1 /* 2 em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB 3 video capture devices 4 5 Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it> 6 Markus Rechberger <mrechberger@gmail.com> 7 Mauro Carvalho Chehab <mchehab@infradead.org> 8 Sascha Sommer <saschasommer@freenet.de> 9 Copyright (C) 2012 Frank Schäfer <fschaefer.oss@googlemail.com> 10 11 This program is free software; you can redistribute it and/or modify 12 it under the terms of the GNU General Public License as published by 13 the Free Software Foundation; either version 2 of the License, or 14 (at your option) any later version. 15 16 This program is distributed in the hope that it will be useful, 17 but WITHOUT ANY WARRANTY; without even the implied warranty of 18 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 GNU General Public License for more details. 20 21 You should have received a copy of the GNU General Public License 22 along with this program; if not, write to the Free Software 23 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 24 */ 25 26 #include <linux/init.h> 27 #include <linux/module.h> 28 #include <linux/slab.h> 29 #include <linux/delay.h> 30 #include <linux/i2c.h> 31 #include <linux/usb.h> 32 #include <media/tuner.h> 33 #include <media/msp3400.h> 34 #include <media/saa7115.h> 35 #include <media/tvp5150.h> 36 #include <media/tvaudio.h> 37 #include <media/i2c-addr.h> 38 #include <media/tveeprom.h> 39 #include <media/v4l2-common.h> 40 41 #include "em28xx.h" 42 43 #define DRIVER_NAME "em28xx" 44 45 static int tuner = -1; 46 module_param(tuner, int, 0444); 47 MODULE_PARM_DESC(tuner, "tuner type"); 48 49 static unsigned int disable_ir; 50 module_param(disable_ir, int, 0444); 51 MODULE_PARM_DESC(disable_ir, "disable infrared remote support"); 52 53 static unsigned int disable_usb_speed_check; 54 module_param(disable_usb_speed_check, int, 0444); 55 MODULE_PARM_DESC(disable_usb_speed_check, 56 "override min bandwidth requirement of 480M bps"); 57 58 static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U }; 59 module_param_array(card, int, NULL, 0444); 60 MODULE_PARM_DESC(card, "card type"); 61 62 static int usb_xfer_mode = -1; 63 module_param(usb_xfer_mode, int, 0444); 64 MODULE_PARM_DESC(usb_xfer_mode, 65 "USB transfer mode for frame data (-1 = auto, 0 = prefer isoc, 1 = prefer bulk)"); 66 67 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */ 68 static DECLARE_BITMAP(em28xx_devused, EM28XX_MAXBOARDS); 69 70 struct em28xx_hash_table { 71 unsigned long hash; 72 unsigned int model; 73 unsigned int tuner; 74 }; 75 76 static void em28xx_pre_card_setup(struct em28xx *dev); 77 78 /* 79 * Reset sequences for analog/digital modes 80 */ 81 82 /* Reset for the most [analog] boards */ 83 static struct em28xx_reg_seq default_analog[] = { 84 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 85 { -1, -1, -1, -1}, 86 }; 87 88 /* Reset for the most [digital] boards */ 89 static struct em28xx_reg_seq default_digital[] = { 90 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 91 { -1, -1, -1, -1}, 92 }; 93 94 /* Board Hauppauge WinTV HVR 900 analog */ 95 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = { 96 {EM2820_R08_GPIO_CTRL, 0x2d, ~EM_GPIO_4, 10}, 97 { 0x05, 0xff, 0x10, 10}, 98 { -1, -1, -1, -1}, 99 }; 100 101 /* Board Hauppauge WinTV HVR 900 digital */ 102 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = { 103 {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10}, 104 {EM2880_R04_GPO, 0x04, 0x0f, 10}, 105 {EM2880_R04_GPO, 0x0c, 0x0f, 10}, 106 { -1, -1, -1, -1}, 107 }; 108 109 /* Board Hauppauge WinTV HVR 900 (R2) digital */ 110 static struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = { 111 {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10}, 112 {EM2880_R04_GPO, 0x0c, 0x0f, 10}, 113 { -1, -1, -1, -1}, 114 }; 115 116 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */ 117 static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = { 118 {EM2820_R08_GPIO_CTRL, 0x69, ~EM_GPIO_4, 10}, 119 { -1, -1, -1, -1}, 120 }; 121 122 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */ 123 124 /* Board - EM2870 Kworld 355u 125 Analog - No input analog */ 126 127 /* Board - EM2882 Kworld 315U digital */ 128 static struct em28xx_reg_seq em2882_kworld_315u_digital[] = { 129 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 130 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, 131 {EM2880_R04_GPO, 0x04, 0xff, 10}, 132 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 133 {EM2820_R08_GPIO_CTRL, 0x7e, 0xff, 10}, 134 { -1, -1, -1, -1}, 135 }; 136 137 static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = { 138 {EM2880_R04_GPO, 0x08, 0xff, 10}, 139 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 140 {EM2880_R04_GPO, 0x08, 0xff, 10}, 141 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 142 { -1, -1, -1, -1}, 143 }; 144 145 static struct em28xx_reg_seq kworld_330u_analog[] = { 146 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 147 {EM2880_R04_GPO, 0x00, 0xff, 10}, 148 { -1, -1, -1, -1}, 149 }; 150 151 static struct em28xx_reg_seq kworld_330u_digital[] = { 152 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 153 {EM2880_R04_GPO, 0x08, 0xff, 10}, 154 { -1, -1, -1, -1}, 155 }; 156 157 /* Evga inDtube 158 GPIO0 - Enable digital power (s5h1409) - low to enable 159 GPIO1 - Enable analog power (tvp5150/emp202) - low to enable 160 GPIO4 - xc3028 reset 161 GOP3 - s5h1409 reset 162 */ 163 static struct em28xx_reg_seq evga_indtube_analog[] = { 164 {EM2820_R08_GPIO_CTRL, 0x79, 0xff, 60}, 165 { -1, -1, -1, -1}, 166 }; 167 168 static struct em28xx_reg_seq evga_indtube_digital[] = { 169 {EM2820_R08_GPIO_CTRL, 0x7a, 0xff, 1}, 170 {EM2880_R04_GPO, 0x04, 0xff, 10}, 171 {EM2880_R04_GPO, 0x0c, 0xff, 1}, 172 { -1, -1, -1, -1}, 173 }; 174 175 /* 176 * KWorld PlusTV 340U, UB435-Q and UB435-Q V2 (ATSC) GPIOs map: 177 * EM_GPIO_0 - currently unknown 178 * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on) 179 * EM_GPIO_2 - currently unknown 180 * EM_GPIO_3 - currently unknown 181 * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset) 182 * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset) 183 * EM_GPIO_6 - currently unknown 184 * EM_GPIO_7 - currently unknown 185 */ 186 static struct em28xx_reg_seq kworld_a340_digital[] = { 187 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 188 { -1, -1, -1, -1}, 189 }; 190 191 static struct em28xx_reg_seq kworld_ub435q_v3_digital[] = { 192 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100}, 193 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100}, 194 {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 100}, 195 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100}, 196 { -1, -1, -1, -1}, 197 }; 198 199 /* Pinnacle Hybrid Pro eb1a:2881 */ 200 static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = { 201 {EM2820_R08_GPIO_CTRL, 0xfd, ~EM_GPIO_4, 10}, 202 { -1, -1, -1, -1}, 203 }; 204 205 static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = { 206 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 207 {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */ 208 {EM2880_R04_GPO, 0x0c, 0xff, 1}, 209 { -1, -1, -1, -1}, 210 }; 211 212 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = { 213 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 214 {EM2880_R04_GPO, 0x00, 0xff, 10}, 215 { -1, -1, -1, -1}, 216 }; 217 218 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = { 219 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 220 {EM2880_R04_GPO, 0x08, 0xff, 10}, 221 { -1, -1, -1, -1}, 222 }; 223 224 /* PCTV HD Mini (80e) GPIOs 225 0-5: not used 226 6: demod reset, active low 227 7: LED on, active high */ 228 static struct em28xx_reg_seq em2874_pctv_80e_digital[] = { 229 {EM28XX_R06_I2C_CLK, 0x45, 0xff, 10}, /*400 KHz*/ 230 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 100},/*Demod reset*/ 231 {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 10}, 232 { -1, -1, -1, -1}, 233 }; 234 235 /* eb1a:2868 Reddo DVB-C USB TV Box 236 GPIO4 - CU1216L NIM 237 Other GPIOs seems to be don't care. */ 238 static struct em28xx_reg_seq reddo_dvb_c_usb_box[] = { 239 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, 240 {EM2820_R08_GPIO_CTRL, 0xde, 0xff, 10}, 241 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, 242 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 243 {EM2820_R08_GPIO_CTRL, 0x7f, 0xff, 10}, 244 {EM2820_R08_GPIO_CTRL, 0x6f, 0xff, 10}, 245 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 246 { -1, -1, -1, -1}, 247 }; 248 249 /* Callback for the most boards */ 250 static struct em28xx_reg_seq default_tuner_gpio[] = { 251 {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10}, 252 {EM2820_R08_GPIO_CTRL, 0, EM_GPIO_4, 10}, 253 {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10}, 254 { -1, -1, -1, -1}, 255 }; 256 257 /* Mute/unmute */ 258 static struct em28xx_reg_seq compro_unmute_tv_gpio[] = { 259 {EM2820_R08_GPIO_CTRL, 5, 7, 10}, 260 { -1, -1, -1, -1}, 261 }; 262 263 static struct em28xx_reg_seq compro_unmute_svid_gpio[] = { 264 {EM2820_R08_GPIO_CTRL, 4, 7, 10}, 265 { -1, -1, -1, -1}, 266 }; 267 268 static struct em28xx_reg_seq compro_mute_gpio[] = { 269 {EM2820_R08_GPIO_CTRL, 6, 7, 10}, 270 { -1, -1, -1, -1}, 271 }; 272 273 /* Terratec AV350 */ 274 static struct em28xx_reg_seq terratec_av350_mute_gpio[] = { 275 {EM2820_R08_GPIO_CTRL, 0xff, 0x7f, 10}, 276 { -1, -1, -1, -1}, 277 }; 278 279 static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = { 280 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 281 { -1, -1, -1, -1}, 282 }; 283 284 static struct em28xx_reg_seq silvercrest_reg_seq[] = { 285 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 286 {EM2820_R08_GPIO_CTRL, 0x01, 0xf7, 10}, 287 { -1, -1, -1, -1}, 288 }; 289 290 static struct em28xx_reg_seq vc211a_enable[] = { 291 {EM2820_R08_GPIO_CTRL, 0xff, 0x07, 10}, 292 {EM2820_R08_GPIO_CTRL, 0xff, 0x0f, 10}, 293 {EM2820_R08_GPIO_CTRL, 0xff, 0x0b, 10}, 294 { -1, -1, -1, -1}, 295 }; 296 297 static struct em28xx_reg_seq dikom_dk300_digital[] = { 298 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 299 {EM2880_R04_GPO, 0x08, 0xff, 10}, 300 { -1, -1, -1, -1}, 301 }; 302 303 /* Reset for the most [digital] boards */ 304 static struct em28xx_reg_seq leadership_digital[] = { 305 {EM2874_R80_GPIO_P0_CTRL, 0x70, 0xff, 10}, 306 { -1, -1, -1, -1}, 307 }; 308 309 static struct em28xx_reg_seq leadership_reset[] = { 310 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10}, 311 {EM2874_R80_GPIO_P0_CTRL, 0xb0, 0xff, 10}, 312 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10}, 313 { -1, -1, -1, -1}, 314 }; 315 316 /* 2013:024f PCTV nanoStick T2 290e 317 * GPIO_6 - demod reset 318 * GPIO_7 - LED 319 */ 320 static struct em28xx_reg_seq pctv_290e[] = { 321 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 80}, 322 {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 80}, /* GPIO_6 = 1 */ 323 {EM2874_R80_GPIO_P0_CTRL, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */ 324 { -1, -1, -1, -1}, 325 }; 326 327 #if 0 328 static struct em28xx_reg_seq terratec_h5_gpio[] = { 329 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 330 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100}, 331 {EM2874_R80_GPIO_P0_CTRL, 0xf2, 0xff, 50}, 332 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 50}, 333 { -1, -1, -1, -1}, 334 }; 335 336 static struct em28xx_reg_seq terratec_h5_digital[] = { 337 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10}, 338 {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, 339 {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10}, 340 { -1, -1, -1, -1}, 341 }; 342 #endif 343 344 /* 2013:024f PCTV DVB-S2 Stick 460e 345 * GPIO_0 - POWER_ON 346 * GPIO_1 - BOOST 347 * GPIO_2 - VUV_LNB (red LED) 348 * GPIO_3 - EXT_12V 349 * GPIO_4 - INT_DEM (DEMOD GPIO_0) 350 * GPIO_5 - INT_LNB 351 * GPIO_6 - RESET_DEM 352 * GPIO_7 - LED (green LED) 353 */ 354 static struct em28xx_reg_seq pctv_460e[] = { 355 {EM2874_R80_GPIO_P0_CTRL, 0x01, 0xff, 50}, 356 { 0x0d, 0xff, 0xff, 50}, 357 {EM2874_R80_GPIO_P0_CTRL, 0x41, 0xff, 50}, /* GPIO_6=1 */ 358 { 0x0d, 0x42, 0xff, 50}, 359 {EM2874_R80_GPIO_P0_CTRL, 0x61, 0xff, 50}, /* GPIO_5=1 */ 360 { -1, -1, -1, -1}, 361 }; 362 363 static struct em28xx_reg_seq c3tech_digital_duo_digital[] = { 364 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10}, 365 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, /* xc5000 reset */ 366 {EM2874_R80_GPIO_P0_CTRL, 0xf9, 0xff, 35}, 367 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, 368 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10}, 369 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 10}, 370 {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 10}, 371 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 20}, 372 { -1, -1, -1, -1}, 373 }; 374 375 /* 376 * 2013:0258 PCTV DVB-S2 Stick (461e) 377 * GPIO 0 = POWER_ON 378 * GPIO 1 = BOOST 379 * GPIO 2 = VUV_LNB (red LED) 380 * GPIO 3 = #EXT_12V 381 * GPIO 4 = INT_DEM 382 * GPIO 5 = INT_LNB 383 * GPIO 6 = #RESET_DEM 384 * GPIO 7 = P07_LED (green LED) 385 */ 386 static struct em28xx_reg_seq pctv_461e[] = { 387 {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 0}, 388 {0x0d, 0xff, 0xff, 0}, 389 {EM2874_R80_GPIO_P0_CTRL, 0x3f, 0xff, 100}, /* reset demod */ 390 {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 200}, /* reset demod */ 391 {0x0d, 0x42, 0xff, 0}, 392 {EM2874_R80_GPIO_P0_CTRL, 0xeb, 0xff, 0}, 393 {EM2874_R5F_TS_ENABLE, 0x84, 0x84, 0}, /* parallel? | null discard */ 394 { -1, -1, -1, -1}, 395 }; 396 397 #if 0 398 static struct em28xx_reg_seq hauppauge_930c_gpio[] = { 399 {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10}, 400 {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, /* xc5000 reset */ 401 {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10}, 402 {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, 403 { -1, -1, -1, -1}, 404 }; 405 406 static struct em28xx_reg_seq hauppauge_930c_digital[] = { 407 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10}, 408 {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, 409 {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10}, 410 { -1, -1, -1, -1}, 411 }; 412 #endif 413 414 /* 1b80:e425 MaxMedia UB425-TC 415 * 1b80:e1cc Delock 61959 416 * GPIO_6 - demod reset, 0=active 417 * GPIO_7 - LED, 0=active 418 */ 419 static