1 /* 2 em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB 3 video capture devices 4 5 Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it> 6 Markus Rechberger <mrechberger@gmail.com> 7 Mauro Carvalho Chehab <mchehab@infradead.org> 8 Sascha Sommer <saschasommer@freenet.de> 9 Copyright (C) 2012 Frank Schäfer <fschaefer.oss@googlemail.com> 10 11 This program is free software; you can redistribute it and/or modify 12 it under the terms of the GNU General Public License as published by 13 the Free Software Foundation; either version 2 of the License, or 14 (at your option) any later version. 15 16 This program is distributed in the hope that it will be useful, 17 but WITHOUT ANY WARRANTY; without even the implied warranty of 18 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 GNU General Public License for more details. 20 21 You should have received a copy of the GNU General Public License 22 along with this program; if not, write to the Free Software 23 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 24 */ 25 26 #include "em28xx.h" 27 28 #include <linux/init.h> 29 #include <linux/module.h> 30 #include <linux/slab.h> 31 #include <linux/delay.h> 32 #include <linux/i2c.h> 33 #include <linux/usb.h> 34 #include <media/tuner.h> 35 #include <media/drv-intf/msp3400.h> 36 #include <media/i2c/saa7115.h> 37 #include <dt-bindings/media/tvp5150.h> 38 #include <media/i2c/tvaudio.h> 39 #include <media/i2c-addr.h> 40 #include <media/tveeprom.h> 41 #include <media/v4l2-common.h> 42 #include <sound/ac97_codec.h> 43 44 45 #define DRIVER_NAME "em28xx" 46 47 static int tuner = -1; 48 module_param(tuner, int, 0444); 49 MODULE_PARM_DESC(tuner, "tuner type"); 50 51 static unsigned int disable_ir; 52 module_param(disable_ir, int, 0444); 53 MODULE_PARM_DESC(disable_ir, "disable infrared remote support"); 54 55 static unsigned int disable_usb_speed_check; 56 module_param(disable_usb_speed_check, int, 0444); 57 MODULE_PARM_DESC(disable_usb_speed_check, 58 "override min bandwidth requirement of 480M bps"); 59 60 static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U }; 61 module_param_array(card, int, NULL, 0444); 62 MODULE_PARM_DESC(card, "card type"); 63 64 static int usb_xfer_mode = -1; 65 module_param(usb_xfer_mode, int, 0444); 66 MODULE_PARM_DESC(usb_xfer_mode, 67 "USB transfer mode for frame data (-1 = auto, 0 = prefer isoc, 1 = prefer bulk)"); 68 69 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */ 70 static DECLARE_BITMAP(em28xx_devused, EM28XX_MAXBOARDS); 71 72 struct em28xx_hash_table { 73 unsigned long hash; 74 unsigned int model; 75 unsigned int tuner; 76 }; 77 78 static void em28xx_pre_card_setup(struct em28xx *dev); 79 80 /* 81 * Reset sequences for analog/digital modes 82 */ 83 84 /* Reset for the most [analog] boards */ 85 static struct em28xx_reg_seq default_analog[] = { 86 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 87 { -1, -1, -1, -1}, 88 }; 89 90 /* Reset for the most [digital] boards */ 91 static struct em28xx_reg_seq default_digital[] = { 92 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 93 { -1, -1, -1, -1}, 94 }; 95 96 /* Board Hauppauge WinTV HVR 900 analog */ 97 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = { 98 {EM2820_R08_GPIO_CTRL, 0x2d, ~EM_GPIO_4, 10}, 99 { 0x05, 0xff, 0x10, 10}, 100 { -1, -1, -1, -1}, 101 }; 102 103 /* Board Hauppauge WinTV HVR 900 digital */ 104 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = { 105 {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10}, 106 {EM2880_R04_GPO, 0x04, 0x0f, 10}, 107 {EM2880_R04_GPO, 0x0c, 0x0f, 10}, 108 { -1, -1, -1, -1}, 109 }; 110 111 /* Board Hauppauge WinTV HVR 900 (R2) digital */ 112 static struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = { 113 {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10}, 114 {EM2880_R04_GPO, 0x0c, 0x0f, 10}, 115 { -1, -1, -1, -1}, 116 }; 117 118 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */ 119 static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = { 120 {EM2820_R08_GPIO_CTRL, 0x69, ~EM_GPIO_4, 10}, 121 { -1, -1, -1, -1}, 122 }; 123 124 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */ 125 126 /* Board - EM2870 Kworld 355u 127 Analog - No input analog */ 128 129 /* Board - EM2882 Kworld 315U digital */ 130 static struct em28xx_reg_seq em2882_kworld_315u_digital[] = { 131 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 132 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, 133 {EM2880_R04_GPO, 0x04, 0xff, 10}, 134 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 135 {EM2820_R08_GPIO_CTRL, 0x7e, 0xff, 10}, 136 { -1, -1, -1, -1}, 137 }; 138 139 static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = { 140 {EM2880_R04_GPO, 0x08, 0xff, 10}, 141 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 142 {EM2880_R04_GPO, 0x08, 0xff, 10}, 143 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 144 { -1, -1, -1, -1}, 145 }; 146 147 static struct em28xx_reg_seq kworld_330u_analog[] = { 148 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 149 {EM2880_R04_GPO, 0x00, 0xff, 10}, 150 { -1, -1, -1, -1}, 151 }; 152 153 static struct em28xx_reg_seq kworld_330u_digital[] = { 154 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 155 {EM2880_R04_GPO, 0x08, 0xff, 10}, 156 { -1, -1, -1, -1}, 157 }; 158 159 /* Evga inDtube 160 GPIO0 - Enable digital power (s5h1409) - low to enable 161 GPIO1 - Enable analog power (tvp5150/emp202) - low to enable 162 GPIO4 - xc3028 reset 163 GOP3 - s5h1409 reset 164 */ 165 static struct em28xx_reg_seq evga_indtube_analog[] = { 166 {EM2820_R08_GPIO_CTRL, 0x79, 0xff, 60}, 167 { -1, -1, -1, -1}, 168 }; 169 170 static struct em28xx_reg_seq evga_indtube_digital[] = { 171 {EM2820_R08_GPIO_CTRL, 0x7a, 0xff, 1}, 172 {EM2880_R04_GPO, 0x04, 0xff, 10}, 173 {EM2880_R04_GPO, 0x0c, 0xff, 1}, 174 { -1, -1, -1, -1}, 175 }; 176 177 /* 178 * KWorld PlusTV 340U, UB435-Q and UB435-Q V2 (ATSC) GPIOs map: 179 * EM_GPIO_0 - currently unknown 180 * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on) 181 * EM_GPIO_2 - currently unknown 182 * EM_GPIO_3 - currently unknown 183 * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset) 184 * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset) 185 * EM_GPIO_6 - currently unknown 186 * EM_GPIO_7 - currently unknown 187 */ 188 static struct em28xx_reg_seq kworld_a340_digital[] = { 189 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 190 { -1, -1, -1, -1}, 191 }; 192 193 static struct em28xx_reg_seq kworld_ub435q_v3_digital[] = { 194 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100}, 195 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100}, 196 {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 100}, 197 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100}, 198 { -1, -1, -1, -1}, 199 }; 200 201 /* Pinnacle Hybrid Pro eb1a:2881 */ 202 static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = { 203 {EM2820_R08_GPIO_CTRL, 0xfd, ~EM_GPIO_4, 10}, 204 { -1, -1, -1, -1}, 205 }; 206 207 static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = { 208 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 209 {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */ 210 {EM2880_R04_GPO, 0x0c, 0xff, 1}, 211 { -1, -1, -1, -1}, 212 }; 213 214 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = { 215 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 216 {EM2880_R04_GPO, 0x00, 0xff, 10}, 217 { -1, -1, -1, -1}, 218 }; 219 220 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = { 221 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 222 {EM2880_R04_GPO, 0x08, 0xff, 10}, 223 { -1, -1, -1, -1}, 224 }; 225 226 /* PCTV HD Mini (80e) GPIOs 227 0-5: not used 228 6: demod reset, active low 229 7: LED on, active high */ 230 static struct em28xx_reg_seq em2874_pctv_80e_digital[] = { 231 {EM28XX_R06_I2C_CLK, 0x45, 0xff, 10}, /*400 KHz*/ 232 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 100},/*Demod reset*/ 233 {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 10}, 234 { -1, -1, -1, -1}, 235 }; 236 237 /* eb1a:2868 Reddo DVB-C USB TV Box 238 GPIO4 - CU1216L NIM 239 Other GPIOs seems to be don't care. */ 240 static struct em28xx_reg_seq reddo_dvb_c_usb_box[] = { 241 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, 242 {EM2820_R08_GPIO_CTRL, 0xde, 0xff, 10}, 243 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, 244 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 245 {EM2820_R08_GPIO_CTRL, 0x7f, 0xff, 10}, 246 {EM2820_R08_GPIO_CTRL, 0x6f, 0xff, 10}, 247 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 248 { -1, -1, -1, -1}, 249 }; 250 251 /* Callback for the most boards */ 252 static struct em28xx_reg_seq default_tuner_gpio[] = { 253 {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10}, 254 {EM2820_R08_GPIO_CTRL, 0, EM_GPIO_4, 10}, 255 {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10}, 256 { -1, -1, -1, -1}, 257 }; 258 259 /* Mute/unmute */ 260 static struct em28xx_reg_seq compro_unmute_tv_gpio[] = { 261 {EM2820_R08_GPIO_CTRL, 5, 7, 10}, 262 { -1, -1, -1, -1}, 263 }; 264 265 static struct em28xx_reg_seq compro_unmute_svid_gpio[] = { 266 {EM2820_R08_GPIO_CTRL, 4, 7, 10}, 267 { -1, -1, -1, -1}, 268 }; 269 270 static struct em28xx_reg_seq compro_mute_gpio[] = { 271 {EM2820_R08_GPIO_CTRL, 6, 7, 10}, 272 { -1, -1, -1, -1}, 273 }; 274 275 /* Terratec AV350 */ 276 static struct em28xx_reg_seq terratec_av350_mute_gpio[] = { 277 {EM2820_R08_GPIO_CTRL, 0xff, 0x7f, 10}, 278 { -1, -1, -1, -1}, 279 }; 280 281 static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = { 282 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 283 { -1, -1, -1, -1}, 284 }; 285 286 static struct em28xx_reg_seq silvercrest_reg_seq[] = { 287 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 288 {EM2820_R08_GPIO_CTRL, 0x01, 0xf7, 10}, 289 { -1, -1, -1, -1}, 290 }; 291 292 static struct em28xx_reg_seq vc211a_enable[] = { 293 {EM2820_R08_GPIO_CTRL, 0xff, 0x07, 10}, 294 {EM2820_R08_GPIO_CTRL, 0xff, 0x0f, 10}, 295 {EM2820_R08_GPIO_CTRL, 0xff, 0x0b, 10}, 296 { -1, -1, -1, -1}, 297 }; 298 299 static struct em28xx_reg_seq dikom_dk300_digital[] = { 300 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 301 {EM2880_R04_GPO, 0x08, 0xff, 10}, 302 { -1, -1, -1, -1}, 303 }; 304 305 /* Reset for the most [digital] boards */ 306 static struct em28xx_reg_seq leadership_digital[] = { 307 {EM2874_R80_GPIO_P0_CTRL, 0x70, 0xff, 10}, 308 { -1, -1, -1, -1}, 309 }; 310 311 static struct em28xx_reg_seq leadership_reset[] = { 312 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10}, 313 {EM2874_R80_GPIO_P0_CTRL, 0xb0, 0xff, 10}, 314 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10}, 315 { -1, -1, -1, -1}, 316 }; 317 318 /* 2013:024f PCTV nanoStick T2 290e 319 * GPIO_6 - demod reset 320 * GPIO_7 - LED 321 */ 322 static struct em28xx_reg_seq pctv_290e[] = { 323 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 80}, 324 {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 80}, /* GPIO_6 = 1 */ 325 {EM2874_R80_GPIO_P0_CTRL, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */ 326 { -1, -1, -1, -1}, 327 }; 328 329 #if 0 330 static struct em28xx_reg_seq terratec_h5_gpio[] = { 331 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 332 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100}, 333 {EM2874_R80_GPIO_P0_CTRL, 0xf2, 0xff, 50}, 334 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 50}, 335 { -1, -1, -1, -1}, 336 }; 337 338 static struct em28xx_reg_seq terratec_h5_digital[] = { 339 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10}, 340 {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, 341 {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10}, 342 { -1, -1, -1, -1}, 343 }; 344 #endif 345 346 /* 2013:024f PCTV DVB-S2 Stick 460e 347 * GPIO_0 - POWER_ON 348 * GPIO_1 - BOOST 349 * GPIO_2 - VUV_LNB (red LED) 350 * GPIO_3 - EXT_12V 351 * GPIO_4 - INT_DEM (DEMOD GPIO_0) 352 * GPIO_5 - INT_LNB 353 * GPIO_6 - RESET_DEM 354 * GPIO_7 - LED (green LED) 355 */ 356 static struct em28xx_reg_seq pctv_460e[] = { 357 {EM2874_R80_GPIO_P0_CTRL, 0x01, 0xff, 50}, 358 { 0x0d, 0xff, 0xff, 50}, 359 {EM2874_R80_GPIO_P0_CTRL, 0x41, 0xff, 50}, /* GPIO_6=1 */ 360 { 0x0d, 0x42, 0xff, 50}, 361 {EM2874_R80_GPIO_P0_CTRL, 0x61, 0xff, 50}, /* GPIO_5=1 */ 362 { -1, -1, -1, -1}, 363 }; 364 365 static struct em28xx_reg_seq c3tech_digital_duo_digital[] = { 366 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10}, 367 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, /* xc5000 reset */ 368 {EM2874_R80_GPIO_P0_CTRL, 0xf9, 0xff, 35}, 369 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, 370 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10}, 371 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 10}, 372 {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 10}, 373 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 20}, 374 { -1, -1, -1, -1}, 375 }; 376 377 /* 378 * 2013:0258 PCTV DVB-S2 Stick (461e) 379 * GPIO 0 = POWER_ON 380 * GPIO 1 = BOOST 381 * GPIO 2 = VUV_LNB (red LED) 382 * GPIO 3 = #EXT_12V 383 * GPIO 4 = INT_DEM 384 * GPIO 5 = INT_LNB 385 * GPIO 6 = #RESET_DEM 386 * GPIO 7 = P07_LED (green LED) 387 */ 388 static struct em28xx_reg_seq pctv_461e[] = { 389 {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 0}, 390 {0x0d, 0xff, 0xff, 0}, 391 {EM2874_R80_GPIO_P0_CTRL, 0x3f, 0xff, 100}, /* reset demod */ 392 {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 200}, /* reset demod */ 393 {0x0d, 0x42, 0xff, 0}, 394 {EM2874_R80_GPIO_P0_CTRL, 0xeb, 0xff, 0}, 395 {EM2874_R5F_TS_ENABLE, 0x84, 0x84, 0}, /* parallel? | null discard */ 396 { -1, -1, -1, -1}, 397 }; 398 399 #if 0 400 static struct em28xx_reg_seq hauppauge_930c_gpio[] = { 401 {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10}, 402 {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, /* xc5000 reset */ 403 {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10}, 404 {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, 405 { -1, -1, -1, -1}, 406 }; 407 408 static struct em28xx_reg_seq hauppauge_930c_digital[] = { 409 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10}, 410 {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, 411 {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10}, 412 { -1, -1, -1, -1}, 413 }; 414 #endif 415 416 /* 1b80:e425 MaxMedia UB425-TC 417 * 1b80:e1cc Delock 61959 418 * GPIO_6 - demod reset, 0=active 419 * GPIO_7 - LED, 0=active 420 */ 421 static struct em28xx_reg_seq maxmedia_ub425_tc[] = { 422 {EM2874_R80_GPIO_P0_CTRL, 0x83, 0xff, 100}, 423 {EM2874_R80_GPIO_P0_CTRL, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */ 424 {EM2874_R80_GPIO_P0_CTRL, 0x43, 0xff, 000}, /* GPIO_7 = 0 */ 425 { -1, -1, -1, -1}, 426 }; 427 428 /* 2304:0242 PCTV QuatroStick (510e) 429 * GPIO_2: decoder reset, 0=active 430 * GPIO_4: decoder suspend, 0=active 431 * GPIO_6: demod reset, 0=active 432 * GPIO_7: LED, 1=active 433 */ 434 static struct em28xx_reg_seq pctv_510e[] = { 435 {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100}, 436 {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ 437 {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ 438 { -1, -1, -1, -1}, 