { { 819 .type = EM28XX_VMUX_COMPOSITE1, 820 .vmux = 0, 821 .amux = EM28XX_AMUX_VIDEO, 822 } }, 823 }, 824 [EM2860_BOARD_TYPHOON_DVD_MAKER] = { 825 .name = "Typhoon DVD Maker", 826 .decoder = EM28XX_SAA711X, 827 .tuner_type = TUNER_ABSENT, /* Capture only device */ 828 .input = { { 829 .type = EM28XX_VMUX_COMPOSITE1, 830 .vmux = SAA7115_COMPOSITE0, 831 .amux = EM28XX_AMUX_LINE_IN, 832 }, { 833 .type = EM28XX_VMUX_SVIDEO, 834 .vmux = SAA7115_SVIDEO3, 835 .amux = EM28XX_AMUX_LINE_IN, 836 } }, 837 }, 838 [EM2860_BOARD_GADMEI_UTV330] = { 839 .name = "Gadmei UTV330", 840 .valid = EM28XX_BOARD_NOT_VALIDATED, 841 .tuner_type = TUNER_TNF_5335MF, 842 .tda9887_conf = TDA9887_PRESENT, 843 .decoder = EM28XX_SAA711X, 844 .input = { { 845 .type = EM28XX_VMUX_TELEVISION, 846 .vmux = SAA7115_COMPOSITE2, 847 .amux = EM28XX_AMUX_VIDEO, 848 }, { 849 .type = EM28XX_VMUX_COMPOSITE1, 850 .vmux = SAA7115_COMPOSITE0, 851 .amux = EM28XX_AMUX_LINE_IN, 852 }, { 853 .type = EM28XX_VMUX_SVIDEO, 854 .vmux = SAA7115_SVIDEO3, 855 .amux = EM28XX_AMUX_LINE_IN, 856 } }, 857 }, 858 [EM2861_BOARD_GADMEI_UTV330PLUS] = { 859 .name = "Gadmei UTV330+", 860 .tuner_type = TUNER_TNF_5335MF, 861 .tda9887_conf = TDA9887_PRESENT, 862 .ir_codes = RC_MAP_GADMEI_RM008Z, 863 .decoder = EM28XX_SAA711X, 864 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 865 .input = { { 866 .type = EM28XX_VMUX_TELEVISION, 867 .vmux = SAA7115_COMPOSITE2, 868 .amux = EM28XX_AMUX_VIDEO, 869 }, { 870 .type = EM28XX_VMUX_COMPOSITE1, 871 .vmux = SAA7115_COMPOSITE0, 872 .amux = EM28XX_AMUX_LINE_IN, 873 }, { 874 .type = EM28XX_VMUX_SVIDEO, 875 .vmux = SAA7115_SVIDEO3, 876 .amux = EM28XX_AMUX_LINE_IN, 877 } }, 878 }, 879 [EM2860_BOARD_TERRATEC_HYBRID_XS] = { 880 .name = "Terratec Cinergy A Hybrid XS", 881 .valid = EM28XX_BOARD_NOT_VALIDATED, 882 .tuner_type = TUNER_XC2028, 883 .tuner_gpio = default_tuner_gpio, 884 .decoder = EM28XX_TVP5150, 885 886 .input = { { 887 .type = EM28XX_VMUX_TELEVISION, 888 .vmux = TVP5150_COMPOSITE0, 889 .amux = EM28XX_AMUX_VIDEO, 890 .gpio = hauppauge_wintv_hvr_900_analog, 891 }, { 892 .type = EM28XX_VMUX_COMPOSITE1, 893 .vmux = TVP5150_COMPOSITE1, 894 .amux = EM28XX_AMUX_LINE_IN, 895 .gpio = hauppauge_wintv_hvr_900_analog, 896 }, { 897 .type = EM28XX_VMUX_SVIDEO, 898 .vmux = TVP5150_SVIDEO, 899 .amux = EM28XX_AMUX_LINE_IN, 900 .gpio = hauppauge_wintv_hvr_900_analog, 901 } }, 902 }, 903 [EM2861_BOARD_KWORLD_PVRTV_300U] = { 904 .name = "KWorld PVRTV 300U", 905 .valid = EM28XX_BOARD_NOT_VALIDATED, 906 .tuner_type = TUNER_XC2028, 907 .tuner_gpio = default_tuner_gpio, 908 .decoder = EM28XX_TVP5150, 909 .input = { { 910 .type = EM28XX_VMUX_TELEVISION, 911 .vmux = TVP5150_COMPOSITE0, 912 .amux = EM28XX_AMUX_VIDEO, 913 }, { 914 .type = EM28XX_VMUX_COMPOSITE1, 915 .vmux = TVP5150_COMPOSITE1, 916 .amux = EM28XX_AMUX_LINE_IN, 917 }, { 918 .type = EM28XX_VMUX_SVIDEO, 919 .vmux = TVP5150_SVIDEO, 920 .amux = EM28XX_AMUX_LINE_IN, 921 } }, 922 }, 923 [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = { 924 .name = "Yakumo MovieMixer", 925 .tuner_type = TUNER_ABSENT, /* Capture only device */ 926 .decoder = EM28XX_TVP5150, 927 .input = { { 928 .type = EM28XX_VMUX_TELEVISION, 929 .vmux = TVP5150_COMPOSITE0, 930 .amux = EM28XX_AMUX_VIDEO, 931 }, { 932 .type = EM28XX_VMUX_COMPOSITE1, 933 .vmux = TVP5150_COMPOSITE1, 934 .amux = EM28XX_AMUX_LINE_IN, 935 }, { 936 .type = EM28XX_VMUX_SVIDEO, 937 .vmux = TVP5150_SVIDEO, 938 .amux = EM28XX_AMUX_LINE_IN, 939 } }, 940 }, 941 [EM2860_BOARD_TVP5150_REFERENCE_DESIGN] = { 942 .name = "EM2860/TVP5150 Reference Design", 943 .tuner_type = TUNER_ABSENT, /* Capture only device */ 944 .decoder = EM28XX_TVP5150, 945 .input = { { 946 .type = EM28XX_VMUX_COMPOSITE1, 947 .vmux = TVP5150_COMPOSITE1, 948 .amux = EM28XX_AMUX_LINE_IN, 949 }, { 950 .type = EM28XX_VMUX_SVIDEO, 951 .vmux = TVP5150_SVIDEO, 952 .amux = EM28XX_AMUX_LINE_IN, 953 } }, 954 }, 955 [EM2861_BOARD_PLEXTOR_PX_TV100U] = { 956 .name = "Plextor ConvertX PX-TV100U", 957 .tuner_type = TUNER_TNF_5335MF, 958 .xclk = EM28XX_XCLK_I2S_MSB_TIMING | 959 EM28XX_XCLK_FREQUENCY_12MHZ, 960 .tda9887_conf = TDA9887_PRESENT, 961 .decoder = EM28XX_TVP5150, 962 .has_msp34xx = 1, 963 .input = { { 964 .type = EM28XX_VMUX_TELEVISION, 965 .vmux = TVP5150_COMPOSITE0, 966 .amux = EM28XX_AMUX_LINE_IN, 967 .gpio = pinnacle_hybrid_pro_analog, 968 }, { 969 .type = EM28XX_VMUX_COMPOSITE1, 970 .vmux = TVP5150_COMPOSITE1, 971 .amux = EM28XX_AMUX_LINE_IN, 972 .gpio = pinnacle_hybrid_pro_analog, 973 }, { 974 .type = EM28XX_VMUX_SVIDEO, 975 .vmux = TVP5150_SVIDEO, 976 .amux = EM28XX_AMUX_LINE_IN, 977 .gpio = pinnacle_hybrid_pro_analog, 978 } }, 979 }, 980 981 /* Those boards with em2870 are DVB Only*/ 982 983 [EM2870_BOARD_TERRATEC_XS] = { 984 .name = "Terratec Cinergy T XS", 985 .valid = EM28XX_BOARD_NOT_VALIDATED, 986 .tuner_type = TUNER_XC2028, 987 .tuner_gpio = default_tuner_gpio, 988 }, 989 [EM2870_BOARD_TERRATEC_XS_MT2060] = { 990 .name = "Terratec Cinergy T XS (MT2060)", 991 .valid = EM28XX_BOARD_NOT_VALIDATED, 992 .tuner_type = TUNER_ABSENT, /* MT2060 */ 993 }, 994 [EM2870_BOARD_KWORLD_350U] = { 995 .name = "Kworld 350 U DVB-T", 996 .valid = EM28XX_BOARD_NOT_VALIDATED, 997 .tuner_type = TUNER_XC2028, 998 .tuner_gpio = default_tuner_gpio, 999 }, 1000 [EM2870_BOARD_KWORLD_355U] = { 1001 .name = "Kworld 355 U DVB-T", 1002 .valid = EM28XX_BOARD_NOT_VALIDATED, 1003 .tuner_type = TUNER_ABSENT, 1004 .tuner_gpio = default_tuner_gpio, 1005 .has_dvb = 1, 1006 .dvb_gpio = default_digital, 1007 }, 1008 [EM2870_BOARD_PINNACLE_PCTV_DVB] = { 1009 .name = "Pinnacle PCTV DVB-T", 1010 .valid = EM28XX_BOARD_NOT_VALIDATED, 1011 .tuner_type = TUNER_ABSENT, /* MT2060 */ 1012 /* djh - I have serious doubts this is right... */ 1013 .xclk = EM28XX_XCLK_IR_RC5_MODE | 1014 EM28XX_XCLK_FREQUENCY_10MHZ, 1015 }, 1016 [EM2870_BOARD_COMPRO_VIDEOMATE] = { 1017 .name = "Compro, VideoMate U3", 1018 .valid = EM28XX_BOARD_NOT_VALIDATED, 1019 .tuner_type = TUNER_ABSENT, /* MT2060 */ 1020 }, 1021 1022 [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = { 1023 .name = "Terratec Hybrid XS Secam", 1024 .has_msp34xx = 1, 1025 .tuner_type = TUNER_XC2028, 1026 .tuner_gpio = default_tuner_gpio, 1027 .decoder = EM28XX_TVP5150, 1028 .has_dvb = 1, 1029 .dvb_gpio = terratec_cinergy_USB_XS_FR_digital, 1030 .input = { { 1031 .type = EM28XX_VMUX_TELEVISION, 1032 .vmux = TVP5150_COMPOSITE0, 1033 .amux = EM28XX_AMUX_VIDEO, 1034 .gpio = terratec_cinergy_USB_XS_FR_analog, 1035 }, { 1036 .type = EM28XX_VMUX_COMPOSITE1, 1037 .vmux = TVP5150_COMPOSITE1, 1038 .amux = EM28XX_AMUX_LINE_IN, 1039 .gpio = terratec_cinergy_USB_XS_FR_analog, 1040 }, { 1041 .type = EM28XX_VMUX_SVIDEO, 1042 .vmux = TVP5150_SVIDEO, 1043 .amux = EM28XX_AMUX_LINE_IN, 1044 .gpio = terratec_cinergy_USB_XS_FR_analog, 1045 } }, 1046 }, 1047 [EM2884_BOARD_TERRATEC_H5] = { 1048 .name = "Terratec Cinergy H5", 1049 .has_dvb = 1, 1050 #if 0 1051 .tuner_type = TUNER_PHILIPS_TDA8290, 1052 .tuner_addr = 0x41, 1053 .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */ 1054 .tuner_gpio = terratec_h5_gpio, 1055 #else 1056 .tuner_type = TUNER_ABSENT, 1057 #endif 1058 .def_i2c_bus = 1, 1059 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1060 EM28XX_I2C_FREQ_400_KHZ, 1061 }, 1062 [EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = { 1063 .name = "Hauppauge WinTV HVR 930C", 1064 .has_dvb = 1, 1065 #if 0 /* FIXME: Add analog support */ 1066 .tuner_type = TUNER_XC5000, 1067 .tuner_addr = 0x41, 1068 .dvb_gpio = hauppauge_930c_digital, 1069 .tuner_gpio = hauppauge_930c_gpio, 1070 #else 1071 .tuner_type = TUNER_ABSENT, 1072 #endif 1073 .ir_codes = RC_MAP_HAUPPAUGE, 1074 .def_i2c_bus = 1, 1075 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1076 EM28XX_I2C_FREQ_400_KHZ, 1077 }, 1078 [EM2884_BOARD_C3TECH_DIGITAL_DUO] = { 1079 .name = "C3 Tech Digital Duo HDTV/SDTV USB", 1080 .has_dvb = 1, 1081 /* FIXME: Add analog support - need a saa7136 driver */ 1082 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */ 1083 .ir_codes = RC_MAP_EMPTY, 1084 .def_i2c_bus = 1, 1085 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 1086 .dvb_gpio = c3tech_digital_duo_digital, 1087 }, 1088 [EM2884_BOARD_CINERGY_HTC_STICK] = { 1089 .name = "Terratec Cinergy HTC Stick", 1090 .has_dvb = 1, 1091 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, 1092 .tuner_type = TUNER_ABSENT, 1093 .def_i2c_bus = 1, 1094 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1095 EM28XX_I2C_FREQ_400_KHZ, 1096 }, 1097 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = { 1098 .name = "Hauppauge WinTV HVR 900", 1099 .tda9887_conf = TDA9887_PRESENT, 1100 .tuner_type = TUNER_XC2028, 1101 .tuner_gpio = default_tuner_gpio, 1102 .mts_firmware = 1, 1103 .has_dvb = 1, 1104 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1105 .ir_codes = RC_MAP_HAUPPAUGE, 1106 .decoder = EM28XX_TVP5150, 1107 .input = { { 1108 .type = EM28XX_VMUX_TELEVISION, 1109 .vmux = TVP5150_COMPOSITE0, 1110 .amux = EM28XX_AMUX_VIDEO, 1111 .gpio = hauppauge_wintv_hvr_900_analog, 1112 }, { 1113 .type = EM28XX_VMUX_COMPOSITE1, 1114 .vmux = TVP5150_COMPOSITE1, 1115 .amux = EM28XX_AMUX_LINE_IN, 1116 .gpio = hauppauge_wintv_hvr_900_analog, 1117 }, { 1118 .type = EM28XX_VMUX_SVIDEO, 1119 .vmux = TVP5150_SVIDEO, 1120 .amux = EM28XX_AMUX_LINE_IN, 1121 .gpio = hauppauge_wintv_hvr_900_analog, 1122 } }, 1123 }, 1124 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = { 1125 .name = "Hauppauge WinTV HVR 900 (R2)", 1126 .tda9887_conf = TDA9887_PRESENT, 1127 .tuner_type = TUNER_XC2028, 1128 .tuner_gpio = default_tuner_gpio, 1129 .mts_firmware = 1, 1130 .has_dvb = 1, 1131 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, 1132 .ir_codes = RC_MAP_HAUPPAUGE, 1133 .decoder = EM28XX_TVP5150, 1134 .input = { { 1135 .type = EM28XX_VMUX_TELEVISION, 1136 .vmux = TVP5150_COMPOSITE0, 1137 .amux = EM28XX_AMUX_VIDEO, 1138 .gpio = hauppauge_wintv_hvr_900_analog, 1139 }, { 1140 .type = EM28XX_VMUX_COMPOSITE1, 1141 .vmux = TVP5150_COMPOSITE1, 1142 .amux = EM28XX_AMUX_LINE_IN, 1143 .gpio = hauppauge_wintv_hvr_900_analog, 1144 }, { 1145 .type = EM28XX_VMUX_SVIDEO, 1146 .vmux = TVP5150_SVIDEO, 1147 .amux = EM28XX_AMUX_LINE_IN, 1148 .gpio = hauppauge_wintv_hvr_900_analog, 1149 } }, 1150 }, 1151 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = { 1152 .name = "Hauppauge WinTV HVR 850", 1153 .tuner_type = TUNER_XC2028, 1154 .tuner_gpio = default_tuner_gpio, 1155 .mts_firmware = 1, 1156 .has_dvb = 1, 1157 