1 /* 2 em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB 3 video capture devices 4 5 Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it> 6 Markus Rechberger <mrechberger@gmail.com> 7 Mauro Carvalho Chehab <mchehab@infradead.org> 8 Sascha Sommer <saschasommer@freenet.de> 9 Copyright (C) 2012 Frank Schäfer <fschaefer.oss@googlemail.com> 10 11 This program is free software; you can redistribute it and/or modify 12 it under the terms of the GNU General Public License as published by 13 the Free Software Foundation; either version 2 of the License, or 14 (at your option) any later version. 15 16 This program is distributed in the hope that it will be useful, 17 but WITHOUT ANY WARRANTY; without even the implied warranty of 18 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 GNU General Public License for more details. 20 21 You should have received a copy of the GNU General Public License 22 along with this program; if not, write to the Free Software 23 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 24 */ 25 26 #include <linux/init.h> 27 #include <linux/module.h> 28 #include <linux/slab.h> 29 #include <linux/delay.h> 30 #include <linux/i2c.h> 31 #include <linux/usb.h> 32 #include <media/tuner.h> 33 #include <media/msp3400.h> 34 #include <media/saa7115.h> 35 #include <media/tvp5150.h> 36 #include <media/tvaudio.h> 37 #include <media/i2c-addr.h> 38 #include <media/tveeprom.h> 39 #include <media/v4l2-clk.h> 40 #include <media/v4l2-common.h> 41 42 #include "em28xx.h" 43 44 #define DRIVER_NAME "em28xx" 45 46 static int tuner = -1; 47 module_param(tuner, int, 0444); 48 MODULE_PARM_DESC(tuner, "tuner type"); 49 50 static unsigned int disable_ir; 51 module_param(disable_ir, int, 0444); 52 MODULE_PARM_DESC(disable_ir, "disable infrared remote support"); 53 54 static unsigned int disable_usb_speed_check; 55 module_param(disable_usb_speed_check, int, 0444); 56 MODULE_PARM_DESC(disable_usb_speed_check, 57 "override min bandwidth requirement of 480M bps"); 58 59 static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U }; 60 module_param_array(card, int, NULL, 0444); 61 MODULE_PARM_DESC(card, "card type"); 62 63 static int usb_xfer_mode = -1; 64 module_param(usb_xfer_mode, int, 0444); 65 MODULE_PARM_DESC(usb_xfer_mode, 66 "USB transfer mode for frame data (-1 = auto, 0 = prefer isoc, 1 = prefer bulk)"); 67 68 69 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */ 70 static unsigned long em28xx_devused; 71 72 struct em28xx_hash_table { 73 unsigned long hash; 74 unsigned int model; 75 unsigned int tuner; 76 }; 77 78 static void em28xx_pre_card_setup(struct em28xx *dev); 79 80 /* 81 * Reset sequences for analog/digital modes 82 */ 83 84 /* Reset for the most [analog] boards */ 85 static struct em28xx_reg_seq default_analog[] = { 86 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 87 { -1, -1, -1, -1}, 88 }; 89 90 /* Reset for the most [digital] boards */ 91 static struct em28xx_reg_seq default_digital[] = { 92 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 93 { -1, -1, -1, -1}, 94 }; 95 96 /* Board Hauppauge WinTV HVR 900 analog */ 97 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = { 98 {EM2820_R08_GPIO_CTRL, 0x2d, ~EM_GPIO_4, 10}, 99 { 0x05, 0xff, 0x10, 10}, 100 { -1, -1, -1, -1}, 101 }; 102 103 /* Board Hauppauge WinTV HVR 900 digital */ 104 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = { 105 {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10}, 106 {EM2880_R04_GPO, 0x04, 0x0f, 10}, 107 {EM2880_R04_GPO, 0x0c, 0x0f, 10}, 108 { -1, -1, -1, -1}, 109 }; 110 111 /* Board Hauppauge WinTV HVR 900 (R2) digital */ 112 static struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = { 113 {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10}, 114 {EM2880_R04_GPO, 0x0c, 0x0f, 10}, 115 { -1, -1, -1, -1}, 116 }; 117 118 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */ 119 static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = { 120 {EM2820_R08_GPIO_CTRL, 0x69, ~EM_GPIO_4, 10}, 121 { -1, -1, -1, -1}, 122 }; 123 124 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */ 125 126 /* Board - EM2870 Kworld 355u 127 Analog - No input analog */ 128 129 /* Board - EM2882 Kworld 315U digital */ 130 static struct em28xx_reg_seq em2882_kworld_315u_digital[] = { 131 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 132 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, 133 {EM2880_R04_GPO, 0x04, 0xff, 10}, 134 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 135 {EM2820_R08_GPIO_CTRL, 0x7e, 0xff, 10}, 136 { -1, -1, -1, -1}, 137 }; 138 139 static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = { 140 {EM2880_R04_GPO, 0x08, 0xff, 10}, 141 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 142 {EM2880_R04_GPO, 0x08, 0xff, 10}, 143 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 144 { -1, -1, -1, -1}, 145 }; 146 147 static struct em28xx_reg_seq kworld_330u_analog[] = { 148 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 149 {EM2880_R04_GPO, 0x00, 0xff, 10}, 150 { -1, -1, -1, -1}, 151 }; 152 153 static struct em28xx_reg_seq kworld_330u_digital[] = { 154 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 155 {EM2880_R04_GPO, 0x08, 0xff, 10}, 156 { -1, -1, -1, -1}, 157 }; 158 159 /* Evga inDtube 160 GPIO0 - Enable digital power (s5h1409) - low to enable 161 GPIO1 - Enable analog power (tvp5150/emp202) - low to enable 162 GPIO4 - xc3028 reset 163 GOP3 - s5h1409 reset 164 */ 165 static struct em28xx_reg_seq evga_indtube_analog[] = { 166 {EM2820_R08_GPIO_CTRL, 0x79, 0xff, 60}, 167 { -1, -1, -1, -1}, 168 }; 169 170 static struct em28xx_reg_seq evga_indtube_digital[] = { 171 {EM2820_R08_GPIO_CTRL, 0x7a, 0xff, 1}, 172 {EM2880_R04_GPO, 0x04, 0xff, 10}, 173 {EM2880_R04_GPO, 0x0c, 0xff, 1}, 174 { -1, -1, -1, -1}, 175 }; 176 177 /* 178 * KWorld PlusTV 340U, UB435-Q and UB435-Q V2 (ATSC) GPIOs map: 179 * EM_GPIO_0 - currently unknown 180 * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on) 181 * EM_GPIO_2 - currently unknown 182 * EM_GPIO_3 - currently unknown 183 * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset) 184 * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset) 185 * EM_GPIO_6 - currently unknown 186 * EM_GPIO_7 - currently unknown 187 */ 188 static struct em28xx_reg_seq kworld_a340_digital[] = { 189 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 190 { -1, -1, -1, -1}, 191 }; 192 193 /* Pinnacle Hybrid Pro eb1a:2881 */ 194 static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = { 195 {EM2820_R08_GPIO_CTRL, 0xfd, ~EM_GPIO_4, 10}, 196 { -1, -1, -1, -1}, 197 }; 198 199 static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = { 200 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 201 {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */ 202 {EM2880_R04_GPO, 0x0c, 0xff, 1}, 203 { -1, -1, -1, -1}, 204 }; 205 206 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = { 207 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 208 {EM2880_R04_GPO, 0x00, 0xff, 10}, 209 { -1, -1, -1, -1}, 210 }; 211 212 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = { 213 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 214 {EM2880_R04_GPO, 0x08, 0xff, 10}, 215 { -1, -1, -1, -1}, 216 }; 217 218 /* eb1a:2868 Reddo DVB-C USB TV Box 219 GPIO4 - CU1216L NIM 220 Other GPIOs seems to be don't care. */ 221 static struct em28xx_reg_seq reddo_dvb_c_usb_box[] = { 222 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, 223 {EM2820_R08_GPIO_CTRL, 0xde, 0xff, 10}, 224 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, 225 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 226 {EM2820_R08_GPIO_CTRL, 0x7f, 0xff, 10}, 227 {EM2820_R08_GPIO_CTRL, 0x6f, 0xff, 10}, 228 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 229 { -1, -1, -1, -1}, 230 }; 231 232 /* Callback for the most boards */ 233 static struct em28xx_reg_seq default_tuner_gpio[] = { 234 {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10}, 235 {EM2820_R08_GPIO_CTRL, 0, EM_GPIO_4, 10}, 236 {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10}, 237 { -1, -1, -1, -1}, 238 }; 239 240 /* Mute/unmute */ 241 static struct em28xx_reg_seq compro_unmute_tv_gpio[] = { 242 {EM2820_R08_GPIO_CTRL, 5, 7, 10}, 243 { -1, -1, -1, -1}, 244 }; 245 246 static struct em28xx_reg_seq compro_unmute_svid_gpio[] = { 247 {EM2820_R08_GPIO_CTRL, 4, 7, 10}, 248 { -1, -1, -1, -1}, 249 }; 250 251 static struct em28xx_reg_seq compro_mute_gpio[] = { 252 {EM2820_R08_GPIO_CTRL, 6, 7, 10}, 253 { -1, -1, -1, -1}, 254 }; 255 256 /* Terratec AV350 */ 257 static struct em28xx_reg_seq terratec_av350_mute_gpio[] = { 258 {EM2820_R08_GPIO_CTRL, 0xff, 0x7f, 10}, 259 { -1, -1, -1, -1}, 260 }; 261 262 static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = { 263 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 264 { -1, -1, -1, -1}, 265 }; 266 267 static struct em28xx_reg_seq silvercrest_reg_seq[] = { 268 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 269 {EM2820_R08_GPIO_CTRL, 0x01, 0xf7, 10}, 270 { -1, -1, -1, -1}, 271 }; 272 273 static struct em28xx_reg_seq vc211a_enable[] = { 274 {EM2820_R08_GPIO_CTRL, 0xff, 0x07, 10}, 275 {EM2820_R08_GPIO_CTRL, 0xff, 0x0f, 10}, 276 {EM2820_R08_GPIO_CTRL, 0xff, 0x0b, 10}, 277 { -1, -1, -1, -1}, 278 }; 279 280 static struct em28xx_reg_seq dikom_dk300_digital[] = { 281 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 282 {EM2880_R04_GPO, 0x08, 0xff, 10}, 283 { -1, -1, -1, -1}, 284 }; 285 286 287 /* Reset for the most [digital] boards */ 288 static struct em28xx_reg_seq leadership_digital[] = { 289 {EM2874_R80_GPIO_P0_CTRL, 0x70, 0xff, 10}, 290 { -1, -1, -1, -1}, 291 }; 292 293 static struct em28xx_reg_seq leadership_reset[] = { 294 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10}, 295 {EM2874_R80_GPIO_P0_CTRL, 0xb0, 0xff, 10}, 296 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10}, 297 { -1, -1, -1, -1}, 298 }; 299 300 /* 2013:024f PCTV nanoStick T2 290e 301 * GPIO_6 - demod reset 302 * GPIO_7 - LED 303 */ 304 static struct em28xx_reg_seq pctv_290e[] = { 305 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 80}, 306 {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 80}, /* GPIO_6 = 1 */ 307 {EM2874_R80_GPIO_P0_CTRL, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */ 308 { -1, -1, -1, -1}, 309 }; 310 311 #if 0 312 static struct em28xx_reg_seq terratec_h5_gpio[] = { 313 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 314 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100}, 315 {EM2874_R80_GPIO_P0_CTRL, 0xf2, 0xff, 50}, 316 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 50}, 317 { -1, -1, -1, -1}, 318 }; 319 320 static struct em28xx_reg_seq terratec_h5_digital[] = { 321 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10}, 322 {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, 323 {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10}, 324 { -1, -1, -1, -1}, 325 }; 326 #endif 327 328 /* 2013:024f PCTV DVB-S2 Stick 460e 329 * GPIO_0 - POWER_ON 330 * GPIO_1 - BOOST 331 * GPIO_2 - VUV_LNB (red LED) 332 * GPIO_3 - EXT_12V 333 * GPIO_4 - INT_DEM (DEMOD GPIO_0) 334 * GPIO_5 - INT_LNB 335 * GPIO_6 - RESET_DEM 336 * GPIO_7 - LED (green LED) 337 */ 338 static struct em28xx_reg_seq pctv_460e[] = { 339 {EM2874_R80_GPIO_P0_CTRL, 0x01, 0xff, 50}, 340 { 0x0d, 0xff, 0xff, 50}, 341 {EM2874_R80_GPIO_P0_CTRL, 0x41, 0xff, 50}, /* GPIO_6=1 */ 342 { 0x0d, 0x42, 0xff, 50}, 343 {EM2874_R80_GPIO_P0_CTRL, 0x61, 0xff, 50}, /* GPIO_5=1 */ 344 { -1, -1, -1, -1}, 345 }; 346 347 static struct em28xx_reg_seq c3tech_digital_duo_digital[] = { 348 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10}, 349 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, /* xc5000 reset */ 350 {EM2874_R80_GPIO_P0_CTRL, 0xf9, 0xff, 35}, 351 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, 352 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10}, 353 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 10}, 354 {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 10}, 355 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 20}, 356 { -1, -1, -1, -1}, 357 }; 358 359 #if 0 360 static struct em28xx_reg_seq hauppauge_930c_gpio[] = { 361 {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10}, 362 {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, /* xc5000 reset */ 363 {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10}, 364 {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, 365 { -1, -1, -1, -1}, 366 }; 367 368 static struct em28xx_reg_seq hauppauge_930c_digital[] = { 369 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10}, 370 {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, 371 {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10}, 372 { -1, -1, -1, -1}, 373 }; 374 #endif 375 376 /* 1b80:e425 MaxMedia UB425-TC 377 * 1b80:e1cc Delock 61959 378 * GPIO_6 - demod reset, 0=active 379 * GPIO_7 - LED, 0=active 380 */ 381 static struct em28xx_reg_seq maxmedia_ub425_tc[] = { 382 {EM2874_R80_GPIO_P0_CTRL, 0x83, 0xff, 100}, 383 {EM2874_R80_GPIO_P0_CTRL, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */ 384 {EM2874_R80_GPIO_P0_CTRL, 0x43, 0xff, 000}, /* GPIO_7 = 0 */ 385 { -1, -1, -1, -1}, 386 }; 387 388 /* 2304:0242 PCTV QuatroStick (510e) 389 * GPIO_2: decoder reset, 0=active 390 * GPIO_4: decoder suspend, 0=active 391 * GPIO_6: demod reset, 0=active 392 * GPIO_7: LED, 1=active 393 */ 394 static struct em28xx_reg_seq pctv_510e[] = { 395 {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100}, 396 {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ 397 {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ 398 { -1, -1, -1, -1}, 399 }; 400 401 /* 2013:0251 PCTV QuatroStick nano (520e) 402 * GPIO_2: decoder reset, 0=active 403 * GPIO_4: decoder suspend, 0=active 404 * GPIO_6: demod reset, 0=active 405 * GPIO_7: LED, 1=active 406 */ 407 static struct em28xx_reg_seq pctv_520e[] = { 408 {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100}, 409 {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ 410 {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ 411 {EM2874_R80_GPIO_P0_CTRL, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */ 412 { -1, -1, -1, -1}, 413 }; 414 415 /* 416 * Board definitions 417 */ 418 struct em28xx_board em28xx_boards[] = { 419 [EM2750_BOARD_UNKNOWN] = { 420 .name = "EM2710/EM2750/EM2751 webcam grabber", 421 .xclk = EM28XX_XCLK_FREQUENCY_20MHZ, 422 .tuner_type = TUNER_ABSENT, 423 .is_webcam = 1, 424 .input = { { 425 .type = EM28XX_VMUX_COMPOSITE1, 426 .vmux = 0, 427 .amux = EM28XX_AMUX_VIDEO, 428 .gpio = silvercrest_reg_seq, 429 } }, 430 }, 431 [EM2800_BOARD_UNKNOWN] = { 432 .name = "Unknown EM2800 video grabber", 433 .is_em2800 = 1, 434 .tda9887_conf = TDA9887_PRESENT, 435 .decoder = EM28XX_SAA711X, 436 .tuner_type = TUNER_ABSENT, 437 .input = { { 438 .type = EM28XX_VMUX_COMPOSITE1, 439 .vmux = SAA7115_COMPOSITE0, 440 .amux = EM28XX_AMUX_LINE_IN, 441 }, { 442 .type = EM28XX_VMUX_SVIDEO, 443 .vmux = SAA7115_SVIDEO3, 444 .amux = EM28XX_AMUX_LINE_IN, 445 } }, 446 }, 447 [EM2820_BOARD_UNKNOWN] = { 448 .name = "Unknown EM2750/28xx video grabber", 449 .tuner_type = TUNER_ABSENT, 450 .is_webcam = 1, /* To enable sensor probe */ 451 }, 452 [EM2750_BOARD_DLCW_130] = { 453 /* Beijing Huaqi Information Digital Technology Co., Ltd */ 454 .name = "Huaqi DLCW-130", 455 .valid = EM28XX_BOARD_NOT_VALIDATED, 456 .xclk = EM28XX_XCLK_FREQUENCY_48MHZ, 457 .tuner_type = TUNER_ABSENT, 458 .is_webcam = 1, 459 .input = { { 460 .type = EM28XX_VMUX_COMPOSITE1, 461 .vmux = 0, 462 .amux = EM28XX_AMUX_VIDEO, 463 } }, 464 }, 465 [EM2820_BOARD_KWORLD_PVRTV2800RF] = { 466 .name = "Kworld PVR TV 2800 RF", 467 .tuner_type = TUNER_TEMIC_PAL, 468 .tda9887_conf = TDA9887_PRESENT, 469 .decoder = EM28XX_SAA711X, 470 .input = { { 471 .type = EM28XX_VMUX_COMPOSITE1, 472 .vmux = SAA7115_COMPOSITE0, 473 .amux = EM28XX_AMUX_LINE_IN, 474 }, { 475 .type = EM28XX_VMUX_SVIDEO, 476 .vmux = SAA7115_SVIDEO3, 477 .amux = EM28XX_AMUX_LINE_IN, 478 } }, 479 }, 480 [EM2820_BOARD_GADMEI_TVR200] = { 481 .name = "Gadmei TVR200", 482 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 483 .tda9887_conf = TDA9887_PRESENT, 484 .decoder = EM28XX_SAA711X, 485 .input = { { 486 .type = EM28XX_VMUX_TELEVISION, 487 .vmux = SAA7115_COMPOSITE2, 488 .amux = EM28XX_AMUX_LINE_IN, 489 }, { 490 .type = EM28XX_VMUX_COMPOSITE1, 491 .vmux = SAA7115_COMPOSITE0, 492 .amux = EM28XX_AMUX_LINE_IN, 493 }, { 494 .type = EM28XX_VMUX_SVIDEO, 495 .vmux = SAA7115_SVIDEO3, 496 .amux = EM28XX_AMUX_LINE_IN, 497 } }, 498 }, 499 [EM2820_BOARD_TERRATEC_CINERGY_250] = { 500 .name = "Terratec Cinergy 250 USB", 501 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 502 .has_ir_i2c = 1, 503 .tda9887_conf = TDA9887_PRESENT, 504 .decoder = EM28XX_SAA711X, 505 .input = { { 506 .type = EM28XX_VMUX_TELEVISION, 507 .vmux = SAA7115_COMPOSITE2, 508 .amux = EM28XX_AMUX_VIDEO, 509 }, { 510 .type = EM28XX_VMUX_COMPOSITE1, 511 .vmux = SAA7115_COMPOSITE0, 512 .amux = EM28XX_AMUX_LINE_IN, 513 }, { 514 .type = EM28XX_VMUX_SVIDEO, 515 .vmux = SAA7115_SVIDEO3, 516 .amux = EM28XX_AMUX_LINE_IN, 517 } }, 518 }, 519 [EM2820_BOARD_PINNACLE_USB_2] = { 520 .name = "Pinnacle PCTV USB 2", 521 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 522 .has_ir_i2c = 1, 523 .tda9887_conf = TDA9887_PRESENT, 524 .decoder = EM28XX_SAA711X, 525 .input = { { 526 .type = EM28XX_VMUX_TELEVISION, 527 .vmux = SAA7115_COMPOSITE2, 528 .amux = EM28XX_AMUX_VIDEO, 529 }, { 530 .type = EM28XX_VMUX_COMPOSITE1, 531 .vmux = SAA7115_COMPOSITE0, 532 .amux = EM28XX_AMUX_LINE_IN, 533 }, { 534 .type = EM28XX_VMUX_SVIDEO, 535 .vmux = SAA7115_SVIDEO3, 536 .amux = EM28XX_AMUX_LINE_IN, 537 } }, 538 }, 539 [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = { 540 .name = "Hauppauge WinTV USB 2", 541 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 542 .tda9887_conf = TDA9887_PRESENT | 543 TDA9887_PORT1_ACTIVE | 544 TDA9887_PORT2_ACTIVE, 545 .decoder = EM28XX_TVP5150, 546 .has_msp34xx = 1, 547 .has_ir_i2c = 1, 548 .input = { { 549 .type = EM28XX_VMUX_TELEVISION, 550 .vmux = TVP5150_COMPOSITE0, 551 .amux = MSP_INPUT_DEFAULT, 552 }, { 553 .type = EM28XX_VMUX_SVIDEO, 554 .vmux = TVP5150_SVIDEO, 555 .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1, 556 MSP_DSP_IN_SCART, MSP_DSP_IN_SCART), 557 } }, 558 }, 559 [EM2820_BOARD_DLINK_USB_TV] = { 560 .name = "D-Link DUB-T210 TV Tuner", 561 .valid = EM28XX_BOARD_NOT_VALIDATED, 562 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 563 .tda9887_conf = TDA9887_PRESENT, 564 .decoder = EM28XX_SAA711X, 565 .input = { { 566 .type = EM28XX_VMUX_TELEVISION, 567 .vmux = SAA7115_COMPOSITE2, 568 .amux = EM28XX_AMUX_LINE_IN, 569 }, { 570 .type = EM28XX_VMUX_COMPOSITE1, 571 .vmux = SAA7115_COMPOSITE0, 572 .amux = EM28XX_AMUX_LINE_IN, 573 }, { 574 .type = EM28XX_VMUX_SVIDEO, 575 .vmux = SAA7115_SVIDEO3, 576 .amux = EM28XX_AMUX_LINE_IN, 577 } }, 578 }, 579 [EM2820_BOARD_HERCULES_SMART_TV_USB2] = { 580 .name = "Hercules Smart TV USB 2.0", 581 .valid = EM28XX_BOARD_NOT_VALIDATED, 582 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 583 .tda9887_conf = TDA9887_PRESENT, 584 .decoder = EM28XX_SAA711X, 585 .input = { { 586 .type = EM28XX_VMUX_TELEVISION, 587 .vmux = SAA7115_COMPOSITE2, 588 .amux = EM28XX_AMUX_LINE_IN, 589 }, { 590 .type = EM28XX_VMUX_COMPOSITE1, 591 .vmux = SAA7115_COMPOSITE0, 592 .amux = EM28XX_AMUX_LINE_IN, 593 }, { 594 .type = EM28XX_VMUX_SVIDEO, 595 .vmux = SAA7115_SVIDEO3, 596 .amux = EM28XX_AMUX_LINE_IN, 597 } }, 598 }, 599 [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = { 600 .name = "Pinnacle PCTV USB 2 (Philips FM1216ME)", 601 .valid = EM28XX_BOARD_NOT_VALIDATED, 602 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, 603 .tda9887_conf = TDA9887_PRESENT, 604 .decoder = EM28XX_SAA711X, 605 .input = { { 606 .type = EM28XX_VMUX_TELEVISION, 607 .vmux = SAA7115_COMPOSITE2, 608 .amux = EM28XX_AMUX_VIDEO, 609 }, { 610 .type = EM28XX_VMUX_COMPOSITE1, 611 .vmux = SAA7115_COMPOSITE0, 612 .amux = EM28XX_AMUX_LINE_IN, 613 }, { 614 .type = EM28XX_VMUX_SVIDEO, 615 .vmux = SAA7115_SVIDEO3, 616 .amux = EM28XX_AMUX_LINE_IN, 617 } }, 618 }, 619 [EM2820_BOARD_GADMEI_UTV310] = { 620 .name = "Gadmei UTV310", 621 .valid = EM28XX_BOARD_NOT_VALIDATED, 622 .tuner_type = TUNER_TNF_5335MF, 623 .tda9887_conf = TDA9887_PRESENT, 624 .decoder = EM28XX_SAA711X, 625 .input = { { 626 .type = EM28XX_VMUX_TELEVISION, 627 .vmux = SAA7115_COMPOSITE1, 628 .amux = EM28XX_AMUX_LINE_IN, 629 }, { 630 .type = EM28XX_VMUX_COMPOSITE1, 631 .vmux = SAA7115_COMPOSITE0, 632 .amux = EM28XX_AMUX_LINE_IN, 633 }, { 634 .type = EM28XX_VMUX_SVIDEO, 635 .vmux = SAA7115_SVIDEO3, 636 .amux = EM28XX_AMUX_LINE_IN, 637 } }, 638 }, 639 [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = { 640 .name = "Leadtek Winfast USB II Deluxe", 641 .valid = EM28XX_BOARD_NOT_VALIDATED, 642 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, 643 .has_ir_i2c = 1, 644 .tvaudio_addr = 0x58, 645 .tda9887_conf = TDA9887_PRESENT | 646 TDA9887_PORT2_ACTIVE | 647 TDA9887_QSS, 648 .decoder = EM28XX_SAA711X, 649 .adecoder = EM28XX_TVAUDIO, 650 .input = { { 651 .type = EM28XX_VMUX_TELEVISION, 652 .vmux = SAA7115_COMPOSITE4, 653 .amux = EM28XX_AMUX_AUX, 654 }, { 655 .type = EM28XX_VMUX_COMPOSITE1, 656 .vmux = SAA7115_COMPOSITE5, 657 .amux = EM28XX_AMUX_LINE_IN, 658 }, { 659 .type = EM28XX_VMUX_SVIDEO, 660 .vmux = SAA7115_SVIDEO3, 661 .amux = EM28XX_AMUX_LINE_IN, 662 } }, 663 .radio = { 664 .type = EM28XX_RADIO, 665 .amux = EM28XX_AMUX_AUX, 666 } 667 }, 668 [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = { 669 .name = "Videology 20K14XUSB USB2.0", 670 .valid = EM28XX_BOARD_NOT_VALIDATED, 671 .tuner_type = TUNER_ABSENT, 672 .is_webcam = 1, 673 .input = { { 674 .type = EM28XX_VMUX_COMPOSITE1, 675 .vmux = 0, 676 .amux = EM28XX_AMUX_VIDEO, 677 } }, 678 }, 679 [EM2820_BOARD_SILVERCREST_WEBCAM] = { 680 .name = "Silvercrest Webcam 1.3mpix", 681 .tuner_type = TUNER_ABSENT, 682 .is_webcam = 1, 683 .input = { { 684 .type = EM28XX_VMUX_COMPOSITE1, 685 .vmux = 0, 686 .amux = EM28XX_AMUX_VIDEO, 687 .gpio = silvercrest_reg_seq, 688 } }, 689 }, 690 [EM2821_BOARD_SUPERCOMP_USB_2] = { 691 .name = "Supercomp USB 2.0 TV", 692 .valid = EM28XX_BOARD_NOT_VALIDATED, 693 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 694 .tda9887_conf = TDA9887_PRESENT | 695 TDA9887_PORT1_ACTIVE | 696 TDA9887_PORT2_ACTIVE, 697 .decoder = EM28XX_SAA711X, 698 .input = { { 699 .type = EM28XX_VMUX_TELEVISION, 700 .vmux = SAA7115_COMPOSITE2, 701 .amux = EM28XX_AMUX_LINE_IN, 702 }, { 703 .type = EM28XX_VMUX_COMPOSITE1, 704 .vmux = SAA7115_COMPOSITE0, 705 .amux = EM28XX_AMUX_VIDEO, 706 }, { 707 .type = EM28XX_VMUX_SVIDEO, 708 .vmux = SAA7115_SVIDEO3, 709 .amux = EM28XX_AMUX_LINE_IN, 710 } }, 711 }, 712 [EM2821_BOARD_USBGEAR_VD204] = { 713 .name = "Usbgear VD204v9", 714 .valid = EM28XX_BOARD_NOT_VALIDATED, 715 .tuner_type = TUNER_ABSENT, /* Capture only device */ 716 .decoder = EM28XX_SAA711X, 717 .input = { { 718 .type = EM28XX_VMUX_COMPOSITE1, 719 .vmux = SAA7115_COMPOSITE0, 720 .amux = EM28XX_AMUX_LINE_IN, 721 }, { 722 .type = EM28XX_VMUX_SVIDEO, 723 .vmux = SAA7115_SVIDEO3, 724 .amux = EM28XX_AMUX_LINE_IN, 725 } }, 726 }, 727 [EM2860_BOARD_NETGMBH_CAM] = { 728 /* Beijing Huaqi Information Digital Technology Co., Ltd */ 729 .name = "NetGMBH Cam", 730 .valid = EM28XX_BOARD_NOT_VALIDATED, 731 .tuner_type = TUNER_ABSENT, 732 .is_webcam = 1, 733 .input = { { 734 .type = EM28XX_VMUX_COMPOSITE1, 735 .vmux = 0, 736 .amux = EM28XX_AMUX_VIDEO, 737 } }, 738 }, 739 [EM2860_BOARD_TYPHOON_DVD_MAKER] = { 740 .name = "Typhoon DVD Maker", 741 .decoder = EM28XX_SAA711X, 742 .tuner_type = TUNER_ABSENT, /* Capture only device */ 743 .input = { { 744 .type = EM28XX_VMUX_COMPOSITE1, 745 .vmux = SAA7115_COMPOSITE0, 746 .amux = EM28XX_AMUX_LINE_IN, 747 }, { 748 .type = EM28XX_VMUX_SVIDEO, 749 .vmux = SAA7115_SVIDEO3, 750 .amux = EM28XX_AMUX_LINE_IN, 751 } }, 752 }, 753 [EM2860_BOARD_GADMEI_UTV330] = { 754 .name = "Gadmei UTV330", 755 .valid = EM28XX_BOARD_NOT_VALIDATED, 756 .tuner_type = TUNER_TNF_5335MF, 757 .tda9887_conf = TDA9887_PRESENT, 758 .decoder = EM28XX_SAA711X, 759 .input = { { 760 .type = EM28XX_VMUX_TELEVISION, 761 .vmux = SAA7115_COMPOSITE2, 762 .amux = EM28XX_AMUX_VIDEO, 763 }, { 764 .type = EM28XX_VMUX_COMPOSITE1, 765 .vmux = SAA7115_COMPOSITE0, 766 .amux = EM28XX_AMUX_LINE_IN, 767 }, { 768 .type = EM28XX_VMUX_SVIDEO, 769 .vmux = SAA7115_SVIDEO3, 770 .amux = EM28XX_AMUX_LINE_IN, 771 } }, 772 }, 773 [EM2861_BOARD_GADMEI_UTV330PLUS] = { 774 .name = "Gadmei UTV330+", 775 .tuner_type = TUNER_TNF_5335MF, 776 .tda9887_conf = TDA9887_PRESENT, 777 .ir_codes = RC_MAP_GADMEI_RM008Z, 778 .decoder = EM28XX_SAA711X, 779 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 780 .input = { { 781 .type = EM28XX_VMUX_TELEVISION, 782 .vmux = SAA7115_COMPOSITE2, 783 .amux = EM28XX_AMUX_VIDEO, 784 }, { 785 .type = EM28XX_VMUX_COMPOSITE1, 786 .vmux = SAA7115_COMPOSITE0, 787 .amux = EM28XX_AMUX_LINE_IN, 788 }, { 789 .type = EM28XX_VMUX_SVIDEO, 790 .vmux = SAA7115_SVIDEO3, 791 .amux = EM28XX_AMUX_LINE_IN, 792 } }, 793 }, 794 [EM2860_BOARD_TERRATEC_HYBRID_XS] = { 795 .name = "Terratec Cinergy A Hybrid XS", 796 .valid = EM28XX_BOARD_NOT_VALIDATED, 797 .tuner_type = TUNER_XC2028, 798 .tuner_gpio = default_tuner_gpio, 799 .decoder = EM28XX_TVP5150, 800 801 .input = { { 802 .type = EM28XX_VMUX_TELEVISION, 803 .vmux = TVP5150_COMPOSITE0, 804 .amux = EM28XX_AMUX_VIDEO, 805 .gpio = hauppauge_wintv_hvr_900_analog, 806 }, { 807 .type = EM28XX_VMUX_COMPOSITE1, 808 .vmux = TVP5150_COMPOSITE1, 809 .amux = EM28XX_AMUX_LINE_IN, 810 .gpio = hauppauge_wintv_hvr_900_analog, 811 }, { 812 .type = EM28XX_VMUX_SVIDEO, 813 .vmux = TVP5150_SVIDEO, 814 .amux = EM28XX_AMUX_LINE_IN, 815 .gpio = hauppauge_wintv_hvr_900_analog, 816 } }, 817 }, 818 [EM2861_BOARD_KWORLD_PVRTV_300U] = { 819 .name = "KWorld PVRTV 300U", 820 .valid = EM28XX_BOARD_NOT_VALIDATED, 821 .tuner_type = TUNER_XC2028, 822 .tuner_gpio = default_tuner_gpio, 823 .decoder = EM28XX_TVP5150, 824 .input = { { 825 .type = EM28XX_VMUX_TELEVISION, 826 .vmux = TVP5150_COMPOSITE0, 827 .amux = EM28XX_AMUX_VIDEO, 828 }, { 829 .type = EM28XX_VMUX_COMPOSITE1, 830 .vmux = TVP5150_COMPOSITE1, 831 .amux = EM28XX_AMUX_LINE_IN, 832 }, { 833 .type = EM28XX_VMUX_SVIDEO, 834 .vmux = TVP5150_SVIDEO, 835 .amux = EM28XX_AMUX_LINE_IN, 836 } }, 837 }, 838 [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = { 839 .name = "Yakumo MovieMixer", 840 .tuner_type = TUNER_ABSENT, /* Capture only device */ 841 .decoder = EM28XX_TVP5150, 842 .input = { { 843 .type = EM28XX_VMUX_TELEVISION, 844 .vmux = TVP5150_COMPOSITE0, 845 .amux = EM28XX_AMUX_VIDEO, 846 }, { 847 .type = EM28XX_VMUX_COMPOSITE1, 848 .vmux = TVP5150_COMPOSITE1, 849 .amux = EM28XX_AMUX_LINE_IN, 850 }, { 851 .type = EM28XX_VMUX_SVIDEO, 852 .vmux = TVP5150_SVIDEO, 853 .amux = EM28XX_AMUX_LINE_IN, 854 } }, 855 }, 856 [EM2860_BOARD_TVP5150_REFERENCE_DESIGN] = { 857 .name = "EM2860/TVP5150 Reference Design", 858 .tuner_type = TUNER_ABSENT, /* Capture only device */ 859 .decoder = EM28XX_TVP5150, 860 .input = { { 861 .type = EM28XX_VMUX_COMPOSITE1, 862 .vmux = TVP5150_COMPOSITE1, 863 .amux = EM28XX_AMUX_LINE_IN, 864 }, { 865 .type = EM28XX_VMUX_SVIDEO, 866 .vmux = TVP5150_SVIDEO, 867 .amux = EM28XX_AMUX_LINE_IN, 868 } }, 869 }, 870 [EM2861_BOARD_PLEXTOR_PX_TV100U] = { 871 .name = "Plextor ConvertX PX-TV100U", 872 .tuner_type = TUNER_TNF_5335MF, 873 .xclk = EM28XX_XCLK_I2S_MSB_TIMING | 874 EM28XX_XCLK_FREQUENCY_12MHZ, 875 .tda9887_conf = TDA9887_PRESENT, 876 .decoder = EM28XX_TVP5150, 877 .has_msp34xx = 1, 878 .input = { { 879 .type = EM28XX_VMUX_TELEVISION, 880 .vmux = TVP5150_COMPOSITE0, 881 .amux = EM28XX_AMUX_LINE_IN, 882 .gpio = pinnacle_hybrid_pro_analog, 883 }, { 884 .type = EM28XX_VMUX_COMPOSITE1, 885 .vmux = TVP5150_COMPOSITE1, 886 .amux = EM28XX_AMUX_LINE_IN, 887 .gpio = pinnacle_hybrid_pro_analog, 888 }, { 889 .type = EM28XX_VMUX_SVIDEO, 890 .vmux = TVP5150_SVIDEO, 891 .amux = EM28XX_AMUX_LINE_IN, 892 .gpio = pinnacle_hybrid_pro_analog, 893 } }, 894 }, 895 896 /* Those boards with em2870 are DVB