1 /* 2 em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB 3 video capture devices 4 5 Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it> 6 Markus Rechberger <mrechberger@gmail.com> 7 Mauro Carvalho Chehab <mchehab@infradead.org> 8 Sascha Sommer <saschasommer@freenet.de> 9 Copyright (C) 2012 Frank Schäfer <fschaefer.oss@googlemail.com> 10 11 This program is free software; you can redistribute it and/or modify 12 it under the terms of the GNU General Public License as published by 13 the Free Software Foundation; either version 2 of the License, or 14 (at your option) any later version. 15 16 This program is distributed in the hope that it will be useful, 17 but WITHOUT ANY WARRANTY; without even the implied warranty of 18 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 GNU General Public License for more details. 20 21 You should have received a copy of the GNU General Public License 22 along with this program; if not, write to the Free Software 23 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 24 */ 25 26 #include "em28xx.h" 27 28 #include <linux/init.h> 29 #include <linux/module.h> 30 #include <linux/slab.h> 31 #include <linux/delay.h> 32 #include <linux/i2c.h> 33 #include <linux/usb.h> 34 #include <media/tuner.h> 35 #include <media/drv-intf/msp3400.h> 36 #include <media/i2c/saa7115.h> 37 #include <dt-bindings/media/tvp5150.h> 38 #include <media/i2c/tvaudio.h> 39 #include <media/i2c-addr.h> 40 #include <media/tveeprom.h> 41 #include <media/v4l2-common.h> 42 #include <sound/ac97_codec.h> 43 44 45 #define DRIVER_NAME "em28xx" 46 47 static int tuner = -1; 48 module_param(tuner, int, 0444); 49 MODULE_PARM_DESC(tuner, "tuner type"); 50 51 static unsigned int disable_ir; 52 module_param(disable_ir, int, 0444); 53 MODULE_PARM_DESC(disable_ir, "disable infrared remote support"); 54 55 static unsigned int disable_usb_speed_check; 56 module_param(disable_usb_speed_check, int, 0444); 57 MODULE_PARM_DESC(disable_usb_speed_check, 58 "override min bandwidth requirement of 480M bps"); 59 60 static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U }; 61 module_param_array(card, int, NULL, 0444); 62 MODULE_PARM_DESC(card, "card type"); 63 64 static int usb_xfer_mode = -1; 65 module_param(usb_xfer_mode, int, 0444); 66 MODULE_PARM_DESC(usb_xfer_mode, 67 "USB transfer mode for frame data (-1 = auto, 0 = prefer isoc, 1 = prefer bulk)"); 68 69 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */ 70 static DECLARE_BITMAP(em28xx_devused, EM28XX_MAXBOARDS); 71 72 struct em28xx_hash_table { 73 unsigned long hash; 74 unsigned int model; 75 unsigned int tuner; 76 }; 77 78 static void em28xx_pre_card_setup(struct em28xx *dev); 79 80 /* 81 * Reset sequences for analog/digital modes 82 */ 83 84 /* Reset for the most [analog] boards */ 85 static struct em28xx_reg_seq default_analog[] = { 86 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 87 { -1, -1, -1, -1}, 88 }; 89 90 /* Reset for the most [digital] boards */ 91 static struct em28xx_reg_seq default_digital[] = { 92 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 93 { -1, -1, -1, -1}, 94 }; 95 96 /* Board Hauppauge WinTV HVR 900 analog */ 97 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = { 98 {EM2820_R08_GPIO_CTRL, 0x2d, ~EM_GPIO_4, 10}, 99 { 0x05, 0xff, 0x10, 10}, 100 { -1, -1, -1, -1}, 101 }; 102 103 /* Board Hauppauge WinTV HVR 900 digital */ 104 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = { 105 {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10}, 106 {EM2880_R04_GPO, 0x04, 0x0f, 10}, 107 {EM2880_R04_GPO, 0x0c, 0x0f, 10}, 108 { -1, -1, -1, -1}, 109 }; 110 111 /* Board Hauppauge WinTV HVR 900 (R2) digital */ 112 static struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = { 113 {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10}, 114 {EM2880_R04_GPO, 0x0c, 0x0f, 10}, 115 { -1, -1, -1, -1}, 116 }; 117 118 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */ 119 static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = { 120 {EM2820_R08_GPIO_CTRL, 0x69, ~EM_GPIO_4, 10}, 121 { -1, -1, -1, -1}, 122 }; 123 124 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */ 125 126 /* Board - EM2870 Kworld 355u 127 Analog - No input analog */ 128 129 /* Board - EM2882 Kworld 315U digital */ 130 static struct em28xx_reg_seq em2882_kworld_315u_digital[] = { 131 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 132 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, 133 {EM2880_R04_GPO, 0x04, 0xff, 10}, 134 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 135 {EM2820_R08_GPIO_CTRL, 0x7e, 0xff, 10}, 136 { -1, -1, -1, -1}, 137 }; 138 139 static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = { 140 {EM2880_R04_GPO, 0x08, 0xff, 10}, 141 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 142 {EM2880_R04_GPO, 0x08, 0xff, 10}, 143 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 144 { -1, -1, -1, -1}, 145 }; 146 147 static struct em28xx_reg_seq kworld_330u_analog[] = { 148 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 149 {EM2880_R04_GPO, 0x00, 0xff, 10}, 150 { -1, -1, -1, -1}, 151 }; 152 153 static struct em28xx_reg_seq kworld_330u_digital[] = { 154 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 155 {EM2880_R04_GPO, 0x08, 0xff, 10}, 156 { -1, -1, -1, -1}, 157 }; 158 159 /* Evga inDtube 160 GPIO0 - Enable digital power (s5h1409) - low to enable 161 GPIO1 - Enable analog power (tvp5150/emp202) - low to enable 162 GPIO4 - xc3028 reset 163 GOP3 - s5h1409 reset 164 */ 165 static struct em28xx_reg_seq evga_indtube_analog[] = { 166 {EM2820_R08_GPIO_CTRL, 0x79, 0xff, 60}, 167 { -1, -1, -1, -1}, 168 }; 169 170 static struct em28xx_reg_seq evga_indtube_digital[] = { 171 {EM2820_R08_GPIO_CTRL, 0x7a, 0xff, 1}, 172 {EM2880_R04_GPO, 0x04, 0xff, 10}, 173 {EM2880_R04_GPO, 0x0c, 0xff, 1}, 174 { -1, -1, -1, -1}, 175 }; 176 177 /* 178 * KWorld PlusTV 340U, UB435-Q and UB435-Q V2 (ATSC) GPIOs map: 179 * EM_GPIO_0 - currently unknown 180 * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on) 181 * EM_GPIO_2 - currently unknown 182 * EM_GPIO_3 - currently unknown 183 * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset) 184 * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset) 185 * EM_GPIO_6 - currently unknown 186 * EM_GPIO_7 - currently unknown 187 */ 188 static struct em28xx_reg_seq kworld_a340_digital[] = { 189 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 190 { -1, -1, -1, -1}, 191 }; 192 193 static struct em28xx_reg_seq kworld_ub435q_v3_digital[] = { 194 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100}, 195 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100}, 196 {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 100}, 197 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100}, 198 { -1, -1, -1, -1}, 199 }; 200 201 /* Pinnacle Hybrid Pro eb1a:2881 */ 202 static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = { 203 {EM2820_R08_GPIO_CTRL, 0xfd, ~EM_GPIO_4, 10}, 204 { -1, -1, -1, -1}, 205 }; 206 207 static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = { 208 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 209 {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */ 210 {EM2880_R04_GPO, 0x0c, 0xff, 1}, 211 { -1, -1, -1, -1}, 212 }; 213 214 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = { 215 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 216 {EM2880_R04_GPO, 0x00, 0xff, 10}, 217 { -1, -1, -1, -1}, 218 }; 219 220 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = { 221 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 222 {EM2880_R04_GPO, 0x08, 0xff, 10}, 223 { -1, -1, -1, -1}, 224 }; 225 226 /* PCTV HD Mini (80e) GPIOs 227 0-5: not used 228 6: demod reset, active low 229 7: LED on, active high */ 230 static struct em28xx_reg_seq em2874_pctv_80e_digital[] = { 231 {EM28XX_R06_I2C_CLK, 0x45, 0xff, 10}, /*400 KHz*/ 232 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 100},/*Demod reset*/ 233 {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 10}, 234 { -1, -1, -1, -1}, 235 }; 236 237 /* eb1a:2868 Reddo DVB-C USB TV Box 238 GPIO4 - CU1216L NIM 239 Other GPIOs seems to be don't care. */ 240 static struct em28xx_reg_seq reddo_dvb_c_usb_box[] = { 241 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, 242 {EM2820_R08_GPIO_CTRL, 0xde, 0xff, 10}, 243 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, 244 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 245 {EM2820_R08_GPIO_CTRL, 0x7f, 0xff, 10}, 246 {EM2820_R08_GPIO_CTRL, 0x6f, 0xff, 10}, 247 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 248 { -1, -1, -1, -1}, 249 }; 250 251 /* Callback for the most boards */ 252 static struct em28xx_reg_seq default_tuner_gpio[] = { 253 {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10}, 254 {EM2820_R08_GPIO_CTRL, 0, EM_GPIO_4, 10}, 255 {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10}, 256 { -1, -1, -1, -1}, 257 }; 258 259 /* Mute/unmute */ 260 static struct em28xx_reg_seq compro_unmute_tv_gpio[] = { 261 {EM2820_R08_GPIO_CTRL, 5, 7, 10}, 262 { -1, -1, -1, -1}, 263 }; 264 265 static struct em28xx_reg_seq compro_unmute_svid_gpio[] = { 266 {EM2820_R08_GPIO_CTRL, 4, 7, 10}, 267 { -1, -1, -1, -1}, 268 }; 269 270 static struct em28xx_reg_seq compro_mute_gpio[] = { 271 {EM2820_R08_GPIO_CTRL, 6, 7, 10}, 272 { -1, -1, -1, -1}, 273 }; 274 275 /* Terratec AV350 */ 276 static struct em28xx_reg_seq terratec_av350_mute_gpio[] = { 277 {EM2820_R08_GPIO_CTRL, 0xff, 0x7f, 10}, 278 { -1, -1, -1, -1}, 279 }; 280 281 static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = { 282 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 283 { -1, -1, -1, -1}, 284 }; 285 286 static struct em28xx_reg_seq silvercrest_reg_seq[] = { 287 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 288 {EM2820_R08_GPIO_CTRL, 0x01, 0xf7, 10}, 289 { -1, -1, -1, -1}, 290 }; 291 292 static struct em28xx_reg_seq vc211a_enable[] = { 293 {EM2820_R08_GPIO_CTRL, 0xff, 0x07, 10}, 294 {EM2820_R08_GPIO_CTRL, 0xff, 0x0f, 10}, 295 {EM2820_R08_GPIO_CTRL, 0xff, 0x0b, 10}, 296 { -1, -1, -1, -1}, 297 }; 298 299 static struct em28xx_reg_seq dikom_dk300_digital[] = { 300 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 301 {EM2880_R04_GPO, 0x08, 0xff, 10}, 302 { -1, -1, -1, -1}, 303 }; 304 305 /* Reset for the most [digital] boards */ 306 static struct em28xx_reg_seq leadership_digital[] = { 307 {EM2874_R80_GPIO_P0_CTRL, 0x70, 0xff, 10}, 308 { -1, -1, -1, -1}, 309 }; 310 311 static struct em28xx_reg_seq leadership_reset[] = { 312 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10}, 313 {EM2874_R80_GPIO_P0_CTRL, 0xb0, 0xff, 10}, 314 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10}, 315 { -1, -1, -1, -1}, 316 }; 317 318 /* 2013:024f PCTV nanoStick T2 290e 319 * GPIO_6 - demod reset 320 * GPIO_7 - LED 321 */ 322 static struct em28xx_reg_seq pctv_290e[] = { 323 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 80}, 324 {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 80}, /* GPIO_6 = 1 */ 325 {EM2874_R80_GPIO_P0_CTRL, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */ 326 { -1, -1, -1, -1}, 327 }; 328 329 #if 0 330 static struct em28xx_reg_seq terratec_h5_gpio[] = { 331 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 332 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100}, 333 {EM2874_R80_GPIO_P0_CTRL, 0xf2, 0xff, 50}, 334 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 50}, 335 { -1, -1, -1, -1}, 336 }; 337 338 static struct em28xx_reg_seq terratec_h5_digital[] = { 339 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10}, 340 {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, 341 {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10}, 342 { -1, -1, -1, -1}, 343 }; 344 #endif 345 346 /* 2013:024f PCTV DVB-S2 Stick 460e 347 * GPIO_0 - POWER_ON 348 * GPIO_1 - BOOST 349 * GPIO_2 - VUV_LNB (red LED) 350 * GPIO_3 - EXT_12V 351 * GPIO_4 - INT_DEM (DEMOD GPIO_0) 352 * GPIO_5 - INT_LNB 353 * GPIO_6 - RESET_DEM 354 * GPIO_7 - LED (green LED) 355 */ 356 static struct em28xx_reg_seq pctv_460e[] = { 357 {EM2874_R80_GPIO_P0_CTRL, 0x01, 0xff, 50}, 358 { 0x0d, 0xff, 0xff, 50}, 359 {EM2874_R80_GPIO_P0_CTRL, 0x41, 0xff, 50}, /* GPIO_6=1 */ 360 { 0x0d, 0x42, 0xff, 50}, 361 {EM2874_R80_GPIO_P0_CTRL, 0x61, 0xff, 50}, /* GPIO_5=1 */ 362 { -1, -1, -1, -1}, 363 }; 364 365 static struct em28xx_reg_seq c3tech_digital_duo_digital[] = { 366 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10}, 367 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, /* xc5000 reset */ 368 {EM2874_R80_GPIO_P0_CTRL, 0xf9, 0xff, 35}, 369 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, 370 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10}, 371 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 10}, 372 {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 10}, 373 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 20}, 374 { -1, -1, -1, -1}, 375 }; 376 377 /* 378 * 2013:0258 PCTV DVB-S2 Stick (461e) 379 * GPIO 0 = POWER_ON 380 * GPIO 1 = BOOST 381 * GPIO 2 = VUV_LNB (red LED) 382 * GPIO 3 = #EXT_12V 383 * GPIO 4 = INT_DEM 384 * GPIO 5 = INT_LNB 385 * GPIO 6 = #RESET_DEM 386 * GPIO 7 = P07_LED (green LED) 387 */ 388 static struct em28xx_reg_seq pctv_461e[] = { 389 {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 0}, 390 {0x0d, 0xff, 0xff, 0}, 391 {EM2874_R80_GPIO_P0_CTRL, 0x3f, 0xff, 100}, /* reset demod */ 392 {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 200}, /* reset demod */ 393 {0x0d, 0x42, 0xff, 0}, 394 {EM2874_R80_GPIO_P0_CTRL, 0xeb, 0xff, 0}, 395 {EM2874_R5F_TS_ENABLE, 0x84, 0x84, 0}, /* parallel? | null discard */ 396 { -1, -1, -1, -1}, 397 }; 398 399 #if 0 400 static struct em28xx_reg_seq hauppauge_930c_gpio[] = { 401 {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10}, 402 {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, /* xc5000 reset */ 403 {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10}, 404 {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, 405 { -1, -1, -1, -1}, 406 }; 407 408 static struct em28xx_reg_seq hauppauge_930c_digital[] = { 409 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10}, 410 {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, 411 {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10}, 412 { -1, -1, -1, -1}, 413 }; 414 #endif 415 416 /* 1b80:e425 MaxMedia UB425-TC 417 * 1b80:e1cc Delock 61959 418 * GPIO_6 - demod reset, 0=active 419 * GPIO_7 - LED, 0=active 420 */ 421 static struct em28xx_reg_seq maxmedia_ub425_tc[] = { 422 {EM2874_R80_GPIO_P0_CTRL, 0x83, 0xff, 100}, 423 {EM2874_R80_GPIO_P0_CTRL, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */ 424 {EM2874_R80_GPIO_P0_CTRL, 0x43, 0xff, 000}, /* GPIO_7 = 0 */ 425 { -1, -1, -1, -1}, 426 }; 427 428 /* 2304:0242 PCTV QuatroStick (510e) 429 * GPIO_2: decoder reset, 0=active 430 * GPIO_4: decoder suspend, 0=active 431 * GPIO_6: demod reset, 0=active 432 * GPIO_7: LED, 1=active 433 */ 434 static struct em28xx_reg_seq pctv_510e[] = { 435 {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100}, 436 {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ 437 {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ 438 { -1, -1, -1, -1}, 439 }; 440 441 /* 2013:0251 PCTV QuatroStick nano (520e) 442 * GPIO_2: decoder reset, 0=active 