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1158 .ir_codes = RC_MAP_HAUPPAUGE, 1159 .decoder = EM28XX_TVP5150, 1160 .input = { { 1161 .type = EM28XX_VMUX_TELEVISION, 1162 .vmux = TVP5150_COMPOSITE0, 1163 .amux = EM28XX_AMUX_VIDEO, 1164 .gpio = hauppauge_wintv_hvr_900_analog, 1165 }, { 1166 .type = EM28XX_VMUX_COMPOSITE1, 1167 .vmux = TVP5150_COMPOSITE1, 1168 .amux = EM28XX_AMUX_LINE_IN, 1169 .gpio = hauppauge_wintv_hvr_900_analog, 1170 }, { 1171 .type = EM28XX_VMUX_SVIDEO, 1172 .vmux = TVP5150_SVIDEO, 1173 .amux = EM28XX_AMUX_LINE_IN, 1174 .gpio = hauppauge_wintv_hvr_900_analog, 1175 } }, 1176 }, 1177 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = { 1178 .name = "Hauppauge WinTV HVR 950", 1179 .tuner_type = TUNER_XC2028, 1180 .tuner_gpio = default_tuner_gpio, 1181 .mts_firmware = 1, 1182 .has_dvb = 1, 1183 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1184 .ir_codes = RC_MAP_HAUPPAUGE, 1185 .decoder = EM28XX_TVP5150, 1186 .input = { { 1187 .type = EM28XX_VMUX_TELEVISION, 1188 .vmux = TVP5150_COMPOSITE0, 1189 .amux = EM28XX_AMUX_VIDEO, 1190 .gpio = hauppauge_wintv_hvr_900_analog, 1191 }, { 1192 .type = EM28XX_VMUX_COMPOSITE1, 1193 .vmux = TVP5150_COMPOSITE1, 1194 .amux = EM28XX_AMUX_LINE_IN, 1195 .gpio = hauppauge_wintv_hvr_900_analog, 1196 }, { 1197 .type = EM28XX_VMUX_SVIDEO, 1198 .vmux = TVP5150_SVIDEO, 1199 .amux = EM28XX_AMUX_LINE_IN, 1200 .gpio = hauppauge_wintv_hvr_900_analog, 1201 } }, 1202 }, 1203 [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = { 1204 .name = "Pinnacle PCTV HD Pro Stick", 1205 .tuner_type = TUNER_XC2028, 1206 .tuner_gpio = default_tuner_gpio, 1207 .mts_firmware = 1, 1208 .has_dvb = 1, 1209 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1210 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 1211 .decoder = EM28XX_TVP5150, 1212 .input = { { 1213 .type = EM28XX_VMUX_TELEVISION, 1214 .vmux = TVP5150_COMPOSITE0, 1215 .amux = EM28XX_AMUX_VIDEO, 1216 .gpio = hauppauge_wintv_hvr_900_analog, 1217 }, { 1218 .type = EM28XX_VMUX_COMPOSITE1, 1219 .vmux = TVP5150_COMPOSITE1, 1220 .amux = EM28XX_AMUX_LINE_IN, 1221 .gpio = hauppauge_wintv_hvr_900_analog, 1222 }, { 1223 .type = EM28XX_VMUX_SVIDEO, 1224 .vmux = TVP5150_SVIDEO, 1225 .amux = EM28XX_AMUX_LINE_IN, 1226 .gpio = hauppauge_wintv_hvr_900_analog, 1227 } }, 1228 }, 1229 [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = { 1230 .name = "AMD ATI TV Wonder HD 600", 1231 .tuner_type = TUNER_XC2028, 1232 .tuner_gpio = default_tuner_gpio, 1233 .mts_firmware = 1, 1234 .has_dvb = 1, 1235 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1236 .ir_codes = RC_MAP_ATI_TV_WONDER_HD_600, 1237 .decoder = EM28XX_TVP5150, 1238 .input = { { 1239 .type = EM28XX_VMUX_TELEVISION, 1240 .vmux = TVP5150_COMPOSITE0, 1241 .amux = EM28XX_AMUX_VIDEO, 1242 .gpio = hauppauge_wintv_hvr_900_analog, 1243 }, { 1244 .type = EM28XX_VMUX_COMPOSITE1, 1245 .vmux = TVP5150_COMPOSITE1, 1246 .amux = EM28XX_AMUX_LINE_IN, 1247 .gpio = hauppauge_wintv_hvr_900_analog, 1248 }, { 1249 .type = EM28XX_VMUX_SVIDEO, 1250 .vmux = TVP5150_SVIDEO, 1251 .amux = EM28XX_AMUX_LINE_IN, 1252 .gpio = hauppauge_wintv_hvr_900_analog, 1253 } }, 1254 }, 1255 [EM2880_BOARD_TERRATEC_HYBRID_XS] = { 1256 .name = "Terratec Hybrid XS", 1257 .tuner_type = TUNER_XC2028, 1258 .tuner_gpio = default_tuner_gpio, 1259 .decoder = EM28XX_TVP5150, 1260 .has_dvb = 1, 1261 .dvb_gpio = default_digital, 1262 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS, 1263 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 1264 .input = { { 1265 .type = EM28XX_VMUX_TELEVISION, 1266 .vmux = TVP5150_COMPOSITE0, 1267 .amux = EM28XX_AMUX_VIDEO, 1268 .gpio = default_analog, 1269 }, { 1270 .type = EM28XX_VMUX_COMPOSITE1, 1271 .vmux = TVP5150_COMPOSITE1, 1272 .amux = EM28XX_AMUX_LINE_IN, 1273 .gpio = default_analog, 1274 }, { 1275 .type = EM28XX_VMUX_SVIDEO, 1276 .vmux = TVP5150_SVIDEO, 1277 .amux = EM28XX_AMUX_LINE_IN, 1278 .gpio = default_analog, 1279 } }, 1280 }, 1281 /* maybe there's a reason behind it why Terratec sells the Hybrid XS 1282 as Prodigy XS with a different PID, let's keep it separated for now 1283 maybe we'll need it lateron */ 1284 [EM2880_BOARD_TERRATEC_PRODIGY_XS] = { 1285 .name = "Terratec Prodigy XS", 1286 .tuner_type = TUNER_XC2028, 1287 .tuner_gpio = default_tuner_gpio, 1288 .decoder = EM28XX_TVP5150, 1289 .input = { { 1290 .type = EM28XX_VMUX_TELEVISION, 1291 .vmux = TVP5150_COMPOSITE0, 1292 .amux = EM28XX_AMUX_VIDEO, 1293 .gpio = hauppauge_wintv_hvr_900_analog, 1294 }, { 1295 .type = EM28XX_VMUX_COMPOSITE1, 1296 .vmux = TVP5150_COMPOSITE1, 1297 .amux = EM28XX_AMUX_LINE_IN, 1298 .gpio = hauppauge_wintv_hvr_900_analog, 1299 }, { 1300 .type = EM28XX_VMUX_SVIDEO, 1301 .vmux = TVP5150_SVIDEO, 1302 .amux = EM28XX_AMUX_LINE_IN, 1303 .gpio = hauppauge_wintv_hvr_900_analog, 1304 } }, 1305 }, 1306 [EM2820_BOARD_MSI_VOX_USB_2] = { 1307 .name = "MSI VOX USB 2.0", 1308 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1309 .tda9887_conf = TDA9887_PRESENT | 1310 TDA9887_PORT1_ACTIVE | 1311 TDA9887_PORT2_ACTIVE, 1312 .max_range_640_480 = 1, 1313 .decoder = EM28XX_SAA711X, 1314 .input = { { 1315 .type = EM28XX_VMUX_TELEVISION, 1316 .vmux = SAA7115_COMPOSITE4, 1317 .amux = EM28XX_AMUX_VIDEO, 1318 }, { 1319 .type = EM28XX_VMUX_COMPOSITE1, 1320 .vmux = SAA7115_COMPOSITE0, 1321 .amux = EM28XX_AMUX_LINE_IN, 1322 }, { 1323 .type = EM28XX_VMUX_SVIDEO, 1324 .vmux = SAA7115_SVIDEO3, 1325 .amux = EM28XX_AMUX_LINE_IN, 1326 } }, 1327 }, 1328 [EM2800_BOARD_TERRATEC_CINERGY_200] = { 1329 .name = "Terratec Cinergy 200 USB", 1330 .is_em2800 = 1, 1331 .has_ir_i2c = 1, 1332 .tuner_type = TUNER_LG_TALN, 1333 .tda9887_conf = TDA9887_PRESENT, 1334 .decoder = EM28XX_SAA711X, 1335 .input = { { 1336 .type = EM28XX_VMUX_TELEVISION, 1337 .vmux = SAA7115_COMPOSITE2, 1338 .amux = EM28XX_AMUX_VIDEO, 1339 }, { 1340 .type = EM28XX_VMUX_COMPOSITE1, 1341 .vmux = SAA7115_COMPOSITE0, 1342 .amux = EM28XX_AMUX_LINE_IN, 1343 }, { 1344 .type = EM28XX_VMUX_SVIDEO, 1345 .vmux = SAA7115_SVIDEO3, 1346 .amux = EM28XX_AMUX_LINE_IN, 1347 } }, 1348 }, 1349 [EM2800_BOARD_GRABBEEX_USB2800] = { 1350 .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder", 1351 .is_em2800 = 1, 1352 .decoder = EM28XX_SAA711X, 1353 .tuner_type = TUNER_ABSENT, /* capture only board */ 1354 .input = { { 1355 .type = EM28XX_VMUX_COMPOSITE1, 1356 .vmux = SAA7115_COMPOSITE0, 1357 .amux = EM28XX_AMUX_LINE_IN, 1358 }, { 1359 .type = EM28XX_VMUX_SVIDEO, 1360 .vmux = SAA7115_SVIDEO3, 1361 .amux = EM28XX_AMUX_LINE_IN, 1362 } }, 1363 }, 1364 [EM2800_BOARD_VC211A] = { 1365 .name = "Actionmaster/LinXcel/Digitus VC211A", 1366 .is_em2800 = 1, 1367 .tuner_type = TUNER_ABSENT, /* Capture-only board */ 1368 .decoder = EM28XX_SAA711X, 1369 .input = { { 1370 .type = EM28XX_VMUX_COMPOSITE1, 1371 .vmux = SAA7115_COMPOSITE0, 1372 .amux = EM28XX_AMUX_LINE_IN, 1373 .gpio = vc211a_enable, 1374 }, { 1375 .type = EM28XX_VMUX_SVIDEO, 1376 .vmux = SAA7115_SVIDEO3, 1377 .amux = EM28XX_AMUX_LINE_IN, 1378 .gpio = vc211a_enable, 1379 } }, 1380 }, 1381 [EM2800_BOARD_LEADTEK_WINFAST_USBII] = { 1382 .name = "Leadtek Winfast USB II", 1383 .is_em2800 = 1, 1384 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1385 .tda9887_conf = TDA9887_PRESENT, 1386 .decoder = EM28XX_SAA711X, 1387 .input = { { 1388 .type = EM28XX_VMUX_TELEVISION, 1389 .vmux = SAA7115_COMPOSITE2, 1390 .amux = EM28XX_AMUX_VIDEO, 1391 }, { 1392 .type = EM28XX_VMUX_COMPOSITE1, 1393 .vmux = SAA7115_COMPOSITE0, 1394 .amux = EM28XX_AMUX_LINE_IN, 1395 }, { 1396 .type = EM28XX_VMUX_SVIDEO, 1397 .vmux = SAA7115_SVIDEO3, 1398 .amux = EM28XX_AMUX_LINE_IN, 1399 } }, 1400 }, 1401 [EM2800_BOARD_KWORLD_USB2800] = { 1402 .name = "Kworld USB2800", 1403 .is_em2800 = 1, 1404 .tuner_type = TUNER_PHILIPS_FCV1236D, 1405 .tda9887_conf = TDA9887_PRESENT, 1406 .decoder = EM28XX_SAA711X, 1407 .input = { { 1408 .type = EM28XX_VMUX_TELEVISION, 1409 .vmux = SAA7115_COMPOSITE2, 1410 .amux = EM28XX_AMUX_VIDEO, 1411 }, { 1412 .type = EM28XX_VMUX_COMPOSITE1, 1413 .vmux = SAA7115_COMPOSITE0, 1414 .amux = EM28XX_AMUX_LINE_IN, 1415 }, { 1416 .type = EM28XX_VMUX_SVIDEO, 1417 .vmux = SAA7115_SVIDEO3, 1418 .amux = EM28XX_AMUX_LINE_IN, 1419 } }, 1420 }, 1421 [EM2820_BOARD_PINNACLE_DVC_90] = { 1422 .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker " 1423 "/ Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U", 1424 .tuner_type = TUNER_ABSENT, /* capture only board */ 1425 .decoder = EM28XX_SAA711X, 1426 .input = { { 1427 .type = EM28XX_VMUX_COMPOSITE1, 1428 .vmux = SAA7115_COMPOSITE0, 1429 .amux = EM28XX_AMUX_LINE_IN, 1430 }, { 1431 .type = EM28XX_VMUX_SVIDEO, 1432 .vmux = SAA7115_SVIDEO3, 1433 .amux = EM28XX_AMUX_LINE_IN, 1434 } }, 1435 }, 1436 [EM2800_BOARD_VGEAR_POCKETTV] = { 1437 .name = "V-Gear PocketTV", 1438 .is_em2800 = 1, 1439 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1440 .tda9887_conf = TDA9887_PRESENT, 1441 .decoder = EM28XX_SAA711X, 1442 .input = { { 1443 .type = EM28XX_VMUX_TELEVISION, 1444 .vmux = SAA7115_COMPOSITE2, 1445 .amux = EM28XX_AMUX_VIDEO, 1446 }, { 1447 .type = EM28XX_VMUX_COMPOSITE1, 1448 .vmux = SAA7115_COMPOSITE0, 1449 .amux = EM28XX_AMUX_LINE_IN, 1450 }, { 1451 .type = EM28XX_VMUX_SVIDEO, 1452 .vmux = SAA7115_SVIDEO3, 1453 .amux = EM28XX_AMUX_LINE_IN, 1454 } }, 1455 }, 1456 [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = { 1457 .name = "Pixelview PlayTV Box 4 USB 2.0", 1458 .tda9887_conf = TDA9887_PRESENT, 1459 .tuner_type = TUNER_YMEC_TVF_5533MF, 1460 .decoder = EM28XX_SAA711X, 1461 .input = { { 1462 .type = EM28XX_VMUX_TELEVISION, 1463 .vmux = SAA7115_COMPOSITE2, 1464 .amux = EM28XX_AMUX_VIDEO, 1465 .aout = EM28XX_AOUT_MONO | /* I2S */ 1466 EM28XX_AOUT_MASTER, /* Line out pin */ 1467 }, { 1468 .type = EM28XX_VMUX_COMPOSITE1, 1469 .vmux = SAA7115_COMPOSITE0, 1470 .amux = EM28XX_AMUX_LINE_IN, 1471 }, { 1472 .type = EM28XX_VMUX_SVIDEO, 1473 .vmux = SAA7115_SVIDEO3, 1474 .amux = EM28XX_AMUX_LINE_IN, 1475 } }, 1476 }, 1477 [EM2820_BOARD_PROLINK_PLAYTV_USB2] = { 1478 .name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0", 1479 .buttons = std_snapshot_button, 1480 .tda9887_conf = TDA9887_PRESENT, 1481 .tuner_type = TUNER_YMEC_TVF_5533MF, 1482 .decoder = EM28XX_SAA711X, 1483 .input = { { 1484 .type = EM28XX_VMUX_TELEVISION, 1485 .vmux = SAA7115_COMPOSITE2, 1486 .amux = EM28XX_AMUX_VIDEO, 1487 .aout = EM28XX_AOUT_MONO | /* I2S */ 1488 EM28XX_AOUT_MASTER, /* Line out pin */ 1489 }, { 1490 .type = EM28XX_VMUX_COMPOSITE1, 1491 .vmux = SAA7115_COMPOSITE0, 1492 .amux = EM28XX_AMUX_LINE_IN, 1493 }, { 1494 .type = EM28XX_VMUX_SVIDEO, 1495 .vmux = SAA7115_SVIDEO3, 1496 .amux = EM28XX_AMUX_LINE_IN, 1497 } }, 1498 }, 1499 [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = { 1500 .name = "EM2860/SAA711X Reference Design", 1501 .buttons = std_snapshot_button, 1502 .tuner_type = TUNER_ABSENT, 1503 .decoder = EM28XX_SAA711X, 1504 .input = { { 1505 .type = EM28XX_VMUX_SVIDEO, 1506 .vmux = SAA7115_SVIDEO3, 1507 }, { 1508 .type = EM28XX_VMUX_COMPOSITE1, 1509 .vmux = SAA7115_COMPOSITE0, 1510 } }, 1511 }, 1512 1513 [EM2874_BOARD_LEADERSHIP_ISDBT] = { 1514 .def_i2c_bus = 1, 1515 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1516 EM28XX_I2C_FREQ_100_KHZ, 1517 .xclk = EM28XX_XCLK_FREQUENCY_10MHZ, 1518 .name = "EM2874 Leadership ISDBT", 1519 .tuner_type = TUNER_ABSENT, 1520 .tuner_gpio = leadership_reset, 1521 .dvb_gpio = leadership_digital, 1522 .has_dvb = 1, 1523 }, 1524 1525 [EM2880_BOARD_MSI_DIGIVOX_AD] = { 1526 .name = "MSI DigiVox A/D", 1527 .valid = EM28XX_BOARD_NOT_VALIDATED, 1528 .tuner_type = TUNER_XC2028, 1529 .tuner_gpio = default_tuner_gpio, 1530 .decoder = EM28XX_TVP5150, 1531 .input = { { 1532 .type = EM28XX_VMUX_TELEVISION, 1533 .vmux = TVP5150_COMPOSITE0, 1534 .amux = EM28XX_AMUX_VIDEO, 1535 .gpio = em2880_msi_digivox_ad_analog, 1536 }, { 1537 .type = EM28XX_VMUX_COMPOSITE1, 1538 .vmux = TVP5150_COMPOSITE1, 1539 .amux = EM28XX_AMUX_LINE_IN, 1540 .gpio = em2880_msi_digivox_ad_analog, 1541 }, { 1542 .type = EM28XX_VMUX_SVIDEO, 1543 .vmux = TVP5150_SVIDEO, 1544 .amux = EM28XX_AMUX_LINE_IN, 1545 .gpio = em2880_msi_digivox_ad_analog, 1546 } }, 1547 }, 1548 [EM2880_BOARD_MSI_DIGIVOX_AD_II] = { 1549 .name = "MSI DigiVox A/D II", 1550 .valid = EM28XX_BOARD_NOT_VALIDATED, 1551 .tuner_type = TUNER_XC2028, 1552 .tuner_gpio = default_tuner_gpio, 1553 .decoder = EM28XX_TVP5150, 1554 .input = { { 1555 .type = EM28XX_VMUX_TELEVISION, 1556 .vmux = TVP5150_COMPOSITE0, 1557 .amux = EM28XX_AMUX_VIDEO, 1558 .gpio = em2880_msi_digivox_ad_analog, 1559 }, { 1560 .type = EM28XX_VMUX_COMPOSITE1, 1561 .vmux = TVP5150_COMPOSITE1, 1562 .amux = EM28XX_AMUX_LINE_IN, 1563 .gpio = em2880_msi_digivox_ad_analog, 1564 }, { 1565 .type = EM28XX_VMUX_SVIDEO, 1566 .vmux = TVP5150_SVIDEO, 1567 .amux = EM28XX_AMUX_LINE_IN, 1568 .gpio = em2880_msi_digivox_ad_analog, 1569 } }, 1570 }, 1571 [EM2880_BOARD_KWORLD_DVB_305U] = { 1572 .name = "KWorld DVB-T 305U", 1573 .tuner_type = TUNER_XC2028, 1574 .tuner_gpio = default_tuner_gpio, 1575 .decoder = EM28XX_TVP5150, 1576 .input = { { 1577 .type = EM28XX_VMUX_TELEVISION, 1578 .vmux = TVP5150_COMPOSITE0, 1579 .amux = EM28XX_AMUX_VIDEO, 1580 }, { 1581 .type = EM28XX_VMUX_COMPOSITE1, 1582 .vmux = TVP5150_COMPOSITE1, 1583 .amux = EM28XX_AMUX_LINE_IN, 1584 }, { 1585 .type = EM28XX_VMUX_SVIDEO, 1586 .vmux = TVP5150_SVIDEO, 1587 .amux = EM28XX_AMUX_LINE_IN, 1588 } }, 1589 }, 1590 [EM2880_BOARD_KWORLD_DVB_310U] = { 1591 .name = "KWorld DVB-T 310U", 1592 .tuner_type = TUNER_XC2028, 1593 .tuner_gpio = default_tuner_gpio, 1594 .has_dvb = 1, 1595 .dvb_gpio = default_digital, 1596 .mts_firmware = 1, 1597 .decoder = EM28XX_TVP5150, 1598 .input = { { 1599 .type = EM28XX_VMUX_TELEVISION, 1600 .vmux = TVP5150_COMPOSITE0, 1601 .amux = EM28XX_AMUX_VIDEO, 1602 .gpio = default_analog, 1603 }, { 1604 .type = EM28XX_VMUX_COMPOSITE1, 1605 .vmux = TVP5150_COMPOSITE1, 1606 .amux = EM28XX_AMUX_LINE_IN, 1607 .gpio = default_analog, 1608 }, { /* S-video has not been tested yet */ 1609 .type = EM28XX_VMUX_SVIDEO, 1610 .vmux = TVP5150_SVIDEO, 1611 .amux = EM28XX_AMUX_LINE_IN, 1612 .gpio = default_analog, 1613 } }, 1614 }, 1615 [EM2882_BOARD_KWORLD_ATSC_315U] = { 1616 .name = "KWorld ATSC 315U HDTV TV Box", 1617 .valid = EM28XX_BOARD_NOT_VALIDATED, 1618 .tuner_type = TUNER_THOMSON_DTT761X, 1619 .tuner_gpio = em2882_kworld_315u_tuner_gpio, 1620 .tda9887_conf = TDA9887_PRESENT, 1621 .decoder = EM28XX_SAA711X, 1622 .has_dvb = 1, 1623 .dvb_gpio = em2882_kworld_315u_digital, 1624 .ir_codes = RC_MAP_KWORLD_315U, 1625 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1626 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 1627 /* Analog mode - still not ready */ 1628 /*.input = { { 1629 .type = EM28XX_VMUX_TELEVISION, 1630 .vmux = SAA7115_COMPOSITE2, 1631 .amux = EM28XX_AMUX_VIDEO, 1632 .gpio = em2882_kworld_315u_analog, 1633 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1634 }, { 1635 .type = EM28XX_VMUX_COMPOSITE1, 1636 .vmux = SAA7115_COMPOSITE0, 1637 .amux = EM28XX_AMUX_LINE_IN, 1638 .gpio = em2882_kworld_315u_analog1, 1639 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1640 }, { 1641 .type = EM28XX_VMUX_SVIDEO, 1642 .vmux = SAA7115_SVIDEO3, 1643 .amux = EM28XX_AMUX_LINE_IN, 1644 .gpio = em2882_kworld_315u_analog1, 1645 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1646 } }, */ 1647 }, 1648 [EM2880_BOARD_EMPIRE_DUAL_TV] = { 1649 .name = "Empire dual TV", 1650 .tuner_type = TUNER_XC2028, 1651 .tuner_gpio = default_tuner_gpio, 1652 .has_dvb = 1, 1653 .dvb_gpio = default_digital, 1654 .mts_firmware = 1, 1655 .decoder = EM28XX_TVP5150, 1656 .input = { { 1657 .type = EM28XX_VMUX_TELEVISION, 1658 .vmux = TVP5150_COMPOSITE0, 1659 .amux = EM28XX_AMUX_VIDEO, 1660 .gpio = default_analog, 1661 }, { 1662 .type = EM28XX_VMUX_COMPOSITE1, 1663 .vmux = TVP5150_COMPOSITE1, 1664 .amux = EM28XX_AMUX_LINE_IN, 1665 .gpio = default_analog, 1666 }, { 1667 .type = EM28XX_VMUX_SVIDEO, 1668 .vmux = TVP5150_SVIDEO, 1669 .amux = EM28XX_AMUX_LINE_IN, 1670 .gpio = default_analog, 1671 } }, 1672 }, 1673 [EM2881_BOARD_DNT_DA2_HYBRID] = { 1674 .name = "DNT DA2 Hybrid", 1675 .valid = EM28XX_BOARD_NOT_VALIDATED, 1676 .tuner_type = TUNER_XC2028, 1677 .tuner_gpio = default_tuner_gpio, 1678 .decoder = EM28XX_TVP5150, 1679 .input = { { 1680 .type = EM28XX_VMUX_TELEVISION, 1681 .vmux = TVP5150_COMPOSITE0, 1682 .amux = EM28XX_AMUX_VIDEO, 1683 .gpio = default_analog, 1684 }, { 1685 .type = EM28XX_VMUX_COMPOSITE1, 1686 .vmux = TVP5150_COMPOSITE1, 1687 .amux = EM28XX_AMUX_LINE_IN, 1688 .gpio = default_analog, 1689 }, { 1690 .type = EM28XX_VMUX_SVIDEO, 1691 .vmux = TVP5150_SVIDEO, 1692 .amux = EM28XX_AMUX_LINE_IN, 1693 .gpio = default_analog, 1694 } }, 1695 }, 1696 [EM2881_BOARD_PINNACLE_HYBRID_PRO] = { 1697 .name = "Pinnacle Hybrid Pro", 1698 .tuner_type = TUNER_XC2028, 1699 .tuner_gpio = default_tuner_gpio, 1700 .decoder = EM28XX_TVP5150, 1701 .has_dvb = 1, 1702 .dvb_gpio = pinnacle_hybrid_pro_digital, 1703 .input = { { 1704 .type = EM28XX_VMUX_TELEVISION, 1705 .vmux = TVP5150_COMPOSITE0, 1706 .amux = EM28XX_AMUX_VIDEO, 1707 .gpio = pinnacle_hybrid_pro_analog, 1708 }, { 1709 .type = EM28XX_VMUX_COMPOSITE1, 1710 .vmux = TVP5150_COMPOSITE1, 1711 .amux = EM28XX_AMUX_LINE_IN, 1712 .gpio = pinnacle_hybrid_pro_analog, 1713 }, { 1714 .type = EM28XX_VMUX_SVIDEO, 1715 .vmux = TVP5150_SVIDEO, 1716 .amux = EM28XX_AMUX_LINE_IN, 1717 .gpio = pinnacle_hybrid_pro_analog, 1718 } }, 1719 }, 1720 [EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = { 1721 .name = "Pinnacle Hybrid Pro (330e)", 1722 .tuner_type = TUNER_XC2028, 1723 .tuner_gpio = default_tuner_gpio, 1724 .mts_firmware = 1, 1725 .has_dvb = 1, 1726 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, 1727 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 1728 .decoder = EM28XX_TVP5150, 1729 .input = { { 1730 .type = EM28XX_VMUX_TELEVISION, 1731 .vmux = TVP5150_COMPOSITE0, 1732 .amux = EM28XX_AMUX_VIDEO, 1733 .gpio = hauppauge_wintv_hvr_900_analog, 1734 }, { 1735 .type = EM28XX_VMUX_COMPOSITE1, 1736 .vmux = TVP5150_COMPOSITE1, 1737 .amux = EM28XX_AMUX_LINE_IN, 1738 .gpio = hauppauge_wintv_hvr_900_analog, 1739 }, { 1740 .type = EM28XX_VMUX_SVIDEO, 1741 .vmux = TVP5150_SVIDEO, 1742 .amux = EM28XX_AMUX_LINE_IN, 1743 .gpio = hauppauge_wintv_hvr_900_analog, 1744 } }, 1745 }, 1746 [EM2882_BOARD_KWORLD_VS_DVBT] = { 1747 .name = "Kworld VS-DVB-T 323UR", 1748 .tuner_type = TUNER_XC2028, 1749 .tuner_gpio = default_tuner_gpio, 1750 .decoder = EM28XX_TVP5150, 1751 .mts_firmware = 1, 1752 .has_dvb = 1, 1753 .dvb_gpio = kworld_330u_digital, 1754 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 1755 .ir_codes = RC_MAP_KWORLD_315U, 1756 .input = { { 1757 .type = EM28XX_VMUX_TELEVISION, 1758 .vmux = TVP5150_COMPOSITE0, 1759 .amux = EM28XX_AMUX_VIDEO, 1760 }, { 1761 .type = EM28XX_VMUX_COMPOSITE1, 1762 .vmux = TVP5150_COMPOSITE1, 1763 .amux = EM28XX_AMUX_LINE_IN, 1764 }, { 1765 .type = EM28XX_VMUX_SVIDEO, 1766 .vmux = TVP5150_SVIDEO, 1767 .amux = EM28XX_AMUX_LINE_IN, 1768 } }, 1769 }, 1770 [EM2882_BOARD_TERRATEC_HYBRID_XS] = { 1771 .name = "Terratec Cinnergy Hybrid T USB XS (em2882)", 1772 .tuner_type = TUNER_XC2028, 1773 .tuner_gpio = default_tuner_gpio, 1774 .mts_firmware = 1, 1775 .decoder = EM28XX_TVP5150, 1776 .has_dvb = 1, 1777 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1778 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS, 1779 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1780 .input = { { 1781 .type = EM28XX_VMUX_TELEVISION, 1782 .vmux = TVP5150_COMPOSITE0, 1783 .amux = EM28XX_AMUX_VIDEO, 1784 .gpio = hauppauge_wintv_hvr_900_analog, 1785 }, { 1786 .type = EM28XX_VMUX_COMPOSITE1, 1787 .vmux = TVP5150_COMPOSITE1, 1788 .amux = EM28XX_AMUX_LINE_IN, 1789 .gpio = hauppauge_wintv_hvr_900_analog, 1790 }, { 1791 .type = EM28XX_VMUX_SVIDEO, 1792 .vmux = TVP5150_SVIDEO, 1793 .amux = EM28XX_AMUX_LINE_IN, 1794 .gpio = hauppauge_wintv_hvr_900_analog, 1795 } }, 1796 }, 1797 [EM2882_BOARD_DIKOM_DK300] = { 1798 .name = "Dikom DK300", 1799 .tuner_type = TUNER_XC2028, 1800 .tuner_gpio = default_tuner_gpio, 1801 .decoder = EM28XX_TVP5150, 1802 .mts_firmware = 1, 1803 .has_dvb = 1, 1804 .dvb_gpio = dikom_dk300_digital, 1805 .input = { { 1806 .type = EM28XX_VMUX_TELEVISION, 1807 .vmux = TVP5150_COMPOSITE0, 1808 .amux = EM28XX_AMUX_VIDEO, 1809 .gpio = default_analog, 1810 } }, 1811 }, 1812 [EM2883_BOARD_KWORLD_HYBRID_330U] = { 1813 .name = "Kworld PlusTV HD Hybrid 330", 1814 .tuner_type = TUNER_XC2028, 1815 .tuner_gpio = default_tuner_gpio, 1816 .decoder = EM28XX_TVP5150, 1817 .mts_firmware = 1, 1818 .has_dvb = 1, 1819 .dvb_gpio = kworld_330u_digital, 1820 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1821 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1822 EM28XX_I2C_EEPROM_ON_BOARD | 1823 EM28XX_I2C_EEPROM_KEY_VALID, 1824 .input = { { 1825 .type = EM28XX_VMUX_TELEVISION, 1826 .vmux = TVP5150_COMPOSITE0, 1827 .amux = EM28XX_AMUX_VIDEO, 1828 .gpio = kworld_330u_analog, 1829 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1830 }, { 1831 .type = EM28XX_VMUX_COMPOSITE1, 1832 .vmux = TVP5150_COMPOSITE1, 1833 .amux = EM28XX_AMUX_LINE_IN, 1834 .gpio = kworld_330u_analog, 1835 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1836 }, { 1837 .type = EM28XX_VMUX_SVIDEO, 1838 .vmux = TVP5150_SVIDEO, 1839 .amux = EM28XX_AMUX_LINE_IN, 1840 .gpio = kworld_330u_analog, 1841 } }, 1842 }, 1843 [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = { 1844 .name = "Compro VideoMate ForYou/Stereo", 1845 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1846 .tvaudio_addr = 0xb0, 1847 .tda9887_conf = TDA9887_PRESENT, 1848 .decoder = EM28XX_TVP5150, 1849 .adecoder = EM28XX_TVAUDIO, 1850 .mute_gpio = compro_mute_gpio, 1851 .input = { { 1852 .type = EM28XX_VMUX_TELEVISION, 1853 .vmux = TVP5150_COMPOSITE0, 1854 .amux = EM28XX_AMUX_VIDEO, 1855 .gpio = compro_unmute_tv_gpio, 1856 }, { 1857 .type = EM28XX_VMUX_SVIDEO, 1858 .vmux = TVP5150_SVIDEO, 1859 .amux = EM28XX_AMUX_LINE_IN, 1860 .gpio = compro_unmute_svid_gpio, 1861 } }, 1862 }, 1863 [EM2860_BOARD_KAIOMY_TVNPC_U2] = { 1864 .name = "Kaiomy TVnPC U2", 1865 .vchannels = 3, 1866 .tuner_type = TUNER_XC2028, 1867 .tuner_addr = 0x61, 1868 .mts_firmware = 1, 1869 .decoder = EM28XX_TVP5150, 1870 .tuner_gpio = default_tuner_gpio, 1871 .ir_codes = RC_MAP_KAIOMY, 1872 .input = { { 1873 .type = EM28XX_VMUX_TELEVISION, 1874 .vmux = TVP5150_COMPOSITE0, 1875 .amux = EM28XX_AMUX_VIDEO, 1876 1877 }, { 1878 .type = EM28XX_VMUX_COMPOSITE1, 1879 .vmux = TVP5150_COMPOSITE1, 1880 .amux = EM28XX_AMUX_LINE_IN, 1881 }, { 1882 .type = EM28XX_VMUX_SVIDEO, 1883 .vmux = TVP5150_SVIDEO, 1884 .amux = EM28XX_AMUX_LINE_IN, 1885 } }, 1886 .radio = { 1887 .type = EM28XX_RADIO, 1888 .amux = EM28XX_AMUX_LINE_IN, 1889 } 1890 }, 1891 [EM2860_BOARD_EASYCAP] = { 1892 .name = "Easy Cap Capture DC-60", 1893 .vchannels = 2, 1894 .tuner_type = TUNER_ABSENT, 1895 .decoder = EM28XX_SAA711X, 1896 .input = { { 1897 .type = EM28XX_VMUX_COMPOSITE1, 1898 .vmux = SAA7115_COMPOSITE0, 1899 .amux = EM28XX_AMUX_LINE_IN, 1900 }, { 1901 .type = EM28XX_VMUX_SVIDEO, 1902 .vmux = SAA7115_SVIDEO3, 1903 .amux = EM28XX_AMUX_LINE_IN, 1904 } }, 1905 }, 1906 [EM2820_BOARD_IODATA_GVMVP_SZ] = { 1907 .name = "IO-DATA GV-MVP/SZ", 1908 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 1909 .tuner_gpio = default_tuner_gpio, 1910 .tda9887_conf = TDA9887_PRESENT, 1911 .decoder = EM28XX_TVP5150, 1912 .input = { { 1913 .type = EM28XX_VMUX_TELEVISION, 1914 .vmux = TVP5150_COMPOSITE0, 1915 .amux = EM28XX_AMUX_VIDEO, 1916 }, { /* Composite has not been tested yet */ 1917 .type = EM28XX_VMUX_COMPOSITE1, 1918 .vmux = TVP5150_COMPOSITE1, 1919 .amux = EM28XX_AMUX_VIDEO, 1920 }, { /* S-video has not been tested yet */ 1921 .type = EM28XX_VMUX_SVIDEO, 1922 .vmux = TVP5150_SVIDEO, 1923 .amux = EM28XX_AMUX_VIDEO, 1924 } }, 1925 }, 1926 [EM2860_BOARD_TERRATEC_GRABBY] = { 1927 .name = "Terratec Grabby", 1928 .vchannels = 2, 1929 .tuner_type = TUNER_ABSENT, 1930 .decoder = EM28XX_SAA711X, 1931 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1932 .input = { { 1933 .type = EM28XX_VMUX_COMPOSITE1, 1934 .vmux = SAA7115_COMPOSITE0, 1935 .amux = EM28XX_AMUX_LINE_IN, 1936 }, { 1937 .type = EM28XX_VMUX_SVIDEO, 1938 .vmux = SAA7115_SVIDEO3, 1939 .amux = EM28XX_AMUX_LINE_IN, 1940 } }, 1941 }, 1942 [EM2860_BOARD_TERRATEC_AV350] = { 1943 .name = "Terratec AV350", 1944 .vchannels = 2, 1945 .tuner_type = TUNER_ABSENT, 1946 .decoder = EM28XX_TVP5150, 1947 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1948 .mute_gpio = terratec_av350_mute_gpio, 1949 .input = { { 1950 .type = EM28XX_VMUX_COMPOSITE1, 1951 .vmux = TVP5150_COMPOSITE1, 1952 .amux = EM28XX_AUDIO_SRC_LINE, 1953 .gpio = terratec_av350_unmute_gpio, 1954 1955 }, { 1956 .type = EM28XX_VMUX_SVIDEO, 1957 .vmux = TVP5150_SVIDEO, 1958 .amux = EM28XX_AUDIO_SRC_LINE, 1959 .gpio = terratec_av350_unmute_gpio, 1960 } }, 1961 }, 1962 1963 [EM2860_BOARD_ELGATO_VIDEO_CAPTURE] = { 1964 .name = "Elgato Video Capture", 1965 .decoder = EM28XX_SAA711X, 1966 .tuner_type = TUNER_ABSENT, /* Capture only device */ 1967 .input = { { 1968 .type = EM28XX_VMUX_COMPOSITE1, 1969 .vmux = SAA7115_COMPOSITE0, 1970 .amux = EM28XX_AMUX_LINE_IN, 1971 }, { 1972 .type = EM28XX_VMUX_SVIDEO, 1973 .vmux = SAA7115_SVIDEO3, 1974 .amux = EM28XX_AMUX_LINE_IN, 1975 } }, 1976 }, 1977 1978 [EM2882_BOARD_EVGA_INDTUBE] = { 1979 .name = "Evga inDtube", 1980 .tuner_type = TUNER_XC2028, 1981 .tuner_gpio = default_tuner_gpio, 1982 .decoder = EM28XX_TVP5150, 1983 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 1984 .mts_firmware = 1, 1985 .has_dvb = 1, 1986 .dvb_gpio = evga_indtube_digital, 1987 .ir_codes = RC_MAP_EVGA_INDTUBE, 1988 .input = { { 1989 .type = EM28XX_VMUX_TELEVISION, 1990 .vmux = TVP5150_COMPOSITE0, 1991 .amux = EM28XX_AMUX_VIDEO, 1992 .gpio = evga_indtube_analog, 1993 }, { 1994 .type = EM28XX_VMUX_COMPOSITE1, 1995 .vmux = TVP5150_COMPOSITE1, 1996 .amux = EM28XX_AMUX_LINE_IN, 1997 .gpio = evga_indtube_analog, 1998 }, { 1999 .type = EM28XX_VMUX_SVIDEO, 2000 .vmux = TVP5150_SVIDEO, 2001 .amux = EM28XX_AMUX_LINE_IN, 2002 .gpio = evga_indtube_analog, 2003 } }, 2004 }, 2005 /* eb1a:2868 Empia EM2870 + Philips CU1216L NIM (Philips TDA10023 + 2006 Infineon TUA6034) */ 2007 [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = { 2008 .name = "Reddo DVB-C USB TV Box", 2009 .tuner_type = TUNER_ABSENT, 2010 .tuner_gpio = reddo_dvb_c_usb_box, 2011 .has_dvb = 1, 2012 }, 2013 /* 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold 2014 * initially as the KWorld PlusTV 340U, then as the UB435-Q. 2015 * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 */ 2016 [EM2870_BOARD_KWORLD_A340] = { 2017 .name = "KWorld PlusTV 340U or UB435-Q (ATSC)", 2018 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */ 2019 .has_dvb = 1, 2020 .dvb_gpio = kworld_a340_digital, 2021 .tuner_gpio = default_tuner_gpio, 2022 }, 2023 /* 2013:024f PCTV nanoStick T2 290e. 2024 * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 */ 2025 [EM28174_BOARD_PCTV_290E] = { 2026 .name = "PCTV nanoStick T2 290e", 2027 .def_i2c_bus = 1, 2028 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ, 2029 .tuner_type = TUNER_ABSENT, 2030 .tuner_gpio = pctv_290e, 2031 .has_dvb = 1, 2032 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2033 }, 2034 /* 2013:024f PCTV DVB-S2 Stick 460e 2035 * Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293 */ 2036 [EM28174_BOARD_PCTV_460E] = { 2037 .def_i2c_bus = 1, 2038 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, 2039 .name = "PCTV DVB-S2 Stick (460e)", 2040 .tuner_type = TUNER_ABSENT, 2041 .tuner_gpio = pctv_460e, 2042 .has_dvb = 1, 2043 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2044 }, 2045 /* eb1a:5006 Honestech VIDBOX NW03 2046 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner */ 2047 [EM2860_BOARD_HT_VIDBOX_NW03] = { 2048 .name = "Honestech Vidbox NW03", 2049 .tuner_type = TUNER_ABSENT, 2050 .decoder = EM28XX_SAA711X, 2051 .input = { { 2052 .type = EM28XX_VMUX_COMPOSITE1, 2053 .vmux = SAA7115_COMPOSITE0, 2054 .amux = EM28XX_AMUX_LINE_IN, 2055 }, { 2056 .type = EM28XX_VMUX_SVIDEO, 2057 .vmux = SAA7115_SVIDEO3, /* S-VIDEO needs confirming */ 2058 .amux = EM28XX_AMUX_LINE_IN, 2059 } }, 2060 }, 2061 /* 1b80:e425 MaxMedia UB425-TC 2062 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 */ 2063 [EM2874_BOARD_MAXMEDIA_UB425_TC] = { 2064 .name = "MaxMedia UB425-TC", 2065 .tuner_type = TUNER_ABSENT, 2066 .tuner_gpio = maxmedia_ub425_tc, 2067 .has_dvb = 1, 2068 .ir_codes = RC_MAP_REDDO, 2069 .def_i2c_bus = 1, 2070 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2071 EM28XX_I2C_FREQ_400_KHZ, 2072 }, 2073 /* 2304:0242 PCTV QuatroStick (510e) 2074 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */ 2075 [EM2884_BOARD_PCTV_510E] = { 2076 .name = "PCTV QuatroStick (510e)", 2077 .tuner_type = TUNER_ABSENT, 2078 .tuner_gpio = pctv_510e, 2079 .has_dvb = 1, 2080 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2081 .def_i2c_bus = 1, 2082 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2083 EM28XX_I2C_FREQ_400_KHZ, 2084 }, 2085 /* 2013:0251 PCTV QuatroStick nano (520e) 2086 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */ 2087 [EM2884_BOARD_PCTV_520E] = { 2088 .name = "PCTV QuatroStick nano (520e)", 2089 .tuner_type = TUNER_ABSENT, 2090 .tuner_gpio = pctv_520e, 2091 .has_dvb = 1, 2092 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2093 .def_i2c_bus = 1, 2094 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2095 EM28XX_I2C_FREQ_400_KHZ, 2096 }, 2097 [EM2884_BOARD_TERRATEC_HTC_USB_XS] = { 2098 .name = "Terratec Cinergy HTC USB XS", 2099 .has_dvb = 1, 2100 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, 2101 .tuner_type = TUNER_ABSENT, 2102 .def_i2c_bus = 1, 2103 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2104 EM28XX_I2C_FREQ_400_KHZ, 2105 }, 2106 /* 1b80:e1cc Delock 61959 2107 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 2108 * mostly the same as MaxMedia UB-425-TC but different remote */ 2109 [EM2874_BOARD_DELOCK_61959] = { 2110 .name = "Delock 61959", 2111 .tuner_type = TUNER_ABSENT, 2112 .tuner_gpio = maxmedia_ub425_tc, 2113 .has_dvb = 1, 2114 .ir_codes = RC_MAP_DELOCK_61959, 2115 .def_i2c_bus = 1, 2116 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2117 EM28XX_I2C_FREQ_400_KHZ, 2118 }, 2119 /* 2120 * 1b80:e346 KWorld USB ATSC TV Stick UB435-Q V2 2121 * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2 2122 */ 2123 [EM2874_BOARD_KWORLD_UB435Q_V2] = { 2124 .name = "KWorld USB ATSC TV Stick UB435-Q V2", 2125 .tuner_type = TUNER_ABSENT, 2126 .has_dvb = 1, 2127 .dvb_gpio = kworld_a340_digital, 2128 .tuner_gpio = default_tuner_gpio, 2129 .def_i2c_bus = 1, 2130 }, 2131 /* 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam 2132 * Empia EM2765 + OmniVision OV2640 */ 2133 [EM2765_BOARD_SPEEDLINK_VAD_LAPLACE] = { 2134 .name = "SpeedLink Vicious And Devine Laplace webcam", 2135 .xclk = EM28XX_XCLK_FREQUENCY_24MHZ, 2136 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2137 EM28XX_I2C_FREQ_100_KHZ, 2138 .def_i2c_bus = 1, 2139 .tuner_type = TUNER_ABSENT, 2140 .is_webcam = 1, 2141 .input = { { 2142 .type = EM28XX_VMUX_COMPOSITE1, 2143 .amux = EM28XX_AMUX_VIDEO, 2144 .gpio = speedlink_vad_laplace_reg_seq, 2145 } }, 2146 .buttons = speedlink_vad_laplace_buttons, 2147 .leds = speedlink_vad_laplace_leds, 2148 }, 2149 /* 