struct em28xx_reg_seq maxmedia_ub425_tc[] = { 420 {EM2874_R80_GPIO_P0_CTRL, 0x83, 0xff, 100}, 421 {EM2874_R80_GPIO_P0_CTRL, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */ 422 {EM2874_R80_GPIO_P0_CTRL, 0x43, 0xff, 000}, /* GPIO_7 = 0 */ 423 { -1, -1, -1, -1}, 424 }; 425 426 /* 2304:0242 PCTV QuatroStick (510e) 427 * GPIO_2: decoder reset, 0=active 428 * GPIO_4: decoder suspend, 0=active 429 * GPIO_6: demod reset, 0=active 430 * GPIO_7: LED, 1=active 431 */ 432 static struct em28xx_reg_seq pctv_510e[] = { 433 {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100}, 434 {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ 435 {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ 436 { -1, -1, -1, -1}, 437 }; 438 439 /* 2013:0251 PCTV QuatroStick nano (520e) 440 * GPIO_2: decoder reset, 0=active 441 * GPIO_4: decoder suspend, 0=active 442 * GPIO_6: demod reset, 0=active 443 * GPIO_7: LED, 1=active 444 */ 445 static struct em28xx_reg_seq pctv_520e[] = { 446 {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100}, 447 {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ 448 {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ 449 {EM2874_R80_GPIO_P0_CTRL, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */ 450 { -1, -1, -1, -1}, 451 }; 452 453 /* 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam 454 * reg 0x80/0x84: 455 * GPIO_0: capturing LED, 0=on, 1=off 456 * GPIO_2: AV mute button, 0=pressed, 1=unpressed 457 * GPIO 3: illumination button, 0=pressed, 1=unpressed 458 * GPIO_6: illumination/flash LED, 0=on, 1=off 459 * reg 0x81/0x85: 460 * GPIO_7: snapshot button, 0=pressed, 1=unpressed 461 */ 462 static struct em28xx_reg_seq speedlink_vad_laplace_reg_seq[] = { 463 {EM2820_R08_GPIO_CTRL, 0xf7, 0xff, 10}, 464 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xb2, 10}, 465 { -1, -1, -1, -1}, 466 }; 467 468 static struct em28xx_reg_seq pctv_292e[] = { 469 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, 470 {0x0d, 0xff, 0xff, 950}, 471 {EM2874_R80_GPIO_P0_CTRL, 0xbd, 0xff, 100}, 472 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 410}, 473 {EM2874_R80_GPIO_P0_CTRL, 0x7d, 0xff, 300}, 474 {EM2874_R80_GPIO_P0_CTRL, 0x7c, 0xff, 60}, 475 {0x0d, 0x42, 0xff, 50}, 476 {EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0}, 477 {-1, -1, -1, -1}, 478 }; 479 480 static struct em28xx_reg_seq terratec_t2_stick_hd[] = { 481 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, 482 {0x0d, 0xff, 0xff, 600}, 483 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 10}, 484 {EM2874_R80_GPIO_P0_CTRL, 0xbc, 0xff, 100}, 485 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 100}, 486 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 300}, 487 {EM2874_R80_GPIO_P0_CTRL, 0xf8, 0xff, 100}, 488 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 300}, 489 {0x0d, 0x42, 0xff, 1000}, 490 {EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0}, 491 {-1, -1, -1, -1}, 492 }; 493 494 /* 495 * Button definitions 496 */ 497 static struct em28xx_button std_snapshot_button[] = { 498 { 499 .role = EM28XX_BUTTON_SNAPSHOT, 500 .reg_r = EM28XX_R0C_USBSUSP, 501 .reg_clearing = EM28XX_R0C_USBSUSP, 502 .mask = EM28XX_R0C_USBSUSP_SNAPSHOT, 503 .inverted = 0, 504 }, 505 {-1, 0, 0, 0, 0}, 506 }; 507 508 static struct em28xx_button speedlink_vad_laplace_buttons[] = { 509 { 510 .role = EM28XX_BUTTON_SNAPSHOT, 511 .reg_r = EM2874_R85_GPIO_P1_STATE, 512 .mask = 0x80, 513 .inverted = 1, 514 }, 515 { 516 .role = EM28XX_BUTTON_ILLUMINATION, 517 .reg_r = EM2874_R84_GPIO_P0_STATE, 518 .mask = 0x08, 519 .inverted = 1, 520 }, 521 {-1, 0, 0, 0, 0}, 522 }; 523 524 /* 525 * LED definitions 526 */ 527 static struct em28xx_led speedlink_vad_laplace_leds[] = { 528 { 529 .role = EM28XX_LED_ANALOG_CAPTURING, 530 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 531 .gpio_mask = 0x01, 532 .inverted = 1, 533 }, 534 { 535 .role = EM28XX_LED_ILLUMINATION, 536 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 537 .gpio_mask = 0x40, 538 .inverted = 1, 539 }, 540 {-1, 0, 0, 0}, 541 }; 542 543 static struct em28xx_led kworld_ub435q_v3_leds[] = { 544 { 545 .role = EM28XX_LED_DIGITAL_CAPTURING, 546 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 547 .gpio_mask = 0x80, 548 .inverted = 1, 549 }, 550 {-1, 0, 0, 0}, 551 }; 552 553 static struct em28xx_led pctv_80e_leds[] = { 554 { 555 .role = EM28XX_LED_DIGITAL_CAPTURING, 556 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 557 .gpio_mask = 0x80, 558 .inverted = 0, 559 }, 560 {-1, 0, 0, 0}, 561 }; 562 563 /* 564 * Board definitions 565 */ 566 struct em28xx_board em28xx_boards[] = { 567 [EM2750_BOARD_UNKNOWN] = { 568 .name = "EM2710/EM2750/EM2751 webcam grabber", 569 .xclk = EM28XX_XCLK_FREQUENCY_20MHZ, 570 .tuner_type = TUNER_ABSENT, 571 .is_webcam = 1, 572 .input = { { 573 .type = EM28XX_VMUX_COMPOSITE1, 574 .vmux = 0, 575 .amux = EM28XX_AMUX_VIDEO, 576 .gpio = silvercrest_reg_seq, 577 } }, 578 }, 579 [EM2800_BOARD_UNKNOWN] = { 580 .name = "Unknown EM2800 video grabber", 581 .is_em2800 = 1, 582 .tda9887_conf = TDA9887_PRESENT, 583 .decoder = EM28XX_SAA711X, 584 .tuner_type = TUNER_ABSENT, 585 .input = { { 586 .type = EM28XX_VMUX_COMPOSITE1, 587 .vmux = SAA7115_COMPOSITE0, 588 .amux = EM28XX_AMUX_LINE_IN, 589 }, { 590 .type = EM28XX_VMUX_SVIDEO, 591 .vmux = SAA7115_SVIDEO3, 592 .amux = EM28XX_AMUX_LINE_IN, 593 } }, 594 }, 595 [EM2820_BOARD_UNKNOWN] = { 596 .name = "Unknown EM2750/28xx video grabber", 597 .tuner_type = TUNER_ABSENT, 598 .is_webcam = 1, /* To enable sensor probe */ 599 }, 600 [EM2750_BOARD_DLCW_130] = { 601 /* Beijing Huaqi Information Digital Technology Co., Ltd */ 602 .name = "Huaqi DLCW-130", 603 .valid = EM28XX_BOARD_NOT_VALIDATED, 604 .xclk = EM28XX_XCLK_FREQUENCY_48MHZ, 605 .tuner_type = TUNER_ABSENT, 606 .is_webcam = 1, 607 .input = { { 608 .type = EM28XX_VMUX_COMPOSITE1, 609 .vmux = 0, 610 .amux = EM28XX_AMUX_VIDEO, 611 } }, 612 }, 613 [EM2820_BOARD_KWORLD_PVRTV2800RF] = { 614 .name = "Kworld PVR TV 2800 RF", 615 .tuner_type = TUNER_TEMIC_PAL, 616 .tda9887_conf = TDA9887_PRESENT, 617 .decoder = EM28XX_SAA711X, 618 .input = { { 619 .type = EM28XX_VMUX_COMPOSITE1, 620 .vmux = SAA7115_COMPOSITE0, 621 .amux = EM28XX_AMUX_LINE_IN, 622 }, { 623 .type = EM28XX_VMUX_SVIDEO, 624 .vmux = SAA7115_SVIDEO3, 625 .amux = EM28XX_AMUX_LINE_IN, 626 } }, 627 }, 628 [EM2820_BOARD_GADMEI_TVR200] = { 629 .name = "Gadmei TVR200", 630 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 631 .tda9887_conf = TDA9887_PRESENT, 632 .decoder = EM28XX_SAA711X, 633 .input = { { 634 .type = EM28XX_VMUX_TELEVISION, 635 .vmux = SAA7115_COMPOSITE2, 636 .amux = EM28XX_AMUX_LINE_IN, 637 }, { 638 .type = EM28XX_VMUX_COMPOSITE1, 639 .vmux = SAA7115_COMPOSITE0, 640 .amux = EM28XX_AMUX_LINE_IN, 641 }, { 642 .type = EM28XX_VMUX_SVIDEO, 643 .vmux = SAA7115_SVIDEO3, 644 .amux = EM28XX_AMUX_LINE_IN, 645 } }, 646 }, 647 [EM2820_BOARD_TERRATEC_CINERGY_250] = { 648 .name = "Terratec Cinergy 250 USB", 649 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 650 .has_ir_i2c = 1, 651 .tda9887_conf = TDA9887_PRESENT, 652 .decoder = EM28XX_SAA711X, 653 .input = { { 654 .type = EM28XX_VMUX_TELEVISION, 655 .vmux = SAA7115_COMPOSITE2, 656 .amux = EM28XX_AMUX_VIDEO, 657 }, { 658 .type = EM28XX_VMUX_COMPOSITE1, 659 .vmux = SAA7115_COMPOSITE0, 660 .amux = EM28XX_AMUX_LINE_IN, 661 }, { 662 .type = EM28XX_VMUX_SVIDEO, 663 .vmux = SAA7115_SVIDEO3, 664 .amux = EM28XX_AMUX_LINE_IN, 665 } }, 666 }, 667 [EM2820_BOARD_PINNACLE_USB_2] = { 668 .name = "Pinnacle PCTV USB 2", 669 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 670 .has_ir_i2c = 1, 671 .tda9887_conf = TDA9887_PRESENT, 672 .decoder = EM28XX_SAA711X, 673 .input = { { 674 .type = EM28XX_VMUX_TELEVISION, 675 .vmux = SAA7115_COMPOSITE2, 676 .amux = EM28XX_AMUX_VIDEO, 677 }, { 678 .type = EM28XX_VMUX_COMPOSITE1, 679 .vmux = SAA7115_COMPOSITE0, 680 .amux = EM28XX_AMUX_LINE_IN, 681 }, { 682 .type = EM28XX_VMUX_SVIDEO, 683 .vmux = SAA7115_SVIDEO3, 684 .amux = EM28XX_AMUX_LINE_IN, 685 } }, 686 }, 687 [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = { 688 .name = "Hauppauge WinTV USB 2", 689 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 690 .tda9887_conf = TDA9887_PRESENT | 691 TDA9887_PORT1_ACTIVE | 692 TDA9887_PORT2_ACTIVE, 693 .decoder = EM28XX_TVP5150, 694 .has_msp34xx = 1, 695 .has_ir_i2c = 1, 696 .input = { { 697 .type = EM28XX_VMUX_TELEVISION, 698 .vmux = TVP5150_COMPOSITE0, 699 .amux = MSP_INPUT_DEFAULT, 700 }, { 701 .type = EM28XX_VMUX_SVIDEO, 702 .vmux = TVP5150_SVIDEO, 703 .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1, 704 MSP_DSP_IN_SCART, MSP_DSP_IN_SCART), 705 } }, 706 }, 707 [EM2820_BOARD_DLINK_USB_TV] = { 708 .name = "D-Link DUB-T210 TV Tuner", 709 .valid = EM28XX_BOARD_NOT_VALIDATED, 710 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 711 .tda9887_conf = TDA9887_PRESENT, 712 .decoder = EM28XX_SAA711X, 713 .input = { { 714 .type = EM28XX_VMUX_TELEVISION, 715 .vmux = SAA7115_COMPOSITE2, 716 .amux = EM28XX_AMUX_LINE_IN, 717 }, { 718 .type = EM28XX_VMUX_COMPOSITE1, 719 .vmux = SAA7115_COMPOSITE0, 720 .amux = EM28XX_AMUX_LINE_IN, 721 }, { 722 .type = EM28XX_VMUX_SVIDEO, 723 .vmux = SAA7115_SVIDEO3, 724 .amux = EM28XX_AMUX_LINE_IN, 725 } }, 726 }, 727 [EM2820_BOARD_HERCULES_SMART_TV_USB2] = { 728 .name = "Hercules Smart TV USB 2.0", 729 .valid = EM28XX_BOARD_NOT_VALIDATED, 730 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 731 .tda9887_conf = TDA9887_PRESENT, 732 .decoder = EM28XX_SAA711X, 733 .input = { { 734 .type = EM28XX_VMUX_TELEVISION, 735 .vmux = SAA7115_COMPOSITE2, 736 .amux = EM28XX_AMUX_LINE_IN, 737 }, { 738 .type = EM28XX_VMUX_COMPOSITE1, 739 .vmux = SAA7115_COMPOSITE0, 740 .amux = EM28XX_AMUX_LINE_IN, 741 }, { 742 .type = EM28XX_VMUX_SVIDEO, 743 .vmux = SAA7115_SVIDEO3, 744 .amux = EM28XX_AMUX_LINE_IN, 745 } }, 746 }, 747 [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = { 748 .name = "Pinnacle PCTV USB 2 (Philips FM1216ME)", 749 .valid = EM28XX_BOARD_NOT_VALIDATED, 750 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, 751 .tda9887_conf = TDA9887_PRESENT, 752 .decoder = EM28XX_SAA711X, 753 .input = { { 754 .type = EM28XX_VMUX_TELEVISION, 755 .vmux = SAA7115_COMPOSITE2, 756 .amux = EM28XX_AMUX_VIDEO, 757 }, { 758 .type = EM28XX_VMUX_COMPOSITE1, 759 .vmux = SAA7115_COMPOSITE0, 760 .amux = EM28XX_AMUX_LINE_IN, 761 }, { 762 .type = EM28XX_VMUX_SVIDEO, 763 .vmux = SAA7115_SVIDEO3, 764 .amux = EM28XX_AMUX_LINE_IN, 765 } }, 766 }, 767 [EM2820_BOARD_GADMEI_UTV310] = { 768 .name = "Gadmei UTV310", 769 .valid = EM28XX_BOARD_NOT_VALIDATED, 770 .tuner_type = TUNER_TNF_5335MF, 771 .tda9887_conf = TDA9887_PRESENT, 772 .decoder = EM28XX_SAA711X, 773 .input = { { 774 .type = EM28XX_VMUX_TELEVISION, 775 .vmux = SAA7115_COMPOSITE1, 776 .amux = EM28XX_AMUX_LINE_IN, 777 }, { 778 .type = EM28XX_VMUX_COMPOSITE1, 779 .vmux = SAA7115_COMPOSITE0, 780 .amux = EM28XX_AMUX_LINE_IN, 781 }, { 782 .type = EM28XX_VMUX_SVIDEO, 783 .vmux = SAA7115_SVIDEO3, 784 .amux = EM28XX_AMUX_LINE_IN, 785 } }, 786 }, 787 [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = { 788 .name = "Leadtek Winfast USB II Deluxe", 789 .valid = EM28XX_BOARD_NOT_VALIDATED, 790 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, 791 .has_ir_i2c = 1, 792 .tvaudio_addr = 0x58, 793 .tda9887_conf = TDA9887_PRESENT | 794 TDA9887_PORT2_ACTIVE | 795 TDA9887_QSS, 796 .decoder = EM28XX_SAA711X, 797 .adecoder = EM28XX_TVAUDIO, 798 .input = { { 799 .type = EM28XX_VMUX_TELEVISION, 800 .vmux = SAA7115_COMPOSITE4, 801 .amux = EM28XX_AMUX_AUX, 802 }, { 803 .type = EM28XX_VMUX_COMPOSITE1, 804 .vmux = SAA7115_COMPOSITE5, 805 .amux = EM28XX_AMUX_LINE_IN, 806 }, { 807 .type = EM28XX_VMUX_SVIDEO, 808 .vmux = SAA7115_SVIDEO3, 809 .amux = EM28XX_AMUX_LINE_IN, 810 } }, 811 .radio = { 812 .type = EM28XX_RADIO, 813 .amux = EM28XX_AMUX_AUX, 814 } 815 }, 816 [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = { 817 .name = "Videology 20K14XUSB USB2.0", 818 .valid = EM28XX_BOARD_NOT_VALIDATED, 819 .tuner_type = TUNER_ABSENT, 820 .is_webcam = 1, 821 .input = { { 822 .type = EM28XX_VMUX_COMPOSITE1, 823 .vmux = 0, 824 .amux = EM28XX_AMUX_VIDEO, 825 } }, 826 }, 827 [EM2820_BOARD_SILVERCREST_WEBCAM] = { 828 .name = "Silvercrest Webcam 1.3mpix", 829 .tuner_type = TUNER_ABSENT, 830 .is_webcam = 1, 831 .input = { { 832 .type = EM28XX_VMUX_COMPOSITE1, 833 .vmux = 0, 834 .amux = EM28XX_AMUX_VIDEO, 835 .gpio = silvercrest_reg_seq, 836 } }, 837 }, 838 [EM2821_BOARD_SUPERCOMP_USB_2] = { 839 .name = "Supercomp USB 2.0 TV", 840 .valid = EM28XX_BOARD_NOT_VALIDATED, 841 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 842 .tda9887_conf = TDA9887_PRESENT | 843 TDA9887_PORT1_ACTIVE | 844 TDA9887_PORT2_ACTIVE, 845 .decoder = EM28XX_SAA711X, 846 .input = { { 847 .type = EM28XX_VMUX_TELEVISION, 848 .vmux = SAA7115_COMPOSITE2, 849 .amux = EM28XX_AMUX_LINE_IN, 850 }, { 851 .type = EM28XX_VMUX_COMPOSITE1, 852 .vmux = SAA7115_COMPOSITE0, 853 .amux = EM28XX_AMUX_VIDEO, 854 }, { 855 .type = EM28XX_VMUX_SVIDEO, 856 .vmux = SAA7115_SVIDEO3, 857 .amux = EM28XX_AMUX_LINE_IN, 858 } }, 859 }, 860 [EM2821_BOARD_USBGEAR_VD204] = { 861 .name = "Usbgear VD204v9", 862 .valid = EM28XX_BOARD_NOT_VALIDATED, 863 .tuner_type = TUNER_ABSENT, /* Capture only device */ 864 .decoder = EM28XX_SAA711X, 865 .input = { { 866 .type = EM28XX_VMUX_COMPOSITE1, 867 .vmux = SAA7115_COMPOSITE0, 868 .amux = EM28XX_AMUX_LINE_IN, 869 }, { 870 .type = EM28XX_VMUX_SVIDEO, 871 .vmux = SAA7115_SVIDEO3, 872 .amux = EM28XX_AMUX_LINE_IN, 873 } }, 874 }, 875 [EM2860_BOARD_NETGMBH_CAM] = { 876 /* Beijing Huaqi Information Digital Technology Co., Ltd */ 877 .name = "NetGMBH Cam", 878 .valid = EM28XX_BOARD_NOT_VALIDATED, 879 .tuner_type = TUNER_ABSENT, 880 .is_webcam = 1, 881 .input = { { 882 .type = EM28XX_VMUX_COMPOSITE1, 883 .vmux = 0, 884 .amux = EM28XX_AMUX_VIDEO, 885 } }, 886 }, 887 [EM2860_BOARD_TYPHOON_DVD_MAKER] = { 888 .name = "Typhoon DVD Maker", 889 .decoder = EM28XX_SAA711X, 890 .tuner_type = TUNER_ABSENT, /* Capture only device */ 891 .input = { { 892 .type = EM28XX_VMUX_COMPOSITE1, 893 .vmux = SAA7115_COMPOSITE0, 894 .amux = EM28XX_AMUX_LINE_IN, 895 }, { 896 .type = EM28XX_VMUX_SVIDEO, 897 .vmux = SAA7115_SVIDEO3, 898 .amux = EM28XX_AMUX_LINE_IN, 899 } }, 900 }, 901 [EM2860_BOARD_GADMEI_UTV330] = { 902 .name = "Gadmei UTV330", 903 .valid = EM28XX_BOARD_NOT_VALIDATED, 904 .tuner_type = TUNER_TNF_5335MF, 