443 * GPIO_4: decoder suspend, 0=active 444 * GPIO_6: demod reset, 0=active 445 * GPIO_7: LED, 1=active 446 */ 447 static struct em28xx_reg_seq pctv_520e[] = { 448 {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100}, 449 {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ 450 {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ 451 {EM2874_R80_GPIO_P0_CTRL, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */ 452 { -1, -1, -1, -1}, 453 }; 454 455 /* 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam 456 * reg 0x80/0x84: 457 * GPIO_0: capturing LED, 0=on, 1=off 458 * GPIO_2: AV mute button, 0=pressed, 1=unpressed 459 * GPIO 3: illumination button, 0=pressed, 1=unpressed 460 * GPIO_6: illumination/flash LED, 0=on, 1=off 461 * reg 0x81/0x85: 462 * GPIO_7: snapshot button, 0=pressed, 1=unpressed 463 */ 464 static struct em28xx_reg_seq speedlink_vad_laplace_reg_seq[] = { 465 {EM2820_R08_GPIO_CTRL, 0xf7, 0xff, 10}, 466 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xb2, 10}, 467 { -1, -1, -1, -1}, 468 }; 469 470 static struct em28xx_reg_seq pctv_292e[] = { 471 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, 472 {0x0d, 0xff, 0xff, 950}, 473 {EM2874_R80_GPIO_P0_CTRL, 0xbd, 0xff, 100}, 474 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 410}, 475 {EM2874_R80_GPIO_P0_CTRL, 0x7d, 0xff, 300}, 476 {EM2874_R80_GPIO_P0_CTRL, 0x7c, 0xff, 60}, 477 {0x0d, 0x42, 0xff, 50}, 478 {EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0}, 479 {-1, -1, -1, -1}, 480 }; 481 482 static struct em28xx_reg_seq terratec_t2_stick_hd[] = { 483 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, 484 {0x0d, 0xff, 0xff, 600}, 485 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 10}, 486 {EM2874_R80_GPIO_P0_CTRL, 0xbc, 0xff, 100}, 487 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 100}, 488 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 300}, 489 {EM2874_R80_GPIO_P0_CTRL, 0xf8, 0xff, 100}, 490 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 300}, 491 {0x0d, 0x42, 0xff, 1000}, 492 {EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0}, 493 {-1, -1, -1, -1}, 494 }; 495 496 static struct em28xx_reg_seq plex_px_bcud[] = { 497 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, 498 {0x0d, 0xff, 0xff, 0}, 499 {EM2874_R50_IR_CONFIG, 0x01, 0xff, 0}, 500 {EM28XX_R06_I2C_CLK, 0x40, 0xff, 0}, 501 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 100}, 502 {EM28XX_R12_VINENABLE, 0x20, 0x20, 0}, 503 {0x0d, 0x42, 0xff, 1000}, 504 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 10}, 505 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, 506 {0x73, 0xfd, 0xff, 100}, 507 {-1, -1, -1, -1}, 508 }; 509 510 /* 511 * 2040:0265 Hauppauge WinTV-dualHD DVB 512 * 2040:026d Hauppauge WinTV-dualHD ATSC/QAM 513 * reg 0x80/0x84: 514 * GPIO_0: Yellow LED tuner 1, 0=on, 1=off 515 * GPIO_1: Green LED tuner 1, 0=on, 1=off 516 * GPIO_2: Yellow LED tuner 2, 0=on, 1=off 517 * GPIO_3: Green LED tuner 2, 0=on, 1=off 518 * GPIO_5: Reset #2, 0=active 519 * GPIO_6: Reset #1, 0=active 520 */ 521 static struct em28xx_reg_seq hauppauge_dualhd_dvb[] = { 522 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, 523 {0x0d, 0xff, 0xff, 200}, 524 {0x50, 0x04, 0xff, 300}, 525 {EM2874_R80_GPIO_P0_CTRL, 0xbf, 0xff, 100}, /* demod 1 reset */ 526 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100}, 527 {EM2874_R80_GPIO_P0_CTRL, 0xdf, 0xff, 100}, /* demod 2 reset */ 528 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100}, 529 {EM2874_R5F_TS_ENABLE, 0x44, 0xff, 50}, 530 {EM2874_R5D_TS1_PKT_SIZE, 0x05, 0xff, 50}, 531 {EM2874_R5E_TS2_PKT_SIZE, 0x05, 0xff, 50}, 532 {-1, -1, -1, -1}, 533 }; 534 535 /* 536 * Button definitions 537 */ 538 static struct em28xx_button std_snapshot_button[] = { 539 { 540 .role = EM28XX_BUTTON_SNAPSHOT, 541 .reg_r = EM28XX_R0C_USBSUSP, 542 .reg_clearing = EM28XX_R0C_USBSUSP, 543 .mask = EM28XX_R0C_USBSUSP_SNAPSHOT, 544 .inverted = 0, 545 }, 546 {-1, 0, 0, 0, 0}, 547 }; 548 549 static struct em28xx_button speedlink_vad_laplace_buttons[] = { 550 { 551 .role = EM28XX_BUTTON_SNAPSHOT, 552 .reg_r = EM2874_R85_GPIO_P1_STATE, 553 .mask = 0x80, 554 .inverted = 1, 555 }, 556 { 557 .role = EM28XX_BUTTON_ILLUMINATION, 558 .reg_r = EM2874_R84_GPIO_P0_STATE, 559 .mask = 0x08, 560 .inverted = 1, 561 }, 562 {-1, 0, 0, 0, 0}, 563 }; 564 565 /* 566 * LED definitions 567 */ 568 static struct em28xx_led speedlink_vad_laplace_leds[] = { 569 { 570 .role = EM28XX_LED_ANALOG_CAPTURING, 571 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 572 .gpio_mask = 0x01, 573 .inverted = 1, 574 }, 575 { 576 .role = EM28XX_LED_ILLUMINATION, 577 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 578 .gpio_mask = 0x40, 579 .inverted = 1, 580 }, 581 {-1, 0, 0, 0}, 582 }; 583 584 static struct em28xx_led kworld_ub435q_v3_leds[] = { 585 { 586 .role = EM28XX_LED_DIGITAL_CAPTURING, 587 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 588 .gpio_mask = 0x80, 589 .inverted = 1, 590 }, 591 {-1, 0, 0, 0}, 592 }; 593 594 static struct em28xx_led pctv_80e_leds[] = { 595 { 596 .role = EM28XX_LED_DIGITAL_CAPTURING, 597 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 598 .gpio_mask = 0x80, 599 .inverted = 0, 600 }, 601 {-1, 0, 0, 0}, 602 }; 603 604 static struct em28xx_led terratec_grabby_leds[] = { 605 { 606 .role = EM28XX_LED_ANALOG_CAPTURING, 607 .gpio_reg = EM2820_R08_GPIO_CTRL, 608 .gpio_mask = EM_GPIO_3, 609 .inverted = 1, 610 }, 611 {-1, 0, 0, 0}, 612 }; 613 614 static struct em28xx_led hauppauge_dualhd_leds[] = { 615 { 616 .role = EM28XX_LED_DIGITAL_CAPTURING, 617 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 618 .gpio_mask = EM_GPIO_1, 619 .inverted = 1, 620 }, 621 { 622 .role = EM28XX_LED_DIGITAL_CAPTURING_TS2, 623 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 624 .gpio_mask = EM_GPIO_3, 625 .inverted = 1, 626 }, 627 {-1, 0, 0, 0}, 628 }; 629 630 /* 631 * Board definitions 632 */ 633 struct em28xx_board em28xx_boards[] = { 634 [EM2750_BOARD_UNKNOWN] = { 635 .name = "EM2710/EM2750/EM2751 webcam grabber", 636 .xclk = EM28XX_XCLK_FREQUENCY_20MHZ, 637 .tuner_type = TUNER_ABSENT, 638 .is_webcam = 1, 639 .input = { { 640 .type = EM28XX_VMUX_COMPOSITE, 641 .vmux = 0, 642 .amux = EM28XX_AMUX_VIDEO, 643 .gpio = silvercrest_reg_seq, 644 } }, 645 }, 646 [EM2800_BOARD_UNKNOWN] = { 647 .name = "Unknown EM2800 video grabber", 648 .is_em2800 = 1, 649 .tda9887_conf = TDA9887_PRESENT, 650 .decoder = EM28XX_SAA711X, 651 .tuner_type = TUNER_ABSENT, 652 .input = { { 653 .type = EM28XX_VMUX_COMPOSITE, 654 .vmux = SAA7115_COMPOSITE0, 655 .amux = EM28XX_AMUX_LINE_IN, 656 }, { 657 .type = EM28XX_VMUX_SVIDEO, 658 .vmux = SAA7115_SVIDEO3, 659 .amux = EM28XX_AMUX_LINE_IN, 660 } }, 661 }, 662 [EM2820_BOARD_UNKNOWN] = { 663 .name = "Unknown EM2750/28xx video grabber", 664 .tuner_type = TUNER_ABSENT, 665 .is_webcam = 1, /* To enable sensor probe */ 666 }, 667 [EM2750_BOARD_DLCW_130] = { 668 /* Beijing Huaqi Information Digital Technology Co., Ltd */ 669 .name = "Huaqi DLCW-130", 670 .valid = EM28XX_BOARD_NOT_VALIDATED, 671 .xclk = EM28XX_XCLK_FREQUENCY_48MHZ, 672 .tuner_type = TUNER_ABSENT, 673 .is_webcam = 1, 674 .input = { { 675 .type = EM28XX_VMUX_COMPOSITE, 676 .vmux = 0, 677 .amux = EM28XX_AMUX_VIDEO, 678 } }, 679 }, 680 [EM2820_BOARD_KWORLD_PVRTV2800RF] = { 681 .name = "Kworld PVR TV 2800 RF", 682 .tuner_type = TUNER_TEMIC_PAL, 683 .tda9887_conf = TDA9887_PRESENT, 684 .decoder = EM28XX_SAA711X, 685 .input = { { 686 .type = EM28XX_VMUX_COMPOSITE, 687 .vmux = SAA7115_COMPOSITE0, 688 .amux = EM28XX_AMUX_LINE_IN, 689 }, { 690 .type = EM28XX_VMUX_SVIDEO, 691 .vmux = SAA7115_SVIDEO3, 692 .amux = EM28XX_AMUX_LINE_IN, 693 } }, 694 }, 695 [EM2820_BOARD_GADMEI_TVR200] = { 696 .name = "Gadmei TVR200", 697 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 698 .tda9887_conf = TDA9887_PRESENT, 699 .decoder = EM28XX_SAA711X, 700 .input = { { 701 .type = EM28XX_VMUX_TELEVISION, 702 .vmux = SAA7115_COMPOSITE2, 703 .amux = EM28XX_AMUX_LINE_IN, 704 }, { 705 .type = EM28XX_VMUX_COMPOSITE, 706 .vmux = SAA7115_COMPOSITE0, 707 .amux = EM28XX_AMUX_LINE_IN, 708 }, { 709 .type = EM28XX_VMUX_SVIDEO, 710 .vmux = SAA7115_SVIDEO3, 711 .amux = EM28XX_AMUX_LINE_IN, 712 } }, 713 }, 714 [EM2820_BOARD_TERRATEC_CINERGY_250] = { 715 .name = "Terratec Cinergy 250 USB", 716 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 717 .has_ir_i2c = 1, 718 .tda9887_conf = TDA9887_PRESENT, 719 .decoder = EM28XX_SAA711X, 720 .input = { { 721 .type = EM28XX_VMUX_TELEVISION, 722 .vmux = SAA7115_COMPOSITE2, 723 .amux = EM28XX_AMUX_VIDEO, 724 }, { 725 .type = EM28XX_VMUX_COMPOSITE, 726 .vmux = SAA7115_COMPOSITE0, 727 .amux = EM28XX_AMUX_LINE_IN, 728 }, { 729 .type = EM28XX_VMUX_SVIDEO, 730 .vmux = SAA7115_SVIDEO3, 731 .amux = EM28XX_AMUX_LINE_IN, 732 } }, 733 }, 734 [EM2820_BOARD_PINNACLE_USB_2] = { 735 .name = "Pinnacle PCTV USB 2", 736 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 737 .has_ir_i2c = 1, 738 .tda9887_conf = TDA9887_PRESENT, 739 .decoder = EM28XX_SAA711X, 740 .input = { { 741 .type = EM28XX_VMUX_TELEVISION, 742 .vmux = SAA7115_COMPOSITE2, 743 .amux = EM28XX_AMUX_VIDEO, 744 }, { 745 .type = EM28XX_VMUX_COMPOSITE, 746 .vmux = SAA7115_COMPOSITE0, 747 .amux = EM28XX_AMUX_LINE_IN, 748 }, { 749 .type = EM28XX_VMUX_SVIDEO, 750 .vmux = SAA7115_SVIDEO3, 751 .amux = EM28XX_AMUX_LINE_IN, 752 } }, 753 }, 754 [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = { 755 .name = "Hauppauge WinTV USB 2", 756 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 757 .tda9887_conf = TDA9887_PRESENT | 758 TDA9887_PORT1_ACTIVE | 759 TDA9887_PORT2_ACTIVE, 760 .decoder = EM28XX_TVP5150, 761 .has_msp34xx = 1, 762 .has_ir_i2c = 1, 763 .input = { { 764 .type = EM28XX_VMUX_TELEVISION, 765 .vmux = TVP5150_COMPOSITE0, 766 .amux = MSP_INPUT_DEFAULT, 767 }, { 768 .type = EM28XX_VMUX_SVIDEO, 769 .vmux = TVP5150_SVIDEO, 770 .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1, 771 MSP_DSP_IN_SCART, MSP_DSP_IN_SCART), 772 } }, 773 }, 774 [EM2820_BOARD_DLINK_USB_TV] = { 775 .name = "D-Link DUB-T210 TV Tuner", 776 .valid = EM28XX_BOARD_NOT_VALIDATED, 777 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 778 .tda9887_conf = TDA9887_PRESENT, 779 .decoder = EM28XX_SAA711X, 780 .input = { { 781 .type = EM28XX_VMUX_TELEVISION, 782 .vmux = SAA7115_COMPOSITE2, 783 .amux = EM28XX_AMUX_LINE_IN, 784 }, { 785 .type = EM28XX_VMUX_COMPOSITE, 786 .vmux = SAA7115_COMPOSITE0, 787 .amux = EM28XX_AMUX_LINE_IN, 788 }, { 789 .type = EM28XX_VMUX_SVIDEO, 790 .vmux = SAA7115_SVIDEO3, 791 .amux = EM28XX_AMUX_LINE_IN, 792 } }, 793 }, 794 [EM2820_BOARD_HERCULES_SMART_TV_USB2] = { 795 .name = "Hercules Smart TV USB 2.0", 796 .valid = EM28XX_BOARD_NOT_VALIDATED, 797 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 798 .tda9887_conf = TDA9887_PRESENT, 799 .decoder = EM28XX_SAA711X, 800 .input = { { 801 .type = EM28XX_VMUX_TELEVISION, 802 .vmux = SAA7115_COMPOSITE2, 803 .amux = EM28XX_AMUX_LINE_IN, 804 }, { 805 .type = EM28XX_VMUX_COMPOSITE, 806 .vmux = SAA7115_COMPOSITE0, 807 .amux = EM28XX_AMUX_LINE_IN, 808 }, { 809 .type = EM28XX_VMUX_SVIDEO, 810 .vmux = SAA7115_SVIDEO3, 811 .amux = EM28XX_AMUX_LINE_IN, 812 } }, 813 }, 814 [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = { 815 .name = "Pinnacle PCTV USB 2 (Philips FM1216ME)", 816 .valid = EM28XX_BOARD_NOT_VALIDATED, 817 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, 818 .tda9887_conf = TDA9887_PRESENT, 819 .decoder = EM28XX_SAA711X, 820 .input = { { 821 .type = EM28XX_VMUX_TELEVISION, 822 .vmux = SAA7115_COMPOSITE2, 823 .amux = EM28XX_AMUX_VIDEO, 824 }, { 825 .type = EM28XX_VMUX_COMPOSITE, 826 .vmux = SAA7115_COMPOSITE0, 827 .amux = EM28XX_AMUX_LINE_IN, 828 }, { 829 .type = EM28XX_VMUX_SVIDEO, 830 .vmux = SAA7115_SVIDEO3, 831 .amux = EM28XX_AMUX_LINE_IN, 832 } }, 833 }, 834 [EM2820_BOARD_GADMEI_UTV310] = { 835 .name = "Gadmei UTV310", 836 .valid = EM28XX_BOARD_NOT_VALIDATED, 837 .tuner_type = TUNER_TNF_5335MF, 838 .tda9887_conf = TDA9887_PRESENT, 839 .decoder = EM28XX_SAA711X, 840 .input = { { 841 .type = EM28XX_VMUX_TELEVISION, 842 .vmux = SAA7115_COMPOSITE1, 843 .amux = EM28XX_AMUX_LINE_IN, 844 }, { 845 .type = EM28XX_VMUX_COMPOSITE, 846 .vmux = SAA7115_COMPOSITE0, 847 .amux = EM28XX_AMUX_LINE_IN, 848 }, { 849 .type = EM28XX_VMUX_SVIDEO, 850 .vmux = SAA7115_SVIDEO3, 851 .amux = EM28XX_AMUX_LINE_IN, 852 } }, 853 }, 854 [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = { 855 .name = "Leadtek Winfast USB II Deluxe", 856 .valid = EM28XX_BOARD_NOT_VALIDATED, 857 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, 858 .has_ir_i2c = 1, 859 .tvaudio_addr = 0x58, 860 .tda9887_conf = TDA9887_PRESENT | 861 TDA9887_PORT2_ACTIVE | 862 TDA9887_QSS, 863 .decoder = EM28XX_SAA711X, 864 .adecoder = EM28XX_TVAUDIO, 865 .input = { { 866 .type = EM28XX_VMUX_TELEVISION, 867 .vmux = SAA7115_COMPOSITE4, 868 .amux = EM28XX_AMUX_AUX, 869 }, { 870 .type = EM28XX_VMUX_COMPOSITE, 871 .vmux = SAA7115_COMPOSITE5, 872 .amux = EM28XX_AMUX_LINE_IN, 873 }, { 874 .type = EM28XX_VMUX_SVIDEO, 875 .vmux = SAA7115_SVIDEO3, 876 .amux = EM28XX_AMUX_LINE_IN, 877 } }, 878 .radio = { 879 .type = EM28XX_RADIO, 880 .amux = EM28XX_AMUX_AUX, 881 } 882 }, 883 [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = { 884 .name = "Videology 20K14XUSB USB2.0", 885 .valid = EM28XX_BOARD_NOT_VALIDATED, 886 .tuner_type = TUNER_ABSENT, 887 .is_webcam = 1, 888 .input = { { 889 .type = EM28XX_VMUX_COMPOSITE, 890 .vmux = 0, 891 .amux = EM28XX_AMUX_VIDEO, 892 } }, 893 }, 894 [EM2820_BOARD_SILVERCREST_WEBCAM] = { 895 .name = "Silvercrest Webcam 1.3mpix", 896 .tuner_type = TUNER_ABSENT, 897 .is_webcam = 1, 898 .input = { { 899 .type = EM28XX_VMUX_COMPOSITE, 900 .vmux = 0, 901 .amux = EM28XX_AMUX_VIDEO, 902 .gpio = silvercrest_reg_seq, 903 } }, 904 }, 905 [EM2821_BOARD_SUPERCOMP_USB_2] = { 906 .name = "Supercomp USB 2.0 TV", 907 .valid = EM28XX_BOARD_NOT_VALIDATED, 908 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 909 .tda9887_conf = TDA9887_PRESENT | 910 TDA9887_PORT1_ACTIVE | 911 TDA9887_PORT2_ACTIVE, 912 .decoder = EM28XX_SAA711X, 913 .input = { { 914 .type = EM28XX_VMUX_TELEVISION, 915 .vmux = SAA7115_COMPOSITE2, 916 .amux = EM28XX_AMUX_LINE_IN, 917 }, { 918 .type = EM28XX_VMUX_COMPOSITE, 919 .vmux = SAA7115_COMPOSITE0, 920 .amux = EM28XX_AMUX_VIDEO, 921 }, { 922 .type = EM28XX_VMUX_SVIDEO, 923 .vmux = SAA7115_SVIDEO3, 924 .amux = EM28XX_AMUX_LINE_IN, 925 } }, 926 }, 927 [EM2821_BOARD_USBGEAR_VD204] = { 928 .name = "Usbgear VD204v9", 929 .valid = EM28XX_BOARD_NOT_VALIDATED, 930 .tuner_type = TUNER_ABSENT, /* Capture only device */ 931 .decoder = EM28XX_SAA711X, 932 .input = { { 933 .type = EM28XX_VMUX_COMPOSITE, 934 .vmux = SAA7115_COMPOSITE0, 935 .amux = EM28XX_AMUX_LINE_IN, 936 }, { 937 .type = EM28XX_VMUX_SVIDEO, 938 .vmux = SAA7115_SVIDEO3, 939 .amux = EM28XX_AMUX_LINE_IN, 940 } }, 941 }, 942 [EM2860_BOARD_NETGMBH_CAM] = { 943 /* Beijing Huaqi Information Digital Technology Co., Ltd */ 944 .name = "NetGMBH Cam", 945 .valid = EM28XX_BOARD_NOT_VALIDATED, 946 .tuner_type = TUNER_ABSENT, 947 .is_webcam = 1, 948 .input = { { 949 .type = EM28XX_VMUX_COMPOSITE, 950 .vmux = 0, 951 .amux = EM28XX_AMUX_VIDEO, 952 } }, 953 }, 954 [EM2860_BOARD_TYPHOON_DVD_MAKER] = { 955 .name = "Typhoon DVD Maker", 956 .decoder = EM28XX_SAA711X, 957 .tuner_type = TUNER_ABSENT, /* Capture only device */ 958 .input = { { 959 .type = EM28XX_VMUX_COMPOSITE, 960 .vmux = SAA7115_COMPOSITE0, 961 .amux = EM28XX_AMUX_LINE_IN, 962 }, { 963 .type = EM28XX_VMUX_SVIDEO, 964 .vmux = SAA7115_SVIDEO3, 965 .amux = EM28XX_AMUX_LINE_IN, 966 } }, 967 }, 968 [EM2860_BOARD_GADMEI_UTV330] = { 969 .name = "Gadmei UTV330", 970 .valid = EM28XX_BOARD_NOT_VALIDATED, 971 .tuner_type = TUNER_TNF_5335MF, 972 .tda9887_conf = TDA9887_PRESENT, 973 .decoder = EM28XX_SAA711X, 974 .input = { { 975 .type = EM28XX_VMUX_TELEVISION, 976 .vmux = SAA7115_COMPOSITE2, 977 .amux = EM28XX_AMUX_VIDEO, 978 }, { 979 .type = EM28XX_VMUX_COMPOSITE, 980 .vmux = SAA7115_COMPOSITE0, 981 .amux = EM28XX_AMUX_LINE_IN, 982 }, { 983 .type = EM28XX_VMUX_SVIDEO, 984 .vmux = SAA7115_SVIDEO3, 985 .amux = EM28XX_AMUX_LINE_IN, 986 } }, 987 }, 988 [EM2861_BOARD_GADMEI_UTV330PLUS] = { 989 .name = "Gadmei UTV330+", 990 .tuner_type = TUNER_TNF_5335MF, 991 .tda9887_conf = TDA9887_PRESENT, 992 .ir_codes = RC_MAP_GADMEI_RM008Z, 993 .decoder = EM28XX_SAA711X, 994 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 995 .input = { { 996 .type = EM28XX_VMUX_TELEVISION, 997 .vmux = SAA7115_COMPOSITE2, 998 .amux = EM28XX_AMUX_VIDEO, 999 }, { 1000 .type = EM28XX_VMUX_COMPOSITE, 1001 .vmux = SAA7115_COMPOSITE0, 1002 .amux = EM28XX_AMUX_LINE_IN, 1003 }, { 1004 .type = EM28XX_VMUX_SVIDEO, 1005 .vmux = SAA7115_SVIDEO3, 1006 .amux = EM28XX_AMUX_LINE_IN, 1007 } }, 1008 }, 1009 [EM2860_BOARD_TERRATEC_HYBRID_XS] = { 1010 .name = "Terratec Cinergy A Hybrid XS", 1011 .valid = EM28XX_BOARD_NOT_VALIDATED, 1012 .tuner_type = TUNER_XC2028, 1013 .tuner_gpio = default_tuner_gpio, 1014 .decoder = EM28XX_TVP5150, 1015 1016 .input = { { 1017 .type = EM28XX_VMUX_TELEVISION, 1018 .vmux = TVP5150_COMPOSITE0, 1019 .amux = EM28XX_AMUX_VIDEO, 1020 .gpio = hauppauge_wintv_hvr_900_analog, 1021 }, { 1022 .type = EM28XX_VMUX_COMPOSITE, 1023 .vmux = TVP5150_COMPOSITE1, 1024 .amux = EM28XX_AMUX_LINE_IN, 1025 .gpio = hauppauge_wintv_hvr_900_analog, 1026 }, { 1027 .type = EM28XX_VMUX_SVIDEO, 1028 .vmux = TVP5150_SVIDEO, 1029 .amux = EM28XX_AMUX_LINE_IN, 1030 .gpio = hauppauge_wintv_hvr_900_analog, 1031 } }, 1032 }, 1033 [EM2861_BOARD_KWORLD_PVRTV_300U] = { 1034 .name = "KWorld PVRTV 300U", 1035 .valid = EM28XX_BOARD_NOT_VALIDATED, 1036 .tuner_type = TUNER_XC2028, 1037 .tuner_gpio = default_tuner_gpio, 1038 .decoder = EM28XX_TVP5150, 1039 .input = { { 1040 .type = EM28XX_VMUX_TELEVISION, 1041 .vmux = TVP5150_COMPOSITE0, 1042 .amux = EM28XX_AMUX_VIDEO, 1043 }, { 1044 .type = EM28XX_VMUX_COMPOSITE, 1045 .vmux = TVP5150_COMPOSITE1, 1046 .amux = EM28XX_AMUX_LINE_IN, 1047 }, { 1048 .type = EM28XX_VMUX_SVIDEO, 1049 .vmux = TVP5150_SVIDEO, 1050 .amux = EM28XX_AMUX_LINE_IN, 1051 } }, 1052 }, 1053 [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = { 1054 .name = "Yakumo MovieMixer", 1055 .tuner_type = TUNER_ABSENT, /* Capture only device */ 1056 .decoder = EM28XX_TVP5150, 1057 .input = { { 1058 .type = EM28XX_VMUX_TELEVISION, 1059 .vmux = TVP5150_COMPOSITE0, 1060 .amux = EM28XX_AMUX_VIDEO, 1061 }, { 1062 .type = EM28XX_VMUX_COMPOSITE, 1063 .vmux = TVP5150_COMPOSITE1, 1064 .amux = EM28XX_AMUX_LINE_IN, 1065 }, { 1066 .type = EM28XX_VMUX_SVIDEO, 1067 .vmux = TVP5150_SVIDEO, 1068 .amux = EM28XX_AMUX_LINE_IN, 1069 } }, 1070 }, 1071 [EM2860_BOARD_TVP5150_REFERENCE_DESIGN] = { 1072 .name = "EM2860/TVP5150 Reference Design", 1073 .tuner_type = TUNER_ABSENT, /* Capture only device */ 1074 .decoder = EM28XX_TVP5150, 1075 .input = { { 1076 .type = EM28XX_VMUX_COMPOSITE, 1077 .vmux = TVP5150_COMPOSITE1, 1078 .amux = EM28XX_AMUX_LINE_IN, 1079 }, { 1080 .type = EM28XX_VMUX_SVIDEO, 1081 .vmux = TVP5150_SVIDEO, 1082 .amux = EM28XX_AMUX_LINE_IN, 1083 } }, 1084 }, 1085 [EM2861_BOARD_PLEXTOR_PX_TV100U] = { 1086 .name = "Plextor ConvertX PX-TV100U", 1087 .tuner_type = TUNER_TNF_5335MF, 1088 .xclk = EM28XX_XCLK_I2S_MSB_TIMING | 1089 EM28XX_XCLK_FREQUENCY_12MHZ, 1090 .tda9887_conf = TDA9887_PRESENT, 1091 .decoder = EM28XX_TVP5150, 1092 .has_msp34xx = 1, 1093 .input = { { 1094 .type = EM28XX_VMUX_TELEVISION, 1095 .vmux = TVP5150_COMPOSITE0, 1096 .amux = EM28XX_AMUX_LINE_IN, 1097 .gpio = pinnacle_hybrid_pro_analog, 1098 }, { 1099 .type = EM28XX_VMUX_COMPOSITE, 1100 .vmux = TVP5150_COMPOSITE1, 1101 .amux = EM28XX_AMUX_LINE_IN, 1102 .gpio = pinnacle_hybrid_pro_analog, 1103 }, { 1104 .type = EM28XX_VMUX_SVIDEO, 1105 .vmux = TVP5150_SVIDEO, 1106 .amux = EM28XX_AMUX_LINE_IN, 1107 .gpio = pinnacle_hybrid_pro_analog, 1108 } }, 1109 }, 1110 1111 /* Those boards with em2870 are DVB Only*/ 1112 1113 [EM2870_BOARD_TERRATEC_XS] = { 1114 .name = "Terratec Cinergy T XS", 1115 .valid = EM28XX_BOARD_NOT_VALIDATED, 1116 .tuner_type = TUNER_XC2028, 1117 .tuner_gpio = default_tuner_gpio, 1118 }, 1119 [EM2870_BOARD_TERRATEC_XS_MT2060] = { 1120 .name = "Terratec Cinergy T XS (MT2060)", 1121 .xclk = EM28XX_XCLK_IR_RC5_MODE | 1122 EM28XX_XCLK_FREQUENCY_12MHZ, 1123 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 1124 .tuner_type = TUNER_ABSENT, /* MT2060 */ 1125 .has_dvb = 1, 1126 .tuner_gpio = default_tuner_gpio, 1127 }, 1128 [EM2870_BOARD_KWORLD_350U] = { 1129 .name = "Kworld 350 U DVB-T", 1130 .valid = EM28XX_BOARD_NOT_VALIDATED, 1131 .tuner_type = TUNER_XC2028, 1132 .tuner_gpio = default_tuner_gpio, 1133 }, 1134 [EM2870_BOARD_KWORLD_355U] = { 1135 .name = "Kworld 355 U DVB-T", 1136 .valid = EM28XX_BOARD_NOT_VALIDATED, 1137 .tuner_type = TUNER_ABSENT, 1138 .tuner_gpio = default_tuner_gpio, 1139 .has_dvb = 1, 1140 .dvb_gpio = default_digital, 1141 }, 1142 [EM2870_BOARD_PINNACLE_PCTV_DVB] = { 1143 .name = "Pinnacle PCTV DVB-T", 1144 .valid = EM28XX_BOARD_NOT_VALIDATED, 1145 .tuner_type = TUNER_ABSENT, /* MT2060 */ 1146 /* djh - I have serious doubts this is right... */ 1147 .xclk = EM28XX_XCLK_IR_RC5_MODE | 1148 EM28XX_XCLK_FREQUENCY_10MHZ, 1149 }, 1150 [EM2870_BOARD_COMPRO_VIDEOMATE] = { 1151 .name = "Compro, VideoMate U3", 1152 .valid = EM28XX_BOARD_NOT_VALIDATED, 1153 .tuner_type = TUNER_ABSENT, /* MT2060 */ 1154 }, 1155 1156 [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = { 1157 .name = "Terratec Hybrid XS Secam", 1158 .has_msp34xx = 1, 1159 .tuner_type = TUNER_XC2028, 1160 .tuner_gpio = default_tuner_gpio, 1161 .decoder = EM28XX_TVP5150, 1162 .has_dvb = 1, 1163 .dvb_gpio = terratec_cinergy_USB_XS_FR_digital, 1164 .input = { { 1165 .type = EM28XX_VMUX_TELEVISION, 1166 .vmux = TVP5150_COMPOSITE0, 1167 .amux = EM28XX_AMUX_VIDEO, 1168 .gpio = terratec_cinergy_USB_XS_FR_analog, 1169 }, { 1170 .type = EM28XX_VMUX_COMPOSITE, 1171 .vmux = TVP5150_COMPOSITE1, 1172 .amux = EM28XX_AMUX_LINE_IN, 1173 .gpio = terratec_cinergy_USB_XS_FR_analog, 1174 }, { 1175 .type = EM28XX_VMUX_SVIDEO, 1176 .vmux = TVP5150_SVIDEO, 1177 .amux = EM28XX_AMUX_LINE_IN, 1178 .gpio = terratec_cinergy_USB_XS_FR_analog, 1179 } }, 1180 }, 1181 [EM2884_BOARD_TERRATEC_H5] = { 1182 .name = "Terratec Cinergy H5", 1183 .has_dvb = 1, 1184 #if 0 1185 .tuner_type = TUNER_PHILIPS_TDA8290, 1186 .tuner_addr = 0x41, 1187 .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */ 1188 .tuner_gpio = terratec_h5_gpio, 1189 #else 1190 .tuner_type = TUNER_ABSENT, 1191 #endif 1192 .def_i2c_bus = 1, 1193 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1194 EM28XX_I2C_FREQ_400_KHZ, 1195 }, 1196 [EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = { 1197 .name = "Hauppauge WinTV HVR 930C", 1198 .has_dvb = 1, 1199 #if 0 /* FIXME: Add analog support */ 1200 .tuner_type = TUNER_XC5000, 1201 .tuner_addr = 0x41, 1202 .dvb_gpio = hauppauge_930c_digital, 1203 .tuner_gpio = hauppauge_930c_gpio, 1204 #else 1205 .tuner_type = TUNER_ABSENT, 1206 #endif 1207 .ir_codes = RC_MAP_HAUPPAUGE, 1208 .def_i2c_bus = 1, 1209 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1210 EM28XX_I2C_FREQ_400_KHZ, 1211 }, 1212 [EM2884_BOARD_C3TECH_DIGITAL_DUO] = { 1213 .name = "C3 Tech Digital Duo HDTV/SDTV USB", 1214 .has_dvb = 1, 1215 /* FIXME: Add analog support - need a saa7136 driver */ 1216 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */ 1217 .ir_codes = RC_MAP_EMPTY, 1218 .def_i2c_bus = 1, 1219 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 1220 .dvb_gpio = c3tech_digital_duo_digital, 1221 }, 1222 [EM2884_BOARD_CINERGY_HTC_STICK] = { 1223 .name = "Terratec Cinergy HTC Stick", 1224 .has_dvb = 1, 1225 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, 1226 .tuner_type = TUNER_ABSENT, 1227 .def_i2c_bus = 1, 1228 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1229 EM28XX_I2C_FREQ_400_KHZ, 1230 }, 1231 [EM2884_BOARD_ELGATO_EYETV_HYBRID_2008] = { 1232 .name = "Elgato EyeTV Hybrid 2008 INT", 1233 .has_dvb = 1, 1234 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, 1235 .tuner_type = TUNER_ABSENT, 1236 .def_i2c_bus = 1, 1237 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1238 EM28XX_I2C_FREQ_400_KHZ, 1239 }, 1240 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = { 1241 .name = "Hauppauge WinTV HVR 900", 1242 .tda9887_conf = TDA9887_PRESENT, 1243 .tuner_type = TUNER_XC2028, 1244 .tuner_gpio = default_tuner_gpio, 1245 .mts_firmware = 1, 1246 .has_dvb = 1, 1247 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1248 .ir_codes = RC_MAP_HAUPPAUGE, 1249 .decoder = EM28XX_TVP5150, 1250 .input = { { 1251 .type = EM28XX_VMUX_TELEVISION, 1252 .vmux = TVP5150_COMPOSITE0, 1253 .amux = EM28XX_AMUX_VIDEO, 1254 .gpio = hauppauge_wintv_hvr_900_analog, 1255 }, { 1256 .type = EM28XX_VMUX_COMPOSITE, 1257 .vmux = TVP5150_COMPOSITE1, 1258 .amux = EM28XX_AMUX_LINE_IN, 1259 .gpio = hauppauge_wintv_hvr_900_analog, 1260 }, { 1261 .type = EM28XX_VMUX_SVIDEO, 1262 .vmux = TVP5150_SVIDEO, 1263 .amux = EM28XX_AMUX_LINE_IN, 1264 .gpio = hauppauge_wintv_hvr_900_analog, 1265 } }, 1266 }, 1267 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = { 1268 .name = "Hauppauge WinTV HVR 900 (R2)", 1269 .tda9887_conf = TDA9887_PRESENT, 1270 .tuner_type = TUNER_XC2028, 1271 .tuner_gpio = default_tuner_gpio, 1272 .mts_firmware = 1, 1273 .has_dvb = 1, 1274 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, 1275 .ir_codes = RC_MAP_HAUPPAUGE, 1276 .decoder = EM28XX_TVP5150, 1277 .input = { { 1278 .type = EM28XX_VMUX_TELEVISION, 1279 .vmux = TVP5150_COMPOSITE0, 1280 .amux = EM28XX_AMUX_VIDEO, 1281 .gpio = hauppauge_wintv_hvr_900_analog, 1282 }, { 1283 .type = EM28XX_VMUX_COMPOSITE, 1284 .vmux = TVP5150_COMPOSITE1, 1285 .amux = EM28XX_AMUX_LINE_IN, 1286 .gpio = hauppauge_wintv_hvr_900_analog, 1287 }, { 1288 .type = EM28XX_VMUX_SVIDEO, 1289 .vmux = TVP5150_SVIDEO, 1290 .amux = EM28XX_AMUX_LINE_IN, 1291 .gpio = hauppauge_wintv_hvr_900_analog, 1292 } }, 1293 }, 1294 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = { 1295 .name = "Hauppauge WinTV HVR 850", 1296 .tuner_type = TUNER_XC2028, 1297 .tuner_gpio = default_tuner_gpio, 1298 .mts_firmware = 1, 1299 .has_dvb = 1, 1300 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1301 .ir_codes = RC_MAP_HAUPPAUGE, 1302 .decoder = EM28XX_TVP5150, 1303 .input = { { 1304 .type = EM28XX_VMUX_TELEVISION, 1305 .vmux = TVP5150_COMPOSITE0, 1306 .amux = EM28XX_AMUX_VIDEO, 1307 .gpio = hauppauge_wintv_hvr_900_analog, 1308 }, { 1309 .type = EM28XX_VMUX_COMPOSITE, 1310 .vmux = TVP5150_COMPOSITE1, 1311 .amux = EM28XX_AMUX_LINE_IN, 1312 .gpio = hauppauge_wintv_hvr_900_analog, 1313 }, { 1314 .type = EM28XX_VMUX_SVIDEO, 1315 .vmux = TVP5150_SVIDEO, 1316 .amux = EM28XX_AMUX_LINE_IN, 1317 .gpio = hauppauge_wintv_hvr_900_analog, 1318 } }, 1319 }, 1320 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = { 1321 .name = "Hauppauge WinTV HVR 950", 1322 .tuner_type = TUNER_XC2028, 1323 .tuner_gpio = default_tuner_gpio, 1324 .mts_firmware = 1, 1325 .has_dvb = 1, 1326 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1327 .ir_codes = RC_MAP_HAUPPAUGE, 1328 .decoder = EM28XX_TVP5150, 1329 .input = { { 1330 .type = EM28XX_VMUX_TELEVISION, 1331 .vmux = TVP5150_COMPOSITE0, 1332 .amux = EM28XX_AMUX_VIDEO, 1333 .gpio = hauppauge_wintv_hvr_900_analog, 1334 }, { 1335 .type = EM28XX_VMUX_COMPOSITE, 1336 .vmux = TVP5150_COMPOSITE1, 1337 .amux = EM28XX_AMUX_LINE_IN, 1338 .gpio = hauppauge_wintv_hvr_900_analog, 1339 }, { 1340 .type = EM28XX_VMUX_SVIDEO, 1341 .vmux = TVP5150_SVIDEO, 1342 .amux = EM28XX_AMUX_LINE_IN, 1343 .gpio = hauppauge_wintv_hvr_900_analog, 1344 } }, 1345 }, 1346 [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = { 1347 .name = "Pinnacle PCTV HD Pro Stick", 1348 .tuner_type = TUNER_XC2028, 1349 .tuner_gpio = default_tuner_gpio, 1350 .mts_firmware = 1, 1351 .has_dvb = 1, 1352 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1353 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 1354 .decoder = EM28XX_TVP5150, 1355 .input = { { 1356 .type = EM28XX_VMUX_TELEVISION, 1357 .vmux = TVP5150_COMPOSITE0, 1358 .amux = EM28XX_AMUX_VIDEO, 1359 .gpio = hauppauge_wintv_hvr_900_analog, 1360 }, { 1361 .type = EM28XX_VMUX_COMPOSITE, 1362 .vmux = TVP5150_COMPOSITE1, 1363 .amux = EM28XX_AMUX_LINE_IN, 1364 .gpio = hauppauge_wintv_hvr_900_analog, 1365 }, { 1366 .type = EM28XX_VMUX_SVIDEO, 1367 .vmux = TVP5150_SVIDEO, 1368 .amux = EM28XX_AMUX_LINE_IN, 1369 .gpio = hauppauge_wintv_hvr_900_analog, 1370 } }, 1371 }, 1372 [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = { 1373 .name = "AMD ATI TV Wonder HD 600", 1374 .tuner_type = TUNER_XC2028, 1375 .tuner_gpio = default_tuner_gpio, 1376 .mts_firmware = 1, 1377 .has_dvb = 1, 1378 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1379 .ir_codes = RC_MAP_ATI_TV_WONDER_HD_600, 1380 .decoder = EM28XX_TVP5150, 1381 .input = { { 1382 .type = EM28XX_VMUX_TELEVISION, 1383 .vmux = TVP5150_COMPOSITE0, 1384 .amux = EM28XX_AMUX_VIDEO, 1385 .gpio = hauppauge_wintv_hvr_900_analog, 1386 }, { 1387 .type = EM28XX_VMUX_COMPOSITE, 1388 .vmux = TVP5150_COMPOSITE1, 1389 .amux = EM28XX_AMUX_LINE_IN, 1390 .gpio = hauppauge_wintv_hvr_900_analog, 1391 }, { 1392 .type = EM28XX_VMUX_SVIDEO, 1393 .vmux = TVP5150_SVIDEO, 1394 .amux = EM28XX_AMUX_LINE_IN, 1395 .gpio = hauppauge_wintv_hvr_900_analog, 1396 } }, 1397 }, 1398 [EM2880_BOARD_TERRATEC_HYBRID_XS] = { 1399 .name = "Terratec Hybrid XS", 1400 .tuner_type = TUNER_XC2028, 1401 .tuner_gpio = default_tuner_gpio, 1402 .decoder = EM28XX_TVP5150, 1403 .has_dvb = 1, 1404 .dvb_gpio = default_digital, 1405 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS, 1406 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 1407 .input = { { 1408 .type = EM28XX_VMUX_TELEVISION, 1409 .vmux = TVP5150_COMPOSITE0, 1410 .amux = EM28XX_AMUX_VIDEO, 1411 .gpio = default_analog, 1412 }, { 1413 .type = EM28XX_VMUX_COMPOSITE, 1414 .vmux = TVP5150_COMPOSITE1, 1415 .amux = EM28XX_AMUX_LINE_IN, 1416 .gpio = default_analog, 1417 }, { 1418 .type = EM28XX_VMUX_SVIDEO, 1419 .vmux = TVP5150_SVIDEO, 1420 .amux = EM28XX_AMUX_LINE_IN, 1421 .gpio = default_analog, 1422 } }, 1423 }, 1424 /* maybe there's a reason behind it why Terratec sells the Hybrid XS 1425 as Prodigy XS with a different PID, let's keep it separated for now 1426 maybe we'll need it lateron */ 1427 [EM2880_BOARD_TERRATEC_PRODIGY_XS] = { 1428 .name = "Terratec Prodigy XS", 1429 .tuner_type = TUNER_XC2028, 1430 .tuner_gpio = default_tuner_gpio, 1431 .decoder = EM28XX_TVP5150, 1432 .input = { { 1433 .type = EM28XX_VMUX_TELEVISION, 1434 .vmux = TVP5150_COMPOSITE0, 1435 .amux = EM28XX_AMUX_VIDEO, 1436 .gpio = hauppauge_wintv_hvr_900_analog, 1437 }, { 1438 .type = EM28XX_VMUX_COMPOSITE, 1439 .vmux = TVP5150_COMPOSITE1, 1440 .amux = EM28XX_AMUX_LINE_IN, 1441 .gpio = hauppauge_wintv_hvr_900_analog, 1442 }, { 1443 .type = EM28XX_VMUX_SVIDEO, 1444 .vmux = TVP5150_SVIDEO, 1445 .amux = EM28XX_AMUX_LINE_IN, 1446 .gpio = hauppauge_wintv_hvr_900_analog, 1447 } }, 1448 }, 1449 [EM2820_BOARD_MSI_VOX_USB_2] = { 1450 .name = "MSI VOX USB 2.0", 1451 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1452 .tda9887_conf = TDA9887_PRESENT | 1453 TDA9887_PORT1_ACTIVE | 1454 TDA9887_PORT2_ACTIVE, 1455 .max_range_640_480 = 1, 1456 .decoder = EM28XX_SAA711X, 1457 .input = { { 1458 .type = EM28XX_VMUX_TELEVISION, 1459 .vmux = SAA7115_COMPOSITE4, 1460 .amux = EM28XX_AMUX_VIDEO, 1461 }, { 1462 .type = EM28XX_VMUX_COMPOSITE, 1463 .vmux = SAA7115_COMPOSITE0, 1464 .amux = EM28XX_AMUX_LINE_IN, 1465 }, { 1466 .type = EM28XX_VMUX_SVIDEO, 1467 .vmux = SAA7115_SVIDEO3, 1468 .amux = EM28XX_AMUX_LINE_IN, 1469 } }, 1470 }, 1471 [EM2800_BOARD_TERRATEC_CINERGY_200] = { 1472 .name = "Terratec Cinergy 200 USB", 1473 .is_em2800 = 1, 1474 .has_ir_i2c = 1, 1475 .tuner_type = TUNER_LG_TALN, 1476 .tda9887_conf = TDA9887_PRESENT, 1477 .decoder = EM28XX_SAA711X, 1478 .input = { { 1479 .type = EM28XX_VMUX_TELEVISION, 1480 .vmux = SAA7115_COMPOSITE2, 1481 .amux = EM28XX_AMUX_VIDEO, 1482 }, { 1483 .type = EM28XX_VMUX_COMPOSITE, 1484 .vmux = SAA7115_COMPOSITE0, 1485 .amux = EM28XX_AMUX_LINE_IN, 1486 }, { 1487 .type = EM28XX_VMUX_SVIDEO, 1488 .vmux = SAA7115_SVIDEO3, 1489 .amux = EM28XX_AMUX_LINE_IN, 1490 } }, 1491 }, 1492 [EM2800_BOARD_GRABBEEX_USB2800] = { 1493 .