2013:0258 PCTV DVB-S2 Stick (461e) 2150 * Empia EM28178, Montage M88DS3103, Montage M88TS2022, Allegro A8293 */ 2151 [EM28178_BOARD_PCTV_461E] = { 2152 .def_i2c_bus = 1, 2153 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, 2154 .name = "PCTV DVB-S2 Stick (461e)", 2155 .tuner_type = TUNER_ABSENT, 2156 .tuner_gpio = pctv_461e, 2157 .has_dvb = 1, 2158 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2159 }, 2160 }; 2161 EXPORT_SYMBOL_GPL(em28xx_boards); 2162 2163 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); 2164 2165 /* table of devices that work with this driver */ 2166 struct usb_device_id em28xx_id_table[] = { 2167 { USB_DEVICE(0xeb1a, 0x2750), 2168 .driver_info = EM2750_BOARD_UNKNOWN }, 2169 { USB_DEVICE(0xeb1a, 0x2751), 2170 .driver_info = EM2750_BOARD_UNKNOWN }, 2171 { USB_DEVICE(0xeb1a, 0x2800), 2172 .driver_info = EM2800_BOARD_UNKNOWN }, 2173 { USB_DEVICE(0xeb1a, 0x2710), 2174 .driver_info = EM2820_BOARD_UNKNOWN }, 2175 { USB_DEVICE(0xeb1a, 0x2820), 2176 .driver_info = EM2820_BOARD_UNKNOWN }, 2177 { USB_DEVICE(0xeb1a, 0x2821), 2178 .driver_info = EM2820_BOARD_UNKNOWN }, 2179 { USB_DEVICE(0xeb1a, 0x2860), 2180 .driver_info = EM2820_BOARD_UNKNOWN }, 2181 { USB_DEVICE(0xeb1a, 0x2861), 2182 .driver_info = EM2820_BOARD_UNKNOWN }, 2183 { USB_DEVICE(0xeb1a, 0x2862), 2184 .driver_info = EM2820_BOARD_UNKNOWN }, 2185 { USB_DEVICE(0xeb1a, 0x2863), 2186 .driver_info = EM2820_BOARD_UNKNOWN }, 2187 { USB_DEVICE(0xeb1a, 0x2870), 2188 .driver_info = EM2820_BOARD_UNKNOWN }, 2189 { USB_DEVICE(0xeb1a, 0x2881), 2190 .driver_info = EM2820_BOARD_UNKNOWN }, 2191 { USB_DEVICE(0xeb1a, 0x2883), 2192 .driver_info = EM2820_BOARD_UNKNOWN }, 2193 { USB_DEVICE(0xeb1a, 0x2868), 2194 .driver_info = EM2820_BOARD_UNKNOWN }, 2195 { USB_DEVICE(0xeb1a, 0x2875), 2196 .driver_info = EM2820_BOARD_UNKNOWN }, 2197 { USB_DEVICE(0xeb1a, 0xe300), 2198 .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U }, 2199 { USB_DEVICE(0xeb1a, 0xe303), 2200 .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 }, 2201 { USB_DEVICE(0xeb1a, 0xe305), 2202 .driver_info = EM2880_BOARD_KWORLD_DVB_305U }, 2203 { USB_DEVICE(0xeb1a, 0xe310), 2204 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD }, 2205 { USB_DEVICE(0xeb1a, 0xa313), 2206 .driver_info = EM2882_BOARD_KWORLD_ATSC_315U }, 2207 { USB_DEVICE(0xeb1a, 0xa316), 2208 .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U }, 2209 { USB_DEVICE(0xeb1a, 0xe320), 2210 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II }, 2211 { USB_DEVICE(0xeb1a, 0xe323), 2212 .driver_info = EM2882_BOARD_KWORLD_VS_DVBT }, 2213 { USB_DEVICE(0xeb1a, 0xe350), 2214 .driver_info = EM2870_BOARD_KWORLD_350U }, 2215 { USB_DEVICE(0xeb1a, 0xe355), 2216 .driver_info = EM2870_BOARD_KWORLD_355U }, 2217 { USB_DEVICE(0xeb1a, 0x2801), 2218 .driver_info = EM2800_BOARD_GRABBEEX_USB2800 }, 2219 { USB_DEVICE(0xeb1a, 0xe357), 2220 .driver_info = EM2870_BOARD_KWORLD_355U }, 2221 { USB_DEVICE(0xeb1a, 0xe359), 2222 .driver_info = EM2870_BOARD_KWORLD_355U }, 2223 { USB_DEVICE(0x1b80, 0xe302), 2224 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */ 2225 { USB_DEVICE(0x1b80, 0xe304), 2226 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kworld DVD Maker 2 */ 2227 { USB_DEVICE(0x0ccd, 0x0036), 2228 .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 }, 2229 { USB_DEVICE(0x0ccd, 0x004c), 2230 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR }, 2231 { USB_DEVICE(0x0ccd, 0x004f), 2232 .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS }, 2233 { USB_DEVICE(0x0ccd, 0x005e), 2234 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, 2235 { USB_DEVICE(0x0ccd, 0x0042), 2236 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, 2237 { USB_DEVICE(0x0ccd, 0x0043), 2238 .driver_info = EM2870_BOARD_TERRATEC_XS }, 2239 { USB_DEVICE(0x0ccd, 0x008e), /* Cinergy HTC USB XS Rev. 1 */ 2240 .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS }, 2241 { USB_DEVICE(0x0ccd, 0x00ac), /* Cinergy HTC USB XS Rev. 2 */ 2242 .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS }, 2243 { USB_DEVICE(0x0ccd, 0x10a2), /* H5 Rev. 1 */ 2244 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2245 { USB_DEVICE(0x0ccd, 0x10ad), /* H5 Rev. 2 */ 2246 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2247 { USB_DEVICE(0x0ccd, 0x10b6), /* H5 Rev. 3 */ 2248 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2249 { USB_DEVICE(0x0ccd, 0x0084), 2250 .driver_info = EM2860_BOARD_TERRATEC_AV350 }, 2251 { USB_DEVICE(0x0ccd, 0x0096), 2252 .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, 2253 { USB_DEVICE(0x0ccd, 0x10AF), 2254 .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, 2255 { USB_DEVICE(0x0ccd, 0x00b2), 2256 .driver_info = EM2884_BOARD_CINERGY_HTC_STICK }, 2257 { USB_DEVICE(0x0fd9, 0x0033), 2258 .driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE}, 2259 { USB_DEVICE(0x185b, 0x2870), 2260 .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE }, 2261 { USB_DEVICE(0x185b, 0x2041), 2262 .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU }, 2263 { USB_DEVICE(0x2040, 0x4200), 2264 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, 2265 { USB_DEVICE(0x2040, 0x4201), 2266 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, 2267 { USB_DEVICE(0x2040, 0x6500), 2268 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 }, 2269 { USB_DEVICE(0x2040, 0x6502), 2270 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 }, 2271 { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */ 2272 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2273 { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */ 2274 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2275 { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */ 2276 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2277 { USB_DEVICE(0x2040, 0x651f), 2278 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 }, 2279 { USB_DEVICE(0x0438, 0xb002), 2280 .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 }, 2281 { USB_DEVICE(0x2001, 0xf112), 2282 .driver_info = EM2820_BOARD_DLINK_USB_TV }, 2283 { USB_DEVICE(0x2304, 0x0207), 2284 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2285 { USB_DEVICE(0x2304, 0x0208), 2286 .driver_info = EM2820_BOARD_PINNACLE_USB_2 }, 2287 { USB_DEVICE(0x2304, 0x021a), 2288 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2289 { USB_DEVICE(0x2304, 0x0226), 2290 .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E }, 2291 { USB_DEVICE(0x2304, 0x0227), 2292 .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO }, 2293 { USB_DEVICE(0x0413, 0x6023), 2294 .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII }, 2295 { USB_DEVICE(0x093b, 0xa003), 2296 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2297 { USB_DEVICE(0x093b, 0xa005), 2298 .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U }, 2299 { USB_DEVICE(0x04bb, 0x0515), 2300 .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ }, 2301 { USB_DEVICE(0xeb1a, 0x50a6), 2302 .driver_info = EM2860_BOARD_GADMEI_UTV330 }, 2303 { USB_DEVICE(0x1b80, 0xa340), 2304 .driver_info = EM2870_BOARD_KWORLD_A340 }, 2305 { USB_DEVICE(0x1b80, 0xe346), 2306 .driver_info = EM2874_BOARD_KWORLD_UB435Q_V2 }, 2307 { USB_DEVICE(0x2013, 0x024f), 2308 .driver_info = EM28174_BOARD_PCTV_290E }, 2309 { USB_DEVICE(0x2013, 0x024c), 2310 .driver_info = EM28174_BOARD_PCTV_460E }, 2311 { USB_DEVICE(0x2040, 0x1605), 2312 .driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C }, 2313 { USB_DEVICE(0x1b80, 0xe755), 2314 .driver_info = EM2884_BOARD_C3TECH_DIGITAL_DUO }, 2315 { USB_DEVICE(0xeb1a, 0x5006), 2316 .driver_info = EM2860_BOARD_HT_VIDBOX_NW03 }, 2317 { USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */ 2318 .driver_info = EM2860_BOARD_EASYCAP }, 2319 { USB_DEVICE(0x1b80, 0xe425), 2320 .driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC }, 2321 { USB_DEVICE(0x2304, 0x0242), 2322 .driver_info = EM2884_BOARD_PCTV_510E }, 2323 { USB_DEVICE(0x2013, 0x0251), 2324 .driver_info = EM2884_BOARD_PCTV_520E }, 2325 { USB_DEVICE(0x1b80, 0xe1cc), 2326 .driver_info = EM2874_BOARD_DELOCK_61959 }, 2327 { USB_DEVICE(0x1ae7, 0x9003), 2328 .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE }, 2329 { USB_DEVICE(0x1ae7, 0x9004), 2330 .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE }, 2331 { USB_DEVICE(0x2013, 0x0258), 2332 .driver_info = EM28178_BOARD_PCTV_461E }, 2333 { }, 2334 }; 2335 MODULE_DEVICE_TABLE(usb, em28xx_id_table); 2336 2337 /* 2338 * EEPROM hash table for devices with generic USB IDs 2339 */ 2340 static struct em28xx_hash_table em28xx_eeprom_hash[] = { 2341 /* P/N: SA 60002070465 Tuner: TVF7533-MF */ 2342 {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF}, 2343 {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF}, 2344 {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028}, 2345 {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028}, 2346 {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028}, 2347 {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028}, 2348 {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT}, 2349 {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028}, 2350 }; 2351 2352 /* I2C devicelist hash table for devices with generic USB IDs */ 2353 static struct em28xx_hash_table em28xx_i2c_hash[] = { 2354 {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC}, 2355 {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC}, 2356 {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT}, 2357 {0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT}, 2358 {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC}, 2359 {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF}, 2360 {0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT}, 2361 }; 2362 /* NOTE: introduce a separate hash table for devices with 16 bit eeproms */ 2363 2364 int em28xx_tuner_callback(void *ptr, int component, int command, int arg) 2365 { 2366 struct em28xx_i2c_bus *i2c_bus = ptr; 2367 struct em28xx *dev = i2c_bus->dev; 2368 int rc = 0; 2369 2370 if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000) 2371 return 0; 2372 2373 if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET) 2374 return 0; 2375 2376 rc = em28xx_gpio_set(dev, dev->board.tuner_gpio); 2377 2378 return rc; 2379 } 2380 EXPORT_SYMBOL_GPL(em28xx_tuner_callback); 2381 2382 static inline void em28xx_set_model(struct em28xx *dev) 2383 { 2384 dev->board = em28xx_boards[dev->model]; 2385 2386 /* Those are the default