1 /* 2 em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB 3 video capture devices 4 5 Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it> 6 Markus Rechberger <mrechberger@gmail.com> 7 Mauro Carvalho Chehab <mchehab@infradead.org> 8 Sascha Sommer <saschasommer@freenet.de> 9 Copyright (C) 2012 Frank Schäfer <fschaefer.oss@googlemail.com> 10 11 This program is free software; you can redistribute it and/or modify 12 it under the terms of the GNU General Public License as published by 13 the Free Software Foundation; either version 2 of the License, or 14 (at your option) any later version. 15 16 This program is distributed in the hope that it will be useful, 17 but WITHOUT ANY WARRANTY; without even the implied warranty of 18 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 GNU General Public License for more details. 20 21 You should have received a copy of the GNU General Public License 22 along with this program; if not, write to the Free Software 23 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 24 */ 25 26 #include <linux/init.h> 27 #include <linux/module.h> 28 #include <linux/slab.h> 29 #include <linux/delay.h> 30 #include <linux/i2c.h> 31 #include <linux/usb.h> 32 #include <media/tuner.h> 33 #include <media/msp3400.h> 34 #include <media/saa7115.h> 35 #include <media/tvp5150.h> 36 #include <media/tvaudio.h> 37 #include <media/i2c-addr.h> 38 #include <media/tveeprom.h> 39 #include <media/v4l2-common.h> 40 #include <media/v4l2-chip-ident.h> 41 42 #include "em28xx.h" 43 44 #define DRIVER_NAME "em28xx" 45 46 static int tuner = -1; 47 module_param(tuner, int, 0444); 48 MODULE_PARM_DESC(tuner, "tuner type"); 49 50 static unsigned int disable_ir; 51 module_param(disable_ir, int, 0444); 52 MODULE_PARM_DESC(disable_ir, "disable infrared remote support"); 53 54 static unsigned int disable_usb_speed_check; 55 module_param(disable_usb_speed_check, int, 0444); 56 MODULE_PARM_DESC(disable_usb_speed_check, 57 "override min bandwidth requirement of 480M bps"); 58 59 static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U }; 60 module_param_array(card, int, NULL, 0444); 61 MODULE_PARM_DESC(card, "card type"); 62 63 static int usb_xfer_mode = -1; 64 module_param(usb_xfer_mode, int, 0444); 65 MODULE_PARM_DESC(usb_xfer_mode, 66 "USB transfer mode for frame data (-1 = auto, 0 = prefer isoc, 1 = prefer bulk)"); 67 68 69 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */ 70 static unsigned long em28xx_devused; 71 72 struct em28xx_hash_table { 73 unsigned long hash; 74 unsigned int model; 75 unsigned int tuner; 76 }; 77 78 static void em28xx_pre_card_setup(struct em28xx *dev); 79 80 /* 81 * Reset sequences for analog/digital modes 82 */ 83 84 /* Reset for the most [analog] boards */ 85 static struct em28xx_reg_seq default_analog[] = { 86 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10}, 87 { -1, -1, -1, -1}, 88 }; 89 90 /* Reset for the most [digital] boards */ 91 static struct em28xx_reg_seq default_digital[] = { 92 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10}, 93 { -1, -1, -1, -1}, 94 }; 95 96 /* Board Hauppauge WinTV HVR 900 analog */ 97 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = { 98 {EM28XX_R08_GPIO, 0x2d, ~EM_GPIO_4, 10}, 99 {0x05, 0xff, 0x10, 10}, 100 { -1, -1, -1, -1}, 101 }; 102 103 /* Board Hauppauge WinTV HVR 900 digital */ 104 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = { 105 {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10}, 106 {EM2880_R04_GPO, 0x04, 0x0f, 10}, 107 {EM2880_R04_GPO, 0x0c, 0x0f, 10}, 108 { -1, -1, -1, -1}, 109 }; 110 111 /* Board Hauppauge WinTV HVR 900 (R2) digital */ 112 static struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = { 113 {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10}, 114 {EM2880_R04_GPO, 0x0c, 0x0f, 10}, 115 { -1, -1, -1, -1}, 116 }; 117 118 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */ 119 static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = { 120 {EM28XX_R08_GPIO, 0x69, ~EM_GPIO_4, 10}, 121 { -1, -1, -1, -1}, 122 }; 123 124 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */ 125 126 /* Board - EM2870 Kworld 355u 127 Analog - No input analog */ 128 129 /* Board - EM2882 Kworld 315U digital */ 130 static struct em28xx_reg_seq em2882_kworld_315u_digital[] = { 131 {EM28XX_R08_GPIO, 0xff, 0xff, 10}, 132 {EM28XX_R08_GPIO, 0xfe, 0xff, 10}, 133 {EM2880_R04_GPO, 0x04, 0xff, 10}, 134 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 135 {EM28XX_R08_GPIO, 0x7e, 0xff, 10}, 136 { -1, -1, -1, -1}, 137 }; 138 139 static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = { 140 {EM2880_R04_GPO, 0x08, 0xff, 10}, 141 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 142 {EM2880_R04_GPO, 0x08, 0xff, 10}, 143 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 144 { -1, -1, -1, -1}, 145 }; 146 147 static struct em28xx_reg_seq kworld_330u_analog[] = { 148 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10}, 149 {EM2880_R04_GPO, 0x00, 0xff, 10}, 150 { -1, -1, -1, -1}, 151 }; 152 153 static struct em28xx_reg_seq kworld_330u_digital[] = { 154 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10}, 155 {EM2880_R04_GPO, 0x08, 0xff, 10}, 156 { -1, -1, -1, -1}, 157 }; 158 159 /* Evga inDtube 160 GPIO0 - Enable digital power (s5h1409) - low to enable 161 GPIO1 - Enable analog power (tvp5150/emp202) - low to enable 162 GPIO4 - xc3028 reset 163 GOP3 - s5h1409 reset 164 */ 165 static struct em28xx_reg_seq evga_indtube_analog[] = { 166 {EM28XX_R08_GPIO, 0x79, 0xff, 60}, 167 { -1, -1, -1, -1}, 168 }; 169 170 static struct em28xx_reg_seq evga_indtube_digital[] = { 171 {EM28XX_R08_GPIO, 0x7a, 0xff, 1}, 172 {EM2880_R04_GPO, 0x04, 0xff, 10}, 173 {EM2880_R04_GPO, 0x0c, 0xff, 1}, 174 { -1, -1, -1, -1}, 175 }; 176 177 /* 178 * KWorld PlusTV 340U and UB435-Q (ATSC) GPIOs map: 179 * EM_GPIO_0 - currently unknown 180 * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on) 181 * EM_GPIO_2 - currently unknown 182 * EM_GPIO_3 - currently unknown 183 * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset) 184 * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset) 185 * EM_GPIO_6 - currently unknown 186 * EM_GPIO_7 - currently unknown 187 */ 188 static struct em28xx_reg_seq kworld_a340_digital[] = { 189 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10}, 190 { -1, -1, -1, -1}, 191 }; 192 193 /* Pinnacle Hybrid Pro eb1a:2881 */ 194 static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = { 195 {EM28XX_R08_GPIO, 0xfd, ~EM_GPIO_4, 10}, 196 { -1, -1, -1, -1}, 197 }; 198 199 static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = { 200 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10}, 201 {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */ 202 {EM2880_R04_GPO, 0x0c, 0xff, 1}, 203 { -1, -1, -1, -1}, 204 }; 205 206 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = { 207 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10}, 208 {EM2880_R04_GPO, 0x00, 0xff, 10}, 209 { -1, -1, -1, -1}, 210 }; 211 212 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = { 213 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10}, 214 {EM2880_R04_GPO, 0x08, 0xff, 10}, 215 { -1, -1, -1, -1}, 216 }; 217 218 /* eb1a:2868 Reddo DVB-C USB TV Box 219 GPIO4 - CU1216L NIM 220 Other GPIOs seems to be don't care. */ 221 static struct em28xx_reg_seq reddo_dvb_c_usb_box[] = { 222 {EM28XX_R08_GPIO, 0xfe, 0xff, 10}, 223 {EM28XX_R08_GPIO, 0xde, 0xff, 10}, 224 {EM28XX_R08_GPIO, 0xfe, 0xff, 10}, 225 {EM28XX_R08_GPIO, 0xff, 0xff, 10}, 226 {EM28XX_R08_GPIO, 0x7f, 0xff, 10}, 227 {EM28XX_R08_GPIO, 0x6f, 0xff, 10}, 228 {EM28XX_R08_GPIO, 0xff, 0xff, 10}, 229 {-1, -1, -1, -1}, 230 }; 231 232 /* Callback for the most boards */ 233 static struct em28xx_reg_seq default_tuner_gpio[] = { 234 {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10}, 235 {EM28XX_R08_GPIO, 0, EM_GPIO_4, 10}, 236 {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10}, 237 { -1, -1, -1, -1}, 238 }; 239 240 /* Mute/unmute */ 241 static struct em28xx_reg_seq compro_unmute_tv_gpio[] = { 242 {EM28XX_R08_GPIO, 5, 7, 10}, 243 { -1, -1, -1, -1}, 244 }; 245 246 static struct em28xx_reg_seq compro_unmute_svid_gpio[] = { 247 {EM28XX_R08_GPIO, 4, 7, 10}, 248 { -1, -1, -1, -1}, 249 }; 250 251 static struct em28xx_reg_seq compro_mute_gpio[] = { 252 {EM28XX_R08_GPIO, 6, 7, 10}, 253 { -1, -1, -1, -1}, 254 }; 255 256 /* Terratec AV350 */ 257 static struct em28xx_reg_seq terratec_av350_mute_gpio[] = { 258 {EM28XX_R08_GPIO, 0xff, 0x7f, 10}, 259 { -1, -1, -1, -1}, 260 }; 261 262 static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = { 263 {EM28XX_R08_GPIO, 0xff, 0xff, 10}, 264 { -1, -1, -1, -1}, 265 }; 266 267 static struct em28xx_reg_seq silvercrest_reg_seq[] = { 268 {EM28XX_R08_GPIO, 0xff, 0xff, 10}, 269 {EM28XX_R08_GPIO, 0x01, 0xf7, 10}, 270 { -1, -1, -1, -1}, 271 }; 272 273 static struct em28xx_reg_seq vc211a_enable[] = { 274 {EM28XX_R08_GPIO, 0xff, 0x07, 10}, 275 {EM28XX_R08_GPIO, 0xff, 0x0f, 10}, 276 {EM28XX_R08_GPIO, 0xff, 0x0b, 10}, 277 { -1, -1, -1, -1}, 278 }; 279 280 static struct em28xx_reg_seq dikom_dk300_digital[] = { 281 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10}, 282 {EM2880_R04_GPO, 0x08, 0xff, 10}, 283 { -1, -1, -1, -1}, 284 }; 285 286 287 /* Reset for the most [digital] boards */ 288 static struct em28xx_reg_seq leadership_digital[] = { 289 {EM2874_R80_GPIO, 0x70, 0xff, 10}, 290 { -1, -1, -1, -1}, 291 }; 292 293 static struct em28xx_reg_seq leadership_reset[] = { 294 {EM2874_R80_GPIO, 0xf0, 0xff, 10}, 295 {EM2874_R80_GPIO, 0xb0, 0xff, 10}, 296 {EM2874_R80_GPIO, 0xf0, 0xff, 10}, 297 { -1, -1, -1, -1}, 298 }; 299 300 /* 2013:024f PCTV nanoStick T2 290e 301 * GPIO_6 - demod reset 302 * GPIO_7 - LED 303 */ 304 static struct em28xx_reg_seq pctv_290e[] = { 305 {EM2874_R80_GPIO, 0x00, 0xff, 80}, 306 {EM2874_R80_GPIO, 0x40, 0xff, 80}, /* GPIO_6 = 1 */ 307 {EM2874_R80_GPIO, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */ 308 {-1, -1, -1, -1}, 309 }; 310 311 #if 0 312 static struct em28xx_reg_seq terratec_h5_gpio[] = { 313 {EM28XX_R08_GPIO, 0xff, 0xff, 10}, 314 {EM2874_R80_GPIO, 0xf6, 0xff, 100}, 315 {EM2874_R80_GPIO, 0xf2, 0xff, 50}, 316 {EM2874_R80_GPIO, 0xf6, 0xff, 50}, 317 { -1, -1, -1, -1}, 318 }; 319 320 static struct em28xx_reg_seq terratec_h5_digital[] = { 321 {EM2874_R80_GPIO, 0xf6, 0xff, 10}, 322 {EM2874_R80_GPIO, 0xe6, 0xff, 100}, 323 {EM2874_R80_GPIO, 0xa6, 0xff, 10}, 324 { -1, -1, -1, -1}, 325 }; 326 #endif 327 328 /* 2013:024f PCTV DVB-S2 Stick 460e 329 * GPIO_0 - POWER_ON 330 * GPIO_1 - BOOST 331 * GPIO_2 - VUV_LNB (red LED) 332 * GPIO_3 - EXT_12V 333 * GPIO_4 - INT_DEM (DEMOD GPIO_0) 334 * GPIO_5 - INT_LNB 335 * GPIO_6 - RESET_DEM 336 * GPIO_7 - LED (green LED) 337 */ 338 static struct em28xx_reg_seq pctv_460e[] = { 339 {EM2874_R80_GPIO, 0x01, 0xff, 50}, 340 {0x0d, 0xff, 0xff, 50}, 341 {EM2874_R80_GPIO, 0x41, 0xff, 50}, /* GPIO_6=1 */ 342 {0x0d, 0x42, 0xff, 50}, 343 {EM2874_R80_GPIO, 0x61, 0xff, 50}, /* GPIO_5=1 */ 344 { -1, -1, -1, -1}, 345 }; 346 347 static struct em28xx_reg_seq c3tech_digital_duo_digital[] = { 348 {EM2874_R80_GPIO, 0xff, 0xff, 10}, 349 {EM2874_R80_GPIO, 0xfd, 0xff, 10}, /* xc5000 reset */ 350 {EM2874_R80_GPIO, 0xf9, 0xff, 35}, 351 {EM2874_R80_GPIO, 0xfd, 0xff, 10}, 352 {EM2874_R80_GPIO, 0xff, 0xff, 10}, 353 {EM2874_R80_GPIO, 0xfe, 0xff, 10}, 354 {EM2874_R80_GPIO, 0xbe, 0xff, 10}, 355 {EM2874_R80_GPIO, 0xfe, 0xff, 20}, 356 { -1, -1, -1, -1}, 357 }; 358 359 #if 0 360 static struct em28xx_reg_seq hauppauge_930c_gpio[] = { 361 {EM2874_R80_GPIO, 0x6f, 0xff, 10}, 362 {EM2874_R80_GPIO, 0x4f, 0xff, 10}, /* xc5000 reset */ 363 {EM2874_R80_GPIO, 0x6f, 0xff, 10}, 364 {EM2874_R80_GPIO, 0x4f, 0xff, 10}, 365 { -1, -1, -1, -1}, 366 }; 367 368 static struct em28xx_reg_seq hauppauge_930c_digital[] = { 369 {EM2874_R80_GPIO, 0xf6, 0xff, 10}, 370 {EM2874_R80_GPIO, 0xe6, 0xff, 100}, 371 {EM2874_R80_GPIO, 0xa6, 0xff, 10}, 372 { -1, -1, -1, -1}, 373 }; 374 #endif 375 376 /* 1b80:e425 MaxMedia UB425-TC 377 * GPIO_6 - demod reset, 0=active 378 * GPIO_7 - LED, 0=active 379 */ 380 static struct em28xx_reg_seq maxmedia_ub425_tc[] = { 381 {EM2874_R80_GPIO, 0x83, 0xff, 100}, 382 {EM2874_R80_GPIO, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */ 383 {EM2874_R80_GPIO, 0x43, 0xff, 000}, /* GPIO_7 = 0 */ 384 {-1, -1, -1, -1}, 385 }; 386 387 /* 2304:0242 PCTV QuatroStick (510e) 388 * GPIO_2: decoder reset, 0=active 389 * GPIO_4: decoder suspend, 0=active 390 * GPIO_6: demod reset, 0=active 391 * GPIO_7: LED, 1=active 392 */ 393 static struct em28xx_reg_seq pctv_510e[] = { 394 {EM2874_R80_GPIO, 0x10, 0xff, 100}, 395 {EM2874_R80_GPIO, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ 396 {EM2874_R80_GPIO, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ 397 { -1, -1, -1, -1}, 398 }; 399 400 /* 2013:0251 PCTV QuatroStick nano (520e) 401 * GPIO_2: decoder reset, 0=active 402 * GPIO_4: decoder suspend, 0=active 403 * GPIO_6: demod reset, 0=active 404 * GPIO_7: LED, 1=active 405 */ 406 static struct em28xx_reg_seq pctv_520e[] = { 407 {EM2874_R80_GPIO, 0x10, 0xff, 100}, 408 {EM2874_R80_GPIO, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ 409 {EM2874_R80_GPIO, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ 410 {EM2874_R80_GPIO, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */ 411 { -1, -1, -1, -1}, 412 }; 413 414 /* 415 * Board definitions 416 */ 417 struct em28xx_board em28xx_boards[] = { 418 [EM2750_BOARD_UNKNOWN] = { 419 .name = "EM2710/EM2750/EM2751 webcam grabber", 420 .xclk = EM28XX_XCLK_FREQUENCY_20MHZ, 421 .tuner_type = TUNER_ABSENT, 422 .is_webcam = 1, 423 .input = { { 424 .type = EM28XX_VMUX_COMPOSITE1, 425 .vmux = 0, 426 .amux = EM28XX_AMUX_VIDEO, 427 .gpio = silvercrest_reg_seq, 428 } }, 429 }, 430 [EM2800_BOARD_UNKNOWN] = { 431 .name = "Unknown EM2800 video grabber", 432 .is_em2800 = 1, 433 .tda9887_conf = TDA9887_PRESENT, 434 .decoder = EM28XX_SAA711X, 435 .tuner_type = TUNER_ABSENT, 436 .input = { { 437 .type = EM28XX_VMUX_COMPOSITE1, 438 .vmux = SAA7115_COMPOSITE0, 439 .amux = EM28XX_AMUX_LINE_IN, 440 }, { 441 .type = EM28XX_VMUX_SVIDEO, 442 .vmux = SAA7115_SVIDEO3, 443 .amux = EM28XX_AMUX_LINE_IN, 444 } }, 445 }, 446 [EM2820_BOARD_UNKNOWN] = { 447 .name = "Unknown EM2750/28xx video grabber", 448 .tuner_type = TUNER_ABSENT, 449 .is_webcam = 1, /* To enable sensor probe */ 450 }, 451 [EM2750_BOARD_DLCW_130] = { 452 /* Beijing Huaqi Information Digital Technology Co., Ltd */ 453 .name = "Huaqi DLCW-130", 454 .valid = EM28XX_BOARD_NOT_VALIDATED, 455 .xclk = EM28XX_XCLK_FREQUENCY_48MHZ, 456 .tuner_type = TUNER_ABSENT, 457 .is_webcam = 1, 458 .input = { { 459 .type = EM28XX_VMUX_COMPOSITE1, 460 .vmux = 0, 461 .amux = EM28XX_AMUX_VIDEO, 462 } }, 463 }, 464 [EM2820_BOARD_KWORLD_PVRTV2800RF] = { 465 .name = "Kworld PVR TV 2800 RF", 466 .tuner_type = TUNER_TEMIC_PAL, 467 .tda9887_conf = TDA9887_PRESENT, 468 .decoder = EM28XX_SAA711X, 469 .input = { { 470 .type = EM28XX_VMUX_COMPOSITE1, 471 .vmux = SAA7115_COMPOSITE0, 472 .amux = EM28XX_AMUX_LINE_IN, 473 }, { 474 .type = EM28XX_VMUX_SVIDEO, 475 .vmux = SAA7115_SVIDEO3, 476 .amux = EM28XX_AMUX_LINE_IN, 477 } }, 478 }, 479 [EM2820_BOARD_GADMEI_TVR200] = { 480 .name = "Gadmei TVR200", 481 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 482 .tda9887_conf = TDA9887_PRESENT, 483 .decoder = EM28XX_SAA711X, 484 .input = { { 485 .type = EM28XX_VMUX_TELEVISION, 486 .vmux = SAA7115_COMPOSITE2, 487 .amux = EM28XX_AMUX_LINE_IN, 488 }, { 489 .type = EM28XX_VMUX_COMPOSITE1, 490 .vmux = SAA7115_COMPOSITE0, 491 .amux = EM28XX_AMUX_LINE_IN, 492 }, { 493 .type = EM28XX_VMUX_SVIDEO, 494 .vmux = SAA7115_SVIDEO3, 495 .amux = EM28XX_AMUX_LINE_IN, 496 } }, 497 }, 498 [EM2820_BOARD_TERRATEC_CINERGY_250] = { 499 .name = "Terratec Cinergy 250 USB", 500 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 501 .has_ir_i2c = 1, 502 .tda9887_conf = TDA9887_PRESENT, 503 .decoder = EM28XX_SAA711X, 504 .input = { { 505 .type = EM28XX_VMUX_TELEVISION, 506 .vmux = SAA7115_COMPOSITE2, 507 .amux = EM28XX_AMUX_VIDEO, 508 }, { 509 .type = EM28XX_VMUX_COMPOSITE1, 510 .vmux = SAA7115_COMPOSITE0, 511 .amux = EM28XX_AMUX_LINE_IN, 512 }, { 513 .type = EM28XX_VMUX_SVIDEO, 514 .vmux = SAA7115_SVIDEO3, 515 .amux = EM28XX_AMUX_LINE_IN, 516 } }, 517 }, 518 [EM2820_BOARD_PINNACLE_USB_2] = { 519 .name = "Pinnacle PCTV USB 2", 520 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 521 .has_ir_i2c = 1, 522 .tda9887_conf = TDA9887_PRESENT, 523 .decoder = EM28XX_SAA711X, 524 .input = { { 525 .type = EM28XX_VMUX_TELEVISION, 526 .vmux = SAA7115_COMPOSITE2, 527 .amux = EM28XX_AMUX_VIDEO, 528 }, { 529 .type = EM28XX_VMUX_COMPOSITE1, 530 .vmux = SAA7115_COMPOSITE0, 531 .amux = EM28XX_AMUX_LINE_IN, 532 }, { 533 .type = EM28XX_VMUX_SVIDEO, 534 .vmux = SAA7115_SVIDEO3, 535 .amux = EM28XX_AMUX_LINE_IN, 536 } }, 537 }, 538 [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = { 539 .name = "Hauppauge WinTV USB 2", 540 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 541 .tda9887_conf = TDA9887_PRESENT | 542 TDA9887_PORT1_ACTIVE | 543 TDA9887_PORT2_ACTIVE, 544 .decoder = EM28XX_TVP5150, 545 .has_msp34xx = 1, 546 .has_ir_i2c = 1, 547 .input = { { 548 .type = EM28XX_VMUX_TELEVISION, 549 .vmux = TVP5150_COMPOSITE0, 550 .amux = MSP_INPUT_DEFAULT, 551 }, { 552 .type = EM28XX_VMUX_SVIDEO, 553 .vmux = TVP5150_SVIDEO, 554 .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1, 555 MSP_DSP_IN_SCART, MSP_DSP_IN_SCART), 556 } }, 557 }, 558 [EM2820_BOARD_DLINK_USB_TV] = { 559 .name = "D-Link DUB-T210 TV Tuner", 560 .valid = EM28XX_BOARD_NOT_VALIDATED, 561 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 562 .tda9887_conf = TDA9887_PRESENT, 563 .decoder = EM28XX_SAA711X, 564 .input = { { 565 .type = EM28XX_VMUX_TELEVISION, 566 .vmux = SAA7115_COMPOSITE2, 567 .amux = EM28XX_AMUX_LINE_IN, 568 }, { 569 .type = EM28XX_VMUX_COMPOSITE1, 570 .vmux = SAA7115_COMPOSITE0, 571 .amux = EM28XX_AMUX_LINE_IN, 572 }, { 573 .type = EM28XX_VMUX_SVIDEO, 574 .vmux = SAA7115_SVIDEO3, 575 .amux = EM28XX_AMUX_LINE_IN, 576 } }, 577 }, 578 [EM2820_BOARD_HERCULES_SMART_TV_USB2] = { 579 .name = "Hercules Smart TV USB 2.0", 580 .valid = EM28XX_BOARD_NOT_VALIDATED, 581 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 582 .tda9887_conf = TDA9887_PRESENT, 583 .decoder = EM28XX_SAA711X, 584 .input = { { 585 .type = EM28XX_VMUX_TELEVISION, 586 .vmux = SAA7115_COMPOSITE2, 587 .amux = EM28XX_AMUX_LINE_IN, 588 }, { 589 .type = EM28XX_VMUX_COMPOSITE1, 590 .vmux = SAA7115_COMPOSITE0, 591 .amux = EM28XX_AMUX_LINE_IN, 592 }, { 593 .type = EM28XX_VMUX_SVIDEO, 594 .vmux = SAA7115_SVIDEO3, 595 .amux = EM28XX_AMUX_LINE_IN, 596 } }, 597 }, 598 [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = { 599 .name = "Pinnacle PCTV USB 2 (Philips FM1216ME)", 600 .valid = EM28XX_BOARD_NOT_VALIDATED, 601 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, 602 .tda9887_conf = TDA9887_PRESENT, 603 .decoder = EM28XX_SAA711X, 604 .input = { { 605 .type = EM28XX_VMUX_TELEVISION, 606 .vmux = SAA7115_COMPOSITE2, 607 .amux = EM28XX_AMUX_VIDEO, 608 }, { 609 .type = EM28XX_VMUX_COMPOSITE1, 610 .vmux = SAA7115_COMPOSITE0, 611 .amux = EM28XX_AMUX_LINE_IN, 612 }, { 613 .type = EM28XX_VMUX_SVIDEO, 614 .vmux = SAA7115_SVIDEO3, 615 .amux = EM28XX_AMUX_LINE_IN, 616 } }, 617 }, 618 [EM2820_BOARD_GADMEI_UTV310] = { 619 .name = "Gadmei UTV310", 620 .valid = EM28XX_BOARD_NOT_VALIDATED, 621 .tuner_type = TUNER_TNF_5335MF, 622 .tda9887_conf = TDA9887_PRESENT, 623 .decoder = EM28XX_SAA711X, 624 .input = { { 625 .type = EM28XX_VMUX_TELEVISION, 626 .vmux = SAA7115_COMPOSITE1, 627 .amux = EM28XX_AMUX_LINE_IN, 628 }, { 629 .type = EM28XX_VMUX_COMPOSITE1, 630 .vmux = SAA7115_COMPOSITE0, 631 .amux = EM28XX_AMUX_LINE_IN, 632 }, { 633 .type = EM28XX_VMUX_SVIDEO, 634 .vmux = SAA7115_SVIDEO3, 635 .amux = EM28XX_AMUX_LINE_IN, 636 } }, 637 }, 638 [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = { 639 .name = "Leadtek Winfast USB II Deluxe", 640 .valid = EM28XX_BOARD_NOT_VALIDATED, 641 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, 642 .has_ir_i2c = 1, 643 .tvaudio_addr = 0x58, 644 .tda9887_conf = TDA9887_PRESENT | 645 TDA9887_PORT2_ACTIVE | 646 TDA9887_QSS, 647 .decoder = EM28XX_SAA711X, 648 .adecoder = EM28XX_TVAUDIO, 649 .input = { { 650 .type = EM28XX_VMUX_TELEVISION, 651 .vmux = SAA7115_COMPOSITE4, 652 .amux = EM28XX_AMUX_AUX, 653 }, { 654 .type = EM28XX_VMUX_COMPOSITE1, 655 .vmux = SAA7115_COMPOSITE5, 656 .amux = EM28XX_AMUX_LINE_IN, 657 }, { 658 .type = EM28XX_VMUX_SVIDEO, 659 .vmux = SAA7115_SVIDEO3, 660 .amux = EM28XX_AMUX_LINE_IN, 661 } }, 662 .radio = { 663 .type = EM28XX_RADIO, 664 .amux = EM28XX_AMUX_AUX, 665 } 666 }, 667 [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = { 668 .name = "Videology 20K14XUSB USB2.0", 669 .valid = EM28XX_BOARD_NOT_VALIDATED, 670 .tuner_type = TUNER_ABSENT, 671 .is_webcam = 1, 672 .input = { { 673 .type = EM28XX_VMUX_COMPOSITE1, 674 .vmux = 0, 675 .amux = EM28XX_AMUX_VIDEO, 676 } }, 677 }, 678 [EM2820_BOARD_SILVERCREST_WEBCAM] = { 679 .name = "Silvercrest Webcam 1.3mpix", 680 .tuner_type = TUNER_ABSENT, 681 .is_webcam = 1, 682 .input = { { 683 .type = EM28XX_VMUX_COMPOSITE1, 684 .vmux = 0, 685 .amux = EM28XX_AMUX_VIDEO, 686 .gpio = silvercrest_reg_seq, 687 } }, 688 }, 689 [EM2821_BOARD_SUPERCOMP_USB_2] = { 690 .name = "Supercomp USB 2.0 TV", 691 .valid = EM28XX_BOARD_NOT_VALIDATED, 692 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 693 .tda9887_conf = TDA9887_PRESENT | 694 TDA9887_PORT1_ACTIVE | 695 TDA9887_PORT2_ACTIVE, 696 .decoder = EM28XX_SAA711X, 697 .input = { { 698 .type = EM28XX_VMUX_TELEVISION, 699 .vmux = SAA7115_COMPOSITE2, 700 .amux = EM28XX_AMUX_LINE_IN, 701 }, { 702 .type = EM28XX_VMUX_COMPOSITE1, 703 .vmux = SAA7115_COMPOSITE0, 704 .amux = EM28XX_AMUX_VIDEO, 705 }, { 706 .type = EM28XX_VMUX_SVIDEO, 707 .vmux = SAA7115_SVIDEO3, 708 .amux = EM28XX_AMUX_LINE_IN, 709 } }, 710 }, 711 [EM2821_BOARD_USBGEAR_VD204] = { 712 .name = "Usbgear VD204v9", 713 .valid = EM28XX_BOARD_NOT_VALIDATED, 714 .tuner_type = TUNER_ABSENT, /* Capture only device */ 715 .decoder = EM28XX_SAA711X, 716 .input = { { 717 .type = EM28XX_VMUX_COMPOSITE1, 718 .vmux = SAA7115_COMPOSITE0, 719 .amux = EM28XX_AMUX_LINE_IN, 720 }, { 721 .type = EM28XX_VMUX_SVIDEO, 722 .vmux = SAA7115_SVIDEO3, 723 .amux = EM28XX_AMUX_LINE_IN, 724 } }, 725 }, 726 [EM2860_BOARD_NETGMBH_CAM] = { 727 /* Beijing Huaqi Information Digital Technology Co., Ltd */ 728 .name = "NetGMBH Cam", 729 .valid = EM28XX_BOARD_NOT_VALIDATED, 730 .tuner_type = TUNER_ABSENT, 731 .is_webcam = 1, 732 .input = { { 733 .type = EM28XX_VMUX_COMPOSITE1, 734 .vmux = 0, 735 .amux = EM28XX_AMUX_VIDEO, 736 } }, 737 }, 738 [EM2860_BOARD_TYPHOON_DVD_MAKER] = { 739 .name = "Typhoon DVD Maker", 740 .decoder = EM28XX_SAA711X, 741 .tuner_type = TUNER_ABSENT, /* Capture only device */ 742 .input = { { 743 .type = EM28XX_VMUX_COMPOSITE1, 744 .vmux = SAA7115_COMPOSITE0, 745 .amux = EM28XX_AMUX_LINE_IN, 746 }, { 747 .type = EM28XX_VMUX_SVIDEO, 748 .vmux = SAA7115_SVIDEO3, 749 .amux = EM28XX_AMUX_LINE_IN, 750 } }, 751 }, 752 [EM2860_BOARD_GADMEI_UTV330] = { 753 .name = "Gadmei UTV330", 754 .valid = EM28XX_BOARD_NOT_VALIDATED, 755 .tuner_type = TUNER_TNF_5335MF, 756 .tda9887_conf = TDA9887_PRESENT, 757 .decoder = EM28XX_SAA711X, 758 .input = { { 759 .type = EM28XX_VMUX_TELEVISION, 760 .vmux = SAA7115_COMPOSITE2, 761 .amux = EM28XX_AMUX_VIDEO, 762 }, { 763 .type = EM28XX_VMUX_COMPOSITE1, 764 .vmux = SAA7115_COMPOSITE0, 765 .amux = EM28XX_AMUX_LINE_IN, 766 }, { 767 .type = EM28XX_VMUX_SVIDEO, 768 .vmux = SAA7115_SVIDEO3, 769 .amux = EM28XX_AMUX_LINE_IN, 770 } }, 771 }, 772 [EM2861_BOARD_GADMEI_UTV330PLUS] = { 773 .name = "Gadmei UTV330+", 774 .tuner_type = TUNER_TNF_5335MF, 775 .tda9887_conf = TDA9887_PRESENT, 776 .ir_codes = RC_MAP_GADMEI_RM008Z, 777 .decoder = EM28XX_SAA711X, 778 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 779 .input = { { 780 .type = EM28XX_VMUX_TELEVISION, 781 .vmux = SAA7115_COMPOSITE2, 782 .amux = EM28XX_AMUX_VIDEO, 783 }, { 784 .type = EM28XX_VMUX_COMPOSITE1, 785 .vmux = SAA7115_COMPOSITE0, 786 .amux = EM28XX_AMUX_LINE_IN, 787 }, { 788 .type = EM28XX_VMUX_SVIDEO, 789 .vmux = SAA7115_SVIDEO3, 790 .amux = EM28XX_AMUX_LINE_IN, 791 } }, 792 }, 793 [EM2860_BOARD_TERRATEC_HYBRID_XS] = { 794 .name = "Terratec Cinergy A Hybrid XS", 795 .valid = EM28XX_BOARD_NOT_VALIDATED, 796 .tuner_type = TUNER_XC2028, 797 .tuner_gpio = default_tuner_gpio, 798 .decoder = EM28XX_TVP5150, 799 800 .input = { { 801 .type = EM28XX_VMUX_TELEVISION, 802 .vmux = TVP5150_COMPOSITE0, 803 .amux = EM28XX_AMUX_VIDEO, 804 .gpio = hauppauge_wintv_hvr_900_analog, 805 }, { 806 .type = EM28XX_VMUX_COMPOSITE1, 807 .vmux = TVP5150_COMPOSITE1, 808 .amux = EM28XX_AMUX_LINE_IN, 809 .gpio = hauppauge_wintv_hvr_900_analog, 810 }, { 811 .type = EM28XX_VMUX_SVIDEO, 812 .vmux = TVP5150_SVIDEO, 813 .amux = EM28XX_AMUX_LINE_IN, 814 .gpio = hauppauge_wintv_hvr_900_analog, 815 } }, 816 }, 817 [EM2861_BOARD_KWORLD_PVRTV_300U] = { 818 .name = "KWorld PVRTV 300U", 819 .valid = EM28XX_BOARD_NOT_VALIDATED, 820 .tuner_type = TUNER_XC2028, 821 .tuner_gpio = default_tuner_gpio, 822 .decoder = EM28XX_TVP5150, 823 .input = { { 824 .type = EM28XX_VMUX_TELEVISION, 825 .vmux = TVP5150_COMPOSITE0, 826 .amux = EM28XX_AMUX_VIDEO, 827 }, { 828 .type = EM28XX_VMUX_COMPOSITE1, 829 .vmux = TVP5150_COMPOSITE1, 830 .amux = EM28XX_AMUX_LINE_IN, 831 }, { 832 .type = EM28XX_VMUX_SVIDEO, 833 .vmux = TVP5150_SVIDEO, 834 .amux = EM28XX_AMUX_LINE_IN, 835 } }, 836 }, 837 [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = { 838 .name = "Yakumo MovieMixer", 839 .tuner_type = TUNER_ABSENT, /* Capture only device */ 840 .decoder = EM28XX_TVP5150, 841 .input = { { 842 .type = EM28XX_VMUX_TELEVISION, 843 .vmux = TVP5150_COMPOSITE0, 844 .amux = EM28XX_AMUX_VIDEO, 845 }, { 846 .type = EM28XX_VMUX_COMPOSITE1, 847 .vmux = TVP5150_COMPOSITE1, 848 .amux = EM28XX_AMUX_LINE_IN, 849 }, { 850 .type = EM28XX_VMUX_SVIDEO, 851 .vmux = TVP5150_SVIDEO, 852 .amux = EM28XX_AMUX_LINE_IN, 853 } }, 854 }, 855 [EM2860_BOARD_TVP5150_REFERENCE_DESIGN] = { 856 .name = "EM2860/TVP5150 Reference Design", 857 .tuner_type = TUNER_ABSENT, /* Capture only device */ 858 .decoder = EM28XX_TVP5150, 859 .input = { { 860 .type = EM28XX_VMUX_COMPOSITE1, 861 .vmux = TVP5150_COMPOSITE1, 862 .amux = EM28XX_AMUX_LINE_IN, 863 }, { 864 .type = EM28XX_VMUX_SVIDEO, 865 .vmux = TVP5150_SVIDEO, 866 .amux = EM28XX_AMUX_LINE_IN, 867 } }, 868 }, 869 [EM2861_BOARD_PLEXTOR_PX_TV100U] = { 870 .name = "Plextor ConvertX PX-TV100U", 871 .tuner_type = TUNER_TNF_5335MF, 872 .xclk = EM28XX_XCLK_I2S_MSB_TIMING | 873 EM28XX_XCLK_FREQUENCY_12MHZ, 874 .tda9887_conf = TDA9887_PRESENT, 875 .decoder = EM28XX_TVP5150, 876 .has_msp34xx = 1, 877 .input = { { 878 .type = EM28XX_VMUX_TELEVISION, 879 .vmux = TVP5150_COMPOSITE0, 880 .amux = EM28XX_AMUX_LINE_IN, 881 .gpio = pinnacle_hybrid_pro_analog, 882 }, { 883 .type = EM28XX_VMUX_COMPOSITE1, 884 .vmux = TVP5150_COMPOSITE1, 885 .amux = EM28XX_AMUX_LINE_IN, 886 .gpio = pinnacle_hybrid_pro_analog, 887 }, { 888 .type = EM28XX_VMUX_SVIDEO, 889 .vmux = TVP5150_SVIDEO, 890 .amux = EM28XX_AMUX_LINE_IN, 891 .gpio = pinnacle_hybrid_pro_analog, 892 } }, 893 }, 894 895 /* Those boards with em2870 are DVB Only*/ 896 897 [EM2870_BOARD_TERRATEC_XS] = { 898 .name = "Terratec Cinergy T XS", 899 .valid = EM28XX_BOARD_NOT_VALIDATED, 900 .tuner_type = TUNER_XC2028, 901 .tuner_gpio = default_tuner_gpio, 902 }, 903 [EM2870_BOARD_TERRATEC_XS_MT2060] = { 904 .name = "Terratec Cinergy T XS (MT2060)", 905 .valid = EM28XX_BOARD_NOT_VALIDATED, 906 .tuner_type = TUNER_ABSENT, /* MT2060 */ 907 }, 908 [EM2870_BOARD_KWORLD_350U] = { 909 .name = "Kworld 350 U DVB-T", 910 .valid = EM28XX_BOARD_NOT_VALIDATED, 911 .tuner_type = TUNER_XC2028, 912 .tuner_gpio = default_tuner_gpio, 913 }, 914 [EM2870_BOARD_KWORLD_355U] = { 915 .name = "Kworld 355 U DVB-T", 916 .valid = EM28XX_BOARD_NOT_VALIDATED, 917 .tuner_type = TUNER_ABSENT, 918 .tuner_gpio = default_tuner_gpio, 919 .has_dvb = 1, 920 .dvb_gpio = default_digital, 921 }, 922 [EM2870_BOARD_PINNACLE_PCTV_DVB] = { 923 .name = "Pinnacle PCTV DVB-T", 924 .valid = EM28XX_BOARD_NOT_VALIDATED, 925 .tuner_type = TUNER_ABSENT, /* MT2060 */ 926 /* djh - I have serious doubts this is right... */ 927 .xclk = EM28XX_XCLK_IR_RC5_MODE | 928 EM28XX_XCLK_FREQUENCY_10MHZ, 929 }, 930 [EM2870_BOARD_COMPRO_VIDEOMATE] = { 931 .name = "Compro, VideoMate U3", 932 .valid = EM28XX_BOARD_NOT_VALIDATED, 933 .tuner_type = TUNER_ABSENT, /* MT2060 */ 934 }, 935 936 [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = { 937 .name = "Terratec Hybrid XS Secam", 938 .has_msp34xx = 1, 939 .tuner_type = TUNER_XC2028, 940 .tuner_gpio = default_tuner_gpio, 941 .decoder = EM28XX_TVP5150, 942 .has_dvb = 1, 943 .dvb_gpio = terratec_cinergy_USB_XS_FR_digital, 944 .input = { { 945 .type = EM28XX_VMUX_TELEVISION, 946 .vmux = TVP5150_COMPOSITE0, 947 .amux = EM28XX_AMUX_VIDEO, 948 .gpio = terratec_cinergy_USB_XS_FR_analog, 949 }, { 950 .type = EM28XX_VMUX_COMPOSITE1, 951 .vmux = TVP5150_COMPOSITE1, 952 .amux = EM28XX_AMUX_LINE_IN, 953 .gpio = terratec_cinergy_USB_XS_FR_analog, 954 }, { 955 .type = EM28XX_VMUX_SVIDEO, 956 .vmux = TVP5150_SVIDEO, 957 .amux = EM28XX_AMUX_LINE_IN, 958 .gpio = terratec_cinergy_USB_XS_FR_analog, 959 } }, 960 }, 961 [EM2884_BOARD_TERRATEC_H5] = { 962 .name = "Terratec Cinergy H5", 963 .has_dvb = 1, 964 #if 0 965 .tuner_type = TUNER_PHILIPS_TDA8290, 966 .tuner_addr = 0x41, 967 .