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder", 1494 .is_em2800 = 1, 1495 .decoder = EM28XX_SAA711X, 1496 .tuner_type = TUNER_ABSENT, /* capture only board */ 1497 .input = { { 1498 .type = EM28XX_VMUX_COMPOSITE, 1499 .vmux = SAA7115_COMPOSITE0, 1500 .amux = EM28XX_AMUX_LINE_IN, 1501 }, { 1502 .type = EM28XX_VMUX_SVIDEO, 1503 .vmux = SAA7115_SVIDEO3, 1504 .amux = EM28XX_AMUX_LINE_IN, 1505 } }, 1506 }, 1507 [EM2800_BOARD_VC211A] = { 1508 .name = "Actionmaster/LinXcel/Digitus VC211A", 1509 .is_em2800 = 1, 1510 .tuner_type = TUNER_ABSENT, /* Capture-only board */ 1511 .decoder = EM28XX_SAA711X, 1512 .input = { { 1513 .type = EM28XX_VMUX_COMPOSITE, 1514 .vmux = SAA7115_COMPOSITE0, 1515 .amux = EM28XX_AMUX_LINE_IN, 1516 .gpio = vc211a_enable, 1517 }, { 1518 .type = EM28XX_VMUX_SVIDEO, 1519 .vmux = SAA7115_SVIDEO3, 1520 .amux = EM28XX_AMUX_LINE_IN, 1521 .gpio = vc211a_enable, 1522 } }, 1523 }, 1524 [EM2800_BOARD_LEADTEK_WINFAST_USBII] = { 1525 .name = "Leadtek Winfast USB II", 1526 .is_em2800 = 1, 1527 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1528 .tda9887_conf = TDA9887_PRESENT, 1529 .decoder = EM28XX_SAA711X, 1530 .input = { { 1531 .type = EM28XX_VMUX_TELEVISION, 1532 .vmux = SAA7115_COMPOSITE2, 1533 .amux = EM28XX_AMUX_VIDEO, 1534 }, { 1535 .type = EM28XX_VMUX_COMPOSITE, 1536 .vmux = SAA7115_COMPOSITE0, 1537 .amux = EM28XX_AMUX_LINE_IN, 1538 }, { 1539 .type = EM28XX_VMUX_SVIDEO, 1540 .vmux = SAA7115_SVIDEO3, 1541 .amux = EM28XX_AMUX_LINE_IN, 1542 } }, 1543 }, 1544 [EM2800_BOARD_KWORLD_USB2800] = { 1545 .name = "Kworld USB2800", 1546 .is_em2800 = 1, 1547 .tuner_type = TUNER_PHILIPS_FCV1236D, 1548 .tda9887_conf = TDA9887_PRESENT, 1549 .decoder = EM28XX_SAA711X, 1550 .input = { { 1551 .type = EM28XX_VMUX_TELEVISION, 1552 .vmux = SAA7115_COMPOSITE2, 1553 .amux = EM28XX_AMUX_VIDEO, 1554 }, { 1555 .type = EM28XX_VMUX_COMPOSITE, 1556 .vmux = SAA7115_COMPOSITE0, 1557 .amux = EM28XX_AMUX_LINE_IN, 1558 }, { 1559 .type = EM28XX_VMUX_SVIDEO, 1560 .vmux = SAA7115_SVIDEO3, 1561 .amux = EM28XX_AMUX_LINE_IN, 1562 } }, 1563 }, 1564 [EM2820_BOARD_PINNACLE_DVC_90] = { 1565 .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U", 1566 .tuner_type = TUNER_ABSENT, /* capture only board */ 1567 .decoder = EM28XX_SAA711X, 1568 .input = { { 1569 .type = EM28XX_VMUX_COMPOSITE, 1570 .vmux = SAA7115_COMPOSITE0, 1571 .amux = EM28XX_AMUX_LINE_IN, 1572 }, { 1573 .type = EM28XX_VMUX_SVIDEO, 1574 .vmux = SAA7115_SVIDEO3, 1575 .amux = EM28XX_AMUX_LINE_IN, 1576 } }, 1577 }, 1578 [EM2800_BOARD_VGEAR_POCKETTV] = { 1579 .name = "V-Gear PocketTV", 1580 .is_em2800 = 1, 1581 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1582 .tda9887_conf = TDA9887_PRESENT, 1583 .decoder = EM28XX_SAA711X, 1584 .input = { { 1585 .type = EM28XX_VMUX_TELEVISION, 1586 .vmux = SAA7115_COMPOSITE2, 1587 .amux = EM28XX_AMUX_VIDEO, 1588 }, { 1589 .type = EM28XX_VMUX_COMPOSITE, 1590 .vmux = SAA7115_COMPOSITE0, 1591 .amux = EM28XX_AMUX_LINE_IN, 1592 }, { 1593 .type = EM28XX_VMUX_SVIDEO, 1594 .vmux = SAA7115_SVIDEO3, 1595 .amux = EM28XX_AMUX_LINE_IN, 1596 } }, 1597 }, 1598 [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = { 1599 .name = "Pixelview PlayTV Box 4 USB 2.0", 1600 .tda9887_conf = TDA9887_PRESENT, 1601 .tuner_type = TUNER_YMEC_TVF_5533MF, 1602 .decoder = EM28XX_SAA711X, 1603 .input = { { 1604 .type = EM28XX_VMUX_TELEVISION, 1605 .vmux = SAA7115_COMPOSITE2, 1606 .amux = EM28XX_AMUX_VIDEO, 1607 .aout = EM28XX_AOUT_MONO | /* I2S */ 1608 EM28XX_AOUT_MASTER, /* Line out pin */ 1609 }, { 1610 .type = EM28XX_VMUX_COMPOSITE, 1611 .vmux = SAA7115_COMPOSITE0, 1612 .amux = EM28XX_AMUX_LINE_IN, 1613 }, { 1614 .type = EM28XX_VMUX_SVIDEO, 1615 .vmux = SAA7115_SVIDEO3, 1616 .amux = EM28XX_AMUX_LINE_IN, 1617 } }, 1618 }, 1619 [EM2820_BOARD_PROLINK_PLAYTV_USB2] = { 1620 .name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0", 1621 .buttons = std_snapshot_button, 1622 .tda9887_conf = TDA9887_PRESENT, 1623 .tuner_type = TUNER_YMEC_TVF_5533MF, 1624 .tuner_addr = 0x60, 1625 .decoder = EM28XX_SAA711X, 1626 .input = { { 1627 .type = EM28XX_VMUX_TELEVISION, 1628 .vmux = SAA7115_COMPOSITE2, 1629 .amux = EM28XX_AMUX_VIDEO, 1630 .aout = EM28XX_AOUT_MONO | /* I2S */ 1631 EM28XX_AOUT_MASTER, /* Line out pin */ 1632 }, { 1633 .type = EM28XX_VMUX_COMPOSITE, 1634 .vmux = SAA7115_COMPOSITE0, 1635 .amux = EM28XX_AMUX_LINE_IN, 1636 }, { 1637 .type = EM28XX_VMUX_SVIDEO, 1638 .vmux = SAA7115_SVIDEO3, 1639 .amux = EM28XX_AMUX_LINE_IN, 1640 } }, 1641 }, 1642 [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = { 1643 .name = "EM2860/SAA711X Reference Design", 1644 .buttons = std_snapshot_button, 1645 .tuner_type = TUNER_ABSENT, 1646 .decoder = EM28XX_SAA711X, 1647 .input = { { 1648 .type = EM28XX_VMUX_SVIDEO, 1649 .vmux = SAA7115_SVIDEO3, 1650 }, { 1651 .type = EM28XX_VMUX_COMPOSITE, 1652 .vmux = SAA7115_COMPOSITE0, 1653 } }, 1654 }, 1655 1656 [EM2874_BOARD_LEADERSHIP_ISDBT] = { 1657 .def_i2c_bus = 1, 1658 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1659 EM28XX_I2C_FREQ_100_KHZ, 1660 .xclk = EM28XX_XCLK_FREQUENCY_10MHZ, 1661 .name = "EM2874 Leadership ISDBT", 1662 .tuner_type = TUNER_ABSENT, 1663 .tuner_gpio = leadership_reset, 1664 .dvb_gpio = leadership_digital, 1665 .has_dvb = 1, 1666 }, 1667 1668 [EM2880_BOARD_MSI_DIGIVOX_AD] = { 1669 .name = "MSI DigiVox A/D", 1670 .valid = EM28XX_BOARD_NOT_VALIDATED, 1671 .tuner_type = TUNER_XC2028, 1672 .tuner_gpio = default_tuner_gpio, 1673 .decoder = EM28XX_TVP5150, 1674 .input = { { 1675 .type = EM28XX_VMUX_TELEVISION, 1676 .vmux = TVP5150_COMPOSITE0, 1677 .amux = EM28XX_AMUX_VIDEO, 1678 .gpio = em2880_msi_digivox_ad_analog, 1679 }, { 1680 .type = EM28XX_VMUX_COMPOSITE, 1681 .vmux = TVP5150_COMPOSITE1, 1682 .amux = EM28XX_AMUX_LINE_IN, 1683 .gpio = em2880_msi_digivox_ad_analog, 1684 }, { 1685 .type = EM28XX_VMUX_SVIDEO, 1686 .vmux = TVP5150_SVIDEO, 1687 .amux = EM28XX_AMUX_LINE_IN, 1688 .gpio = em2880_msi_digivox_ad_analog, 1689 } }, 1690 }, 1691 [EM2880_BOARD_MSI_DIGIVOX_AD_II] = { 1692 .name = "MSI DigiVox A/D II", 1693 .valid = EM28XX_BOARD_NOT_VALIDATED, 1694 .tuner_type = TUNER_XC2028, 1695 .tuner_gpio = default_tuner_gpio, 1696 .decoder = EM28XX_TVP5150, 1697 .input = { { 1698 .type = EM28XX_VMUX_TELEVISION, 1699 .vmux = TVP5150_COMPOSITE0, 1700 .amux = EM28XX_AMUX_VIDEO, 1701 .gpio = em2880_msi_digivox_ad_analog, 1702 }, { 1703 .type = EM28XX_VMUX_COMPOSITE, 1704 .vmux = TVP5150_COMPOSITE1, 1705 .amux = EM28XX_AMUX_LINE_IN, 1706 .gpio = em2880_msi_digivox_ad_analog, 1707 }, { 1708 .type = EM28XX_VMUX_SVIDEO, 1709 .vmux = TVP5150_SVIDEO, 1710 .amux = EM28XX_AMUX_LINE_IN, 1711 .gpio = em2880_msi_digivox_ad_analog, 1712 } }, 1713 }, 1714 [EM2880_BOARD_KWORLD_DVB_305U] = { 1715 .name = "KWorld DVB-T 305U", 1716 .tuner_type = TUNER_XC2028, 1717 .tuner_gpio = default_tuner_gpio, 1718 .decoder = EM28XX_TVP5150, 1719 .input = { { 1720 .type = EM28XX_VMUX_TELEVISION, 1721 .vmux = TVP5150_COMPOSITE0, 1722 .amux = EM28XX_AMUX_VIDEO, 1723 }, { 1724 .type = EM28XX_VMUX_COMPOSITE, 1725 .vmux = TVP5150_COMPOSITE1, 1726 .amux = EM28XX_AMUX_LINE_IN, 1727 }, { 1728 .type = EM28XX_VMUX_SVIDEO, 1729 .vmux = TVP5150_SVIDEO, 1730 .amux = EM28XX_AMUX_LINE_IN, 1731 } }, 1732 }, 1733 [EM2880_BOARD_KWORLD_DVB_310U] = { 1734 .name = "KWorld DVB-T 310U", 1735 .tuner_type = TUNER_XC2028, 1736 .tuner_gpio = default_tuner_gpio, 1737 .has_dvb = 1, 1738 .dvb_gpio = default_digital, 1739 .mts_firmware = 1, 1740 .decoder = EM28XX_TVP5150, 1741 .input = { { 1742 .type = EM28XX_VMUX_TELEVISION, 1743 .vmux = TVP5150_COMPOSITE0, 1744 .amux = EM28XX_AMUX_VIDEO, 1745 .gpio = default_analog, 1746 }, { 1747 .type = EM28XX_VMUX_COMPOSITE, 1748 .vmux = TVP5150_COMPOSITE1, 1749 .amux = EM28XX_AMUX_LINE_IN, 1750 .gpio = default_analog, 1751 }, { /* S-video has not been tested yet */ 1752 .type = EM28XX_VMUX_SVIDEO, 1753 .vmux = TVP5150_SVIDEO, 1754 .amux = EM28XX_AMUX_LINE_IN, 1755 .gpio = default_analog, 1756 } }, 1757 }, 1758 [EM2882_BOARD_KWORLD_ATSC_315U] = { 1759 .name = "KWorld ATSC 315U HDTV TV Box", 1760 .valid = EM28XX_BOARD_NOT_VALIDATED, 1761 .tuner_type = TUNER_THOMSON_DTT761X, 1762 .tuner_gpio = em2882_kworld_315u_tuner_gpio, 1763 .tda9887_conf = TDA9887_PRESENT, 1764 .decoder = EM28XX_SAA711X, 1765 .has_dvb = 1, 1766 .dvb_gpio = em2882_kworld_315u_digital, 1767 .ir_codes = RC_MAP_KWORLD_315U, 1768 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1769 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 1770 /* Analog mode - still not ready */ 1771 /*.input = { { 1772 .type = EM28XX_VMUX_TELEVISION, 1773 .vmux = SAA7115_COMPOSITE2, 1774 .amux = EM28XX_AMUX_VIDEO, 1775 .gpio = em2882_kworld_315u_analog, 1776 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1777 }, { 1778 .type = EM28XX_VMUX_COMPOSITE, 1779 .vmux = SAA7115_COMPOSITE0, 1780 .amux = EM28XX_AMUX_LINE_IN, 1781 .gpio = em2882_kworld_315u_analog1, 1782 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1783 }, { 1784 .type = EM28XX_VMUX_SVIDEO, 1785 .vmux = SAA7115_SVIDEO3, 1786 .amux = EM28XX_AMUX_LINE_IN, 1787 .gpio = em2882_kworld_315u_analog1, 1788 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1789 } }, */ 1790 }, 1791 [EM2880_BOARD_EMPIRE_DUAL_TV] = { 1792 .name = "Empire dual TV", 1793 .tuner_type = TUNER_XC2028, 1794 .tuner_gpio = default_tuner_gpio, 1795 .has_dvb = 1, 1796 .dvb_gpio = default_digital, 1797 .mts_firmware = 1, 1798 .decoder = EM28XX_TVP5150, 1799 .input = { { 1800 .type = EM28XX_VMUX_TELEVISION, 1801 .vmux = TVP5150_COMPOSITE0, 1802 .amux = EM28XX_AMUX_VIDEO, 1803 .gpio = default_analog, 1804 }, { 1805 .type = EM28XX_VMUX_COMPOSITE, 1806 .vmux = TVP5150_COMPOSITE1, 1807 .amux = EM28XX_AMUX_LINE_IN, 1808 .gpio = default_analog, 1809 }, { 1810 .type = EM28XX_VMUX_SVIDEO, 1811 .vmux = TVP5150_SVIDEO, 1812 .amux = EM28XX_AMUX_LINE_IN, 1813 .gpio = default_analog, 1814 } }, 1815 }, 1816 [EM2881_BOARD_DNT_DA2_HYBRID] = { 1817 .name = "DNT DA2 Hybrid", 1818 .valid = EM28XX_BOARD_NOT_VALIDATED, 1819 .tuner_type = TUNER_XC2028, 1820 .tuner_gpio = default_tuner_gpio, 1821 .decoder = EM28XX_TVP5150, 1822 .input = { { 1823 .type = EM28XX_VMUX_TELEVISION, 1824 .vmux = TVP5150_COMPOSITE0, 1825 .amux = EM28XX_AMUX_VIDEO, 1826 .gpio = default_analog, 1827 }, { 1828 .type = EM28XX_VMUX_COMPOSITE, 1829 .vmux = TVP5150_COMPOSITE1, 1830 .amux = EM28XX_AMUX_LINE_IN, 1831 .gpio = default_analog, 1832 }, { 1833 .type = EM28XX_VMUX_SVIDEO, 1834 .vmux = TVP5150_SVIDEO, 1835 .amux = EM28XX_AMUX_LINE_IN, 1836 .gpio = default_analog, 1837 } }, 1838 }, 1839 [EM2881_BOARD_PINNACLE_HYBRID_PRO] = { 1840 .name = "Pinnacle Hybrid Pro", 1841 .tuner_type = TUNER_XC2028, 1842 .tuner_gpio = default_tuner_gpio, 1843 .decoder = EM28XX_TVP5150, 1844 .has_dvb = 1, 1845 .dvb_gpio = pinnacle_hybrid_pro_digital, 1846 .input = { { 1847 .type = EM28XX_VMUX_TELEVISION, 1848 .vmux = TVP5150_COMPOSITE0, 1849 .amux = EM28XX_AMUX_VIDEO, 1850 .gpio = pinnacle_hybrid_pro_analog, 1851 }, { 1852 .type = EM28XX_VMUX_COMPOSITE, 1853 .vmux = TVP5150_COMPOSITE1, 1854 .amux = EM28XX_AMUX_LINE_IN, 1855 .gpio = pinnacle_hybrid_pro_analog, 1856 }, { 1857 .type = EM28XX_VMUX_SVIDEO, 1858 .vmux = TVP5150_SVIDEO, 1859 .amux = EM28XX_AMUX_LINE_IN, 1860 .gpio = pinnacle_hybrid_pro_analog, 1861 } }, 1862 }, 1863 [EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = { 1864 .name = "Pinnacle Hybrid Pro (330e)", 1865 .tuner_type = TUNER_XC2028, 1866 .tuner_gpio = default_tuner_gpio, 1867 .mts_firmware = 1, 1868 .has_dvb = 1, 1869 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, 1870 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 1871 .decoder = EM28XX_TVP5150, 1872 .input = { { 1873 .type = EM28XX_VMUX_TELEVISION, 1874 .vmux = TVP5150_COMPOSITE0, 1875 .amux = EM28XX_AMUX_VIDEO, 1876 .gpio = hauppauge_wintv_hvr_900_analog, 1877 }, { 1878 .type = EM28XX_VMUX_COMPOSITE, 1879 .vmux = TVP5150_COMPOSITE1, 1880 .amux = EM28XX_AMUX_LINE_IN, 1881 .gpio = hauppauge_wintv_hvr_900_analog, 1882 }, { 1883 .type = EM28XX_VMUX_SVIDEO, 1884 .vmux = TVP5150_SVIDEO, 1885 .amux = EM28XX_AMUX_LINE_IN, 1886 .gpio = hauppauge_wintv_hvr_900_analog, 1887 } }, 1888 }, 1889 [EM2882_BOARD_KWORLD_VS_DVBT] = { 1890 .name = "Kworld VS-DVB-T 323UR", 1891 .tuner_type = TUNER_XC2028, 1892 .tuner_gpio = default_tuner_gpio, 1893 .decoder = EM28XX_TVP5150, 1894 .mts_firmware = 1, 1895 .has_dvb = 1, 1896 .dvb_gpio = kworld_330u_digital, 1897 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 1898 .ir_codes = RC_MAP_KWORLD_315U, 1899 .input = { { 1900 .type = EM28XX_VMUX_TELEVISION, 1901 .vmux = TVP5150_COMPOSITE0, 1902 .amux = EM28XX_AMUX_VIDEO, 1903 }, { 1904 .type = EM28XX_VMUX_COMPOSITE, 1905 .vmux = TVP5150_COMPOSITE1, 1906 .amux = EM28XX_AMUX_LINE_IN, 1907 }, { 1908 .type = EM28XX_VMUX_SVIDEO, 1909 .vmux = TVP5150_SVIDEO, 1910 .amux = EM28XX_AMUX_LINE_IN, 1911 } }, 1912 }, 1913 [EM2882_BOARD_TERRATEC_HYBRID_XS] = { 1914 .name = "Terratec Cinnergy Hybrid T USB XS (em2882)", 1915 .tuner_type = TUNER_XC2028, 1916 .tuner_gpio = default_tuner_gpio, 1917 .mts_firmware = 1, 1918 .decoder = EM28XX_TVP5150, 1919 .has_dvb = 1, 1920 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1921 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS, 1922 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1923 .input = { { 1924 .type = EM28XX_VMUX_TELEVISION, 1925 .vmux = TVP5150_COMPOSITE0, 1926 .amux = EM28XX_AMUX_VIDEO, 1927 .gpio = hauppauge_wintv_hvr_900_analog, 1928 }, { 1929 .type = EM28XX_VMUX_COMPOSITE, 1930 .vmux = TVP5150_COMPOSITE1, 1931 .amux = EM28XX_AMUX_LINE_IN, 1932 .gpio = hauppauge_wintv_hvr_900_analog, 1933 }, { 1934 .type = EM28XX_VMUX_SVIDEO, 1935 .vmux = TVP5150_SVIDEO, 1936 .amux = EM28XX_AMUX_LINE_IN, 1937 .gpio = hauppauge_wintv_hvr_900_analog, 1938 } }, 1939 }, 1940 [EM2882_BOARD_DIKOM_DK300] = { 1941 .name = "Dikom DK300", 1942 .tuner_type = TUNER_XC2028, 1943 .tuner_gpio = default_tuner_gpio, 1944 .decoder = EM28XX_TVP5150, 1945 .mts_firmware = 1, 1946 .has_dvb = 1, 1947 .dvb_gpio = dikom_dk300_digital, 1948 .input = { { 1949 .type = EM28XX_VMUX_TELEVISION, 1950 .vmux = TVP5150_COMPOSITE0, 1951 .amux = EM28XX_AMUX_VIDEO, 1952 .gpio = default_analog, 1953 } }, 1954 }, 1955 [EM2883_BOARD_KWORLD_HYBRID_330U] = { 1956 .name = "Kworld PlusTV HD Hybrid 330", 1957 .tuner_type = TUNER_XC2028, 1958 .tuner_gpio = default_tuner_gpio, 1959 .decoder = EM28XX_TVP5150, 1960 .mts_firmware = 1, 1961 .has_dvb = 1, 1962 .dvb_gpio = kworld_330u_digital, 1963 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1964 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1965 EM28XX_I2C_EEPROM_ON_BOARD | 1966 EM28XX_I2C_EEPROM_KEY_VALID, 1967 .input = { { 1968 .type = EM28XX_VMUX_TELEVISION, 1969 .vmux = TVP5150_COMPOSITE0, 1970 .amux = EM28XX_AMUX_VIDEO, 1971 .gpio = kworld_330u_analog, 1972 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1973 }, { 1974 .type = EM28XX_VMUX_COMPOSITE, 1975 .vmux = TVP5150_COMPOSITE1, 1976 .amux = EM28XX_AMUX_LINE_IN, 1977 .gpio = kworld_330u_analog, 1978 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1979 }, { 1980 .type = EM28XX_VMUX_SVIDEO, 1981 .vmux = TVP5150_SVIDEO, 1982 .amux = EM28XX_AMUX_LINE_IN, 1983 .gpio = kworld_330u_analog, 1984 } }, 1985 }, 1986 [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = { 1987 .name = "Compro VideoMate ForYou/Stereo", 1988 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1989 .tvaudio_addr = 0xb0, 1990 .tda9887_conf = TDA9887_PRESENT, 1991 .decoder = EM28XX_TVP5150, 1992 .adecoder = EM28XX_TVAUDIO, 1993 .mute_gpio = compro_mute_gpio, 1994 .input = { { 1995 .type = EM28XX_VMUX_TELEVISION, 1996 .vmux = TVP5150_COMPOSITE0, 1997 .amux = EM28XX_AMUX_VIDEO, 1998 .gpio = compro_unmute_tv_gpio, 1999 }, { 2000 .type = EM28XX_VMUX_SVIDEO, 2001 .vmux = TVP5150_SVIDEO, 2002 .amux = EM28XX_AMUX_LINE_IN, 2003 .gpio = compro_unmute_svid_gpio, 2004 } }, 2005 }, 2006 [EM2860_BOARD_KAIOMY_TVNPC_U2] = { 2007 .name = "Kaiomy TVnPC U2", 2008 .vchannels = 3, 2009 .tuner_type = TUNER_XC2028, 2010 .tuner_addr = 0x61, 2011 .mts_firmware = 1, 2012 .decoder = EM28XX_TVP5150, 2013 .tuner_gpio = default_tuner_gpio, 2014 .ir_codes = RC_MAP_KAIOMY, 2015 .input = { { 2016 .type = EM28XX_VMUX_TELEVISION, 2017 .vmux = TVP5150_COMPOSITE0, 2018 .amux = EM28XX_AMUX_VIDEO, 2019 2020 }, { 2021 .type = EM28XX_VMUX_COMPOSITE, 2022 .vmux = TVP5150_COMPOSITE1, 2023 .amux = EM28XX_AMUX_LINE_IN, 2024 }, { 2025 .type = EM28XX_VMUX_SVIDEO, 2026 .vmux = TVP5150_SVIDEO, 2027 .amux = EM28XX_AMUX_LINE_IN, 2028 } }, 2029 .radio = { 2030 .type = EM28XX_RADIO, 2031 .amux = EM28XX_AMUX_LINE_IN, 2032 } 2033 }, 2034 [EM2860_BOARD_EASYCAP] = { 2035 .name = "Easy Cap Capture DC-60", 2036 .vchannels = 2, 2037 .tuner_type = TUNER_ABSENT, 2038 .decoder = EM28XX_SAA711X, 2039 .input = { { 2040 .type = EM28XX_VMUX_COMPOSITE, 2041 .vmux = SAA7115_COMPOSITE0, 2042 .amux = EM28XX_AMUX_LINE_IN, 2043 }, { 2044 .type = EM28XX_VMUX_SVIDEO, 2045 .vmux = SAA7115_SVIDEO3, 2046 .amux = EM28XX_AMUX_LINE_IN, 2047 } }, 2048 }, 2049 [EM2820_BOARD_IODATA_GVMVP_SZ] = { 2050 .name = "IO-DATA GV-MVP/SZ", 2051 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 2052 .tuner_gpio = default_tuner_gpio, 2053 .tda9887_conf = TDA9887_PRESENT, 2054 .decoder = EM28XX_TVP5150, 2055 .input = { { 2056 .type = EM28XX_VMUX_TELEVISION, 2057 .vmux = TVP5150_COMPOSITE0, 2058 .amux = EM28XX_AMUX_VIDEO, 2059 }, { /* Composite has not been tested yet */ 2060 .type = EM28XX_VMUX_COMPOSITE, 2061 .vmux = TVP5150_COMPOSITE1, 2062 .amux = EM28XX_AMUX_VIDEO, 2063 }, { /* S-video has not been tested yet */ 2064 .type = EM28XX_VMUX_SVIDEO, 2065 .vmux = TVP5150_SVIDEO, 2066 .amux = EM28XX_AMUX_VIDEO, 2067 } }, 2068 }, 2069 [EM2860_BOARD_TERRATEC_GRABBY] = { 2070 .name = "Terratec Grabby", 2071 .vchannels = 2, 2072 .tuner_type = TUNER_ABSENT, 2073 .decoder = EM28XX_SAA711X, 2074 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 2075 .input = { { 2076 .type = EM28XX_VMUX_COMPOSITE, 2077 .vmux = SAA7115_COMPOSITE0, 2078 .amux = EM28XX_AMUX_LINE_IN, 2079 }, { 2080 .type = EM28XX_VMUX_SVIDEO, 2081 .vmux = SAA7115_SVIDEO3, 2082 .amux = EM28XX_AMUX_LINE_IN, 2083 } }, 2084 .buttons = std_snapshot_button, 2085 .leds = terratec_grabby_leds, 2086 }, 2087 [EM2860_BOARD_TERRATEC_AV350] = { 2088 .name = "Terratec AV350", 2089 .vchannels = 2, 2090 .tuner_type = TUNER_ABSENT, 2091 .decoder = EM28XX_TVP5150, 2092 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 2093 .mute_gpio = terratec_av350_mute_gpio, 2094 .input = { { 2095 .type = EM28XX_VMUX_COMPOSITE, 2096 .vmux = TVP5150_COMPOSITE1, 2097 .amux = EM28XX_AUDIO_SRC_LINE, 2098 .gpio = terratec_av350_unmute_gpio, 2099 2100 }, { 2101 .type = EM28XX_VMUX_SVIDEO, 2102 .vmux = TVP5150_SVIDEO, 2103 .amux = EM28XX_AUDIO_SRC_LINE, 2104 .gpio = terratec_av350_unmute_gpio, 2105 } }, 2106 }, 2107 2108 [EM2860_BOARD_ELGATO_VIDEO_CAPTURE] = { 2109 .name = "Elgato Video Capture", 2110 .decoder = EM28XX_SAA711X, 2111 .tuner_type = TUNER_ABSENT, /* Capture only device */ 2112 .input = { { 2113 .type = EM28XX_VMUX_COMPOSITE, 2114 .vmux = SAA7115_COMPOSITE0, 2115 .amux = EM28XX_AMUX_LINE_IN, 2116 }, { 2117 .type = EM28XX_VMUX_SVIDEO, 2118 .vmux = SAA7115_SVIDEO3, 2119 .amux = EM28XX_AMUX_LINE_IN, 2120 } }, 2121 }, 2122 2123 [EM2882_BOARD_EVGA_INDTUBE] = { 2124 .name = "Evga inDtube", 2125 .tuner_type = TUNER_XC2028, 2126 .tuner_gpio = default_tuner_gpio, 2127 .decoder = EM28XX_TVP5150, 2128 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 2129 .mts_firmware = 1, 2130 .has_dvb = 1, 2131 .dvb_gpio = evga_indtube_digital, 2132 .ir_codes = RC_MAP_EVGA_INDTUBE, 2133 .input = { { 2134 .type = EM28XX_VMUX_TELEVISION, 2135 .vmux = TVP5150_COMPOSITE0, 2136 .amux = EM28XX_AMUX_VIDEO, 2137 .gpio = evga_indtube_analog, 2138 }, { 2139 .type = EM28XX_VMUX_COMPOSITE, 2140 .vmux = TVP5150_COMPOSITE1, 2141 .amux = EM28XX_AMUX_LINE_IN, 2142 .gpio = evga_indtube_analog, 2143 }, { 2144 .type = EM28XX_VMUX_SVIDEO, 2145 .vmux = TVP5150_SVIDEO, 2146 .amux = EM28XX_AMUX_LINE_IN, 2147 .gpio = evga_indtube_analog, 2148 } }, 2149 }, 2150 /* eb1a:2868 Empia EM2870 + Philips CU1216L NIM (Philips TDA10023 + 2151 Infineon TUA6034) */ 2152 [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = { 2153 .name = "Reddo DVB-C USB TV Box", 2154 .tuner_type = TUNER_ABSENT, 2155 .tuner_gpio = reddo_dvb_c_usb_box, 2156 .has_dvb = 1, 2157 }, 2158 /* 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold 2159 * initially as the KWorld PlusTV 340U, then as the UB435-Q. 2160 * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 */ 2161 [EM2870_BOARD_KWORLD_A340] = { 2162 .name = "KWorld PlusTV 340U or UB435-Q (ATSC)", 2163 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */ 2164 .has_dvb = 1, 2165 .dvb_gpio = kworld_a340_digital, 2166 .tuner_gpio = default_tuner_gpio, 2167 }, 2168 /* 2013:024f PCTV nanoStick T2 290e. 2169 * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 */ 2170 [EM28174_BOARD_PCTV_290E] = { 2171 .name = "PCTV nanoStick T2 290e", 2172 .def_i2c_bus = 1, 2173 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ, 2174 .tuner_type = TUNER_ABSENT, 2175 .tuner_gpio = pctv_290e, 2176 .has_dvb = 1, 2177 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2178 }, 2179 /* 2013:024f PCTV DVB-S2 Stick 460e 2180 * Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293 */ 2181 [EM28174_BOARD_PCTV_460E] = { 2182 .def_i2c_bus = 1, 2183 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, 2184 .name = "PCTV DVB-S2 Stick (460e)", 2185 .tuner_type = TUNER_ABSENT, 2186 .tuner_gpio = pctv_460e, 2187 .has_dvb = 1, 2188 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2189 }, 2190 /* eb1a:5006 Honestech VIDBOX NW03 2191 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner */ 2192 [EM2860_BOARD_HT_VIDBOX_NW03] = { 2193 .name = "Honestech Vidbox NW03", 2194 .tuner_type = TUNER_ABSENT, 2195 .decoder = EM28XX_SAA711X, 2196 .input = { { 2197 .type = EM28XX_VMUX_COMPOSITE, 2198 .vmux = SAA7115_COMPOSITE0, 2199 .amux = EM28XX_AMUX_LINE_IN, 2200 }, { 2201 .type = EM28XX_VMUX_SVIDEO, 2202 .vmux = SAA7115_SVIDEO3, /* S-VIDEO needs confirming */ 2203 .amux = EM28XX_AMUX_LINE_IN, 2204 } }, 2205 }, 2206 /* 1b80:e425 MaxMedia UB425-TC 2207 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 */ 2208 [EM2874_BOARD_MAXMEDIA_UB425_TC] = { 2209 .name = "MaxMedia UB425-TC", 2210 .tuner_type = TUNER_ABSENT, 2211 .tuner_gpio = maxmedia_ub425_tc, 2212 .has_dvb = 1, 2213 .ir_codes = RC_MAP_REDDO, 2214 .def_i2c_bus = 1, 2215 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2216 EM28XX_I2C_FREQ_400_KHZ, 2217 }, 2218 /* 2304:0242 PCTV QuatroStick (510e) 2219 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */ 2220 [EM2884_BOARD_PCTV_510E] = { 2221 .name = "PCTV QuatroStick (510e)", 2222 .tuner_type = TUNER_ABSENT, 2223 .tuner_gpio = pctv_510e, 2224 .has_dvb = 1, 2225 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2226 .def_i2c_bus = 1, 2227 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2228 EM28XX_I2C_FREQ_400_KHZ, 2229 }, 2230 /* 2013:0251 PCTV QuatroStick nano (520e) 2231 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */ 2232 [EM2884_BOARD_PCTV_520E] = { 2233 .name = "PCTV QuatroStick nano (520e)", 2234 .tuner_type = TUNER_ABSENT, 2235 .tuner_gpio = pctv_520e, 2236 .has_dvb = 1, 2237 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2238 .def_i2c_bus = 1, 2239 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2240 EM28XX_I2C_FREQ_400_KHZ, 2241 }, 2242 [EM2884_BOARD_TERRATEC_HTC_USB_XS] = { 2243 .name = "Terratec Cinergy HTC USB XS", 2244 .has_dvb = 1, 2245 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, 2246 .tuner_type = TUNER_ABSENT, 2247 .def_i2c_bus = 1, 2248 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2249 EM28XX_I2C_FREQ_400_KHZ, 2250 }, 2251 /* 1b80:e1cc Delock 61959 2252 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 2253 * mostly the same as MaxMedia UB-425-TC but different remote */ 2254 [EM2874_BOARD_DELOCK_61959] = { 2255 .name = "Delock 61959", 2256 .tuner_type = TUNER_ABSENT, 2257 .tuner_gpio = maxmedia_ub425_tc, 2258 .has_dvb = 1, 2259 .ir_codes = RC_MAP_DELOCK_61959, 2260 .def_i2c_bus = 1, 2261 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2262 EM28XX_I2C_FREQ_400_KHZ, 2263 }, 2264 /* 2265 * 1b80:e346 KWorld USB ATSC TV Stick UB435-Q V2 2266 * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2 2267 */ 2268 [EM2874_BOARD_KWORLD_UB435Q_V2] = { 2269 .name = "KWorld USB ATSC TV Stick UB435-Q V2", 2270 .tuner_type = TUNER_ABSENT, 2271 .has_dvb = 1, 2272 .dvb_gpio = kworld_a340_digital, 2273 .tuner_gpio = default_tuner_gpio, 2274 .def_i2c_bus = 1, 2275 }, 2276 /* 2277 * 1b80:e34c KWorld USB ATSC TV Stick UB435-Q V3 2278 * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2 2279 */ 2280 [EM2874_BOARD_KWORLD_UB435Q_V3] = { 2281 .name = "KWorld USB ATSC TV Stick UB435-Q V3", 2282 .tuner_type = TUNER_ABSENT, 2283 .has_dvb = 1, 2284 .tuner_gpio = kworld_ub435q_v3_digital, 2285 .def_i2c_bus = 1, 2286 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2287 EM28XX_I2C_FREQ_100_KHZ, 2288 .leds = kworld_ub435q_v3_leds, 2289 }, 2290 [EM2874_BOARD_PCTV_HD_MINI_80E] = { 2291 .name = "Pinnacle PCTV HD Mini", 2292 .tuner_type = TUNER_ABSENT, 2293 .has_dvb = 1, 2294 .dvb_gpio = em2874_pctv_80e_digital, 2295 .decoder = EM28XX_NODECODER, 2296 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2297 .leds = pctv_80e_leds, 2298 }, 2299 /* 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam 2300 * Empia EM2765 + OmniVision OV2640 */ 2301 [EM2765_BOARD_SPEEDLINK_VAD_LAPLACE] = { 2302 .name = "SpeedLink Vicious And Devine Laplace webcam", 2303 .xclk = EM28XX_XCLK_FREQUENCY_24MHZ, 2304 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2305 EM28XX_I2C_FREQ_100_KHZ, 2306 .def_i2c_bus = 1, 2307 .tuner_type = TUNER_ABSENT, 2308 .is_webcam = 1, 2309 .input = { { 2310 .type = EM28XX_VMUX_COMPOSITE, 2311 .amux = EM28XX_AMUX_VIDEO, 2312 .gpio = speedlink_vad_laplace_reg_seq, 2313 } }, 2314 .buttons = speedlink_vad_laplace_buttons, 2315 .leds = speedlink_vad_laplace_leds, 2316 }, 2317 /* 2013:0258 PCTV DVB-S2 Stick (461e) 2318 * Empia EM28178, Montage M88DS3103, Montage M88TS2022, Allegro A8293 */ 2319 [EM28178_BOARD_PCTV_461E] = { 2320 .def_i2c_bus = 1, 2321 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, 2322 .name = "PCTV DVB-S2 Stick (461e)", 2323 .tuner_type = TUNER_ABSENT, 2324 .tuner_gpio = pctv_461e, 2325 .has_dvb = 1, 2326 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2327 }, 2328 /* 2013:025f PCTV tripleStick (292e). 2329 * Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2157 */ 2330 [EM28178_BOARD_PCTV_292E] = { 2331 .name = "PCTV tripleStick (292e)", 2332 .def_i2c_bus = 1, 2333 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, 2334 .tuner_type = TUNER_ABSENT, 2335 .tuner_gpio = pctv_292e, 2336 .has_dvb = 1, 2337 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2338 }, 2339 [EM2861_BOARD_LEADTEK_VC100] = { 2340 .name = "Leadtek VC100", 2341 .tuner_type = TUNER_ABSENT, /* Capture only device */ 2342 .decoder = EM28XX_TVP5150, 2343 .input = { { 2344 .type = EM28XX_VMUX_COMPOSITE, 2345 .vmux = TVP5150_COMPOSITE1, 2346 .amux = EM28XX_AMUX_LINE_IN, 2347 }, { 2348 .type = EM28XX_VMUX_SVIDEO, 2349 .vmux = TVP5150_SVIDEO, 2350 .amux = EM28XX_AMUX_LINE_IN, 2351 } }, 2352 }, 2353 /* eb1a:8179 Terratec Cinergy T2 Stick HD. 2354 * Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2146 */ 2355 [EM28178_BOARD_TERRATEC_T2_STICK_HD] = { 2356 .name = "Terratec Cinergy T2 Stick HD", 2357 .def_i2c_bus = 1, 2358 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, 2359 .tuner_type = TUNER_ABSENT, 2360 .tuner_gpio = terratec_t2_stick_hd, 2361 .has_dvb = 1, 2362 .ir_codes = RC_MAP_TERRATEC_SLIM_2, 2363 }, 2364 2365 /* 2366 * 3275:0085 PLEX PX-BCUD. 2367 * Empia EM28178, TOSHIBA TC90532XBG, Sharp QM1D1C0042 2368 */ 2369 [EM28178_BOARD_PLEX_PX_BCUD] = { 2370 .name = "PLEX PX-BCUD", 2371 .xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ, 2372 .def_i2c_bus = 1, 2373 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 2374 .tuner_type = TUNER_ABSENT, 2375 .tuner_gpio = plex_px_bcud, 2376 .has_dvb = 1, 2377 }, 2378 /* 2379 * 2040:0265 Hauppauge WinTV-dualHD (DVB version). 2380 * Empia EM28274, 2x Silicon Labs Si2168, 2x Silicon Labs Si2157 2381 */ 2382 [EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB] = { 2383 .name = "Hauppauge WinTV-dualHD DVB", 2384 .def_i2c_bus = 1, 2385 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2386 EM28XX_I2C_FREQ_400_KHZ, 2387 .tuner_type = TUNER_ABSENT, 2388 .tuner_gpio = hauppauge_dualhd_dvb, 2389 .has_dvb = 1, 2390 .ir_codes = RC_MAP_HAUPPAUGE, 2391 .leds = hauppauge_dualhd_leds, 2392 }, 2393 /* 2394 * 2040:026d Hauppauge WinTV-dualHD (model 01595 - ATSC/QAM). 