Only*/ 897 898 [EM2870_BOARD_TERRATEC_XS] = { 899 .name = "Terratec Cinergy T XS", 900 .valid = EM28XX_BOARD_NOT_VALIDATED, 901 .tuner_type = TUNER_XC2028, 902 .tuner_gpio = default_tuner_gpio, 903 }, 904 [EM2870_BOARD_TERRATEC_XS_MT2060] = { 905 .name = "Terratec Cinergy T XS (MT2060)", 906 .valid = EM28XX_BOARD_NOT_VALIDATED, 907 .tuner_type = TUNER_ABSENT, /* MT2060 */ 908 }, 909 [EM2870_BOARD_KWORLD_350U] = { 910 .name = "Kworld 350 U DVB-T", 911 .valid = EM28XX_BOARD_NOT_VALIDATED, 912 .tuner_type = TUNER_XC2028, 913 .tuner_gpio = default_tuner_gpio, 914 }, 915 [EM2870_BOARD_KWORLD_355U] = { 916 .name = "Kworld 355 U DVB-T", 917 .valid = EM28XX_BOARD_NOT_VALIDATED, 918 .tuner_type = TUNER_ABSENT, 919 .tuner_gpio = default_tuner_gpio, 920 .has_dvb = 1, 921 .dvb_gpio = default_digital, 922 }, 923 [EM2870_BOARD_PINNACLE_PCTV_DVB] = { 924 .name = "Pinnacle PCTV DVB-T", 925 .valid = EM28XX_BOARD_NOT_VALIDATED, 926 .tuner_type = TUNER_ABSENT, /* MT2060 */ 927 /* djh - I have serious doubts this is right... */ 928 .xclk = EM28XX_XCLK_IR_RC5_MODE | 929 EM28XX_XCLK_FREQUENCY_10MHZ, 930 }, 931 [EM2870_BOARD_COMPRO_VIDEOMATE] = { 932 .name = "Compro, VideoMate U3", 933 .valid = EM28XX_BOARD_NOT_VALIDATED, 934 .tuner_type = TUNER_ABSENT, /* MT2060 */ 935 }, 936 937 [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = { 938 .name = "Terratec Hybrid XS Secam", 939 .has_msp34xx = 1, 940 .tuner_type = TUNER_XC2028, 941 .tuner_gpio = default_tuner_gpio, 942 .decoder = EM28XX_TVP5150, 943 .has_dvb = 1, 944 .dvb_gpio = terratec_cinergy_USB_XS_FR_digital, 945 .input = { { 946 .type = EM28XX_VMUX_TELEVISION, 947 .vmux = TVP5150_COMPOSITE0, 948 .amux = EM28XX_AMUX_VIDEO, 949 .gpio = terratec_cinergy_USB_XS_FR_analog, 950 }, { 951 .type = EM28XX_VMUX_COMPOSITE1, 952 .vmux = TVP5150_COMPOSITE1, 953 .amux = EM28XX_AMUX_LINE_IN, 954 .gpio = terratec_cinergy_USB_XS_FR_analog, 955 }, { 956 .type = EM28XX_VMUX_SVIDEO, 957 .vmux = TVP5150_SVIDEO, 958 .amux = EM28XX_AMUX_LINE_IN, 959 .gpio = terratec_cinergy_USB_XS_FR_analog, 960 } }, 961 }, 962 [EM2884_BOARD_TERRATEC_H5] = { 963 .name = "Terratec Cinergy H5", 964 .has_dvb = 1, 965 #if 0 966 .tuner_type = TUNER_PHILIPS_TDA8290, 967 .tuner_addr = 0x41, 968 .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */ 969 .tuner_gpio = terratec_h5_gpio, 970 #else 971 .tuner_type = TUNER_ABSENT, 972 #endif 973 .def_i2c_bus = 1, 974 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 975 EM28XX_I2C_FREQ_400_KHZ, 976 }, 977 [EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = { 978 .name = "Hauppauge WinTV HVR 930C", 979 .has_dvb = 1, 980 #if 0 /* FIXME: Add analog support */ 981 .tuner_type = TUNER_XC5000, 982 .tuner_addr = 0x41, 983 .dvb_gpio = hauppauge_930c_digital, 984 .tuner_gpio = hauppauge_930c_gpio, 985 #else 986 .tuner_type = TUNER_ABSENT, 987 #endif 988 .ir_codes = RC_MAP_HAUPPAUGE, 989 .def_i2c_bus = 1, 990 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 991 EM28XX_I2C_FREQ_400_KHZ, 992 }, 993 [EM2884_BOARD_C3TECH_DIGITAL_DUO] = { 994 .name = "C3 Tech Digital Duo HDTV/SDTV USB", 995 .has_dvb = 1, 996 /* FIXME: Add analog support - need a saa7136 driver */ 997 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */ 998 .ir_codes = RC_MAP_EMPTY, 999 .def_i2c_bus = 1, 1000 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 1001 .dvb_gpio = c3tech_digital_duo_digital, 1002 }, 1003 [EM2884_BOARD_CINERGY_HTC_STICK] = { 1004 .name = "Terratec Cinergy HTC Stick", 1005 .has_dvb = 1, 1006 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, 1007 .tuner_type = TUNER_ABSENT, 1008 .def_i2c_bus = 1, 1009 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1010 EM28XX_I2C_FREQ_400_KHZ, 1011 }, 1012 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = { 1013 .name = "Hauppauge WinTV HVR 900", 1014 .tda9887_conf = TDA9887_PRESENT, 1015 .tuner_type = TUNER_XC2028, 1016 .tuner_gpio = default_tuner_gpio, 1017 .mts_firmware = 1, 1018 .has_dvb = 1, 1019 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1020 .ir_codes = RC_MAP_HAUPPAUGE, 1021 .decoder = EM28XX_TVP5150, 1022 .input = { { 1023 .type = EM28XX_VMUX_TELEVISION, 1024 .vmux = TVP5150_COMPOSITE0, 1025 .amux = EM28XX_AMUX_VIDEO, 1026 .gpio = hauppauge_wintv_hvr_900_analog, 1027 }, { 1028 .type = EM28XX_VMUX_COMPOSITE1, 1029 .vmux = TVP5150_COMPOSITE1, 1030 .amux = EM28XX_AMUX_LINE_IN, 1031 .gpio = hauppauge_wintv_hvr_900_analog, 1032 }, { 1033 .type = EM28XX_VMUX_SVIDEO, 1034 .vmux = TVP5150_SVIDEO, 1035 .amux = EM28XX_AMUX_LINE_IN, 1036 .gpio = hauppauge_wintv_hvr_900_analog, 1037 } }, 1038 }, 1039 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = { 1040 .name = "Hauppauge WinTV HVR 900 (R2)", 1041 .tda9887_conf = TDA9887_PRESENT, 1042 .tuner_type = TUNER_XC2028, 1043 .tuner_gpio = default_tuner_gpio, 1044 .mts_firmware = 1, 1045 .has_dvb = 1, 1046 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, 1047 .ir_codes = RC_MAP_HAUPPAUGE, 1048 .decoder = EM28XX_TVP5150, 1049 .input = { { 1050 .type = EM28XX_VMUX_TELEVISION, 1051 .vmux = TVP5150_COMPOSITE0, 1052 .amux = EM28XX_AMUX_VIDEO, 1053 .gpio = hauppauge_wintv_hvr_900_analog, 1054 }, { 1055 .type = EM28XX_VMUX_COMPOSITE1, 1056 .vmux = TVP5150_COMPOSITE1, 1057 .amux = EM28XX_AMUX_LINE_IN, 1058 .gpio = hauppauge_wintv_hvr_900_analog, 1059 }, { 1060 .type = EM28XX_VMUX_SVIDEO, 1061 .vmux = TVP5150_SVIDEO, 1062 .amux = EM28XX_AMUX_LINE_IN, 1063 .gpio = hauppauge_wintv_hvr_900_analog, 1064 } }, 1065 }, 1066 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = { 1067 .name = "Hauppauge WinTV HVR 850", 1068 .tuner_type = TUNER_XC2028, 1069 .tuner_gpio = default_tuner_gpio, 1070 .mts_firmware = 1, 1071 .has_dvb = 1, 1072 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1073 .ir_codes = RC_MAP_HAUPPAUGE, 1074 .decoder = EM28XX_TVP5150, 1075 .input = { { 1076 .type = EM28XX_VMUX_TELEVISION, 1077 .vmux = TVP5150_COMPOSITE0, 1078 .amux = EM28XX_AMUX_VIDEO, 1079 .gpio = hauppauge_wintv_hvr_900_analog, 1080 }, { 1081 .type = EM28XX_VMUX_COMPOSITE1, 1082 .vmux = TVP5150_COMPOSITE1, 1083 .amux = EM28XX_AMUX_LINE_IN, 1084 .gpio = hauppauge_wintv_hvr_900_analog, 1085 }, { 1086 .type = EM28XX_VMUX_SVIDEO, 1087 .vmux = TVP5150_SVIDEO, 1088 .amux = EM28XX_AMUX_LINE_IN, 1089 .gpio = hauppauge_wintv_hvr_900_analog, 1090 } }, 1091 }, 1092 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = { 1093 .name = "Hauppauge WinTV HVR 950", 1094 .tuner_type = TUNER_XC2028, 1095 .tuner_gpio = default_tuner_gpio, 1096 .mts_firmware = 1, 1097 .has_dvb = 1, 1098 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1099 .ir_codes = RC_MAP_HAUPPAUGE, 1100 .decoder = EM28XX_TVP5150, 1101 .input = { { 1102 .type = EM28XX_VMUX_TELEVISION, 1103 .vmux = TVP5150_COMPOSITE0, 1104 .amux = EM28XX_AMUX_VIDEO, 1105 .gpio = hauppauge_wintv_hvr_900_analog, 1106 }, { 1107 .type = EM28XX_VMUX_COMPOSITE1, 1108 .vmux = TVP5150_COMPOSITE1, 1109 .amux = EM28XX_AMUX_LINE_IN, 1110 .gpio = hauppauge_wintv_hvr_900_analog, 1111 }, { 1112 .type = EM28XX_VMUX_SVIDEO, 1113 .vmux = TVP5150_SVIDEO, 1114 .amux = EM28XX_AMUX_LINE_IN, 1115 .gpio = hauppauge_wintv_hvr_900_analog, 1116 } }, 1117 }, 1118 [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = { 1119 .name = "Pinnacle PCTV HD Pro Stick", 1120 .tuner_type = TUNER_XC2028, 1121 .tuner_gpio = default_tuner_gpio, 1122 .mts_firmware = 1, 1123 .has_dvb = 1, 1124 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1125 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 1126 .decoder = EM28XX_TVP5150, 1127 .input = { { 1128 .type = EM28XX_VMUX_TELEVISION, 1129 .vmux = TVP5150_COMPOSITE0, 1130 .amux = EM28XX_AMUX_VIDEO, 1131 .gpio = hauppauge_wintv_hvr_900_analog, 1132 }, { 1133 .type = EM28XX_VMUX_COMPOSITE1, 1134 .vmux = TVP5150_COMPOSITE1, 1135 .amux = EM28XX_AMUX_LINE_IN, 1136 .gpio = hauppauge_wintv_hvr_900_analog, 1137 }, { 1138 .type = EM28XX_VMUX_SVIDEO, 1139 .vmux = TVP5150_SVIDEO, 1140 .amux = EM28XX_AMUX_LINE_IN, 1141 .gpio = hauppauge_wintv_hvr_900_analog, 1142 } }, 1143 }, 1144 [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = { 1145 .name = "AMD ATI TV Wonder HD 600", 1146 .tuner_type = TUNER_XC2028, 1147 .tuner_gpio = default_tuner_gpio, 1148 .mts_firmware = 1, 1149 .has_dvb = 1, 1150 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1151 .ir_codes = RC_MAP_ATI_TV_WONDER_HD_600, 1152 .decoder = EM28XX_TVP5150, 1153 .input = { { 1154 .type = EM28XX_VMUX_TELEVISION, 1155 .vmux = TVP5150_COMPOSITE0, 1156 .amux = EM28XX_AMUX_VIDEO, 1157 .gpio = hauppauge_wintv_hvr_900_analog, 1158 }, { 1159 .type = EM28XX_VMUX_COMPOSITE1, 1160 .vmux = TVP5150_COMPOSITE1, 1161 .amux = EM28XX_AMUX_LINE_IN, 1162 .gpio = hauppauge_wintv_hvr_900_analog, 1163 }, { 1164 .type = EM28XX_VMUX_SVIDEO, 1165 .vmux = TVP5150_SVIDEO, 1166 .amux = EM28XX_AMUX_LINE_IN, 1167 .gpio = hauppauge_wintv_hvr_900_analog, 1168 } }, 1169 }, 1170 [EM2880_BOARD_TERRATEC_HYBRID_XS] = { 1171 .name = "Terratec Hybrid XS", 1172 .tuner_type = TUNER_XC2028, 1173 .tuner_gpio = default_tuner_gpio, 1174 .decoder = EM28XX_TVP5150, 1175 .has_dvb = 1, 1176 .dvb_gpio = default_digital, 1177 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS, 1178 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 1179 .input = { { 1180 .type = EM28XX_VMUX_TELEVISION, 1181 .vmux = TVP5150_COMPOSITE0, 1182 .amux = EM28XX_AMUX_VIDEO, 1183 .gpio = default_analog, 1184 }, { 1185 .type = EM28XX_VMUX_COMPOSITE1, 1186 .vmux = TVP5150_COMPOSITE1, 1187 .amux = EM28XX_AMUX_LINE_IN, 1188 .gpio = default_analog, 1189 }, { 1190 .type = EM28XX_VMUX_SVIDEO, 1191 .vmux = TVP5150_SVIDEO, 1192 .amux = EM28XX_AMUX_LINE_IN, 1193 .gpio = default_analog, 1194 } }, 1195 }, 1196 /* maybe there's a reason behind it why Terratec sells the Hybrid XS 1197 as Prodigy XS with a different PID, let's keep it separated for now 1198 maybe we'll need it lateron */ 1199 [EM2880_BOARD_TERRATEC_PRODIGY_XS] = { 1200 .name = "Terratec Prodigy XS", 1201 .tuner_type = TUNER_XC2028, 1202 .tuner_gpio = default_tuner_gpio, 1203 .decoder = EM28XX_TVP5150, 1204 .input = { { 1205 .type = EM28XX_VMUX_TELEVISION, 1206 .vmux = TVP5150_COMPOSITE0, 1207 .amux = EM28XX_AMUX_VIDEO, 1208 .gpio = hauppauge_wintv_hvr_900_analog, 1209 }, { 1210 .type = EM28XX_VMUX_COMPOSITE1, 1211 .vmux = TVP5150_COMPOSITE1, 1212 .amux = EM28XX_AMUX_LINE_IN, 1213 .gpio = hauppauge_wintv_hvr_900_analog, 1214 }, { 1215 .type = EM28XX_VMUX_SVIDEO, 1216 .vmux = TVP5150_SVIDEO, 1217 .amux = EM28XX_AMUX_LINE_IN, 1218 .gpio = hauppauge_wintv_hvr_900_analog, 1219 } }, 1220 }, 1221 [EM2820_BOARD_MSI_VOX_USB_2] = { 1222 .name = "MSI VOX USB 2.0", 1223 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1224 .tda9887_conf = TDA9887_PRESENT | 1225 TDA9887_PORT1_ACTIVE | 1226 TDA9887_PORT2_ACTIVE, 1227 .max_range_640_480 = 1, 1228 .decoder = EM28XX_SAA711X, 1229 .input = { { 1230 .type = EM28XX_VMUX_TELEVISION, 1231 .vmux = SAA7115_COMPOSITE4, 1232 .amux = EM28XX_AMUX_VIDEO, 1233 }, { 1234 .type = EM28XX_VMUX_COMPOSITE1, 1235 .vmux = SAA7115_COMPOSITE0, 1236 .amux = EM28XX_AMUX_LINE_IN, 1237 }, { 1238 .type = EM28XX_VMUX_SVIDEO, 1239 .vmux = SAA7115_SVIDEO3, 1240 .amux = EM28XX_AMUX_LINE_IN, 1241 } }, 1242 }, 1243 [EM2800_BOARD_TERRATEC_CINERGY_200] = { 1244 .name = "Terratec Cinergy 200 USB", 1245 .is_em2800 = 1, 1246 .has_ir_i2c = 1, 1247 .tuner_type = TUNER_LG_TALN, 1248 .tda9887_conf = TDA9887_PRESENT, 1249 .decoder = EM28XX_SAA711X, 1250 .input = { { 1251 .type = EM28XX_VMUX_TELEVISION, 1252 .vmux = SAA7115_COMPOSITE2, 1253 .amux = EM28XX_AMUX_VIDEO, 1254 }, { 1255 .type = EM28XX_VMUX_COMPOSITE1, 1256 .vmux = SAA7115_COMPOSITE0, 1257 .amux = EM28XX_AMUX_LINE_IN, 1258 }, { 1259 .type = EM28XX_VMUX_SVIDEO, 1260 .vmux = SAA7115_SVIDEO3, 1261 .amux = EM28XX_AMUX_LINE_IN, 1262 } }, 1263 }, 1264 [EM2800_BOARD_GRABBEEX_USB2800] = { 1265 .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder", 1266 .is_em2800 = 1, 1267 .decoder = EM28XX_SAA711X, 1268 .tuner_type = TUNER_ABSENT, /* capture only board */ 1269 .input = { { 1270 .type = EM28XX_VMUX_COMPOSITE1, 1271 .vmux = SAA7115_COMPOSITE0, 1272 .amux = EM28XX_AMUX_LINE_IN, 1273 }, { 1274 .type = EM28XX_VMUX_SVIDEO, 1275 .vmux = SAA7115_SVIDEO3, 1276 .amux = EM28XX_AMUX_LINE_IN, 1277 } }, 1278 }, 1279 [EM2800_BOARD_VC211A] = { 1280 .name = "Actionmaster/LinXcel/Digitus VC211A", 1281 .is_em2800 = 1, 1282 .tuner_type = TUNER_ABSENT, /* Capture-only board */ 1283 .decoder = EM28XX_SAA711X, 1284 .input = { { 1285 .type = EM28XX_VMUX_COMPOSITE1, 1286 .vmux = SAA7115_COMPOSITE0, 1287 .amux = EM28XX_AMUX_LINE_IN, 1288 .gpio = vc211a_enable, 1289 }, { 1290 .type = EM28XX_VMUX_SVIDEO, 1291 .vmux = SAA7115_SVIDEO3, 1292 .amux = EM28XX_AMUX_LINE_IN, 1293 .gpio = vc211a_enable, 1294 } }, 1295 }, 1296 [EM2800_BOARD_LEADTEK_WINFAST_USBII] = { 1297 .name = "Leadtek Winfast USB II", 1298 .is_em2800 = 1, 1299 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1300 .tda9887_conf = TDA9887_PRESENT, 1301 .decoder = EM28XX_SAA711X, 1302 .input = { { 1303 .type = EM28XX_VMUX_TELEVISION, 1304 .vmux = SAA7115_COMPOSITE2, 1305 .amux = EM28XX_AMUX_VIDEO, 1306 }, { 1307 .type = EM28XX_VMUX_COMPOSITE1, 1308 .vmux = SAA7115_COMPOSITE0, 1309 .amux = EM28XX_AMUX_LINE_IN, 1310 }, { 1311 .type = EM28XX_VMUX_SVIDEO, 1312 .vmux = SAA7115_SVIDEO3, 1313 .amux = EM28XX_AMUX_LINE_IN, 1314 } }, 1315 }, 1316 [EM2800_BOARD_KWORLD_USB2800] = { 1317 .name = "Kworld USB2800", 1318 .is_em2800 = 1, 1319 .tuner_type = TUNER_PHILIPS_FCV1236D, 1320 .tda9887_conf = TDA9887_PRESENT, 1321 .decoder = EM28XX_SAA711X, 1322 .input = { { 1323 .type = EM28XX_VMUX_TELEVISION, 1324 .vmux = SAA7115_COMPOSITE2, 1325 .amux = EM28XX_AMUX_VIDEO, 1326 }, { 1327 .type = EM28XX_VMUX_COMPOSITE1, 1328 .vmux = SAA7115_COMPOSITE0, 1329 .amux = EM28XX_AMUX_LINE_IN, 1330 }, { 1331 .type = EM28XX_VMUX_SVIDEO, 1332 .vmux = SAA7115_SVIDEO3, 1333 .amux = EM28XX_AMUX_LINE_IN, 1334 } }, 1335 }, 1336 [EM2820_BOARD_PINNACLE_DVC_90] = { 1337 .