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */ 968 .tuner_gpio = terratec_h5_gpio, 969 #else 970 .tuner_type = TUNER_ABSENT, 971 #endif 972 .def_i2c_bus = 1, 973 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 974 EM28XX_I2C_FREQ_400_KHZ, 975 }, 976 [EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = { 977 .name = "Hauppauge WinTV HVR 930C", 978 .has_dvb = 1, 979 #if 0 /* FIXME: Add analog support */ 980 .tuner_type = TUNER_XC5000, 981 .tuner_addr = 0x41, 982 .dvb_gpio = hauppauge_930c_digital, 983 .tuner_gpio = hauppauge_930c_gpio, 984 #else 985 .tuner_type = TUNER_ABSENT, 986 #endif 987 .ir_codes = RC_MAP_HAUPPAUGE, 988 .def_i2c_bus = 1, 989 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 990 EM28XX_I2C_FREQ_400_KHZ, 991 }, 992 [EM2884_BOARD_C3TECH_DIGITAL_DUO] = { 993 .name = "C3 Tech Digital Duo HDTV/SDTV USB", 994 .has_dvb = 1, 995 /* FIXME: Add analog support - need a saa7136 driver */ 996 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */ 997 .ir_codes = RC_MAP_EMPTY, 998 .def_i2c_bus = 1, 999 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 1000 .dvb_gpio = c3tech_digital_duo_digital, 1001 }, 1002 [EM2884_BOARD_CINERGY_HTC_STICK] = { 1003 .name = "Terratec Cinergy HTC Stick", 1004 .has_dvb = 1, 1005 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, 1006 .tuner_type = TUNER_ABSENT, 1007 .def_i2c_bus = 1, 1008 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1009 EM28XX_I2C_FREQ_400_KHZ, 1010 }, 1011 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = { 1012 .name = "Hauppauge WinTV HVR 900", 1013 .tda9887_conf = TDA9887_PRESENT, 1014 .tuner_type = TUNER_XC2028, 1015 .tuner_gpio = default_tuner_gpio, 1016 .mts_firmware = 1, 1017 .has_dvb = 1, 1018 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1019 .ir_codes = RC_MAP_HAUPPAUGE, 1020 .decoder = EM28XX_TVP5150, 1021 .input = { { 1022 .type = EM28XX_VMUX_TELEVISION, 1023 .vmux = TVP5150_COMPOSITE0, 1024 .amux = EM28XX_AMUX_VIDEO, 1025 .gpio = hauppauge_wintv_hvr_900_analog, 1026 }, { 1027 .type = EM28XX_VMUX_COMPOSITE1, 1028 .vmux = TVP5150_COMPOSITE1, 1029 .amux = EM28XX_AMUX_LINE_IN, 1030 .gpio = hauppauge_wintv_hvr_900_analog, 1031 }, { 1032 .type = EM28XX_VMUX_SVIDEO, 1033 .vmux = TVP5150_SVIDEO, 1034 .amux = EM28XX_AMUX_LINE_IN, 1035 .gpio = hauppauge_wintv_hvr_900_analog, 1036 } }, 1037 }, 1038 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = { 1039 .name = "Hauppauge WinTV HVR 900 (R2)", 1040 .tda9887_conf = TDA9887_PRESENT, 1041 .tuner_type = TUNER_XC2028, 1042 .tuner_gpio = default_tuner_gpio, 1043 .mts_firmware = 1, 1044 .has_dvb = 1, 1045 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, 1046 .ir_codes = RC_MAP_HAUPPAUGE, 1047 .decoder = EM28XX_TVP5150, 1048 .input = { { 1049 .type = EM28XX_VMUX_TELEVISION, 1050 .vmux = TVP5150_COMPOSITE0, 1051 .amux = EM28XX_AMUX_VIDEO, 1052 .gpio = hauppauge_wintv_hvr_900_analog, 1053 }, { 1054 .type = EM28XX_VMUX_COMPOSITE1, 1055 .vmux = TVP5150_COMPOSITE1, 1056 .amux = EM28XX_AMUX_LINE_IN, 1057 .gpio = hauppauge_wintv_hvr_900_analog, 1058 }, { 1059 .type = EM28XX_VMUX_SVIDEO, 1060 .vmux = TVP5150_SVIDEO, 1061 .amux = EM28XX_AMUX_LINE_IN, 1062 .gpio = hauppauge_wintv_hvr_900_analog, 1063 } }, 1064 }, 1065 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = { 1066 .name = "Hauppauge WinTV HVR 850", 1067 .tuner_type = TUNER_XC2028, 1068 .tuner_gpio = default_tuner_gpio, 1069 .mts_firmware = 1, 1070 .has_dvb = 1, 1071 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1072 .ir_codes = RC_MAP_HAUPPAUGE, 1073 .decoder = EM28XX_TVP5150, 1074 .input = { { 1075 .type = EM28XX_VMUX_TELEVISION, 1076 .vmux = TVP5150_COMPOSITE0, 1077 .amux = EM28XX_AMUX_VIDEO, 1078 .gpio = hauppauge_wintv_hvr_900_analog, 1079 }, { 1080 .type = EM28XX_VMUX_COMPOSITE1, 1081 .vmux = TVP5150_COMPOSITE1, 1082 .amux = EM28XX_AMUX_LINE_IN, 1083 .gpio = hauppauge_wintv_hvr_900_analog, 1084 }, { 1085 .type = EM28XX_VMUX_SVIDEO, 1086 .vmux = TVP5150_SVIDEO, 1087 .amux = EM28XX_AMUX_LINE_IN, 1088 .gpio = hauppauge_wintv_hvr_900_analog, 1089 } }, 1090 }, 1091 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = { 1092 .name = "Hauppauge WinTV HVR 950", 1093 .tuner_type = TUNER_XC2028, 1094 .tuner_gpio = default_tuner_gpio, 1095 .mts_firmware = 1, 1096 .has_dvb = 1, 1097 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1098 .ir_codes = RC_MAP_HAUPPAUGE, 1099 .decoder = EM28XX_TVP5150, 1100 .input = { { 1101 .type = EM28XX_VMUX_TELEVISION, 1102 .vmux = TVP5150_COMPOSITE0, 1103 .amux = EM28XX_AMUX_VIDEO, 1104 .gpio = hauppauge_wintv_hvr_900_analog, 1105 }, { 1106 .type = EM28XX_VMUX_COMPOSITE1, 1107 .vmux = TVP5150_COMPOSITE1, 1108 .amux = EM28XX_AMUX_LINE_IN, 1109 .gpio = hauppauge_wintv_hvr_900_analog, 1110 }, { 1111 .type = EM28XX_VMUX_SVIDEO, 1112 .vmux = TVP5150_SVIDEO, 1113 .amux = EM28XX_AMUX_LINE_IN, 1114 .gpio = hauppauge_wintv_hvr_900_analog, 1115 } }, 1116 }, 1117 [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = { 1118 .name = "Pinnacle PCTV HD Pro Stick", 1119 .tuner_type = TUNER_XC2028, 1120 .tuner_gpio = default_tuner_gpio, 1121 .mts_firmware = 1, 1122 .has_dvb = 1, 1123 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1124 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 1125 .decoder = EM28XX_TVP5150, 1126 .input = { { 1127 .type = EM28XX_VMUX_TELEVISION, 1128 .vmux = TVP5150_COMPOSITE0, 1129 .amux = EM28XX_AMUX_VIDEO, 1130 .gpio = hauppauge_wintv_hvr_900_analog, 1131 }, { 1132 .type = EM28XX_VMUX_COMPOSITE1, 1133 .vmux = TVP5150_COMPOSITE1, 1134 .amux = EM28XX_AMUX_LINE_IN, 1135 .gpio = hauppauge_wintv_hvr_900_analog, 1136 }, { 1137 .type = EM28XX_VMUX_SVIDEO, 1138 .vmux = TVP5150_SVIDEO, 1139 .amux = EM28XX_AMUX_LINE_IN, 1140 .gpio = hauppauge_wintv_hvr_900_analog, 1141 } }, 1142 }, 1143 [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = { 1144 .name = "AMD ATI TV Wonder HD 600", 1145 .tuner_type = TUNER_XC2028, 1146 .tuner_gpio = default_tuner_gpio, 1147 .mts_firmware = 1, 1148 .has_dvb = 1, 1149 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1150 .ir_codes = RC_MAP_ATI_TV_WONDER_HD_600, 1151 .decoder = EM28XX_TVP5150, 1152 .input = { { 1153 .type = EM28XX_VMUX_TELEVISION, 1154 .vmux = TVP5150_COMPOSITE0, 1155 .amux = EM28XX_AMUX_VIDEO, 1156 .gpio = hauppauge_wintv_hvr_900_analog, 1157 }, { 1158 .type = EM28XX_VMUX_COMPOSITE1, 1159 .vmux = TVP5150_COMPOSITE1, 1160 .amux = EM28XX_AMUX_LINE_IN, 1161 .gpio = hauppauge_wintv_hvr_900_analog, 1162 }, { 1163 .type = EM28XX_VMUX_SVIDEO, 1164 .vmux = TVP5150_SVIDEO, 1165 .amux = EM28XX_AMUX_LINE_IN, 1166 .gpio = hauppauge_wintv_hvr_900_analog, 1167 } }, 1168 }, 1169 [EM2880_BOARD_TERRATEC_HYBRID_XS] = { 1170 .name = "Terratec Hybrid XS", 1171 .tuner_type = TUNER_XC2028, 1172 .tuner_gpio = default_tuner_gpio, 1173 .decoder = EM28XX_TVP5150, 1174 .has_dvb = 1, 1175 .dvb_gpio = default_digital, 1176 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS, 1177 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 1178 .input = { { 1179 .type = EM28XX_VMUX_TELEVISION, 1180 .vmux = TVP5150_COMPOSITE0, 1181 .amux = EM28XX_AMUX_VIDEO, 1182 .gpio = default_analog, 1183 }, { 1184 .type = EM28XX_VMUX_COMPOSITE1, 1185 .vmux = TVP5150_COMPOSITE1, 1186 .amux = EM28XX_AMUX_LINE_IN, 1187 .gpio = default_analog, 1188 }, { 1189 .type = EM28XX_VMUX_SVIDEO, 1190 .vmux = TVP5150_SVIDEO, 1191 .amux = EM28XX_AMUX_LINE_IN, 1192 .gpio = default_analog, 1193 } }, 1194 }, 1195 /* maybe there's a reason behind it why Terratec sells the Hybrid XS 1196 as Prodigy XS with a different PID, let's keep it separated for now 1197 maybe we'll need it lateron */ 1198 [EM2880_BOARD_TERRATEC_PRODIGY_XS] = { 1199 .name = "Terratec Prodigy XS", 1200 .tuner_type = TUNER_XC2028, 1201 .tuner_gpio = default_tuner_gpio, 1202 .decoder = EM28XX_TVP5150, 1203 .input = { { 1204 .type = EM28XX_VMUX_TELEVISION, 1205 .vmux = TVP5150_COMPOSITE0, 1206 .amux = EM28XX_AMUX_VIDEO, 1207 .gpio = hauppauge_wintv_hvr_900_analog, 1208 }, { 1209 .type = EM28XX_VMUX_COMPOSITE1, 1210 .vmux = TVP5150_COMPOSITE1, 1211 .amux = EM28XX_AMUX_LINE_IN, 1212 .gpio = hauppauge_wintv_hvr_900_analog, 1213 }, { 1214 .type = EM28XX_VMUX_SVIDEO, 1215 .vmux = TVP5150_SVIDEO, 1216 .amux = EM28XX_AMUX_LINE_IN, 1217 .gpio = hauppauge_wintv_hvr_900_analog, 1218 } }, 1219 }, 1220 [EM2820_BOARD_MSI_VOX_USB_2] = { 1221 .name = "MSI VOX USB 2.0", 1222 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1223 .tda9887_conf = TDA9887_PRESENT | 1224 TDA9887_PORT1_ACTIVE | 1225 TDA9887_PORT2_ACTIVE, 1226 .max_range_640_480 = 1, 1227 .decoder = EM28XX_SAA711X, 1228 .input = { { 1229 .type = EM28XX_VMUX_TELEVISION, 1230 .vmux = SAA7115_COMPOSITE4, 1231 .amux = EM28XX_AMUX_VIDEO, 1232 }, { 1233 .type = EM28XX_VMUX_COMPOSITE1, 1234 .vmux = SAA7115_COMPOSITE0, 1235 .amux = EM28XX_AMUX_LINE_IN, 1236 }, { 1237 .type = EM28XX_VMUX_SVIDEO, 1238 .vmux = SAA7115_SVIDEO3, 1239 .amux = EM28XX_AMUX_LINE_IN, 1240 } }, 1241 }, 1242 [EM2800_BOARD_TERRATEC_CINERGY_200] = { 1243 .name = "Terratec Cinergy 200 USB", 1244 .is_em2800 = 1, 1245 .has_ir_i2c = 1, 1246 .tuner_type = TUNER_LG_TALN, 1247 .tda9887_conf = TDA9887_PRESENT, 1248 .decoder = EM28XX_SAA711X, 1249 .input = { { 1250 .type = EM28XX_VMUX_TELEVISION, 1251 .vmux = SAA7115_COMPOSITE2, 1252 .amux = EM28XX_AMUX_VIDEO, 1253 }, { 1254 .type = EM28XX_VMUX_COMPOSITE1, 1255 .vmux = SAA7115_COMPOSITE0, 1256 .amux = EM28XX_AMUX_LINE_IN, 1257 }, { 1258 .type = EM28XX_VMUX_SVIDEO, 1259 .vmux = SAA7115_SVIDEO3, 1260 .amux = EM28XX_AMUX_LINE_IN, 1261 } }, 1262 }, 1263 [EM2800_BOARD_GRABBEEX_USB2800] = { 1264 .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder", 1265 .is_em2800 = 1, 1266 .decoder = EM28XX_SAA711X, 1267 .tuner_type = TUNER_ABSENT, /* capture only board */ 1268 .input = { { 1269 .type = EM28XX_VMUX_COMPOSITE1, 1270 .vmux = SAA7115_COMPOSITE0, 1271 .amux = EM28XX_AMUX_LINE_IN, 1272 }, { 1273 .type = EM28XX_VMUX_SVIDEO, 1274 .vmux = SAA7115_SVIDEO3, 1275 .amux = EM28XX_AMUX_LINE_IN, 1276 } }, 1277 }, 1278 [EM2800_BOARD_VC211A] = { 1279 .name = "Actionmaster/LinXcel/Digitus VC211A", 1280 .is_em2800 = 1, 1281 .tuner_type = TUNER_ABSENT, /* Capture-only board */ 1282 .decoder = EM28XX_SAA711X, 1283 .input = { { 1284 .type = EM28XX_VMUX_COMPOSITE1, 1285 .vmux = SAA7115_COMPOSITE0, 1286 .amux = EM28XX_AMUX_LINE_IN, 1287 .gpio = vc211a_enable, 1288 }, { 1289 .type = EM28XX_VMUX_SVIDEO, 1290 .vmux = SAA7115_SVIDEO3, 1291 .amux = EM28XX_AMUX_LINE_IN, 1292 .gpio = vc211a_enable, 1293 } }, 1294 }, 1295 [EM2800_BOARD_LEADTEK_WINFAST_USBII] = { 1296 .name = "Leadtek Winfast USB II", 1297 .is_em2800 = 1, 1298 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1299 .tda9887_conf = TDA9887_PRESENT, 1300 .decoder = EM28XX_SAA711X, 1301 .input = { { 1302 .type = EM28XX_VMUX_TELEVISION, 1303 .vmux = SAA7115_COMPOSITE2, 1304 .amux = EM28XX_AMUX_VIDEO, 1305 }, { 1306 .type = EM28XX_VMUX_COMPOSITE1, 1307 .vmux = SAA7115_COMPOSITE0, 1308 .amux = EM28XX_AMUX_LINE_IN, 1309 }, { 1310 .type = EM28XX_VMUX_SVIDEO, 1311 .vmux = SAA7115_SVIDEO3, 1312 .amux = EM28XX_AMUX_LINE_IN, 1313 } }, 1314 }, 1315 [EM2800_BOARD_KWORLD_USB2800] = { 1316 .name = "Kworld USB2800", 1317 .is_em2800 = 1, 1318 .tuner_type = TUNER_PHILIPS_FCV1236D, 1319 .tda9887_conf = TDA9887_PRESENT, 1320 .decoder = EM28XX_SAA711X, 1321 .input = { { 1322 .type = EM28XX_VMUX_TELEVISION, 1323 .vmux = SAA7115_COMPOSITE2, 1324 .amux = EM28XX_AMUX_VIDEO, 1325 }, { 1326 .type = EM28XX_VMUX_COMPOSITE1, 1327 .vmux = SAA7115_COMPOSITE0, 1328 .amux = EM28XX_AMUX_LINE_IN, 1329 }, { 1330 .type = EM28XX_VMUX_SVIDEO, 1331 .vmux = SAA7115_SVIDEO3, 1332 .amux = EM28XX_AMUX_LINE_IN, 1333 } }, 1334 }, 1335 [EM2820_BOARD_PINNACLE_DVC_90] = { 1336 .