values for the majority of boards 2387 Use those values if not specified otherwise at boards entry 2388 */ 2389 if (!dev->board.xclk) 2390 dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE | 2391 EM28XX_XCLK_FREQUENCY_12MHZ; 2392 2393 if (!dev->board.i2c_speed) 2394 dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2395 EM28XX_I2C_FREQ_100_KHZ; 2396 2397 /* Should be initialized early, for I2C to work */ 2398 dev->def_i2c_bus = dev->board.def_i2c_bus; 2399 } 2400 2401 /* Since em28xx_pre_card_setup() requires a proper dev->model, 2402 * this won't work for boards with generic PCI IDs 2403 */ 2404 static void em28xx_pre_card_setup(struct em28xx *dev) 2405 { 2406 /* Set the initial XCLK and I2C clock values based on the board 2407 definition */ 2408 em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f); 2409 if (!dev->board.is_em2800) 2410 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed); 2411 msleep(50); 2412 2413 /* request some modules */ 2414 switch (dev->model) { 2415 case EM2861_BOARD_PLEXTOR_PX_TV100U: 2416 /* Sets the msp34xx I2S speed */ 2417 dev->i2s_speed = 2048000; 2418 break; 2419 case EM2861_BOARD_KWORLD_PVRTV_300U: 2420 case EM2880_BOARD_KWORLD_DVB_305U: 2421 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x6d); 2422 msleep(10); 2423 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x7d); 2424 msleep(10); 2425 break; 2426 case EM2870_BOARD_COMPRO_VIDEOMATE: 2427 /* TODO: someone can do some cleanup here... 2428 not everything's needed */ 2429 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); 2430 msleep(10); 2431 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01); 2432 msleep(10); 2433 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 2434 mdelay(70); 2435 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc); 2436 mdelay(70); 2437 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xdc); 2438 mdelay(70); 2439 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc); 2440 mdelay(70); 2441 break; 2442 case EM2870_BOARD_TERRATEC_XS_MT2060: 2443 /* this device needs some gpio writes to get the DVB-T 2444 demod work */ 2445 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2446 mdelay(70); 2447 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde); 2448 mdelay(70); 2449 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2450 mdelay(70); 2451 break; 2452 case EM2870_BOARD_PINNACLE_PCTV_DVB: 2453 /* this device needs some gpio writes to get the 2454 DVB-T demod work */ 2455 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2456 mdelay(70); 2457 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde); 2458 mdelay(70); 2459 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2460 mdelay(70); 2461 break; 2462 case EM2820_BOARD_GADMEI_UTV310: 2463 case EM2820_BOARD_MSI_VOX_USB_2: 2464 /* enables audio for that devices */ 2465 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 2466 break; 2467 2468 case EM2882_BOARD_KWORLD_ATSC_315U: 2469 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); 2470 msleep(10); 2471 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2472 msleep(10); 2473 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); 2474 msleep(10); 2475 em28xx_write_reg(dev, EM2880_R04_GPO, 0x08); 2476 msleep(10); 2477 break; 2478 2479 case EM2860_BOARD_KAIOMY_TVNPC_U2: 2480 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1); 2481 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1); 2482 em28xx_write_regs(dev, 0x0d, "\x42", 1); 2483 em28xx_write_regs(dev, 0x08, "\xfd", 1); 2484 msleep(10); 2485 em28xx_write_regs(dev, 0x08, "\xff", 1); 2486 msleep(10); 2487 em28xx_write_regs(dev, 0x08, "\x7f", 1); 2488 msleep(10); 2489 em28xx_write_regs(dev, 0x08, "\x6b", 1); 2490 2491 break; 2492 case EM2860_BOARD_EASYCAP: 2493 em28xx_write_regs(dev, 0x08, "\xf8", 1); 2494 break; 2495 2496 case EM2820_BOARD_IODATA_GVMVP_SZ: 2497 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); 2498 msleep(70); 2499 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7); 2500 msleep(10); 2501 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2502 msleep(70); 2503 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 2504 msleep(70); 2505 break; 2506 } 2507 2508 em28xx_gpio_set(dev, dev->board.tuner_gpio); 2509 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 2510 2511 /* Unlock device */ 2512 em28xx_set_mode(dev, EM28XX_SUSPEND); 2513 } 2514 2515 static int em28xx_hint_board(struct em28xx *dev) 2516 { 2517 int i; 2518 2519 if (dev->board.is_webcam) { 2520 if (dev->em28xx_sensor == EM28XX_MT9V011) { 2521 dev->model = EM2820_BOARD_SILVERCREST_WEBCAM; 2522 } else if (dev->em28xx_sensor == EM28XX_MT9M001 || 2523 dev->em28xx_sensor == EM28XX_MT9M111) { 2524 dev->model = EM2750_BOARD_UNKNOWN; 2525 } 2526 /* FIXME: IMPROVE ! */ 2527 2528 return 0; 2529 } 2530 2531 /* HINT method: EEPROM 2532 * 2533 * This method works only for boards with eeprom. 2534 * Uses a hash of all eeprom bytes. The hash should be 2535 * unique for a vendor/tuner pair. 2536 * There are a high chance that tuners for different 2537 * video standards produce different hashes. 2538 */ 2539 for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) { 2540 if (dev->hash == em28xx_eeprom_hash[i].hash) { 2541 dev->model = em28xx_eeprom_hash[i].model; 2542 dev->tuner_type = em28xx_eeprom_hash[i].tuner; 2543 2544 em28xx_errdev("Your board has no unique USB ID.\n"); 2545 em28xx_errdev("A hint were successfully done, " 2546 "based on eeprom hash.\n"); 2547 em28xx_errdev("This method is not 100%% failproof.\n"); 2548 em28xx_errdev("If the board were missdetected, " 2549 "please email this log to:\n"); 2550 em28xx_errdev("\tV4L Mailing List " 2551 " <linux-media@vger.kernel.org>\n"); 2552 em28xx_errdev("Board detected as %s\n", 2553 em28xx_boards[dev->model].name); 2554 2555 return 0; 2556 } 2557 } 2558 2559 /* HINT method: I2C attached devices 2560 * 2561 * This method works for all boards. 2562 * Uses a hash of i2c scanned devices. 2563 * Devices with the same i2c attached chips will 2564 * be considered equal. 2565 * This method is less precise than the eeprom one. 2566 */ 2567 2568 /* user did not request i2c scanning => do it now */ 2569 if (!dev->i2c_hash) 2570 em28xx_do_i2c_scan(dev, dev->def_i2c_bus); 2571 2572 for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) { 2573 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) { 2574 dev->model = em28xx_i2c_hash[i].model; 2575 dev->tuner_type = em28xx_i2c_hash[i].tuner; 2576 em28xx_errdev("Your board has no unique USB ID.\n"); 2577 em28xx_errdev("A hint were successfully done, " 2578 "based on i2c devicelist hash.\n"); 2579 em28xx_errdev("This method is not 100%% failproof.\n"); 2580 em28xx_errdev("If the board were missdetected, " 2581 "please email this log to:\n"); 2582 em28xx_errdev("\tV4L Mailing List " 2583 " <linux-media@vger.kernel.org>\n"); 2584 em28xx_errdev("Board detected as %s\n", 2585 em28xx_boards[dev->model].name); 2586 2587 return 0; 2588 } 2589 } 2590 2591 em28xx_errdev("Your board has no unique USB ID and thus need a " 2592 "hint to be detected.\n"); 2593 em28xx_errdev("You may try to use card=<n> insmod option to " 2594 "workaround that.\n"); 2595 em28xx_errdev("Please send an email with this log to:\n"); 2596 em28xx_errdev("\tV4L Mailing List <linux-media@vger.kernel.org>\n"); 2597 em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash); 2598 em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash); 2599 2600 em28xx_errdev("Here is a list of valid choices for the card=<n>" 2601 " insmod option:\n"); 2602 for (i = 0; i < em28xx_bcount; i++) { 2603 em28xx_errdev(" card=%d -> %s\n", 2604 i, em28xx_boards[i].name); 2605 } 2606 return -1; 2607 } 2608 2609 static void em28xx_card_setup(struct em28xx *dev) 2610 { 2611 /* 2612 * If the device can be a webcam, seek for a sensor. 2613 * If sensor is not found, then it isn't a webcam. 2614 */ 2615 if (dev->board.is_webcam) { 2616 if (em28xx_detect_sensor(dev) < 0) 2617 dev->board.is_webcam = 0; 2618 else 2619 dev->progressive = 1; 2620 } 2621 2622 switch (dev->model) { 2623 case EM2750_BOARD_UNKNOWN: 2624 case EM2820_BOARD_UNKNOWN: 2625 case EM2800_BOARD_UNKNOWN: 2626 /* 2627 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD. 2628 * 2629 * This occurs because they share identical USB vendor and 2630 * product IDs. 2631 * 2632 * What we do here is look up the EEPROM hash of the K-WORLD 2633 * and if it is found then we decide that we do not have 2634 * a DIGIVOX and reset the device to the K-WORLD instead. 2635 * 2636 * This solution is only valid if they do not share eeprom 2637 * hash identities which has not been determined as yet. 2638 */ 2639 if (em28xx_hint_board(dev) < 0) 2640 em28xx_errdev("Board not discovered\n"); 2641 else { 2642 em28xx_set_model(dev); 2643 em28xx_pre_card_setup(dev); 2644 } 2645 break; 2646 default: 2647 em28xx_set_model(dev); 2648 } 2649 2650 em28xx_info("Identified as %s (card=%d)\n", 2651 dev->board.name, dev->model); 2652 2653 dev->tuner_type = em28xx_boards[dev->model].tuner_type; 2654 if (em28xx_boards[dev->model].tuner_addr) 2655 dev->tuner_addr = em28xx_boards[dev->model].tuner_addr; 2656 2657 if (em28xx_boards[dev->model].tda9887_conf) 2658 dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf; 2659 2660 /* request some modules */ 2661 switch (dev->model) { 2662 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2: 2663 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: 2664 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: 2665 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: 2666 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: 2667 case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C: 2668 { 2669 struct tveeprom tv; 2670 2671 if (dev->eedata == NULL) 2672 break; 2673 #if defined(CONFIG_MODULES) && defined(MODULE) 2674 request_module("tveeprom"); 2675 #endif 2676 /* Call first TVeeprom */ 2677 2678 dev->i2c_client[dev->def_i2c_bus].addr = 0xa0 >> 1; 2679 tveeprom_hauppauge_analog(&dev->i2c_client[dev->def_i2c_bus], &tv, dev->eedata); 2680 2681 dev->tuner_type = tv.tuner_type; 2682 2683 if (tv.audio_processor == TVEEPROM_AUDPROC_MSP) { 2684 dev->i2s_speed = 2048000; 2685 dev->board.has_msp34xx = 1; 2686 } 2687 break; 2688 } 2689 case EM2882_BOARD_KWORLD_ATSC_315U: 2690 em28xx_write_reg(dev, 0x0d, 0x42); 2691 msleep(10); 2692 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 2693 msleep(10); 2694 break; 2695 case EM2820_BOARD_KWORLD_PVRTV2800RF: 2696 /* GPIO enables sound on KWORLD PVR TV 2800RF */ 2697 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf9); 2698 break; 2699 case EM2820_BOARD_UNKNOWN: 2700 case EM2800_BOARD_UNKNOWN: 2701 /* 2702 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD. 2703 * 2704 * This occurs because they share identical USB vendor and 2705 * product IDs. 2706 * 2707 * What we do here is look up the EEPROM hash of the K-WORLD 2708 * and if it is found then we decide that we do not have 2709 * a DIGIVOX and reset the device to the K-WORLD instead. 