439 }; 440 441 /* 2013:0251 PCTV QuatroStick nano (520e) 442 * GPIO_2: decoder reset, 0=active 443 * GPIO_4: decoder suspend, 0=active 444 * GPIO_6: demod reset, 0=active 445 * GPIO_7: LED, 1=active 446 */ 447 static struct em28xx_reg_seq pctv_520e[] = { 448 {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100}, 449 {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ 450 {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ 451 {EM2874_R80_GPIO_P0_CTRL, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */ 452 { -1, -1, -1, -1}, 453 }; 454 455 /* 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam 456 * reg 0x80/0x84: 457 * GPIO_0: capturing LED, 0=on, 1=off 458 * GPIO_2: AV mute button, 0=pressed, 1=unpressed 459 * GPIO 3: illumination button, 0=pressed, 1=unpressed 460 * GPIO_6: illumination/flash LED, 0=on, 1=off 461 * reg 0x81/0x85: 462 * GPIO_7: snapshot button, 0=pressed, 1=unpressed 463 */ 464 static struct em28xx_reg_seq speedlink_vad_laplace_reg_seq[] = { 465 {EM2820_R08_GPIO_CTRL, 0xf7, 0xff, 10}, 466 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xb2, 10}, 467 { -1, -1, -1, -1}, 468 }; 469 470 static struct em28xx_reg_seq pctv_292e[] = { 471 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, 472 {0x0d, 0xff, 0xff, 950}, 473 {EM2874_R80_GPIO_P0_CTRL, 0xbd, 0xff, 100}, 474 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 410}, 475 {EM2874_R80_GPIO_P0_CTRL, 0x7d, 0xff, 300}, 476 {EM2874_R80_GPIO_P0_CTRL, 0x7c, 0xff, 60}, 477 {0x0d, 0x42, 0xff, 50}, 478 {EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0}, 479 {-1, -1, -1, -1}, 480 }; 481 482 static struct em28xx_reg_seq terratec_t2_stick_hd[] = { 483 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, 484 {0x0d, 0xff, 0xff, 600}, 485 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 10}, 486 {EM2874_R80_GPIO_P0_CTRL, 0xbc, 0xff, 100}, 487 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 100}, 488 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 300}, 489 {EM2874_R80_GPIO_P0_CTRL, 0xf8, 0xff, 100}, 490 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 300}, 491 {0x0d, 0x42, 0xff, 1000}, 492 {EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0}, 493 {-1, -1, -1, -1}, 494 }; 495 496 static struct em28xx_reg_seq plex_px_bcud[] = { 497 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, 498 {0x0d, 0xff, 0xff, 0}, 499 {EM2874_R50_IR_CONFIG, 0x01, 0xff, 0}, 500 {EM28XX_R06_I2C_CLK, 0x40, 0xff, 0}, 501 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 100}, 502 {EM28XX_R12_VINENABLE, 0x20, 0x20, 0}, 503 {0x0d, 0x42, 0xff, 1000}, 504 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 10}, 505 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, 506 {0x73, 0xfd, 0xff, 100}, 507 {-1, -1, -1, -1}, 508 }; 509 510 /* 511 * 2040:0265 Hauppauge WinTV-dualHD DVB 512 * reg 0x80/0x84: 513 * GPIO_0: Yellow LED tuner 1, 0=on, 1=off 514 * GPIO_1: Green LED tuner 1, 0=on, 1=off 515 * GPIO_2: Yellow LED tuner 2, 0=on, 1=off 516 * GPIO_3: Green LED tuner 2, 0=on, 1=off 517 * GPIO_5: Reset #2, 0=active 518 * GPIO_6: Reset #1, 0=active 519 */ 520 static struct em28xx_reg_seq hauppauge_dualhd_dvb[] = { 521 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, 522 {0x0d, 0xff, 0xff, 200}, 523 {0x50, 0x04, 0xff, 300}, 524 {EM2874_R80_GPIO_P0_CTRL, 0xbf, 0xff, 100}, /* demod 1 reset */ 525 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100}, 526 {EM2874_R80_GPIO_P0_CTRL, 0xdf, 0xff, 100}, /* demod 2 reset */ 527 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100}, 528 {EM2874_R5F_TS_ENABLE, 0x44, 0xff, 50}, 529 {EM2874_R5D_TS1_PKT_SIZE, 0x05, 0xff, 50}, 530 {EM2874_R5E_TS2_PKT_SIZE, 0x05, 0xff, 50}, 531 {-1, -1, -1, -1}, 532 }; 533 534 /* 535 * Button definitions 536 */ 537 static struct em28xx_button std_snapshot_button[] = { 538 { 539 .role = EM28XX_BUTTON_SNAPSHOT, 540 .reg_r = EM28XX_R0C_USBSUSP, 541 .reg_clearing = EM28XX_R0C_USBSUSP, 542 .mask = EM28XX_R0C_USBSUSP_SNAPSHOT, 543 .inverted = 0, 544 }, 545 {-1, 0, 0, 0, 0}, 546 }; 547 548 static struct em28xx_button speedlink_vad_laplace_buttons[] = { 549 { 550 .role = EM28XX_BUTTON_SNAPSHOT, 551 .reg_r = EM2874_R85_GPIO_P1_STATE, 552 .mask = 0x80, 553 .inverted = 1, 554 }, 555 { 556 .role = EM28XX_BUTTON_ILLUMINATION, 557 .reg_r = EM2874_R84_GPIO_P0_STATE, 558 .mask = 0x08, 559 .inverted = 1, 560 }, 561 {-1, 0, 0, 0, 0}, 562 }; 563 564 /* 565 * LED definitions 566 */ 567 static struct em28xx_led speedlink_vad_laplace_leds[] = { 568 { 569 .role = EM28XX_LED_ANALOG_CAPTURING, 570 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 571 .gpio_mask = 0x01, 572 .inverted = 1, 573 }, 574 { 575 .role = EM28XX_LED_ILLUMINATION, 576 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 577 .gpio_mask = 0x40, 578 .inverted = 1, 579 }, 580 {-1, 0, 0, 0}, 581 }; 582 583 static struct em28xx_led kworld_ub435q_v3_leds[] = { 584 { 585 .role = EM28XX_LED_DIGITAL_CAPTURING, 586 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 587 .gpio_mask = 0x80, 588 .inverted = 1, 589 }, 590 {-1, 0, 0, 0}, 591 }; 592 593 static struct em28xx_led pctv_80e_leds[] = { 594 { 595 .role = EM28XX_LED_DIGITAL_CAPTURING, 596 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 597 .gpio_mask = 0x80, 598 .inverted = 0, 599 }, 600 {-1, 0, 0, 0}, 601 }; 602 603 static struct em28xx_led terratec_grabby_leds[] = { 604 { 605 .role = EM28XX_LED_ANALOG_CAPTURING, 606 .gpio_reg = EM2820_R08_GPIO_CTRL, 607 .gpio_mask = EM_GPIO_3, 608 .inverted = 1, 609 }, 610 {-1, 0, 0, 0}, 611 }; 612 613 static struct em28xx_led hauppauge_dualhd_leds[] = { 614 { 615 .role = EM28XX_LED_DIGITAL_CAPTURING, 616 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 617 .gpio_mask = EM_GPIO_1, 618 .inverted = 1, 619 }, 620 { 621 .role = EM28XX_LED_DIGITAL_CAPTURING_TS2, 622 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 623 .gpio_mask = EM_GPIO_3, 624 .inverted = 1, 625 }, 626 {-1, 0, 0, 0}, 627 }; 628 629 /* 630 * Board definitions 631 */ 632 struct em28xx_board em28xx_boards[] = { 633 [EM2750_BOARD_UNKNOWN] = { 634 .name = "EM2710/EM2750/EM2751 webcam grabber", 635 .xclk = EM28XX_XCLK_FREQUENCY_20MHZ, 636 .tuner_type = TUNER_ABSENT, 637 .is_webcam = 1, 638 .input = { { 639 .type = EM28XX_VMUX_COMPOSITE, 640 .vmux = 0, 641 .amux = EM28XX_AMUX_VIDEO, 642 .gpio = silvercrest_reg_seq, 643 } }, 644 }, 645 [EM2800_BOARD_UNKNOWN] = { 646 .name = "Unknown EM2800 video grabber", 647 .is_em2800 = 1, 648 .tda9887_conf = TDA9887_PRESENT, 649 .decoder = EM28XX_SAA711X, 650 .tuner_type = TUNER_ABSENT, 651 .input = { { 652 .type = EM28XX_VMUX_COMPOSITE, 653 .vmux = SAA7115_COMPOSITE0, 654 .amux = EM28XX_AMUX_LINE_IN, 655 }, { 656 .type = EM28XX_VMUX_SVIDEO, 657 .vmux = SAA7115_SVIDEO3, 658 .amux = EM28XX_AMUX_LINE_IN, 659 } }, 660 }, 661 [EM2820_BOARD_UNKNOWN] = { 662 .name = "Unknown EM2750/28xx video grabber", 663 .tuner_type = TUNER_ABSENT, 664 .is_webcam = 1, /* To enable sensor probe */ 665 }, 666 [EM2750_BOARD_DLCW_130] = { 667 /* Beijing Huaqi Information Digital Technology Co., Ltd */ 668 .name = "Huaqi DLCW-130", 669 .valid = EM28XX_BOARD_NOT_VALIDATED, 670 .xclk = EM28XX_XCLK_FREQUENCY_48MHZ, 671 .tuner_type = TUNER_ABSENT, 672 .is_webcam = 1, 673 .input = { { 674 .type = EM28XX_VMUX_COMPOSITE, 675 .vmux = 0, 676 .amux = EM28XX_AMUX_VIDEO, 677 } }, 678 }, 679 [EM2820_BOARD_KWORLD_PVRTV2800RF] = { 680 .name = "Kworld PVR TV 2800 RF", 681 .tuner_type = TUNER_TEMIC_PAL, 682 .tda9887_conf = TDA9887_PRESENT, 683 .decoder = EM28XX_SAA711X, 684 .input = { { 685 .type = EM28XX_VMUX_COMPOSITE, 686 .vmux = SAA7115_COMPOSITE0, 687 .amux = EM28XX_AMUX_LINE_IN, 688 }, { 689 .type = EM28XX_VMUX_SVIDEO, 690 .vmux = SAA7115_SVIDEO3, 691 .amux = EM28XX_AMUX_LINE_IN, 692 } }, 693 }, 694 [EM2820_BOARD_GADMEI_TVR200] = { 695 .name = "Gadmei TVR200", 696 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 697 .tda9887_conf = TDA9887_PRESENT, 698 .decoder = EM28XX_SAA711X, 699 .input = { { 700 .type = EM28XX_VMUX_TELEVISION, 701 .vmux = SAA7115_COMPOSITE2, 702 .amux = EM28XX_AMUX_LINE_IN, 703 }, { 704 .type = EM28XX_VMUX_COMPOSITE, 705 .vmux = SAA7115_COMPOSITE0, 706 .amux = EM28XX_AMUX_LINE_IN, 707 }, { 708 .type = EM28XX_VMUX_SVIDEO, 709 .vmux = SAA7115_SVIDEO3, 710 .amux = EM28XX_AMUX_LINE_IN, 711 } }, 712 }, 713 [EM2820_BOARD_TERRATEC_CINERGY_250] = { 714 .name = "Terratec Cinergy 250 USB", 715 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 716 .has_ir_i2c = 1, 717 .tda9887_conf = TDA9887_PRESENT, 718 .decoder = EM28XX_SAA711X, 719 .input = { { 720 .type = EM28XX_VMUX_TELEVISION, 721 .vmux = SAA7115_COMPOSITE2, 722 .amux = EM28XX_AMUX_VIDEO, 723 }, { 724 .type = EM28XX_VMUX_COMPOSITE, 725 .vmux = SAA7115_COMPOSITE0, 726 .amux = EM28XX_AMUX_LINE_IN, 727 }, { 728 .type = EM28XX_VMUX_SVIDEO, 729 .vmux = SAA7115_SVIDEO3, 730 .amux = EM28XX_AMUX_LINE_IN, 731 } }, 732 }, 733 [EM2820_BOARD_PINNACLE_USB_2] = { 734 .name = "Pinnacle PCTV USB 2", 735 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 736 .has_ir_i2c = 1, 737 .tda9887_conf = TDA9887_PRESENT, 738 .decoder = EM28XX_SAA711X, 739 .input = { { 740 .type = EM28XX_VMUX_TELEVISION, 741 .vmux = SAA7115_COMPOSITE2, 742 .amux = EM28XX_AMUX_VIDEO, 743 }, { 744 .type = EM28XX_VMUX_COMPOSITE, 745 .vmux = SAA7115_COMPOSITE0, 746 .amux = EM28XX_AMUX_LINE_IN, 747 }, { 748 .type = EM28XX_VMUX_SVIDEO, 749 .vmux = SAA7115_SVIDEO3, 750 .amux = EM28XX_AMUX_LINE_IN, 751 } }, 752 }, 753 [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = { 754 .name = "Hauppauge WinTV USB 2", 755 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 756 .tda9887_conf = TDA9887_PRESENT | 757 TDA9887_PORT1_ACTIVE | 758 TDA9887_PORT2_ACTIVE, 759 .decoder = EM28XX_TVP5150, 760 .has_msp34xx = 1, 761 .has_ir_i2c = 1, 762 .input = { { 763 .type = EM28XX_VMUX_TELEVISION, 764 .vmux = TVP5150_COMPOSITE0, 765 .amux = MSP_INPUT_DEFAULT, 766 }, { 767 .type = EM28XX_VMUX_SVIDEO, 768 .vmux = TVP5150_SVIDEO, 769 .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1, 770 MSP_DSP_IN_SCART, MSP_DSP_IN_SCART), 771 } }, 772 }, 773 [EM2820_BOARD_DLINK_USB_TV] = { 774 .name = "D-Link DUB-T210 TV Tuner", 775 .valid = EM28XX_BOARD_NOT_VALIDATED, 776 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 777 .tda9887_conf = TDA9887_PRESENT, 778 .decoder = EM28XX_SAA711X, 779 .input = { { 780 .type = EM28XX_VMUX_TELEVISION, 781 .vmux = SAA7115_COMPOSITE2, 782 .amux = EM28XX_AMUX_LINE_IN, 783 }, { 784 .type = EM28XX_VMUX_COMPOSITE, 785 .vmux = SAA7115_COMPOSITE0, 786 .amux = EM28XX_AMUX_LINE_IN, 787 }, { 788 .type = EM28XX_VMUX_SVIDEO, 789 .vmux = SAA7115_SVIDEO3, 790 .amux = EM28XX_AMUX_LINE_IN, 791 } }, 792 }, 793 [EM2820_BOARD_HERCULES_SMART_TV_USB2] = { 794 .name = "Hercules Smart TV USB 2.0", 795 .valid = EM28XX_BOARD_NOT_VALIDATED, 796 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 797 .tda9887_conf = TDA9887_PRESENT, 798 .decoder = EM28XX_SAA711X, 799 .input = { { 800 .type = EM28XX_VMUX_TELEVISION, 801 .vmux = SAA7115_COMPOSITE2, 802 .amux = EM28XX_AMUX_LINE_IN, 803 }, { 804 .type = EM28XX_VMUX_COMPOSITE, 805 .vmux = SAA7115_COMPOSITE0, 806 .amux = EM28XX_AMUX_LINE_IN, 807 }, { 808 .type = EM28XX_VMUX_SVIDEO, 809 .vmux = SAA7115_SVIDEO3, 810 .amux = EM28XX_AMUX_LINE_IN, 811 } }, 812 }, 813 [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = { 814 .name = "Pinnacle PCTV USB 2 (Philips FM1216ME)", 815 .valid = EM28XX_BOARD_NOT_VALIDATED, 816 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, 817 .tda9887_conf = TDA9887_PRESENT, 818 .decoder = EM28XX_SAA711X, 819 .input = { { 820 .type = EM28XX_VMUX_TELEVISION, 821 .vmux = SAA7115_COMPOSITE2, 822 .amux = EM28XX_AMUX_VIDEO, 823 }, { 824 .type = EM28XX_VMUX_COMPOSITE, 825 .vmux = SAA7115_COMPOSITE0, 826 .amux = EM28XX_AMUX_LINE_IN, 827 }, { 828 .type = EM28XX_VMUX_SVIDEO, 829 .vmux = SAA7115_SVIDEO3, 830 .amux = EM28XX_AMUX_LINE_IN, 831 } }, 832 }, 833 [EM2820_BOARD_GADMEI_UTV310] = { 834 .name = "Gadmei UTV310", 835 .valid = EM28XX_BOARD_NOT_VALIDATED, 836 .tuner_type = TUNER_TNF_5335MF, 837 .tda9887_conf = TDA9887_PRESENT, 838 .decoder = EM28XX_SAA711X, 839 .input = { { 840 .type = EM28XX_VMUX_TELEVISION, 841 .vmux = SAA7115_COMPOSITE1, 842 .amux = EM28XX_AMUX_LINE_IN, 843 }, { 844 .type = EM28XX_VMUX_COMPOSITE, 845 .vmux = SAA7115_COMPOSITE0, 846 .amux = EM28XX_AMUX_LINE_IN, 847 }, { 848 .type = EM28XX_VMUX_SVIDEO, 849 .vmux = SAA7115_SVIDEO3, 850 .amux = EM28XX_AMUX_LINE_IN, 851 } }, 852 }, 853 [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = { 854 .name = "Leadtek Winfast USB II Deluxe", 855 .valid = EM28XX_BOARD_NOT_VALIDATED, 856 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, 857 .has_ir_i2c = 1, 858 .tvaudio_addr = 0x58, 859 .tda9887_conf = TDA9887_PRESENT | 860 TDA9887_PORT2_ACTIVE | 861 TDA9887_QSS, 862 .decoder = EM28XX_SAA711X, 863 .adecoder = EM28XX_TVAUDIO, 864 .input = { { 865 .type = EM28XX_VMUX_TELEVISION, 866 .vmux = SAA7115_COMPOSITE4, 867 .amux = EM28XX_AMUX_AUX, 868 }, { 869 .type = EM28XX_VMUX_COMPOSITE, 870 .vmux = SAA7115_COMPOSITE5, 871 .amux = EM28XX_AMUX_LINE_IN, 872 }, { 873 .type = EM28XX_VMUX_SVIDEO, 874 .vmux = SAA7115_SVIDEO3, 875 .amux = EM28XX_AMUX_LINE_IN, 876 } }, 877 .radio = { 878 .type = EM28XX_RADIO, 879 .amux = EM28XX_AMUX_AUX, 880 } 881 }, 882 [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = { 883 .name = "Videology 20K14XUSB USB2.0", 884 .valid = EM28XX_BOARD_NOT_VALIDATED, 885 .tuner_type = TUNER_ABSENT, 886 .is_webcam = 1, 887 .input = { { 888 .type = EM28XX_VMUX_COMPOSITE, 889 .vmux = 0, 890 .amux = EM28XX_AMUX_VIDEO, 891 } }, 892 }, 893 [EM2820_BOARD_SILVERCREST_WEBCAM] = { 894 .name = "Silvercrest Webcam 1.3mpix", 895 .tuner_type = TUNER_ABSENT, 896 .is_webcam = 1, 897 .input = { { 898 .type = EM28XX_VMUX_COMPOSITE, 899 .vmux = 0, 900 .amux = EM28XX_AMUX_VIDEO, 901 .gpio = silvercrest_reg_seq, 902 } }, 903 }, 904 [EM2821_BOARD_SUPERCOMP_USB_2] = { 905 .name = "Supercomp USB 2.0 TV", 906 .valid = EM28XX_BOARD_NOT_VALIDATED, 907 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 908 .tda9887_conf = TDA9887_PRESENT | 909 TDA9887_PORT1_ACTIVE | 910 TDA9887_PORT2_ACTIVE, 911 .decoder = EM28XX_SAA711X, 912 .input = { { 913 .type = EM28XX_VMUX_TELEVISION, 914 .vmux = SAA7115_COMPOSITE2, 915 .amux = EM28XX_AMUX_LINE_IN, 916 }, { 917 .type = EM28XX_VMUX_COMPOSITE, 918 .vmux = SAA7115_COMPOSITE0, 919 .amux = EM28XX_AMUX_VIDEO, 920 }, { 921 .type = EM28XX_VMUX_SVIDEO, 922 .vmux = SAA7115_SVIDEO3, 923 .amux = EM28XX_AMUX_LINE_IN, 924 } }, 925 }, 926 [EM2821_BOARD_USBGEAR_VD204] = { 927 .name = "Usbgear VD204v9", 928 .valid = EM28XX_BOARD_NOT_VALIDATED, 929 .tuner_type = TUNER_ABSENT, /* Capture only device */ 930 .decoder = EM28XX_SAA711X, 931 .input = { { 932 .type = EM28XX_VMUX_COMPOSITE, 933 .vmux = SAA7115_COMPOSITE0, 934 .amux = EM28XX_AMUX_LINE_IN, 935 }, { 936 .type = EM28XX_VMUX_SVIDEO, 937 .vmux = SAA7115_SVIDEO3, 938 .amux = EM28XX_AMUX_LINE_IN, 939 } }, 940 }, 941 [EM2860_BOARD_NETGMBH_CAM] = { 942 /* Beijing Huaqi Information Digital Technology Co., Ltd */ 943 .name = "NetGMBH Cam", 944 .valid = EM28XX_BOARD_NOT_VALIDATED, 945 .tuner_type = TUNER_ABSENT, 946 .is_webcam = 1, 947 .input = { { 948 .type = EM28XX_VMUX_COMPOSITE, 949 .vmux = 0, 950 .amux = EM28XX_AMUX_VIDEO, 951 } }, 952 }, 953 [EM2860_BOARD_TYPHOON_DVD_MAKER] = { 954 .name = "Typhoon DVD Maker", 955 .decoder = EM28XX_SAA711X, 956 .tuner_type = TUNER_ABSENT, /* Capture only device */ 957 .input = { { 958 .type = EM28XX_VMUX_COMPOSITE, 959 .vmux = SAA7115_COMPOSITE0, 960 .amux = EM28XX_AMUX_LINE_IN, 961 }, { 962 .type = EM28XX_VMUX_SVIDEO, 963 .vmux = SAA7115_SVIDEO3, 964 .amux = EM28XX_AMUX_LINE_IN, 965 } }, 966 }, 967 [EM2860_BOARD_GADMEI_UTV330] = { 968 .name = "Gadmei UTV330", 969 .valid = EM28XX_BOARD_NOT_VALIDATED, 970 .tuner_type = TUNER_TNF_5335MF, 971 .tda9887_conf = TDA9887_PRESENT, 972 .decoder = EM28XX_SAA711X, 973 .input = { { 974 .type = EM28XX_VMUX_TELEVISION, 975 .vmux = SAA7115_COMPOSITE2, 976 .amux = EM28XX_AMUX_VIDEO, 977 }, { 978 .type = EM28XX_VMUX_COMPOSITE, 979 .vmux = SAA7115_COMPOSITE0, 980 .amux = EM28XX_AMUX_LINE_IN, 981 }, { 982 .type = EM28XX_VMUX_SVIDEO, 983 .vmux = SAA7115_SVIDEO3, 984 .amux = EM28XX_AMUX_LINE_IN, 985 } }, 986 }, 987 [EM2861_BOARD_GADMEI_UTV330PLUS] = { 988 .name = "Gadmei UTV330+", 989 .tuner_type = TUNER_TNF_5335MF, 990 .tda9887_conf = TDA9887_PRESENT, 991 .ir_codes = RC_MAP_GADMEI_RM008Z, 992 .decoder = EM28XX_SAA711X, 993 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 994 .input = { { 995 .type = EM28XX_VMUX_TELEVISION, 996 .vmux = SAA7115_COMPOSITE2, 997 .amux = EM28XX_AMUX_VIDEO, 998 }, { 999 .type = EM28XX_VMUX_COMPOSITE, 1000 .vmux = SAA7115_COMPOSITE0, 1001 .amux = EM28XX_AMUX_LINE_IN, 1002 }, { 1003 .type = EM28XX_VMUX_SVIDEO, 1004 .vmux = SAA7115_SVIDEO3, 1005 .amux = EM28XX_AMUX_LINE_IN, 1006 } }, 1007 }, 1008 [EM2860_BOARD_TERRATEC_HYBRID_XS] = { 1009 .name = "Terratec Cinergy A Hybrid XS", 1010 .valid = EM28XX_BOARD_NOT_VALIDATED, 1011 .tuner_type = TUNER_XC2028, 1012 .tuner_gpio = default_tuner_gpio, 1013 .decoder = EM28XX_TVP5150, 1014 1015 .input = { { 1016 .type = EM28XX_VMUX_TELEVISION, 1017 .vmux = TVP5150_COMPOSITE0, 1018 .amux = EM28XX_AMUX_VIDEO, 1019 .gpio = hauppauge_wintv_hvr_900_analog, 1020 }, { 1021 .type = EM28XX_VMUX_COMPOSITE, 1022 .vmux = TVP5150_COMPOSITE1, 1023 .amux = EM28XX_AMUX_LINE_IN, 1024 .gpio = hauppauge_wintv_hvr_900_analog, 1025 }, { 1026 .type = EM28XX_VMUX_SVIDEO, 1027 .vmux = TVP5150_SVIDEO, 1028 .amux = EM28XX_AMUX_LINE_IN, 1029 .gpio = hauppauge_wintv_hvr_900_analog, 1030 } }, 1031 }, 1032 [EM2861_BOARD_KWORLD_PVRTV_300U] = { 1033 .name = "KWorld PVRTV 300U", 1034 .valid = EM28XX_BOARD_NOT_VALIDATED, 1035 .tuner_type = TUNER_XC2028, 1036 .tuner_gpio = default_tuner_gpio, 1037 .decoder = EM28XX_TVP5150, 1038 .input = { { 1039 .type = EM28XX_VMUX_TELEVISION, 1040 .vmux = TVP5150_COMPOSITE0, 1041 .amux = EM28XX_AMUX_VIDEO, 1042 }, { 1043 .type = EM28XX_VMUX_COMPOSITE, 1044 .vmux = TVP5150_COMPOSITE1, 1045 .amux = EM28XX_AMUX_LINE_IN, 1046 }, { 1047 .type = EM28XX_VMUX_SVIDEO, 1048 .vmux = TVP5150_SVIDEO, 1049 .amux = EM28XX_AMUX_LINE_IN, 1050 } }, 1051 }, 1052 [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = { 1053 .name = "Yakumo MovieMixer", 1054 .tuner_type = TUNER_ABSENT, /* Capture only device */ 1055 .decoder = EM28XX_TVP5150, 1056 .input = { { 1057 .type = EM28XX_VMUX_TELEVISION, 1058 .vmux = TVP5150_COMPOSITE0, 1059 .amux = EM28XX_AMUX_VIDEO, 1060 }, { 1061 .type = EM28XX_VMUX_COMPOSITE, 1062 .vmux = TVP5150_COMPOSITE1, 1063 .amux = EM28XX_AMUX_LINE_IN, 1064 }, { 1065 .type = EM28XX_VMUX_SVIDEO, 1066 .vmux = TVP5150_SVIDEO, 1067 .amux = EM28XX_AMUX_LINE_IN, 1068 } }, 1069 }, 1070 [EM2860_BOARD_TVP5150_REFERENCE_DESIGN] = { 1071 .name = "EM2860/TVP5150 Reference Design", 1072 .tuner_type = TUNER_ABSENT, /* Capture only device */ 1073 .decoder = EM28XX_TVP5150, 1074 .input = { { 1075 .type = EM28XX_VMUX_COMPOSITE, 1076 .vmux = TVP5150_COMPOSITE1, 1077 .amux = EM28XX_AMUX_LINE_IN, 1078 }, { 1079 .type = EM28XX_VMUX_SVIDEO, 1080 .vmux = TVP5150_SVIDEO, 1081 .amux = EM28XX_AMUX_LINE_IN, 1082 } }, 1083 }, 1084 [EM2861_BOARD_PLEXTOR_PX_TV100U] = { 1085 .name = "Plextor ConvertX PX-TV100U", 1086 .tuner_type = TUNER_TNF_5335MF, 1087 .xclk = EM28XX_XCLK_I2S_MSB_TIMING | 1088 EM28XX_XCLK_FREQUENCY_12MHZ, 1089 .tda9887_conf = TDA9887_PRESENT, 1090 .decoder = EM28XX_TVP5150, 1091 .has_msp34xx = 1, 1092 .input = { { 1093 .type = EM28XX_VMUX_TELEVISION, 1094 .vmux = TVP5150_COMPOSITE0, 1095 .amux = EM28XX_AMUX_LINE_IN, 1096 .gpio = pinnacle_hybrid_pro_analog, 1097 }, { 1098 .type = EM28XX_VMUX_COMPOSITE, 1099 .vmux = TVP5150_COMPOSITE1, 1100 .amux = EM28XX_AMUX_LINE_IN, 1101 .gpio = pinnacle_hybrid_pro_analog, 1102 }, { 1103 .type = EM28XX_VMUX_SVIDEO, 1104 .vmux = TVP5150_SVIDEO, 1105 .amux = EM28XX_AMUX_LINE_IN, 1106 .gpio = pinnacle_hybrid_pro_analog, 1107 } }, 1108 }, 1109 1110 /* Those boards with em2870 are DVB Only*/ 1111 1112 [EM2870_BOARD_TERRATEC_XS] = { 1113 .name = "Terratec Cinergy T XS", 1114 .valid = EM28XX_BOARD_NOT_VALIDATED, 1115 .tuner_type = TUNER_XC2028, 1116 .tuner_gpio = default_tuner_gpio, 1117 }, 1118 [EM2870_BOARD_TERRATEC_XS_MT2060] = { 1119 .name = "Terratec Cinergy T XS (MT2060)", 1120 .xclk = EM28XX_XCLK_IR_RC5_MODE | 1121 EM28XX_XCLK_FREQUENCY_12MHZ, 1122 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 1123 .tuner_type = TUNER_ABSENT, /* MT2060 */ 1124 .has_dvb = 1, 1125 .tuner_gpio = default_tuner_gpio, 1126 }, 1127 [EM2870_BOARD_KWORLD_350U] = { 1128 .name = "Kworld 350 U DVB-T", 1129 .valid = EM28XX_BOARD_NOT_VALIDATED, 1130 .tuner_type = TUNER_XC2028, 1131 .tuner_gpio = default_tuner_gpio, 1132 }, 1133 [EM2870_BOARD_KWORLD_355U] = { 1134 .name = "Kworld 355 U DVB-T", 1135 .valid = EM28XX_BOARD_NOT_VALIDATED, 1136 .tuner_type = TUNER_ABSENT, 1137 .tuner_gpio = default_tuner_gpio, 1138 .has_dvb = 1, 1139 .dvb_gpio = default_digital, 1140 }, 1141 [EM2870_BOARD_PINNACLE_PCTV_DVB] = { 1142 .name = "Pinnacle PCTV DVB-T", 1143 .valid = EM28XX_BOARD_NOT_VALIDATED, 1144 .tuner_type = TUNER_ABSENT, /* MT2060 */ 1145 /* djh - I have serious doubts this is right... */ 1146 .xclk = EM28XX_XCLK_IR_RC5_MODE | 1147 EM28XX_XCLK_FREQUENCY_10MHZ, 1148 }, 1149 [EM2870_BOARD_COMPRO_VIDEOMATE] = { 1150 .name = "Compro, VideoMate U3", 1151 .valid = EM28XX_BOARD_NOT_VALIDATED, 1152 .tuner_type = TUNER_ABSENT, /* MT2060 */ 1153 }, 1154 1155 [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = { 1156 .name = "Terratec Hybrid XS Secam", 1157 .has_msp34xx = 1, 1158 .tuner_type = TUNER_XC2028, 1159 .tuner_gpio = default_tuner_gpio, 1160 .decoder = EM28XX_TVP5150, 1161 .has_dvb = 1, 1162 .dvb_gpio = terratec_cinergy_USB_XS_FR_digital, 1163 .input = { { 1164 .type = EM28XX_VMUX_TELEVISION, 1165 .vmux = TVP5150_COMPOSITE0, 1166 .amux = EM28XX_AMUX_VIDEO, 1167 .gpio = terratec_cinergy_USB_XS_FR_analog, 1168 }, { 1169 .type = EM28XX_VMUX_COMPOSITE, 1170 .vmux = TVP5150_COMPOSITE1, 1171 .amux = EM28XX_AMUX_LINE_IN, 1172 .gpio = terratec_cinergy_USB_XS_FR_analog, 1173 }, { 1174 .type = EM28XX_VMUX_SVIDEO, 1175 .vmux = TVP5150_SVIDEO, 1176 .amux = EM28XX_AMUX_LINE_IN, 1177 .gpio = terratec_cinergy_USB_XS_FR_analog, 1178 } }, 1179 }, 1180 [EM2884_BOARD_TERRATEC_H5] = { 1181 .name = "Terratec Cinergy H5", 1182 .has_dvb = 1, 1183 #if 0 1184 .tuner_type = TUNER_PHILIPS_TDA8290, 1185 .tuner_addr = 0x41, 1186 .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */ 1187 .tuner_gpio = terratec_h5_gpio, 1188 #else 1189 .tuner_type = TUNER_ABSENT, 1190 #endif 1191 .def_i2c_bus = 1, 1192 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1193 EM28XX_I2C_FREQ_400_KHZ, 1194 }, 1195 [EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = { 1196 .name = "Hauppauge WinTV HVR 930C", 1197 .has_dvb = 1, 1198 #if 0 /* FIXME: Add analog support */ 1199 .tuner_type = TUNER_XC5000, 1200 .tuner_addr = 0x41, 1201 .dvb_gpio = hauppauge_930c_digital, 1202 .tuner_gpio = hauppauge_930c_gpio, 1203 #else 1204 .tuner_type = TUNER_ABSENT, 1205 #endif 1206 .ir_codes = RC_MAP_HAUPPAUGE, 1207 .def_i2c_bus = 1, 1208 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1209 EM28XX_I2C_FREQ_400_KHZ, 1210 }, 1211 [EM2884_BOARD_C3TECH_DIGITAL_DUO] = { 1212 .name = "C3 Tech Digital Duo HDTV/SDTV USB", 1213 .has_dvb = 1, 1214 /* FIXME: Add analog support - need a saa7136 driver */ 1215 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */ 1216 .ir_codes = RC_MAP_EMPTY, 1217 .def_i2c_bus = 1, 1218 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 1219 .dvb_gpio = c3tech_digital_duo_digital, 1220 }, 1221 [EM2884_BOARD_CINERGY_HTC_STICK] = { 1222 .name = "Terratec Cinergy HTC Stick", 1223 .has_dvb = 1, 1224 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, 1225 .tuner_type = TUNER_ABSENT, 1226 .def_i2c_bus = 1, 1227 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1228 EM28XX_I2C_FREQ_400_KHZ, 1229 }, 1230 [EM2884_BOARD_ELGATO_EYETV_HYBRID_2008] = { 1231 .name = "Elgato EyeTV Hybrid 2008 INT", 1232 .has_dvb = 1, 1233 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, 1234 .tuner_type = TUNER_ABSENT, 1235 .def_i2c_bus = 1, 1236 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1237 EM28XX_I2C_FREQ_400_KHZ, 1238 }, 1239 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = { 1240 .name = "Hauppauge WinTV HVR 900", 1241 .tda9887_conf = TDA9887_PRESENT, 1242 .tuner_type = TUNER_XC2028, 1243 .tuner_gpio = default_tuner_gpio, 1244 .mts_firmware = 1, 1245 .has_dvb = 1, 1246 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1247 .ir_codes = RC_MAP_HAUPPAUGE, 1248 .decoder = EM28XX_TVP5150, 1249 .input = { { 1250 .type = EM28XX_VMUX_TELEVISION, 1251 .vmux = TVP5150_COMPOSITE0, 1252 .amux = EM28XX_AMUX_VIDEO, 1253 .gpio = hauppauge_wintv_hvr_900_analog, 1254 }, { 1255 .type = EM28XX_VMUX_COMPOSITE, 1256 .vmux = TVP5150_COMPOSITE1, 1257 .amux = EM28XX_AMUX_LINE_IN, 1258 .gpio = hauppauge_wintv_hvr_900_analog, 1259 }, { 1260 .type = EM28XX_VMUX_SVIDEO, 1261 .vmux = TVP5150_SVIDEO, 1262 .amux = EM28XX_AMUX_LINE_IN, 1263 .gpio = hauppauge_wintv_hvr_900_analog, 1264 } }, 1265 }, 1266 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = { 1267 .name = "Hauppauge WinTV HVR 900 (R2)", 1268 .tda9887_conf = TDA9887_PRESENT, 1269 .tuner_type = TUNER_XC2028, 1270 .tuner_gpio = default_tuner_gpio, 1271 .mts_firmware = 1, 1272 .has_dvb = 1, 1273 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, 1274 .ir_codes = RC_MAP_HAUPPAUGE, 1275 .decoder = EM28XX_TVP5150, 1276 .input = { { 1277 .type = EM28XX_VMUX_TELEVISION, 1278 .vmux = TVP5150_COMPOSITE0, 1279 .amux = EM28XX_AMUX_VIDEO, 1280 .gpio = hauppauge_wintv_hvr_900_analog, 1281 }, { 1282 .type = EM28XX_VMUX_COMPOSITE, 1283 .vmux = TVP5150_COMPOSITE1, 1284 .amux = EM28XX_AMUX_LINE_IN, 1285 .gpio = hauppauge_wintv_hvr_900_analog, 1286 }, { 1287 .type = EM28XX_VMUX_SVIDEO, 1288 .vmux = TVP5150_SVIDEO, 1289 .amux = EM28XX_AMUX_LINE_IN, 1290 .gpio = hauppauge_wintv_hvr_900_analog, 1291 } }, 1292 }, 1293 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = { 1294 .name = "Hauppauge WinTV HVR 850", 1295 .tuner_type = TUNER_XC2028, 1296 .tuner_gpio = default_tuner_gpio, 1297 .mts_firmware = 1, 1298 .has_dvb = 1, 1299 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1300 .ir_codes = RC_MAP_HAUPPAUGE, 1301 .decoder = EM28XX_TVP5150, 1302 .input = { { 1303 .type = EM28XX_VMUX_TELEVISION, 1304 .vmux = TVP5150_COMPOSITE0, 1305 .amux = EM28XX_AMUX_VIDEO, 1306 .gpio = hauppauge_wintv_hvr_900_analog, 1307 }, { 1308 .type = EM28XX_VMUX_COMPOSITE, 1309 .vmux = TVP5150_COMPOSITE1, 1310 .amux = EM28XX_AMUX_LINE_IN, 1311 .gpio = hauppauge_wintv_hvr_900_analog, 1312 }, { 1313 .type = EM28XX_VMUX_SVIDEO, 1314 .vmux = TVP5150_SVIDEO, 1315 .amux = EM28XX_AMUX_LINE_IN, 1316 .gpio = hauppauge_wintv_hvr_900_analog, 1317 } }, 1318 }, 1319 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = { 1320 .name = "Hauppauge WinTV HVR 950", 1321 .tuner_type = TUNER_XC2028, 1322 .tuner_gpio = default_tuner_gpio, 1323 .mts_firmware = 1, 1324 .has_dvb = 1, 1325 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1326 .ir_codes = RC_MAP_HAUPPAUGE, 1327 .decoder = EM28XX_TVP5150, 1328 .input = { { 1329 .type = EM28XX_VMUX_TELEVISION, 1330 .vmux = TVP5150_COMPOSITE0, 1331 .amux = EM28XX_AMUX_VIDEO, 1332 .gpio = hauppauge_wintv_hvr_900_analog, 1333 }, { 1334 .type = EM28XX_VMUX_COMPOSITE, 1335 .vmux = TVP5150_COMPOSITE1, 1336 .amux = EM28XX_AMUX_LINE_IN, 1337 .gpio = hauppauge_wintv_hvr_900_analog, 1338 }, { 1339 .type = EM28XX_VMUX_SVIDEO, 1340 .vmux = TVP5150_SVIDEO, 1341 .amux = EM28XX_AMUX_LINE_IN, 1342 .gpio = hauppauge_wintv_hvr_900_analog, 1343 } }, 1344 }, 1345 [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = { 1346 .name = "Pinnacle PCTV HD Pro Stick", 1347 .tuner_type = TUNER_XC2028, 1348 .tuner_gpio = default_tuner_gpio, 1349 .mts_firmware = 1, 1350 .has_dvb = 1, 1351 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1352 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 1353 .decoder = EM28XX_TVP5150, 1354 .input = { { 1355 .type = EM28XX_VMUX_TELEVISION, 1356 .vmux = TVP5150_COMPOSITE0, 1357 .amux = EM28XX_AMUX_VIDEO, 1358 .gpio = hauppauge_wintv_hvr_900_analog, 1359 }, { 1360 .type = EM28XX_VMUX_COMPOSITE, 1361 .vmux = TVP5150_COMPOSITE1, 1362 .amux = EM28XX_AMUX_LINE_IN, 1363 .gpio = hauppauge_wintv_hvr_900_analog, 1364 }, { 1365 .type = EM28XX_VMUX_SVIDEO, 1366 .vmux = TVP5150_SVIDEO, 1367 .amux = EM28XX_AMUX_LINE_IN, 1368 .gpio = hauppauge_wintv_hvr_900_analog, 1369 } }, 1370 }, 1371 [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = { 1372 .name = "AMD ATI TV Wonder HD 600", 1373 .tuner_type = TUNER_XC2028, 1374 .tuner_gpio = default_tuner_gpio, 1375 .mts_firmware = 1, 1376 .has_dvb = 1, 1377 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1378 .ir_codes = RC_MAP_ATI_TV_WONDER_HD_600, 1379 .decoder = EM28XX_TVP5150, 1380 .input = { { 1381 .type = EM28XX_VMUX_TELEVISION, 1382 .vmux = TVP5150_COMPOSITE0, 1383 .amux = EM28XX_AMUX_VIDEO, 1384 .gpio = hauppauge_wintv_hvr_900_analog, 1385 }, { 1386 .type = EM28XX_VMUX_COMPOSITE, 1387 .vmux = TVP5150_COMPOSITE1, 1388 .amux = EM28XX_AMUX_LINE_IN, 1389 .gpio = hauppauge_wintv_hvr_900_analog, 1390 }, { 1391 .type = EM28XX_VMUX_SVIDEO, 1392 .vmux = TVP5150_SVIDEO, 1393 .amux = EM28XX_AMUX_LINE_IN, 1394 .gpio = hauppauge_wintv_hvr_900_analog, 1395 } }, 1396 }, 1397 [EM2880_BOARD_TERRATEC_HYBRID_XS] = { 1398 .name = "Terratec Hybrid XS", 1399 .tuner_type = TUNER_XC2028, 1400 .tuner_gpio = default_tuner_gpio, 1401 .decoder = EM28XX_TVP5150, 1402 .has_dvb = 1, 1403 .dvb_gpio = default_digital, 1404 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS, 1405 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 1406 .input = { { 1407 .type = EM28XX_VMUX_TELEVISION, 1408 .vmux = TVP5150_COMPOSITE0, 1409 .amux = EM28XX_AMUX_VIDEO, 1410 .gpio = default_analog, 1411 }, { 1412 .type = EM28XX_VMUX_COMPOSITE, 1413 .vmux = TVP5150_COMPOSITE1, 1414 .amux = EM28XX_AMUX_LINE_IN, 1415 .gpio = default_analog, 1416 }, { 1417 .type = EM28XX_VMUX_SVIDEO, 1418 .vmux = TVP5150_SVIDEO, 1419 .amux = EM28XX_AMUX_LINE_IN, 1420 .gpio = default_analog, 1421 } }, 1422 }, 1423 /* maybe there's a reason behind it why Terratec sells the Hybrid XS 1424 as Prodigy XS with a different PID, let's keep it separated for now 1425 maybe we'll need it lateron */ 1426 [EM2880_BOARD_TERRATEC_PRODIGY_XS] = { 1427 .name = "Terratec Prodigy XS", 1428 .tuner_type = TUNER_XC2028, 1429 .tuner_gpio = default_tuner_gpio, 1430 .decoder = EM28XX_TVP5150, 1431 .input = { { 1432 .type = EM28XX_VMUX_TELEVISION, 1433 .vmux = TVP5150_COMPOSITE0, 1434 .amux = EM28XX_AMUX_VIDEO, 1435 .gpio = hauppauge_wintv_hvr_900_analog, 1436 }, { 1437 .type = EM28XX_VMUX_COMPOSITE, 1438 .vmux = TVP5150_COMPOSITE1, 1439 .amux = EM28XX_AMUX_LINE_IN, 1440 .gpio = hauppauge_wintv_hvr_900_analog, 1441 }, { 1442 .type = EM28XX_VMUX_SVIDEO, 1443 .vmux = TVP5150_SVIDEO, 1444 .amux = EM28XX_AMUX_LINE_IN, 1445 .gpio = hauppauge_wintv_hvr_900_analog, 1446 } }, 1447 }, 1448 [EM2820_BOARD_MSI_VOX_USB_2] = { 1449 .name = "MSI VOX USB 2.0", 1450 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1451 .tda9887_conf = TDA9887_PRESENT | 1452 TDA9887_PORT1_ACTIVE | 1453 TDA9887_PORT2_ACTIVE, 1454 .max_range_640_480 = 1, 1455 .decoder = EM28XX_SAA711X, 1456 .input = { { 1457 .type = EM28XX_VMUX_TELEVISION, 1458 .vmux = SAA7115_COMPOSITE4, 1459 .amux = EM28XX_AMUX_VIDEO, 1460 }, { 1461 .type = EM28XX_VMUX_COMPOSITE, 1462 .vmux = SAA7115_COMPOSITE0, 1463 .amux = EM28XX_AMUX_LINE_IN, 1464 }, { 1465 .type = EM28XX_VMUX_SVIDEO, 1466 .vmux = SAA7115_SVIDEO3, 1467 .amux = EM28XX_AMUX_LINE_IN, 1468 } }, 1469 }, 1470 [EM2800_BOARD_TERRATEC_CINERGY_200] = { 1471 .name = "Terratec Cinergy 200 USB", 1472 .is_em2800 = 1, 1473 .has_ir_i2c = 1, 1474 .tuner_type = TUNER_LG_TALN, 1475 .tda9887_conf = TDA9887_PRESENT, 1476 .decoder = EM28XX_SAA711X, 1477 .input = { { 1478 .type = EM28XX_VMUX_TELEVISION, 1479 .vmux = SAA7115_COMPOSITE2, 1480 .amux = EM28XX_AMUX_VIDEO, 1481 }, { 1482 .type = EM28XX_VMUX_COMPOSITE, 1483 .vmux = SAA7115_COMPOSITE0, 1484 .amux = EM28XX_AMUX_LINE_IN, 1485 }, { 1486 .type = EM28XX_VMUX_SVIDEO, 1487 .vmux = SAA7115_SVIDEO3, 1488 .amux = EM28XX_AMUX_LINE_IN, 1489 } }, 1490 }, 1491 [EM2800_BOARD_GRABBEEX_USB2800] = { 1492 .