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker " 1337 "/ Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U", 1338 .tuner_type = TUNER_ABSENT, /* capture only board */ 1339 .decoder = EM28XX_SAA711X, 1340 .input = { { 1341 .type = EM28XX_VMUX_COMPOSITE1, 1342 .vmux = SAA7115_COMPOSITE0, 1343 .amux = EM28XX_AMUX_LINE_IN, 1344 }, { 1345 .type = EM28XX_VMUX_SVIDEO, 1346 .vmux = SAA7115_SVIDEO3, 1347 .amux = EM28XX_AMUX_LINE_IN, 1348 } }, 1349 }, 1350 [EM2800_BOARD_VGEAR_POCKETTV] = { 1351 .name = "V-Gear PocketTV", 1352 .is_em2800 = 1, 1353 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1354 .tda9887_conf = TDA9887_PRESENT, 1355 .decoder = EM28XX_SAA711X, 1356 .input = { { 1357 .type = EM28XX_VMUX_TELEVISION, 1358 .vmux = SAA7115_COMPOSITE2, 1359 .amux = EM28XX_AMUX_VIDEO, 1360 }, { 1361 .type = EM28XX_VMUX_COMPOSITE1, 1362 .vmux = SAA7115_COMPOSITE0, 1363 .amux = EM28XX_AMUX_LINE_IN, 1364 }, { 1365 .type = EM28XX_VMUX_SVIDEO, 1366 .vmux = SAA7115_SVIDEO3, 1367 .amux = EM28XX_AMUX_LINE_IN, 1368 } }, 1369 }, 1370 [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = { 1371 .name = "Pixelview PlayTV Box 4 USB 2.0", 1372 .tda9887_conf = TDA9887_PRESENT, 1373 .tuner_type = TUNER_YMEC_TVF_5533MF, 1374 .decoder = EM28XX_SAA711X, 1375 .input = { { 1376 .type = EM28XX_VMUX_TELEVISION, 1377 .vmux = SAA7115_COMPOSITE2, 1378 .amux = EM28XX_AMUX_VIDEO, 1379 .aout = EM28XX_AOUT_MONO | /* I2S */ 1380 EM28XX_AOUT_MASTER, /* Line out pin */ 1381 }, { 1382 .type = EM28XX_VMUX_COMPOSITE1, 1383 .vmux = SAA7115_COMPOSITE0, 1384 .amux = EM28XX_AMUX_LINE_IN, 1385 }, { 1386 .type = EM28XX_VMUX_SVIDEO, 1387 .vmux = SAA7115_SVIDEO3, 1388 .amux = EM28XX_AMUX_LINE_IN, 1389 } }, 1390 }, 1391 [EM2820_BOARD_PROLINK_PLAYTV_USB2] = { 1392 .name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0", 1393 .has_snapshot_button = 1, 1394 .tda9887_conf = TDA9887_PRESENT, 1395 .tuner_type = TUNER_YMEC_TVF_5533MF, 1396 .decoder = EM28XX_SAA711X, 1397 .input = { { 1398 .type = EM28XX_VMUX_TELEVISION, 1399 .vmux = SAA7115_COMPOSITE2, 1400 .amux = EM28XX_AMUX_VIDEO, 1401 .aout = EM28XX_AOUT_MONO | /* I2S */ 1402 EM28XX_AOUT_MASTER, /* Line out pin */ 1403 }, { 1404 .type = EM28XX_VMUX_COMPOSITE1, 1405 .vmux = SAA7115_COMPOSITE0, 1406 .amux = EM28XX_AMUX_LINE_IN, 1407 }, { 1408 .type = EM28XX_VMUX_SVIDEO, 1409 .vmux = SAA7115_SVIDEO3, 1410 .amux = EM28XX_AMUX_LINE_IN, 1411 } }, 1412 }, 1413 [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = { 1414 .name = "EM2860/SAA711X Reference Design", 1415 .has_snapshot_button = 1, 1416 .tuner_type = TUNER_ABSENT, 1417 .decoder = EM28XX_SAA711X, 1418 .input = { { 1419 .type = EM28XX_VMUX_SVIDEO, 1420 .vmux = SAA7115_SVIDEO3, 1421 }, { 1422 .type = EM28XX_VMUX_COMPOSITE1, 1423 .vmux = SAA7115_COMPOSITE0, 1424 } }, 1425 }, 1426 1427 [EM2874_BOARD_LEADERSHIP_ISDBT] = { 1428 .def_i2c_bus = 1, 1429 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1430 EM28XX_I2C_FREQ_100_KHZ, 1431 .xclk = EM28XX_XCLK_FREQUENCY_10MHZ, 1432 .name = "EM2874 Leadership ISDBT", 1433 .tuner_type = TUNER_ABSENT, 1434 .tuner_gpio = leadership_reset, 1435 .dvb_gpio = leadership_digital, 1436 .has_dvb = 1, 1437 }, 1438 1439 [EM2880_BOARD_MSI_DIGIVOX_AD] = { 1440 .name = "MSI DigiVox A/D", 1441 .valid = EM28XX_BOARD_NOT_VALIDATED, 1442 .tuner_type = TUNER_XC2028, 1443 .tuner_gpio = default_tuner_gpio, 1444 .decoder = EM28XX_TVP5150, 1445 .input = { { 1446 .type = EM28XX_VMUX_TELEVISION, 1447 .vmux = TVP5150_COMPOSITE0, 1448 .amux = EM28XX_AMUX_VIDEO, 1449 .gpio = em2880_msi_digivox_ad_analog, 1450 }, { 1451 .type = EM28XX_VMUX_COMPOSITE1, 1452 .vmux = TVP5150_COMPOSITE1, 1453 .amux = EM28XX_AMUX_LINE_IN, 1454 .gpio = em2880_msi_digivox_ad_analog, 1455 }, { 1456 .type = EM28XX_VMUX_SVIDEO, 1457 .vmux = TVP5150_SVIDEO, 1458 .amux = EM28XX_AMUX_LINE_IN, 1459 .gpio = em2880_msi_digivox_ad_analog, 1460 } }, 1461 }, 1462 [EM2880_BOARD_MSI_DIGIVOX_AD_II] = { 1463 .name = "MSI DigiVox A/D II", 1464 .valid = EM28XX_BOARD_NOT_VALIDATED, 1465 .tuner_type = TUNER_XC2028, 1466 .tuner_gpio = default_tuner_gpio, 1467 .decoder = EM28XX_TVP5150, 1468 .input = { { 1469 .type = EM28XX_VMUX_TELEVISION, 1470 .vmux = TVP5150_COMPOSITE0, 1471 .amux = EM28XX_AMUX_VIDEO, 1472 .gpio = em2880_msi_digivox_ad_analog, 1473 }, { 1474 .type = EM28XX_VMUX_COMPOSITE1, 1475 .vmux = TVP5150_COMPOSITE1, 1476 .amux = EM28XX_AMUX_LINE_IN, 1477 .gpio = em2880_msi_digivox_ad_analog, 1478 }, { 1479 .type = EM28XX_VMUX_SVIDEO, 1480 .vmux = TVP5150_SVIDEO, 1481 .amux = EM28XX_AMUX_LINE_IN, 1482 .gpio = em2880_msi_digivox_ad_analog, 1483 } }, 1484 }, 1485 [EM2880_BOARD_KWORLD_DVB_305U] = { 1486 .name = "KWorld DVB-T 305U", 1487 .tuner_type = TUNER_XC2028, 1488 .tuner_gpio = default_tuner_gpio, 1489 .decoder = EM28XX_TVP5150, 1490 .input = { { 1491 .type = EM28XX_VMUX_TELEVISION, 1492 .vmux = TVP5150_COMPOSITE0, 1493 .amux = EM28XX_AMUX_VIDEO, 1494 }, { 1495 .type = EM28XX_VMUX_COMPOSITE1, 1496 .vmux = TVP5150_COMPOSITE1, 1497 .amux = EM28XX_AMUX_LINE_IN, 1498 }, { 1499 .type = EM28XX_VMUX_SVIDEO, 1500 .vmux = TVP5150_SVIDEO, 1501 .amux = EM28XX_AMUX_LINE_IN, 1502 } }, 1503 }, 1504 [EM2880_BOARD_KWORLD_DVB_310U] = { 1505 .name = "KWorld DVB-T 310U", 1506 .tuner_type = TUNER_XC2028, 1507 .tuner_gpio = default_tuner_gpio, 1508 .has_dvb = 1, 1509 .dvb_gpio = default_digital, 1510 .mts_firmware = 1, 1511 .decoder = EM28XX_TVP5150, 1512 .input = { { 1513 .type = EM28XX_VMUX_TELEVISION, 1514 .vmux = TVP5150_COMPOSITE0, 1515 .amux = EM28XX_AMUX_VIDEO, 1516 .gpio = default_analog, 1517 }, { 1518 .type = EM28XX_VMUX_COMPOSITE1, 1519 .vmux = TVP5150_COMPOSITE1, 1520 .amux = EM28XX_AMUX_LINE_IN, 1521 .gpio = default_analog, 1522 }, { /* S-video has not been tested yet */ 1523 .type = EM28XX_VMUX_SVIDEO, 1524 .vmux = TVP5150_SVIDEO, 1525 .amux = EM28XX_AMUX_LINE_IN, 1526 .gpio = default_analog, 1527 } }, 1528 }, 1529 [EM2882_BOARD_KWORLD_ATSC_315U] = { 1530 .name = "KWorld ATSC 315U HDTV TV Box", 1531 .valid = EM28XX_BOARD_NOT_VALIDATED, 1532 .tuner_type = TUNER_THOMSON_DTT761X, 1533 .tuner_gpio = em2882_kworld_315u_tuner_gpio, 1534 .tda9887_conf = TDA9887_PRESENT, 1535 .decoder = EM28XX_SAA711X, 1536 .has_dvb = 1, 1537 .dvb_gpio = em2882_kworld_315u_digital, 1538 .ir_codes = RC_MAP_KWORLD_315U, 1539 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1540 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 1541 /* Analog mode - still not ready */ 1542 /*.input = { { 1543 .type = EM28XX_VMUX_TELEVISION, 1544 .vmux = SAA7115_COMPOSITE2, 1545 .amux = EM28XX_AMUX_VIDEO, 1546 .gpio = em2882_kworld_315u_analog, 1547 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1548 }, { 1549 .type = EM28XX_VMUX_COMPOSITE1, 1550 .vmux = SAA7115_COMPOSITE0, 1551 .amux = EM28XX_AMUX_LINE_IN, 1552 .gpio = em2882_kworld_315u_analog1, 1553 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1554 }, { 1555 .type = EM28XX_VMUX_SVIDEO, 1556 .vmux = SAA7115_SVIDEO3, 1557 .amux = EM28XX_AMUX_LINE_IN, 1558 .gpio = em2882_kworld_315u_analog1, 1559 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1560 } }, */ 1561 }, 1562 [EM2880_BOARD_EMPIRE_DUAL_TV] = { 1563 .name = "Empire dual TV", 1564 .tuner_type = TUNER_XC2028, 1565 .tuner_gpio = default_tuner_gpio, 1566 .has_dvb = 1, 1567 .dvb_gpio = default_digital, 1568 .mts_firmware = 1, 1569 .decoder = EM28XX_TVP5150, 1570 .input = { { 1571 .type = EM28XX_VMUX_TELEVISION, 1572 .vmux = TVP5150_COMPOSITE0, 1573 .amux = EM28XX_AMUX_VIDEO, 1574 .gpio = default_analog, 1575 }, { 1576 .type = EM28XX_VMUX_COMPOSITE1, 1577 .vmux = TVP5150_COMPOSITE1, 1578 .amux = EM28XX_AMUX_LINE_IN, 1579 .gpio = default_analog, 1580 }, { 1581 .type = EM28XX_VMUX_SVIDEO, 1582 .vmux = TVP5150_SVIDEO, 1583 .amux = EM28XX_AMUX_LINE_IN, 1584 .gpio = default_analog, 1585 } }, 1586 }, 1587 [EM2881_BOARD_DNT_DA2_HYBRID] = { 1588 .name = "DNT DA2 Hybrid", 1589 .valid = EM28XX_BOARD_NOT_VALIDATED, 1590 .tuner_type = TUNER_XC2028, 1591 .tuner_gpio = default_tuner_gpio, 1592 .decoder = EM28XX_TVP5150, 1593 .input = { { 1594 .type = EM28XX_VMUX_TELEVISION, 1595 .vmux = TVP5150_COMPOSITE0, 1596 .amux = EM28XX_AMUX_VIDEO, 1597 .gpio = default_analog, 1598 }, { 1599 .type = EM28XX_VMUX_COMPOSITE1, 1600 .vmux = TVP5150_COMPOSITE1, 1601 .amux = EM28XX_AMUX_LINE_IN, 1602 .gpio = default_analog, 1603 }, { 1604 .type = EM28XX_VMUX_SVIDEO, 1605 .vmux = TVP5150_SVIDEO, 1606 .amux = EM28XX_AMUX_LINE_IN, 1607 .gpio = default_analog, 1608 } }, 1609 }, 1610 [EM2881_BOARD_PINNACLE_HYBRID_PRO] = { 1611 .name = "Pinnacle Hybrid Pro", 1612 .tuner_type = TUNER_XC2028, 1613 .tuner_gpio = default_tuner_gpio, 1614 .decoder = EM28XX_TVP5150, 1615 .has_dvb = 1, 1616 .dvb_gpio = pinnacle_hybrid_pro_digital, 1617 .input = { { 1618 .type = EM28XX_VMUX_TELEVISION, 1619 .vmux = TVP5150_COMPOSITE0, 1620 .amux = EM28XX_AMUX_VIDEO, 1621 .gpio = pinnacle_hybrid_pro_analog, 1622 }, { 1623 .type = EM28XX_VMUX_COMPOSITE1, 1624 .vmux = TVP5150_COMPOSITE1, 1625 .amux = EM28XX_AMUX_LINE_IN, 1626 .gpio = pinnacle_hybrid_pro_analog, 1627 }, { 1628 .type = EM28XX_VMUX_SVIDEO, 1629 .vmux = TVP5150_SVIDEO, 1630 .amux = EM28XX_AMUX_LINE_IN, 1631 .gpio = pinnacle_hybrid_pro_analog, 1632 } }, 1633 }, 1634 [EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = { 1635 .name = "Pinnacle Hybrid Pro (330e)", 1636 .tuner_type = TUNER_XC2028, 1637 .tuner_gpio = default_tuner_gpio, 1638 .mts_firmware = 1, 1639 .has_dvb = 1, 1640 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, 1641 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 1642 .decoder = EM28XX_TVP5150, 1643 .input = { { 1644 .type = EM28XX_VMUX_TELEVISION, 1645 .vmux = TVP5150_COMPOSITE0, 1646 .amux = EM28XX_AMUX_VIDEO, 1647 .gpio = hauppauge_wintv_hvr_900_analog, 1648 }, { 1649 .type = EM28XX_VMUX_COMPOSITE1, 1650 .vmux = TVP5150_COMPOSITE1, 1651 .amux = EM28XX_AMUX_LINE_IN, 1652 .gpio = hauppauge_wintv_hvr_900_analog, 1653 }, { 1654 .type = EM28XX_VMUX_SVIDEO, 1655 .vmux = TVP5150_SVIDEO, 1656 .amux = EM28XX_AMUX_LINE_IN, 1657 .gpio = hauppauge_wintv_hvr_900_analog, 1658 } }, 1659 }, 1660 [EM2882_BOARD_KWORLD_VS_DVBT] = { 1661 .name = "Kworld VS-DVB-T 323UR", 1662 .tuner_type = TUNER_XC2028, 1663 .tuner_gpio = default_tuner_gpio, 1664 .decoder = EM28XX_TVP5150, 1665 .mts_firmware = 1, 1666 .has_dvb = 1, 1667 .dvb_gpio = kworld_330u_digital, 1668 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 1669 .ir_codes = RC_MAP_KWORLD_315U, 1670 .input = { { 1671 .type = EM28XX_VMUX_TELEVISION, 1672 .vmux = TVP5150_COMPOSITE0, 1673 .amux = EM28XX_AMUX_VIDEO, 1674 }, { 1675 .type = EM28XX_VMUX_COMPOSITE1, 1676 .vmux = TVP5150_COMPOSITE1, 1677 .amux = EM28XX_AMUX_LINE_IN, 1678 }, { 1679 .type = EM28XX_VMUX_SVIDEO, 1680 .vmux = TVP5150_SVIDEO, 1681 .amux = EM28XX_AMUX_LINE_IN, 1682 } }, 1683 }, 1684 [EM2882_BOARD_TERRATEC_HYBRID_XS] = { 1685 .name = "Terratec Cinnergy Hybrid T USB XS (em2882)", 1686 .tuner_type = TUNER_XC2028, 1687 .tuner_gpio = default_tuner_gpio, 1688 .mts_firmware = 1, 1689 .decoder = EM28XX_TVP5150, 1690 .has_dvb = 1, 1691 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1692 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS, 1693 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1694 .input = { { 1695 .type = EM28XX_VMUX_TELEVISION, 1696 .vmux = TVP5150_COMPOSITE0, 1697 .amux = EM28XX_AMUX_VIDEO, 1698 .gpio = hauppauge_wintv_hvr_900_analog, 1699 }, { 1700 .type = EM28XX_VMUX_COMPOSITE1, 1701 .vmux = TVP5150_COMPOSITE1, 1702 .amux = EM28XX_AMUX_LINE_IN, 1703 .gpio = hauppauge_wintv_hvr_900_analog, 1704 }, { 1705 .type = EM28XX_VMUX_SVIDEO, 1706 .vmux = TVP5150_SVIDEO, 1707 .amux = EM28XX_AMUX_LINE_IN, 1708 .gpio = hauppauge_wintv_hvr_900_analog, 1709 } }, 1710 }, 1711 [EM2882_BOARD_DIKOM_DK300] = { 1712 .name = "Dikom DK300", 1713 .tuner_type = TUNER_XC2028, 1714 .tuner_gpio = default_tuner_gpio, 1715 .decoder = EM28XX_TVP5150, 1716 .mts_firmware = 1, 1717 .has_dvb = 1, 1718 .dvb_gpio = dikom_dk300_digital, 1719 .input = { { 1720 .type = EM28XX_VMUX_TELEVISION, 1721 .vmux = TVP5150_COMPOSITE0, 1722 .amux = EM28XX_AMUX_VIDEO, 1723 .gpio = default_analog, 1724 } }, 1725 }, 1726 [EM2883_BOARD_KWORLD_HYBRID_330U] = { 1727 .name = "Kworld PlusTV HD Hybrid 330", 1728 .tuner_type = TUNER_XC2028, 1729 .tuner_gpio = default_tuner_gpio, 1730 .decoder = EM28XX_TVP5150, 1731 .mts_firmware = 1, 1732 .has_dvb = 1, 1733 .dvb_gpio = kworld_330u_digital, 1734 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1735 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1736 EM28XX_I2C_EEPROM_ON_BOARD | 1737 EM28XX_I2C_EEPROM_KEY_VALID, 1738 .input = { { 1739 .type = EM28XX_VMUX_TELEVISION, 1740 .vmux = TVP5150_COMPOSITE0, 1741 .amux = EM28XX_AMUX_VIDEO, 1742 .gpio = kworld_330u_analog, 1743 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1744 }, { 1745 .type = EM28XX_VMUX_COMPOSITE1, 1746 .vmux = TVP5150_COMPOSITE1, 1747 .amux = EM28XX_AMUX_LINE_IN, 1748 .gpio = kworld_330u_analog, 1749 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1750 }, { 1751 .type = EM28XX_VMUX_SVIDEO, 1752 .vmux = TVP5150_SVIDEO, 1753 .amux = EM28XX_AMUX_LINE_IN, 1754 .gpio = kworld_330u_analog, 1755 } }, 1756 }, 1757 [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = { 1758 .name = "Compro VideoMate ForYou/Stereo", 1759 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1760 .tvaudio_addr = 0xb0, 1761 .tda9887_conf = TDA9887_PRESENT, 1762 .decoder = EM28XX_TVP5150, 1763 .adecoder = EM28XX_TVAUDIO, 1764 .mute_gpio = compro_mute_gpio, 1765 .input = { { 1766 .type = EM28XX_VMUX_TELEVISION, 1767 .vmux = TVP5150_COMPOSITE0, 1768 .amux = EM28XX_AMUX_VIDEO, 1769 .gpio = compro_unmute_tv_gpio, 1770 }, { 1771 .type = EM28XX_VMUX_SVIDEO, 1772 .vmux = TVP5150_SVIDEO, 1773 .amux = EM28XX_AMUX_LINE_IN, 1774 .gpio = compro_unmute_svid_gpio, 1775 } }, 1776 }, 1777 [EM2860_BOARD_KAIOMY_TVNPC_U2] = { 1778 .name = "Kaiomy TVnPC U2", 1779 .vchannels = 3, 1780 .tuner_type = TUNER_XC2028, 1781 .tuner_addr = 0x61, 1782 .mts_firmware = 1, 1783 .decoder = EM28XX_TVP5150, 1784 .tuner_gpio = default_tuner_gpio, 1785 .ir_codes = RC_MAP_KAIOMY, 1786 .input = { { 1787 .type = EM28XX_VMUX_TELEVISION, 1788 .vmux = TVP5150_COMPOSITE0, 1789 .amux = EM28XX_AMUX_VIDEO, 1790 1791 }, { 1792 .type = EM28XX_VMUX_COMPOSITE1, 1793 .vmux = TVP5150_COMPOSITE1, 1794 .amux = EM28XX_AMUX_LINE_IN, 1795 }, { 1796 .type = EM28XX_VMUX_SVIDEO, 