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker " 1338 "/ Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U", 1339 .tuner_type = TUNER_ABSENT, /* capture only board */ 1340 .decoder = EM28XX_SAA711X, 1341 .input = { { 1342 .type = EM28XX_VMUX_COMPOSITE1, 1343 .vmux = SAA7115_COMPOSITE0, 1344 .amux = EM28XX_AMUX_LINE_IN, 1345 }, { 1346 .type = EM28XX_VMUX_SVIDEO, 1347 .vmux = SAA7115_SVIDEO3, 1348 .amux = EM28XX_AMUX_LINE_IN, 1349 } }, 1350 }, 1351 [EM2800_BOARD_VGEAR_POCKETTV] = { 1352 .name = "V-Gear PocketTV", 1353 .is_em2800 = 1, 1354 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1355 .tda9887_conf = TDA9887_PRESENT, 1356 .decoder = EM28XX_SAA711X, 1357 .input = { { 1358 .type = EM28XX_VMUX_TELEVISION, 1359 .vmux = SAA7115_COMPOSITE2, 1360 .amux = EM28XX_AMUX_VIDEO, 1361 }, { 1362 .type = EM28XX_VMUX_COMPOSITE1, 1363 .vmux = SAA7115_COMPOSITE0, 1364 .amux = EM28XX_AMUX_LINE_IN, 1365 }, { 1366 .type = EM28XX_VMUX_SVIDEO, 1367 .vmux = SAA7115_SVIDEO3, 1368 .amux = EM28XX_AMUX_LINE_IN, 1369 } }, 1370 }, 1371 [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = { 1372 .name = "Pixelview PlayTV Box 4 USB 2.0", 1373 .tda9887_conf = TDA9887_PRESENT, 1374 .tuner_type = TUNER_YMEC_TVF_5533MF, 1375 .decoder = EM28XX_SAA711X, 1376 .input = { { 1377 .type = EM28XX_VMUX_TELEVISION, 1378 .vmux = SAA7115_COMPOSITE2, 1379 .amux = EM28XX_AMUX_VIDEO, 1380 .aout = EM28XX_AOUT_MONO | /* I2S */ 1381 EM28XX_AOUT_MASTER, /* Line out pin */ 1382 }, { 1383 .type = EM28XX_VMUX_COMPOSITE1, 1384 .vmux = SAA7115_COMPOSITE0, 1385 .amux = EM28XX_AMUX_LINE_IN, 1386 }, { 1387 .type = EM28XX_VMUX_SVIDEO, 1388 .vmux = SAA7115_SVIDEO3, 1389 .amux = EM28XX_AMUX_LINE_IN, 1390 } }, 1391 }, 1392 [EM2820_BOARD_PROLINK_PLAYTV_USB2] = { 1393 .name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0", 1394 .has_snapshot_button = 1, 1395 .tda9887_conf = TDA9887_PRESENT, 1396 .tuner_type = TUNER_YMEC_TVF_5533MF, 1397 .decoder = EM28XX_SAA711X, 1398 .input = { { 1399 .type = EM28XX_VMUX_TELEVISION, 1400 .vmux = SAA7115_COMPOSITE2, 1401 .amux = EM28XX_AMUX_VIDEO, 1402 .aout = EM28XX_AOUT_MONO | /* I2S */ 1403 EM28XX_AOUT_MASTER, /* Line out pin */ 1404 }, { 1405 .type = EM28XX_VMUX_COMPOSITE1, 1406 .vmux = SAA7115_COMPOSITE0, 1407 .amux = EM28XX_AMUX_LINE_IN, 1408 }, { 1409 .type = EM28XX_VMUX_SVIDEO, 1410 .vmux = SAA7115_SVIDEO3, 1411 .amux = EM28XX_AMUX_LINE_IN, 1412 } }, 1413 }, 1414 [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = { 1415 .name = "EM2860/SAA711X Reference Design", 1416 .has_snapshot_button = 1, 1417 .tuner_type = TUNER_ABSENT, 1418 .decoder = EM28XX_SAA711X, 1419 .input = { { 1420 .type = EM28XX_VMUX_SVIDEO, 1421 .vmux = SAA7115_SVIDEO3, 1422 }, { 1423 .type = EM28XX_VMUX_COMPOSITE1, 1424 .vmux = SAA7115_COMPOSITE0, 1425 } }, 1426 }, 1427 1428 [EM2874_BOARD_LEADERSHIP_ISDBT] = { 1429 .def_i2c_bus = 1, 1430 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1431 EM28XX_I2C_FREQ_100_KHZ, 1432 .xclk = EM28XX_XCLK_FREQUENCY_10MHZ, 1433 .name = "EM2874 Leadership ISDBT", 1434 .tuner_type = TUNER_ABSENT, 1435 .tuner_gpio = leadership_reset, 1436 .dvb_gpio = leadership_digital, 1437 .has_dvb = 1, 1438 }, 1439 1440 [EM2880_BOARD_MSI_DIGIVOX_AD] = { 1441 .name = "MSI DigiVox A/D", 1442 .valid = EM28XX_BOARD_NOT_VALIDATED, 1443 .tuner_type = TUNER_XC2028, 1444 .tuner_gpio = default_tuner_gpio, 1445 .decoder = EM28XX_TVP5150, 1446 .input = { { 1447 .type = EM28XX_VMUX_TELEVISION, 1448 .vmux = TVP5150_COMPOSITE0, 1449 .amux = EM28XX_AMUX_VIDEO, 1450 .gpio = em2880_msi_digivox_ad_analog, 1451 }, { 1452 .type = EM28XX_VMUX_COMPOSITE1, 1453 .vmux = TVP5150_COMPOSITE1, 1454 .amux = EM28XX_AMUX_LINE_IN, 1455 .gpio = em2880_msi_digivox_ad_analog, 1456 }, { 1457 .type = EM28XX_VMUX_SVIDEO, 1458 .vmux = TVP5150_SVIDEO, 1459 .amux = EM28XX_AMUX_LINE_IN, 1460 .gpio = em2880_msi_digivox_ad_analog, 1461 } }, 1462 }, 1463 [EM2880_BOARD_MSI_DIGIVOX_AD_II] = { 1464 .name = "MSI DigiVox A/D II", 1465 .valid = EM28XX_BOARD_NOT_VALIDATED, 1466 .tuner_type = TUNER_XC2028, 1467 .tuner_gpio = default_tuner_gpio, 1468 .decoder = EM28XX_TVP5150, 1469 .input = { { 1470 .type = EM28XX_VMUX_TELEVISION, 1471 .vmux = TVP5150_COMPOSITE0, 1472 .amux = EM28XX_AMUX_VIDEO, 1473 .gpio = em2880_msi_digivox_ad_analog, 1474 }, { 1475 .type = EM28XX_VMUX_COMPOSITE1, 1476 .vmux = TVP5150_COMPOSITE1, 1477 .amux = EM28XX_AMUX_LINE_IN, 1478 .gpio = em2880_msi_digivox_ad_analog, 1479 }, { 1480 .type = EM28XX_VMUX_SVIDEO, 1481 .vmux = TVP5150_SVIDEO, 1482 .amux = EM28XX_AMUX_LINE_IN, 1483 .gpio = em2880_msi_digivox_ad_analog, 1484 } }, 1485 }, 1486 [EM2880_BOARD_KWORLD_DVB_305U] = { 1487 .name = "KWorld DVB-T 305U", 1488 .tuner_type = TUNER_XC2028, 1489 .tuner_gpio = default_tuner_gpio, 1490 .decoder = EM28XX_TVP5150, 1491 .input = { { 1492 .type = EM28XX_VMUX_TELEVISION, 1493 .vmux = TVP5150_COMPOSITE0, 1494 .amux = EM28XX_AMUX_VIDEO, 1495 }, { 1496 .type = EM28XX_VMUX_COMPOSITE1, 1497 .vmux = TVP5150_COMPOSITE1, 1498 .amux = EM28XX_AMUX_LINE_IN, 1499 }, { 1500 .type = EM28XX_VMUX_SVIDEO, 1501 .vmux = TVP5150_SVIDEO, 1502 .amux = EM28XX_AMUX_LINE_IN, 1503 } }, 1504 }, 1505 [EM2880_BOARD_KWORLD_DVB_310U] = { 1506 .name = "KWorld DVB-T 310U", 1507 .tuner_type = TUNER_XC2028, 1508 .tuner_gpio = default_tuner_gpio, 1509 .has_dvb = 1, 1510 .dvb_gpio = default_digital, 1511 .mts_firmware = 1, 1512 .decoder = EM28XX_TVP5150, 1513 .input = { { 1514 .type = EM28XX_VMUX_TELEVISION, 1515 .vmux = TVP5150_COMPOSITE0, 1516 .amux = EM28XX_AMUX_VIDEO, 1517 .gpio = default_analog, 1518 }, { 1519 .type = EM28XX_VMUX_COMPOSITE1, 1520 .vmux = TVP5150_COMPOSITE1, 1521 .amux = EM28XX_AMUX_LINE_IN, 1522 .gpio = default_analog, 1523 }, { /* S-video has not been tested yet */ 1524 .type = EM28XX_VMUX_SVIDEO, 1525 .vmux = TVP5150_SVIDEO, 1526 .amux = EM28XX_AMUX_LINE_IN, 1527 .gpio = default_analog, 1528 } }, 1529 }, 1530 [EM2882_BOARD_KWORLD_ATSC_315U] = { 1531 .name = "KWorld ATSC 315U HDTV TV Box", 1532 .valid = EM28XX_BOARD_NOT_VALIDATED, 1533 .tuner_type = TUNER_THOMSON_DTT761X, 1534 .tuner_gpio = em2882_kworld_315u_tuner_gpio, 1535 .tda9887_conf = TDA9887_PRESENT, 1536 .decoder = EM28XX_SAA711X, 1537 .has_dvb = 1, 1538 .dvb_gpio = em2882_kworld_315u_digital, 1539 .ir_codes = RC_MAP_KWORLD_315U, 1540 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1541 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 1542 /* Analog mode - still not ready */ 1543 /*.input = { { 1544 .type = EM28XX_VMUX_TELEVISION, 1545 .vmux = SAA7115_COMPOSITE2, 1546 .amux = EM28XX_AMUX_VIDEO, 1547 .gpio = em2882_kworld_315u_analog, 1548 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1549 }, { 1550 .type = EM28XX_VMUX_COMPOSITE1, 1551 .vmux = SAA7115_COMPOSITE0, 1552 .amux = EM28XX_AMUX_LINE_IN, 1553 .gpio = em2882_kworld_315u_analog1, 1554 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1555 }, { 1556 .type = EM28XX_VMUX_SVIDEO, 1557 .vmux = SAA7115_SVIDEO3, 1558 .amux = EM28XX_AMUX_LINE_IN, 1559 .gpio = em2882_kworld_315u_analog1, 1560 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1561 } }, */ 1562 }, 1563 [EM2880_BOARD_EMPIRE_DUAL_TV] = { 1564 .name = "Empire dual TV", 1565 .tuner_type = TUNER_XC2028, 1566 .tuner_gpio = default_tuner_gpio, 1567 .has_dvb = 1, 1568 .dvb_gpio = default_digital, 1569 .mts_firmware = 1, 1570 .decoder = EM28XX_TVP5150, 1571 .input = { { 1572 .type = EM28XX_VMUX_TELEVISION, 1573 .vmux = TVP5150_COMPOSITE0, 1574 .amux = EM28XX_AMUX_VIDEO, 1575 .gpio = default_analog, 1576 }, { 1577 .type = EM28XX_VMUX_COMPOSITE1, 1578 .vmux = TVP5150_COMPOSITE1, 1579 .amux = EM28XX_AMUX_LINE_IN, 1580 .gpio = default_analog, 1581 }, { 1582 .type = EM28XX_VMUX_SVIDEO, 1583 .vmux = TVP5150_SVIDEO, 1584 .amux = EM28XX_AMUX_LINE_IN, 1585 .gpio = default_analog, 1586 } }, 1587 }, 1588 [EM2881_BOARD_DNT_DA2_HYBRID] = { 1589 .name = "DNT DA2 Hybrid", 1590 .valid = EM28XX_BOARD_NOT_VALIDATED, 1591 .tuner_type = TUNER_XC2028, 1592 .tuner_gpio = default_tuner_gpio, 1593 .decoder = EM28XX_TVP5150, 1594 .input = { { 1595 .type = EM28XX_VMUX_TELEVISION, 1596 .vmux = TVP5150_COMPOSITE0, 1597 .amux = EM28XX_AMUX_VIDEO, 1598 .gpio = default_analog, 1599 }, { 1600 .type = EM28XX_VMUX_COMPOSITE1, 1601 .vmux = TVP5150_COMPOSITE1, 1602 .amux = EM28XX_AMUX_LINE_IN, 1603 .gpio = default_analog, 1604 }, { 1605 .type = EM28XX_VMUX_SVIDEO, 1606 .vmux = TVP5150_SVIDEO, 1607 .amux = EM28XX_AMUX_LINE_IN, 1608 .gpio = default_analog, 1609 } }, 1610 }, 1611 [EM2881_BOARD_PINNACLE_HYBRID_PRO] = { 1612 .name = "Pinnacle Hybrid Pro", 1613 .tuner_type = TUNER_XC2028, 1614 .tuner_gpio = default_tuner_gpio, 1615 .decoder = EM28XX_TVP5150, 1616 .has_dvb = 1, 1617 .dvb_gpio = pinnacle_hybrid_pro_digital, 1618 .input = { { 1619 .type = EM28XX_VMUX_TELEVISION, 1620 .vmux = TVP5150_COMPOSITE0, 1621 .amux = EM28XX_AMUX_VIDEO, 1622 .gpio = pinnacle_hybrid_pro_analog, 1623 }, { 1624 .type = EM28XX_VMUX_COMPOSITE1, 1625 .vmux = TVP5150_COMPOSITE1, 1626 .amux = EM28XX_AMUX_LINE_IN, 1627 .gpio = pinnacle_hybrid_pro_analog, 1628 }, { 1629 .type = EM28XX_VMUX_SVIDEO, 1630 .vmux = TVP5150_SVIDEO, 1631 .amux = EM28XX_AMUX_LINE_IN, 1632 .gpio = pinnacle_hybrid_pro_analog, 1633 } }, 1634 }, 1635 [EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = { 1636 .name = "Pinnacle Hybrid Pro (330e)", 1637 .tuner_type = TUNER_XC2028, 1638 .tuner_gpio = default_tuner_gpio, 1639 .mts_firmware = 1, 1640 .has_dvb = 1, 1641 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, 1642 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 1643 .decoder = EM28XX_TVP5150, 1644 .input = { { 1645 .type = EM28XX_VMUX_TELEVISION, 1646 .vmux = TVP5150_COMPOSITE0, 1647 .amux = EM28XX_AMUX_VIDEO, 1648 .gpio = hauppauge_wintv_hvr_900_analog, 1649 }, { 1650 .type = EM28XX_VMUX_COMPOSITE1, 1651 .vmux = TVP5150_COMPOSITE1, 1652 .amux = EM28XX_AMUX_LINE_IN, 1653 .gpio = hauppauge_wintv_hvr_900_analog, 1654 }, { 1655 .type = EM28XX_VMUX_SVIDEO, 1656 .vmux = TVP5150_SVIDEO, 1657 .amux = EM28XX_AMUX_LINE_IN, 1658 .gpio = hauppauge_wintv_hvr_900_analog, 1659 } }, 1660 }, 1661 [EM2882_BOARD_KWORLD_VS_DVBT] = { 1662 .name = "Kworld VS-DVB-T 323UR", 1663 .tuner_type = TUNER_XC2028, 1664 .tuner_gpio = default_tuner_gpio, 1665 .decoder = EM28XX_TVP5150, 1666 .mts_firmware = 1, 1667 .has_dvb = 1, 1668 .dvb_gpio = kworld_330u_digital, 1669 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 1670 .ir_codes = RC_MAP_KWORLD_315U, 1671 .input = { { 1672 .type = EM28XX_VMUX_TELEVISION, 1673 .vmux = TVP5150_COMPOSITE0, 1674 .amux = EM28XX_AMUX_VIDEO, 1675 }, { 1676 .type = EM28XX_VMUX_COMPOSITE1, 1677 .vmux = TVP5150_COMPOSITE1, 1678 .amux = EM28XX_AMUX_LINE_IN, 1679 }, { 1680 .type = EM28XX_VMUX_SVIDEO, 1681 .vmux = TVP5150_SVIDEO, 1682 .amux = EM28XX_AMUX_LINE_IN, 1683 } }, 1684 }, 1685 [EM2882_BOARD_TERRATEC_HYBRID_XS] = { 1686 .name = "Terratec Cinnergy Hybrid T USB XS (em2882)", 1687 .tuner_type = TUNER_XC2028, 1688 .tuner_gpio = default_tuner_gpio, 1689 .mts_firmware = 1, 1690 .decoder = EM28XX_TVP5150, 1691 .has_dvb = 1, 1692 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1693 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS, 1694 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1695 .input = { { 1696 .type = EM28XX_VMUX_TELEVISION, 1697 .vmux = TVP5150_COMPOSITE0, 1698 .amux = EM28XX_AMUX_VIDEO, 1699 .gpio = hauppauge_wintv_hvr_900_analog, 1700 }, { 1701 .type = EM28XX_VMUX_COMPOSITE1, 1702 .vmux = TVP5150_COMPOSITE1, 1703 .amux = EM28XX_AMUX_LINE_IN, 1704 .gpio = hauppauge_wintv_hvr_900_analog, 1705 }, { 1706 .type = EM28XX_VMUX_SVIDEO, 1707 .vmux = TVP5150_SVIDEO, 1708 .amux = EM28XX_AMUX_LINE_IN, 1709 .gpio = hauppauge_wintv_hvr_900_analog, 1710 } }, 1711 }, 1712 [EM2882_BOARD_DIKOM_DK300] = { 1713 .name = "Dikom DK300", 1714 .tuner_type = TUNER_XC2028, 1715 .tuner_gpio = default_tuner_gpio, 1716 .decoder = EM28XX_TVP5150, 1717 .mts_firmware = 1, 1718 .has_dvb = 1, 1719 .dvb_gpio = dikom_dk300_digital, 1720 .input = { { 1721 .type = EM28XX_VMUX_TELEVISION, 1722 .vmux = TVP5150_COMPOSITE0, 1723 .amux = EM28XX_AMUX_VIDEO, 1724 .gpio = default_analog, 1725 } }, 1726 }, 1727 [EM2883_BOARD_KWORLD_HYBRID_330U] = { 1728 .name = "Kworld PlusTV HD Hybrid 330", 1729 .tuner_type = TUNER_XC2028, 1730 .tuner_gpio = default_tuner_gpio, 1731 .decoder = EM28XX_TVP5150, 1732 .mts_firmware = 1, 1733 .has_dvb = 1, 1734 .dvb_gpio = kworld_330u_digital, 1735 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1736 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1737 EM28XX_I2C_EEPROM_ON_BOARD | 1738 EM28XX_I2C_EEPROM_KEY_VALID, 1739 .input = { { 1740 .type = EM28XX_VMUX_TELEVISION, 1741 .vmux = TVP5150_COMPOSITE0, 1742 .amux = EM28XX_AMUX_VIDEO, 1743 .gpio = kworld_330u_analog, 1744 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1745 }, { 1746 .type = EM28XX_VMUX_COMPOSITE1, 1747 .vmux = TVP5150_COMPOSITE1, 1748 .amux = EM28XX_AMUX_LINE_IN, 1749 .gpio = kworld_330u_analog, 1750 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1751 }, { 1752 .type = EM28XX_VMUX_SVIDEO, 1753 .vmux = TVP5150_SVIDEO, 1754 .amux = EM28XX_AMUX_LINE_IN, 1755 .gpio = kworld_330u_analog, 1756 } }, 1757 }, 1758 [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = { 1759 .name = "Compro VideoMate ForYou/Stereo", 1760 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1761 .tvaudio_addr = 0xb0, 1762 .tda9887_conf = TDA9887_PRESENT, 1763 .decoder = EM28XX_TVP5150, 1764 .adecoder = EM28XX_TVAUDIO, 1765 .mute_gpio = compro_mute_gpio, 1766 .input = { { 1767 .type = EM28XX_VMUX_TELEVISION, 1768 .vmux = TVP5150_COMPOSITE0, 1769 .amux = EM28XX_AMUX_VIDEO, 1770 .gpio = compro_unmute_tv_gpio, 1771 }, { 1772 .type = EM28XX_VMUX_SVIDEO, 1773 .vmux = TVP5150_SVIDEO, 1774 .amux = EM28XX_AMUX_LINE_IN, 1775 .gpio = compro_unmute_svid_gpio, 1776 } }, 1777 }, 1778 [EM2860_BOARD_KAIOMY_TVNPC_U2] = { 1779 .name = "Kaiomy TVnPC U2", 1780 .vchannels = 3, 1781 .tuner_type = TUNER_XC2028, 1782 .tuner_addr = 0x61, 1783 .mts_firmware = 1, 1784 .decoder = EM28XX_TVP5150, 1785 .tuner_gpio = default_tuner_gpio, 1786 .ir_codes = RC_MAP_KAIOMY, 1787 .input = { { 1788 .type = EM28XX_VMUX_TELEVISION, 1789 .vmux = TVP5150_COMPOSITE0, 1790 .amux = EM28XX_AMUX_VIDEO, 1791 1792 }, { 1793 .type = EM28XX_VMUX_COMPOSITE1, 1794 .vmux = TVP5150_COMPOSITE1, 1795 .amux = EM28XX_AMUX_LINE_IN, 1796 }, { 1797 .type = EM28XX_VMUX_SVIDEO, 1798 .vmux = TVP5150_SVIDEO, 1799 .amux = EM28XX_AMUX_LINE_IN, 1800 } }, 1801 .radio = { 1802 .type = EM28XX_RADIO, 1803 .amux = EM28XX_AMUX_LINE_IN, 1804 } 1805 }, 1806 [EM2860_BOARD_EASYCAP] = { 1807 .name = "Easy Cap Capture DC-60", 1808 .vchannels = 2, 1809 .tuner_type = TUNER_ABSENT, 1810 .decoder = EM28XX_SAA711X, 1811 .input = { { 1812 .type = EM28XX_VMUX_COMPOSITE1, 1813 .vmux = SAA7115_COMPOSITE0, 1814 .amux = EM28XX_AMUX_LINE_IN, 1815 }, { 1816 .type = EM28XX_VMUX_SVIDEO, 1817 .vmux = SAA7115_SVIDEO3, 1818 .amux = EM28XX_AMUX_LINE_IN, 1819 } }, 1820 }, 1821 [EM2820_BOARD_IODATA_GVMVP_SZ] = { 1822 .name = "IO-DATA GV-MVP/SZ", 1823 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 1824 .tuner_gpio = default_tuner_gpio, 1825 .tda9887_conf = TDA9887_PRESENT, 1826 .decoder = EM28XX_TVP5150, 1827 .input = { { 1828 .type = EM28XX_VMUX_TELEVISION, 1829 .vmux = TVP5150_COMPOSITE0, 1830 .amux = EM28XX_AMUX_VIDEO, 1831 }, { /* Composite has not been tested yet */ 1832 .type = EM28XX_VMUX_COMPOSITE1, 1833 .vmux = TVP5150_COMPOSITE1, 1834 .amux = EM28XX_AMUX_VIDEO, 1835 }, { /* S-video has not been tested yet */ 1836 .type = EM28XX_VMUX_SVIDEO, 1837 .vmux = TVP5150_SVIDEO, 1838 .amux = EM28XX_AMUX_VIDEO, 1839 } }, 1840 }, 1841 [EM2860_BOARD_TERRATEC_GRABBY] = { 1842 .name = "Terratec Grabby", 1843 .vchannels = 2, 1844 .tuner_type = TUNER_ABSENT, 1845 .decoder = EM28XX_SAA711X, 1846 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1847 .input = { { 1848 .type = EM28XX_VMUX_COMPOSITE1, 1849 .vmux = SAA7115_COMPOSITE0, 1850 .amux = EM28XX_AMUX_LINE_IN, 1851 }, { 1852 .type = EM28XX_VMUX_SVIDEO, 1853 .vmux = SAA7115_SVIDEO3, 1854 .amux = EM28XX_AMUX_LINE_IN, 1855 } }, 1856 }, 1857 [EM2860_BOARD_TERRATEC_AV350] = { 1858 .name = "Terratec AV350", 1859 .vchannels = 2, 1860 .tuner_type = TUNER_ABSENT, 1861 .decoder = EM28XX_TVP5150, 1862 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1863 .mute_gpio = terratec_av350_mute_gpio, 1864 .input = { { 1865 .type = EM28XX_VMUX_COMPOSITE1, 1866 .vmux = TVP5150_COMPOSITE1, 1867 .amux = EM28XX_AUDIO_SRC_LINE, 1868 .gpio = terratec_av350_unmute_gpio, 1869 1870 }, { 1871 .type = EM28XX_VMUX_SVIDEO, 1872 .vmux = TVP5150_SVIDEO, 1873 .amux = EM28XX_AUDIO_SRC_LINE, 1874 .gpio = terratec_av350_unmute_gpio, 1875 } }, 1876 }, 1877 1878 [EM2860_BOARD_ELGATO_VIDEO_CAPTURE] = { 1879 .name = "Elgato Video Capture", 1880 .decoder = EM28XX_SAA711X, 1881 .tuner_type = TUNER_ABSENT, /* Capture only device */ 1882 .input = { { 1883 .type = EM28XX_VMUX_COMPOSITE1, 1884 .vmux = SAA7115_COMPOSITE0, 1885 .amux = EM28XX_AMUX_LINE_IN, 1886 }, { 1887 .type = EM28XX_VMUX_SVIDEO, 1888 .vmux = SAA7115_SVIDEO3, 1889 .amux = EM28XX_AMUX_LINE_IN, 1890 } }, 1891 }, 1892 1893 [EM2882_BOARD_EVGA_INDTUBE] = { 1894 .name = "Evga inDtube", 1895 .tuner_type = TUNER_XC2028, 1896 .tuner_gpio = default_tuner_gpio, 1897 .decoder = EM28XX_TVP5150, 1898 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 1899 .mts_firmware = 1, 1900 .has_dvb = 1, 1901 .dvb_gpio = evga_indtube_digital, 1902 .ir_codes = RC_MAP_EVGA_INDTUBE, 1903 .input = { { 1904 .type = EM28XX_VMUX_TELEVISION, 1905 .vmux = TVP5150_COMPOSITE0, 1906 .amux = EM28XX_AMUX_VIDEO, 1907 .gpio = evga_indtube_analog, 1908 }, { 1909 .type = EM28XX_VMUX_COMPOSITE1, 1910 .vmux = TVP5150_COMPOSITE1, 1911 .amux = EM28XX_AMUX_LINE_IN, 1912 .gpio = evga_indtube_analog, 1913 }, { 1914 .type = EM28XX_VMUX_SVIDEO, 1915 .vmux = TVP5150_SVIDEO, 1916 .amux = EM28XX_AMUX_LINE_IN, 1917 .gpio = evga_indtube_analog, 1918 } }, 1919 }, 1920 /* eb1a:2868 Empia EM2870 + Philips CU1216L NIM (Philips TDA10023 + 1921 Infineon TUA6034) */ 1922 [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = { 1923 .name = "Reddo DVB-C USB TV Box", 1924 .tuner_type = TUNER_ABSENT, 1925 .tuner_gpio = reddo_dvb_c_usb_box, 1926 .has_dvb = 1, 1927 }, 1928 /* 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold 1929 * initially as the KWorld PlusTV 340U, then as the UB435-Q. 1930 * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 */ 1931 [EM2870_BOARD_KWORLD_A340] = { 1932 .name = "KWorld PlusTV 340U or UB435-Q (ATSC)", 1933 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */ 1934 .has_dvb = 1, 1935 .dvb_gpio = kworld_a340_digital, 1936 .tuner_gpio = default_tuner_gpio, 1937 }, 1938 /* 2013:024f PCTV nanoStick T2 290e. 1939 * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 */ 1940 [EM28174_BOARD_PCTV_290E] = { 1941 .name = "PCTV nanoStick T2 290e", 1942 .def_i2c_bus = 1, 1943 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ, 1944 .tuner_type = TUNER_ABSENT, 1945 .tuner_gpio = pctv_290e, 1946 .has_dvb = 1, 1947 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 1948 }, 1949 /* 2013:024f PCTV DVB-S2 Stick 460e 1950 * Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293 */ 1951 [EM28174_BOARD_PCTV_460E] = { 1952 .def_i2c_bus = 1, 1953 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, 1954 .name = "PCTV DVB-S2 Stick (460e)", 1955 .tuner_type = TUNER_ABSENT, 1956 .tuner_gpio = pctv_460e, 1957 .has_dvb = 1, 1958 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 1959 }, 1960 /* eb1a:5006 Honestech VIDBOX NW03 1961 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner */ 1962 [EM2860_BOARD_HT_VIDBOX_NW03] = { 1963 .name = "Honestech Vidbox NW03", 1964 .tuner_type = TUNER_ABSENT, 1965 .decoder = EM28XX_SAA711X, 1966 .input = { { 1967 .type = EM28XX_VMUX_COMPOSITE1, 1968 .vmux = SAA7115_COMPOSITE0, 1969 .amux = EM28XX_AMUX_LINE_IN, 1970 }, { 1971 .type = EM28XX_VMUX_SVIDEO, 1972 .vmux = SAA7115_SVIDEO3, /* S-VIDEO needs confirming */ 1973 .amux = EM28XX_AMUX_LINE_IN, 1974 } }, 1975 }, 1976 /* 1b80:e425 MaxMedia UB425-TC 1977 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 */ 1978 [EM2874_BOARD_MAXMEDIA_UB425_TC] = { 1979 .name = "MaxMedia UB425-TC", 1980 .tuner_type = TUNER_ABSENT, 1981 .tuner_gpio = maxmedia_ub425_tc, 1982 .has_dvb = 1, 1983 .ir_codes = RC_MAP_REDDO, 1984 .def_i2c_bus = 1, 1985 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1986 EM28XX_I2C_FREQ_400_KHZ, 1987 }, 1988 /* 2304:0242 PCTV QuatroStick (510e) 1989 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */ 1990 [EM2884_BOARD_PCTV_510E] = { 1991 .name = "PCTV QuatroStick (510e)", 1992 .tuner_type = TUNER_ABSENT, 1993 .tuner_gpio = pctv_510e, 1994 .has_dvb = 1, 1995 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 1996 .def_i2c_bus = 1, 1997 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1998 EM28XX_I2C_FREQ_400_KHZ, 1999 }, 2000 /* 2013:0251 PCTV QuatroStick nano (520e) 2001 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */ 2002 [EM2884_BOARD_PCTV_520E] = { 2003 .name = "PCTV QuatroStick nano (520e)", 2004 .tuner_type = TUNER_ABSENT, 2005 .tuner_gpio = pctv_520e, 2006 .has_dvb = 1, 2007 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2008 .def_i2c_bus = 1, 2009 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2010 EM28XX_I2C_FREQ_400_KHZ, 2011 }, 2012 [EM2884_BOARD_TERRATEC_HTC_USB_XS] = { 2013 .name = "Terratec Cinergy HTC USB XS", 2014 .has_dvb = 1, 2015 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, 2016 .tuner_type = TUNER_ABSENT, 2017 .def_i2c_bus = 1, 2018 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2019 EM28XX_I2C_FREQ_400_KHZ, 2020 }, 2021 /* 1b80:e1cc Delock 61959 2022 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 2023 * mostly the same as MaxMedia UB-425-TC but different remote */ 2024 [EM2874_BOARD_DELOCK_61959] = { 2025 .name = "Delock 61959", 2026 .tuner_type = TUNER_ABSENT, 2027 .tuner_gpio = maxmedia_ub425_tc, 2028 .has_dvb = 1, 2029 .ir_codes = RC_MAP_DELOCK_61959, 2030 .def_i2c_bus = 1, 2031 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2032 EM28XX_I2C_FREQ_400_KHZ, 2033 }, 2034 /* 2035 * 1b80:e346 KWorld USB ATSC TV Stick UB435-Q V2 2036 * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2 2037 */ 2038 [EM2874_BOARD_KWORLD_UB435Q_V2] = { 2039 .name = "KWorld USB ATSC TV Stick UB435-Q V2", 2040 .tuner_type = TUNER_ABSENT, 2041 .has_dvb = 1, 2042 .dvb_gpio = kworld_a340_digital, 2043 .tuner_gpio = default_tuner_gpio, 2044 .def_i2c_bus = 1, 2045 }, 2046 }; 2047 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); 2048 2049 /* table of devices that work with this driver */ 2050 struct usb_device_id em28xx_id_table[] = { 2051 { USB_DEVICE(0xeb1a, 0x2750), 2052 .driver_info = EM2750_BOARD_UNKNOWN }, 2053 { USB_DEVICE(0xeb1a, 0x2751), 2054 .driver_info = EM2750_BOARD_UNKNOWN }, 2055 { USB_DEVICE(0xeb1a, 0x2800), 2056 .driver_info = EM2800_BOARD_UNKNOWN }, 2057 { USB_DEVICE(0xeb1a, 0x2710), 2058 .driver_info = EM2820_BOARD_UNKNOWN }, 2059 { USB_DEVICE(0xeb1a, 0x2820), 2060 .driver_info = EM2820_BOARD_UNKNOWN }, 2061 { USB_DEVICE(0xeb1a, 0x2821), 2062 .driver_info = EM2820_BOARD_UNKNOWN }, 2063 { USB_DEVICE(0xeb1a, 0x2860), 2064 .driver_info = EM2820_BOARD_UNKNOWN }, 2065 { USB_DEVICE(0xeb1a, 0x2861), 2066 .driver_info = EM2820_BOARD_UNKNOWN }, 2067 { USB_DEVICE(0xeb1a, 0x2862), 2068 .driver_info = EM2820_BOARD_UNKNOWN }, 2069 { USB_DEVICE(0xeb1a, 0x2863), 2070 .driver_info = EM2820_BOARD_UNKNOWN }, 2071 { USB_DEVICE(0xeb1a, 0x2870), 2072 .driver_info = EM2820_BOARD_UNKNOWN }, 2073 { USB_DEVICE(0xeb1a, 0x2881), 2074 .driver_info = EM2820_BOARD_UNKNOWN }, 2075 { USB_DEVICE(0xeb1a, 0x2883), 2076 .driver_info = EM2820_BOARD_UNKNOWN }, 2077 { USB_DEVICE(0xeb1a, 0x2868), 2078 .driver_info = EM2820_BOARD_UNKNOWN }, 2079 { USB_DEVICE(0xeb1a, 0x2875), 2080 .driver_info = EM2820_BOARD_UNKNOWN }, 2081 { USB_DEVICE(0xeb1a, 0xe300), 2082 .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U }, 2083 { USB_DEVICE(0xeb1a, 0xe303), 2084 .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 }, 2085 { USB_DEVICE(0xeb1a, 0xe305), 2086 .driver_info = EM2880_BOARD_KWORLD_DVB_305U }, 2087 { USB_DEVICE(0xeb1a, 0xe310), 2088 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD }, 2089 { USB_DEVICE(0xeb1a, 0xa313), 2090 .driver_info = EM2882_BOARD_KWORLD_ATSC_315U }, 2091 { USB_DEVICE(0xeb1a, 0xa316), 2092 .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U }, 2093 { USB_DEVICE(0xeb1a, 0xe320), 2094 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II }, 2095 { USB_DEVICE(0xeb1a, 0xe323), 2096 .driver_info = EM2882_BOARD_KWORLD_VS_DVBT }, 2097 { USB_DEVICE(0xeb1a, 0xe350), 2098 .driver_info = EM2870_BOARD_KWORLD_350U }, 2099 { USB_DEVICE(0xeb1a, 0xe355), 2100 .driver_info = EM2870_BOARD_KWORLD_355U }, 2101 { USB_DEVICE(0xeb1a, 0x2801), 2102 .driver_info = EM2800_BOARD_GRABBEEX_USB2800 }, 2103 { USB_DEVICE(0xeb1a, 0xe357), 2104 .driver_info = EM2870_BOARD_KWORLD_355U }, 2105 { USB_DEVICE(0xeb1a, 0xe359), 2106 .driver_info = EM2870_BOARD_KWORLD_355U }, 2107 { USB_DEVICE(0x1b80, 0xe302), 2108 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */ 2109 { USB_DEVICE(0x1b80, 0xe304), 2110 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kworld DVD Maker 2 */ 2111 { USB_DEVICE(0x0ccd, 0x0036), 2112 .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 }, 2113 { USB_DEVICE(0x0ccd, 0x004c), 2114 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR }, 2115 { USB_DEVICE(0x0ccd, 0x004f), 2116 .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS }, 2117 { USB_DEVICE(0x0ccd, 0x005e), 2118 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, 2119 { USB_DEVICE(0x0ccd, 0x0042), 2120 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, 2121 { USB_DEVICE(0x0ccd, 0x0043), 2122 .driver_info = EM2870_BOARD_TERRATEC_XS }, 2123 { USB_DEVICE(0x0ccd, 0x008e), /* Cinergy HTC USB XS Rev. 1 */ 2124 .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS }, 2125 { USB_DEVICE(0x0ccd, 0x00ac), /* Cinergy HTC USB XS Rev. 2 */ 2126 .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS }, 2127 { USB_DEVICE(0x0ccd, 0x10a2), /* H5 Rev. 1 */ 2128 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2129 { USB_DEVICE(0x0ccd, 0x10ad), /* H5 Rev. 2 */ 2130 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2131 { USB_DEVICE(0x0ccd, 0x10b6), /* H5 Rev. 3 */ 2132 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2133 { USB_DEVICE(0x0ccd, 0x0084), 2134 .driver_info = EM2860_BOARD_TERRATEC_AV350 }, 2135 { USB_DEVICE(0x0ccd, 0x0096), 2136 .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, 2137 { USB_DEVICE(0x0ccd, 0x10AF), 2138 .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, 2139 { USB_DEVICE(0x0ccd, 0x00b2), 2140 .driver_info = EM2884_BOARD_CINERGY_HTC_STICK }, 2141 { USB_DEVICE(0x0fd9, 0x0033), 2142 .driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE}, 2143 { USB_DEVICE(0x185b, 0x2870), 2144 .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE }, 2145 { USB_DEVICE(0x185b, 0x2041), 2146 .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU }, 2147 { USB_DEVICE(0x2040, 0x4200), 2148 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, 2149 { USB_DEVICE(0x2040, 0x4201), 2150 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, 2151 { USB_DEVICE(0x2040, 0x6500), 2152 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 }, 2153 { USB_DEVICE(0x2040, 0x6502), 2154 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 }, 2155 { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */ 2156 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2157 { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */ 2158 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2159 { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */ 2160 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2161 { USB_DEVICE(0x2040, 0x651f), 2162 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 }, 2163 { USB_DEVICE(0x0438, 0xb002), 2164 .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 }, 2165 { USB_DEVICE(0x2001, 0xf112), 2166 .driver_info = EM2820_BOARD_DLINK_USB_TV }, 2167 { USB_DEVICE(0x2304, 0x0207), 2168 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2169 { USB_DEVICE(0x2304, 0x0208), 2170 .driver_info = EM2820_BOARD_PINNACLE_USB_2 }, 2171 { USB_DEVICE(0x2304, 0x021a), 2172 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2173 { USB_DEVICE(0x2304, 0x0226), 2174 .