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder", 1493 .is_em2800 = 1, 1494 .decoder = EM28XX_SAA711X, 1495 .tuner_type = TUNER_ABSENT, /* capture only board */ 1496 .input = { { 1497 .type = EM28XX_VMUX_COMPOSITE, 1498 .vmux = SAA7115_COMPOSITE0, 1499 .amux = EM28XX_AMUX_LINE_IN, 1500 }, { 1501 .type = EM28XX_VMUX_SVIDEO, 1502 .vmux = SAA7115_SVIDEO3, 1503 .amux = EM28XX_AMUX_LINE_IN, 1504 } }, 1505 }, 1506 [EM2800_BOARD_VC211A] = { 1507 .name = "Actionmaster/LinXcel/Digitus VC211A", 1508 .is_em2800 = 1, 1509 .tuner_type = TUNER_ABSENT, /* Capture-only board */ 1510 .decoder = EM28XX_SAA711X, 1511 .input = { { 1512 .type = EM28XX_VMUX_COMPOSITE, 1513 .vmux = SAA7115_COMPOSITE0, 1514 .amux = EM28XX_AMUX_LINE_IN, 1515 .gpio = vc211a_enable, 1516 }, { 1517 .type = EM28XX_VMUX_SVIDEO, 1518 .vmux = SAA7115_SVIDEO3, 1519 .amux = EM28XX_AMUX_LINE_IN, 1520 .gpio = vc211a_enable, 1521 } }, 1522 }, 1523 [EM2800_BOARD_LEADTEK_WINFAST_USBII] = { 1524 .name = "Leadtek Winfast USB II", 1525 .is_em2800 = 1, 1526 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1527 .tda9887_conf = TDA9887_PRESENT, 1528 .decoder = EM28XX_SAA711X, 1529 .input = { { 1530 .type = EM28XX_VMUX_TELEVISION, 1531 .vmux = SAA7115_COMPOSITE2, 1532 .amux = EM28XX_AMUX_VIDEO, 1533 }, { 1534 .type = EM28XX_VMUX_COMPOSITE, 1535 .vmux = SAA7115_COMPOSITE0, 1536 .amux = EM28XX_AMUX_LINE_IN, 1537 }, { 1538 .type = EM28XX_VMUX_SVIDEO, 1539 .vmux = SAA7115_SVIDEO3, 1540 .amux = EM28XX_AMUX_LINE_IN, 1541 } }, 1542 }, 1543 [EM2800_BOARD_KWORLD_USB2800] = { 1544 .name = "Kworld USB2800", 1545 .is_em2800 = 1, 1546 .tuner_type = TUNER_PHILIPS_FCV1236D, 1547 .tda9887_conf = TDA9887_PRESENT, 1548 .decoder = EM28XX_SAA711X, 1549 .input = { { 1550 .type = EM28XX_VMUX_TELEVISION, 1551 .vmux = SAA7115_COMPOSITE2, 1552 .amux = EM28XX_AMUX_VIDEO, 1553 }, { 1554 .type = EM28XX_VMUX_COMPOSITE, 1555 .vmux = SAA7115_COMPOSITE0, 1556 .amux = EM28XX_AMUX_LINE_IN, 1557 }, { 1558 .type = EM28XX_VMUX_SVIDEO, 1559 .vmux = SAA7115_SVIDEO3, 1560 .amux = EM28XX_AMUX_LINE_IN, 1561 } }, 1562 }, 1563 [EM2820_BOARD_PINNACLE_DVC_90] = { 1564 .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U", 1565 .tuner_type = TUNER_ABSENT, /* capture only board */ 1566 .decoder = EM28XX_SAA711X, 1567 .input = { { 1568 .type = EM28XX_VMUX_COMPOSITE, 1569 .vmux = SAA7115_COMPOSITE0, 1570 .amux = EM28XX_AMUX_LINE_IN, 1571 }, { 1572 .type = EM28XX_VMUX_SVIDEO, 1573 .vmux = SAA7115_SVIDEO3, 1574 .amux = EM28XX_AMUX_LINE_IN, 1575 } }, 1576 }, 1577 [EM2800_BOARD_VGEAR_POCKETTV] = { 1578 .name = "V-Gear PocketTV", 1579 .is_em2800 = 1, 1580 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1581 .tda9887_conf = TDA9887_PRESENT, 1582 .decoder = EM28XX_SAA711X, 1583 .input = { { 1584 .type = EM28XX_VMUX_TELEVISION, 1585 .vmux = SAA7115_COMPOSITE2, 1586 .amux = EM28XX_AMUX_VIDEO, 1587 }, { 1588 .type = EM28XX_VMUX_COMPOSITE, 1589 .vmux = SAA7115_COMPOSITE0, 1590 .amux = EM28XX_AMUX_LINE_IN, 1591 }, { 1592 .type = EM28XX_VMUX_SVIDEO, 1593 .vmux = SAA7115_SVIDEO3, 1594 .amux = EM28XX_AMUX_LINE_IN, 1595 } }, 1596 }, 1597 [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = { 1598 .name = "Pixelview PlayTV Box 4 USB 2.0", 1599 .tda9887_conf = TDA9887_PRESENT, 1600 .tuner_type = TUNER_YMEC_TVF_5533MF, 1601 .decoder = EM28XX_SAA711X, 1602 .input = { { 1603 .type = EM28XX_VMUX_TELEVISION, 1604 .vmux = SAA7115_COMPOSITE2, 1605 .amux = EM28XX_AMUX_VIDEO, 1606 .aout = EM28XX_AOUT_MONO | /* I2S */ 1607 EM28XX_AOUT_MASTER, /* Line out pin */ 1608 }, { 1609 .type = EM28XX_VMUX_COMPOSITE, 1610 .vmux = SAA7115_COMPOSITE0, 1611 .amux = EM28XX_AMUX_LINE_IN, 1612 }, { 1613 .type = EM28XX_VMUX_SVIDEO, 1614 .vmux = SAA7115_SVIDEO3, 1615 .amux = EM28XX_AMUX_LINE_IN, 1616 } }, 1617 }, 1618 [EM2820_BOARD_PROLINK_PLAYTV_USB2] = { 1619 .name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0", 1620 .buttons = std_snapshot_button, 1621 .tda9887_conf = TDA9887_PRESENT, 1622 .tuner_type = TUNER_YMEC_TVF_5533MF, 1623 .tuner_addr = 0x60, 1624 .decoder = EM28XX_SAA711X, 1625 .input = { { 1626 .type = EM28XX_VMUX_TELEVISION, 1627 .vmux = SAA7115_COMPOSITE2, 1628 .amux = EM28XX_AMUX_VIDEO, 1629 .aout = EM28XX_AOUT_MONO | /* I2S */ 1630 EM28XX_AOUT_MASTER, /* Line out pin */ 1631 }, { 1632 .type = EM28XX_VMUX_COMPOSITE, 1633 .vmux = SAA7115_COMPOSITE0, 1634 .amux = EM28XX_AMUX_LINE_IN, 1635 }, { 1636 .type = EM28XX_VMUX_SVIDEO, 1637 .vmux = SAA7115_SVIDEO3, 1638 .amux = EM28XX_AMUX_LINE_IN, 1639 } }, 1640 }, 1641 [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = { 1642 .name = "EM2860/SAA711X Reference Design", 1643 .buttons = std_snapshot_button, 1644 .tuner_type = TUNER_ABSENT, 1645 .decoder = EM28XX_SAA711X, 1646 .input = { { 1647 .type = EM28XX_VMUX_SVIDEO, 1648 .vmux = SAA7115_SVIDEO3, 1649 }, { 1650 .type = EM28XX_VMUX_COMPOSITE, 1651 .vmux = SAA7115_COMPOSITE0, 1652 } }, 1653 }, 1654 1655 [EM2874_BOARD_LEADERSHIP_ISDBT] = { 1656 .def_i2c_bus = 1, 1657 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1658 EM28XX_I2C_FREQ_100_KHZ, 1659 .xclk = EM28XX_XCLK_FREQUENCY_10MHZ, 1660 .name = "EM2874 Leadership ISDBT", 1661 .tuner_type = TUNER_ABSENT, 1662 .tuner_gpio = leadership_reset, 1663 .dvb_gpio = leadership_digital, 1664 .has_dvb = 1, 1665 }, 1666 1667 [EM2880_BOARD_MSI_DIGIVOX_AD] = { 1668 .name = "MSI DigiVox A/D", 1669 .valid = EM28XX_BOARD_NOT_VALIDATED, 1670 .tuner_type = TUNER_XC2028, 1671 .tuner_gpio = default_tuner_gpio, 1672 .decoder = EM28XX_TVP5150, 1673 .input = { { 1674 .type = EM28XX_VMUX_TELEVISION, 1675 .vmux = TVP5150_COMPOSITE0, 1676 .amux = EM28XX_AMUX_VIDEO, 1677 .gpio = em2880_msi_digivox_ad_analog, 1678 }, { 1679 .type = EM28XX_VMUX_COMPOSITE, 1680 .vmux = TVP5150_COMPOSITE1, 1681 .amux = EM28XX_AMUX_LINE_IN, 1682 .gpio = em2880_msi_digivox_ad_analog, 1683 }, { 1684 .type = EM28XX_VMUX_SVIDEO, 1685 .vmux = TVP5150_SVIDEO, 1686 .amux = EM28XX_AMUX_LINE_IN, 1687 .gpio = em2880_msi_digivox_ad_analog, 1688 } }, 1689 }, 1690 [EM2880_BOARD_MSI_DIGIVOX_AD_II] = { 1691 .name = "MSI DigiVox A/D II", 1692 .valid = EM28XX_BOARD_NOT_VALIDATED, 1693 .tuner_type = TUNER_XC2028, 1694 .tuner_gpio = default_tuner_gpio, 1695 .decoder = EM28XX_TVP5150, 1696 .input = { { 1697 .type = EM28XX_VMUX_TELEVISION, 1698 .vmux = TVP5150_COMPOSITE0, 1699 .amux = EM28XX_AMUX_VIDEO, 1700 .gpio = em2880_msi_digivox_ad_analog, 1701 }, { 1702 .type = EM28XX_VMUX_COMPOSITE, 1703 .vmux = TVP5150_COMPOSITE1, 1704 .amux = EM28XX_AMUX_LINE_IN, 1705 .gpio = em2880_msi_digivox_ad_analog, 1706 }, { 1707 .type = EM28XX_VMUX_SVIDEO, 1708 .vmux = TVP5150_SVIDEO, 1709 .amux = EM28XX_AMUX_LINE_IN, 1710 .gpio = em2880_msi_digivox_ad_analog, 1711 } }, 1712 }, 1713 [EM2880_BOARD_KWORLD_DVB_305U] = { 1714 .name = "KWorld DVB-T 305U", 1715 .tuner_type = TUNER_XC2028, 1716 .tuner_gpio = default_tuner_gpio, 1717 .decoder = EM28XX_TVP5150, 1718 .input = { { 1719 .type = EM28XX_VMUX_TELEVISION, 1720 .vmux = TVP5150_COMPOSITE0, 1721 .amux = EM28XX_AMUX_VIDEO, 1722 }, { 1723 .type = EM28XX_VMUX_COMPOSITE, 1724 .vmux = TVP5150_COMPOSITE1, 1725 .amux = EM28XX_AMUX_LINE_IN, 1726 }, { 1727 .type = EM28XX_VMUX_SVIDEO, 1728 .vmux = TVP5150_SVIDEO, 1729 .amux = EM28XX_AMUX_LINE_IN, 1730 } }, 1731 }, 1732 [EM2880_BOARD_KWORLD_DVB_310U] = { 1733 .name = "KWorld DVB-T 310U", 1734 .tuner_type = TUNER_XC2028, 1735 .tuner_gpio = default_tuner_gpio, 1736 .has_dvb = 1, 1737 .dvb_gpio = default_digital, 1738 .mts_firmware = 1, 1739 .decoder = EM28XX_TVP5150, 1740 .input = { { 1741 .type = EM28XX_VMUX_TELEVISION, 1742 .vmux = TVP5150_COMPOSITE0, 1743 .amux = EM28XX_AMUX_VIDEO, 1744 .gpio = default_analog, 1745 }, { 1746 .type = EM28XX_VMUX_COMPOSITE, 1747 .vmux = TVP5150_COMPOSITE1, 1748 .amux = EM28XX_AMUX_LINE_IN, 1749 .gpio = default_analog, 1750 }, { /* S-video has not been tested yet */ 1751 .type = EM28XX_VMUX_SVIDEO, 1752 .vmux = TVP5150_SVIDEO, 1753 .amux = EM28XX_AMUX_LINE_IN, 1754 .gpio = default_analog, 1755 } }, 1756 }, 1757 [EM2882_BOARD_KWORLD_ATSC_315U] = { 1758 .name = "KWorld ATSC 315U HDTV TV Box", 1759 .valid = EM28XX_BOARD_NOT_VALIDATED, 1760 .tuner_type = TUNER_THOMSON_DTT761X, 1761 .tuner_gpio = em2882_kworld_315u_tuner_gpio, 1762 .tda9887_conf = TDA9887_PRESENT, 1763 .decoder = EM28XX_SAA711X, 1764 .has_dvb = 1, 1765 .dvb_gpio = em2882_kworld_315u_digital, 1766 .ir_codes = RC_MAP_KWORLD_315U, 1767 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1768 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 1769 /* Analog mode - still not ready */ 1770 /*.input = { { 1771 .type = EM28XX_VMUX_TELEVISION, 1772 .vmux = SAA7115_COMPOSITE2, 1773 .amux = EM28XX_AMUX_VIDEO, 1774 .gpio = em2882_kworld_315u_analog, 1775 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1776 }, { 1777 .type = EM28XX_VMUX_COMPOSITE, 1778 .vmux = SAA7115_COMPOSITE0, 1779 .amux = EM28XX_AMUX_LINE_IN, 1780 .gpio = em2882_kworld_315u_analog1, 1781 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1782 }, { 1783 .type = EM28XX_VMUX_SVIDEO, 1784 .vmux = SAA7115_SVIDEO3, 1785 .amux = EM28XX_AMUX_LINE_IN, 1786 .gpio = em2882_kworld_315u_analog1, 1787 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1788 } }, */ 1789 }, 1790 [EM2880_BOARD_EMPIRE_DUAL_TV] = { 1791 .name = "Empire dual TV", 1792 .tuner_type = TUNER_XC2028, 1793 .tuner_gpio = default_tuner_gpio, 1794 .has_dvb = 1, 1795 .dvb_gpio = default_digital, 1796 .mts_firmware = 1, 1797 .decoder = EM28XX_TVP5150, 1798 .input = { { 1799 .type = EM28XX_VMUX_TELEVISION, 1800 .vmux = TVP5150_COMPOSITE0, 1801 .amux = EM28XX_AMUX_VIDEO, 1802 .gpio = default_analog, 1803 }, { 1804 .type = EM28XX_VMUX_COMPOSITE, 1805 .vmux = TVP5150_COMPOSITE1, 1806 .amux = EM28XX_AMUX_LINE_IN, 1807 .gpio = default_analog, 1808 }, { 1809 .type = EM28XX_VMUX_SVIDEO, 1810 .vmux = TVP5150_SVIDEO, 1811 .amux = EM28XX_AMUX_LINE_IN, 1812 .gpio = default_analog, 1813 } }, 1814 }, 1815 [EM2881_BOARD_DNT_DA2_HYBRID] = { 1816 .name = "DNT DA2 Hybrid", 1817 .valid = EM28XX_BOARD_NOT_VALIDATED, 1818 .tuner_type = TUNER_XC2028, 1819 .tuner_gpio = default_tuner_gpio, 1820 .decoder = EM28XX_TVP5150, 1821 .input = { { 1822 .type = EM28XX_VMUX_TELEVISION, 1823 .vmux = TVP5150_COMPOSITE0, 1824 .amux = EM28XX_AMUX_VIDEO, 1825 .gpio = default_analog, 1826 }, { 1827 .type = EM28XX_VMUX_COMPOSITE, 1828 .vmux = TVP5150_COMPOSITE1, 1829 .amux = EM28XX_AMUX_LINE_IN, 1830 .gpio = default_analog, 1831 }, { 1832 .type = EM28XX_VMUX_SVIDEO, 1833 .vmux = TVP5150_SVIDEO, 1834 .amux = EM28XX_AMUX_LINE_IN, 1835 .gpio = default_analog, 1836 } }, 1837 }, 1838 [EM2881_BOARD_PINNACLE_HYBRID_PRO] = { 1839 .name = "Pinnacle Hybrid Pro", 1840 .tuner_type = TUNER_XC2028, 1841 .tuner_gpio = default_tuner_gpio, 1842 .decoder = EM28XX_TVP5150, 1843 .has_dvb = 1, 1844 .dvb_gpio = pinnacle_hybrid_pro_digital, 1845 .input = { { 1846 .type = EM28XX_VMUX_TELEVISION, 1847 .vmux = TVP5150_COMPOSITE0, 1848 .amux = EM28XX_AMUX_VIDEO, 1849 .gpio = pinnacle_hybrid_pro_analog, 1850 }, { 1851 .type = EM28XX_VMUX_COMPOSITE, 1852 .vmux = TVP5150_COMPOSITE1, 1853 .amux = EM28XX_AMUX_LINE_IN, 1854 .gpio = pinnacle_hybrid_pro_analog, 1855 }, { 1856 .type = EM28XX_VMUX_SVIDEO, 1857 .vmux = TVP5150_SVIDEO, 1858 .amux = EM28XX_AMUX_LINE_IN, 1859 .gpio = pinnacle_hybrid_pro_analog, 1860 } }, 1861 }, 1862 [EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = { 1863 .name = "Pinnacle Hybrid Pro (330e)", 1864 .tuner_type = TUNER_XC2028, 1865 .tuner_gpio = default_tuner_gpio, 1866 .mts_firmware = 1, 1867 .has_dvb = 1, 1868 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, 1869 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 1870 .decoder = EM28XX_TVP5150, 1871 .input = { { 1872 .type = EM28XX_VMUX_TELEVISION, 1873 .vmux = TVP5150_COMPOSITE0, 1874 .amux = EM28XX_AMUX_VIDEO, 1875 .gpio = hauppauge_wintv_hvr_900_analog, 1876 }, { 1877 .type = EM28XX_VMUX_COMPOSITE, 1878 .vmux = TVP5150_COMPOSITE1, 1879 .amux = EM28XX_AMUX_LINE_IN, 1880 .gpio = hauppauge_wintv_hvr_900_analog, 1881 }, { 1882 .type = EM28XX_VMUX_SVIDEO, 1883 .vmux = TVP5150_SVIDEO, 1884 .amux = EM28XX_AMUX_LINE_IN, 1885 .gpio = hauppauge_wintv_hvr_900_analog, 1886 } }, 1887 }, 1888 [EM2882_BOARD_KWORLD_VS_DVBT] = { 1889 .name = "Kworld VS-DVB-T 323UR", 1890 .tuner_type = TUNER_XC2028, 1891 .tuner_gpio = default_tuner_gpio, 1892 .decoder = EM28XX_TVP5150, 1893 .mts_firmware = 1, 1894 .has_dvb = 1, 1895 .dvb_gpio = kworld_330u_digital, 1896 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 1897 .ir_codes = RC_MAP_KWORLD_315U, 1898 .input = { { 1899 .type = EM28XX_VMUX_TELEVISION, 1900 .vmux = TVP5150_COMPOSITE0, 1901 .amux = EM28XX_AMUX_VIDEO, 1902 }, { 1903 .type = EM28XX_VMUX_COMPOSITE, 1904 .vmux = TVP5150_COMPOSITE1, 1905 .amux = EM28XX_AMUX_LINE_IN, 1906 }, { 1907 .type = EM28XX_VMUX_SVIDEO, 1908 .vmux = TVP5150_SVIDEO, 1909 .amux = EM28XX_AMUX_LINE_IN, 1910 } }, 1911 }, 1912 [EM2882_BOARD_TERRATEC_HYBRID_XS] = { 1913 .name = "Terratec Cinnergy Hybrid T USB XS (em2882)", 1914 .tuner_type = TUNER_XC2028, 1915 .tuner_gpio = default_tuner_gpio, 1916 .mts_firmware = 1, 1917 .decoder = EM28XX_TVP5150, 1918 .has_dvb = 1, 1919 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1920 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS, 1921 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1922 .input = { { 1923 .type = EM28XX_VMUX_TELEVISION, 1924 .vmux = TVP5150_COMPOSITE0, 1925 .amux = EM28XX_AMUX_VIDEO, 1926 .gpio = hauppauge_wintv_hvr_900_analog, 1927 }, { 1928 .type = EM28XX_VMUX_COMPOSITE, 1929 .vmux = TVP5150_COMPOSITE1, 1930 .amux = EM28XX_AMUX_LINE_IN, 1931 .gpio = hauppauge_wintv_hvr_900_analog, 1932 }, { 1933 .type = EM28XX_VMUX_SVIDEO, 1934 .vmux = TVP5150_SVIDEO, 1935 .amux = EM28XX_AMUX_LINE_IN, 1936 .gpio = hauppauge_wintv_hvr_900_analog, 1937 } }, 1938 }, 1939 [EM2882_BOARD_DIKOM_DK300] = { 1940 .name = "Dikom DK300", 1941 .tuner_type = TUNER_XC2028, 1942 .tuner_gpio = default_tuner_gpio, 1943 .decoder = EM28XX_TVP5150, 1944 .mts_firmware = 1, 1945 .has_dvb = 1, 1946 .dvb_gpio = dikom_dk300_digital, 1947 .input = { { 1948 .type = EM28XX_VMUX_TELEVISION, 1949 .vmux = TVP5150_COMPOSITE0, 1950 .amux = EM28XX_AMUX_VIDEO, 1951 .gpio = default_analog, 1952 } }, 1953 }, 1954 [EM2883_BOARD_KWORLD_HYBRID_330U] = { 1955 .name = "Kworld PlusTV HD Hybrid 330", 1956 .tuner_type = TUNER_XC2028, 1957 .tuner_gpio = default_tuner_gpio, 1958 .decoder = EM28XX_TVP5150, 1959 .mts_firmware = 1, 1960 .has_dvb = 1, 1961 .dvb_gpio = kworld_330u_digital, 1962 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1963 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1964 EM28XX_I2C_EEPROM_ON_BOARD | 1965 EM28XX_I2C_EEPROM_KEY_VALID, 1966 .input = { { 1967 .type = EM28XX_VMUX_TELEVISION, 1968 .vmux = TVP5150_COMPOSITE0, 1969 .amux = EM28XX_AMUX_VIDEO, 1970 .gpio = kworld_330u_analog, 1971 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1972 }, { 1973 .type = EM28XX_VMUX_COMPOSITE, 1974 .vmux = TVP5150_COMPOSITE1, 1975 .amux = EM28XX_AMUX_LINE_IN, 1976 .gpio = kworld_330u_analog, 1977 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1978 }, { 1979 .type = EM28XX_VMUX_SVIDEO, 1980 .vmux = TVP5150_SVIDEO, 1981 .amux = EM28XX_AMUX_LINE_IN, 1982 .gpio = kworld_330u_analog, 1983 } }, 1984 }, 1985 [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = { 1986 .name = "Compro VideoMate ForYou/Stereo", 1987 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1988 .tvaudio_addr = 0xb0, 1989 .tda9887_conf = TDA9887_PRESENT, 1990 .decoder = EM28XX_TVP5150, 1991 .adecoder = EM28XX_TVAUDIO, 1992 .mute_gpio = compro_mute_gpio, 1993 .input = { { 1994 .type = EM28XX_VMUX_TELEVISION, 1995 .vmux = TVP5150_COMPOSITE0, 1996 .amux = EM28XX_AMUX_VIDEO, 1997 .gpio = compro_unmute_tv_gpio, 1998 }, { 1999 .type = EM28XX_VMUX_SVIDEO, 2000 .vmux = TVP5150_SVIDEO, 2001 .amux = EM28XX_AMUX_LINE_IN, 2002 .gpio = compro_unmute_svid_gpio, 2003 } }, 2004 }, 2005 [EM2860_BOARD_KAIOMY_TVNPC_U2] = { 2006 .name = "Kaiomy TVnPC U2", 2007 .vchannels = 3, 2008 .tuner_type = TUNER_XC2028, 2009 .tuner_addr = 0x61, 2010 .mts_firmware = 1, 2011 .decoder = EM28XX_TVP5150, 2012 .tuner_gpio = default_tuner_gpio, 2013 .ir_codes = RC_MAP_KAIOMY, 2014 .input = { { 2015 .type = EM28XX_VMUX_TELEVISION, 2016 .vmux = TVP5150_COMPOSITE0, 2017 .amux = EM28XX_AMUX_VIDEO, 2018 2019 }, { 2020 .type = EM28XX_VMUX_COMPOSITE, 2021 .vmux = TVP5150_COMPOSITE1, 2022 .amux = EM28XX_AMUX_LINE_IN, 2023 }, { 2024 .type = EM28XX_VMUX_SVIDEO, 2025 .vmux = TVP5150_SVIDEO, 2026 .amux = EM28XX_AMUX_LINE_IN, 2027 } }, 2028 .radio = { 2029 .type = EM28XX_RADIO, 2030 .amux = EM28XX_AMUX_LINE_IN, 2031 } 2032 }, 2033 [EM2860_BOARD_EASYCAP] = { 2034 .name = "Easy Cap Capture DC-60", 2035 .vchannels = 2, 2036 .tuner_type = TUNER_ABSENT, 2037 .decoder = EM28XX_SAA711X, 2038 .input = { { 2039 .type = EM28XX_VMUX_COMPOSITE, 2040 .vmux = SAA7115_COMPOSITE0, 2041 .amux = EM28XX_AMUX_LINE_IN, 2042 }, { 2043 .type = EM28XX_VMUX_SVIDEO, 2044 .vmux = SAA7115_SVIDEO3, 2045 .amux = EM28XX_AMUX_LINE_IN, 2046 } }, 2047 }, 2048 [EM2820_BOARD_IODATA_GVMVP_SZ] = { 2049 .name = "IO-DATA GV-MVP/SZ", 2050 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 2051 .tuner_gpio = default_tuner_gpio, 2052 .tda9887_conf = TDA9887_PRESENT, 2053 .decoder = EM28XX_TVP5150, 2054 .input = { { 2055 .type = EM28XX_VMUX_TELEVISION, 2056 .vmux = TVP5150_COMPOSITE0, 2057 .amux = EM28XX_AMUX_VIDEO, 2058 }, { /* Composite has not been tested yet */ 2059 .type = EM28XX_VMUX_COMPOSITE, 2060 .vmux = TVP5150_COMPOSITE1, 2061 .amux = EM28XX_AMUX_VIDEO, 2062 }, { /* S-video has not been tested yet */ 2063 .type = EM28XX_VMUX_SVIDEO, 2064 .vmux = TVP5150_SVIDEO, 2065 .amux = EM28XX_AMUX_VIDEO, 2066 } }, 2067 }, 2068 [EM2860_BOARD_TERRATEC_GRABBY] = { 2069 .name = "Terratec Grabby", 2070 .vchannels = 2, 2071 .tuner_type = TUNER_ABSENT, 2072 .decoder = EM28XX_SAA711X, 2073 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 2074 .input = { { 2075 .type = EM28XX_VMUX_COMPOSITE, 2076 .vmux = SAA7115_COMPOSITE0, 2077 .amux = EM28XX_AMUX_LINE_IN, 2078 }, { 2079 .type = EM28XX_VMUX_SVIDEO, 2080 .vmux = SAA7115_SVIDEO3, 2081 .amux = EM28XX_AMUX_LINE_IN, 2082 } }, 2083 .buttons = std_snapshot_button, 2084 .leds = terratec_grabby_leds, 2085 }, 2086 [EM2860_BOARD_TERRATEC_AV350] = { 2087 .name = "Terratec AV350", 2088 .vchannels = 2, 2089 .tuner_type = TUNER_ABSENT, 2090 .decoder = EM28XX_TVP5150, 2091 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 2092 .mute_gpio = terratec_av350_mute_gpio, 2093 .input = { { 2094 .type = EM28XX_VMUX_COMPOSITE, 2095 .vmux = TVP5150_COMPOSITE1, 2096 .amux = EM28XX_AUDIO_SRC_LINE, 2097 .gpio = terratec_av350_unmute_gpio, 2098 2099 }, { 2100 .type = EM28XX_VMUX_SVIDEO, 2101 .vmux = TVP5150_SVIDEO, 2102 .amux = EM28XX_AUDIO_SRC_LINE, 2103 .gpio = terratec_av350_unmute_gpio, 2104 } }, 2105 }, 2106 2107 [EM2860_BOARD_ELGATO_VIDEO_CAPTURE] = { 2108 .name = "Elgato Video Capture", 2109 .decoder = EM28XX_SAA711X, 2110 .tuner_type = TUNER_ABSENT, /* Capture only device */ 2111 .input = { { 2112 .type = EM28XX_VMUX_COMPOSITE, 2113 .vmux = SAA7115_COMPOSITE0, 2114 .amux = EM28XX_AMUX_LINE_IN, 2115 }, { 2116 .type = EM28XX_VMUX_SVIDEO, 2117 .vmux = SAA7115_SVIDEO3, 2118 .amux = EM28XX_AMUX_LINE_IN, 2119 } }, 2120 }, 2121 2122 [EM2882_BOARD_EVGA_INDTUBE] = { 2123 .name = "Evga inDtube", 2124 .tuner_type = TUNER_XC2028, 2125 .tuner_gpio = default_tuner_gpio, 2126 .decoder = EM28XX_TVP5150, 2127 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 2128 .mts_firmware = 1, 2129 .has_dvb = 1, 2130 .dvb_gpio = evga_indtube_digital, 2131 .ir_codes = RC_MAP_EVGA_INDTUBE, 2132 .input = { { 2133 .type = EM28XX_VMUX_TELEVISION, 2134 .vmux = TVP5150_COMPOSITE0, 2135 .amux = EM28XX_AMUX_VIDEO, 2136 .gpio = evga_indtube_analog, 2137 }, { 2138 .type = EM28XX_VMUX_COMPOSITE, 2139 .vmux = TVP5150_COMPOSITE1, 2140 .amux = EM28XX_AMUX_LINE_IN, 2141 .gpio = evga_indtube_analog, 2142 }, { 2143 .type = EM28XX_VMUX_SVIDEO, 2144 .vmux = TVP5150_SVIDEO, 2145 .amux = EM28XX_AMUX_LINE_IN, 2146 .gpio = evga_indtube_analog, 2147 } }, 2148 }, 2149 /* eb1a:2868 Empia EM2870 + Philips CU1216L NIM (Philips TDA10023 + 2150 Infineon TUA6034) */ 2151 [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = { 2152 .name = "Reddo DVB-C USB TV Box", 2153 .tuner_type = TUNER_ABSENT, 2154 .tuner_gpio = reddo_dvb_c_usb_box, 2155 .has_dvb = 1, 2156 }, 2157 /* 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold 2158 * initially as the KWorld PlusTV 340U, then as the UB435-Q. 2159 * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 */ 2160 [EM2870_BOARD_KWORLD_A340] = { 2161 .name = "KWorld PlusTV 340U or UB435-Q (ATSC)", 2162 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */ 2163 .has_dvb = 1, 2164 .dvb_gpio = kworld_a340_digital, 2165 .tuner_gpio = default_tuner_gpio, 2166 }, 2167 /* 2013:024f PCTV nanoStick T2 290e. 2168 * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 */ 2169 [EM28174_BOARD_PCTV_290E] = { 2170 .name = "PCTV nanoStick T2 290e", 2171 .def_i2c_bus = 1, 2172 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ, 2173 .tuner_type = TUNER_ABSENT, 2174 .tuner_gpio = pctv_290e, 2175 .has_dvb = 1, 2176 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2177 }, 2178 /* 2013:024f PCTV DVB-S2 Stick 460e 2179 * Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293 */ 2180 [EM28174_BOARD_PCTV_460E] = { 2181 .def_i2c_bus = 1, 2182 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, 2183 .name = "PCTV DVB-S2 Stick (460e)", 2184 .tuner_type = TUNER_ABSENT, 2185 .tuner_gpio = pctv_460e, 2186 .has_dvb = 1, 2187 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2188 }, 2189 /* eb1a:5006 Honestech VIDBOX NW03 2190 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner */ 2191 [EM2860_BOARD_HT_VIDBOX_NW03] = { 2192 .name = "Honestech Vidbox NW03", 2193 .tuner_type = TUNER_ABSENT, 2194 .decoder = EM28XX_SAA711X, 2195 .input = { { 2196 .type = EM28XX_VMUX_COMPOSITE, 2197 .vmux = SAA7115_COMPOSITE0, 2198 .amux = EM28XX_AMUX_LINE_IN, 2199 }, { 2200 .type = EM28XX_VMUX_SVIDEO, 2201 .vmux = SAA7115_SVIDEO3, /* S-VIDEO needs confirming */ 2202 .amux = EM28XX_AMUX_LINE_IN, 2203 } }, 2204 }, 2205 /* 1b80:e425 MaxMedia UB425-TC 2206 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 */ 2207 [EM2874_BOARD_MAXMEDIA_UB425_TC] = { 2208 .name = "MaxMedia UB425-TC", 2209 .tuner_type = TUNER_ABSENT, 2210 .tuner_gpio = maxmedia_ub425_tc, 2211 .has_dvb = 1, 2212 .ir_codes = RC_MAP_REDDO, 2213 .def_i2c_bus = 1, 2214 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2215 EM28XX_I2C_FREQ_400_KHZ, 2216 }, 2217 /* 2304:0242 PCTV QuatroStick (510e) 2218 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */ 2219 [EM2884_BOARD_PCTV_510E] = { 2220 .name = "PCTV QuatroStick (510e)", 2221 .tuner_type = TUNER_ABSENT, 2222 .tuner_gpio = pctv_510e, 2223 .has_dvb = 1, 2224 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2225 .def_i2c_bus = 1, 2226 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2227 EM28XX_I2C_FREQ_400_KHZ, 2228 }, 2229 /* 2013:0251 PCTV QuatroStick nano (520e) 2230 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */ 2231 [EM2884_BOARD_PCTV_520E] = { 2232 .name = "PCTV QuatroStick nano (520e)", 2233 .tuner_type = TUNER_ABSENT, 2234 .tuner_gpio = pctv_520e, 2235 .has_dvb = 1, 2236 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2237 .def_i2c_bus = 1, 2238 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2239 EM28XX_I2C_FREQ_400_KHZ, 2240 }, 2241 [EM2884_BOARD_TERRATEC_HTC_USB_XS] = { 2242 .name = "Terratec Cinergy HTC USB XS", 2243 .has_dvb = 1, 2244 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, 2245 .tuner_type = TUNER_ABSENT, 2246 .def_i2c_bus = 1, 2247 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2248 EM28XX_I2C_FREQ_400_KHZ, 2249 }, 2250 /* 1b80:e1cc Delock 61959 2251 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 2252 * mostly the same as MaxMedia UB-425-TC but different remote */ 2253 [EM2874_BOARD_DELOCK_61959] = { 2254 .name = "Delock 61959", 2255 .tuner_type = TUNER_ABSENT, 2256 .tuner_gpio = maxmedia_ub425_tc, 2257 .has_dvb = 1, 2258 .ir_codes = RC_MAP_DELOCK_61959, 2259 .def_i2c_bus = 1, 2260 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2261 EM28XX_I2C_FREQ_400_KHZ, 2262 }, 2263 /* 2264 * 1b80:e346 KWorld USB ATSC TV Stick UB435-Q V2 2265 * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2 2266 */ 2267 [EM2874_BOARD_KWORLD_UB435Q_V2] = { 2268 .name = "KWorld USB ATSC TV Stick UB435-Q V2", 2269 .tuner_type = TUNER_ABSENT, 2270 .has_dvb = 1, 2271 .dvb_gpio = kworld_a340_digital, 2272 .tuner_gpio = default_tuner_gpio, 2273 .def_i2c_bus = 1, 2274 }, 2275 /* 2276 * 1b80:e34c KWorld USB ATSC TV Stick UB435-Q V3 2277 * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2 2278 */ 2279 [EM2874_BOARD_KWORLD_UB435Q_V3] = { 2280 .name = "KWorld USB ATSC TV Stick UB435-Q V3", 2281 .tuner_type = TUNER_ABSENT, 2282 .has_dvb = 1, 2283 .tuner_gpio = kworld_ub435q_v3_digital, 2284 .def_i2c_bus = 1, 2285 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2286 EM28XX_I2C_FREQ_100_KHZ, 2287 .leds = kworld_ub435q_v3_leds, 2288 }, 2289 [EM2874_BOARD_PCTV_HD_MINI_80E] = { 2290 .name = "Pinnacle PCTV HD Mini", 2291 .tuner_type = TUNER_ABSENT, 2292 .has_dvb = 1, 2293 .dvb_gpio = em2874_pctv_80e_digital, 2294 .decoder = EM28XX_NODECODER, 2295 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2296 .leds = pctv_80e_leds, 2297 }, 2298 /* 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam 2299 * Empia EM2765 + OmniVision OV2640 */ 2300 [EM2765_BOARD_SPEEDLINK_VAD_LAPLACE] = { 2301 .name = "SpeedLink Vicious And Devine Laplace webcam", 2302 .xclk = EM28XX_XCLK_FREQUENCY_24MHZ, 2303 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2304 EM28XX_I2C_FREQ_100_KHZ, 2305 .def_i2c_bus = 1, 2306 .tuner_type = TUNER_ABSENT, 2307 .is_webcam = 1, 2308 .input = { { 2309 .type = EM28XX_VMUX_COMPOSITE, 2310 .amux = EM28XX_AMUX_VIDEO, 2311 .gpio = speedlink_vad_laplace_reg_seq, 2312 } }, 2313 .buttons = speedlink_vad_laplace_buttons, 2314 .leds = speedlink_vad_laplace_leds, 2315 }, 2316 /* 2013:0258 PCTV DVB-S2 Stick (461e) 2317 * Empia EM28178, Montage M88DS3103, Montage M88TS2022, Allegro A8293 */ 2318 [EM28178_BOARD_PCTV_461E] = { 2319 .def_i2c_bus = 1, 2320 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, 2321 .name = "PCTV DVB-S2 Stick (461e)", 2322 .tuner_type = TUNER_ABSENT, 2323 .tuner_gpio = pctv_461e, 2324 .has_dvb = 1, 2325 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2326 }, 2327 /* 2013:025f PCTV tripleStick (292e). 2328 * Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2157 */ 2329 [EM28178_BOARD_PCTV_292E] = { 2330 .name = "PCTV tripleStick (292e)", 2331 .def_i2c_bus = 1, 2332 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, 2333 .tuner_type = TUNER_ABSENT, 2334 .tuner_gpio = pctv_292e, 2335 .has_dvb = 1, 2336 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2337 }, 2338 [EM2861_BOARD_LEADTEK_VC100] = { 2339 .name = "Leadtek VC100", 2340 .tuner_type = TUNER_ABSENT, /* Capture only device */ 2341 .decoder = EM28XX_TVP5150, 2342 .input = { { 2343 .type = EM28XX_VMUX_COMPOSITE, 2344 .vmux = TVP5150_COMPOSITE1, 2345 .amux = EM28XX_AMUX_LINE_IN, 2346 }, { 2347 .type = EM28XX_VMUX_SVIDEO, 2348 .vmux = TVP5150_SVIDEO, 2349 .amux = EM28XX_AMUX_LINE_IN, 2350 } }, 2351 }, 2352 /* eb1a:8179 Terratec Cinergy T2 Stick HD. 2353 * Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2146 */ 2354 [EM28178_BOARD_TERRATEC_T2_STICK_HD] = { 2355 .name = "Terratec Cinergy T2 Stick HD", 2356 .def_i2c_bus = 1, 2357 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, 2358 .tuner_type = TUNER_ABSENT, 2359 .tuner_gpio = terratec_t2_stick_hd, 2360 .has_dvb = 1, 2361 .ir_codes = RC_MAP_TERRATEC_SLIM_2, 2362 }, 2363 2364 /* 2365 * 3275:0085 PLEX PX-BCUD. 2366 * Empia EM28178, TOSHIBA TC90532XBG, Sharp QM1D1C0042 2367 */ 2368 [EM28178_BOARD_PLEX_PX_BCUD] = { 2369 .name = "PLEX PX-BCUD", 2370 .xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ, 2371 .def_i2c_bus = 1, 2372 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 2373 .tuner_type = TUNER_ABSENT, 2374 .tuner_gpio = plex_px_bcud, 2375 .has_dvb = 1, 2376 }, 2377 /* 2378 * 2040:0265 Hauppauge WinTV-dualHD (DVB version). 