1797 .vmux = TVP5150_SVIDEO, 1798 .amux = EM28XX_AMUX_LINE_IN, 1799 } }, 1800 .radio = { 1801 .type = EM28XX_RADIO, 1802 .amux = EM28XX_AMUX_LINE_IN, 1803 } 1804 }, 1805 [EM2860_BOARD_EASYCAP] = { 1806 .name = "Easy Cap Capture DC-60", 1807 .vchannels = 2, 1808 .tuner_type = TUNER_ABSENT, 1809 .decoder = EM28XX_SAA711X, 1810 .input = { { 1811 .type = EM28XX_VMUX_COMPOSITE1, 1812 .vmux = SAA7115_COMPOSITE0, 1813 .amux = EM28XX_AMUX_LINE_IN, 1814 }, { 1815 .type = EM28XX_VMUX_SVIDEO, 1816 .vmux = SAA7115_SVIDEO3, 1817 .amux = EM28XX_AMUX_LINE_IN, 1818 } }, 1819 }, 1820 [EM2820_BOARD_IODATA_GVMVP_SZ] = { 1821 .name = "IO-DATA GV-MVP/SZ", 1822 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 1823 .tuner_gpio = default_tuner_gpio, 1824 .tda9887_conf = TDA9887_PRESENT, 1825 .decoder = EM28XX_TVP5150, 1826 .input = { { 1827 .type = EM28XX_VMUX_TELEVISION, 1828 .vmux = TVP5150_COMPOSITE0, 1829 .amux = EM28XX_AMUX_VIDEO, 1830 }, { /* Composite has not been tested yet */ 1831 .type = EM28XX_VMUX_COMPOSITE1, 1832 .vmux = TVP5150_COMPOSITE1, 1833 .amux = EM28XX_AMUX_VIDEO, 1834 }, { /* S-video has not been tested yet */ 1835 .type = EM28XX_VMUX_SVIDEO, 1836 .vmux = TVP5150_SVIDEO, 1837 .amux = EM28XX_AMUX_VIDEO, 1838 } }, 1839 }, 1840 [EM2860_BOARD_TERRATEC_GRABBY] = { 1841 .name = "Terratec Grabby", 1842 .vchannels = 2, 1843 .tuner_type = TUNER_ABSENT, 1844 .decoder = EM28XX_SAA711X, 1845 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1846 .input = { { 1847 .type = EM28XX_VMUX_COMPOSITE1, 1848 .vmux = SAA7115_COMPOSITE0, 1849 .amux = EM28XX_AMUX_LINE_IN, 1850 }, { 1851 .type = EM28XX_VMUX_SVIDEO, 1852 .vmux = SAA7115_SVIDEO3, 1853 .amux = EM28XX_AMUX_LINE_IN, 1854 } }, 1855 }, 1856 [EM2860_BOARD_TERRATEC_AV350] = { 1857 .name = "Terratec AV350", 1858 .vchannels = 2, 1859 .tuner_type = TUNER_ABSENT, 1860 .decoder = EM28XX_TVP5150, 1861 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1862 .mute_gpio = terratec_av350_mute_gpio, 1863 .input = { { 1864 .type = EM28XX_VMUX_COMPOSITE1, 1865 .vmux = TVP5150_COMPOSITE1, 1866 .amux = EM28XX_AUDIO_SRC_LINE, 1867 .gpio = terratec_av350_unmute_gpio, 1868 1869 }, { 1870 .type = EM28XX_VMUX_SVIDEO, 1871 .vmux = TVP5150_SVIDEO, 1872 .amux = EM28XX_AUDIO_SRC_LINE, 1873 .gpio = terratec_av350_unmute_gpio, 1874 } }, 1875 }, 1876 1877 [EM2860_BOARD_ELGATO_VIDEO_CAPTURE] = { 1878 .name = "Elgato Video Capture", 1879 .decoder = EM28XX_SAA711X, 1880 .tuner_type = TUNER_ABSENT, /* Capture only device */ 1881 .input = { { 1882 .type = EM28XX_VMUX_COMPOSITE1, 1883 .vmux = SAA7115_COMPOSITE0, 1884 .amux = EM28XX_AMUX_LINE_IN, 1885 }, { 1886 .type = EM28XX_VMUX_SVIDEO, 1887 .vmux = SAA7115_SVIDEO3, 1888 .amux = EM28XX_AMUX_LINE_IN, 1889 } }, 1890 }, 1891 1892 [EM2882_BOARD_EVGA_INDTUBE] = { 1893 .name = "Evga inDtube", 1894 .tuner_type = TUNER_XC2028, 1895 .tuner_gpio = default_tuner_gpio, 1896 .decoder = EM28XX_TVP5150, 1897 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 1898 .mts_firmware = 1, 1899 .has_dvb = 1, 1900 .dvb_gpio = evga_indtube_digital, 1901 .ir_codes = RC_MAP_EVGA_INDTUBE, 1902 .input = { { 1903 .type = EM28XX_VMUX_TELEVISION, 1904 .vmux = TVP5150_COMPOSITE0, 1905 .amux = EM28XX_AMUX_VIDEO, 1906 .gpio = evga_indtube_analog, 1907 }, { 1908 .type = EM28XX_VMUX_COMPOSITE1, 1909 .vmux = TVP5150_COMPOSITE1, 1910 .amux = EM28XX_AMUX_LINE_IN, 1911 .gpio = evga_indtube_analog, 1912 }, { 1913 .type = EM28XX_VMUX_SVIDEO, 1914 .vmux = TVP5150_SVIDEO, 1915 .amux = EM28XX_AMUX_LINE_IN, 1916 .gpio = evga_indtube_analog, 1917 } }, 1918 }, 1919 /* eb1a:2868 Empia EM2870 + Philips CU1216L NIM (Philips TDA10023 + 1920 Infineon TUA6034) */ 1921 [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = { 1922 .name = "Reddo DVB-C USB TV Box", 1923 .tuner_type = TUNER_ABSENT, 1924 .tuner_gpio = reddo_dvb_c_usb_box, 1925 .has_dvb = 1, 1926 }, 1927 /* 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold 1928 * initially as the KWorld PlusTV 340U, then as the UB435-Q. 1929 * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 */ 1930 [EM2870_BOARD_KWORLD_A340] = { 1931 .name = "KWorld PlusTV 340U or UB435-Q (ATSC)", 1932 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */ 1933 .has_dvb = 1, 1934 .dvb_gpio = kworld_a340_digital, 1935 .tuner_gpio = default_tuner_gpio, 1936 }, 1937 /* 2013:024f PCTV nanoStick T2 290e. 1938 * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 */ 1939 [EM28174_BOARD_PCTV_290E] = { 1940 .name = "PCTV nanoStick T2 290e", 1941 .def_i2c_bus = 1, 1942 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ, 1943 .tuner_type = TUNER_ABSENT, 1944 .tuner_gpio = pctv_290e, 1945 .has_dvb = 1, 1946 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 1947 }, 1948 /* 2013:024f PCTV DVB-S2 Stick 460e 1949 * Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293 */ 1950 [EM28174_BOARD_PCTV_460E] = { 1951 .def_i2c_bus = 1, 1952 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, 1953 .name = "PCTV DVB-S2 Stick (460e)", 1954 .tuner_type = TUNER_ABSENT, 1955 .tuner_gpio = pctv_460e, 1956 .has_dvb = 1, 1957 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 1958 }, 1959 /* eb1a:5006 Honestech VIDBOX NW03 1960 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner */ 1961 [EM2860_BOARD_HT_VIDBOX_NW03] = { 1962 .name = "Honestech Vidbox NW03", 1963 .tuner_type = TUNER_ABSENT, 1964 .decoder = EM28XX_SAA711X, 1965 .input = { { 1966 .type = EM28XX_VMUX_COMPOSITE1, 1967 .vmux = SAA7115_COMPOSITE0, 1968 .amux = EM28XX_AMUX_LINE_IN, 1969 }, { 1970 .type = EM28XX_VMUX_SVIDEO, 1971 .vmux = SAA7115_SVIDEO3, /* S-VIDEO needs confirming */ 1972 .amux = EM28XX_AMUX_LINE_IN, 1973 } }, 1974 }, 1975 /* 1b80:e425 MaxMedia UB425-TC 1976 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 */ 1977 [EM2874_BOARD_MAXMEDIA_UB425_TC] = { 1978 .name = "MaxMedia UB425-TC", 1979 .tuner_type = TUNER_ABSENT, 1980 .tuner_gpio = maxmedia_ub425_tc, 1981 .has_dvb = 1, 1982 .ir_codes = RC_MAP_REDDO, 1983 .def_i2c_bus = 1, 1984 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1985 EM28XX_I2C_FREQ_400_KHZ, 1986 }, 1987 /* 2304:0242 PCTV QuatroStick (510e) 1988 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */ 1989 [EM2884_BOARD_PCTV_510E] = { 1990 .name = "PCTV QuatroStick (510e)", 1991 .tuner_type = TUNER_ABSENT, 1992 .tuner_gpio = pctv_510e, 1993 .has_dvb = 1, 1994 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 1995 .def_i2c_bus = 1, 1996 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1997 EM28XX_I2C_FREQ_400_KHZ, 1998 }, 1999 /* 2013:0251 PCTV QuatroStick nano (520e) 2000 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */ 2001 [EM2884_BOARD_PCTV_520E] = { 2002 .name = "PCTV QuatroStick nano (520e)", 2003 .tuner_type = TUNER_ABSENT, 2004 .tuner_gpio = pctv_520e, 2005 .has_dvb = 1, 2006 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2007 .def_i2c_bus = 1, 2008 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2009 EM28XX_I2C_FREQ_400_KHZ, 2010 }, 2011 [EM2884_BOARD_TERRATEC_HTC_USB_XS] = { 2012 .name = "Terratec Cinergy HTC USB XS", 2013 .has_dvb = 1, 2014 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, 2015 .tuner_type = TUNER_ABSENT, 2016 .def_i2c_bus = 1, 2017 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2018 EM28XX_I2C_FREQ_400_KHZ, 2019 }, 2020 }; 2021 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); 2022 2023 /* table of devices that work with this driver */ 2024 struct usb_device_id em28xx_id_table[] = { 2025 { USB_DEVICE(0xeb1a, 0x2750), 2026 .driver_info = EM2750_BOARD_UNKNOWN }, 2027 { USB_DEVICE(0xeb1a, 0x2751), 2028 .driver_info = EM2750_BOARD_UNKNOWN }, 2029 { USB_DEVICE(0xeb1a, 0x2800), 2030 .driver_info = EM2800_BOARD_UNKNOWN }, 2031 { USB_DEVICE(0xeb1a, 0x2710), 2032 .driver_info = EM2820_BOARD_UNKNOWN }, 2033 { USB_DEVICE(0xeb1a, 0x2820), 2034 .driver_info = EM2820_BOARD_UNKNOWN }, 2035 { USB_DEVICE(0xeb1a, 0x2821), 2036 .driver_info = EM2820_BOARD_UNKNOWN }, 2037 { USB_DEVICE(0xeb1a, 0x2860), 2038 .driver_info = EM2820_BOARD_UNKNOWN }, 2039 { USB_DEVICE(0xeb1a, 0x2861), 2040 .driver_info = EM2820_BOARD_UNKNOWN }, 2041 { USB_DEVICE(0xeb1a, 0x2862), 2042 .driver_info = EM2820_BOARD_UNKNOWN }, 2043 { USB_DEVICE(0xeb1a, 0x2863), 2044 .driver_info = EM2820_BOARD_UNKNOWN }, 2045 { USB_DEVICE(0xeb1a, 0x2870), 2046 .driver_info = EM2820_BOARD_UNKNOWN }, 2047 { USB_DEVICE(0xeb1a, 0x2881), 2048 .driver_info = EM2820_BOARD_UNKNOWN }, 2049 { USB_DEVICE(0xeb1a, 0x2883), 2050 .driver_info = EM2820_BOARD_UNKNOWN }, 2051 { USB_DEVICE(0xeb1a, 0x2868), 2052 .driver_info = EM2820_BOARD_UNKNOWN }, 2053 { USB_DEVICE(0xeb1a, 0x2875), 2054 .driver_info = EM2820_BOARD_UNKNOWN }, 2055 { USB_DEVICE(0xeb1a, 0xe300), 2056 .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U }, 2057 { USB_DEVICE(0xeb1a, 0xe303), 2058 .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 }, 2059 { USB_DEVICE(0xeb1a, 0xe305), 2060 .driver_info = EM2880_BOARD_KWORLD_DVB_305U }, 2061 { USB_DEVICE(0xeb1a, 0xe310), 2062 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD }, 2063 { USB_DEVICE(0xeb1a, 0xa313), 2064 .driver_info = EM2882_BOARD_KWORLD_ATSC_315U }, 2065 { USB_DEVICE(0xeb1a, 0xa316), 2066 .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U }, 2067 { USB_DEVICE(0xeb1a, 0xe320), 2068 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II }, 2069 { USB_DEVICE(0xeb1a, 0xe323), 2070 .driver_info = EM2882_BOARD_KWORLD_VS_DVBT }, 2071 { USB_DEVICE(0xeb1a, 0xe350), 2072 .driver_info = EM2870_BOARD_KWORLD_350U }, 2073 { USB_DEVICE(0xeb1a, 0xe355), 2074 .driver_info = EM2870_BOARD_KWORLD_355U }, 2075 { USB_DEVICE(0xeb1a, 0x2801), 2076 .driver_info = EM2800_BOARD_GRABBEEX_USB2800 }, 2077 { USB_DEVICE(0xeb1a, 0xe357), 2078 .driver_info = EM2870_BOARD_KWORLD_355U }, 2079 { USB_DEVICE(0xeb1a, 0xe359), 2080 .driver_info = EM2870_BOARD_KWORLD_355U }, 2081 { USB_DEVICE(0x1b80, 0xe302), 2082 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */ 2083 { USB_DEVICE(0x1b80, 0xe304), 2084 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kworld DVD Maker 2 */ 2085 { USB_DEVICE(0x0ccd, 0x0036), 2086 .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 }, 2087 { USB_DEVICE(0x0ccd, 0x004c), 2088 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR }, 2089 { USB_DEVICE(0x0ccd, 0x004f), 2090 .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS }, 2091 { USB_DEVICE(0x0ccd, 0x005e), 2092 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, 2093 { USB_DEVICE(0x0ccd, 0x0042), 2094 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, 2095 { USB_DEVICE(0x0ccd, 0x0043), 2096 .driver_info = EM2870_BOARD_TERRATEC_XS }, 2097 { USB_DEVICE(0x0ccd, 0x008e), /* Cinergy HTC USB XS Rev. 1 */ 2098 .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS }, 2099 { USB_DEVICE(0x0ccd, 0x00ac), /* Cinergy HTC USB XS Rev. 2 */ 2100 .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS }, 2101 { USB_DEVICE(0x0ccd, 0x10a2), /* H5 Rev. 1 */ 2102 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2103 { USB_DEVICE(0x0ccd, 0x10ad), /* H5 Rev. 2 */ 2104 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2105 { USB_DEVICE(0x0ccd, 0x10b6), /* H5 Rev. 3 */ 2106 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2107 { USB_DEVICE(0x0ccd, 0x0084), 2108 .driver_info = EM2860_BOARD_TERRATEC_AV350 }, 2109 { USB_DEVICE(0x0ccd, 0x0096), 2110 .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, 2111 { USB_DEVICE(0x0ccd, 0x10AF), 2112 .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, 2113 { USB_DEVICE(0x0ccd, 0x00b2), 2114 .driver_info = EM2884_BOARD_CINERGY_HTC_STICK }, 2115 { USB_DEVICE(0x0fd9, 0x0033), 2116 .driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE}, 2117 { USB_DEVICE(0x185b, 0x2870), 2118 .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE }, 2119 { USB_DEVICE(0x185b, 0x2041), 2120 .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU }, 2121 { USB_DEVICE(0x2040, 0x4200), 2122 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, 2123 { USB_DEVICE(0x2040, 0x4201), 2124 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, 2125 { USB_DEVICE(0x2040, 0x6500), 2126 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 }, 2127 { USB_DEVICE(0x2040, 0x6502), 2128 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 }, 2129 { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */ 2130 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2131 { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */ 2132 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2133 { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */ 2134 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2135 { USB_DEVICE(0x2040, 0x651f), 2136 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 }, 2137 { USB_DEVICE(0x0438, 0xb002), 2138 .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 }, 2139 { USB_DEVICE(0x2001, 0xf112), 2140 .driver_info = EM2820_BOARD_DLINK_USB_TV }, 2141 { USB_DEVICE(0x2304, 0x0207), 2142 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2143 { USB_DEVICE(0x2304, 0x0208), 2144 .driver_info = EM2820_BOARD_PINNACLE_USB_2 }, 2145 { USB_DEVICE(0x2304, 0x021a), 2146 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2147 { USB_DEVICE(0x2304, 0x0226), 2148 .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E }, 2149 { USB_DEVICE(0x2304, 0x0227), 2150 .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO }, 2151 { USB_DEVICE(0x0413, 0x6023), 2152 .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII }, 2153 { USB_DEVICE(0x093b, 0xa003), 2154 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2155 { USB_DEVICE(0x093b, 0xa005), 2156 .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U }, 2157 { USB_DEVICE(0x04bb, 0x0515), 2158 .