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E }, 2175 { USB_DEVICE(0x2304, 0x0227), 2176 .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO }, 2177 { USB_DEVICE(0x0413, 0x6023), 2178 .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII }, 2179 { USB_DEVICE(0x093b, 0xa003), 2180 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2181 { USB_DEVICE(0x093b, 0xa005), 2182 .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U }, 2183 { USB_DEVICE(0x04bb, 0x0515), 2184 .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ }, 2185 { USB_DEVICE(0xeb1a, 0x50a6), 2186 .driver_info = EM2860_BOARD_GADMEI_UTV330 }, 2187 { USB_DEVICE(0x1b80, 0xa340), 2188 .driver_info = EM2870_BOARD_KWORLD_A340 }, 2189 { USB_DEVICE(0x1b80, 0xe346), 2190 .driver_info = EM2874_BOARD_KWORLD_UB435Q_V2 }, 2191 { USB_DEVICE(0x2013, 0x024f), 2192 .driver_info = EM28174_BOARD_PCTV_290E }, 2193 { USB_DEVICE(0x2013, 0x024c), 2194 .driver_info = EM28174_BOARD_PCTV_460E }, 2195 { USB_DEVICE(0x2040, 0x1605), 2196 .driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C }, 2197 { USB_DEVICE(0x1b80, 0xe755), 2198 .driver_info = EM2884_BOARD_C3TECH_DIGITAL_DUO }, 2199 { USB_DEVICE(0xeb1a, 0x5006), 2200 .driver_info = EM2860_BOARD_HT_VIDBOX_NW03 }, 2201 { USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */ 2202 .driver_info = EM2860_BOARD_EASYCAP }, 2203 { USB_DEVICE(0x1b80, 0xe425), 2204 .driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC }, 2205 { USB_DEVICE(0x2304, 0x0242), 2206 .driver_info = EM2884_BOARD_PCTV_510E }, 2207 { USB_DEVICE(0x2013, 0x0251), 2208 .driver_info = EM2884_BOARD_PCTV_520E }, 2209 { USB_DEVICE(0x1b80, 0xe1cc), 2210 .driver_info = EM2874_BOARD_DELOCK_61959 }, 2211 { }, 2212 }; 2213 MODULE_DEVICE_TABLE(usb, em28xx_id_table); 2214 2215 /* 2216 * EEPROM hash table for devices with generic USB IDs 2217 */ 2218 static struct em28xx_hash_table em28xx_eeprom_hash[] = { 2219 /* P/N: SA 60002070465 Tuner: TVF7533-MF */ 2220 {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF}, 2221 {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF}, 2222 {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028}, 2223 {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028}, 2224 {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028}, 2225 {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028}, 2226 {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT}, 2227 {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028}, 2228 }; 2229 2230 /* I2C devicelist hash table for devices with generic USB IDs */ 2231 static struct em28xx_hash_table em28xx_i2c_hash[] = { 2232 {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC}, 2233 {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC}, 2234 {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT}, 2235 {0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT}, 2236 {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC}, 2237 {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF}, 2238 {0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT}, 2239 }; 2240 /* NOTE: introduce a separate hash table for devices with 16 bit eeproms */ 2241 2242 /* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */ 2243 static unsigned short saa711x_addrs[] = { 2244 0x4a >> 1, 0x48 >> 1, /* SAA7111, SAA7111A and SAA7113 */ 2245 0x42 >> 1, 0x40 >> 1, /* SAA7114, SAA7115 and SAA7118 */ 2246 I2C_CLIENT_END }; 2247 2248 static unsigned short tvp5150_addrs[] = { 2249 0xb8 >> 1, 2250 0xba >> 1, 2251 I2C_CLIENT_END 2252 }; 2253 2254 static unsigned short msp3400_addrs[] = { 2255 0x80 >> 1, 2256 0x88 >> 1, 2257 I2C_CLIENT_END 2258 }; 2259 2260 int em28xx_tuner_callback(void *ptr, int component, int command, int arg) 2261 { 2262 struct em28xx_i2c_bus *i2c_bus = ptr; 2263 struct em28xx *dev = i2c_bus->dev; 2264 int rc = 0; 2265 2266 if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000) 2267 return 0; 2268 2269 if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET) 2270 return 0; 2271 2272 rc = em28xx_gpio_set(dev, dev->board.tuner_gpio); 2273 2274 return rc; 2275 } 2276 EXPORT_SYMBOL_GPL(em28xx_tuner_callback); 2277 2278 static inline void em28xx_set_model(struct em28xx *dev) 2279 { 2280 dev->board = em28xx_boards[dev->model]; 2281 2282 /* Those are the default values for the majority of boards 2283 Use those values if not specified otherwise at boards entry 2284 */ 2285 if (!dev->board.xclk) 2286 dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE | 2287 EM28XX_XCLK_FREQUENCY_12MHZ; 2288 2289 if (!dev->board.i2c_speed) 2290 dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2291 EM28XX_I2C_FREQ_100_KHZ; 2292 2293 /* Should be initialized early, for I2C to work */ 2294 dev->def_i2c_bus = dev->board.def_i2c_bus; 2295 } 2296 2297 /* Since em28xx_pre_card_setup() requires a proper dev->model, 2298 * this won't work for boards with generic PCI IDs 2299 */ 2300 static void em28xx_pre_card_setup(struct em28xx *dev) 2301 { 2302 /* Set the initial XCLK and I2C clock values based on the board 2303 definition */ 2304 em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f); 2305 if (!dev->board.is_em2800) 2306 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed); 2307 msleep(50); 2308 2309 /* request some modules */ 2310 switch (dev->model) { 2311 case EM2861_BOARD_PLEXTOR_PX_TV100U: 2312 /* Sets the msp34xx I2S speed */ 2313 dev->i2s_speed = 2048000; 2314 break; 2315 case EM2861_BOARD_KWORLD_PVRTV_300U: 2316 case EM2880_BOARD_KWORLD_DVB_305U: 2317 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x6d); 2318 msleep(10); 2319 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x7d); 2320 msleep(10); 2321 break; 2322 case EM2870_BOARD_COMPRO_VIDEOMATE: 2323 /* TODO: someone can do some cleanup here... 2324 not everything's needed */ 2325 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); 2326 msleep(10); 2327 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01); 2328 msleep(10); 2329 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 2330 mdelay(70); 2331 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc); 2332 mdelay(70); 2333 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xdc); 2334 mdelay(70); 2335 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc); 2336 mdelay(70); 2337 break; 2338 case EM2870_BOARD_TERRATEC_XS_MT2060: 2339 /* this device needs some gpio writes to get the DVB-T 2340 demod work */ 2341 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2342 mdelay(70); 2343 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde); 2344 mdelay(70); 2345 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2346 mdelay(70); 2347 break; 2348 case EM2870_BOARD_PINNACLE_PCTV_DVB: 2349 /* this device needs some gpio writes to get the 2350 DVB-T demod work */ 2351 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2352 mdelay(70); 2353 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde); 2354 mdelay(70); 2355 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2356 mdelay(70); 2357 break; 2358 case EM2820_BOARD_GADMEI_UTV310: 2359 case EM2820_BOARD_MSI_VOX_USB_2: 2360 /* enables audio for that devices */ 2361 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 2362 break; 2363 2364 case EM2882_BOARD_KWORLD_ATSC_315U: 2365 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); 2366 msleep(10); 2367 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2368 msleep(10); 2369 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); 2370 msleep(10); 2371 em28xx_write_reg(dev, EM2880_R04_GPO, 0x08); 2372 msleep(10); 2373 break; 2374 2375 case EM2860_BOARD_KAIOMY_TVNPC_U2: 2376 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1); 2377 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1); 2378 em28xx_write_regs(dev, 0x0d, "\x42", 1); 2379 em28xx_write_regs(dev, 0x08, "\xfd", 1); 2380 msleep(10); 2381 em28xx_write_regs(dev, 0x08, "\xff", 1); 2382 msleep(10); 2383 em28xx_write_regs(dev, 0x08, "\x7f", 1); 2384 msleep(10); 2385 em28xx_write_regs(dev, 0x08, "\x6b", 1); 2386 2387 break; 2388 case EM2860_BOARD_EASYCAP: 2389 em28xx_write_regs(dev, 0x08, "\xf8", 1); 2390 break; 2391 2392 case EM2820_BOARD_IODATA_GVMVP_SZ: 2393 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); 2394 msleep(70); 2395 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7); 2396 msleep(10); 2397 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2398 msleep(70); 2399 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 2400 msleep(70); 2401 break; 2402 } 2403 2404 em28xx_gpio_set(dev, dev->board.tuner_gpio); 2405 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 2406 2407 /* Unlock device */ 2408 em28xx_set_mode(dev, EM28XX_SUSPEND); 2409 } 2410 2411 static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) 2412 { 2413 memset(ctl, 0, sizeof(*ctl)); 2414 2415 ctl->fname = XC2028_DEFAULT_FIRMWARE; 2416 ctl->max_len = 64; 2417 ctl->mts = em28xx_boards[dev->model].mts_firmware; 2418 2419 switch (dev->model) { 2420 case EM2880_BOARD_EMPIRE_DUAL_TV: 2421 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: 2422 case EM2882_BOARD_TERRATEC_HYBRID_XS: 2423 ctl->demod = XC3028_FE_ZARLINK456; 2424 break; 2425 case EM2880_BOARD_TERRATEC_HYBRID_XS: 2426 case EM2880_BOARD_TERRATEC_HYBRID_XS_FR: 2427 case EM2881_BOARD_PINNACLE_HYBRID_PRO: 2428 ctl->demod = XC3028_FE_ZARLINK456; 2429 break; 2430 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: 2431 case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E: 2432 ctl->demod = XC3028_FE_DEFAULT; 2433 break; 2434 case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600: 2435 ctl->demod = XC3028_FE_DEFAULT; 2436 ctl->fname = XC3028L_DEFAULT_FIRMWARE; 2437 break; 2438 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: 2439 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: 2440 case EM2880_BOARD_PINNACLE_PCTV_HD_PRO: 2441 /* FIXME: Better to specify the needed IF */ 2442 ctl->demod = XC3028_FE_DEFAULT; 2443 break; 2444 case EM2883_BOARD_KWORLD_HYBRID_330U: 2445 case EM2882_BOARD_DIKOM_DK300: 2446 case EM2882_BOARD_KWORLD_VS_DVBT: 2447 ctl->demod = XC3028_FE_CHINA; 2448 ctl->fname = XC2028_DEFAULT_FIRMWARE; 2449 break; 2450 case EM2882_BOARD_EVGA_INDTUBE: 2451 ctl->demod = XC3028_FE_CHINA; 2452 ctl->fname = XC3028L_DEFAULT_FIRMWARE; 2453 break; 2454 default: 2455 ctl->demod = XC3028_FE_OREN538; 2456 } 2457 } 2458 2459 static void em28xx_tuner_setup(struct em28xx *dev) 2460 { 2461 struct tuner_setup tun_setup; 2462 struct v4l2_frequency f; 2463 2464 if (dev->tuner_type == TUNER_ABSENT) 2465 return; 2466 2467 memset(&tun_setup, 0, sizeof(tun_setup)); 2468 2469 tun_setup.mode_mask = T_ANALOG_TV | T_RADIO; 2470 tun_setup.tuner_callback = em28xx_tuner_callback; 2471 2472 if (dev->board.radio.type) { 2473 tun_setup.type = dev->board.radio.type; 2474 tun_setup.addr = dev->board.radio_addr; 2475 2476 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup); 2477 } 2478 2479 if ((dev->tuner_type != TUNER_ABSENT) && (dev->tuner_type)) { 2480 tun_setup.type = dev->tuner_type; 2481 tun_setup.addr = dev->tuner_addr; 2482 2483 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup); 2484 } 2485 2486 if (dev->tda9887_conf) { 2487 struct v4l2_priv_tun_config tda9887_cfg; 2488 2489 tda9887_cfg.tuner = TUNER_TDA9887; 2490 tda9887_cfg.priv = &dev->tda9887_conf; 2491 2492 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &tda9887_cfg); 2493 } 2494 2495 if (dev->tuner_type == TUNER_XC2028) { 2496 struct v4l2_priv_tun_config xc2028_cfg; 2497 struct xc2028_ctrl ctl; 2498 2499 memset(&xc2028_cfg, 0, sizeof(xc2028_cfg)); 2500 memset(&ctl, 0, sizeof(ctl)); 2501 2502 em28xx_setup_xc3028(dev, &ctl); 2503 2504 xc2028_cfg.tuner = TUNER_XC2028; 2505 xc2028_cfg.priv = &ctl; 2506 2507 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &xc2028_cfg); 2508 } 2509 2510 /* configure tuner */ 2511 f.tuner = 0; 2512 f.type = V4L2_TUNER_ANALOG_TV; 2513 f.frequency = 9076; /* just a magic number */ 2514 dev->ctl_freq = f.frequency; 2515 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f); 2516 } 2517 2518 static int em28xx_hint_board(struct em28xx *dev) 2519 { 2520 int i; 2521 2522 if (dev->board.is_webcam) { 2523 if (dev->em28xx_sensor == EM28XX_MT9V011) { 2524 dev->model = EM2820_BOARD_SILVERCREST_WEBCAM; 2525 } else if (dev->em28xx_sensor == EM28XX_MT9M001 || 2526 dev->em28xx_sensor == EM28XX_MT9M111) { 2527 dev->model = EM2750_BOARD_UNKNOWN; 2528 } 2529 /* FIXME: IMPROVE ! */ 2530 2531 return 0; 2532 } 2533 2534 /* HINT method: EEPROM 2535 * 2536 * This method works only for boards with eeprom. 2537 * Uses a hash of all eeprom bytes. The hash should be 2538 * unique for a vendor/tuner pair. 2539 * There are a high chance that tuners for different 2540 * video standards produce different hashes. 2541 */ 2542 for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) { 2543 if (dev->hash == em28xx_eeprom_hash[i].hash) { 2544 dev->model = em28xx_eeprom_hash[i].model; 2545 dev->tuner_type = em28xx_eeprom_hash[i].tuner; 2546 2547 em28xx_errdev("Your board has no unique USB ID.\n"); 2548 em28xx_errdev("A hint were successfully done, " 2549 "based on eeprom hash.\n"); 2550 em28xx_errdev("This method is not 100%% failproof.\n"); 2551 em28xx_errdev("If the board were missdetected, " 2552 "please email this log to:\n"); 2553 em28xx_errdev("\tV4L Mailing List " 2554 " <linux-media@vger.kernel.org>\n"); 2555 em28xx_errdev("Board detected as %s\n", 2556 em28xx_boards[dev->model].name); 2557 2558 return 0; 2559 } 2560 } 2561 2562 /* HINT method: I2C attached devices 2563 * 2564 * This method works for all boards. 2565 * Uses a hash of i2c scanned devices. 2566 * Devices with the same i2c attached chips will 2567 * be considered equal. 2568 * This method is less precise than the eeprom one. 2569 */ 2570 2571 /* user did not request i2c scanning => do it now */ 2572 if (!dev->i2c_hash) 2573 em28xx_do_i2c_scan(dev, dev->def_i2c_bus); 2574 2575 for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) { 2576 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) { 2577 dev->model = em28xx_i2c_hash[i].model; 2578 dev->tuner_type = em28xx_i2c_hash[i].tuner; 2579 em28xx_errdev("Your board has no unique USB ID.