2395 * Empia EM28274, 2x LG LGDT3306A, 2x Silicon Labs Si2157 2396 */ 2397 [EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595] = { 2398 .name = "Hauppauge WinTV-dualHD 01595 ATSC/QAM", 2399 .def_i2c_bus = 1, 2400 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2401 EM28XX_I2C_FREQ_400_KHZ, 2402 .tuner_type = TUNER_ABSENT, 2403 .tuner_gpio = hauppauge_dualhd_dvb, 2404 .has_dvb = 1, 2405 .ir_codes = RC_MAP_HAUPPAUGE, 2406 .leds = hauppauge_dualhd_leds, 2407 }, 2408 }; 2409 EXPORT_SYMBOL_GPL(em28xx_boards); 2410 2411 static const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); 2412 2413 /* table of devices that work with this driver */ 2414 struct usb_device_id em28xx_id_table[] = { 2415 { USB_DEVICE(0xeb1a, 0x2750), 2416 .driver_info = EM2750_BOARD_UNKNOWN }, 2417 { USB_DEVICE(0xeb1a, 0x2751), 2418 .driver_info = EM2750_BOARD_UNKNOWN }, 2419 { USB_DEVICE(0xeb1a, 0x2800), 2420 .driver_info = EM2800_BOARD_UNKNOWN }, 2421 { USB_DEVICE(0xeb1a, 0x2710), 2422 .driver_info = EM2820_BOARD_UNKNOWN }, 2423 { USB_DEVICE(0xeb1a, 0x2820), 2424 .driver_info = EM2820_BOARD_UNKNOWN }, 2425 { USB_DEVICE(0xeb1a, 0x2821), 2426 .driver_info = EM2820_BOARD_UNKNOWN }, 2427 { USB_DEVICE(0xeb1a, 0x2860), 2428 .driver_info = EM2820_BOARD_UNKNOWN }, 2429 { USB_DEVICE(0xeb1a, 0x2861), 2430 .driver_info = EM2820_BOARD_UNKNOWN }, 2431 { USB_DEVICE(0xeb1a, 0x2862), 2432 .driver_info = EM2820_BOARD_UNKNOWN }, 2433 { USB_DEVICE(0xeb1a, 0x2863), 2434 .driver_info = EM2820_BOARD_UNKNOWN }, 2435 { USB_DEVICE(0xeb1a, 0x2870), 2436 .driver_info = EM2820_BOARD_UNKNOWN }, 2437 { USB_DEVICE(0xeb1a, 0x2881), 2438 .driver_info = EM2820_BOARD_UNKNOWN }, 2439 { USB_DEVICE(0xeb1a, 0x2883), 2440 .driver_info = EM2820_BOARD_UNKNOWN }, 2441 { USB_DEVICE(0xeb1a, 0x2868), 2442 .driver_info = EM2820_BOARD_UNKNOWN }, 2443 { USB_DEVICE(0xeb1a, 0x2875), 2444 .driver_info = EM2820_BOARD_UNKNOWN }, 2445 { USB_DEVICE(0xeb1a, 0x2885), /* MSI Digivox Trio */ 2446 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2447 { USB_DEVICE(0xeb1a, 0xe300), 2448 .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U }, 2449 { USB_DEVICE(0xeb1a, 0xe303), 2450 .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 }, 2451 { USB_DEVICE(0xeb1a, 0xe305), 2452 .driver_info = EM2880_BOARD_KWORLD_DVB_305U }, 2453 { USB_DEVICE(0xeb1a, 0xe310), 2454 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD }, 2455 { USB_DEVICE(0xeb1a, 0xa313), 2456 .driver_info = EM2882_BOARD_KWORLD_ATSC_315U }, 2457 { USB_DEVICE(0xeb1a, 0xa316), 2458 .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U }, 2459 { USB_DEVICE(0xeb1a, 0xe320), 2460 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II }, 2461 { USB_DEVICE(0xeb1a, 0xe323), 2462 .driver_info = EM2882_BOARD_KWORLD_VS_DVBT }, 2463 { USB_DEVICE(0xeb1a, 0xe350), 2464 .driver_info = EM2870_BOARD_KWORLD_350U }, 2465 { USB_DEVICE(0xeb1a, 0xe355), 2466 .driver_info = EM2870_BOARD_KWORLD_355U }, 2467 { USB_DEVICE(0xeb1a, 0x2801), 2468 .driver_info = EM2800_BOARD_GRABBEEX_USB2800 }, 2469 { USB_DEVICE(0xeb1a, 0xe357), 2470 .driver_info = EM2870_BOARD_KWORLD_355U }, 2471 { USB_DEVICE(0xeb1a, 0xe359), 2472 .driver_info = EM2870_BOARD_KWORLD_355U }, 2473 { USB_DEVICE(0x1b80, 0xe302), 2474 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */ 2475 { USB_DEVICE(0x1b80, 0xe304), 2476 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kworld DVD Maker 2 */ 2477 { USB_DEVICE(0x0ccd, 0x0036), 2478 .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 }, 2479 { USB_DEVICE(0x0ccd, 0x004c), 2480 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR }, 2481 { USB_DEVICE(0x0ccd, 0x004f), 2482 .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS }, 2483 { USB_DEVICE(0x0ccd, 0x005e), 2484 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, 2485 { USB_DEVICE(0x0ccd, 0x0042), 2486 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, 2487 { USB_DEVICE(0x0ccd, 0x0043), 2488 .driver_info = EM2870_BOARD_TERRATEC_XS_MT2060 }, 2489 { USB_DEVICE(0x0ccd, 0x008e), /* Cinergy HTC USB XS Rev. 1 */ 2490 .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS }, 2491 { USB_DEVICE(0x0ccd, 0x00ac), /* Cinergy HTC USB XS Rev. 2 */ 2492 .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS }, 2493 { USB_DEVICE(0x0ccd, 0x10a2), /* H5 Rev. 1 */ 2494 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2495 { USB_DEVICE(0x0ccd, 0x10ad), /* H5 Rev. 2 */ 2496 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2497 { USB_DEVICE(0x0ccd, 0x10b6), /* H5 Rev. 3 */ 2498 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2499 { USB_DEVICE(0x0ccd, 0x0084), 2500 .driver_info = EM2860_BOARD_TERRATEC_AV350 }, 2501 { USB_DEVICE(0x0ccd, 0x0096), 2502 .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, 2503 { USB_DEVICE(0x0ccd, 0x10AF), 2504 .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, 2505 { USB_DEVICE(0x0ccd, 0x00b2), 2506 .driver_info = EM2884_BOARD_CINERGY_HTC_STICK }, 2507 { USB_DEVICE(0x0fd9, 0x0018), 2508 .driver_info = EM2884_BOARD_ELGATO_EYETV_HYBRID_2008 }, 2509 { USB_DEVICE(0x0fd9, 0x0033), 2510 .driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE }, 2511 { USB_DEVICE(0x185b, 0x2870), 2512 .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE }, 2513 { USB_DEVICE(0x185b, 0x2041), 2514 .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU }, 2515 { USB_DEVICE(0x2040, 0x4200), 2516 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, 2517 { USB_DEVICE(0x2040, 0x4201), 2518 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, 2519 { USB_DEVICE(0x2040, 0x6500), 2520 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 }, 2521 { USB_DEVICE(0x2040, 0x6502), 2522 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 }, 2523 { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */ 2524 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2525 { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */ 2526 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2527 { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */ 2528 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2529 { USB_DEVICE(0x2040, 0x651f), 2530 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 }, 2531 { USB_DEVICE(0x2040, 0x0265), 2532 .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB }, 2533 { USB_DEVICE(0x2040, 0x026d), 2534 .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595 }, 2535 { USB_DEVICE(0x0438, 0xb002), 2536 .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 }, 2537 { USB_DEVICE(0x2001, 0xf112), 2538 .driver_info = EM2820_BOARD_DLINK_USB_TV }, 2539 { USB_DEVICE(0x2304, 0x0207), 2540 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2541 { USB_DEVICE(0x2304, 0x0208), 2542 .driver_info = EM2820_BOARD_PINNACLE_USB_2 }, 2543 { USB_DEVICE(0x2304, 0x021a), 2544 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2545 { USB_DEVICE(0x2304, 0x0226), 2546 .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E }, 2547 { USB_DEVICE(0x2304, 0x0227), 2548 .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO }, 2549 { USB_DEVICE(0x2304, 0x023f), 2550 .driver_info = EM2874_BOARD_PCTV_HD_MINI_80E }, 2551 { USB_DEVICE(0x0413, 0x6023), 2552 .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII }, 2553 { USB_DEVICE(0x093b, 0xa003), 2554 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2555 { USB_DEVICE(0x093b, 0xa005), 2556 .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U }, 2557 { USB_DEVICE(0x04bb, 0x0515), 2558 .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ }, 2559 { USB_DEVICE(0xeb1a, 0x50a6), 2560 .driver_info = EM2860_BOARD_GADMEI_UTV330 }, 2561 { USB_DEVICE(0x1b80, 0xa340), 2562 .driver_info = EM2870_BOARD_KWORLD_A340 }, 2563 { USB_DEVICE(0x1b80, 0xe346), 2564 .driver_info = EM2874_BOARD_KWORLD_UB435Q_V2 }, 2565 { USB_DEVICE(0x1b80, 0xe34c), 2566 .driver_info = EM2874_BOARD_KWORLD_UB435Q_V3 }, 2567 { USB_DEVICE(0x2013, 0x024f), 2568 .driver_info = EM28174_BOARD_PCTV_290E }, 2569 { USB_DEVICE(0x2013, 0x024c), 2570 .driver_info = EM28174_BOARD_PCTV_460E }, 2571 { USB_DEVICE(0x2040, 0x1605), 2572 .driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C }, 2573 { USB_DEVICE(0x1b80, 0xe755), 2574 .driver_info = EM2884_BOARD_C3TECH_DIGITAL_DUO }, 2575 { USB_DEVICE(0xeb1a, 0x5006), 2576 .driver_info = EM2860_BOARD_HT_VIDBOX_NW03 }, 2577 { USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */ 2578 .driver_info = EM2860_BOARD_EASYCAP }, 2579 { USB_DEVICE(0x1b80, 0xe425), 2580 .driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC }, 2581 { USB_DEVICE(0x2304, 0x0242), 2582 .driver_info = EM2884_BOARD_PCTV_510E }, 2583 { USB_DEVICE(0x2013, 0x0251), 2584 .driver_info = EM2884_BOARD_PCTV_520E }, 2585 { USB_DEVICE(0x1b80, 0xe1cc), 2586 .driver_info = EM2874_BOARD_DELOCK_61959 }, 2587 { USB_DEVICE(0x1ae7, 0x9003), 2588 .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE }, 2589 { USB_DEVICE(0x1ae7, 0x9004), 2590 .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE }, 2591 { USB_DEVICE(0x2013, 0x0258), 2592 .driver_info = EM28178_BOARD_PCTV_461E }, 2593 { USB_DEVICE(0x2013, 0x025f), 2594 .driver_info = EM28178_BOARD_PCTV_292E }, 2595 { USB_DEVICE(0x2040, 0x0264), /* Hauppauge WinTV-soloHD */ 2596 .driver_info = EM28178_BOARD_PCTV_292E }, 2597 { USB_DEVICE(0x0413, 0x6f07), 2598 .driver_info = EM2861_BOARD_LEADTEK_VC100 }, 2599 { USB_DEVICE(0xeb1a, 0x8179), 2600 .driver_info = EM28178_BOARD_TERRATEC_T2_STICK_HD }, 2601 { USB_DEVICE(0x3275, 0x0085), 2602 .driver_info = EM28178_BOARD_PLEX_PX_BCUD }, 2603 { }, 2604 }; 2605 MODULE_DEVICE_TABLE(usb, em28xx_id_table); 2606 2607 /* 2608 * EEPROM hash table for devices with generic USB IDs 2609 */ 2610 static struct em28xx_hash_table em28xx_eeprom_hash[] = { 2611 /* P/N: SA 60002070465 Tuner: TVF7533-MF */ 2612 {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF}, 2613 {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF}, 2614 {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028}, 2615 {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028}, 2616 {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028}, 2617 {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028}, 2618 {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT}, 2619 {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028}, 2620 }; 2621 2622 /* I2C devicelist hash table for devices with generic USB IDs */ 2623 static struct em28xx_hash_table em28xx_i2c_hash[] = { 2624 {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC}, 2625 {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC}, 2626 {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT}, 2627 {0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT}, 2628 {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC}, 2629 {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF}, 2630 {0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT}, 2631 }; 2632 2633 /* NOTE: introduce a separate hash table for devices with 16 bit eeproms */ 2634 2635 int em28xx_tuner_callback(void *ptr, int component, int command, int arg) 2636 { 2637 struct em28xx_i2c_bus *i2c_bus = ptr; 2638 struct em28xx *dev = i2c_bus->dev; 2639 int rc = 0; 2640 2641 if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000) 2642 return 0; 2643 2644 if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET) 2645 return 0; 2646 2647 rc = em28xx_gpio_set(dev, dev->board.tuner_gpio); 2648 2649 return rc; 2650 } 2651 EXPORT_SYMBOL_GPL(em28xx_tuner_callback); 2652 2653 static inline void em28xx_set_model(struct em28xx *dev) 2654 { 2655 dev->board = em28xx_boards[dev->model]; 2656 2657 /* Those are the default values for the majority of boards 2658 Use those values if not specified otherwise at boards entry 2659 */ 2660 if (!dev->board.xclk) 2661 dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE | 2662 EM28XX_XCLK_FREQUENCY_12MHZ; 2663 2664 if (!dev->board.i2c_speed) 2665 dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2666 EM28XX_I2C_FREQ_100_KHZ; 2667 2668 /* Should be initialized early, for I2C to work */ 2669 dev->def_i2c_bus = dev->board.def_i2c_bus; 2670 } 2671 2672 /* Wait until AC97_RESET reports the expected value reliably before proceeding. 2673 * We also check that two unrelated registers accesses don't return the same 2674 * value to avoid premature return. 2675 * This procedure helps ensuring AC97 register accesses are reliable. 2676 */ 2677 static int em28xx_wait_until_ac97_features_equals(struct em28xx *dev, 2678 int expected_feat) 2679 { 2680 unsigned long timeout = jiffies + msecs_to_jiffies(2000); 2681 int feat, powerdown; 2682 2683 while (time_is_after_jiffies(timeout)) { 2684 feat = em28xx_read_ac97(dev, AC97_RESET); 2685 if (feat < 0) 2686 return feat; 2687 2688 powerdown = em28xx_read_ac97(dev, AC97_POWERDOWN); 2689 if (powerdown < 0) 2690 return powerdown; 2691 2692 if (feat == expected_feat && feat != powerdown) 2693 return 0; 2694 2695 msleep(50); 2696 } 2697 2698 dev_warn(&dev->intf->dev, "AC97 registers access is not reliable !\n"); 2699 return -ETIMEDOUT; 2700 } 2701 2702 /* Since em28xx_pre_card_setup() requires a proper dev->model, 2703 * this won't work for boards with generic PCI IDs 2704 */ 2705 static void em28xx_pre_card_setup(struct em28xx *dev) 2706 { 2707 /* Set the initial XCLK and I2C clock values based on the board 2708 definition */ 2709 em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f); 2710 if (!dev->board.is_em2800) 2711 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed); 2712 msleep(50); 2713 2714 /* request some modules */ 2715 switch (dev->model) { 2716 case EM2861_BOARD_PLEXTOR_PX_TV100U: 2717 /* Sets the msp34xx I2S speed */ 2718 dev->i2s_speed = 2048000; 2719 break; 2720 case EM2861_BOARD_KWORLD_PVRTV_300U: 2721 case EM2880_BOARD_KWORLD_DVB_305U: 2722 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x6d); 2723 msleep(10); 2724 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x7d); 2725 msleep(10); 2726 break; 2727 case EM2870_BOARD_COMPRO_VIDEOMATE: 2728 /* TODO: someone can do some cleanup here... 2729 not everything's needed */ 2730 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); 2731 msleep(10); 2732 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01); 2733 msleep(10); 2734 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 2735 mdelay(70); 2736 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc); 2737 mdelay(70); 2738 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xdc); 2739 mdelay(70); 2740 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc); 2741 mdelay(70); 2742 break; 2743 case EM2870_BOARD_TERRATEC_XS_MT2060: 2744 /* this device needs some gpio writes to get the DVB-T 2745 demod work */ 2746 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2747 mdelay(70); 2748 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde); 2749 mdelay(70); 2750 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2751 mdelay(70); 2752 break; 2753 case EM2870_BOARD_PINNACLE_PCTV_DVB: 2754 /* this device needs some gpio writes to get the 2755 DVB-T demod work */ 2756 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2757 mdelay(70); 2758 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde); 2759 mdelay(70); 2760 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2761 mdelay(70); 2762 break; 2763 case EM2820_BOARD_GADMEI_UTV310: 2764 case EM2820_BOARD_MSI_VOX_USB_2: 2765 /* enables audio for that devices */ 2766 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 2767 break; 2768 2769 case EM2882_BOARD_KWORLD_ATSC_315U: 2770 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); 2771 msleep(10); 2772 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2773 msleep(10); 2774 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); 2775 msleep(10); 2776 em28xx_write_reg(dev, EM2880_R04_GPO, 0x08); 2777 msleep(10); 2778 break; 2779 2780 case EM2860_BOARD_KAIOMY_TVNPC_U2: 2781 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1); 2782 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1); 2783 em28xx_write_regs(dev, 0x0d, "\x42", 1); 2784 em28xx_write_regs(dev, 0x08, "\xfd", 1); 2785 msleep(10); 2786 em28xx_write_regs(dev, 0x08, "\xff", 1); 2787 msleep(10); 2788 em28xx_write_regs(dev, 0x08, "\x7f", 1); 2789 msleep(10); 2790 em28xx_write_regs(dev, 0x08, "\x6b", 1); 2791 2792 break; 2793 case EM2860_BOARD_EASYCAP: 2794 em28xx_write_regs(dev, 0x08, "\xf8", 1); 2795 break; 2796 2797 case EM2820_BOARD_IODATA_GVMVP_SZ: 2798 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); 2799 msleep(70); 2800 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7); 2801 msleep(10); 2802 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2803 msleep(70); 2804 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 2805 msleep(70); 2806 break; 2807 2808 case EM2860_BOARD_TERRATEC_GRABBY: 2809 /* HACK?: Ensure AC97 register reading is reliable before 2810 * proceeding. In practice, this will wait about 1.6 seconds. 