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ }, 2159 { USB_DEVICE(0xeb1a, 0x50a6), 2160 .driver_info = EM2860_BOARD_GADMEI_UTV330 }, 2161 { USB_DEVICE(0x1b80, 0xa340), 2162 .driver_info = EM2870_BOARD_KWORLD_A340 }, 2163 { USB_DEVICE(0x2013, 0x024f), 2164 .driver_info = EM28174_BOARD_PCTV_290E }, 2165 { USB_DEVICE(0x2013, 0x024c), 2166 .driver_info = EM28174_BOARD_PCTV_460E }, 2167 { USB_DEVICE(0x2040, 0x1605), 2168 .driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C }, 2169 { USB_DEVICE(0x1b80, 0xe755), 2170 .driver_info = EM2884_BOARD_C3TECH_DIGITAL_DUO }, 2171 { USB_DEVICE(0xeb1a, 0x5006), 2172 .driver_info = EM2860_BOARD_HT_VIDBOX_NW03 }, 2173 { USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */ 2174 .driver_info = EM2860_BOARD_EASYCAP }, 2175 { USB_DEVICE(0x1b80, 0xe425), 2176 .driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC }, 2177 { USB_DEVICE(0x2304, 0x0242), 2178 .driver_info = EM2884_BOARD_PCTV_510E }, 2179 { USB_DEVICE(0x2013, 0x0251), 2180 .driver_info = EM2884_BOARD_PCTV_520E }, 2181 { }, 2182 }; 2183 MODULE_DEVICE_TABLE(usb, em28xx_id_table); 2184 2185 /* 2186 * EEPROM hash table for devices with generic USB IDs 2187 */ 2188 static struct em28xx_hash_table em28xx_eeprom_hash[] = { 2189 /* P/N: SA 60002070465 Tuner: TVF7533-MF */ 2190 {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF}, 2191 {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF}, 2192 {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028}, 2193 {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028}, 2194 {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028}, 2195 {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028}, 2196 {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT}, 2197 {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028}, 2198 }; 2199 2200 /* I2C devicelist hash table for devices with generic USB IDs */ 2201 static struct em28xx_hash_table em28xx_i2c_hash[] = { 2202 {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC}, 2203 {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC}, 2204 {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT}, 2205 {0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT}, 2206 {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC}, 2207 {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF}, 2208 {0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT}, 2209 }; 2210 /* NOTE: introduce a separate hash table for devices with 16 bit eeproms */ 2211 2212 /* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */ 2213 static unsigned short saa711x_addrs[] = { 2214 0x4a >> 1, 0x48 >> 1, /* SAA7111, SAA7111A and SAA7113 */ 2215 0x42 >> 1, 0x40 >> 1, /* SAA7114, SAA7115 and SAA7118 */ 2216 I2C_CLIENT_END }; 2217 2218 static unsigned short tvp5150_addrs[] = { 2219 0xb8 >> 1, 2220 0xba >> 1, 2221 I2C_CLIENT_END 2222 }; 2223 2224 static unsigned short msp3400_addrs[] = { 2225 0x80 >> 1, 2226 0x88 >> 1, 2227 I2C_CLIENT_END 2228 }; 2229 2230 int em28xx_tuner_callback(void *ptr, int component, int command, int arg) 2231 { 2232 struct em28xx_i2c_bus *i2c_bus = ptr; 2233 struct em28xx *dev = i2c_bus->dev; 2234 int rc = 0; 2235 2236 if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000) 2237 return 0; 2238 2239 if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET) 2240 return 0; 2241 2242 rc = em28xx_gpio_set(dev, dev->board.tuner_gpio); 2243 2244 return rc; 2245 } 2246 EXPORT_SYMBOL_GPL(em28xx_tuner_callback); 2247 2248 static inline void em28xx_set_model(struct em28xx *dev) 2249 { 2250 dev->board = em28xx_boards[dev->model]; 2251 2252 /* Those are the default values for the majority of boards 2253 Use those values if not specified otherwise at boards entry 2254 */ 2255 if (!dev->board.xclk) 2256 dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE | 2257 EM28XX_XCLK_FREQUENCY_12MHZ; 2258 2259 if (!dev->board.i2c_speed) 2260 dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2261 EM28XX_I2C_FREQ_100_KHZ; 2262 2263 /* Should be initialized early, for I2C to work */ 2264 dev->def_i2c_bus = dev->board.def_i2c_bus; 2265 } 2266 2267 /* Since em28xx_pre_card_setup() requires a proper dev->model, 2268 * this won't work for boards with generic PCI IDs 2269 */ 2270 static void em28xx_pre_card_setup(struct em28xx *dev) 2271 { 2272 /* Set the initial XCLK and I2C clock values based on the board 2273 definition */ 2274 em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f); 2275 if (!dev->board.is_em2800) 2276 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed); 2277 msleep(50); 2278 2279 /* request some modules */ 2280 switch (dev->model) { 2281 case EM2861_BOARD_PLEXTOR_PX_TV100U: 2282 /* Sets the msp34xx I2S speed */ 2283 dev->i2s_speed = 2048000; 2284 break; 2285 case EM2861_BOARD_KWORLD_PVRTV_300U: 2286 case EM2880_BOARD_KWORLD_DVB_305U: 2287 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x6d); 2288 msleep(10); 2289 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x7d); 2290 msleep(10); 2291 break; 2292 case EM2870_BOARD_COMPRO_VIDEOMATE: 2293 /* TODO: someone can do some cleanup here... 2294 not everything's needed */ 2295 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); 2296 msleep(10); 2297 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01); 2298 msleep(10); 2299 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd); 2300 mdelay(70); 2301 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc); 2302 mdelay(70); 2303 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xdc); 2304 mdelay(70); 2305 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc); 2306 mdelay(70); 2307 break; 2308 case EM2870_BOARD_TERRATEC_XS_MT2060: 2309 /* this device needs some gpio writes to get the DVB-T 2310 demod work */ 2311 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe); 2312 mdelay(70); 2313 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde); 2314 mdelay(70); 2315 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe); 2316 mdelay(70); 2317 break; 2318 case EM2870_BOARD_PINNACLE_PCTV_DVB: 2319 /* this device needs some gpio writes to get the 2320 DVB-T demod work */ 2321 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe); 2322 mdelay(70); 2323 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde); 2324 mdelay(70); 2325 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe); 2326 mdelay(70); 2327 break; 2328 case EM2820_BOARD_GADMEI_UTV310: 2329 case EM2820_BOARD_MSI_VOX_USB_2: 2330 /* enables audio for that devices */ 2331 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd); 2332 break; 2333 2334 case EM2882_BOARD_KWORLD_ATSC_315U: 2335 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff); 2336 msleep(10); 2337 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe); 2338 msleep(10); 2339 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); 2340 msleep(10); 2341 em28xx_write_reg(dev, EM2880_R04_GPO, 0x08); 2342 msleep(10); 2343 break; 2344 2345 case EM2860_BOARD_KAIOMY_TVNPC_U2: 2346 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1); 2347 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1); 2348 em28xx_write_regs(dev, 0x0d, "\x42", 1); 2349 em28xx_write_regs(dev, 0x08, "\xfd", 1); 2350 msleep(10); 2351 em28xx_write_regs(dev, 0x08, "\xff", 1); 2352 msleep(10); 2353 em28xx_write_regs(dev, 0x08, "\x7f", 1); 2354 msleep(10); 2355 em28xx_write_regs(dev, 0x08, "\x6b", 1); 2356 2357 break; 2358 case EM2860_BOARD_EASYCAP: 2359 em28xx_write_regs(dev, 0x08, "\xf8", 1); 2360 break; 2361 2362 case EM2820_BOARD_IODATA_GVMVP_SZ: 2363 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff); 2364 msleep(70); 2365 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7); 2366 msleep(10); 2367 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe); 2368 msleep(70); 2369 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd); 2370 msleep(70); 2371 break; 2372 } 2373 2374 em28xx_gpio_set(dev, dev->board.tuner_gpio); 2375 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 2376 2377 /* Unlock device */ 2378 em28xx_set_mode(dev, EM28XX_SUSPEND); 2379 } 2380 2381 static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) 2382 { 2383 memset(ctl, 0, sizeof(*ctl)); 2384 2385 ctl->fname = XC2028_DEFAULT_FIRMWARE; 2386 ctl->max_len = 64; 2387 ctl->mts = em28xx_boards[dev->model].mts_firmware; 2388 2389 switch (dev->model) { 2390 case EM2880_BOARD_EMPIRE_DUAL_TV: 2391 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: 2392 case EM2882_BOARD_TERRATEC_HYBRID_XS: 2393 ctl->demod = XC3028_FE_ZARLINK456; 2394 break; 2395 case EM2880_BOARD_TERRATEC_HYBRID_XS: 2396 case EM2880_BOARD_TERRATEC_HYBRID_XS_FR: 2397 case EM2881_BOARD_PINNACLE_HYBRID_PRO: 2398 ctl->demod = XC3028_FE_ZARLINK456; 2399 break; 2400 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: 2401 case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E: 2402 ctl->demod = XC3028_FE_DEFAULT; 2403 break; 2404 case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600: 2405 ctl->demod = XC3028_FE_DEFAULT; 2406 ctl->fname = XC3028L_DEFAULT_FIRMWARE; 2407 break; 2408 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: 2409 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: 2410 case EM2880_BOARD_PINNACLE_PCTV_HD_PRO: 2411 /* FIXME: Better to specify the needed IF */ 2412 ctl->demod = XC3028_FE_DEFAULT; 2413 break; 2414 case EM2883_BOARD_KWORLD_HYBRID_330U: 2415 case EM2882_BOARD_DIKOM_DK300: 2416 case EM2882_BOARD_KWORLD_VS_DVBT: 2417 ctl->demod = XC3028_FE_CHINA; 2418 ctl->fname = XC2028_DEFAULT_FIRMWARE; 2419 break; 2420 case EM2882_BOARD_EVGA_INDTUBE: 2421 ctl->demod = XC3028_FE_CHINA; 2422 ctl->fname = XC3028L_DEFAULT_FIRMWARE; 2423 break; 2424 default: 2425 ctl->demod = XC3028_FE_OREN538; 2426 } 2427 } 2428 2429 static void em28xx_tuner_setup(struct em28xx *dev) 2430 { 2431 struct tuner_setup tun_setup; 2432 struct v4l2_frequency f; 2433 2434 if (dev->tuner_type == TUNER_ABSENT) 2435 return; 2436 2437 memset(&tun_setup, 0, sizeof(tun_setup)); 2438 2439 tun_setup.mode_mask = T_ANALOG_TV | T_RADIO; 2440 tun_setup.tuner_callback = em28xx_tuner_callback; 2441 2442 if (dev->board.radio.type) { 2443 tun_setup.type = dev->board.radio.type; 2444 tun_setup.addr = dev->board.radio_addr; 2445 2446 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup); 2447 } 2448 2449 if ((dev->tuner_type != TUNER_ABSENT) && (dev->tuner_type)) { 2450 tun_setup.type = dev->tuner_type; 2451 tun_setup.addr = dev->tuner_addr; 2452 2453 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup); 2454 } 2455 2456 if (dev->tda9887_conf) { 2457 struct v4l2_priv_tun_config tda9887_cfg; 2458 2459 tda9887_cfg.tuner = TUNER_TDA9887; 2460 tda9887_cfg.priv = &dev->tda9887_conf; 2461 2462 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &tda9887_cfg); 2463 } 2464 2465 if (dev->tuner_type == TUNER_XC2028) { 2466 struct v4l2_priv_tun_config xc2028_cfg; 2467 struct xc2028_ctrl ctl; 2468 2469 memset(&xc2028_cfg, 0, sizeof(xc2028_cfg)); 2470 memset(&ctl, 0, sizeof(ctl)); 2471 2472 em28xx_setup_xc3028(dev, &ctl); 2473 2474 xc2028_cfg.tuner = TUNER_XC2028; 2475 xc2028_cfg.priv = &ctl; 2476 2477 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &xc2028_cfg); 2478 } 2479 2480 /* configure tuner */ 2481 f.tuner = 0; 2482 f.type = V4L2_TUNER_ANALOG_TV; 2483 f.frequency = 9076; /* just a magic number */ 2484 dev->ctl_freq = f.frequency; 2485 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f); 2486 } 2487 2488 static int em28xx_hint_board(struct em28xx *dev) 2489 { 2490 int i; 2491 2492 if (dev->board.is_webcam) { 2493 if (dev->em28xx_sensor == EM28XX_MT9V011) { 2494 dev->model = EM2820_BOARD_SILVERCREST_WEBCAM; 2495 } else if (dev->em28xx_sensor == EM28XX_MT9M001 || 2496 dev->em28xx_sensor == EM28XX_MT9M111) { 2497 dev->model = EM2750_BOARD_UNKNOWN; 2498 } 2499 /* FIXME: IMPROVE ! */ 2500 2501 return 0; 2502 } 2503 2504 /* HINT method: EEPROM 2505 * 2506 * This method works only for boards with eeprom. 2507 * Uses a hash of all eeprom bytes. The hash should be 2508 * unique for a vendor/tuner pair. 2509 * There are a high chance that tuners for different 2510 * video standards produce different hashes. 2511 */ 2512 for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) { 2513 if (dev->hash == em28xx_eeprom_hash[i].hash) { 2514 dev->model = em28xx_eeprom_hash[i].model; 2515 dev->tuner_type = em28xx_eeprom_hash[i].tuner; 2516 2517 em28xx_errdev("Your board has no unique USB ID.\n"); 2518 em28xx_errdev("A hint were successfully done, " 2519 "based on eeprom hash.\n"); 2520 em28xx_errdev("This method is not 100%% failproof.\n"); 2521 em28xx_errdev("If the board were missdetected, " 2522 "please email this log to:\n"); 2523 em28xx_errdev("\tV4L Mailing List " 2524 " <linux-media@vger.kernel.org>\n"); 2525 em28xx_errdev("Board detected as %s\n", 2526 em28xx_boards[dev->model].name); 2527 2528 return 0; 2529 } 2530 } 2531 2532 /* HINT method: I2C attached devices 2533 * 2534 * This method works for all boards. 2535 * Uses a hash of i2c scanned devices. 2536 * Devices with the same i2c attached chips will 2537 * be considered equal. 2538 * This method is less precise than the eeprom one. 2539 */ 2540 2541 /* user did not request i2c scanning => do it now */ 2542 if (!dev->i2c_hash) 2543 em28xx_do_i2c_scan(dev, dev->def_i2c_bus); 2544 2545 for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) { 2546 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) { 2547 dev->model = em28xx_i2c_hash[i].model; 2548 dev->tuner_type = em28xx_i2c_hash[i].tuner; 2549 em28xx_errdev("Your board has no unique USB ID.\n"); 2550 em28xx_errdev("A hint were successfully done, " 2551 "based on i2c devicelist hash.\n"); 2552 em28xx_errdev("This method is not 100%% failproof.\n"); 2553 em28xx_errdev("If the board were missdetected, " 2554 "please email this log to:\n"); 2555 em28xx_errdev("\tV4L Mailing List " 2556 " <linux-media@vger.kernel.org>\n"); 2557 em28xx_errdev("Board detected as %s\n", 2558 em28xx_boards[dev->model].name); 2559 2560 return 0; 2561 } 2562 } 2563 2564 em28xx_errdev("Your board has no unique USB ID and thus need a " 2565 "hint to be detected.