905 .tda9887_conf = TDA9887_PRESENT, 906 .decoder = EM28XX_SAA711X, 907 .input = { { 908 .type = EM28XX_VMUX_TELEVISION, 909 .vmux = SAA7115_COMPOSITE2, 910 .amux = EM28XX_AMUX_VIDEO, 911 }, { 912 .type = EM28XX_VMUX_COMPOSITE1, 913 .vmux = SAA7115_COMPOSITE0, 914 .amux = EM28XX_AMUX_LINE_IN, 915 }, { 916 .type = EM28XX_VMUX_SVIDEO, 917 .vmux = SAA7115_SVIDEO3, 918 .amux = EM28XX_AMUX_LINE_IN, 919 } }, 920 }, 921 [EM2861_BOARD_GADMEI_UTV330PLUS] = { 922 .name = "Gadmei UTV330+", 923 .tuner_type = TUNER_TNF_5335MF, 924 .tda9887_conf = TDA9887_PRESENT, 925 .ir_codes = RC_MAP_GADMEI_RM008Z, 926 .decoder = EM28XX_SAA711X, 927 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 928 .input = { { 929 .type = EM28XX_VMUX_TELEVISION, 930 .vmux = SAA7115_COMPOSITE2, 931 .amux = EM28XX_AMUX_VIDEO, 932 }, { 933 .type = EM28XX_VMUX_COMPOSITE1, 934 .vmux = SAA7115_COMPOSITE0, 935 .amux = EM28XX_AMUX_LINE_IN, 936 }, { 937 .type = EM28XX_VMUX_SVIDEO, 938 .vmux = SAA7115_SVIDEO3, 939 .amux = EM28XX_AMUX_LINE_IN, 940 } }, 941 }, 942 [EM2860_BOARD_TERRATEC_HYBRID_XS] = { 943 .name = "Terratec Cinergy A Hybrid XS", 944 .valid = EM28XX_BOARD_NOT_VALIDATED, 945 .tuner_type = TUNER_XC2028, 946 .tuner_gpio = default_tuner_gpio, 947 .decoder = EM28XX_TVP5150, 948 949 .input = { { 950 .type = EM28XX_VMUX_TELEVISION, 951 .vmux = TVP5150_COMPOSITE0, 952 .amux = EM28XX_AMUX_VIDEO, 953 .gpio = hauppauge_wintv_hvr_900_analog, 954 }, { 955 .type = EM28XX_VMUX_COMPOSITE1, 956 .vmux = TVP5150_COMPOSITE1, 957 .amux = EM28XX_AMUX_LINE_IN, 958 .gpio = hauppauge_wintv_hvr_900_analog, 959 }, { 960 .type = EM28XX_VMUX_SVIDEO, 961 .vmux = TVP5150_SVIDEO, 962 .amux = EM28XX_AMUX_LINE_IN, 963 .gpio = hauppauge_wintv_hvr_900_analog, 964 } }, 965 }, 966 [EM2861_BOARD_KWORLD_PVRTV_300U] = { 967 .name = "KWorld PVRTV 300U", 968 .valid = EM28XX_BOARD_NOT_VALIDATED, 969 .tuner_type = TUNER_XC2028, 970 .tuner_gpio = default_tuner_gpio, 971 .decoder = EM28XX_TVP5150, 972 .input = { { 973 .type = EM28XX_VMUX_TELEVISION, 974 .vmux = TVP5150_COMPOSITE0, 975 .amux = EM28XX_AMUX_VIDEO, 976 }, { 977 .type = EM28XX_VMUX_COMPOSITE1, 978 .vmux = TVP5150_COMPOSITE1, 979 .amux = EM28XX_AMUX_LINE_IN, 980 }, { 981 .type = EM28XX_VMUX_SVIDEO, 982 .vmux = TVP5150_SVIDEO, 983 .amux = EM28XX_AMUX_LINE_IN, 984 } }, 985 }, 986 [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = { 987 .name = "Yakumo MovieMixer", 988 .tuner_type = TUNER_ABSENT, /* Capture only device */ 989 .decoder = EM28XX_TVP5150, 990 .input = { { 991 .type = EM28XX_VMUX_TELEVISION, 992 .vmux = TVP5150_COMPOSITE0, 993 .amux = EM28XX_AMUX_VIDEO, 994 }, { 995 .type = EM28XX_VMUX_COMPOSITE1, 996 .vmux = TVP5150_COMPOSITE1, 997 .amux = EM28XX_AMUX_LINE_IN, 998 }, { 999 .type = EM28XX_VMUX_SVIDEO, 1000 .vmux = TVP5150_SVIDEO, 1001 .amux = EM28XX_AMUX_LINE_IN, 1002 } }, 1003 }, 1004 [EM2860_BOARD_TVP5150_REFERENCE_DESIGN] = { 1005 .name = "EM2860/TVP5150 Reference Design", 1006 .tuner_type = TUNER_ABSENT, /* Capture only device */ 1007 .decoder = EM28XX_TVP5150, 1008 .input = { { 1009 .type = EM28XX_VMUX_COMPOSITE1, 1010 .vmux = TVP5150_COMPOSITE1, 1011 .amux = EM28XX_AMUX_LINE_IN, 1012 }, { 1013 .type = EM28XX_VMUX_SVIDEO, 1014 .vmux = TVP5150_SVIDEO, 1015 .amux = EM28XX_AMUX_LINE_IN, 1016 } }, 1017 }, 1018 [EM2861_BOARD_PLEXTOR_PX_TV100U] = { 1019 .name = "Plextor ConvertX PX-TV100U", 1020 .tuner_type = TUNER_TNF_5335MF, 1021 .xclk = EM28XX_XCLK_I2S_MSB_TIMING | 1022 EM28XX_XCLK_FREQUENCY_12MHZ, 1023 .tda9887_conf = TDA9887_PRESENT, 1024 .decoder = EM28XX_TVP5150, 1025 .has_msp34xx = 1, 1026 .input = { { 1027 .type = EM28XX_VMUX_TELEVISION, 1028 .vmux = TVP5150_COMPOSITE0, 1029 .amux = EM28XX_AMUX_LINE_IN, 1030 .gpio = pinnacle_hybrid_pro_analog, 1031 }, { 1032 .type = EM28XX_VMUX_COMPOSITE1, 1033 .vmux = TVP5150_COMPOSITE1, 1034 .amux = EM28XX_AMUX_LINE_IN, 1035 .gpio = pinnacle_hybrid_pro_analog, 1036 }, { 1037 .type = EM28XX_VMUX_SVIDEO, 1038 .vmux = TVP5150_SVIDEO, 1039 .amux = EM28XX_AMUX_LINE_IN, 1040 .gpio = pinnacle_hybrid_pro_analog, 1041 } }, 1042 }, 1043 1044 /* Those boards with em2870 are DVB Only*/ 1045 1046 [EM2870_BOARD_TERRATEC_XS] = { 1047 .name = "Terratec Cinergy T XS", 1048 .valid = EM28XX_BOARD_NOT_VALIDATED, 1049 .tuner_type = TUNER_XC2028, 1050 .tuner_gpio = default_tuner_gpio, 1051 }, 1052 [EM2870_BOARD_TERRATEC_XS_MT2060] = { 1053 .name = "Terratec Cinergy T XS (MT2060)", 1054 .valid = EM28XX_BOARD_NOT_VALIDATED, 1055 .tuner_type = TUNER_ABSENT, /* MT2060 */ 1056 }, 1057 [EM2870_BOARD_KWORLD_350U] = { 1058 .name = "Kworld 350 U DVB-T", 1059 .valid = EM28XX_BOARD_NOT_VALIDATED, 1060 .tuner_type = TUNER_XC2028, 1061 .tuner_gpio = default_tuner_gpio, 1062 }, 1063 [EM2870_BOARD_KWORLD_355U] = { 1064 .name = "Kworld 355 U DVB-T", 1065 .valid = EM28XX_BOARD_NOT_VALIDATED, 1066 .tuner_type = TUNER_ABSENT, 1067 .tuner_gpio = default_tuner_gpio, 1068 .has_dvb = 1, 1069 .dvb_gpio = default_digital, 1070 }, 1071 [EM2870_BOARD_PINNACLE_PCTV_DVB] = { 1072 .name = "Pinnacle PCTV DVB-T", 1073 .valid = EM28XX_BOARD_NOT_VALIDATED, 1074 .tuner_type = TUNER_ABSENT, /* MT2060 */ 1075 /* djh - I have serious doubts this is right... */ 1076 .xclk = EM28XX_XCLK_IR_RC5_MODE | 1077 EM28XX_XCLK_FREQUENCY_10MHZ, 1078 }, 1079 [EM2870_BOARD_COMPRO_VIDEOMATE] = { 1080 .name = "Compro, VideoMate U3", 1081 .valid = EM28XX_BOARD_NOT_VALIDATED, 1082 .tuner_type = TUNER_ABSENT, /* MT2060 */ 1083 }, 1084 1085 [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = { 1086 .name = "Terratec Hybrid XS Secam", 1087 .has_msp34xx = 1, 1088 .tuner_type = TUNER_XC2028, 1089 .tuner_gpio = default_tuner_gpio, 1090 .decoder = EM28XX_TVP5150, 1091 .has_dvb = 1, 1092 .dvb_gpio = terratec_cinergy_USB_XS_FR_digital, 1093 .input = { { 1094 .type = EM28XX_VMUX_TELEVISION, 1095 .vmux = TVP5150_COMPOSITE0, 1096 .amux = EM28XX_AMUX_VIDEO, 1097 .gpio = terratec_cinergy_USB_XS_FR_analog, 1098 }, { 1099 .type = EM28XX_VMUX_COMPOSITE1, 1100 .vmux = TVP5150_COMPOSITE1, 1101 .amux = EM28XX_AMUX_LINE_IN, 1102 .gpio = terratec_cinergy_USB_XS_FR_analog, 1103 }, { 1104 .type = EM28XX_VMUX_SVIDEO, 1105 .vmux = TVP5150_SVIDEO, 1106 .amux = EM28XX_AMUX_LINE_IN, 1107 .gpio = terratec_cinergy_USB_XS_FR_analog, 1108 } }, 1109 }, 1110 [EM2884_BOARD_TERRATEC_H5] = { 1111 .name = "Terratec Cinergy H5", 1112 .has_dvb = 1, 1113 #if 0 1114 .tuner_type = TUNER_PHILIPS_TDA8290, 1115 .tuner_addr = 0x41, 1116 .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */ 1117 .tuner_gpio = terratec_h5_gpio, 1118 #else 1119 .tuner_type = TUNER_ABSENT, 1120 #endif 1121 .def_i2c_bus = 1, 1122 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1123 EM28XX_I2C_FREQ_400_KHZ, 1124 }, 1125 [EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = { 1126 .name = "Hauppauge WinTV HVR 930C", 1127 .has_dvb = 1, 1128 #if 0 /* FIXME: Add analog support */ 1129 .tuner_type = TUNER_XC5000, 1130 .tuner_addr = 0x41, 1131 .dvb_gpio = hauppauge_930c_digital, 1132 .tuner_gpio = hauppauge_930c_gpio, 1133 #else 1134 .tuner_type = TUNER_ABSENT, 1135 #endif 1136 .ir_codes = RC_MAP_HAUPPAUGE, 1137 .def_i2c_bus = 1, 1138 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1139 EM28XX_I2C_FREQ_400_KHZ, 1140 }, 1141 [EM2884_BOARD_C3TECH_DIGITAL_DUO] = { 1142 .name = "C3 Tech Digital Duo HDTV/SDTV USB", 1143 .has_dvb = 1, 1144 /* FIXME: Add analog support - need a saa7136 driver */ 1145 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */ 1146 .ir_codes = RC_MAP_EMPTY, 1147 .def_i2c_bus = 1, 1148 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 1149 .dvb_gpio = c3tech_digital_duo_digital, 1150 }, 1151 [EM2884_BOARD_CINERGY_HTC_STICK] = { 1152 .name = "Terratec Cinergy HTC Stick", 1153 .has_dvb = 1, 1154 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, 1155 .tuner_type = TUNER_ABSENT, 1156 .def_i2c_bus = 1, 1157 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1158 EM28XX_I2C_FREQ_400_KHZ, 1159 }, 1160 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = { 1161 .name = "Hauppauge WinTV HVR 900", 1162 .tda9887_conf = TDA9887_PRESENT, 1163 .tuner_type = TUNER_XC2028, 1164 .tuner_gpio = default_tuner_gpio, 1165 .mts_firmware = 1, 1166 .has_dvb = 1, 1167 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1168 .ir_codes = RC_MAP_HAUPPAUGE, 1169 .decoder = EM28XX_TVP5150, 1170 .input = { { 1171 .type = EM28XX_VMUX_TELEVISION, 1172 .vmux = TVP5150_COMPOSITE0, 1173 .amux = EM28XX_AMUX_VIDEO, 1174 .gpio = hauppauge_wintv_hvr_900_analog, 1175 }, { 1176 .type = EM28XX_VMUX_COMPOSITE1, 1177 .vmux = TVP5150_COMPOSITE1, 1178 .amux = EM28XX_AMUX_LINE_IN, 1179 .gpio = hauppauge_wintv_hvr_900_analog, 1180 }, { 1181 .type = EM28XX_VMUX_SVIDEO, 1182 .vmux = TVP5150_SVIDEO, 1183 .amux = EM28XX_AMUX_LINE_IN, 1184 .gpio = hauppauge_wintv_hvr_900_analog, 1185 } }, 1186 }, 1187 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = { 1188 .name = "Hauppauge WinTV HVR 900 (R2)", 1189 .tda9887_conf = TDA9887_PRESENT, 1190 .tuner_type = TUNER_XC2028, 1191 .tuner_gpio = default_tuner_gpio, 1192 .mts_firmware = 1, 1193 .has_dvb = 1, 1194 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, 1195 .ir_codes = RC_MAP_HAUPPAUGE, 1196 .decoder = EM28XX_TVP5150, 1197 .input = { { 1198 .type = EM28XX_VMUX_TELEVISION, 1199 .vmux = TVP5150_COMPOSITE0, 1200 .amux = EM28XX_AMUX_VIDEO, 1201 .gpio = hauppauge_wintv_hvr_900_analog, 1202 }, { 1203 .type = EM28XX_VMUX_COMPOSITE1, 1204 .vmux = TVP5150_COMPOSITE1, 1205 .amux = EM28XX_AMUX_LINE_IN, 1206 .gpio = hauppauge_wintv_hvr_900_analog, 1207 }, { 1208 .type = EM28XX_VMUX_SVIDEO, 1209 .vmux = TVP5150_SVIDEO, 1210 .amux = EM28XX_AMUX_LINE_IN, 1211 .gpio = hauppauge_wintv_hvr_900_analog, 1212 } }, 1213 }, 1214 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = { 1215 .name = "Hauppauge WinTV HVR 850", 1216 .tuner_type = TUNER_XC2028, 1217 .tuner_gpio = default_tuner_gpio, 1218 .mts_firmware = 1, 1219 .has_dvb = 1, 1220 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1221 .ir_codes = RC_MAP_HAUPPAUGE, 1222 .decoder = EM28XX_TVP5150, 1223 .input = { { 1224 .type = EM28XX_VMUX_TELEVISION, 1225 .vmux = TVP5150_COMPOSITE0, 1226 .amux = EM28XX_AMUX_VIDEO, 1227 .gpio = hauppauge_wintv_hvr_900_analog, 1228 }, { 1229 .type = EM28XX_VMUX_COMPOSITE1, 1230 .vmux = TVP5150_COMPOSITE1, 1231 .amux = EM28XX_AMUX_LINE_IN, 1232 .gpio = hauppauge_wintv_hvr_900_analog, 1233 }, { 1234 .type = EM28XX_VMUX_SVIDEO, 1235 .vmux = TVP5150_SVIDEO, 1236 .amux = EM28XX_AMUX_LINE_IN, 1237 .gpio = hauppauge_wintv_hvr_900_analog, 1238 } }, 1239 }, 1240 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = { 1241 .name = "Hauppauge WinTV HVR 950", 1242 .tuner_type = TUNER_XC2028, 1243 .tuner_gpio = default_tuner_gpio, 1244 .mts_firmware = 1, 1245 .has_dvb = 1, 1246 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1247 .ir_codes = RC_MAP_HAUPPAUGE, 1248 .decoder = EM28XX_TVP5150, 1249 .input = { { 1250 .type = EM28XX_VMUX_TELEVISION, 1251 .vmux = TVP5150_COMPOSITE0, 1252 .amux = EM28XX_AMUX_VIDEO, 1253 .gpio = hauppauge_wintv_hvr_900_analog, 1254 }, { 1255 .type = EM28XX_VMUX_COMPOSITE1, 1256 .vmux = TVP5150_COMPOSITE1, 1257 .amux = EM28XX_AMUX_LINE_IN, 1258 .gpio = hauppauge_wintv_hvr_900_analog, 1259 }, { 1260 .type = EM28XX_VMUX_SVIDEO, 1261 .vmux = TVP5150_SVIDEO, 1262 .amux = EM28XX_AMUX_LINE_IN, 1263 .gpio = hauppauge_wintv_hvr_900_analog, 1264 } }, 1265 }, 1266 [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = { 1267 .name = "Pinnacle PCTV HD Pro Stick", 1268 .tuner_type = TUNER_XC2028, 1269 .tuner_gpio = default_tuner_gpio, 1270 .mts_firmware = 1, 1271 .has_dvb = 1, 1272 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1273 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 1274 .decoder = EM28XX_TVP5150, 1275 .input = { { 1276 .type = EM28XX_VMUX_TELEVISION, 1277 .vmux = TVP5150_COMPOSITE0, 1278 .amux = EM28XX_AMUX_VIDEO, 1279 .gpio = hauppauge_wintv_hvr_900_analog, 1280 }, { 1281 .type = EM28XX_VMUX_COMPOSITE1, 1282 .vmux = TVP5150_COMPOSITE1, 1283 .amux = EM28XX_AMUX_LINE_IN, 1284 .gpio = hauppauge_wintv_hvr_900_analog, 1285 }, { 1286 .type = EM28XX_VMUX_SVIDEO, 1287 .vmux = TVP5150_SVIDEO, 1288 .amux = EM28XX_AMUX_LINE_IN, 1289 .gpio = hauppauge_wintv_hvr_900_analog, 1290 } }, 1291 }, 1292 [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = { 1293 .name = "AMD ATI TV Wonder HD 600", 1294 .tuner_type = TUNER_XC2028, 1295 .tuner_gpio = default_tuner_gpio, 1296 .mts_firmware = 1, 1297 .has_dvb = 1, 1298 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1299 .ir_codes = RC_MAP_ATI_TV_WONDER_HD_600, 1300 .decoder = EM28XX_TVP5150, 1301 .input = { { 1302 .type = EM28XX_VMUX_TELEVISION, 1303 .vmux = TVP5150_COMPOSITE0, 1304 .amux = EM28XX_AMUX_VIDEO, 1305 .gpio = hauppauge_wintv_hvr_900_analog, 1306 }, { 1307 .type = EM28XX_VMUX_COMPOSITE1, 1308 .vmux = TVP5150_COMPOSITE1, 1309 .amux = EM28XX_AMUX_LINE_IN, 1310 .gpio = hauppauge_wintv_hvr_900_analog, 1311 }, { 1312 .type = EM28XX_VMUX_SVIDEO, 1313 .vmux = TVP5150_SVIDEO, 1314 .amux = EM28XX_AMUX_LINE_IN, 1315 .gpio = hauppauge_wintv_hvr_900_analog, 1316 } }, 1317 }, 1318 [EM2880_BOARD_TERRATEC_HYBRID_XS] = { 1319 .name = "Terratec Hybrid XS", 1320 .tuner_type = TUNER_XC2028, 1321 .tuner_gpio = default_tuner_gpio, 1322 .decoder = EM28XX_TVP5150, 1323 .has_dvb = 1, 1324 .dvb_gpio = default_digital, 1325 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS, 1326 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 1327 .input = { { 1328 .type = EM28XX_VMUX_TELEVISION, 1329 .vmux = TVP5150_COMPOSITE0, 1330 .amux = EM28XX_AMUX_VIDEO, 1331 .gpio = default_analog, 1332 }, { 1333 .type = EM28XX_VMUX_COMPOSITE1, 1334 .vmux = TVP5150_COMPOSITE1, 1335 .amux = EM28XX_AMUX_LINE_IN, 1336 .gpio = default_analog, 1337 }, { 1338 .type = EM28XX_VMUX_SVIDEO, 1339 .vmux = TVP5150_SVIDEO, 1340 .amux = EM28XX_AMUX_LINE_IN, 1341 .gpio = default_analog, 1342 } }, 1343 }, 1344 /* maybe there's a reason behind it why Terratec sells the Hybrid XS 1345 as Prodigy XS with a different PID, let's keep it separated for now 1346 maybe we'll need it lateron */ 1347 [EM2880_BOARD_TERRATEC_PRODIGY_XS] = { 1348 .name = "Terratec Prodigy XS", 1349 .tuner_type = TUNER_XC2028, 1350 .tuner_gpio = default_tuner_gpio, 1351 .decoder = EM28XX_TVP5150, 1352 .input = { { 1353 .type = EM28XX_VMUX_TELEVISION, 1354 .vmux = TVP5150_COMPOSITE0, 1355 .amux = EM28XX_AMUX_VIDEO, 1356 .gpio = hauppauge_wintv_hvr_900_analog, 1357 }, { 1358 .type = EM28XX_VMUX_COMPOSITE1, 1359 .vmux = TVP5150_COMPOSITE1, 1360 .amux = EM28XX_AMUX_LINE_IN, 1361 .gpio = hauppauge_wintv_hvr_900_analog, 1362 }, { 1363 .type = EM28XX_VMUX_SVIDEO, 1364 .vmux = TVP5150_SVIDEO, 1365 .amux = EM28XX_AMUX_LINE_IN, 1366 .gpio = hauppauge_wintv_hvr_900_analog, 1367 } }, 1368 }, 1369 [EM2820_BOARD_MSI_VOX_USB_2] = { 1370 .name = "MSI VOX USB 2.0", 1371 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1372 .tda9887_conf = TDA9887_PRESENT | 1373 TDA9887_PORT1_ACTIVE | 1374 TDA9887_PORT2_ACTIVE, 1375 .max_range_640_480 = 1, 1376 .decoder = EM28XX_SAA711X, 1377 .input = { { 1378 .type = EM28XX_VMUX_TELEVISION, 1379 .vmux = SAA7115_COMPOSITE4, 1380 .amux = EM28XX_AMUX_VIDEO, 1381 }, { 1382 .type = EM28XX_VMUX_COMPOSITE1, 1383 .vmux = SAA7115_COMPOSITE0, 1384 .amux = EM28XX_AMUX_LINE_IN, 1385 }, { 1386 .type = EM28XX_VMUX_SVIDEO, 1387 .vmux = SAA7115_SVIDEO3, 1388 .amux = EM28XX_AMUX_LINE_IN, 1389 } }, 1390 }, 1391 [EM2800_BOARD_TERRATEC_CINERGY_200] = { 1392 .name = "Terratec Cinergy 200 USB", 1393 .is_em2800 = 1, 1394 .has_ir_i2c = 1, 1395 .tuner_type = TUNER_LG_TALN, 1396 .tda9887_conf = TDA9887_PRESENT, 1397 .decoder = EM28XX_SAA711X, 1398 .input = { { 1399 .type = EM28XX_VMUX_TELEVISION, 1400 .vmux = SAA7115_COMPOSITE2, 1401 .amux = EM28XX_AMUX_VIDEO, 1402 }, { 1403 .type = EM28XX_VMUX_COMPOSITE1, 1404 .vmux = SAA7115_COMPOSITE0, 1405 .amux = EM28XX_AMUX_LINE_IN, 1406 }, { 1407 .type = EM28XX_VMUX_SVIDEO, 1408 .vmux = SAA7115_SVIDEO3, 1409 .amux = EM28XX_AMUX_LINE_IN, 1410 } }, 1411 }, 1412 [EM2800_BOARD_GRABBEEX_USB2800] = { 1413 .