2379 * Empia EM28274, 2x Silicon Labs Si2168, 2x Silicon Labs Si2157 2380 */ 2381 [EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB] = { 2382 .name = "Hauppauge WinTV-dualHD DVB", 2383 .def_i2c_bus = 1, 2384 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2385 EM28XX_I2C_FREQ_400_KHZ, 2386 .tuner_type = TUNER_ABSENT, 2387 .tuner_gpio = hauppauge_dualhd_dvb, 2388 .has_dvb = 1, 2389 .ir_codes = RC_MAP_HAUPPAUGE, 2390 .leds = hauppauge_dualhd_leds, 2391 }, 2392 }; 2393 EXPORT_SYMBOL_GPL(em28xx_boards); 2394 2395 static const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); 2396 2397 /* table of devices that work with this driver */ 2398 struct usb_device_id em28xx_id_table[] = { 2399 { USB_DEVICE(0xeb1a, 0x2750), 2400 .driver_info = EM2750_BOARD_UNKNOWN }, 2401 { USB_DEVICE(0xeb1a, 0x2751), 2402 .driver_info = EM2750_BOARD_UNKNOWN }, 2403 { USB_DEVICE(0xeb1a, 0x2800), 2404 .driver_info = EM2800_BOARD_UNKNOWN }, 2405 { USB_DEVICE(0xeb1a, 0x2710), 2406 .driver_info = EM2820_BOARD_UNKNOWN }, 2407 { USB_DEVICE(0xeb1a, 0x2820), 2408 .driver_info = EM2820_BOARD_UNKNOWN }, 2409 { USB_DEVICE(0xeb1a, 0x2821), 2410 .driver_info = EM2820_BOARD_UNKNOWN }, 2411 { USB_DEVICE(0xeb1a, 0x2860), 2412 .driver_info = EM2820_BOARD_UNKNOWN }, 2413 { USB_DEVICE(0xeb1a, 0x2861), 2414 .driver_info = EM2820_BOARD_UNKNOWN }, 2415 { USB_DEVICE(0xeb1a, 0x2862), 2416 .driver_info = EM2820_BOARD_UNKNOWN }, 2417 { USB_DEVICE(0xeb1a, 0x2863), 2418 .driver_info = EM2820_BOARD_UNKNOWN }, 2419 { USB_DEVICE(0xeb1a, 0x2870), 2420 .driver_info = EM2820_BOARD_UNKNOWN }, 2421 { USB_DEVICE(0xeb1a, 0x2881), 2422 .driver_info = EM2820_BOARD_UNKNOWN }, 2423 { USB_DEVICE(0xeb1a, 0x2883), 2424 .driver_info = EM2820_BOARD_UNKNOWN }, 2425 { USB_DEVICE(0xeb1a, 0x2868), 2426 .driver_info = EM2820_BOARD_UNKNOWN }, 2427 { USB_DEVICE(0xeb1a, 0x2875), 2428 .driver_info = EM2820_BOARD_UNKNOWN }, 2429 { USB_DEVICE(0xeb1a, 0x2885), /* MSI Digivox Trio */ 2430 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2431 { USB_DEVICE(0xeb1a, 0xe300), 2432 .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U }, 2433 { USB_DEVICE(0xeb1a, 0xe303), 2434 .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 }, 2435 { USB_DEVICE(0xeb1a, 0xe305), 2436 .driver_info = EM2880_BOARD_KWORLD_DVB_305U }, 2437 { USB_DEVICE(0xeb1a, 0xe310), 2438 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD }, 2439 { USB_DEVICE(0xeb1a, 0xa313), 2440 .driver_info = EM2882_BOARD_KWORLD_ATSC_315U }, 2441 { USB_DEVICE(0xeb1a, 0xa316), 2442 .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U }, 2443 { USB_DEVICE(0xeb1a, 0xe320), 2444 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II }, 2445 { USB_DEVICE(0xeb1a, 0xe323), 2446 .driver_info = EM2882_BOARD_KWORLD_VS_DVBT }, 2447 { USB_DEVICE(0xeb1a, 0xe350), 2448 .driver_info = EM2870_BOARD_KWORLD_350U }, 2449 { USB_DEVICE(0xeb1a, 0xe355), 2450 .driver_info = EM2870_BOARD_KWORLD_355U }, 2451 { USB_DEVICE(0xeb1a, 0x2801), 2452 .driver_info = EM2800_BOARD_GRABBEEX_USB2800 }, 2453 { USB_DEVICE(0xeb1a, 0xe357), 2454 .driver_info = EM2870_BOARD_KWORLD_355U }, 2455 { USB_DEVICE(0xeb1a, 0xe359), 2456 .driver_info = EM2870_BOARD_KWORLD_355U }, 2457 { USB_DEVICE(0x1b80, 0xe302), 2458 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */ 2459 { USB_DEVICE(0x1b80, 0xe304), 2460 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kworld DVD Maker 2 */ 2461 { USB_DEVICE(0x0ccd, 0x0036), 2462 .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 }, 2463 { USB_DEVICE(0x0ccd, 0x004c), 2464 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR }, 2465 { USB_DEVICE(0x0ccd, 0x004f), 2466 .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS }, 2467 { USB_DEVICE(0x0ccd, 0x005e), 2468 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, 2469 { USB_DEVICE(0x0ccd, 0x0042), 2470 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, 2471 { USB_DEVICE(0x0ccd, 0x0043), 2472 .driver_info = EM2870_BOARD_TERRATEC_XS_MT2060 }, 2473 { USB_DEVICE(0x0ccd, 0x008e), /* Cinergy HTC USB XS Rev. 1 */ 2474 .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS }, 2475 { USB_DEVICE(0x0ccd, 0x00ac), /* Cinergy HTC USB XS Rev. 2 */ 2476 .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS }, 2477 { USB_DEVICE(0x0ccd, 0x10a2), /* H5 Rev. 1 */ 2478 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2479 { USB_DEVICE(0x0ccd, 0x10ad), /* H5 Rev. 2 */ 2480 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2481 { USB_DEVICE(0x0ccd, 0x10b6), /* H5 Rev. 3 */ 2482 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2483 { USB_DEVICE(0x0ccd, 0x0084), 2484 .driver_info = EM2860_BOARD_TERRATEC_AV350 }, 2485 { USB_DEVICE(0x0ccd, 0x0096), 2486 .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, 2487 { USB_DEVICE(0x0ccd, 0x10AF), 2488 .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, 2489 { USB_DEVICE(0x0ccd, 0x00b2), 2490 .driver_info = EM2884_BOARD_CINERGY_HTC_STICK }, 2491 { USB_DEVICE(0x0fd9, 0x0018), 2492 .driver_info = EM2884_BOARD_ELGATO_EYETV_HYBRID_2008 }, 2493 { USB_DEVICE(0x0fd9, 0x0033), 2494 .driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE }, 2495 { USB_DEVICE(0x185b, 0x2870), 2496 .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE }, 2497 { USB_DEVICE(0x185b, 0x2041), 2498 .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU }, 2499 { USB_DEVICE(0x2040, 0x4200), 2500 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, 2501 { USB_DEVICE(0x2040, 0x4201), 2502 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, 2503 { USB_DEVICE(0x2040, 0x6500), 2504 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 }, 2505 { USB_DEVICE(0x2040, 0x6502), 2506 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 }, 2507 { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */ 2508 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2509 { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */ 2510 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2511 { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */ 2512 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2513 { USB_DEVICE(0x2040, 0x651f), 2514 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 }, 2515 { USB_DEVICE(0x2040, 0x0265), 2516 .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB }, 2517 { USB_DEVICE(0x0438, 0xb002), 2518 .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 }, 2519 { USB_DEVICE(0x2001, 0xf112), 2520 .driver_info = EM2820_BOARD_DLINK_USB_TV }, 2521 { USB_DEVICE(0x2304, 0x0207), 2522 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2523 { USB_DEVICE(0x2304, 0x0208), 2524 .driver_info = EM2820_BOARD_PINNACLE_USB_2 }, 2525 { USB_DEVICE(0x2304, 0x021a), 2526 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2527 { USB_DEVICE(0x2304, 0x0226), 2528 .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E }, 2529 { USB_DEVICE(0x2304, 0x0227), 2530 .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO }, 2531 { USB_DEVICE(0x2304, 0x023f), 2532 .driver_info = EM2874_BOARD_PCTV_HD_MINI_80E }, 2533 { USB_DEVICE(0x0413, 0x6023), 2534 .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII }, 2535 { USB_DEVICE(0x093b, 0xa003), 2536 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2537 { USB_DEVICE(0x093b, 0xa005), 2538 .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U }, 2539 { USB_DEVICE(0x04bb, 0x0515), 2540 .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ }, 2541 { USB_DEVICE(0xeb1a, 0x50a6), 2542 .driver_info = EM2860_BOARD_GADMEI_UTV330 }, 2543 { USB_DEVICE(0x1b80, 0xa340), 2544 .driver_info = EM2870_BOARD_KWORLD_A340 }, 2545 { USB_DEVICE(0x1b80, 0xe346), 2546 .driver_info = EM2874_BOARD_KWORLD_UB435Q_V2 }, 2547 { USB_DEVICE(0x1b80, 0xe34c), 2548 .driver_info = EM2874_BOARD_KWORLD_UB435Q_V3 }, 2549 { USB_DEVICE(0x2013, 0x024f), 2550 .driver_info = EM28174_BOARD_PCTV_290E }, 2551 { USB_DEVICE(0x2013, 0x024c), 2552 .driver_info = EM28174_BOARD_PCTV_460E }, 2553 { USB_DEVICE(0x2040, 0x1605), 2554 .driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C }, 2555 { USB_DEVICE(0x1b80, 0xe755), 2556 .driver_info = EM2884_BOARD_C3TECH_DIGITAL_DUO }, 2557 { USB_DEVICE(0xeb1a, 0x5006), 2558 .driver_info = EM2860_BOARD_HT_VIDBOX_NW03 }, 2559 { USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */ 2560 .driver_info = EM2860_BOARD_EASYCAP }, 2561 { USB_DEVICE(0x1b80, 0xe425), 2562 .driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC }, 2563 { USB_DEVICE(0x2304, 0x0242), 2564 .driver_info = EM2884_BOARD_PCTV_510E }, 2565 { USB_DEVICE(0x2013, 0x0251), 2566 .driver_info = EM2884_BOARD_PCTV_520E }, 2567 { USB_DEVICE(0x1b80, 0xe1cc), 2568 .driver_info = EM2874_BOARD_DELOCK_61959 }, 2569 { USB_DEVICE(0x1ae7, 0x9003), 2570 .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE }, 2571 { USB_DEVICE(0x1ae7, 0x9004), 2572 .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE }, 2573 { USB_DEVICE(0x2013, 0x0258), 2574 .driver_info = EM28178_BOARD_PCTV_461E }, 2575 { USB_DEVICE(0x2013, 0x025f), 2576 .driver_info = EM28178_BOARD_PCTV_292E }, 2577 { USB_DEVICE(0x2040, 0x0264), /* Hauppauge WinTV-soloHD */ 2578 .driver_info = EM28178_BOARD_PCTV_292E }, 2579 { USB_DEVICE(0x0413, 0x6f07), 2580 .driver_info = EM2861_BOARD_LEADTEK_VC100 }, 2581 { USB_DEVICE(0xeb1a, 0x8179), 2582 .driver_info = EM28178_BOARD_TERRATEC_T2_STICK_HD }, 2583 { USB_DEVICE(0x3275, 0x0085), 2584 .driver_info = EM28178_BOARD_PLEX_PX_BCUD }, 2585 { }, 2586 }; 2587 MODULE_DEVICE_TABLE(usb, em28xx_id_table); 2588 2589 /* 2590 * EEPROM hash table for devices with generic USB IDs 2591 */ 2592 static struct em28xx_hash_table em28xx_eeprom_hash[] = { 2593 /* P/N: SA 60002070465 Tuner: TVF7533-MF */ 2594 {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF}, 2595 {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF}, 2596 {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028}, 2597 {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028}, 2598 {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028}, 2599 {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028}, 2600 {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT}, 2601 {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028}, 2602 }; 2603 2604 /* I2C devicelist hash table for devices with generic USB IDs */ 2605 static struct em28xx_hash_table em28xx_i2c_hash[] = { 2606 {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC}, 2607 {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC}, 2608 {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT}, 2609 {0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT}, 2610 {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC}, 2611 {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF}, 2612 {0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT}, 2613 }; 2614 2615 /* NOTE: introduce a separate hash table for devices with 16 bit eeproms */ 2616 2617 int em28xx_tuner_callback(void *ptr, int component, int command, int arg) 2618 { 2619 struct em28xx_i2c_bus *i2c_bus = ptr; 2620 struct em28xx *dev = i2c_bus->dev; 2621 int rc = 0; 2622 2623 if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000) 2624 return 0; 2625 2626 if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET) 2627 return 0; 2628 2629 rc = em28xx_gpio_set(dev, dev->board.tuner_gpio); 2630 2631 return rc; 2632 } 2633 EXPORT_SYMBOL_GPL(em28xx_tuner_callback); 2634 2635 static inline void em28xx_set_model(struct em28xx *dev) 2636 { 2637 dev->board = em28xx_boards[dev->model]; 2638 2639 /* Those are the default values for the majority of boards 2640 Use those values if not specified otherwise at boards entry 2641 */ 2642 if (!dev->board.xclk) 2643 dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE | 2644 EM28XX_XCLK_FREQUENCY_12MHZ; 2645 2646 if (!dev->board.i2c_speed) 2647 dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2648 EM28XX_I2C_FREQ_100_KHZ; 2649 2650 /* Should be initialized early, for I2C to work */ 2651 dev->def_i2c_bus = dev->board.def_i2c_bus; 2652 } 2653 2654 /* Wait until AC97_RESET reports the expected value reliably before proceeding. 2655 * We also check that two unrelated registers accesses don't return the same 2656 * value to avoid premature return. 2657 * This procedure helps ensuring AC97 register accesses are reliable. 2658 */ 2659 static int em28xx_wait_until_ac97_features_equals(struct em28xx *dev, 2660 int expected_feat) 2661 { 2662 unsigned long timeout = jiffies + msecs_to_jiffies(2000); 2663 int feat, powerdown; 2664 2665 while (time_is_after_jiffies(timeout)) { 2666 feat = em28xx_read_ac97(dev, AC97_RESET); 2667 if (feat < 0) 2668 return feat; 2669 2670 powerdown = em28xx_read_ac97(dev, AC97_POWERDOWN); 2671 if (powerdown < 0) 2672 return powerdown; 2673 2674 if (feat == expected_feat && feat != powerdown) 2675 return 0; 2676 2677 msleep(50); 2678 } 2679 2680 dev_warn(&dev->intf->dev, "AC97 registers access is not reliable !\n"); 2681 return -ETIMEDOUT; 2682 } 2683 2684 /* Since em28xx_pre_card_setup() requires a proper dev->model, 2685 * this won't work for boards with generic PCI IDs 2686 */ 2687 static void em28xx_pre_card_setup(struct em28xx *dev) 2688 { 2689 /* Set the initial XCLK and I2C clock values based on the board 2690 definition */ 2691 em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f); 2692 if (!dev->board.is_em2800) 2693 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed); 2694 msleep(50); 2695 2696 /* request some modules */ 2697 switch (dev->model) { 2698 case EM2861_BOARD_PLEXTOR_PX_TV100U: 2699 /* Sets the msp34xx I2S speed */ 2700 dev->i2s_speed = 2048000; 2701 break; 2702 case EM2861_BOARD_KWORLD_PVRTV_300U: 2703 case EM2880_BOARD_KWORLD_DVB_305U: 2704 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x6d); 2705 msleep(10); 2706 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x7d); 2707 msleep(10); 2708 break; 2709 case EM2870_BOARD_COMPRO_VIDEOMATE: 2710 /* TODO: someone can do some cleanup here... 2711 not everything's needed */ 2712 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); 2713 msleep(10); 2714 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01); 2715 msleep(10); 2716 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 2717 mdelay(70); 2718 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc); 2719 mdelay(70); 2720 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xdc); 2721 mdelay(70); 2722 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc); 2723 mdelay(70); 2724 break; 2725 case EM2870_BOARD_TERRATEC_XS_MT2060: 2726 /* this device needs some gpio writes to get the DVB-T 2727 demod work */ 2728 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2729 mdelay(70); 2730 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde); 2731 mdelay(70); 2732 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2733 mdelay(70); 2734 break; 2735 case EM2870_BOARD_PINNACLE_PCTV_DVB: 2736 /* this device needs some gpio writes to get the 2737 DVB-T demod work */ 2738 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2739 mdelay(70); 2740 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde); 2741 mdelay(70); 2742 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2743 mdelay(70); 2744 break; 2745 case EM2820_BOARD_GADMEI_UTV310: 2746 case EM2820_BOARD_MSI_VOX_USB_2: 2747 /* enables audio for that devices */ 2748 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 2749 break; 2750 2751 case EM2882_BOARD_KWORLD_ATSC_315U: 2752 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); 2753 msleep(10); 2754 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2755 msleep(10); 2756 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); 2757 msleep(10); 2758 em28xx_write_reg(dev, EM2880_R04_GPO, 0x08); 2759 msleep(10); 2760 break; 2761 2762 case EM2860_BOARD_KAIOMY_TVNPC_U2: 2763 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1); 2764 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1); 2765 em28xx_write_regs(dev, 0x0d, "\x42", 1); 2766 em28xx_write_regs(dev, 0x08, "\xfd", 1); 2767 msleep(10); 2768 em28xx_write_regs(dev, 0x08, "\xff", 1); 2769 msleep(10); 2770 em28xx_write_regs(dev, 0x08, "\x7f", 1); 2771 msleep(10); 2772 em28xx_write_regs(dev, 0x08, "\x6b", 1); 2773 2774 break; 2775 case EM2860_BOARD_EASYCAP: 2776 em28xx_write_regs(dev, 0x08, "\xf8", 1); 2777 break; 2778 2779 case EM2820_BOARD_IODATA_GVMVP_SZ: 2780 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); 2781 msleep(70); 2782 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7); 2783 msleep(10); 2784 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2785 msleep(70); 2786 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 2787 msleep(70); 2788 break; 2789 2790 case EM2860_BOARD_TERRATEC_GRABBY: 2791 /* HACK?: Ensure AC97 register reading is reliable before 2792 * proceeding. In practice, this will wait about 1.6 seconds. 