\n"); 2566 em28xx_errdev("You may try to use card=<n> insmod option to " 2567 "workaround that.\n"); 2568 em28xx_errdev("Please send an email with this log to:\n"); 2569 em28xx_errdev("\tV4L Mailing List <linux-media@vger.kernel.org>\n"); 2570 em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash); 2571 em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash); 2572 2573 em28xx_errdev("Here is a list of valid choices for the card=<n>" 2574 " insmod option:\n"); 2575 for (i = 0; i < em28xx_bcount; i++) { 2576 em28xx_errdev(" card=%d -> %s\n", 2577 i, em28xx_boards[i].name); 2578 } 2579 return -1; 2580 } 2581 2582 static void em28xx_card_setup(struct em28xx *dev) 2583 { 2584 /* 2585 * If the device can be a webcam, seek for a sensor. 2586 * If sensor is not found, then it isn't a webcam. 2587 */ 2588 if (dev->board.is_webcam) { 2589 if (em28xx_detect_sensor(dev) < 0) 2590 dev->board.is_webcam = 0; 2591 else 2592 dev->progressive = 1; 2593 } 2594 2595 switch (dev->model) { 2596 case EM2750_BOARD_UNKNOWN: 2597 case EM2820_BOARD_UNKNOWN: 2598 case EM2800_BOARD_UNKNOWN: 2599 /* 2600 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD. 2601 * 2602 * This occurs because they share identical USB vendor and 2603 * product IDs. 2604 * 2605 * What we do here is look up the EEPROM hash of the K-WORLD 2606 * and if it is found then we decide that we do not have 2607 * a DIGIVOX and reset the device to the K-WORLD instead. 2608 * 2609 * This solution is only valid if they do not share eeprom 2610 * hash identities which has not been determined as yet. 2611 */ 2612 if (em28xx_hint_board(dev) < 0) 2613 em28xx_errdev("Board not discovered\n"); 2614 else { 2615 em28xx_set_model(dev); 2616 em28xx_pre_card_setup(dev); 2617 } 2618 break; 2619 default: 2620 em28xx_set_model(dev); 2621 } 2622 2623 em28xx_info("Identified as %s (card=%d)\n", 2624 dev->board.name, dev->model); 2625 2626 dev->tuner_type = em28xx_boards[dev->model].tuner_type; 2627 if (em28xx_boards[dev->model].tuner_addr) 2628 dev->tuner_addr = em28xx_boards[dev->model].tuner_addr; 2629 2630 if (em28xx_boards[dev->model].tda9887_conf) 2631 dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf; 2632 2633 /* request some modules */ 2634 switch (dev->model) { 2635 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2: 2636 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: 2637 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: 2638 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: 2639 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: 2640 case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C: 2641 { 2642 struct tveeprom tv; 2643 2644 if (dev->eedata == NULL) 2645 break; 2646 #if defined(CONFIG_MODULES) && defined(MODULE) 2647 request_module("tveeprom"); 2648 #endif 2649 /* Call first TVeeprom */ 2650 2651 dev->i2c_client[dev->def_i2c_bus].addr = 0xa0 >> 1; 2652 tveeprom_hauppauge_analog(&dev->i2c_client[dev->def_i2c_bus], &tv, dev->eedata); 2653 2654 dev->tuner_type = tv.tuner_type; 2655 2656 if (tv.audio_processor == V4L2_IDENT_MSPX4XX) { 2657 dev->i2s_speed = 2048000; 2658 dev->board.has_msp34xx = 1; 2659 } 2660 break; 2661 } 2662 case EM2882_BOARD_KWORLD_ATSC_315U: 2663 em28xx_write_reg(dev, 0x0d, 0x42); 2664 msleep(10); 2665 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd); 2666 msleep(10); 2667 break; 2668 case EM2820_BOARD_KWORLD_PVRTV2800RF: 2669 /* GPIO enables sound on KWORLD PVR TV 2800RF */ 2670 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9); 2671 break; 2672 case EM2820_BOARD_UNKNOWN: 2673 case EM2800_BOARD_UNKNOWN: 2674 /* 2675 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD. 2676 * 2677 * This occurs because they share identical USB vendor and 2678 * product IDs. 2679 * 2680 * What we do here is look up the EEPROM hash of the K-WORLD 2681 * and if it is found then we decide that we do not have 2682 * a DIGIVOX and reset the device to the K-WORLD instead. 2683 * 2684 * This solution is only valid if they do not share eeprom 2685 * hash identities which has not been determined as yet. 2686 */ 2687 case EM2880_BOARD_MSI_DIGIVOX_AD: 2688 if (!em28xx_hint_board(dev)) 2689 em28xx_set_model(dev); 2690 2691 /* In cases where we had to use a board hint, the call to 2692 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, 2693 so make the call now so the analog GPIOs are set properly 2694 before probing the i2c bus. */ 2695 em28xx_gpio_set(dev, dev->board.tuner_gpio); 2696 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 2697 break; 2698 2699 /* 2700 * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR. 2701 * 2702 * This occurs because they share identical USB vendor and 2703 * product IDs. 2704 * 2705 * What we do here is look up the EEPROM hash of the Dikom 2706 * and if it is found then we decide that we do not have 2707 * a Kworld and reset the device to the Dikom instead. 2708 * 2709 * This solution is only valid if they do not share eeprom 2710 * hash identities which has not been determined as yet. 2711 */ 2712 case EM2882_BOARD_KWORLD_VS_DVBT: 2713 if (!em28xx_hint_board(dev)) 2714 em28xx_set_model(dev); 2715 2716 /* In cases where we had to use a board hint, the call to 2717 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, 2718 so make the call now so the analog GPIOs are set properly 2719 before probing the i2c bus. */ 2720 em28xx_gpio_set(dev, dev->board.tuner_gpio); 2721 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 2722 break; 2723 } 2724 2725 if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) { 2726 em28xx_errdev("\n\n"); 2727 em28xx_errdev("The support for this board weren't " 2728 "valid yet.\n"); 2729 em28xx_errdev("Please send a report of having this working\n"); 2730 em28xx_errdev("not to V4L mailing list (and/or to other " 2731 "addresses)\n\n"); 2732 } 2733 2734 /* Free eeprom data memory */ 2735 kfree(dev->eedata); 2736 dev->eedata = NULL; 2737 2738 /* Allow override tuner type by a module parameter */ 2739 if (tuner >= 0) 2740 dev->tuner_type = tuner; 2741 2742 /* request some modules */ 2743 if (dev->board.has_msp34xx) 2744 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus], 2745 "msp3400", 0, msp3400_addrs); 2746 2747 if (dev->board.decoder == EM28XX_SAA711X) 2748 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus], 2749 "saa7115_auto", 0, saa711x_addrs); 2750 2751 if (dev->board.decoder == EM28XX_TVP5150) 2752 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus], 2753 "tvp5150", 0, tvp5150_addrs); 2754 2755 if (dev->board.adecoder == EM28XX_TVAUDIO) 2756 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus], 2757 "tvaudio", dev->board.tvaudio_addr, NULL); 2758 2759 if (dev->board.tuner_type != TUNER_ABSENT) { 2760 int has_demod = (dev->tda9887_conf & TDA9887_PRESENT); 2761 2762 if (dev->board.radio.type) 2763 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus], 2764 "tuner", dev->board.radio_addr, NULL); 2765 2766 if (has_demod) 2767 v4l2_i2c_new_subdev(&dev->v4l2_dev, 2768 &dev->i2c_adap[dev->def_i2c_bus], "tuner", 2769 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); 2770 if (dev->tuner_addr == 0) { 2771 enum v4l2_i2c_tuner_type type = 2772 has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV; 2773 struct v4l2_subdev *sd; 2774 2775 sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, 2776 &dev->i2c_adap[dev->def_i2c_bus], "tuner", 2777 0, v4l2_i2c_tuner_addrs(type)); 2778 2779 if (sd) 2780 dev->tuner_addr = v4l2_i2c_subdev_addr(sd); 2781 } else { 2782 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus], 2783 "tuner", dev->tuner_addr, NULL); 2784 } 2785 } 2786 2787 em28xx_tuner_setup(dev); 2788 2789 em28xx_init_camera(dev); 2790 } 2791 2792 2793 static void request_module_async(struct work_struct *work) 2794 { 2795 struct em28xx *dev = container_of(work, 2796 struct em28xx, request_module_wk); 2797 2798 /* 2799 * The em28xx extensions can be modules or builtin. If the 2800 * modules are already loaded or are built in, those extensions 2801 * can be initialised right now. Otherwise, the module init 2802 * code will do it. 2803 */ 2804 em28xx_init_extension(dev); 2805 2806 #if defined(CONFIG_MODULES) && defined(MODULE) 2807 if (dev->has_audio_class) 2808 request_module("snd-usb-audio"); 2809 else if (dev->has_alsa_audio) 2810 request_module("em28xx-alsa"); 2811 2812 if (dev->board.has_dvb) 2813 request_module("em28xx-dvb"); 2814 if (dev->board.has_snapshot_button || 2815 ((dev->board.ir_codes || dev->board.has_ir_i2c) && !disable_ir)) 2816 request_module("em28xx-rc"); 2817 #endif /* CONFIG_MODULES */ 2818 } 2819 2820 static void request_modules(struct em28xx *dev) 2821 { 2822 INIT_WORK(&dev->request_module_wk, request_module_async); 2823 schedule_work(&dev->request_module_wk); 2824 } 2825 2826 static void flush_request_modules(struct em28xx *dev) 2827 { 2828 flush_work(&dev->request_module_wk); 2829 } 2830 2831 /* 2832 * em28xx_release_resources() 2833 * unregisters the v4l2,i2c and usb devices 2834 * called when the device gets disconnected or at module unload 2835 */ 2836 void em28xx_release_resources(struct em28xx *dev) 2837 { 2838 /*FIXME: I2C IR should be disconnected */ 2839 2840 em28xx_release_analog_resources(dev); 2841 2842 if (dev->def_i2c_bus) 2843 em28xx_i2c_unregister(dev, 1); 2844 em28xx_i2c_unregister(dev, 0); 2845 2846 v4l2_ctrl_handler_free(&dev->ctrl_handler); 2847 2848 v4l2_device_unregister(&dev->v4l2_dev); 2849 2850 usb_put_dev(dev->udev); 2851 2852 /* Mark device as unused */ 2853 clear_bit(dev->devno, &em28xx_devused); 2854 }; 2855 2856 /* 2857 * em28xx_init_dev() 2858 * allocates and inits the device structs, registers i2c bus and v4l device 2859 */ 2860 static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, 2861 struct usb_interface *interface, 2862 int minor) 2863 { 2864 struct v4l2_ctrl_handler *hdl = &dev->ctrl_handler; 2865 int retval; 2866 static const char *default_chip_name = "em28xx"; 2867 const char *chip_name = default_chip_name; 2868 2869 dev->udev = udev; 2870 mutex_init(&dev->vb_queue_lock); 2871 mutex_init(&dev->vb_vbi_queue_lock); 2872 mutex_init(&dev->ctrl_urb_lock); 2873 spin_lock_init(&dev->slock); 2874 2875 dev->em28xx_write_regs = em28xx_write_regs; 2876 dev->em28xx_read_reg = em28xx_read_reg; 2877 dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len; 2878 dev->em28xx_write_regs_req = em28xx_write_regs_req; 2879 dev->em28xx_read_reg_req = em28xx_read_reg_req; 2880 dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800; 2881 2882 em28xx_set_model(dev); 2883 2884 /* Set the default GPO/GPIO for legacy devices */ 2885 dev->reg_gpo_num = EM2880_R04_GPO; 2886 dev->reg_gpio_num = EM28XX_R08_GPIO; 2887 2888 dev->wait_after_write = 5; 2889 2890 /* Based on the Chip ID, set the device configuration */ 2891 retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID); 2892 if (retval > 0) { 2893 dev->chip_id = retval; 2894 2895 switch (dev->chip_id) { 2896 case CHIP_ID_EM2800: 2897 chip_name = "em2800"; 2898 break; 2899 case CHIP_ID_EM2710: 2900 chip_name = "em2710"; 2901 break; 2902 case CHIP_ID_EM2750: 2903 chip_name = "em2750"; 2904 break; 2905 case CHIP_ID_EM2765: 2906 chip_name = "em2765"; 2907 dev->wait_after_write = 0; 2908 dev->is_em25xx = 1; 2909 dev->eeprom_addrwidth_16bit = 1; 2910 break; 2911 case CHIP_ID_EM2820: 2912 chip_name = "em2710/2820"; 2913 if (le16_to_cpu(dev->udev->descriptor.idVendor) 2914 == 0xeb1a) { 2915 __le16 idProd = dev->udev->descriptor.idProduct; 2916 if (le16_to_cpu(idProd) == 0x2710) 2917 chip_name = "em2710"; 2918 else if (le16_to_cpu(idProd) == 0x2820) 2919 chip_name = "em2820"; 2920 } 2921 /* NOTE: the em2820 is used in webcams, too ! */ 2922 break; 2923 case CHIP_ID_EM2840: 2924 chip_name = "em2840"; 2925 break; 2926 case CHIP_ID_EM2860: 2927 chip_name = "em2860"; 2928 break; 2929 case CHIP_ID_EM2870: 2930 chip_name = "em2870"; 2931 dev->wait_after_write = 0; 2932 break; 2933 case CHIP_ID_EM2874: 2934 chip_name = "em2874"; 2935 dev->reg_gpio_num = EM2874_R80_GPIO; 2936 dev->wait_after_write = 0; 2937 dev->eeprom_addrwidth_16bit = 1; 2938 break; 2939 case CHIP_ID_EM28174: 2940 chip_name = "em28174"; 2941 dev->reg_gpio_num = EM2874_R80_GPIO; 2942 dev->wait_after_write = 0; 2943 dev->eeprom_addrwidth_16bit = 1; 2944 break; 2945 case CHIP_ID_EM2883: 2946 chip_name = "em2882/3"; 2947 dev->wait_after_write = 0; 2948 break; 2949 case CHIP_ID_EM2884: 2950 chip_name = "em2884"; 2951 dev->reg_gpio_num = EM2874_R80_GPIO; 2952 dev->wait_after_write = 0; 2953 dev->eeprom_addrwidth_16bit = 1; 2954 break; 2955 default: 2956 printk(KERN_INFO DRIVER_NAME 2957 ": unknown em28xx chip ID (%d)\n", dev->chip_id); 2958 } 2959 } 2960 2961 if (chip_name != default_chip_name) 2962 printk(KERN_INFO DRIVER_NAME 2963 ": chip ID is %s\n", chip_name); 2964 2965 /* 2966 * For em2820/em2710, the name may change latter, after checking 2967 * if the device has a sensor (so, it is em2710) or not. 2968 */ 2969 snprintf(dev->name, sizeof(dev->name), "%s #%d", chip_name, dev->devno); 2970 2971 if (dev->is_audio_only) { 2972 retval = em28xx_audio_setup(dev); 2973 if (retval) 2974 return -ENODEV; 2975 em28xx_init_extension(dev); 2976 2977 return 0; 2978 } 2979 2980 /* Prepopulate cached GPO register content */ 2981 retval = em28xx_read_reg(dev, dev->reg_gpo_num); 2982 if (retval >= 0) 2983 dev->reg_gpo = retval; 2984 2985 em28xx_pre_card_setup(dev); 2986 2987 if (!dev->board.is_em2800) { 2988 /* Resets I2C speed */ 2989 retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed); 2990 if (retval < 0) { 2991 em28xx_errdev("%s: em28xx_write_reg failed!" 2992 " retval [%d]\n", 2993 __func__, retval); 2994 return retval; 2995 } 2996 } 2997 2998 retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev); 2999 if (retval < 0) { 3000 em28xx_errdev("Call to v4l2_device_register() failed!