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder", 1414 .is_em2800 = 1, 1415 .decoder = EM28XX_SAA711X, 1416 .tuner_type = TUNER_ABSENT, /* capture only board */ 1417 .input = { { 1418 .type = EM28XX_VMUX_COMPOSITE1, 1419 .vmux = SAA7115_COMPOSITE0, 1420 .amux = EM28XX_AMUX_LINE_IN, 1421 }, { 1422 .type = EM28XX_VMUX_SVIDEO, 1423 .vmux = SAA7115_SVIDEO3, 1424 .amux = EM28XX_AMUX_LINE_IN, 1425 } }, 1426 }, 1427 [EM2800_BOARD_VC211A] = { 1428 .name = "Actionmaster/LinXcel/Digitus VC211A", 1429 .is_em2800 = 1, 1430 .tuner_type = TUNER_ABSENT, /* Capture-only board */ 1431 .decoder = EM28XX_SAA711X, 1432 .input = { { 1433 .type = EM28XX_VMUX_COMPOSITE1, 1434 .vmux = SAA7115_COMPOSITE0, 1435 .amux = EM28XX_AMUX_LINE_IN, 1436 .gpio = vc211a_enable, 1437 }, { 1438 .type = EM28XX_VMUX_SVIDEO, 1439 .vmux = SAA7115_SVIDEO3, 1440 .amux = EM28XX_AMUX_LINE_IN, 1441 .gpio = vc211a_enable, 1442 } }, 1443 }, 1444 [EM2800_BOARD_LEADTEK_WINFAST_USBII] = { 1445 .name = "Leadtek Winfast USB II", 1446 .is_em2800 = 1, 1447 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1448 .tda9887_conf = TDA9887_PRESENT, 1449 .decoder = EM28XX_SAA711X, 1450 .input = { { 1451 .type = EM28XX_VMUX_TELEVISION, 1452 .vmux = SAA7115_COMPOSITE2, 1453 .amux = EM28XX_AMUX_VIDEO, 1454 }, { 1455 .type = EM28XX_VMUX_COMPOSITE1, 1456 .vmux = SAA7115_COMPOSITE0, 1457 .amux = EM28XX_AMUX_LINE_IN, 1458 }, { 1459 .type = EM28XX_VMUX_SVIDEO, 1460 .vmux = SAA7115_SVIDEO3, 1461 .amux = EM28XX_AMUX_LINE_IN, 1462 } }, 1463 }, 1464 [EM2800_BOARD_KWORLD_USB2800] = { 1465 .name = "Kworld USB2800", 1466 .is_em2800 = 1, 1467 .tuner_type = TUNER_PHILIPS_FCV1236D, 1468 .tda9887_conf = TDA9887_PRESENT, 1469 .decoder = EM28XX_SAA711X, 1470 .input = { { 1471 .type = EM28XX_VMUX_TELEVISION, 1472 .vmux = SAA7115_COMPOSITE2, 1473 .amux = EM28XX_AMUX_VIDEO, 1474 }, { 1475 .type = EM28XX_VMUX_COMPOSITE1, 1476 .vmux = SAA7115_COMPOSITE0, 1477 .amux = EM28XX_AMUX_LINE_IN, 1478 }, { 1479 .type = EM28XX_VMUX_SVIDEO, 1480 .vmux = SAA7115_SVIDEO3, 1481 .amux = EM28XX_AMUX_LINE_IN, 1482 } }, 1483 }, 1484 [EM2820_BOARD_PINNACLE_DVC_90] = { 1485 .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker " 1486 "/ Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U", 1487 .tuner_type = TUNER_ABSENT, /* capture only board */ 1488 .decoder = EM28XX_SAA711X, 1489 .input = { { 1490 .type = EM28XX_VMUX_COMPOSITE1, 1491 .vmux = SAA7115_COMPOSITE0, 1492 .amux = EM28XX_AMUX_LINE_IN, 1493 }, { 1494 .type = EM28XX_VMUX_SVIDEO, 1495 .vmux = SAA7115_SVIDEO3, 1496 .amux = EM28XX_AMUX_LINE_IN, 1497 } }, 1498 }, 1499 [EM2800_BOARD_VGEAR_POCKETTV] = { 1500 .name = "V-Gear PocketTV", 1501 .is_em2800 = 1, 1502 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1503 .tda9887_conf = TDA9887_PRESENT, 1504 .decoder = EM28XX_SAA711X, 1505 .input = { { 1506 .type = EM28XX_VMUX_TELEVISION, 1507 .vmux = SAA7115_COMPOSITE2, 1508 .amux = EM28XX_AMUX_VIDEO, 1509 }, { 1510 .type = EM28XX_VMUX_COMPOSITE1, 1511 .vmux = SAA7115_COMPOSITE0, 1512 .amux = EM28XX_AMUX_LINE_IN, 1513 }, { 1514 .type = EM28XX_VMUX_SVIDEO, 1515 .vmux = SAA7115_SVIDEO3, 1516 .amux = EM28XX_AMUX_LINE_IN, 1517 } }, 1518 }, 1519 [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = { 1520 .name = "Pixelview PlayTV Box 4 USB 2.0", 1521 .tda9887_conf = TDA9887_PRESENT, 1522 .tuner_type = TUNER_YMEC_TVF_5533MF, 1523 .decoder = EM28XX_SAA711X, 1524 .input = { { 1525 .type = EM28XX_VMUX_TELEVISION, 1526 .vmux = SAA7115_COMPOSITE2, 1527 .amux = EM28XX_AMUX_VIDEO, 1528 .aout = EM28XX_AOUT_MONO | /* I2S */ 1529 EM28XX_AOUT_MASTER, /* Line out pin */ 1530 }, { 1531 .type = EM28XX_VMUX_COMPOSITE1, 1532 .vmux = SAA7115_COMPOSITE0, 1533 .amux = EM28XX_AMUX_LINE_IN, 1534 }, { 1535 .type = EM28XX_VMUX_SVIDEO, 1536 .vmux = SAA7115_SVIDEO3, 1537 .amux = EM28XX_AMUX_LINE_IN, 1538 } }, 1539 }, 1540 [EM2820_BOARD_PROLINK_PLAYTV_USB2] = { 1541 .name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0", 1542 .buttons = std_snapshot_button, 1543 .tda9887_conf = TDA9887_PRESENT, 1544 .tuner_type = TUNER_YMEC_TVF_5533MF, 1545 .decoder = EM28XX_SAA711X, 1546 .input = { { 1547 .type = EM28XX_VMUX_TELEVISION, 1548 .vmux = SAA7115_COMPOSITE2, 1549 .amux = EM28XX_AMUX_VIDEO, 1550 .aout = EM28XX_AOUT_MONO | /* I2S */ 1551 EM28XX_AOUT_MASTER, /* Line out pin */ 1552 }, { 1553 .type = EM28XX_VMUX_COMPOSITE1, 1554 .vmux = SAA7115_COMPOSITE0, 1555 .amux = EM28XX_AMUX_LINE_IN, 1556 }, { 1557 .type = EM28XX_VMUX_SVIDEO, 1558 .vmux = SAA7115_SVIDEO3, 1559 .amux = EM28XX_AMUX_LINE_IN, 1560 } }, 1561 }, 1562 [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = { 1563 .name = "EM2860/SAA711X Reference Design", 1564 .buttons = std_snapshot_button, 1565 .tuner_type = TUNER_ABSENT, 1566 .decoder = EM28XX_SAA711X, 1567 .input = { { 1568 .type = EM28XX_VMUX_SVIDEO, 1569 .vmux = SAA7115_SVIDEO3, 1570 }, { 1571 .type = EM28XX_VMUX_COMPOSITE1, 1572 .vmux = SAA7115_COMPOSITE0, 1573 } }, 1574 }, 1575 1576 [EM2874_BOARD_LEADERSHIP_ISDBT] = { 1577 .def_i2c_bus = 1, 1578 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1579 EM28XX_I2C_FREQ_100_KHZ, 1580 .xclk = EM28XX_XCLK_FREQUENCY_10MHZ, 1581 .name = "EM2874 Leadership ISDBT", 1582 .tuner_type = TUNER_ABSENT, 1583 .tuner_gpio = leadership_reset, 1584 .dvb_gpio = leadership_digital, 1585 .has_dvb = 1, 1586 }, 1587 1588 [EM2880_BOARD_MSI_DIGIVOX_AD] = { 1589 .name = "MSI DigiVox A/D", 1590 .valid = EM28XX_BOARD_NOT_VALIDATED, 1591 .tuner_type = TUNER_XC2028, 1592 .tuner_gpio = default_tuner_gpio, 1593 .decoder = EM28XX_TVP5150, 1594 .input = { { 1595 .type = EM28XX_VMUX_TELEVISION, 1596 .vmux = TVP5150_COMPOSITE0, 1597 .amux = EM28XX_AMUX_VIDEO, 1598 .gpio = em2880_msi_digivox_ad_analog, 1599 }, { 1600 .type = EM28XX_VMUX_COMPOSITE1, 1601 .vmux = TVP5150_COMPOSITE1, 1602 .amux = EM28XX_AMUX_LINE_IN, 1603 .gpio = em2880_msi_digivox_ad_analog, 1604 }, { 1605 .type = EM28XX_VMUX_SVIDEO, 1606 .vmux = TVP5150_SVIDEO, 1607 .amux = EM28XX_AMUX_LINE_IN, 1608 .gpio = em2880_msi_digivox_ad_analog, 1609 } }, 1610 }, 1611 [EM2880_BOARD_MSI_DIGIVOX_AD_II] = { 1612 .name = "MSI DigiVox A/D II", 1613 .valid = EM28XX_BOARD_NOT_VALIDATED, 1614 .tuner_type = TUNER_XC2028, 1615 .tuner_gpio = default_tuner_gpio, 1616 .decoder = EM28XX_TVP5150, 1617 .input = { { 1618 .type = EM28XX_VMUX_TELEVISION, 1619 .vmux = TVP5150_COMPOSITE0, 1620 .amux = EM28XX_AMUX_VIDEO, 1621 .gpio = em2880_msi_digivox_ad_analog, 1622 }, { 1623 .type = EM28XX_VMUX_COMPOSITE1, 1624 .vmux = TVP5150_COMPOSITE1, 1625 .amux = EM28XX_AMUX_LINE_IN, 1626 .gpio = em2880_msi_digivox_ad_analog, 1627 }, { 1628 .type = EM28XX_VMUX_SVIDEO, 1629 .vmux = TVP5150_SVIDEO, 1630 .amux = EM28XX_AMUX_LINE_IN, 1631 .gpio = em2880_msi_digivox_ad_analog, 1632 } }, 1633 }, 1634 [EM2880_BOARD_KWORLD_DVB_305U] = { 1635 .name = "KWorld DVB-T 305U", 1636 .tuner_type = TUNER_XC2028, 1637 .tuner_gpio = default_tuner_gpio, 1638 .decoder = EM28XX_TVP5150, 1639 .input = { { 1640 .type = EM28XX_VMUX_TELEVISION, 1641 .vmux = TVP5150_COMPOSITE0, 1642 .amux = EM28XX_AMUX_VIDEO, 1643 }, { 1644 .type = EM28XX_VMUX_COMPOSITE1, 1645 .vmux = TVP5150_COMPOSITE1, 1646 .amux = EM28XX_AMUX_LINE_IN, 1647 }, { 1648 .type = EM28XX_VMUX_SVIDEO, 1649 .vmux = TVP5150_SVIDEO, 1650 .amux = EM28XX_AMUX_LINE_IN, 1651 } }, 1652 }, 1653 [EM2880_BOARD_KWORLD_DVB_310U] = { 1654 .name = "KWorld DVB-T 310U", 1655 .tuner_type = TUNER_XC2028, 1656 .tuner_gpio = default_tuner_gpio, 1657 .has_dvb = 1, 1658 .dvb_gpio = default_digital, 1659 .mts_firmware = 1, 1660 .decoder = EM28XX_TVP5150, 1661 .input = { { 1662 .type = EM28XX_VMUX_TELEVISION, 1663 .vmux = TVP5150_COMPOSITE0, 1664 .amux = EM28XX_AMUX_VIDEO, 1665 .gpio = default_analog, 1666 }, { 1667 .type = EM28XX_VMUX_COMPOSITE1, 1668 .vmux = TVP5150_COMPOSITE1, 1669 .amux = EM28XX_AMUX_LINE_IN, 1670 .gpio = default_analog, 1671 }, { /* S-video has not been tested yet */ 1672 .type = EM28XX_VMUX_SVIDEO, 1673 .vmux = TVP5150_SVIDEO, 1674 .amux = EM28XX_AMUX_LINE_IN, 1675 .gpio = default_analog, 1676 } }, 1677 }, 1678 [EM2882_BOARD_KWORLD_ATSC_315U] = { 1679 .name = "KWorld ATSC 315U HDTV TV Box", 1680 .valid = EM28XX_BOARD_NOT_VALIDATED, 1681 .tuner_type = TUNER_THOMSON_DTT761X, 1682 .tuner_gpio = em2882_kworld_315u_tuner_gpio, 1683 .tda9887_conf = TDA9887_PRESENT, 1684 .decoder = EM28XX_SAA711X, 1685 .has_dvb = 1, 1686 .dvb_gpio = em2882_kworld_315u_digital, 1687 .ir_codes = RC_MAP_KWORLD_315U, 1688 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1689 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 1690 /* Analog mode - still not ready */ 1691 /*.input = { { 1692 .type = EM28XX_VMUX_TELEVISION, 1693 .vmux = SAA7115_COMPOSITE2, 1694 .amux = EM28XX_AMUX_VIDEO, 1695 .gpio = em2882_kworld_315u_analog, 1696 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1697 }, { 1698 .type = EM28XX_VMUX_COMPOSITE1, 1699 .vmux = SAA7115_COMPOSITE0, 1700 .amux = EM28XX_AMUX_LINE_IN, 1701 .gpio = em2882_kworld_315u_analog1, 1702 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1703 }, { 1704 .type = EM28XX_VMUX_SVIDEO, 1705 .vmux = SAA7115_SVIDEO3, 1706 .amux = EM28XX_AMUX_LINE_IN, 1707 .gpio = em2882_kworld_315u_analog1, 1708 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1709 } }, */ 1710 }, 1711 [EM2880_BOARD_EMPIRE_DUAL_TV] = { 1712 .name = "Empire dual TV", 1713 .tuner_type = TUNER_XC2028, 1714 .tuner_gpio = default_tuner_gpio, 1715 .has_dvb = 1, 1716 .dvb_gpio = default_digital, 1717 .mts_firmware = 1, 1718 .decoder = EM28XX_TVP5150, 1719 .input = { { 1720 .type = EM28XX_VMUX_TELEVISION, 1721 .vmux = TVP5150_COMPOSITE0, 1722 .amux = EM28XX_AMUX_VIDEO, 1723 .gpio = default_analog, 1724 }, { 1725 .type = EM28XX_VMUX_COMPOSITE1, 1726 .vmux = TVP5150_COMPOSITE1, 1727 .amux = EM28XX_AMUX_LINE_IN, 1728 .gpio = default_analog, 1729 }, { 1730 .type = EM28XX_VMUX_SVIDEO, 1731 .vmux = TVP5150_SVIDEO, 1732 .amux = EM28XX_AMUX_LINE_IN, 1733 .gpio = default_analog, 1734 } }, 1735 }, 1736 [EM2881_BOARD_DNT_DA2_HYBRID] = { 1737 .name = "DNT DA2 Hybrid", 1738 .valid = EM28XX_BOARD_NOT_VALIDATED, 1739 .tuner_type = TUNER_XC2028, 1740 .tuner_gpio = default_tuner_gpio, 1741 .decoder = EM28XX_TVP5150, 1742 .input = { { 1743 .type = EM28XX_VMUX_TELEVISION, 1744 .vmux = TVP5150_COMPOSITE0, 1745 .amux = EM28XX_AMUX_VIDEO, 1746 .gpio = default_analog, 1747 }, { 1748 .type = EM28XX_VMUX_COMPOSITE1, 1749 .vmux = TVP5150_COMPOSITE1, 1750 .amux = EM28XX_AMUX_LINE_IN, 1751 .gpio = default_analog, 1752 }, { 1753 .type = EM28XX_VMUX_SVIDEO, 1754 .vmux = TVP5150_SVIDEO, 1755 .amux = EM28XX_AMUX_LINE_IN, 1756 .gpio = default_analog, 1757 } }, 1758 }, 1759 [EM2881_BOARD_PINNACLE_HYBRID_PRO] = { 1760 .name = "Pinnacle Hybrid Pro", 1761 .tuner_type = TUNER_XC2028, 1762 .tuner_gpio = default_tuner_gpio, 1763 .decoder = EM28XX_TVP5150, 1764 .has_dvb = 1, 1765 .dvb_gpio = pinnacle_hybrid_pro_digital, 1766 .input = { { 1767 .type = EM28XX_VMUX_TELEVISION, 1768 .vmux = TVP5150_COMPOSITE0, 1769 .amux = EM28XX_AMUX_VIDEO, 1770 .gpio = pinnacle_hybrid_pro_analog, 1771 }, { 1772 .type = EM28XX_VMUX_COMPOSITE1, 1773 .vmux = TVP5150_COMPOSITE1, 1774 .amux = EM28XX_AMUX_LINE_IN, 1775 .gpio = pinnacle_hybrid_pro_analog, 1776 }, { 1777 .type = EM28XX_VMUX_SVIDEO, 1778 .vmux = TVP5150_SVIDEO, 1779 .amux = EM28XX_AMUX_LINE_IN, 1780 .gpio = pinnacle_hybrid_pro_analog, 1781 } }, 1782 }, 1783 [EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = { 1784 .name = "Pinnacle Hybrid Pro (330e)", 1785 .tuner_type = TUNER_XC2028, 1786 .tuner_gpio = default_tuner_gpio, 1787 .mts_firmware = 1, 1788 .has_dvb = 1, 1789 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, 1790 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 1791 .decoder = EM28XX_TVP5150, 1792 .input = { { 1793 .type = EM28XX_VMUX_TELEVISION, 1794 .vmux = TVP5150_COMPOSITE0, 1795 .amux = EM28XX_AMUX_VIDEO, 1796 .gpio = hauppauge_wintv_hvr_900_analog, 1797 }, { 1798 .type = EM28XX_VMUX_COMPOSITE1, 1799 .vmux = TVP5150_COMPOSITE1, 1800 .amux = EM28XX_AMUX_LINE_IN, 1801 .gpio = hauppauge_wintv_hvr_900_analog, 1802 }, { 1803 .type = EM28XX_VMUX_SVIDEO, 1804 .vmux = TVP5150_SVIDEO, 1805 .amux = EM28XX_AMUX_LINE_IN, 1806 .gpio = hauppauge_wintv_hvr_900_analog, 1807 } }, 1808 }, 1809 [EM2882_BOARD_KWORLD_VS_DVBT] = { 1810 .name = "Kworld VS-DVB-T 323UR", 1811 .tuner_type = TUNER_XC2028, 1812 .tuner_gpio = default_tuner_gpio, 1813 .decoder = EM28XX_TVP5150, 1814 .mts_firmware = 1, 1815 .has_dvb = 1, 1816 .dvb_gpio = kworld_330u_digital, 1817 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 1818 .ir_codes = RC_MAP_KWORLD_315U, 1819 .input = { { 1820 .type = EM28XX_VMUX_TELEVISION, 1821 .vmux = TVP5150_COMPOSITE0, 1822 .amux = EM28XX_AMUX_VIDEO, 1823 }, { 1824 .type = EM28XX_VMUX_COMPOSITE1, 1825 .vmux = TVP5150_COMPOSITE1, 1826 .amux = EM28XX_AMUX_LINE_IN, 1827 }, { 1828 .type = EM28XX_VMUX_SVIDEO, 