2793 */ 2794 em28xx_wait_until_ac97_features_equals(dev, 0x6a90); 2795 break; 2796 } 2797 2798 em28xx_gpio_set(dev, dev->board.tuner_gpio); 2799 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 2800 2801 /* Unlock device */ 2802 em28xx_set_mode(dev, EM28XX_SUSPEND); 2803 } 2804 2805 static int em28xx_hint_board(struct em28xx *dev) 2806 { 2807 int i; 2808 2809 if (dev->board.is_webcam) { 2810 if (dev->em28xx_sensor == EM28XX_MT9V011) { 2811 dev->model = EM2820_BOARD_SILVERCREST_WEBCAM; 2812 } else if (dev->em28xx_sensor == EM28XX_MT9M001 || 2813 dev->em28xx_sensor == EM28XX_MT9M111) { 2814 dev->model = EM2750_BOARD_UNKNOWN; 2815 } 2816 /* FIXME: IMPROVE ! */ 2817 2818 return 0; 2819 } 2820 2821 /* HINT method: EEPROM 2822 * 2823 * This method works only for boards with eeprom. 2824 * Uses a hash of all eeprom bytes. The hash should be 2825 * unique for a vendor/tuner pair. 2826 * There are a high chance that tuners for different 2827 * video standards produce different hashes. 2828 */ 2829 for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) { 2830 if (dev->hash == em28xx_eeprom_hash[i].hash) { 2831 dev->model = em28xx_eeprom_hash[i].model; 2832 dev->tuner_type = em28xx_eeprom_hash[i].tuner; 2833 2834 dev_err(&dev->intf->dev, 2835 "Your board has no unique USB ID.\n" 2836 "A hint were successfully done, based on eeprom hash.\n" 2837 "This method is not 100%% failproof.\n" 2838 "If the board were missdetected, please email this log to:\n" 2839 "\tV4L Mailing List <linux-media@vger.kernel.org>\n" 2840 "Board detected as %s\n", 2841 em28xx_boards[dev->model].name); 2842 2843 return 0; 2844 } 2845 } 2846 2847 /* HINT method: I2C attached devices 2848 * 2849 * This method works for all boards. 2850 * Uses a hash of i2c scanned devices. 2851 * Devices with the same i2c attached chips will 2852 * be considered equal. 2853 * This method is less precise than the eeprom one. 2854 */ 2855 2856 /* user did not request i2c scanning => do it now */ 2857 if (!dev->i2c_hash) 2858 em28xx_do_i2c_scan(dev, dev->def_i2c_bus); 2859 2860 for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) { 2861 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) { 2862 dev->model = em28xx_i2c_hash[i].model; 2863 dev->tuner_type = em28xx_i2c_hash[i].tuner; 2864 dev_err(&dev->intf->dev, 2865 "Your board has no unique USB ID.\n" 2866 "A hint were successfully done, based on i2c devicelist hash.\n" 2867 "This method is not 100%% failproof.\n" 2868 "If the board were missdetected, please email this log to:\n" 2869 "\tV4L Mailing List <linux-media@vger.kernel.org>\n" 2870 "Board detected as %s\n", 2871 em28xx_boards[dev->model].name); 2872 2873 return 0; 2874 } 2875 } 2876 2877 dev_err(&dev->intf->dev, 2878 "Your board has no unique USB ID and thus need a hint to be detected.\n" 2879 "You may try to use card=<n> insmod option to workaround that.\n" 2880 "Please send an email with this log to:\n" 2881 "\tV4L Mailing List <linux-media@vger.kernel.org>\n" 2882 "Board eeprom hash is 0x%08lx\n" 2883 "Board i2c devicelist hash is 0x%08lx\n", 2884 dev->hash, dev->i2c_hash); 2885 2886 dev_err(&dev->intf->dev, 2887 "Here is a list of valid choices for the card=<n> insmod option:\n"); 2888 for (i = 0; i < em28xx_bcount; i++) { 2889 dev_err(&dev->intf->dev, 2890 " card=%d -> %s\n", i, em28xx_boards[i].name); 2891 } 2892 return -1; 2893 } 2894 2895 static void em28xx_card_setup(struct em28xx *dev) 2896 { 2897 /* 2898 * If the device can be a webcam, seek for a sensor. 2899 * If sensor is not found, then it isn't a webcam. 2900 */ 2901 if (dev->board.is_webcam) { 2902 if (em28xx_detect_sensor(dev) < 0) 2903 dev->board.is_webcam = 0; 2904 } 2905 2906 switch (dev->model) { 2907 case EM2750_BOARD_UNKNOWN: 2908 case EM2820_BOARD_UNKNOWN: 2909 case EM2800_BOARD_UNKNOWN: 2910 /* 2911 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD. 2912 * 2913 * This occurs because they share identical USB vendor and 2914 * product IDs. 2915 * 2916 * What we do here is look up the EEPROM hash of the K-WORLD 2917 * and if it is found then we decide that we do not have 2918 * a DIGIVOX and reset the device to the K-WORLD instead. 2919 * 2920 * This solution is only valid if they do not share eeprom 2921 * hash identities which has not been determined as yet. 2922 */ 2923 if (em28xx_hint_board(dev) < 0) 2924 dev_err(&dev->intf->dev, "Board not discovered\n"); 2925 else { 2926 em28xx_set_model(dev); 2927 em28xx_pre_card_setup(dev); 2928 } 2929 break; 2930 default: 2931 em28xx_set_model(dev); 2932 } 2933 2934 dev_info(&dev->intf->dev, "Identified as %s (card=%d)\n", 2935 dev->board.name, dev->model); 2936 2937 dev->tuner_type = em28xx_boards[dev->model].tuner_type; 2938 2939 /* request some modules */ 2940 switch (dev->model) { 2941 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2: 2942 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: 2943 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: 2944 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: 2945 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: 2946 case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C: 2947 case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB: 2948 { 2949 struct tveeprom tv; 2950 2951 if (dev->eedata == NULL) 2952 break; 2953 #if defined(CONFIG_MODULES) && defined(MODULE) 2954 request_module("tveeprom"); 2955 #endif 2956 /* Call first TVeeprom */ 2957 2958 dev->i2c_client[dev->def_i2c_bus].addr = 0xa0 >> 1; 2959 tveeprom_hauppauge_analog(&dev->i2c_client[dev->def_i2c_bus], &tv, dev->eedata); 2960 2961 dev->tuner_type = tv.tuner_type; 2962 2963 if (tv.audio_processor == TVEEPROM_AUDPROC_MSP) { 2964 dev->i2s_speed = 2048000; 2965 dev->board.has_msp34xx = 1; 2966 } 2967 break; 2968 } 2969 case EM2882_BOARD_KWORLD_ATSC_315U: 2970 em28xx_write_reg(dev, 0x0d, 0x42); 2971 msleep(10); 2972 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 2973 msleep(10); 2974 break; 2975 case EM2820_BOARD_KWORLD_PVRTV2800RF: 2976 /* GPIO enables sound on KWORLD PVR TV 2800RF */ 2977 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf9); 2978 break; 2979 case EM2820_BOARD_UNKNOWN: 2980 case EM2800_BOARD_UNKNOWN: 2981 /* 2982 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD. 2983 * 2984 * This occurs because they share identical USB vendor and 2985 * product IDs. 2986 * 2987 * What we do here is look up the EEPROM hash of the K-WORLD 2988 * and if it is found then we decide that we do not have 2989 * a DIGIVOX and reset the device to the K-WORLD instead. 2990 * 2991 * This solution is only valid if they do not share eeprom 2992 * hash identities which has not been determined as yet. 2993 */ 2994 case EM2880_BOARD_MSI_DIGIVOX_AD: 2995 if (!em28xx_hint_board(dev)) 2996 em28xx_set_model(dev); 2997 2998 /* In cases where we had to use a board hint, the call to 2999 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, 3000 so make the call now so the analog GPIOs are set properly 3001 before probing the i2c bus. */ 3002 em28xx_gpio_set(dev, dev->board.tuner_gpio); 3003 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 3004 break; 3005 3006 /* 3007 * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR. 3008 * 3009 * This occurs because they share identical USB vendor and 3010 * product IDs. 3011 * 3012 * What we do here is look up the EEPROM hash of the Dikom 3013 * and if it is found then we decide that we do not have 3014 * a Kworld and reset the device to the Dikom instead. 3015 * 3016 * This solution is only valid if they do not share eeprom 3017 * hash identities which has not been determined as yet. 3018 */ 3019 case EM2882_BOARD_KWORLD_VS_DVBT: 3020 if (!em28xx_hint_board(dev)) 3021 em28xx_set_model(dev); 3022 3023 /* In cases where we had to use a board hint, the call to 3024 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, 3025 so make the call now so the analog GPIOs are set properly 3026 before probing the i2c bus. */ 3027 em28xx_gpio_set(dev, dev->board.tuner_gpio); 3028 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 3029 break; 3030 } 3031 3032 if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) { 3033 dev_err(&dev->intf->dev, 3034 "\n\n" 3035 "The support for this board weren't valid yet.\n" 3036 "Please send a report of having this working\n" 3037 "not to V4L mailing list (and/or to other addresses)\n\n"); 3038 } 3039 3040 /* Free eeprom data memory */ 3041 kfree(dev->eedata); 3042 dev->eedata = NULL; 3043 3044 /* Allow override tuner type by a module parameter */ 3045 if (tuner >= 0) 3046 dev->tuner_type = tuner; 3047 } 3048 3049 void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) 3050 { 3051 memset(ctl, 0, sizeof(*ctl)); 3052 3053 ctl->fname = XC2028_DEFAULT_FIRMWARE; 3054 ctl->max_len = 64; 3055 ctl->mts = em28xx_boards[dev->model].mts_firmware; 3056 3057 switch (dev->model) { 3058 case EM2880_BOARD_EMPIRE_DUAL_TV: 3059 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: 3060 case EM2882_BOARD_TERRATEC_HYBRID_XS: 3061 ctl->demod = XC3028_FE_ZARLINK456; 3062 break; 3063 case EM2880_BOARD_TERRATEC_HYBRID_XS: 3064 case EM2880_BOARD_TERRATEC_HYBRID_XS_FR: 3065 case EM2881_BOARD_PINNACLE_HYBRID_PRO: 3066 ctl->demod = XC3028_FE_ZARLINK456; 3067 break; 3068 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: 3069 case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E: 3070 ctl->demod = XC3028_FE_DEFAULT; 3071 break; 3072 case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600: 3073 ctl->demod = XC3028_FE_DEFAULT; 3074 ctl->fname = XC3028L_DEFAULT_FIRMWARE; 3075 break; 3076 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: 3077 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: 3078 case EM2880_BOARD_PINNACLE_PCTV_HD_PRO: 3079 /* FIXME: Better to specify the needed IF */ 3080 ctl->demod = XC3028_FE_DEFAULT; 3081 break; 3082 case EM2883_BOARD_KWORLD_HYBRID_330U: 3083 case EM2882_BOARD_DIKOM_DK300: 3084 case EM2882_BOARD_KWORLD_VS_DVBT: 3085 ctl->demod = XC3028_FE_CHINA; 3086 ctl->fname = XC2028_DEFAULT_FIRMWARE; 3087 break; 3088 case EM2882_BOARD_EVGA_INDTUBE: 3089 ctl->demod = XC3028_FE_CHINA; 3090 ctl->fname = XC3028L_DEFAULT_FIRMWARE; 3091 break; 3092 default: 3093 ctl->demod = XC3028_FE_OREN538; 3094 } 3095 } 3096 EXPORT_SYMBOL_GPL(em28xx_setup_xc3028); 3097 3098 static void request_module_async(struct work_struct *work) 3099 { 3100 struct em28xx *dev = container_of(work, 3101 struct em28xx, request_module_wk); 3102 3103 /* 3104 * The em28xx extensions can be modules or builtin. If the 3105 * modules are already loaded or are built in, those extensions 3106 * can be initialised right now. Otherwise, the module init 3107 * code will do it. 3108 */ 3109 3110 /* 3111 * Devicdes with an audio-only interface also have a V4L/DVB/RC 3112 * interface. Don't register extensions twice on those devices. 3113 */ 3114 if (dev->is_audio_only) { 3115 #if defined(CONFIG_MODULES) && defined(MODULE) 3116 request_module("em28xx-alsa"); 3117 #endif 3118 return; 3119 } 3120 3121 em28xx_init_extension(dev); 3122 3123 #if defined(CONFIG_MODULES) && defined(MODULE) 3124 if (dev->has_video) 3125 request_module("em28xx-v4l"); 3126 if (dev->usb_audio_type == EM28XX_USB_AUDIO_CLASS) 3127 request_module("snd-usb-audio"); 3128 else if (dev->usb_audio_type == EM28XX_USB_AUDIO_VENDOR) 3129 request_module("em28xx-alsa"); 3130 if (dev->board.has_dvb) 3131 request_module("em28xx-dvb"); 3132 if (dev->board.buttons || 3133 ((dev->board.ir_codes || dev->board.has_ir_i2c) && !disable_ir)) 3134 request_module("em28xx-rc"); 3135 #endif /* CONFIG_MODULES */ 3136 } 3137 3138 static void request_modules(struct em28xx *dev) 3139 { 3140 INIT_WORK(&dev->request_module_wk, request_module_async); 3141 schedule_work(&dev->request_module_wk); 3142 } 3143 3144 static void flush_request_modules(struct em28xx *dev) 3145 { 3146 flush_work(&dev->request_module_wk); 3147 } 3148 3149 static int em28xx_media_device_init(struct em28xx *dev, 3150 struct usb_device *udev) 3151 { 3152 #ifdef CONFIG_MEDIA_CONTROLLER 3153 struct media_device *mdev; 3154 3155 mdev = kzalloc(sizeof(*mdev), GFP_KERNEL); 3156 if (!mdev) 3157 return -ENOMEM; 3158 3159 if (udev->product) 3160 media_device_usb_init(mdev, udev, udev->product); 3161 else if (udev->manufacturer) 3162 media_device_usb_init(mdev, udev, udev->manufacturer); 3163 else 3164 media_device_usb_init(mdev, udev, dev_name(&dev->intf->dev)); 3165 3166 dev->media_dev = mdev; 3167 #endif 3168 return 0; 3169 } 3170 3171 static void em28xx_unregister_media_device(struct em28xx *dev) 3172 { 3173 3174 #ifdef CONFIG_MEDIA_CONTROLLER 3175 if (dev->media_dev) { 3176 media_device_unregister(dev->media_dev); 3177 media_device_cleanup(dev->media_dev); 3178 kfree(dev->media_dev); 3179 dev->media_dev = NULL; 3180 } 3181 #endif 3182 } 3183 3184 /* 3185 * em28xx_release_resources() 3186 * unregisters the v4l2,i2c and usb devices 3187 * called when the device gets disconnected or at module unload 3188 */ 3189 static void em28xx_release_resources(struct em28xx *dev) 3190 { 3191 struct usb_device *udev = interface_to_usbdev(dev->intf); 3192 3193 /*FIXME: I2C IR should be disconnected */ 3194 3195 mutex_lock(&dev->lock); 3196 3197 em28xx_unregister_media_device(dev); 3198 3199 if (dev->def_i2c_bus) 3200 em28xx_i2c_unregister(dev, 1); 3201 em28xx_i2c_unregister(dev, 0); 3202 3203 usb_put_dev(udev); 3204 3205 /* Mark device as unused */ 3206 clear_bit(dev->devno, em28xx_devused); 3207 3208 mutex_unlock(&dev->lock); 3209 }; 3210 3211 /** 3212 * em28xx_free_device() - Free em28xx device 3213 * 3214 * @ref: struct kref for em28xx device 3215 * 3216 * This is called when all extensions and em28xx core unregisters a device 3217 */ 3218 void em28xx_free_device(struct kref *ref) 3219 { 3220 struct em28xx *dev = kref_to_dev(ref); 3221 3222 dev_info(&dev->intf->dev, "Freeing