\n"); 3001 return retval; 3002 } 3003 3004 v4l2_ctrl_handler_init(hdl, 8); 3005 dev->v4l2_dev.ctrl_handler = hdl; 3006 3007 rt_mutex_init(&dev->i2c_bus_lock); 3008 3009 /* register i2c bus 0 */ 3010 if (dev->board.is_em2800) 3011 retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM2800); 3012 else 3013 retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM28XX); 3014 if (retval < 0) { 3015 em28xx_errdev("%s: em28xx_i2c_register bus 0 - error [%d]!\n", 3016 __func__, retval); 3017 goto unregister_dev; 3018 } 3019 3020 /* register i2c bus 1 */ 3021 if (dev->def_i2c_bus) { 3022 if (dev->is_em25xx) 3023 retval = em28xx_i2c_register(dev, 1, 3024 EM28XX_I2C_ALGO_EM25XX_BUS_B); 3025 else 3026 retval = em28xx_i2c_register(dev, 1, 3027 EM28XX_I2C_ALGO_EM28XX); 3028 if (retval < 0) { 3029 em28xx_errdev("%s: em28xx_i2c_register bus 1 - error [%d]!\n", 3030 __func__, retval); 3031 goto unregister_dev; 3032 } 3033 } 3034 3035 /* 3036 * Default format, used for tvp5150 or saa711x output formats 3037 */ 3038 dev->vinmode = 0x10; 3039 dev->vinctl = EM28XX_VINCTRL_INTERLACED | 3040 EM28XX_VINCTRL_CCIR656_ENABLE; 3041 3042 /* Do board specific init and eeprom reading */ 3043 em28xx_card_setup(dev); 3044 3045 /* Configure audio */ 3046 retval = em28xx_audio_setup(dev); 3047 if (retval < 0) { 3048 em28xx_errdev("%s: Error while setting audio - error [%d]!\n", 3049 __func__, retval); 3050 goto fail; 3051 } 3052 if (dev->audio_mode.ac97 != EM28XX_NO_AC97) { 3053 v4l2_ctrl_new_std(hdl, &em28xx_ctrl_ops, 3054 V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1); 3055 v4l2_ctrl_new_std(hdl, &em28xx_ctrl_ops, 3056 V4L2_CID_AUDIO_VOLUME, 0, 0x1f, 1, 0x1f); 3057 } else { 3058 /* install the em28xx notify callback */ 3059 v4l2_ctrl_notify(v4l2_ctrl_find(hdl, V4L2_CID_AUDIO_MUTE), 3060 em28xx_ctrl_notify, dev); 3061 v4l2_ctrl_notify(v4l2_ctrl_find(hdl, V4L2_CID_AUDIO_VOLUME), 3062 em28xx_ctrl_notify, dev); 3063 } 3064 3065 /* wake i2c devices */ 3066 em28xx_wake_i2c(dev); 3067 3068 /* init video dma queues */ 3069 INIT_LIST_HEAD(&dev->vidq.active); 3070 INIT_LIST_HEAD(&dev->vbiq.active); 3071 3072 if (dev->board.has_msp34xx) { 3073 /* Send a reset to other chips via gpio */ 3074 retval = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7); 3075 if (retval < 0) { 3076 em28xx_errdev("%s: em28xx_write_reg - " 3077 "msp34xx(1) failed! error [%d]\n", 3078 __func__, retval); 3079 goto fail; 3080 } 3081 msleep(3); 3082 3083 retval = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff); 3084 if (retval < 0) { 3085 em28xx_errdev("%s: em28xx_write_reg - " 3086 "msp34xx(2) failed! error [%d]\n", 3087 __func__, retval); 3088 goto fail; 3089 } 3090 msleep(3); 3091 } 3092 3093 retval = em28xx_register_analog_devices(dev); 3094 if (retval < 0) { 3095 goto fail; 3096 } 3097 3098 /* Save some power by putting tuner to sleep */ 3099 v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0); 3100 3101 return 0; 3102 3103 fail: 3104 if (dev->def_i2c_bus) 3105 em28xx_i2c_unregister(dev, 1); 3106 em28xx_i2c_unregister(dev, 0); 3107 v4l2_ctrl_handler_free(&dev->ctrl_handler); 3108 3109 unregister_dev: 3110 v4l2_device_unregister(&dev->v4l2_dev); 3111 3112 return retval; 3113 } 3114 3115 /* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */ 3116 #define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) 3117 3118 /* 3119 * em28xx_usb_probe() 3120 * checks for supported devices 3121 */ 3122 static int em28xx_usb_probe(struct usb_interface *interface, 3123 const struct usb_device_id *id) 3124 { 3125 struct usb_device *udev; 3126 struct em28xx *dev = NULL; 3127 int retval; 3128 bool has_audio = false, has_video = false, has_dvb = false; 3129 int i, nr, try_bulk; 3130 const int ifnum = interface->altsetting[0].desc.bInterfaceNumber; 3131 char *speed; 3132 3133 udev = usb_get_dev(interface_to_usbdev(interface)); 3134 3135 /* Check to see next free device and mark as used */ 3136 do { 3137 nr = find_first_zero_bit(&em28xx_devused, EM28XX_MAXBOARDS); 3138 if (nr >= EM28XX_MAXBOARDS) { 3139 /* No free device slots */ 3140 printk(DRIVER_NAME ": Supports only %i em28xx boards.\n", 3141 EM28XX_MAXBOARDS); 3142 retval = -ENOMEM; 3143 goto err_no_slot; 3144 } 3145 } while (test_and_set_bit(nr, &em28xx_devused)); 3146 3147 /* Don't register audio interfaces */ 3148 if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { 3149 em28xx_err(DRIVER_NAME " audio device (%04x:%04x): " 3150 "interface %i, class %i\n", 3151 le16_to_cpu(udev->descriptor.idVendor), 3152 le16_to_cpu(udev->descriptor.idProduct), 3153 ifnum, 3154 interface->altsetting[0].desc.bInterfaceClass); 3155 3156 retval = -ENODEV; 3157 goto err; 3158 } 3159 3160 /* allocate memory for our device state and initialize it */ 3161 dev = kzalloc(sizeof(*dev), GFP_KERNEL); 3162 if (dev == NULL) { 3163 em28xx_err(DRIVER_NAME ": out of memory!\n"); 3164 retval = -ENOMEM; 3165 goto err; 3166 } 3167 3168 /* compute alternate max packet sizes */ 3169 dev->alt_max_pkt_size_isoc = 3170 kmalloc(sizeof(dev->alt_max_pkt_size_isoc[0]) * 3171 interface->num_altsetting, GFP_KERNEL); 3172 if (dev->alt_max_pkt_size_isoc == NULL) { 3173 em28xx_errdev("out of memory!\n"); 3174 kfree(dev); 3175 retval = -ENOMEM; 3176 goto err; 3177 } 3178 3179 /* Get endpoints */ 3180 for (i = 0; i < interface->num_altsetting; i++) { 3181 int ep; 3182 3183 for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) { 3184 const struct usb_endpoint_descriptor *e; 3185 int sizedescr, size; 3186 3187 e = &interface->altsetting[i].endpoint[ep].desc; 3188 3189 sizedescr = le16_to_cpu(e->wMaxPacketSize); 3190 size = sizedescr & 0x7ff; 3191 3192 if (udev->speed == USB_SPEED_HIGH) 3193 size = size * hb_mult(sizedescr); 3194 3195 if (usb_endpoint_dir_in(e)) { 3196 switch (e->bEndpointAddress) { 3197 case 0x82: 3198 has_video = true; 3199 if (usb_endpoint_xfer_isoc(e)) { 3200 dev->analog_ep_isoc = 3201 e->bEndpointAddress; 3202 dev->alt_max_pkt_size_isoc[i] = size; 3203 } else if (usb_endpoint_xfer_bulk(e)) { 3204 dev->analog_ep_bulk = 3205 e->bEndpointAddress; 3206 } 3207 break; 3208 case 0x83: 3209 if (usb_endpoint_xfer_isoc(e)) { 3210 has_audio = true; 3211 } else { 3212 printk(KERN_INFO DRIVER_NAME 3213 ": error: skipping audio endpoint 0x83, because it uses bulk transfers !\n"); 3214 } 3215 break; 3216 case 0x84: 3217 if (has_video && 3218 (usb_endpoint_xfer_bulk(e))) { 3219 dev->analog_ep_bulk = 3220 e->bEndpointAddress; 3221 } else { 3222 if (usb_endpoint_xfer_isoc(e)) { 3223 if (size > dev->dvb_max_pkt_size_isoc) { 3224 has_dvb = true; /* see NOTE (~) */ 3225 dev->dvb_ep_isoc = e->bEndpointAddress; 3226 dev->dvb_max_pkt_size_isoc = size; 3227 dev->dvb_alt_isoc = i; 3228 } 3229 } else { 3230 has_dvb = true; 3231 dev->dvb_ep_bulk = e->bEndpointAddress; 3232 } 3233 } 3234 break; 3235 } 3236 } 3237 /* NOTE: 3238 * Old logic with support for isoc transfers only was: 3239 * 0x82 isoc => analog 3240 * 0x83 isoc => audio 3241 * 0x84 isoc => digital 3242 * 3243 * New logic with support for bulk transfers 3244 * 0x82 isoc => analog 3245 * 0x82 bulk => analog 3246 * 0x83 isoc* => audio 3247 * 0x84 isoc => digital 3248 * 0x84 bulk => analog or digital** 3249 * (*: audio should always be isoc) 3250 * (**: analog, if ep 0x82 is isoc, otherwise digital) 3251 * 3252 * The new logic preserves backwards compatibility and 3253 * reflects the endpoint configurations we have seen 3254 * so far. But there might be devices for which this 3255 * logic is not sufficient... 3256 */ 3257 /* 3258 * NOTE (~): some manufacturers (e.g. Terratec) disable 3259 * endpoints by setting wMaxPacketSize to 0 bytes for 3260 * all alt settings. So far, we've seen this for 3261 * DVB isoc endpoints only. 3262 */ 3263 } 3264 } 3265 3266 if (!(has_audio || has_video || has_dvb)) { 3267 retval = -ENODEV; 3268 goto err_free; 3269 } 3270 3271 switch (udev->speed) { 3272 case USB_SPEED_LOW: 3273 speed = "1.5"; 3274 break; 3275 case USB_SPEED_UNKNOWN: 3276 case USB_SPEED_FULL: 3277 speed = "12"; 3278 break; 3279 case USB_SPEED_HIGH: 3280 speed = "480"; 3281 break; 3282 default: 3283 speed = "unknown"; 3284 } 3285 3286 printk(KERN_INFO DRIVER_NAME 3287 ": New device %s %s @ %s Mbps " 3288 "(%04x:%04x, interface %d, class %d)\n", 3289 udev->manufacturer ? udev->manufacturer : "", 3290 udev->product ? udev->product : "", 3291 speed, 3292 le16_to_cpu(udev->descriptor.idVendor), 3293 le16_to_cpu(udev->descriptor.idProduct), 3294 ifnum, 3295 interface->altsetting->desc.bInterfaceNumber); 3296 3297 /* 3298 * Make sure we have 480 Mbps of bandwidth, otherwise things like 3299 * video stream wouldn't likely work, since 12 Mbps is generally 3300 * not enough even for most Digital TV streams. 3301 */ 3302 if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) { 3303 printk(DRIVER_NAME ": Device initialization failed.\n"); 3304 printk(DRIVER_NAME ": Device must be connected to a high-speed" 3305 " USB 2.0 port.\n"); 3306 retval = -ENODEV; 3307 goto err_free; 3308 } 3309 3310 dev->devno = nr; 3311 dev->model = id->driver_info; 3312 dev->alt = -1; 3313 dev->is_audio_only = has_audio && !(has_video || has_dvb); 3314 dev->has_alsa_audio = has_audio; 3315 dev->audio_ifnum = ifnum; 3316 3317 /* Checks if audio is provided by some interface */ 3318 for (i = 0; i < udev->config->desc.bNumInterfaces; i++) { 3319 struct usb_interface *uif = udev->config->interface[i]; 3320 if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { 3321 dev->has_audio_class = 1; 3322 break; 3323 } 3324 } 3325 3326 if (has_audio) 3327 printk(KERN_INFO DRIVER_NAME 3328 ": Audio interface %i found %s\n", 3329 ifnum, 3330 dev->has_audio_class ? "(USB Audio Class)" : "(Vendor Class)"); 3331 if (has_video) 3332 printk(KERN_INFO DRIVER_NAME 3333 ": Video interface %i found:%s%s\n", 3334 ifnum, 3335 dev->analog_ep_bulk ? " bulk" : "", 3336 dev->analog_ep_isoc ? " isoc" : ""); 3337 if (has_dvb) 3338 printk(KERN_INFO DRIVER_NAME 3339 ": DVB interface %i found:%s%s\n", 3340 ifnum, 3341 dev->dvb_ep_bulk ? " bulk" : "", 3342 dev->dvb_ep_isoc ? " isoc" : ""); 3343 3344 dev->num_alt = interface->num_altsetting; 3345 3346 if ((unsigned)card[nr] < em28xx_bcount) 3347 dev->model = card[nr]; 3348 3349 /* save our data pointer in this interface device */ 3350 usb_set_intfdata(interface, dev); 3351 3352 /* initialize videobuf2 stuff */ 3353 em28xx_vb2_setup(dev); 3354 3355 /* allocate device struct */ 3356 mutex_init(&dev->lock); 3357 mutex_lock(&dev->lock); 3358 retval = em28xx_init_dev(dev, udev, interface, nr); 3359 if (retval) { 3360 goto unlock_and_free; 3361 } 3362 3363 if (usb_xfer_mode < 0) { 3364 if (dev->board.is_webcam) 3365 try_bulk = 1; 3366 else 3367 try_bulk = 0; 3368 } else { 3369 try_bulk = usb_xfer_mode > 0; 3370 } 3371 3372 /* Select USB transfer types to use */ 3373 if (has_video) { 3374 if (!dev->analog_ep_isoc || (try_bulk && dev->analog_ep_bulk)) 3375 dev->analog_xfer_bulk = 1; 3376 em28xx_info("analog set to %s mode.\n", 3377 dev->analog_xfer_bulk ? "bulk" : "isoc"); 3378 } 3379 if (has_dvb) { 3380 if (!dev->dvb_ep_isoc || (try_bulk && dev->dvb_ep_bulk)) 3381 dev->dvb_xfer_bulk = 1; 3382 3383 em28xx_info("dvb set to %s mode.\n", 3384 dev->dvb_xfer_bulk ? "bulk" : "isoc"); 3385 3386 /* pre-allocate DVB usb transfer buffers */ 3387 if (dev->dvb_xfer_bulk) { 3388 retval = em28xx_alloc_urbs(dev, EM28XX_DIGITAL_MODE, 3389 dev->dvb_xfer_bulk, 3390 EM28XX_DVB_NUM_BUFS, 3391 512, 3392 EM28XX_DVB_BULK_PACKET_MULTIPLIER); 3393 } else { 3394 retval = em28xx_alloc_urbs(dev, EM28XX_DIGITAL_MODE, 3395 dev->dvb_xfer_bulk, 3396 EM28XX_DVB_NUM_BUFS, 3397 dev->dvb_max_pkt_size_isoc, 3398 EM28XX_DVB_NUM_ISOC_PACKETS); 3399 } 3400 if (retval) { 3401 printk(DRIVER_NAME 3402 ": Failed to pre-allocate USB transfer buffers for DVB.\n"); 3403 goto unlock_and_free; 3404 } 3405 } 3406 3407 request_modules(dev); 3408 3409 /* Should be the last thing to do, to avoid newer udev's to 3410 open the device before fully initializing it 3411 */ 3412 mutex_unlock(&dev->lock); 3413 3414 return 0; 3415 3416 unlock_and_free: 3417 mutex_unlock(&dev->lock); 3418 3419 err_free: 3420 kfree(dev->alt_max_pkt_size_isoc); 3421 kfree(dev); 3422 3423 err: 3424 clear_bit(nr, &em28xx_devused); 3425 3426 err_no_slot: 3427 usb_put_dev(udev); 3428 return retval; 3429 } 3430 3431 /* 3432 * em28xx_usb_disconnect() 3433 * called when the device gets disconnected 3434 * video device will be unregistered on v4l2_close in case it is still open 3435 */ 3436 static void em28xx_usb_disconnect(struct usb_interface *interface) 3437 { 3438 struct em28xx *dev; 3439 3440 dev = usb_get_intfdata(interface); 3441 usb_set_intfdata(interface, NULL); 3442 3443 if (!dev) 3444 return; 3445 3446 dev->disconnected = 1; 3447 3448 if (dev->is_audio_only) { 3449 mutex_lock(&dev->lock); 3450 em28xx_close_extension(dev); 3451 mutex_unlock(&dev->lock); 3452 return; 3453 } 3454 3455 em28xx_info("disconnecting %s\n", dev->vdev->name); 3456 3457 flush_request_modules(dev); 3458 3459 mutex_lock(&dev->lock); 3460 3461 v4l2_device_disconnect(&dev->v4l2_dev); 3462 3463 if (dev->users) { 3464 em28xx_warn("device %s is open! Deregistration and memory deallocation are deferred on close.\n", 3465 video_device_node_name(dev->vdev)); 3466 3467 em28xx_uninit_usb_xfer(dev, EM28XX_ANALOG_MODE); 3468 em28xx_uninit_usb_xfer(dev, EM28XX_DIGITAL_MODE); 3469 } 3470 3471 em28xx_close_extension(dev); 3472 /* NOTE: must be called BEFORE the resources are released */ 3473 3474 if (!dev->users) 3475 em28xx_release_resources(dev); 3476 3477 mutex_unlock(&dev->lock); 3478 3479 if (!dev->users) { 3480 kfree(dev->alt_max_pkt_size_isoc); 3481 kfree(dev); 3482 } 3483 } 3484 3485 static struct usb_driver em28xx_usb_driver = { 3486 .name = "em28xx", 3487 .probe = em28xx_usb_probe, 3488 .disconnect = em28xx_usb_disconnect, 3489 .id_table = em28xx_id_table, 3490 }; 3491 3492 module_usb_driver(em28xx_usb_driver); 3493