1829 .vmux = TVP5150_SVIDEO, 1830 .amux = EM28XX_AMUX_LINE_IN, 1831 } }, 1832 }, 1833 [EM2882_BOARD_TERRATEC_HYBRID_XS] = { 1834 .name = "Terratec Cinnergy Hybrid T USB XS (em2882)", 1835 .tuner_type = TUNER_XC2028, 1836 .tuner_gpio = default_tuner_gpio, 1837 .mts_firmware = 1, 1838 .decoder = EM28XX_TVP5150, 1839 .has_dvb = 1, 1840 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1841 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS, 1842 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1843 .input = { { 1844 .type = EM28XX_VMUX_TELEVISION, 1845 .vmux = TVP5150_COMPOSITE0, 1846 .amux = EM28XX_AMUX_VIDEO, 1847 .gpio = hauppauge_wintv_hvr_900_analog, 1848 }, { 1849 .type = EM28XX_VMUX_COMPOSITE1, 1850 .vmux = TVP5150_COMPOSITE1, 1851 .amux = EM28XX_AMUX_LINE_IN, 1852 .gpio = hauppauge_wintv_hvr_900_analog, 1853 }, { 1854 .type = EM28XX_VMUX_SVIDEO, 1855 .vmux = TVP5150_SVIDEO, 1856 .amux = EM28XX_AMUX_LINE_IN, 1857 .gpio = hauppauge_wintv_hvr_900_analog, 1858 } }, 1859 }, 1860 [EM2882_BOARD_DIKOM_DK300] = { 1861 .name = "Dikom DK300", 1862 .tuner_type = TUNER_XC2028, 1863 .tuner_gpio = default_tuner_gpio, 1864 .decoder = EM28XX_TVP5150, 1865 .mts_firmware = 1, 1866 .has_dvb = 1, 1867 .dvb_gpio = dikom_dk300_digital, 1868 .input = { { 1869 .type = EM28XX_VMUX_TELEVISION, 1870 .vmux = TVP5150_COMPOSITE0, 1871 .amux = EM28XX_AMUX_VIDEO, 1872 .gpio = default_analog, 1873 } }, 1874 }, 1875 [EM2883_BOARD_KWORLD_HYBRID_330U] = { 1876 .name = "Kworld PlusTV HD Hybrid 330", 1877 .tuner_type = TUNER_XC2028, 1878 .tuner_gpio = default_tuner_gpio, 1879 .decoder = EM28XX_TVP5150, 1880 .mts_firmware = 1, 1881 .has_dvb = 1, 1882 .dvb_gpio = kworld_330u_digital, 1883 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1884 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1885 EM28XX_I2C_EEPROM_ON_BOARD | 1886 EM28XX_I2C_EEPROM_KEY_VALID, 1887 .input = { { 1888 .type = EM28XX_VMUX_TELEVISION, 1889 .vmux = TVP5150_COMPOSITE0, 1890 .amux = EM28XX_AMUX_VIDEO, 1891 .gpio = kworld_330u_analog, 1892 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1893 }, { 1894 .type = EM28XX_VMUX_COMPOSITE1, 1895 .vmux = TVP5150_COMPOSITE1, 1896 .amux = EM28XX_AMUX_LINE_IN, 1897 .gpio = kworld_330u_analog, 1898 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1899 }, { 1900 .type = EM28XX_VMUX_SVIDEO, 1901 .vmux = TVP5150_SVIDEO, 1902 .amux = EM28XX_AMUX_LINE_IN, 1903 .gpio = kworld_330u_analog, 1904 } }, 1905 }, 1906 [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = { 1907 .name = "Compro VideoMate ForYou/Stereo", 1908 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1909 .tvaudio_addr = 0xb0, 1910 .tda9887_conf = TDA9887_PRESENT, 1911 .decoder = EM28XX_TVP5150, 1912 .adecoder = EM28XX_TVAUDIO, 1913 .mute_gpio = compro_mute_gpio, 1914 .input = { { 1915 .type = EM28XX_VMUX_TELEVISION, 1916 .vmux = TVP5150_COMPOSITE0, 1917 .amux = EM28XX_AMUX_VIDEO, 1918 .gpio = compro_unmute_tv_gpio, 1919 }, { 1920 .type = EM28XX_VMUX_SVIDEO, 1921 .vmux = TVP5150_SVIDEO, 1922 .amux = EM28XX_AMUX_LINE_IN, 1923 .gpio = compro_unmute_svid_gpio, 1924 } }, 1925 }, 1926 [EM2860_BOARD_KAIOMY_TVNPC_U2] = { 1927 .name = "Kaiomy TVnPC U2", 1928 .vchannels = 3, 1929 .tuner_type = TUNER_XC2028, 1930 .tuner_addr = 0x61, 1931 .mts_firmware = 1, 1932 .decoder = EM28XX_TVP5150, 1933 .tuner_gpio = default_tuner_gpio, 1934 .ir_codes = RC_MAP_KAIOMY, 1935 .input = { { 1936 .type = EM28XX_VMUX_TELEVISION, 1937 .vmux = TVP5150_COMPOSITE0, 1938 .amux = EM28XX_AMUX_VIDEO, 1939 1940 }, { 1941 .type = EM28XX_VMUX_COMPOSITE1, 1942 .vmux = TVP5150_COMPOSITE1, 1943 .amux = EM28XX_AMUX_LINE_IN, 1944 }, { 1945 .type = EM28XX_VMUX_SVIDEO, 1946 .vmux = TVP5150_SVIDEO, 1947 .amux = EM28XX_AMUX_LINE_IN, 1948 } }, 1949 .radio = { 1950 .type = EM28XX_RADIO, 1951 .amux = EM28XX_AMUX_LINE_IN, 1952 } 1953 }, 1954 [EM2860_BOARD_EASYCAP] = { 1955 .name = "Easy Cap Capture DC-60", 1956 .vchannels = 2, 1957 .tuner_type = TUNER_ABSENT, 1958 .decoder = EM28XX_SAA711X, 1959 .input = { { 1960 .type = EM28XX_VMUX_COMPOSITE1, 1961 .vmux = SAA7115_COMPOSITE0, 1962 .amux = EM28XX_AMUX_LINE_IN, 1963 }, { 1964 .type = EM28XX_VMUX_SVIDEO, 1965 .vmux = SAA7115_SVIDEO3, 1966 .amux = EM28XX_AMUX_LINE_IN, 1967 } }, 1968 }, 1969 [EM2820_BOARD_IODATA_GVMVP_SZ] = { 1970 .name = "IO-DATA GV-MVP/SZ", 1971 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 1972 .tuner_gpio = default_tuner_gpio, 1973 .tda9887_conf = TDA9887_PRESENT, 1974 .decoder = EM28XX_TVP5150, 1975 .input = { { 1976 .type = EM28XX_VMUX_TELEVISION, 1977 .vmux = TVP5150_COMPOSITE0, 1978 .amux = EM28XX_AMUX_VIDEO, 1979 }, { /* Composite has not been tested yet */ 1980 .type = EM28XX_VMUX_COMPOSITE1, 1981 .vmux = TVP5150_COMPOSITE1, 1982 .amux = EM28XX_AMUX_VIDEO, 1983 }, { /* S-video has not been tested yet */ 1984 .type = EM28XX_VMUX_SVIDEO, 1985 .vmux = TVP5150_SVIDEO, 1986 .amux = EM28XX_AMUX_VIDEO, 1987 } }, 1988 }, 1989 [EM2860_BOARD_TERRATEC_GRABBY] = { 1990 .name = "Terratec Grabby", 1991 .vchannels = 2, 1992 .tuner_type = TUNER_ABSENT, 1993 .decoder = EM28XX_SAA711X, 1994 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1995 .input = { { 1996 .type = EM28XX_VMUX_COMPOSITE1, 1997 .vmux = SAA7115_COMPOSITE0, 1998 .amux = EM28XX_AMUX_LINE_IN, 1999 }, { 2000 .type = EM28XX_VMUX_SVIDEO, 2001 .vmux = SAA7115_SVIDEO3, 2002 .amux = EM28XX_AMUX_LINE_IN, 2003 } }, 2004 }, 2005 [EM2860_BOARD_TERRATEC_AV350] = { 2006 .name = "Terratec AV350", 2007 .vchannels = 2, 2008 .tuner_type = TUNER_ABSENT, 2009 .decoder = EM28XX_TVP5150, 2010 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 2011 .mute_gpio = terratec_av350_mute_gpio, 2012 .input = { { 2013 .type = EM28XX_VMUX_COMPOSITE1, 2014 .vmux = TVP5150_COMPOSITE1, 2015 .amux = EM28XX_AUDIO_SRC_LINE, 2016 .gpio = terratec_av350_unmute_gpio, 2017 2018 }, { 2019 .type = EM28XX_VMUX_SVIDEO, 2020 .vmux = TVP5150_SVIDEO, 2021 .amux = EM28XX_AUDIO_SRC_LINE, 2022 .gpio = terratec_av350_unmute_gpio, 2023 } }, 2024 }, 2025 2026 [EM2860_BOARD_ELGATO_VIDEO_CAPTURE] = { 2027 .name = "Elgato Video Capture", 2028 .decoder = EM28XX_SAA711X, 2029 .tuner_type = TUNER_ABSENT, /* Capture only device */ 2030 .input = { { 2031 .type = EM28XX_VMUX_COMPOSITE1, 2032 .vmux = SAA7115_COMPOSITE0, 2033 .amux = EM28XX_AMUX_LINE_IN, 2034 }, { 2035 .type = EM28XX_VMUX_SVIDEO, 2036 .vmux = SAA7115_SVIDEO3, 2037 .amux = EM28XX_AMUX_LINE_IN, 2038 } }, 2039 }, 2040 2041 [EM2882_BOARD_EVGA_INDTUBE] = { 2042 .name = "Evga inDtube", 2043 .tuner_type = TUNER_XC2028, 2044 .tuner_gpio = default_tuner_gpio, 2045 .decoder = EM28XX_TVP5150, 2046 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 2047 .mts_firmware = 1, 2048 .has_dvb = 1, 2049 .dvb_gpio = evga_indtube_digital, 2050 .ir_codes = RC_MAP_EVGA_INDTUBE, 2051 .input = { { 2052 .type = EM28XX_VMUX_TELEVISION, 2053 .vmux = TVP5150_COMPOSITE0, 2054 .amux = EM28XX_AMUX_VIDEO, 2055 .gpio = evga_indtube_analog, 2056 }, { 2057 .type = EM28XX_VMUX_COMPOSITE1, 2058 .vmux = TVP5150_COMPOSITE1, 2059 .amux = EM28XX_AMUX_LINE_IN, 2060 .gpio = evga_indtube_analog, 2061 }, { 2062 .type = EM28XX_VMUX_SVIDEO, 2063 .vmux = TVP5150_SVIDEO, 2064 .amux = EM28XX_AMUX_LINE_IN, 2065 .gpio = evga_indtube_analog, 2066 } }, 2067 }, 2068 /* eb1a:2868 Empia EM2870 + Philips CU1216L NIM (Philips TDA10023 + 2069 Infineon TUA6034) */ 2070 [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = { 2071 .name = "Reddo DVB-C USB TV Box", 2072 .tuner_type = TUNER_ABSENT, 2073 .tuner_gpio = reddo_dvb_c_usb_box, 2074 .has_dvb = 1, 2075 }, 2076 /* 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold 2077 * initially as the KWorld PlusTV 340U, then as the UB435-Q. 2078 * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 */ 2079 [EM2870_BOARD_KWORLD_A340] = { 2080 .name = "KWorld PlusTV 340U or UB435-Q (ATSC)", 2081 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */ 2082 .has_dvb = 1, 2083 .dvb_gpio = kworld_a340_digital, 2084 .tuner_gpio = default_tuner_gpio, 2085 }, 2086 /* 2013:024f PCTV nanoStick T2 290e. 2087 * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 */ 2088 [EM28174_BOARD_PCTV_290E] = { 2089 .name = "PCTV nanoStick T2 290e", 2090 .def_i2c_bus = 1, 2091 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ, 2092 .tuner_type = TUNER_ABSENT, 2093 .tuner_gpio = pctv_290e, 2094 .has_dvb = 1, 2095 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2096 }, 2097 /* 2013:024f PCTV DVB-S2 Stick 460e 2098 * Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293 */ 2099 [EM28174_BOARD_PCTV_460E] = { 2100 .def_i2c_bus = 1, 2101 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, 2102 .name = "PCTV DVB-S2 Stick (460e)", 2103 .tuner_type = TUNER_ABSENT, 2104 .tuner_gpio = pctv_460e, 2105 .has_dvb = 1, 2106 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2107 }, 2108 /* eb1a:5006 Honestech VIDBOX NW03 2109 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner */ 2110 [EM2860_BOARD_HT_VIDBOX_NW03] = { 2111 .name = "Honestech Vidbox NW03", 2112 .tuner_type = TUNER_ABSENT, 2113 .decoder = EM28XX_SAA711X, 2114 .input = { { 2115 .type = EM28XX_VMUX_COMPOSITE1, 2116 .vmux = SAA7115_COMPOSITE0, 2117 .amux = EM28XX_AMUX_LINE_IN, 2118 }, { 2119 .type = EM28XX_VMUX_SVIDEO, 2120 .vmux = SAA7115_SVIDEO3, /* S-VIDEO needs confirming */ 2121 .amux = EM28XX_AMUX_LINE_IN, 2122 } }, 2123 }, 2124 /* 1b80:e425 MaxMedia UB425-TC 2125 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 */ 2126 [EM2874_BOARD_MAXMEDIA_UB425_TC] = { 2127 .name = "MaxMedia UB425-TC", 2128 .tuner_type = TUNER_ABSENT, 2129 .tuner_gpio = maxmedia_ub425_tc, 2130 .has_dvb = 1, 2131 .ir_codes = RC_MAP_REDDO, 2132 .def_i2c_bus = 1, 2133 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2134 EM28XX_I2C_FREQ_400_KHZ, 2135 }, 2136 /* 2304:0242 PCTV QuatroStick (510e) 2137 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */ 2138 [EM2884_BOARD_PCTV_510E] = { 2139 .name = "PCTV QuatroStick (510e)", 2140 .tuner_type = TUNER_ABSENT, 2141 .tuner_gpio = pctv_510e, 2142 .has_dvb = 1, 2143 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2144 .def_i2c_bus = 1, 2145 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2146 EM28XX_I2C_FREQ_400_KHZ, 2147 }, 2148 /* 2013:0251 PCTV QuatroStick nano (520e) 2149 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */ 2150 [EM2884_BOARD_PCTV_520E] = { 2151 .name = "PCTV QuatroStick nano (520e)", 2152 .tuner_type = TUNER_ABSENT, 2153 .tuner_gpio = pctv_520e, 2154 .has_dvb = 1, 2155 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2156 .def_i2c_bus = 1, 2157 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2158 EM28XX_I2C_FREQ_400_KHZ, 2159 }, 2160 [EM2884_BOARD_TERRATEC_HTC_USB_XS] = { 2161 .name = "Terratec Cinergy HTC USB XS", 2162 .has_dvb = 1, 2163 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, 2164 .tuner_type = TUNER_ABSENT, 2165 .def_i2c_bus = 1, 2166 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2167 EM28XX_I2C_FREQ_400_KHZ, 2168 }, 2169 /* 1b80:e1cc Delock 61959 2170 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 2171 * mostly the same as MaxMedia UB-425-TC but different remote */ 2172 [EM2874_BOARD_DELOCK_61959] = { 2173 .name = "Delock 61959", 2174 .tuner_type = TUNER_ABSENT, 2175 .tuner_gpio = maxmedia_ub425_tc, 2176 .has_dvb = 1, 2177 .ir_codes = RC_MAP_DELOCK_61959, 2178 .def_i2c_bus = 1, 2179 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2180 EM28XX_I2C_FREQ_400_KHZ, 2181 }, 2182 /* 2183 * 1b80:e346 KWorld USB ATSC TV Stick UB435-Q V2 2184 * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2 2185 */ 2186 [EM2874_BOARD_KWORLD_UB435Q_V2] = { 2187 .name = "KWorld USB ATSC TV Stick UB435-Q V2", 2188 .tuner_type = TUNER_ABSENT, 2189 .has_dvb = 1, 2190 .dvb_gpio = kworld_a340_digital, 2191 .tuner_gpio = default_tuner_gpio, 2192 .def_i2c_bus = 1, 2193 }, 2194 /* 2195 * 1b80:e34c KWorld USB ATSC TV Stick UB435-Q V3 2196 * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2 2197 */ 2198 [EM2874_BOARD_KWORLD_UB435Q_V3] = { 2199 .name = "KWorld USB ATSC TV Stick UB435-Q V3", 2200 .tuner_type = TUNER_ABSENT, 2201 .has_dvb = 1, 2202 .tuner_gpio = kworld_ub435q_v3_digital, 2203 .def_i2c_bus = 1, 2204 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2205 EM28XX_I2C_FREQ_100_KHZ, 2206 .leds = kworld_ub435q_v3_leds, 2207 }, 2208 [EM2874_BOARD_PCTV_HD_MINI_80E] = { 2209 .name = "Pinnacle PCTV HD Mini", 2210 .tuner_type = TUNER_ABSENT, 2211 .has_dvb = 1, 2212 .dvb_gpio = em2874_pctv_80e_digital, 2213 .decoder = EM28XX_NODECODER, 2214 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2215 .leds = pctv_80e_leds, 2216 }, 2217 /* 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam 2218 * Empia EM2765 + OmniVision OV2640 */ 2219 [EM2765_BOARD_SPEEDLINK_VAD_LAPLACE] = { 2220 .name = "SpeedLink Vicious And Devine Laplace webcam", 2221 .xclk = EM28XX_XCLK_FREQUENCY_24MHZ, 2222 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2223 EM28XX_I2C_FREQ_100_KHZ, 2224 .def_i2c_bus = 1, 2225 .tuner_type = TUNER_ABSENT, 2226 .is_webcam = 1, 2227 .input = { { 2228 .type = EM28XX_VMUX_COMPOSITE1, 2229 .amux = EM28XX_AMUX_VIDEO, 2230 .gpio = speedlink_vad_laplace_reg_seq, 2231 } }, 2232 .buttons = speedlink_vad_laplace_buttons, 2233 .leds = speedlink_vad_laplace_leds, 2234 }, 2235 /* 2013:0258 PCTV DVB-S2 Stick (461e) 2236 * Empia EM28178, Montage M88DS3103, Montage M88TS2022, Allegro A8293 */ 2237 [EM28178_BOARD_PCTV_461E] = { 2238 .def_i2c_bus = 1, 2239 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, 2240 .name = "PCTV DVB-S2 Stick (461e)", 2241 .tuner_type = TUNER_ABSENT, 2242 .tuner_gpio = pctv_461e, 2243 .has_dvb = 1, 2244 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2245 }, 2246 /* 2013:025f PCTV tripleStick (292e). 