\n"); 2580 em28xx_errdev("A hint were successfully done, " 2581 "based on i2c devicelist hash.\n"); 2582 em28xx_errdev("This method is not 100%% failproof.\n"); 2583 em28xx_errdev("If the board were missdetected, " 2584 "please email this log to:\n"); 2585 em28xx_errdev("\tV4L Mailing List " 2586 " <linux-media@vger.kernel.org>\n"); 2587 em28xx_errdev("Board detected as %s\n", 2588 em28xx_boards[dev->model].name); 2589 2590 return 0; 2591 } 2592 } 2593 2594 em28xx_errdev("Your board has no unique USB ID and thus need a " 2595 "hint to be detected.\n"); 2596 em28xx_errdev("You may try to use card=<n> insmod option to " 2597 "workaround that.\n"); 2598 em28xx_errdev("Please send an email with this log to:\n"); 2599 em28xx_errdev("\tV4L Mailing List <linux-media@vger.kernel.org>\n"); 2600 em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash); 2601 em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash); 2602 2603 em28xx_errdev("Here is a list of valid choices for the card=<n>" 2604 " insmod option:\n"); 2605 for (i = 0; i < em28xx_bcount; i++) { 2606 em28xx_errdev(" card=%d -> %s\n", 2607 i, em28xx_boards[i].name); 2608 } 2609 return -1; 2610 } 2611 2612 static void em28xx_card_setup(struct em28xx *dev) 2613 { 2614 /* 2615 * If the device can be a webcam, seek for a sensor. 2616 * If sensor is not found, then it isn't a webcam. 2617 */ 2618 if (dev->board.is_webcam) { 2619 if (em28xx_detect_sensor(dev) < 0) 2620 dev->board.is_webcam = 0; 2621 else 2622 dev->progressive = 1; 2623 } 2624 2625 switch (dev->model) { 2626 case EM2750_BOARD_UNKNOWN: 2627 case EM2820_BOARD_UNKNOWN: 2628 case EM2800_BOARD_UNKNOWN: 2629 /* 2630 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD. 2631 * 2632 * This occurs because they share identical USB vendor and 2633 * product IDs. 2634 * 2635 * What we do here is look up the EEPROM hash of the K-WORLD 2636 * and if it is found then we decide that we do not have 2637 * a DIGIVOX and reset the device to the K-WORLD instead. 2638 * 2639 * This solution is only valid if they do not share eeprom 2640 * hash identities which has not been determined as yet. 2641 */ 2642 if (em28xx_hint_board(dev) < 0) 2643 em28xx_errdev("Board not discovered\n"); 2644 else { 2645 em28xx_set_model(dev); 2646 em28xx_pre_card_setup(dev); 2647 } 2648 break; 2649 default: 2650 em28xx_set_model(dev); 2651 } 2652 2653 em28xx_info("Identified as %s (card=%d)\n", 2654 dev->board.name, dev->model); 2655 2656 dev->tuner_type = em28xx_boards[dev->model].tuner_type; 2657 if (em28xx_boards[dev->model].tuner_addr) 2658 dev->tuner_addr = em28xx_boards[dev->model].tuner_addr; 2659 2660 if (em28xx_boards[dev->model].tda9887_conf) 2661 dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf; 2662 2663 /* request some modules */ 2664 switch (dev->model) { 2665 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2: 2666 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: 2667 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: 2668 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: 2669 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: 2670 case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C: 2671 { 2672 struct tveeprom tv; 2673 2674 if (dev->eedata == NULL) 2675 break; 2676 #if defined(CONFIG_MODULES) && defined(MODULE) 2677 request_module("tveeprom"); 2678 #endif 2679 /* Call first TVeeprom */ 2680 2681 dev->i2c_client[dev->def_i2c_bus].addr = 0xa0 >> 1; 2682 tveeprom_hauppauge_analog(&dev->i2c_client[dev->def_i2c_bus], &tv, dev->eedata); 2683 2684 dev->tuner_type = tv.tuner_type; 2685 2686 if (tv.audio_processor == TVEEPROM_AUDPROC_MSP) { 2687 dev->i2s_speed = 2048000; 2688 dev->board.has_msp34xx = 1; 2689 } 2690 break; 2691 } 2692 case EM2882_BOARD_KWORLD_ATSC_315U: 2693 em28xx_write_reg(dev, 0x0d, 0x42); 2694 msleep(10); 2695 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 2696 msleep(10); 2697 break; 2698 case EM2820_BOARD_KWORLD_PVRTV2800RF: 2699 /* GPIO enables sound on KWORLD PVR TV 2800RF */ 2700 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf9); 2701 break; 2702 case EM2820_BOARD_UNKNOWN: 2703 case EM2800_BOARD_UNKNOWN: 2704 /* 2705 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD. 2706 * 2707 * This occurs because they share identical USB vendor and 2708 * product IDs. 2709 * 2710 * What we do here is look up the EEPROM hash of the K-WORLD 2711 * and if it is found then we decide that we do not have 2712 * a DIGIVOX and reset the device to the K-WORLD instead. 2713 * 2714 * This solution is only valid if they do not share eeprom 2715 * hash identities which has not been determined as yet. 2716 */ 2717 case EM2880_BOARD_MSI_DIGIVOX_AD: 2718 if (!em28xx_hint_board(dev)) 2719 em28xx_set_model(dev); 2720 2721 /* In cases where we had to use a board hint, the call to 2722 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, 2723 so make the call now so the analog GPIOs are set properly 2724 before probing the i2c bus. */ 2725 em28xx_gpio_set(dev, dev->board.tuner_gpio); 2726 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 2727 break; 2728 2729 /* 2730 * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR. 2731 * 2732 * This occurs because they share identical USB vendor and 2733 * product IDs. 2734 * 2735 * What we do here is look up the EEPROM hash of the Dikom 2736 * and if it is found then we decide that we do not have 2737 * a Kworld and reset the device to the Dikom instead. 2738 * 2739 * This solution is only valid if they do not share eeprom 2740 * hash identities which has not been determined as yet. 2741 */ 2742 case EM2882_BOARD_KWORLD_VS_DVBT: 2743 if (!em28xx_hint_board(dev)) 2744 em28xx_set_model(dev); 2745 2746 /* In cases where we had to use a board hint, the call to 2747 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, 2748 so make the call now so the analog GPIOs are set properly 2749 before probing the i2c bus. */ 2750 em28xx_gpio_set(dev, dev->board.tuner_gpio); 2751 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 2752 break; 2753 } 2754 2755 if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) { 2756 em28xx_errdev("\n\n"); 2757 em28xx_errdev("The support for this board weren't " 2758 "valid yet.\n"); 2759 em28xx_errdev("Please send a report of having this working\n"); 2760 em28xx_errdev("not to V4L mailing list (and/or to other " 2761 "addresses)\n\n"); 2762 } 2763 2764 /* Free eeprom data memory */ 2765 kfree(dev->eedata); 2766 dev->eedata = NULL; 2767 2768 /* Allow override tuner type by a module parameter */ 2769 if (tuner >= 0) 2770 dev->tuner_type = tuner; 2771 2772 /* request some modules */ 2773 if (dev->board.has_msp34xx) 2774 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus], 2775 "msp3400", 0, msp3400_addrs); 2776 2777 if (dev->board.decoder == EM28XX_SAA711X) 2778 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus], 2779 "saa7115_auto", 0, saa711x_addrs); 2780 2781 if (dev->board.decoder == EM28XX_TVP5150) 2782 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus], 2783 "tvp5150", 0, tvp5150_addrs); 2784 2785 if (dev->board.adecoder == EM28XX_TVAUDIO) 2786 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus], 2787 "tvaudio", dev->board.tvaudio_addr, NULL); 2788 2789 if (dev->board.tuner_type != TUNER_ABSENT) { 2790 int has_demod = (dev->tda9887_conf & TDA9887_PRESENT); 2791 2792 if (dev->board.radio.type) 2793 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus], 2794 "tuner", dev->board.radio_addr, NULL); 2795 2796 if (has_demod) 2797 v4l2_i2c_new_subdev(&dev->v4l2_dev, 2798 &dev->i2c_adap[dev->def_i2c_bus], "tuner", 2799 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); 2800 if (dev->tuner_addr == 0) { 2801 enum v4l2_i2c_tuner_type type = 2802 has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV; 2803 struct v4l2_subdev *sd; 2804 2805 sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, 2806 &dev->i2c_adap[dev->def_i2c_bus], "tuner", 2807 0, v4l2_i2c_tuner_addrs(type)); 2808 2809 if (sd) 2810 dev->tuner_addr = v4l2_i2c_subdev_addr(sd); 2811 } else { 2812 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus], 2813 "tuner", dev->tuner_addr, NULL); 2814 } 2815 } 2816 2817 em28xx_tuner_setup(dev); 2818 2819 em28xx_init_camera(dev); 2820 } 2821 2822 2823 static void request_module_async(struct work_struct *work) 2824 { 2825 struct em28xx *dev = container_of(work, 2826 struct em28xx, request_module_wk); 2827 2828 /* 2829 * The em28xx extensions can be modules or builtin. If the 2830 * modules are already loaded or are built in, those extensions 2831 * can be initialised right now. Otherwise, the module init 2832 * code will do it. 2833 */ 2834 em28xx_init_extension(dev); 2835 2836 #if defined(CONFIG_MODULES) && defined(MODULE) 2837 if (dev->has_audio_class) 2838 request_module("snd-usb-audio"); 2839 else if (dev->has_alsa_audio) 2840 request_module("em28xx-alsa"); 2841 2842 if (dev->board.has_dvb) 2843 request_module("em28xx-dvb"); 2844 if (dev->board.has_snapshot_button || 2845 ((dev->board.ir_codes || dev->board.has_ir_i2c) && !disable_ir)) 2846 request_module("em28xx-rc"); 2847 #endif /* CONFIG_MODULES */ 2848 } 2849 2850 static void request_modules(struct em28xx *dev) 2851 { 2852 INIT_WORK(&dev->request_module_wk, request_module_async); 2853 schedule_work(&dev->request_module_wk); 2854 } 2855 2856 static void flush_request_modules(struct em28xx *dev) 2857 { 2858 flush_work(&dev->request_module_wk); 2859 } 2860 2861 /* 2862 * em28xx_release_resources() 2863 * unregisters the v4l2,i2c and usb devices 2864 * called when the device gets disconnected or at module unload 2865 */ 2866 void em28xx_release_resources(struct em28xx *dev) 2867 { 2868 /*FIXME: I2C IR should be disconnected */ 2869 2870 em28xx_release_analog_resources(dev); 2871 2872 if (dev->def_i2c_bus) 2873 em28xx_i2c_unregister(dev, 1); 2874 em28xx_i2c_unregister(dev, 0); 2875 if (dev->clk) 2876 v4l2_clk_unregister_fixed(dev->clk); 2877 2878 v4l2_ctrl_handler_free(&dev->ctrl_handler); 2879 2880 v4l2_device_unregister(&dev->v4l2_dev); 2881 2882 usb_put_dev(dev->udev); 2883 2884 /* Mark device as unused */ 2885 clear_bit(dev->devno, &em28xx_devused); 2886 }; 2887 2888 /* 2889 * em28xx_init_dev() 2890 * allocates and inits the device structs, registers i2c bus and v4l device 2891 */ 2892 static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, 2893 struct usb_interface *interface, 2894 int minor) 2895 { 2896 struct v4l2_ctrl_handler *hdl = &dev->ctrl_handler; 2897 int retval; 2898 static const char *default_chip_name = "em28xx"; 2899 const char *chip_name = default_chip_name; 2900 2901 dev->udev = udev; 2902 mutex_init(&dev->vb_queue_lock); 2903 mutex_init(&dev->vb_vbi_queue_lock); 2904 mutex_init(&dev->ctrl_urb_lock); 2905 spin_lock_init(&dev->slock); 2906 2907 dev->em28xx_write_regs = em28xx_write_regs; 2908 dev->em28xx_read_reg = em28xx_read_reg; 2909 dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len; 2910 dev->em28xx_write_regs_req = em28xx_write_regs_req; 2911 dev->em28xx_read_reg_req = em28xx_read_reg_req; 2912 dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800; 2913 2914 em28xx_set_model(dev); 2915 2916 dev->wait_after_write = 5; 2917 2918 /* Based on the Chip ID, set the device configuration */ 2919 retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID); 2920 if (retval > 0) { 2921 dev->chip_id = retval; 2922 2923 switch (dev->chip_id) { 2924 case CHIP_ID_EM2800: 2925 chip_name = "em2800"; 2926 break; 2927 case CHIP_ID_EM2710: 2928 chip_name = "em2710"; 2929 break; 2930 case CHIP_ID_EM2750: 2931 chip_name = "em2750"; 2932 break; 2933 case CHIP_ID_EM2765: 2934 chip_name = "em2765"; 2935 dev->wait_after_write = 0; 2936 dev->is_em25xx = 1; 2937 dev->eeprom_addrwidth_16bit = 1; 2938 break; 2939 case CHIP_ID_EM2820: 2940 chip_name = "em2710/2820"; 2941 if (le16_to_cpu(dev->udev->descriptor.idVendor) 2942 == 0xeb1a) { 2943 __le16 idProd = dev->udev->descriptor.idProduct; 2944 if (le16_to_cpu(idProd) == 0x2710) 2945 chip_name = "em2710"; 2946 else if (le16_to_cpu(idProd) == 0x2820) 2947 chip_name = "em2820"; 2948 } 2949 /* NOTE: the em2820 is used in webcams, too ! */ 2950 break; 2951 case CHIP_ID_EM2840: 2952 chip_name = "em2840"; 2953 break; 2954 case CHIP_ID_EM2860: 2955 chip_name = "em2860"; 2956 break; 2957 case CHIP_ID_EM2870: 2958 chip_name = "em2870"; 2959 dev->wait_after_write = 0; 2960 break; 2961 case CHIP_ID_EM2874: 2962 chip_name = "em2874"; 2963 dev->wait_after_write = 0; 2964 dev->eeprom_addrwidth_16bit = 1; 2965 break; 2966 case CHIP_ID_EM28174: 2967 chip_name = "em28174"; 2968 dev->wait_after_write = 0; 2969 dev->eeprom_addrwidth_16bit = 1; 2970 break; 2971 case CHIP_ID_EM2883: 2972 chip_name = "em2882/3"; 2973 dev->wait_after_write = 0; 2974 break; 2975 case CHIP_ID_EM2884: 2976 chip_name = "em2884"; 2977 dev->wait_after_write = 0; 2978 dev->eeprom_addrwidth_16bit = 1; 2979 break; 2980 default: 2981 printk(KERN_INFO DRIVER_NAME 2982 ": unknown em28xx chip ID (%d)\n", dev->chip_id); 2983 } 2984 } 2985 2986 if (chip_name != default_chip_name) 2987 printk(KERN_INFO DRIVER_NAME 2988 ": chip ID is %s\n", chip_name); 2989 2990 /* 2991 * For em2820/em2710, the name may change latter, after checking 2992 * if the device has a sensor (so, it is em2710) or not. 2993 */ 2994 snprintf(dev->name, sizeof(dev->name), "%s #%d", chip_name, dev->devno); 2995 2996 if (dev->is_audio_only) { 2997 retval = em28xx_audio_setup(dev); 2998 if (retval) 2999 return -ENODEV; 3000 em28xx_init_extension(dev); 3001 3002 return 0; 3003 } 3004 3005 em28xx_pre_card_setup(dev); 3006 3007 if (!dev->board.is_em2800) { 3008 /* Resets I2C speed */ 3009 retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed); 3010 if (retval < 0) { 3011 em28xx_errdev("%s: em28xx_write_reg failed!" 