2710 * 2711 * This solution is only valid if they do not share eeprom 2712 * hash identities which has not been determined as yet. 2713 */ 2714 case EM2880_BOARD_MSI_DIGIVOX_AD: 2715 if (!em28xx_hint_board(dev)) 2716 em28xx_set_model(dev); 2717 2718 /* In cases where we had to use a board hint, the call to 2719 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, 2720 so make the call now so the analog GPIOs are set properly 2721 before probing the i2c bus. */ 2722 em28xx_gpio_set(dev, dev->board.tuner_gpio); 2723 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 2724 break; 2725 2726 /* 2727 * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR. 2728 * 2729 * This occurs because they share identical USB vendor and 2730 * product IDs. 2731 * 2732 * What we do here is look up the EEPROM hash of the Dikom 2733 * and if it is found then we decide that we do not have 2734 * a Kworld and reset the device to the Dikom instead. 2735 * 2736 * This solution is only valid if they do not share eeprom 2737 * hash identities which has not been determined as yet. 2738 */ 2739 case EM2882_BOARD_KWORLD_VS_DVBT: 2740 if (!em28xx_hint_board(dev)) 2741 em28xx_set_model(dev); 2742 2743 /* In cases where we had to use a board hint, the call to 2744 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, 2745 so make the call now so the analog GPIOs are set properly 2746 before probing the i2c bus. */ 2747 em28xx_gpio_set(dev, dev->board.tuner_gpio); 2748 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 2749 break; 2750 } 2751 2752 if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) { 2753 em28xx_errdev("\n\n"); 2754 em28xx_errdev("The support for this board weren't " 2755 "valid yet.\n"); 2756 em28xx_errdev("Please send a report of having this working\n"); 2757 em28xx_errdev("not to V4L mailing list (and/or to other " 2758 "addresses)\n\n"); 2759 } 2760 2761 /* Free eeprom data memory */ 2762 kfree(dev->eedata); 2763 dev->eedata = NULL; 2764 2765 /* Allow override tuner type by a module parameter */ 2766 if (tuner >= 0) 2767 dev->tuner_type = tuner; 2768 } 2769 2770 void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) 2771 { 2772 memset(ctl, 0, sizeof(*ctl)); 2773 2774 ctl->fname = XC2028_DEFAULT_FIRMWARE; 2775 ctl->max_len = 64; 2776 ctl->mts = em28xx_boards[dev->model].mts_firmware; 2777 2778 switch (dev->model) { 2779 case EM2880_BOARD_EMPIRE_DUAL_TV: 2780 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: 2781 case EM2882_BOARD_TERRATEC_HYBRID_XS: 2782 ctl->demod = XC3028_FE_ZARLINK456; 2783 break; 2784 case EM2880_BOARD_TERRATEC_HYBRID_XS: 2785 case EM2880_BOARD_TERRATEC_HYBRID_XS_FR: 2786 case EM2881_BOARD_PINNACLE_HYBRID_PRO: 2787 ctl->demod = XC3028_FE_ZARLINK456; 2788 break; 2789 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: 2790 case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E: 2791 ctl->demod = XC3028_FE_DEFAULT; 2792 break; 2793 case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600: 2794 ctl->demod = XC3028_FE_DEFAULT; 2795 ctl->fname = XC3028L_DEFAULT_FIRMWARE; 2796 break; 2797 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: 2798 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: 2799 case EM2880_BOARD_PINNACLE_PCTV_HD_PRO: 2800 /* FIXME: Better to specify the needed IF */ 2801 ctl->demod = XC3028_FE_DEFAULT; 2802 break; 2803 case EM2883_BOARD_KWORLD_HYBRID_330U: 2804 case EM2882_BOARD_DIKOM_DK300: 2805 case EM2882_BOARD_KWORLD_VS_DVBT: 2806 ctl->demod = XC3028_FE_CHINA; 2807 ctl->fname = XC2028_DEFAULT_FIRMWARE; 2808 break; 2809 case EM2882_BOARD_EVGA_INDTUBE: 2810 ctl->demod = XC3028_FE_CHINA; 2811 ctl->fname = XC3028L_DEFAULT_FIRMWARE; 2812 break; 2813 default: 2814 ctl->demod = XC3028_FE_OREN538; 2815 } 2816 } 2817 EXPORT_SYMBOL_GPL(em28xx_setup_xc3028); 2818 2819 static void request_module_async(struct work_struct *work) 2820 { 2821 struct em28xx *dev = container_of(work, 2822 struct em28xx, request_module_wk); 2823 2824 /* 2825 * The em28xx extensions can be modules or builtin. If the 2826 * modules are already loaded or are built in, those extensions 2827 * can be initialised right now. Otherwise, the module init 2828 * code will do it. 2829 */ 2830 2831 /* 2832 * Devicdes with an audio-only interface also have a V4L/DVB/RC 2833 * interface. Don't register extensions twice on those devices. 2834 */ 2835 if (dev->is_audio_only) { 2836 #if defined(CONFIG_MODULES) && defined(MODULE) 2837 request_module("em28xx-alsa"); 2838 #endif 2839 return; 2840 } 2841 2842 em28xx_init_extension(dev); 2843 2844 #if defined(CONFIG_MODULES) && defined(MODULE) 2845 if (dev->has_video) 2846 request_module("em28xx-v4l"); 2847 if (dev->has_audio_class) 2848 request_module("snd-usb-audio"); 2849 else if (dev->has_alsa_audio) 2850 request_module("em28xx-alsa"); 2851 if (dev->board.has_dvb) 2852 request_module("em28xx-dvb"); 2853 if (dev->board.buttons || 2854 ((dev->board.ir_codes || dev->board.has_ir_i2c) && !disable_ir)) 2855 request_module("em28xx-rc"); 2856 #endif /* CONFIG_MODULES */ 2857 } 2858 2859 static void request_modules(struct em28xx *dev) 2860 { 2861 INIT_WORK(&dev->request_module_wk, request_module_async); 2862 schedule_work(&dev->request_module_wk); 2863 } 2864 2865 static void flush_request_modules(struct em28xx *dev) 2866 { 2867 flush_work(&dev->request_module_wk); 2868 } 2869 2870 /* 2871 * em28xx_release_resources() 2872 * unregisters the v4l2,i2c and usb devices 2873 * called when the device gets disconnected or at module unload 2874 */ 2875 void em28xx_release_resources(struct em28xx *dev) 2876 { 2877 /*FIXME: I2C IR should be disconnected */ 2878 2879 mutex_lock(&dev->lock); 2880 2881 if (dev->def_i2c_bus) 2882 em28xx_i2c_unregister(dev, 1); 2883 em28xx_i2c_unregister(dev, 0); 2884 2885 usb_put_dev(dev->udev); 2886 2887 /* Mark device as unused */ 2888 clear_bit(dev->devno, em28xx_devused); 2889 2890 mutex_unlock(&dev->lock); 2891 }; 2892 EXPORT_SYMBOL_GPL(em28xx_release_resources); 2893 2894 /* 2895 * em28xx_init_dev() 2896 * allocates and inits the device structs, registers i2c bus and v4l device 2897 */ 2898 static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, 2899 struct usb_interface *interface, 2900 int minor) 2901 { 2902 int retval; 2903 static const char *default_chip_name = "em28xx"; 2904 const char *chip_name = default_chip_name; 2905 2906 dev->udev = udev; 2907 mutex_init(&dev->vb_queue_lock); 2908 mutex_init(&dev->vb_vbi_queue_lock); 2909 mutex_init(&dev->ctrl_urb_lock); 2910 spin_lock_init(&dev->slock); 2911 2912 dev->em28xx_write_regs = em28xx_write_regs; 2913 dev->em28xx_read_reg = em28xx_read_reg; 2914 dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len; 2915 dev->em28xx_write_regs_req = em28xx_write_regs_req; 2916 dev->em28xx_read_reg_req = em28xx_read_reg_req; 2917 dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800; 2918 2919 em28xx_set_model(dev); 2920 2921 dev->wait_after_write = 5; 2922 2923 /* Based on the Chip ID, set the device configuration */ 2924 retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID); 2925 if (retval > 0) { 2926 dev->chip_id = retval; 2927 2928 switch (dev->chip_id) { 2929 case CHIP_ID_EM2800: 2930 chip_name = "em2800"; 2931 break; 2932 case CHIP_ID_EM2710: 2933 chip_name = "em2710"; 2934 break; 2935 case CHIP_ID_EM2750: 2936 chip_name = "em2750"; 2937 break; 2938 case CHIP_ID_EM2765: 2939 chip_name = "em2765"; 2940 dev->wait_after_write = 0; 2941 dev->is_em25xx = 1; 2942 dev->eeprom_addrwidth_16bit = 1; 2943 break; 2944 case CHIP_ID_EM2820: 2945 chip_name = "em2710/2820"; 2946 if (le16_to_cpu(dev->udev->descriptor.idVendor) 2947 == 0xeb1a) { 2948 __le16 idProd = dev->udev->descriptor.idProduct; 2949 if (le16_to_cpu(idProd) == 0x2710) 2950 chip_name = "em2710"; 2951 else if (le16_to_cpu(idProd) == 0x2820) 2952 chip_name = "em2820"; 2953 } 2954 /* NOTE: the em2820 is used in webcams, too ! */ 2955 break; 2956 case CHIP_ID_EM2840: 2957 chip_name = "em2840"; 2958 break; 2959 case CHIP_ID_EM2860: 2960 chip_name = "em2860"; 2961 break; 2962 case CHIP_ID_EM2870: 2963 chip_name = "em2870"; 2964 dev->wait_after_write = 0; 2965 break; 2966 case CHIP_ID_EM2874: 2967 chip_name = "em2874"; 2968 dev->wait_after_write = 0; 2969 dev->eeprom_addrwidth_16bit = 1; 2970 break; 2971 case CHIP_ID_EM28174: 2972 chip_name = "em28174"; 2973 dev->wait_after_write = 0; 2974 dev->eeprom_addrwidth_16bit = 1; 2975 break; 2976 case CHIP_ID_EM28178: 2977 chip_name = "em28178"; 2978 dev->wait_after_write = 0; 2979 dev->eeprom_addrwidth_16bit = 1; 2980 break; 2981 case CHIP_ID_EM2883: 2982 chip_name = "em2882/3"; 2983 dev->wait_after_write = 0; 2984 break; 2985 case CHIP_ID_EM2884: 2986 chip_name = "em2884"; 2987 dev->wait_after_write = 0; 2988 dev->eeprom_addrwidth_16bit = 1; 2989 break; 2990 default: 2991 printk(KERN_INFO DRIVER_NAME 2992 ": unknown em28xx chip ID (%d)\n", dev->chip_id); 2993 } 2994 } 2995 2996 if (dev->chip_id == CHIP_ID_EM2870 || 2997 dev->chip_id == CHIP_ID_EM2874 || 2998 dev->chip_id == CHIP_ID_EM28174 || 2999 dev->chip_id == CHIP_ID_EM28178) { 3000 /* Digital only device - don't load any alsa module */ 3001 dev->audio_mode.has_audio = false; 3002 dev->has_audio_class = false; 3003 dev->has_alsa_audio = false; 3004 } 3005 3006 if (chip_name != default_chip_name) 3007 printk(KERN_INFO DRIVER_NAME 3008 ": chip ID is %s\n", chip_name); 3009 3010 /* 3011 * For em2820/em2710, the name may change latter, after checking 3012 * if the device has a sensor (so, it is em2710) or not. 3013 */ 3014 snprintf(dev->name, sizeof(dev->name), "%s #%d", chip_name, dev->devno); 3015 3016 if (dev->is_audio_only) { 3017 retval = em28xx_audio_setup(dev); 3018 if (retval) 3019 return -ENODEV; 3020 em28xx_init_extension(dev); 3021 3022 return 0; 3023 } 3024 3025 em28xx_pre_card_setup(dev); 3026 3027 if (!dev->board.is_em2800) { 3028 /* Resets I2C speed */ 3029 retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed); 3030 if (retval < 0) { 3031 em28xx_errdev("%s: em28xx_write_reg failed!" 