2247 * Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2157 */ 2248 [EM28178_BOARD_PCTV_292E] = { 2249 .name = "PCTV tripleStick (292e)", 2250 .def_i2c_bus = 1, 2251 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, 2252 .tuner_type = TUNER_ABSENT, 2253 .tuner_gpio = pctv_292e, 2254 .has_dvb = 1, 2255 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2256 }, 2257 [EM2861_BOARD_LEADTEK_VC100] = { 2258 .name = "Leadtek VC100", 2259 .tuner_type = TUNER_ABSENT, /* Capture only device */ 2260 .decoder = EM28XX_TVP5150, 2261 .input = { { 2262 .type = EM28XX_VMUX_COMPOSITE1, 2263 .vmux = TVP5150_COMPOSITE1, 2264 .amux = EM28XX_AMUX_LINE_IN, 2265 }, { 2266 .type = EM28XX_VMUX_SVIDEO, 2267 .vmux = TVP5150_SVIDEO, 2268 .amux = EM28XX_AMUX_LINE_IN, 2269 } }, 2270 }, 2271 /* eb1a:8179 Terratec Cinergy T2 Stick HD. 2272 * Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2146 */ 2273 [EM28178_BOARD_TERRATEC_T2_STICK_HD] = { 2274 .name = "Terratec Cinergy T2 Stick HD", 2275 .def_i2c_bus = 1, 2276 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, 2277 .tuner_type = TUNER_ABSENT, 2278 .tuner_gpio = terratec_t2_stick_hd, 2279 .has_dvb = 1, 2280 .ir_codes = RC_MAP_TERRATEC_SLIM_2, 2281 }, 2282 }; 2283 EXPORT_SYMBOL_GPL(em28xx_boards); 2284 2285 static const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); 2286 2287 /* table of devices that work with this driver */ 2288 struct usb_device_id em28xx_id_table[] = { 2289 { USB_DEVICE(0xeb1a, 0x2750), 2290 .driver_info = EM2750_BOARD_UNKNOWN }, 2291 { USB_DEVICE(0xeb1a, 0x2751), 2292 .driver_info = EM2750_BOARD_UNKNOWN }, 2293 { USB_DEVICE(0xeb1a, 0x2800), 2294 .driver_info = EM2800_BOARD_UNKNOWN }, 2295 { USB_DEVICE(0xeb1a, 0x2710), 2296 .driver_info = EM2820_BOARD_UNKNOWN }, 2297 { USB_DEVICE(0xeb1a, 0x2820), 2298 .driver_info = EM2820_BOARD_UNKNOWN }, 2299 { USB_DEVICE(0xeb1a, 0x2821), 2300 .driver_info = EM2820_BOARD_UNKNOWN }, 2301 { USB_DEVICE(0xeb1a, 0x2860), 2302 .driver_info = EM2820_BOARD_UNKNOWN }, 2303 { USB_DEVICE(0xeb1a, 0x2861), 2304 .driver_info = EM2820_BOARD_UNKNOWN }, 2305 { USB_DEVICE(0xeb1a, 0x2862), 2306 .driver_info = EM2820_BOARD_UNKNOWN }, 2307 { USB_DEVICE(0xeb1a, 0x2863), 2308 .driver_info = EM2820_BOARD_UNKNOWN }, 2309 { USB_DEVICE(0xeb1a, 0x2870), 2310 .driver_info = EM2820_BOARD_UNKNOWN }, 2311 { USB_DEVICE(0xeb1a, 0x2881), 2312 .driver_info = EM2820_BOARD_UNKNOWN }, 2313 { USB_DEVICE(0xeb1a, 0x2883), 2314 .driver_info = EM2820_BOARD_UNKNOWN }, 2315 { USB_DEVICE(0xeb1a, 0x2868), 2316 .driver_info = EM2820_BOARD_UNKNOWN }, 2317 { USB_DEVICE(0xeb1a, 0x2875), 2318 .driver_info = EM2820_BOARD_UNKNOWN }, 2319 { USB_DEVICE(0xeb1a, 0x2885), /* MSI Digivox Trio */ 2320 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2321 { USB_DEVICE(0xeb1a, 0xe300), 2322 .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U }, 2323 { USB_DEVICE(0xeb1a, 0xe303), 2324 .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 }, 2325 { USB_DEVICE(0xeb1a, 0xe305), 2326 .driver_info = EM2880_BOARD_KWORLD_DVB_305U }, 2327 { USB_DEVICE(0xeb1a, 0xe310), 2328 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD }, 2329 { USB_DEVICE(0xeb1a, 0xa313), 2330 .driver_info = EM2882_BOARD_KWORLD_ATSC_315U }, 2331 { USB_DEVICE(0xeb1a, 0xa316), 2332 .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U }, 2333 { USB_DEVICE(0xeb1a, 0xe320), 2334 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II }, 2335 { USB_DEVICE(0xeb1a, 0xe323), 2336 .driver_info = EM2882_BOARD_KWORLD_VS_DVBT }, 2337 { USB_DEVICE(0xeb1a, 0xe350), 2338 .driver_info = EM2870_BOARD_KWORLD_350U }, 2339 { USB_DEVICE(0xeb1a, 0xe355), 2340 .driver_info = EM2870_BOARD_KWORLD_355U }, 2341 { USB_DEVICE(0xeb1a, 0x2801), 2342 .driver_info = EM2800_BOARD_GRABBEEX_USB2800 }, 2343 { USB_DEVICE(0xeb1a, 0xe357), 2344 .driver_info = EM2870_BOARD_KWORLD_355U }, 2345 { USB_DEVICE(0xeb1a, 0xe359), 2346 .driver_info = EM2870_BOARD_KWORLD_355U }, 2347 { USB_DEVICE(0x1b80, 0xe302), 2348 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */ 2349 { USB_DEVICE(0x1b80, 0xe304), 2350 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kworld DVD Maker 2 */ 2351 { USB_DEVICE(0x0ccd, 0x0036), 2352 .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 }, 2353 { USB_DEVICE(0x0ccd, 0x004c), 2354 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR }, 2355 { USB_DEVICE(0x0ccd, 0x004f), 2356 .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS }, 2357 { USB_DEVICE(0x0ccd, 0x005e), 2358 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, 2359 { USB_DEVICE(0x0ccd, 0x0042), 2360 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, 2361 { USB_DEVICE(0x0ccd, 0x0043), 2362 .driver_info = EM2870_BOARD_TERRATEC_XS }, 2363 { USB_DEVICE(0x0ccd, 0x008e), /* Cinergy HTC USB XS Rev. 1 */ 2364 .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS }, 2365 { USB_DEVICE(0x0ccd, 0x00ac), /* Cinergy HTC USB XS Rev. 2 */ 2366 .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS }, 2367 { USB_DEVICE(0x0ccd, 0x10a2), /* H5 Rev. 1 */ 2368 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2369 { USB_DEVICE(0x0ccd, 0x10ad), /* H5 Rev. 2 */ 2370 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2371 { USB_DEVICE(0x0ccd, 0x10b6), /* H5 Rev. 3 */ 2372 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2373 { USB_DEVICE(0x0ccd, 0x0084), 2374 .driver_info = EM2860_BOARD_TERRATEC_AV350 }, 2375 { USB_DEVICE(0x0ccd, 0x0096), 2376 .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, 2377 { USB_DEVICE(0x0ccd, 0x10AF), 2378 .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, 2379 { USB_DEVICE(0x0ccd, 0x00b2), 2380 .driver_info = EM2884_BOARD_CINERGY_HTC_STICK }, 2381 { USB_DEVICE(0x0fd9, 0x0033), 2382 .driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE}, 2383 { USB_DEVICE(0x185b, 0x2870), 2384 .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE }, 2385 { USB_DEVICE(0x185b, 0x2041), 2386 .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU }, 2387 { USB_DEVICE(0x2040, 0x4200), 2388 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, 2389 { USB_DEVICE(0x2040, 0x4201), 2390 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, 2391 { USB_DEVICE(0x2040, 0x6500), 2392 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 }, 2393 { USB_DEVICE(0x2040, 0x6502), 2394 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 }, 2395 { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */ 2396 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2397 { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */ 2398 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2399 { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */ 2400 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2401 { USB_DEVICE(0x2040, 0x651f), 2402 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 }, 2403 { USB_DEVICE(0x0438, 0xb002), 2404 .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 }, 2405 { USB_DEVICE(0x2001, 0xf112), 2406 .driver_info = EM2820_BOARD_DLINK_USB_TV }, 2407 { USB_DEVICE(0x2304, 0x0207), 2408 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2409 { USB_DEVICE(0x2304, 0x0208), 2410 .driver_info = EM2820_BOARD_PINNACLE_USB_2 }, 2411 { USB_DEVICE(0x2304, 0x021a), 2412 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2413 { USB_DEVICE(0x2304, 0x0226), 2414 .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E }, 2415 { USB_DEVICE(0x2304, 0x0227), 2416 .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO }, 2417 { USB_DEVICE(0x2304, 0x023f), 2418 .driver_info = EM2874_BOARD_PCTV_HD_MINI_80E }, 2419 { USB_DEVICE(0x0413, 0x6023), 2420 .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII }, 2421 { USB_DEVICE(0x093b, 0xa003), 2422 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2423 { USB_DEVICE(0x093b, 0xa005), 2424 .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U }, 2425 { USB_DEVICE(0x04bb, 0x0515), 2426 .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ }, 2427 { USB_DEVICE(0xeb1a, 0x50a6), 2428 .driver_info = EM2860_BOARD_GADMEI_UTV330 }, 2429 { USB_DEVICE(0x1b80, 0xa340), 2430 .driver_info = EM2870_BOARD_KWORLD_A340 }, 2431 { USB_DEVICE(0x1b80, 0xe346), 2432 .driver_info = EM2874_BOARD_KWORLD_UB435Q_V2 }, 2433 { USB_DEVICE(0x1b80, 0xe34c), 2434 .driver_info = EM2874_BOARD_KWORLD_UB435Q_V3 }, 2435 { USB_DEVICE(0x2013, 0x024f), 2436 .driver_info = EM28174_BOARD_PCTV_290E }, 2437 { USB_DEVICE(0x2013, 0x024c), 2438 .driver_info = EM28174_BOARD_PCTV_460E }, 2439 { USB_DEVICE(0x2040, 0x1605), 2440 .driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C }, 2441 { USB_DEVICE(0x1b80, 0xe755), 2442 .driver_info = EM2884_BOARD_C3TECH_DIGITAL_DUO }, 2443 { USB_DEVICE(0xeb1a, 0x5006), 2444 .driver_info = EM2860_BOARD_HT_VIDBOX_NW03 }, 2445 { USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */ 2446 .driver_info = EM2860_BOARD_EASYCAP }, 2447 { USB_DEVICE(0x1b80, 0xe425), 2448 .driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC }, 2449 { USB_DEVICE(0x2304, 0x0242), 2450 .driver_info = EM2884_BOARD_PCTV_510E }, 2451 { USB_DEVICE(0x2013, 0x0251), 2452 .driver_info = EM2884_BOARD_PCTV_520E }, 2453 { USB_DEVICE(0x1b80, 0xe1cc), 2454 .driver_info = EM2874_BOARD_DELOCK_61959 }, 2455 { USB_DEVICE(0x1ae7, 0x9003), 2456 .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE }, 2457 { USB_DEVICE(0x1ae7, 0x9004), 2458 .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE }, 2459 { USB_DEVICE(0x2013, 0x0258), 2460 .driver_info = EM28178_BOARD_PCTV_461E }, 2461 { USB_DEVICE(0x2013, 0x025f), 2462 .driver_info = EM28178_BOARD_PCTV_292E }, 2463 { USB_DEVICE(0x0413, 0x6f07), 2464 .driver_info = EM2861_BOARD_LEADTEK_VC100 }, 2465 { USB_DEVICE(0xeb1a, 0x8179), 2466 .driver_info = EM28178_BOARD_TERRATEC_T2_STICK_HD }, 2467 { }, 2468 }; 2469 MODULE_DEVICE_TABLE(usb, em28xx_id_table); 2470 2471 /* 2472 * EEPROM hash table for devices with generic USB IDs 2473 */ 2474 static struct em28xx_hash_table em28xx_eeprom_hash[] = { 2475 /* P/N: SA 60002070465 Tuner: TVF7533-MF */ 2476 {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF}, 2477 {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF}, 2478 {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028}, 2479 {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028}, 2480 {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028}, 2481 {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028}, 2482 {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT}, 2483 {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028}, 2484 }; 2485 2486 /* I2C devicelist hash table for devices with generic USB IDs */ 2487 static struct em28xx_hash_table em28xx_i2c_hash[] = { 2488 {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC}, 2489 {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC}, 2490 {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT}, 2491 {0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT}, 2492 {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC}, 2493 {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF}, 2494 {0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT}, 2495 }; 2496 2497 /* NOTE: introduce a separate hash table for devices with 16 bit eeproms */ 2498 2499 int em28xx_tuner_callback(void *ptr, int component, int command, int arg) 2500 { 2501 struct em28xx_i2c_bus *i2c_bus = ptr; 2502 struct em28xx *dev = i2c_bus->dev; 2503 int rc = 0; 2504 2505 if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000) 2506 return 0; 2507 2508 if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET) 2509 return 0; 2510 2511 rc = em28xx_gpio_set(dev, dev->board.tuner_gpio); 2512 2513 return rc; 2514 } 2515 EXPORT_SYMBOL_GPL(em28xx_tuner_callback); 2516 2517 static inline void em28xx_set_model(struct em28xx *dev) 2518 { 2519 dev->board = em28xx_boards[dev->model]; 2520 2521 /* Those are the default values for the majority of boards 2522 Use those values if not specified otherwise at boards entry 2523 */ 2524 if (!dev->board.xclk) 2525 dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE | 2526 EM28XX_XCLK_FREQUENCY_12MHZ; 2527 2528 if (!dev->board.i2c_speed) 2529 dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2530 EM28XX_I2C_FREQ_100_KHZ; 2531 2532 /* Should be initialized early, for I2C to work */ 2533 dev->def_i2c_bus = dev->board.def_i2c_bus; 2534 } 2535 2536 /* Since em28xx_pre_card_setup() requires a proper dev->model, 2537 * this won't work for boards with generic PCI IDs 2538 */ 2539 static void em28xx_pre_card_setup(struct em28xx *dev) 2540 { 2541 /* Set the initial XCLK and I2C clock values based on the board 2542 definition */ 2543 em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f); 2544 if (!dev->board.is_em2800) 2545 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed); 2546 msleep(50); 2547 2548 /* request some modules */ 2549 switch (dev->model) { 2550 case EM2861_BOARD_PLEXTOR_PX_TV100U: 2551 /* Sets the msp34xx I2S speed */ 2552 dev->i2s_speed = 2048000; 2553 break; 2554 case EM2861_BOARD_KWORLD_PVRTV_300U: 2555 case EM2880_BOARD_KWORLD_DVB_305U: 2556 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x6d); 2557 msleep(10); 2558 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x7d); 2559 msleep(10); 2560 break; 2561 case EM2870_BOARD_COMPRO_VIDEOMATE: 2562 /* TODO: someone can do some cleanup here... 2563 not everything's needed */ 2564 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); 2565 msleep(10); 2566 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01); 2567 msleep(10); 2568 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 2569 mdelay(70); 2570 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc); 2571 mdelay(70); 2572 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xdc); 2573 mdelay(70); 2574 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc); 2575 mdelay(70); 2576 break; 2577 case EM2870_BOARD_TERRATEC_XS_MT2060: 2578 /* this device needs some gpio writes to get the DVB-T 2579 demod work */ 2580 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2581 mdelay(70); 2582 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde); 2583 mdelay(70); 2584 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2585 mdelay(70); 2586 break; 2587 case EM2870_BOARD_PINNACLE_PCTV_DVB: 2588 /* this device needs some gpio writes to get the 2589 DVB-T demod work */ 2590 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2591 mdelay(70); 2592 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde); 2593 mdelay(70); 2594 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2595 mdelay(70); 2596 break; 2597 case EM2820_BOARD_GADMEI_UTV310: 2598 case EM2820_BOARD_MSI_VOX_USB_2: 2599 /* enables audio for that devices */ 2600 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 2601 break; 2602 2603 case EM2882_BOARD_KWORLD_ATSC_315U: 2604 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); 2605 msleep(10); 2606 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2607 msleep(10); 2608 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); 2609 msleep(10); 2610 em28xx_write_reg(dev, EM2880_R04_GPO, 0x08); 2611 msleep(10); 2612 break; 2613 2614 case EM2860_BOARD_KAIOMY_TVNPC_U2: 2615 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1); 2616 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1); 2617 em28xx_write_regs(dev, 0x0d, "\x42", 1); 2618 em28xx_write_regs(dev, 0x08, "\xfd", 1); 2619 msleep(10); 2620 em28xx_write_regs(dev, 0x08, "\xff", 1); 2621 msleep(10); 2622 em28xx_write_regs(dev, 0x08, "\x7f", 1); 2623 msleep(10); 2624 em28xx_write_regs(dev, 0x08, "\x6b", 1); 2625 2626 break; 2627 case EM2860_BOARD_EASYCAP: 2628 em28xx_write_regs(dev, 0x08, "\xf8", 1); 2629 break; 2630 2631 case EM2820_BOARD_IODATA_GVMVP_SZ: 2632 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); 2633 msleep(70); 2634 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7); 2635 msleep(10); 2636 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2637 msleep(70); 2638 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 2639 msleep(70); 2640 break; 2641 } 2642 2643 em28xx_gpio_set(dev, dev->board.tuner_gpio); 2644 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 2645 2646 /* Unlock device */ 2647 em28xx_set_mode(dev, EM28XX_SUSPEND); 2648 } 2649 2650 static int em28xx_hint_board(struct em28xx *dev) 2651 { 2652 int i; 2653 2654 if (dev->board.is_webcam) { 2655 if (dev->em28xx_sensor == EM28XX_MT9V011) { 2656 dev->model = EM2820_BOARD_SILVERCREST_WEBCAM; 2657 } else if (dev->em28xx_sensor == EM28XX_MT9M001 || 2658 dev->em28xx_sensor == EM28XX_MT9M111) { 2659 dev->model = EM2750_BOARD_UNKNOWN; 2660 } 2661 /* FIXME: IMPROVE ! */ 2662 2663 return 0; 2664 } 2665 2666 /* HINT method: EEPROM 2667 * 2668 * This method works only for boards with eeprom. 