3012 " retval [%d]\n", 3013 __func__, retval); 3014 return retval; 3015 } 3016 } 3017 3018 retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev); 3019 if (retval < 0) { 3020 em28xx_errdev("Call to v4l2_device_register() failed!\n"); 3021 return retval; 3022 } 3023 3024 v4l2_ctrl_handler_init(hdl, 8); 3025 dev->v4l2_dev.ctrl_handler = hdl; 3026 3027 rt_mutex_init(&dev->i2c_bus_lock); 3028 3029 /* register i2c bus 0 */ 3030 if (dev->board.is_em2800) 3031 retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM2800); 3032 else 3033 retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM28XX); 3034 if (retval < 0) { 3035 em28xx_errdev("%s: em28xx_i2c_register bus 0 - error [%d]!\n", 3036 __func__, retval); 3037 goto unregister_dev; 3038 } 3039 3040 /* register i2c bus 1 */ 3041 if (dev->def_i2c_bus) { 3042 if (dev->is_em25xx) 3043 retval = em28xx_i2c_register(dev, 1, 3044 EM28XX_I2C_ALGO_EM25XX_BUS_B); 3045 else 3046 retval = em28xx_i2c_register(dev, 1, 3047 EM28XX_I2C_ALGO_EM28XX); 3048 if (retval < 0) { 3049 em28xx_errdev("%s: em28xx_i2c_register bus 1 - error [%d]!\n", 3050 __func__, retval); 3051 goto unregister_dev; 3052 } 3053 } 3054 3055 /* 3056 * Default format, used for tvp5150 or saa711x output formats 3057 */ 3058 dev->vinmode = 0x10; 3059 dev->vinctl = EM28XX_VINCTRL_INTERLACED | 3060 EM28XX_VINCTRL_CCIR656_ENABLE; 3061 3062 /* Do board specific init and eeprom reading */ 3063 em28xx_card_setup(dev); 3064 3065 /* Configure audio */ 3066 retval = em28xx_audio_setup(dev); 3067 if (retval < 0) { 3068 em28xx_errdev("%s: Error while setting audio - error [%d]!\n", 3069 __func__, retval); 3070 goto fail; 3071 } 3072 if (dev->audio_mode.ac97 != EM28XX_NO_AC97) { 3073 v4l2_ctrl_new_std(hdl, &em28xx_ctrl_ops, 3074 V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1); 3075 v4l2_ctrl_new_std(hdl, &em28xx_ctrl_ops, 3076 V4L2_CID_AUDIO_VOLUME, 0, 0x1f, 1, 0x1f); 3077 } else { 3078 /* install the em28xx notify callback */ 3079 v4l2_ctrl_notify(v4l2_ctrl_find(hdl, V4L2_CID_AUDIO_MUTE), 3080 em28xx_ctrl_notify, dev); 3081 v4l2_ctrl_notify(v4l2_ctrl_find(hdl, V4L2_CID_AUDIO_VOLUME), 3082 em28xx_ctrl_notify, dev); 3083 } 3084 3085 /* wake i2c devices */ 3086 em28xx_wake_i2c(dev); 3087 3088 /* init video dma queues */ 3089 INIT_LIST_HEAD(&dev->vidq.active); 3090 INIT_LIST_HEAD(&dev->vbiq.active); 3091 3092 if (dev->board.has_msp34xx) { 3093 /* Send a reset to other chips via gpio */ 3094 retval = em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7); 3095 if (retval < 0) { 3096 em28xx_errdev("%s: em28xx_write_reg - " 3097 "msp34xx(1) failed! error [%d]\n", 3098 __func__, retval); 3099 goto fail; 3100 } 3101 msleep(3); 3102 3103 retval = em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); 3104 if (retval < 0) { 3105 em28xx_errdev("%s: em28xx_write_reg - " 3106 "msp34xx(2) failed! error [%d]\n", 3107 __func__, retval); 3108 goto fail; 3109 } 3110 msleep(3); 3111 } 3112 3113 retval = em28xx_register_analog_devices(dev); 3114 if (retval < 0) { 3115 goto fail; 3116 } 3117 3118 /* Save some power by putting tuner to sleep */ 3119 v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0); 3120 3121 return 0; 3122 3123 fail: 3124 if (dev->def_i2c_bus) 3125 em28xx_i2c_unregister(dev, 1); 3126 em28xx_i2c_unregister(dev, 0); 3127 v4l2_ctrl_handler_free(&dev->ctrl_handler); 3128 3129 unregister_dev: 3130 v4l2_device_unregister(&dev->v4l2_dev); 3131 3132 return retval; 3133 } 3134 3135 /* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */ 3136 #define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) 3137 3138 /* 3139 * em28xx_usb_probe() 3140 * checks for supported devices 3141 */ 3142 static int em28xx_usb_probe(struct usb_interface *interface, 3143 const struct usb_device_id *id) 3144 { 3145 struct usb_device *udev; 3146 struct em28xx *dev = NULL; 3147 int retval; 3148 bool has_audio = false, has_video = false, has_dvb = false; 3149 int i, nr, try_bulk; 3150 const int ifnum = interface->altsetting[0].desc.bInterfaceNumber; 3151 char *speed; 3152 3153 udev = usb_get_dev(interface_to_usbdev(interface)); 3154 3155 /* Check to see next free device and mark as used */ 3156 do { 3157 nr = find_first_zero_bit(&em28xx_devused, EM28XX_MAXBOARDS); 3158 if (nr >= EM28XX_MAXBOARDS) { 3159 /* No free device slots */ 3160 printk(DRIVER_NAME ": Supports only %i em28xx boards.\n", 3161 EM28XX_MAXBOARDS); 3162 retval = -ENOMEM; 3163 goto err_no_slot; 3164 } 3165 } while (test_and_set_bit(nr, &em28xx_devused)); 3166 3167 /* Don't register audio interfaces */ 3168 if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { 3169 em28xx_err(DRIVER_NAME " audio device (%04x:%04x): " 3170 "interface %i, class %i\n", 3171 le16_to_cpu(udev->descriptor.idVendor), 3172 le16_to_cpu(udev->descriptor.idProduct), 3173 ifnum, 3174 interface->altsetting[0].desc.bInterfaceClass); 3175 3176 retval = -ENODEV; 3177 goto err; 3178 } 3179 3180 /* allocate memory for our device state and initialize it */ 3181 dev = kzalloc(sizeof(*dev), GFP_KERNEL); 3182 if (dev == NULL) { 3183 em28xx_err(DRIVER_NAME ": out of memory!\n"); 3184 retval = -ENOMEM; 3185 goto err; 3186 } 3187 3188 /* compute alternate max packet sizes */ 3189 dev->alt_max_pkt_size_isoc = 3190 kmalloc(sizeof(dev->alt_max_pkt_size_isoc[0]) * 3191 interface->num_altsetting, GFP_KERNEL); 3192 if (dev->alt_max_pkt_size_isoc == NULL) { 3193 em28xx_errdev("out of memory!\n"); 3194 kfree(dev); 3195 retval = -ENOMEM; 3196 goto err; 3197 } 3198 3199 /* Get endpoints */ 3200 for (i = 0; i < interface->num_altsetting; i++) { 3201 int ep; 3202 3203 for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) { 3204 const struct usb_endpoint_descriptor *e; 3205 int sizedescr, size; 3206 3207 e = &interface->altsetting[i].endpoint[ep].desc; 3208 3209 sizedescr = le16_to_cpu(e->wMaxPacketSize); 3210 size = sizedescr & 0x7ff; 3211 3212 if (udev->speed == USB_SPEED_HIGH) 3213 size = size * hb_mult(sizedescr); 3214 3215 if (usb_endpoint_dir_in(e)) { 3216 switch (e->bEndpointAddress) { 3217 case 0x82: 3218 has_video = true; 3219 if (usb_endpoint_xfer_isoc(e)) { 3220 dev->analog_ep_isoc = 3221 e->bEndpointAddress; 3222 dev->alt_max_pkt_size_isoc[i] = size; 3223 } else if (usb_endpoint_xfer_bulk(e)) { 3224 dev->analog_ep_bulk = 3225 e->bEndpointAddress; 3226 } 3227 break; 3228 case 0x83: 3229 if (usb_endpoint_xfer_isoc(e)) { 3230 has_audio = true; 3231 } else { 3232 printk(KERN_INFO DRIVER_NAME 3233 ": error: skipping audio endpoint 0x83, because it uses bulk transfers !\n"); 3234 } 3235 break; 3236 case 0x84: 3237 if (has_video && 3238 (usb_endpoint_xfer_bulk(e))) { 3239 dev->analog_ep_bulk = 3240 e->bEndpointAddress; 3241 } else { 3242 if (usb_endpoint_xfer_isoc(e)) { 3243 if (size > dev->dvb_max_pkt_size_isoc) { 3244 has_dvb = true; /* see NOTE (~) */ 3245 dev->dvb_ep_isoc = e->bEndpointAddress; 3246 dev->dvb_max_pkt_size_isoc = size; 3247 dev->dvb_alt_isoc = i; 3248 } 3249 } else { 3250 has_dvb = true; 3251 dev->dvb_ep_bulk = e->bEndpointAddress; 3252 } 3253 } 3254 break; 3255 } 3256 } 3257 /* NOTE: 3258 * Old logic with support for isoc transfers only was: 3259 * 0x82 isoc => analog 3260 * 0x83 isoc => audio 3261 * 0x84 isoc => digital 3262 * 3263 * New logic with support for bulk transfers 3264 * 0x82 isoc => analog 3265 * 0x82 bulk => analog 3266 * 0x83 isoc* => audio 3267 * 0x84 isoc => digital 3268 * 0x84 bulk => analog or digital** 3269 * (*: audio should always be isoc) 3270 * (**: analog, if ep 0x82 is isoc, otherwise digital) 3271 * 3272 * The new logic preserves backwards compatibility and 3273 * reflects the endpoint configurations we have seen 3274 * so far. But there might be devices for which this 3275 * logic is not sufficient... 3276 */ 3277 /* 3278 * NOTE (~): some manufacturers (e.g. Terratec) disable 3279 * endpoints by setting wMaxPacketSize to 0 bytes for 3280 * all alt settings. So far, we've seen this for 3281 * DVB isoc endpoints only. 3282 */ 3283 } 3284 } 3285 3286 if (!(has_audio || has_video || has_dvb)) { 3287 retval = -ENODEV; 3288 goto err_free; 3289 } 3290 3291 switch (udev->speed) { 3292 case USB_SPEED_LOW: 3293 speed = "1.5"; 3294 break; 3295 case USB_SPEED_UNKNOWN: 3296 case USB_SPEED_FULL: 3297 speed = "12"; 3298 break; 3299 case USB_SPEED_HIGH: 3300 speed = "480"; 3301 break; 3302 default: 3303 speed = "unknown"; 3304 } 3305 3306 printk(KERN_INFO DRIVER_NAME 3307 ": New device %s %s @ %s Mbps " 3308 "(%04x:%04x, interface %d, class %d)\n", 3309 udev->manufacturer ? udev->manufacturer : "", 3310 udev->product ? udev->product : "", 3311 speed, 3312 le16_to_cpu(udev->descriptor.idVendor), 3313 le16_to_cpu(udev->descriptor.idProduct), 3314 ifnum, 3315 interface->altsetting->desc.bInterfaceNumber); 3316 3317 /* 3318 * Make sure we have 480 Mbps of bandwidth, otherwise things like 3319 * video stream wouldn't likely work, since 12 Mbps is generally 3320 * not enough even for most Digital TV streams. 3321 */ 3322 if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) { 3323 printk(DRIVER_NAME ": Device initialization failed.\n"); 3324 printk(DRIVER_NAME ": Device must be connected to a high-speed" 3325 " USB 2.0 port.\n"); 3326 retval = -ENODEV; 3327 goto err_free; 3328 } 3329 3330 dev->devno = nr; 3331 dev->model = id->driver_info; 3332 dev->alt = -1; 3333 dev->is_audio_only = has_audio && !(has_video || has_dvb); 3334 dev->has_alsa_audio = has_audio; 3335 dev->audio_ifnum = ifnum; 3336 3337 /* Checks if audio is provided by some interface */ 3338 for (i = 0; i < udev->config->desc.bNumInterfaces; i++) { 3339 struct usb_interface *uif = udev->config->interface[i]; 3340 if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { 3341 dev->has_audio_class = 1; 3342 break; 3343 } 3344 } 3345 3346 if (has_audio) 3347 printk(KERN_INFO DRIVER_NAME 3348 ": Audio interface %i found %s\n", 3349 ifnum, 3350 dev->has_audio_class ? "(USB Audio Class)" : "(Vendor Class)"); 3351 if (has_video) 3352 printk(KERN_INFO DRIVER_NAME 3353 ": Video interface %i found:%s%s\n", 3354 ifnum, 3355 dev->analog_ep_bulk ? " bulk" : "", 3356 dev->analog_ep_isoc ? " isoc" : ""); 3357 if (has_dvb) 3358 printk(KERN_INFO DRIVER_NAME 3359 ": DVB interface %i found:%s%s\n", 3360 ifnum, 3361 dev->dvb_ep_bulk ? " bulk" : "", 3362 dev->dvb_ep_isoc ? " isoc" : ""); 3363 3364 dev->num_alt = interface->num_altsetting; 3365 3366 if ((unsigned)card[nr] < em28xx_bcount) 3367 dev->model = card[nr]; 3368 3369 /* save our data pointer in this interface device */ 3370 usb_set_intfdata(interface, dev); 3371 3372 /* initialize videobuf2 stuff */ 3373 em28xx_vb2_setup(dev); 3374 3375 /* allocate device struct */ 3376 mutex_init(&dev->lock); 3377 mutex_lock(&dev->lock); 3378 retval = em28xx_init_dev(dev, udev, interface, nr); 3379 if (retval) { 3380 goto unlock_and_free; 3381 } 3382 3383 if (usb_xfer_mode < 0) { 3384 if (dev->board.is_webcam) 3385 try_bulk = 1; 3386 else 3387 try_bulk = 0; 3388 } else { 3389 try_bulk = usb_xfer_mode > 0; 3390 } 3391 3392 /* Select USB transfer types to use */ 3393 if (has_video) { 3394 if (!dev->analog_ep_isoc || (try_bulk && dev->analog_ep_bulk)) 3395 dev->analog_xfer_bulk = 1; 3396 em28xx_info("analog set to %s mode.\n", 3397 dev->analog_xfer_bulk ? "bulk" : "isoc"); 3398 } 3399 if (has_dvb) { 3400 if (!dev->dvb_ep_isoc || (try_bulk && dev->dvb_ep_bulk)) 3401 dev->dvb_xfer_bulk = 1; 3402 3403 em28xx_info("dvb set to %s mode.\n", 3404 dev->dvb_xfer_bulk ? "bulk" : "isoc"); 3405 3406 /* pre-allocate DVB usb transfer buffers */ 3407 if (dev->dvb_xfer_bulk) { 3408 retval = em28xx_alloc_urbs(dev, EM28XX_DIGITAL_MODE, 3409 dev->dvb_xfer_bulk, 3410 EM28XX_DVB_NUM_BUFS, 3411 512, 3412 EM28XX_DVB_BULK_PACKET_MULTIPLIER); 3413 } else { 3414 retval = em28xx_alloc_urbs(dev, EM28XX_DIGITAL_MODE, 3415 dev->dvb_xfer_bulk, 3416 EM28XX_DVB_NUM_BUFS, 3417 dev->dvb_max_pkt_size_isoc, 3418 EM28XX_DVB_NUM_ISOC_PACKETS); 3419 } 3420 if (retval) { 3421 printk(DRIVER_NAME 3422 ": Failed to pre-allocate USB transfer buffers for DVB.\n"); 3423 goto unlock_and_free; 3424 } 3425 } 3426 3427 request_modules(dev); 3428 3429 /* Should be the last thing to do, to avoid newer udev's to 3430 open the device before fully initializing it 3431 */ 3432 mutex_unlock(&dev->lock); 3433 3434 return 0; 3435 3436 unlock_and_free: 3437 mutex_unlock(&dev->lock); 3438 3439 err_free: 3440 kfree(dev->alt_max_pkt_size_isoc); 3441 kfree(dev); 3442 3443 err: 3444 clear_bit(nr, &em28xx_devused); 3445 3446 err_no_slot: 3447 usb_put_dev(udev); 3448 return retval; 3449 } 3450 3451 /* 3452 * em28xx_usb_disconnect() 3453 * called when the device gets disconnected 3454 * video device will be unregistered on v4l2_close in case it is still open 3455 */ 3456 static void em28xx_usb_disconnect(struct usb_interface *interface) 3457 { 3458 struct em28xx *dev; 3459 3460 dev = usb_get_intfdata(interface); 3461 usb_set_intfdata(interface, NULL); 3462 3463 if (!dev) 3464 return; 3465 3466 dev->disconnected = 1; 3467 3468 if (dev->is_audio_only) { 3469 mutex_lock(&dev->lock); 3470 em28xx_close_extension(dev); 3471 mutex_unlock(&dev->lock); 3472 return; 3473 } 3474 3475 em28xx_info("disconnecting %s\n", dev->vdev->name); 3476 3477 flush_request_modules(dev); 3478 3479 mutex_lock(&dev->lock); 3480 3481 v4l2_device_disconnect(&dev->v4l2_dev); 3482 3483 if (dev->users) { 3484 em28xx_warn("device %s is open! Deregistration and memory deallocation are deferred on close.\n", 3485 video_device_node_name(dev->vdev)); 3486 3487 em28xx_uninit_usb_xfer(dev, EM28XX_ANALOG_MODE); 3488 em28xx_uninit_usb_xfer(dev, EM28XX_DIGITAL_MODE); 3489 } 3490 3491 em28xx_close_extension(dev); 3492 /* NOTE: must be called BEFORE the resources are released */ 3493 3494 if (!dev->users) 3495 em28xx_release_resources(dev); 3496 3497 mutex_unlock(&dev->lock); 3498 3499 if (!dev->users) { 3500 kfree(dev->alt_max_pkt_size_isoc); 3501 kfree(dev); 3502 } 3503 } 3504 3505 static struct usb_driver em28xx_usb_driver = { 3506 .name = "em28xx", 3507 .probe = em28xx_usb_probe, 3508 .disconnect = em28xx_usb_disconnect, 3509 .id_table = em28xx_id_table, 3510 }; 3511 3512 module_usb_driver(em28xx_usb_driver); 3513