2811 */ 2812 em28xx_wait_until_ac97_features_equals(dev, 0x6a90); 2813 break; 2814 } 2815 2816 em28xx_gpio_set(dev, dev->board.tuner_gpio); 2817 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 2818 2819 /* Unlock device */ 2820 em28xx_set_mode(dev, EM28XX_SUSPEND); 2821 } 2822 2823 static int em28xx_hint_board(struct em28xx *dev) 2824 { 2825 int i; 2826 2827 if (dev->board.is_webcam) { 2828 if (dev->em28xx_sensor == EM28XX_MT9V011) { 2829 dev->model = EM2820_BOARD_SILVERCREST_WEBCAM; 2830 } else if (dev->em28xx_sensor == EM28XX_MT9M001 || 2831 dev->em28xx_sensor == EM28XX_MT9M111) { 2832 dev->model = EM2750_BOARD_UNKNOWN; 2833 } 2834 /* FIXME: IMPROVE ! */ 2835 2836 return 0; 2837 } 2838 2839 /* HINT method: EEPROM 2840 * 2841 * This method works only for boards with eeprom. 2842 * Uses a hash of all eeprom bytes. The hash should be 2843 * unique for a vendor/tuner pair. 2844 * There are a high chance that tuners for different 2845 * video standards produce different hashes. 2846 */ 2847 for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) { 2848 if (dev->hash == em28xx_eeprom_hash[i].hash) { 2849 dev->model = em28xx_eeprom_hash[i].model; 2850 dev->tuner_type = em28xx_eeprom_hash[i].tuner; 2851 2852 dev_err(&dev->intf->dev, 2853 "Your board has no unique USB ID.\n" 2854 "A hint were successfully done, based on eeprom hash.\n" 2855 "This method is not 100%% failproof.\n" 2856 "If the board were missdetected, please email this log to:\n" 2857 "\tV4L Mailing List <linux-media@vger.kernel.org>\n" 2858 "Board detected as %s\n", 2859 em28xx_boards[dev->model].name); 2860 2861 return 0; 2862 } 2863 } 2864 2865 /* HINT method: I2C attached devices 2866 * 2867 * This method works for all boards. 2868 * Uses a hash of i2c scanned devices. 2869 * Devices with the same i2c attached chips will 2870 * be considered equal. 2871 * This method is less precise than the eeprom one. 2872 */ 2873 2874 /* user did not request i2c scanning => do it now */ 2875 if (!dev->i2c_hash) 2876 em28xx_do_i2c_scan(dev, dev->def_i2c_bus); 2877 2878 for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) { 2879 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) { 2880 dev->model = em28xx_i2c_hash[i].model; 2881 dev->tuner_type = em28xx_i2c_hash[i].tuner; 2882 dev_err(&dev->intf->dev, 2883 "Your board has no unique USB ID.\n" 2884 "A hint were successfully done, based on i2c devicelist hash.\n" 2885 "This method is not 100%% failproof.\n" 2886 "If the board were missdetected, please email this log to:\n" 2887 "\tV4L Mailing List <linux-media@vger.kernel.org>\n" 2888 "Board detected as %s\n", 2889 em28xx_boards[dev->model].name); 2890 2891 return 0; 2892 } 2893 } 2894 2895 dev_err(&dev->intf->dev, 2896 "Your board has no unique USB ID and thus need a hint to be detected.\n" 2897 "You may try to use card=<n> insmod option to workaround that.\n" 2898 "Please send an email with this log to:\n" 2899 "\tV4L Mailing List <linux-media@vger.kernel.org>\n" 2900 "Board eeprom hash is 0x%08lx\n" 2901 "Board i2c devicelist hash is 0x%08lx\n", 2902 dev->hash, dev->i2c_hash); 2903 2904 dev_err(&dev->intf->dev, 2905 "Here is a list of valid choices for the card=<n> insmod option:\n"); 2906 for (i = 0; i < em28xx_bcount; i++) { 2907 dev_err(&dev->intf->dev, 2908 " card=%d -> %s\n", i, em28xx_boards[i].name); 2909 } 2910 return -1; 2911 } 2912 2913 static void em28xx_card_setup(struct em28xx *dev) 2914 { 2915 /* 2916 * If the device can be a webcam, seek for a sensor. 2917 * If sensor is not found, then it isn't a webcam. 2918 */ 2919 if (dev->board.is_webcam) { 2920 if (em28xx_detect_sensor(dev) < 0) 2921 dev->board.is_webcam = 0; 2922 } 2923 2924 switch (dev->model) { 2925 case EM2750_BOARD_UNKNOWN: 2926 case EM2820_BOARD_UNKNOWN: 2927 case EM2800_BOARD_UNKNOWN: 2928 /* 2929 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD. 2930 * 2931 * This occurs because they share identical USB vendor and 2932 * product IDs. 2933 * 2934 * What we do here is look up the EEPROM hash of the K-WORLD 2935 * and if it is found then we decide that we do not have 2936 * a DIGIVOX and reset the device to the K-WORLD instead. 2937 * 2938 * This solution is only valid if they do not share eeprom 2939 * hash identities which has not been determined as yet. 2940 */ 2941 if (em28xx_hint_board(dev) < 0) 2942 dev_err(&dev->intf->dev, "Board not discovered\n"); 2943 else { 2944 em28xx_set_model(dev); 2945 em28xx_pre_card_setup(dev); 2946 } 2947 break; 2948 default: 2949 em28xx_set_model(dev); 2950 } 2951 2952 dev_info(&dev->intf->dev, "Identified as %s (card=%d)\n", 2953 dev->board.name, dev->model); 2954 2955 dev->tuner_type = em28xx_boards[dev->model].tuner_type; 2956 2957 /* request some modules */ 2958 switch (dev->model) { 2959 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2: 2960 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: 2961 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: 2962 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: 2963 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: 2964 case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C: 2965 case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB: 2966 case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595: 2967 { 2968 struct tveeprom tv; 2969 2970 if (dev->eedata == NULL) 2971 break; 2972 #if defined(CONFIG_MODULES) && defined(MODULE) 2973 request_module("tveeprom"); 2974 #endif 2975 /* Call first TVeeprom */ 2976 2977 dev->i2c_client[dev->def_i2c_bus].addr = 0xa0 >> 1; 2978 tveeprom_hauppauge_analog(&dev->i2c_client[dev->def_i2c_bus], &tv, dev->eedata); 2979 2980 dev->tuner_type = tv.tuner_type; 2981 2982 if (tv.audio_processor == TVEEPROM_AUDPROC_MSP) { 2983 dev->i2s_speed = 2048000; 2984 dev->board.has_msp34xx = 1; 2985 } 2986 break; 2987 } 2988 case EM2882_BOARD_KWORLD_ATSC_315U: 2989 em28xx_write_reg(dev, 0x0d, 0x42); 2990 msleep(10); 2991 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 2992 msleep(10); 2993 break; 2994 case EM2820_BOARD_KWORLD_PVRTV2800RF: 2995 /* GPIO enables sound on KWORLD PVR TV 2800RF */ 2996 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf9); 2997 break; 2998 case EM2820_BOARD_UNKNOWN: 2999 case EM2800_BOARD_UNKNOWN: 3000 /* 3001 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD. 3002 * 3003 * This occurs because they share identical USB vendor and 3004 * product IDs. 3005 * 3006 * What we do here is look up the EEPROM hash of the K-WORLD 3007 * and if it is found then we decide that we do not have 3008 * a DIGIVOX and reset the device to the K-WORLD instead. 3009 * 3010 * This solution is only valid if they do not share eeprom 3011 * hash identities which has not been determined as yet. 3012 */ 3013 case EM2880_BOARD_MSI_DIGIVOX_AD: 3014 if (!em28xx_hint_board(dev)) 3015 em28xx_set_model(dev); 3016 3017 /* In cases where we had to use a board hint, the call to 3018 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, 3019 so make the call now so the analog GPIOs are set properly 3020 before probing the i2c bus. */ 3021 em28xx_gpio_set(dev, dev->board.tuner_gpio); 3022 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 3023 break; 3024 3025 /* 3026 * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR. 3027 * 3028 * This occurs because they share identical USB vendor and 3029 * product IDs. 3030 * 3031 * What we do here is look up the EEPROM hash of the Dikom 3032 * and if it is found then we decide that we do not have 3033 * a Kworld and reset the device to the Dikom instead. 3034 * 3035 * This solution is only valid if they do not share eeprom 3036 * hash identities which has not been determined as yet. 3037 */ 3038 case EM2882_BOARD_KWORLD_VS_DVBT: 3039 if (!em28xx_hint_board(dev)) 3040 em28xx_set_model(dev); 3041 3042 /* In cases where we had to use a board hint, the call to 3043 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, 3044 so make the call now so the analog GPIOs are set properly 3045 before probing the i2c bus. */ 3046 em28xx_gpio_set(dev, dev->board.tuner_gpio); 3047 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 3048 break; 3049 } 3050 3051 if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) { 3052 dev_err(&dev->intf->dev, 3053 "\n\n" 3054 "The support for this board weren't valid yet.\n" 3055 "Please send a report of having this working\n" 3056 "not to V4L mailing list (and/or to other addresses)\n\n"); 3057 } 3058 3059 /* Free eeprom data memory */ 3060 kfree(dev->eedata); 3061 dev->eedata = NULL; 3062 3063 /* Allow override tuner type by a module parameter */ 3064 if (tuner >= 0) 3065 dev->tuner_type = tuner; 3066 } 3067 3068 void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) 3069 { 3070 memset(ctl, 0, sizeof(*ctl)); 3071 3072 ctl->fname = XC2028_DEFAULT_FIRMWARE; 3073 ctl->max_len = 64; 3074 ctl->mts = em28xx_boards[dev->model].mts_firmware; 3075 3076 switch (dev->model) { 3077 case EM2880_BOARD_EMPIRE_DUAL_TV: 3078 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: 3079 case EM2882_BOARD_TERRATEC_HYBRID_XS: 3080 ctl->demod = XC3028_FE_ZARLINK456; 3081 break; 3082 case EM2880_BOARD_TERRATEC_HYBRID_XS: 3083 case EM2880_BOARD_TERRATEC_HYBRID_XS_FR: 3084 case EM2881_BOARD_PINNACLE_HYBRID_PRO: 3085 ctl->demod = XC3028_FE_ZARLINK456; 3086 break; 3087 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: 3088 case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E: 3089 ctl->demod = XC3028_FE_DEFAULT; 3090 break; 3091 case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600: 3092 ctl->demod = XC3028_FE_DEFAULT; 3093 ctl->fname = XC3028L_DEFAULT_FIRMWARE; 3094 break; 3095 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: 3096 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: 3097 case EM2880_BOARD_PINNACLE_PCTV_HD_PRO: 3098 /* FIXME: Better to specify the needed IF */ 3099 ctl->demod = XC3028_FE_DEFAULT; 3100 break; 3101 case EM2883_BOARD_KWORLD_HYBRID_330U: 3102 case EM2882_BOARD_DIKOM_DK300: 3103 case EM2882_BOARD_KWORLD_VS_DVBT: 3104 ctl->demod = XC3028_FE_CHINA; 3105 ctl->fname = XC2028_DEFAULT_FIRMWARE; 3106 break; 3107 case EM2882_BOARD_EVGA_INDTUBE: 3108 ctl->demod = XC3028_FE_CHINA; 3109 ctl->fname = XC3028L_DEFAULT_FIRMWARE; 3110 break; 3111 default: 3112 ctl->demod = XC3028_FE_OREN538; 3113 } 3114 } 3115 EXPORT_SYMBOL_GPL(em28xx_setup_xc3028); 3116 3117 static void request_module_async(struct work_struct *work) 3118 { 3119 struct em28xx *dev = container_of(work, 3120 struct em28xx, request_module_wk); 3121 3122 /* 3123 * The em28xx extensions can be modules or builtin. If the 3124 * modules are already loaded or are built in, those extensions 3125 * can be initialised right now. Otherwise, the module init 3126 * code will do it. 3127 */ 3128 3129 /* 3130 * Devicdes with an audio-only interface also have a V4L/DVB/RC 3131 * interface. Don't register extensions twice on those devices. 3132 */ 3133 if (dev->is_audio_only) { 3134 #if defined(CONFIG_MODULES) && defined(MODULE) 3135 request_module("em28xx-alsa"); 3136 #endif 3137 return; 3138 } 3139 3140 em28xx_init_extension(dev); 3141 3142 #if defined(CONFIG_MODULES) && defined(MODULE) 3143 if (dev->has_video) 3144 request_module("em28xx-v4l"); 3145 if (dev->usb_audio_type == EM28XX_USB_AUDIO_CLASS) 3146 request_module("snd-usb-audio"); 3147 else if (dev->usb_audio_type == EM28XX_USB_AUDIO_VENDOR) 3148 request_module("em28xx-alsa"); 3149 if (dev->board.has_dvb) 3150 request_module("em28xx-dvb"); 3151 if (dev->board.buttons || 3152 ((dev->board.ir_codes || dev->board.has_ir_i2c) && !disable_ir)) 3153 request_module("em28xx-rc"); 3154 #endif /* CONFIG_MODULES */ 3155 } 3156 3157 static void request_modules(struct em28xx *dev) 3158 { 3159 INIT_WORK(&dev->request_module_wk, request_module_async); 3160 schedule_work(&dev->request_module_wk); 3161 } 3162 3163 static void flush_request_modules(struct em28xx *dev) 3164 { 3165 flush_work(&dev->request_module_wk); 3166 } 3167 3168 static int em28xx_media_device_init(struct em28xx *dev, 3169 struct usb_device *udev) 3170 { 3171 #ifdef CONFIG_MEDIA_CONTROLLER 3172 struct media_device *mdev; 3173 3174 mdev = kzalloc(sizeof(*mdev), GFP_KERNEL); 3175 if (!mdev) 3176 return -ENOMEM; 3177 3178 if (udev->product) 3179 media_device_usb_init(mdev, udev, udev->product); 3180 else if (udev->manufacturer) 3181 media_device_usb_init(mdev, udev, udev->manufacturer); 3182 else 3183 media_device_usb_init(mdev, udev, dev_name(&dev->intf->dev)); 3184 3185 dev->media_dev = mdev; 3186 #endif 3187 return 0; 3188 } 3189 3190 static void em28xx_unregister_media_device(struct em28xx *dev) 3191 { 3192 3193 #ifdef CONFIG_MEDIA_CONTROLLER 3194 if (dev->media_dev) { 3195 media_device_unregister(dev->media_dev); 3196 media_device_cleanup(dev->media_dev); 3197 kfree(dev->media_dev); 3198 dev->media_dev = NULL; 3199 } 3200 #endif 3201 } 3202 3203 /* 3204 * em28xx_release_resources() 3205 * unregisters the v4l2,i2c and usb devices 3206 * called when the device gets disconnected or at module unload 3207 */ 3208 static void em28xx_release_resources(struct em28xx *dev) 3209 { 3210 struct usb_device *udev = interface_to_usbdev(dev->intf); 3211 3212 /*FIXME: I2C IR should be disconnected */ 3213 3214 mutex_lock(&dev->lock); 3215 3216 em28xx_unregister_media_device(dev); 3217 3218 if (dev->def_i2c_bus) 3219 em28xx_i2c_unregister(dev, 1); 3220 em28xx_i2c_unregister(dev, 0); 3221 3222 usb_put_dev(udev); 3223 3224 /* Mark device as unused */ 3225 clear_bit(dev->devno, em28xx_devused); 3226 3227 mutex_unlock(&dev->lock); 3228 }; 3229 3230 /** 3231 * em28xx_free_device() - Free em28xx device 3232 * 3233 * @ref: struct kref for em28xx device 3234 * 3235 * This is called when all extensions and em28xx core unregisters a device 3236 */ 3237 void em28xx_free_device(struct kref *ref) 3238 { 3239 struct em28xx *dev = kref_to_dev(ref); 3240 3241 dev_info(&dev->intf->dev, "Freeing device\n"); 3242 3243 if (!dev->disconnected) 3244 em28xx_release_resources(dev); 3245 3246 kfree(dev->alt_max_pkt_size_isoc); 3247 kfree(dev); 3248 } 3249 EXPORT_SYMBOL_GPL(em28xx_free_device); 3250 3251 /* 3252 * em28xx_init_dev() 3253 * allocates and inits the device structs, registers i2c bus and v4l device 3254 */ 3255 static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, 3256 struct usb_interface *interface, 3257 int minor) 3258 { 3259 int retval; 3260 const char *chip_name = NULL; 3261 3262 dev->intf = interface; 3263 mutex_init(&dev->ctrl_urb_lock); 3264 spin_lock_init(&dev->slock); 3265 3266 dev->em28xx_write_regs = em28xx_write_regs; 3267 dev->em28xx_read_reg = em28xx_read_reg; 3268 dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len; 3269 dev->em28xx_write_regs_req = em28xx_write_regs_req; 3270 dev->em28xx_read_reg_req = em28xx_read_reg_req; 3271 dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800; 3272 3273 em28xx_set_model(dev); 3274 3275 dev->wait_after_write = 5; 3276 3277 /* Based on the Chip ID, set the device configuration */ 3278 retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID); 3279 if (retval > 0) { 3280 dev->chip_id = retval; 3281 3282 switch (dev->chip_id) { 3283 case CHIP_ID_EM2800: 3284 chip_name = "em2800"; 3285 break; 3286 case CHIP_ID_EM2710: 3287 chip_name = "em2710"; 3288 break; 3289 case CHIP_ID_EM2750: 3290 chip_name = "em2750"; 3291 break; 3292 case CHIP_ID_EM2765: 3293 chip_name = "em2765"; 3294 dev->wait_after_write = 0; 3295 dev->is_em25xx = 1; 3296 dev->eeprom_addrwidth_16bit = 1; 3297 break; 3298 case CHIP_ID_EM2820: 3299 chip_name = "em2710/2820"; 3300 if (le16_to_cpu(udev->descriptor.idVendor) == 0xeb1a) { 3301 __le16 idProd = udev->descriptor.idProduct; 3302 3303 if (le16_to_cpu(idProd) == 0x2710) 3304 chip_name = "em2710"; 3305 else if (le16_to_cpu(idProd) == 0x2820) 3306 chip_name = "em2820"; 3307 } 3308 /* NOTE: the em2820 is used in webcams, too ! */ 3309 break; 3310 case CHIP_ID_EM2840: 3311 chip_name = "em2840"; 3312 break; 3313 case CHIP_ID_EM2860: 3314 chip_name = "em2860"; 3315 break; 3316 case CHIP_ID_EM2870: 3317 chip_name = "em2870"; 3318 dev->wait_after_write = 0; 3319 break; 3320 case CHIP_ID_EM2874: 3321 chip_name = "em2874"; 3322 dev->wait_after_write = 0; 3323 dev->eeprom_addrwidth_16bit = 1; 3324 break; 3325 case CHIP_ID_EM28174: 3326 chip_name = "em28174"; 3327 dev->wait_after_write = 0; 3328 dev->eeprom_addrwidth_16bit = 1; 3329 break; 3330 case CHIP_ID_EM28178: 3331 chip_name = "em28178"; 3332 dev->wait_after_write = 0; 3333 dev->eeprom_addrwidth_16bit = 1; 3334 break; 3335 case CHIP_ID_EM2883: 3336 chip_name = "em2882/3"; 3337 dev->wait_after_write = 0; 3338 break; 3339 case CHIP_ID_EM2884: 3340 chip_name = "em2884"; 3341 dev->wait_after_write = 0; 3342 dev->eeprom_addrwidth_16bit = 1; 3343 break; 3344 } 3345 } 3346 if (!chip_name) 3347 dev_info(&dev->intf->dev, 3348 "unknown em28xx chip ID (%d)\n", dev->chip_id); 3349 else 3350 dev_info(&dev->intf->dev, "chip ID is %s\n", chip_name); 3351 3352 em28xx_media_device_init(dev, udev); 3353 3354 if (dev->is_audio_only) { 3355 retval = em28xx_audio_setup(dev); 3356 if (retval) 3357 return -ENODEV; 3358 em28xx_init_extension(dev); 3359 3360 return 0; 3361 } 3362 3363 em28xx_pre_card_setup(dev); 3364 3365 if (!dev->board.is_em2800) { 3366 /* Resets I2C speed */ 3367 retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed); 3368 if (retval < 0) { 3369 dev_err(&dev->intf->dev, 3370 "%s: em28xx_write_reg failed! retval [%d]\n", 3371 __func__, retval); 3372 return retval; 3373 } 3374 } 3375 3376 rt_mutex_init(&dev->i2c_bus_lock); 3377 3378 /* register i2c bus 0 */ 3379 if (dev->board.is_em2800) 3380 retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM2800); 3381 else 3382 retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM28XX); 3383 if (retval < 0) { 3384 dev_err(&dev->intf->dev, 3385 "%s: em28xx_i2c_register bus 0 - error [%d]!\n", 3386 __func__, retval); 3387 return retval; 3388 } 3389 3390 /* register i2c bus 1 */ 3391 if (dev->def_i2c_bus) { 3392 if (dev->is_em25xx) 3393 retval = em28xx_i2c_register(dev, 1, 3394 EM28XX_I2C_ALGO_EM25XX_BUS_B); 3395 else 3396 retval = em28xx_i2c_register(dev, 1, 3397 EM28XX_I2C_ALGO_EM28XX); 3398 if (retval < 0) { 3399 dev_err(&dev->intf->dev, 3400 "%s: em28xx_i2c_register bus 1 - error [%d]!\n", 3401 __func__, retval); 3402 3403 em28xx_i2c_unregister(dev, 0); 3404 3405 return retval; 3406 } 3407 } 3408 3409 /* Do board specific init and eeprom reading */ 3410 em28xx_card_setup(dev); 3411 3412 return 0; 3413 } 3414 3415 /* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */ 3416 #define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) 3417 3418 /* 3419 * em28xx_usb_probe() 3420 * checks for supported devices 3421 */ 3422 static int em28xx_usb_probe(struct usb_interface *interface, 3423 const struct usb_device_id *id) 3424 { 3425 struct usb_device *udev; 3426 struct em28xx *dev = NULL; 3427 int retval; 3428 bool has_vendor_audio = false, has_video = false, has_dvb = false; 3429 int i, nr, try_bulk; 3430 const int ifnum = interface->altsetting[0].desc.bInterfaceNumber; 3431 char *speed; 3432 3433 udev = usb_get_dev(interface_to_usbdev(interface)); 3434 3435 /* Check to see next free device and mark as used */ 3436 do { 3437 nr = find_first_zero_bit(em28xx_devused, EM28XX_MAXBOARDS); 3438 if (nr >= EM28XX_MAXBOARDS) { 3439 /* No free device slots */ 3440 dev_err(&interface->dev, 3441 "Driver supports up to %i em28xx boards.\n", 3442 EM28XX_MAXBOARDS); 3443 retval = -ENOMEM; 3444 goto err_no_slot; 3445 } 3446 } while (test_and_set_bit(nr, em28xx_devused)); 3447 3448 /* Don't register audio interfaces */ 3449 if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { 3450 dev_err(&interface->dev, 3451 "audio device (%04x:%04x): interface %i, class %i\n", 3452 le16_to_cpu(udev->descriptor.idVendor), 3453 le16_to_cpu(udev->descriptor.idProduct), 3454 ifnum, 3455 interface->altsetting[0].desc.bInterfaceClass); 3456 3457 retval = -ENODEV; 3458 goto err; 3459 } 3460 3461 /* allocate memory for our device state and initialize it */ 3462 dev = kzalloc(sizeof(*dev), GFP_KERNEL); 3463 if (dev == NULL) { 3464 retval = -ENOMEM; 3465 goto err; 3466 } 3467 3468 /* compute alternate max packet sizes */ 3469 dev->alt_max_pkt_size_isoc = 3470 kmalloc(sizeof(dev->alt_max_pkt_size_isoc[0]) * 3471 interface->num_altsetting, GFP_KERNEL); 3472 if (dev->alt_max_pkt_size_isoc == NULL) { 3473 kfree(dev); 3474 retval = -ENOMEM; 3475 goto err; 3476 } 3477 3478 /* Get endpoints */ 3479 for (i = 0; i < interface->num_altsetting; i++) { 3480 int ep; 3481 3482 for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) { 3483 const struct usb_endpoint_descriptor *e; 3484 int sizedescr, size; 3485 3486 e = &interface->altsetting[i].endpoint[ep].desc; 3487 3488 sizedescr = le16_to_cpu(e->wMaxPacketSize); 3489 size = sizedescr & 0x7ff; 3490 3491 if (udev->speed == USB_SPEED_HIGH) 3492 size = size * hb_mult(sizedescr); 3493 3494 if (usb_endpoint_dir_in(e)) { 3495 switch (e->bEndpointAddress) { 3496 case 0x82: 3497 has_video = true; 3498 if (usb_endpoint_xfer_isoc(e)) { 3499 dev->analog_ep_isoc = 3500 e->bEndpointAddress; 3501 dev->alt_max_pkt_size_isoc[i] = size; 3502 } else if (usb_endpoint_xfer_bulk(e)) { 3503 dev->analog_ep_bulk = 3504 e->bEndpointAddress; 3505 } 3506 break; 3507 case 0x83: 3508 if (usb_endpoint_xfer_isoc(e)) { 3509 has_vendor_audio = true; 3510 } else { 3511 dev_err(&interface->dev, 3512 "error: skipping audio endpoint 0x83, because it uses bulk transfers !\n"); 3513 } 3514 break; 3515 case 0x84: 3516 if (has_video && 3517 (usb_endpoint_xfer_bulk(e))) { 3518 dev->analog_ep_bulk = 3519 e->bEndpointAddress; 3520 } else { 3521 if (usb_endpoint_xfer_isoc(e)) { 3522 if (size > dev->dvb_max_pkt_size_isoc) { 3523 has_dvb = true; /* see NOTE (~) */ 3524 dev->dvb_ep_isoc = e->bEndpointAddress; 3525 dev->dvb_max_pkt_size_isoc = size; 3526 dev->dvb_alt_isoc = i; 3527 } 3528 } else { 3529 has_dvb = true; 3530 dev->dvb_ep_bulk = e->bEndpointAddress; 3531 } 3532 } 3533 break; 3534 } 3535 } 3536 /* NOTE: 3537 * Old logic with support for isoc transfers only was: 3538 * 0x82 isoc => analog 3539 * 0x83 isoc => audio 3540 * 0x84 isoc => digital 3541 * 3542 * New logic with support for bulk transfers 3543 * 0x82 isoc => analog 3544 * 0x82 bulk => analog 3545 * 0x83 isoc* => audio 3546 * 0x84 isoc => digital 3547 * 0x84 bulk => analog or digital** 3548 * (*: audio should always be isoc) 3549 * (**: analog, if ep 0x82 is isoc, otherwise digital) 3550 * 3551 * The new logic preserves backwards compatibility and 3552 * reflects the endpoint configurations we have seen 3553 * so far. But there might be devices for which this 3554 * logic is not sufficient... 3555 */ 3556 /* 3557 * NOTE (~): some manufacturers (e.g. Terratec) disable 3558 * endpoints by setting wMaxPacketSize to 0 bytes for 3559 * all alt settings. So far, we've seen this for 3560 * DVB isoc endpoints only. 3561 */ 3562 } 3563 } 3564 3565 if (!(has_vendor_audio || has_video || has_dvb)) { 3566 retval = -ENODEV; 3567 goto err_free; 3568 } 3569 3570 switch (udev->speed) { 3571 case USB_SPEED_LOW: 3572 speed = "1.5"; 3573 break; 3574 case USB_SPEED_UNKNOWN: 3575 case USB_SPEED_FULL: 3576 speed = "12"; 3577 break; 3578 case USB_SPEED_HIGH: 3579 speed = "480"; 3580 break; 3581 default: 3582 speed = "unknown"; 3583 } 3584 3585 dev_err(&interface->dev, 3586 "New device %s %s @ %s Mbps (%04x:%04x, interface %d, class %d)\n", 3587 udev->manufacturer ? udev->manufacturer : "", 3588 udev->product ? udev->product : "", 3589 speed, 3590 le16_to_cpu(udev->descriptor.idVendor), 3591 le16_to_cpu(udev->descriptor.idProduct), 3592 ifnum, 3593 interface->altsetting->desc.bInterfaceNumber); 3594 3595 /* 3596 * Make sure we have 480 Mbps of bandwidth, otherwise things like 3597 * video stream wouldn't likely work, since 12 Mbps is generally 3598 * not enough even for most Digital TV streams. 3599 */ 3600 if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) { 3601 dev_err(&interface->dev, "Device initialization failed.\n"); 3602 dev_err(&interface->dev, 3603 "Device must be connected to a high-speed USB 2.0 port.\n"); 3604 retval = -ENODEV; 3605 goto err_free; 3606 } 3607 3608 dev->devno = nr; 3609 dev->model = id->driver_info; 3610 dev->alt = -1; 3611 dev->is_audio_only = has_vendor_audio && !(has_video || has_dvb); 3612 dev->has_video = has_video; 3613 dev->ifnum = ifnum; 3614 3615 if (has_vendor_audio) { 3616 dev_err(&interface->dev, 3617 "Audio interface %i found (Vendor Class)\n", ifnum); 3618 dev->usb_audio_type = EM28XX_USB_AUDIO_VENDOR; 3619 } 3620 /* Checks if audio is provided by a USB Audio Class interface */ 3621 for (i = 0; i < udev->config->desc.bNumInterfaces; i++) { 3622 struct usb_interface *uif = udev->config->interface[i]; 3623 3624 if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { 3625 if (has_vendor_audio) 3626 dev_err(&interface->dev, 3627 "em28xx: device seems to have vendor AND usb audio class interfaces !\n" 3628 "\t\tThe vendor interface will be ignored. Please contact the developers <linux-media@vger.kernel.org>\n"); 3629 dev->usb_audio_type = EM28XX_USB_AUDIO_CLASS; 3630 break; 3631 } 3632 } 3633 3634 if (has_video) 3635 dev_err(&interface->dev, "Video interface %i found:%s%s\n", 3636 ifnum, 3637 dev->analog_ep_bulk ? " bulk" : "", 3638 dev->analog_ep_isoc ? " isoc" : ""); 3639 if (has_dvb) 3640 dev_err(&interface->dev, "DVB interface %i found:%s%s\n", 3641 ifnum, 3642 dev->dvb_ep_bulk ? " bulk" : "", 3643 dev->dvb_ep_isoc ? " isoc" : ""); 3644 3645 dev->num_alt = interface->num_altsetting; 3646 3647 if ((unsigned)card[nr] < em28xx_bcount) 3648 dev->model = card[nr]; 3649 3650 /* save our data pointer in this interface device */ 3651 usb_set_intfdata(interface, dev); 3652 3653 /* allocate device struct and check if the device is a webcam */ 3654 mutex_init(&dev->lock); 3655 retval = em28xx_init_dev(dev, udev, interface, nr); 3656 if (retval) { 3657 goto err_free; 3658 } 3659 3660 if (usb_xfer_mode < 0) { 3661 if (dev->board.is_webcam) 3662 try_bulk = 1; 3663 else 3664 try_bulk = 0; 3665 } else { 3666 try_bulk = usb_xfer_mode > 0; 3667 } 3668 3669 /* Disable V4L2 if the device doesn't have a decoder */ 3670 if (has_video && 3671 dev->board.decoder == EM28XX_NODECODER && !dev->board.is_webcam) { 3672 dev_err(&interface->dev, 3673 "Currently, V4L2 is not supported on this model\n"); 3674 has_video = false; 3675 dev->has_video = false; 3676 } 3677 3678 /* Select USB transfer types to use */ 3679 if (has_video) { 3680 if (!dev->analog_ep_isoc || (try_bulk && dev->analog_ep_bulk)) 3681 dev->analog_xfer_bulk = 1; 3682 dev_err(&interface->dev, "analog set to %s mode.\n", 3683 dev->analog_xfer_bulk ? "bulk" : "isoc"); 3684 } 3685 if (has_dvb) { 3686 if (!dev->dvb_ep_isoc || (try_bulk && dev->dvb_ep_bulk)) 3687 dev->dvb_xfer_bulk = 1; 3688 dev_err(&interface->dev, "dvb set to %s mode.\n", 3689 dev->dvb_xfer_bulk ? "bulk" : "isoc"); 3690 } 3691 3692 kref_init(&dev->ref); 3693 3694 request_modules(dev); 3695 3696 /* 3697 * Do it at the end, to reduce dynamic configuration changes during 3698 * the device init. Yet, as request_modules() can be async, the 3699 * topology will likely change after the load of the em28xx subdrivers. 3700 */ 3701 #ifdef CONFIG_MEDIA_CONTROLLER 3702 retval = media_device_register(dev->media_dev); 3703 #endif 3704 3705 return 0; 3706 3707 err_free: 3708 kfree(dev->alt_max_pkt_size_isoc); 3709 kfree(dev); 3710 3711 err: 3712 clear_bit(nr, em28xx_devused); 3713 3714 err_no_slot: 3715 usb_put_dev(udev); 3716 return retval; 3717 } 3718 3719 /* 3720 * em28xx_usb_disconnect() 3721 * called when the device gets disconnected 3722 * video device will be unregistered on v4l2_close in case it is still open 3723 */ 3724 static void em28xx_usb_disconnect(struct usb_interface *interface) 3725 { 3726 struct em28xx *dev; 3727 3728 dev = usb_get_intfdata(interface); 3729 usb_set_intfdata(interface, NULL); 3730 3731 if (!dev) 3732 return; 3733 3734 dev->disconnected = 1; 3735 3736 dev_err(&dev->intf->dev, "Disconnecting\n"); 3737 3738 flush_request_modules(dev); 3739 3740 em28xx_close_extension(dev); 3741 3742 em28xx_release_resources(dev); 3743 kref_put(&dev->ref, em28xx_free_device); 3744 } 3745 3746 static int em28xx_usb_suspend(struct usb_interface *interface, 3747 pm_message_t message) 3748 { 3749 struct em28xx *dev; 3750 3751 dev = usb_get_intfdata(interface); 3752 if (!dev) 3753 return 0; 3754 em28xx_suspend_extension(dev); 3755 return 0; 3756 } 3757 3758 static int em28xx_usb_resume(struct usb_interface *interface) 3759 { 3760 struct em28xx *dev; 3761 3762 dev = usb_get_intfdata(interface); 3763 if (!dev) 3764 return 0; 3765 em28xx_resume_extension(dev); 3766 return 0; 3767 } 3768 3769 static struct usb_driver em28xx_usb_driver = { 3770 .name = "em28xx", 3771 .probe = em28xx_usb_probe, 3772 .disconnect = em28xx_usb_disconnect, 3773 .suspend = em28xx_usb_suspend, 3774 .resume = em28xx_usb_resume, 3775 .reset_resume = em28xx_usb_resume, 3776 .id_table = em28xx_id_table, 3777 }; 3778 3779 module_usb_driver(em28xx_usb_driver); 3780