2669 * Uses a hash of all eeprom bytes. The hash should be 2670 * unique for a vendor/tuner pair. 2671 * There are a high chance that tuners for different 2672 * video standards produce different hashes. 2673 */ 2674 for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) { 2675 if (dev->hash == em28xx_eeprom_hash[i].hash) { 2676 dev->model = em28xx_eeprom_hash[i].model; 2677 dev->tuner_type = em28xx_eeprom_hash[i].tuner; 2678 2679 em28xx_errdev("Your board has no unique USB ID.\n"); 2680 em28xx_errdev("A hint were successfully done, " 2681 "based on eeprom hash.\n"); 2682 em28xx_errdev("This method is not 100%% failproof.\n"); 2683 em28xx_errdev("If the board were missdetected, " 2684 "please email this log to:\n"); 2685 em28xx_errdev("\tV4L Mailing List " 2686 " <linux-media@vger.kernel.org>\n"); 2687 em28xx_errdev("Board detected as %s\n", 2688 em28xx_boards[dev->model].name); 2689 2690 return 0; 2691 } 2692 } 2693 2694 /* HINT method: I2C attached devices 2695 * 2696 * This method works for all boards. 2697 * Uses a hash of i2c scanned devices. 2698 * Devices with the same i2c attached chips will 2699 * be considered equal. 2700 * This method is less precise than the eeprom one. 2701 */ 2702 2703 /* user did not request i2c scanning => do it now */ 2704 if (!dev->i2c_hash) 2705 em28xx_do_i2c_scan(dev, dev->def_i2c_bus); 2706 2707 for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) { 2708 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) { 2709 dev->model = em28xx_i2c_hash[i].model; 2710 dev->tuner_type = em28xx_i2c_hash[i].tuner; 2711 em28xx_errdev("Your board has no unique USB ID.\n"); 2712 em28xx_errdev("A hint were successfully done, " 2713 "based on i2c devicelist hash.\n"); 2714 em28xx_errdev("This method is not 100%% failproof.\n"); 2715 em28xx_errdev("If the board were missdetected, " 2716 "please email this log to:\n"); 2717 em28xx_errdev("\tV4L Mailing List " 2718 " <linux-media@vger.kernel.org>\n"); 2719 em28xx_errdev("Board detected as %s\n", 2720 em28xx_boards[dev->model].name); 2721 2722 return 0; 2723 } 2724 } 2725 2726 em28xx_errdev("Your board has no unique USB ID and thus need a " 2727 "hint to be detected.\n"); 2728 em28xx_errdev("You may try to use card=<n> insmod option to " 2729 "workaround that.\n"); 2730 em28xx_errdev("Please send an email with this log to:\n"); 2731 em28xx_errdev("\tV4L Mailing List <linux-media@vger.kernel.org>\n"); 2732 em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash); 2733 em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash); 2734 2735 em28xx_errdev("Here is a list of valid choices for the card=<n>" 2736 " insmod option:\n"); 2737 for (i = 0; i < em28xx_bcount; i++) { 2738 em28xx_errdev(" card=%d -> %s\n", 2739 i, em28xx_boards[i].name); 2740 } 2741 return -1; 2742 } 2743 2744 static void em28xx_card_setup(struct em28xx *dev) 2745 { 2746 /* 2747 * If the device can be a webcam, seek for a sensor. 2748 * If sensor is not found, then it isn't a webcam. 2749 */ 2750 if (dev->board.is_webcam) { 2751 if (em28xx_detect_sensor(dev) < 0) 2752 dev->board.is_webcam = 0; 2753 } 2754 2755 switch (dev->model) { 2756 case EM2750_BOARD_UNKNOWN: 2757 case EM2820_BOARD_UNKNOWN: 2758 case EM2800_BOARD_UNKNOWN: 2759 /* 2760 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD. 2761 * 2762 * This occurs because they share identical USB vendor and 2763 * product IDs. 2764 * 2765 * What we do here is look up the EEPROM hash of the K-WORLD 2766 * and if it is found then we decide that we do not have 2767 * a DIGIVOX and reset the device to the K-WORLD instead. 2768 * 2769 * This solution is only valid if they do not share eeprom 2770 * hash identities which has not been determined as yet. 2771 */ 2772 if (em28xx_hint_board(dev) < 0) 2773 em28xx_errdev("Board not discovered\n"); 2774 else { 2775 em28xx_set_model(dev); 2776 em28xx_pre_card_setup(dev); 2777 } 2778 break; 2779 default: 2780 em28xx_set_model(dev); 2781 } 2782 2783 em28xx_info("Identified as %s (card=%d)\n", 2784 dev->board.name, dev->model); 2785 2786 dev->tuner_type = em28xx_boards[dev->model].tuner_type; 2787 2788 /* request some modules */ 2789 switch (dev->model) { 2790 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2: 2791 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: 2792 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: 2793 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: 2794 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: 2795 case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C: 2796 { 2797 struct tveeprom tv; 2798 2799 if (dev->eedata == NULL) 2800 break; 2801 #if defined(CONFIG_MODULES) && defined(MODULE) 2802 request_module("tveeprom"); 2803 #endif 2804 /* Call first TVeeprom */ 2805 2806 dev->i2c_client[dev->def_i2c_bus].addr = 0xa0 >> 1; 2807 tveeprom_hauppauge_analog(&dev->i2c_client[dev->def_i2c_bus], &tv, dev->eedata); 2808 2809 dev->tuner_type = tv.tuner_type; 2810 2811 if (tv.audio_processor == TVEEPROM_AUDPROC_MSP) { 2812 dev->i2s_speed = 2048000; 2813 dev->board.has_msp34xx = 1; 2814 } 2815 break; 2816 } 2817 case EM2882_BOARD_KWORLD_ATSC_315U: 2818 em28xx_write_reg(dev, 0x0d, 0x42); 2819 msleep(10); 2820 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 2821 msleep(10); 2822 break; 2823 case EM2820_BOARD_KWORLD_PVRTV2800RF: 2824 /* GPIO enables sound on KWORLD PVR TV 2800RF */ 2825 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf9); 2826 break; 2827 case EM2820_BOARD_UNKNOWN: 2828 case EM2800_BOARD_UNKNOWN: 2829 /* 2830 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD. 2831 * 2832 * This occurs because they share identical USB vendor and 2833 * product IDs. 2834 * 2835 * What we do here is look up the EEPROM hash of the K-WORLD 2836 * and if it is found then we decide that we do not have 2837 * a DIGIVOX and reset the device to the K-WORLD instead. 2838 * 2839 * This solution is only valid if they do not share eeprom 2840 * hash identities which has not been determined as yet. 2841 */ 2842 case EM2880_BOARD_MSI_DIGIVOX_AD: 2843 if (!em28xx_hint_board(dev)) 2844 em28xx_set_model(dev); 2845 2846 /* In cases where we had to use a board hint, the call to 2847 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, 2848 so make the call now so the analog GPIOs are set properly 2849 before probing the i2c bus. */ 2850 em28xx_gpio_set(dev, dev->board.tuner_gpio); 2851 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 2852 break; 2853 2854 /* 2855 * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR. 2856 * 2857 * This occurs because they share identical USB vendor and 2858 * product IDs. 2859 * 2860 * What we do here is look up the EEPROM hash of the Dikom 2861 * and if it is found then we decide that we do not have 2862 * a Kworld and reset the device to the Dikom instead. 2863 * 2864 * This solution is only valid if they do not share eeprom 2865 * hash identities which has not been determined as yet. 2866 */ 2867 case EM2882_BOARD_KWORLD_VS_DVBT: 2868 if (!em28xx_hint_board(dev)) 2869 em28xx_set_model(dev); 2870 2871 /* In cases where we had to use a board hint, the call to 2872 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, 2873 so make the call now so the analog GPIOs are set properly 2874 before probing the i2c bus. */ 2875 em28xx_gpio_set(dev, dev->board.tuner_gpio); 2876 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 2877 break; 2878 } 2879 2880 if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) { 2881 em28xx_errdev("\n\n"); 2882 em28xx_errdev("The support for this board weren't " 2883 "valid yet.\n"); 2884 em28xx_errdev("Please send a report of having this working\n"); 2885 em28xx_errdev("not to V4L mailing list (and/or to other " 2886 "addresses)\n\n"); 2887 } 2888 2889 /* Free eeprom data memory */ 2890 kfree(dev->eedata); 2891 dev->eedata = NULL; 2892 2893 /* Allow override tuner type by a module parameter */ 2894 if (tuner >= 0) 2895 dev->tuner_type = tuner; 2896 } 2897 2898 void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) 2899 { 2900 memset(ctl, 0, sizeof(*ctl)); 2901 2902 ctl->fname = XC2028_DEFAULT_FIRMWARE; 2903 ctl->max_len = 64; 2904 ctl->mts = em28xx_boards[dev->model].mts_firmware; 2905 2906 switch (dev->model) { 2907 case EM2880_BOARD_EMPIRE_DUAL_TV: 2908 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: 2909 case EM2882_BOARD_TERRATEC_HYBRID_XS: 2910 ctl->demod = XC3028_FE_ZARLINK456; 2911 break; 2912 case EM2880_BOARD_TERRATEC_HYBRID_XS: 2913 case EM2880_BOARD_TERRATEC_HYBRID_XS_FR: 2914 case EM2881_BOARD_PINNACLE_HYBRID_PRO: 2915 ctl->demod = XC3028_FE_ZARLINK456; 2916 break; 2917 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: 2918 case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E: 2919 ctl->demod = XC3028_FE_DEFAULT; 2920 break; 2921 case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600: 2922 ctl->demod = XC3028_FE_DEFAULT; 2923 ctl->fname = XC3028L_DEFAULT_FIRMWARE; 2924 break; 2925 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: 2926 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: 2927 case EM2880_BOARD_PINNACLE_PCTV_HD_PRO: 2928 /* FIXME: Better to specify the needed IF */ 2929 ctl->demod = XC3028_FE_DEFAULT; 2930 break; 2931 case EM2883_BOARD_KWORLD_HYBRID_330U: 2932 case EM2882_BOARD_DIKOM_DK300: 2933 case EM2882_BOARD_KWORLD_VS_DVBT: 2934 ctl->demod = XC3028_FE_CHINA; 2935 ctl->fname = XC2028_DEFAULT_FIRMWARE; 2936 break; 2937 case EM2882_BOARD_EVGA_INDTUBE: 2938 ctl->demod = XC3028_FE_CHINA; 2939 ctl->fname = XC3028L_DEFAULT_FIRMWARE; 2940 break; 2941 default: 2942 ctl->demod = XC3028_FE_OREN538; 2943 } 2944 } 2945 EXPORT_SYMBOL_GPL(em28xx_setup_xc3028); 2946 2947 static void request_module_async(struct work_struct *work) 2948 { 2949 struct em28xx *dev = container_of(work, 2950 struct em28xx, request_module_wk); 2951 2952 /* 2953 * The em28xx extensions can be modules or builtin. If the 2954 * modules are already loaded or are built in, those extensions 2955 * can be initialised right now. Otherwise, the module init 2956 * code will do it. 2957 */ 2958 2959 /* 2960 * Devicdes with an audio-only interface also have a V4L/DVB/RC 2961 * interface. Don't register extensions twice on those devices. 2962 */ 2963 if (dev->is_audio_only) { 2964 #if defined(CONFIG_MODULES) && defined(MODULE) 2965 request_module("em28xx-alsa"); 2966 #endif 2967 return; 2968 } 2969 2970 em28xx_init_extension(dev); 2971 2972 #if defined(CONFIG_MODULES) && defined(MODULE) 2973 if (dev->has_video) 2974 request_module("em28xx-v4l"); 2975 if (dev->usb_audio_type == EM28XX_USB_AUDIO_CLASS) 2976 request_module("snd-usb-audio"); 2977 else if (dev->usb_audio_type == EM28XX_USB_AUDIO_VENDOR) 2978 request_module("em28xx-alsa"); 2979 if (dev->board.has_dvb) 2980 request_module("em28xx-dvb"); 2981 if (dev->board.buttons || 2982 ((dev->board.ir_codes || dev->board.has_ir_i2c) && !disable_ir)) 2983 request_module("em28xx-rc"); 2984 #endif /* CONFIG_MODULES */ 2985 } 2986 2987 static void request_modules(struct em28xx *dev) 2988 { 2989 INIT_WORK(&dev->request_module_wk, request_module_async); 2990 schedule_work(&dev->request_module_wk); 2991 } 2992 2993 static void flush_request_modules(struct em28xx *dev) 2994 { 2995 flush_work(&dev->request_module_wk); 2996 } 2997 2998 /* 2999 * em28xx_release_resources() 3000 * unregisters the v4l2,i2c and usb devices 3001 * called when the device gets disconnected or at module unload 3002 */ 3003 static void em28xx_release_resources(struct em28xx *dev) 3004 { 3005 /*FIXME: I2C IR should be disconnected */ 3006 3007 mutex_lock(&dev->lock); 3008 3009 if (dev->def_i2c_bus) 3010 em28xx_i2c_unregister(dev, 1); 3011 em28xx_i2c_unregister(dev, 0); 3012 3013 usb_put_dev(dev->udev); 3014 3015 /* Mark device as unused */ 3016 clear_bit(dev->devno, em28xx_devused); 3017 3018 mutex_unlock(&dev->lock); 3019 }; 3020 3021 /** 3022 * em28xx_free_device() - Free em28xx device 3023 * 3024 * @ref: struct kref for em28xx device 3025 * 3026 * This is called when all extensions and em28xx core unregisters a device 3027 */ 3028 void em28xx_free_device(struct kref *ref) 3029 { 3030 struct em28xx *dev = kref_to_dev(ref); 3031 3032 em28xx_info("Freeing device\n"); 3033 3034 if (!dev->disconnected) 3035 em28xx_release_resources(dev); 3036 3037 kfree(dev->alt_max_pkt_size_isoc); 3038 kfree(dev); 3039 } 3040 EXPORT_SYMBOL_GPL(em28xx_free_device); 3041 3042 /* 3043 * em28xx_init_dev() 3044 * allocates and inits the device structs, registers i2c bus and v4l device 3045 */ 3046 static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, 3047 struct usb_interface *interface, 3048 int minor) 3049 { 3050 int retval; 3051 static const char *default_chip_name = "em28xx"; 3052 const char *chip_name = default_chip_name; 3053 