device\n"); 3223 3224 if (!dev->disconnected) 3225 em28xx_release_resources(dev); 3226 3227 kfree(dev->alt_max_pkt_size_isoc); 3228 kfree(dev); 3229 } 3230 EXPORT_SYMBOL_GPL(em28xx_free_device); 3231 3232 /* 3233 * em28xx_init_dev() 3234 * allocates and inits the device structs, registers i2c bus and v4l device 3235 */ 3236 static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, 3237 struct usb_interface *interface, 3238 int minor) 3239 { 3240 int retval; 3241 const char *chip_name = NULL; 3242 3243 dev->intf = interface; 3244 mutex_init(&dev->ctrl_urb_lock); 3245 spin_lock_init(&dev->slock); 3246 3247 dev->em28xx_write_regs = em28xx_write_regs; 3248 dev->em28xx_read_reg = em28xx_read_reg; 3249 dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len; 3250 dev->em28xx_write_regs_req = em28xx_write_regs_req; 3251 dev->em28xx_read_reg_req = em28xx_read_reg_req; 3252 dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800; 3253 3254 em28xx_set_model(dev); 3255 3256 dev->wait_after_write = 5; 3257 3258 /* Based on the Chip ID, set the device configuration */ 3259 retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID); 3260 if (retval > 0) { 3261 dev->chip_id = retval; 3262 3263 switch (dev->chip_id) { 3264 case CHIP_ID_EM2800: 3265 chip_name = "em2800"; 3266 break; 3267 case CHIP_ID_EM2710: 3268 chip_name = "em2710"; 3269 break; 3270 case CHIP_ID_EM2750: 3271 chip_name = "em2750"; 3272 break; 3273 case CHIP_ID_EM2765: 3274 chip_name = "em2765"; 3275 dev->wait_after_write = 0; 3276 dev->is_em25xx = 1; 3277 dev->eeprom_addrwidth_16bit = 1; 3278 break; 3279 case CHIP_ID_EM2820: 3280 chip_name = "em2710/2820"; 3281 if (le16_to_cpu(udev->descriptor.idVendor) == 0xeb1a) { 3282 __le16 idProd = udev->descriptor.idProduct; 3283 3284 if (le16_to_cpu(idProd) == 0x2710) 3285 chip_name = "em2710"; 3286 else if (le16_to_cpu(idProd) == 0x2820) 3287 chip_name = "em2820"; 3288 } 3289 /* NOTE: the em2820 is used in webcams, too ! */ 3290 break; 3291 case CHIP_ID_EM2840: 3292 chip_name = "em2840"; 3293 break; 3294 case CHIP_ID_EM2860: 3295 chip_name = "em2860"; 3296 break; 3297 case CHIP_ID_EM2870: 3298 chip_name = "em2870"; 3299 dev->wait_after_write = 0; 3300 break; 3301 case CHIP_ID_EM2874: 3302 chip_name = "em2874"; 3303 dev->wait_after_write = 0; 3304 dev->eeprom_addrwidth_16bit = 1; 3305 break; 3306 case CHIP_ID_EM28174: 3307 chip_name = "em28174"; 3308 dev->wait_after_write = 0; 3309 dev->eeprom_addrwidth_16bit = 1; 3310 break; 3311 case CHIP_ID_EM28178: 3312 chip_name = "em28178"; 3313 dev->wait_after_write = 0; 3314 dev->eeprom_addrwidth_16bit = 1; 3315 break; 3316 case CHIP_ID_EM2883: 3317 chip_name = "em2882/3"; 3318 dev->wait_after_write = 0; 3319 break; 3320 case CHIP_ID_EM2884: 3321 chip_name = "em2884"; 3322 dev->wait_after_write = 0; 3323 dev->eeprom_addrwidth_16bit = 1; 3324 break; 3325 } 3326 } 3327 if (!chip_name) 3328 dev_info(&dev->intf->dev, 3329 "unknown em28xx chip ID (%d)\n", dev->chip_id); 3330 else 3331 dev_info(&dev->intf->dev, "chip ID is %s\n", chip_name); 3332 3333 em28xx_media_device_init(dev, udev); 3334 3335 if (dev->is_audio_only) { 3336 retval = em28xx_audio_setup(dev); 3337 if (retval) 3338 return -ENODEV; 3339 em28xx_init_extension(dev); 3340 3341 return 0; 3342 } 3343 3344 em28xx_pre_card_setup(dev); 3345 3346 if (!dev->board.is_em2800) { 3347 /* Resets I2C speed */ 3348 retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed); 3349 if (retval < 0) { 3350 dev_err(&dev->intf->dev, 3351 "%s: em28xx_write_reg failed! retval [%d]\n", 3352 __func__, retval); 3353 return retval; 3354 } 3355 } 3356 3357 rt_mutex_init(&dev->i2c_bus_lock); 3358 3359 /* register i2c bus 0 */ 3360 if (dev->board.is_em2800) 3361 retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM2800); 3362 else 3363 retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM28XX); 3364 if (retval < 0) { 3365 dev_err(&dev->intf->dev, 3366 "%s: em28xx_i2c_register bus 0 - error [%d]!\n", 3367 __func__, retval); 3368 return retval; 3369 } 3370 3371 /* register i2c bus 1 */ 3372 if (dev->def_i2c_bus) { 3373 if (dev->is_em25xx) 3374 retval = em28xx_i2c_register(dev, 1, 3375 EM28XX_I2C_ALGO_EM25XX_BUS_B); 3376 else 3377 retval = em28xx_i2c_register(dev, 1, 3378 EM28XX_I2C_ALGO_EM28XX); 3379 if (retval < 0) { 3380 dev_err(&dev->intf->dev, 3381 "%s: em28xx_i2c_register bus 1 - error [%d]!\n", 3382 __func__, retval); 3383 3384 em28xx_i2c_unregister(dev, 0); 3385 3386 return retval; 3387 } 3388 } 3389 3390 /* Do board specific init and eeprom reading */ 3391 em28xx_card_setup(dev); 3392 3393 return 0; 3394 } 3395 3396 /* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */ 3397 #define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) 3398 3399 /* 3400 * em28xx_usb_probe() 3401 * checks for supported devices 3402 */ 3403 static int em28xx_usb_probe(struct usb_interface *interface, 3404 const struct usb_device_id *id) 3405 { 3406 struct usb_device *udev; 3407 struct em28xx *dev = NULL; 3408 int retval; 3409 bool has_vendor_audio = false, has_video = false, has_dvb = false; 3410 int i, nr, try_bulk; 3411 const int ifnum = interface->altsetting[0].desc.bInterfaceNumber; 3412 char *speed; 3413 3414 udev = usb_get_dev(interface_to_usbdev(interface)); 3415 3416 /* Check to see next free device and mark as used */ 3417 do { 3418 nr = find_first_zero_bit(em28xx_devused, EM28XX_MAXBOARDS); 3419 if (nr >= EM28XX_MAXBOARDS) { 3420 /* No free device slots */ 3421 dev_err(&interface->dev, 3422 "Driver supports up to %i em28xx boards.\n", 3423 EM28XX_MAXBOARDS); 3424 retval = -ENOMEM; 3425 goto err_no_slot; 3426 } 3427 } while (test_and_set_bit(nr, em28xx_devused)); 3428 3429 /* Don't register audio interfaces */ 3430 if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { 3431 dev_err(&interface->dev, 3432 "audio device (%04x:%04x): interface %i, class %i\n", 3433 le16_to_cpu(udev->descriptor.idVendor), 3434 le16_to_cpu(udev->descriptor.idProduct), 3435 ifnum, 3436 interface->altsetting[0].desc.bInterfaceClass); 3437 3438 retval = -ENODEV; 3439 goto err; 3440 } 3441 3442 /* allocate memory for our device state and initialize it */ 3443 dev = kzalloc(sizeof(*dev), GFP_KERNEL); 3444 if (dev == NULL) { 3445 retval = -ENOMEM; 3446 goto err; 3447 } 3448 3449 /* compute alternate max packet sizes */ 3450 dev->alt_max_pkt_size_isoc = 3451 kmalloc(sizeof(dev->alt_max_pkt_size_isoc[0]) * 3452 interface->num_altsetting, GFP_KERNEL); 3453 if (dev->alt_max_pkt_size_isoc == NULL) { 3454 kfree(dev); 3455 retval = -ENOMEM; 3456 goto err; 3457 } 3458 3459 /* Get endpoints */ 3460 for (i = 0; i < interface->num_altsetting; i++) { 3461 int ep; 3462 3463 for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) { 3464 const struct usb_endpoint_descriptor *e; 3465 int sizedescr, size; 3466 3467 e = &interface->altsetting[i].endpoint[ep].desc; 3468 3469 sizedescr = le16_to_cpu(e->wMaxPacketSize); 3470 size = sizedescr & 0x7ff; 3471 3472 if (udev->speed == USB_SPEED_HIGH) 3473 size = size * hb_mult(sizedescr); 3474 3475 if (usb_endpoint_dir_in(e)) { 3476 switch (e->bEndpointAddress) { 3477 case 0x82: 3478 has_video = true; 3479 if (usb_endpoint_xfer_isoc(e)) { 3480 dev->analog_ep_isoc = 3481 e->bEndpointAddress; 3482 dev->alt_max_pkt_size_isoc[i] = size; 3483 } else if (usb_endpoint_xfer_bulk(e)) { 3484 dev->analog_ep_bulk = 3485 e->bEndpointAddress; 3486 } 3487 break; 3488 case 0x83: 3489 if (usb_endpoint_xfer_isoc(e)) { 3490 has_vendor_audio = true; 3491 } else { 3492 dev_err(&interface->dev, 3493 "error: skipping audio endpoint 0x83, because it uses bulk transfers !\n"); 3494 } 3495 break; 3496 case 0x84: 3497 if (has_video && 3498 (usb_endpoint_xfer_bulk(e))) { 3499 dev->analog_ep_bulk = 3500 e->bEndpointAddress; 3501 } else { 3502 if (usb_endpoint_xfer_isoc(e)) { 3503 if (size > dev->dvb_max_pkt_size_isoc) { 3504 has_dvb = true; /* see NOTE (~) */ 3505 dev->dvb_ep_isoc = e->bEndpointAddress; 3506 dev->dvb_max_pkt_size_isoc = size; 3507 dev->dvb_alt_isoc = i; 3508 } 3509 } else { 3510 has_dvb = true; 3511 dev->dvb_ep_bulk = e->bEndpointAddress; 3512 } 3513 } 3514 break; 3515 } 3516 } 3517 /* NOTE: 3518 * Old logic with support for isoc transfers only was: 3519 * 0x82 isoc => analog 3520 * 0x83 isoc => audio 3521 * 0x84 isoc => digital 3522 * 3523 * New logic with support for bulk transfers 3524 * 0x82 isoc => analog 3525 * 0x82 bulk => analog 3526 * 0x83 isoc* => audio 3527 * 0x84 isoc => digital 3528 * 0x84 bulk => analog or digital** 3529 * (*: audio should always be isoc) 3530 * (**: analog, if ep 0x82 is isoc, otherwise digital) 3531 * 3532 * The new logic preserves backwards compatibility and 3533 * reflects the endpoint configurations we have seen 3534 * so far. But there might be devices for which this 3535 * logic is not sufficient... 3536 */ 3537 /* 3538 * NOTE (~): some manufacturers (e.g. Terratec) disable 3539 * endpoints by setting wMaxPacketSize to 0 bytes for 3540 * all alt settings. So far, we've seen this for 3541 * DVB isoc endpoints only. 3542 */ 3543 } 3544 } 3545 3546 if (!(has_vendor_audio || has_video || has_dvb)) { 3547 retval = -ENODEV; 3548 goto err_free; 3549 } 3550 3551 switch (udev->speed) { 3552 case USB_SPEED_LOW: 3553 speed = "1.5"; 3554 break; 3555 case USB_SPEED_UNKNOWN: 3556 case USB_SPEED_FULL: 3557 speed = "12"; 3558 break; 3559 case USB_SPEED_HIGH: 3560 speed = "480"; 3561 break; 3562 default: 3563 speed = "unknown"; 3564 } 3565 3566 dev_err(&interface->dev, 3567 "New device %s %s @ %s Mbps (%04x:%04x, interface %d, class %d)\n", 3568 udev->manufacturer ? udev->manufacturer : "", 3569 udev->product ? udev->product : "", 3570 speed, 3571 le16_to_cpu(udev->descriptor.idVendor), 3572 le16_to_cpu(udev->descriptor.idProduct), 3573 ifnum, 3574 interface->altsetting->desc.bInterfaceNumber); 3575 3576 /* 3577 * Make sure we have 480 Mbps of bandwidth, otherwise things like 3578 * video stream wouldn't likely work, since 12 Mbps is generally 3579 * not enough even for most Digital TV streams. 3580 */ 3581 if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) { 3582 dev_err(&interface->dev, "Device initialization failed.\n"); 3583 dev_err(&interface->dev, 3584 "Device must be connected to a high-speed USB 2.0 port.\n"); 3585 retval = -ENODEV; 3586 goto err_free; 3587 } 3588 3589 dev->devno = nr; 3590 dev->model = id->driver_info; 3591 dev->alt = -1; 3592 dev->is_audio_only = has_vendor_audio && !(has_video || has_dvb); 3593 dev->has_video = has_video; 3594 dev->ifnum = ifnum; 3595 3596 if (has_vendor_audio) { 3597 dev_err(&interface->dev, 3598 "Audio interface %i found (Vendor Class)\n", ifnum); 3599 dev->usb_audio_type = EM28XX_USB_AUDIO_VENDOR; 3600 } 3601 /* Checks if audio is provided by a USB Audio Class interface */ 3602 for (i = 0; i < udev->config->desc.bNumInterfaces; i++) { 3603 struct usb_interface *uif = udev->config->interface[i]; 3604 3605 if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { 3606 if (has_vendor_audio) 3607 dev_err(&interface->dev, 3608 "em28xx: device seems to have vendor AND usb audio class interfaces !\n" 3609 "\t\tThe vendor interface will be ignored. Please contact the developers <linux-media@vger.kernel.org>\n"); 3610 dev->usb_audio_type = EM28XX_USB_AUDIO_CLASS; 3611 break; 3612 } 3613 } 3614 3615 if (has_video) 3616 dev_err(&interface->dev, "Video interface %i found:%s%s\n", 3617 ifnum, 3618 dev->analog_ep_bulk ? " bulk" : "", 3619 dev->analog_ep_isoc ? " isoc" : ""); 3620 if (has_dvb) 3621 dev_err(&interface->dev, "DVB interface %i found:%s%s\n", 3622 ifnum, 3623 dev->dvb_ep_bulk ? " bulk" : "", 3624 dev->dvb_ep_isoc ? " isoc" : ""); 3625 3626 dev->num_alt = interface->num_altsetting; 3627 3628 if ((unsigned)card[nr] < em28xx_bcount) 3629 dev->model = card[nr]; 3630 3631 /* save our data pointer in this interface device */ 3632 usb_set_intfdata(interface, dev); 3633 3634 /* allocate device struct and check if the device is a webcam */ 3635 mutex_init(&dev->lock); 3636 retval = em28xx_init_dev(dev, udev, interface, nr); 3637 if (retval) { 3638 goto err_free; 3639 } 3640 3641 if (usb_xfer_mode < 0) { 3642 if (dev->board.is_webcam) 3643 try_bulk = 1; 3644 else 3645 try_bulk = 0; 3646 } else { 3647 try_bulk = usb_xfer_mode > 0; 3648 } 3649 3650 /* Disable V4L2 if the device doesn't have a decoder */ 3651 if (has_video && 3652 dev->board.decoder == EM28XX_NODECODER && !dev->board.is_webcam) { 3653 dev_err(&interface->dev, 3654 "Currently, V4L2 is not supported on this model\n"); 3655 has_video = false; 3656 dev->has_video = false; 3657 } 3658 3659 /* Select USB transfer types to use */ 3660 if (has_video) { 3661 if (!dev->analog_ep_isoc || (try_bulk && dev->analog_ep_bulk)) 3662 dev->analog_xfer_bulk = 1; 3663 dev_err(&interface->dev, "analog set to %s mode.\n", 3664 dev->analog_xfer_bulk ? "bulk" : "isoc"); 3665 } 3666 if (has_dvb) { 3667 if (!dev->dvb_ep_isoc || (try_bulk && dev->dvb_ep_bulk)) 3668 dev->dvb_xfer_bulk = 1; 3669 dev_err(&interface->dev, "dvb set to %s mode.\n", 3670 dev->dvb_xfer_bulk ? "bulk" : "isoc"); 3671 } 3672 3673 kref_init(&dev->ref); 3674 3675 request_modules(dev); 3676 3677 /* 3678 * Do it at the end, to reduce dynamic configuration changes during 3679 * the device init. Yet, as request_modules() can be async, the 3680 * topology will likely change after the load of the em28xx subdrivers. 3681 */ 3682 #ifdef CONFIG_MEDIA_CONTROLLER 3683 retval = media_device_register(dev->media_dev); 3684 #endif 3685 3686 return 0; 3687 3688 err_free: 3689 kfree(dev->alt_max_pkt_size_isoc); 3690 kfree(dev); 3691 3692 err: 3693 clear_bit(nr, em28xx_devused); 3694 3695 err_no_slot: 3696 usb_put_dev(udev); 3697 return retval; 3698 } 3699 3700 /* 3701 * em28xx_usb_disconnect() 3702 * called when the device gets disconnected 3703 * video device will be unregistered on v4l2_close in case it is still open 3704 */ 3705 static void em28xx_usb_disconnect(struct usb_interface *interface) 3706 { 3707 struct em28xx *dev; 3708 3709 dev = usb_get_intfdata(interface); 3710 usb_set_intfdata(interface, NULL); 3711 3712 if (!dev) 3713 return; 3714 3715 dev->disconnected = 1; 3716 3717 dev_err(&dev->intf->dev, "Disconnecting\n"); 3718 3719 flush_request_modules(dev); 3720 3721 em28xx_close_extension(dev); 3722 3723 em28xx_release_resources(dev); 3724 kref_put(&dev->ref, em28xx_free_device); 3725 } 3726 3727 static int em28xx_usb_suspend(struct usb_interface *interface, 3728 pm_message_t message) 3729 { 3730 struct em28xx *dev; 3731 3732 dev = usb_get_intfdata(interface); 3733 if (!dev) 3734 return 0; 3735 em28xx_suspend_extension(dev); 3736 return 0; 3737 } 3738 3739 static int em28xx_usb_resume(struct usb_interface *interface) 3740 { 3741 struct em28xx *dev; 3742 3743 dev = usb_get_intfdata(interface); 3744 if (!dev) 3745 return 0; 3746 em28xx_resume_extension(dev); 3747 return 0; 3748 } 3749 3750 static struct usb_driver em28xx_usb_driver = { 3751 .name = "em28xx", 3752 .probe = em28xx_usb_probe, 3753 .disconnect = em28xx_usb_disconnect, 3754 .suspend = em28xx_usb_suspend, 3755 .resume = em28xx_usb_resume, 3756 .reset_resume = em28xx_usb_resume, 3757 .id_table = em28xx_id_table, 3758 }; 3759 3760 module_usb_driver(em28xx_usb_driver); 3761