3032 " retval [%d]\n", 3033 __func__, retval); 3034 return retval; 3035 } 3036 } 3037 3038 rt_mutex_init(&dev->i2c_bus_lock); 3039 3040 /* register i2c bus 0 */ 3041 if (dev->board.is_em2800) 3042 retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM2800); 3043 else 3044 retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM28XX); 3045 if (retval < 0) { 3046 em28xx_errdev("%s: em28xx_i2c_register bus 0 - error [%d]!\n", 3047 __func__, retval); 3048 return retval; 3049 } 3050 3051 /* register i2c bus 1 */ 3052 if (dev->def_i2c_bus) { 3053 if (dev->is_em25xx) 3054 retval = em28xx_i2c_register(dev, 1, 3055 EM28XX_I2C_ALGO_EM25XX_BUS_B); 3056 else 3057 retval = em28xx_i2c_register(dev, 1, 3058 EM28XX_I2C_ALGO_EM28XX); 3059 if (retval < 0) { 3060 em28xx_errdev("%s: em28xx_i2c_register bus 1 - error [%d]!\n", 3061 __func__, retval); 3062 3063 em28xx_i2c_unregister(dev, 0); 3064 3065 return retval; 3066 } 3067 } 3068 3069 /* Do board specific init and eeprom reading */ 3070 em28xx_card_setup(dev); 3071 3072 return 0; 3073 } 3074 3075 /* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */ 3076 #define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) 3077 3078 /* 3079 * em28xx_usb_probe() 3080 * checks for supported devices 3081 */ 3082 static int em28xx_usb_probe(struct usb_interface *interface, 3083 const struct usb_device_id *id) 3084 { 3085 struct usb_device *udev; 3086 struct em28xx *dev = NULL; 3087 int retval; 3088 bool has_audio = false, has_video = false, has_dvb = false; 3089 int i, nr, try_bulk; 3090 const int ifnum = interface->altsetting[0].desc.bInterfaceNumber; 3091 char *speed; 3092 3093 udev = usb_get_dev(interface_to_usbdev(interface)); 3094 3095 /* Check to see next free device and mark as used */ 3096 do { 3097 nr = find_first_zero_bit(em28xx_devused, EM28XX_MAXBOARDS); 3098 if (nr >= EM28XX_MAXBOARDS) { 3099 /* No free device slots */ 3100 printk(DRIVER_NAME ": Supports only %i em28xx boards.\n", 3101 EM28XX_MAXBOARDS); 3102 retval = -ENOMEM; 3103 goto err_no_slot; 3104 } 3105 } while (test_and_set_bit(nr, em28xx_devused)); 3106 3107 /* Don't register audio interfaces */ 3108 if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { 3109 em28xx_err(DRIVER_NAME " audio device (%04x:%04x): " 3110 "interface %i, class %i\n", 3111 le16_to_cpu(udev->descriptor.idVendor), 3112 le16_to_cpu(udev->descriptor.idProduct), 3113 ifnum, 3114 interface->altsetting[0].desc.bInterfaceClass); 3115 3116 retval = -ENODEV; 3117 goto err; 3118 } 3119 3120 /* allocate memory for our device state and initialize it */ 3121 dev = kzalloc(sizeof(*dev), GFP_KERNEL); 3122 if (dev == NULL) { 3123 em28xx_err(DRIVER_NAME ": out of memory!\n"); 3124 retval = -ENOMEM; 3125 goto err; 3126 } 3127 3128 /* compute alternate max packet sizes */ 3129 dev->alt_max_pkt_size_isoc = 3130 kmalloc(sizeof(dev->alt_max_pkt_size_isoc[0]) * 3131 interface->num_altsetting, GFP_KERNEL); 3132 if (dev->alt_max_pkt_size_isoc == NULL) { 3133 em28xx_errdev("out of memory!\n"); 3134 kfree(dev); 3135 retval = -ENOMEM; 3136 goto err; 3137 } 3138 3139 /* Get endpoints */ 3140 for (i = 0; i < interface->num_altsetting; i++) { 3141 int ep; 3142 3143 for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) { 3144 const struct usb_endpoint_descriptor *e; 3145 int sizedescr, size; 3146 3147 e = &interface->altsetting[i].endpoint[ep].desc; 3148 3149 sizedescr = le16_to_cpu(e->wMaxPacketSize); 3150 size = sizedescr & 0x7ff; 3151 3152 if (udev->speed == USB_SPEED_HIGH) 3153 size = size * hb_mult(sizedescr); 3154 3155 if (usb_endpoint_dir_in(e)) { 3156 switch (e->bEndpointAddress) { 3157 case 0x82: 3158 has_video = true; 3159 if (usb_endpoint_xfer_isoc(e)) { 3160 dev->analog_ep_isoc = 3161 e->bEndpointAddress; 3162 dev->alt_max_pkt_size_isoc[i] = size; 3163 } else if (usb_endpoint_xfer_bulk(e)) { 3164 dev->analog_ep_bulk = 3165 e->bEndpointAddress; 3166 } 3167 break; 3168 case 0x83: 3169 if (usb_endpoint_xfer_isoc(e)) { 3170 has_audio = true; 3171 } else { 3172 printk(KERN_INFO DRIVER_NAME 3173 ": error: skipping audio endpoint 0x83, because it uses bulk transfers !\n"); 3174 } 3175 break; 3176 case 0x84: 3177 if (has_video && 3178 (usb_endpoint_xfer_bulk(e))) { 3179 dev->analog_ep_bulk = 3180 e->bEndpointAddress; 3181 } else { 3182 if (usb_endpoint_xfer_isoc(e)) { 3183 if (size > dev->dvb_max_pkt_size_isoc) { 3184 has_dvb = true; /* see NOTE (~) */ 3185 dev->dvb_ep_isoc = e->bEndpointAddress; 3186 dev->dvb_max_pkt_size_isoc = size; 3187 dev->dvb_alt_isoc = i; 3188 } 3189 } else { 3190 has_dvb = true; 3191 dev->dvb_ep_bulk = e->bEndpointAddress; 3192 } 3193 } 3194 break; 3195 } 3196 } 3197 /* NOTE: 3198 * Old logic with support for isoc transfers only was: 3199 * 0x82 isoc => analog 3200 * 0x83 isoc => audio 3201 * 0x84 isoc => digital 3202 * 3203 * New logic with support for bulk transfers 3204 * 0x82 isoc => analog 3205 * 0x82 bulk => analog 3206 * 0x83 isoc* => audio 3207 * 0x84 isoc => digital 3208 * 0x84 bulk => analog or digital** 3209 * (*: audio should always be isoc) 3210 * (**: analog, if ep 0x82 is isoc, otherwise digital) 3211 * 3212 * The new logic preserves backwards compatibility and 3213 * reflects the endpoint configurations we have seen 3214 * so far. But there might be devices for which this 3215 * logic is not sufficient... 3216 */ 3217 /* 3218 * NOTE (~): some manufacturers (e.g. Terratec) disable 3219 * endpoints by setting wMaxPacketSize to 0 bytes for 3220 * all alt settings. So far, we've seen this for 3221 * DVB isoc endpoints only. 3222 */ 3223 } 3224 } 3225 3226 if (!(has_audio || has_video || has_dvb)) { 3227 retval = -ENODEV; 3228 goto err_free; 3229 } 3230 3231 switch (udev->speed) { 3232 case USB_SPEED_LOW: 3233 speed = "1.5"; 3234 break; 3235 case USB_SPEED_UNKNOWN: 3236 case USB_SPEED_FULL: 3237 speed = "12"; 3238 break; 3239 case USB_SPEED_HIGH: 3240 speed = "480"; 3241 break; 3242 default: 3243 speed = "unknown"; 3244 } 3245 3246 printk(KERN_INFO DRIVER_NAME 3247 ": New device %s %s @ %s Mbps " 3248 "(%04x:%04x, interface %d, class %d)\n", 3249 udev->manufacturer ? udev->manufacturer : "", 3250 udev->product ? udev->product : "", 3251 speed, 3252 le16_to_cpu(udev->descriptor.idVendor), 3253 le16_to_cpu(udev->descriptor.idProduct), 3254 ifnum, 3255 interface->altsetting->desc.bInterfaceNumber); 3256 3257 /* 3258 * Make sure we have 480 Mbps of bandwidth, otherwise things like 3259 * video stream wouldn't likely work, since 12 Mbps is generally 3260 * not enough even for most Digital TV streams. 3261 */ 3262 if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) { 3263 printk(DRIVER_NAME ": Device initialization failed.\n"); 3264 printk(DRIVER_NAME ": Device must be connected to a high-speed" 3265 " USB 2.0 port.\n"); 3266 retval = -ENODEV; 3267 goto err_free; 3268 } 3269 3270 dev->devno = nr; 3271 dev->model = id->driver_info; 3272 dev->alt = -1; 3273 dev->is_audio_only = has_audio && !(has_video || has_dvb); 3274 dev->has_alsa_audio = has_audio; 3275 dev->audio_mode.has_audio = has_audio; 3276 dev->has_video = has_video; 3277 dev->ifnum = ifnum; 3278 3279 /* Checks if audio is provided by some interface */ 3280 for (i = 0; i < udev->config->desc.bNumInterfaces; i++) { 3281 struct usb_interface *uif = udev->config->interface[i]; 3282 if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { 3283 dev->has_audio_class = 1; 3284 break; 3285 } 3286 } 3287 3288 if (has_audio) 3289 printk(KERN_INFO DRIVER_NAME 3290 ": Audio interface %i found %s\n", 3291 ifnum, 3292 dev->has_audio_class ? "(USB Audio Class)" : "(Vendor Class)"); 3293 if (has_video) 3294 printk(KERN_INFO DRIVER_NAME 3295 ": Video interface %i found:%s%s\n", 3296 ifnum, 3297 dev->analog_ep_bulk ? " bulk" : "", 3298 dev->analog_ep_isoc ? " isoc" : ""); 3299 if (has_dvb) 3300 printk(KERN_INFO DRIVER_NAME 3301 ": DVB interface %i found:%s%s\n", 3302 ifnum, 3303 dev->dvb_ep_bulk ? " bulk" : "", 3304 dev->dvb_ep_isoc ? " isoc" : ""); 3305 3306 dev->num_alt = interface->num_altsetting; 3307 3308 if ((unsigned)card[nr] < em28xx_bcount) 3309 dev->model = card[nr]; 3310 3311 /* save our data pointer in this interface device */ 3312 usb_set_intfdata(interface, dev); 3313 3314 /* allocate device struct */ 3315 mutex_init(&dev->lock); 3316 retval = em28xx_init_dev(dev, udev, interface, nr); 3317 if (retval) { 3318 goto err_free; 3319 } 3320 3321 if (usb_xfer_mode < 0) { 3322 if (dev->board.is_webcam) 3323 try_bulk = 1; 3324 else 3325 try_bulk = 0; 3326 } else { 3327 try_bulk = usb_xfer_mode > 0; 3328 } 3329 3330 /* Select USB transfer types to use */ 3331 if (has_video) { 3332 if (!dev->analog_ep_isoc || (try_bulk && dev->analog_ep_bulk)) 3333 dev->analog_xfer_bulk = 1; 3334 em28xx_info("analog set to %s mode.\n", 3335 dev->analog_xfer_bulk ? "bulk" : "isoc"); 3336 } 3337 if (has_dvb) { 3338 if (!dev->dvb_ep_isoc || (try_bulk && dev->dvb_ep_bulk)) 3339 dev->dvb_xfer_bulk = 1; 3340 3341 em28xx_info("dvb set to %s mode.\n", 3342 dev->dvb_xfer_bulk ? "bulk" : "isoc"); 3343 } 3344 3345 request_modules(dev); 3346 3347 /* Should be the last thing to do, to avoid newer udev's to 3348 open the device before fully initializing it 3349 */ 3350 3351 return 0; 3352 3353 err_free: 3354 kfree(dev->alt_max_pkt_size_isoc); 3355 kfree(dev); 3356 3357 err: 3358 clear_bit(nr, em28xx_devused); 3359 3360 err_no_slot: 3361 usb_put_dev(udev); 3362 return retval; 3363 } 3364 3365 /* 3366 * em28xx_usb_disconnect() 3367 * called when the device gets disconnected 3368 * video device will be unregistered on v4l2_close in case it is still open 3369 */ 3370 static void em28xx_usb_disconnect(struct usb_interface *interface) 3371 { 3372 struct em28xx *dev; 3373 3374 dev = usb_get_intfdata(interface); 3375 usb_set_intfdata(interface, NULL); 3376 3377 if (!dev) 3378 return; 3379 3380 dev->disconnected = 1; 3381 3382 em28xx_info("Disconnecting %s\n", dev->name); 3383 3384 flush_request_modules(dev); 3385 3386 em28xx_close_extension(dev); 3387 3388 em28xx_release_resources(dev); 3389 3390 if (!dev->users) { 3391 kfree(dev->alt_max_pkt_size_isoc); 3392 kfree(dev); 3393 } 3394 } 3395 3396 static struct usb_driver em28xx_usb_driver = { 3397 .name = "em28xx", 3398 .probe = em28xx_usb_probe, 3399 .disconnect = em28xx_usb_disconnect, 3400 .id_table = em28xx_id_table, 3401 }; 3402 3403 module_usb_driver(em28xx_usb_driver); 3404