3054 dev->udev = udev; 3055 mutex_init(&dev->ctrl_urb_lock); 3056 spin_lock_init(&dev->slock); 3057 3058 dev->em28xx_write_regs = em28xx_write_regs; 3059 dev->em28xx_read_reg = em28xx_read_reg; 3060 dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len; 3061 dev->em28xx_write_regs_req = em28xx_write_regs_req; 3062 dev->em28xx_read_reg_req = em28xx_read_reg_req; 3063 dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800; 3064 3065 em28xx_set_model(dev); 3066 3067 dev->wait_after_write = 5; 3068 3069 /* Based on the Chip ID, set the device configuration */ 3070 retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID); 3071 if (retval > 0) { 3072 dev->chip_id = retval; 3073 3074 switch (dev->chip_id) { 3075 case CHIP_ID_EM2800: 3076 chip_name = "em2800"; 3077 break; 3078 case CHIP_ID_EM2710: 3079 chip_name = "em2710"; 3080 break; 3081 case CHIP_ID_EM2750: 3082 chip_name = "em2750"; 3083 break; 3084 case CHIP_ID_EM2765: 3085 chip_name = "em2765"; 3086 dev->wait_after_write = 0; 3087 dev->is_em25xx = 1; 3088 dev->eeprom_addrwidth_16bit = 1; 3089 break; 3090 case CHIP_ID_EM2820: 3091 chip_name = "em2710/2820"; 3092 if (le16_to_cpu(dev->udev->descriptor.idVendor) 3093 == 0xeb1a) { 3094 __le16 idProd = dev->udev->descriptor.idProduct; 3095 3096 if (le16_to_cpu(idProd) == 0x2710) 3097 chip_name = "em2710"; 3098 else if (le16_to_cpu(idProd) == 0x2820) 3099 chip_name = "em2820"; 3100 } 3101 /* NOTE: the em2820 is used in webcams, too ! */ 3102 break; 3103 case CHIP_ID_EM2840: 3104 chip_name = "em2840"; 3105 break; 3106 case CHIP_ID_EM2860: 3107 chip_name = "em2860"; 3108 break; 3109 case CHIP_ID_EM2870: 3110 chip_name = "em2870"; 3111 dev->wait_after_write = 0; 3112 break; 3113 case CHIP_ID_EM2874: 3114 chip_name = "em2874"; 3115 dev->wait_after_write = 0; 3116 dev->eeprom_addrwidth_16bit = 1; 3117 break; 3118 case CHIP_ID_EM28174: 3119 chip_name = "em28174"; 3120 dev->wait_after_write = 0; 3121 dev->eeprom_addrwidth_16bit = 1; 3122 break; 3123 case CHIP_ID_EM28178: 3124 chip_name = "em28178"; 3125 dev->wait_after_write = 0; 3126 dev->eeprom_addrwidth_16bit = 1; 3127 break; 3128 case CHIP_ID_EM2883: 3129 chip_name = "em2882/3"; 3130 dev->wait_after_write = 0; 3131 break; 3132 case CHIP_ID_EM2884: 3133 chip_name = "em2884"; 3134 dev->wait_after_write = 0; 3135 dev->eeprom_addrwidth_16bit = 1; 3136 break; 3137 default: 3138 printk(KERN_INFO DRIVER_NAME 3139 ": unknown em28xx chip ID (%d)\n", dev->chip_id); 3140 } 3141 } 3142 3143 if (chip_name != default_chip_name) 3144 printk(KERN_INFO DRIVER_NAME 3145 ": chip ID is %s\n", chip_name); 3146 3147 /* 3148 * For em2820/em2710, the name may change latter, after checking 3149 * if the device has a sensor (so, it is em2710) or not. 3150 */ 3151 snprintf(dev->name, sizeof(dev->name), "%s #%d", chip_name, dev->devno); 3152 3153 if (dev->is_audio_only) { 3154 retval = em28xx_audio_setup(dev); 3155 if (retval) 3156 return -ENODEV; 3157 em28xx_init_extension(dev); 3158 3159 return 0; 3160 } 3161 3162 em28xx_pre_card_setup(dev); 3163 3164 if (!dev->board.is_em2800) { 3165 /* Resets I2C speed */ 3166 retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed); 3167 if (retval < 0) { 3168 em28xx_errdev("%s: em28xx_write_reg failed!" 3169 " retval [%d]\n", 3170 __func__, retval); 3171 return retval; 3172 } 3173 } 3174 3175 rt_mutex_init(&dev->i2c_bus_lock); 3176 3177 /* register i2c bus 0 */ 3178 if (dev->board.is_em2800) 3179 retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM2800); 3180 else 3181 retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM28XX); 3182 if (retval < 0) { 3183 em28xx_errdev("%s: em28xx_i2c_register bus 0 - error [%d]!\n", 3184 __func__, retval); 3185 return retval; 3186 } 3187 3188 /* register i2c bus 1 */ 3189 if (dev->def_i2c_bus) { 3190 if (dev->is_em25xx) 3191 retval = em28xx_i2c_register(dev, 1, 3192 EM28XX_I2C_ALGO_EM25XX_BUS_B); 3193 else 3194 retval = em28xx_i2c_register(dev, 1, 3195 EM28XX_I2C_ALGO_EM28XX); 3196 if (retval < 0) { 3197 em28xx_errdev("%s: em28xx_i2c_register bus 1 - error [%d]!\n", 3198 __func__, retval); 3199 3200 em28xx_i2c_unregister(dev, 0); 3201 3202 return retval; 3203 } 3204 } 3205 3206 /* Do board specific init and eeprom reading */ 3207 em28xx_card_setup(dev); 3208 3209 return 0; 3210 } 3211 3212 /* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */ 3213 #define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) 3214 3215 /* 3216 * em28xx_usb_probe() 3217 * checks for supported devices 3218 */ 3219 static int em28xx_usb_probe(struct usb_interface *interface, 3220 const struct usb_device_id *id) 3221 { 3222 struct usb_device *udev; 3223 struct em28xx *dev = NULL; 3224 int retval; 3225 bool has_vendor_audio = false, has_video = false, has_dvb = false; 3226 int i, nr, try_bulk; 3227 const int ifnum = interface->altsetting[0].desc.bInterfaceNumber; 3228 char *speed; 3229 3230 udev = usb_get_dev(interface_to_usbdev(interface)); 3231 3232 /* Check to see next free device and mark as used */ 3233 do { 3234 nr = find_first_zero_bit(em28xx_devused, EM28XX_MAXBOARDS); 3235 if (nr >= EM28XX_MAXBOARDS) { 3236 /* No free device slots */ 3237 printk(DRIVER_NAME ": Supports only %i em28xx boards.\n", 3238 EM28XX_MAXBOARDS); 3239 retval = -ENOMEM; 3240 goto err_no_slot; 3241 } 3242 } while (test_and_set_bit(nr, em28xx_devused)); 3243 3244 /* Don't register audio interfaces */ 3245 if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { 3246 em28xx_err(DRIVER_NAME " audio device (%04x:%04x): " 3247 "interface %i, class %i\n", 3248 le16_to_cpu(udev->descriptor.idVendor), 3249 le16_to_cpu(udev->descriptor.idProduct), 3250 ifnum, 3251 interface->altsetting[0].desc.bInterfaceClass); 3252 3253 retval = -ENODEV; 3254 goto err; 3255 } 3256 3257 /* allocate memory for our device state and initialize it */ 3258 dev = kzalloc(sizeof(*dev), GFP_KERNEL); 3259 if (dev == NULL) { 3260 em28xx_err(DRIVER_NAME ": out of memory!\n"); 3261 retval = -ENOMEM; 3262 goto err; 3263 } 3264 3265 /* compute alternate max packet sizes */ 3266 dev->alt_max_pkt_size_isoc = 3267 kmalloc(sizeof(dev->alt_max_pkt_size_isoc[0]) * 3268 interface->num_altsetting, GFP_KERNEL); 3269 if (dev->alt_max_pkt_size_isoc == NULL) { 3270 em28xx_errdev("out of memory!\n"); 3271 kfree(dev); 3272 retval = -ENOMEM; 3273 goto err; 3274 } 3275 3276 /* Get endpoints */ 3277 for (i = 0; i < interface->num_altsetting; i++) { 3278 int ep; 3279 3280 for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) { 3281 const struct usb_endpoint_descriptor *e; 3282 int sizedescr, size; 3283 3284 e = &interface->altsetting[i].endpoint[ep].desc; 3285 3286 sizedescr = le16_to_cpu(e->wMaxPacketSize); 3287 size = sizedescr & 0x7ff; 3288 3289 if (udev->speed == USB_SPEED_HIGH) 3290 size = size * hb_mult(sizedescr); 3291 3292 if (usb_endpoint_dir_in(e)) { 3293 switch (e->bEndpointAddress) { 3294 case 0x82: 3295 has_video = true; 3296 if (usb_endpoint_xfer_isoc(e)) { 3297 dev->analog_ep_isoc = 3298 e->bEndpointAddress; 3299 dev->alt_max_pkt_size_isoc[i] = size; 3300 } else if (usb_endpoint_xfer_bulk(e)) { 3301 dev->analog_ep_bulk = 3302 e->bEndpointAddress; 3303 } 3304 break; 3305 case 0x83: 3306 if (usb_endpoint_xfer_isoc(e)) { 3307 has_vendor_audio = true; 3308 } else { 3309 printk(KERN_INFO DRIVER_NAME 3310 ": error: skipping audio endpoint 0x83, because it uses bulk transfers !\n"); 3311 } 3312 break; 3313 case 0x84: 3314 if (has_video && 3315 (usb_endpoint_xfer_bulk(e))) { 3316 dev->analog_ep_bulk = 3317 e->bEndpointAddress; 3318 } else { 3319 if (usb_endpoint_xfer_isoc(e)) { 3320 if (size > dev->dvb_max_pkt_size_isoc) { 3321 has_dvb = true; /* see NOTE (~) */ 3322 dev->dvb_ep_isoc = e->bEndpointAddress; 3323 dev->dvb_max_pkt_size_isoc = size; 3324 dev->dvb_alt_isoc = i; 3325 } 3326 } else { 3327 has_dvb = true; 3328 dev->dvb_ep_bulk = e->bEndpointAddress; 3329 } 3330 } 3331 break; 3332 } 3333 } 3334 /* NOTE: 3335 * Old logic with support for isoc transfers only was: 3336 * 0x82 isoc => analog 3337 * 0x83 isoc => audio 3338 * 0x84 isoc => digital 3339 * 3340 * New logic with support for bulk transfers 3341 * 0x82 isoc => analog 3342 * 0x82 bulk => analog 3343 * 0x83 isoc* => audio 3344 * 0x84 isoc => digital 3345 * 0x84 bulk => analog or digital** 3346 * (*: audio should always be isoc) 3347 * (**: analog, if ep 0x82 is isoc, otherwise digital) 3348 * 3349 * The new logic preserves backwards compatibility and 3350 * reflects the endpoint configurations we have seen 3351 * so far. But there might be devices for which this 3352 * logic is not sufficient... 3353 */ 3354 /* 3355 * NOTE (~): some manufacturers (e.g. Terratec) disable 3356 * endpoints by setting wMaxPacketSize to 0 bytes for 3357 * all alt settings. So far, we've seen this for 3358 * DVB isoc endpoints only. 3359 */ 3360 } 3361 } 3362 3363 if (!(has_vendor_audio || has_video || has_dvb)) { 3364 retval = -ENODEV; 3365 goto err_free; 3366 } 3367 3368 switch (udev->speed) { 3369 case USB_SPEED_LOW: 3370 speed = "1.5"; 3371 break; 3372 case USB_SPEED_UNKNOWN: 3373 case USB_SPEED_FULL: 3374 speed = "12"; 3375 break; 3376 case USB_SPEED_HIGH: 3377 speed = "480"; 3378 break; 3379 default: 3380 speed = "unknown"; 3381 } 3382 3383 printk(KERN_INFO DRIVER_NAME 3384 ": New device %s %s @ %s Mbps " 3385 "(%04x:%04x, interface %d, class %d)\n", 3386 udev->manufacturer ? udev->manufacturer : "", 3387 udev->product ? udev->product : "", 3388 speed, 3389 le16_to_cpu(udev->descriptor.idVendor), 3390 le16_to_cpu(udev->descriptor.idProduct), 3391 ifnum, 3392 interface->altsetting->desc.bInterfaceNumber); 3393 3394 /* 3395 * Make sure we have 480 Mbps of bandwidth, otherwise things like 3396 * video stream wouldn't likely work, since 12 Mbps is generally 3397 * not enough even for most Digital TV streams. 3398 */ 3399 if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) { 3400 printk(DRIVER_NAME ": Device initialization failed.\n"); 3401 printk(DRIVER_NAME ": Device must be connected to a high-speed" 3402 " USB 2.0 port.\n"); 3403 retval = -ENODEV; 3404 goto err_free; 3405 } 3406 3407 dev->devno = nr; 3408 dev->model = id->driver_info; 3409 dev->alt = -1; 3410 dev->is_audio_only = has_vendor_audio && !(has_video || has_dvb); 3411 dev->has_video = has_video; 3412 dev->ifnum = ifnum; 3413 3414 if (has_vendor_audio) { 3415 printk(KERN_INFO DRIVER_NAME ": Audio interface %i found %s\n", 3416 ifnum, "(Vendor Class)"); 3417 dev->usb_audio_type = EM28XX_USB_AUDIO_VENDOR; 3418 } 3419 /* Checks if audio is provided by a USB Audio Class interface */ 3420 for (i = 0; i < udev->config->desc.bNumInterfaces; i++) { 3421 struct usb_interface *uif = udev->config->interface[i]; 3422 3423 if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { 3424 if (has_vendor_audio) 3425 em28xx_err("em28xx: device seems to have vendor AND usb audio class interfaces !\n" 3426 "\t\tThe vendor interface will be ignored. Please contact the developers <linux-media@vger.kernel.org>\n"); 3427 dev->usb_audio_type = EM28XX_USB_AUDIO_CLASS; 3428 break; 3429 } 3430 } 3431 3432 if (has_video) 3433 printk(KERN_INFO DRIVER_NAME 3434 ": Video interface %i found:%s%s\n", 3435 ifnum, 3436 dev->analog_ep_bulk ? " bulk" : "", 3437 dev->analog_ep_isoc ? " isoc" : ""); 3438 if (has_dvb) 3439 printk(KERN_INFO DRIVER_NAME 3440 ": DVB interface %i found:%s%s\n", 3441 ifnum, 3442 dev->dvb_ep_bulk ? " bulk" : "", 3443 dev->dvb_ep_isoc ? " isoc" : ""); 3444 3445 dev->num_alt = interface->num_altsetting; 3446 3447 if ((unsigned)card[nr] < em28xx_bcount) 3448 dev->model = card[nr]; 3449 3450 /* save our data pointer in this interface device */ 3451 usb_set_intfdata(interface, dev); 3452 3453 /* allocate device struct */ 3454 mutex_init(&dev->lock); 3455 retval = em28xx_init_dev(dev, udev, interface, nr); 3456 if (retval) { 3457 goto err_free; 3458 } 3459 3460 if (usb_xfer_mode < 0) { 3461 if (dev->board.is_webcam) 3462 try_bulk = 1; 3463 else 3464 try_bulk = 0; 3465 } else { 3466 try_bulk = usb_xfer_mode > 0; 3467 } 3468 3469 /* Select USB transfer types to use */ 3470 if (has_video) { 3471 if (!dev->analog_ep_isoc || (try_bulk && dev->analog_ep_bulk)) 3472 dev->analog_xfer_bulk = 1; 3473 em28xx_info("analog set to %s mode.\n", 3474 dev->analog_xfer_bulk ? "bulk" : "isoc"); 3475 } 3476 if (has_dvb) { 3477 if (!dev->dvb_ep_isoc || (try_bulk && dev->dvb_ep_bulk)) 3478 dev->dvb_xfer_bulk = 1; 3479 em28xx_info("dvb set to %s mode.\n", 3480 dev->dvb_xfer_bulk ? "bulk" : "isoc"); 3481 } 3482 3483 kref_init(&dev->ref); 3484 3485 request_modules(dev); 3486 3487 /* Should be the last thing to do, to avoid newer udev's to 3488 open the device before fully initializing it 3489 */ 3490 3491 return 0; 3492 3493 err_free: 3494 kfree(dev->alt_max_pkt_size_isoc); 3495 kfree(dev); 3496 3497 err: 3498 clear_bit(nr, em28xx_devused); 3499 3500 err_no_slot: 3501 usb_put_dev(udev); 3502 return retval; 3503 } 3504 3505 /* 3506 * em28xx_usb_disconnect() 3507 * called when the device gets disconnected 3508 * video device will be unregistered on v4l2_close in case it is still open 3509 */ 3510 static void em28xx_usb_disconnect(struct usb_interface *interface) 3511 { 3512 struct em28xx *dev; 3513 3514 dev = usb_get_intfdata(interface); 3515 usb_set_intfdata(interface, NULL); 3516 3517 if (!dev) 3518 return; 3519 3520 dev->disconnected = 1; 3521 3522 em28xx_info("Disconnecting %s\n", dev->name); 3523 3524 flush_request_modules(dev); 3525 3526 em28xx_close_extension(dev); 3527 3528 em28xx_release_resources(dev); 3529 kref_put(&dev->ref, em28xx_free_device); 3530 } 3531 3532 static int em28xx_usb_suspend(struct usb_interface *interface, 3533 pm_message_t message) 3534 { 3535 struct em28xx *dev; 3536 3537 dev = usb_get_intfdata(interface); 3538 if (!dev) 3539 return 0; 3540 em28xx_suspend_extension(dev); 3541 return 0; 3542 } 3543 3544 static int em28xx_usb_resume(struct usb_interface *interface) 3545 { 3546 struct em28xx *dev; 3547 3548 dev = usb_get_intfdata(interface); 3549 if (!dev) 3550 return 0; 3551 em28xx_resume_extension(dev); 3552 return 0; 3553 } 3554 3555 static struct usb_driver em28xx_usb_driver = { 3556 .name = "em28xx", 3557 .probe = em28xx_usb_probe, 3558 .disconnect = em28xx_usb_disconnect, 3559 .suspend = em28xx_usb_suspend, 3560 .resume = em28xx_usb_resume, 3561 .reset_resume = em28xx_usb_resume, 3562 .id_table = em28xx_id_table, 3563 }; 3564 3565 module_usb_driver(em28xx_usb_driver); 3566